From ecd13014b37a2bb6fda4996e5bea9a178f04a11d Mon Sep 17 00:00:00 2001 From: Ziga Mahne Date: Thu, 5 Sep 2024 11:56:14 +0200 Subject: [PATCH] Add initial pack contents --- .ci/README.md | 7 + .ci/vcpkg-configuration.json | 17 + .github/workflows/Test-Examples.yml | 81 + .github/workflows/pack.yml | 33 + .gitignore | 3 + CMSIS/Driver/vio_STM32H747I-EVAL.c | 233 + Documents/OVERVIEW.md | 11 + Documents/README.md | 34 + Examples/Blinky/Blinky.csolution.yml | 38 + Examples/Blinky/CM4/Blinky.c | 33 + Examples/Blinky/CM4/Blinky_cm4.cproject.yml | 26 + .../ac6_linker_script.sct.src | 115 + .../regions_STM32H747I-EVAL.h | 94 + Examples/Blinky/CM7/Blinky.c | 101 + Examples/Blinky/CM7/Blinky_cm7.cproject.yml | 39 + Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c | 67 + .../CM7/RTE/CMSIS/RTX_Config.c.base@5.2.0 | 67 + Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h | 663 + .../CM7/RTE/CMSIS/RTX_Config.h.base@5.6.0 | 663 + .../ac6_linker_script.sct.src | 115 + .../regions_STM32H747I-EVAL.h | 96 + Examples/Blinky/CM7/retarget_stdio.c | 139 + Examples/Blinky/README.md | 37 + .../STM32H747I-EVAL/Blinky_cm4.cgen.yml | 57 + .../STM32H747I-EVAL/Blinky_cm7.cgen.yml | 64 + .../STM32H747I-EVAL/MX_Device/CM4/MX_Device.h | 127 + .../STM32H747I-EVAL/MX_Device/CM7/MX_Device.h | 335 + .../STM32H747I-EVAL/STM32CubeMX/.mxproject | 42 + .../STM32CubeMX/CM4/Inc/main.h | 293 + .../STM32CubeMX/CM4/Inc/stm32h7xx_hal_conf.h | 515 + .../STM32CubeMX/CM4/Inc/stm32h7xx_it.h | 66 + .../STM32CubeMX/CM4/Src/main.c | 648 + .../STM32CubeMX/CM4/Src/stm32h7xx_hal_msp.c | 614 + .../STM32CubeMX/CM4/Src/stm32h7xx_it.c | 203 + .../STM32CubeMX/CM7/Inc/main.h | 320 + .../STM32CubeMX/CM7/Inc/stm32h7xx_hal_conf.h | 515 + .../STM32CubeMX/CM7/Inc/stm32h7xx_it.h | 65 + .../STM32CubeMX/CM7/Src/main.c | 1063 + .../STM32CubeMX/CM7/Src/stm32h7xx_hal_msp.c | 1412 + .../CM7/Src/stm32h7xx_hal_timebase_tim.c | 120 + .../STM32CubeMX/CM7/Src/stm32h7xx_it.c | 193 + .../system_stm32h7xx_dualcore_boot_cm4_cm7.c | 420 + .../Device/ST/STM32H7xx/Include/stm32h747xx.h | 30534 ++++++++++++++++ .../Device/ST/STM32H7xx/Include/stm32h7xx.h | 301 + .../ST/STM32H7xx/Include/system_stm32h7xx.h | 103 + .../CMSIS/Device/ST/STM32H7xx/LICENSE.txt | 6 + .../STM32CubeMX/Drivers/CMSIS/LICENSE.txt | 201 + .../Inc/Legacy/stm32_hal_legacy.h | 4353 +++ .../STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h | 1185 + .../Inc/stm32h7xx_hal_cortex.h | 461 + .../Inc/stm32h7xx_hal_def.h | 222 + .../Inc/stm32h7xx_hal_dfsdm.h | 871 + .../Inc/stm32h7xx_hal_dma.h | 1333 + .../Inc/stm32h7xx_hal_dma_ex.h | 310 + .../Inc/stm32h7xx_hal_dsi.h | 1377 + .../Inc/stm32h7xx_hal_eth.h | 1849 + .../Inc/stm32h7xx_hal_eth_ex.h | 366 + .../Inc/stm32h7xx_hal_exti.h | 537 + .../Inc/stm32h7xx_hal_flash.h | 861 + .../Inc/stm32h7xx_hal_flash_ex.h | 1071 + .../Inc/stm32h7xx_hal_gpio.h | 359 + .../Inc/stm32h7xx_hal_gpio_ex.h | 492 + .../Inc/stm32h7xx_hal_hsem.h | 211 + .../Inc/stm32h7xx_hal_i2c.h | 838 + .../Inc/stm32h7xx_hal_i2c_ex.h | 175 + .../Inc/stm32h7xx_hal_ltdc.h | 719 + .../Inc/stm32h7xx_hal_ltdc_ex.h | 83 + .../Inc/stm32h7xx_hal_mdma.h | 868 + .../Inc/stm32h7xx_hal_nor.h | 324 + .../Inc/stm32h7xx_hal_pcd.h | 444 + .../Inc/stm32h7xx_hal_pcd_ex.h | 88 + .../Inc/stm32h7xx_hal_pwr.h | 809 + .../Inc/stm32h7xx_hal_pwr_ex.h | 789 + .../Inc/stm32h7xx_hal_qspi.h | 744 + .../Inc/stm32h7xx_hal_rcc.h | 8266 +++++ .../Inc/stm32h7xx_hal_rcc_ex.h | 4482 +++ .../Inc/stm32h7xx_hal_sai.h | 985 + .../Inc/stm32h7xx_hal_sai_ex.h | 104 + .../Inc/stm32h7xx_hal_sd.h | 800 + .../Inc/stm32h7xx_hal_sd_ex.h | 110 + .../Inc/stm32h7xx_hal_sdram.h | 236 + .../Inc/stm32h7xx_hal_sram.h | 230 + .../Inc/stm32h7xx_hal_tim.h | 2466 ++ .../Inc/stm32h7xx_hal_tim_ex.h | 533 + .../Inc/stm32h7xx_hal_uart.h | 1749 + .../Inc/stm32h7xx_hal_uart_ex.h | 870 + .../Inc/stm32h7xx_ll_bus.h | 6914 ++++ .../Inc/stm32h7xx_ll_cortex.h | 669 + .../Inc/stm32h7xx_ll_crs.h | 780 + .../Inc/stm32h7xx_ll_delayblock.h | 93 + .../Inc/stm32h7xx_ll_dma.h | 3322 ++ .../Inc/stm32h7xx_ll_dmamux.h | 2436 ++ .../Inc/stm32h7xx_ll_exti.h | 3285 ++ .../Inc/stm32h7xx_ll_fmc.h | 1162 + .../Inc/stm32h7xx_ll_gpio.h | 984 + .../Inc/stm32h7xx_ll_hsem.h | 902 + .../Inc/stm32h7xx_ll_i2c.h | 2279 ++ .../Inc/stm32h7xx_ll_lpuart.h | 2643 ++ .../Inc/stm32h7xx_ll_pwr.h | 2301 ++ .../Inc/stm32h7xx_ll_rcc.h | 6404 ++++ .../Inc/stm32h7xx_ll_sdmmc.h | 1117 + .../Inc/stm32h7xx_ll_system.h | 2442 ++ .../Inc/stm32h7xx_ll_usart.h | 4400 +++ .../Inc/stm32h7xx_ll_usb.h | 578 + .../Inc/stm32h7xx_ll_utils.h | 401 + .../Drivers/STM32H7xx_HAL_Driver/LICENSE.txt | 6 + .../STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c | 1312 + .../Src/stm32h7xx_hal_cortex.c | 558 + .../Src/stm32h7xx_hal_dfsdm.c | 3797 ++ .../Src/stm32h7xx_hal_dma.c | 2062 ++ .../Src/stm32h7xx_hal_dma_ex.c | 712 + .../Src/stm32h7xx_hal_dsi.c | 3172 ++ .../Src/stm32h7xx_hal_eth.c | 3379 ++ .../Src/stm32h7xx_hal_eth_ex.c | 660 + .../Src/stm32h7xx_hal_exti.c | 865 + .../Src/stm32h7xx_hal_flash.c | 1270 + .../Src/stm32h7xx_hal_flash_ex.c | 2115 ++ .../Src/stm32h7xx_hal_gpio.c | 555 + .../Src/stm32h7xx_hal_hsem.c | 447 + .../Src/stm32h7xx_hal_i2c.c | 7499 ++++ .../Src/stm32h7xx_hal_i2c_ex.c | 372 + .../Src/stm32h7xx_hal_ltdc.c | 2221 ++ .../Src/stm32h7xx_hal_ltdc_ex.c | 154 + .../Src/stm32h7xx_hal_mdma.c | 1899 + .../Src/stm32h7xx_hal_nor.c | 1642 + .../Src/stm32h7xx_hal_pcd.c | 2347 ++ .../Src/stm32h7xx_hal_pcd_ex.c | 341 + .../Src/stm32h7xx_hal_pwr.c | 876 + .../Src/stm32h7xx_hal_pwr_ex.c | 2154 ++ .../Src/stm32h7xx_hal_qspi.c | 2666 ++ .../Src/stm32h7xx_hal_rcc.c | 1814 + .../Src/stm32h7xx_hal_rcc_ex.c | 3935 ++ .../Src/stm32h7xx_hal_sai.c | 2946 ++ .../Src/stm32h7xx_hal_sai_ex.c | 134 + .../Src/stm32h7xx_hal_sd.c | 4158 +++ .../Src/stm32h7xx_hal_sd_ex.c | 313 + .../Src/stm32h7xx_hal_sdram.c | 1311 + .../Src/stm32h7xx_hal_sram.c | 1115 + .../Src/stm32h7xx_hal_tim.c | 7925 ++++ .../Src/stm32h7xx_hal_tim_ex.c | 2921 ++ .../Src/stm32h7xx_hal_uart.c | 4719 +++ .../Src/stm32h7xx_hal_uart_ex.c | 1042 + .../Src/stm32h7xx_ll_delayblock.c | 214 + .../Src/stm32h7xx_ll_fmc.c | 1092 + .../Src/stm32h7xx_ll_sdmmc.c | 1644 + .../Src/stm32h7xx_ll_usb.c | 2257 ++ .../MDK-ARM/startup_stm32h747xx_CM4.s | 621 + .../MDK-ARM/startup_stm32h747xx_CM7.s | 621 + .../MDK-ARM/stm32h747xx_flash_CM4.sct | 14 + .../MDK-ARM/stm32h747xx_flash_CM7.sct | 14 + .../MDK-ARM/stm32h747xx_sram1_CM7.sct | 14 + .../MDK-ARM/stm32h747xx_sram2_CM4.sct | 14 + .../STM32CubeMX/STM32CubeMX.ioc | 1328 + .../STM32H747I-EVAL/project.script | 4 + Examples/Blinky/cdefault.yml | 56 + Images/stm32h747i-eval_large.png | Bin 0 -> 162506 bytes Images/stm32h747i-eval_small.png | Bin 0 -> 201683 bytes Keil.STM32H747I-EVAL_BSP.pdsc | 129 + README.md | 52 +- gen_pack.sh | 118 + 160 files changed, 210216 insertions(+), 1 deletion(-) create mode 100644 .ci/README.md create mode 100644 .ci/vcpkg-configuration.json create mode 100644 .github/workflows/Test-Examples.yml create mode 100644 .github/workflows/pack.yml create mode 100644 .gitignore create mode 100644 CMSIS/Driver/vio_STM32H747I-EVAL.c create mode 100644 Documents/OVERVIEW.md create mode 100644 Documents/README.md create mode 100644 Examples/Blinky/Blinky.csolution.yml create mode 100644 Examples/Blinky/CM4/Blinky.c create mode 100644 Examples/Blinky/CM4/Blinky_cm4.cproject.yml create mode 100644 Examples/Blinky/CM4/RTE/Device/STM32H747XIHx_CM4/ac6_linker_script.sct.src create mode 100644 Examples/Blinky/CM4/RTE/Device/STM32H747XIHx_CM4/regions_STM32H747I-EVAL.h create mode 100644 Examples/Blinky/CM7/Blinky.c create mode 100644 Examples/Blinky/CM7/Blinky_cm7.cproject.yml create mode 100644 Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c create mode 100644 Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c.base@5.2.0 create mode 100644 Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h create mode 100644 Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h.base@5.6.0 create mode 100644 Examples/Blinky/CM7/RTE/Device/STM32H747XIHx_CM7/ac6_linker_script.sct.src create mode 100644 Examples/Blinky/CM7/RTE/Device/STM32H747XIHx_CM7/regions_STM32H747I-EVAL.h create mode 100644 Examples/Blinky/CM7/retarget_stdio.c create mode 100644 Examples/Blinky/README.md create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/Blinky_cm4.cgen.yml create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/Blinky_cm7.cgen.yml create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/MX_Device/CM4/MX_Device.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/MX_Device/CM7/MX_Device.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/.mxproject create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/main.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/stm32h7xx_hal_conf.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/stm32h7xx_it.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/main.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/stm32h7xx_hal_msp.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/stm32h7xx_it.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/main.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/stm32h7xx_hal_conf.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/stm32h7xx_it.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/main.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_hal_msp.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_hal_timebase_tim.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_it.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Common/Src/system_stm32h7xx_dualcore_boot_cm4_cm7.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h747xx.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/Include/system_stm32h7xx.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/LICENSE.txt create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/CMSIS/LICENSE.txt create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dfsdm.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dsi.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_nor.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_qspi.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sai.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sai_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sd.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sd_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sdram.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sram.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_delayblock.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_fmc.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_i2c.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_lpuart.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_sdmmc.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usb.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/LICENSE.txt create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dfsdm.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dsi.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_qspi.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sdram.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sram.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_delayblock.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_fmc.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_sdmmc.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_usb.c create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM4.s create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM7.s create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_flash_CM4.sct create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_flash_CM7.sct create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_sram1_CM7.sct create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_sram2_CM4.sct create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/STM32CubeMX.ioc create mode 100644 Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/project.script create mode 100644 Examples/Blinky/cdefault.yml create mode 100644 Images/stm32h747i-eval_large.png create mode 100644 Images/stm32h747i-eval_small.png create mode 100644 Keil.STM32H747I-EVAL_BSP.pdsc create mode 100755 gen_pack.sh diff --git a/.ci/README.md b/.ci/README.md new file mode 100644 index 0000000..69fc3e9 --- /dev/null +++ b/.ci/README.md @@ -0,0 +1,7 @@ +# Continuous Integration (CI) Test for Board Support Pack (BSP) + +Content of `.ci` Directory | Description +:----------------------------|:----------------- +`vcpkg-configuration.json` | Tool setup the CI test + +The [GitHub Actions](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/README.md#github-actions) in the directory [`.github/workflows`](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/.github/workflows) are the scripts for the CI tests. These scripts contain detailed comments about each step that is executed. diff --git a/.ci/vcpkg-configuration.json b/.ci/vcpkg-configuration.json new file mode 100644 index 0000000..6166829 --- /dev/null +++ b/.ci/vcpkg-configuration.json @@ -0,0 +1,17 @@ +{ + "registries": [ + { + "name": "arm", + "kind": "artifact", + "location": "https://artifacts.tools.arm.com/vcpkg-registry" + } + ], + "requires": { + "arm:tools/open-cmsis-pack/cmsis-toolbox": "^2.6.0", + "arm:tools/arm/mdk-toolbox":" ^1.0.0", + "arm:tools/kitware/cmake": "^3.28.4", + "arm:tools/ninja-build/ninja": "^1.12.0", + "arm:compilers/arm/armclang": "^6.22.0", + "arm:compilers/arm/arm-none-eabi-gcc": "^13.3.1" + } +} \ No newline at end of file diff --git a/.github/workflows/Test-Examples.yml b/.github/workflows/Test-Examples.yml new file mode 100644 index 0000000..4164721 --- /dev/null +++ b/.github/workflows/Test-Examples.yml @@ -0,0 +1,81 @@ +name: Test-Examples # BSP Examples +on: + workflow_dispatch: + pull_request: + branches: [main] + push: + branches: [main] + schedule: + - cron: '00 20 * * 6' + +jobs: + Test-Examples: # Install tools, build + strategy: + fail-fast: false + + runs-on: ubuntu-latest + + steps: + - name: Checkout .ci folder + uses: actions/checkout@v4 + with: + sparse-checkout: | + .ci + + - name: Install tools + uses: ARM-software/cmsis-actions/vcpkg@v1 + with: + config: "./.ci/vcpkg-configuration.json" + + - name: Activate Arm tool license + uses: ARM-software/cmsis-actions/armlm@v1 + + - name: Checkout current repository + uses: actions/checkout@v4 + with: + path: ./BSP + + - name: Checkout STM32H7xx_DFP + uses: actions/checkout@v4 + with: + repository: Open-CMSIS-Pack/STM32H7xx_DFP + path: ./DFP + + - name: Checkout CMSIS-Driver_STM32 + uses: actions/checkout@v4 + with: + repository: Open-CMSIS-Pack/CMSIS-Driver_STM32 + path: ./Drivers + + - name: Initialize CMSIS pack root folder + run: | + cpackget init https://www.keil.com/pack/index.pidx + cpackget update-index + + - name: Add local CMSIS packs + run: | + cpackget add ./BSP/Keil.STM32H747I-EVAL_BSP.pdsc + cpackget add ./DFP/Keil.STM32H7xx_DFP.pdsc + cpackget add ./Drivers/ARM.CMSIS-Driver_STM32.pdsc + + - name: Copy Blinky example to CI/Examples/ folder + working-directory: ./ + run: | + mkdir -p ./CI/Examples/Blinky + cp -rf ./BSP/Examples/Blinky/* ./CI/Examples/Blinky/ + + - name: Build Blinky AC6 + if: always() + working-directory: ./CI/Examples/Blinky + run: | + cbuild ./Blinky.csolution.yml --packs --update-rte --packs --toolchain AC6 --rebuild + + - name: Upload Artifact of the Blinky AC6 build + if: always() + uses: actions/upload-artifact@v4 + with: + name: Blinky_AC6 + path: | + ./CI/Examples/Blinky/ + !./CI/Examples/Blinky/tmp/ + retention-days: 1 diff --git a/.github/workflows/pack.yml b/.github/workflows/pack.yml new file mode 100644 index 0000000..25371b2 --- /dev/null +++ b/.github/workflows/pack.yml @@ -0,0 +1,33 @@ +name: Build pack +on: + workflow_dispatch: + pull_request: + push: + branches: [main] + release: + types: [published] + +concurrency: + group: ${{ github.workflow }}-${{ github.ref }} + cancel-in-progress: true + +jobs: + pack: + name: Generate pack + runs-on: ubuntu-22.04 + steps: + - uses: actions/checkout@v4 + with: + fetch-depth: 0 + + - name: Fetch tags + if: github.event_name == 'release' + run: | + git fetch --tags --force + + - uses: Open-CMSIS-Pack/gen-pack-action@main + with: + doxygen-version: none + packchk-version: 1.4.1 + gen-pack-script: ./gen_pack.sh + gen-pack-output: ./output diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..2f380ca --- /dev/null +++ b/.gitignore @@ -0,0 +1,3 @@ +# Pack build files +/build/ +/output/ diff --git a/CMSIS/Driver/vio_STM32H747I-EVAL.c b/CMSIS/Driver/vio_STM32H747I-EVAL.c new file mode 100644 index 0000000..49491b9 --- /dev/null +++ b/CMSIS/Driver/vio_STM32H747I-EVAL.c @@ -0,0 +1,233 @@ +/****************************************************************************** + * @file vio_STM32H747I-EVAL.c + * @brief Virtual I/O implementation for board STM32H747I-EVAL + * @version V1.0.0 + * @date 5. September 2024 + ******************************************************************************/ +/* + * Copyright (c) 2024 Arm Limited (or its affiliates). + * All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*! \page vio_STM32H747I-EVAL Physical I/O Mapping + +The table below lists the physical I/O mapping of this CMSIS-Driver VIO implementation. + +| Virtual I/O | Variable | Board component | Pin +|:--------------|:---------------|:---------------------|:------ +| vioBUTTON0 | vioSignalIn.0 | Tamper button (B3) | PC13 +| vioLED0 | vioSignalOut.0 | LED red (LD3) | PA4 +| vioLED1 | vioSignalOut.1 | LED green (LD1) | PF10 +*/ + +#include "cmsis_vio.h" + +#include "RTE_Components.h" // Component selection +#include CMSIS_device_header + +#if !defined CMSIS_VOUT || !defined CMSIS_VIN +#include "GPIO_STM32.h" +#endif + +// VIO input, output definitions +#ifndef VIO_VALUE_NUM +#define VIO_VALUE_NUM 5U // Number of values +#endif + +// VIO input, output variables +static uint32_t vioSignalIn __USED; // Memory for incoming signal +static uint32_t vioSignalOut __USED; // Memory for outgoing signal +static int32_t vioValue[VIO_VALUE_NUM] __USED; // Memory for value used in vioGetValue/vioSetValue + +#if !defined CMSIS_VOUT || !defined CMSIS_VIN + +// VIO Active State +#define VIO_ACTIVE_LOW 0U +#define VIO_ACTIVE_HIGH 1U + +typedef struct { + uint32_t vioSignal; + uint16_t pin; + uint8_t pullResistor; + uint8_t activeState; +} pinCfg_t; + +#if !defined CMSIS_VOUT +// VOUT Configuration +static const pinCfg_t outputCfg[] = { +// signal, pin, pull resistor, active state + { vioLED0, GPIO_PIN_ID_PORTA(4), ARM_GPIO_PULL_NONE, VIO_ACTIVE_LOW }, + { vioLED1, GPIO_PIN_ID_PORTF(10), ARM_GPIO_PULL_NONE, VIO_ACTIVE_LOW } +}; +#endif + +#if !defined CMSIS_VIN +// VIN Configuration +static const pinCfg_t inputCfg[] = { +// signal, pin, pull resistor, active state + { vioBUTTON0, GPIO_PIN_ID_PORTC(13), ARM_GPIO_PULL_NONE, VIO_ACTIVE_LOW } +}; +#endif + +// External GPIO Driver +extern ARM_DRIVER_GPIO Driver_GPIO0; +static ARM_DRIVER_GPIO *pGPIODrv = &Driver_GPIO0; +#endif + +// Initialize test input, output. +void vioInit (void) { + uint32_t n; +#if !defined(CMSIS_VOUT) || !defined(CMSIS_VIN) + ARM_GPIO_Pin_t pin; +#endif + + vioSignalIn = 0U; + vioSignalOut = 0U; + + for (n = 0U; n < VIO_VALUE_NUM; n++) { + vioValue[n] = 0U; + } + +#if !defined CMSIS_VOUT + for (n = 0U; n < (sizeof(outputCfg) / sizeof(pinCfg_t)); n++) { + pin = (ARM_GPIO_Pin_t)outputCfg[n].pin; + pGPIODrv->Setup(pin, NULL); + pGPIODrv->SetOutputMode(pin, ARM_GPIO_PUSH_PULL); + pGPIODrv->SetPullResistor(pin, outputCfg[n].pullResistor); + pGPIODrv->SetDirection(pin, ARM_GPIO_OUTPUT); + + // Set initial pin state to inactive + if (outputCfg[n].activeState == VIO_ACTIVE_HIGH) { + pGPIODrv->SetOutput(pin, 0U); + } else { + pGPIODrv->SetOutput(pin, 1U); + } + } +#endif + +#if !defined CMSIS_VIN + for (n = 0U; n < (sizeof(inputCfg) / sizeof(pinCfg_t)); n++) { + pin = (ARM_GPIO_Pin_t)inputCfg[n].pin; + pGPIODrv->Setup(pin, NULL); + pGPIODrv->SetPullResistor(pin, inputCfg[n].pullResistor); + pGPIODrv->SetDirection(pin, ARM_GPIO_INPUT); + } +#endif +} + +// Set signal output. +void vioSetSignal (uint32_t mask, uint32_t signal) { +#if !defined CMSIS_VOUT + ARM_GPIO_Pin_t pin; + uint32_t pinValue, n; +#endif + + vioSignalOut &= ~mask; + vioSignalOut |= mask & signal; + +#if !defined CMSIS_VOUT + // Output signals to LEDs + for (n = 0U; n < (sizeof(outputCfg) / sizeof(pinCfg_t)); n++) { + pin = (ARM_GPIO_Pin_t)outputCfg[n].pin; + if ((mask & outputCfg[n].vioSignal) != 0U) { + if ((signal & outputCfg[n].vioSignal) != 0U) { + pinValue = 1U; + } else { + pinValue = 0U; + } + if (pinValue == outputCfg[n].activeState) { + pGPIODrv->SetOutput(pin, 1U); + } else { + pGPIODrv->SetOutput(pin, 0U); + } + } + } +#endif +} + +// Get signal input. +uint32_t vioGetSignal (uint32_t mask) { + uint32_t signal; +#if !defined CMSIS_VIN + ARM_GPIO_Pin_t pin; + uint32_t pinValue, n; +#endif + +#if !defined CMSIS_VIN + // Get input signals from buttons + for (n = 0U; n < (sizeof(inputCfg) / sizeof(pinCfg_t)); n++) { + pin = (ARM_GPIO_Pin_t)inputCfg[n].pin; + if ((mask & inputCfg[n].vioSignal) != 0U) { + pinValue = pGPIODrv->GetInput(pin); + if (pinValue == inputCfg[n].activeState) { + vioSignalIn |= inputCfg[n].vioSignal; + } else { + vioSignalIn &= ~inputCfg[n].vioSignal; + } + } + } +#endif + + signal = vioSignalIn & mask; + + return signal; +} + +// Set value output. +// Note: vioAOUT not supported. +void vioSetValue (uint32_t id, int32_t value) { + uint32_t index = id; +#if !defined CMSIS_VOUT +// Add user variables here: + +#endif + + if (index >= VIO_VALUE_NUM) { + return; /* return in case of out-of-range index */ + } + + vioValue[index] = value; + +#if !defined CMSIS_VOUT +// Add user code here: + +#endif +} + +// Get value input. +// Note: vioAIN not supported. +int32_t vioGetValue (uint32_t id) { + uint32_t index = id; + int32_t value; +#if !defined CMSIS_VIN +// Add user variables here: + +#endif + + if (index >= VIO_VALUE_NUM) { + return 0U; /* return 0 in case of out-of-range index */ + } + +#if !defined CMSIS_VIN +// Add user code here: + +#endif + + value = vioValue[index]; + + return value; +} diff --git a/Documents/OVERVIEW.md b/Documents/OVERVIEW.md new file mode 100644 index 0000000..ea5a735 --- /dev/null +++ b/Documents/OVERVIEW.md @@ -0,0 +1,11 @@ +# STM32H747I-EVAL_BSP + +The **STMicroelectronics STM32H747I-EVAL Board Support Pack (BSP)**: + +- Contains examples in *csolution format* for usage with the [CMSIS-Toolbox](https://github.com/Open-CMSIS-Pack/cmsis-toolbox/blob/main/docs/README.md) and the [VS Code CMSIS Solution](https://marketplace.visualstudio.com/items?itemName=Arm.cmsis-csolution) extension. +- Requires the [Device Family Pack (DFP) for the STM32H7 series](https://www.keil.arm.com/packs/stm32h7xx_dfp-keil). +- Is configured with [STM32CubeMX](https://www.st.com/en/development-tools/stm32cubemx.html) for the Arm Compiler 6 (MDK). + +## Content in *csolution format* + +- [Examples/Blinky](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/Examples/Blinky) shows the basic usage of this board. diff --git a/Documents/README.md b/Documents/README.md new file mode 100644 index 0000000..8af651d --- /dev/null +++ b/Documents/README.md @@ -0,0 +1,34 @@ +# STM32H747I-EVAL Evaluation board + +## Overview + +The STM32H747I-EVAL Evaluation kit is a complete demonstration and development platform for Arm® Cortex®-M7 and Arm® Cortex®-M4 core-based STM32H747XI microcontroller, with 2 Mbyte of flash memory and 1 Mbyte of SRAM. + +The STM32H747I-EVAL Evaluation kit is used as a reference design for user application development before porting to the final product, thus simplifying the application development. + +The full range of hardware features available on the board helps users to enhance their application development by an evaluation of all the peripherals (such as USB OTG HS and USB OTG FS, Ethernet, USART, CAN FD, audio DAC and ADC, digital microphone, SRAM, SDRAM, NOR flash memory, twin Quad-SPI flash memory, microSD™ 3.0 card, RGB interface LCD with capacitive touch panel, and others). The expansion connectors provide an easy way to add specialized features, while ETM trace is supported through external probes. + +STLINK-V3E is integrated into the board, as the embedded in-circuit debugger and programmer for the STM32 MCU and USB Virtual COM port bridge. + +## Getting started + +- [User manual](https://www.st.com/resource/en/user_manual/um2525-evaluation-boards-with-stm32h747xi-and-stm32h757xi-mcus-stmicroelectronics.pdf) + +### ST-LINK driver installation and firmware upgrade (on Microsoft Windows) + +1. Download the latest [ST-LINK driver](https://www.st.com/en/development-tools/stsw-link009.html). +2. Extract the archive and run `dpinst_amd64.exe`. Follow the displayed instructions. +3. Download the latest [ST-LINK firmware upgrade](https://www.st.com/en/development-tools/stsw-link007.html). +4. Extract the archive and run the `ST-LinkUpgrade.exe` program. +5. Connect the board to your PC using a USB cable and wait until the USB enumeration is completed. +6. In the **ST-Link Upgrade** program, press the **Device Connect** button. +7. When the ST-LINK driver is correctly installed, the current ST-LINK version is displayed. +8. Press the **Yes >>>>** button to start the firmware upgrade process. + +## Technical reference + +- [STM32H747XI microcontroller](https://www.st.com/en/microcontrollers-microprocessors/stm32h747xi.html) +- [STM32H747I-EVAL board](https://www.st.com/en/evaluation-tools/stm32h747i-eval.html) +- [User manual](https://www.st.com/resource/en/user_manual/um2525-evaluation-boards-with-stm32h747xi-and-stm32h757xi-mcus-stmicroelectronics.pdf) +- [Data brief](https://www.st.com/resource/en/data_brief/stm32h747i-eval.pdf) +- [Schematic](https://www.st.com/resource/en/schematic_pack/mb1246-b0x_schematic.pdf) diff --git a/Examples/Blinky/Blinky.csolution.yml b/Examples/Blinky/Blinky.csolution.yml new file mode 100644 index 0000000..f951deb --- /dev/null +++ b/Examples/Blinky/Blinky.csolution.yml @@ -0,0 +1,38 @@ +# A solution is a collection of related projects that share same base configuration. +solution: + created-for: CMSIS-Toolbox@2.6.0 + cdefault: + + # List of tested compilers that can be selected + select-compiler: + - compiler: AC6 + + # List the packs that define the device and/or board. + packs: + - pack: Keil::STM32H7xx_DFP@>=4.0.0-0 + - pack: Keil::STM32H747I-EVAL_BSP@>=1.0.0-0 + - pack: ARM::CMSIS-Driver_STM32@>=1.0.0-0 + - pack: ARM::CMSIS@>=6.0.0 + - pack: ARM::CMSIS-RTX@>=5.9.0 + - pack: ARM::CMSIS-Compiler@>=2.0.0 + + # List different hardware targets that are used to deploy the solution. + target-types: + - type: STM32H747I-EVAL + board: STMicroelectronics::STM32H747I-EVAL + device: STMicroelectronics::STM32H747XIHx + + # List of different build configurations. + build-types: + - type: Debug + debug: on + optimize: debug + + - type: Release + debug: off + optimize: balanced + + # List related projects. + projects: + - project: CM4/Blinky_cm4.cproject.yml + - project: CM7/Blinky_cm7.cproject.yml diff --git a/Examples/Blinky/CM4/Blinky.c b/Examples/Blinky/CM4/Blinky.c new file mode 100644 index 0000000..d70fd31 --- /dev/null +++ b/Examples/Blinky/CM4/Blinky.c @@ -0,0 +1,33 @@ +/*--------------------------------------------------------------------------- + * Copyright (c) 2024 Arm Limited (or its affiliates). + * All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + *---------------------------------------------------------------------------*/ + +#include "main.h" +#include "cmsis_vio.h" + +/*----------------------------------------------------------------------------- + * Application main + *----------------------------------------------------------------------------*/ +int app_main (void) { + for (;;) { + vioSetSignal(vioLED1, vioLEDon); // Switch LED1 on + HAL_Delay(1000U); // Delay 1000 ms + vioSetSignal(vioLED1, vioLEDoff); // Switch LED1 off + HAL_Delay(1000U); // Delay 1000 ms + } +} diff --git a/Examples/Blinky/CM4/Blinky_cm4.cproject.yml b/Examples/Blinky/CM4/Blinky_cm4.cproject.yml new file mode 100644 index 0000000..70d7d87 --- /dev/null +++ b/Examples/Blinky/CM4/Blinky_cm4.cproject.yml @@ -0,0 +1,26 @@ +# A project translates into one executable or library. +project: + + device: :CM4 + + # List components to use for your application. + # A software component is a re-usable unit that may be configurable. + components: + - component: Device:CubeMX + + - component: CMSIS:CORE + - component: CMSIS Driver:GPIO + - component: CMSIS Driver:VIO:Board + + # List of source groups and files added to a project or a layer. + groups: + - group: Documentation + files: + - file: ../README.md + - group: Source Files + files: + - file: Blinky.c + linker: + - script: ./RTE/Device/STM32H747XIHx_CM4/ac6_linker_script.sct.src + regions: ./RTE/Device/STM32H747XIHx_CM4/regions_STM32H747I-EVAL.h + for-compiler: AC6 diff --git a/Examples/Blinky/CM4/RTE/Device/STM32H747XIHx_CM4/ac6_linker_script.sct.src b/Examples/Blinky/CM4/RTE/Device/STM32H747XIHx_CM4/ac6_linker_script.sct.src new file mode 100644 index 0000000..e0318c9 --- /dev/null +++ b/Examples/Blinky/CM4/RTE/Device/STM32H747XIHx_CM4/ac6_linker_script.sct.src @@ -0,0 +1,115 @@ +/* + * Copyright (c) 2023 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/* Stack and Heap are configured in startup file */ +#define __STACK_SIZE 0 +#define __HEAP_SIZE 0 + +/* ---------------------------------------------------------------------------- + Stack seal size definition + *----------------------------------------------------------------------------*/ +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define __STACKSEAL_SIZE 8 +#else +#define __STACKSEAL_SIZE 0 +#endif + +/*---------------------------------------------------------------------------- + Scatter File Definitions definition + *----------------------------------------------------------------------------*/ + +LR_ROM0 __ROM0_BASE __ROM0_SIZE { + + ER_ROM0 __ROM0_BASE __ROM0_SIZE { + *.o (RESET, +First) + *(InRoot$$Sections) + *(+RO +XO) + } + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + ER_CMSE_VENEER AlignExpr(+0, 32) (__ROM0_SIZE - AlignExpr(ImageLength(ER_ROM0), 32)) { + *(Veneer$$CMSE) + } +#endif + + RW_NOINIT __RAM0_BASE UNINIT (__RAM0_SIZE - __HEAP_SIZE - __STACK_SIZE - __STACKSEAL_SIZE) { + *.o(.bss.noinit) + *.o(.bss.noinit.*) + } + + RW_RAM0 AlignExpr(+0, 8) (__RAM0_SIZE - __HEAP_SIZE - __STACK_SIZE - __STACKSEAL_SIZE - AlignExpr(ImageLength(RW_NOINIT), 8)) { + *(+RW +ZI) + } + +#if __HEAP_SIZE > 0 + ARM_LIB_HEAP (AlignExpr(+0, 8)) EMPTY __HEAP_SIZE { ; Reserve empty region for heap + } +#endif + +#if __STACK_SIZE > 0 + ARM_LIB_STACK (__RAM0_BASE + __RAM0_SIZE - __STACKSEAL_SIZE) EMPTY -__STACK_SIZE { ; Reserve empty region for stack + } +#endif + +#if __STACKSEAL_SIZE > 0 + STACKSEAL +0 EMPTY __STACKSEAL_SIZE { ; Reserve empty region for stack seal immediately after stack + } +#endif + +#if __RAM1_SIZE > 0 + RW_RAM1 __RAM1_BASE __RAM1_SIZE { + .ANY (+RW +ZI) + } +#endif + +#if __RAM2_SIZE > 0 + RW_RAM2 __RAM2_BASE __RAM2_SIZE { + .ANY (+RW +ZI) + } +#endif + +#if __RAM3_SIZE > 0 + RW_RAM3 __RAM3_BASE __RAM3_SIZE { + .ANY (+RW +ZI) + } +#endif +} + +#if __ROM1_SIZE > 0 +LR_ROM1 __ROM1_BASE __ROM1_SIZE { + ER_ROM1 +0 __ROM1_SIZE { + .ANY (+RO +XO) + } +} +#endif + +#if __ROM2_SIZE > 0 +LR_ROM2 __ROM2_BASE __ROM2_SIZE { + ER_ROM2 +0 __ROM2_SIZE { + .ANY (+RO +XO) + } +} +#endif + +#if __ROM3_SIZE > 0 +LR_ROM3 __ROM3_BASE __ROM3_SIZE { + ER_ROM3 +0 __ROM3_SIZE { + .ANY (+RO +XO) + } +} +#endif diff --git a/Examples/Blinky/CM4/RTE/Device/STM32H747XIHx_CM4/regions_STM32H747I-EVAL.h b/Examples/Blinky/CM4/RTE/Device/STM32H747XIHx_CM4/regions_STM32H747I-EVAL.h new file mode 100644 index 0000000..08ad5ed --- /dev/null +++ b/Examples/Blinky/CM4/RTE/Device/STM32H747XIHx_CM4/regions_STM32H747I-EVAL.h @@ -0,0 +1,94 @@ +#ifndef REGIONS_STM32H747I_EVAL_H +#define REGIONS_STM32H747I_EVAL_H + + +//-------- <<< Use Configuration Wizard in Context Menu >>> -------------------- +//------ With VS Code: Open Preview for Configuration Wizard ------------------- + +// Auto-generated using information from packs +// Device Family Pack (DFP): Keil::STM32H7xx_DFP@4.0.0 +// Board Support Pack (BSP): Keil::STM32H747I-EVAL_BSP@1.0.0 + +// ROM Configuration +// ======================= +// __ROM0 (is rx memory: FLASH_Bank2 from DFP) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. Default: 0x08100000 +// Contains Startup and Vector Table +#define __ROM0_BASE 0x08100000 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. Default: 0x00100000 +#define __ROM0_SIZE 0x00100000 +// + +// __ROM1 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __ROM1_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __ROM1_SIZE 0 +// + +// __ROM2 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __ROM2_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __ROM2_SIZE 0 +// + +// __ROM3 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __ROM3_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __ROM3_SIZE 0 +// + +// + +// RAM Configuration +// ======================= +// __RAM0 (is rw memory: RAM_D2 from DFP) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. Default: 0x10000000 +// Contains uninitialized RAM, Stack, and Heap +#define __RAM0_BASE 0x10000000 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. Default: 0x00048000 +#define __RAM0_SIZE 0x00048000 +// + +// __RAM1 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __RAM1_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __RAM1_SIZE 0 +// + +// __RAM2 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __RAM2_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __RAM2_SIZE 0 +// + +// __RAM3 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __RAM3_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __RAM3_SIZE 0 +// + +// + +#endif /* REGIONS_STM32H747I_EVAL_H */ diff --git a/Examples/Blinky/CM7/Blinky.c b/Examples/Blinky/CM7/Blinky.c new file mode 100644 index 0000000..d545a97 --- /dev/null +++ b/Examples/Blinky/CM7/Blinky.c @@ -0,0 +1,101 @@ +/*--------------------------------------------------------------------------- + * Copyright (c) 2024 Arm Limited (or its affiliates). + * All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + *---------------------------------------------------------------------------*/ + +#include + +#include "main.h" + +#include "cmsis_os2.h" // ::CMSIS:RTOS2 +#include "cmsis_vio.h" + +static osThreadId_t tid_thrLED; // Thread id of thread: LED +static osThreadId_t tid_thrButton; // Thread id of thread: Button + +/*----------------------------------------------------------------------------- + thrLED: blink LED + *----------------------------------------------------------------------------*/ +static __NO_RETURN void thrLED (void *argument) { + uint32_t active_flag = 0U; + + (void)argument; + + for (;;) { + if (osThreadFlagsWait(1U, osFlagsWaitAny, 0U) == 1U) { + active_flag ^= 1U; + } + + if (active_flag == 1U) { + vioSetSignal(vioLED0, vioLEDoff); // Switch LED0 off + osDelay(100U); // Delay 100 ms + vioSetSignal(vioLED0, vioLEDon); // Switch LED0 on + osDelay(100U); // Delay 100 ms + } + else { + vioSetSignal(vioLED0, vioLEDon); // Switch LED0 on + osDelay(500U); // Delay 500 ms + vioSetSignal(vioLED0, vioLEDoff); // Switch LED0 off + osDelay(500U); // Delay 500 ms + } + } +} + +/*----------------------------------------------------------------------------- + thrButton: check Button state + *----------------------------------------------------------------------------*/ +static __NO_RETURN void thrButton (void *argument) { + uint32_t last = 0U; + uint32_t state; + + (void)argument; + + for (;;) { + state = (vioGetSignal(vioBUTTON0)); // Get pressed Button state + if (state != last) { + if (state == 1U) { + osThreadFlagsSet(tid_thrLED, 1U); // Set flag to thrLED + } + last = state; + } + osDelay(100U); + } +} + +/*----------------------------------------------------------------------------- + * Application main thread + *----------------------------------------------------------------------------*/ +__NO_RETURN void app_main_thread (void *argument) { + + printf("DualCore Blinky example\n"); + + tid_thrLED = osThreadNew(thrLED, NULL, NULL); // Create LED thread + tid_thrButton = osThreadNew(thrButton, NULL, NULL); // Create Button thread + + for (;;) { // Loop forever + } +} + +/*----------------------------------------------------------------------------- + * Application initialization + *----------------------------------------------------------------------------*/ +int app_main (void) { + osKernelInitialize(); /* Initialize CMSIS-RTOS2 */ + osThreadNew(app_main_thread, NULL, NULL); + osKernelStart(); /* Start thread execution */ + return 0; +} diff --git a/Examples/Blinky/CM7/Blinky_cm7.cproject.yml b/Examples/Blinky/CM7/Blinky_cm7.cproject.yml new file mode 100644 index 0000000..50b812f --- /dev/null +++ b/Examples/Blinky/CM7/Blinky_cm7.cproject.yml @@ -0,0 +1,39 @@ +# A project translates into one executable or library. +project: + + device: :CM7 + + # List components to use for your application. + # A software component is a re-usable unit that may be configurable. + components: + - component: Device:CubeMX + + - component: CMSIS:CORE + + - component: CMSIS:OS Tick:SysTick + - component: CMSIS:RTOS2:Keil RTX5&Source + + - component: CMSIS-Compiler:CORE + - component: CMSIS-Compiler:STDIN:Custom + - component: CMSIS-Compiler:STDOUT:Custom + - component: CMSIS-Compiler:STDERR:Custom + + - component: CMSIS Driver:GPIO + - component: CMSIS Driver:USART + - component: CMSIS Driver:VIO:Board + + # List of source groups and files added to a project or a layer. + groups: + - group: Documentation + files: + - file: ../README.md + - group: Source Files + files: + - file: Blinky.c + - file: retarget_stdio.c + define: + - RETARGET_STDIO_UART: 1 + linker: + - script: ./RTE/Device/STM32H747XIHx_CM7/ac6_linker_script.sct.src + regions: ./RTE/Device/STM32H747XIHx_CM7/regions_STM32H747I-EVAL.h + for-compiler: AC6 diff --git a/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c b/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c new file mode 100644 index 0000000..d21fa0a --- /dev/null +++ b/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c @@ -0,0 +1,67 @@ +/* + * Copyright (c) 2013-2023 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * ----------------------------------------------------------------------------- + * + * $Revision: V5.2.0 + * + * Project: CMSIS-RTOS RTX + * Title: RTX Configuration + * + * ----------------------------------------------------------------------------- + */ + +#include "cmsis_compiler.h" +#include "rtx_os.h" + +// OS Idle Thread +__WEAK __NO_RETURN void osRtxIdleThread (void *argument) { + (void)argument; + + for (;;) {} +} + +// OS Error Callback function +__WEAK uint32_t osRtxErrorNotify (uint32_t code, void *object_id) { + (void)object_id; + + switch (code) { + case osRtxErrorStackOverflow: + // Stack overflow detected for thread (thread_id=object_id) + break; + case osRtxErrorISRQueueOverflow: + // ISR Queue overflow detected when inserting object (object_id) + break; + case osRtxErrorTimerQueueOverflow: + // User Timer Callback Queue overflow detected for timer (timer_id=object_id) + break; + case osRtxErrorClibSpace: + // Standard C/C++ library libspace not available: increase OS_THREAD_LIBSPACE_NUM + break; + case osRtxErrorClibMutex: + // Standard C/C++ library mutex initialization failed + break; + case osRtxErrorSVC: + // Invalid SVC function called (function=object_id) + break; + default: + // Reserved + break; + } + for (;;) {} +//return 0U; +} diff --git a/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c.base@5.2.0 b/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c.base@5.2.0 new file mode 100644 index 0000000..d21fa0a --- /dev/null +++ b/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.c.base@5.2.0 @@ -0,0 +1,67 @@ +/* + * Copyright (c) 2013-2023 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * ----------------------------------------------------------------------------- + * + * $Revision: V5.2.0 + * + * Project: CMSIS-RTOS RTX + * Title: RTX Configuration + * + * ----------------------------------------------------------------------------- + */ + +#include "cmsis_compiler.h" +#include "rtx_os.h" + +// OS Idle Thread +__WEAK __NO_RETURN void osRtxIdleThread (void *argument) { + (void)argument; + + for (;;) {} +} + +// OS Error Callback function +__WEAK uint32_t osRtxErrorNotify (uint32_t code, void *object_id) { + (void)object_id; + + switch (code) { + case osRtxErrorStackOverflow: + // Stack overflow detected for thread (thread_id=object_id) + break; + case osRtxErrorISRQueueOverflow: + // ISR Queue overflow detected when inserting object (object_id) + break; + case osRtxErrorTimerQueueOverflow: + // User Timer Callback Queue overflow detected for timer (timer_id=object_id) + break; + case osRtxErrorClibSpace: + // Standard C/C++ library libspace not available: increase OS_THREAD_LIBSPACE_NUM + break; + case osRtxErrorClibMutex: + // Standard C/C++ library mutex initialization failed + break; + case osRtxErrorSVC: + // Invalid SVC function called (function=object_id) + break; + default: + // Reserved + break; + } + for (;;) {} +//return 0U; +} diff --git a/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h b/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h new file mode 100644 index 0000000..46cf4bb --- /dev/null +++ b/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h @@ -0,0 +1,663 @@ +/* + * Copyright (c) 2013-2023 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * ----------------------------------------------------------------------------- + * + * $Revision: V5.6.0 + * + * Project: CMSIS-RTOS RTX + * Title: RTX Configuration definitions + * + * ----------------------------------------------------------------------------- + */ + +#ifndef RTX_CONFIG_H_ +#define RTX_CONFIG_H_ + +#ifdef _RTE_ +#include "RTE_Components.h" +#ifdef RTE_RTX_CONFIG_H +#include RTE_RTX_CONFIG_H +#endif +#endif + +//-------- <<< Use Configuration Wizard in Context Menu >>> -------------------- + +// System Configuration +// ======================= + +// Global Dynamic Memory size [bytes] <0-1073741824:8> +// Defines the combined global dynamic memory size. +// Default: 32768 +#ifndef OS_DYNAMIC_MEM_SIZE +#define OS_DYNAMIC_MEM_SIZE 32768 +#endif + +// Kernel Tick Frequency [Hz] <1-1000000> +// Defines base time unit for delays and timeouts. +// Default: 1000 (1ms tick) +#ifndef OS_TICK_FREQ +#define OS_TICK_FREQ 1000 +#endif + +// Round-Robin Thread switching +// Enables Round-Robin Thread switching. +#ifndef OS_ROBIN_ENABLE +#define OS_ROBIN_ENABLE 1 +#endif + +// Round-Robin Timeout <1-1000> +// Defines how many ticks a thread will execute before a thread switch. +// Default: 5 +#ifndef OS_ROBIN_TIMEOUT +#define OS_ROBIN_TIMEOUT 5 +#endif + +// + +// Safety features (Source variant only) +// Enables FuSa related features. +// Requires RTX Source variant. +// Enables: +// - selected features from this group +// - Thread functions: osThreadProtectPrivileged +#ifndef OS_SAFETY_FEATURES +#define OS_SAFETY_FEATURES 0 +#endif + +// Safety Class +// Threads assigned to lower classes cannot modify higher class threads. +// Enables: +// - Object attributes: osSafetyClass +// - Kernel functions: osKernelProtect, osKernelDestroyClass +// - Thread functions: osThreadGetClass, osThreadSuspendClass, osThreadResumeClass +#ifndef OS_SAFETY_CLASS +#define OS_SAFETY_CLASS 1 +#endif + +// MPU Protected Zone +// Access protection via MPU (Spatial isolation). +// Enables: +// - Thread attributes: osThreadZone +// - Thread functions: osThreadGetZone, osThreadTerminateZone +// - Zone Management: osZoneSetup_Callback +#ifndef OS_EXECUTION_ZONE +#define OS_EXECUTION_ZONE 1 +#endif + +// Thread Watchdog +// Watchdog alerts ensure timing for critical threads (Temporal isolation). +// Enables: +// - Thread functions: osThreadFeedWatchdog +// - Handler functions: osWatchdogAlarm_Handler +#ifndef OS_THREAD_WATCHDOG +#define OS_THREAD_WATCHDOG 1 +#endif + +// Object Pointer checking +// Check object pointer alignment and memory region. +#ifndef OS_OBJ_PTR_CHECK +#define OS_OBJ_PTR_CHECK 0 +#endif + +// SVC Function Pointer checking +// Check SVC function pointer alignment and memory region. +// User needs to define a linker execution region RTX_SVC_VENEERS +// containing input sections: rtx_*.o (.text.os.svc.veneer.*) +#ifndef OS_SVC_PTR_CHECK +#define OS_SVC_PTR_CHECK 0 +#endif + +// + +// ISR FIFO Queue +// <4=> 4 entries <8=> 8 entries <12=> 12 entries <16=> 16 entries +// <24=> 24 entries <32=> 32 entries <48=> 48 entries <64=> 64 entries +// <96=> 96 entries <128=> 128 entries <196=> 196 entries <256=> 256 entries +// RTOS Functions called from ISR store requests to this buffer. +// Default: 16 entries +#ifndef OS_ISR_FIFO_QUEUE +#define OS_ISR_FIFO_QUEUE 16 +#endif + +// Object Memory usage counters +// Enables object memory usage counters (requires RTX source variant). +#ifndef OS_OBJ_MEM_USAGE +#define OS_OBJ_MEM_USAGE 0 +#endif + +// + +// Thread Configuration +// ======================= + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_THREAD_OBJ_MEM +#define OS_THREAD_OBJ_MEM 0 +#endif + +// Number of user Threads <1-1000> +// Defines maximum number of user threads that can be active at the same time. +// Applies to user threads with system provided memory for control blocks. +#ifndef OS_THREAD_NUM +#define OS_THREAD_NUM 1 +#endif + +// Number of user Threads with default Stack size <0-1000> +// Defines maximum number of user threads with default stack size. +// Applies to user threads with zero stack size specified. +#ifndef OS_THREAD_DEF_STACK_NUM +#define OS_THREAD_DEF_STACK_NUM 0 +#endif + +// Total Stack size [bytes] for user Threads with user-provided Stack size <0-1073741824:8> +// Defines the combined stack size for user threads with user-provided stack size. +// Applies to user threads with user-provided stack size and system provided memory for stack. +// Default: 0 +#ifndef OS_THREAD_USER_STACK_SIZE +#define OS_THREAD_USER_STACK_SIZE 0 +#endif + +// + +// Default Thread Stack size [bytes] <96-1073741824:8> +// Defines stack size for threads with zero stack size specified. +// Default: 3072 +#ifndef OS_STACK_SIZE +#define OS_STACK_SIZE 3072 +#endif + +// Idle Thread Stack size [bytes] <72-1073741824:8> +// Defines stack size for Idle thread. +// Default: 512 +#ifndef OS_IDLE_THREAD_STACK_SIZE +#define OS_IDLE_THREAD_STACK_SIZE 512 +#endif + +// Idle Thread TrustZone Module Identifier +// Defines TrustZone Thread Context Management Identifier. +// Applies only to cores with TrustZone technology. +// Default: 0 (not used) +#ifndef OS_IDLE_THREAD_TZ_MOD_ID +#define OS_IDLE_THREAD_TZ_MOD_ID 0 +#endif + +// Idle Thread Safety Class <0-15> +// Defines the Safety Class number. +// Default: 0 +#ifndef OS_IDLE_THREAD_CLASS +#define OS_IDLE_THREAD_CLASS 0 +#endif + +// Idle Thread Zone <0-127> +// Defines Thread Zone. +// Default: 0 +#ifndef OS_IDLE_THREAD_ZONE +#define OS_IDLE_THREAD_ZONE 0 +#endif + +// Stack overrun checking +// Enables stack overrun check at thread switch (requires RTX source variant). +// Enabling this option increases slightly the execution time of a thread switch. +#ifndef OS_STACK_CHECK +#define OS_STACK_CHECK 1 +#endif + +// Stack usage watermark +// Initializes thread stack with watermark pattern for analyzing stack usage. +// Enabling this option increases significantly the execution time of thread creation. +#ifndef OS_STACK_WATERMARK +#define OS_STACK_WATERMARK 0 +#endif + +// Default Processor mode for Thread execution +// <0=> Unprivileged mode +// <1=> Privileged mode +// Default: Unprivileged mode +#ifndef OS_PRIVILEGE_MODE +#define OS_PRIVILEGE_MODE 1 +#endif + +// + +// Timer Configuration +// ====================== + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_TIMER_OBJ_MEM +#define OS_TIMER_OBJ_MEM 0 +#endif + +// Number of Timer objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_TIMER_NUM +#define OS_TIMER_NUM 1 +#endif + +// + +// Timer Thread Priority +// <8=> Low +// <16=> Below Normal <24=> Normal <32=> Above Normal +// <40=> High +// <48=> Realtime +// Defines priority for timer thread +// Default: High +#ifndef OS_TIMER_THREAD_PRIO +#define OS_TIMER_THREAD_PRIO 40 +#endif + +// Timer Thread Stack size [bytes] <0-1073741824:8> +// Defines stack size for Timer thread. +// May be set to 0 when timers are not used. +// Default: 512 +#ifndef OS_TIMER_THREAD_STACK_SIZE +#define OS_TIMER_THREAD_STACK_SIZE 512 +#endif + +// Timer Thread TrustZone Module Identifier +// Defines TrustZone Thread Context Management Identifier. +// Applies only to cores with TrustZone technology. +// Default: 0 (not used) +#ifndef OS_TIMER_THREAD_TZ_MOD_ID +#define OS_TIMER_THREAD_TZ_MOD_ID 0 +#endif + +// Timer Thread Safety Class <0-15> +// Defines the Safety Class number. +// Default: 0 +#ifndef OS_TIMER_THREAD_CLASS +#define OS_TIMER_THREAD_CLASS 0 +#endif + +// Timer Thread Zone <0-127> +// Defines Thread Zone. +// Default: 0 +#ifndef OS_TIMER_THREAD_ZONE +#define OS_TIMER_THREAD_ZONE 0 +#endif + +// Timer Callback Queue entries <0-256> +// Number of concurrent active timer callback functions. +// May be set to 0 when timers are not used. +// Default: 4 +#ifndef OS_TIMER_CB_QUEUE +#define OS_TIMER_CB_QUEUE 4 +#endif + +// + +// Event Flags Configuration +// ============================ + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_EVFLAGS_OBJ_MEM +#define OS_EVFLAGS_OBJ_MEM 0 +#endif + +// Number of Event Flags objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_EVFLAGS_NUM +#define OS_EVFLAGS_NUM 1 +#endif + +// + +// + +// Mutex Configuration +// ====================== + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_MUTEX_OBJ_MEM +#define OS_MUTEX_OBJ_MEM 0 +#endif + +// Number of Mutex objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_MUTEX_NUM +#define OS_MUTEX_NUM 1 +#endif + +// + +// + +// Semaphore Configuration +// ========================== + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_SEMAPHORE_OBJ_MEM +#define OS_SEMAPHORE_OBJ_MEM 0 +#endif + +// Number of Semaphore objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_SEMAPHORE_NUM +#define OS_SEMAPHORE_NUM 1 +#endif + +// + +// + +// Memory Pool Configuration +// ============================ + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_MEMPOOL_OBJ_MEM +#define OS_MEMPOOL_OBJ_MEM 0 +#endif + +// Number of Memory Pool objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_MEMPOOL_NUM +#define OS_MEMPOOL_NUM 1 +#endif + +// Data Storage Memory size [bytes] <0-1073741824:8> +// Defines the combined data storage memory size. +// Applies to objects with system provided memory for data storage. +// Default: 0 +#ifndef OS_MEMPOOL_DATA_SIZE +#define OS_MEMPOOL_DATA_SIZE 0 +#endif + +// + +// + +// Message Queue Configuration +// ============================== + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_MSGQUEUE_OBJ_MEM +#define OS_MSGQUEUE_OBJ_MEM 0 +#endif + +// Number of Message Queue objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_MSGQUEUE_NUM +#define OS_MSGQUEUE_NUM 1 +#endif + +// Data Storage Memory size [bytes] <0-1073741824:8> +// Defines the combined data storage memory size. +// Applies to objects with system provided memory for data storage. +// Default: 0 +#ifndef OS_MSGQUEUE_DATA_SIZE +#define OS_MSGQUEUE_DATA_SIZE 0 +#endif + +// + +// + +// Event Recorder Configuration +// =============================== + +// Global Initialization +// Initialize Event Recorder during 'osKernelInitialize'. +#ifndef OS_EVR_INIT +#define OS_EVR_INIT 0 +#endif + +// Start recording +// Start event recording after initialization. +#ifndef OS_EVR_START +#define OS_EVR_START 1 +#endif + +// Global Event Filter Setup +// Initial recording level applied to all components. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_LEVEL +#define OS_EVR_LEVEL 0x00U +#endif + +// RTOS Event Filter Setup +// Recording levels for RTX components. +// Only applicable if events for the respective component are generated. + +// Memory Management +// Recording level for Memory Management events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_MEMORY_LEVEL +#define OS_EVR_MEMORY_LEVEL 0x81U +#endif + +// Kernel +// Recording level for Kernel events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_KERNEL_LEVEL +#define OS_EVR_KERNEL_LEVEL 0x81U +#endif + +// Thread +// Recording level for Thread events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_THREAD_LEVEL +#define OS_EVR_THREAD_LEVEL 0x85U +#endif + +// Generic Wait +// Recording level for Generic Wait events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_WAIT_LEVEL +#define OS_EVR_WAIT_LEVEL 0x81U +#endif + +// Thread Flags +// Recording level for Thread Flags events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_THFLAGS_LEVEL +#define OS_EVR_THFLAGS_LEVEL 0x81U +#endif + +// Event Flags +// Recording level for Event Flags events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_EVFLAGS_LEVEL +#define OS_EVR_EVFLAGS_LEVEL 0x81U +#endif + +// Timer +// Recording level for Timer events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_TIMER_LEVEL +#define OS_EVR_TIMER_LEVEL 0x81U +#endif + +// Mutex +// Recording level for Mutex events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_MUTEX_LEVEL +#define OS_EVR_MUTEX_LEVEL 0x81U +#endif + +// Semaphore +// Recording level for Semaphore events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_SEMAPHORE_LEVEL +#define OS_EVR_SEMAPHORE_LEVEL 0x81U +#endif + +// Memory Pool +// Recording level for Memory Pool events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_MEMPOOL_LEVEL +#define OS_EVR_MEMPOOL_LEVEL 0x81U +#endif + +// Message Queue +// Recording level for Message Queue events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_MSGQUEUE_LEVEL +#define OS_EVR_MSGQUEUE_LEVEL 0x81U +#endif + +// + +// + +// RTOS Event Generation +// Enables event generation for RTX components (requires RTX source variant). + +// Memory Management +// Enables Memory Management event generation. +#ifndef OS_EVR_MEMORY +#define OS_EVR_MEMORY 1 +#endif + +// Kernel +// Enables Kernel event generation. +#ifndef OS_EVR_KERNEL +#define OS_EVR_KERNEL 1 +#endif + +// Thread +// Enables Thread event generation. +#ifndef OS_EVR_THREAD +#define OS_EVR_THREAD 1 +#endif + +// Generic Wait +// Enables Generic Wait event generation. +#ifndef OS_EVR_WAIT +#define OS_EVR_WAIT 1 +#endif + +// Thread Flags +// Enables Thread Flags event generation. +#ifndef OS_EVR_THFLAGS +#define OS_EVR_THFLAGS 1 +#endif + +// Event Flags +// Enables Event Flags event generation. +#ifndef OS_EVR_EVFLAGS +#define OS_EVR_EVFLAGS 1 +#endif + +// Timer +// Enables Timer event generation. +#ifndef OS_EVR_TIMER +#define OS_EVR_TIMER 1 +#endif + +// Mutex +// Enables Mutex event generation. +#ifndef OS_EVR_MUTEX +#define OS_EVR_MUTEX 1 +#endif + +// Semaphore +// Enables Semaphore event generation. +#ifndef OS_EVR_SEMAPHORE +#define OS_EVR_SEMAPHORE 1 +#endif + +// Memory Pool +// Enables Memory Pool event generation. +#ifndef OS_EVR_MEMPOOL +#define OS_EVR_MEMPOOL 1 +#endif + +// Message Queue +// Enables Message Queue event generation. +#ifndef OS_EVR_MSGQUEUE +#define OS_EVR_MSGQUEUE 1 +#endif + +// + +// + +// Number of Threads which use standard C/C++ library libspace +// (when thread specific memory allocation is not used). +#if (OS_THREAD_OBJ_MEM == 0) +#ifndef OS_THREAD_LIBSPACE_NUM +#define OS_THREAD_LIBSPACE_NUM 4 +#endif +#else +#define OS_THREAD_LIBSPACE_NUM OS_THREAD_NUM +#endif + +//------------- <<< end of configuration section >>> --------------------------- + +#endif // RTX_CONFIG_H_ diff --git a/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h.base@5.6.0 b/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h.base@5.6.0 new file mode 100644 index 0000000..fe0c57b --- /dev/null +++ b/Examples/Blinky/CM7/RTE/CMSIS/RTX_Config.h.base@5.6.0 @@ -0,0 +1,663 @@ +/* + * Copyright (c) 2013-2023 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * ----------------------------------------------------------------------------- + * + * $Revision: V5.6.0 + * + * Project: CMSIS-RTOS RTX + * Title: RTX Configuration definitions + * + * ----------------------------------------------------------------------------- + */ + +#ifndef RTX_CONFIG_H_ +#define RTX_CONFIG_H_ + +#ifdef _RTE_ +#include "RTE_Components.h" +#ifdef RTE_RTX_CONFIG_H +#include RTE_RTX_CONFIG_H +#endif +#endif + +//-------- <<< Use Configuration Wizard in Context Menu >>> -------------------- + +// System Configuration +// ======================= + +// Global Dynamic Memory size [bytes] <0-1073741824:8> +// Defines the combined global dynamic memory size. +// Default: 32768 +#ifndef OS_DYNAMIC_MEM_SIZE +#define OS_DYNAMIC_MEM_SIZE 32768 +#endif + +// Kernel Tick Frequency [Hz] <1-1000000> +// Defines base time unit for delays and timeouts. +// Default: 1000 (1ms tick) +#ifndef OS_TICK_FREQ +#define OS_TICK_FREQ 1000 +#endif + +// Round-Robin Thread switching +// Enables Round-Robin Thread switching. +#ifndef OS_ROBIN_ENABLE +#define OS_ROBIN_ENABLE 1 +#endif + +// Round-Robin Timeout <1-1000> +// Defines how many ticks a thread will execute before a thread switch. +// Default: 5 +#ifndef OS_ROBIN_TIMEOUT +#define OS_ROBIN_TIMEOUT 5 +#endif + +// + +// Safety features (Source variant only) +// Enables FuSa related features. +// Requires RTX Source variant. +// Enables: +// - selected features from this group +// - Thread functions: osThreadProtectPrivileged +#ifndef OS_SAFETY_FEATURES +#define OS_SAFETY_FEATURES 0 +#endif + +// Safety Class +// Threads assigned to lower classes cannot modify higher class threads. +// Enables: +// - Object attributes: osSafetyClass +// - Kernel functions: osKernelProtect, osKernelDestroyClass +// - Thread functions: osThreadGetClass, osThreadSuspendClass, osThreadResumeClass +#ifndef OS_SAFETY_CLASS +#define OS_SAFETY_CLASS 1 +#endif + +// MPU Protected Zone +// Access protection via MPU (Spatial isolation). +// Enables: +// - Thread attributes: osThreadZone +// - Thread functions: osThreadGetZone, osThreadTerminateZone +// - Zone Management: osZoneSetup_Callback +#ifndef OS_EXECUTION_ZONE +#define OS_EXECUTION_ZONE 1 +#endif + +// Thread Watchdog +// Watchdog alerts ensure timing for critical threads (Temporal isolation). +// Enables: +// - Thread functions: osThreadFeedWatchdog +// - Handler functions: osWatchdogAlarm_Handler +#ifndef OS_THREAD_WATCHDOG +#define OS_THREAD_WATCHDOG 1 +#endif + +// Object Pointer checking +// Check object pointer alignment and memory region. +#ifndef OS_OBJ_PTR_CHECK +#define OS_OBJ_PTR_CHECK 0 +#endif + +// SVC Function Pointer checking +// Check SVC function pointer alignment and memory region. +// User needs to define a linker execution region RTX_SVC_VENEERS +// containing input sections: rtx_*.o (.text.os.svc.veneer.