reServer Industrial | Seeed Studio Wiki

[giscus[bot]]

reServer Industrial | Seeed Studio Wiki

reServer Industrial Getting Started

https://wiki.seeedstudio.com/reServer_Industrial_Getting_Started/

[paymentinapp]

I purchased a reServer industrial J3010( order#4000175171).

1. I would like to know a CCTV camera connected on device LAN port. How can I know the IP address of the camera?
2. I understood CCTV can get power via POE. Do I need to configure it? When I try it based on below link, There is no 'gpio' folder(cd /sys/class/gpio)
   https://wiki.seeedstudio.com/reServer_Industrial_Getting_Started/#gigabit-ethernet-connectors

[qunanan]

You have to manually set the IP address to access the camera, I think you need to check the camera manual for more details.

[park-jihoon-aiv]

I have purchased a Reserver product and would like to power it using the PoE LAN port. However, when I run the command sudo cat /sys/kernel/debug/gpio as mentioned in the manual, I cannot see gpiochip2 (300-315), making it impossible to configure. Could you advise me on how to resolve this issue?

[ZhuYaoHui1998]

which Jetpack in your reserver device? Jetpack 5.1.1 or Jetpack 6.0. and which device did you purchase? j3010 J3011 J4011 J4012 or J2302

[park-jihoon-aiv]

The device is J4012 and Jetpack is 5.1.3-b29
R35 (release), REVISION: 5.0