Help to deploy and test CORTX on an old PC instead of simulation/hypervisor. #575
-
|
I would like to build a system with CORTX deployed, so I could perform actual debugging and performance check instead of simulation/virtual appliance (hypervisor). Could anyone advise if this is possible with an old Intel processor based PC? I would imagine an old PC with HDDs installed should do the job? Thanks in advance for any suggestion or help provided. |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments
-
|
@mandarjoshi-stx, Do you have any idea ? |
Beta Was this translation helpful? Give feedback.
-
|
There are almost the same procedures to deploy CORTX in VM/Hypervisor, or to deploy CORTX in a PC/Server. You can following the following document to do so: and But please note, you can do "actual debugging". But if you want to do "performance check", I don't think an old Intel processor based PC is good enough. |
Beta Was this translation helpful? Give feedback.
There are almost the same procedures to deploy CORTX in VM/Hypervisor, or to deploy CORTX in a PC/Server.
You can following the following document to do so:
https://github.com/Seagate/cortx/blob/main/doc/Cluster_Setup.md
and
https://github.com/Seagate/cortx-motr/blob/main/doc/Quick-Start-Guide.rst
and
https://github.com/Seagate/cortx-s3server/blob/main/docs/CORTX-S3%20Server%20Quick%20Start%20Guide.md
But please note, you can do "actual debugging". But if you want to do "performance check", I don't think an old Intel processor based PC is good enough.