*) +#ifndef OS_SVC_PTR_CHECK +#define OS_SVC_PTR_CHECK 0 +#endif + +// + +// ISR FIFO Queue +// <4=> 4 entries <8=> 8 entries <12=> 12 entries <16=> 16 entries +// <24=> 24 entries <32=> 32 entries <48=> 48 entries <64=> 64 entries +// <96=> 96 entries <128=> 128 entries <196=> 196 entries <256=> 256 entries +// RTOS Functions called from ISR store requests to this buffer. +// Default: 16 entries +#ifndef OS_ISR_FIFO_QUEUE +#define OS_ISR_FIFO_QUEUE 16 +#endif + +// Object Memory usage counters +// Enables object memory usage counters (requires RTX source variant). +#ifndef OS_OBJ_MEM_USAGE +#define OS_OBJ_MEM_USAGE 0 +#endif + +// + +// Thread Configuration +// ======================= + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_THREAD_OBJ_MEM +#define OS_THREAD_OBJ_MEM 0 +#endif + +// Number of user Threads <1-1000> +// Defines maximum number of user threads that can be active at the same time. +// Applies to user threads with system provided memory for control blocks. +#ifndef OS_THREAD_NUM +#define OS_THREAD_NUM 1 +#endif + +// Number of user Threads with default Stack size <0-1000> +// Defines maximum number of user threads with default stack size. +// Applies to user threads with zero stack size specified. +#ifndef OS_THREAD_DEF_STACK_NUM +#define OS_THREAD_DEF_STACK_NUM 0 +#endif + +// Total Stack size [bytes] for user Threads with user-provided Stack size <0-1073741824:8> +// Defines the combined stack size for user threads with user-provided stack size. +// Applies to user threads with user-provided stack size and system provided memory for stack. +// Default: 0 +#ifndef OS_THREAD_USER_STACK_SIZE +#define OS_THREAD_USER_STACK_SIZE 0 +#endif + +// + +// Default Thread Stack size [bytes] <96-1073741824:8> +// Defines stack size for threads with zero stack size specified. +// Default: 3072 +#ifndef OS_STACK_SIZE +#define OS_STACK_SIZE 3072 +#endif + +// Idle Thread Stack size [bytes] <72-1073741824:8> +// Defines stack size for Idle thread. +// Default: 512 +#ifndef OS_IDLE_THREAD_STACK_SIZE +#define OS_IDLE_THREAD_STACK_SIZE 512 +#endif + +// Idle Thread TrustZone Module Identifier +// Defines TrustZone Thread Context Management Identifier. +// Applies only to cores with TrustZone technology. +// Default: 0 (not used) +#ifndef OS_IDLE_THREAD_TZ_MOD_ID +#define OS_IDLE_THREAD_TZ_MOD_ID 0 +#endif + +// Idle Thread Safety Class <0-15> +// Defines the Safety Class number. +// Default: 0 +#ifndef OS_IDLE_THREAD_CLASS +#define OS_IDLE_THREAD_CLASS 0 +#endif + +// Idle Thread Zone <0-127> +// Defines Thread Zone. +// Default: 0 +#ifndef OS_IDLE_THREAD_ZONE +#define OS_IDLE_THREAD_ZONE 0 +#endif + +// Stack overrun checking +// Enables stack overrun check at thread switch (requires RTX source variant). +// Enabling this option increases slightly the execution time of a thread switch. +#ifndef OS_STACK_CHECK +#define OS_STACK_CHECK 1 +#endif + +// Stack usage watermark +// Initializes thread stack with watermark pattern for analyzing stack usage. +// Enabling this option increases significantly the execution time of thread creation. +#ifndef OS_STACK_WATERMARK +#define OS_STACK_WATERMARK 0 +#endif + +// Default Processor mode for Thread execution +// <0=> Unprivileged mode +// <1=> Privileged mode +// Default: Unprivileged mode +#ifndef OS_PRIVILEGE_MODE +#define OS_PRIVILEGE_MODE 0 +#endif + +// + +// Timer Configuration +// ====================== + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_TIMER_OBJ_MEM +#define OS_TIMER_OBJ_MEM 0 +#endif + +// Number of Timer objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_TIMER_NUM +#define OS_TIMER_NUM 1 +#endif + +// + +// Timer Thread Priority +// <8=> Low +// <16=> Below Normal <24=> Normal <32=> Above Normal +// <40=> High +// <48=> Realtime +// Defines priority for timer thread +// Default: High +#ifndef OS_TIMER_THREAD_PRIO +#define OS_TIMER_THREAD_PRIO 40 +#endif + +// Timer Thread Stack size [bytes] <0-1073741824:8> +// Defines stack size for Timer thread. +// May be set to 0 when timers are not used. +// Default: 512 +#ifndef OS_TIMER_THREAD_STACK_SIZE +#define OS_TIMER_THREAD_STACK_SIZE 512 +#endif + +// Timer Thread TrustZone Module Identifier +// Defines TrustZone Thread Context Management Identifier. +// Applies only to cores with TrustZone technology. +// Default: 0 (not used) +#ifndef OS_TIMER_THREAD_TZ_MOD_ID +#define OS_TIMER_THREAD_TZ_MOD_ID 0 +#endif + +// Timer Thread Safety Class <0-15> +// Defines the Safety Class number. +// Default: 0 +#ifndef OS_TIMER_THREAD_CLASS +#define OS_TIMER_THREAD_CLASS 0 +#endif + +// Timer Thread Zone <0-127> +// Defines Thread Zone. +// Default: 0 +#ifndef OS_TIMER_THREAD_ZONE +#define OS_TIMER_THREAD_ZONE 0 +#endif + +// Timer Callback Queue entries <0-256> +// Number of concurrent active timer callback functions. +// May be set to 0 when timers are not used. +// Default: 4 +#ifndef OS_TIMER_CB_QUEUE +#define OS_TIMER_CB_QUEUE 4 +#endif + +// + +// Event Flags Configuration +// ============================ + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_EVFLAGS_OBJ_MEM +#define OS_EVFLAGS_OBJ_MEM 0 +#endif + +// Number of Event Flags objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_EVFLAGS_NUM +#define OS_EVFLAGS_NUM 1 +#endif + +// + +// + +// Mutex Configuration +// ====================== + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_MUTEX_OBJ_MEM +#define OS_MUTEX_OBJ_MEM 0 +#endif + +// Number of Mutex objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_MUTEX_NUM +#define OS_MUTEX_NUM 1 +#endif + +// + +// + +// Semaphore Configuration +// ========================== + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_SEMAPHORE_OBJ_MEM +#define OS_SEMAPHORE_OBJ_MEM 0 +#endif + +// Number of Semaphore objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_SEMAPHORE_NUM +#define OS_SEMAPHORE_NUM 1 +#endif + +// + +// + +// Memory Pool Configuration +// ============================ + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_MEMPOOL_OBJ_MEM +#define OS_MEMPOOL_OBJ_MEM 0 +#endif + +// Number of Memory Pool objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_MEMPOOL_NUM +#define OS_MEMPOOL_NUM 1 +#endif + +// Data Storage Memory size [bytes] <0-1073741824:8> +// Defines the combined data storage memory size. +// Applies to objects with system provided memory for data storage. +// Default: 0 +#ifndef OS_MEMPOOL_DATA_SIZE +#define OS_MEMPOOL_DATA_SIZE 0 +#endif + +// + +// + +// Message Queue Configuration +// ============================== + +// Object specific Memory allocation +// Enables object specific memory allocation. +#ifndef OS_MSGQUEUE_OBJ_MEM +#define OS_MSGQUEUE_OBJ_MEM 0 +#endif + +// Number of Message Queue objects <1-1000> +// Defines maximum number of objects that can be active at the same time. +// Applies to objects with system provided memory for control blocks. +#ifndef OS_MSGQUEUE_NUM +#define OS_MSGQUEUE_NUM 1 +#endif + +// Data Storage Memory size [bytes] <0-1073741824:8> +// Defines the combined data storage memory size. +// Applies to objects with system provided memory for data storage. +// Default: 0 +#ifndef OS_MSGQUEUE_DATA_SIZE +#define OS_MSGQUEUE_DATA_SIZE 0 +#endif + +// + +// + +// Event Recorder Configuration +// =============================== + +// Global Initialization +// Initialize Event Recorder during 'osKernelInitialize'. +#ifndef OS_EVR_INIT +#define OS_EVR_INIT 0 +#endif + +// Start recording +// Start event recording after initialization. +#ifndef OS_EVR_START +#define OS_EVR_START 1 +#endif + +// Global Event Filter Setup +// Initial recording level applied to all components. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_LEVEL +#define OS_EVR_LEVEL 0x00U +#endif + +// RTOS Event Filter Setup +// Recording levels for RTX components. +// Only applicable if events for the respective component are generated. + +// Memory Management +// Recording level for Memory Management events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_MEMORY_LEVEL +#define OS_EVR_MEMORY_LEVEL 0x81U +#endif + +// Kernel +// Recording level for Kernel events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_KERNEL_LEVEL +#define OS_EVR_KERNEL_LEVEL 0x81U +#endif + +// Thread +// Recording level for Thread events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_THREAD_LEVEL +#define OS_EVR_THREAD_LEVEL 0x85U +#endif + +// Generic Wait +// Recording level for Generic Wait events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_WAIT_LEVEL +#define OS_EVR_WAIT_LEVEL 0x81U +#endif + +// Thread Flags +// Recording level for Thread Flags events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_THFLAGS_LEVEL +#define OS_EVR_THFLAGS_LEVEL 0x81U +#endif + +// Event Flags +// Recording level for Event Flags events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_EVFLAGS_LEVEL +#define OS_EVR_EVFLAGS_LEVEL 0x81U +#endif + +// Timer +// Recording level for Timer events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_TIMER_LEVEL +#define OS_EVR_TIMER_LEVEL 0x81U +#endif + +// Mutex +// Recording level for Mutex events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_MUTEX_LEVEL +#define OS_EVR_MUTEX_LEVEL 0x81U +#endif + +// Semaphore +// Recording level for Semaphore events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_SEMAPHORE_LEVEL +#define OS_EVR_SEMAPHORE_LEVEL 0x81U +#endif + +// Memory Pool +// Recording level for Memory Pool events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_MEMPOOL_LEVEL +#define OS_EVR_MEMPOOL_LEVEL 0x81U +#endif + +// Message Queue +// Recording level for Message Queue events. +// Error events +// API function call events +// Operation events +// Detailed operation events +// +#ifndef OS_EVR_MSGQUEUE_LEVEL +#define OS_EVR_MSGQUEUE_LEVEL 0x81U +#endif + +// + +// + +// RTOS Event Generation +// Enables event generation for RTX components (requires RTX source variant). + +// Memory Management +// Enables Memory Management event generation. +#ifndef OS_EVR_MEMORY +#define OS_EVR_MEMORY 1 +#endif + +// Kernel +// Enables Kernel event generation. +#ifndef OS_EVR_KERNEL +#define OS_EVR_KERNEL 1 +#endif + +// Thread +// Enables Thread event generation. +#ifndef OS_EVR_THREAD +#define OS_EVR_THREAD 1 +#endif + +// Generic Wait +// Enables Generic Wait event generation. +#ifndef OS_EVR_WAIT +#define OS_EVR_WAIT 1 +#endif + +// Thread Flags +// Enables Thread Flags event generation. +#ifndef OS_EVR_THFLAGS +#define OS_EVR_THFLAGS 1 +#endif + +// Event Flags +// Enables Event Flags event generation. +#ifndef OS_EVR_EVFLAGS +#define OS_EVR_EVFLAGS 1 +#endif + +// Timer +// Enables Timer event generation. +#ifndef OS_EVR_TIMER +#define OS_EVR_TIMER 1 +#endif + +// Mutex +// Enables Mutex event generation. +#ifndef OS_EVR_MUTEX +#define OS_EVR_MUTEX 1 +#endif + +// Semaphore +// Enables Semaphore event generation. +#ifndef OS_EVR_SEMAPHORE +#define OS_EVR_SEMAPHORE 1 +#endif + +// Memory Pool +// Enables Memory Pool event generation. +#ifndef OS_EVR_MEMPOOL +#define OS_EVR_MEMPOOL 1 +#endif + +// Message Queue +// Enables Message Queue event generation. +#ifndef OS_EVR_MSGQUEUE +#define OS_EVR_MSGQUEUE 1 +#endif + +// + +// + +// Number of Threads which use standard C/C++ library libspace +// (when thread specific memory allocation is not used). +#if (OS_THREAD_OBJ_MEM == 0) +#ifndef OS_THREAD_LIBSPACE_NUM +#define OS_THREAD_LIBSPACE_NUM 4 +#endif +#else +#define OS_THREAD_LIBSPACE_NUM OS_THREAD_NUM +#endif + +//------------- <<< end of configuration section >>> --------------------------- + +#endif // RTX_CONFIG_H_ diff --git a/Examples/Blinky/CM7/RTE/Device/STM32H747XIHx_CM7/ac6_linker_script.sct.src b/Examples/Blinky/CM7/RTE/Device/STM32H747XIHx_CM7/ac6_linker_script.sct.src new file mode 100644 index 0000000..e0318c9 --- /dev/null +++ b/Examples/Blinky/CM7/RTE/Device/STM32H747XIHx_CM7/ac6_linker_script.sct.src @@ -0,0 +1,115 @@ +/* + * Copyright (c) 2023 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/* Stack and Heap are configured in startup file */ +#define __STACK_SIZE 0 +#define __HEAP_SIZE 0 + +/* ---------------------------------------------------------------------------- + Stack seal size definition + *----------------------------------------------------------------------------*/ +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define __STACKSEAL_SIZE 8 +#else +#define __STACKSEAL_SIZE 0 +#endif + +/*---------------------------------------------------------------------------- + Scatter File Definitions definition + *----------------------------------------------------------------------------*/ + +LR_ROM0 __ROM0_BASE __ROM0_SIZE { + + ER_ROM0 __ROM0_BASE __ROM0_SIZE { + *.o (RESET, +First) + *(InRoot$$Sections) + *(+RO +XO) + } + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + ER_CMSE_VENEER AlignExpr(+0, 32) (__ROM0_SIZE - AlignExpr(ImageLength(ER_ROM0), 32)) { + *(Veneer$$CMSE) + } +#endif + + RW_NOINIT __RAM0_BASE UNINIT (__RAM0_SIZE - __HEAP_SIZE - __STACK_SIZE - __STACKSEAL_SIZE) { + *.o(.bss.noinit) + *.o(.bss.noinit.*) + } + + RW_RAM0 AlignExpr(+0, 8) (__RAM0_SIZE - __HEAP_SIZE - __STACK_SIZE - __STACKSEAL_SIZE - AlignExpr(ImageLength(RW_NOINIT), 8)) { + *(+RW +ZI) + } + +#if __HEAP_SIZE > 0 + ARM_LIB_HEAP (AlignExpr(+0, 8)) EMPTY __HEAP_SIZE { ; Reserve empty region for heap + } +#endif + +#if __STACK_SIZE > 0 + ARM_LIB_STACK (__RAM0_BASE + __RAM0_SIZE - __STACKSEAL_SIZE) EMPTY -__STACK_SIZE { ; Reserve empty region for stack + } +#endif + +#if __STACKSEAL_SIZE > 0 + STACKSEAL +0 EMPTY __STACKSEAL_SIZE { ; Reserve empty region for stack seal immediately after stack + } +#endif + +#if __RAM1_SIZE > 0 + RW_RAM1 __RAM1_BASE __RAM1_SIZE { + .ANY (+RW +ZI) + } +#endif + +#if __RAM2_SIZE > 0 + RW_RAM2 __RAM2_BASE __RAM2_SIZE { + .ANY (+RW +ZI) + } +#endif + +#if __RAM3_SIZE > 0 + RW_RAM3 __RAM3_BASE __RAM3_SIZE { + .ANY (+RW +ZI) + } +#endif +} + +#if __ROM1_SIZE > 0 +LR_ROM1 __ROM1_BASE __ROM1_SIZE { + ER_ROM1 +0 __ROM1_SIZE { + .ANY (+RO +XO) + } +} +#endif + +#if __ROM2_SIZE > 0 +LR_ROM2 __ROM2_BASE __ROM2_SIZE { + ER_ROM2 +0 __ROM2_SIZE { + .ANY (+RO +XO) + } +} +#endif + +#if __ROM3_SIZE > 0 +LR_ROM3 __ROM3_BASE __ROM3_SIZE { + ER_ROM3 +0 __ROM3_SIZE { + .ANY (+RO +XO) + } +} +#endif diff --git a/Examples/Blinky/CM7/RTE/Device/STM32H747XIHx_CM7/regions_STM32H747I-EVAL.h b/Examples/Blinky/CM7/RTE/Device/STM32H747XIHx_CM7/regions_STM32H747I-EVAL.h new file mode 100644 index 0000000..d02cef3 --- /dev/null +++ b/Examples/Blinky/CM7/RTE/Device/STM32H747XIHx_CM7/regions_STM32H747I-EVAL.h @@ -0,0 +1,96 @@ +#ifndef REGIONS_STM32H747I_EVAL_H +#define REGIONS_STM32H747I_EVAL_H + + +//-------- <<< Use Configuration Wizard in Context Menu >>> -------------------- +//------ With VS Code: Open Preview for Configuration Wizard ------------------- + +// Auto-generated using information from packs +// Device Family Pack (DFP): Keil::STM32H7xx_DFP@4.0.0 +// Board Support Pack (BSP): Keil::STM32H747I-EVAL_BSP@1.0.0 + +// ROM Configuration +// ======================= +// __ROM0 (is rx memory: FLASH_Bank1 from DFP) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. Default: 0x08000000 +// Contains Startup and Vector Table +#define __ROM0_BASE 0x08000000 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. Default: 0x00100000 +#define __ROM0_SIZE 0x00100000 +// + +// __ROM1 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __ROM1_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __ROM1_SIZE 0 +// + +// __ROM2 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __ROM2_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __ROM2_SIZE 0 +// + +// __ROM3 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __ROM3_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __ROM3_SIZE 0 +// + +// + +// RAM Configuration +// ======================= +// __RAM0 (is rw memory: RAM_D1 from DFP) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. Default: 0x24000000 +// Contains uninitialized RAM, Stack, and Heap +#define __RAM0_BASE 0x24000000 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. Default: 0x00080000 +#define __RAM0_SIZE 0x00080000 +// + +// __RAM1 (is rw memory: RAM_D3 from DFP) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. Default: 0x38000000 +#define __RAM1_BASE 0x38000000 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. Default: 0x00010000 +#define __RAM1_SIZE 0x00010000 +// + +// __RAM2 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __RAM2_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __RAM2_SIZE 0 +// + +// __RAM3 (unused) +// Base address <0x0-0xFFFFFFFF:8> +// Defines base address of memory region. +#define __RAM3_BASE 0 +// Region size [bytes] <0x0-0xFFFFFFFF:8> +// Defines size of memory region. +#define __RAM3_SIZE 0 +// + +// Resources that are not allocated to linker regions +// rw RAM: DTCMRAM from DFP: BASE: 0x20000000 SIZE: 0x00020000 Pname: CM7 + + +#endif /* REGIONS_STM32H747I_EVAL_H */ diff --git a/Examples/Blinky/CM7/retarget_stdio.c b/Examples/Blinky/CM7/retarget_stdio.c new file mode 100644 index 0000000..5e15595 --- /dev/null +++ b/Examples/Blinky/CM7/retarget_stdio.c @@ -0,0 +1,139 @@ +/*--------------------------------------------------------------------------- + * Copyright (c) 2024 Arm Limited (or its affiliates). + * All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * Name: retarget_stdio.c + * Purpose: Retarget stdio to CMSIS UART + * + *---------------------------------------------------------------------------*/ + +#ifdef CMSIS_target_header +#include CMSIS_target_header +#else +#include "Driver_USART.h" +#endif + +#ifndef RETARGET_STDIO_UART +#error "RETARGET_STDIO_UART not defined!" +#endif + +// Compile-time configuration +#define UART_BAUDRATE 115200 + +// Exported functions +extern int stdio_init (void); +extern int stderr_putchar (int ch); +extern int stdout_putchar (int ch); +extern int stdin_getchar (void); + +#ifndef CMSIS_target_header +extern ARM_DRIVER_USART ARM_Driver_USART_(RETARGET_STDIO_UART); +#endif + +#define ptrUSART (&ARM_Driver_USART_(RETARGET_STDIO_UART)) + +/** + Initialize stdio + + \return 0 on success, or -1 on error. +*/ +int stdio_init (void) { + + if (ptrUSART->Initialize(NULL) != ARM_DRIVER_OK) { + return -1; + } + + if (ptrUSART->PowerControl(ARM_POWER_FULL) != ARM_DRIVER_OK) { + return -1; + } + + if (ptrUSART->Control(ARM_USART_MODE_ASYNCHRONOUS | + ARM_USART_DATA_BITS_8 | + ARM_USART_PARITY_NONE | + ARM_USART_STOP_BITS_1 | + ARM_USART_FLOW_CONTROL_NONE, + UART_BAUDRATE) != ARM_DRIVER_OK) { + return -1; + } + + if (ptrUSART->Control(ARM_USART_CONTROL_RX, 1U) != ARM_DRIVER_OK) { + return -1; + } + + if (ptrUSART->Control(ARM_USART_CONTROL_TX, 1U) != ARM_DRIVER_OK) { + return -1; + } + + return 0; +} + +/** + Put a character to the stderr + + \param[in] ch Character to output + \return The character written, or -1 on write error. +*/ +int stderr_putchar (int ch) { + uint8_t buf[1]; + + buf[0] = (uint8_t)ch; + + if (ptrUSART->Send(buf, 1U) != ARM_DRIVER_OK) { + return -1; + } + + while (ptrUSART->GetStatus().tx_busy != 0U); + + return ch; +} + +/** + Put a character to the stdout + + \param[in] ch Character to output + \return The character written, or -1 on write error. +*/ +int stdout_putchar (int ch) { + uint8_t buf[1]; + + buf[0] = (uint8_t)ch; + + if (ptrUSART->Send(buf, 1U) != ARM_DRIVER_OK) { + return -1; + } + + while (ptrUSART->GetStatus().tx_busy != 0U); + + return ch; +} + +/** + Get a character from the stdio + + \return The next character from the input, or -1 on read error. +*/ +int stdin_getchar (void) { + uint8_t buf[1]; + + if (ptrUSART->Receive(buf, 1U) != ARM_DRIVER_OK) { + return -1; + } + + while (ptrUSART->GetStatus().rx_busy != 0U); + + return (int)buf[0]; +} diff --git a/Examples/Blinky/README.md b/Examples/Blinky/README.md new file mode 100644 index 0000000..113aa84 --- /dev/null +++ b/Examples/Blinky/README.md @@ -0,0 +1,37 @@ +# Blinky project + +The **Blinky** project is a simple example that can be used to verify the +basic tool setup. + +It is compliant to the Cortex Microcontroller Software Interface Standard (CMSIS) +and uses the CMSIS-RTOS2 API interface for RTOS functionality. The CMSIS-RTOS2 API +is available with various real-time operating systems, for example RTX5 or FreeRTOS. + +## Operation + +**CPU1 - Cortex-M7:** +- Wait until CPU2 boots and enters stop mode. +- System initialization. +- Wake-up CPU2. +- The vioLED0 blinks in 1 sec interval. +- The vioBUTTON0 changes the blink frequency. + +**CPU2 - Cortex-M4:** +- Go to stop mode. +- Wait for CPU1 to perform system initialization. +- The vioLED1 blinks in 2 sec interval. + +### CMSIS-Driver Virtual I/O mapping + +| CMSIS-Driver VIO | Board component +|:----------------------|:-------------------------------------- +| vioBUTTON0 | USER button (B1) +| vioLED0 | LED red (LD3) +| vioLED1 | LED green (LD1) + +### Board Configuration + +**Note** + - USART1 is shared with the RS-232 of the STLINK-V3E controller. + - Insure that the **JP7** jumper is bridged in the **23** position (USART1_TX) + - Insure that the **JP8** jumper is bridged in the **23** position (USART1_RX) diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/Blinky_cm4.cgen.yml b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/Blinky_cm4.cgen.yml new file mode 100644 index 0000000..1703571 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/Blinky_cm4.cgen.yml @@ -0,0 +1,57 @@ +generator-import: + for-device: STM32H747XIHx + for-board: STM32H747I-EVAL + define: + - CORE_CM4 + - USE_HAL_DRIVER + - STM32H747xx + add-path: + - ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc + - ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy + - ./STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/Include + - ./STM32CubeMX/CM4/Inc + - ./MX_Device/CM4 + groups: + - group: CubeMX + files: + - file: ./STM32CubeMX/CM4/Src/main.c + - file: ./STM32CubeMX/CM4/Src/stm32h7xx_it.c + - file: ./STM32CubeMX/CM4/Src/stm32h7xx_hal_msp.c + - file: ./STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM4.s + - file: ./STM32CubeMX/Common/Src/system_stm32h7xx_dualcore_boot_cm4_cm7.c + - group: STM32 HAL Driver + files: + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dfsdm.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_fmc.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sram.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sdram.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_qspi.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_sdmmc.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_delayblock.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/Blinky_cm7.cgen.yml b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/Blinky_cm7.cgen.yml new file mode 100644 index 0000000..141c3c9 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/Blinky_cm7.cgen.yml @@ -0,0 +1,64 @@ +generator-import: + for-device: STM32H747XIHx + for-board: STM32H747I-EVAL + define: + - CORE_CM7 + - USE_HAL_DRIVER + - STM32H747xx + add-path: + - ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc + - ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy + - ./STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/Include + - ./STM32CubeMX/CM7/Inc + - ./MX_Device/CM7 + groups: + - group: CubeMX + files: + - file: ./STM32CubeMX/CM7/Src/main.c + - file: ./STM32CubeMX/CM7/Src/stm32h7xx_it.c + - file: ./STM32CubeMX/CM7/Src/stm32h7xx_hal_msp.c + - file: ./STM32CubeMX/CM7/Src/stm32h7xx_hal_timebase_tim.c + - file: ./STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM7.s + - file: ./STM32CubeMX/Common/Src/system_stm32h7xx_dualcore_boot_cm4_cm7.c + - group: STM32 HAL Driver + files: + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dfsdm.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dsi.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_fmc.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sram.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sdram.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_qspi.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_sdmmc.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_delayblock.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd_ex.c + - file: ./STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_usb.c diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/MX_Device/CM4/MX_Device.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/MX_Device/CM4/MX_Device.h new file mode 100644 index 0000000..532f755 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/MX_Device/CM4/MX_Device.h @@ -0,0 +1,127 @@ +/****************************************************************************** + * File Name : MX_Device.h + * Date : 26/09/2024 08:55:18 + * Description : STM32Cube MX parameter definitions + * Note : This file is generated with a generator out of the + * STM32CubeMX project and its generated files (DO NOT EDIT!) + ******************************************************************************/ + +#ifndef MX_DEVICE_H__ +#define MX_DEVICE_H__ + +/* MX_Device.h version */ +#define MX_DEVICE_VERSION 0x01000000 + + +/*------------------------------ ETH -----------------------------*/ +#define MX_ETH 1 + +/* Pins */ + +/* ETH_CRS_DV */ +#define MX_ETH_CRS_DV_Pin PA7 +#define MX_ETH_CRS_DV_GPIO_Pin GPIO_PIN_7 +#define MX_ETH_CRS_DV_GPIOx GPIOA +#define MX_ETH_CRS_DV_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_CRS_DV_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_CRS_DV_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_CRS_DV_GPIO_AF GPIO_AF11_ETH + +/* ETH_MDC */ +#define MX_ETH_MDC_Pin PC1 +#define MX_ETH_MDC_GPIO_Pin GPIO_PIN_1 +#define MX_ETH_MDC_GPIOx GPIOC +#define MX_ETH_MDC_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_MDC_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_MDC_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_MDC_GPIO_AF GPIO_AF11_ETH + +/* ETH_MDIO */ +#define MX_ETH_MDIO_Pin PA2 +#define MX_ETH_MDIO_GPIO_Pin GPIO_PIN_2 +#define MX_ETH_MDIO_GPIOx GPIOA +#define MX_ETH_MDIO_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_MDIO_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_MDIO_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_MDIO_GPIO_AF GPIO_AF11_ETH + +/* ETH_REF_CLK */ +#define MX_ETH_REF_CLK_Pin PA1 +#define MX_ETH_REF_CLK_GPIO_Pin GPIO_PIN_1 +#define MX_ETH_REF_CLK_GPIOx GPIOA +#define MX_ETH_REF_CLK_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_REF_CLK_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_REF_CLK_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_REF_CLK_GPIO_AF GPIO_AF11_ETH + +/* ETH_RXD0 */ +#define MX_ETH_RXD0_Pin PC4 +#define MX_ETH_RXD0_GPIO_Pin GPIO_PIN_4 +#define MX_ETH_RXD0_GPIOx GPIOC +#define MX_ETH_RXD0_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_RXD0_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_RXD0_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_RXD0_GPIO_AF GPIO_AF11_ETH + +/* ETH_RXD1 */ +#define MX_ETH_RXD1_Pin PC5 +#define MX_ETH_RXD1_GPIO_Pin GPIO_PIN_5 +#define MX_ETH_RXD1_GPIOx GPIOC +#define MX_ETH_RXD1_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_RXD1_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_RXD1_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_RXD1_GPIO_AF GPIO_AF11_ETH + +/* ETH_TXD0 */ +#define MX_ETH_TXD0_Pin PG13 +#define MX_ETH_TXD0_GPIO_Pin GPIO_PIN_13 +#define MX_ETH_TXD0_GPIOx GPIOG +#define MX_ETH_TXD0_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_TXD0_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_TXD0_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_TXD0_GPIO_AF GPIO_AF11_ETH + +/* ETH_TXD1 */ +#define MX_ETH_TXD1_Pin PG12 +#define MX_ETH_TXD1_GPIO_Pin GPIO_PIN_12 +#define MX_ETH_TXD1_GPIOx GPIOG +#define MX_ETH_TXD1_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_TXD1_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_TXD1_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_TXD1_GPIO_AF GPIO_AF11_ETH + +/* ETH_TX_EN */ +#define MX_ETH_TX_EN_Pin PG11 +#define MX_ETH_TX_EN_GPIO_Pin GPIO_PIN_11 +#define MX_ETH_TX_EN_GPIOx GPIOG +#define MX_ETH_TX_EN_GPIO_Mode GPIO_MODE_AF_PP +#define MX_ETH_TX_EN_GPIO_PuPd GPIO_NOPULL +#define MX_ETH_TX_EN_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_ETH_TX_EN_GPIO_AF GPIO_AF11_ETH + +/*------------------------------ I2C1 -----------------------------*/ +#define MX_I2C1 1 + +/* Peripheral Clock Frequency */ +#define MX_I2C1_PERIPH_CLOCK_FREQ 75000000 + + +/*------------------------------ SDMMC1 -----------------------------*/ +#define MX_SDMMC1 1 + +/* Mode */ +#define MX_SDMMC1_MODE_SD 1 + +/* Peripheral Clock Frequency */ +#define MX_SDMMC1_PERIPH_CLOCK_FREQ 150000000 + + +/*------------------------------ USART1 -----------------------------*/ +#define MX_USART1 1 + +/* Virtual mode */ +#define MX_USART1_VM VM_ASYNC +#define MX_USART1_VM_ASYNC 1 + + +#endif /* MX_DEVICE_H__ */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/MX_Device/CM7/MX_Device.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/MX_Device/CM7/MX_Device.h new file mode 100644 index 0000000..b52a074 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/MX_Device/CM7/MX_Device.h @@ -0,0 +1,335 @@ +/****************************************************************************** + * File Name : MX_Device.h + * Date : 26/09/2024 08:55:18 + * Description : STM32Cube MX parameter definitions + * Note : This file is generated with a generator out of the + * STM32CubeMX project and its generated files (DO NOT EDIT!) + ******************************************************************************/ + +#ifndef MX_DEVICE_H__ +#define MX_DEVICE_H__ + +/* MX_Device.h version */ +#define MX_DEVICE_VERSION 0x01000000 + + +/*------------------------------ ETH -----------------------------*/ +#define MX_ETH 1 + + +/*------------------------------ I2C1 -----------------------------*/ +#define MX_I2C1 1 + +/* Filter Settings */ +#define MX_I2C1_ANF_ENABLE 1 +#define MX_I2C1_DNF 0 + +/* Peripheral Clock Frequency */ +#define MX_I2C1_PERIPH_CLOCK_FREQ 75000000 + +/* Pins */ + +/* I2C1_SCL */ +#define MX_I2C1_SCL_Pin PB6 +#define MX_I2C1_SCL_GPIO_Pin GPIO_PIN_6 +#define MX_I2C1_SCL_GPIOx GPIOB +#define MX_I2C1_SCL_GPIO_Mode GPIO_MODE_AF_OD +#define MX_I2C1_SCL_GPIO_PuPd GPIO_PULLUP +#define MX_I2C1_SCL_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_I2C1_SCL_GPIO_AF GPIO_AF4_I2C1 + +/* I2C1_SDA */ +#define MX_I2C1_SDA_Pin PB7 +#define MX_I2C1_SDA_GPIO_Pin GPIO_PIN_7 +#define MX_I2C1_SDA_GPIOx GPIOB +#define MX_I2C1_SDA_GPIO_Mode GPIO_MODE_AF_OD +#define MX_I2C1_SDA_GPIO_PuPd GPIO_PULLUP +#define MX_I2C1_SDA_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_I2C1_SDA_GPIO_AF GPIO_AF4_I2C1 + +/*------------------------------ SDMMC1 -----------------------------*/ +#define MX_SDMMC1 1 + +/* Mode */ +#define MX_SDMMC1_MODE_SD 1 + +/* Peripheral Clock Frequency */ +#define MX_SDMMC1_PERIPH_CLOCK_FREQ 150000000 + +/* Pins */ + +/* SDMMC1_CDIR */ +#define MX_SDMMC1_CDIR_Pin PB9 +#define MX_SDMMC1_CDIR_GPIO_Pin GPIO_PIN_9 +#define MX_SDMMC1_CDIR_GPIOx GPIOB +#define MX_SDMMC1_CDIR_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_CDIR_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_CDIR_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_CDIR_GPIO_AF GPIO_AF7_SDIO1 + +/* SDMMC1_CK */ +#define MX_SDMMC1_CK_Pin PC12 +#define MX_SDMMC1_CK_GPIO_Pin GPIO_PIN_12 +#define MX_SDMMC1_CK_GPIOx GPIOC +#define MX_SDMMC1_CK_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_CK_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_CK_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_CK_GPIO_AF GPIO_AF12_SDIO1 + +/* SDMMC1_CKIN */ +#define MX_SDMMC1_CKIN_Pin PB8 +#define MX_SDMMC1_CKIN_GPIO_Pin GPIO_PIN_8 +#define MX_SDMMC1_CKIN_GPIOx GPIOB +#define MX_SDMMC1_CKIN_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_CKIN_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_CKIN_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_CKIN_GPIO_AF GPIO_AF7_SDIO1 + +/* SDMMC1_CMD */ +#define MX_SDMMC1_CMD_Pin PD2 +#define MX_SDMMC1_CMD_GPIO_Pin GPIO_PIN_2 +#define MX_SDMMC1_CMD_GPIOx GPIOD +#define MX_SDMMC1_CMD_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_CMD_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_CMD_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_CMD_GPIO_AF GPIO_AF12_SDIO1 + +/* SDMMC1_D0 */ +#define MX_SDMMC1_D0_Pin PC8 +#define MX_SDMMC1_D0_GPIO_Pin GPIO_PIN_8 +#define MX_SDMMC1_D0_GPIOx GPIOC +#define MX_SDMMC1_D0_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_D0_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_D0_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_D0_GPIO_AF GPIO_AF12_SDIO1 + +/* SDMMC1_D0DIR */ +#define MX_SDMMC1_D0DIR_Pin PC6 +#define MX_SDMMC1_D0DIR_GPIO_Pin GPIO_PIN_6 +#define MX_SDMMC1_D0DIR_GPIOx GPIOC +#define MX_SDMMC1_D0DIR_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_D0DIR_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_D0DIR_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_D0DIR_GPIO_AF GPIO_AF8_SDIO1 + +/* SDMMC1_D1 */ +#define MX_SDMMC1_D1_Pin PC9 +#define MX_SDMMC1_D1_GPIO_Pin GPIO_PIN_9 +#define MX_SDMMC1_D1_GPIOx GPIOC +#define MX_SDMMC1_D1_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_D1_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_D1_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_D1_GPIO_AF GPIO_AF12_SDIO1 + +/* SDMMC1_D123DIR */ +#define MX_SDMMC1_D123DIR_Pin PC7 +#define MX_SDMMC1_D123DIR_GPIO_Pin GPIO_PIN_7 +#define MX_SDMMC1_D123DIR_GPIOx GPIOC +#define MX_SDMMC1_D123DIR_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_D123DIR_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_D123DIR_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_D123DIR_GPIO_AF GPIO_AF8_SDIO1 + +/* SDMMC1_D2 */ +#define MX_SDMMC1_D2_Pin PC10 +#define MX_SDMMC1_D2_GPIO_Pin GPIO_PIN_10 +#define MX_SDMMC1_D2_GPIOx GPIOC +#define MX_SDMMC1_D2_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_D2_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_D2_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_D2_GPIO_AF GPIO_AF12_SDIO1 + +/* SDMMC1_D3 */ +#define MX_SDMMC1_D3_Pin PC11 +#define MX_SDMMC1_D3_GPIO_Pin GPIO_PIN_11 +#define MX_SDMMC1_D3_GPIOx GPIOC +#define MX_SDMMC1_D3_GPIO_Mode GPIO_MODE_AF_PP +#define MX_SDMMC1_D3_GPIO_PuPd GPIO_NOPULL +#define MX_SDMMC1_D3_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH +#define MX_SDMMC1_D3_GPIO_AF GPIO_AF12_SDIO1 + +/*------------------------------ USART1 -----------------------------*/ +#define MX_USART1 1 + +/* Virtual mode */ +#define MX_USART1_VM VM_ASYNC +#define MX_USART1_VM_ASYNC 1 + +/* Pins */ + +/* USART1_RX */ +#define MX_USART1_RX_Pin PB15 +#define MX_USART1_RX_GPIO_Pin GPIO_PIN_15 +#define MX_USART1_RX_GPIOx GPIOB +#define MX_USART1_RX_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USART1_RX_GPIO_PuPd GPIO_NOPULL +#define MX_USART1_RX_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_USART1_RX_GPIO_AF GPIO_AF4_USART1 + +/* USART1_TX */ +#define MX_USART1_TX_Pin PB14 +#define MX_USART1_TX_GPIO_Pin GPIO_PIN_14 +#define MX_USART1_TX_GPIOx GPIOB +#define MX_USART1_TX_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USART1_TX_GPIO_PuPd GPIO_NOPULL +#define MX_USART1_TX_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_USART1_TX_GPIO_AF GPIO_AF4_USART1 + +/*------------------------------ USB_OTG_FS -----------------------------*/ +#define MX_USB_OTG_FS 1 + +/* Handle */ +#define MX_USB_OTG_FS_HANDLE hpcd_USB_OTG_FS + +/* Virtual mode */ +#define MX_USB_OTG_FS_VM Device_Only +#define MX_USB_OTG_FS_Device_Only 1 + +/* Pins */ + +/* USB_OTG_FS_DM */ +#define MX_USB_OTG_FS_DM_Pin PA11 +#define MX_USB_OTG_FS_DM_GPIO_Pin GPIO_PIN_11 +#define MX_USB_OTG_FS_DM_GPIOx GPIOA +#define MX_USB_OTG_FS_DM_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_FS_DM_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_FS_DM_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_USB_OTG_FS_DM_GPIO_AF GPIO_AF10_OTG1_FS + +/* USB_OTG_FS_DP */ +#define MX_USB_OTG_FS_DP_Pin PA12 +#define MX_USB_OTG_FS_DP_GPIO_Pin GPIO_PIN_12 +#define MX_USB_OTG_FS_DP_GPIOx GPIOA +#define MX_USB_OTG_FS_DP_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_FS_DP_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_FS_DP_GPIO_Speed GPIO_SPEED_FREQ_LOW +#define MX_USB_OTG_FS_DP_GPIO_AF GPIO_AF10_OTG1_FS + +/* USB_OTG_FS_VBUS */ +#define MX_USB_OTG_FS_VBUS_Pin PA9 +#define MX_USB_OTG_FS_VBUS_GPIO_Pin GPIO_PIN_9 +#define MX_USB_OTG_FS_VBUS_GPIOx GPIOA +#define MX_USB_OTG_FS_VBUS_GPIO_Mode GPIO_MODE_INPUT +#define MX_USB_OTG_FS_VBUS_GPIO_PuPd GPIO_NOPULL + +/*------------------------------ USB_OTG_HS -----------------------------*/ +#define MX_USB_OTG_HS 1 + +/* Handle */ +#define MX_USB_OTG_HS_HANDLE hpcd_USB_OTG_HS + +/* Virtual mode */ +#define MX_USB_OTG_HS_VM Device_HS +#define MX_USB_OTG_HS_Device_HS 1 + +/* Pins */ + +/* USB_OTG_HS_ULPI_CK */ +#define MX_USB_OTG_HS_ULPI_CK_Pin PA5 +#define MX_USB_OTG_HS_ULPI_CK_GPIO_Pin GPIO_PIN_5 +#define MX_USB_OTG_HS_ULPI_CK_GPIOx GPIOA +#define MX_USB_OTG_HS_ULPI_CK_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_CK_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_CK_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_CK_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_D0 */ +#define MX_USB_OTG_HS_ULPI_D0_Pin PA3 +#define MX_USB_OTG_HS_ULPI_D0_GPIO_Pin GPIO_PIN_3 +#define MX_USB_OTG_HS_ULPI_D0_GPIOx GPIOA +#define MX_USB_OTG_HS_ULPI_D0_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_D0_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_D0_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_D0_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_D1 */ +#define MX_USB_OTG_HS_ULPI_D1_Pin PB0 +#define MX_USB_OTG_HS_ULPI_D1_GPIO_Pin GPIO_PIN_0 +#define MX_USB_OTG_HS_ULPI_D1_GPIOx GPIOB +#define MX_USB_OTG_HS_ULPI_D1_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_D1_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_D1_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_D1_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_D2 */ +#define MX_USB_OTG_HS_ULPI_D2_Pin PB1 +#define MX_USB_OTG_HS_ULPI_D2_GPIO_Pin GPIO_PIN_1 +#define MX_USB_OTG_HS_ULPI_D2_GPIOx GPIOB +#define MX_USB_OTG_HS_ULPI_D2_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_D2_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_D2_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_D2_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_D3 */ +#define MX_USB_OTG_HS_ULPI_D3_Pin PB10 +#define MX_USB_OTG_HS_ULPI_D3_GPIO_Pin GPIO_PIN_10 +#define MX_USB_OTG_HS_ULPI_D3_GPIOx GPIOB +#define MX_USB_OTG_HS_ULPI_D3_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_D3_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_D3_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_D3_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_D4 */ +#define MX_USB_OTG_HS_ULPI_D4_Pin PB11 +#define MX_USB_OTG_HS_ULPI_D4_GPIO_Pin GPIO_PIN_11 +#define MX_USB_OTG_HS_ULPI_D4_GPIOx GPIOB +#define MX_USB_OTG_HS_ULPI_D4_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_D4_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_D4_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_D4_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_D5 */ +#define MX_USB_OTG_HS_ULPI_D5_Pin PB12 +#define MX_USB_OTG_HS_ULPI_D5_GPIO_Pin GPIO_PIN_12 +#define MX_USB_OTG_HS_ULPI_D5_GPIOx GPIOB +#define MX_USB_OTG_HS_ULPI_D5_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_D5_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_D5_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_D5_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_D6 */ +#define MX_USB_OTG_HS_ULPI_D6_Pin PB13 +#define MX_USB_OTG_HS_ULPI_D6_GPIO_Pin GPIO_PIN_13 +#define MX_USB_OTG_HS_ULPI_D6_GPIOx GPIOB +#define MX_USB_OTG_HS_ULPI_D6_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_D6_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_D6_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_D6_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_D7 */ +#define MX_USB_OTG_HS_ULPI_D7_Pin PB5 +#define MX_USB_OTG_HS_ULPI_D7_GPIO_Pin GPIO_PIN_5 +#define MX_USB_OTG_HS_ULPI_D7_GPIOx GPIOB +#define MX_USB_OTG_HS_ULPI_D7_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_D7_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_D7_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_D7_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_DIR */ +#define MX_USB_OTG_HS_ULPI_DIR_Pin PI11 +#define MX_USB_OTG_HS_ULPI_DIR_GPIO_Pin GPIO_PIN_11 +#define MX_USB_OTG_HS_ULPI_DIR_GPIOx GPIOI +#define MX_USB_OTG_HS_ULPI_DIR_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_DIR_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_DIR_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_DIR_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_NXT */ +#define MX_USB_OTG_HS_ULPI_NXT_Pin PH4 +#define MX_USB_OTG_HS_ULPI_NXT_GPIO_Pin GPIO_PIN_4 +#define MX_USB_OTG_HS_ULPI_NXT_GPIOx GPIOH +#define MX_USB_OTG_HS_ULPI_NXT_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_NXT_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_NXT_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_NXT_GPIO_AF GPIO_AF10_OTG2_HS + +/* USB_OTG_HS_ULPI_STP */ +#define MX_USB_OTG_HS_ULPI_STP_Pin PC0 +#define MX_USB_OTG_HS_ULPI_STP_GPIO_Pin GPIO_PIN_0 +#define MX_USB_OTG_HS_ULPI_STP_GPIOx GPIOC +#define MX_USB_OTG_HS_ULPI_STP_GPIO_Mode GPIO_MODE_AF_PP +#define MX_USB_OTG_HS_ULPI_STP_GPIO_PuPd GPIO_NOPULL +#define MX_USB_OTG_HS_ULPI_STP_GPIO_Speed GPIO_SPEED_FREQ_HIGH +#define MX_USB_OTG_HS_ULPI_STP_GPIO_AF GPIO_AF10_OTG2_HS + +#endif /* MX_DEVICE_H__ */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/.mxproject b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/.mxproject new file mode 100644 index 0000000..53e3497 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/.mxproject @@ -0,0 +1,42 @@ +[CortexM7:PreviousGenFiles] +HeaderPath=..\CM7\Inc +HeaderFiles=stm32h7xx_it.h;stm32h7xx_hal_conf.h;main.h; +SourcePath=..\CM7\Src +SourceFiles=stm32h7xx_it.c;stm32h7xx_hal_msp.c;stm32h7xx_hal_timebase_tim.c;main.c; + +[CortexM7:PreviousLibFiles] +LibFiles=Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dfsdm.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dsi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_fmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_nor.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sdram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_ltdc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_ltdc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_qspi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_sdmmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_delayblock.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pcd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pcd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usb.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dfsdm.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dsi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_fmc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_nor.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sdram.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_qspi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_sdmmc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_delayblock.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_usb.c;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dfsdm.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dsi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_fmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_nor.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sdram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_ltdc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_ltdc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_qspi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_sdmmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_delayblock.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pcd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pcd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usb.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h747xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\system_stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[CortexM7:PreviousUsedKeilFiles] +SourceFiles=..\CM7\Src\main.c;..\CM7\Src\stm32h7xx_it.c;..\CM7\Src\stm32h7xx_hal_msp.c;..\CM7\Src\stm32h7xx_hal_timebase_tim.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dfsdm.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dsi.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_fmc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_nor.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sdram.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_qspi.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_sdmmc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_delayblock.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_usb.c;..\Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;;; +HeaderPath=..\Drivers\STM32H7xx_HAL_Driver\Inc;..\Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32H7xx\Include;..\Drivers\CMSIS\Include;..\CM7\Inc;..\Drivers\STM32H7xx_HAL_Driver\Inc;..\Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32H7xx\Include;..\Drivers\CMSIS\Include; +CDefines=CORE_CM7;USE_HAL_DRIVER;STM32H747xx;USE_HAL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[CortexM4:PreviousGenFiles] +HeaderPath=..\CM4\Inc +HeaderFiles=stm32h7xx_it.h;stm32h7xx_hal_conf.h;main.h; +SourcePath=..\CM4\Src +SourceFiles=stm32h7xx_it.c;stm32h7xx_hal_msp.c;main.c; + +[CortexM4:PreviousLibFiles] +LibFiles=Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dfsdm.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_fmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_nor.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sdram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_qspi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_sdmmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_delayblock.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dfsdm.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_fmc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_nor.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sdram.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_qspi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_sdmmc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_delayblock.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dfsdm.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_fmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_nor.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sdram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_qspi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_sdmmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_delayblock.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h747xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\system_stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[CortexM4:PreviousUsedKeilFiles] +SourceFiles=..\CM4\Src\main.c;..\CM4\Src\stm32h7xx_it.c;..\CM4\Src\stm32h7xx_hal_msp.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dfsdm.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_fmc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_nor.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sdram.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_qspi.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_sdmmc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_delayblock.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;;; +HeaderPath=..\Drivers\STM32H7xx_HAL_Driver\Inc;..\Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32H7xx\Include;..\Drivers\CMSIS\Include;..\CM4\Inc;..\Drivers\STM32H7xx_HAL_Driver\Inc;..\Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32H7xx\Include;..\Drivers\CMSIS\Include; +CDefines=CORE_CM4;USE_HAL_DRIVER;STM32H747xx;USE_HAL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousLibFiles] +LibFiles=Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dfsdm.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dsi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_fmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_nor.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sdram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_ltdc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_ltdc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_qspi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_sdmmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_delayblock.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pcd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pcd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usb.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dfsdm.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dsi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_fmc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_nor.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sdram.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_qspi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_sdmmc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_delayblock.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_usb.c;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dfsdm.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dsi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_fmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_nor.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sdram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_ltdc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_ltdc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_qspi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_sdmmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_delayblock.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pcd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pcd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usb.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dfsdm.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_fmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_nor.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sdram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_qspi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_sdmmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_delayblock.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dfsdm.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_fmc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_nor.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sdram.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_qspi.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_sdmmc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_delayblock.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dfsdm.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_eth_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_fmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_nor.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sdram.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_qspi.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sai_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_sdmmc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_delayblock.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_sd_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h747xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\system_stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\system_stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx_dualcore_boot_cm4_cm7.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[PreviousUsedKeilFiles] +SourceFiles=..\CM4\Src\main.c;..\CM7\Src\main.c;..\CM7\Src\stm32h7xx_it.c;..\CM7\Src\stm32h7xx_hal_msp.c;..\CM7\Src\stm32h7xx_hal_timebase_tim.c;..\CM4\Src\stm32h7xx_it.c;..\CM4\Src\stm32h7xx_hal_msp.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dfsdm.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dsi.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_fmc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_nor.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sdram.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_qspi.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_sdmmc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_delayblock.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_usb.c;..\Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx_dualcore_boot_cm4_cm7.c;..\Common\Src\system_stm32h7xx_dualcore_boot_cm4_cm7.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dfsdm.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dsi.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_eth_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_fmc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_nor.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sdram.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_ltdc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_qspi.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sai_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_sdmmc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_delayblock.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sd_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pcd_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_ll_usb.c;..\Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx_dualcore_boot_cm4_cm7.c;..\Common\Src\system_stm32h7xx_dualcore_boot_cm4_cm7.c;..\Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;..\Common\Src\system_stm32h7xx_dualcore_boot_cm4_cm7.c;..\Common\Src\system_stm32h7xx_dualcore_boot_cm4_cm7.c;;; +HeaderPath=..\Drivers\STM32H7xx_HAL_Driver\Inc;..\Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32H7xx\Include;..\Drivers\CMSIS\Include;..\CM7\Inc;..\CM4\Inc; +CDefines=CORE_CM4;CORE_CM7;CORE_CM7;USE_HAL_DRIVER;STM32H747xx;USE_HAL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER;CORE_CM4;CORE_CM4;USE_HAL_DRIVER;STM32H747xx;USE_HAL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +HeaderPath=..\CM7\Inc +HeaderFiles=stm32h7xx_it.h;stm32h7xx_hal_conf.h;main.h; +SourcePath=..\CM7\Src +SourceFiles=stm32h7xx_it.c;stm32h7xx_hal_msp.c;stm32h7xx_hal_timebase_tim.c;main.c; + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/main.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/main.h new file mode 100644 index 0000000..3432b34 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/main.h @@ -0,0 +1,293 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); +void MX_FMC_Init(void); +void MX_I2C1_Init(void); +void MX_QUADSPI_Init(void); +void MX_SAI1_Init(void); +void MX_SDMMC1_SD_Init(void); +void MX_USART1_UART_Init(void); + +/* USER CODE BEGIN EFP */ +extern int app_main (void); +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define D28_Pin GPIO_PIN_6 +#define D28_GPIO_Port GPIOI +#define FMC_NBL3_Pin GPIO_PIN_5 +#define FMC_NBL3_GPIO_Port GPIOI +#define FMC_NBL2_Pin GPIO_PIN_4 +#define FMC_NBL2_GPIO_Port GPIOI +#define FMC_NE3_Pin GPIO_PIN_10 +#define FMC_NE3_GPIO_Port GPIOG +#define QSPI_BK2_IO2_Pin GPIO_PIN_9 +#define QSPI_BK2_IO2_GPIO_Port GPIOG +#define FMC_NWE_Pin GPIO_PIN_5 +#define FMC_NWE_GPIO_Port GPIOD +#define FMC_NOE_Pin GPIO_PIN_4 +#define FMC_NOE_GPIO_Port GPIOD +#define SDIO1_D2_Pin GPIO_PIN_10 +#define SDIO1_D2_GPIO_Port GPIOC +#define D25_Pin GPIO_PIN_1 +#define D25_GPIO_Port GPIOI +#define D24_Pin GPIO_PIN_0 +#define D24_GPIO_Port GPIOI +#define D29_Pin GPIO_PIN_7 +#define D29_GPIO_Port GPIOI +#define FMC_NBL1_Pin GPIO_PIN_1 +#define FMC_NBL1_GPIO_Port GPIOE +#define I2C1_SCL_Pin GPIO_PIN_6 +#define I2C1_SCL_GPIO_Port GPIOB +#define RMII_TX_EN_Pin GPIO_PIN_11 +#define RMII_TX_EN_GPIO_Port GPIOG +#define FMC_NWAIT_Pin GPIO_PIN_6 +#define FMC_NWAIT_GPIO_Port GPIOD +#define SDIO1_D3_Pin GPIO_PIN_11 +#define SDIO1_D3_GPIO_Port GPIOC +#define D26_Pin GPIO_PIN_2 +#define D26_GPIO_Port GPIOI +#define D23_Pin GPIO_PIN_15 +#define D23_GPIO_Port GPIOH +#define D22_Pin GPIO_PIN_14 +#define D22_GPIO_Port GPIOH +#define OSC32_OUT_Pin GPIO_PIN_15 +#define OSC32_OUT_GPIO_Port GPIOC +#define OSC32_IN_Pin GPIO_PIN_14 +#define OSC32_IN_GPIO_Port GPIOC +#define FMC_NBL0_Pin GPIO_PIN_0 +#define FMC_NBL0_GPIO_Port GPIOE +#define I2C1_SDA_Pin GPIO_PIN_7 +#define I2C1_SDA_GPIO_Port GPIOB +#define RMII_TXD1_Pin GPIO_PIN_12 +#define RMII_TXD1_GPIO_Port GPIOG +#define FMC_NE1_Pin GPIO_PIN_7 +#define FMC_NE1_GPIO_Port GPIOD +#define SDIO1_CLK_Pin GPIO_PIN_12 +#define SDIO1_CLK_GPIO_Port GPIOC +#define D27__IS42S32800G_DQ27_Pin GPIO_PIN_3 +#define D27__IS42S32800G_DQ27_GPIO_Port GPIOI +#define SAI1_SCKA_Pin GPIO_PIN_5 +#define SAI1_SCKA_GPIO_Port GPIOE +#define SAI1_FSA_Pin GPIO_PIN_4 +#define SAI1_FSA_GPIO_Port GPIOE +#define SAI1_SDB_Pin GPIO_PIN_3 +#define SAI1_SDB_GPIO_Port GPIOE +#define SDIO1_CDIR_Pin GPIO_PIN_9 +#define SDIO1_CDIR_GPIO_Port GPIOB +#define SDIO1_CKIN_Pin GPIO_PIN_8 +#define SDIO1_CKIN_GPIO_Port GPIOB +#define SDNCAS_Pin GPIO_PIN_15 +#define SDNCAS_GPIO_Port GPIOG +#define QSPI_BK2_IO3_Pin GPIO_PIN_14 +#define QSPI_BK2_IO3_GPIO_Port GPIOG +#define RMII_TXD0_Pin GPIO_PIN_13 +#define RMII_TXD0_GPIO_Port GPIOG +#define SDIO1_CMD_Pin GPIO_PIN_2 +#define SDIO1_CMD_GPIO_Port GPIOD +#define D2_Pin GPIO_PIN_0 +#define D2_GPIO_Port GPIOD +#define D21_Pin GPIO_PIN_13 +#define D21_GPIO_Port GPIOH +#define D30_Pin GPIO_PIN_9 +#define D30_GPIO_Port GPIOI +#define SAI1_SDA_Pin GPIO_PIN_6 +#define SAI1_SDA_GPIO_Port GPIOE +#define D3_Pin GPIO_PIN_1 +#define D3_GPIO_Port GPIOD +#define SDIO1_D0_Pin GPIO_PIN_8 +#define SDIO1_D0_GPIO_Port GPIOC +#define SDIO1_D1_Pin GPIO_PIN_9 +#define SDIO1_D1_GPIO_Port GPIOC +#define MCO1_Pin GPIO_PIN_8 +#define MCO1_GPIO_Port GPIOA +#define D31_Pin GPIO_PIN_10 +#define D31_GPIO_Port GPIOI +#define SDIO1_D123DIR_Pin GPIO_PIN_7 +#define SDIO1_D123DIR_GPIO_Port GPIOC +#define SDIO1_D0DIR_Pin GPIO_PIN_6 +#define SDIO1_D0DIR_GPIO_Port GPIOC +#define SDCLK_Pin GPIO_PIN_8 +#define SDCLK_GPIO_Port GPIOG +#define SAI1_MCLKA_Pin GPIO_PIN_7 +#define SAI1_MCLKA_GPIO_Port GPIOG +#define A2_Pin GPIO_PIN_2 +#define A2_GPIO_Port GPIOF +#define A1_Pin GPIO_PIN_1 +#define A1_GPIO_Port GPIOF +#define A0_Pin GPIO_PIN_0 +#define A0_GPIO_Port GPIOF +#define QSPI_BK1_NCS_Pin GPIO_PIN_6 +#define QSPI_BK1_NCS_GPIO_Port GPIOG +#define A3_Pin GPIO_PIN_3 +#define A3_GPIO_Port GPIOF +#define A13_Pin GPIO_PIN_3 +#define A13_GPIO_Port GPIOG +#define A12_Pin GPIO_PIN_2 +#define A12_GPIO_Port GPIOG +#define OSC_OUT_Pin GPIO_PIN_1 +#define OSC_OUT_GPIO_Port GPIOH +#define OSC_IN_Pin GPIO_PIN_0 +#define OSC_IN_GPIO_Port GPIOH +#define A5_Pin GPIO_PIN_5 +#define A5_GPIO_Port GPIOF +#define A4_Pin GPIO_PIN_4 +#define A4_GPIO_Port GPIOF +#define QSPI_BK1_IO3_Pin GPIO_PIN_6 +#define QSPI_BK1_IO3_GPIO_Port GPIOF +#define QSPI_BK1_IO2_Pin GPIO_PIN_7 +#define QSPI_BK1_IO2_GPIO_Port GPIOF +#define QSPI_BK1_IO0_Pin GPIO_PIN_8 +#define QSPI_BK1_IO0_GPIO_Port GPIOF +#define QSPI_BK1_IO1_Pin GPIO_PIN_9 +#define QSPI_BK1_IO1_GPIO_Port GPIOF +#define RMII_MDC_Pin GPIO_PIN_1 +#define RMII_MDC_GPIO_Port GPIOC +#define DFSDM_CLK_Pin GPIO_PIN_2 +#define DFSDM_CLK_GPIO_Port GPIOC +#define DFSM_DAT1_Pin GPIO_PIN_3 +#define DFSM_DAT1_GPIO_Port GPIOC +#define QSPI_BK2_IO0_Pin GPIO_PIN_2 +#define QSPI_BK2_IO0_GPIO_Port GPIOH +#define RMII_MDIO_Pin GPIO_PIN_2 +#define RMII_MDIO_GPIO_Port GPIOA +#define RMII_REF_CLK_Pin GPIO_PIN_1 +#define RMII_REF_CLK_GPIO_Port GPIOA +#define D7_Pin GPIO_PIN_10 +#define D7_GPIO_Port GPIOE +#define QSPI_BK2_IO1_Pin GPIO_PIN_3 +#define QSPI_BK2_IO1_GPIO_Port GPIOH +#define SDNWE_Pin GPIO_PIN_5 +#define SDNWE_GPIO_Port GPIOH +#define A7_Pin GPIO_PIN_13 +#define A7_GPIO_Port GPIOF +#define A8_Pin GPIO_PIN_14 +#define A8_GPIO_Port GPIOF +#define D6_Pin GPIO_PIN_9 +#define D6_GPIO_Port GPIOE +#define D8_Pin GPIO_PIN_11 +#define D8_GPIO_Port GPIOE +#define D18_Pin GPIO_PIN_10 +#define D18_GPIO_Port GPIOH +#define D19_Pin GPIO_PIN_11 +#define D19_GPIO_Port GPIOH +#define D1_Pin GPIO_PIN_15 +#define D1_GPIO_Port GPIOD +#define D0_Pin GPIO_PIN_14 +#define D0_GPIO_Port GPIOD +#define RMII_CRS_DV_Pin GPIO_PIN_7 +#define RMII_CRS_DV_GPIO_Port GPIOA +#define QSPI_CLK_Pin GPIO_PIN_2 +#define QSPI_CLK_GPIO_Port GPIOB +#define A6_Pin GPIO_PIN_12 +#define A6_GPIO_Port GPIOF +#define A9_Pin GPIO_PIN_15 +#define A9_GPIO_Port GPIOF +#define D9_Pin GPIO_PIN_12 +#define D9_GPIO_Port GPIOE +#define D12_Pin GPIO_PIN_15 +#define D12_GPIO_Port GPIOE +#define D17_Pin GPIO_PIN_9 +#define D17_GPIO_Port GPIOH +#define D20_Pin GPIO_PIN_12 +#define D20_GPIO_Port GPIOH +#define A16_Pin GPIO_PIN_11 +#define A16_GPIO_Port GPIOD +#define A17_Pin GPIO_PIN_12 +#define A17_GPIO_Port GPIOD +#define A18_Pin GPIO_PIN_13 +#define A18_GPIO_Port GPIOD +#define RMII_RXD0_Pin GPIO_PIN_4 +#define RMII_RXD0_GPIO_Port GPIOC +#define SNDRAS_Pin GPIO_PIN_11 +#define SNDRAS_GPIO_Port GPIOF +#define A10_Pin GPIO_PIN_0 +#define A10_GPIO_Port GPIOG +#define D5_Pin GPIO_PIN_8 +#define D5_GPIO_Port GPIOE +#define D10_Pin GPIO_PIN_13 +#define D10_GPIO_Port GPIOE +#define SDNE1_Pin GPIO_PIN_6 +#define SDNE1_GPIO_Port GPIOH +#define D16_Pin GPIO_PIN_8 +#define D16_GPIO_Port GPIOH +#define RS_232RX_Pin GPIO_PIN_15 +#define RS_232RX_GPIO_Port GPIOB +#define D15_Pin GPIO_PIN_10 +#define D15_GPIO_Port GPIOD +#define D14_Pin GPIO_PIN_9 +#define D14_GPIO_Port GPIOD +#define RMII_RXD1_Pin GPIO_PIN_5 +#define RMII_RXD1_GPIO_Port GPIOC +#define A11_Pin GPIO_PIN_1 +#define A11_GPIO_Port GPIOG +#define D4_Pin GPIO_PIN_7 +#define D4_GPIO_Port GPIOE +#define D11_Pin GPIO_PIN_14 +#define D11_GPIO_Port GPIOE +#define SDCKE1_Pin GPIO_PIN_7 +#define SDCKE1_GPIO_Port GPIOH +#define RS232_TX_Pin GPIO_PIN_14 +#define RS232_TX_GPIO_Port GPIOB +#define D13_Pin GPIO_PIN_8 +#define D13_GPIO_Port GPIOD + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/stm32h7xx_hal_conf.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/stm32h7xx_hal_conf.h new file mode 100644 index 0000000..d56006d --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/stm32h7xx_hal_conf.h @@ -0,0 +1,515 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_CONF_H +#define STM32H7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + + /* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +/* #define HAL_FMAC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CORDIC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +#define HAL_ETH_MODULE_ENABLED +/* #define HAL_ETH_LEGACY_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +#define HAL_NOR_MODULE_ENABLED +/* #define HAL_OTFDEC_MODULE_ENABLED */ +#define HAL_SRAM_MODULE_ENABLED +#define HAL_SDRAM_MODULE_ENABLED +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_HSEM_MODULE_ENABLED */ +/* #define HAL_GFXMMU_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_OSPI_MODULE_ENABLED */ +/* #define HAL_XSPI_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_QSPI_MODULE_ENABLED +/* #define HAL_RAMECC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +#define HAL_SAI_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +#define HAL_DFSDM_MODULE_ENABLED +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ +/* #define HAL_PSSI_MODULE_ENABLED */ +/* #define HAL_DTS_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_MDMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_HSEM_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (25000000UL) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal oscillator (CSI) default value. + * This value is the default CSI value after Reset. + */ +#if !defined (CSI_VALUE) + #define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ +#define USE_SPI_CRC 0U /*!