.pylintrc

[MASTER]

# Specify a configuration file.
#rcfile=

# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
#init-hook=

# Profiled execution.
profile=no

# Add files or directories to the blacklist. They should be base names, not
# paths.
ignore=test

# Pickle collected data for later comparisons.
persistent=yes

# List of plugins (as comma separated values of python modules names) to load,
# usually to register additional checkers.
load-plugins=


[MESSAGES CONTROL]

# Enable the message, report, category or checker with the given id(s). You can
# either give multiple identifier separated by comma (,) or put this option
# multiple time. See also the "--disable" option for examples.
#enable=

# Disable the message, report, category or checker with the given id(s). You
# can either give multiple identifiers separated by comma (,) or put this
# option multiple times (only on the command line, not in the configuration
# file where it should appear only once).You can also use "--disable=all" to
# disable everything first and then reenable specific checks. For example, if
# you want to run only the similarities checker, you can use "--disable=all
# --enable=similarities". If you want to run only the classes checker, but have
# no Warning level messages displayed, use"--disable=all --enable=classes
# --disable=W"
# C0302 = Too many lines in module
# W0108 = Lambda may not be necessary
# W0142 = Used * or ** magic
# W0212 = Access to a protected member of a client class
# W0602 = Using global for ... but no assignment is done
# R0903 = Too few public methods
# R0904 = Too many public methods
# R0923 = Interface not implemented
disable=similarities,C0302,W0108,W0142,W0212,W0223,W0602,R0903,R0904,R0923

[REPORTS]

# Set the output format. Available formats are text, parseable, colorized, msvs
# (visual studio) and html. You can also give a reporter class, eg
# mypackage.mymodule.MyReporterClass.
output-format=colorized

# Put messages in a separate file for each module / package specified on the
# command line instead of printing them on stdout. Reports (if any) will be
# written in a file name "pylint_global.[txt|html]".
files-output=no

# Tells whether to display a full report or only the messages
reports=yes

# Python expression which should return a note less than 10 (10 is the highest
# note). You have access to the variables errors warning, statement which
# respectively contain the number of errors / warnings messages and the total
# number of statements analyzed. This is used by the global evaluation report
# (RP0004).
evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

# Add a comment according to your evaluation note. This is used by the global
# evaluation report (RP0004).
comment=no


[SIMILARITIES]

# Minimum lines number of a similarity.
min-similarity-lines=4

# Ignore comments when computing similarities.
ignore-comments=yes

# Ignore docstrings when computing similarities.
ignore-docstrings=yes

# Ignore imports when computing similarities.
ignore-imports=no


[VARIABLES]

# Tells whether we should check for unused import in __init__ files.
init-import=no

# A regular expression matching the beginning of the name of dummy variables
# (i.e. not used).
dummy-variables-rgx=_|dummy

# List of additional names supposed to be defined in builtins. Remember that
# you should avoid to define new builtins when possible.
additional-builtins=


[BASIC]

# Required attributes for module, separated by a comma
required-attributes=

# List of builtins function names that should not be used, separated by a comma
bad-functions=filter,apply,input

# Regular expression which should only match correct module names
module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$

# Regular expression which should only match correct module level names
const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$

# Regular expression which should only match correct class names
class-rgx=[A-Z_][a-zA-Z0-9]+$

# Regular expression which should only match correct function names
function-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct method names
method-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct instance attribute names
attr-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct argument names
argument-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct variable names
variable-rgx=[a-z_][a-z0-9_]{2,30}$

# Regular expression which should only match correct list comprehension /
# generator expression variable names
inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

