The following text must be included in any distribution of derivatives of this board. All links must also be included.
Based on the Vewlix Coin Mech by TheTrain
Copyright © 2024 TheTrain
Changes from the original design:
- list any changes you make here
This is a replacement coin mech for use in Vewlix and Chewlix units. I designed this because I wanted a more simple coin mech that would take whatever type of token or coin I put in the unit.
There are two versions of the model presented here:
1 - Vewlix Coin Mech - Coin Box Version - This Version simply replaces the coin mech, coins put through will go into the bottom coin box
2 - Vewlix Coin Mech - Coin Return Version - This version will route the coin to the coin return slot, good if you want to reuse coins or not have them go into the bottom coin box
A full set of printing STLs as well as source STEP files are provided with this.
To assemble the Vewlix Coin Mech - Coin Box Version you will need:
- 1x Long wire microswitch
- 4-6x M3 14-16mm countersunk hex bolts
- 2x M4 25mm button-top hex bolt
- 2x M4 flange nut
- 2x M3 18mm countersunk hex bolt (or a 25mm bolt will do)
- OPTIONAL 1x M4 18mm button-top hex bolt (or a 25mm bolt will do)
- OPTIONAL 1x M4 flange nut
To assemble the Vewlix Coin Mech - Coin Return Version you will need:
- 1x Long wire microswitch
- 4-6x M3 14-16mm countersunk hex bolts
- 2x M4 18mm button-top hex bolt
- 2x M4 flange nut
- 2x M3 25mm countersunk hex bolt (or a 25mm bolt will do)
- 2x M3 flange nut
Print multiple outside walls as well as multiple top and bottom layers so that this prints at 100% infill. It is a very small part but prints quickly and will be strong.
I printed this originally on my Bambu X1C with matte black PLA.
Donations are not necessary but always welcome! All received donations will be used for further prototyping.
https://www.paypal.com/donate/?hosted_button_id=2JMTZVCGLDYC2
v1.0
- Initial open source design
- TheTrain for doing the original design