< use CRC in SPI */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */ +#define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################### Ethernet Configuration ######################### */ +#define ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */ + +#define ETH_MAC_ADDR0 (0x02UL) +#define ETH_MAC_ADDR1 (0x00UL) +#define ETH_MAC_ADDR2 (0x00UL) +#define ETH_MAC_ADDR3 (0x00UL) +#define ETH_MAC_ADDR4 (0x00UL) +#define ETH_MAC_ADDR5 (0x00UL) + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_MDMA_MODULE_ENABLED + #include "stm32h7xx_hal_mdma.h" +#endif /* HAL_MDMA_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32h7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32h7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32h7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DTS_MODULE_ENABLED + #include "stm32h7xx_hal_dts.h" +#endif /* HAL_DTS_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_ETH_LEGACY_MODULE_ENABLED + #include "stm32h7xx_hal_eth_legacy.h" +#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32h7xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32h7xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORDIC_MODULE_ENABLED + #include "stm32h7xx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32h7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32h7xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_FMAC_MODULE_ENABLED + #include "stm32h7xx_hal_fmac.h" +#endif /* HAL_FMAC_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32h7xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32h7xx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32h7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32h7xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32h7xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_OTFDEC_MODULE_ENABLED +#include "stm32h7xx_hal_otfdec.h" +#endif /* HAL_OTFDEC_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED + #include "stm32h7xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32h7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + #include "stm32h7xx_hal_ramecc.h" +#endif /* HAL_RAMECC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32h7xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_CONF_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/stm32h7xx_it.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/stm32h7xx_it.h new file mode 100644 index 0000000..303bf58 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Inc/stm32h7xx_it.h @@ -0,0 +1,66 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_IT_H +#define __STM32H7xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_IT_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/main.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/main.c new file mode 100644 index 0000000..1279414 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/main.c @@ -0,0 +1,648 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "string.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +#ifndef HSEM_ID_0 +#define HSEM_ID_0 (0U) /* HW semaphore 0*/ +#endif + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ +#pragma location=0x30000000 +ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */ +#pragma location=0x30000080 +ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */ + +#elif defined ( __CC_ARM ) /* MDK ARM Compiler */ + +__attribute__((at(0x30000000))) ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */ +__attribute__((at(0x30000080))) ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */ + +#elif defined ( __GNUC__ ) /* GNU Compiler */ + +ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((section(".RxDecripSection"))); /* Ethernet Rx DMA Descriptors */ +ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((section(".TxDecripSection"))); /* Ethernet Tx DMA Descriptors */ +#endif + +ETH_TxPacketConfig TxConfig; + +DFSDM_Channel_HandleTypeDef hdfsdm1_channel1; + +ETH_HandleTypeDef heth; + +I2C_HandleTypeDef hi2c1; + +QSPI_HandleTypeDef hqspi; + +SAI_HandleTypeDef hsai_BlockB1; +SAI_HandleTypeDef hsai_BlockA1; + +SD_HandleTypeDef hsd1; + +UART_HandleTypeDef huart1; + +NOR_HandleTypeDef hnor1; +SRAM_HandleTypeDef hsram2; +SDRAM_HandleTypeDef hsdram1; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +static void MX_GPIO_Init(void); +static void MX_DFSDM1_Init(void); +static void MX_ETH_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + +/* USER CODE BEGIN Boot_Mode_Sequence_1 */ + /*HW semaphore Clock enable*/ + __HAL_RCC_HSEM_CLK_ENABLE(); + /* Activate HSEM notification for Cortex-M4*/ + HAL_HSEM_ActivateNotification(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0)); + /* + Domain D2 goes to STOP mode (Cortex-M4 in deep-sleep) waiting for Cortex-M7 to + perform system initialization (system clock config, external memory configuration.. ) + */ + HAL_PWREx_ClearPendingEvent(); + HAL_PWREx_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_STOPENTRY_WFE, PWR_D2_DOMAIN); + /* Clear HSEM flag */ + __HAL_HSEM_CLEAR_FLAG(__HAL_HSEM_SEMID_TO_MASK(HSEM_ID_0)); + +/* USER CODE END Boot_Mode_Sequence_1 */ + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_DFSDM1_Init(); + MX_ETH_Init(); + /* USER CODE BEGIN 2 */ + + app_main(); /* Execute Application main */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief DFSDM1 Initialization Function + * @param None + * @retval None + */ +static void MX_DFSDM1_Init(void) +{ + + /* USER CODE BEGIN DFSDM1_Init 0 */ + + /* USER CODE END DFSDM1_Init 0 */ + + /* USER CODE BEGIN DFSDM1_Init 1 */ + + /* USER CODE END DFSDM1_Init 1 */ + hdfsdm1_channel1.Instance = DFSDM1_Channel1; + hdfsdm1_channel1.Init.OutputClock.Activation = ENABLE; + hdfsdm1_channel1.Init.OutputClock.Selection = DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM; + hdfsdm1_channel1.Init.OutputClock.Divider = 2; + hdfsdm1_channel1.Init.Input.Multiplexer = DFSDM_CHANNEL_EXTERNAL_INPUTS; + hdfsdm1_channel1.Init.Input.DataPacking = DFSDM_CHANNEL_STANDARD_MODE; + hdfsdm1_channel1.Init.Input.Pins = DFSDM_CHANNEL_SAME_CHANNEL_PINS; + hdfsdm1_channel1.Init.SerialInterface.Type = DFSDM_CHANNEL_SPI_RISING; + hdfsdm1_channel1.Init.SerialInterface.SpiClock = DFSDM_CHANNEL_SPI_CLOCK_INTERNAL; + hdfsdm1_channel1.Init.Awd.FilterOrder = DFSDM_CHANNEL_FASTSINC_ORDER; + hdfsdm1_channel1.Init.Awd.Oversampling = 1; + hdfsdm1_channel1.Init.Offset = 0; + hdfsdm1_channel1.Init.RightBitShift = 0x00; + if (HAL_DFSDM_ChannelInit(&hdfsdm1_channel1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN DFSDM1_Init 2 */ + + /* USER CODE END DFSDM1_Init 2 */ + +} + +/** + * @brief ETH Initialization Function + * @param None + * @retval None + */ +static void MX_ETH_Init(void) +{ + + /* USER CODE BEGIN ETH_Init 0 */ + + /* USER CODE END ETH_Init 0 */ + + static uint8_t MACAddr[6]; + + /* USER CODE BEGIN ETH_Init 1 */ + + /* USER CODE END ETH_Init 1 */ + heth.Instance = ETH; + MACAddr[0] = 0x00; + MACAddr[1] = 0x80; + MACAddr[2] = 0xE1; + MACAddr[3] = 0x00; + MACAddr[4] = 0x00; + MACAddr[5] = 0x00; + heth.Init.MACAddr = &MACAddr[0]; + heth.Init.MediaInterface = HAL_ETH_RMII_MODE; + heth.Init.TxDesc = DMATxDscrTab; + heth.Init.RxDesc = DMARxDscrTab; + heth.Init.RxBuffLen = 1524; + + /* USER CODE BEGIN MACADDRESS */ + + /* USER CODE END MACADDRESS */ + + if (HAL_ETH_Init(&heth) != HAL_OK) + { + Error_Handler(); + } + + memset(&TxConfig, 0 , sizeof(ETH_TxPacketConfig)); + TxConfig.Attributes = ETH_TX_PACKETS_FEATURES_CSUM | ETH_TX_PACKETS_FEATURES_CRCPAD; + TxConfig.ChecksumCtrl = ETH_CHECKSUM_IPHDR_PAYLOAD_INSERT_PHDR_CALC; + TxConfig.CRCPadCtrl = ETH_CRC_PAD_INSERT; + /* USER CODE BEGIN ETH_Init 2 */ + + /* USER CODE END ETH_Init 2 */ + +} + +/** + * @brief I2C1 Initialization Function + * @param None + * @retval None + */ +void MX_I2C1_Init(void) +{ + + /* USER CODE BEGIN I2C1_Init 0 */ + + /* USER CODE END I2C1_Init 0 */ + + /* USER CODE BEGIN I2C1_Init 1 */ + + /* USER CODE END I2C1_Init 1 */ + hi2c1.Instance = I2C1; + hi2c1.Init.Timing = 0x109093DC; + hi2c1.Init.OwnAddress1 = 0; + hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + hi2c1.Init.OwnAddress2 = 0; + hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK; + hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + if (HAL_I2C_Init(&hi2c1) != HAL_OK) + { + Error_Handler(); + } + + /** Configure Analogue filter + */ + if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK) + { + Error_Handler(); + } + + /** Configure Digital filter + */ + if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN I2C1_Init 2 */ + + /* USER CODE END I2C1_Init 2 */ + +} + +/** + * @brief QUADSPI Initialization Function + * @param None + * @retval None + */ +void MX_QUADSPI_Init(void) +{ + + /* USER CODE BEGIN QUADSPI_Init 0 */ + + /* USER CODE END QUADSPI_Init 0 */ + + /* USER CODE BEGIN QUADSPI_Init 1 */ + + /* USER CODE END QUADSPI_Init 1 */ + /* QUADSPI parameter configuration*/ + hqspi.Instance = QUADSPI; + hqspi.Init.ClockPrescaler = 255; + hqspi.Init.FifoThreshold = 1; + hqspi.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_NONE; + hqspi.Init.FlashSize = 1; + hqspi.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_1_CYCLE; + hqspi.Init.ClockMode = QSPI_CLOCK_MODE_0; + hqspi.Init.DualFlash = QSPI_DUALFLASH_ENABLE; + if (HAL_QSPI_Init(&hqspi) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN QUADSPI_Init 2 */ + + /* USER CODE END QUADSPI_Init 2 */ + +} + +/** + * @brief SAI1 Initialization Function + * @param None + * @retval None + */ +void MX_SAI1_Init(void) +{ + + /* USER CODE BEGIN SAI1_Init 0 */ + + /* USER CODE END SAI1_Init 0 */ + + /* USER CODE BEGIN SAI1_Init 1 */ + + /* USER CODE END SAI1_Init 1 */ + hsai_BlockB1.Instance = SAI1_Block_B; + hsai_BlockB1.Init.Protocol = SAI_FREE_PROTOCOL; + hsai_BlockB1.Init.AudioMode = SAI_MODESLAVE_RX; + hsai_BlockB1.Init.DataSize = SAI_DATASIZE_8; + hsai_BlockB1.Init.FirstBit = SAI_FIRSTBIT_MSB; + hsai_BlockB1.Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE; + hsai_BlockB1.Init.Synchro = SAI_SYNCHRONOUS; + hsai_BlockB1.Init.OutputDrive = SAI_OUTPUTDRIVE_DISABLE; + hsai_BlockB1.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_EMPTY; + hsai_BlockB1.Init.SynchroExt = SAI_SYNCEXT_DISABLE; + hsai_BlockB1.Init.MonoStereoMode = SAI_STEREOMODE; + hsai_BlockB1.Init.CompandingMode = SAI_NOCOMPANDING; + hsai_BlockB1.Init.TriState = SAI_OUTPUT_NOTRELEASED; + hsai_BlockB1.Init.PdmInit.Activation = DISABLE; + hsai_BlockB1.Init.PdmInit.MicPairsNbr = 1; + hsai_BlockB1.Init.PdmInit.ClockEnable = SAI_PDM_CLOCK1_ENABLE; + hsai_BlockB1.FrameInit.FrameLength = 8; + hsai_BlockB1.FrameInit.ActiveFrameLength = 1; + hsai_BlockB1.FrameInit.FSDefinition = SAI_FS_STARTFRAME; + hsai_BlockB1.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW; + hsai_BlockB1.FrameInit.FSOffset = SAI_FS_FIRSTBIT; + hsai_BlockB1.SlotInit.FirstBitOffset = 0; + hsai_BlockB1.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE; + hsai_BlockB1.SlotInit.SlotNumber = 1; + hsai_BlockB1.SlotInit.SlotActive = 0x00000000; + if (HAL_SAI_Init(&hsai_BlockB1) != HAL_OK) + { + Error_Handler(); + } + hsai_BlockA1.Instance = SAI1_Block_A; + hsai_BlockA1.Init.AudioMode = SAI_MODEMASTER_TX; + hsai_BlockA1.Init.Synchro = SAI_ASYNCHRONOUS; + hsai_BlockA1.Init.OutputDrive = SAI_OUTPUTDRIVE_DISABLE; + hsai_BlockA1.Init.NoDivider = SAI_MASTERDIVIDER_ENABLE; + hsai_BlockA1.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_EMPTY; + hsai_BlockA1.Init.AudioFrequency = SAI_AUDIO_FREQUENCY_192K; + hsai_BlockA1.Init.SynchroExt = SAI_SYNCEXT_DISABLE; + hsai_BlockA1.Init.MonoStereoMode = SAI_STEREOMODE; + hsai_BlockA1.Init.CompandingMode = SAI_NOCOMPANDING; + hsai_BlockA1.Init.TriState = SAI_OUTPUT_NOTRELEASED; + if (HAL_SAI_InitProtocol(&hsai_BlockA1, SAI_I2S_STANDARD, SAI_PROTOCOL_DATASIZE_16BIT, 2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SAI1_Init 2 */ + + /* USER CODE END SAI1_Init 2 */ + +} + +/** + * @brief SDMMC1 Initialization Function + * @param None + * @retval None + */ +void MX_SDMMC1_SD_Init(void) +{ + + /* USER CODE BEGIN SDMMC1_Init 0 */ + + /* USER CODE END SDMMC1_Init 0 */ + + /* USER CODE BEGIN SDMMC1_Init 1 */ + + /* USER CODE END SDMMC1_Init 1 */ + hsd1.Instance = SDMMC1; + hsd1.Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING; + hsd1.Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE; + hsd1.Init.BusWide = SDMMC_BUS_WIDE_4B; + hsd1.Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE; + hsd1.Init.ClockDiv = 0; + hsd1.Init.TranceiverPresent = SDMMC_TRANSCEIVER_PRESENT; + if (HAL_SD_Init(&hsd1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SDMMC1_Init 2 */ + + /* USER CODE END SDMMC1_Init 2 */ + +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 115200; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ + +} + +/* FMC initialization function */ +void MX_FMC_Init(void) +{ + + /* USER CODE BEGIN FMC_Init 0 */ + + /* USER CODE END FMC_Init 0 */ + + FMC_NORSRAM_TimingTypeDef Timing = {0}; + FMC_SDRAM_TimingTypeDef SdramTiming = {0}; + + /* USER CODE BEGIN FMC_Init 1 */ + + /* USER CODE END FMC_Init 1 */ + + /** Perform the NOR1 memory initialization sequence + */ + hnor1.Instance = FMC_NORSRAM_DEVICE; + hnor1.Extended = FMC_NORSRAM_EXTENDED_DEVICE; + /* hnor1.Init */ + hnor1.Init.NSBank = FMC_NORSRAM_BANK1; + hnor1.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE; + hnor1.Init.MemoryType = FMC_MEMORY_TYPE_NOR; + hnor1.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_16; + hnor1.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_DISABLE; + hnor1.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_LOW; + hnor1.Init.WaitSignalActive = FMC_WAIT_TIMING_BEFORE_WS; + hnor1.Init.WriteOperation = FMC_WRITE_OPERATION_DISABLE; + hnor1.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE; + hnor1.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE; + hnor1.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_ENABLE; + hnor1.Init.WriteBurst = FMC_WRITE_BURST_DISABLE; + hnor1.Init.ContinuousClock = FMC_CONTINUOUS_CLOCK_SYNC_ONLY; + hnor1.Init.WriteFifo = FMC_WRITE_FIFO_ENABLE; + hnor1.Init.PageSize = FMC_PAGE_SIZE_NONE; + /* Timing */ + Timing.AddressSetupTime = 15; + Timing.AddressHoldTime = 15; + Timing.DataSetupTime = 255; + Timing.BusTurnAroundDuration = 15; + Timing.CLKDivision = 16; + Timing.DataLatency = 17; + Timing.AccessMode = FMC_ACCESS_MODE_A; + /* ExtTiming */ + + if (HAL_NOR_Init(&hnor1, &Timing, NULL) != HAL_OK) + { + Error_Handler( ); + } + + /** Perform the SRAM2 memory initialization sequence + */ + hsram2.Instance = FMC_NORSRAM_DEVICE; + hsram2.Extended = FMC_NORSRAM_EXTENDED_DEVICE; + /* hsram2.Init */ + hsram2.Init.NSBank = FMC_NORSRAM_BANK3; + hsram2.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE; + hsram2.Init.MemoryType = FMC_MEMORY_TYPE_SRAM; + hsram2.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_16; + hsram2.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_DISABLE; + hsram2.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_LOW; + hsram2.Init.WaitSignalActive = FMC_WAIT_TIMING_BEFORE_WS; + hsram2.Init.WriteOperation = FMC_WRITE_OPERATION_DISABLE; + hsram2.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE; + hsram2.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE; + hsram2.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_ENABLE; + hsram2.Init.WriteBurst = FMC_WRITE_BURST_DISABLE; + hsram2.Init.ContinuousClock = FMC_CONTINUOUS_CLOCK_SYNC_ONLY; + hsram2.Init.WriteFifo = FMC_WRITE_FIFO_ENABLE; + hsram2.Init.PageSize = FMC_PAGE_SIZE_NONE; + /* Timing */ + Timing.AddressSetupTime = 15; + Timing.AddressHoldTime = 15; + Timing.DataSetupTime = 255; + Timing.BusTurnAroundDuration = 15; + Timing.CLKDivision = 16; + Timing.DataLatency = 17; + Timing.AccessMode = FMC_ACCESS_MODE_A; + /* ExtTiming */ + + if (HAL_SRAM_Init(&hsram2, &Timing, NULL) != HAL_OK) + { + Error_Handler( ); + } + + /** Perform the SDRAM1 memory initialization sequence + */ + hsdram1.Instance = FMC_SDRAM_DEVICE; + /* hsdram1.Init */ + hsdram1.Init.SDBank = FMC_SDRAM_BANK2; + hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8; + hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_11; + hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_32; + hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4; + hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_1; + hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE; + hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_DISABLE; + hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_DISABLE; + hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0; + /* SdramTiming */ + SdramTiming.LoadToActiveDelay = 16; + SdramTiming.ExitSelfRefreshDelay = 16; + SdramTiming.SelfRefreshTime = 16; + SdramTiming.RowCycleDelay = 16; + SdramTiming.WriteRecoveryTime = 16; + SdramTiming.RPDelay = 16; + SdramTiming.RCDDelay = 16; + + if (HAL_SDRAM_Init(&hsdram1, &SdramTiming) != HAL_OK) + { + Error_Handler( ); + } + + /* USER CODE BEGIN FMC_Init 2 */ + + /* USER CODE END FMC_Init 2 */ +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ +/* USER CODE BEGIN MX_GPIO_Init_1 */ +/* USER CODE END MX_GPIO_Init_1 */ + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + +/* USER CODE BEGIN MX_GPIO_Init_2 */ +/* USER CODE END MX_GPIO_Init_2 */ +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/stm32h7xx_hal_msp.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/stm32h7xx_hal_msp.c new file mode 100644 index 0000000..ccfc968 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/stm32h7xx_hal_msp.c @@ -0,0 +1,614 @@ + +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +static uint32_t DFSDM1_Init = 0; +/** +* @brief DFSDM_Channel MSP Initialization +* This function configures the hardware resources used in this example +* @param hdfsdm_channel: DFSDM_Channel handle pointer +* @retval None +*/ +void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef* hdfsdm_channel) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(DFSDM1_Init == 0) + { + /* USER CODE BEGIN DFSDM1_MspInit 0 */ + + /* USER CODE END DFSDM1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_DFSDM1; + PeriphClkInitStruct.Dfsdm1ClockSelection = RCC_DFSDM1CLKSOURCE_D2PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_DFSDM1_CLK_ENABLE(); + + __HAL_RCC_GPIOC_CLK_ENABLE(); + /**DFSDM1 GPIO Configuration + PC2 ------> DFSDM1_CKOUT + PC3 ------> DFSDM1_DATIN1 + */ + GPIO_InitStruct.Pin = DFSDM_CLK_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF6_DFSDM1; + HAL_GPIO_Init(DFSDM_CLK_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = DFSM_DAT1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF3_DFSDM1; + HAL_GPIO_Init(DFSM_DAT1_GPIO_Port, &GPIO_InitStruct); + + /* USER CODE BEGIN DFSDM1_MspInit 1 */ + + /* USER CODE END DFSDM1_MspInit 1 */ + + DFSDM1_Init++; + } + +} + +/** +* @brief DFSDM_Channel MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hdfsdm_channel: DFSDM_Channel handle pointer +* @retval None +*/ +void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef* hdfsdm_channel) +{ + DFSDM1_Init-- ; + if(DFSDM1_Init == 0) + { + /* USER CODE BEGIN DFSDM1_MspDeInit 0 */ + + /* USER CODE END DFSDM1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_DFSDM1_CLK_DISABLE(); + + /**DFSDM1 GPIO Configuration + PC2 ------> DFSDM1_CKOUT + PC3 ------> DFSDM1_DATIN1 + */ + HAL_GPIO_DeInit(GPIOC, DFSDM_CLK_Pin|DFSM_DAT1_Pin); + + /* USER CODE BEGIN DFSDM1_MspDeInit 1 */ + + /* USER CODE END DFSDM1_MspDeInit 1 */ + } + +} + +/** +* @brief ETH MSP Initialization +* This function configures the hardware resources used in this example +* @param heth: ETH handle pointer +* @retval None +*/ +void HAL_ETH_MspInit(ETH_HandleTypeDef* heth) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(heth->Instance==ETH) + { + /* USER CODE BEGIN ETH_MspInit 0 */ + + /* USER CODE END ETH_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_ETH1MAC_CLK_ENABLE(); + __HAL_RCC_ETH1TX_CLK_ENABLE(); + __HAL_RCC_ETH1RX_CLK_ENABLE(); + + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**ETH GPIO Configuration + PG11 ------> ETH_TX_EN + PG12 ------> ETH_TXD1 + PG13 ------> ETH_TXD0 + PC1 ------> ETH_MDC + PA2 ------> ETH_MDIO + PA1 ------> ETH_REF_CLK + PA7 ------> ETH_CRS_DV + PC4 ------> ETH_RXD0 + PC5 ------> ETH_RXD1 + */ + GPIO_InitStruct.Pin = RMII_TX_EN_Pin|RMII_TXD1_Pin|RMII_TXD0_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF11_ETH; + HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF11_ETH; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = RMII_MDIO_Pin|RMII_REF_CLK_Pin|RMII_CRS_DV_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF11_ETH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN ETH_MspInit 1 */ + + /* USER CODE END ETH_MspInit 1 */ + + } + +} + +/** +* @brief ETH MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param heth: ETH handle pointer +* @retval None +*/ +void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth) +{ + if(heth->Instance==ETH) + { + /* USER CODE BEGIN ETH_MspDeInit 0 */ + + /* USER CODE END ETH_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_ETH1MAC_CLK_DISABLE(); + __HAL_RCC_ETH1TX_CLK_DISABLE(); + __HAL_RCC_ETH1RX_CLK_DISABLE(); + + /**ETH GPIO Configuration + PG11 ------> ETH_TX_EN + PG12 ------> ETH_TXD1 + PG13 ------> ETH_TXD0 + PC1 ------> ETH_MDC + PA2 ------> ETH_MDIO + PA1 ------> ETH_REF_CLK + PA7 ------> ETH_CRS_DV + PC4 ------> ETH_RXD0 + PC5 ------> ETH_RXD1 + */ + HAL_GPIO_DeInit(GPIOG, RMII_TX_EN_Pin|RMII_TXD1_Pin|RMII_TXD0_Pin); + + HAL_GPIO_DeInit(GPIOC, RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin); + + HAL_GPIO_DeInit(GPIOA, RMII_MDIO_Pin|RMII_REF_CLK_Pin|RMII_CRS_DV_Pin); + + /* USER CODE BEGIN ETH_MspDeInit 1 */ + + /* USER CODE END ETH_MspDeInit 1 */ + } + +} + +/** +* @brief I2C MSP Initialization +* This function configures the hardware resources used in this example +* @param hi2c: I2C handle pointer +* @retval None +*/ +void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) +{ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspInit 0 */ + + /* USER CODE END I2C1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2C1; + PeriphClkInitStruct.I2c123ClockSelection = RCC_I2C123CLKSOURCE_D2PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_I2C1_CLK_ENABLE(); + /* USER CODE BEGIN I2C1_MspInit 1 */ + + /* USER CODE END I2C1_MspInit 1 */ + + } + +} + +/** +* @brief I2C MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hi2c: I2C handle pointer +* @retval None +*/ +void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c) +{ + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspDeInit 0 */ + + /* USER CODE END I2C1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_I2C1_CLK_DISABLE(); + /* USER CODE BEGIN I2C1_MspDeInit 1 */ + + /* USER CODE END I2C1_MspDeInit 1 */ + } + +} + +/** +* @brief QSPI MSP Initialization +* This function configures the hardware resources used in this example +* @param hqspi: QSPI handle pointer +* @retval None +*/ +void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi) +{ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hqspi->Instance==QUADSPI) + { + /* USER CODE BEGIN QUADSPI_MspInit 0 */ + + /* USER CODE END QUADSPI_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_QSPI; + PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_QSPI_CLK_ENABLE(); + /* USER CODE BEGIN QUADSPI_MspInit 1 */ + + /* USER CODE END QUADSPI_MspInit 1 */ + + } + +} + +/** +* @brief QSPI MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hqspi: QSPI handle pointer +* @retval None +*/ +void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi) +{ + if(hqspi->Instance==QUADSPI) + { + /* USER CODE BEGIN QUADSPI_MspDeInit 0 */ + + /* USER CODE END QUADSPI_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_QSPI_CLK_DISABLE(); + /* USER CODE BEGIN QUADSPI_MspDeInit 1 */ + + /* USER CODE END QUADSPI_MspDeInit 1 */ + } + +} + +/** +* @brief SD MSP Initialization +* This function configures the hardware resources used in this example +* @param hsd: SD handle pointer +* @retval None +*/ +void HAL_SD_MspInit(SD_HandleTypeDef* hsd) +{ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hsd->Instance==SDMMC1) + { + /* USER CODE BEGIN SDMMC1_MspInit 0 */ + + /* USER CODE END SDMMC1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SDMMC; + PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_SDMMC1_CLK_ENABLE(); + /* USER CODE BEGIN SDMMC1_MspInit 1 */ + + /* USER CODE END SDMMC1_MspInit 1 */ + + } + +} + +/** +* @brief SD MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hsd: SD handle pointer +* @retval None +*/ +void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd) +{ + if(hsd->Instance==SDMMC1) + { + /* USER CODE BEGIN SDMMC1_MspDeInit 0 */ + + /* USER CODE END SDMMC1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SDMMC1_CLK_DISABLE(); + /* USER CODE BEGIN SDMMC1_MspDeInit 1 */ + + /* USER CODE END SDMMC1_MspDeInit 1 */ + } + +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1; + PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + +} + +static uint32_t FMC_Initialized = 0; + +static void HAL_FMC_MspInit(void){ + /* USER CODE BEGIN FMC_MspInit 0 */ + + /* USER CODE END FMC_MspInit 0 */ + if (FMC_Initialized) { + return; + } + FMC_Initialized = 1; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_FMC; + PeriphClkInitStruct.FmcClockSelection = RCC_FMCCLKSOURCE_D1HCLK; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_FMC_CLK_ENABLE(); + /* USER CODE BEGIN FMC_MspInit 1 */ + + /* USER CODE END FMC_MspInit 1 */ +} + +void HAL_NOR_MspInit(NOR_HandleTypeDef* hnor){ + /* USER CODE BEGIN NOR_MspInit 0 */ + + /* USER CODE END NOR_MspInit 0 */ + HAL_FMC_MspInit(); + /* USER CODE BEGIN NOR_MspInit 1 */ + + /* USER CODE END NOR_MspInit 1 */ +} + +void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){ + /* USER CODE BEGIN SRAM_MspInit 0 */ + + /* USER CODE END SRAM_MspInit 0 */ + HAL_FMC_MspInit(); + /* USER CODE BEGIN SRAM_MspInit 1 */ + + /* USER CODE END SRAM_MspInit 1 */ +} + +void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef* hsdram){ + /* USER CODE BEGIN SDRAM_MspInit 0 */ + + /* USER CODE END SDRAM_MspInit 0 */ + HAL_FMC_MspInit(); + /* USER CODE BEGIN SDRAM_MspInit 1 */ + + /* USER CODE END SDRAM_MspInit 1 */ +} + +static uint32_t FMC_DeInitialized = 0; + +static void HAL_FMC_MspDeInit(void){ + /* USER CODE BEGIN FMC_MspDeInit 0 */ + + /* USER CODE END FMC_MspDeInit 0 */ + if (FMC_DeInitialized) { + return; + } + FMC_DeInitialized = 1; + /* Peripheral clock enable */ + __HAL_RCC_FMC_CLK_DISABLE(); + /* USER CODE BEGIN FMC_MspDeInit 1 */ + + /* USER CODE END FMC_MspDeInit 1 */ +} + +void HAL_NOR_MspDeInit(NOR_HandleTypeDef* hnor){ + /* USER CODE BEGIN NOR_MspDeInit 0 */ + + /* USER CODE END NOR_MspDeInit 0 */ + HAL_FMC_MspDeInit(); + /* USER CODE BEGIN NOR_MspDeInit 1 */ + + /* USER CODE END NOR_MspDeInit 1 */ +} + +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram){ + /* USER CODE BEGIN SRAM_MspDeInit 0 */ + + /* USER CODE END SRAM_MspDeInit 0 */ + HAL_FMC_MspDeInit(); + /* USER CODE BEGIN SRAM_MspDeInit 1 */ + + /* USER CODE END SRAM_MspDeInit 1 */ +} + +void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef* hsdram){ + /* USER CODE BEGIN SDRAM_MspDeInit 0 */ + + /* USER CODE END SDRAM_MspDeInit 0 */ + HAL_FMC_MspDeInit(); + /* USER CODE BEGIN SDRAM_MspDeInit 1 */ + + /* USER CODE END SDRAM_MspDeInit 1 */ +} + +void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai) +{ + + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; +/* SAI1 */ +} + +void HAL_SAI_MspDeInit(SAI_HandleTypeDef* hsai) +{ +/* SAI1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/stm32h7xx_it.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/stm32h7xx_it.c new file mode 100644 index 0000000..cd5531f --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM4/Src/stm32h7xx_it.c @@ -0,0 +1,203 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32h7xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Pre-fetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32H7xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32h7xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/main.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/main.h new file mode 100644 index 0000000..3bdd8a3 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/main.h @@ -0,0 +1,320 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); +void MX_DFSDM1_Init(void); +void MX_ETH_Init(void); + +/* USER CODE BEGIN EFP */ +extern int stdio_init (void); +extern int app_main (void); +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define D28_Pin GPIO_PIN_6 +#define D28_GPIO_Port GPIOI +#define FMC_NBL3_Pin GPIO_PIN_5 +#define FMC_NBL3_GPIO_Port GPIOI +#define FMC_NBL2_Pin GPIO_PIN_4 +#define FMC_NBL2_GPIO_Port GPIOI +#define ULPI_D7_Pin GPIO_PIN_5 +#define ULPI_D7_GPIO_Port GPIOB +#define FMC_NE3_Pin GPIO_PIN_10 +#define FMC_NE3_GPIO_Port GPIOG +#define QSPI_BK2_IO2_Pin GPIO_PIN_9 +#define QSPI_BK2_IO2_GPIO_Port GPIOG +#define FMC_NWE_Pin GPIO_PIN_5 +#define FMC_NWE_GPIO_Port GPIOD +#define FMC_NOE_Pin GPIO_PIN_4 +#define FMC_NOE_GPIO_Port GPIOD +#define SDIO1_D2_Pin GPIO_PIN_10 +#define SDIO1_D2_GPIO_Port GPIOC +#define D25_Pin GPIO_PIN_1 +#define D25_GPIO_Port GPIOI +#define D24_Pin GPIO_PIN_0 +#define D24_GPIO_Port GPIOI +#define D29_Pin GPIO_PIN_7 +#define D29_GPIO_Port GPIOI +#define FMC_NBL1_Pin GPIO_PIN_1 +#define FMC_NBL1_GPIO_Port GPIOE +#define I2C1_SCL_Pin GPIO_PIN_6 +#define I2C1_SCL_GPIO_Port GPIOB +#define RMII_TX_EN_Pin GPIO_PIN_11 +#define RMII_TX_EN_GPIO_Port GPIOG +#define FMC_NWAIT_Pin GPIO_PIN_6 +#define FMC_NWAIT_GPIO_Port GPIOD +#define SDIO1_D3_Pin GPIO_PIN_11 +#define SDIO1_D3_GPIO_Port GPIOC +#define D26_Pin GPIO_PIN_2 +#define D26_GPIO_Port GPIOI +#define D23_Pin GPIO_PIN_15 +#define D23_GPIO_Port GPIOH +#define D22_Pin GPIO_PIN_14 +#define D22_GPIO_Port GPIOH +#define OSC32_OUT_Pin GPIO_PIN_15 +#define OSC32_OUT_GPIO_Port GPIOC +#define OSC32_IN_Pin GPIO_PIN_14 +#define OSC32_IN_GPIO_Port GPIOC +#define FMC_NBL0_Pin GPIO_PIN_0 +#define FMC_NBL0_GPIO_Port GPIOE +#define I2C1_SDA_Pin GPIO_PIN_7 +#define I2C1_SDA_GPIO_Port GPIOB +#define RMII_TXD1_Pin GPIO_PIN_12 +#define RMII_TXD1_GPIO_Port GPIOG +#define FMC_NE1_Pin GPIO_PIN_7 +#define FMC_NE1_GPIO_Port GPIOD +#define SDIO1_CLK_Pin GPIO_PIN_12 +#define SDIO1_CLK_GPIO_Port GPIOC +#define D27__IS42S32800G_DQ27_Pin GPIO_PIN_3 +#define D27__IS42S32800G_DQ27_GPIO_Port GPIOI +#define SAI1_SCKA_Pin GPIO_PIN_5 +#define SAI1_SCKA_GPIO_Port GPIOE +#define SAI1_FSA_Pin GPIO_PIN_4 +#define SAI1_FSA_GPIO_Port GPIOE +#define SAI1_SDB_Pin GPIO_PIN_3 +#define SAI1_SDB_GPIO_Port GPIOE +#define SDIO1_CDIR_Pin GPIO_PIN_9 +#define SDIO1_CDIR_GPIO_Port GPIOB +#define SDIO1_CKIN_Pin GPIO_PIN_8 +#define SDIO1_CKIN_GPIO_Port GPIOB +#define SDNCAS_Pin GPIO_PIN_15 +#define SDNCAS_GPIO_Port GPIOG +#define QSPI_BK2_IO3_Pin GPIO_PIN_14 +#define QSPI_BK2_IO3_GPIO_Port GPIOG +#define RMII_TXD0_Pin GPIO_PIN_13 +#define RMII_TXD0_GPIO_Port GPIOG +#define SDIO1_CMD_Pin GPIO_PIN_2 +#define SDIO1_CMD_GPIO_Port GPIOD +#define D2_Pin GPIO_PIN_0 +#define D2_GPIO_Port GPIOD +#define USB_FS2_VBUS_Pin GPIO_PIN_9 +#define USB_FS2_VBUS_GPIO_Port GPIOA +#define D21_Pin GPIO_PIN_13 +#define D21_GPIO_Port GPIOH +#define D30_Pin GPIO_PIN_9 +#define D30_GPIO_Port GPIOI +#define SAI1_SDA_Pin GPIO_PIN_6 +#define SAI1_SDA_GPIO_Port GPIOE +#define D3_Pin GPIO_PIN_1 +#define D3_GPIO_Port GPIOD +#define SDIO1_D0_Pin GPIO_PIN_8 +#define SDIO1_D0_GPIO_Port GPIOC +#define SDIO1_D1_Pin GPIO_PIN_9 +#define SDIO1_D1_GPIO_Port GPIOC +#define MCO1_Pin GPIO_PIN_8 +#define MCO1_GPIO_Port GPIOA +#define USB_FS2_DP_Pin GPIO_PIN_12 +#define USB_FS2_DP_GPIO_Port GPIOA +#define USB_FS2_DM_Pin GPIO_PIN_11 +#define USB_FS2_DM_GPIO_Port GPIOA +#define D31_Pin GPIO_PIN_10 +#define D31_GPIO_Port GPIOI +#define ULPI_DIR_Pin GPIO_PIN_11 +#define ULPI_DIR_GPIO_Port GPIOI +#define SDIO1_D123DIR_Pin GPIO_PIN_7 +#define SDIO1_D123DIR_GPIO_Port GPIOC +#define SDIO1_D0DIR_Pin GPIO_PIN_6 +#define SDIO1_D0DIR_GPIO_Port GPIOC +#define SDCLK_Pin GPIO_PIN_8 +#define SDCLK_GPIO_Port GPIOG +#define SAI1_MCLKA_Pin GPIO_PIN_7 +#define SAI1_MCLKA_GPIO_Port GPIOG +#define A2_Pin GPIO_PIN_2 +#define A2_GPIO_Port GPIOF +#define A1_Pin GPIO_PIN_1 +#define A1_GPIO_Port GPIOF +#define A0_Pin GPIO_PIN_0 +#define A0_GPIO_Port GPIOF +#define QSPI_BK1_NCS_Pin GPIO_PIN_6 +#define QSPI_BK1_NCS_GPIO_Port GPIOG +#define A3_Pin GPIO_PIN_3 +#define A3_GPIO_Port GPIOF +#define A13_Pin GPIO_PIN_3 +#define A13_GPIO_Port GPIOG +#define A12_Pin GPIO_PIN_2 +#define A12_GPIO_Port GPIOG +#define OSC_OUT_Pin GPIO_PIN_1 +#define OSC_OUT_GPIO_Port GPIOH +#define OSC_IN_Pin GPIO_PIN_0 +#define OSC_IN_GPIO_Port GPIOH +#define A5_Pin GPIO_PIN_5 +#define A5_GPIO_Port GPIOF +#define A4_Pin GPIO_PIN_4 +#define A4_GPIO_Port GPIOF +#define QSPI_BK1_IO3_Pin GPIO_PIN_6 +#define QSPI_BK1_IO3_GPIO_Port GPIOF +#define QSPI_BK1_IO2_Pin GPIO_PIN_7 +#define QSPI_BK1_IO2_GPIO_Port GPIOF +#define QSPI_BK1_IO0_Pin GPIO_PIN_8 +#define QSPI_BK1_IO0_GPIO_Port GPIOF +#define ULPI_STP_Pin GPIO_PIN_0 +#define ULPI_STP_GPIO_Port GPIOC +#define QSPI_BK1_IO1_Pin GPIO_PIN_9 +#define QSPI_BK1_IO1_GPIO_Port GPIOF +#define RMII_MDC_Pin GPIO_PIN_1 +#define RMII_MDC_GPIO_Port GPIOC +#define DFSDM_CLK_Pin GPIO_PIN_2 +#define DFSDM_CLK_GPIO_Port GPIOC +#define DFSM_DAT1_Pin GPIO_PIN_3 +#define DFSM_DAT1_GPIO_Port GPIOC +#define QSPI_BK2_IO0_Pin GPIO_PIN_2 +#define QSPI_BK2_IO0_GPIO_Port GPIOH +#define RMII_MDIO_Pin GPIO_PIN_2 +#define RMII_MDIO_GPIO_Port GPIOA +#define RMII_REF_CLK_Pin GPIO_PIN_1 +#define RMII_REF_CLK_GPIO_Port GPIOA +#define D7_Pin GPIO_PIN_10 +#define D7_GPIO_Port GPIOE +#define QSPI_BK2_IO1_Pin GPIO_PIN_3 +#define QSPI_BK2_IO1_GPIO_Port GPIOH +#define ULPI_NXT_Pin GPIO_PIN_4 +#define ULPI_NXT_GPIO_Port GPIOH +#define SDNWE_Pin GPIO_PIN_5 +#define SDNWE_GPIO_Port GPIOH +#define A7_Pin GPIO_PIN_13 +#define A7_GPIO_Port GPIOF +#define A8_Pin GPIO_PIN_14 +#define A8_GPIO_Port GPIOF +#define D6_Pin GPIO_PIN_9 +#define D6_GPIO_Port GPIOE +#define D8_Pin GPIO_PIN_11 +#define D8_GPIO_Port GPIOE +#define ULPI_D3_Pin GPIO_PIN_10 +#define ULPI_D3_GPIO_Port GPIOB +#define ULPI_D4_Pin GPIO_PIN_11 +#define ULPI_D4_GPIO_Port GPIOB +#define D18_Pin GPIO_PIN_10 +#define D18_GPIO_Port GPIOH +#define D19_Pin GPIO_PIN_11 +#define D19_GPIO_Port GPIOH +#define D1_Pin GPIO_PIN_15 +#define D1_GPIO_Port GPIOD +#define D0_Pin GPIO_PIN_14 +#define D0_GPIO_Port GPIOD +#define RMII_CRS_DV_Pin GPIO_PIN_7 +#define RMII_CRS_DV_GPIO_Port GPIOA +#define QSPI_CLK_Pin GPIO_PIN_2 +#define QSPI_CLK_GPIO_Port GPIOB +#define A6_Pin GPIO_PIN_12 +#define A6_GPIO_Port GPIOF +#define A9_Pin GPIO_PIN_15 +#define A9_GPIO_Port GPIOF +#define D9_Pin GPIO_PIN_12 +#define D9_GPIO_Port GPIOE +#define D12_Pin GPIO_PIN_15 +#define D12_GPIO_Port GPIOE +#define D17_Pin GPIO_PIN_9 +#define D17_GPIO_Port GPIOH +#define D20_Pin GPIO_PIN_12 +#define D20_GPIO_Port GPIOH +#define A16_Pin GPIO_PIN_11 +#define A16_GPIO_Port GPIOD +#define A17_Pin GPIO_PIN_12 +#define A17_GPIO_Port GPIOD +#define A18_Pin GPIO_PIN_13 +#define A18_GPIO_Port GPIOD +#define ULPI_CK_Pin GPIO_PIN_5 +#define ULPI_CK_GPIO_Port GPIOA +#define RMII_RXD0_Pin GPIO_PIN_4 +#define RMII_RXD0_GPIO_Port GPIOC +#define ULPI_D2_Pin GPIO_PIN_1 +#define ULPI_D2_GPIO_Port GPIOB +#define SNDRAS_Pin GPIO_PIN_11 +#define SNDRAS_GPIO_Port GPIOF +#define A10_Pin GPIO_PIN_0 +#define A10_GPIO_Port GPIOG +#define D5_Pin GPIO_PIN_8 +#define D5_GPIO_Port GPIOE +#define D10_Pin GPIO_PIN_13 +#define D10_GPIO_Port GPIOE +#define SDNE1_Pin GPIO_PIN_6 +#define SDNE1_GPIO_Port GPIOH +#define D16_Pin GPIO_PIN_8 +#define D16_GPIO_Port GPIOH +#define ULPI_D5_Pin GPIO_PIN_12 +#define ULPI_D5_GPIO_Port GPIOB +#define RS_232RX_Pin GPIO_PIN_15 +#define RS_232RX_GPIO_Port GPIOB +#define D15_Pin GPIO_PIN_10 +#define D15_GPIO_Port GPIOD +#define D14_Pin GPIO_PIN_9 +#define D14_GPIO_Port GPIOD +#define ULPI_D0_Pin GPIO_PIN_3 +#define ULPI_D0_GPIO_Port GPIOA +#define RMII_RXD1_Pin GPIO_PIN_5 +#define RMII_RXD1_GPIO_Port GPIOC +#define ULPI_D1_Pin GPIO_PIN_0 +#define ULPI_D1_GPIO_Port GPIOB +#define A11_Pin GPIO_PIN_1 +#define A11_GPIO_Port GPIOG +#define D4_Pin GPIO_PIN_7 +#define D4_GPIO_Port GPIOE +#define D11_Pin GPIO_PIN_14 +#define D11_GPIO_Port GPIOE +#define SDCKE1_Pin GPIO_PIN_7 +#define SDCKE1_GPIO_Port GPIOH +#define ULPI_D6_Pin GPIO_PIN_13 +#define ULPI_D6_GPIO_Port GPIOB +#define RS232_TX_Pin GPIO_PIN_14 +#define RS232_TX_GPIO_Port GPIOB +#define D13_Pin GPIO_PIN_8 +#define D13_GPIO_Port GPIOD + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/stm32h7xx_hal_conf.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/stm32h7xx_hal_conf.h new file mode 100644 index 0000000..f4eb7dc --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/stm32h7xx_hal_conf.h @@ -0,0 +1,515 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_CONF_H +#define STM32H7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + + /* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +/* #define HAL_FMAC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CORDIC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +#define HAL_ETH_MODULE_ENABLED +/* #define HAL_ETH_LEGACY_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +#define HAL_NOR_MODULE_ENABLED +/* #define HAL_OTFDEC_MODULE_ENABLED */ +#define HAL_SRAM_MODULE_ENABLED +#define HAL_SDRAM_MODULE_ENABLED +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_HSEM_MODULE_ENABLED */ +/* #define HAL_GFXMMU_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_OSPI_MODULE_ENABLED */ +/* #define HAL_XSPI_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +#define HAL_LTDC_MODULE_ENABLED +#define HAL_QSPI_MODULE_ENABLED +/* #define HAL_RAMECC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +#define HAL_SAI_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +#define HAL_DFSDM_MODULE_ENABLED +#define HAL_DSI_MODULE_ENABLED +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ +/* #define HAL_PSSI_MODULE_ENABLED */ +/* #define HAL_DTS_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_MDMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_HSEM_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (25000000UL) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal oscillator (CSI) default value. + * This value is the default CSI value after Reset. + */ +#if !defined (CSI_VALUE) + #define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (15UL) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ +#define USE_SPI_CRC 0U /*!< use CRC in SPI */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */ +#define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################### Ethernet Configuration ######################### */ +#define ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */ + +#define ETH_MAC_ADDR0 (0x02UL) +#define ETH_MAC_ADDR1 (0x00UL) +#define ETH_MAC_ADDR2 (0x00UL) +#define ETH_MAC_ADDR3 (0x00UL) +#define ETH_MAC_ADDR4 (0x00UL) +#define ETH_MAC_ADDR5 (0x00UL) + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_MDMA_MODULE_ENABLED + #include "stm32h7xx_hal_mdma.h" +#endif /* HAL_MDMA_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32h7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32h7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32h7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DTS_MODULE_ENABLED + #include "stm32h7xx_hal_dts.h" +#endif /* HAL_DTS_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_ETH_LEGACY_MODULE_ENABLED + #include "stm32h7xx_hal_eth_legacy.h" +#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32h7xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32h7xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORDIC_MODULE_ENABLED + #include "stm32h7xx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32h7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32h7xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_FMAC_MODULE_ENABLED + #include "stm32h7xx_hal_fmac.h" +#endif /* HAL_FMAC_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32h7xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32h7xx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32h7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32h7xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32h7xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_OTFDEC_MODULE_ENABLED +#include "stm32h7xx_hal_otfdec.h" +#endif /* HAL_OTFDEC_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED + #include "stm32h7xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32h7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + #include "stm32h7xx_hal_ramecc.h" +#endif /* HAL_RAMECC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32h7xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_CONF_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/stm32h7xx_it.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/stm32h7xx_it.h new file mode 100644 index 0000000..0ad5cd2 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Inc/stm32h7xx_it.h @@ -0,0 +1,65 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_IT_H +#define __STM32H7xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void DebugMon_Handler(void); +void USART1_IRQHandler(void); +void TIM17_IRQHandler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_IT_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/main.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/main.c new file mode 100644 index 0000000..cfbd7f1 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/main.c @@ -0,0 +1,1063 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "string.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +#include "cmsis_vio.h" +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +#ifndef HSEM_ID_0 +#define HSEM_ID_0 (0U) /* HW semaphore 0*/ +#endif + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ +#pragma location=0x30000000 +ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */ +#pragma location=0x30000080 +ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */ + +#elif defined ( __CC_ARM ) /* MDK ARM Compiler */ + +__attribute__((at(0x30000000))) ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */ +__attribute__((at(0x30000080))) ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */ + +#elif defined ( __GNUC__ ) /* GNU Compiler */ + +ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((section(".RxDecripSection"))); /* Ethernet Rx DMA Descriptors */ +ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((section(".TxDecripSection"))); /* Ethernet Tx DMA Descriptors */ +#endif + +ETH_TxPacketConfig TxConfig; + +DFSDM_Channel_HandleTypeDef hdfsdm1_channel1; + +DSI_HandleTypeDef hdsi; + +ETH_HandleTypeDef heth; + +I2C_HandleTypeDef hi2c1; + +LTDC_HandleTypeDef hltdc; + +QSPI_HandleTypeDef hqspi; + +SAI_HandleTypeDef hsai_BlockB1; +SAI_HandleTypeDef hsai_BlockA1; + +SD_HandleTypeDef hsd1; + +UART_HandleTypeDef huart1; + +PCD_HandleTypeDef hpcd_USB_OTG_FS; +PCD_HandleTypeDef hpcd_USB_OTG_HS; + +NOR_HandleTypeDef hnor1; +SRAM_HandleTypeDef hsram2; +SDRAM_HandleTypeDef hsdram1; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_DSIHOST_DSI_Init(void); +static void MX_FMC_Init(void); +static void MX_I2C1_Init(void); +static void MX_LTDC_Init(void); +static void MX_QUADSPI_Init(void); +static void MX_SAI1_Init(void); +static void MX_SDMMC1_SD_Init(void); +static void MX_USART1_UART_Init(void); +static void MX_USB_OTG_FS_PCD_Init(void); +static void MX_USB_OTG_HS_PCD_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ +/* USER CODE BEGIN Boot_Mode_Sequence_0 */ + int32_t timeout; +/* USER CODE END Boot_Mode_Sequence_0 */ + +/* USER CODE BEGIN Boot_Mode_Sequence_1 */ + /* Wait until CPU2 boots and enters in stop mode or timeout*/ + timeout = 0xFFFF; + while((__HAL_RCC_GET_FLAG(RCC_FLAG_D2CKRDY) != RESET) && (timeout-- > 0)); + if ( timeout < 0 ) + { + Error_Handler(); + } +/* USER CODE END Boot_Mode_Sequence_1 */ + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); +/* USER CODE BEGIN Boot_Mode_Sequence_2 */ +/* When system initialization is finished, Cortex-M7 will release Cortex-M4 by means of +HSEM notification */ +/*HW semaphore Clock enable*/ +__HAL_RCC_HSEM_CLK_ENABLE(); +/*Take HSEM */ +HAL_HSEM_FastTake(HSEM_ID_0); +/*Release HSEM in order to notify the CPU2(CM4)*/ +HAL_HSEM_Release(HSEM_ID_0,0); +/* wait until CPU2 wakes up from stop mode */ +timeout = 0xFFFF; +while((__HAL_RCC_GET_FLAG(RCC_FLAG_D2CKRDY) == RESET) && (timeout-- > 0)); +if ( timeout < 0 ) +{ +Error_Handler(); +} +/* USER CODE END Boot_Mode_Sequence_2 */ + + /* USER CODE BEGIN SysInit */ + SystemCoreClockUpdate(); + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_DSIHOST_DSI_Init(); + MX_FMC_Init(); + MX_I2C1_Init(); + MX_LTDC_Init(); + MX_QUADSPI_Init(); + MX_SAI1_Init(); + MX_USART1_UART_Init(); + MX_USB_OTG_FS_PCD_Init(); + MX_USB_OTG_HS_PCD_Init(); + /* USER CODE BEGIN 2 */ + + stdio_init(); /* Initialize STDIO */ + + vioInit(); /* Initialize Virtual I/O */ + + app_main(); /* Execute Application main */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Supply configuration update enable + */ + HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY); + + /** Configure the main internal regulator output voltage + */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48|RCC_OSCILLATORTYPE_HSI + |RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSIState = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 2; + RCC_OscInitStruct.PLL.PLLN = 12; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 1; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_3; + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2 + |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV1; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) + { + Error_Handler(); + } + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); +} + +/** + * @brief DFSDM1 Initialization Function + * @param None + * @retval None + */ +void MX_DFSDM1_Init(void) +{ + + /* USER CODE BEGIN DFSDM1_Init 0 */ + + /* USER CODE END DFSDM1_Init 0 */ + + /* USER CODE BEGIN DFSDM1_Init 1 */ + + /* USER CODE END DFSDM1_Init 1 */ + hdfsdm1_channel1.Instance = DFSDM1_Channel1; + hdfsdm1_channel1.Init.OutputClock.Activation = ENABLE; + hdfsdm1_channel1.Init.OutputClock.Selection = DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM; + hdfsdm1_channel1.Init.OutputClock.Divider = 2; + hdfsdm1_channel1.Init.Input.Multiplexer = DFSDM_CHANNEL_EXTERNAL_INPUTS; + hdfsdm1_channel1.Init.Input.DataPacking = DFSDM_CHANNEL_STANDARD_MODE; + hdfsdm1_channel1.Init.Input.Pins = DFSDM_CHANNEL_SAME_CHANNEL_PINS; + hdfsdm1_channel1.Init.SerialInterface.Type = DFSDM_CHANNEL_SPI_RISING; + hdfsdm1_channel1.Init.SerialInterface.SpiClock = DFSDM_CHANNEL_SPI_CLOCK_INTERNAL; + hdfsdm1_channel1.Init.Awd.FilterOrder = DFSDM_CHANNEL_FASTSINC_ORDER; + hdfsdm1_channel1.Init.Awd.Oversampling = 1; + hdfsdm1_channel1.Init.Offset = 0; + hdfsdm1_channel1.Init.RightBitShift = 0x00; + if (HAL_DFSDM_ChannelInit(&hdfsdm1_channel1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN DFSDM1_Init 2 */ + + /* USER CODE END DFSDM1_Init 2 */ + +} + +/** + * @brief DSIHOST Initialization Function + * @param None + * @retval None + */ +static void MX_DSIHOST_DSI_Init(void) +{ + + /* USER CODE BEGIN DSIHOST_Init 0 */ + + /* USER CODE END DSIHOST_Init 0 */ + + DSI_PLLInitTypeDef PLLInit = {0}; + DSI_HOST_TimeoutTypeDef HostTimeouts = {0}; + DSI_PHY_TimerTypeDef PhyTimings = {0}; + DSI_LPCmdTypeDef LPCmd = {0}; + DSI_CmdCfgTypeDef CmdCfg = {0}; + + /* USER CODE BEGIN DSIHOST_Init 1 */ + + /* USER CODE END DSIHOST_Init 1 */ + hdsi.Instance = DSI; + hdsi.Init.AutomaticClockLaneControl = DSI_AUTO_CLK_LANE_CTRL_DISABLE; + hdsi.Init.TXEscapeCkdiv = 2; + hdsi.Init.NumberOfLanes = DSI_ONE_DATA_LANE; + PLLInit.PLLNDIV = 20; + PLLInit.PLLIDF = DSI_PLL_IN_DIV1; + PLLInit.PLLODF = DSI_PLL_OUT_DIV2; + if (HAL_DSI_Init(&hdsi, &PLLInit) != HAL_OK) + { + Error_Handler(); + } + HostTimeouts.TimeoutCkdiv = 1; + HostTimeouts.HighSpeedTransmissionTimeout = 0; + HostTimeouts.LowPowerReceptionTimeout = 0; + HostTimeouts.HighSpeedReadTimeout = 0; + HostTimeouts.LowPowerReadTimeout = 0; + HostTimeouts.HighSpeedWriteTimeout = 0; + HostTimeouts.HighSpeedWritePrespMode = DSI_HS_PM_DISABLE; + HostTimeouts.LowPowerWriteTimeout = 0; + HostTimeouts.BTATimeout = 0; + if (HAL_DSI_ConfigHostTimeouts(&hdsi, &HostTimeouts) != HAL_OK) + { + Error_Handler(); + } + PhyTimings.ClockLaneHS2LPTime = 20; + PhyTimings.ClockLaneLP2HSTime = 18; + PhyTimings.DataLaneHS2LPTime = 10; + PhyTimings.DataLaneLP2HSTime = 13; + PhyTimings.DataLaneMaxReadTime = 0; + PhyTimings.StopWaitTime = 0; + if (HAL_DSI_ConfigPhyTimer(&hdsi, &PhyTimings) != HAL_OK) + { + Error_Handler(); + } + if (HAL_DSI_ConfigFlowControl(&hdsi, DSI_FLOW_CONTROL_BTA) != HAL_OK) + { + Error_Handler(); + } + if (HAL_DSI_SetLowPowerRXFilter(&hdsi, 10000) != HAL_OK) + { + Error_Handler(); + } + if (HAL_DSI_ConfigErrorMonitor(&hdsi, HAL_DSI_ERROR_NONE) != HAL_OK) + { + Error_Handler(); + } + LPCmd.LPGenShortWriteNoP = DSI_LP_GSW0P_DISABLE; + LPCmd.LPGenShortWriteOneP = DSI_LP_GSW1P_DISABLE; + LPCmd.LPGenShortWriteTwoP = DSI_LP_GSW2P_DISABLE; + LPCmd.LPGenShortReadNoP = DSI_LP_GSR0P_DISABLE; + LPCmd.LPGenShortReadOneP = DSI_LP_GSR1P_DISABLE; + LPCmd.LPGenShortReadTwoP = DSI_LP_GSR2P_DISABLE; + LPCmd.LPGenLongWrite = DSI_LP_GLW_DISABLE; + LPCmd.LPDcsShortWriteNoP = DSI_LP_DSW0P_DISABLE; + LPCmd.LPDcsShortWriteOneP = DSI_LP_DSW1P_DISABLE; + LPCmd.LPDcsShortReadNoP = DSI_LP_DSR0P_DISABLE; + LPCmd.LPDcsLongWrite = DSI_LP_DLW_DISABLE; + LPCmd.LPMaxReadPacket = DSI_LP_MRDP_DISABLE; + LPCmd.AcknowledgeRequest = DSI_ACKNOWLEDGE_DISABLE; + if (HAL_DSI_ConfigCommand(&hdsi, &LPCmd) != HAL_OK) + { + Error_Handler(); + } + CmdCfg.VirtualChannelID = 0; + CmdCfg.ColorCoding = DSI_RGB888; + CmdCfg.CommandSize = 640; + CmdCfg.TearingEffectSource = DSI_TE_EXTERNAL; + CmdCfg.TearingEffectPolarity = DSI_TE_RISING_EDGE; + CmdCfg.HSPolarity = DSI_HSYNC_ACTIVE_LOW; + CmdCfg.VSPolarity = DSI_VSYNC_ACTIVE_LOW; + CmdCfg.DEPolarity = DSI_DATA_ENABLE_ACTIVE_HIGH; + CmdCfg.VSyncPol = DSI_VSYNC_FALLING; + CmdCfg.AutomaticRefresh = DSI_AR_ENABLE; + CmdCfg.TEAcknowledgeRequest = DSI_TE_ACKNOWLEDGE_DISABLE; + if (HAL_DSI_ConfigAdaptedCommandMode(&hdsi, &CmdCfg) != HAL_OK) + { + Error_Handler(); + } + if (HAL_DSI_SetGenericVCID(&hdsi, 0) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN DSIHOST_Init 2 */ + + /* USER CODE END DSIHOST_Init 2 */ + +} + +/** + * @brief ETH Initialization Function + * @param None + * @retval None + */ +void MX_ETH_Init(void) +{ + + /* USER CODE BEGIN ETH_Init 0 */ + + /* USER CODE END ETH_Init 0 */ + + static uint8_t MACAddr[6]; + + /* USER CODE BEGIN ETH_Init 1 */ + + /* USER CODE END ETH_Init 1 */ + heth.Instance = ETH; + MACAddr[0] = 0x00; + MACAddr[1] = 0x80; + MACAddr[2] = 0xE1; + MACAddr[3] = 0x00; + MACAddr[4] = 0x00; + MACAddr[5] = 0x00; + heth.Init.MACAddr = &MACAddr[0]; + heth.Init.MediaInterface = HAL_ETH_RMII_MODE; + heth.Init.TxDesc = DMATxDscrTab; + heth.Init.RxDesc = DMARxDscrTab; + heth.Init.RxBuffLen = 1524; + + /* USER CODE BEGIN MACADDRESS */ + + /* USER CODE END MACADDRESS */ + + if (HAL_ETH_Init(&heth) != HAL_OK) + { + Error_Handler(); + } + + memset(&TxConfig, 0 , sizeof(ETH_TxPacketConfig)); + TxConfig.Attributes = ETH_TX_PACKETS_FEATURES_CSUM | ETH_TX_PACKETS_FEATURES_CRCPAD; + TxConfig.ChecksumCtrl = ETH_CHECKSUM_IPHDR_PAYLOAD_INSERT_PHDR_CALC; + TxConfig.CRCPadCtrl = ETH_CRC_PAD_INSERT; + /* USER CODE BEGIN ETH_Init 2 */ + + /* USER CODE END ETH_Init 2 */ + +} + +/** + * @brief I2C1 Initialization Function + * @param None + * @retval None + */ +static void MX_I2C1_Init(void) +{ + + /* USER CODE BEGIN I2C1_Init 0 */ + + /* USER CODE END I2C1_Init 0 */ + + /* USER CODE BEGIN I2C1_Init 1 */ + + /* USER CODE END I2C1_Init 1 */ + hi2c1.Instance = I2C1; + hi2c1.Init.Timing = 0x109093DC; + hi2c1.Init.OwnAddress1 = 0; + hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + hi2c1.Init.OwnAddress2 = 0; + hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK; + hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + if (HAL_I2C_Init(&hi2c1) != HAL_OK) + { + Error_Handler(); + } + + /** Configure Analogue filter + */ + if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK) + { + Error_Handler(); + } + + /** Configure Digital filter + */ + if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN I2C1_Init 2 */ + + /* USER CODE END I2C1_Init 2 */ + +} + +/** + * @brief LTDC Initialization Function + * @param None + * @retval None + */ +static void MX_LTDC_Init(void) +{ + + /* USER CODE BEGIN LTDC_Init 0 */ + + /* USER CODE END LTDC_Init 0 */ + + LTDC_LayerCfgTypeDef pLayerCfg = {0}; + LTDC_LayerCfgTypeDef pLayerCfg1 = {0}; + + /* USER CODE BEGIN LTDC_Init 1 */ + + /* USER CODE END LTDC_Init 1 */ + hltdc.Instance = LTDC; + hltdc.Init.HSPolarity = LTDC_HSPOLARITY_AL; + hltdc.Init.VSPolarity = LTDC_VSPOLARITY_AL; + hltdc.Init.DEPolarity = LTDC_DEPOLARITY_AL; + hltdc.Init.PCPolarity = LTDC_PCPOLARITY_IPC; + hltdc.Init.HorizontalSync = 7; + hltdc.Init.VerticalSync = 3; + hltdc.Init.AccumulatedHBP = 14; + hltdc.Init.AccumulatedVBP = 5; + hltdc.Init.AccumulatedActiveW = 654; + hltdc.Init.AccumulatedActiveH = 485; + hltdc.Init.TotalWidth = 660; + hltdc.Init.TotalHeigh = 487; + hltdc.Init.Backcolor.Blue = 0; + hltdc.Init.Backcolor.Green = 0; + hltdc.Init.Backcolor.Red = 0; + if (HAL_LTDC_Init(&hltdc) != HAL_OK) + { + Error_Handler(); + } + pLayerCfg.WindowX0 = 0; + pLayerCfg.WindowX1 = 0; + pLayerCfg.WindowY0 = 0; + pLayerCfg.WindowY1 = 0; + pLayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_ARGB8888; + pLayerCfg.Alpha = 0; + pLayerCfg.Alpha0 = 0; + pLayerCfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_CA; + pLayerCfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_CA; + pLayerCfg.FBStartAdress = 0; + pLayerCfg.ImageWidth = 0; + pLayerCfg.ImageHeight = 0; + pLayerCfg.Backcolor.Blue = 0; + pLayerCfg.Backcolor.Green = 0; + pLayerCfg.Backcolor.Red = 0; + if (HAL_LTDC_ConfigLayer(&hltdc, &pLayerCfg, 0) != HAL_OK) + { + Error_Handler(); + } + pLayerCfg1.WindowX0 = 0; + pLayerCfg1.WindowX1 = 0; + pLayerCfg1.WindowY0 = 0; + pLayerCfg1.WindowY1 = 0; + pLayerCfg1.PixelFormat = LTDC_PIXEL_FORMAT_ARGB8888; + pLayerCfg1.Alpha = 0; + pLayerCfg1.Alpha0 = 0; + pLayerCfg1.BlendingFactor1 = LTDC_BLENDING_FACTOR1_CA; + pLayerCfg1.BlendingFactor2 = LTDC_BLENDING_FACTOR2_CA; + pLayerCfg1.FBStartAdress = 0; + pLayerCfg1.ImageWidth = 0; + pLayerCfg1.ImageHeight = 0; + pLayerCfg1.Backcolor.Blue = 0; + pLayerCfg1.Backcolor.Green = 0; + pLayerCfg1.Backcolor.Red = 0; + if (HAL_LTDC_ConfigLayer(&hltdc, &pLayerCfg1, 1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN LTDC_Init 2 */ + + /* USER CODE END LTDC_Init 2 */ + +} + +/** + * @brief QUADSPI Initialization Function + * @param None + * @retval None + */ +static void MX_QUADSPI_Init(void) +{ + + /* USER CODE BEGIN QUADSPI_Init 0 */ + + /* USER CODE END QUADSPI_Init 0 */ + + /* USER CODE BEGIN QUADSPI_Init 1 */ + + /* USER CODE END QUADSPI_Init 1 */ + /* QUADSPI parameter configuration*/ + hqspi.Instance = QUADSPI; + hqspi.Init.ClockPrescaler = 255; + hqspi.Init.FifoThreshold = 1; + hqspi.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_NONE; + hqspi.Init.FlashSize = 1; + hqspi.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_1_CYCLE; + hqspi.Init.ClockMode = QSPI_CLOCK_MODE_0; + hqspi.Init.DualFlash = QSPI_DUALFLASH_ENABLE; + if (HAL_QSPI_Init(&hqspi) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN QUADSPI_Init 2 */ + + /* USER CODE END QUADSPI_Init 2 */ + +} + +/** + * @brief SAI1 Initialization Function + * @param None + * @retval None + */ +static void MX_SAI1_Init(void) +{ + + /* USER CODE BEGIN SAI1_Init 0 */ + + /* USER CODE END SAI1_Init 0 */ + + /* USER CODE BEGIN SAI1_Init 1 */ + + /* USER CODE END SAI1_Init 1 */ + hsai_BlockB1.Instance = SAI1_Block_B; + hsai_BlockB1.Init.Protocol = SAI_FREE_PROTOCOL; + hsai_BlockB1.Init.AudioMode = SAI_MODESLAVE_RX; + hsai_BlockB1.Init.DataSize = SAI_DATASIZE_8; + hsai_BlockB1.Init.FirstBit = SAI_FIRSTBIT_MSB; + hsai_BlockB1.Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE; + hsai_BlockB1.Init.Synchro = SAI_SYNCHRONOUS; + hsai_BlockB1.Init.OutputDrive = SAI_OUTPUTDRIVE_DISABLE; + hsai_BlockB1.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_EMPTY; + hsai_BlockB1.Init.SynchroExt = SAI_SYNCEXT_DISABLE; + hsai_BlockB1.Init.MonoStereoMode = SAI_STEREOMODE; + hsai_BlockB1.Init.CompandingMode = SAI_NOCOMPANDING; + hsai_BlockB1.Init.TriState = SAI_OUTPUT_NOTRELEASED; + hsai_BlockB1.Init.PdmInit.Activation = DISABLE; + hsai_BlockB1.Init.PdmInit.MicPairsNbr = 1; + hsai_BlockB1.Init.PdmInit.ClockEnable = SAI_PDM_CLOCK1_ENABLE; + hsai_BlockB1.FrameInit.FrameLength = 8; + hsai_BlockB1.FrameInit.ActiveFrameLength = 1; + hsai_BlockB1.FrameInit.FSDefinition = SAI_FS_STARTFRAME; + hsai_BlockB1.FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW; + hsai_BlockB1.FrameInit.FSOffset = SAI_FS_FIRSTBIT; + hsai_BlockB1.SlotInit.FirstBitOffset = 0; + hsai_BlockB1.SlotInit.SlotSize = SAI_SLOTSIZE_DATASIZE; + hsai_BlockB1.SlotInit.SlotNumber = 1; + hsai_BlockB1.SlotInit.SlotActive = 0x00000000; + if (HAL_SAI_Init(&hsai_BlockB1) != HAL_OK) + { + Error_Handler(); + } + hsai_BlockA1.Instance = SAI1_Block_A; + hsai_BlockA1.Init.AudioMode = SAI_MODEMASTER_TX; + hsai_BlockA1.Init.Synchro = SAI_ASYNCHRONOUS; + hsai_BlockA1.Init.OutputDrive = SAI_OUTPUTDRIVE_DISABLE; + hsai_BlockA1.Init.NoDivider = SAI_MASTERDIVIDER_ENABLE; + hsai_BlockA1.Init.FIFOThreshold = SAI_FIFOTHRESHOLD_EMPTY; + hsai_BlockA1.Init.AudioFrequency = SAI_AUDIO_FREQUENCY_192K; + hsai_BlockA1.Init.SynchroExt = SAI_SYNCEXT_DISABLE; + hsai_BlockA1.Init.MonoStereoMode = SAI_STEREOMODE; + hsai_BlockA1.Init.CompandingMode = SAI_NOCOMPANDING; + hsai_BlockA1.Init.TriState = SAI_OUTPUT_NOTRELEASED; + if (HAL_SAI_InitProtocol(&hsai_BlockA1, SAI_I2S_STANDARD, SAI_PROTOCOL_DATASIZE_16BIT, 2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SAI1_Init 2 */ + + /* USER CODE END SAI1_Init 2 */ + +} + +/** + * @brief SDMMC1 Initialization Function + * @param None + * @retval None + */ +static void MX_SDMMC1_SD_Init(void) +{ + + /* USER CODE BEGIN SDMMC1_Init 0 */ + + /* USER CODE END SDMMC1_Init 0 */ + + /* USER CODE BEGIN SDMMC1_Init 1 */ + + /* USER CODE END SDMMC1_Init 1 */ + hsd1.Instance = SDMMC1; + hsd1.Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING; + hsd1.Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE; + hsd1.Init.BusWide = SDMMC_BUS_WIDE_4B; + hsd1.Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE; + hsd1.Init.ClockDiv = 0; + hsd1.Init.TranceiverPresent = SDMMC_TRANSCEIVER_PRESENT; + if (HAL_SD_Init(&hsd1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SDMMC1_Init 2 */ + + /* USER CODE END SDMMC1_Init 2 */ + +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 115200; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ + +} + +/** + * @brief USB_OTG_FS Initialization Function + * @param None + * @retval None + */ +static void MX_USB_OTG_FS_PCD_Init(void) +{ + + /* USER CODE BEGIN USB_OTG_FS_Init 0 */ + + /* USER CODE END USB_OTG_FS_Init 0 */ + + /* USER CODE BEGIN USB_OTG_FS_Init 1 */ + + /* USER CODE END USB_OTG_FS_Init 1 */ + hpcd_USB_OTG_FS.Instance = USB_OTG_FS; + hpcd_USB_OTG_FS.Init.dev_endpoints = 9; + hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL; + hpcd_USB_OTG_FS.Init.dma_enable = DISABLE; + hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED; + hpcd_USB_OTG_FS.Init.Sof_enable = DISABLE; + hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE; + hpcd_USB_OTG_FS.Init.lpm_enable = DISABLE; + hpcd_USB_OTG_FS.Init.battery_charging_enable = ENABLE; + hpcd_USB_OTG_FS.Init.vbus_sensing_enable = ENABLE; + hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE; + if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USB_OTG_FS_Init 2 */ + + /* USER CODE END USB_OTG_FS_Init 2 */ + +} + +/** + * @brief USB_OTG_HS Initialization Function + * @param None + * @retval None + */ +static void MX_USB_OTG_HS_PCD_Init(void) +{ + + /* USER CODE BEGIN USB_OTG_HS_Init 0 */ + + /* USER CODE END USB_OTG_HS_Init 0 */ + + /* USER CODE BEGIN USB_OTG_HS_Init 1 */ + + /* USER CODE END USB_OTG_HS_Init 1 */ + hpcd_USB_OTG_HS.Instance = USB_OTG_HS; + hpcd_USB_OTG_HS.Init.dev_endpoints = 9; + hpcd_USB_OTG_HS.Init.speed = PCD_SPEED_HIGH; + hpcd_USB_OTG_HS.Init.dma_enable = DISABLE; + hpcd_USB_OTG_HS.Init.phy_itface = USB_OTG_ULPI_PHY; + hpcd_USB_OTG_HS.Init.Sof_enable = DISABLE; + hpcd_USB_OTG_HS.Init.low_power_enable = DISABLE; + hpcd_USB_OTG_HS.Init.lpm_enable = DISABLE; + hpcd_USB_OTG_HS.Init.battery_charging_enable = ENABLE; + hpcd_USB_OTG_HS.Init.vbus_sensing_enable = DISABLE; + hpcd_USB_OTG_HS.Init.use_dedicated_ep1 = DISABLE; + hpcd_USB_OTG_HS.Init.use_external_vbus = DISABLE; + if (HAL_PCD_Init(&hpcd_USB_OTG_HS) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USB_OTG_HS_Init 2 */ + + /* USER CODE END USB_OTG_HS_Init 2 */ + +} + +/* FMC initialization function */ +void MX_FMC_Init(void) +{ + + /* USER CODE BEGIN FMC_Init 0 */ + + /* USER CODE END FMC_Init 0 */ + + FMC_NORSRAM_TimingTypeDef Timing = {0}; + FMC_SDRAM_TimingTypeDef SdramTiming = {0}; + + /* USER CODE BEGIN FMC_Init 1 */ + + /* USER CODE END FMC_Init 1 */ + + /** Perform the NOR1 memory initialization sequence + */ + hnor1.Instance = FMC_NORSRAM_DEVICE; + hnor1.Extended = FMC_NORSRAM_EXTENDED_DEVICE; + /* hnor1.Init */ + hnor1.Init.NSBank = FMC_NORSRAM_BANK1; + hnor1.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE; + hnor1.Init.MemoryType = FMC_MEMORY_TYPE_NOR; + hnor1.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_16; + hnor1.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_DISABLE; + hnor1.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_LOW; + hnor1.Init.WaitSignalActive = FMC_WAIT_TIMING_BEFORE_WS; + hnor1.Init.WriteOperation = FMC_WRITE_OPERATION_DISABLE; + hnor1.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE; + hnor1.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE; + hnor1.