Register

[Vaibhavdixit02]

@JuliaRegistrator register()

@JuliaRegistrator register subdir=lib/OptimizationBBO
@JuliaRegistrator register subdir=lib/OptimizationCMAEvolutionStrategy
@JuliaRegistrator register subdir=lib/OptimizationEvolutionary
@JuliaRegistrator register subdir=lib/OptimizationFlux
@JuliaRegistrator register subdir=lib/OptimizationGCMAES
@JuliaRegistrator register subdir=lib/OptimizationManopt
@JuliaRegistrator register subdir=lib/OptimizationMetaheuristics
@JuliaRegistrator register subdir=lib/OptimizationMOI
@JuliaRegistrator register subdir=lib/OptimizationMultistartOptimization
@JuliaRegistrator register subdir=lib/OptimizationNLopt
@JuliaRegistrator register subdir=lib/OptimizationNLPModels
@JuliaRegistrator register subdir=lib/OptimizationNOMAD
@JuliaRegistrator register subdir=lib/OptimizationOptimJL
@JuliaRegistrator register subdir=lib/OptimizationOptimisers
@JuliaRegistrator register subdir=lib/OptimizationPolyalgorithms
@JuliaRegistrator register subdir=lib/OptimizationPRIMA
@JuliaRegistrator register subdir=lib/OptimizationQuadDIRECT
@JuliaRegistrator register subdir=lib/OptimizationSpeedMapping

[JuliaRegistrator]

Error while trying to register: Version 0.1.0 already exists

[Vaibhavdixit02]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/18539

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.1 -m "<description of version>" 568f4a67c445e964c60f451b84329cc94606026f
git push origin v0.1.1

[Vaibhavdixit02]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/18539

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.1 -m "<description of version>" 2f89f30d299b7a15a278cec6ba6f6d12e46f954e
git push origin v0.1.1

[Vaibhavdixit02]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/19336

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.2 -m "<description of version>" 4e881b842316e9feb072023e6dbb37e169c7377f
git push origin v0.1.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/19336

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.2 -m "<description of version>" 9664d8a0f9965fbfd09086a20b6e52985cf5a170
git push origin v0.1.2

[Vaibhavdixit02]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/19764

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.2 -m "<description of version>" 6469b5ff5d53acb230c44bcce2b63c54d853dcb3
git push origin v0.1.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/19941

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.3 -m "<description of version>" 0ef7912ee558d08e7a809030c66e14e92c3adb26
git push origin v0.1.3

Also, note the warning: Version 0.1.3 skips over 0.1.2
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/19764

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.2 -m "<description of version>" c81db166d6670cc0458b0cf19bcf115368563a23
git push origin v0.1.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/19764

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.2 -m "<description of version>" fe42bda0d557acd9edeea7fe0653f853281cf6ad
git push origin v0.1.2

[Vaibhavdixit02]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/20143

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.3 -m "<description of version>" 0a9e6861f7d8fa808c68447ecf5c167a1fdbab70
git push origin v0.1.3

[Vaibhavdixit02]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/20143

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.3 -m "<description of version>" ff0cc8df62113d09adbd83236fecd474665ea0f2
git push origin v0.1.3

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/20949

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.0 -m "<description of version>" 1aaaa4ea8384a44a93e68ed5431a3f05a92b2022
git push origin v0.2.0

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/123420

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.1.0 -m "<description of version>" 49c17231f93a5984406d2f48085e1e1346f2ca75
git push origin v4.1.0

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/123421

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a OptimizationMOI-v0.5.2 -m "<description of version>" 49c17231f93a5984406d2f48085e1e1346f2ca75
git push origin OptimizationMOI-v0.5.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/124456

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.1.1 -m "<description of version>" edff6e7381922be86ce52feeb5bae34fa0e4e80a
git push origin v4.1.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/127353

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.1.2 -m "<description of version>" 0436a19a28594b0cbb4a0619d665c42fa0367b6d
git push origin v4.1.2

[ChrisRackauckas]

@JuliaRegistrator register subdir=lib/OptimizationOptimJL

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/129518

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a OptimizationOptimJL-v0.4.2 -m "<description of version>" 8f6bb3bf0eedaea0ccd03020631c9230a093e659
git push origin OptimizationOptimJL-v0.4.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/129980

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.2.0 -m "<description of version>" 9fc7f3a7e607d99f2b7fb6de829a533536644f3a
git push origin v4.2.0

[oscardssmith]

@JuliaRegistrator register subdir=lib/OptimizationBBO

[oscardssmith]

@JuliaRegistrator register subdir=lib/OptimizationMOI

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/130087

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a OptimizationBBO-v0.4.1 -m "<description of version>" b4b1a07edc2a6265504a32ef1c8680e9529ed27e
git push origin OptimizationBBO-v0.4.1

[oscardssmith]

@JuliaRegistrator register subdir=lib/OptimizationNOMAD

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/130088

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a OptimizationMOI-v0.5.3 -m "<description of version>" b4b1a07edc2a6265504a32ef1c8680e9529ed27e
git push origin OptimizationMOI-v0.5.3

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/130089

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a OptimizationNOMAD-v0.3.1 -m "<description of version>" b4b1a07edc2a6265504a32ef1c8680e9529ed27e
git push origin OptimizationNOMAD-v0.3.1

[ChrisRackauckas]

@JuliaRegistrator register subdir=lib/OptimizationOptimJL

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/130401

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a OptimizationOptimJL-v0.4.3 -m "<description of version>" d994f85d9f402e4018cef8ef8bc772f9e756f711
git push origin OptimizationOptimJL-v0.4.3

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/131045

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.3.0 -m "<description of version>" b6ce64c1e9b7ae2e3ced55f70dbb3224bdd10959
git push origin v4.3.0