cream-dxf.ulp

//
// Export the EAGLE cream layers to DXF for the Craft-ROBO cutting plotter.
//
// Copyright (c) 2010 SWITCHSCIENCE, Inc.
// Copyright (c) 2012 Yoshihiro TSUBOI
// Copyright (c) 2013 Yuuki Uno, NYAMFG.
// Copyright (c) 2015 Junichi Akita (akita11), added board outline cut

// Configuration
real SHRINK_WIDTH = 0.00;		// unit: mm
real MIN_CORNERRADIUS = 0.05;		// unit: mm
real E6_SCALE = 32; // The internal resolution of EAGLE 6 has been increased by a factor of 32. For detail, see UPDATE_en.txt

// Flags
int CORNERCUT = 0;			// boolean
int CUTTIMES = 1;
int EAGLE6 = 0;
int IGNORESTOP = 1;
int OUTLINE = 0;

string HEADER =
"  0\n"
"SECTION\n"
"  2\n"
"HEADER\n"
"  9\n"
"$ACADVER\n"
"  1\n"
"AC1009\n"
"  9\n"
"$MEASUREMENT\n"
" 70\n"
"     1\n"				// unit: mm
"  0\n"
"ENDSEC\n"
"  0\n"
"SECTION\n"
"  2\n"
"ENTITIES\n";

string POLYLINE =
"  0\n"
"LWPOLYLINE\n"
"  8\n"
"0\n"					// layer
" 62\n"
"7\n"					// color
" 90\n"
"%d\n"					// number of points
" 70\n"
"%d\n";					// 0=open 1=close

string POLYLINE_POINT =
" 10\n"
"%f\n"
" 20\n"
"%f\n";

string LINE =
"  0\n"
"LINE\n"
"  8\n"
"0\n"					// layer
" 10\n"
"%f\n"					// start x
" 20\n"
"%f\n"					// start y
" 11\n"
"%f\n"					// end x
" 21\n"
"%f\n";					// end y

string ARC =
"  0\n"
"ARC\n"
"  8\n"
"0\n"					// layer
" 10\n"
"%f\n"					// center x
" 20\n"
"%f\n"					// center y
" 40\n"
"%f\n"					// radius
" 50\n"
"%f\n"					// start angle
" 51"
"%f\n";					// end angle

string CIRCLE =
"  0\n"
"CIRCLE\n"
"  8\n"
"0\n"					// layer
" 10\n"
"%f\n"					// center x
" 20\n"
"%f\n"					// center y
" 40\n"
"%f\n";					// radius

string TRAILER =
"  0\n"
"ENDSEC\n"
"  0\n"
"EOF\n";

int
processLayer(UL_BOARD B, int layer) {
  int count = 0;
  int cream = (layer == LAYER_TOP ? LAYER_TCREAM : LAYER_BCREAM);
  printf("%s", HEADER);
  B.elements(E) {
    E.package.contacts(C) {
      if (!C.smd)
	continue;
      if (C.smd.layer != layer)
	continue;
      if  (!((C.smd.flags & SMD_FLAG_STOP) || !IGNORESTOP))
	continue;
      if (!(C.smd.flags & SMD_FLAG_CREAM))
	continue;
      if (C.smd.dx[cream] == 0 || C.smd.dy[cream] == 0)
	continue;

      real x = C.smd.x / 10000.0;
      real y = C.smd.y / 10000.0;
      real w = C.smd.dx[cream] / 10000.0 / 2 - SHRINK_WIDTH;
      real h = C.smd.dy[cream] / 10000.0 / 2 - SHRINK_WIDTH;
    if (EAGLE6 == 1) {
      x = x / E6_SCALE;
      y = y / E6_SCALE;
      w = w / E6_SCALE;
      h = h / E6_SCALE;
    }
      real a = C.smd.angle / 180 * PI;
      real wc = w * cos(a);
      real hs = h * sin(a);
      real ws = w * sin(a);
      real hc = h * cos(a);

      real r = max(min(w, h) * C.smd.roundness / 100, MIN_CORNERRADIUS);
      if (CORNERCUT && h > r && w > r) {
	real rc = r * cos(a);
	real rs = r * sin(a);
	printf(POLYLINE, 8 * CUTTIMES + 1, 1);				// 1: closed
	printf(POLYLINE_POINT, x + wc, y + ws);				// ( w,    0)
	for (int i = 0; i < CUTTIMES; i++) {
	  printf(POLYLINE_POINT, x + wc - hs + rs, y + ws + hc - rc);	// ( w,    h-r)
	  printf(POLYLINE_POINT, x + wc - rc - hs, y + ws - rs + hc);	// ( w-r,  h)
	  printf(POLYLINE_POINT, x - wc + rc - hs, y - ws + rs + hc);	// (-w+r,  h)
	  printf(POLYLINE_POINT, x - wc - hs + rs, y - ws + hc - rc);	// (-w,    h-r)
	  printf(POLYLINE_POINT, x - wc + hs - rs, y - ws - hc + rc);	// (-w,   -h+r)
	  printf(POLYLINE_POINT, x - wc + rc + hs, y - ws + rs - hc);	// (-w+r, -h)
	  printf(POLYLINE_POINT, x + wc - rc + hs, y + ws - rs - hc);	// ( w-r, -h)
	  printf(POLYLINE_POINT, x + wc + hs - rs, y + ws - hc + rc);	// ( w,   -h+r)
	}
      } else {
	printf(POLYLINE, 4 * CUTTIMES + 1, 1);			// 1: closed
	printf(POLYLINE_POINT, x + wc, y + ws);			// ( w,  0)
	for (int i = 0; i < CUTTIMES; i++) {
	  printf(POLYLINE_POINT, x + wc - hs, y + ws + hc);	// ( w,  h)
	  printf(POLYLINE_POINT, x - wc - hs, y - ws + hc);	// (-w,  h)
	  printf(POLYLINE_POINT, x - wc + hs, y - ws - hc);	// (-w, -h)
	  printf(POLYLINE_POINT, x + wc + hs, y + ws - hc);	// ( w, -h)
	}
      }
      count++;
    }
    