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_ENABLE; + hnor1.Init.WriteBurst = FMC_WRITE_BURST_DISABLE; + hnor1.Init.ContinuousClock = FMC_CONTINUOUS_CLOCK_SYNC_ONLY; + hnor1.Init.WriteFifo = FMC_WRITE_FIFO_ENABLE; + hnor1.Init.PageSize = FMC_PAGE_SIZE_NONE; + /* Timing */ + Timing.AddressSetupTime = 15; + Timing.AddressHoldTime = 15; + Timing.DataSetupTime = 255; + Timing.BusTurnAroundDuration = 15; + Timing.CLKDivision = 16; + Timing.DataLatency = 17; + Timing.AccessMode = FMC_ACCESS_MODE_A; + /* ExtTiming */ + + if (HAL_NOR_Init(&hnor1, &Timing, NULL) != HAL_OK) + { + Error_Handler( ); + } + + /** Perform the SRAM2 memory initialization sequence + */ + hsram2.Instance = FMC_NORSRAM_DEVICE; + hsram2.Extended = FMC_NORSRAM_EXTENDED_DEVICE; + /* hsram2.Init */ + hsram2.Init.NSBank = FMC_NORSRAM_BANK3; + hsram2.Init.DataAddressMux = FMC_DATA_ADDRESS_MUX_DISABLE; + hsram2.Init.MemoryType = FMC_MEMORY_TYPE_SRAM; + hsram2.Init.MemoryDataWidth = FMC_NORSRAM_MEM_BUS_WIDTH_16; + hsram2.Init.BurstAccessMode = FMC_BURST_ACCESS_MODE_DISABLE; + hsram2.Init.WaitSignalPolarity = FMC_WAIT_SIGNAL_POLARITY_LOW; + hsram2.Init.WaitSignalActive = FMC_WAIT_TIMING_BEFORE_WS; + hsram2.Init.WriteOperation = FMC_WRITE_OPERATION_DISABLE; + hsram2.Init.WaitSignal = FMC_WAIT_SIGNAL_DISABLE; + hsram2.Init.ExtendedMode = FMC_EXTENDED_MODE_DISABLE; + hsram2.Init.AsynchronousWait = FMC_ASYNCHRONOUS_WAIT_ENABLE; + hsram2.Init.WriteBurst = FMC_WRITE_BURST_DISABLE; + hsram2.Init.ContinuousClock = FMC_CONTINUOUS_CLOCK_SYNC_ONLY; + hsram2.Init.WriteFifo = FMC_WRITE_FIFO_ENABLE; + hsram2.Init.PageSize = FMC_PAGE_SIZE_NONE; + /* Timing */ + Timing.AddressSetupTime = 15; + Timing.AddressHoldTime = 15; + Timing.DataSetupTime = 255; + Timing.BusTurnAroundDuration = 15; + Timing.CLKDivision = 16; + Timing.DataLatency = 17; + Timing.AccessMode = FMC_ACCESS_MODE_A; + /* ExtTiming */ + + if (HAL_SRAM_Init(&hsram2, &Timing, NULL) != HAL_OK) + { + Error_Handler( ); + } + + /** Perform the SDRAM1 memory initialization sequence + */ + hsdram1.Instance = FMC_SDRAM_DEVICE; + /* hsdram1.Init */ + hsdram1.Init.SDBank = FMC_SDRAM_BANK2; + hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8; + hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_11; + hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_32; + hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4; + hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_1; + hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE; + hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_DISABLE; + hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_DISABLE; + hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0; + /* SdramTiming */ + SdramTiming.LoadToActiveDelay = 16; + SdramTiming.ExitSelfRefreshDelay = 16; + SdramTiming.SelfRefreshTime = 16; + SdramTiming.RowCycleDelay = 16; + SdramTiming.WriteRecoveryTime = 16; + SdramTiming.RPDelay = 16; + SdramTiming.RCDDelay = 16; + + if (HAL_SDRAM_Init(&hsdram1, &SdramTiming) != HAL_OK) + { + Error_Handler( ); + } + + /* USER CODE BEGIN FMC_Init 2 */ + + /* USER CODE END FMC_Init 2 */ +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; +/* USER CODE BEGIN MX_GPIO_Init_1 */ +/* USER CODE END MX_GPIO_Init_1 */ + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOI_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + + /*Configure GPIO pin : PE2 */ + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF10_SAI4; + HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + /*Configure GPIO pin : MCO1_Pin */ + GPIO_InitStruct.Pin = MCO1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO1_GPIO_Port, &GPIO_InitStruct); + +/* USER CODE BEGIN MX_GPIO_Init_2 */ +/* USER CODE END MX_GPIO_Init_2 */ +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief Period elapsed callback in non blocking mode + * @note This function is called when TIM17 interrupt took place, inside + * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param htim : TIM handle + * @retval None + */ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* USER CODE BEGIN Callback 0 */ + + /* USER CODE END Callback 0 */ + if (htim->Instance == TIM17) { + HAL_IncTick(); + } + /* USER CODE BEGIN Callback 1 */ + + /* USER CODE END Callback 1 */ +} + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_hal_msp.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_hal_msp.c new file mode 100644 index 0000000..cceb58d --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_hal_msp.c @@ -0,0 +1,1412 @@ + +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +static uint32_t DFSDM1_Init = 0; +/** +* @brief DFSDM_Channel MSP Initialization +* This function configures the hardware resources used in this example +* @param hdfsdm_channel: DFSDM_Channel handle pointer +* @retval None +*/ +void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef* hdfsdm_channel) +{ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(DFSDM1_Init == 0) + { + /* USER CODE BEGIN DFSDM1_MspInit 0 */ + + /* USER CODE END DFSDM1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_DFSDM1; + PeriphClkInitStruct.Dfsdm1ClockSelection = RCC_DFSDM1CLKSOURCE_D2PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_DFSDM1_CLK_ENABLE(); + /* USER CODE BEGIN DFSDM1_MspInit 1 */ + + /* USER CODE END DFSDM1_MspInit 1 */ + + DFSDM1_Init++; + } + +} + +/** +* @brief DFSDM_Channel MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hdfsdm_channel: DFSDM_Channel handle pointer +* @retval None +*/ +void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef* hdfsdm_channel) +{ + DFSDM1_Init-- ; + if(DFSDM1_Init == 0) + { + /* USER CODE BEGIN DFSDM1_MspDeInit 0 */ + + /* USER CODE END DFSDM1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_DFSDM1_CLK_DISABLE(); + /* USER CODE BEGIN DFSDM1_MspDeInit 1 */ + + /* USER CODE END DFSDM1_MspDeInit 1 */ + } + +} + +/** +* @brief DSI MSP Initialization +* This function configures the hardware resources used in this example +* @param hdsi: DSI handle pointer +* @retval None +*/ +void HAL_DSI_MspInit(DSI_HandleTypeDef* hdsi) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hdsi->Instance==DSI) + { + /* USER CODE BEGIN DSI_MspInit 0 */ + + /* USER CODE END DSI_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_DSI; + PeriphClkInitStruct.DsiClockSelection = RCC_DSICLKSOURCE_PHY; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_DSI_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**DSIHOST GPIO Configuration + PA15 (JTDI) ------> DSIHOST_TE + DSI_D1P ------> DSIHOST_D1P + DSI_D1N ------> DSIHOST_D1N + DSI_CKP ------> DSIHOST_CKP + DSI_CKN ------> DSIHOST_CKN + DSI_D0P ------> DSIHOST_D0P + DSI_D0N ------> DSIHOST_D0N + */ + GPIO_InitStruct.Pin = GPIO_PIN_15; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF13_DSI; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN DSI_MspInit 1 */ + + /* USER CODE END DSI_MspInit 1 */ + + } + +} + +/** +* @brief DSI MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hdsi: DSI handle pointer +* @retval None +*/ +void HAL_DSI_MspDeInit(DSI_HandleTypeDef* hdsi) +{ + if(hdsi->Instance==DSI) + { + /* USER CODE BEGIN DSI_MspDeInit 0 */ + + /* USER CODE END DSI_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_DSI_CLK_DISABLE(); + + /**DSIHOST GPIO Configuration + PA15 (JTDI) ------> DSIHOST_TE + DSI_D1P ------> DSIHOST_D1P + DSI_D1N ------> DSIHOST_D1N + DSI_CKP ------> DSIHOST_CKP + DSI_CKN ------> DSIHOST_CKN + DSI_D0P ------> DSIHOST_D0P + DSI_D0N ------> DSIHOST_D0N + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_15); + + /* USER CODE BEGIN DSI_MspDeInit 1 */ + + /* USER CODE END DSI_MspDeInit 1 */ + } + +} + +/** +* @brief ETH MSP Initialization +* This function configures the hardware resources used in this example +* @param heth: ETH handle pointer +* @retval None +*/ +void HAL_ETH_MspInit(ETH_HandleTypeDef* heth) +{ + if(heth->Instance==ETH) + { + /* USER CODE BEGIN ETH_MspInit 0 */ + + /* USER CODE END ETH_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_ETH1MAC_CLK_ENABLE(); + __HAL_RCC_ETH1TX_CLK_ENABLE(); + __HAL_RCC_ETH1RX_CLK_ENABLE(); + /* USER CODE BEGIN ETH_MspInit 1 */ + + /* USER CODE END ETH_MspInit 1 */ + + } + +} + +/** +* @brief ETH MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param heth: ETH handle pointer +* @retval None +*/ +void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth) +{ + if(heth->Instance==ETH) + { + /* USER CODE BEGIN ETH_MspDeInit 0 */ + + /* USER CODE END ETH_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_ETH1MAC_CLK_DISABLE(); + __HAL_RCC_ETH1TX_CLK_DISABLE(); + __HAL_RCC_ETH1RX_CLK_DISABLE(); + /* USER CODE BEGIN ETH_MspDeInit 1 */ + + /* USER CODE END ETH_MspDeInit 1 */ + } + +} + +/** +* @brief I2C MSP Initialization +* This function configures the hardware resources used in this example +* @param hi2c: I2C handle pointer +* @retval None +*/ +void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspInit 0 */ + + /* USER CODE END I2C1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2C1; + PeriphClkInitStruct.I2c123ClockSelection = RCC_I2C123CLKSOURCE_D2PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**I2C1 GPIO Configuration + PB6 ------> I2C1_SCL + PB7 ------> I2C1_SDA + */ + GPIO_InitStruct.Pin = I2C1_SCL_Pin|I2C1_SDA_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* Peripheral clock enable */ + __HAL_RCC_I2C1_CLK_ENABLE(); + /* USER CODE BEGIN I2C1_MspInit 1 */ + + /* USER CODE END I2C1_MspInit 1 */ + + } + +} + +/** +* @brief I2C MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hi2c: I2C handle pointer +* @retval None +*/ +void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c) +{ + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspDeInit 0 */ + + /* USER CODE END I2C1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_I2C1_CLK_DISABLE(); + + /**I2C1 GPIO Configuration + PB6 ------> I2C1_SCL + PB7 ------> I2C1_SDA + */ + HAL_GPIO_DeInit(I2C1_SCL_GPIO_Port, I2C1_SCL_Pin); + + HAL_GPIO_DeInit(I2C1_SDA_GPIO_Port, I2C1_SDA_Pin); + + /* USER CODE BEGIN I2C1_MspDeInit 1 */ + + /* USER CODE END I2C1_MspDeInit 1 */ + } + +} + +/** +* @brief LTDC MSP Initialization +* This function configures the hardware resources used in this example +* @param hltdc: LTDC handle pointer +* @retval None +*/ +void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc) +{ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hltdc->Instance==LTDC) + { + /* USER CODE BEGIN LTDC_MspInit 0 */ + + /* USER CODE END LTDC_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC; + PeriphClkInitStruct.PLL3.PLL3M = 1; + PeriphClkInitStruct.PLL3.PLL3N = 6; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 2; + PeriphClkInitStruct.PLL3.PLL3R = 1; + PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_3; + PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOMEDIUM; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_LTDC_CLK_ENABLE(); + /* USER CODE BEGIN LTDC_MspInit 1 */ + + /* USER CODE END LTDC_MspInit 1 */ + + } + +} + +/** +* @brief LTDC MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hltdc: LTDC handle pointer +* @retval None +*/ +void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc) +{ + if(hltdc->Instance==LTDC) + { + /* USER CODE BEGIN LTDC_MspDeInit 0 */ + + /* USER CODE END LTDC_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_LTDC_CLK_DISABLE(); + /* USER CODE BEGIN LTDC_MspDeInit 1 */ + + /* USER CODE END LTDC_MspDeInit 1 */ + } + +} + +/** +* @brief QSPI MSP Initialization +* This function configures the hardware resources used in this example +* @param hqspi: QSPI handle pointer +* @retval None +*/ +void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hqspi->Instance==QUADSPI) + { + /* USER CODE BEGIN QUADSPI_MspInit 0 */ + + /* USER CODE END QUADSPI_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_QSPI; + PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_QSPI_CLK_ENABLE(); + + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**QUADSPI GPIO Configuration + PG9 ------> QUADSPI_BK2_IO2 + PG14 ------> QUADSPI_BK2_IO3 + PG6 ------> QUADSPI_BK1_NCS + PF6 ------> QUADSPI_BK1_IO3 + PF7 ------> QUADSPI_BK1_IO2 + PF8 ------> QUADSPI_BK1_IO0 + PF9 ------> QUADSPI_BK1_IO1 + PH2 ------> QUADSPI_BK2_IO0 + PH3 ------> QUADSPI_BK2_IO1 + PB2 ------> QUADSPI_CLK + */ + GPIO_InitStruct.Pin = QSPI_BK2_IO2_Pin|QSPI_BK2_IO3_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI; + HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = QSPI_BK1_NCS_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI; + HAL_GPIO_Init(QSPI_BK1_NCS_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = QSPI_BK1_IO3_Pin|QSPI_BK1_IO2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI; + HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = QSPI_BK1_IO0_Pin|QSPI_BK1_IO1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI; + HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = QSPI_BK2_IO0_Pin|QSPI_BK2_IO1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI; + HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = QSPI_CLK_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI; + HAL_GPIO_Init(QSPI_CLK_GPIO_Port, &GPIO_InitStruct); + + /* USER CODE BEGIN QUADSPI_MspInit 1 */ + + /* USER CODE END QUADSPI_MspInit 1 */ + + } + +} + +/** +* @brief QSPI MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hqspi: QSPI handle pointer +* @retval None +*/ +void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi) +{ + if(hqspi->Instance==QUADSPI) + { + /* USER CODE BEGIN QUADSPI_MspDeInit 0 */ + + /* USER CODE END QUADSPI_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_QSPI_CLK_DISABLE(); + + /**QUADSPI GPIO Configuration + PG9 ------> QUADSPI_BK2_IO2 + PG14 ------> QUADSPI_BK2_IO3 + PG6 ------> QUADSPI_BK1_NCS + PF6 ------> QUADSPI_BK1_IO3 + PF7 ------> QUADSPI_BK1_IO2 + PF8 ------> QUADSPI_BK1_IO0 + PF9 ------> QUADSPI_BK1_IO1 + PH2 ------> QUADSPI_BK2_IO0 + PH3 ------> QUADSPI_BK2_IO1 + PB2 ------> QUADSPI_CLK + */ + HAL_GPIO_DeInit(GPIOG, QSPI_BK2_IO2_Pin|QSPI_BK2_IO3_Pin|QSPI_BK1_NCS_Pin); + + HAL_GPIO_DeInit(GPIOF, QSPI_BK1_IO3_Pin|QSPI_BK1_IO2_Pin|QSPI_BK1_IO0_Pin|QSPI_BK1_IO1_Pin); + + HAL_GPIO_DeInit(GPIOH, QSPI_BK2_IO0_Pin|QSPI_BK2_IO1_Pin); + + HAL_GPIO_DeInit(QSPI_CLK_GPIO_Port, QSPI_CLK_Pin); + + /* USER CODE BEGIN QUADSPI_MspDeInit 1 */ + + /* USER CODE END QUADSPI_MspDeInit 1 */ + } + +} + +/** +* @brief SD MSP Initialization +* This function configures the hardware resources used in this example +* @param hsd: SD handle pointer +* @retval None +*/ +void HAL_SD_MspInit(SD_HandleTypeDef* hsd) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hsd->Instance==SDMMC1) + { + /* USER CODE BEGIN SDMMC1_MspInit 0 */ + + /* USER CODE END SDMMC1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SDMMC; + PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_SDMMC1_CLK_ENABLE(); + + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + /**SDMMC1 GPIO Configuration + PC10 ------> SDMMC1_D2 + PC11 ------> SDMMC1_D3 + PC12 ------> SDMMC1_CK + PB9 ------> SDMMC1_CDIR + PB8 ------> SDMMC1_CKIN + PD2 ------> SDMMC1_CMD + PC8 ------> SDMMC1_D0 + PC9 ------> SDMMC1_D1 + PC7 ------> SDMMC1_D123DIR + PC6 ------> SDMMC1_D0DIR + */ + GPIO_InitStruct.Pin = SDIO1_D2_Pin|SDIO1_D3_Pin|SDIO1_CLK_Pin|SDIO1_D0_Pin + |SDIO1_D1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = SDIO1_CDIR_Pin|SDIO1_CKIN_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_SDIO1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = SDIO1_CMD_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1; + HAL_GPIO_Init(SDIO1_CMD_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = SDIO1_D123DIR_Pin|SDIO1_D0DIR_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF8_SDIO1; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* USER CODE BEGIN SDMMC1_MspInit 1 */ + + /* USER CODE END SDMMC1_MspInit 1 */ + + } + +} + +/** +* @brief SD MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hsd: SD handle pointer +* @retval None +*/ +void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd) +{ + if(hsd->Instance==SDMMC1) + { + /* USER CODE BEGIN SDMMC1_MspDeInit 0 */ + + /* USER CODE END SDMMC1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SDMMC1_CLK_DISABLE(); + + /**SDMMC1 GPIO Configuration + PC10 ------> SDMMC1_D2 + PC11 ------> SDMMC1_D3 + PC12 ------> SDMMC1_CK + PB9 ------> SDMMC1_CDIR + PB8 ------> SDMMC1_CKIN + PD2 ------> SDMMC1_CMD + PC8 ------> SDMMC1_D0 + PC9 ------> SDMMC1_D1 + PC7 ------> SDMMC1_D123DIR + PC6 ------> SDMMC1_D0DIR + */ + HAL_GPIO_DeInit(GPIOC, SDIO1_D2_Pin|SDIO1_D3_Pin|SDIO1_CLK_Pin|SDIO1_D0_Pin + |SDIO1_D1_Pin|SDIO1_D123DIR_Pin|SDIO1_D0DIR_Pin); + + HAL_GPIO_DeInit(GPIOB, SDIO1_CDIR_Pin|SDIO1_CKIN_Pin); + + HAL_GPIO_DeInit(SDIO1_CMD_GPIO_Port, SDIO1_CMD_Pin); + + /* USER CODE BEGIN SDMMC1_MspDeInit 1 */ + + /* USER CODE END SDMMC1_MspDeInit 1 */ + } + +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1; + PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**USART1 GPIO Configuration + PB15 ------> USART1_RX + PB14 ------> USART1_TX + */ + GPIO_InitStruct.Pin = RS_232RX_Pin|RS232_TX_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF4_USART1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USART1 interrupt Init */ + HAL_NVIC_SetPriority(USART1_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USART1_IRQn); + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PB15 ------> USART1_RX + PB14 ------> USART1_TX + */ + HAL_GPIO_DeInit(GPIOB, RS_232RX_Pin|RS232_TX_Pin); + + /* USART1 interrupt DeInit */ + HAL_NVIC_DisableIRQ(USART1_IRQn); + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + +} + +/** +* @brief PCD MSP Initialization +* This function configures the hardware resources used in this example +* @param hpcd: PCD handle pointer +* @retval None +*/ +void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(hpcd->Instance==USB_OTG_FS) + { + /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */ + + /* USER CODE END USB_OTG_FS_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Enable USB Voltage detector + */ + HAL_PWREx_EnableUSBVoltageDetector(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USB_OTG_FS GPIO Configuration + PA9 ------> USB_OTG_FS_VBUS + PA12 ------> USB_OTG_FS_DP + PA11 ------> USB_OTG_FS_DM + */ + GPIO_InitStruct.Pin = USB_FS2_VBUS_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(USB_FS2_VBUS_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = USB_FS2_DP_Pin|USB_FS2_DM_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG1_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Peripheral clock enable */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + /* USER CODE BEGIN USB_OTG_FS_MspInit 1 */ + + /* USER CODE END USB_OTG_FS_MspInit 1 */ + } + else if(hpcd->Instance==USB_OTG_HS) + { + /* USER CODE BEGIN USB_OTG_HS_MspInit 0 */ + + /* USER CODE END USB_OTG_HS_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Enable USB Voltage detector + */ + HAL_PWREx_EnableUSBVoltageDetector(); + + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOI_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USB_OTG_HS GPIO Configuration + PB5 ------> USB_OTG_HS_ULPI_D7 + PI11 ------> USB_OTG_HS_ULPI_DIR + PC0 ------> USB_OTG_HS_ULPI_STP + PH4 ------> USB_OTG_HS_ULPI_NXT + PB10 ------> USB_OTG_HS_ULPI_D3 + PB11 ------> USB_OTG_HS_ULPI_D4 + PA5 ------> USB_OTG_HS_ULPI_CK + PB1 ------> USB_OTG_HS_ULPI_D2 + PB12 ------> USB_OTG_HS_ULPI_D5 + PA3 ------> USB_OTG_HS_ULPI_D0 + PB0 ------> USB_OTG_HS_ULPI_D1 + PB13 ------> USB_OTG_HS_ULPI_D6 + */ + GPIO_InitStruct.Pin = ULPI_D7_Pin|ULPI_D3_Pin|ULPI_D4_Pin|ULPI_D2_Pin + |ULPI_D5_Pin|ULPI_D1_Pin|ULPI_D6_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = ULPI_DIR_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(ULPI_DIR_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = ULPI_STP_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(ULPI_STP_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = ULPI_NXT_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(ULPI_NXT_GPIO_Port, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = ULPI_CK_Pin|ULPI_D0_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Peripheral clock enable */ + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); + /* USER CODE BEGIN USB_OTG_HS_MspInit 1 */ + + /* USER CODE END USB_OTG_HS_MspInit 1 */ + } + +} + +/** +* @brief PCD MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hpcd: PCD handle pointer +* @retval None +*/ +void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd) +{ + if(hpcd->Instance==USB_OTG_FS) + { + /* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */ + + /* USER CODE END USB_OTG_FS_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_OTG_FS_CLK_DISABLE(); + + /**USB_OTG_FS GPIO Configuration + PA9 ------> USB_OTG_FS_VBUS + PA12 ------> USB_OTG_FS_DP + PA11 ------> USB_OTG_FS_DM + */ + HAL_GPIO_DeInit(GPIOA, USB_FS2_VBUS_Pin|USB_FS2_DP_Pin|USB_FS2_DM_Pin); + + /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */ + + /* USER CODE END USB_OTG_FS_MspDeInit 1 */ + } + else if(hpcd->Instance==USB_OTG_HS) + { + /* USER CODE BEGIN USB_OTG_HS_MspDeInit 0 */ + + /* USER CODE END USB_OTG_HS_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_OTG_HS_CLK_DISABLE(); + __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE(); + + /**USB_OTG_HS GPIO Configuration + PB5 ------> USB_OTG_HS_ULPI_D7 + PI11 ------> USB_OTG_HS_ULPI_DIR + PC0 ------> USB_OTG_HS_ULPI_STP + PH4 ------> USB_OTG_HS_ULPI_NXT + PB10 ------> USB_OTG_HS_ULPI_D3 + PB11 ------> USB_OTG_HS_ULPI_D4 + PA5 ------> USB_OTG_HS_ULPI_CK + PB1 ------> USB_OTG_HS_ULPI_D2 + PB12 ------> USB_OTG_HS_ULPI_D5 + PA3 ------> USB_OTG_HS_ULPI_D0 + PB0 ------> USB_OTG_HS_ULPI_D1 + PB13 ------> USB_OTG_HS_ULPI_D6 + */ + HAL_GPIO_DeInit(GPIOB, ULPI_D7_Pin|ULPI_D3_Pin|ULPI_D4_Pin|ULPI_D2_Pin + |ULPI_D5_Pin|ULPI_D1_Pin|ULPI_D6_Pin); + + HAL_GPIO_DeInit(ULPI_DIR_GPIO_Port, ULPI_DIR_Pin); + + HAL_GPIO_DeInit(ULPI_STP_GPIO_Port, ULPI_STP_Pin); + + HAL_GPIO_DeInit(ULPI_NXT_GPIO_Port, ULPI_NXT_Pin); + + HAL_GPIO_DeInit(GPIOA, ULPI_CK_Pin|ULPI_D0_Pin); + + /* USER CODE BEGIN USB_OTG_HS_MspDeInit 1 */ + + /* USER CODE END USB_OTG_HS_MspDeInit 1 */ + } + +} + +static uint32_t FMC_Initialized = 0; + +static void HAL_FMC_MspInit(void){ + /* USER CODE BEGIN FMC_MspInit 0 */ + + /* USER CODE END FMC_MspInit 0 */ + GPIO_InitTypeDef GPIO_InitStruct ={0}; + if (FMC_Initialized) { + return; + } + FMC_Initialized = 1; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_FMC; + PeriphClkInitStruct.FmcClockSelection = RCC_FMCCLKSOURCE_D1HCLK; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_FMC_CLK_ENABLE(); + + /** FMC GPIO Configuration + PI6 ------> FMC_D28 + PI5 ------> FMC_NBL3 + PI4 ------> FMC_NBL2 + PG10 ------> FMC_NE3 + PD5 ------> FMC_NWE + PD4 ------> FMC_NOE + PI1 ------> FMC_D25 + PI0 ------> FMC_D24 + PI7 ------> FMC_D29 + PE1 ------> FMC_NBL1 + PD6 ------> FMC_NWAIT + PI2 ------> FMC_D26 + PH15 ------> FMC_D23 + PH14 ------> FMC_D22 + PE0 ------> FMC_NBL0 + PD7 ------> FMC_NE1 + PI3 ------> FMC_D27 + PG15 ------> FMC_SDNCAS + PD0 ------> FMC_D2 + PH13 ------> FMC_D21 + PI9 ------> FMC_D30 + PD1 ------> FMC_D3 + PI10 ------> FMC_D31 + PG8 ------> FMC_SDCLK + PF2 ------> FMC_A2 + PF1 ------> FMC_A1 + PF0 ------> FMC_A0 + PG5 ------> FMC_A15 + PG5 ------> FMC_BA1 + PF3 ------> FMC_A3 + PG4 ------> FMC_A14 + PG4 ------> FMC_BA0 + PG3 ------> FMC_A13 + PG2 ------> FMC_A12 + PF5 ------> FMC_A5 + PF4 ------> FMC_A4 + PE10 ------> FMC_D7 + PH5 ------> FMC_SDNWE + PF13 ------> FMC_A7 + PF14 ------> FMC_A8 + PE9 ------> FMC_D6 + PE11 ------> FMC_D8 + PH10 ------> FMC_D18 + PH11 ------> FMC_D19 + PD15 ------> FMC_D1 + PD14 ------> FMC_D0 + PF12 ------> FMC_A6 + PF15 ------> FMC_A9 + PE12 ------> FMC_D9 + PE15 ------> FMC_D12 + PH9 ------> FMC_D17 + PH12 ------> FMC_D20 + PD11 ------> FMC_A16 + PD12 ------> FMC_A17 + PD13 ------> FMC_A18 + PF11 ------> FMC_SDNRAS + PG0 ------> FMC_A10 + PE8 ------> FMC_D5 + PE13 ------> FMC_D10 + PH6 ------> FMC_SDNE1 + PH8 ------> FMC_D16 + PD10 ------> FMC_D15 + PD9 ------> FMC_D14 + PG1 ------> FMC_A11 + PE7 ------> FMC_D4 + PE14 ------> FMC_D11 + PH7 ------> FMC_SDCKE1 + PD8 ------> FMC_D13 + */ + GPIO_InitStruct.Pin = D28_Pin|FMC_NBL3_Pin|FMC_NBL2_Pin|D25_Pin + |D24_Pin|D29_Pin|D26_Pin|D27__IS42S32800G_DQ27_Pin + |D30_Pin|D31_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FMC; + HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = FMC_NE3_Pin|SDNCAS_Pin|SDCLK_Pin|GPIO_PIN_5 + |GPIO_PIN_4|A13_Pin|A12_Pin|A10_Pin + |A11_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FMC; + HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = FMC_NWE_Pin|FMC_NOE_Pin|FMC_NWAIT_Pin|FMC_NE1_Pin + |D2_Pin|D3_Pin|D1_Pin|D0_Pin + |A16_Pin|A17_Pin|A18_Pin|D15_Pin + |D14_Pin|D13_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FMC; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = FMC_NBL1_Pin|FMC_NBL0_Pin|D7_Pin|D6_Pin + |D8_Pin|D9_Pin|D12_Pin|D5_Pin + |D10_Pin|D4_Pin|D11_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FMC; + HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = D23_Pin|D22_Pin|D21_Pin|SDNWE_Pin + |D18_Pin|D19_Pin|D17_Pin|D20_Pin + |SDNE1_Pin|D16_Pin|SDCKE1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FMC; + HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = A2_Pin|A1_Pin|A0_Pin|A3_Pin + |A5_Pin|A4_Pin|A7_Pin|A8_Pin + |A6_Pin|A9_Pin|SNDRAS_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF12_FMC; + HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); + + /* USER CODE BEGIN FMC_MspInit 1 */ + + /* USER CODE END FMC_MspInit 1 */ +} + +void HAL_NOR_MspInit(NOR_HandleTypeDef* hnor){ + /* USER CODE BEGIN NOR_MspInit 0 */ + + /* USER CODE END NOR_MspInit 0 */ + HAL_FMC_MspInit(); + /* USER CODE BEGIN NOR_MspInit 1 */ + + /* USER CODE END NOR_MspInit 1 */ +} + +void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){ + /* USER CODE BEGIN SRAM_MspInit 0 */ + + /* USER CODE END SRAM_MspInit 0 */ + HAL_FMC_MspInit(); + /* USER CODE BEGIN SRAM_MspInit 1 */ + + /* USER CODE END SRAM_MspInit 1 */ +} + +void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef* hsdram){ + /* USER CODE BEGIN SDRAM_MspInit 0 */ + + /* USER CODE END SDRAM_MspInit 0 */ + HAL_FMC_MspInit(); + /* USER CODE BEGIN SDRAM_MspInit 1 */ + + /* USER CODE END SDRAM_MspInit 1 */ +} + +static uint32_t FMC_DeInitialized = 0; + +static void HAL_FMC_MspDeInit(void){ + /* USER CODE BEGIN FMC_MspDeInit 0 */ + + /* USER CODE END FMC_MspDeInit 0 */ + if (FMC_DeInitialized) { + return; + } + FMC_DeInitialized = 1; + /* Peripheral clock enable */ + __HAL_RCC_FMC_CLK_DISABLE(); + + /** FMC GPIO Configuration + PI6 ------> FMC_D28 + PI5 ------> FMC_NBL3 + PI4 ------> FMC_NBL2 + PG10 ------> FMC_NE3 + PD5 ------> FMC_NWE + PD4 ------> FMC_NOE + PI1 ------> FMC_D25 + PI0 ------> FMC_D24 + PI7 ------> FMC_D29 + PE1 ------> FMC_NBL1 + PD6 ------> FMC_NWAIT + PI2 ------> FMC_D26 + PH15 ------> FMC_D23 + PH14 ------> FMC_D22 + PE0 ------> FMC_NBL0 + PD7 ------> FMC_NE1 + PI3 ------> FMC_D27 + PG15 ------> FMC_SDNCAS + PD0 ------> FMC_D2 + PH13 ------> FMC_D21 + PI9 ------> FMC_D30 + PD1 ------> FMC_D3 + PI10 ------> FMC_D31 + PG8 ------> FMC_SDCLK + PF2 ------> FMC_A2 + PF1 ------> FMC_A1 + PF0 ------> FMC_A0 + PG5 ------> FMC_A15 + PG5 ------> FMC_BA1 + PF3 ------> FMC_A3 + PG4 ------> FMC_A14 + PG4 ------> FMC_BA0 + PG3 ------> FMC_A13 + PG2 ------> FMC_A12 + PF5 ------> FMC_A5 + PF4 ------> FMC_A4 + PE10 ------> FMC_D7 + PH5 ------> FMC_SDNWE + PF13 ------> FMC_A7 + PF14 ------> FMC_A8 + PE9 ------> FMC_D6 + PE11 ------> FMC_D8 + PH10 ------> FMC_D18 + PH11 ------> FMC_D19 + PD15 ------> FMC_D1 + PD14 ------> FMC_D0 + PF12 ------> FMC_A6 + PF15 ------> FMC_A9 + PE12 ------> FMC_D9 + PE15 ------> FMC_D12 + PH9 ------> FMC_D17 + PH12 ------> FMC_D20 + PD11 ------> FMC_A16 + PD12 ------> FMC_A17 + PD13 ------> FMC_A18 + PF11 ------> FMC_SDNRAS + PG0 ------> FMC_A10 + PE8 ------> FMC_D5 + PE13 ------> FMC_D10 + PH6 ------> FMC_SDNE1 + PH8 ------> FMC_D16 + PD10 ------> FMC_D15 + PD9 ------> FMC_D14 + PG1 ------> FMC_A11 + PE7 ------> FMC_D4 + PE14 ------> FMC_D11 + PH7 ------> FMC_SDCKE1 + PD8 ------> FMC_D13 + */ + HAL_GPIO_DeInit(GPIOI, D28_Pin|FMC_NBL3_Pin|FMC_NBL2_Pin|D25_Pin + |D24_Pin|D29_Pin|D26_Pin|D27__IS42S32800G_DQ27_Pin + |D30_Pin|D31_Pin); + + HAL_GPIO_DeInit(GPIOG, FMC_NE3_Pin|SDNCAS_Pin|SDCLK_Pin|GPIO_PIN_5 + |GPIO_PIN_4|A13_Pin|A12_Pin|A10_Pin + |A11_Pin); + + HAL_GPIO_DeInit(GPIOD, FMC_NWE_Pin|FMC_NOE_Pin|FMC_NWAIT_Pin|FMC_NE1_Pin + |D2_Pin|D3_Pin|D1_Pin|D0_Pin + |A16_Pin|A17_Pin|A18_Pin|D15_Pin + |D14_Pin|D13_Pin); + + HAL_GPIO_DeInit(GPIOE, FMC_NBL1_Pin|FMC_NBL0_Pin|D7_Pin|D6_Pin + |D8_Pin|D9_Pin|D12_Pin|D5_Pin + |D10_Pin|D4_Pin|D11_Pin); + + HAL_GPIO_DeInit(GPIOH, D23_Pin|D22_Pin|D21_Pin|SDNWE_Pin + |D18_Pin|D19_Pin|D17_Pin|D20_Pin + |SDNE1_Pin|D16_Pin|SDCKE1_Pin); + + HAL_GPIO_DeInit(GPIOF, A2_Pin|A1_Pin|A0_Pin|A3_Pin + |A5_Pin|A4_Pin|A7_Pin|A8_Pin + |A6_Pin|A9_Pin|SNDRAS_Pin); + + /* USER CODE BEGIN FMC_MspDeInit 1 */ + + /* USER CODE END FMC_MspDeInit 1 */ +} + +void HAL_NOR_MspDeInit(NOR_HandleTypeDef* hnor){ + /* USER CODE BEGIN NOR_MspDeInit 0 */ + + /* USER CODE END NOR_MspDeInit 0 */ + HAL_FMC_MspDeInit(); + /* USER CODE BEGIN NOR_MspDeInit 1 */ + + /* USER CODE END NOR_MspDeInit 1 */ +} + +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram){ + /* USER CODE BEGIN SRAM_MspDeInit 0 */ + + /* USER CODE END SRAM_MspDeInit 0 */ + HAL_FMC_MspDeInit(); + /* USER CODE BEGIN SRAM_MspDeInit 1 */ + + /* USER CODE END SRAM_MspDeInit 1 */ +} + +void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef* hsdram){ + /* USER CODE BEGIN SDRAM_MspDeInit 0 */ + + /* USER CODE END SDRAM_MspDeInit 0 */ + HAL_FMC_MspDeInit(); + /* USER CODE BEGIN SDRAM_MspDeInit 1 */ + + /* USER CODE END SDRAM_MspDeInit 1 */ +} + +static uint32_t SAI1_client =0; + +void HAL_SAI_MspInit(SAI_HandleTypeDef* hsai) +{ + + GPIO_InitTypeDef GPIO_InitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; +/* SAI1 */ + if(hsai->Instance==SAI1_Block_A) + { + /* Peripheral clock enable */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SAI1; + PeriphClkInitStruct.Sai1ClockSelection = RCC_SAI1CLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + if (SAI1_client == 0) + { + __HAL_RCC_SAI1_CLK_ENABLE(); + } + SAI1_client ++; + + /**SAI1_A_Block_A GPIO Configuration + PE5 ------> SAI1_SCK_A + PE4 ------> SAI1_FS_A + PE6 ------> SAI1_SD_A + PG7 ------> SAI1_MCLK_A + */ + GPIO_InitStruct.Pin = SAI1_SCKA_Pin|SAI1_FSA_Pin|SAI1_SDA_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF6_SAI1; + HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = SAI1_MCLKA_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF6_SAI1; + HAL_GPIO_Init(SAI1_MCLKA_GPIO_Port, &GPIO_InitStruct); + + } + if(hsai->Instance==SAI1_Block_B) + { + /* Peripheral clock enable */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SAI1; + PeriphClkInitStruct.Sai1ClockSelection = RCC_SAI1CLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + if (SAI1_client == 0) + { + __HAL_RCC_SAI1_CLK_ENABLE(); + } + SAI1_client ++; + + /**SAI1_B_Block_B GPIO Configuration + PE3 ------> SAI1_SD_B + */ + GPIO_InitStruct.Pin = SAI1_SDB_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF6_SAI1; + HAL_GPIO_Init(SAI1_SDB_GPIO_Port, &GPIO_InitStruct); + + } +} + +void HAL_SAI_MspDeInit(SAI_HandleTypeDef* hsai) +{ +/* SAI1 */ + if(hsai->Instance==SAI1_Block_A) + { + SAI1_client --; + if (SAI1_client == 0) + { + /* Peripheral clock disable */ + __HAL_RCC_SAI1_CLK_DISABLE(); + } + + /**SAI1_A_Block_A GPIO Configuration + PE5 ------> SAI1_SCK_A + PE4 ------> SAI1_FS_A + PE6 ------> SAI1_SD_A + PG7 ------> SAI1_MCLK_A + */ + HAL_GPIO_DeInit(GPIOE, SAI1_SCKA_Pin|SAI1_FSA_Pin|SAI1_SDA_Pin); + + HAL_GPIO_DeInit(SAI1_MCLKA_GPIO_Port, SAI1_MCLKA_Pin); + + } + if(hsai->Instance==SAI1_Block_B) + { + SAI1_client --; + if (SAI1_client == 0) + { + /* Peripheral clock disable */ + __HAL_RCC_SAI1_CLK_DISABLE(); + } + + /**SAI1_B_Block_B GPIO Configuration + PE3 ------> SAI1_SD_B + */ + HAL_GPIO_DeInit(SAI1_SDB_GPIO_Port, SAI1_SDB_Pin); + + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_hal_timebase_tim.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_hal_timebase_tim.c new file mode 100644 index 0000000..e88a758 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_hal_timebase_tim.c @@ -0,0 +1,120 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_timebase_tim.c + * @brief HAL time base based on the hardware TIM. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" +#include "stm32h7xx_hal_tim.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +TIM_HandleTypeDef htim17; +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the TIM17 as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + RCC_ClkInitTypeDef clkconfig; + uint32_t uwTimclock; + + uint32_t uwPrescalerValue; + uint32_t pFLatency; + /*Configure the TIM17 IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(TIM17_IRQn, TickPriority ,0); + + /* Enable the TIM17 global Interrupt */ + HAL_NVIC_EnableIRQ(TIM17_IRQn); + uwTickPrio = TickPriority; + } + else + { + return HAL_ERROR; + } + + /* Enable TIM17 clock */ + __HAL_RCC_TIM17_CLK_ENABLE(); + /* Get clock configuration */ + HAL_RCC_GetClockConfig(&clkconfig, &pFLatency); + /* Compute TIM17 clock */ + uwTimclock = HAL_RCC_GetPCLK2Freq(); + + /* Compute the prescaler value to have TIM17 counter clock equal to 1MHz */ + uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U); + + /* Initialize TIM17 */ + htim17.Instance = TIM17; + + /* Initialize TIMx peripheral as follow: + + + Period = [(TIM17CLK/1000) - 1]. to have a (1/1000) s time base. + + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock. + + ClockDivision = 0 + + Counter direction = Up + */ + htim17.Init.Period = (1000000U / 1000U) - 1U; + htim17.Init.Prescaler = uwPrescalerValue; + htim17.Init.ClockDivision = 0; + htim17.Init.CounterMode = TIM_COUNTERMODE_UP; + + if(HAL_TIM_Base_Init(&htim17) == HAL_OK) + { + /* Start the TIM time Base generation in interrupt mode */ + return HAL_TIM_Base_Start_IT(&htim17); + } + + /* Return function status */ + return HAL_ERROR; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling TIM17 update interrupt. + * @param None + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable TIM17 update Interrupt */ + __HAL_TIM_DISABLE_IT(&htim17, TIM_IT_UPDATE); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by Enabling TIM17 update interrupt. + * @param None + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Enable TIM17 Update interrupt */ + __HAL_TIM_ENABLE_IT(&htim17, TIM_IT_UPDATE); +} + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_it.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_it.c new file mode 100644 index 0000000..183c972 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/CM7/Src/stm32h7xx_it.c @@ -0,0 +1,193 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32h7xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ +extern UART_HandleTypeDef huart1; +extern TIM_HandleTypeDef htim17; + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Pre-fetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32H7xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32h7xx.s). */ +/******************************************************************************/ + +/** + * @brief This function handles USART1 global interrupt. + */ +void USART1_IRQHandler(void) +{ + /* USER CODE BEGIN USART1_IRQn 0 */ + + /* USER CODE END USART1_IRQn 0 */ + HAL_UART_IRQHandler(&huart1); + /* USER CODE BEGIN USART1_IRQn 1 */ + + /* USER CODE END USART1_IRQn 1 */ +} + +/** + * @brief This function handles TIM17 global interrupt. + */ +void TIM17_IRQHandler(void) +{ + /* USER CODE BEGIN TIM17_IRQn 0 */ + + /* USER CODE END TIM17_IRQn 0 */ + HAL_TIM_IRQHandler(&htim17); + /* USER CODE BEGIN TIM17_IRQn 1 */ + + /* USER CODE END TIM17_IRQn 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Common/Src/system_stm32h7xx_dualcore_boot_cm4_cm7.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Common/Src/system_stm32h7xx_dualcore_boot_cm4_cm7.c new file mode 100644 index 0000000..2d0b59e --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Common/Src/system_stm32h7xx_dualcore_boot_cm4_cm7.c @@ -0,0 +1,420 @@ +/** + ****************************************************************************** + * @file system_stm32h7xx_dualcore_boot_cm4_cm7.c + * @author MCD Application Team + * @brief CMSIS Cortex-Mx Device Peripheral Access Layer System Source File. + * This provides system initialization template function is case of + * an application using a dual core STM32H7 device where + * Cortex-M7 and Cortex-M4 boot are enabled at the FLASH option bytes + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32h7xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock, it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32h7xx_system + * @{ + */ + +/** @addtogroup STM32H7xx_System_Private_Includes + * @{ + */ + +#include "stm32h7xx.h" +#include + +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate the vector table + anywhere in FLASH BANK1 or AXI SRAM, else the vector table is kept at the automatic + remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ + +#if defined(USER_VECT_TAB_ADDRESS) +#if defined(CORE_CM4) +/*!< Uncomment the following line if you need to relocate your vector Table + in D2 AXI SRAM else user remap will be done in FLASH BANK2. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS D2_AXISRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BANK2_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#endif /* VECT_TAB_SRAM */ +#elif defined(CORE_CM7) +/*!< Uncomment the following line if you need to relocate your vector Table + in D1 AXI SRAM else user remap will be done in FLASH BANK1. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS D1_AXISRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BANK1_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#endif /* VECT_TAB_SRAM */ +#else +#error Please #define CORE_CM4 or CORE_CM7 +#endif /* CORE_CM4 */ +#endif /* USER_VECT_TAB_ADDRESS */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 64000000; + uint32_t SystemD2Clock = 64000000; + const uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting and vector table location + * configuration. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */ + #endif + + /*SEVONPEND enabled so that an interrupt coming from the CPU(n) interrupt signal is + detectable by the CPU after a WFI/WFE instruction.*/ + SCB->SCR |= SCB_SCR_SEVONPEND_Msk; + +#if defined(CORE_CM7) + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Increasing the CPU frequency */ + if(FLASH_LATENCY_DEFAULT > (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT)); + } + + /* Set HSION bit */ + RCC->CR |= RCC_CR_HSION; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, HSECSSON, CSION, HSI48ON, CSIKERON, PLL1ON, PLL2ON and PLL3ON bits */ + RCC->CR &= 0xEAF6ED7FU; + + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLASH_LATENCY_DEFAULT < (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT)); + } + + /* Reset D1CFGR register */ + RCC->D1CFGR = 0x00000000; + + /* Reset D2CFGR register */ + RCC->D2CFGR = 0x00000000; + + /* Reset D3CFGR register */ + RCC->D3CFGR = 0x00000000; + + /* Reset PLLCKSELR register */ + RCC->PLLCKSELR = 0x02020200; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x01FF0000; + /* Reset PLL1DIVR register */ + RCC->PLL1DIVR = 0x01010280; + /* Reset PLL1FRACR register */ + RCC->PLL1FRACR = 0x00000000; + + /* Reset PLL2DIVR register */ + RCC->PLL2DIVR = 0x01010280; + + /* Reset PLL2FRACR register */ + + RCC->PLL2FRACR = 0x00000000; + /* Reset PLL3DIVR register */ + RCC->PLL3DIVR = 0x01010280; + + /* Reset PLL3FRACR register */ + RCC->PLL3FRACR = 0x00000000; + + /* Reset HSEBYP bit */ + RCC->CR &= 0xFFFBFFFFU; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000; + + /* Enable CortexM7 HSEM EXTI line (line 78)*/ + EXTI_D2->EMR3 |= 0x4000UL; + + if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U) + { + /* if stm32h7 revY*/ + /* Change the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */ + *((__IO uint32_t*)0x51008108) = 0x000000001U; + } + +#endif /* CORE_CM7*/ + +#if defined(CORE_CM4) + /* Configure the Vector Table location add offset address for cortex-M4 ------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D2 AXI-RAM or in Internal FLASH */ +#endif /* USER_VECT_TAB_ADDRESS */ + +#elif defined(CORE_CM7) + /* + * Disable the FMC bank1 (enabled after reset). + * This, prevents CPU speculation access on this bank which blocks the use of FMC during + * 24us. During this time the others FMC master (such as LTDC) cannot use it! + */ + FMC_Bank1_R->BTCR[0] = 0x000030D2; + + /* Configure the Vector Table location -------------------------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D1 AXI-RAM or in Internal FLASH */ +#endif /* USER_VECT_TAB_ADDRESS */ + +#else +#error Please #define CORE_CM4 or CORE_CM7 +#endif /* CORE_CM4 */ +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock , it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*) + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*), + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * + * (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp; + uint32_t common_system_clock; + float_t fracn1, pllvco; + + /* Get SYSCLK source -------------------------------------------------------*/ + + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)); + break; + + case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */ + common_system_clock = CSI_VALUE; + break; + + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + common_system_clock = HSE_VALUE; + break; + + case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4) ; + pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos); + fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3)); + + if (pllm != 0U) + { + switch (pllsource) + { + case RCC_PLLCKSELR_PLLSRC_HSI: /* HSI used as PLL clock source */ + + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ; + pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + + break; + + case RCC_PLLCKSELR_PLLSRC_CSI: /* CSI used as PLL clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + case RCC_PLLCKSELR_PLLSRC_HSE: /* HSE used as PLL clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + default: + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ; + pllvco = ((float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + } + pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ; + common_system_clock = (uint32_t)(float_t)(pllvco/(float_t)pllp); + } + else + { + common_system_clock = 0U; + } + break; + + default: + common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)); + break; + } + + /* Compute SystemClock frequency --------------------------------------------------*/ + tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos]; + + /* common_system_clock frequency : CM7 CPU frequency */ + common_system_clock >>= tmp; + + /* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency */ + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); + +#if defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* CORE_CM4 */ +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h747xx.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h747xx.h new file mode 100644 index 0000000..dc32f93 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h747xx.h @@ -0,0 +1,30534 @@ +/** + ****************************************************************************** + * @file stm32h747xx.h + * @author MCD Application Team + * @brief CMSIS STM32H747xx Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32h747xx + * @{ + */ + +#ifndef STM32H747xx_H +#define STM32H747xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32H7XX Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum +{ +/****** Cortex-M Processor Exceptions Numbers *****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt ( wwdg1_it, wwdg2_it) */ + PVD_AVD_IRQn = 1, /*!< PVD/AVD through EXTI Line detection Interrupt */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ + DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ + DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ + DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ + DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ + DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ + DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ + ADC_IRQn = 18, /*!< ADC1 and ADC2 global Interrupts */ + FDCAN1_IT0_IRQn = 19, /*!< FDCAN1 Interrupt line 0 */ + FDCAN2_IT0_IRQn = 20, /*!< FDCAN2 Interrupt line 0 */ + FDCAN1_IT1_IRQn = 21, /*!< FDCAN1 Interrupt line 1 */ + FDCAN2_IT1_IRQn = 22, /*!< FDCAN2 Interrupt line 1 */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + FDCAN_CAL_IRQn = 63, /*!< FDCAN Calibration unit Interrupt */ + CM7_SEV_IRQn = 64, /*!< CM7 Send event interrupt for CM4 */ + CM4_SEV_IRQn = 65, /*!< CM4 Send event interrupt for CM7 */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + RNG_IRQn = 80, /*!< RNG global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90, /*!< DMA2D global Interrupt */ + SAI2_IRQn = 91, /*!< SAI2 global Interrupt */ + QUADSPI_IRQn = 92, /*!< Quad SPI global interrupt */ + LPTIM1_IRQn = 93, /*!< LP TIM1 interrupt */ + CEC_IRQn = 94, /*!< HDMI-CEC global Interrupt */ + I2C4_EV_IRQn = 95, /*!< I2C4 Event Interrupt */ + I2C4_ER_IRQn = 96, /*!< I2C4 Error Interrupt */ + SPDIF_RX_IRQn = 97, /*!< SPDIF-RX global Interrupt */ + OTG_FS_EP1_OUT_IRQn = 98, /*!< USB OTG HS2 global interrupt */ + OTG_FS_EP1_IN_IRQn = 99, /*!< USB OTG HS2 End Point 1 Out global interrupt */ + OTG_FS_WKUP_IRQn = 100, /*!< USB OTG HS2 End Point 1 In global interrupt */ + OTG_FS_IRQn = 101, /*!< USB OTG HS2 Wakeup through EXTI interrupt */ + DMAMUX1_OVR_IRQn = 102, /*! + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */ + __IO uint32_t PCSEL; /*!< ADC pre-channel selection, Address offset: 0x1C */ + __IO uint32_t LTR1; /*!< ADC watchdog Lower threshold register 1, Address offset: 0x20 */ + __IO uint32_t HTR1; /*!< ADC watchdog higher threshold register 1, Address offset: 0x24 */ + uint32_t RESERVED1; /*!< Reserved, 0x028 */ + uint32_t RESERVED2; /*!< Reserved, 0x02C */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x044 */ + uint32_t RESERVED4; /*!< Reserved, 0x048 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t LTR2; /*!< ADC watchdog Lower threshold register 2, Address offset: 0xB0 */ + __IO uint32_t HTR2; /*!< ADC watchdog Higher threshold register 2, Address offset: 0xB4 */ + __IO uint32_t LTR3; /*!< ADC watchdog Lower threshold register 3, Address offset: 0xB8 */ + __IO uint32_t HTR3; /*!< ADC watchdog Higher threshold register 3, Address offset: 0xBC */ + __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xC0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xC4 */ + __IO uint32_t CALFACT2; /*!< ADC Linearity Calibration Factors, Address offset: 0xC8 */ +} ADC_TypeDef; + + +typedef struct +{ +__IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */ +uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */ +__IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */ +__IO uint32_t CDR; /*!< ADC common regular data register for dual Address offset: ADC1/3 base address + 0x30C */ +__IO uint32_t CDR2; /*!< ADC common regular data register for 32-bit dual mode Address offset: ADC1/3 base address + 0x310 */ + +} ADC_Common_TypeDef; + +/** + * @brief ART + */ + +typedef struct +{ + __IO uint32_t CTR; /*!< ART accelerator - control register */ +}ART_TypeDef; + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + + +/** + * @brief FD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + __IO uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + __IO uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + __IO uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + __IO uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t GFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t SIDFC; /*!< FDCAN Standard ID Filter Configuration register, Address offset: 0x084 */ + __IO uint32_t XIDFC; /*!< FDCAN Extended ID Filter Configuration register, Address offset: 0x088 */ + __IO uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x090 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x094 */ + __IO uint32_t NDAT1; /*!< FDCAN New Data 1 register, Address offset: 0x098 */ + __IO uint32_t NDAT2; /*!< FDCAN New Data 2 register, Address offset: 0x09C */ + __IO uint32_t RXF0C; /*!< FDCAN Rx FIFO 0 Configuration register, Address offset: 0x0A0 */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x0A4 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x0A8 */ + __IO uint32_t RXBC; /*!< FDCAN Rx Buffer Configuration register, Address offset: 0x0AC */ + __IO uint32_t RXF1C; /*!< FDCAN Rx FIFO 1 Configuration register, Address offset: 0x0B0 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x0B4 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x0B8 */ + __IO uint32_t RXESC; /*!< FDCAN Rx Buffer/FIFO Element Size Configuration register, Address offset: 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXESC; /*!< FDCAN Tx Buffer Element Size Configuration register, Address offset: 0x0C8 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0CC */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D4 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D8 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0DC */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E4 */ + __IO uint32_t RESERVED6[2]; /*!< Reserved, 0x0E8 - 0x0EC */ + __IO uint32_t TXEFC; /*!< FDCAN Tx Event FIFO Configuration register, Address offset: 0x0F0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0F4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0F8 */ + __IO uint32_t RESERVED7; /*!< Reserved, 0x0FC */ +} FDCAN_GlobalTypeDef; + +/** + * @brief TTFD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t TTTMC; /*!< TT Trigger Memory Configuration register, Address offset: 0x100 */ + __IO uint32_t TTRMC; /*!< TT Reference Message Configuration register, Address offset: 0x104 */ + __IO uint32_t TTOCF; /*!< TT Operation Configuration register, Address offset: 0x108 */ + __IO uint32_t TTMLM; /*!< TT Matrix Limits register, Address offset: 0x10C */ + __IO uint32_t TURCF; /*!< TUR Configuration register, Address offset: 0x110 */ + __IO uint32_t TTOCN; /*!< TT Operation Control register, Address offset: 0x114 */ + __IO uint32_t TTGTP; /*!< TT Global Time Preset register, Address offset: 0x118 */ + __IO uint32_t TTTMK; /*!< TT Time Mark register, Address offset: 0x11C */ + __IO uint32_t TTIR; /*!< TT Interrupt register, Address offset: 0x120 */ + __IO uint32_t TTIE; /*!< TT Interrupt Enable register, Address offset: 0x124 */ + __IO uint32_t TTILS; /*!< TT Interrupt Line Select register, Address offset: 0x128 */ + __IO uint32_t TTOST; /*!< TT Operation Status register, Address offset: 0x12C */ + __IO uint32_t TURNA; /*!< TT TUR Numerator Actual register, Address offset: 0x130 */ + __IO uint32_t TTLGT; /*!< TT Local and Global Time register, Address offset: 0x134 */ + __IO uint32_t TTCTC; /*!< TT Cycle Time and Count register, Address offset: 0x138 */ + __IO uint32_t TTCPT; /*!< TT Capture Time register, Address offset: 0x13C */ + __IO uint32_t TTCSM; /*!< TT Cycle Sync Mark register, Address offset: 0x140 */ + __IO uint32_t RESERVED1[111]; /*!< Reserved, 0x144 - 0x2FC */ + __IO uint32_t TTTS; /*!< TT Trigger Select register, Address offset: 0x300 */ +} TTCAN_TypeDef; + +/** + * @brief FD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t CREL; /*!< Clock Calibration Unit Core Release register, Address offset: 0x00 */ + __IO uint32_t CCFG; /*!< Calibration Configuration register, Address offset: 0x04 */ + __IO uint32_t CSTAT; /*!< Calibration Status register, Address offset: 0x08 */ + __IO uint32_t CWD; /*!< Calibration Watchdog register, Address offset: 0x0C */ + __IO uint32_t IR; /*!< CCU Interrupt register, Address offset: 0x10 */ + __IO uint32_t IE; /*!< CCU Interrupt Enable register, Address offset: 0x14 */ +} FDCAN_ClockCalibrationUnit_TypeDef; + + +/** + * @brief Consumer Electronics Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief DFSDM module registers + */ +typedef struct +{ + __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */ + __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */ + __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ + __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ + __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ + __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */ + __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ + __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ + __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ + __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ + __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ + __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ + __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ + __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ + __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ +} DFSDM_Filter_TypeDef; + +/** + * @brief DFSDM channel configuration registers + */ +typedef struct +{ + __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ + __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ + __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and + short circuit detector register, Address offset: 0x08 */ + __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ + __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ +} DFSDM_Channel_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t RESERVED4[11]; /*!< Reserved, Address offset: 0x08 */ + __IO uint32_t APB3FZ1; /*!< Debug MCU APB3FZ1 freeze register, Address offset: 0x34 */ + __IO uint32_t APB3FZ2; /*!< Debug MCU APB3FZ2 freeze register, Address offset: 0x38 */ + __IO uint32_t APB1LFZ1; /*!< Debug MCU APB1LFZ1 freeze register, Address offset: 0x3C */ + __IO uint32_t APB1LFZ2; /*!< Debug MCU APB1LFZ2 freeze register, Address offset: 0x40 */ + __IO uint32_t APB1HFZ1; /*!< Debug MCU APB1LFZ1 freeze register, Address offset: 0x44 */ + __IO uint32_t APB1HFZ2; /*!< Debug MCU APB1LFZ2 freeze register, Address offset: 0x48 */ + __IO uint32_t APB2FZ1; /*!< Debug MCU APB2FZ1 freeze register, Address offset: 0x4C */ + __IO uint32_t APB2FZ2; /*!< Debug MCU APB2FZ2 freeze register, Address offset: 0x50 */ + __IO uint32_t APB4FZ1; /*!< Debug MCU APB4FZ1 freeze register, Address offset: 0x54 */ + __IO uint32_t APB4FZ2; /*!< Debug MCU APB4FZ2 freeze register, Address offset: 0x58 */ + +}DBGMCU_TypeDef; +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA stream x configuration register */ + __IO uint32_t NDTR; /*!< DMA stream x number of data register */ + __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ + __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ + __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ + __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ +} DMA_Stream_TypeDef; + +typedef struct +{ + __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ + __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ + __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ + __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CM0AR; /*!< DMA channel x memory 0 address register */ + __IO uint32_t CM1AR; /*!< DMA channel x memory 1 address register */ +} BDMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} BDMA_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief MDMA Controller + */ +typedef struct +{ + __IO uint32_t GISR0; /*!< MDMA Global Interrupt/Status Register 0, Address offset: 0x00 */ +}MDMA_TypeDef; + +typedef struct +{ + __IO uint32_t CISR; /*!< MDMA channel x interrupt/status register, Address offset: 0x40 */ + __IO uint32_t CIFCR; /*!< MDMA channel x interrupt flag clear register, Address offset: 0x44 */ + __IO uint32_t CESR; /*!< MDMA Channel x error status register, Address offset: 0x48 */ + __IO uint32_t CCR; /*!< MDMA channel x control register, Address offset: 0x4C */ + __IO uint32_t CTCR; /*!< MDMA channel x Transfer Configuration register, Address offset: 0x50 */ + __IO uint32_t CBNDTR; /*!< MDMA Channel x block number of data register, Address offset: 0x54 */ + __IO uint32_t CSAR; /*!< MDMA channel x source address register, Address offset: 0x58 */ + __IO uint32_t CDAR; /*!< MDMA channel x destination address register, Address offset: 0x5C */ + __IO uint32_t CBRUR; /*!< MDMA channel x Block Repeat address Update register, Address offset: 0x60 */ + __IO uint32_t CLAR; /*!< MDMA channel x Link Address register, Address offset: 0x64 */ + __IO uint32_t CTBR; /*!< MDMA channel x Trigger and Bus selection Register, Address offset: 0x68 */ + uint32_t RESERVED0; /*!< Reserved, 0x6C */ + __IO uint32_t CMAR; /*!< MDMA channel x Mask address register, Address offset: 0x70 */ + __IO uint32_t CMDR; /*!< MDMA channel x Mask Data register, Address offset: 0x74 */ +}MDMA_Channel_TypeDef; + +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ +} DMA2D_TypeDef; + +/** + * @brief DSI Controller + */ + +typedef struct +{ + __IO uint32_t VR; /*!< DSI Host Version Register, Address offset: 0x00 */ + __IO uint32_t CR; /*!< DSI Host Control Register, Address offset: 0x04 */ + __IO uint32_t CCR; /*!< DSI HOST Clock Control Register, Address offset: 0x08 */ + __IO uint32_t LVCIDR; /*!< DSI Host LTDC VCID Register, Address offset: 0x0C */ + __IO uint32_t LCOLCR; /*!< DSI Host LTDC Color Coding Register, Address offset: 0x10 */ + __IO uint32_t LPCR; /*!< DSI Host LTDC Polarity Configuration Register, Address offset: 0x14 */ + __IO uint32_t LPMCR; /*!< DSI Host Low-Power Mode Configuration Register, Address offset: 0x18 */ + uint32_t RESERVED0[4]; /*!< Reserved, 0x1C - 0x2B */ + __IO uint32_t PCR; /*!< DSI Host Protocol Configuration Register, Address offset: 0x2C */ + __IO uint32_t GVCIDR; /*!< DSI Host Generic VCID Register, Address offset: 0x30 */ + __IO uint32_t MCR; /*!< DSI Host Mode Configuration Register, Address offset: 0x34 */ + __IO uint32_t VMCR; /*!< DSI Host Video Mode Configuration Register, Address offset: 0x38 */ + __IO uint32_t VPCR; /*!< DSI Host Video Packet Configuration Register, Address offset: 0x3C */ + __IO uint32_t VCCR; /*!< DSI Host Video Chunks Configuration Register, Address offset: 0x40 */ + __IO uint32_t VNPCR; /*!< DSI Host Video Null Packet Configuration Register, Address offset: 0x44 */ + __IO uint32_t VHSACR; /*!< DSI Host Video HSA Configuration Register, Address offset: 0x48 */ + __IO uint32_t VHBPCR; /*!< DSI Host Video HBP Configuration Register, Address offset: 0x4C */ + __IO uint32_t VLCR; /*!< DSI Host Video Line Configuration Register, Address offset: 0x50 */ + __IO uint32_t VVSACR; /*!< DSI Host Video VSA Configuration Register, Address offset: 0x54 */ + __IO uint32_t VVBPCR; /*!< DSI Host Video VBP Configuration Register, Address offset: 0x58 */ + __IO uint32_t VVFPCR; /*!< DSI Host Video VFP Configuration Register, Address offset: 0x5C */ + __IO uint32_t VVACR; /*!< DSI Host Video VA Configuration Register, Address offset: 0x60 */ + __IO uint32_t LCCR; /*!< DSI Host LTDC Command Configuration Register, Address offset: 0x64 */ + __IO uint32_t CMCR; /*!< DSI Host Command Mode Configuration Register, Address offset: 0x68 */ + __IO uint32_t GHCR; /*!< DSI Host Generic Header Configuration Register, Address offset: 0x6C */ + __IO uint32_t GPDR; /*!< DSI Host Generic Payload Data Register, Address offset: 0x70 */ + __IO uint32_t GPSR; /*!< DSI Host Generic Packet Status Register, Address offset: 0x74 */ + __IO uint32_t TCCR[6]; /*!< DSI Host Timeout Counter Configuration Register, Address offset: 0x78-0x8F */ + __IO uint32_t TDCR; /*!< DSI Host 3D Configuration Register, Address offset: 0x90 */ + __IO uint32_t CLCR; /*!< DSI Host Clock Lane Configuration Register, Address offset: 0x94 */ + __IO uint32_t CLTCR; /*!< DSI Host Clock Lane Timer Configuration Register, Address offset: 0x98 */ + __IO uint32_t DLTCR; /*!< DSI Host Data Lane Timer Configuration Register, Address offset: 0x9C */ + __IO uint32_t PCTLR; /*!< DSI Host PHY Control Register, Address offset: 0xA0 */ + __IO uint32_t PCONFR; /*!< DSI Host PHY Configuration Register, Address offset: 0xA4 */ + __IO uint32_t PUCR; /*!< DSI Host PHY ULPS Control Register, Address offset: 0xA8 */ + __IO uint32_t PTTCR; /*!< DSI Host PHY TX Triggers Configuration Register, Address offset: 0xAC */ + __IO uint32_t PSR; /*!< DSI Host PHY Status Register, Address offset: 0xB0 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0xB4 - 0xBB */ + __IO uint32_t ISR[2]; /*!< DSI Host Interrupt & Status Register, Address offset: 0xBC-0xC3 */ + __IO uint32_t IER[2]; /*!< DSI Host Interrupt Enable Register, Address offset: 0xC4-0xCB */ + uint32_t RESERVED2[3]; /*!< Reserved, 0xD0 - 0xD7 */ + __IO uint32_t FIR[2]; /*!< DSI Host Force Interrupt Register, Address offset: 0xD8-0xDF */ + uint32_t RESERVED3[8]; /*!< Reserved, 0xE0 - 0xFF */ + __IO uint32_t VSCR; /*!< DSI Host Video Shadow Control Register, Address offset: 0x100 */ + uint32_t RESERVED4[2]; /*!< Reserved, 0x104 - 0x10B */ + __IO uint32_t LCVCIDR; /*!< DSI Host LTDC Current VCID Register, Address offset: 0x10C */ + __IO uint32_t LCCCR; /*!< DSI Host LTDC Current Color Coding Register, Address offset: 0x110 */ + uint32_t RESERVED5; /*!< Reserved, 0x114 */ + __IO uint32_t LPMCCR; /*!< DSI Host Low-power Mode Current Configuration Register, Address offset: 0x118 */ + uint32_t RESERVED6[7]; /*!< Reserved, 0x11C - 0x137 */ + __IO uint32_t VMCCR; /*!< DSI Host Video Mode Current Configuration Register, Address offset: 0x138 */ + __IO uint32_t VPCCR; /*!< DSI Host Video Packet Current Configuration Register, Address offset: 0x13C */ + __IO uint32_t VCCCR; /*!< DSI Host Video Chunks Current Configuration Register, Address offset: 0x140 */ + __IO uint32_t VNPCCR; /*!< DSI Host Video Null Packet Current Configuration Register, Address offset: 0x144 */ + __IO uint32_t VHSACCR; /*!< DSI Host Video HSA Current Configuration Register, Address offset: 0x148 */ + __IO uint32_t VHBPCCR; /*!< DSI Host Video HBP Current Configuration Register, Address offset: 0x14C */ + __IO uint32_t VLCCR; /*!< DSI Host Video Line Current Configuration Register, Address offset: 0x150 */ + __IO uint32_t VVSACCR; /*!< DSI Host Video VSA Current Configuration Register, Address offset: 0x154 */ + __IO uint32_t VVBPCCR; /*!< DSI Host Video VBP Current Configuration Register, Address offset: 0x158 */ + __IO uint32_t VVFPCCR; /*!< DSI Host Video VFP Current Configuration Register, Address offset: 0x15C */ + __IO uint32_t VVACCR; /*!< DSI Host Video VA Current Configuration Register, Address offset: 0x160 */ + uint32_t RESERVED7[11]; /*!< Reserved, 0x164 - 0x18F */ + __IO uint32_t TDCCR; /*!< DSI Host 3D Current Configuration Register, Address offset: 0x190 */ + uint32_t RESERVED8[155]; /*!< Reserved, 0x194 - 0x3FF */ + __IO uint32_t WCFGR; /*!< DSI Wrapper Configuration Register, Address offset: 0x400 */ + __IO uint32_t WCR; /*!