Status bits of radio SPI transaction should be checked #3
Labels
Radio
Anything related to controlling the hardware or communication with the ground.
Comments
TobiNakamura
added
the
Radio
liquiddandruff
added a commit
that referenced
this issue
Jun 10, 2018
Setup: - OBC/RF board set 1 compiled with STX strobe in rfTxTestSequence(). - OBC/RF board set 2 compiled with SRX strobe in rfTxTestSequence(). - In UART prompt, enter on both sets: > task resume 10 - Set 1 sample output: ... radio task (0x0) S 0x3d < 0x0f tx_underflowed:no tx_numbytes:0 S 0x3d < 0x0f TX FIFO_BYTES_AVAILABLE: 0xf S 0xbd < 0x00 RX FIFO_BYTES_AVAILABLE: 0x0 S 0x3d < 0x0f 62 Bytes Radio TX FIFO written AFTER: tx_underflowed:no tx_numbytes:62 S 0x35 < 0x02 STX strobed... S 0x3d < 0x24 StatusByte: 0x24 radio task (0x0) S 0x3d < 0x0f tx_underflowed:no tx_numbytes:0 S 0x3d < 0x0f TX FIFO_BYTES_AVAILABLE: 0xf S 0xbd < 0x00 RX FIFO_BYTES_AVAILABLE: 0x0 S 0x3d < 0x0f 62 Bytes Radio TX FIFO written AFTER: tx_underflowed:no tx_numbytes:62 S 0x35 < 0x02 STX strobed... S 0x3d < 0x24 StatusByte: 0x24 radio task (0x0) S 0x3d < 0x0f tx_underflowed:no tx_numbytes:0 S 0x3d < 0x0f TX FIFO_BYTES_AVAILABLE: 0xf S 0xbd < 0x00 RX FIFO_BYTES_AVAILABLE: 0x0 S 0x3d < 0x0f 62 Bytes Radio TX FIFO written AFTER: tx_underflowed:no tx_numbytes:62 S 0x35 < 0x02 STX strobed... S 0x3d < 0x24 StatusByte: 0x24 - Set 2 sample output: ... radio task (0x0) S 0x3d < 0x02 tx_underflowed:no tx_numbytes:62 S 0x3d < 0x02 TX FIFO_BYTES_AVAILABLE: 0x2 S 0xbd < 0x0f RX FIFO_BYTES_AVAILABLE: 0xf S 0x3d < 0x02 Radio did not write AFTER: tx_underflowed:no tx_numbytes:62 S 0x34 < 0x02 STX strobed... S 0x3d < 0x12 StatusByte: 0x12 RX Byte #0: 3e RX Byte #1: 10 RX Byte #2: 02 RX Byte #3: 03 RX Byte #4: 04 RX Byte #5: 05 RX Byte #6: 06 RX Byte #7: 07 RX Byte #8: 08 RX Byte #9: 09 RX Byte #10: 0a RX Byte #11: 0b RX Byte #12: 0c RX Byte #13: 0d RX Byte #14: 0e RX Byte #15: 0f RX Byte #16: 10 RX Byte #17: 11 RX Byte #18: 12 RX Byte #19: 13 RX Byte #20: 14 RX Byte #21: 15 RX Byte #22: 16 RX Byte #23: 17 RX Byte #24: 18 RX Byte #25: 19 RX Byte #26: 1a RX Byte #27: 1b RX Byte #28: 1c RX Byte #29: 1d RX Byte #30: 1e RX Byte #31: 1f RX Byte #32: 20 RX Byte #33: 21 RX Byte #34: 22 RX Byte #35: 23 RX Byte #36: 24 RX Byte #37: 25 RX Byte #38: 26 RX Byte #39: 27 RX Byte #40: 28 RX Byte #41: 29 RX Byte #42: 2a RX Byte #43: 2b RX Byte #44: 2c RX Byte #45: 2d RX Byte #46: 2e RX Byte #47: 2f RX Byte #48: 30 RX Byte #49: 31 RX Byte #50: 32 RX Byte #51: 33 RX Byte #52: 34 RX Byte #53: 35 RX Byte #54: 36 RX Byte #55: 37 RX Byte #56: 38 RX Byte #57: 39 RX Byte #58: 3a RX Byte #59: 3b RX Byte #60: 3c RX Byte #61: 3d RX Byte #62: e8 RX Byte #63: ba Misc: - Fix calculation of fifo bytes in writeToTxFIFO. - TODO: readFromRxFIFO changed to always queuering FIFO_RX; change to check only when needed. - Create IS_STATE macro to check state easily.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
If the spi transaction is unsuccessful, resend it.
The text was updated successfully, but these errors were encountered: