Devices shows up as 4 controllers in host mode.

[multigamesystem]

How do I stop the PICO from being recognized as 4 controllers? I only have one controller plugged in and this is causing issues with RetroArch.

[Tails86]

At the moment, there is nothing coded to easily accommodate for this. Editing src/hal/Usb/Client/Hid/usb_descriptors.h and src/hal/Usb/Client/Hid/usb_descriptors.c for a single controller would be the best solution at the moment. The value of NUMBER_OF_GAMEPADS should then flow down to the necessary components in main.

I have been caught up with trying to figure out what the best way to move forward with this project. It may simply be to support only 1 controller anyway so this can conform to XInput rather than try to use the HID spec which I have run into trouble with.

[multigamesystem]

Also this adapter was made for the Dreamcast Mini Ive been designing and building.

[Tails86]

Holy crap, dude. That's amazing! Is this a DIY thing or are you making a sellable product?

[ErykDarnowski]

That's so cool! Did you use USB type Bs to make a small imitation of the controller ports?

[multigamesystem]

Yeah it was the closest to a Dreamcast plug I could get at this scale. Although board mount USB B jacks are actually upside down compared to the Dreamcast plugs so it didnt work out as great as I had hoped for my PCB version.

[multigamesystem]

I designed and prototyped these from scratch myself. I do sell them at a limited capacity since Im one person 3D printing out of my basement workshop.