< DSI Wrapper Control Register, Address offset: 0x404 */ + __IO uint32_t WIER; /*!< DSI Wrapper Interrupt Enable Register, Address offset: 0x408 */ + __IO uint32_t WISR; /*!< DSI Wrapper Interrupt and Status Register, Address offset: 0x40C */ + __IO uint32_t WIFCR; /*!< DSI Wrapper Interrupt Flag Clear Register, Address offset: 0x410 */ + uint32_t RESERVED9; /*!< Reserved, 0x414 */ + __IO uint32_t WPCR[5]; /*!< DSI Wrapper PHY Configuration Register, Address offset: 0x418-0x42B */ + uint32_t RESERVED10; /*!< Reserved, 0x42C */ + __IO uint32_t WRPCR; /*!< DSI Wrapper Regulator and PLL Control Register, Address offset: 0x430 */ +} DSI_TypeDef; + +/** + * @brief Ethernet MAC + */ +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACECR; + __IO uint32_t MACPFR; + __IO uint32_t MACWTR; + __IO uint32_t MACHT0R; + __IO uint32_t MACHT1R; + uint32_t RESERVED1[14]; + __IO uint32_t MACVTR; + uint32_t RESERVED2; + __IO uint32_t MACVHTR; + uint32_t RESERVED3; + __IO uint32_t MACVIR; + __IO uint32_t MACIVIR; + uint32_t RESERVED4[2]; + __IO uint32_t MACTFCR; + uint32_t RESERVED5[7]; + __IO uint32_t MACRFCR; + uint32_t RESERVED6[7]; + __IO uint32_t MACISR; + __IO uint32_t MACIER; + __IO uint32_t MACRXTXSR; + uint32_t RESERVED7; + __IO uint32_t MACPCSR; + __IO uint32_t MACRWKPFR; + uint32_t RESERVED8[2]; + __IO uint32_t MACLCSR; + __IO uint32_t MACLTCR; + __IO uint32_t MACLETR; + __IO uint32_t MAC1USTCR; + uint32_t RESERVED9[12]; + __IO uint32_t MACVR; + __IO uint32_t MACDR; + uint32_t RESERVED10; + __IO uint32_t MACHWF0R; + __IO uint32_t MACHWF1R; + __IO uint32_t MACHWF2R; + uint32_t RESERVED11[54]; + __IO uint32_t MACMDIOAR; + __IO uint32_t MACMDIODR; + uint32_t RESERVED12[2]; + __IO uint32_t MACARPAR; + uint32_t RESERVED13[59]; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; + uint32_t RESERVED14[248]; + __IO uint32_t MMCCR; + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; + uint32_t RESERVED15[14]; + __IO uint32_t MMCTSCGPR; + __IO uint32_t MMCTMCGPR; + uint32_t RESERVED16[5]; + __IO uint32_t MMCTPCGR; + uint32_t RESERVED17[10]; + __IO uint32_t MMCRCRCEPR; + __IO uint32_t MMCRAEPR; + uint32_t RESERVED18[10]; + __IO uint32_t MMCRUPGR; + uint32_t RESERVED19[9]; + __IO uint32_t MMCTLPIMSTR; + __IO uint32_t MMCTLPITCR; + __IO uint32_t MMCRLPIMSTR; + __IO uint32_t MMCRLPITCR; + uint32_t RESERVED20[65]; + __IO uint32_t MACL3L4C0R; + __IO uint32_t MACL4A0R; + uint32_t RESERVED21[2]; + __IO uint32_t MACL3A0R0R; + __IO uint32_t MACL3A1R0R; + __IO uint32_t MACL3A2R0R; + __IO uint32_t MACL3A3R0R; + uint32_t RESERVED22[4]; + __IO uint32_t MACL3L4C1R; + __IO uint32_t MACL4A1R; + uint32_t RESERVED23[2]; + __IO uint32_t MACL3A0R1R; + __IO uint32_t MACL3A1R1R; + __IO uint32_t MACL3A2R1R; + __IO uint32_t MACL3A3R1R; + uint32_t RESERVED24[108]; + __IO uint32_t MACTSCR; + __IO uint32_t MACSSIR; + __IO uint32_t MACSTSR; + __IO uint32_t MACSTNR; + __IO uint32_t MACSTSUR; + __IO uint32_t MACSTNUR; + __IO uint32_t MACTSAR; + uint32_t RESERVED25; + __IO uint32_t MACTSSR; + uint32_t RESERVED26[3]; + __IO uint32_t MACTTSSNR; + __IO uint32_t MACTTSSSR; + uint32_t RESERVED27[2]; + __IO uint32_t MACACR; + uint32_t RESERVED28; + __IO uint32_t MACATSNR; + __IO uint32_t MACATSSR; + __IO uint32_t MACTSIACR; + __IO uint32_t MACTSEACR; + __IO uint32_t MACTSICNR; + __IO uint32_t MACTSECNR; + uint32_t RESERVED29[4]; + __IO uint32_t MACPPSCR; + uint32_t RESERVED30[3]; + __IO uint32_t MACPPSTTSR; + __IO uint32_t MACPPSTTNR; + __IO uint32_t MACPPSIR; + __IO uint32_t MACPPSWR; + uint32_t RESERVED31[12]; + __IO uint32_t MACPOCR; + __IO uint32_t MACSPI0R; + __IO uint32_t MACSPI1R; + __IO uint32_t MACSPI2R; + __IO uint32_t MACLMIR; + uint32_t RESERVED32[11]; + __IO uint32_t MTLOMR; + uint32_t RESERVED33[7]; + __IO uint32_t MTLISR; + uint32_t RESERVED34[55]; + __IO uint32_t MTLTQOMR; + __IO uint32_t MTLTQUR; + __IO uint32_t MTLTQDR; + uint32_t RESERVED35[8]; + __IO uint32_t MTLQICSR; + __IO uint32_t MTLRQOMR; + __IO uint32_t MTLRQMPOCR; + __IO uint32_t MTLRQDR; + uint32_t RESERVED36[177]; + __IO uint32_t DMAMR; + __IO uint32_t DMASBMR; + __IO uint32_t DMAISR; + __IO uint32_t DMADSR; + uint32_t RESERVED37[60]; + __IO uint32_t DMACCR; + __IO uint32_t DMACTCR; + __IO uint32_t DMACRCR; + uint32_t RESERVED38[2]; + __IO uint32_t DMACTDLAR; + uint32_t RESERVED39; + __IO uint32_t DMACRDLAR; + __IO uint32_t DMACTDTPR; + uint32_t RESERVED40; + __IO uint32_t DMACRDTPR; + __IO uint32_t DMACTDRLR; + __IO uint32_t DMACRDRLR; + __IO uint32_t DMACIER; + __IO uint32_t DMACRIWTR; +__IO uint32_t DMACSFCSR; + uint32_t RESERVED41; + __IO uint32_t DMACCATDR; + uint32_t RESERVED42; + __IO uint32_t DMACCARDR; + uint32_t RESERVED43; + __IO uint32_t DMACCATBR; + uint32_t RESERVED44; + __IO uint32_t DMACCARBR; + __IO uint32_t DMACSR; +uint32_t RESERVED45[2]; +__IO uint32_t DMACMFCR; +}ETH_TypeDef; +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ +__IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register, Address offset: 0x00 */ +__IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register, Address offset: 0x04 */ +__IO uint32_t SWIER1; /*!< EXTI Software interrupt event register, Address offset: 0x08 */ +__IO uint32_t D3PMR1; /*!< EXTI D3 Pending mask register, (same register as to SRDPMR1) Address offset: 0x0C */ +__IO uint32_t D3PCR1L; /*!< EXTI D3 Pending clear selection register low, (same register as to SRDPCR1L) Address offset: 0x10 */ +__IO uint32_t D3PCR1H; /*!< EXTI D3 Pending clear selection register High, (same register as to SRDPCR1H) Address offset: 0x14 */ +uint32_t RESERVED1[2]; /*!< Reserved, 0x18 to 0x1C */ +__IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register, Address offset: 0x20 */ +__IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register, Address offset: 0x24 */ +__IO uint32_t SWIER2; /*!< EXTI Software interrupt event register, Address offset: 0x28 */ +__IO uint32_t D3PMR2; /*!< EXTI D3 Pending mask register, (same register as to SRDPMR2) Address offset: 0x2C */ +__IO uint32_t D3PCR2L; /*!< EXTI D3 Pending clear selection register low, (same register as to SRDPCR2L) Address offset: 0x30 */ +__IO uint32_t D3PCR2H; /*!< EXTI D3 Pending clear selection register High, (same register as to SRDPCR2H) Address offset: 0x34 */ +uint32_t RESERVED2[2]; /*!< Reserved, 0x38 to 0x3C */ +__IO uint32_t RTSR3; /*!< EXTI Rising trigger selection register, Address offset: 0x40 */ +__IO uint32_t FTSR3; /*!< EXTI Falling trigger selection register, Address offset: 0x44 */ +__IO uint32_t SWIER3; /*!< EXTI Software interrupt event register, Address offset: 0x48 */ +__IO uint32_t D3PMR3; /*!< EXTI D3 Pending mask register, (same register as to SRDPMR3) Address offset: 0x4C */ +__IO uint32_t D3PCR3L; /*!< EXTI D3 Pending clear selection register low, (same register as to SRDPCR3L) Address offset: 0x50 */ +__IO uint32_t D3PCR3H; /*!< EXTI D3 Pending clear selection register High, (same register as to SRDPCR3H) Address offset: 0x54 */ +uint32_t RESERVED3[10]; /*!< Reserved, 0x58 to 0x7C */ +__IO uint32_t IMR1; /*!< EXTI Interrupt mask register, Address offset: 0x80 */ +__IO uint32_t EMR1; /*!< EXTI Event mask register, Address offset: 0x84 */ +__IO uint32_t PR1; /*!< EXTI Pending register, Address offset: 0x88 */ +uint32_t RESERVED4; /*!< Reserved, 0x8C */ +__IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x90 */ +__IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x94 */ +__IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x98 */ +uint32_t RESERVED5; /*!< Reserved, 0x9C */ +__IO uint32_t IMR3; /*!< EXTI Interrupt mask register, Address offset: 0xA0 */ +__IO uint32_t EMR3; /*!< EXTI Event mask register, Address offset: 0xA4 */ +__IO uint32_t PR3; /*!< EXTI Pending register, Address offset: 0xA8 */ +uint32_t RESERVED6[5]; /*!< Reserved, 0xAC to 0xBC */ +__IO uint32_t C2IMR1; /*!< EXTI Interrupt mask register, Address offset: 0xC0 */ +__IO uint32_t C2EMR1; /*!< EXTI Event mask register, Address offset: 0xC4 */ +__IO uint32_t C2PR1; /*!< EXTI Pending register, Address offset: 0xC8 */ +uint32_t RESERVED7; /*!< Reserved, 0xCC */ +__IO uint32_t C2IMR2; /*!< EXTI Interrupt mask register, Address offset: 0xD0 */ +__IO uint32_t C2EMR2; /*!< EXTI Event mask register, Address offset: 0xD4 */ +__IO uint32_t C2PR2; /*!< EXTI Pending register, Address offset: 0xD8 */ +uint32_t RESERVED8; /*!< Reserved, 0xDC */ +__IO uint32_t C2IMR3; /*!< EXTI Interrupt mask register, Address offset: 0xE0 */ +__IO uint32_t C2EMR3; /*!< EXTI Event mask register, Address offset: 0xE4 */ +__IO uint32_t C2PR3; /*!< EXTI Pending register, Address offset: 0xE8 */ + +}EXTI_TypeDef; + +/** + * @brief This structure registers corresponds to EXTI_Typdef CPU1/CPU2 registers subset (IMRx, EMRx and PRx), allowing to define EXTI_D1/EXTI_D2 + * with rapid/common access to these IMRx, EMRx, PRx registers for CPU1 and CPU2. + * Note that EXTI_D1 and EXTI_D2 bases addresses are calculated to point to CPUx first register: + * IMR1 in case of EXTI_D1 that is addressing CPU1 (Cortex-M7) + * C2IMR1 in case of EXTI_D2 that is addressing CPU2 (Cortex-M4) + * Note: EXTI_D2 and corresponding C2IMRx, C2EMRx and C2PRx registers are available for Dual Core devices only + */ + +typedef struct +{ +__IO uint32_t IMR1; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ +__IO uint32_t EMR1; /*!< EXTI Event mask register, Address offset: 0x04 */ +__IO uint32_t PR1; /*!< EXTI Pending register, Address offset: 0x08 */ +uint32_t RESERVED1; /*!< Reserved, 0x0C */ +__IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x10 */ +__IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x14 */ +__IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x18 */ +uint32_t RESERVED2; /*!< Reserved, 0x1C */ +__IO uint32_t IMR3; /*!< EXTI Interrupt mask register, Address offset: 0x20 */ +__IO uint32_t EMR3; /*!< EXTI Event mask register, Address offset: 0x24 */ +__IO uint32_t PR3; /*!< EXTI Pending register, Address offset: 0x28 */ +}EXTI_Core_TypeDef; + + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR1; /*!< Flash Key Register for bank1, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< Flash Option Key Register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< Flash Control Register for bank1, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< Flash Status Register for bank1, Address offset: 0x10 */ + __IO uint32_t CCR1; /*!< Flash Control Register for bank1, Address offset: 0x14 */ + __IO uint32_t OPTCR; /*!< Flash Option Control Register, Address offset: 0x18 */ + __IO uint32_t OPTSR_CUR; /*!< Flash Option Status Current Register, Address offset: 0x1C */ + __IO uint32_t OPTSR_PRG; /*!< Flash Option Status to Program Register, Address offset: 0x20 */ + __IO uint32_t OPTCCR; /*!< Flash Option Clear Control Register, Address offset: 0x24 */ + __IO uint32_t PRAR_CUR1; /*!< Flash Current Protection Address Register for bank1, Address offset: 0x28 */ + __IO uint32_t PRAR_PRG1; /*!< Flash Protection Address to Program Register for bank1, Address offset: 0x2C */ + __IO uint32_t SCAR_CUR1; /*!< Flash Current Secure Address Register for bank1, Address offset: 0x30 */ + __IO uint32_t SCAR_PRG1; /*!< Flash Secure Address to Program Register for bank1, Address offset: 0x34 */ + __IO uint32_t WPSN_CUR1; /*!< Flash Current Write Protection Register on bank1, Address offset: 0x38 */ + __IO uint32_t WPSN_PRG1; /*!< Flash Write Protection to Program Register on bank1, Address offset: 0x3C */ + __IO uint32_t BOOT7_CUR; /*!< Flash Current Boot Address for Pelican Core Register, Address offset: 0x40 */ + __IO uint32_t BOOT7_PRG; /*!< Flash Boot Address to Program for Pelican Core Register, Address offset: 0x44 */ + __IO uint32_t BOOT4_CUR; /*!< Flash Current Boot Address for M4 Core Register, Address offset: 0x48 */ + __IO uint32_t BOOT4_PRG; /*!< Flash Boot Address to Program for M4 Core Register, Address offset: 0x4C */ + __IO uint32_t CRCCR1; /*!< Flash CRC Control register For Bank1 Register , Address offset: 0x50 */ + __IO uint32_t CRCSADD1; /*!< Flash CRC Start Address Register for Bank1 , Address offset: 0x54 */ + __IO uint32_t CRCEADD1; /*!< Flash CRC End Address Register for Bank1 , Address offset: 0x58 */ + __IO uint32_t CRCDATA; /*!< Flash CRC Data Register for Bank1 , Address offset: 0x5C */ + __IO uint32_t ECC_FA1; /*!< Flash ECC Fail Address For Bank1 Register , Address offset: 0x60 */ + uint32_t RESERVED1[40]; /*!< Reserved, 0x64 to 0x100 */ + __IO uint32_t KEYR2; /*!< Flash Key Register for bank2, Address offset: 0x104 */ + uint32_t RESERVED2; /*!< Reserved, 0x108 */ + __IO uint32_t CR2; /*!< Flash Control Register for bank2, Address offset: 0x10C */ + __IO uint32_t SR2; /*!< Flash Status Register for bank2, Address offset: 0x110 */ + __IO uint32_t CCR2; /*!< Flash Status Register for bank2, Address offset: 0x114 */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x118 to 0x124 */ + __IO uint32_t PRAR_CUR2; /*!< Flash Current Protection Address Register for bank2, Address offset: 0x128 */ + __IO uint32_t PRAR_PRG2; /*!< Flash Protection Address to Program Register for bank2, Address offset: 0x12C */ + __IO uint32_t SCAR_CUR2; /*!< Flash Current Secure Address Register for bank2, Address offset: 0x130 */ + __IO uint32_t SCAR_PRG2; /*!< Flash Secure Address Register for bank2, Address offset: 0x134 */ + __IO uint32_t WPSN_CUR2; /*!< Flash Current Write Protection Register on bank2, Address offset: 0x138 */ + __IO uint32_t WPSN_PRG2; /*!< Flash Write Protection to Program Register on bank2, Address offset: 0x13C */ + uint32_t RESERVED4[4]; /*!< Reserved, 0x140 to 0x14C */ + __IO uint32_t CRCCR2; /*!< Flash CRC Control register For Bank2 Register , Address offset: 0x150 */ + __IO uint32_t CRCSADD2; /*!< Flash CRC Start Address Register for Bank2 , Address offset: 0x154 */ + __IO uint32_t CRCEADD2; /*!< Flash CRC End Address Register for Bank2 , Address offset: 0x158 */ + __IO uint32_t CRCDATA2; /*!< Flash CRC Data Register for Bank2 , Address offset: 0x15C */ + __IO uint32_t ECC_FA2; /*!< Flash ECC Fail Address For Bank2 Register , Address offset: 0x160 */ +} FLASH_TypeDef; + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ +} FMC_Bank2_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5 and 6 + */ + + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ +} GPIO_TypeDef; + +/** + * @brief Operational Amplifier (OPAMP) + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ + __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ + __IO uint32_t HSOTR; /*!< OPAMP offset trimming register for high speed mode, Address offset: 0x08 */ +} OPAMP_TypeDef; + +/** + * @brief System configuration controller + */ + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x00 */ + __IO uint32_t PMCR; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t CFGR; /*!< SYSCFG configuration registers, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t CCCSR; /*!< SYSCFG compensation cell control/status register, Address offset: 0x20 */ + __IO uint32_t CCVR; /*!< SYSCFG compensation cell value register, Address offset: 0x24 */ + __IO uint32_t CCCR; /*!< SYSCFG compensation cell code register, Address offset: 0x28 */ + __IO uint32_t PWRCR; /*!< PWR control register, Address offset: 0x2C */ + uint32_t RESERVED3[61]; /*!< Reserved, 0x30-0x120 */ + __IO uint32_t PKGR; /*!< SYSCFG package register, Address offset: 0x124 */ + uint32_t RESERVED4[118]; /*!< Reserved, 0x128-0x2FC */ + __IO uint32_t UR0; /*!< SYSCFG user register 0, Address offset: 0x300 */ + __IO uint32_t UR1; /*!< SYSCFG user register 1, Address offset: 0x304 */ + __IO uint32_t UR2; /*!< SYSCFG user register 2, Address offset: 0x308 */ + __IO uint32_t UR3; /*!< SYSCFG user register 3, Address offset: 0x30C */ + __IO uint32_t UR4; /*!< SYSCFG user register 4, Address offset: 0x310 */ + __IO uint32_t UR5; /*!< SYSCFG user register 5, Address offset: 0x314 */ + __IO uint32_t UR6; /*!< SYSCFG user register 6, Address offset: 0x318 */ + __IO uint32_t UR7; /*!< SYSCFG user register 7, Address offset: 0x31C */ + __IO uint32_t UR8; /*!< SYSCFG user register 8, Address offset: 0x320 */ + __IO uint32_t UR9; /*!< SYSCFG user register 9, Address offset: 0x324 */ + __IO uint32_t UR10; /*!< SYSCFG user register 10, Address offset: 0x328 */ + __IO uint32_t UR11; /*!< SYSCFG user register 11, Address offset: 0x32C */ + __IO uint32_t UR12; /*!< SYSCFG user register 12, Address offset: 0x330 */ + __IO uint32_t UR13; /*!< SYSCFG user register 13, Address offset: 0x334 */ + __IO uint32_t UR14; /*!< SYSCFG user register 14, Address offset: 0x338 */ + __IO uint32_t UR15; /*!< SYSCFG user register 15, Address offset: 0x33C */ + __IO uint32_t UR16; /*!< SYSCFG user register 16, Address offset: 0x340 */ + __IO uint32_t UR17; /*!< SYSCFG user register 17, Address offset: 0x344 */ + +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + +/** + * @brief JPEG Codec + */ +typedef struct +{ + __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 00h */ + __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 04h */ + __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 08h */ + __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0Ch */ + __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 10h */ + __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 14h */ + __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 18h */ + __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 1Ch */ + uint32_t Reserved20[4]; /* Reserved Address offset: 20h-2Ch */ + __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 30h */ + __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 34h */ + __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 38h */ + uint32_t Reserved3c; /* Reserved Address offset: 3Ch */ + __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 40h */ + __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 44h */ + uint32_t Reserved48[2]; /* Reserved Address offset: 48h-4Ch */ + __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 50h-8Ch */ + __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 90h-CCh */ + __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: D0h-10Ch */ + __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 110h-14Ch */ + __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 150h-18Ch */ + __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 190h-20Ch */ + __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 210h-35Ch */ + __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 360h-4F8h */ + uint32_t Reserved4FC; /* Reserved Address offset: 4FCh */ + __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encodor, AC Huffman table 0, Address offset: 500h-65Ch */ + __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encodor, AC Huffman table 1, Address offset: 660h-7BCh */ + __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encodor, DC Huffman table 0, Address offset: 7C0h-7DCh */ + __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encodor, DC Huffman table 1, Address offset: 7E0h-7FCh */ + +} JPEG_TypeDef; + +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ + +} LTDC_Layer_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CSR1; /*!< PWR power control status register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */ + __IO uint32_t CR3; /*!< PWR power control register 3, Address offset: 0x0C */ + __IO uint32_t CPUCR; /*!< PWR CPU control register, Address offset: 0x10 */ + __IO uint32_t CPU2CR; /*!< PWR CPU2 control register, Address offset: 0x14 */ + __IO uint32_t D3CR; /*!< PWR D3 domain control register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t WKUPCR; /*!< PWR wakeup clear register, Address offset: 0x20 */ + __IO uint32_t WKUPFR; /*!< PWR wakeup flag register, Address offset: 0x24 */ + __IO uint32_t WKUPEPR; /*!< PWR wakeup enable and polarity register, Address offset: 0x28 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t HSICFGR; /*!< HSI Clock Calibration Register, Address offset: 0x04 */ + __IO uint32_t CRRCR; /*!< Clock Recovery RC Register, Address offset: 0x08 */ + __IO uint32_t CSICFGR; /*!< CSI Clock Calibration Register, Address offset: 0x0C */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t D1CFGR; /*!< RCC Domain 1 configuration register, Address offset: 0x18 */ + __IO uint32_t D2CFGR; /*!< RCC Domain 2 configuration register, Address offset: 0x1C */ + __IO uint32_t D3CFGR; /*!< RCC Domain 3 configuration register, Address offset: 0x20 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t PLLCKSELR; /*!< RCC PLLs Clock Source Selection Register, Address offset: 0x28 */ + __IO uint32_t PLLCFGR; /*!< RCC PLLs Configuration Register, Address offset: 0x2C */ + __IO uint32_t PLL1DIVR; /*!< RCC PLL1 Dividers Configuration Register, Address offset: 0x30 */ + __IO uint32_t PLL1FRACR; /*!< RCC PLL1 Fractional Divider Configuration Register, Address offset: 0x34 */ + __IO uint32_t PLL2DIVR; /*!< RCC PLL2 Dividers Configuration Register, Address offset: 0x38 */ + __IO uint32_t PLL2FRACR; /*!< RCC PLL2 Fractional Divider Configuration Register, Address offset: 0x3C */ + __IO uint32_t PLL3DIVR; /*!< RCC PLL3 Dividers Configuration Register, Address offset: 0x40 */ + __IO uint32_t PLL3FRACR; /*!< RCC PLL3 Fractional Divider Configuration Register, Address offset: 0x44 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x48 */ + __IO uint32_t D1CCIPR; /*!< RCC Domain 1 Kernel Clock Configuration Register Address offset: 0x4C */ + __IO uint32_t D2CCIP1R; /*!< RCC Domain 2 Kernel Clock Configuration Register Address offset: 0x50 */ + __IO uint32_t D2CCIP2R; /*!< RCC Domain 2 Kernel Clock Configuration Register Address offset: 0x54 */ + __IO uint32_t D3CCIPR; /*!< RCC Domain 3 Kernel Clock Configuration Register Address offset: 0x58 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t CIER; /*!< RCC Clock Source Interrupt Enable Register Address offset: 0x60 */ + __IO uint32_t CIFR; /*!< RCC Clock Source Interrupt Flag Register Address offset: 0x64 */ + __IO uint32_t CICR; /*!< RCC Clock Source Interrupt Clear Register Address offset: 0x68 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x6C */ + __IO uint32_t BDCR; /*!< RCC Vswitch Backup Domain Control Register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x78 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x7C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x80 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x84 */ + __IO uint32_t AHB4RSTR; /*!< RCC AHB4 peripheral reset register, Address offset: 0x88 */ + __IO uint32_t APB3RSTR; /*!< RCC APB3 peripheral reset register, Address offset: 0x8C */ + __IO uint32_t APB1LRSTR; /*!< RCC APB1 peripheral reset Low Word register, Address offset: 0x90 */ + __IO uint32_t APB1HRSTR; /*!< RCC APB1 peripheral reset High Word register, Address offset: 0x94 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x98 */ + __IO uint32_t APB4RSTR; /*!< RCC APB4 peripheral reset register, Address offset: 0x9C */ + __IO uint32_t GCR; /*!< RCC RCC Global Control Register, Address offset: 0xA0 */ + uint32_t RESERVED8; /*!< Reserved, Address offset: 0xA4 */ + __IO uint32_t D3AMR; /*!< RCC Domain 3 Autonomous Mode Register, Address offset: 0xA8 */ + uint32_t RESERVED11[9]; /*!< Reserved, 0xAC-0xCC Address offset: 0xAC */ + __IO uint32_t RSR; /*!< RCC Reset status register, Address offset: 0xD0 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0xD4 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0xD8 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0xDC */ + __IO uint32_t AHB4ENR; /*!< RCC AHB4 peripheral clock register, Address offset: 0xE0 */ + __IO uint32_t APB3ENR; /*!< RCC APB3 peripheral clock register, Address offset: 0xE4 */ + __IO uint32_t APB1LENR; /*!< RCC APB1 peripheral clock Low Word register, Address offset: 0xE8 */ + __IO uint32_t APB1HENR; /*!< RCC APB1 peripheral clock High Word register, Address offset: 0xEC */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock register, Address offset: 0xF0 */ + __IO uint32_t APB4ENR; /*!< RCC APB4 peripheral clock register, Address offset: 0xF4 */ + uint32_t RESERVED12; /*!< Reserved, Address offset: 0xF8 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral sleep clock register, Address offset: 0xFC */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral sleep clock register, Address offset: 0x100 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral sleep clock register, Address offset: 0x104 */ + __IO uint32_t AHB4LPENR; /*!< RCC AHB4 peripheral sleep clock register, Address offset: 0x108 */ + __IO uint32_t APB3LPENR; /*!< RCC APB3 peripheral sleep clock register, Address offset: 0x10C */ + __IO uint32_t APB1LLPENR; /*!< RCC APB1 peripheral sleep clock Low Word register, Address offset: 0x110 */ + __IO uint32_t APB1HLPENR; /*!< RCC APB1 peripheral sleep clock High Word register, Address offset: 0x114 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral sleep clock register, Address offset: 0x118 */ + __IO uint32_t APB4LPENR; /*!< RCC APB4 peripheral sleep clock register, Address offset: 0x11C */ + uint32_t RESERVED13[4]; /*!< Reserved, 0x120-0x12C Address offset: 0x120 */ + +} RCC_TypeDef; + +typedef struct +{ + __IO uint32_t RSR; /*!< RCC Reset status register, Address offset: 0x00 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x04 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x08 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x0C */ + __IO uint32_t AHB4ENR; /*!< RCC AHB4 peripheral clock register, Address offset: 0x10 */ + __IO uint32_t APB3ENR; /*!< RCC APB3 peripheral clock register, Address offset: 0x14 */ + __IO uint32_t APB1LENR; /*!< RCC APB1 peripheral clock Low Word register, Address offset: 0x18 */ + __IO uint32_t APB1HENR; /*!< RCC APB1 peripheral clock High Word register, Address offset: 0x1C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock register, Address offset: 0x20 */ + __IO uint32_t APB4ENR; /*!< RCC APB4 peripheral clock register, Address offset: 0x24 */ + uint32_t RESERVED9; /*!< Reserved, Address offset: 0x28 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral sleep clock register, Address offset: 0x3C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral sleep clock register, Address offset: 0x40 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral sleep clock register, Address offset: 0x44 */ + __IO uint32_t AHB4LPENR; /*!< RCC AHB4 peripheral sleep clock register, Address offset: 0x48 */ + __IO uint32_t APB3LPENR; /*!< RCC APB3 peripheral sleep clock register, Address offset: 0x4C */ + __IO uint32_t APB1LLPENR; /*!< RCC APB1 peripheral sleep clock Low Word register, Address offset: 0x50 */ + __IO uint32_t APB1HLPENR; /*!< RCC APB1 peripheral sleep clock High Word register, Address offset: 0x54 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral sleep clock register, Address offset: 0x58 */ + __IO uint32_t APB4LPENR; /*!< RCC APB4 peripheral sleep clock register, Address offset: 0x5C */ + uint32_t RESERVED10[4]; /*!< Reserved, 0x60-0x6C Address offset: 0x60 */ + +} RCC_Core_TypeDef; + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ + uint32_t RESERVED0[16]; /*!< Reserved, 0x04 - 0x43 */ + __IO uint32_t PDMCR; /*!< SAI PDM control register, Address offset: 0x44 */ + __IO uint32_t PDMDLY; /*!< SAI PDM delay register, Address offset: 0x48 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1A */ +} SPDIFRX_TypeDef; + + +/** + * @brief Secure digital input/output Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMC clock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + __IO uint32_t ACKTIME; /*!< SDMMC Acknowledgement timer register, Address offset: 0x40 */ + uint32_t RESERVED0[3]; /*!< Reserved, 0x44 - 0x4C - 0x4C */ + __IO uint32_t IDMACTRL; /*!< SDMMC DMA control register, Address offset: 0x50 */ + __IO uint32_t IDMABSIZE; /*!< SDMMC DMA buffer size register, Address offset: 0x54 */ + __IO uint32_t IDMABASE0; /*!< SDMMC DMA buffer 0 base address register, Address offset: 0x58 */ + __IO uint32_t IDMABASE1; /*!< SDMMC DMA buffer 1 base address register, Address offset: 0x5C */ + uint32_t RESERVED1[8]; /*!< Reserved, 0x60-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ + uint32_t RESERVED2[222]; /*!< Reserved, 0x84-0x3F8 */ + __IO uint32_t IPVR; /*!< SDMMC data FIFO register, Address offset: 0x3FC */ +} SDMMC_TypeDef; + + +/** + * @brief Delay Block DLYB + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DELAY BLOCK control register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< DELAY BLOCK configuration register, Address offset: 0x04 */ +} DLYB_TypeDef; + +/** + * @brief HW Semaphore HSEM + */ + +typedef struct +{ + __IO uint32_t R[32]; /*!< 2-step write lock and read back registers, Address offset: 00h-7Ch */ + __IO uint32_t RLR[32]; /*!< 1-step read lock registers, Address offset: 80h-FCh */ + __IO uint32_t C1IER; /*!< HSEM Interrupt 0 enable register , Address offset: 100h */ + __IO uint32_t C1ICR; /*!< HSEM Interrupt 0 clear register , Address offset: 104h */ + __IO uint32_t C1ISR; /*!< HSEM Interrupt 0 Status register , Address offset: 108h */ + __IO uint32_t C1MISR; /*!< HSEM Interrupt 0 Masked Status register , Address offset: 10Ch */ + __IO uint32_t C2IER; /*!< HSEM Interrupt 1 enable register , Address offset: 110h */ + __IO uint32_t C2ICR; /*!< HSEM Interrupt 1 clear register , Address offset: 114h */ + __IO uint32_t C2ISR; /*!< HSEM Interrupt 1 Status register , Address offset: 118h */ + __IO uint32_t C2MISR; /*!< HSEM Interrupt 1 Masked Status register , Address offset: 11Ch */ + uint32_t Reserved[8]; /* Reserved Address offset: 120h-13Ch*/ + __IO uint32_t CR; /*!< HSEM Semaphore clear register , Address offset: 140h */ + __IO uint32_t KEYR; /*!< HSEM Semaphore clear key register , Address offset: 144h */ + +} HSEM_TypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< HSEM interrupt enable register , Address offset: 0h */ + __IO uint32_t ICR; /*!< HSEM interrupt clear register , Address offset: 4h */ + __IO uint32_t ISR; /*!< HSEM interrupt status register , Address offset: 8h */ + __IO uint32_t MISR; /*!< HSEM masked interrupt status register , Address offset: Ch */ +} HSEM_Common_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI/I2S Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t CFG1; /*!< SPI Configuration register 1, Address offset: 0x08 */ + __IO uint32_t CFG2; /*!< SPI Configuration register 2, Address offset: 0x0C */ + __IO uint32_t IER; /*!< SPI/I2S Interrupt Enable register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< SPI/I2S Status register, Address offset: 0x14 */ + __IO uint32_t IFCR; /*!< SPI/I2S Interrupt/Status flags clear register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, 0x1C */ + __IO uint32_t TXDR; /*!< SPI/I2S Transmit data register, Address offset: 0x20 */ + uint32_t RESERVED1[3]; /*!< Reserved, 0x24-0x2C */ + __IO uint32_t RXDR; /*!< SPI/I2S Receive data register, Address offset: 0x30 */ + uint32_t RESERVED2[3]; /*!< Reserved, 0x34-0x3C */ + __IO uint32_t CRCPOLY; /*!< SPI CRC Polynomial register, Address offset: 0x40 */ + __IO uint32_t TXCRC; /*!< SPI Transmitter CRC register, Address offset: 0x44 */ + __IO uint32_t RXCRC; /*!< SPI Receiver CRC register, Address offset: 0x48 */ + __IO uint32_t UDRDR; /*!< SPI Underrun data register, Address offset: 0x4C */ + __IO uint32_t I2SCFGR; /*!< I2S Configuration register, Address offset: 0x50 */ + +} SPI_TypeDef; +/** + * @brief QUAD Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + uint32_t RESERVED1; /*!< Reserved, 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function option register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief LPTIMIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved, 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Configuration register, Address offset: 0x24 */ +} LPTIM_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t SR; /*!< Comparator status register, Address offset: 0x00 */ + __IO uint32_t ICFR; /*!< Comparator interrupt clear flag register, Address offset: 0x04 */ + __IO uint32_t OR; /*!< Comparator option register, Address offset: 0x08 */ +} COMPOPT_TypeDef; + +typedef struct +{ + __IO uint32_t CFGR; /*!< Comparator configuration register , Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CFGR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ +} COMP_Common_TypeDef; +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART clock Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Single Wire Protocol Master Interface SPWMI + */ +typedef struct +{ + __IO uint32_t CR; /*!< SWPMI Configuration/Control register, Address offset: 0x00 */ + __IO uint32_t BRR; /*!< SWPMI bitrate register, Address offset: 0x04 */ + uint32_t RESERVED1; /*!< Reserved, 0x08 */ + __IO uint32_t ISR; /*!< SWPMI Interrupt and Status register, Address offset: 0x0C */ + __IO uint32_t ICR; /*!< SWPMI Interrupt Flag Clear register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< SWPMI Interrupt Enable register, Address offset: 0x14 */ + __IO uint32_t RFL; /*!< SWPMI Receive Frame Length register, Address offset: 0x18 */ + __IO uint32_t TDR; /*!< SWPMI Transmit data register, Address offset: 0x1C */ + __IO uint32_t RDR; /*!< SWPMI Receive data register, Address offset: 0x20 */ + __IO uint32_t OR; /*!< SWPMI Option register, Address offset: 0x24 */ +} SWPMI_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief RAM_ECC_Specific_Registers + */ +typedef struct +{ + __IO uint32_t CR; /*!< RAMECC monitor configuration register */ + __IO uint32_t SR; /*!< RAMECC monitor status register */ + __IO uint32_t FAR; /*!< RAMECC monitor failing address register */ + __IO uint32_t FDRL; /*!< RAMECC monitor failing data low register */ + __IO uint32_t FDRH; /*!< RAMECC monitor failing data high register */ + __IO uint32_t FECR; /*!< RAMECC monitor failing ECC error code register */ +} RAMECC_MonitorTypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< RAMECC interrupt enable register */ +} RAMECC_TypeDef; +/** + * @} + */ + + + +/** + * @brief High resolution Timer (HRTIM) + */ +/* HRTIM master registers definition */ +typedef struct +{ + __IO uint32_t MCR; /*!< HRTIM Master Timer control register, Address offset: 0x00 */ + __IO uint32_t MISR; /*!< HRTIM Master Timer interrupt status register, Address offset: 0x04 */ + __IO uint32_t MICR; /*!< HRTIM Master Timer interrupt clear register, Address offset: 0x08 */ + __IO uint32_t MDIER; /*!< HRTIM Master Timer DMA/interrupt enable register Address offset: 0x0C */ + __IO uint32_t MCNTR; /*!< HRTIM Master Timer counter register, Address offset: 0x10 */ + __IO uint32_t MPER; /*!< HRTIM Master Timer period register, Address offset: 0x14 */ + __IO uint32_t MREP; /*!< HRTIM Master Timer repetition register, Address offset: 0x18 */ + __IO uint32_t MCMP1R; /*!< HRTIM Master Timer compare 1 register, Address offset: 0x1C */ + uint32_t RESERVED0; /*!< Reserved, 0x20 */ + __IO uint32_t MCMP2R; /*!< HRTIM Master Timer compare 2 register, Address offset: 0x24 */ + __IO uint32_t MCMP3R; /*!< HRTIM Master Timer compare 3 register, Address offset: 0x28 */ + __IO uint32_t MCMP4R; /*!< HRTIM Master Timer compare 4 register, Address offset: 0x2C */ + uint32_t RESERVED1[20]; /*!< Reserved, 0x30..0x7C */ +}HRTIM_Master_TypeDef; + +/* HRTIM Timer A to E registers definition */ +typedef struct +{ + __IO uint32_t TIMxCR; /*!< HRTIM Timerx control register, Address offset: 0x00 */ + __IO uint32_t TIMxISR; /*!< HRTIM Timerx interrupt status register, Address offset: 0x04 */ + __IO uint32_t TIMxICR; /*!< HRTIM Timerx interrupt clear register, Address offset: 0x08 */ + __IO uint32_t TIMxDIER; /*!< HRTIM Timerx DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t CNTxR; /*!< HRTIM Timerx counter register, Address offset: 0x10 */ + __IO uint32_t PERxR; /*!< HRTIM Timerx period register, Address offset: 0x14 */ + __IO uint32_t REPxR; /*!< HRTIM Timerx repetition register, Address offset: 0x18 */ + __IO uint32_t CMP1xR; /*!< HRTIM Timerx compare 1 register, Address offset: 0x1C */ + __IO uint32_t CMP1CxR; /*!< HRTIM Timerx compare 1 compound register, Address offset: 0x20 */ + __IO uint32_t CMP2xR; /*!< HRTIM Timerx compare 2 register, Address offset: 0x24 */ + __IO uint32_t CMP3xR; /*!< HRTIM Timerx compare 3 register, Address offset: 0x28 */ + __IO uint32_t CMP4xR; /*!< HRTIM Timerx compare 4 register, Address offset: 0x2C */ + __IO uint32_t CPT1xR; /*!< HRTIM Timerx capture 1 register, Address offset: 0x30 */ + __IO uint32_t CPT2xR; /*!< HRTIM Timerx capture 2 register, Address offset: 0x34 */ + __IO uint32_t DTxR; /*!< HRTIM Timerx dead time register, Address offset: 0x38 */ + __IO uint32_t SETx1R; /*!< HRTIM Timerx output 1 set register, Address offset: 0x3C */ + __IO uint32_t RSTx1R; /*!< HRTIM Timerx output 1 reset register, Address offset: 0x40 */ + __IO uint32_t SETx2R; /*!< HRTIM Timerx output 2 set register, Address offset: 0x44 */ + __IO uint32_t RSTx2R; /*!< HRTIM Timerx output 2 reset register, Address offset: 0x48 */ + __IO uint32_t EEFxR1; /*!< HRTIM Timerx external event filtering 1 register, Address offset: 0x4C */ + __IO uint32_t EEFxR2; /*!< HRTIM Timerx external event filtering 2 register, Address offset: 0x50 */ + __IO uint32_t RSTxR; /*!< HRTIM Timerx Reset register, Address offset: 0x54 */ + __IO uint32_t CHPxR; /*!< HRTIM Timerx Chopper register, Address offset: 0x58 */ + __IO uint32_t CPT1xCR; /*!< HRTIM Timerx Capture 1 register, Address offset: 0x5C */ + __IO uint32_t CPT2xCR; /*!< HRTIM Timerx Capture 2 register, Address offset: 0x60 */ + __IO uint32_t OUTxR; /*!< HRTIM Timerx Output register, Address offset: 0x64 */ + __IO uint32_t FLTxR; /*!< HRTIM Timerx Fault register, Address offset: 0x68 */ + uint32_t RESERVED0[5]; /*!< Reserved, 0x6C..0x7C */ +}HRTIM_Timerx_TypeDef; + +/* HRTIM common register definition */ +typedef struct +{ + __IO uint32_t CR1; /*!< HRTIM control register1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< HRTIM control register2, Address offset: 0x04 */ + __IO uint32_t ISR; /*!< HRTIM interrupt status register, Address offset: 0x08 */ + __IO uint32_t ICR; /*!< HRTIM interrupt clear register, Address offset: 0x0C */ + __IO uint32_t IER; /*!< HRTIM interrupt enable register, Address offset: 0x10 */ + __IO uint32_t OENR; /*!< HRTIM Output enable register, Address offset: 0x14 */ + __IO uint32_t ODISR; /*!< HRTIM Output disable register, Address offset: 0x18 */ + __IO uint32_t ODSR; /*!< HRTIM Output disable status register, Address offset: 0x1C */ + __IO uint32_t BMCR; /*!< HRTIM Burst mode control register, Address offset: 0x20 */ + __IO uint32_t BMTRGR; /*!< HRTIM Burst mode trigger register, Address offset: 0x24 */ + __IO uint32_t BMCMPR; /*!< HRTIM Burst mode compare register, Address offset: 0x28 */ + __IO uint32_t BMPER; /*!< HRTIM Burst mode period register, Address offset: 0x2C */ + __IO uint32_t EECR1; /*!< HRTIM Timer external event control register1, Address offset: 0x30 */ + __IO uint32_t EECR2; /*!< HRTIM Timer external event control register2, Address offset: 0x34 */ + __IO uint32_t EECR3; /*!< HRTIM Timer external event control register3, Address offset: 0x38 */ + __IO uint32_t ADC1R; /*!< HRTIM ADC Trigger 1 register, Address offset: 0x3C */ + __IO uint32_t ADC2R; /*!< HRTIM ADC Trigger 2 register, Address offset: 0x40 */ + __IO uint32_t ADC3R; /*!< HRTIM ADC Trigger 3 register, Address offset: 0x44 */ + __IO uint32_t ADC4R; /*!< HRTIM ADC Trigger 4 register, Address offset: 0x48 */ + __IO uint32_t RESERVED0; /*!< Reserved, Address offset: 0x4C */ + __IO uint32_t FLTINR1; /*!< HRTIM Fault input register1, Address offset: 0x50 */ + __IO uint32_t FLTINR2; /*!< HRTIM Fault input register2, Address offset: 0x54 */ + __IO uint32_t BDMUPR; /*!< HRTIM Burst DMA Master Timer update register, Address offset: 0x58 */ + __IO uint32_t BDTAUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x5C */ + __IO uint32_t BDTBUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x60 */ + __IO uint32_t BDTCUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x64 */ + __IO uint32_t BDTDUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x68 */ + __IO uint32_t BDTEUPR; /*!< HRTIM Burst DMA Timerx update register, Address offset: 0x6C */ + __IO uint32_t BDMADR; /*!< HRTIM Burst DMA Master Data register, Address offset: 0x70 */ +}HRTIM_Common_TypeDef; + +/* HRTIM register definition */ +typedef struct { + HRTIM_Master_TypeDef sMasterRegs; + HRTIM_Timerx_TypeDef sTimerxRegs[5]; + uint32_t RESERVED0[32]; + HRTIM_Common_TypeDef sCommonRegs; +}HRTIM_TypeDef; +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @brief MDIOS + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t WRFR; + __IO uint32_t CWRFR; + __IO uint32_t RDFR; + __IO uint32_t CRDFR; + __IO uint32_t SR; + __IO uint32_t CLRFR; + uint32_t RESERVED[57]; + __IO uint32_t DINR0; + __IO uint32_t DINR1; + __IO uint32_t DINR2; + __IO uint32_t DINR3; + __IO uint32_t DINR4; + __IO uint32_t DINR5; + __IO uint32_t DINR6; + __IO uint32_t DINR7; + __IO uint32_t DINR8; + __IO uint32_t DINR9; + __IO uint32_t DINR10; + __IO uint32_t DINR11; + __IO uint32_t DINR12; + __IO uint32_t DINR13; + __IO uint32_t DINR14; + __IO uint32_t DINR15; + __IO uint32_t DINR16; + __IO uint32_t DINR17; + __IO uint32_t DINR18; + __IO uint32_t DINR19; + __IO uint32_t DINR20; + __IO uint32_t DINR21; + __IO uint32_t DINR22; + __IO uint32_t DINR23; + __IO uint32_t DINR24; + __IO uint32_t DINR25; + __IO uint32_t DINR26; + __IO uint32_t DINR27; + __IO uint32_t DINR28; + __IO uint32_t DINR29; + __IO uint32_t DINR30; + __IO uint32_t DINR31; + __IO uint32_t DOUTR0; + __IO uint32_t DOUTR1; + __IO uint32_t DOUTR2; + __IO uint32_t DOUTR3; + __IO uint32_t DOUTR4; + __IO uint32_t DOUTR5; + __IO uint32_t DOUTR6; + __IO uint32_t DOUTR7; + __IO uint32_t DOUTR8; + __IO uint32_t DOUTR9; + __IO uint32_t DOUTR10; + __IO uint32_t DOUTR11; + __IO uint32_t DOUTR12; + __IO uint32_t DOUTR13; + __IO uint32_t DOUTR14; + __IO uint32_t DOUTR15; + __IO uint32_t DOUTR16; + __IO uint32_t DOUTR17; + __IO uint32_t DOUTR18; + __IO uint32_t DOUTR19; + __IO uint32_t DOUTR20; + __IO uint32_t DOUTR21; + __IO uint32_t DOUTR22; + __IO uint32_t DOUTR23; + __IO uint32_t DOUTR24; + __IO uint32_t DOUTR25; + __IO uint32_t DOUTR26; + __IO uint32_t DOUTR27; + __IO uint32_t DOUTR28; + __IO uint32_t DOUTR29; + __IO uint32_t DOUTR30; + __IO uint32_t DOUTR31; +} MDIOS_TypeDef; + + +/** + * @brief USB_OTG_Core_Registers + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ + uint32_t Reserved30[2]; /*!< Reserved 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */ + __IO uint32_t CID; /*!< User ID Register 03Ch */ + __IO uint32_t GSNPSID; /* USB_OTG core ID 040h*/ + __IO uint32_t GHWCFG1; /* User HW config1 044h*/ + __IO uint32_t GHWCFG2; /* User HW config2 048h*/ + __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */ + uint32_t Reserved6; /*!< Reserved 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */ + uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ +} USB_OTG_GlobalTypeDef; + + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ + __IO uint32_t DCTL; /*!< dev Control Register 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */ + uint32_t Reserved0C; /*!< Reserved 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */ + uint32_t Reserved20; /*!< Reserved 820h */ + uint32_t Reserved9; /*!< Reserved 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */ + uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ + uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */ + uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ +} USB_OTG_OUTEndpointTypeDef; + + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */ + uint32_t Reserved40C; /*!< Reserved 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */ + uint32_t Reserved[2]; /*!< Reserved */ +} USB_OTG_HostChannelTypeDef; +/** + * @} + */ + + +/** + * @brief Global Programmer View + */ + +typedef struct +{ + uint32_t RESERVED0[2036]; /*!< Reserved, Address offset: 0x00-0x1FCC */ + __IO uint32_t AXI_PERIPH_ID_4; /*!< AXI interconnect - peripheral ID4 register, Address offset: 0x1FD0 */ + uint32_t AXI_PERIPH_ID_5; /*!< Reserved, Address offset: 0x1FD4 */ + uint32_t AXI_PERIPH_ID_6; /*!< Reserved, Address offset: 0x1FD8 */ + uint32_t AXI_PERIPH_ID_7; /*!< Reserved, Address offset: 0x1FDC */ + __IO uint32_t AXI_PERIPH_ID_0; /*!< AXI interconnect - peripheral ID0 register, Address offset: 0x1FE0 */ + __IO uint32_t AXI_PERIPH_ID_1; /*!< AXI interconnect - peripheral ID1 register, Address offset: 0x1FE4 */ + __IO uint32_t AXI_PERIPH_ID_2; /*!< AXI interconnect - peripheral ID2 register, Address offset: 0x1FE8 */ + __IO uint32_t AXI_PERIPH_ID_3; /*!< AXI interconnect - peripheral ID3 register, Address offset: 0x1FEC */ + __IO uint32_t AXI_COMP_ID_0; /*!< AXI interconnect - component ID0 register, Address offset: 0x1FF0 */ + __IO uint32_t AXI_COMP_ID_1; /*!< AXI interconnect - component ID1 register, Address offset: 0x1FF4 */ + __IO uint32_t AXI_COMP_ID_2; /*!< AXI interconnect - component ID2 register, Address offset: 0x1FF8 */ + __IO uint32_t AXI_COMP_ID_3; /*!< AXI interconnect - component ID3 register, Address offset: 0x1FFC */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x2000-0x2004 */ + __IO uint32_t AXI_TARG1_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 1 bus matrix issuing functionality register, Address offset: 0x2008 */ + uint32_t RESERVED2[6]; /*!< Reserved, Address offset: 0x200C-0x2020 */ + __IO uint32_t AXI_TARG1_FN_MOD2; /*!< AXI interconnect - TARG 1 bus matrix functionality 2 register, Address offset: 0x2024 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x2028 */ + __IO uint32_t AXI_TARG1_FN_MOD_LB; /*!< AXI interconnect - TARG 1 long burst functionality modification register, Address offset: 0x202C */ + uint32_t RESERVED4[54]; /*!< Reserved, Address offset: 0x2030-0x2104 */ + __IO uint32_t AXI_TARG1_FN_MOD; /*!< AXI interconnect - TARG 1 issuing functionality modification register, Address offset: 0x2108 */ + uint32_t RESERVED5[959]; /*!< Reserved, Address offset: 0x210C-0x3004 */ + __IO uint32_t AXI_TARG2_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 2 bus matrix issuing functionality register, Address offset: 0x3008 */ + uint32_t RESERVED6[6]; /*!< Reserved, Address offset: 0x300C-0x3020 */ + __IO uint32_t AXI_TARG2_FN_MOD2; /*!< AXI interconnect - TARG 2 bus matrix functionality 2 register, Address offset: 0x3024 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x3028 */ + __IO uint32_t AXI_TARG2_FN_MOD_LB; /*!< AXI interconnect - TARG 2 long burst functionality modification register, Address offset: 0x302C */ + uint32_t RESERVED8[54]; /*!< Reserved, Address offset: 0x3030-0x3104 */ + __IO uint32_t AXI_TARG2_FN_MOD; /*!< AXI interconnect - TARG 2 issuing functionality modification register, Address offset: 0x3108 */ + uint32_t RESERVED9[959]; /*!< Reserved, Address offset: 0x310C-0x4004 */ + __IO uint32_t AXI_TARG3_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 3 bus matrix issuing functionality register, Address offset: 0x4008 */ + uint32_t RESERVED10[1023]; /*!< Reserved, Address offset: 0x400C-0x5004 */ + __IO uint32_t AXI_TARG4_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 4 bus matrix issuing functionality register, Address offset: 0x5008 */ + uint32_t RESERVED11[1023]; /*!< Reserved, Address offset: 0x500C-0x6004 */ + __IO uint32_t AXI_TARG5_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 5 bus matrix issuing functionality register, Address offset: 0x6008 */ + uint32_t RESERVED12[1023]; /*!< Reserved, Address offset: 0x600C-0x7004 */ + __IO uint32_t AXI_TARG6_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 6 bus matrix issuing functionality register, Address offset: 0x7008 */ + uint32_t RESERVED13[1023]; /*!< Reserved, Address offset: 0x700C-0x8004 */ + __IO uint32_t AXI_TARG7_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 7 bus matrix issuing functionality register, Address offset: 0x8008 */ + uint32_t RESERVED14[6]; /*!< Reserved, Address offset: 0x800C-0x8020 */ + __IO uint32_t AXI_TARG7_FN_MOD2; /*!< AXI interconnect - TARG 7 bus matrix functionality 2 register, Address offset: 0x8024 */ + uint32_t RESERVED15; /*!< Reserved, Address offset: 0x8028 */ + __IO uint32_t AXI_TARG7_FN_MOD_LB; /*!< AXI interconnect - TARG 7 long burst functionality modification register, Address offset: 0x802C */ + uint32_t RESERVED16[54]; /*!< Reserved, Address offset: 0x8030-0x8104 */ + __IO uint32_t AXI_TARG7_FN_MOD; /*!< AXI interconnect - TARG 7 issuing functionality modification register, Address offset: 0x8108 */ + uint32_t RESERVED17[59334]; /*!< Reserved, Address offset: 0x810C-0x42020 */ + __IO uint32_t AXI_INI1_FN_MOD2; /*!< AXI interconnect - INI 1 functionality modification 2 register, Address offset: 0x42024 */ + __IO uint32_t AXI_INI1_FN_MOD_AHB; /*!< AXI interconnect - INI 1 AHB functionality modification register, Address offset: 0x42028 */ + uint32_t RESERVED18[53]; /*!< Reserved, Address offset: 0x4202C-0x420FC */ + __IO uint32_t AXI_INI1_READ_QOS; /*!< AXI interconnect - INI 1 read QoS register, Address offset: 0x42100 */ + __IO uint32_t AXI_INI1_WRITE_QOS; /*!< AXI interconnect - INI 1 write QoS register, Address offset: 0x42104 */ + __IO uint32_t AXI_INI1_FN_MOD; /*!< AXI interconnect - INI 1 issuing functionality modification register, Address offset: 0x42108 */ + uint32_t RESERVED19[1021]; /*!< Reserved, Address offset: 0x4210C-0x430FC */ + __IO uint32_t AXI_INI2_READ_QOS; /*!< AXI interconnect - INI 2 read QoS register, Address offset: 0x43100 */ + __IO uint32_t AXI_INI2_WRITE_QOS; /*!< AXI interconnect - INI 2 write QoS register, Address offset: 0x43104 */ + __IO uint32_t AXI_INI2_FN_MOD; /*!< AXI interconnect - INI 2 issuing functionality modification register, Address offset: 0x43108 */ + uint32_t RESERVED20[966]; /*!< Reserved, Address offset: 0x4310C-0x44020 */ + __IO uint32_t AXI_INI3_FN_MOD2; /*!< AXI interconnect - INI 3 functionality modification 2 register, Address offset: 0x44024 */ + __IO uint32_t AXI_INI3_FN_MOD_AHB; /*!< AXI interconnect - INI 3 AHB functionality modification register, Address offset: 0x44028 */ + uint32_t RESERVED21[53]; /*!< Reserved, Address offset: 0x4402C-0x440FC */ + __IO uint32_t AXI_INI3_READ_QOS; /*!< AXI interconnect - INI 3 read QoS register, Address offset: 0x44100 */ + __IO uint32_t AXI_INI3_WRITE_QOS; /*!< AXI interconnect - INI 3 write QoS register, Address offset: 0x44104 */ + __IO uint32_t AXI_INI3_FN_MOD; /*!< AXI interconnect - INI 3 issuing functionality modification register, Address offset: 0x44108 */ + uint32_t RESERVED22[1021]; /*!< Reserved, Address offset: 0x4410C-0x450FC */ + __IO uint32_t AXI_INI4_READ_QOS; /*!< AXI interconnect - INI 4 read QoS register, Address offset: 0x45100 */ + __IO uint32_t AXI_INI4_WRITE_QOS; /*!< AXI interconnect - INI 4 write QoS register, Address offset: 0x45104 */ + __IO uint32_t AXI_INI4_FN_MOD; /*!< AXI interconnect - INI 4 issuing functionality modification register, Address offset: 0x45108 */ + uint32_t RESERVED23[1021]; /*!< Reserved, Address offset: 0x4510C-0x460FC */ + __IO uint32_t AXI_INI5_READ_QOS; /*!< AXI interconnect - INI 5 read QoS register, Address offset: 0x46100 */ + __IO uint32_t AXI_INI5_WRITE_QOS; /*!< AXI interconnect - INI 5 write QoS register, Address offset: 0x46104 */ + __IO uint32_t AXI_INI5_FN_MOD; /*!< AXI interconnect - INI 5 issuing functionality modification register, Address offset: 0x46108 */ + uint32_t RESERVED24[1021]; /*!< Reserved, Address offset: 0x4610C-0x470FC */ + __IO uint32_t AXI_INI6_READ_QOS; /*!< AXI interconnect - INI 6 read QoS register, Address offset: 0x47100 */ + __IO uint32_t AXI_INI6_WRITE_QOS; /*!< AXI interconnect - INI 6 write QoS register, Address offset: 0x47104 */ + __IO uint32_t AXI_INI6_FN_MOD; /*!< AXI interconnect - INI 6 issuing functionality modification register, Address offset: 0x47108 */ + uint32_t RESERVED25[1021]; /*!< Reserved, Address offset: 0x4710C-0x480FC */ + __IO uint32_t AXI_INI7_READ_QOS; /*!< AXI interconnect - INI 7 read QoS register, Address offset: 0x48100 */ + __IO uint32_t AXI_INI7_WRITE_QOS; /*!< AXI interconnect - INI 7 write QoS register, Address offset: 0x48104 */ + __IO uint32_t AXI_INI7_FN_MOD; /*!< AXI interconnect - INI 7 issuing functionality modification register, Address offset: 0x48108 */ + +} GPV_TypeDef; + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define D1_ITCMRAM_BASE (0x00000000UL) /*!< Base address of : 64KB RAM reserved for CPU execution/instruction accessible over ITCM */ +#define D1_ITCMICP_BASE (0x00100000UL) /*!< Base address of : (up to 128KB) embedded Test FLASH memory accessible over ITCM */ +#define D1_DTCMRAM_BASE (0x20000000UL) /*!< Base address of : 128KB system data RAM accessible over DTCM */ +#define D1_AXIFLASH_BASE (0x08000000UL) /*!< Base address of : (up to 2 MB) embedded FLASH memory accessible over AXI */ +#define D1_AXIICP_BASE (0x1FF00000UL) /*!< Base address of : (up to 128KB) embedded Test FLASH memory accessible over AXI */ +#define D1_AXISRAM_BASE (0x24000000UL) /*!< Base address of : (up to 512KB) system data RAM accessible over over AXI */ + +#define D2_AXISRAM_BASE (0x10000000UL) /*!< Base address of : (up to 288KB) system data RAM accessible over over AXI */ +#define D2_AHBSRAM_BASE (0x30000000UL) /*!< Base address of : (up to 288KB) system data RAM accessible over over AXI->AHB Bridge */ + +#define D3_BKPSRAM_BASE (0x38800000UL) /*!< Base address of : Backup SRAM(4 KB) over AXI->AHB Bridge */ +#define D3_SRAM_BASE (0x38000000UL) /*!< Base address of : Backup SRAM(64 KB) over AXI->AHB Bridge */ + +#define PERIPH_BASE (0x40000000UL) /*!< Base address of : AHB/APB Peripherals */ +#define QSPI_BASE (0x90000000UL) /*!< Base address of : QSPI memories accessible over AXI */ + +#define FLASH_BANK1_BASE (0x08000000UL) /*!< Base address of : (up to 1 MB) Flash Bank1 accessible over AXI */ +#define FLASH_BANK2_BASE (0x08100000UL) /*!< Base address of : (up to 1 MB) Flash Bank2 accessible over AXI */ +#define FLASH_END (0x081FFFFFUL) /*!< FLASH end address */ + +/* Legacy define */ +#define FLASH_BASE FLASH_BANK1_BASE + +/*!< Device electronic signature memory map */ +#define UID_BASE (0x1FF1E800UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FF1E880UL) /*!< FLASH Size register base address */ + + +/*!< Peripheral memory map */ +#define D2_APB1PERIPH_BASE PERIPH_BASE +#define D2_APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define D2_AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define D2_AHB2PERIPH_BASE (PERIPH_BASE + 0x08020000UL) + +#define D1_APB1PERIPH_BASE (PERIPH_BASE + 0x10000000UL) +#define D1_AHB1PERIPH_BASE (PERIPH_BASE + 0x12000000UL) + +#define D3_APB1PERIPH_BASE (PERIPH_BASE + 0x18000000UL) +#define D3_AHB1PERIPH_BASE (PERIPH_BASE + 0x18020000UL) + +/*!< Legacy Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) + + +/*!< D1_AHB1PERIPH peripherals */ + +#define MDMA_BASE (D1_AHB1PERIPH_BASE + 0x0000UL) +#define DMA2D_BASE (D1_AHB1PERIPH_BASE + 0x1000UL) +#define JPGDEC_BASE (D1_AHB1PERIPH_BASE + 0x3000UL) +#define FLASH_R_BASE (D1_AHB1PERIPH_BASE + 0x2000UL) +#define FMC_R_BASE (D1_AHB1PERIPH_BASE + 0x4000UL) +#define QSPI_R_BASE (D1_AHB1PERIPH_BASE + 0x5000UL) +#define DLYB_QSPI_BASE (D1_AHB1PERIPH_BASE + 0x6000UL) +#define SDMMC1_BASE (D1_AHB1PERIPH_BASE + 0x7000UL) +#define DLYB_SDMMC1_BASE (D1_AHB1PERIPH_BASE + 0x8000UL) +#define RAMECC1_BASE (D1_AHB1PERIPH_BASE + 0x9000UL) + +/*!< D2_AHB1PERIPH peripherals */ + +#define DMA1_BASE (D2_AHB1PERIPH_BASE + 0x0000UL) +#define DMA2_BASE (D2_AHB1PERIPH_BASE + 0x0400UL) +#define DMAMUX1_BASE (D2_AHB1PERIPH_BASE + 0x0800UL) +#define ADC1_BASE (D2_AHB1PERIPH_BASE + 0x2000UL) +#define ADC2_BASE (D2_AHB1PERIPH_BASE + 0x2100UL) +#define ADC12_COMMON_BASE (D2_AHB1PERIPH_BASE + 0x2300UL) +#define ART_BASE (D2_AHB1PERIPH_BASE + 0x4400UL) +#define ETH_BASE (D2_AHB1PERIPH_BASE + 0x8000UL) +#define ETH_MAC_BASE (ETH_BASE) + +/*!< USB registers base address */ +#define USB1_OTG_HS_PERIPH_BASE (0x40040000UL) +#define USB2_OTG_FS_PERIPH_BASE (0x40080000UL) +#define USB_OTG_GLOBAL_BASE (0x000UL) +#define USB_OTG_DEVICE_BASE (0x800UL) +#define USB_OTG_IN_ENDPOINT_BASE (0x900UL) +#define USB_OTG_OUT_ENDPOINT_BASE (0xB00UL) +#define USB_OTG_EP_REG_SIZE (0x20UL) +#define USB_OTG_HOST_BASE (0x400UL) +#define USB_OTG_HOST_PORT_BASE (0x440UL) +#define USB_OTG_HOST_CHANNEL_BASE (0x500UL) +#define USB_OTG_HOST_CHANNEL_SIZE (0x20UL) +#define USB_OTG_PCGCCTL_BASE (0xE00UL) +#define USB_OTG_FIFO_BASE (0x1000UL) +#define USB_OTG_FIFO_SIZE (0x1000UL) + +/*!< D2_AHB2PERIPH peripherals */ + +#define DCMI_BASE (D2_AHB2PERIPH_BASE + 0x0000UL) +#define RNG_BASE (D2_AHB2PERIPH_BASE + 0x1800UL) +#define SDMMC2_BASE (D2_AHB2PERIPH_BASE + 0x2400UL) +#define DLYB_SDMMC2_BASE (D2_AHB2PERIPH_BASE + 0x2800UL) +#define RAMECC2_BASE (D2_AHB2PERIPH_BASE + 0x3000UL) + +/*!< D3_AHB1PERIPH peripherals */ +#define GPIOA_BASE (D3_AHB1PERIPH_BASE + 0x0000UL) +#define GPIOB_BASE (D3_AHB1PERIPH_BASE + 0x0400UL) +#define GPIOC_BASE (D3_AHB1PERIPH_BASE + 0x0800UL) +#define GPIOD_BASE (D3_AHB1PERIPH_BASE + 0x0C00UL) +#define GPIOE_BASE (D3_AHB1PERIPH_BASE + 0x1000UL) +#define GPIOF_BASE (D3_AHB1PERIPH_BASE + 0x1400UL) +#define GPIOG_BASE (D3_AHB1PERIPH_BASE + 0x1800UL) +#define GPIOH_BASE (D3_AHB1PERIPH_BASE + 0x1C00UL) +#define GPIOI_BASE (D3_AHB1PERIPH_BASE + 0x2000UL) +#define GPIOJ_BASE (D3_AHB1PERIPH_BASE + 0x2400UL) +#define GPIOK_BASE (D3_AHB1PERIPH_BASE + 0x2800UL) +#define RCC_BASE (D3_AHB1PERIPH_BASE + 0x4400UL) +#define RCC_C1_BASE (RCC_BASE + 0x130UL) +#define RCC_C2_BASE (RCC_BASE + 0x190UL) +#define PWR_BASE (D3_AHB1PERIPH_BASE + 0x4800UL) +#define CRC_BASE (D3_AHB1PERIPH_BASE + 0x4C00UL) +#define BDMA_BASE (D3_AHB1PERIPH_BASE + 0x5400UL) +#define DMAMUX2_BASE (D3_AHB1PERIPH_BASE + 0x5800UL) +#define ADC3_BASE (D3_AHB1PERIPH_BASE + 0x6000UL) +#define ADC3_COMMON_BASE (D3_AHB1PERIPH_BASE + 0x6300UL) +#define HSEM_BASE (D3_AHB1PERIPH_BASE + 0x6400UL) +#define RAMECC3_BASE (D3_AHB1PERIPH_BASE + 0x7000UL) + +/*!< D1_APB1PERIPH peripherals */ +#define LTDC_BASE (D1_APB1PERIPH_BASE + 0x1000UL) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x84UL) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x104UL) +#define DSI_BASE (D1_APB1PERIPH_BASE) +#define WWDG1_BASE (D1_APB1PERIPH_BASE + 0x3000UL) + +/*!< D2_APB1PERIPH peripherals */ +#define TIM2_BASE (D2_APB1PERIPH_BASE + 0x0000UL) +#define TIM3_BASE (D2_APB1PERIPH_BASE + 0x0400UL) +#define TIM4_BASE (D2_APB1PERIPH_BASE + 0x0800UL) +#define TIM5_BASE (D2_APB1PERIPH_BASE + 0x0C00UL) +#define TIM6_BASE (D2_APB1PERIPH_BASE + 0x1000UL) +#define TIM7_BASE (D2_APB1PERIPH_BASE + 0x1400UL) +#define TIM12_BASE (D2_APB1PERIPH_BASE + 0x1800UL) +#define TIM13_BASE (D2_APB1PERIPH_BASE + 0x1C00UL) +#define TIM14_BASE (D2_APB1PERIPH_BASE + 0x2000UL) +#define LPTIM1_BASE (D2_APB1PERIPH_BASE + 0x2400UL) + +#define WWDG2_BASE (D2_APB1PERIPH_BASE + 0x2C00UL) + +#define SPI2_BASE (D2_APB1PERIPH_BASE + 0x3800UL) +#define SPI3_BASE (D2_APB1PERIPH_BASE + 0x3C00UL) +#define SPDIFRX_BASE (D2_APB1PERIPH_BASE + 0x4000UL) +#define USART2_BASE (D2_APB1PERIPH_BASE + 0x4400UL) +#define USART3_BASE (D2_APB1PERIPH_BASE + 0x4800UL) +#define UART4_BASE (D2_APB1PERIPH_BASE + 0x4C00UL) +#define UART5_BASE (D2_APB1PERIPH_BASE + 0x5000UL) +#define I2C1_BASE (D2_APB1PERIPH_BASE + 0x5400UL) +#define I2C2_BASE (D2_APB1PERIPH_BASE + 0x5800UL) +#define I2C3_BASE (D2_APB1PERIPH_BASE + 0x5C00UL) +#define CEC_BASE (D2_APB1PERIPH_BASE + 0x6C00UL) +#define DAC1_BASE (D2_APB1PERIPH_BASE + 0x7400UL) +#define UART7_BASE (D2_APB1PERIPH_BASE + 0x7800UL) +#define UART8_BASE (D2_APB1PERIPH_BASE + 0x7C00UL) +#define CRS_BASE (D2_APB1PERIPH_BASE + 0x8400UL) +#define SWPMI1_BASE (D2_APB1PERIPH_BASE + 0x8800UL) +#define OPAMP_BASE (D2_APB1PERIPH_BASE + 0x9000UL) +#define OPAMP1_BASE (D2_APB1PERIPH_BASE + 0x9000UL) +#define OPAMP2_BASE (D2_APB1PERIPH_BASE + 0x9010UL) +#define MDIOS_BASE (D2_APB1PERIPH_BASE + 0x9400UL) +#define FDCAN1_BASE (D2_APB1PERIPH_BASE + 0xA000UL) +#define FDCAN2_BASE (D2_APB1PERIPH_BASE + 0xA400UL) +#define FDCAN_CCU_BASE (D2_APB1PERIPH_BASE + 0xA800UL) +#define SRAMCAN_BASE (D2_APB1PERIPH_BASE + 0xAC00UL) + +/*!< D2_APB2PERIPH peripherals */ + +#define TIM1_BASE (D2_APB2PERIPH_BASE + 0x0000UL) +#define TIM8_BASE (D2_APB2PERIPH_BASE + 0x0400UL) +#define USART1_BASE (D2_APB2PERIPH_BASE + 0x1000UL) +#define USART6_BASE (D2_APB2PERIPH_BASE + 0x1400UL) +#define SPI1_BASE (D2_APB2PERIPH_BASE + 0x3000UL) +#define SPI4_BASE (D2_APB2PERIPH_BASE + 0x3400UL) +#define TIM15_BASE (D2_APB2PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (D2_APB2PERIPH_BASE + 0x4400UL) +#define TIM17_BASE (D2_APB2PERIPH_BASE + 0x4800UL) +#define SPI5_BASE (D2_APB2PERIPH_BASE + 0x5000UL) +#define SAI1_BASE (D2_APB2PERIPH_BASE + 0x5800UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024UL) +#define SAI2_BASE (D2_APB2PERIPH_BASE + 0x5C00UL) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x004UL) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x024UL) +#define SAI3_BASE (D2_APB2PERIPH_BASE + 0x6000UL) +#define SAI3_Block_A_BASE (SAI3_BASE + 0x004UL) +#define SAI3_Block_B_BASE (SAI3_BASE + 0x024UL) +#define DFSDM1_BASE (D2_APB2PERIPH_BASE + 0x7000UL) +#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x00UL) +#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x20UL) +#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x40UL) +#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x60UL) +#define DFSDM1_Channel4_BASE (DFSDM1_BASE + 0x80UL) +#define DFSDM1_Channel5_BASE (DFSDM1_BASE + 0xA0UL) +#define DFSDM1_Channel6_BASE (DFSDM1_BASE + 0xC0UL) +#define DFSDM1_Channel7_BASE (DFSDM1_BASE + 0xE0UL) +#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x100UL) +#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x180UL) +#define DFSDM1_Filter2_BASE (DFSDM1_BASE + 0x200UL) +#define DFSDM1_Filter3_BASE (DFSDM1_BASE + 0x280UL) +#define HRTIM1_BASE (D2_APB2PERIPH_BASE + 0x7400UL) +#define HRTIM1_TIMA_BASE (HRTIM1_BASE + 0x00000080UL) +#define HRTIM1_TIMB_BASE (HRTIM1_BASE + 0x00000100UL) +#define HRTIM1_TIMC_BASE (HRTIM1_BASE + 0x00000180UL) +#define HRTIM1_TIMD_BASE (HRTIM1_BASE + 0x00000200UL) +#define HRTIM1_TIME_BASE (HRTIM1_BASE + 0x00000280UL) +#define HRTIM1_COMMON_BASE (HRTIM1_BASE + 0x00000380UL) + + +/*!