# Good variable names which should always be accepted, separated by a comma
# _ : generic
# i, j, k : iterator index
# n : int
# d : dict
# it : generic iterator
# x, x0, x1, xi, xs: function inputs
# y, ys: function outputs
# p, q : conventional Implies variable names p => q
# s, d1, d0 : conventional ITE (if-then-else) variable names s ? d1 : d0
# lo, hi : BDD low/high edges
# v, vs : Variable instance(s)
# bf : Boolean function
# farray : Function array
# ex : Expression
# f, g, h : Function instances
# fs : [f]
# cf : Cofactor
# tt : TruthTable instances
# sl : slice instance
# eq : equals operator
# op : Boolean operator
# Zero, One : Constant names
# Not, Or, And, Xor, Xnor, Equal, Unequal, Implies, ITE : Expression factory functions
# Nor, Nand, OneHot0, OneHot, NHot, Majority, AchillesHeel, Mux : Expression higher-order factory functions
# ForAll, Exists : Expression quantifiers
good-names=_,i,j,k,n,d,it,x,x0,x1,xi,xs,y,ys,p,q,s,d1,d0,lo,hi,v,vs,bf,farray,ex,f,g,h,cf,fs,tt,sl,eq,op,Zero,One,Not,Or,And,Xor,Xnor,Equal,Unequal,Implies,ITE,Nor,Nand,OneHot0,OneHot,NHot,Majority,AchillesHeel,Mux,ForAll,Exists

# Bad variable names which should always be refused, separated by a comma
bad-names=foo,bar,fiz,buz

# Regular expression which should only match functions or classes name which do
# not require a docstring
no-docstring-rgx=__.*__


[FORMAT]

# Maximum number of characters on a single line.
max-line-length=80

# Maximum number of lines in a module
max-module-lines=1000

# String used as indentation unit.
indent-string="    "


[TYPECHECK]

# Tells whether missing members accessed in mixin class should be ignored. A
# mixin class is detected if its name ends with "mixin" (case insensitive).
ignore-mixin-members=yes

# List of classes names for which member attributes should not be checked
# (useful for classes with attributes dynamically set).
ignored-classes=SQLObject

# When zope mode is activated, add a predefined set of Zope acquired attributes
# to generated-members.
zope=no

# List of members which are set dynamically and missed by pylint inference
# system, and so shouldn't trigger E0201 when accessed. Python regular
# expressions are accepted.
generated-members=REQUEST,acl_users,aq_parent


[MISCELLANEOUS]

# List of note tags to take in consideration, separated by a comma.
notes=FIXME,XXX,TODO


[CLASSES]

# List of interface methods to ignore, separated by a comma. This is used for
# instance to not check methods defines in Zope's Interface base class.
ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by

# List of method names used to declare (i.e. assign) instance attributes.
defining-attr-methods=__init__,__new__,setUp

# List of valid names for the first argument in a class method.
valid-classmethod-first-arg=cls

# List of valid names for the first argument in a metaclass class method.
valid-metaclass-classmethod-first-arg=mcs


[IMPORTS]

# Deprecated modules which should not be used, separated by a comma
deprecated-modules=regsub,string,TERMIOS,Bastion,rexec

# Create a graph of every (i.e. internal and external) dependencies in the
# given file (report RP0402 must not be disabled)
import-graph=

# Create a graph of external dependencies in the given file (report RP0402 must
# not be disabled)
ext-import-graph=

# Create a graph of internal dependencies in the given file (report RP0402 must
# not be disabled)
int-import-graph=


[DESIGN]

# Maximum number of arguments for function / method
max-args=6

# Argument names that match this expression will be ignored. Default to name
# with leading underscore
ignored-argument-names=_.*

# Maximum number of locals for function / method body
max-locals=25

# Maximum number of return / yield for function / method body
max-returns=6

# Maximum number of branch for function / method body
max-branchs=20

# Maximum number of statements in function / method body
max-statements=50

# Maximum number of parents for a class (see R0901).
max-parents=7

# Maximum number of attributes for a class (see R0902).
max-attributes=7

# Minimum number of public methods for a class (see R0903).
min-public-methods=2

# Maximum number of public methods for a class (see R0904).
max-public-methods=20


[EXCEPTIONS]

# Exceptions that will emit a warning when being caught. Defaults to
# "Exception"
overgeneral-exceptions=Exception