    E.package.rectangles(R) {
      if (layer==LAYER_TOP && R.layer == 31) {
      	printf(POLYLINE, 4 * CUTTIMES + 1, 1);			// 1: closed
      	
        real x = (R.x1+R.x2)/2 / 10000.0;
        real y = (R.y1+R.y2)/2 / 10000.0;
        real w = (R.x2-R.x1) / 10000.0 / 2 - SHRINK_WIDTH;
        real h = (R.y2-R.y1) / 10000.0 / 2 - SHRINK_WIDTH;
      if (EAGLE6 == 1) {
        x = x / E6_SCALE;
        y = y / E6_SCALE;
        w = w / E6_SCALE;
        h = h / E6_SCALE;
      }
        real a = R.angle / 180 * PI;
        real wc = w * cos(a);
        real hs = h * sin(a);
        real ws = w * sin(a);
        real hc = h * cos(a);
        
	printf(POLYLINE, 4 * CUTTIMES + 1, 1);			// 1: closed
	printf(POLYLINE_POINT, x + wc, y + ws);			// ( w,  0)
	for (int i = 0; i < CUTTIMES; i++) {
	  printf(POLYLINE_POINT, x + wc - hs, y + ws + hc);	// ( w,  h)
	  printf(POLYLINE_POINT, x - wc - hs, y - ws + hc);	// (-w,  h)
	  printf(POLYLINE_POINT, x - wc + hs, y - ws - hc);	// (-w, -h)
	  printf(POLYLINE_POINT, x + wc + hs, y + ws - hc);	// ( w, -h)
	}
      }

      count++;
    }
  }
  // board outline
  if (OUTLINE){
    real x = (B.area.x1+B.area.x2)/2 / 10000.0;
    real y = (B.area.y1+B.area.y2)/2 / 10000.0;
    real w = (B.area.x2-B.area.x1) / 10000.0 / 2;
    real h = (B.area.y2-B.area.y1) / 10000.0 / 2;
    if (EAGLE6 == 1) {
      x = x / E6_SCALE;
      y = y / E6_SCALE;
      w = w / E6_SCALE;
      h = h / E6_SCALE;
    }
    real wc = w;
    real hs = 0;
    real ws = 0;
    real hc = h;
    printf(POLYLINE, 4*CUTTIMES + 1, 1);			// 1: closed
    printf(POLYLINE_POINT, x + wc, y + ws);			// ( w,  0)
    for (int i = 0; i < CUTTIMES; i++) {
      printf(POLYLINE_POINT, x + wc - hs, y + ws + hc);	// ( w,  h)
      printf(POLYLINE_POINT, x - wc - hs, y - ws + hc);	// (-w,  h)
      printf(POLYLINE_POINT, x - wc + hs, y - ws - hc);	// (-w, -h)
      printf(POLYLINE_POINT, x + wc + hs, y + ws - hc);	// ( w, -h)
    }
    count++;
  }
  printf("%s", TRAILER);
  return count;
}

board(B) {

  int cut_two = 1;
  int cut_corner = 0;
  int e6_mode = 0;
  int ignore_stop = 1;
  int outline = 0;
  if (EAGLE_VERSION >= 6.0) {
	  e6_mode = 1;
  };  
  real cut_width = 0.05;
  
  int run = dlgDialog("cream-dxf"){
    dlgGroup("Orientation") {
      dlgCheckBox("Cut two times for each lines.", cut_two);
      dlgCheckBox("Cut off corners of pads. The resulting pads are octagons.", cut_corner);
      dlgCheckBox("Ignore pads with no stop flag.", ignore_stop);
      dlgCheckBox("Include board outline.", outline);
      dlgHBoxLayout {
        dlgLabel("Enter the width (float mm) to shrink pads by.");
        dlgRealEdit(cut_width, 0.00, 0.10);
      };
    };
    dlgHBoxLayout {
      dlgStretch(1);
      dlgPushButton("-&Cancel") dlgReject();
      dlgPushButton("+&Run") dlgAccept();
    };
  };
  
  CUTTIMES = cut_two ? 2 : 1;
  CORNERCUT = cut_corner;
  EAGLE6 = e6_mode;
  SHRINK_WIDTH = cut_width;
  IGNORESTOP = ignore_stop;
  OUTLINE = outline;
/*  
  output("debug.log"){
    printf("%d, %d, %d, %f\n", run, CUTTIMES, CORNERCUT, SHRINK_WIDTH);
  }
*/
  
  if (run == 1) {
    int t, b;
    output(filesetext(B.name, "-tcream.dxf")) t = processLayer(B, LAYER_TOP);
    output(filesetext(B.name, "-bcream.dxf")) b = processLayer(B, LAYER_BOTTOM);

    string message;
    sprintf(message, ";DXF files generated with %d+%d objects", t, b);	// ';' for information
    dlgMessageBox(message);
  }
  
}