< D3_APB1PERIPH peripherals */ +#define EXTI_BASE (D3_APB1PERIPH_BASE + 0x0000UL) +#define EXTI_D1_BASE (EXTI_BASE + 0x0080UL) +#define EXTI_D2_BASE (EXTI_BASE + 0x00C0UL) +#define SYSCFG_BASE (D3_APB1PERIPH_BASE + 0x0400UL) +#define LPUART1_BASE (D3_APB1PERIPH_BASE + 0x0C00UL) +#define SPI6_BASE (D3_APB1PERIPH_BASE + 0x1400UL) +#define I2C4_BASE (D3_APB1PERIPH_BASE + 0x1C00UL) +#define LPTIM2_BASE (D3_APB1PERIPH_BASE + 0x2400UL) +#define LPTIM3_BASE (D3_APB1PERIPH_BASE + 0x2800UL) +#define LPTIM4_BASE (D3_APB1PERIPH_BASE + 0x2C00UL) +#define LPTIM5_BASE (D3_APB1PERIPH_BASE + 0x3000UL) +#define COMP12_BASE (D3_APB1PERIPH_BASE + 0x3800UL) +#define COMP1_BASE (COMP12_BASE + 0x0CUL) +#define COMP2_BASE (COMP12_BASE + 0x10UL) +#define VREFBUF_BASE (D3_APB1PERIPH_BASE + 0x3C00UL) +#define RTC_BASE (D3_APB1PERIPH_BASE + 0x4000UL) +#define IWDG1_BASE (D3_APB1PERIPH_BASE + 0x4800UL) + +#define IWDG2_BASE (D3_APB1PERIPH_BASE + 0x4C00UL) + +#define SAI4_BASE (D3_APB1PERIPH_BASE + 0x5400UL) +#define SAI4_Block_A_BASE (SAI4_BASE + 0x004UL) +#define SAI4_Block_B_BASE (SAI4_BASE + 0x024UL) + + + + +#define BDMA_Channel0_BASE (BDMA_BASE + 0x0008UL) +#define BDMA_Channel1_BASE (BDMA_BASE + 0x001CUL) +#define BDMA_Channel2_BASE (BDMA_BASE + 0x0030UL) +#define BDMA_Channel3_BASE (BDMA_BASE + 0x0044UL) +#define BDMA_Channel4_BASE (BDMA_BASE + 0x0058UL) +#define BDMA_Channel5_BASE (BDMA_BASE + 0x006CUL) +#define BDMA_Channel6_BASE (BDMA_BASE + 0x0080UL) +#define BDMA_Channel7_BASE (BDMA_BASE + 0x0094UL) + +#define DMAMUX2_Channel0_BASE (DMAMUX2_BASE) +#define DMAMUX2_Channel1_BASE (DMAMUX2_BASE + 0x0004UL) +#define DMAMUX2_Channel2_BASE (DMAMUX2_BASE + 0x0008UL) +#define DMAMUX2_Channel3_BASE (DMAMUX2_BASE + 0x000CUL) +#define DMAMUX2_Channel4_BASE (DMAMUX2_BASE + 0x0010UL) +#define DMAMUX2_Channel5_BASE (DMAMUX2_BASE + 0x0014UL) +#define DMAMUX2_Channel6_BASE (DMAMUX2_BASE + 0x0018UL) +#define DMAMUX2_Channel7_BASE (DMAMUX2_BASE + 0x001CUL) + +#define DMAMUX2_RequestGenerator0_BASE (DMAMUX2_BASE + 0x0100UL) +#define DMAMUX2_RequestGenerator1_BASE (DMAMUX2_BASE + 0x0104UL) +#define DMAMUX2_RequestGenerator2_BASE (DMAMUX2_BASE + 0x0108UL) +#define DMAMUX2_RequestGenerator3_BASE (DMAMUX2_BASE + 0x010CUL) +#define DMAMUX2_RequestGenerator4_BASE (DMAMUX2_BASE + 0x0110UL) +#define DMAMUX2_RequestGenerator5_BASE (DMAMUX2_BASE + 0x0114UL) +#define DMAMUX2_RequestGenerator6_BASE (DMAMUX2_BASE + 0x0118UL) +#define DMAMUX2_RequestGenerator7_BASE (DMAMUX2_BASE + 0x011CUL) + +#define DMAMUX2_ChannelStatus_BASE (DMAMUX2_BASE + 0x0080UL) +#define DMAMUX2_RequestGenStatus_BASE (DMAMUX2_BASE + 0x0140UL) + +#define DMA1_Stream0_BASE (DMA1_BASE + 0x010UL) +#define DMA1_Stream1_BASE (DMA1_BASE + 0x028UL) +#define DMA1_Stream2_BASE (DMA1_BASE + 0x040UL) +#define DMA1_Stream3_BASE (DMA1_BASE + 0x058UL) +#define DMA1_Stream4_BASE (DMA1_BASE + 0x070UL) +#define DMA1_Stream5_BASE (DMA1_BASE + 0x088UL) +#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0UL) +#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8UL) + +#define DMA2_Stream0_BASE (DMA2_BASE + 0x010UL) +#define DMA2_Stream1_BASE (DMA2_BASE + 0x028UL) +#define DMA2_Stream2_BASE (DMA2_BASE + 0x040UL) +#define DMA2_Stream3_BASE (DMA2_BASE + 0x058UL) +#define DMA2_Stream4_BASE (DMA2_BASE + 0x070UL) +#define DMA2_Stream5_BASE (DMA2_BASE + 0x088UL) +#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0UL) +#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x0004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x0008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x0010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x0014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x0018UL) +#define DMAMUX1_Channel7_BASE (DMAMUX1_BASE + 0x001CUL) +#define DMAMUX1_Channel8_BASE (DMAMUX1_BASE + 0x0020UL) +#define DMAMUX1_Channel9_BASE (DMAMUX1_BASE + 0x0024UL) +#define DMAMUX1_Channel10_BASE (DMAMUX1_BASE + 0x0028UL) +#define DMAMUX1_Channel11_BASE (DMAMUX1_BASE + 0x002CUL) +#define DMAMUX1_Channel12_BASE (DMAMUX1_BASE + 0x0030UL) +#define DMAMUX1_Channel13_BASE (DMAMUX1_BASE + 0x0034UL) +#define DMAMUX1_Channel14_BASE (DMAMUX1_BASE + 0x0038UL) +#define DMAMUX1_Channel15_BASE (DMAMUX1_BASE + 0x003CUL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x0100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x0104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x0108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x010CUL) +#define DMAMUX1_RequestGenerator4_BASE (DMAMUX1_BASE + 0x0110UL) +#define DMAMUX1_RequestGenerator5_BASE (DMAMUX1_BASE + 0x0114UL) +#define DMAMUX1_RequestGenerator6_BASE (DMAMUX1_BASE + 0x0118UL) +#define DMAMUX1_RequestGenerator7_BASE (DMAMUX1_BASE + 0x011CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x0080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x0140UL) + +/*!< FMC Banks registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) +#define FMC_Bank2_R_BASE (FMC_R_BASE + 0x0060UL) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0x5C001000UL) + +#define MDMA_Channel0_BASE (MDMA_BASE + 0x00000040UL) +#define MDMA_Channel1_BASE (MDMA_BASE + 0x00000080UL) +#define MDMA_Channel2_BASE (MDMA_BASE + 0x000000C0UL) +#define MDMA_Channel3_BASE (MDMA_BASE + 0x00000100UL) +#define MDMA_Channel4_BASE (MDMA_BASE + 0x00000140UL) +#define MDMA_Channel5_BASE (MDMA_BASE + 0x00000180UL) +#define MDMA_Channel6_BASE (MDMA_BASE + 0x000001C0UL) +#define MDMA_Channel7_BASE (MDMA_BASE + 0x00000200UL) +#define MDMA_Channel8_BASE (MDMA_BASE + 0x00000240UL) +#define MDMA_Channel9_BASE (MDMA_BASE + 0x00000280UL) +#define MDMA_Channel10_BASE (MDMA_BASE + 0x000002C0UL) +#define MDMA_Channel11_BASE (MDMA_BASE + 0x00000300UL) +#define MDMA_Channel12_BASE (MDMA_BASE + 0x00000340UL) +#define MDMA_Channel13_BASE (MDMA_BASE + 0x00000380UL) +#define MDMA_Channel14_BASE (MDMA_BASE + 0x000003C0UL) +#define MDMA_Channel15_BASE (MDMA_BASE + 0x00000400UL) + +#define RAMECC1_Monitor1_BASE (RAMECC1_BASE + 0x20UL) +#define RAMECC1_Monitor2_BASE (RAMECC1_BASE + 0x40UL) +#define RAMECC1_Monitor3_BASE (RAMECC1_BASE + 0x60UL) +#define RAMECC1_Monitor4_BASE (RAMECC1_BASE + 0x80UL) +#define RAMECC1_Monitor5_BASE (RAMECC1_BASE + 0xA0UL) + +#define RAMECC2_Monitor1_BASE (RAMECC2_BASE + 0x20UL) +#define RAMECC2_Monitor2_BASE (RAMECC2_BASE + 0x40UL) +#define RAMECC2_Monitor3_BASE (RAMECC2_BASE + 0x60UL) +#define RAMECC2_Monitor4_BASE (RAMECC2_BASE + 0x80UL) +#define RAMECC2_Monitor5_BASE (RAMECC2_BASE + 0xA0UL) + +#define RAMECC3_Monitor1_BASE (RAMECC3_BASE + 0x20UL) +#define RAMECC3_Monitor2_BASE (RAMECC3_BASE + 0x40UL) + + + +#define GPV_BASE (PERIPH_BASE + 0x11000000UL) /*!< GPV_BASE (PERIPH_BASE + 0x11000000UL) */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG1 ((WWDG_TypeDef *) WWDG1_BASE) + +#define WWDG2 ((WWDG_TypeDef *) WWDG2_BASE) +#define IWDG2 ((IWDG_TypeDef *) IWDG2_BASE) + +#define IWDG1 ((IWDG_TypeDef *) IWDG1_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define USART6 ((USART_TypeDef *) USART6_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I2C4 ((I2C_TypeDef *) I2C4_BASE) +#define FDCAN1 ((FDCAN_GlobalTypeDef *) FDCAN1_BASE) +#define FDCAN2 ((FDCAN_GlobalTypeDef *) FDCAN2_BASE) +#define FDCAN_CCU ((FDCAN_ClockCalibrationUnit_TypeDef *) FDCAN_CCU_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define SWPMI1 ((SWPMI_TypeDef *) SWPMI1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define LPTIM3 ((LPTIM_TypeDef *) LPTIM3_BASE) +#define LPTIM4 ((LPTIM_TypeDef *) LPTIM4_BASE) +#define LPTIM5 ((LPTIM_TypeDef *) LPTIM5_BASE) + +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define COMP12 ((COMPOPT_TypeDef *) COMP12_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP2_BASE) +#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) +#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE) +#define OPAMP2 ((OPAMP_TypeDef *) OPAMP2_BASE) + + +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define EXTI_D1 ((EXTI_Core_TypeDef *) EXTI_D1_BASE) +#define EXTI_D2 ((EXTI_Core_TypeDef *) EXTI_D2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define HRTIM1 ((HRTIM_TypeDef *) HRTIM1_BASE) +#define HRTIM1_TIMA ((HRTIM_Timerx_TypeDef *) HRTIM1_TIMA_BASE) +#define HRTIM1_TIMB ((HRTIM_Timerx_TypeDef *) HRTIM1_TIMB_BASE) +#define HRTIM1_TIMC ((HRTIM_Timerx_TypeDef *) HRTIM1_TIMC_BASE) +#define HRTIM1_TIMD ((HRTIM_Timerx_TypeDef *) HRTIM1_TIMD_BASE) +#define HRTIM1_TIME ((HRTIM_Timerx_TypeDef *) HRTIM1_TIME_BASE) +#define HRTIM1_COMMON ((HRTIM_Common_TypeDef *) HRTIM1_COMMON_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) +#define SAI3 ((SAI_TypeDef *) SAI3_BASE) +#define SAI3_Block_A ((SAI_Block_TypeDef *)SAI3_Block_A_BASE) +#define SAI3_Block_B ((SAI_Block_TypeDef *)SAI3_Block_B_BASE) +#define SAI4 ((SAI_TypeDef *) SAI4_BASE) +#define SAI4_Block_A ((SAI_Block_TypeDef *)SAI4_Block_A_BASE) +#define SAI4_Block_B ((SAI_Block_TypeDef *)SAI4_Block_B_BASE) + +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE) +#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE) +#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE) +#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE) +#define DFSDM1_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel4_BASE) +#define DFSDM1_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel5_BASE) +#define DFSDM1_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel6_BASE) +#define DFSDM1_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel7_BASE) +#define DFSDM1_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter0_BASE) +#define DFSDM1_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter1_BASE) +#define DFSDM1_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter2_BASE) +#define DFSDM1_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter3_BASE) +#define DMA2D ((DMA2D_TypeDef *) DMA2D_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define RCC_C1 ((RCC_Core_TypeDef *) RCC_C1_BASE) +#define RCC_C2 ((RCC_Core_TypeDef *) RCC_C2_BASE) + +#define ART ((ART_TypeDef *) ART_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) + +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) +#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define ADC3_COMMON ((ADC_Common_TypeDef *) ADC3_COMMON_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *) ADC12_COMMON_BASE) + +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) +#define DLYB_SDMMC2 ((DLYB_TypeDef *) DLYB_SDMMC2_BASE) + +#define BDMA ((BDMA_TypeDef *) BDMA_BASE) +#define BDMA_Channel0 ((BDMA_Channel_TypeDef *) BDMA_Channel0_BASE) +#define BDMA_Channel1 ((BDMA_Channel_TypeDef *) BDMA_Channel1_BASE) +#define BDMA_Channel2 ((BDMA_Channel_TypeDef *) BDMA_Channel2_BASE) +#define BDMA_Channel3 ((BDMA_Channel_TypeDef *) BDMA_Channel3_BASE) +#define BDMA_Channel4 ((BDMA_Channel_TypeDef *) BDMA_Channel4_BASE) +#define BDMA_Channel5 ((BDMA_Channel_TypeDef *) BDMA_Channel5_BASE) +#define BDMA_Channel6 ((BDMA_Channel_TypeDef *) BDMA_Channel6_BASE) +#define BDMA_Channel7 ((BDMA_Channel_TypeDef *) BDMA_Channel7_BASE) + +#define RAMECC1 ((RAMECC_TypeDef *)RAMECC1_BASE) +#define RAMECC1_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor1_BASE) +#define RAMECC1_Monitor2 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor2_BASE) +#define RAMECC1_Monitor3 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor3_BASE) +#define RAMECC1_Monitor4 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor4_BASE) +#define RAMECC1_Monitor5 ((RAMECC_MonitorTypeDef *)RAMECC1_Monitor5_BASE) + +#define RAMECC2 ((RAMECC_TypeDef *)RAMECC2_BASE) +#define RAMECC2_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor1_BASE) +#define RAMECC2_Monitor2 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor2_BASE) +#define RAMECC2_Monitor3 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor3_BASE) +#define RAMECC2_Monitor4 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor4_BASE) +#define RAMECC2_Monitor5 ((RAMECC_MonitorTypeDef *)RAMECC2_Monitor5_BASE) + +#define RAMECC3 ((RAMECC_TypeDef *)RAMECC3_BASE) +#define RAMECC3_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC3_Monitor1_BASE) +#define RAMECC3_Monitor2 ((RAMECC_MonitorTypeDef *)RAMECC3_Monitor2_BASE) + +#define DMAMUX2 ((DMAMUX_Channel_TypeDef *) DMAMUX2_BASE) +#define DMAMUX2_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel0_BASE) +#define DMAMUX2_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel1_BASE) +#define DMAMUX2_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel2_BASE) +#define DMAMUX2_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel3_BASE) +#define DMAMUX2_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel4_BASE) +#define DMAMUX2_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel5_BASE) +#define DMAMUX2_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel6_BASE) +#define DMAMUX2_Channel7 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel7_BASE) + + +#define DMAMUX2_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator0_BASE) +#define DMAMUX2_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator1_BASE) +#define DMAMUX2_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator2_BASE) +#define DMAMUX2_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator3_BASE) +#define DMAMUX2_RequestGenerator4 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator4_BASE) +#define DMAMUX2_RequestGenerator5 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator5_BASE) +#define DMAMUX2_RequestGenerator6 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator6_BASE) +#define DMAMUX2_RequestGenerator7 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator7_BASE) + +#define DMAMUX2_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX2_ChannelStatus_BASE) +#define DMAMUX2_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX2_RequestGenStatus_BASE) + +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) +#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) +#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) +#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) +#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) +#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) +#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) +#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) + +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) +#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) +#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) +#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) +#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) +#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) +#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) +#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) + + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) +#define DMAMUX1_Channel7 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel7_BASE) +#define DMAMUX1_Channel8 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel8_BASE) +#define DMAMUX1_Channel9 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel9_BASE) +#define DMAMUX1_Channel10 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel10_BASE) +#define DMAMUX1_Channel11 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel11_BASE) +#define DMAMUX1_Channel12 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel12_BASE) +#define DMAMUX1_Channel13 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel13_BASE) +#define DMAMUX1_Channel14 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel14_BASE) +#define DMAMUX1_Channel15 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel15_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) +#define DMAMUX1_RequestGenerator4 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator4_BASE) +#define DMAMUX1_RequestGenerator5 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator5_BASE) +#define DMAMUX1_RequestGenerator6 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator6_BASE) +#define DMAMUX1_RequestGenerator7 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator7_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + + +#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank2_R ((FMC_Bank2_TypeDef *) FMC_Bank2_R_BASE) +#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6_R ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) + + +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) +#define DLYB_QUADSPI ((DLYB_TypeDef *) DLYB_QSPI_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define DLYB_SDMMC1 ((DLYB_TypeDef *) DLYB_SDMMC1_BASE) + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +#define JPEG ((JPEG_TypeDef *) JPGDEC_BASE) +#define HSEM ((HSEM_TypeDef *) HSEM_BASE) +#if defined(CORE_CM4) +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x110UL)) +#else /* CORE_CM7 */ +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x100UL)) +#endif /* CORE_CM4 */ + +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) +#define DSI ((DSI_TypeDef *)DSI_BASE) + +#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE) + +#define ETH ((ETH_TypeDef *)ETH_BASE) +#define MDMA ((MDMA_TypeDef *)MDMA_BASE) +#define MDMA_Channel0 ((MDMA_Channel_TypeDef *)MDMA_Channel0_BASE) +#define MDMA_Channel1 ((MDMA_Channel_TypeDef *)MDMA_Channel1_BASE) +#define MDMA_Channel2 ((MDMA_Channel_TypeDef *)MDMA_Channel2_BASE) +#define MDMA_Channel3 ((MDMA_Channel_TypeDef *)MDMA_Channel3_BASE) +#define MDMA_Channel4 ((MDMA_Channel_TypeDef *)MDMA_Channel4_BASE) +#define MDMA_Channel5 ((MDMA_Channel_TypeDef *)MDMA_Channel5_BASE) +#define MDMA_Channel6 ((MDMA_Channel_TypeDef *)MDMA_Channel6_BASE) +#define MDMA_Channel7 ((MDMA_Channel_TypeDef *)MDMA_Channel7_BASE) +#define MDMA_Channel8 ((MDMA_Channel_TypeDef *)MDMA_Channel8_BASE) +#define MDMA_Channel9 ((MDMA_Channel_TypeDef *)MDMA_Channel9_BASE) +#define MDMA_Channel10 ((MDMA_Channel_TypeDef *)MDMA_Channel10_BASE) +#define MDMA_Channel11 ((MDMA_Channel_TypeDef *)MDMA_Channel11_BASE) +#define MDMA_Channel12 ((MDMA_Channel_TypeDef *)MDMA_Channel12_BASE) +#define MDMA_Channel13 ((MDMA_Channel_TypeDef *)MDMA_Channel13_BASE) +#define MDMA_Channel14 ((MDMA_Channel_TypeDef *)MDMA_Channel14_BASE) +#define MDMA_Channel15 ((MDMA_Channel_TypeDef *)MDMA_Channel15_BASE) + + +#define USB1_OTG_HS ((USB_OTG_GlobalTypeDef *) USB1_OTG_HS_PERIPH_BASE) +#define USB2_OTG_FS ((USB_OTG_GlobalTypeDef *) USB2_OTG_FS_PERIPH_BASE) + +/* Legacy defines */ +#define USB_OTG_HS USB1_OTG_HS +#define USB_OTG_HS_PERIPH_BASE USB1_OTG_HS_PERIPH_BASE +#define USB_OTG_FS USB2_OTG_FS +#define USB_OTG_FS_PERIPH_BASE USB2_OTG_FS_PERIPH_BASE + +#define GPV ((GPV_TypeDef *) GPV_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ + + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************************* ADC VERSION ********************************/ +#define ADC_VER_V5_X +/******************** Bit definition for ADC_ISR register ********************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC Ready (ADRDY) flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC End of Sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC End of Regular Conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC End of Injected Conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC End of Injected sequence of Conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC Analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC Analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC Analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC Injected Context Queue Overflow flag */ +#define ADC_ISR_LDORDY_Pos (12U) +#define ADC_ISR_LDORDY_Msk (0x1UL << ADC_ISR_LDORDY_Pos) /*!< 0x00001000 */ +#define ADC_ISR_LDORDY ADC_ISR_LDORDY_Msk /*!< ADC LDO output voltage ready bit */ + +/******************** Bit definition for ADC_IER register ********************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC Ready (ADRDY) interrupt source */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC End of Sampling interrupt source */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC End of Regular Conversion interrupt source */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC End of Regular sequence of Conversions interrupt source */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC overrun interrupt source */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC End of Injected Conversion interrupt source */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC End of Injected sequence of Conversions interrupt source */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC Analog watchdog 1 interrupt source */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC Analog watchdog 2 interrupt source */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC Analog watchdog 3 interrupt source */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC Injected Context Queue Overflow interrupt source */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC Enable control */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC Disable command */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC Start of Regular conversion */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC Start of injected conversion */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC Stop of Regular conversion */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC Stop of injected conversion */ +#define ADC_CR_BOOST_Pos (8U) +#define ADC_CR_BOOST_Msk (0x3UL << ADC_CR_BOOST_Pos) /*!< 0x00000300 */ +#define ADC_CR_BOOST ADC_CR_BOOST_Msk /*!< ADC Boost Mode configuration */ +#define ADC_CR_BOOST_0 (0x1UL << ADC_CR_BOOST_Pos) /*!< 0x00000100 */ +#define ADC_CR_BOOST_1 (0x2UL << ADC_CR_BOOST_Pos) /*!< 0x00000200 */ +#define ADC_CR_ADCALLIN_Pos (16U) +#define ADC_CR_ADCALLIN_Msk (0x1UL << ADC_CR_ADCALLIN_Pos) /*!< 0x00010000 */ +#define ADC_CR_ADCALLIN ADC_CR_ADCALLIN_Msk /*!< ADC Linearity calibration */ +#define ADC_CR_LINCALRDYW1_Pos (22U) +#define ADC_CR_LINCALRDYW1_Msk (0x1UL << ADC_CR_LINCALRDYW1_Pos) /*!< 0x00400000 */ +#define ADC_CR_LINCALRDYW1 ADC_CR_LINCALRDYW1_Msk /*!< ADC Linearity calibration ready Word 1 */ +#define ADC_CR_LINCALRDYW2_Pos (23U) +#define ADC_CR_LINCALRDYW2_Msk (0x1UL << ADC_CR_LINCALRDYW2_Pos) /*!< 0x00800000 */ +#define ADC_CR_LINCALRDYW2 ADC_CR_LINCALRDYW2_Msk /*!< ADC Linearity calibration ready Word 2 */ +#define ADC_CR_LINCALRDYW3_Pos (24U) +#define ADC_CR_LINCALRDYW3_Msk (0x1UL << ADC_CR_LINCALRDYW3_Pos) /*!< 0x01000000 */ +#define ADC_CR_LINCALRDYW3 ADC_CR_LINCALRDYW3_Msk /*!< ADC Linearity calibration ready Word 3 */ +#define ADC_CR_LINCALRDYW4_Pos (25U) +#define ADC_CR_LINCALRDYW4_Msk (0x1UL << ADC_CR_LINCALRDYW4_Pos) /*!< 0x02000000 */ +#define ADC_CR_LINCALRDYW4 ADC_CR_LINCALRDYW4_Msk /*!< ADC Linearity calibration ready Word 4 */ +#define ADC_CR_LINCALRDYW5_Pos (26U) +#define ADC_CR_LINCALRDYW5_Msk (0x1UL << ADC_CR_LINCALRDYW5_Pos) /*!< 0x04000000 */ +#define ADC_CR_LINCALRDYW5 ADC_CR_LINCALRDYW5_Msk /*!< ADC Linearity calibration ready Word 5 */ +#define ADC_CR_LINCALRDYW6_Pos (27U) +#define ADC_CR_LINCALRDYW6_Msk (0x1UL << ADC_CR_LINCALRDYW6_Pos) /*!< 0x08000000 */ +#define ADC_CR_LINCALRDYW6 ADC_CR_LINCALRDYW6_Msk /*!< ADC Linearity calibration ready Word 6 */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC Voltage regulator Enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC Deep power down Enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC Differential Mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC Calibration */ + +/******************** Bit definition for ADC_CFGR register ********************/ +#define ADC_CFGR_DMNGT_Pos (0U) +#define ADC_CFGR_DMNGT_Msk (0x3UL << ADC_CFGR_DMNGT_Pos) /*!< 0x00000003 */ +#define ADC_CFGR_DMNGT ADC_CFGR_DMNGT_Msk /*!< ADC Data Management configuration */ +#define ADC_CFGR_DMNGT_0 (0x1UL << ADC_CFGR_DMNGT_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMNGT_1 (0x2UL << ADC_CFGR_DMNGT_Pos) /*!< 0x00000002 */ + +#define ADC_CFGR_RES_Pos (2U) +#define ADC_CFGR_RES_Msk (0x7UL << ADC_CFGR_RES_Pos) /*!< 0x0000001C */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC Data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000004 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_2 (0x4UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_EXTSEL_Pos (5U) +#define ADC_CFGR_EXTSEL_Msk (0x1FUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003E0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC External trigger selection for regular group */ +#define ADC_CFGR_EXTSEL_0 (0x01UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_EXTSEL_1 (0x02UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_2 (0x04UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_3 (0x08UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_4 (0x10UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC External trigger enable and polarity selection for regular channels */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC overrun mode */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC Single/continuous conversion mode for regular conversion */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC Delayed conversion mode */ + +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC Discontinuous mode for regular channels */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC Discontinuous mode channel count */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC Discontinuous mode on injected channels */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC JSQR Queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< Enable the watchdog 1 on a single channel or on all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC Analog watchdog 1 enable on regular Channels */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC Analog watchdog 1 enable on injected Channels */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC Automatic injected group conversion */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC Analog watchdog 1 Channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC Injected queue disable */ + +/******************** Bit definition for ADC_CFGR2 register ********************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC Regular group oversampler enable */ +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC Injected group oversampler enable */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC Regular Oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC Triggered regular Oversampling */ +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC Regular oversampling mode */ + +#define ADC_CFGR2_RSHIFT1_Pos (11U) +#define ADC_CFGR2_RSHIFT1_Msk (0x1UL << ADC_CFGR2_RSHIFT1_Pos) /*!< 0x00000800 */ +#define ADC_CFGR2_RSHIFT1 ADC_CFGR2_RSHIFT1_Msk /*!< ADC Right-shift data after Offset 1 correction */ +#define ADC_CFGR2_RSHIFT2_Pos (12U) +#define ADC_CFGR2_RSHIFT2_Msk (0x1UL << ADC_CFGR2_RSHIFT2_Pos) /*!< 0x00001000 */ +#define ADC_CFGR2_RSHIFT2 ADC_CFGR2_RSHIFT2_Msk /*!< ADC Right-shift data after Offset 2 correction */ +#define ADC_CFGR2_RSHIFT3_Pos (13U) +#define ADC_CFGR2_RSHIFT3_Msk (0x1UL << ADC_CFGR2_RSHIFT3_Pos) /*!< 0x00002000 */ +#define ADC_CFGR2_RSHIFT3 ADC_CFGR2_RSHIFT3_Msk /*!< ADC Right-shift data after Offset 3 correction */ +#define ADC_CFGR2_RSHIFT4_Pos (14U) +#define ADC_CFGR2_RSHIFT4_Msk (0x1UL << ADC_CFGR2_RSHIFT4_Pos) /*!< 0x00004000 */ +#define ADC_CFGR2_RSHIFT4 ADC_CFGR2_RSHIFT4_Msk /*!< ADC Right-shift data after Offset 4 correction */ + +#define ADC_CFGR2_OVSR_Pos (16U) +#define ADC_CFGR2_OVSR_Msk (0x3FFUL << ADC_CFGR2_OVSR_Pos) /*!< 0x03FF0000 */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling Ratio */ +#define ADC_CFGR2_OVSR_0 (0x001UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00010000 */ +#define ADC_CFGR2_OVSR_1 (0x002UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00020000 */ +#define ADC_CFGR2_OVSR_2 (0x004UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00040000 */ +#define ADC_CFGR2_OVSR_3 (0x008UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00080000 */ +#define ADC_CFGR2_OVSR_4 (0x010UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00100000 */ +#define ADC_CFGR2_OVSR_5 (0x020UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00200000 */ +#define ADC_CFGR2_OVSR_6 (0x040UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00400000 */ +#define ADC_CFGR2_OVSR_7 (0x080UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00800000 */ +#define ADC_CFGR2_OVSR_8 (0x100UL << ADC_CFGR2_OVSR_Pos) /*!< 0x01000000 */ +#define ADC_CFGR2_OVSR_9 (0x200UL << ADC_CFGR2_OVSR_Pos) /*!< 0x02000000 */ + +#define ADC_CFGR2_LSHIFT_Pos (28U) +#define ADC_CFGR2_LSHIFT_Msk (0xFUL << ADC_CFGR2_LSHIFT_Pos) /*!< 0xF0000000 */ +#define ADC_CFGR2_LSHIFT ADC_CFGR2_LSHIFT_Msk /*!< ADC Left shift factor */ +#define ADC_CFGR2_LSHIFT_0 (0x1UL << ADC_CFGR2_LSHIFT_Pos) /*!< 0x10000000 */ +#define ADC_CFGR2_LSHIFT_1 (0x2UL << ADC_CFGR2_LSHIFT_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LSHIFT_2 (0x4UL << ADC_CFGR2_LSHIFT_Pos) /*!< 0x40000000 */ +#define ADC_CFGR2_LSHIFT_3 (0x8UL << ADC_CFGR2_LSHIFT_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_SMPR1 register ********************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC Channel 0 Sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC Channel 1 Sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC Channel 2 Sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC Channel 3 Sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC Channel 4 Sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC Channel 5 Sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC Channel 6 Sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC Channel 7 Sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC Channel 8 Sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC Channel 9 Sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for ADC_SMPR2 register ********************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC Channel 10 Sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC Channel 11 Sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC Channel 12 Sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC Channel 13 Sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC Channel 14 Sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC Channel 15 Sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC Channel 16 Sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC Channel 17 Sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC Channel 18 Sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP19_Pos (27U) +#define ADC_SMPR2_SMP19_Msk (0x7UL << ADC_SMPR2_SMP19_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP19 ADC_SMPR2_SMP19_Msk /*!< ADC Channel 19 Sampling time selection */ +#define ADC_SMPR2_SMP19_0 (0x1UL << ADC_SMPR2_SMP19_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP19_1 (0x2UL << ADC_SMPR2_SMP19_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP19_2 (0x4UL << ADC_SMPR2_SMP19_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for ADC_PCSEL register ********************/ +#define ADC_PCSEL_PCSEL_Pos (0U) +#define ADC_PCSEL_PCSEL_Msk (0xFFFFFUL << ADC_PCSEL_PCSEL_Pos) /*!< 0x000FFFFF */ +#define ADC_PCSEL_PCSEL ADC_PCSEL_PCSEL_Msk /*!< ADC pre channel selection */ +#define ADC_PCSEL_PCSEL_0 (0x00001UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000001 */ +#define ADC_PCSEL_PCSEL_1 (0x00002UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000002 */ +#define ADC_PCSEL_PCSEL_2 (0x00004UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000004 */ +#define ADC_PCSEL_PCSEL_3 (0x00008UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000008 */ +#define ADC_PCSEL_PCSEL_4 (0x00010UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000010 */ +#define ADC_PCSEL_PCSEL_5 (0x00020UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000020 */ +#define ADC_PCSEL_PCSEL_6 (0x00040UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000040 */ +#define ADC_PCSEL_PCSEL_7 (0x00080UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000080 */ +#define ADC_PCSEL_PCSEL_8 (0x00100UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000100 */ +#define ADC_PCSEL_PCSEL_9 (0x00200UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000200 */ +#define ADC_PCSEL_PCSEL_10 (0x00400UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000400 */ +#define ADC_PCSEL_PCSEL_11 (0x00800UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000800 */ +#define ADC_PCSEL_PCSEL_12 (0x01000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00001000 */ +#define ADC_PCSEL_PCSEL_13 (0x02000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00002000 */ +#define ADC_PCSEL_PCSEL_14 (0x04000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00004000 */ +#define ADC_PCSEL_PCSEL_15 (0x08000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00008000 */ +#define ADC_PCSEL_PCSEL_16 (0x10000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00010000 */ +#define ADC_PCSEL_PCSEL_17 (0x20000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00020000 */ +#define ADC_PCSEL_PCSEL_18 (0x40000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00040000 */ +#define ADC_PCSEL_PCSEL_19 (0x80000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00080000 */ + +/***************** Bit definition for ADC_LTR1, 2, 3 registers *****************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0x3FFFFFFUL << ADC_LTR_LT_Pos) /*!< 0x03FFFFFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC Analog watchdog 1, 2 and 3 lower threshold */ + +/***************** Bit definition for ADC_HTR1, 2, 3 registers ****************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0x3FFFFFFUL << ADC_HTR_HT_Pos) /*!< 0x03FFFFFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC Analog watchdog 1,2 and 3 higher threshold */ + + +/******************** Bit definition for ADC_SQR1 register ********************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC regular channel sequence length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC 1st conversion in regular sequence */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC 2nd conversion in regular sequence */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC 3rd conversion in regular sequence */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC 4th conversion in regular sequence */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ********************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC 5th conversion in regular sequence */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC 6th conversion in regular sequence */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC 7th conversion in regular sequence */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC 8th conversion in regular sequence */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC 9th conversion in regular sequence */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ********************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC 10th conversion in regular sequence */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC 11th conversion in regular sequence */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC 12th conversion in regular sequence */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC 13th conversion in regular sequence */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC 14th conversion in regular sequence */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ********************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC 15th conversion in regular sequence */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC 16th conversion in regular sequence */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFFFFFUL << ADC_DR_RDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC regular Data converted */ + +/******************** Bit definition for ADC_JSQR register ********************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC injected channel sequence length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0x1FUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000007C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC external trigger selection for injected group */ +#define ADC_JSQR_JEXTSEL_0 (0x01UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x02UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x04UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x08UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JEXTSEL_4 (0x10UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000040 */ + +#define ADC_JSQR_JEXTEN_Pos (7U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000180 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC external trigger enable and polarity selection for injected channels */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000100 */ + +#define ADC_JSQR_JSQ1_Pos (9U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00003E00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC 1st conversion in injected sequence */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00002000 */ + +#define ADC_JSQR_JSQ2_Pos (15U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC 2nd conversion in injected sequence */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JSQ3_Pos (21U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x03E00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC 3rd conversion in injected sequence */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x02000000 */ + +#define ADC_JSQR_JSQ4_Pos (27U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0xF8000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC 4th conversion in injected sequence */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_OFR1 register ********************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0x3FFFFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x03FFFFFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC data offset 1 for channel programmed into bits OFFSET1_CH[4:0] */ +#define ADC_OFR1_OFFSET1_0 (0x0000001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ +#define ADC_OFR1_OFFSET1_1 (0x0000002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ +#define ADC_OFR1_OFFSET1_2 (0x0000004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ +#define ADC_OFR1_OFFSET1_3 (0x0000008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ +#define ADC_OFR1_OFFSET1_4 (0x0000010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ +#define ADC_OFR1_OFFSET1_5 (0x0000020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ +#define ADC_OFR1_OFFSET1_6 (0x0000040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ +#define ADC_OFR1_OFFSET1_7 (0x0000080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ +#define ADC_OFR1_OFFSET1_8 (0x0000100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ +#define ADC_OFR1_OFFSET1_9 (0x0000200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ +#define ADC_OFR1_OFFSET1_10 (0x0000400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ +#define ADC_OFR1_OFFSET1_11 (0x0000800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ +#define ADC_OFR1_OFFSET1_12 (0x0001000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00001000 */ +#define ADC_OFR1_OFFSET1_13 (0x0002000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00002000 */ +#define ADC_OFR1_OFFSET1_14 (0x0004000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00004000 */ +#define ADC_OFR1_OFFSET1_15 (0x0008000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00008000 */ +#define ADC_OFR1_OFFSET1_16 (0x0010000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00010000 */ +#define ADC_OFR1_OFFSET1_17 (0x0020000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00020000 */ +#define ADC_OFR1_OFFSET1_18 (0x0040000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00040000 */ +#define ADC_OFR1_OFFSET1_19 (0x0080000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00080000 */ +#define ADC_OFR1_OFFSET1_20 (0x0100000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00100000 */ +#define ADC_OFR1_OFFSET1_21 (0x0200000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00200000 */ +#define ADC_OFR1_OFFSET1_22 (0x0400000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00400000 */ +#define ADC_OFR1_OFFSET1_23 (0x0800000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00800000 */ +#define ADC_OFR1_OFFSET1_24 (0x1000000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x01000000 */ +#define ADC_OFR1_OFFSET1_25 (0x2000000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x02000000 */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC Channel selection for the data offset 1 */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_SSATE_Pos (31U) +#define ADC_OFR1_SSATE_Msk (0x1UL << ADC_OFR1_SSATE_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_SSATE ADC_OFR1_SSATE_Msk /*!< ADC Signed saturation Enable */ + + +/******************** Bit definition for ADC_OFR2 register ********************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0x3FFFFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x03FFFFFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC data offset 2 for channel programmed into bits OFFSET2_CH[4:0] */ +#define ADC_OFR2_OFFSET2_0 (0x0000001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ +#define ADC_OFR2_OFFSET2_1 (0x0000002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ +#define ADC_OFR2_OFFSET2_2 (0x0000004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ +#define ADC_OFR2_OFFSET2_3 (0x0000008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ +#define ADC_OFR2_OFFSET2_4 (0x0000010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ +#define ADC_OFR2_OFFSET2_5 (0x0000020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ +#define ADC_OFR2_OFFSET2_6 (0x0000040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ +#define ADC_OFR2_OFFSET2_7 (0x0000080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ +#define ADC_OFR2_OFFSET2_8 (0x0000100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ +#define ADC_OFR2_OFFSET2_9 (0x0000200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ +#define ADC_OFR2_OFFSET2_10 (0x0000400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ +#define ADC_OFR2_OFFSET2_11 (0x0000800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ +#define ADC_OFR2_OFFSET2_12 (0x0001000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00001000 */ +#define ADC_OFR2_OFFSET2_13 (0x0002000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00002000 */ +#define ADC_OFR2_OFFSET2_14 (0x0004000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00004000 */ +#define ADC_OFR2_OFFSET2_15 (0x0008000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00008000 */ +#define ADC_OFR2_OFFSET2_16 (0x0010000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00010000 */ +#define ADC_OFR2_OFFSET2_17 (0x0020000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00020000 */ +#define ADC_OFR2_OFFSET2_18 (0x0040000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00040000 */ +#define ADC_OFR2_OFFSET2_19 (0x0080000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00080000 */ +#define ADC_OFR2_OFFSET2_20 (0x0100000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00100000 */ +#define ADC_OFR2_OFFSET2_21 (0x0200000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00200000 */ +#define ADC_OFR2_OFFSET2_22 (0x0400000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00400000 */ +#define ADC_OFR2_OFFSET2_23 (0x0800000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00800000 */ +#define ADC_OFR2_OFFSET2_24 (0x1000000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x01000000 */ +#define ADC_OFR2_OFFSET2_25 (0x2000000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x02000000 */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC Channel selection for the data offset 2 */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_SSATE_Pos (31U) +#define ADC_OFR2_SSATE_Msk (0x1UL << ADC_OFR2_SSATE_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_SSATE ADC_OFR2_SSATE_Msk /*!< ADC Signed saturation Enable */ + + +/******************** Bit definition for ADC_OFR3 register ********************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0x3FFFFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x03FFFFFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC data offset 3 for channel programmed into bits OFFSET3_CH[4:0] */ +#define ADC_OFR3_OFFSET3_0 (0x0000001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ +#define ADC_OFR3_OFFSET3_1 (0x0000002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ +#define ADC_OFR3_OFFSET3_2 (0x0000004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ +#define ADC_OFR3_OFFSET3_3 (0x0000008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ +#define ADC_OFR3_OFFSET3_4 (0x0000010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ +#define ADC_OFR3_OFFSET3_5 (0x0000020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ +#define ADC_OFR3_OFFSET3_6 (0x0000040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ +#define ADC_OFR3_OFFSET3_7 (0x0000080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ +#define ADC_OFR3_OFFSET3_8 (0x0000100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ +#define ADC_OFR3_OFFSET3_9 (0x0000200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ +#define ADC_OFR3_OFFSET3_10 (0x0000400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ +#define ADC_OFR3_OFFSET3_11 (0x0000800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ +#define ADC_OFR3_OFFSET3_12 (0x0001000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00001000 */ +#define ADC_OFR3_OFFSET3_13 (0x0002000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00002000 */ +#define ADC_OFR3_OFFSET3_14 (0x0004000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00004000 */ +#define ADC_OFR3_OFFSET3_15 (0x0008000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00008000 */ +#define ADC_OFR3_OFFSET3_16 (0x0010000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00010000 */ +#define ADC_OFR3_OFFSET3_17 (0x0020000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00020000 */ +#define ADC_OFR3_OFFSET3_18 (0x0040000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00040000 */ +#define ADC_OFR3_OFFSET3_19 (0x0080000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00080000 */ +#define ADC_OFR3_OFFSET3_20 (0x0100000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00100000 */ +#define ADC_OFR3_OFFSET3_21 (0x0200000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00200000 */ +#define ADC_OFR3_OFFSET3_22 (0x0400000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00400000 */ +#define ADC_OFR3_OFFSET3_23 (0x0800000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00800000 */ +#define ADC_OFR3_OFFSET3_24 (0x1000000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x01000000 */ +#define ADC_OFR3_OFFSET3_25 (0x2000000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x02000000 */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC Channel selection for the data offset 3 */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_SSATE_Pos (31U) +#define ADC_OFR3_SSATE_Msk (0x1UL << ADC_OFR3_SSATE_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_SSATE ADC_OFR3_SSATE_Msk /*!< ADC Signed saturation Enable */ + + +/******************** Bit definition for ADC_OFR4 register ********************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0x3FFFFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x03FFFFFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC data offset 4 for channel programmed into bits OFFSET4_CH[4:0] */ +#define ADC_OFR4_OFFSET4_0 (0x0000001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ +#define ADC_OFR4_OFFSET4_1 (0x0000002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ +#define ADC_OFR4_OFFSET4_2 (0x0000004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ +#define ADC_OFR4_OFFSET4_3 (0x0000008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ +#define ADC_OFR4_OFFSET4_4 (0x0000010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ +#define ADC_OFR4_OFFSET4_5 (0x0000020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ +#define ADC_OFR4_OFFSET4_6 (0x0000040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ +#define ADC_OFR4_OFFSET4_7 (0x0000080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ +#define ADC_OFR4_OFFSET4_8 (0x0000100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ +#define ADC_OFR4_OFFSET4_9 (0x0000200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ +#define ADC_OFR4_OFFSET4_10 (0x0000400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ +#define ADC_OFR4_OFFSET4_11 (0x0000800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ +#define ADC_OFR4_OFFSET4_12 (0x0001000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00001000 */ +#define ADC_OFR4_OFFSET4_13 (0x0002000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00002000 */ +#define ADC_OFR4_OFFSET4_14 (0x0004000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00004000 */ +#define ADC_OFR4_OFFSET4_15 (0x0008000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00008000 */ +#define ADC_OFR4_OFFSET4_16 (0x0010000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00010000 */ +#define ADC_OFR4_OFFSET4_17 (0x0020000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00020000 */ +#define ADC_OFR4_OFFSET4_18 (0x0040000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00040000 */ +#define ADC_OFR4_OFFSET4_19 (0x0080000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00080000 */ +#define ADC_OFR4_OFFSET4_20 (0x0100000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00100000 */ +#define ADC_OFR4_OFFSET4_21 (0x0200000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00200000 */ +#define ADC_OFR4_OFFSET4_22 (0x0400000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00400000 */ +#define ADC_OFR4_OFFSET4_23 (0x0800000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00800000 */ +#define ADC_OFR4_OFFSET4_24 (0x1000000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x01000000 */ +#define ADC_OFR4_OFFSET4_25 (0x2000000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x02000000 */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC Channel selection for the data offset 4 */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_SSATE_Pos (31U) +#define ADC_OFR4_SSATE_Msk (0x1UL << ADC_OFR4_SSATE_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_SSATE ADC_OFR4_SSATE_Msk /*!< ADC Signed saturation Enable */ + + +/******************** Bit definition for ADC_JDR1 register ********************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC Injected DATA */ +#define ADC_JDR1_JDATA_0 (0x00000001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR1_JDATA_1 (0x00000002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR1_JDATA_2 (0x00000004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR1_JDATA_3 (0x00000008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR1_JDATA_4 (0x00000010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR1_JDATA_5 (0x00000020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR1_JDATA_6 (0x00000040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR1_JDATA_7 (0x00000080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR1_JDATA_8 (0x00000100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR1_JDATA_9 (0x00000200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR1_JDATA_10 (0x00000400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR1_JDATA_11 (0x00000800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR1_JDATA_12 (0x00001000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR1_JDATA_13 (0x00002000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR1_JDATA_14 (0x00004000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR1_JDATA_15 (0x00008000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ +#define ADC_JDR1_JDATA_16 (0x00010000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00010000 */ +#define ADC_JDR1_JDATA_17 (0x00020000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00020000 */ +#define ADC_JDR1_JDATA_18 (0x00040000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00040000 */ +#define ADC_JDR1_JDATA_19 (0x00080000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00080000 */ +#define ADC_JDR1_JDATA_20 (0x00100000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00100000 */ +#define ADC_JDR1_JDATA_21 (0x00200000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00200000 */ +#define ADC_JDR1_JDATA_22 (0x00400000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00400000 */ +#define ADC_JDR1_JDATA_23 (0x00800000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00800000 */ +#define ADC_JDR1_JDATA_24 (0x01000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x01000000 */ +#define ADC_JDR1_JDATA_25 (0x02000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x02000000 */ +#define ADC_JDR1_JDATA_26 (0x04000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x04000000 */ +#define ADC_JDR1_JDATA_27 (0x08000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x08000000 */ +#define ADC_JDR1_JDATA_28 (0x10000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x10000000 */ +#define ADC_JDR1_JDATA_29 (0x20000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x20000000 */ +#define ADC_JDR1_JDATA_30 (0x40000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x40000000 */ +#define ADC_JDR1_JDATA_31 (0x80000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_JDR2 register ********************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC Injected DATA */ +#define ADC_JDR2_JDATA_0 (0x00000001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR2_JDATA_1 (0x00000002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR2_JDATA_2 (0x00000004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR2_JDATA_3 (0x00000008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR2_JDATA_4 (0x00000010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR2_JDATA_5 (0x00000020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR2_JDATA_6 (0x00000040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR2_JDATA_7 (0x00000080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR2_JDATA_8 (0x00000100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR2_JDATA_9 (0x00000200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR2_JDATA_10 (0x00000400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR2_JDATA_11 (0x00000800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR2_JDATA_12 (0x00001000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR2_JDATA_13 (0x00002000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR2_JDATA_14 (0x00004000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR2_JDATA_15 (0x00008000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ +#define ADC_JDR2_JDATA_16 (0x00010000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00010000 */ +#define ADC_JDR2_JDATA_17 (0x00020000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00020000 */ +#define ADC_JDR2_JDATA_18 (0x00040000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00040000 */ +#define ADC_JDR2_JDATA_19 (0x00080000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00080000 */ +#define ADC_JDR2_JDATA_20 (0x00100000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00100000 */ +#define ADC_JDR2_JDATA_21 (0x00200000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00200000 */ +#define ADC_JDR2_JDATA_22 (0x00400000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00400000 */ +#define ADC_JDR2_JDATA_23 (0x00800000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00800000 */ +#define ADC_JDR2_JDATA_24 (0x01000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x01000000 */ +#define ADC_JDR2_JDATA_25 (0x02000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x02000000 */ +#define ADC_JDR2_JDATA_26 (0x04000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x04000000 */ +#define ADC_JDR2_JDATA_27 (0x08000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x08000000 */ +#define ADC_JDR2_JDATA_28 (0x10000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x10000000 */ +#define ADC_JDR2_JDATA_29 (0x20000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x20000000 */ +#define ADC_JDR2_JDATA_30 (0x40000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x40000000 */ +#define ADC_JDR2_JDATA_31 (0x80000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_JDR3 register ********************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC Injected DATA */ +#define ADC_JDR3_JDATA_0 (0x00000001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR3_JDATA_1 (0x00000002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR3_JDATA_2 (0x00000004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR3_JDATA_3 (0x00000008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR3_JDATA_4 (0x00000010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR3_JDATA_5 (0x00000020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR3_JDATA_6 (0x00000040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR3_JDATA_7 (0x00000080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR3_JDATA_8 (0x00000100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR3_JDATA_9 (0x00000200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR3_JDATA_10 (0x00000400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR3_JDATA_11 (0x00000800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR3_JDATA_12 (0x00001000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR3_JDATA_13 (0x00002000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR3_JDATA_14 (0x00004000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR3_JDATA_15 (0x00008000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ +#define ADC_JDR3_JDATA_16 (0x00010000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00010000 */ +#define ADC_JDR3_JDATA_17 (0x00020000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00020000 */ +#define ADC_JDR3_JDATA_18 (0x00040000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00040000 */ +#define ADC_JDR3_JDATA_19 (0x00080000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00080000 */ +#define ADC_JDR3_JDATA_20 (0x00100000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00100000 */ +#define ADC_JDR3_JDATA_21 (0x00200000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00200000 */ +#define ADC_JDR3_JDATA_22 (0x00400000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00400000 */ +#define ADC_JDR3_JDATA_23 (0x00800000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00800000 */ +#define ADC_JDR3_JDATA_24 (0x01000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x01000000 */ +#define ADC_JDR3_JDATA_25 (0x02000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x02000000 */ +#define ADC_JDR3_JDATA_26 (0x04000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x04000000 */ +#define ADC_JDR3_JDATA_27 (0x08000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x08000000 */ +#define ADC_JDR3_JDATA_28 (0x10000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x10000000 */ +#define ADC_JDR3_JDATA_29 (0x20000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x20000000 */ +#define ADC_JDR3_JDATA_30 (0x40000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x40000000 */ +#define ADC_JDR3_JDATA_31 (0x80000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_JDR4 register ********************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC Injected DATA */ +#define ADC_JDR4_JDATA_0 (0x00000001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR4_JDATA_1 (0x00000002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR4_JDATA_2 (0x00000004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR4_JDATA_3 (0x00000008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR4_JDATA_4 (0x00000010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR4_JDATA_5 (0x00000020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR4_JDATA_6 (0x00000040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR4_JDATA_7 (0x00000080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR4_JDATA_8 (0x00000100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR4_JDATA_9 (0x00000200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR4_JDATA_10 (0x00000400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR4_JDATA_11 (0x00000800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR4_JDATA_12 (0x00001000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR4_JDATA_13 (0x00002000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR4_JDATA_14 (0x00004000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR4_JDATA_15 (0x00008000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ +#define ADC_JDR4_JDATA_16 (0x00010000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00010000 */ +#define ADC_JDR4_JDATA_17 (0x00020000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00020000 */ +#define ADC_JDR4_JDATA_18 (0x00040000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00040000 */ +#define ADC_JDR4_JDATA_19 (0x00080000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00080000 */ +#define ADC_JDR4_JDATA_20 (0x00100000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00100000 */ +#define ADC_JDR4_JDATA_21 (0x00200000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00200000 */ +#define ADC_JDR4_JDATA_22 (0x00400000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00400000 */ +#define ADC_JDR4_JDATA_23 (0x00800000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00800000 */ +#define ADC_JDR4_JDATA_24 (0x01000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x01000000 */ +#define ADC_JDR4_JDATA_25 (0x02000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x02000000 */ +#define ADC_JDR4_JDATA_26 (0x04000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x04000000 */ +#define ADC_JDR4_JDATA_27 (0x08000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x08000000 */ +#define ADC_JDR4_JDATA_28 (0x10000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x10000000 */ +#define ADC_JDR4_JDATA_29 (0x20000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x20000000 */ +#define ADC_JDR4_JDATA_30 (0x40000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x40000000 */ +#define ADC_JDR4_JDATA_31 (0x80000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_AWD2CR register ********************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0xFFFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x000FFFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC Analog watchdog 2 channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ +#define ADC_AWD2CR_AWD2CH_19 (0x80000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00080000 */ + +/******************** Bit definition for ADC_AWD3CR register ********************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0xFFFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x000FFFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC Analog watchdog 2 channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ +#define ADC_AWD3CR_AWD3CH_19 (0x80000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00080000 */ + +/******************** Bit definition for ADC_DIFSEL register ********************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0xFFFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x000FFFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC differential modes for channels 1 to 18 */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ +#define ADC_DIFSEL_DIFSEL_19 (0x80000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00080000 */ + +/******************** Bit definition for ADC_CALFACT register ********************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FFUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x000007FF */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factors in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x001UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x002UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x004UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x008UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x010UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x020UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x040UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ +#define ADC_CALFACT_CALFACT_S_7 (0x080UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000080 */ +#define ADC_CALFACT_CALFACT_S_8 (0x100UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000100 */ +#define ADC_CALFACT_CALFACT_S_9 (0x200UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000200 */ +#define ADC_CALFACT_CALFACT_S_10 (0x400UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000400 */ +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FFUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x07FF0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factors in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x001UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x002UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x004UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x008UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x010UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x020UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x040UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ +#define ADC_CALFACT_CALFACT_D_7 (0x080UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00800000 */ +#define ADC_CALFACT_CALFACT_D_8 (0x100UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x01000000 */ +#define ADC_CALFACT_CALFACT_D_9 (0x200UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x02000000 */ +#define ADC_CALFACT_CALFACT_D_10 (0x400UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_CALFACT2 register ********************/ +#define ADC_CALFACT2_LINCALFACT_Pos (0U) +#define ADC_CALFACT2_LINCALFACT_Msk (0x3FFFFFFFUL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x3FFFFFFF */ +#define ADC_CALFACT2_LINCALFACT ADC_CALFACT2_LINCALFACT_Msk /*!