JK BMS BLE - Sensors update time

[mariusghiata]

Hello,
I have connected my DEYE SUN-8k-SG01LP1-EU to my JK BMS using ESP32_Li-ion_BLE_jk-bms-can.yaml. After a few hours I notice that my sensors were updating after a long time.
For example discharging_power sensor last update 30min ago (even if the power consumption is different every 10 seconds).

Before using this yaml for the CAN communication I used another the yaml from syssi (same with BLE but no CAN) and the sensors were updating every 2-5 second or even instantly. Even the cell voltage / resistance were updating instantly.

What do you recommend should I do (or what did I do wrong?).

Please if you can help me in beginner language :)

Thank you,

[Sleeper85]

Hi,

Replace :

logger:
  level: INFO

By :

logger:
  level: DEBUG

Some people have had similar issues with INFO mode.

[mariusghiata]

It worked. Thank you!

[shvmm]

Hello, I have connected my DEYE SUN-8k-SG01LP1-EU to my JK BMS using ESP32_Li-ion_BLE_jk-bms-can.yaml. After a few hours I notice that my sensors were updating after a long time. For example discharging_power sensor last update 30min ago (even if the power consumption is different every 10 seconds).

Before using this yaml for the CAN communication I used another the yaml from syssi (same with BLE but no CAN) and the sensors were updating every 2-5 second or even instantly. Even the cell voltage / resistance were updating instantly.

What do you recommend should I do (or what did I do wrong?).

Please if you can help me in beginner language :)

Thank you,

I'm also facing the same issue as you with HA sensors not updating as frequently as they used to.

In my production system, I was using LOGGER Level: ERROR
While LOGGING LEVELS being a likely culprit, it may be possible that other changes made previously might be behind this.
For example, recent release of Home assistant has wonky behaviour of sliders and date-pickers, even on new installations.

[shvmm]

Also, another question to ask: Did your HA install got updated recently??