SiPM carrier and LM4040 connecttion #37
-
|
Hi, I have two SiPM carrier board v1.0. are the compatible with the detector board v3.x? Thanks in advance. BR Andreas |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
Hi Andreas,
Yup, they're 100% compatible electrically and functionally. Just watch out for the right pins since the v1 boards come with a 2x3 header and the newer boards only have a couple solder pads.
That's bad, but you don't need to get a new one. Firstly, you don't actually need the voltage reference and secondly, you can solder a cable from the VRef pin of the Pico down to the LM4040 leg and solder the other 2 legs like normal. If you only ripped of the positive pad, it's fine, you can use the board anyways.
Yes, of course. The pico is included and already soldered on the board. |
Beta Was this translation helpful? Give feedback.
Hi Andreas,
Yup, they're 100% compatible electrically and functionally. Just watch out for the right pins since the v1 boards come with a 2x3 header and the newer boards only have a couple solder pads.
That's bad, but you don't need to get a new one. Firstly, you don't actually need the voltage reference and secondly, you can solder a cable from the VRef pin of the Pico down to the LM4040 leg and solder the other 2…