< ADC Linearity calibration factors */ +#define ADC_CALFACT2_LINCALFACT_0 (0x00000001UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT2_LINCALFACT_1 (0x00000002UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT2_LINCALFACT_2 (0x00000004UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT2_LINCALFACT_3 (0x00000008UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT2_LINCALFACT_4 (0x00000010UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT2_LINCALFACT_5 (0x00000020UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT2_LINCALFACT_6 (0x00000040UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000040 */ +#define ADC_CALFACT2_LINCALFACT_7 (0x00000080UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000080 */ +#define ADC_CALFACT2_LINCALFACT_8 (0x00000100UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000100 */ +#define ADC_CALFACT2_LINCALFACT_9 (0x00000200UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000200 */ +#define ADC_CALFACT2_LINCALFACT_10 (0x00000400UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000400 */ +#define ADC_CALFACT2_LINCALFACT_11 (0x00000800UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000800 */ +#define ADC_CALFACT2_LINCALFACT_12 (0x00001000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00001000 */ +#define ADC_CALFACT2_LINCALFACT_13 (0x00002000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00002000 */ +#define ADC_CALFACT2_LINCALFACT_14 (0x00004000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00004000 */ +#define ADC_CALFACT2_LINCALFACT_15 (0x00008000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00008000 */ +#define ADC_CALFACT2_LINCALFACT_16 (0x00010000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT2_LINCALFACT_17 (0x00020000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT2_LINCALFACT_18 (0x00040000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT2_LINCALFACT_19 (0x00080000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT2_LINCALFACT_20 (0x00100000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT2_LINCALFACT_21 (0x00200000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT2_LINCALFACT_22 (0x00400000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00400000 */ +#define ADC_CALFACT2_LINCALFACT_23 (0x00800000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00800000 */ +#define ADC_CALFACT2_LINCALFACT_24 (0x01000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x01000000 */ +#define ADC_CALFACT2_LINCALFACT_25 (0x02000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x02000000 */ +#define ADC_CALFACT2_LINCALFACT_26 (0x04000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x04000000 */ +#define ADC_CALFACT2_LINCALFACT_27 (0x08000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x08000000 */ +#define ADC_CALFACT2_LINCALFACT_28 (0x10000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x10000000 */ +#define ADC_CALFACT2_LINCALFACT_29 (0x20000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x20000000 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CSR register ********************/ +#define ADC_CSR_ADRDY_MST_Pos (0U) +#define ADC_CSR_ADRDY_MST_Msk (0x1UL << ADC_CSR_ADRDY_MST_Pos) /*!< 0x00000001 */ +#define ADC_CSR_ADRDY_MST ADC_CSR_ADRDY_MST_Msk /*!< Master ADC ready */ +#define ADC_CSR_EOSMP_MST_Pos (1U) +#define ADC_CSR_EOSMP_MST_Msk (0x1UL << ADC_CSR_EOSMP_MST_Pos) /*!< 0x00000002 */ +#define ADC_CSR_EOSMP_MST ADC_CSR_EOSMP_MST_Msk /*!< End of sampling phase flag of the master ADC */ +#define ADC_CSR_EOC_MST_Pos (2U) +#define ADC_CSR_EOC_MST_Msk (0x1UL << ADC_CSR_EOC_MST_Pos) /*!< 0x00000004 */ +#define ADC_CSR_EOC_MST ADC_CSR_EOC_MST_Msk /*!< End of regular conversion of the master ADC */ +#define ADC_CSR_EOS_MST_Pos (3U) +#define ADC_CSR_EOS_MST_Msk (0x1UL << ADC_CSR_EOS_MST_Pos) /*!< 0x00000008 */ +#define ADC_CSR_EOS_MST ADC_CSR_EOS_MST_Msk /*!< End of regular sequence flag of the master ADC */ +#define ADC_CSR_OVR_MST_Pos (4U) +#define ADC_CSR_OVR_MST_Msk (0x1UL << ADC_CSR_OVR_MST_Pos) /*!< 0x00000010 */ +#define ADC_CSR_OVR_MST ADC_CSR_OVR_MST_Msk /*!< Overrun flag of the master ADC */ +#define ADC_CSR_JEOC_MST_Pos (5U) +#define ADC_CSR_JEOC_MST_Msk (0x1UL << ADC_CSR_JEOC_MST_Pos) /*!< 0x00000020 */ +#define ADC_CSR_JEOC_MST ADC_CSR_JEOC_MST_Msk /*!< End of injected conversion of the master ADC */ +#define ADC_CSR_JEOS_MST_Pos (6U) +#define ADC_CSR_JEOS_MST_Msk (0x1UL << ADC_CSR_JEOS_MST_Pos) /*!< 0x00000040 */ +#define ADC_CSR_JEOS_MST ADC_CSR_JEOS_MST_Msk /*!< End of injected sequence flag of the master ADC */ +#define ADC_CSR_AWD1_MST_Pos (7U) +#define ADC_CSR_AWD1_MST_Msk (0x1UL << ADC_CSR_AWD1_MST_Pos) /*!< 0x00000080 */ +#define ADC_CSR_AWD1_MST ADC_CSR_AWD1_MST_Msk /*!< Analog watchdog 1 flag of the master ADC */ +#define ADC_CSR_AWD2_MST_Pos (8U) +#define ADC_CSR_AWD2_MST_Msk (0x1UL << ADC_CSR_AWD2_MST_Pos) /*!< 0x00000100 */ +#define ADC_CSR_AWD2_MST ADC_CSR_AWD2_MST_Msk /*!< Analog watchdog 2 flag of the master ADC */ +#define ADC_CSR_AWD3_MST_Pos (9U) +#define ADC_CSR_AWD3_MST_Msk (0x1UL << ADC_CSR_AWD3_MST_Pos) /*!< 0x00000200 */ +#define ADC_CSR_AWD3_MST ADC_CSR_AWD3_MST_Msk /*!< Analog watchdog 3 flag of the master ADC */ +#define ADC_CSR_JQOVF_MST_Pos (10U) +#define ADC_CSR_JQOVF_MST_Msk (0x1UL << ADC_CSR_JQOVF_MST_Pos) /*!< 0x00000400 */ +#define ADC_CSR_JQOVF_MST ADC_CSR_JQOVF_MST_Msk /*!< Injected context queue overflow flag of the master ADC */ +#define ADC_CSR_ADRDY_SLV_Pos (16U) +#define ADC_CSR_ADRDY_SLV_Msk (0x1UL << ADC_CSR_ADRDY_SLV_Pos) /*!< 0x00010000 */ +#define ADC_CSR_ADRDY_SLV ADC_CSR_ADRDY_SLV_Msk /*!< Slave ADC ready */ +#define ADC_CSR_EOSMP_SLV_Pos (17U) +#define ADC_CSR_EOSMP_SLV_Msk (0x1UL << ADC_CSR_EOSMP_SLV_Pos) /*!< 0x00020000 */ +#define ADC_CSR_EOSMP_SLV ADC_CSR_EOSMP_SLV_Msk /*!< End of sampling phase flag of the slave ADC */ +#define ADC_CSR_EOC_SLV_Pos (18U) +#define ADC_CSR_EOC_SLV_Msk (0x1UL << ADC_CSR_EOC_SLV_Pos) /*!< 0x00040000 */ +#define ADC_CSR_EOC_SLV ADC_CSR_EOC_SLV_Msk /*!< End of regular conversion of the slave ADC */ +#define ADC_CSR_EOS_SLV_Pos (19U) +#define ADC_CSR_EOS_SLV_Msk (0x1UL << ADC_CSR_EOS_SLV_Pos) /*!< 0x00080000 */ +#define ADC_CSR_EOS_SLV ADC_CSR_EOS_SLV_Msk /*!< End of regular sequence flag of the slave ADC */ +#define ADC_CSR_OVR_SLV_Pos (20U) +#define ADC_CSR_OVR_SLV_Msk (0x1UL << ADC_CSR_OVR_SLV_Pos) /*!< 0x00100000 */ +#define ADC_CSR_OVR_SLV ADC_CSR_OVR_SLV_Msk /*!< Overrun flag of the slave ADC */ +#define ADC_CSR_JEOC_SLV_Pos (21U) +#define ADC_CSR_JEOC_SLV_Msk (0x1UL << ADC_CSR_JEOC_SLV_Pos) /*!< 0x00200000 */ +#define ADC_CSR_JEOC_SLV ADC_CSR_JEOC_SLV_Msk /*!< End of injected conversion of the slave ADC */ +#define ADC_CSR_JEOS_SLV_Pos (22U) +#define ADC_CSR_JEOS_SLV_Msk (0x1UL << ADC_CSR_JEOS_SLV_Pos) /*!< 0x00400000 */ +#define ADC_CSR_JEOS_SLV ADC_CSR_JEOS_SLV_Msk /*!< End of injected sequence flag of the slave ADC */ +#define ADC_CSR_AWD1_SLV_Pos (23U) +#define ADC_CSR_AWD1_SLV_Msk (0x1UL << ADC_CSR_AWD1_SLV_Pos) /*!< 0x00800000 */ +#define ADC_CSR_AWD1_SLV ADC_CSR_AWD1_SLV_Msk /*!< Analog watchdog 1 flag of the slave ADC */ +#define ADC_CSR_AWD2_SLV_Pos (24U) +#define ADC_CSR_AWD2_SLV_Msk (0x1UL << ADC_CSR_AWD2_SLV_Pos) /*!< 0x01000000 */ +#define ADC_CSR_AWD2_SLV ADC_CSR_AWD2_SLV_Msk /*!< Analog watchdog 2 flag of the slave ADC */ +#define ADC_CSR_AWD3_SLV_Pos (25U) +#define ADC_CSR_AWD3_SLV_Msk (0x1UL << ADC_CSR_AWD3_SLV_Pos) /*!< 0x02000000 */ +#define ADC_CSR_AWD3_SLV ADC_CSR_AWD3_SLV_Msk /*!< Analog watchdog 3 flag of the slave ADC */ +#define ADC_CSR_JQOVF_SLV_Pos (26U) +#define ADC_CSR_JQOVF_SLV_Msk (0x1UL << ADC_CSR_JQOVF_SLV_Pos) /*!< 0x04000000 */ +#define ADC_CSR_JQOVF_SLV ADC_CSR_JQOVF_SLV_Msk /*!< Injected context queue overflow flag of the slave ADC */ + +/******************** Bit definition for ADC_CCR register ********************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< Dual ADC mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< Delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + + +#define ADC_CCR_DAMDF_Pos (14U) +#define ADC_CCR_DAMDF_Msk (0x3UL << ADC_CCR_DAMDF_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_DAMDF ADC_CCR_DAMDF_Msk /*!< Dual ADC mode Data format */ +#define ADC_CCR_DAMDF_0 (0x1UL << ADC_CCR_DAMDF_Pos) /*!< 0x00004000 */ +#define ADC_CCR_DAMDF_1 (0x2UL << ADC_CCR_DAMDF_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC clock mode */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC prescaler */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< VREFINT enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< Temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< VBAT enable */ + +/******************** Bit definition for ADC_CDR register *******************/ +#define ADC_CDR_RDATA_MST_Pos (0U) +#define ADC_CDR_RDATA_MST_Msk (0xFFFFUL << ADC_CDR_RDATA_MST_Pos) /*!< 0x0000FFFF */ +#define ADC_CDR_RDATA_MST ADC_CDR_RDATA_MST_Msk /*!< ADC multimode master group regular conversion data */ + +#define ADC_CDR_RDATA_SLV_Pos (16U) +#define ADC_CDR_RDATA_SLV_Msk (0xFFFFUL << ADC_CDR_RDATA_SLV_Pos) /*!< 0xFFFF0000 */ +#define ADC_CDR_RDATA_SLV ADC_CDR_RDATA_SLV_Msk /*!< ADC multimode slave group regular conversion data */ + +/******************** Bit definition for ADC_CDR2 register ******************/ +#define ADC_CDR2_RDATA_ALT_Pos (0U) +#define ADC_CDR2_RDATA_ALT_Msk (0xFFFFFFFFUL << ADC_CDR2_RDATA_ALT_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CDR2_RDATA_ALT ADC_CDR2_RDATA_ALT_Msk /*!< Regular data of the master/slave alternated ADCs */ + +/******************************************************************************/ +/* */ +/* ART accelerator */ +/* */ +/******************************************************************************/ +/******************* Bit definition for ART_CTR register ********************/ +#define ART_CTR_EN_Pos (0U) +#define ART_CTR_EN_Msk (0x1UL << ART_CTR_EN_Pos) /*!< 0x00000001 */ +#define ART_CTR_EN ART_CTR_EN_Msk /*!< Cache enable*/ + +#define ART_CTR_PCACHEADDR_Pos (8U) +#define ART_CTR_PCACHEADDR_Msk (0xFFFUL << ART_CTR_PCACHEADDR_Pos) /*!< 0x000FFF00 */ +#define ART_CTR_PCACHEADDR ART_CTR_PCACHEADDR_Msk /*!< Cacheable page index */ + +/******************************************************************************/ +/* */ +/* VREFBUF */ +/* */ +/******************************************************************************/ +/******************* Bit definition for VREFBUF_CSR register ****************/ +#define VREFBUF_CSR_ENVR_Pos (0U) +#define VREFBUF_CSR_ENVR_Msk (0x1UL << VREFBUF_CSR_ENVR_Pos) /*!< 0x00000001 */ +#define VREFBUF_CSR_ENVR VREFBUF_CSR_ENVR_Msk /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!> 1) /* 1 MB */ +#define FLASH_SECTOR_SIZE 0x00020000UL /* 128 KB */ +#define FLASH_LATENCY_DEFAULT FLASH_ACR_LATENCY_7WS /* FLASH Seven Latency cycles */ +#define FLASH_NB_32BITWORD_IN_FLASHWORD 8U /* 256 bits */ +#define DUAL_BANK /* Dual-bank Flash */ + +/******************* Bits definition for FLASH_ACR register **********************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0xFUL << FLASH_ACR_LATENCY_Pos) /*!< 0x0000000F: bit4 is kept only for legacy purpose */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< Read Latency */ +#define FLASH_ACR_LATENCY_0WS (0x00000000UL) +#define FLASH_ACR_LATENCY_1WS (0x00000001UL) +#define FLASH_ACR_LATENCY_2WS (0x00000002UL) +#define FLASH_ACR_LATENCY_3WS (0x00000003UL) +#define FLASH_ACR_LATENCY_4WS (0x00000004UL) +#define FLASH_ACR_LATENCY_5WS (0x00000005UL) +#define FLASH_ACR_LATENCY_6WS (0x00000006UL) +#define FLASH_ACR_LATENCY_7WS (0x00000007UL) + +#define FLASH_ACR_WRHIGHFREQ_Pos (4U) +#define FLASH_ACR_WRHIGHFREQ_Msk (0x3UL << FLASH_ACR_WRHIGHFREQ_Pos) /*!< 0x00000030 */ +#define FLASH_ACR_WRHIGHFREQ FLASH_ACR_WRHIGHFREQ_Msk /*!< Flash signal delay */ +#define FLASH_ACR_WRHIGHFREQ_0 (0x1UL << FLASH_ACR_WRHIGHFREQ_Pos) /*!< 0x00000010 */ +#define FLASH_ACR_WRHIGHFREQ_1 (0x2UL << FLASH_ACR_WRHIGHFREQ_Pos) /*!< 0x00000020 */ + +/* Legacy FLASH Latency defines */ +#define FLASH_ACR_LATENCY_8WS (0x00000008UL) +#define FLASH_ACR_LATENCY_9WS (0x00000009UL) +#define FLASH_ACR_LATENCY_10WS (0x0000000AUL) +#define FLASH_ACR_LATENCY_11WS (0x0000000BUL) +#define FLASH_ACR_LATENCY_12WS (0x0000000CUL) +#define FLASH_ACR_LATENCY_13WS (0x0000000DUL) +#define FLASH_ACR_LATENCY_14WS (0x0000000EUL) +#define FLASH_ACR_LATENCY_15WS (0x0000000FUL) +/******************* Bits definition for FLASH_CR register ***********************/ +#define FLASH_CR_LOCK_Pos (0U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x00000001 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Configuration lock bit */ +#define FLASH_CR_PG_Pos (1U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Internal buffer control bit */ +#define FLASH_CR_SER_Pos (2U) +#define FLASH_CR_SER_Msk (0x1UL << FLASH_CR_SER_Pos) /*!< 0x00000004 */ +#define FLASH_CR_SER FLASH_CR_SER_Msk /*!< Sector erase request */ +#define FLASH_CR_BER_Pos (3U) +#define FLASH_CR_BER_Msk (0x1UL << FLASH_CR_BER_Pos) /*!< 0x00000008 */ +#define FLASH_CR_BER FLASH_CR_BER_Msk /*!< Bank erase request */ +#define FLASH_CR_PSIZE_Pos (4U) +#define FLASH_CR_PSIZE_Msk (0x3UL << FLASH_CR_PSIZE_Pos) /*!< 0x00000030 */ +#define FLASH_CR_PSIZE FLASH_CR_PSIZE_Msk /*!< Program size */ +#define FLASH_CR_PSIZE_0 (0x1UL << FLASH_CR_PSIZE_Pos) /*!< 0x00000010 */ +#define FLASH_CR_PSIZE_1 (0x2UL << FLASH_CR_PSIZE_Pos) /*!< 0x00000020 */ +#define FLASH_CR_FW_Pos (6U) +#define FLASH_CR_FW_Msk (0x1UL << FLASH_CR_FW_Pos) /*!< 0x00000040 */ +#define FLASH_CR_FW FLASH_CR_FW_Msk /*!< Write forcing control bit */ +#define FLASH_CR_START_Pos (7U) +#define FLASH_CR_START_Msk (0x1UL << FLASH_CR_START_Pos) /*!< 0x00000080 */ +#define FLASH_CR_START FLASH_CR_START_Msk /*!< Erase start control bit */ +#define FLASH_CR_SNB_Pos (8U) +#define FLASH_CR_SNB_Msk (0x7UL << FLASH_CR_SNB_Pos) /*!< 0x00000700 */ +#define FLASH_CR_SNB FLASH_CR_SNB_Msk /*!< Sector erase selection number */ +#define FLASH_CR_SNB_0 (0x1UL << FLASH_CR_SNB_Pos) /*!< 0x00000100 */ +#define FLASH_CR_SNB_1 (0x2UL << FLASH_CR_SNB_Pos) /*!< 0x00000200 */ +#define FLASH_CR_SNB_2 (0x4UL << FLASH_CR_SNB_Pos) /*!< 0x00000400 */ +#define FLASH_CR_CRC_EN_Pos (15U) +#define FLASH_CR_CRC_EN_Msk (0x1UL << FLASH_CR_CRC_EN_Pos) /*!< 0x00008000 */ +#define FLASH_CR_CRC_EN FLASH_CR_CRC_EN_Msk /*!< CRC control bit */ +#define FLASH_CR_EOPIE_Pos (16U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x00010000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End-of-program interrupt control bit */ +#define FLASH_CR_WRPERRIE_Pos (17U) +#define FLASH_CR_WRPERRIE_Msk (0x1UL << FLASH_CR_WRPERRIE_Pos) /*!< 0x00020000 */ +#define FLASH_CR_WRPERRIE FLASH_CR_WRPERRIE_Msk /*!< Write protection error interrupt enable bit */ +#define FLASH_CR_PGSERRIE_Pos (18U) +#define FLASH_CR_PGSERRIE_Msk (0x1UL << FLASH_CR_PGSERRIE_Pos) /*!< 0x00040000 */ +#define FLASH_CR_PGSERRIE FLASH_CR_PGSERRIE_Msk /*!< Programming sequence error interrupt enable bit */ +#define FLASH_CR_STRBERRIE_Pos (19U) +#define FLASH_CR_STRBERRIE_Msk (0x1UL << FLASH_CR_STRBERRIE_Pos) /*!< 0x00080000 */ +#define FLASH_CR_STRBERRIE FLASH_CR_STRBERRIE_Msk /*!< Strobe error interrupt enable bit */ +#define FLASH_CR_INCERRIE_Pos (21U) +#define FLASH_CR_INCERRIE_Msk (0x1UL << FLASH_CR_INCERRIE_Pos) /*!< 0x00200000 */ +#define FLASH_CR_INCERRIE FLASH_CR_INCERRIE_Msk /*!< Inconsistency error interrupt enable bit */ +#define FLASH_CR_OPERRIE_Pos (22U) +#define FLASH_CR_OPERRIE_Msk (0x1UL << FLASH_CR_OPERRIE_Pos) /*!< 0x00400000 */ +#define FLASH_CR_OPERRIE FLASH_CR_OPERRIE_Msk /*!< Write/erase error interrupt enable bit */ +#define FLASH_CR_RDPERRIE_Pos (23U) +#define FLASH_CR_RDPERRIE_Msk (0x1UL << FLASH_CR_RDPERRIE_Pos) /*!< 0x00800000 */ +#define FLASH_CR_RDPERRIE FLASH_CR_RDPERRIE_Msk /*!< Read protection error interrupt enable bit */ +#define FLASH_CR_RDSERRIE_Pos (24U) +#define FLASH_CR_RDSERRIE_Msk (0x1UL << FLASH_CR_RDSERRIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_RDSERRIE FLASH_CR_RDSERRIE_Msk /*!< Secure error interrupt enable bit */ +#define FLASH_CR_SNECCERRIE_Pos (25U) +#define FLASH_CR_SNECCERRIE_Msk (0x1UL << FLASH_CR_SNECCERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_SNECCERRIE FLASH_CR_SNECCERRIE_Msk /*!< ECC single correction error interrupt enable bit */ +#define FLASH_CR_DBECCERRIE_Pos (26U) +#define FLASH_CR_DBECCERRIE_Msk (0x1UL << FLASH_CR_DBECCERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_DBECCERRIE FLASH_CR_DBECCERRIE_Msk /*!< ECC double detection error interrupt enable bit */ +#define FLASH_CR_CRCENDIE_Pos (27U) +#define FLASH_CR_CRCENDIE_Msk (0x1UL << FLASH_CR_CRCENDIE_Pos) /*!< 0x08000000 */ +#define FLASH_CR_CRCENDIE FLASH_CR_CRCENDIE_Msk /*!< CRC end of calculation interrupt enable bit */ +#define FLASH_CR_CRCRDERRIE_Pos (28U) +#define FLASH_CR_CRCRDERRIE_Msk (0x1UL << FLASH_CR_CRCRDERRIE_Pos) /*!< 0x10000000 */ +#define FLASH_CR_CRCRDERRIE FLASH_CR_CRCRDERRIE_Msk /*!< CRC read error interrupt enable bit */ + +/******************* Bits definition for FLASH_SR register ***********************/ +#define FLASH_SR_BSY_Pos (0U) +#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00000001 */ +#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Busy flag */ +#define FLASH_SR_WBNE_Pos (1U) +#define FLASH_SR_WBNE_Msk (0x1UL << FLASH_SR_WBNE_Pos) /*!< 0x00000002 */ +#define FLASH_SR_WBNE FLASH_SR_WBNE_Msk /*!< Write buffer not empty flag */ +#define FLASH_SR_QW_Pos (2U) +#define FLASH_SR_QW_Msk (0x1UL << FLASH_SR_QW_Pos) /*!< 0x00000004 */ +#define FLASH_SR_QW FLASH_SR_QW_Msk /*!< Wait queue flag */ +#define FLASH_SR_CRC_BUSY_Pos (3U) +#define FLASH_SR_CRC_BUSY_Msk (0x1UL << FLASH_SR_CRC_BUSY_Pos) /*!< 0x00000008 */ +#define FLASH_SR_CRC_BUSY FLASH_SR_CRC_BUSY_Msk /*!< CRC busy flag */ +#define FLASH_SR_EOP_Pos (16U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00010000 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End-of-program flag */ +#define FLASH_SR_WRPERR_Pos (17U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00020000 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error flag */ +#define FLASH_SR_PGSERR_Pos (18U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00040000 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk /*!< Programming sequence error flag */ +#define FLASH_SR_STRBERR_Pos (19U) +#define FLASH_SR_STRBERR_Msk (0x1UL << FLASH_SR_STRBERR_Pos) /*!< 0x00080000 */ +#define FLASH_SR_STRBERR FLASH_SR_STRBERR_Msk /*!< Strobe error flag */ +#define FLASH_SR_INCERR_Pos (21U) +#define FLASH_SR_INCERR_Msk (0x1UL << FLASH_SR_INCERR_Pos) /*!< 0x00200000 */ +#define FLASH_SR_INCERR FLASH_SR_INCERR_Msk /*!< Inconsistency error flag */ +#define FLASH_SR_OPERR_Pos (22U) +#define FLASH_SR_OPERR_Msk (0x1UL << FLASH_SR_OPERR_Pos) /*!< 0x00400000 */ +#define FLASH_SR_OPERR FLASH_SR_OPERR_Msk /*!< Write/erase error flag */ +#define FLASH_SR_RDPERR_Pos (23U) +#define FLASH_SR_RDPERR_Msk (0x1UL << FLASH_SR_RDPERR_Pos) /*!< 0x00800000 */ +#define FLASH_SR_RDPERR FLASH_SR_RDPERR_Msk /*!< Read protection error flag */ +#define FLASH_SR_RDSERR_Pos (24U) +#define FLASH_SR_RDSERR_Msk (0x1UL << FLASH_SR_RDSERR_Pos) /*!< 0x01000000 */ +#define FLASH_SR_RDSERR FLASH_SR_RDSERR_Msk /*!< Secure error flag */ +#define FLASH_SR_SNECCERR_Pos (25U) +#define FLASH_SR_SNECCERR_Msk (0x1UL << FLASH_SR_SNECCERR_Pos) /*!< 0x02000000 */ +#define FLASH_SR_SNECCERR FLASH_SR_SNECCERR_Msk /*!< Single correction error flag */ +#define FLASH_SR_DBECCERR_Pos (26U) +#define FLASH_SR_DBECCERR_Msk (0x1UL << FLASH_SR_DBECCERR_Pos) /*!< 0x04000000 */ +#define FLASH_SR_DBECCERR FLASH_SR_DBECCERR_Msk /*!< ECC double detection error flag */ +#define FLASH_SR_CRCEND_Pos (27U) +#define FLASH_SR_CRCEND_Msk (0x1UL << FLASH_SR_CRCEND_Pos) /*!< 0x08000000 */ +#define FLASH_SR_CRCEND FLASH_SR_CRCEND_Msk /*!< CRC end of calculation flag */ +#define FLASH_SR_CRCRDERR_Pos (28U) +#define FLASH_SR_CRCRDERR_Msk (0x1UL << FLASH_SR_CRCRDERR_Pos) /*!< 0x10000000 */ +#define FLASH_SR_CRCRDERR FLASH_SR_CRCRDERR_Msk /*!< CRC read error flag */ + +/******************* Bits definition for FLASH_CCR register *******************/ +#define FLASH_CCR_CLR_EOP_Pos (16U) +#define FLASH_CCR_CLR_EOP_Msk (0x1UL << FLASH_CCR_CLR_EOP_Pos) /*!< 0x00010000 */ +#define FLASH_CCR_CLR_EOP FLASH_CCR_CLR_EOP_Msk /*!< EOP flag clear bit */ +#define FLASH_CCR_CLR_WRPERR_Pos (17U) +#define FLASH_CCR_CLR_WRPERR_Msk (0x1UL << FLASH_CCR_CLR_WRPERR_Pos) /*!< 0x00020000 */ +#define FLASH_CCR_CLR_WRPERR FLASH_CCR_CLR_WRPERR_Msk /*!< WRPERR flag clear bit */ +#define FLASH_CCR_CLR_PGSERR_Pos (18U) +#define FLASH_CCR_CLR_PGSERR_Msk (0x1UL << FLASH_CCR_CLR_PGSERR_Pos) /*!< 0x00040000 */ +#define FLASH_CCR_CLR_PGSERR FLASH_CCR_CLR_PGSERR_Msk /*!< PGSERR flag clear bit */ +#define FLASH_CCR_CLR_STRBERR_Pos (19U) +#define FLASH_CCR_CLR_STRBERR_Msk (0x1UL << FLASH_CCR_CLR_STRBERR_Pos) /*!< 0x00080000 */ +#define FLASH_CCR_CLR_STRBERR FLASH_CCR_CLR_STRBERR_Msk /*!< STRBERR flag clear bit */ +#define FLASH_CCR_CLR_INCERR_Pos (21U) +#define FLASH_CCR_CLR_INCERR_Msk (0x1UL << FLASH_CCR_CLR_INCERR_Pos) /*!< 0x00200000 */ +#define FLASH_CCR_CLR_INCERR FLASH_CCR_CLR_INCERR_Msk /*!< INCERR flag clear bit */ +#define FLASH_CCR_CLR_OPERR_Pos (22U) +#define FLASH_CCR_CLR_OPERR_Msk (0x1UL << FLASH_CCR_CLR_OPERR_Pos) /*!< 0x00400000 */ +#define FLASH_CCR_CLR_OPERR FLASH_CCR_CLR_OPERR_Msk /*!< OPERR flag clear bit */ +#define FLASH_CCR_CLR_RDPERR_Pos (23U) +#define FLASH_CCR_CLR_RDPERR_Msk (0x1UL << FLASH_CCR_CLR_RDPERR_Pos) /*!< 0x00800000 */ +#define FLASH_CCR_CLR_RDPERR FLASH_CCR_CLR_RDPERR_Msk /*!< RDPERR flag clear bit */ +#define FLASH_CCR_CLR_RDSERR_Pos (24U) +#define FLASH_CCR_CLR_RDSERR_Msk (0x1UL << FLASH_CCR_CLR_RDSERR_Pos) /*!< 0x01000000 */ +#define FLASH_CCR_CLR_RDSERR FLASH_CCR_CLR_RDSERR_Msk /*!< RDSERR flag clear bit */ +#define FLASH_CCR_CLR_SNECCERR_Pos (25U) +#define FLASH_CCR_CLR_SNECCERR_Msk (0x1UL << FLASH_CCR_CLR_SNECCERR_Pos) /*!< 0x02000000 */ +#define FLASH_CCR_CLR_SNECCERR FLASH_CCR_CLR_SNECCERR_Msk /*!< SNECCERR flag clear bit */ +#define FLASH_CCR_CLR_DBECCERR_Pos (26U) +#define FLASH_CCR_CLR_DBECCERR_Msk (0x1UL << FLASH_CCR_CLR_DBECCERR_Pos) /*!< 0x04000000 */ +#define FLASH_CCR_CLR_DBECCERR FLASH_CCR_CLR_DBECCERR_Msk /*!< DBECCERR flag clear bit */ +#define FLASH_CCR_CLR_CRCEND_Pos (27U) +#define FLASH_CCR_CLR_CRCEND_Msk (0x1UL << FLASH_CCR_CLR_CRCEND_Pos) /*!< 0x08000000 */ +#define FLASH_CCR_CLR_CRCEND FLASH_CCR_CLR_CRCEND_Msk /*!< CRCEND flag clear bit */ +#define FLASH_CCR_CLR_CRCRDERR_Pos (28U) +#define FLASH_CCR_CLR_CRCRDERR_Msk (0x1UL << FLASH_CCR_CLR_CRCRDERR_Pos) /*!< 0x10000000 */ +#define FLASH_CCR_CLR_CRCRDERR FLASH_CCR_CLR_CRCRDERR_Msk /*!< CRCRDERR flag clear bit */ + +/******************* Bits definition for FLASH_OPTCR register *******************/ +#define FLASH_OPTCR_OPTLOCK_Pos (0U) +#define FLASH_OPTCR_OPTLOCK_Msk (0x1UL << FLASH_OPTCR_OPTLOCK_Pos) /*!< 0x00000001 */ +#define FLASH_OPTCR_OPTLOCK FLASH_OPTCR_OPTLOCK_Msk /*!< FLASH_OPTCR lock option configuration bit */ +#define FLASH_OPTCR_OPTSTART_Pos (1U) +#define FLASH_OPTCR_OPTSTART_Msk (0x1UL << FLASH_OPTCR_OPTSTART_Pos) /*!< 0x00000002 */ +#define FLASH_OPTCR_OPTSTART FLASH_OPTCR_OPTSTART_Msk /*!< Option byte start change option configuration bit */ +#define FLASH_OPTCR_MER_Pos (4U) +#define FLASH_OPTCR_MER_Msk (0x1UL << FLASH_OPTCR_MER_Pos) /*!< 0x00000010 */ +#define FLASH_OPTCR_MER FLASH_OPTCR_MER_Msk /*!< Mass erase request */ +#define FLASH_OPTCR_OPTCHANGEERRIE_Pos (30U) +#define FLASH_OPTCR_OPTCHANGEERRIE_Msk (0x1UL << FLASH_OPTCR_OPTCHANGEERRIE_Pos) /*!< 0x40000000 */ +#define FLASH_OPTCR_OPTCHANGEERRIE FLASH_OPTCR_OPTCHANGEERRIE_Msk /*!< Option byte change error interrupt enable bit */ +#define FLASH_OPTCR_SWAP_BANK_Pos (31U) +#define FLASH_OPTCR_SWAP_BANK_Msk (0x1UL << FLASH_OPTCR_SWAP_BANK_Pos) /*!< 0x80000000 */ +#define FLASH_OPTCR_SWAP_BANK FLASH_OPTCR_SWAP_BANK_Msk /*!< Bank swapping option configuration bit */ + +/******************* Bits definition for FLASH_OPTSR register ***************/ +#define FLASH_OPTSR_OPT_BUSY_Pos (0U) +#define FLASH_OPTSR_OPT_BUSY_Msk (0x1UL << FLASH_OPTSR_OPT_BUSY_Pos) /*!< 0x00000001 */ +#define FLASH_OPTSR_OPT_BUSY FLASH_OPTSR_OPT_BUSY_Msk /*!< Option byte change ongoing flag */ +#define FLASH_OPTSR_BOR_LEV_Pos (2U) +#define FLASH_OPTSR_BOR_LEV_Msk (0x3UL << FLASH_OPTSR_BOR_LEV_Pos) /*!< 0x0000000C */ +#define FLASH_OPTSR_BOR_LEV FLASH_OPTSR_BOR_LEV_Msk /*!< Brownout level option status bit */ +#define FLASH_OPTSR_BOR_LEV_0 (0x1UL << FLASH_OPTSR_BOR_LEV_Pos) /*!< 0x00000004 */ +#define FLASH_OPTSR_BOR_LEV_1 (0x2UL << FLASH_OPTSR_BOR_LEV_Pos) /*!< 0x00000008 */ +#define FLASH_OPTSR_IWDG1_SW_Pos (4U) +#define FLASH_OPTSR_IWDG1_SW_Msk (0x1UL << FLASH_OPTSR_IWDG1_SW_Pos) /*!< 0x00000010 */ +#define FLASH_OPTSR_IWDG1_SW FLASH_OPTSR_IWDG1_SW_Msk /*!< IWDG1 control mode option status bit */ +#define FLASH_OPTSR_IWDG2_SW_Pos (5U) +#define FLASH_OPTSR_IWDG2_SW_Msk (0x1UL << FLASH_OPTSR_IWDG2_SW_Pos) /*!< 0x00000020 */ +#define FLASH_OPTSR_IWDG2_SW FLASH_OPTSR_IWDG2_SW_Msk /*!< IWDG2 control mode option status bit */ +#define FLASH_OPTSR_NRST_STOP_D1_Pos (6U) +#define FLASH_OPTSR_NRST_STOP_D1_Msk (0x1UL << FLASH_OPTSR_NRST_STOP_D1_Pos) /*!< 0x00000040 */ +#define FLASH_OPTSR_NRST_STOP_D1 FLASH_OPTSR_NRST_STOP_D1_Msk /*!< D1 domain DStop entry reset option status bit */ +#define FLASH_OPTSR_NRST_STBY_D1_Pos (7U) +#define FLASH_OPTSR_NRST_STBY_D1_Msk (0x1UL << FLASH_OPTSR_NRST_STBY_D1_Pos) /*!< 0x00000080 */ +#define FLASH_OPTSR_NRST_STBY_D1 FLASH_OPTSR_NRST_STBY_D1_Msk /*!< D1 domain DStandby entry reset option status bit */ +#define FLASH_OPTSR_RDP_Pos (8U) +#define FLASH_OPTSR_RDP_Msk (0xFFUL << FLASH_OPTSR_RDP_Pos) /*!< 0x0000FF00 */ +#define FLASH_OPTSR_RDP FLASH_OPTSR_RDP_Msk /*!< Readout protection level option status byte */ +#define FLASH_OPTSR_FZ_IWDG_STOP_Pos (17U) +#define FLASH_OPTSR_FZ_IWDG_STOP_Msk (0x1UL << FLASH_OPTSR_FZ_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTSR_FZ_IWDG_STOP FLASH_OPTSR_FZ_IWDG_STOP_Msk /*!< IWDG Stop mode freeze option status bit */ +#define FLASH_OPTSR_FZ_IWDG_SDBY_Pos (18U) +#define FLASH_OPTSR_FZ_IWDG_SDBY_Msk (0x1UL << FLASH_OPTSR_FZ_IWDG_SDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTSR_FZ_IWDG_SDBY FLASH_OPTSR_FZ_IWDG_SDBY_Msk /*!< IWDG Standby mode freeze option status bit */ +#define FLASH_OPTSR_ST_RAM_SIZE_Pos (19U) +#define FLASH_OPTSR_ST_RAM_SIZE_Msk (0x3UL << FLASH_OPTSR_ST_RAM_SIZE_Pos) /*!< 0x00180000 */ +#define FLASH_OPTSR_ST_RAM_SIZE FLASH_OPTSR_ST_RAM_SIZE_Msk /*!< ST RAM size option status */ +#define FLASH_OPTSR_ST_RAM_SIZE_0 (0x1UL << FLASH_OPTSR_ST_RAM_SIZE_Pos) /*!< 0x00080000 */ +#define FLASH_OPTSR_ST_RAM_SIZE_1 (0x2UL << FLASH_OPTSR_ST_RAM_SIZE_Pos) /*!< 0x00100000 */ +#define FLASH_OPTSR_SECURITY_Pos (21U) +#define FLASH_OPTSR_SECURITY_Msk (0x1UL << FLASH_OPTSR_SECURITY_Pos) /*!< 0x00200000 */ +#define FLASH_OPTSR_SECURITY FLASH_OPTSR_SECURITY_Msk /*!< Security enable option status bit */ +#define FLASH_OPTSR_BCM4_Pos (22U) +#define FLASH_OPTSR_BCM4_Msk (0x1UL << FLASH_OPTSR_BCM4_Pos) /*!< 0x00400000 */ +#define FLASH_OPTSR_BCM4 FLASH_OPTSR_BCM4_Msk /*!< Arm Cortex-M4 boot option status bit */ +#define FLASH_OPTSR_BCM7_Pos (23U) +#define FLASH_OPTSR_BCM7_Msk (0x1UL << FLASH_OPTSR_BCM7_Pos) /*!< 0x00800000 */ +#define FLASH_OPTSR_BCM7 FLASH_OPTSR_BCM7_Msk /*!< Arm Cortex-M7 boot option status bit */ +#define FLASH_OPTSR_NRST_STOP_D2_Pos (24U) +#define FLASH_OPTSR_NRST_STOP_D2_Msk (0x1UL << FLASH_OPTSR_NRST_STOP_D2_Pos) /*!< 0x01000000 */ +#define FLASH_OPTSR_NRST_STOP_D2 FLASH_OPTSR_NRST_STOP_D2_Msk /*!< D2 domain DStop entry reset option status bit */ +#define FLASH_OPTSR_NRST_STBY_D2_Pos (25U) +#define FLASH_OPTSR_NRST_STBY_D2_Msk (0x1UL << FLASH_OPTSR_NRST_STBY_D2_Pos) /*!< 0x02000000 */ +#define FLASH_OPTSR_NRST_STBY_D2 FLASH_OPTSR_NRST_STBY_D2_Msk /*!< D2 domain DStandby entry reset option status bit */ +#define FLASH_OPTSR_IO_HSLV_Pos (29U) +#define FLASH_OPTSR_IO_HSLV_Msk (0x1UL << FLASH_OPTSR_IO_HSLV_Pos) /*!< 0x20000000 */ +#define FLASH_OPTSR_IO_HSLV FLASH_OPTSR_IO_HSLV_Msk /*!< I/O high-speed at low-voltage status bit */ +#define FLASH_OPTSR_OPTCHANGEERR_Pos (30U) +#define FLASH_OPTSR_OPTCHANGEERR_Msk (0x1UL << FLASH_OPTSR_OPTCHANGEERR_Pos) /*!< 0x40000000 */ +#define FLASH_OPTSR_OPTCHANGEERR FLASH_OPTSR_OPTCHANGEERR_Msk /*!< Option byte change error flag */ +#define FLASH_OPTSR_SWAP_BANK_OPT_Pos (31U) +#define FLASH_OPTSR_SWAP_BANK_OPT_Msk (0x1UL << FLASH_OPTSR_SWAP_BANK_OPT_Pos) /*!< 0x80000000 */ +#define FLASH_OPTSR_SWAP_BANK_OPT FLASH_OPTSR_SWAP_BANK_OPT_Msk /*!< Bank swapping option status bit */ + +/******************* Bits definition for FLASH_OPTCCR register *******************/ +#define FLASH_OPTCCR_CLR_OPTCHANGEERR_Pos (30U) +#define FLASH_OPTCCR_CLR_OPTCHANGEERR_Msk (0x1UL << FLASH_OPTCCR_CLR_OPTCHANGEERR_Pos) /*!< 0x40000000 */ +#define FLASH_OPTCCR_CLR_OPTCHANGEERR FLASH_OPTCCR_CLR_OPTCHANGEERR_Msk /*!< OPTCHANGEERR reset bit */ + +/******************* Bits definition for FLASH_PRAR register *********************/ +#define FLASH_PRAR_PROT_AREA_START_Pos (0U) +#define FLASH_PRAR_PROT_AREA_START_Msk (0xFFFUL << FLASH_PRAR_PROT_AREA_START_Pos) /*!< 0x00000FFF */ +#define FLASH_PRAR_PROT_AREA_START FLASH_PRAR_PROT_AREA_START_Msk /*!< PCROP area start status bits */ +#define FLASH_PRAR_PROT_AREA_END_Pos (16U) +#define FLASH_PRAR_PROT_AREA_END_Msk (0xFFFUL << FLASH_PRAR_PROT_AREA_END_Pos) /*!< 0x0FFF0000 */ +#define FLASH_PRAR_PROT_AREA_END FLASH_PRAR_PROT_AREA_END_Msk /*!< PCROP area end status bits */ +#define FLASH_PRAR_DMEP_Pos (31U) +#define FLASH_PRAR_DMEP_Msk (0x1UL << FLASH_PRAR_DMEP_Pos) /*!< 0x80000000 */ +#define FLASH_PRAR_DMEP FLASH_PRAR_DMEP_Msk /*!< PCROP protected erase enable option status bit */ + +/******************* Bits definition for FLASH_SCAR register *********************/ +#define FLASH_SCAR_SEC_AREA_START_Pos (0U) +#define FLASH_SCAR_SEC_AREA_START_Msk (0xFFFUL << FLASH_SCAR_SEC_AREA_START_Pos) /*!< 0x00000FFF */ +#define FLASH_SCAR_SEC_AREA_START FLASH_SCAR_SEC_AREA_START_Msk /*!< Secure-only area start status bits */ +#define FLASH_SCAR_SEC_AREA_END_Pos (16U) +#define FLASH_SCAR_SEC_AREA_END_Msk (0xFFFUL << FLASH_SCAR_SEC_AREA_END_Pos) /*!< 0x0FFF0000 */ +#define FLASH_SCAR_SEC_AREA_END FLASH_SCAR_SEC_AREA_END_Msk /*!< Secure-only area end status bits */ +#define FLASH_SCAR_DMES_Pos (31U) +#define FLASH_SCAR_DMES_Msk (0x1UL << FLASH_SCAR_DMES_Pos) /*!< 0x80000000 */ +#define FLASH_SCAR_DMES FLASH_SCAR_DMES_Msk /*!< Secure access protected erase enable option status bit */ + +/******************* Bits definition for FLASH_WPSN register *********************/ +#define FLASH_WPSN_WRPSN_Pos (0U) +#define FLASH_WPSN_WRPSN_Msk (0xFFUL << FLASH_WPSN_WRPSN_Pos) /*!< 0x000000FF */ +#define FLASH_WPSN_WRPSN FLASH_WPSN_WRPSN_Msk /*!< Sector write protection option status byte */ + +/******************* Bits definition for FLASH_BOOT7_CUR register ****************/ +#define FLASH_BOOT7_BCM7_ADD0_Pos (0U) +#define FLASH_BOOT7_BCM7_ADD0_Msk (0xFFFFUL << FLASH_BOOT7_BCM7_ADD0_Pos) /*!< 0x0000FFFF */ +#define FLASH_BOOT7_BCM7_ADD0 FLASH_BOOT7_BCM7_ADD0_Msk /*!< Arm Cortex-M7 boot address 0 */ +#define FLASH_BOOT7_BCM7_ADD1_Pos (16U) +#define FLASH_BOOT7_BCM7_ADD1_Msk (0xFFFFUL << FLASH_BOOT7_BCM7_ADD1_Pos) /*!< 0xFFFF0000 */ +#define FLASH_BOOT7_BCM7_ADD1 FLASH_BOOT7_BCM7_ADD1_Msk /*!< Arm Cortex-M7 boot address 1 */ + +/******************* Bits definition for FLASH_BOOT4 register ********************/ +#define FLASH_BOOT4_BCM4_ADD0_Pos (0U) +#define FLASH_BOOT4_BCM4_ADD0_Msk (0xFFFFUL << FLASH_BOOT4_BCM4_ADD0_Pos) /*!< 0x0000FFFF */ +#define FLASH_BOOT4_BCM4_ADD0 FLASH_BOOT4_BCM4_ADD0_Msk /*!< Arm Cortex-M4 boot address 0 */ +#define FLASH_BOOT4_BCM4_ADD1_Pos (16U) +#define FLASH_BOOT4_BCM4_ADD1_Msk (0xFFFFUL << FLASH_BOOT4_BCM4_ADD1_Pos) /*!< 0xFFFF0000 */ +#define FLASH_BOOT4_BCM4_ADD1 FLASH_BOOT4_BCM4_ADD1_Msk /*!< Arm Cortex-M4 boot address 1 */ + +/******************* Bits definition for FLASH_CRCCR register ********************/ +#define FLASH_CRCCR_CRC_SECT_Pos (0U) +#define FLASH_CRCCR_CRC_SECT_Msk (0x7UL << FLASH_CRCCR_CRC_SECT_Pos) /*!< 0x00000007 */ +#define FLASH_CRCCR_CRC_SECT FLASH_CRCCR_CRC_SECT_Msk /*!< CRC sector number */ +#define FLASH_CRCCR_CRC_BY_SECT_Pos (8U) +#define FLASH_CRCCR_CRC_BY_SECT_Msk (0x1UL << FLASH_CRCCR_CRC_BY_SECT_Pos) /*!< 0x00000100 */ +#define FLASH_CRCCR_CRC_BY_SECT FLASH_CRCCR_CRC_BY_SECT_Msk /*!< CRC sector mode select bit */ +#define FLASH_CRCCR_ADD_SECT_Pos (9U) +#define FLASH_CRCCR_ADD_SECT_Msk (0x1UL << FLASH_CRCCR_ADD_SECT_Pos) /*!< 0x00000200 */ +#define FLASH_CRCCR_ADD_SECT FLASH_CRCCR_ADD_SECT_Msk /*!< CRC sector select bit */ +#define FLASH_CRCCR_CLEAN_SECT_Pos (10U) +#define FLASH_CRCCR_CLEAN_SECT_Msk (0x1UL << FLASH_CRCCR_CLEAN_SECT_Pos) /*!< 0x00000400 */ +#define FLASH_CRCCR_CLEAN_SECT FLASH_CRCCR_CLEAN_SECT_Msk /*!< CRC sector list clear bit */ +#define FLASH_CRCCR_START_CRC_Pos (16U) +#define FLASH_CRCCR_START_CRC_Msk (0x1UL << FLASH_CRCCR_START_CRC_Pos) /*!< 0x00010000 */ +#define FLASH_CRCCR_START_CRC FLASH_CRCCR_START_CRC_Msk /*!< CRC start bit */ +#define FLASH_CRCCR_CLEAN_CRC_Pos (17U) +#define FLASH_CRCCR_CLEAN_CRC_Msk (0x1UL << FLASH_CRCCR_CLEAN_CRC_Pos) /*!< 0x00020000 */ +#define FLASH_CRCCR_CLEAN_CRC FLASH_CRCCR_CLEAN_CRC_Msk /*!< CRC clear bit */ +#define FLASH_CRCCR_CRC_BURST_Pos (20U) +#define FLASH_CRCCR_CRC_BURST_Msk (0x3UL << FLASH_CRCCR_CRC_BURST_Pos) /*!< 0x00300000 */ +#define FLASH_CRCCR_CRC_BURST FLASH_CRCCR_CRC_BURST_Msk /*!< CRC burst size */ +#define FLASH_CRCCR_CRC_BURST_0 (0x1UL << FLASH_CRCCR_CRC_BURST_Pos) /*!< 0x00100000 */ +#define FLASH_CRCCR_CRC_BURST_1 (0x2UL << FLASH_CRCCR_CRC_BURST_Pos) /*!< 0x00200000 */ +#define FLASH_CRCCR_ALL_BANK_Pos (22U) +#define FLASH_CRCCR_ALL_BANK_Msk (0x1UL << FLASH_CRCCR_ALL_BANK_Pos) /*!< 0x00400000 */ +#define FLASH_CRCCR_ALL_BANK FLASH_CRCCR_ALL_BANK_Msk /*!< CRC select bit */ + +/******************* Bits definition for FLASH_CRCSADD register ****************/ +#define FLASH_CRCSADD_CRC_START_ADDR_Pos (0U) +#define FLASH_CRCSADD_CRC_START_ADDR_Msk (0xFFFFFFFFUL << FLASH_CRCSADD_CRC_START_ADDR_Pos) /*!< 0xFFFFFFFF */ +#define FLASH_CRCSADD_CRC_START_ADDR FLASH_CRCSADD_CRC_START_ADDR_Msk /*!< CRC start address */ + +/******************* Bits definition for FLASH_CRCEADD register ****************/ +#define FLASH_CRCEADD_CRC_END_ADDR_Pos (0U) +#define FLASH_CRCEADD_CRC_END_ADDR_Msk (0xFFFFFFFFUL << FLASH_CRCEADD_CRC_END_ADDR_Pos) /*!< 0xFFFFFFFF */ +#define FLASH_CRCEADD_CRC_END_ADDR FLASH_CRCEADD_CRC_END_ADDR_Msk /*!< CRC end address */ + +/******************* Bits definition for FLASH_CRCDATA register ***************/ +#define FLASH_CRCDATA_CRC_DATA_Pos (0U) +#define FLASH_CRCDATA_CRC_DATA_Msk (0xFFFFFFFFUL << FLASH_CRCDATA_CRC_DATA_Pos) /*!< 0xFFFFFFFF */ +#define FLASH_CRCDATA_CRC_DATA FLASH_CRCDATA_CRC_DATA_Msk /*!< CRC result */ + +/******************* Bits definition for FLASH_ECC_FA register *******************/ +#define FLASH_ECC_FA_FAIL_ECC_ADDR_Pos (0U) +#define FLASH_ECC_FA_FAIL_ECC_ADDR_Msk (0x7FFFUL << FLASH_ECC_FA_FAIL_ECC_ADDR_Pos) /*!< 0x00007FFF */ +#define FLASH_ECC_FA_FAIL_ECC_ADDR FLASH_ECC_FA_FAIL_ECC_ADDR_Msk /*!< ECC error address */ + +/******************************************************************************/ +/* */ +/* Flexible Memory Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for FMC_BCR1 register *******************/ +#define FMC_BCR1_CCLKEN_Pos (20U) +#define FMC_BCR1_CCLKEN_Msk (0x1UL << FMC_BCR1_CCLKEN_Pos) /*!< 0x00100000 */ +#define FMC_BCR1_CCLKEN FMC_BCR1_CCLKEN_Msk /*! 0UL) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) + +/** + * @} + */ + +#if !defined(SYSCFG_PMCR_BOOSTEN) +/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO + * @{ + */ + +/** @brief Fast-mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_PMCR_I2C_PB6_FMP /*!< Enable Fast-mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_PMCR_I2C_PB7_FMP /*!< Enable Fast-mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_PMCR_I2C_PB8_FMP /*!< Enable Fast-mode Plus on PB8 */ +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_PMCR_I2C_PB9_FMP /*!< Enable Fast-mode Plus on PB9 */ + +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) + +/** + * @} + */ +#endif /* ! SYSCFG_PMCR_BOOSTEN */ + + +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT0) || defined(SYSCFG_ADC2ALT_ADC2_ROUT1) +/** @defgroup SYSCFG_Adc2_Alternate_Connection SYSCFG ADC2 Alternate Connection + * @{ + */ + +/** @brief Adc2 Alternate Connection on Vinp[16] and Vinp[17] + */ +#define SYSCFG_ADC2_ROUT0_DAC1_1 ((uint32_t)0x00000000) /*!< DAC1_out1 connected to ADC2 VINP[16] */ +#define SYSCFG_ADC2_ROUT0_VBAT4 SYSCFG_ADC2ALT_ADC2_ROUT0 /*!< VBAT/4 connected to ADC2 VINP[16] */ +#define SYSCFG_ADC2_ROUT1_DAC1_2 ((uint32_t)0x00000000) /*!< DAC1_out2 connected to ADC2 VINP[17] */ +#define SYSCFG_ADC2_ROUT1_VREFINT SYSCFG_ADC2ALT_ADC2_ROUT1 /*!< VREFINT connected to ADC2 VINP[17] */ + +#define IS_SYSCFG_ADC2ALT_ROUT0(__VALUE__) (((__VALUE__) == SYSCFG_ADC2_ROUT0_DAC1_1) || \ + ((__VALUE__) == SYSCFG_ADC2_ROUT0_VBAT4)) +#define IS_SYSCFG_ADC2ALT_ROUT1(__VALUE__) (((__VALUE__) == SYSCFG_ADC2_ROUT1_DAC1_2) || \ + ((__VALUE__) == SYSCFG_ADC2_ROUT1_VREFINT)) + +/** + * @} + */ +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT0 || SYSCFG_ADC2ALT_ADC2_ROUT1*/ + + +/** @defgroup SYSCFG_Ethernet_Config Ethernet Config + * @{ + */ +#define SYSCFG_ETH_MII ((uint32_t)0x00000000) /*!< Select the Media Independent Interface */ +#define SYSCFG_ETH_RMII SYSCFG_PMCR_EPIS_SEL_2 /*!< Select the Reduced Media Independent Interface */ + +#define IS_SYSCFG_ETHERNET_CONFIG(CONFIG) (((CONFIG) == SYSCFG_ETH_MII) || \ + ((CONFIG) == SYSCFG_ETH_RMII)) + +/** + * @} + */ + + +/** @defgroup SYSCFG_Analog_Switch_Config Analog Switch Config + * @{ + */ +#define SYSCFG_SWITCH_PA0 SYSCFG_PMCR_PA0SO /*!< Select PA0 analog switch */ +#define SYSCFG_SWITCH_PA1 SYSCFG_PMCR_PA1SO /*!< Select PA1 analog switch */ +#define SYSCFG_SWITCH_PC2 SYSCFG_PMCR_PC2SO /*!< Select PC2 analog switch */ +#define SYSCFG_SWITCH_PC3 SYSCFG_PMCR_PC3SO /*!< Select PC3 analog switch */ + + + + +#define SYSCFG_SWITCH_PA0_OPEN SYSCFG_PMCR_PA0SO /*!< PA0 analog switch opened */ +#define SYSCFG_SWITCH_PA0_CLOSE ((uint32_t)0x00000000) /*!< PA0 analog switch closed */ +#define SYSCFG_SWITCH_PA1_OPEN SYSCFG_PMCR_PA1SO /*!< PA1 analog switch opened */ +#define SYSCFG_SWITCH_PA1_CLOSE ((uint32_t)0x00000000) /*!< PA1 analog switch closed*/ +#define SYSCFG_SWITCH_PC2_OPEN SYSCFG_PMCR_PC2SO /*!< PC2 analog switch opened */ +#define SYSCFG_SWITCH_PC2_CLOSE ((uint32_t)0x00000000) /*!< PC2 analog switch closed */ +#define SYSCFG_SWITCH_PC3_OPEN SYSCFG_PMCR_PC3SO /*!< PC3 analog switch opened */ +#define SYSCFG_SWITCH_PC3_CLOSE ((uint32_t)0x00000000) /*!< PC3 analog switch closed */ + +/** + * @} + */ + +#define IS_SYSCFG_ANALOG_SWITCH(SWITCH) ((((SWITCH) & SYSCFG_SWITCH_PA0) == SYSCFG_SWITCH_PA0)|| \ + (((SWITCH) & SYSCFG_SWITCH_PA1) == SYSCFG_SWITCH_PA1) || \ + (((SWITCH) & SYSCFG_SWITCH_PC2) == SYSCFG_SWITCH_PC2) || \ + (((SWITCH) & SYSCFG_SWITCH_PC3) == SYSCFG_SWITCH_PC3)) + + +#define IS_SYSCFG_SWITCH_STATE(STATE) ((((STATE) & SYSCFG_SWITCH_PA0_OPEN) == SYSCFG_SWITCH_PA0_OPEN) || \ + (((STATE) & SYSCFG_SWITCH_PA0_CLOSE) == SYSCFG_SWITCH_PA0_CLOSE) || \ + (((STATE) & SYSCFG_SWITCH_PA1_OPEN) == SYSCFG_SWITCH_PA1_OPEN) || \ + (((STATE) & SYSCFG_SWITCH_PA1_CLOSE) == SYSCFG_SWITCH_PA1_CLOSE) || \ + (((STATE) & SYSCFG_SWITCH_PC2_OPEN) == SYSCFG_SWITCH_PC2_OPEN) || \ + (((STATE) & SYSCFG_SWITCH_PC2_CLOSE) == SYSCFG_SWITCH_PC2_CLOSE) || \ + (((STATE) & SYSCFG_SWITCH_PC3_OPEN) == SYSCFG_SWITCH_PC3_OPEN) || \ + (((STATE) & SYSCFG_SWITCH_PC3_CLOSE) == SYSCFG_SWITCH_PC3_CLOSE)) + + +/** @defgroup SYSCFG_Boot_Config Boot Config + * @{ + */ +#define SYSCFG_BOOT_ADDR0 ((uint32_t)0x00000000) /*!< Select Boot address0 */ +#define SYSCFG_BOOT_ADDR1 ((uint32_t)0x00000001) /*!< Select Boot address1 */ + +#define IS_SYSCFG_BOOT_REGISTER(REGISTER) (((REGISTER) == SYSCFG_BOOT_ADDR0)|| \ + ((REGISTER) == SYSCFG_BOOT_ADDR1)) + +#define IS_SYSCFG_BOOT_ADDRESS(ADDRESS) ((ADDRESS) < PERIPH_BASE) + +/** + * @} + */ + + +/** @defgroup SYSCFG_IOCompenstionCell_Config IOCompenstionCell Config + * @{ + */ +#define SYSCFG_CELL_CODE ((uint32_t)0x00000000) /*!< Select Code from the cell */ +#define SYSCFG_REGISTER_CODE SYSCFG_CCCSR_CS /*!< Code from the SYSCFG compensation cell code register */ + +#define IS_SYSCFG_CODE_SELECT(SELECT) (((SELECT) == SYSCFG_CELL_CODE)|| \ + ((SELECT) == SYSCFG_REGISTER_CODE)) + +#define IS_SYSCFG_CODE_CONFIG(CONFIG) ((CONFIG) < (0x10UL)) + +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup EXTI_Event_Input_Config Event Input Config + * @{ + */ + +#define EXTI_MODE_IT ((uint32_t)0x00010000) +#define EXTI_MODE_EVT ((uint32_t)0x00020000) +#define EXTI_RISING_EDGE ((uint32_t)0x00100000) +#define EXTI_FALLING_EDGE ((uint32_t)0x00200000) + +#define IS_EXTI_EDGE_LINE(EDGE) (((EDGE) == EXTI_RISING_EDGE) || ((EDGE) == EXTI_FALLING_EDGE)) +#define IS_EXTI_MODE_LINE(MODE) (((MODE) == EXTI_MODE_IT) || ((MODE) == EXTI_MODE_EVT)) + +#define EXTI_LINE0 ((uint32_t)0x00) /*!< External interrupt LINE 0 */ +#define EXTI_LINE1 ((uint32_t)0x01) /*!< External interrupt LINE 1 */ +#define EXTI_LINE2 ((uint32_t)0x02) /*!< External interrupt LINE 2 */ +#define EXTI_LINE3 ((uint32_t)0x03) /*!< External interrupt LINE 3 */ +#define EXTI_LINE4 ((uint32_t)0x04) /*!< External interrupt LINE 4 */ +#define EXTI_LINE5 ((uint32_t)0x05) /*!< External interrupt LINE 5 */ +#define EXTI_LINE6 ((uint32_t)0x06) /*!< External interrupt LINE 6 */ +#define EXTI_LINE7 ((uint32_t)0x07) /*!< External interrupt LINE 7 */ +#define EXTI_LINE8 ((uint32_t)0x08) /*!< External interrupt LINE 8 */ +#define EXTI_LINE9 ((uint32_t)0x09) /*!< External interrupt LINE 9 */ +#define EXTI_LINE10 ((uint32_t)0x0A) /*!< External interrupt LINE 10 */ +#define EXTI_LINE11 ((uint32_t)0x0B) /*!< External interrupt LINE 11 */ +#define EXTI_LINE12 ((uint32_t)0x0C) /*!< External interrupt LINE 12 */ +#define EXTI_LINE13 ((uint32_t)0x0D) /*!< External interrupt LINE 13 */ +#define EXTI_LINE14 ((uint32_t)0x0E) /*!< External interrupt LINE 14 */ +#define EXTI_LINE15 ((uint32_t)0x0F) /*!< External interrupt LINE 15 */ +#define EXTI_LINE16 ((uint32_t)0x10) +#define EXTI_LINE17 ((uint32_t)0x11) +#define EXTI_LINE18 ((uint32_t)0x12) +#define EXTI_LINE19 ((uint32_t)0x13) +#define EXTI_LINE20 ((uint32_t)0x14) +#define EXTI_LINE21 ((uint32_t)0x15) +#define EXTI_LINE22 ((uint32_t)0x16) +#define EXTI_LINE23 ((uint32_t)0x17) +#define EXTI_LINE24 ((uint32_t)0x18) +#define EXTI_LINE25 ((uint32_t)0x19) +#define EXTI_LINE26 ((uint32_t)0x1A) +#define EXTI_LINE27 ((uint32_t)0x1B) +#define EXTI_LINE28 ((uint32_t)0x1C) +#define EXTI_LINE29 ((uint32_t)0x1D) +#define EXTI_LINE30 ((uint32_t)0x1E) +#define EXTI_LINE31 ((uint32_t)0x1F) +#define EXTI_LINE32 ((uint32_t)0x20) +#define EXTI_LINE33 ((uint32_t)0x21) +#define EXTI_LINE34 ((uint32_t)0x22) +#define EXTI_LINE35 ((uint32_t)0x23) +#define EXTI_LINE36 ((uint32_t)0x24) +#define EXTI_LINE37 ((uint32_t)0x25) +#define EXTI_LINE38 ((uint32_t)0x26) +#define EXTI_LINE39 ((uint32_t)0x27) + +#define EXTI_LINE40 ((uint32_t)0x28) +#define EXTI_LINE41 ((uint32_t)0x29) +#define EXTI_LINE42 ((uint32_t)0x2A) +#define EXTI_LINE43 ((uint32_t)0x2B) +#define EXTI_LINE44 ((uint32_t)0x2C) /* Not available in all family lines */ +/* EXTI_LINE45 Reserved */ +#if defined(DUAL_CORE) +#define EXTI_LINE46 ((uint32_t)0x2E) +#else +/* EXTI_LINE46 Reserved */ +#endif /* DUAL_CORE */ +#define EXTI_LINE47 ((uint32_t)0x2F) +#define EXTI_LINE48 ((uint32_t)0x30) +#define EXTI_LINE49 ((uint32_t)0x31) +#define EXTI_LINE50 ((uint32_t)0x32) +#define EXTI_LINE51 ((uint32_t)0x33) +#define EXTI_LINE52 ((uint32_t)0x34) +#define EXTI_LINE53 ((uint32_t)0x35) +#define EXTI_LINE54 ((uint32_t)0x36) +#define EXTI_LINE55 ((uint32_t)0x37) +#define EXTI_LINE56 ((uint32_t)0x38) +#define EXTI_LINE57 ((uint32_t)0x39) +#define EXTI_LINE58 ((uint32_t)0x3A) +#define EXTI_LINE59 ((uint32_t)0x3B) +#define EXTI_LINE60 ((uint32_t)0x3C) +#define EXTI_LINE61 ((uint32_t)0x3D) +#define EXTI_LINE62 ((uint32_t)0x3E) +#define EXTI_LINE63 ((uint32_t)0x3F) +#define EXTI_LINE64 ((uint32_t)0x40) +#define EXTI_LINE65 ((uint32_t)0x41) +#define EXTI_LINE66 ((uint32_t)0x42) +#define EXTI_LINE67 ((uint32_t)0x43) +#define EXTI_LINE68 ((uint32_t)0x44) +#define EXTI_LINE69 ((uint32_t)0x45) +#define EXTI_LINE70 ((uint32_t)0x46) +#define EXTI_LINE71 ((uint32_t)0x47) +#define EXTI_LINE72 ((uint32_t)0x48) +#define EXTI_LINE73 ((uint32_t)0x49) +#define EXTI_LINE74 ((uint32_t)0x4A) +#define EXTI_LINE75 ((uint32_t)0x4B) /* Not available in all family lines */ +#define EXTI_LINE76 ((uint32_t)0x4C) /* Not available in all family lines */ +#if defined(DUAL_CORE) +#define EXTI_LINE77 ((uint32_t)0x4D) +#define EXTI_LINE78 ((uint32_t)0x4E) +#define EXTI_LINE79 ((uint32_t)0x4F) +#define EXTI_LINE80 ((uint32_t)0x50) +#else +/* EXTI_LINE77 Reserved */ +/* EXTI_LINE78 Reserved */ +/* EXTI_LINE79 Reserved */ +/* EXTI_LINE80 Reserved */ +#endif /* DUAL_CORE */ +/* EXTI_LINE81 Reserved */ +#if defined(DUAL_CORE) +#define EXTI_LINE82 ((uint32_t)0x52) +#else +/* EXTI_LINE82 Reserved */ +#endif /* DUAL_CORE */ +/* EXTI_LINE83 Reserved */ +#if defined(DUAL_CORE) +#define EXTI_LINE84 ((uint32_t)0x54) +#else +/* EXTI_LINE84 Reserved */ +#endif /* DUAL_CORE */ +#define EXTI_LINE85 ((uint32_t)0x55) +#define EXTI_LINE86 ((uint32_t)0x56) /* Not available in all family lines */ +#define EXTI_LINE87 ((uint32_t)0x57) +#define EXTI_LINE88 ((uint32_t)0x58) /* Not available in all family lines */ +#define EXTI_LINE89 ((uint32_t)0x59) /* Not available in all family lines */ +#define EXTI_LINE90 ((uint32_t)0x5A) /* Not available in all family lines */ +#define EXTI_LINE91 ((uint32_t)0x5B) /* Not available in all family lines */ + +#if defined(DUAL_CORE) +#define IS_HAL_EXTI_CONFIG_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE51) || \ + ((LINE) == EXTI_LINE82) || ((LINE) == EXTI_LINE84) || \ + ((LINE) == EXTI_LINE85) || ((LINE) == EXTI_LINE86)) +#else +#define IS_HAL_EXTI_CONFIG_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1)|| \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE51) || \ + ((LINE) == EXTI_LINE85) || ((LINE) == EXTI_LINE86)) +#endif /* DUAL_CORE */ + +#if defined(DUAL_CORE) +#define IS_EXTI_ALL_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || ((LINE) == EXTI_LINE46) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE77) || ((LINE) == EXTI_LINE79) || \ + ((LINE) == EXTI_LINE84) || ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87) || \ + ((LINE) == EXTI_LINE78) || \ + ((LINE) == EXTI_LINE80) || ((LINE) == EXTI_LINE82)) +#else +#define IS_EXTI_ALL_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87) || \ + ((LINE) == EXTI_LINE88) || ((LINE) == EXTI_LINE89) || \ + ((LINE) == EXTI_LINE90) || ((LINE) == EXTI_LINE91)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_EXTI_D1_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || ((LINE) == EXTI_LINE46) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE77) || ((LINE) == EXTI_LINE79) || \ + ((LINE) == EXTI_LINE84) || ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87)) +#else +#define IS_EXTI_D1_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87) || \ + ((LINE) == EXTI_LINE88) || ((LINE) == EXTI_LINE89) || \ + ((LINE) == EXTI_LINE90) || ((LINE) == EXTI_LINE91)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_EXTI_D2_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || ((LINE) == EXTI_LINE46) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE78) || ((LINE) == EXTI_LINE80) || \ + ((LINE) == EXTI_LINE82) || ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_EXTI_D3_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE19) || ((LINE) == EXTI_LINE20) || \ + ((LINE) == EXTI_LINE21) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE41) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53)) +#elif (POWER_DOMAINS_NUMBER == 3U) +#define IS_EXTI_D3_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE19) || ((LINE) == EXTI_LINE20) || \ + ((LINE) == EXTI_LINE21) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE41) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE88)) +#else +#define IS_EXTI_D3_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE19) || ((LINE) == EXTI_LINE20) || \ + ((LINE) == EXTI_LINE21) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE41) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE88)) +#endif /*DUAL_CORE*/ + + +#define BDMA_CH6_CLEAR ((uint32_t)0x00000000) /*!< BDMA ch6 event selected as D3 domain pendclear source*/ +#define BDMA_CH7_CLEAR ((uint32_t)0x00000001) /*!< BDMA ch7 event selected as D3 domain pendclear source*/ +#if defined (LPTIM4) +#define LPTIM4_OUT_CLEAR ((uint32_t)0x00000002) /*!< LPTIM4 out selected as D3 domain pendclear source*/ +#else +#define LPTIM2_OUT_CLEAR ((uint32_t)0x00000002) /*!< LPTIM2 out selected as D3 domain pendclear source*/ +#endif /* LPTIM4 */ +#if defined (LPTIM5) +#define LPTIM5_OUT_CLEAR ((uint32_t)0x00000003) /*!< LPTIM5 out selected as D3 domain pendclear source*/ +#else +#define LPTIM3_OUT_CLEAR ((uint32_t)0x00000003) /*!< LPTIM3 out selected as D3 domain pendclear source*/ +#endif /* LPTIM5 */ +#if defined (LPTIM4) && defined (LPTIM5) +#define IS_EXTI_D3_CLEAR(SOURCE) (((SOURCE) == BDMA_CH6_CLEAR) || ((SOURCE) == BDMA_CH7_CLEAR) || \ + ((SOURCE) == LPTIM4_OUT_CLEAR) || ((SOURCE) == LPTIM5_OUT_CLEAR)) +#else +#define IS_EXTI_D3_CLEAR(SOURCE) (((SOURCE) == BDMA_CH6_CLEAR) || ((SOURCE) == BDMA_CH7_CLEAR) || \ + ((SOURCE) == LPTIM2_OUT_CLEAR) || ((SOURCE) == LPTIM3_OUT_CLEAR)) +#endif /* LPTIM4 LPTIM5 */ +/** + * @} + */ + + +/** @defgroup FMC_SwapBankMapping_Config SwapBankMapping Config + * @{ + */ +#define FMC_SWAPBMAP_DISABLE (0x00000000U) +#define FMC_SWAPBMAP_SDRAM_SRAM FMC_BCR1_BMAP_0 +#define FMC_SWAPBMAP_SDRAMB2 FMC_BCR1_BMAP_1 + +#define IS_FMC_SWAPBMAP_MODE(__MODE__) (((__MODE__) == FMC_SWAPBMAP_DISABLE) || \ + ((__MODE__) == FMC_SWAPBMAP_SDRAM_SRAM) || \ + ((__MODE__) == FMC_SWAPBMAP_SDRAMB2)) +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ +#if defined(DUAL_CORE) +/** @defgroup ART_Exported_Macros ART Exported Macros + * @{ + */ + +/** @brief ART Enable Macro. + * Enable the Cortex-M4 ART cache. + */ +#define __HAL_ART_ENABLE() SET_BIT(ART->CTR, ART_CTR_EN) + +/** @brief ART Disable Macro. + * Disable the Cortex-M4 ART cache. + */ +#define __HAL_ART_DISABLE() CLEAR_BIT(ART->CTR, ART_CTR_EN) + +/** @brief ART Cache BaseAddress Config. + * Configure the Cortex-M4 ART cache Base Address. + */ +#define __HAL_ART_CONFIG_BASE_ADDRESS(__BASE_ADDRESS__) MODIFY_REG(ART->CTR, ART_CTR_PCACHEADDR, (((__BASE_ADDRESS__) >> 12U) & 0x000FFF00UL)) + +/** + * @} + */ +#endif /* DUAL_CORE */ + +/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros + * @{ + */ + +/** @brief SYSCFG Break AXIRAM double ECC lock. + * Enable and lock the connection of AXIRAM double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_AXISRAM_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML) + +/** @brief SYSCFG Break ITCM double ECC lock. + * Enable and lock the connection of ITCM double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_ITCM_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_ITCML) + +/** @brief SYSCFG Break DTCM double ECC lock. + * Enable and lock the connection of DTCM double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_DTCM_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_DTCML) + +/** @brief SYSCFG Break SRAM1 double ECC lock. + * Enable and lock the connection of SRAM1 double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_SRAM1_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_SRAM1L) + +/** @brief SYSCFG Break SRAM2 double ECC lock. + * Enable and lock the connection of SRAM2 double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_SRAM2_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_SRAM2L) + +/** @brief SYSCFG Break SRAM3 double ECC lock. + * Enable and lock the connection of SRAM3 double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_SRAM3_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_SRAM3L) + +/** @brief SYSCFG Break SRAM4 double ECC lock. + * Enable and lock the connection of SRAM4 double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_SRAM4_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_SRAM4L) + +/** @brief SYSCFG Break Backup SRAM double ECC lock. + * Enable and lock the connection of Backup SRAM double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_BKRAM_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_BKRAML) + +/** @brief SYSCFG Break Cortex-M7 Lockup lock. + * Enable and lock the connection of Cortex-M7 LOCKUP output to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_CM7_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_CM7L) + +/** @brief SYSCFG Break FLASH double ECC lock. + * Enable and lock the connection of Flash double ECC error connection to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_FLASH_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_FLASHL) + +/** @brief SYSCFG Break PVD lock. + * Enable and lock the PVD connection to Timer1/8/15/16/17 and HRTIMER Break input, as well as the PVDE and PLS[2:0] in the PWR_CR1 register. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_PVDL) + +#if defined(DUAL_CORE) +/** @brief SYSCFG Break Cortex-M4 Lockup lock. + * Enable and lock the connection of Cortex-M4 LOCKUP output to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_CM4_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_CM4L) +#endif /* DUAL_CORE */ + +#if !defined(SYSCFG_PMCR_BOOSTEN) +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of : + * @arg @ref SYSCFG_FASTMODEPLUS_PB6 Fast-mode Plus driving capability activation on PB6 + * @arg @ref SYSCFG_FASTMODEPLUS_PB7 Fast-mode Plus driving capability activation on PB7 + * @arg @ref SYSCFG_FASTMODEPLUS_PB8 Fast-mode Plus driving capability activation on PB8 + * @arg @ref SYSCFG_FASTMODEPLUS_PB9 Fast-mode Plus driving capability activation on PB9 + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->PMCR, (__FASTMODEPLUS__));\ + }while(0) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->PMCR, (__FASTMODEPLUS__));\ + }while(0) + +#endif /* !SYSCFG_PMCR_BOOSTEN */ +/** + * @} + */ + +/** @defgroup DBG_Exported_Macros DBG Exported Macros + * @{ + */ + +/** @brief Freeze/Unfreeze Peripherals in Debug mode + */ +#define __HAL_DBGMCU_FREEZE_WWDG1() (DBGMCU->APB3FZ1 |= (DBGMCU_APB3FZ1_DBG_WWDG1)) + +#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM2)) +#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM3)) +#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM4)) +#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM5)) +#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM6)) +#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM7)) +#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM12)) +#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM13)) +#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM14)) +#define __HAL_DBGMCU_FREEZE_LPTIM1() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_LPTIM1)) +#define __HAL_DBGMCU_FREEZE_I2C1() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_I2C1)) +#define __HAL_DBGMCU_FREEZE_I2C2() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_I2C2)) +#define __HAL_DBGMCU_FREEZE_I2C3() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_I2C3)) +#if defined(I2C5) +#define __HAL_DBGMCU_FREEZE_I2C5() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_I2C5)) +#endif /*I2C5*/ +#if defined(DBGMCU_APB1HFZ1_DBG_FDCAN) +#define __HAL_DBGMCU_FREEZE_FDCAN() (DBGMCU->APB1HFZ1 |= (DBGMCU_APB1HFZ1_DBG_FDCAN)) +#endif /*DBGMCU_APB1HFZ1_DBG_FDCAN*/ + +#if defined(TIM23) +#define __HAL_DBGMCU_FREEZE_TIM23() (DBGMCU->APB1HFZ1 |= (DBGMCU_APB1HFZ1_DBG_TIM23)) +#endif /*TIM23*/ +#if defined(TIM24) +#define __HAL_DBGMCU_FREEZE_TIM24() (DBGMCU->APB1HFZ1 |= (DBGMCU_APB1HFZ1_DBG_TIM24)) +#endif /*TIM24*/ + +#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM1)) +#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM8)) +#define __HAL_DBGMCU_FREEZE_TIM15() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM15)) +#define __HAL_DBGMCU_FREEZE_TIM16() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM16)) +#define __HAL_DBGMCU_FREEZE_TIM17() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM17)) +#define __HAL_DBGMCU_FREEZE_HRTIM() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_HRTIM)) + +#define __HAL_DBGMCU_FREEZE_I2C4() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_I2C4)) +#define __HAL_DBGMCU_FREEZE_LPTIM2() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_LPTIM2)) +#define __HAL_DBGMCU_FREEZE_LPTIM3() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_LPTIM3)) +#define __HAL_DBGMCU_FREEZE_LPTIM4() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_LPTIM4)) +#define __HAL_DBGMCU_FREEZE_LPTIM5() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_LPTIM5)) +#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_RTC)) +#define __HAL_DBGMCU_FREEZE_IWDG1() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_IWDG1)) + + +#define __HAL_DBGMCU_UnFreeze_WWDG1() (DBGMCU->APB3FZ1 &= ~ (DBGMCU_APB3FZ1_DBG_WWDG1)) + +#define __HAL_DBGMCU_UnFreeze_TIM2() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM2)) +#define __HAL_DBGMCU_UnFreeze_TIM3() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM3)) +#define __HAL_DBGMCU_UnFreeze_TIM4() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM4)) +#define __HAL_DBGMCU_UnFreeze_TIM5() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM5)) +#define __HAL_DBGMCU_UnFreeze_TIM6() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM6)) +#define __HAL_DBGMCU_UnFreeze_TIM7() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM7)) +#define __HAL_DBGMCU_UnFreeze_TIM12() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM12)) +#define __HAL_DBGMCU_UnFreeze_TIM13() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM13)) +#define __HAL_DBGMCU_UnFreeze_TIM14() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM14)) +#define __HAL_DBGMCU_UnFreeze_LPTIM1() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_LPTIM1)) +#define __HAL_DBGMCU_UnFreeze_I2C1() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_I2C1)) +#define __HAL_DBGMCU_UnFreeze_I2C2() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_I2C2)) +#define __HAL_DBGMCU_UnFreeze_I2C3() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_I2C3)) +#if defined(I2C5) +#define __HAL_DBGMCU_UnFreeze_I2C5() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_I2C5)) +#endif /*I2C5*/ +#if defined(DBGMCU_APB1HFZ1_DBG_FDCAN) +#define __HAL_DBGMCU_UnFreeze_FDCAN() (DBGMCU->APB1HFZ1 &= ~ (DBGMCU_APB1HFZ1_DBG_FDCAN)) +#endif /*DBGMCU_APB1HFZ1_DBG_FDCAN*/ + +#if defined(TIM23) +#define __HAL_DBGMCU_UnFreeze_TIM23() (DBGMCU->APB1HFZ1 &= ~ (DBGMCU_APB1HFZ1_DBG_TIM23)) +#endif /*TIM23*/ +#if defined(TIM24) +#define __HAL_DBGMCU_UnFreeze_TIM24() (DBGMCU->APB1HFZ1 &= ~ (DBGMCU_APB1HFZ1_DBG_TIM24)) +#endif /*TIM24*/ + +#define __HAL_DBGMCU_UnFreeze_TIM1() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM1)) +#define __HAL_DBGMCU_UnFreeze_TIM8() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM8)) +#define __HAL_DBGMCU_UnFreeze_TIM15() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM15)) +#define __HAL_DBGMCU_UnFreeze_TIM16() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM16)) +#define __HAL_DBGMCU_UnFreeze_TIM17() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM17)) +#define __HAL_DBGMCU_UnFreeze_HRTIM() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_HRTIM)) + +#define __HAL_DBGMCU_UnFreeze_I2C4() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_I2C4)) +#define __HAL_DBGMCU_UnFreeze_LPTIM2() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_LPTIM2)) +#define __HAL_DBGMCU_UnFreeze_LPTIM3() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_LPTIM3)) +#define __HAL_DBGMCU_UnFreeze_LPTIM4() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_LPTIM4)) +#define __HAL_DBGMCU_UnFreeze_LPTIM5() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_LPTIM5)) +#define __HAL_DBGMCU_UnFreeze_RTC() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_RTC)) +#define __HAL_DBGMCU_UnFreeze_IWDG1() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_IWDG1)) + + +#if defined(DUAL_CORE) +#define __HAL_DBGMCU_FREEZE2_IWDG2() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_IWDG2)) +#define __HAL_DBGMCU_FREEZE2_WWDG2() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_WWDG2)) + +#define __HAL_DBGMCU_UnFreeze2_IWDG2() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_IWDG2)) +#define __HAL_DBGMCU_UnFreeze2_WWDG2() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_WWDG2)) + + +#define __HAL_DBGMCU_FREEZE2_WWDG1() (DBGMCU->APB3FZ2 |= (DBGMCU_APB3FZ2_DBG_WWDG1)) + +#define __HAL_DBGMCU_FREEZE2_TIM2() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM2)) +#define __HAL_DBGMCU_FREEZE2_TIM3() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM3)) +#define __HAL_DBGMCU_FREEZE2_TIM4() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM4)) +#define __HAL_DBGMCU_FREEZE2_TIM5() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM5)) +#define __HAL_DBGMCU_FREEZE2_TIM6() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM6)) +#define __HAL_DBGMCU_FREEZE2_TIM7() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM7)) +#define __HAL_DBGMCU_FREEZE2_TIM12() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM12)) +#define __HAL_DBGMCU_FREEZE2_TIM13() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM13)) +#define __HAL_DBGMCU_FREEZE2_TIM14() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM14)) +#define __HAL_DBGMCU_FREEZE2_LPTIM1() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_LPTIM1)) +#define __HAL_DBGMCU_FREEZE2_I2C1() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_I2C1)) +#define __HAL_DBGMCU_FREEZE2_I2C2() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_I2C2)) +#define __HAL_DBGMCU_FREEZE2_I2C3() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_I2C3)) +#define __HAL_DBGMCU_FREEZE2_FDCAN() (DBGMCU->APB1HFZ2 |= (DBGMCU_APB1HFZ2_DBG_FDCAN)) + + +#define __HAL_DBGMCU_FREEZE2_TIM1() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM1)) +#define __HAL_DBGMCU_FREEZE2_TIM8() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM8)) +#define __HAL_DBGMCU_FREEZE2_TIM15() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM15)) +#define __HAL_DBGMCU_FREEZE2_TIM16() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM16)) +#define __HAL_DBGMCU_FREEZE2_TIM17() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM17)) +#define __HAL_DBGMCU_FREEZE2_HRTIM() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_HRTIM)) + +#define __HAL_DBGMCU_FREEZE2_I2C4() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_I2C4)) +#define __HAL_DBGMCU_FREEZE2_LPTIM2() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_LPTIM2)) +#define __HAL_DBGMCU_FREEZE2_LPTIM3() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_LPTIM3)) +#define __HAL_DBGMCU_FREEZE2_LPTIM4() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_LPTIM4)) +#define __HAL_DBGMCU_FREEZE2_LPTIM5() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_LPTIM5)) +#define __HAL_DBGMCU_FREEZE2_RTC() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_RTC)) +#define __HAL_DBGMCU_FREEZE2_IWDG1() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_IWDG1)) + +#define __HAL_DBGMCU_UnFreeze2_WWDG1() (DBGMCU->APB3FZ2 &= ~ (DBGMCU_APB3FZ2_DBG_WWDG1)) + +#define __HAL_DBGMCU_UnFreeze2_TIM2() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM2)) +#define __HAL_DBGMCU_UnFreeze2_TIM3() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM3)) +#define __HAL_DBGMCU_UnFreeze2_TIM4() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM4)) +#define __HAL_DBGMCU_UnFreeze2_TIM5() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM5)) +#define __HAL_DBGMCU_UnFreeze2_TIM6() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM6)) +#define __HAL_DBGMCU_UnFreeze2_TIM7() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM7)) +#define __HAL_DBGMCU_UnFreeze2_TIM12() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM12)) +#define __HAL_DBGMCU_UnFreeze2_TIM13() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM13)) +#define __HAL_DBGMCU_UnFreeze2_TIM14() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM14)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM1() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_LPTIM1)) +#define __HAL_DBGMCU_UnFreeze2_I2C1() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_I2C1)) +#define __HAL_DBGMCU_UnFreeze2_I2C2() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_I2C2)) +#define __HAL_DBGMCU_UnFreeze2_I2C3() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_I2C3)) +#define __HAL_DBGMCU_UnFreeze2_FDCAN() (DBGMCU->APB1HFZ2 &= ~ (DBGMCU_APB1HFZ2_DBG_FDCAN)) + + +#define __HAL_DBGMCU_UnFreeze2_TIM1() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM1)) +#define __HAL_DBGMCU_UnFreeze2_TIM8() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM8)) +#define __HAL_DBGMCU_UnFreeze2_TIM15() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM15)) +#define __HAL_DBGMCU_UnFreeze2_TIM16() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM16)) +#define __HAL_DBGMCU_UnFreeze2_TIM17() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM17)) +#define __HAL_DBGMCU_UnFreeze2_HRTIM() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_HRTIM)) + +#define __HAL_DBGMCU_UnFreeze2_I2C4() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_I2C4)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM2() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_LPTIM2)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM3() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_LPTIM3)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM4() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_LPTIM4)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM5() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_LPTIM5)) +#define __HAL_DBGMCU_UnFreeze2_RTC() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_RTC)) +#define __HAL_DBGMCU_UnFreeze2_IWDG1() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_IWDG1)) + +#endif /*DUAL_CORE*/ +/** + * @} + */ +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +/** @defgroup HAL_Group1 Initialization and de-initialization Functions + * @{ + */ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); + +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @defgroup HAL_Group2 HAL Control functions + * + */ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); +#if defined(SYSCFG_PMCR_EPIS_SEL) +void HAL_SYSCFG_ETHInterfaceSelect(uint32_t SYSCFG_ETHInterface); +#endif /* SYSCFG_PMCR_EPIS_SEL */ +void HAL_SYSCFG_AnalogSwitchConfig(uint32_t SYSCFG_AnalogSwitch , uint32_t SYSCFG_SwitchState ); +#if defined(SYSCFG_PMCR_BOOSTEN) +void HAL_SYSCFG_EnableBOOST(void); +void HAL_SYSCFG_DisableBOOST(void); +#endif /* SYSCFG_PMCR_BOOSTEN */ + +#if defined (SYSCFG_UR2_BOOT_ADD0) || defined (SYSCFG_UR2_BCM7_ADD0) +void HAL_SYSCFG_CM7BootAddConfig(uint32_t BootRegister, uint32_t BootAddress); +#endif /* SYSCFG_UR2_BOOT_ADD0 || SYSCFG_UR2_BCM7_ADD0*/ + +#if defined(DUAL_CORE) +void HAL_SYSCFG_CM4BootAddConfig(uint32_t BootRegister, uint32_t BootAddress); +void HAL_SYSCFG_EnableCM7BOOT(void); +void HAL_SYSCFG_DisableCM7BOOT(void); +void HAL_SYSCFG_EnableCM4BOOT(void); +void HAL_SYSCFG_DisableCM4BOOT(void); +#endif /*DUAL_CORE*/ +void HAL_EnableCompensationCell(void); +void HAL_DisableCompensationCell(void); +void HAL_SYSCFG_EnableIOSpeedOptimize(void); +void HAL_SYSCFG_DisableIOSpeedOptimize(void); +void HAL_SYSCFG_CompensationCodeSelect(uint32_t SYSCFG_CompCode); +void HAL_SYSCFG_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode); +#if defined(SYSCFG_CCCR_NCC_MMC) +void HAL_SYSCFG_VDDMMC_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode); +#endif /* SYSCFG_CCCR_NCC_MMC */ +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); +#if defined(DUAL_CORE) +void HAL_EnableDomain2DBGSleepMode(void); +void HAL_DisableDomain2DBGSleepMode(void); +void HAL_EnableDomain2DBGStopMode(void); +void HAL_DisableDomain2DBGStopMode(void); +void HAL_EnableDomain2DBGStandbyMode(void); +void HAL_DisableDomain2DBGStandbyMode(void); +#endif /*DUAL_CORE*/ +#if defined(DBGMCU_CR_DBG_STOPD3) +void HAL_EnableDomain3DBGStopMode(void); +void HAL_DisableDomain3DBGStopMode(void); +#endif /*DBGMCU_CR_DBG_STOPD3*/ +#if defined(DBGMCU_CR_DBG_STANDBYD3) +void HAL_EnableDomain3DBGStandbyMode(void); +void HAL_DisableDomain3DBGStandbyMode(void); +#endif /*DBGMCU_CR_DBG_STANDBYD3*/ +void HAL_EXTI_EdgeConfig(uint32_t EXTI_Line , uint32_t EXTI_Edge ); +void HAL_EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); +#if defined(DUAL_CORE) +void HAL_EXTI_D2_ClearFlag(uint32_t EXTI_Line); +#endif /*DUAL_CORE*/ +void HAL_EXTI_D1_ClearFlag(uint32_t EXTI_Line); +void HAL_EXTI_D1_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd); +#if defined(DUAL_CORE) +void HAL_EXTI_D2_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd); +#endif /*DUAL_CORE*/ +void HAL_EXTI_D3_EventInputConfig(uint32_t EXTI_Line, uint32_t EXTI_LineCmd , uint32_t EXTI_ClearSrc); +void HAL_SetFMCMemorySwappingConfig(uint32_t BankMapConfig); +uint32_t HAL_GetFMCMemorySwappingConfig(void); +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); +void HAL_SYSCFG_DisableVREFBUF(void); +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT0) +void HAL_SYSCFG_ADC2ALT_Rout0Config(uint32_t Adc2AltRout0); +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT0*/ +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT1) +void HAL_SYSCFG_ADC2ALT_Rout1Config(uint32_t Adc2AltRout1); +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT1*/ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_H */ + + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h new file mode 100644 index 0000000..134fc48 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h @@ -0,0 +1,461 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_CORTEX_H +#define STM32H7xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types Cortex Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +}MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ +#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000) +#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004) + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000) +#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002) +#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004) +#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B ((uint8_t)0x04) +#define MPU_REGION_SIZE_64B ((uint8_t)0x05) +#define MPU_REGION_SIZE_128B ((uint8_t)0x06) +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +#if !defined(CORE_CM4) +#define MPU_REGION_NUMBER8 ((uint8_t)0x08) +#define MPU_REGION_NUMBER9 ((uint8_t)0x09) +#define MPU_REGION_NUMBER10 ((uint8_t)0x0A) +#define MPU_REGION_NUMBER11 ((uint8_t)0x0B) +#define MPU_REGION_NUMBER12 ((uint8_t)0x0C) +#define MPU_REGION_NUMBER13 ((uint8_t)0x0D) +#define MPU_REGION_NUMBER14 ((uint8_t)0x0E) +#define MPU_REGION_NUMBER15 ((uint8_t)0x0F) +#endif /* !defined(CORE_CM4) */ + +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + + +/* Exported Macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + + + +/** @defgroup CORTEX_CPU_Identifier CORTEX_CPU_Identifier + * @{ + */ +#define CM7_CPUID ((uint32_t)0x00000003) + +#if defined(DUAL_CORE) +#define CM4_CPUID ((uint32_t)0x00000001) +#endif /*DUAL_CORE*/ +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +#if (__MPU_PRESENT == 1) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_EnableRegion(uint32_t RegionNumber); +void HAL_MPU_DisableRegion(uint32_t RegionNumber); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); +uint32_t HAL_GetCurrentCPUID(void); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ + ((GROUP) == NVIC_PRIORITYGROUP_1) || \ + ((GROUP) == NVIC_PRIORITYGROUP_2) || \ + ((GROUP) == NVIC_PRIORITYGROUP_3) || \ + ((GROUP) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10UL) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10UL) + +#define IS_NVIC_DEVICE_IRQ(IRQ) (((int32_t)IRQ) >= 0x00) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#if !defined(CORE_CM4) +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7) || \ + ((NUMBER) == MPU_REGION_NUMBER8) || \ + ((NUMBER) == MPU_REGION_NUMBER9) || \ + ((NUMBER) == MPU_REGION_NUMBER10) || \ + ((NUMBER) == MPU_REGION_NUMBER11) || \ + ((NUMBER) == MPU_REGION_NUMBER12) || \ + ((NUMBER) == MPU_REGION_NUMBER13) || \ + ((NUMBER) == MPU_REGION_NUMBER14) || \ + ((NUMBER) == MPU_REGION_NUMBER15)) +#else +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) +#endif /* !defined(CORE_CM4) */ + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ + ((SIZE) == MPU_REGION_SIZE_64B) || \ + ((SIZE) == MPU_REGION_SIZE_128B) || \ + ((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_CORTEX_H */ + + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h new file mode 100644 index 0000000..188e31c --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h @@ -0,0 +1,222 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DEF +#define STM32H7xx_HAL_DEF + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include "Legacy/stm32_hal_legacy.h" +#include +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00, + HAL_ERROR = 0x01, + HAL_BUSY = 0x02, + HAL_TIMEOUT = 0x03 +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00, + HAL_LOCKED = 0x01 +} HAL_LockTypeDef; + +/* Exported macro ------------------------------------------------------------*/ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0) + +#if !defined(UNUSED) +#define UNUSED(x) ((void)(x)) /* To avoid gcc/g++ warnings */ +#endif /* UNUSED */ + +/** @brief Reset the Handle's State field. + * @param __HANDLE__: specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) + +#if (USE_RTOS == 1) + #error " USE_RTOS should be 0 in the current HAL release " +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0) +#endif /* USE_RTOS */ + + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler V5 */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */ +#if defined (__GNUC__) /* GNU Compiler */ + #define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32))) +#elif defined (__ICCARM__) /* IAR Compiler */ + #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf +#elif defined (__CC_ARM) /* ARM Compiler */ + #define ALIGN_32BYTES(buf) __align(32) buf +#endif + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DEF */ + + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dfsdm.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dfsdm.h new file mode 100644 index 0000000..b4fd219 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dfsdm.h @@ -0,0 +1,871 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dfsdm.h + * @author MCD Application Team + * @brief Header file of DFSDM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DFSDM_H +#define STM32H7xx_HAL_DFSDM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup DFSDM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DFSDM_Exported_Types DFSDM Exported Types + * @{ + */ + +/** + * @brief HAL DFSDM Channel states definition + */ +typedef enum +{ + HAL_DFSDM_CHANNEL_STATE_RESET = 0x00U, /*!< DFSDM channel not initialized */ + HAL_DFSDM_CHANNEL_STATE_READY = 0x01U, /*!< DFSDM channel initialized and ready for use */ + HAL_DFSDM_CHANNEL_STATE_ERROR = 0xFFU /*!< DFSDM channel state error */ +} HAL_DFSDM_Channel_StateTypeDef; + +/** + * @brief DFSDM channel output clock structure definition + */ +typedef struct +{ + FunctionalState Activation; /*!< Output clock enable/disable */ + uint32_t Selection; /*!< Output clock is system clock or audio clock. + This parameter can be a value of @ref DFSDM_Channel_OuputClock */ + uint32_t Divider; /*!< Output clock divider. + This parameter must be a number between Min_Data = 2 and Max_Data = 256 */ +} DFSDM_Channel_OutputClockTypeDef; + +/** + * @brief DFSDM channel input structure definition + */ +typedef struct +{ + uint32_t Multiplexer; /*!< Input is external serial inputs, internal register or ADC output. + This parameter can be a value of @ref DFSDM_Channel_InputMultiplexer */ + uint32_t DataPacking; /*!< Standard, interleaved or dual mode for internal register. + This parameter can be a value of @ref DFSDM_Channel_DataPacking */ + uint32_t Pins; /*!< Input pins are taken from same or following channel. + This parameter can be a value of @ref DFSDM_Channel_InputPins */ +} DFSDM_Channel_InputTypeDef; + +/** + * @brief DFSDM channel serial interface structure definition + */ +typedef struct +{ + uint32_t Type; /*!< SPI or Manchester modes. + This parameter can be a value of @ref DFSDM_Channel_SerialInterfaceType */ + uint32_t SpiClock; /*!< SPI clock select (external or internal with different sampling point). + This parameter can be a value of @ref DFSDM_Channel_SpiClock */ +} DFSDM_Channel_SerialInterfaceTypeDef; + +/** + * @brief DFSDM channel analog watchdog structure definition + */ +typedef struct +{ + uint32_t FilterOrder; /*!< Analog watchdog Sinc filter order. + This parameter can be a value of @ref DFSDM_Channel_AwdFilterOrder */ + uint32_t Oversampling; /*!< Analog watchdog filter oversampling ratio. + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ +} DFSDM_Channel_AwdTypeDef; + +/** + * @brief DFSDM channel init structure definition + */ +typedef struct +{ + DFSDM_Channel_OutputClockTypeDef OutputClock; /*!< DFSDM channel output clock parameters */ + DFSDM_Channel_InputTypeDef Input; /*!< DFSDM channel input parameters */ + DFSDM_Channel_SerialInterfaceTypeDef SerialInterface; /*!< DFSDM channel serial interface parameters */ + DFSDM_Channel_AwdTypeDef Awd; /*!< DFSDM channel analog watchdog parameters */ + int32_t Offset; /*!< DFSDM channel offset. + This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */ + uint32_t RightBitShift; /*!< DFSDM channel right bit shift. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ +} DFSDM_Channel_InitTypeDef; + +/** + * @brief DFSDM channel handle structure definition + */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +typedef struct __DFSDM_Channel_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ +{ + DFSDM_Channel_TypeDef *Instance; /*!< DFSDM channel instance */ + DFSDM_Channel_InitTypeDef Init; /*!< DFSDM channel init parameters */ + HAL_DFSDM_Channel_StateTypeDef State; /*!< DFSDM channel state */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + void (*CkabCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel clock absence detection callback */ + void (*ScdCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel short circuit detection callback */ + void (*MspInitCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel MSP init callback */ + void (*MspDeInitCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel MSP de-init callback */ +#endif +} DFSDM_Channel_HandleTypeDef; + +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +/** + * @brief DFSDM channel callback ID enumeration definition + */ +typedef enum +{ + HAL_DFSDM_CHANNEL_CKAB_CB_ID = 0x00U, /*!< DFSDM channel clock absence detection callback ID */ + HAL_DFSDM_CHANNEL_SCD_CB_ID = 0x01U, /*!< DFSDM channel short circuit detection callback ID */ + HAL_DFSDM_CHANNEL_MSPINIT_CB_ID = 0x02U, /*!< DFSDM channel MSP init callback ID */ + HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID = 0x03U /*!< DFSDM channel MSP de-init callback ID */ +} HAL_DFSDM_Channel_CallbackIDTypeDef; + +/** + * @brief DFSDM channel callback pointer definition + */ +typedef void (*pDFSDM_Channel_CallbackTypeDef)(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +#endif + +/** + * @brief HAL DFSDM Filter states definition + */ +typedef enum +{ + HAL_DFSDM_FILTER_STATE_RESET = 0x00U, /*!< DFSDM filter not initialized */ + HAL_DFSDM_FILTER_STATE_READY = 0x01U, /*!< DFSDM filter initialized and ready for use */ + HAL_DFSDM_FILTER_STATE_REG = 0x02U, /*!< DFSDM filter regular conversion in progress */ + HAL_DFSDM_FILTER_STATE_INJ = 0x03U, /*!< DFSDM filter injected conversion in progress */ + HAL_DFSDM_FILTER_STATE_REG_INJ = 0x04U, /*!< DFSDM filter regular and injected conversions in progress */ + HAL_DFSDM_FILTER_STATE_ERROR = 0xFFU /*!< DFSDM filter state error */ +} HAL_DFSDM_Filter_StateTypeDef; + +/** + * @brief DFSDM filter regular conversion parameters structure definition + */ +typedef struct +{ + uint32_t Trigger; /*!< Trigger used to start regular conversion: software or synchronous. + This parameter can be a value of @ref DFSDM_Filter_Trigger */ + FunctionalState FastMode; /*!< Enable/disable fast mode for regular conversion */ + FunctionalState DmaMode; /*!< Enable/disable DMA for regular conversion */ +} DFSDM_Filter_RegularParamTypeDef; + +/** + * @brief DFSDM filter injected conversion parameters structure definition + */ +typedef struct +{ + uint32_t Trigger; /*!< Trigger used to start injected conversion: software, external or synchronous. + This parameter can be a value of @ref DFSDM_Filter_Trigger */ + FunctionalState ScanMode; /*!< Enable/disable scanning mode for injected conversion */ + FunctionalState DmaMode; /*!< Enable/disable DMA for injected conversion */ + uint32_t ExtTrigger; /*!< External trigger. + This parameter can be a value of @ref DFSDM_Filter_ExtTrigger */ + uint32_t ExtTriggerEdge; /*!< External trigger edge: rising, falling or both. + This parameter can be a value of @ref DFSDM_Filter_ExtTriggerEdge */ +} DFSDM_Filter_InjectedParamTypeDef; + +/** + * @brief DFSDM filter parameters structure definition + */ +typedef struct +{ + uint32_t SincOrder; /*!< Sinc filter order. + This parameter can be a value of @ref DFSDM_Filter_SincOrder */ + uint32_t Oversampling; /*!< Filter oversampling ratio. + This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */ + uint32_t IntOversampling; /*!< Integrator oversampling ratio. + This parameter must be a number between Min_Data = 1 and Max_Data = 256 */ +} DFSDM_Filter_FilterParamTypeDef; + +/** + * @brief DFSDM filter init structure definition + */ +typedef struct +{ + DFSDM_Filter_RegularParamTypeDef RegularParam; /*!< DFSDM regular conversion parameters */ + DFSDM_Filter_InjectedParamTypeDef InjectedParam; /*!< DFSDM injected conversion parameters */ + DFSDM_Filter_FilterParamTypeDef FilterParam; /*!< DFSDM filter parameters */ +} DFSDM_Filter_InitTypeDef; + +/** + * @brief DFSDM filter handle structure definition + */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +typedef struct __DFSDM_Filter_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ +{ + DFSDM_Filter_TypeDef *Instance; /*!< DFSDM filter instance */ + DFSDM_Filter_InitTypeDef Init; /*!< DFSDM filter init parameters */ + DMA_HandleTypeDef *hdmaReg; /*!< Pointer on DMA handler for regular conversions */ + DMA_HandleTypeDef *hdmaInj; /*!< Pointer on DMA handler for injected conversions */ + uint32_t RegularContMode; /*!< Regular conversion continuous mode */ + uint32_t RegularTrigger; /*!< Trigger used for regular conversion */ + uint32_t InjectedTrigger; /*!< Trigger used for injected conversion */ + uint32_t ExtTriggerEdge; /*!< Rising, falling or both edges selected */ + FunctionalState InjectedScanMode; /*!< Injected scanning mode */ + uint32_t InjectedChannelsNbr; /*!< Number of channels in injected sequence */ + uint32_t InjConvRemaining; /*!< Injected conversions remaining */ + HAL_DFSDM_Filter_StateTypeDef State; /*!< DFSDM filter state */ + uint32_t ErrorCode; /*!< DFSDM filter error code */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + void (*AwdCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Channel, uint32_t Threshold); /*!< DFSDM filter analog watchdog callback */ + void (*RegConvCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter regular conversion complete callback */ + void (*RegConvHalfCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter half regular conversion complete callback */ + void (*InjConvCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter injected conversion complete callback */ + void (*InjConvHalfCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter half injected conversion complete callback */ + void (*ErrorCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter error callback */ + void (*MspInitCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter MSP init callback */ + void (*MspDeInitCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter MSP de-init callback */ +#endif +}DFSDM_Filter_HandleTypeDef; + +/** + * @brief DFSDM filter analog watchdog parameters structure definition + */ +typedef struct +{ + uint32_t DataSource; /*!< Values from digital filter or from channel watchdog filter. + This parameter can be a value of @ref DFSDM_Filter_AwdDataSource */ + uint32_t Channel; /*!< Analog watchdog channel selection. + This parameter can be a values combination of @ref DFSDM_Channel_Selection */ + int32_t HighThreshold; /*!< High threshold for the analog watchdog. + This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */ + int32_t LowThreshold; /*!< Low threshold for the analog watchdog. + This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */ + uint32_t HighBreakSignal; /*!< Break signal assigned to analog watchdog high threshold event. + This parameter can be a values combination of @ref DFSDM_BreakSignals */ + uint32_t LowBreakSignal; /*!< Break signal assigned to analog watchdog low threshold event. + This parameter can be a values combination of @ref DFSDM_BreakSignals */ +} DFSDM_Filter_AwdParamTypeDef; + +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +/** + * @brief DFSDM filter callback ID enumeration definition + */ +typedef enum +{ + HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID = 0x00U, /*!< DFSDM filter regular conversion complete callback ID */ + HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID = 0x01U, /*!< DFSDM filter half regular conversion complete callback ID */ + HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID = 0x02U, /*!< DFSDM filter injected conversion complete callback ID */ + HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID = 0x03U, /*!< DFSDM filter half injected conversion complete callback ID */ + HAL_DFSDM_FILTER_ERROR_CB_ID = 0x04U, /*!< DFSDM filter error callback ID */ + HAL_DFSDM_FILTER_MSPINIT_CB_ID = 0x05U, /*!< DFSDM filter MSP init callback ID */ + HAL_DFSDM_FILTER_MSPDEINIT_CB_ID = 0x06U /*!< DFSDM filter MSP de-init callback ID */ +} HAL_DFSDM_Filter_CallbackIDTypeDef; + +/** + * @brief DFSDM filter callback pointer definition + */ +typedef void (*pDFSDM_Filter_CallbackTypeDef)(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +typedef void (*pDFSDM_Filter_AwdCallbackTypeDef)(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t Threshold); +#endif + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DFSDM_Exported_Constants DFSDM Exported Constants + * @{ + */ + +/** @defgroup DFSDM_Channel_OuputClock DFSDM channel output clock selection + * @{ + */ +#define DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM 0x00000000U /*!< Source for output clock is system clock */ +#define DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO DFSDM_CHCFGR1_CKOUTSRC /*!< Source for output clock is audio clock */ +/** + * @} + */ + +/** @defgroup DFSDM_Channel_InputMultiplexer DFSDM channel input multiplexer + * @{ + */ +#define DFSDM_CHANNEL_EXTERNAL_INPUTS 0x00000000U /*!< Data are taken from external inputs */ +#define DFSDM_CHANNEL_ADC_OUTPUT DFSDM_CHCFGR1_DATMPX_0 /*!< Data are taken from ADC output */ +#define DFSDM_CHANNEL_INTERNAL_REGISTER DFSDM_CHCFGR1_DATMPX_1 /*!< Data are taken from internal register */ +/** + * @} + */ + +/** @defgroup DFSDM_Channel_DataPacking DFSDM channel input data packing + * @{ + */ +#define DFSDM_CHANNEL_STANDARD_MODE 0x00000000U /*!< Standard data packing mode */ +#define DFSDM_CHANNEL_INTERLEAVED_MODE DFSDM_CHCFGR1_DATPACK_0 /*!< Interleaved data packing mode */ +#define DFSDM_CHANNEL_DUAL_MODE DFSDM_CHCFGR1_DATPACK_1 /*!< Dual data packing mode */ +/** + * @} + */ + +/** @defgroup DFSDM_Channel_InputPins DFSDM channel input pins + * @{ + */ +#define DFSDM_CHANNEL_SAME_CHANNEL_PINS 0x00000000U /*!< Input from pins on same channel */ +#define DFSDM_CHANNEL_FOLLOWING_CHANNEL_PINS DFSDM_CHCFGR1_CHINSEL /*!< Input from pins on following channel */ +/** + * @} + */ + +/** @defgroup DFSDM_Channel_SerialInterfaceType DFSDM channel serial interface type + * @{ + */ +#define DFSDM_CHANNEL_SPI_RISING 0x00000000U /*!< SPI with rising edge */ +#define DFSDM_CHANNEL_SPI_FALLING DFSDM_CHCFGR1_SITP_0 /*!< SPI with falling edge */ +#define DFSDM_CHANNEL_MANCHESTER_RISING DFSDM_CHCFGR1_SITP_1 /*!< Manchester with rising edge */ +#define DFSDM_CHANNEL_MANCHESTER_FALLING DFSDM_CHCFGR1_SITP /*!< Manchester with falling edge */ +/** + * @} + */ + +/** @defgroup DFSDM_Channel_SpiClock DFSDM channel SPI clock selection + * @{ + */ +#define DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL 0x00000000U /*!< External SPI clock */ +#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL DFSDM_CHCFGR1_SPICKSEL_0 /*!< Internal SPI clock */ +#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING DFSDM_CHCFGR1_SPICKSEL_1 /*!< Internal SPI clock divided by 2, falling edge */ +#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING DFSDM_CHCFGR1_SPICKSEL /*!< Internal SPI clock divided by 2, rising edge */ +/** + * @} + */ + +/** @defgroup DFSDM_Channel_AwdFilterOrder DFSDM channel analog watchdog filter order + * @{ + */ +#define DFSDM_CHANNEL_FASTSINC_ORDER 0x00000000U /*!< FastSinc filter type */ +#define DFSDM_CHANNEL_SINC1_ORDER DFSDM_CHAWSCDR_AWFORD_0 /*!< Sinc 1 filter type */ +#define DFSDM_CHANNEL_SINC2_ORDER DFSDM_CHAWSCDR_AWFORD_1 /*!< Sinc 2 filter type */ +#define DFSDM_CHANNEL_SINC3_ORDER DFSDM_CHAWSCDR_AWFORD /*!< Sinc 3 filter type */ +/** + * @} + */ + +/** @defgroup DFSDM_Filter_Trigger DFSDM filter conversion trigger + * @{ + */ +#define DFSDM_FILTER_SW_TRIGGER 0x00000000U /*!< Software trigger */ +#define DFSDM_FILTER_SYNC_TRIGGER 0x00000001U /*!< Synchronous with DFSDM_FLT0 */ +#define DFSDM_FILTER_EXT_TRIGGER 0x00000002U /*!< External trigger (only for injected conversion) */ +/** + * @} + */ + +/** @defgroup DFSDM_Filter_ExtTrigger DFSDM filter external trigger + * @{ + */ +#define DFSDM_FILTER_EXT_TRIG_TIM1_TRGO 0x00000000U /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_TIM1_TRGO2 DFSDM_FLTCR1_JEXTSEL_0 /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_TIM8_TRGO DFSDM_FLTCR1_JEXTSEL_1 /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_TIM8_TRGO2 (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_TIM3_TRGO DFSDM_FLTCR1_JEXTSEL_2 /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_TIM4_TRGO (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_TIM16_OC1 (DFSDM_FLTCR1_JEXTSEL_2 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_TIM6_TRGO (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_2 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_TIM7_TRGO DFSDM_FLTCR1_JEXTSEL_3 /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_HRTIM1_ADCTRG1 (DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_0) +#define DFSDM_FILTER_EXT_TRIG_HRTIM1_ADCTRG3 (DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_1) +#define DFSDM_FILTER_EXT_TRIG_EXTI11 (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3) /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_EXTI15 (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_0) /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_1 | DFSDM_FLTCR1_JEXTSEL_0) /*!< For all DFSDM filters */ +#define DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For all DFSDM filters */ +#if (STM32H7_DEV_ID == 0x480UL) +#define DFSDM_FILTER_EXT_TRIG_COMP1_OUT (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | \ + DFSDM_FLTCR1_JEXTSEL_2 | DFSDM_FLTCR1_JEXTSEL_0) +#define DFSDM_FILTER_EXT_TRIG_COMP2_OUT (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | \ + DFSDM_FLTCR1_JEXTSEL_2 | DFSDM_FLTCR1_JEXTSEL_1) +#elif (STM32H7_DEV_ID == 0x483UL) +#define DFSDM_FILTER_EXT_TRIG_TIM23_TRGO (DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_1 | \ + DFSDM_FLTCR1_JEXTSEL_0) +#define DFSDM_FILTER_EXT_TRIG_TIM24_TRGO (DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_2 ) +#endif /* STM32H7_DEV_ID == 0x480UL */ +/** + * @} + */ + +/** @defgroup DFSDM_Filter_ExtTriggerEdge DFSDM filter external trigger edge + * @{ + */ +#define DFSDM_FILTER_EXT_TRIG_RISING_EDGE DFSDM_FLTCR1_JEXTEN_0 /*!< External rising edge */ +#define DFSDM_FILTER_EXT_TRIG_FALLING_EDGE DFSDM_FLTCR1_JEXTEN_1 /*!< External falling edge */ +#define DFSDM_FILTER_EXT_TRIG_BOTH_EDGES DFSDM_FLTCR1_JEXTEN /*!< External rising and falling edges */ +/** + * @} + */ + +/** @defgroup DFSDM_Filter_SincOrder DFSDM filter sinc order + * @{ + */ +#define DFSDM_FILTER_FASTSINC_ORDER 0x00000000U /*!< FastSinc filter type */ +#define DFSDM_FILTER_SINC1_ORDER DFSDM_FLTFCR_FORD_0 /*!< Sinc 1 filter type */ +#define DFSDM_FILTER_SINC2_ORDER DFSDM_FLTFCR_FORD_1 /*!< Sinc 2 filter type */ +#define DFSDM_FILTER_SINC3_ORDER (DFSDM_FLTFCR_FORD_0 | DFSDM_FLTFCR_FORD_1) /*!< Sinc 3 filter type */ +#define DFSDM_FILTER_SINC4_ORDER DFSDM_FLTFCR_FORD_2 /*!< Sinc 4 filter type */ +#define DFSDM_FILTER_SINC5_ORDER (DFSDM_FLTFCR_FORD_0 | DFSDM_FLTFCR_FORD_2) /*!< Sinc 5 filter type */ +/** + * @} + */ + +/** @defgroup DFSDM_Filter_AwdDataSource DFSDM filter analog watchdog data source + * @{ + */ +#define DFSDM_FILTER_AWD_FILTER_DATA 0x00000000U /*!< From digital filter */ +#define DFSDM_FILTER_AWD_CHANNEL_DATA DFSDM_FLTCR1_AWFSEL /*!< From analog watchdog channel */ +/** + * @} + */ + +/** @defgroup DFSDM_Filter_ErrorCode DFSDM filter error code + * @{ + */ +#define DFSDM_FILTER_ERROR_NONE 0x00000000U /*!< No error */ +#define DFSDM_FILTER_ERROR_REGULAR_OVERRUN 0x00000001U /*!< Overrun occurs during regular conversion */ +#define DFSDM_FILTER_ERROR_INJECTED_OVERRUN 0x00000002U /*!< Overrun occurs during injected conversion */ +#define DFSDM_FILTER_ERROR_DMA 0x00000003U /*!< DMA error occurs */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +#define DFSDM_FILTER_ERROR_INVALID_CALLBACK 0x00000004U /*!< Invalid callback error occurs */ +#endif +/** + * @} + */ + +/** @defgroup DFSDM_BreakSignals DFSDM break signals + * @{ + */ +#define DFSDM_NO_BREAK_SIGNAL 0x00000000U /*!< No break signal */ +#define DFSDM_BREAK_SIGNAL_0 0x00000001U /*!< Break signal 0 */ +#define DFSDM_BREAK_SIGNAL_1 0x00000002U /*!< Break signal 1 */ +#define DFSDM_BREAK_SIGNAL_2 0x00000004U /*!< Break signal 2 */ +#define DFSDM_BREAK_SIGNAL_3 0x00000008U /*!< Break signal 3 */ +/** + * @} + */ + +/** @defgroup DFSDM_Channel_Selection DFSDM Channel Selection + * @{ + */ +/* DFSDM Channels ------------------------------------------------------------*/ +/* The DFSDM channels are defined as follows: + - in 16-bit LSB the channel mask is set + - in 16-bit MSB the channel number is set + e.g. for channel 5 definition: + - the channel mask is 0x00000020 (bit 5 is set) + - the channel number 5 is 0x00050000 + --> Consequently, channel 5 definition is 0x00000020 | 0x00050000 = 0x00050020 */ +#define DFSDM_CHANNEL_0 0x00000001U +#define DFSDM_CHANNEL_1 0x00010002U +#define DFSDM_CHANNEL_2 0x00020004U +#define DFSDM_CHANNEL_3 0x00030008U +#define DFSDM_CHANNEL_4 0x00040010U +#define DFSDM_CHANNEL_5 0x00050020U +#define DFSDM_CHANNEL_6 0x00060040U +#define DFSDM_CHANNEL_7 0x00070080U +/** + * @} + */ + +/** @defgroup DFSDM_ContinuousMode DFSDM Continuous Mode + * @{ + */ +#define DFSDM_CONTINUOUS_CONV_OFF 0x00000000U /*!< Conversion are not continuous */ +#define DFSDM_CONTINUOUS_CONV_ON 0x00000001U /*!< Conversion are continuous */ +/** + * @} + */ + +/** @defgroup DFSDM_AwdThreshold DFSDM analog watchdog threshold + * @{ + */ +#define DFSDM_AWD_HIGH_THRESHOLD 0x00000000U /*!< Analog watchdog high threshold */ +#define DFSDM_AWD_LOW_THRESHOLD 0x00000001U /*!< Analog watchdog low threshold */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DFSDM_Exported_Macros DFSDM Exported Macros + * @{ + */ + +/** @brief Reset DFSDM channel handle state. + * @param __HANDLE__ DFSDM channel handle. + * @retval None + */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +#define __HAL_DFSDM_CHANNEL_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_DFSDM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_DFSDM_CHANNEL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DFSDM_CHANNEL_STATE_RESET) +#endif + +/** @brief Reset DFSDM filter handle state. + * @param __HANDLE__ DFSDM filter handle. + * @retval None + */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +#define __HAL_DFSDM_FILTER_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_DFSDM_FILTER_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_DFSDM_FILTER_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DFSDM_FILTER_STATE_RESET) +#endif + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +#if defined(DFSDM_CHDLYR_PLSSKP) +/* Include DFSDM HAL Extension module */ +#include "stm32h7xx_hal_dfsdm_ex.h" +#endif /* DFSDM_CHDLYR_PLSSKP */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DFSDM_Exported_Functions DFSDM Exported Functions + * @{ + */ + +/** @addtogroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions + * @{ + */ +/* Channel initialization and de-initialization functions *********************/ +HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); + +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +/* Channel callbacks register/unregister functions ****************************/ +HAL_StatusTypeDef HAL_DFSDM_Channel_RegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID, + pDFSDM_Channel_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DFSDM_Channel_UnRegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID); +#endif +/** + * @} + */ + +/** @addtogroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions + * @{ + */ +/* Channel operation functions ************************************************/ +HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); + +HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal); +HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal); +HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); + +int16_t HAL_DFSDM_ChannelGetAwdValue(const DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, int32_t Offset); + +HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(const DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout); +HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(const DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout); + +void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +/** + * @} + */ + +/** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function + * @{ + */ +/* Channel state function *****************************************************/ +HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(const DFSDM_Channel_HandleTypeDef *hdfsdm_channel); +/** + * @} + */ + +/** @addtogroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions + * @{ + */ +/* Filter initialization and de-initialization functions *********************/ +HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); + +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +/* Filter callbacks register/unregister functions ****************************/ +HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID, + pDFSDM_Filter_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID); +HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + pDFSDM_Filter_AwdCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +#endif +/** + * @} + */ + +/** @addtogroup DFSDM_Exported_Functions_Group2_Filter Filter control functions + * @{ + */ +/* Filter control functions *********************/ +HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Channel, + uint32_t ContinuousMode); +HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Channel); +/** + * @} + */ + +/** @addtogroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions + * @{ + */ +/* Filter operation functions *********************/ +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + const DFSDM_Filter_AwdParamTypeDef *awdParam); +HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel); +HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); + +int32_t HAL_DFSDM_FilterGetRegularValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel); +int32_t HAL_DFSDM_FilterGetInjectedValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel); +int32_t HAL_DFSDM_FilterGetExdMaxValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel); +int32_t HAL_DFSDM_FilterGetExdMinValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel); +uint32_t HAL_DFSDM_FilterGetConvTimeValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter); + +void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); + +HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout); +HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout); + +void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t Threshold); +void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +/** + * @} + */ + +/** @defgroup DFSDM_Exported_Functions_Group4_Filter Filter state functions + * @{ + */ +/* Filter state functions *****************************************************/ +HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +uint32_t HAL_DFSDM_FilterGetError(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DFSDM_Private_Macros DFSDM Private Macros +* @{ +*/ +#define IS_DFSDM_CHANNEL_OUTPUT_CLOCK(CLOCK) (((CLOCK) == DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM) || \ + ((CLOCK) == DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO)) +#define IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(DIVIDER) ((2U <= (DIVIDER)) && ((DIVIDER) <= 256U)) +#define IS_DFSDM_CHANNEL_INPUT(INPUT) (((INPUT) == DFSDM_CHANNEL_EXTERNAL_INPUTS) || \ + ((INPUT) == DFSDM_CHANNEL_ADC_OUTPUT) || \ + ((INPUT) == DFSDM_CHANNEL_INTERNAL_REGISTER)) +#define IS_DFSDM_CHANNEL_DATA_PACKING(MODE) (((MODE) == DFSDM_CHANNEL_STANDARD_MODE) || \ + ((MODE) == DFSDM_CHANNEL_INTERLEAVED_MODE) || \ + ((MODE) == DFSDM_CHANNEL_DUAL_MODE)) +#define IS_DFSDM_CHANNEL_INPUT_PINS(PINS) (((PINS) == DFSDM_CHANNEL_SAME_CHANNEL_PINS) || \ + ((PINS) == DFSDM_CHANNEL_FOLLOWING_CHANNEL_PINS)) +#define IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(MODE) (((MODE) == DFSDM_CHANNEL_SPI_RISING) || \ + ((MODE) == DFSDM_CHANNEL_SPI_FALLING) || \ + ((MODE) == DFSDM_CHANNEL_MANCHESTER_RISING) || \ + ((MODE) == DFSDM_CHANNEL_MANCHESTER_FALLING)) +#define IS_DFSDM_CHANNEL_SPI_CLOCK(TYPE) (((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL) || \ + ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL) || \ + ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING) || \ + ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING)) +#define IS_DFSDM_CHANNEL_FILTER_ORDER(ORDER) (((ORDER) == DFSDM_CHANNEL_FASTSINC_ORDER) || \ + ((ORDER) == DFSDM_CHANNEL_SINC1_ORDER) || \ + ((ORDER) == DFSDM_CHANNEL_SINC2_ORDER) || \ + ((ORDER) == DFSDM_CHANNEL_SINC3_ORDER)) +#define IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 32U)) +#define IS_DFSDM_CHANNEL_OFFSET(VALUE) ((-8388608 <= (VALUE)) && ((VALUE) <= 8388607)) +#define IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(VALUE) ((VALUE) <= 0x1FU) +#define IS_DFSDM_CHANNEL_SCD_THRESHOLD(VALUE) ((VALUE) <= 0xFFU) +#define IS_DFSDM_FILTER_REG_TRIGGER(TRIG) (((TRIG) == DFSDM_FILTER_SW_TRIGGER) || \ + ((TRIG) == DFSDM_FILTER_SYNC_TRIGGER)) +#define IS_DFSDM_FILTER_INJ_TRIGGER(TRIG) (((TRIG) == DFSDM_FILTER_SW_TRIGGER) || \ + ((TRIG) == DFSDM_FILTER_SYNC_TRIGGER) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIGGER)) +#if (STM32H7_DEV_ID == 0x480UL) +#define IS_DFSDM_FILTER_EXT_TRIG(TRIG) (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO2) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO2) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM16_OC1) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM7_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_COMP1_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_COMP2_OUT)) +#elif (STM32H7_DEV_ID == 0x483UL) +#define IS_DFSDM_FILTER_EXT_TRIG(TRIG) (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO2) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO2) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM16_OC1) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM7_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM23_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM24_TRGO)) + +#else +#define IS_DFSDM_FILTER_EXT_TRIG(TRIG) (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO2) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO2) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM16_OC1) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM7_TRGO) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_HRTIM1_ADCTRG1) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_HRTIM1_ADCTRG3) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT) || \ + ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT)) +#endif /* STM32H7_DEV_ID == 0x480UL */ +#define IS_DFSDM_FILTER_EXT_TRIG_EDGE(EDGE) (((EDGE) == DFSDM_FILTER_EXT_TRIG_RISING_EDGE) || \ + ((EDGE) == DFSDM_FILTER_EXT_TRIG_FALLING_EDGE) || \ + ((EDGE) == DFSDM_FILTER_EXT_TRIG_BOTH_EDGES)) +#define IS_DFSDM_FILTER_SINC_ORDER(ORDER) (((ORDER) == DFSDM_FILTER_FASTSINC_ORDER) || \ + ((ORDER) == DFSDM_FILTER_SINC1_ORDER) || \ + ((ORDER) == DFSDM_FILTER_SINC2_ORDER) || \ + ((ORDER) == DFSDM_FILTER_SINC3_ORDER) || \ + ((ORDER) == DFSDM_FILTER_SINC4_ORDER) || \ + ((ORDER) == DFSDM_FILTER_SINC5_ORDER)) +#define IS_DFSDM_FILTER_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 1024U)) +#define IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(RATIO) ((1U <= (RATIO)) && ((RATIO) <= 256U)) +#define IS_DFSDM_FILTER_AWD_DATA_SOURCE(DATA) (((DATA) == DFSDM_FILTER_AWD_FILTER_DATA) || \ + ((DATA) == DFSDM_FILTER_AWD_CHANNEL_DATA)) +#define IS_DFSDM_FILTER_AWD_THRESHOLD(VALUE) ((-8388608 <= (VALUE)) && ((VALUE) <= 8388607)) +#define IS_DFSDM_BREAK_SIGNALS(VALUE) ((VALUE) <= 0xFU) +#define IS_DFSDM_REGULAR_CHANNEL(CHANNEL) (((CHANNEL) == DFSDM_CHANNEL_0) || \ + ((CHANNEL) == DFSDM_CHANNEL_1) || \ + ((CHANNEL) == DFSDM_CHANNEL_2) || \ + ((CHANNEL) == DFSDM_CHANNEL_3) || \ + ((CHANNEL) == DFSDM_CHANNEL_4) || \ + ((CHANNEL) == DFSDM_CHANNEL_5) || \ + ((CHANNEL) == DFSDM_CHANNEL_6) || \ + ((CHANNEL) == DFSDM_CHANNEL_7)) +#define IS_DFSDM_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) != 0U) && ((CHANNEL) <= 0x000F00FFU)) +#define IS_DFSDM_CONTINUOUS_MODE(MODE) (((MODE) == DFSDM_CONTINUOUS_CONV_OFF) || \ + ((MODE) == DFSDM_CONTINUOUS_CONV_ON)) +#if defined(DFSDM2_Channel0) +#define IS_DFSDM1_CHANNEL_INSTANCE(INSTANCE) (((INSTANCE) == DFSDM1_Channel0) || \ + ((INSTANCE) == DFSDM1_Channel1) || \ + ((INSTANCE) == DFSDM1_Channel2) || \ + ((INSTANCE) == DFSDM1_Channel3) || \ + ((INSTANCE) == DFSDM1_Channel4) || \ + ((INSTANCE) == DFSDM1_Channel5) || \ + ((INSTANCE) == DFSDM1_Channel6) || \ + ((INSTANCE) == DFSDM1_Channel7)) +#define IS_DFSDM1_FILTER_INSTANCE(INSTANCE) (((INSTANCE) == DFSDM1_Filter0) || \ + ((INSTANCE) == DFSDM1_Filter1) || \ + ((INSTANCE) == DFSDM1_Filter2) || \ + ((INSTANCE) == DFSDM1_Filter3) || \ + ((INSTANCE) == DFSDM1_Filter4) || \ + ((INSTANCE) == DFSDM1_Filter5) || \ + ((INSTANCE) == DFSDM1_Filter6) || \ + ((INSTANCE) == DFSDM1_Filter7)) +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DFSDM_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h new file mode 100644 index 0000000..82f6f21 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h @@ -0,0 +1,1333 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DMA_H +#define STM32H7xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @brief DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified stream. + This parameter can be a value of @ref DMA_Request_selection */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Stream */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx. + This parameter can be a value of @ref DMA_Priority_level */ + + uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. + This parameter can be a value of @ref DMA_FIFO_direct_mode + @note The Direct mode (FIFO mode disabled) cannot be used if the + memory-to-memory data transfer is configured on the selected stream */ + + uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. + This parameter can be a value of @ref DMA_FIFO_threshold_level */ + + uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_Memory_burst + @note The burst mode is possible only if the address Increment mode is enabled. */ + + uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_Peripheral_burst + @note The burst mode is possible only if the address Increment mode is enabled. */ +}DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_ERROR = 0x03U, /*!< DMA error state */ + HAL_DMA_STATE_ABORT = 0x04U, /*!< DMA Abort state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Transfer complete level structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U, /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callbacks IDs structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */ + HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */ + HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */ +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + void *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */ + + void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */ + + uint32_t StreamIndex; /*!< DMA Stream Index */ + + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< DMAMUX Channel Base Address */ + + DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ + + uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ + + + DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ + + DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Status Address */ + + uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ + +}DMA_HandleTypeDef; + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @brief DMA Exported constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @brief DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */ +#define HAL_DMA_ERROR_FE (0x00000002U) /*!< FIFO error */ +#define HAL_DMA_ERROR_DME (0x00000004U) /*!< Direct Mode error */ +#define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_DMA_ERROR_PARAM (0x00000040U) /*!< Parameter error */ +#define HAL_DMA_ERROR_NO_XFER (0x00000080U) /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */ +#define HAL_DMA_ERROR_SYNC (0x00000200U) /*!< DMAMUX sync overrun error */ +#define HAL_DMA_ERROR_REQGEN (0x00000400U) /*!< DMAMUX request generator overrun error */ +#define HAL_DMA_ERROR_BUSY (0x00000800U) /*!< DMA Busy error */ + +/** + * @} + */ + +/** @defgroup DMA_Request_selection DMA Request selection + * @brief DMA Request selection + * @{ + */ +/* DMAMUX1 requests */ +#define DMA_REQUEST_MEM2MEM 0U /*!< memory to memory transfer */ + +#define DMA_REQUEST_GENERATOR0 1U /*!< DMAMUX1 request generator 0 */ +#define DMA_REQUEST_GENERATOR1 2U /*!< DMAMUX1 request generator 1 */ +#define DMA_REQUEST_GENERATOR2 3U /*!< DMAMUX1 request generator 2 */ +#define DMA_REQUEST_GENERATOR3 4U /*!< DMAMUX1 request generator 3 */ +#define DMA_REQUEST_GENERATOR4 5U /*!< DMAMUX1 request generator 4 */ +#define DMA_REQUEST_GENERATOR5 6U /*!< DMAMUX1 request generator 5 */ +#define DMA_REQUEST_GENERATOR6 7U /*!< DMAMUX1 request generator 6 */ +#define DMA_REQUEST_GENERATOR7 8U /*!< DMAMUX1 request generator 7 */ + +#define DMA_REQUEST_ADC1 9U /*!< DMAMUX1 ADC1 request */ +#define DMA_REQUEST_ADC2 10U /*!< DMAMUX1 ADC2 request */ + +#define DMA_REQUEST_TIM1_CH1 11U /*!< DMAMUX1 TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 12U /*!< DMAMUX1 TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 13U /*!< DMAMUX1 TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 14U /*!< DMAMUX1 TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_UP 15U /*!< DMAMUX1 TIM1 UP request */ +#define DMA_REQUEST_TIM1_TRIG 16U /*!< DMAMUX1 TIM1 TRIG request */ +#define DMA_REQUEST_TIM1_COM 17U /*!< DMAMUX1 TIM1 COM request */ + +#define DMA_REQUEST_TIM2_CH1 18U /*!< DMAMUX1 TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 19U /*!< DMAMUX1 TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 20U /*!< DMAMUX1 TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 21U /*!< DMAMUX1 TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_UP 22U /*!< DMAMUX1 TIM2 UP request */ + +#define DMA_REQUEST_TIM3_CH1 23U /*!< DMAMUX1 TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 24U /*!< DMAMUX1 TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 25U /*!< DMAMUX1 TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 26U /*!< DMAMUX1 TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_UP 27U /*!< DMAMUX1 TIM3 UP request */ +#define DMA_REQUEST_TIM3_TRIG 28U /*!< DMAMUX1 TIM3 TRIG request */ + +#define DMA_REQUEST_TIM4_CH1 29U /*!< DMAMUX1 TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 30U /*!< DMAMUX1 TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 31U /*!< DMAMUX1 TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_UP 32U /*!< DMAMUX1 TIM4 UP request */ + +#define DMA_REQUEST_I2C1_RX 33U /*!< DMAMUX1 I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX 34U /*!< DMAMUX1 I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX 35U /*!< DMAMUX1 I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX 36U /*!< DMAMUX1 I2C2 TX request */ + +#define DMA_REQUEST_SPI1_RX 37U /*!< DMAMUX1 SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX 38U /*!< DMAMUX1 SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX 39U /*!< DMAMUX1 SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX 40U /*!< DMAMUX1 SPI2 TX request */ + +#define DMA_REQUEST_USART1_RX 41U /*!< DMAMUX1 USART1 RX request */ +#define DMA_REQUEST_USART1_TX 42U /*!< DMAMUX1 USART1 TX request */ +#define DMA_REQUEST_USART2_RX 43U /*!< DMAMUX1 USART2 RX request */ +#define DMA_REQUEST_USART2_TX 44U /*!< DMAMUX1 USART2 TX request */ +#define DMA_REQUEST_USART3_RX 45U /*!< DMAMUX1 USART3 RX request */ +#define DMA_REQUEST_USART3_TX 46U /*!< DMAMUX1 USART3 TX request */ + +#define DMA_REQUEST_TIM8_CH1 47U /*!< DMAMUX1 TIM8 CH1 request */ +#define DMA_REQUEST_TIM8_CH2 48U /*!< DMAMUX1 TIM8 CH2 request */ +#define DMA_REQUEST_TIM8_CH3 49U /*!< DMAMUX1 TIM8 CH3 request */ +#define DMA_REQUEST_TIM8_CH4 50U /*!< DMAMUX1 TIM8 CH4 request */ +#define DMA_REQUEST_TIM8_UP 51U /*!< DMAMUX1 TIM8 UP request */ +#define DMA_REQUEST_TIM8_TRIG 52U /*!< DMAMUX1 TIM8 TRIG request */ +#define DMA_REQUEST_TIM8_COM 53U /*!< DMAMUX1 TIM8 COM request */ + +#define DMA_REQUEST_TIM5_CH1 55U /*!< DMAMUX1 TIM5 CH1 request */ +#define DMA_REQUEST_TIM5_CH2 56U /*!< DMAMUX1 TIM5 CH2 request */ +#define DMA_REQUEST_TIM5_CH3 57U /*!< DMAMUX1 TIM5 CH3 request */ +#define DMA_REQUEST_TIM5_CH4 58U /*!< DMAMUX1 TIM5 CH4 request */ +#define DMA_REQUEST_TIM5_UP 59U /*!< DMAMUX1 TIM5 UP request */ +#define DMA_REQUEST_TIM5_TRIG 60U /*!< DMAMUX1 TIM5 TRIG request */ + +#define DMA_REQUEST_SPI3_RX 61U /*!< DMAMUX1 SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX 62U /*!< DMAMUX1 SPI3 TX request */ + +#define DMA_REQUEST_UART4_RX 63U /*!< DMAMUX1 UART4 RX request */ +#define DMA_REQUEST_UART4_TX 64U /*!< DMAMUX1 UART4 TX request */ +#define DMA_REQUEST_UART5_RX 65U /*!< DMAMUX1 UART5 RX request */ +#define DMA_REQUEST_UART5_TX 66U /*!< DMAMUX1 UART5 TX request */ + +#define DMA_REQUEST_DAC1_CH1 67U /*!< DMAMUX1 DAC1 Channel 1 request */ +#define DMA_REQUEST_DAC1_CH2 68U /*!< DMAMUX1 DAC1 Channel 2 request */ + +#define DMA_REQUEST_TIM6_UP 69U /*!< DMAMUX1 TIM6 UP request */ +#define DMA_REQUEST_TIM7_UP 70U /*!< DMAMUX1 TIM7 UP request */ + +#define DMA_REQUEST_USART6_RX 71U /*!< DMAMUX1 USART6 RX request */ +#define DMA_REQUEST_USART6_TX 72U /*!< DMAMUX1 USART6 TX request */ + +#define DMA_REQUEST_I2C3_RX 73U /*!< DMAMUX1 I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX 74U /*!< DMAMUX1 I2C3 TX request */ + +#if defined (PSSI) +#define DMA_REQUEST_DCMI_PSSI 75U /*!< DMAMUX1 DCMI/PSSI request */ +#define DMA_REQUEST_DCMI DMA_REQUEST_DCMI_PSSI /* Legacy define */ +#else +#define DMA_REQUEST_DCMI 75U /*!< DMAMUX1 DCMI request */ +#endif /* PSSI */ + +#define DMA_REQUEST_CRYP_IN 76U /*!< DMAMUX1 CRYP IN request */ +#define DMA_REQUEST_CRYP_OUT 77U /*!< DMAMUX1 CRYP OUT request */ + +#define DMA_REQUEST_HASH_IN 78U /*!< DMAMUX1 HASH IN request */ + +#define DMA_REQUEST_UART7_RX 79U /*!< DMAMUX1 UART7 RX request */ +#define DMA_REQUEST_UART7_TX 80U /*!< DMAMUX1 UART7 TX request */ +#define DMA_REQUEST_UART8_RX 81U /*!< DMAMUX1 UART8 RX request */ +#define DMA_REQUEST_UART8_TX 82U /*!< DMAMUX1 UART8 TX request */ + +#define DMA_REQUEST_SPI4_RX 83U /*!< DMAMUX1 SPI4 RX request */ +#define DMA_REQUEST_SPI4_TX 84U /*!< DMAMUX1 SPI4 TX request */ +#define DMA_REQUEST_SPI5_RX 85U /*!< DMAMUX1 SPI5 RX request */ +#define DMA_REQUEST_SPI5_TX 86U /*!< DMAMUX1 SPI5 TX request */ + +#define DMA_REQUEST_SAI1_A 87U /*!< DMAMUX1 SAI1 A request */ +#define DMA_REQUEST_SAI1_B 88U /*!< DMAMUX1 SAI1 B request */ + +#if defined(SAI2) +#define DMA_REQUEST_SAI2_A 89U /*!< DMAMUX1 SAI2 A request */ +#define DMA_REQUEST_SAI2_B 90U /*!< DMAMUX1 SAI2 B request */ +#endif /* SAI2 */ + +#define DMA_REQUEST_SWPMI_RX 91U /*!< DMAMUX1 SWPMI RX request */ +#define DMA_REQUEST_SWPMI_TX 92U /*!< DMAMUX1 SWPMI TX request */ + +#define DMA_REQUEST_SPDIF_RX_DT 93U /*!< DMAMUX1 SPDIF RXDT request*/ +#define DMA_REQUEST_SPDIF_RX_CS 94U /*!< DMAMUX1 SPDIF RXCS request*/ + +#if defined(HRTIM1) +#define DMA_REQUEST_HRTIM_MASTER 95U /*!< DMAMUX1 HRTIM1 Master request 1 */ +#define DMA_REQUEST_HRTIM_TIMER_A 96U /*!< DMAMUX1 HRTIM1 Timer A request 2 */ +#define DMA_REQUEST_HRTIM_TIMER_B 97U /*!< DMAMUX1 HRTIM1 Timer B request 3 */ +#define DMA_REQUEST_HRTIM_TIMER_C 98U /*!< DMAMUX1 HRTIM1 Timer C request 4 */ +#define DMA_REQUEST_HRTIM_TIMER_D 99U /*!< DMAMUX1 HRTIM1 Timer D request 5 */ +#define DMA_REQUEST_HRTIM_TIMER_E 100U /*!< DMAMUX1 HRTIM1 Timer E request 6*/ +#endif /* HRTIM1 */ + +#define DMA_REQUEST_DFSDM1_FLT0 101U /*!< DMAMUX1 DFSDM Filter0 request */ +#define DMA_REQUEST_DFSDM1_FLT1 102U /*!< DMAMUX1 DFSDM Filter1 request */ +#define DMA_REQUEST_DFSDM1_FLT2 103U /*!< DMAMUX1 DFSDM Filter2 request */ +#define DMA_REQUEST_DFSDM1_FLT3 104U /*!< DMAMUX1 DFSDM Filter3 request */ + +#define DMA_REQUEST_TIM15_CH1 105U /*!< DMAMUX1 TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_UP 106U /*!< DMAMUX1 TIM15 UP request */ +#define DMA_REQUEST_TIM15_TRIG 107U /*!< DMAMUX1 TIM15 TRIG request */ +#define DMA_REQUEST_TIM15_COM 108U /*!< DMAMUX1 TIM15 COM request */ + +#define DMA_REQUEST_TIM16_CH1 109U /*!< DMAMUX1 TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_UP 110U /*!< DMAMUX1 TIM16 UP request */ + +#define DMA_REQUEST_TIM17_CH1 111U /*!< DMAMUX1 TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_UP 112U /*!< DMAMUX1 TIM17 UP request */ + +#if defined(SAI3) +#define DMA_REQUEST_SAI3_A 113U /*!< DMAMUX1 SAI3 A request */ +#define DMA_REQUEST_SAI3_B 114U /*!< DMAMUX1 SAI3 B request */ +#endif /* SAI3 */ + +#if defined(ADC3) +#define DMA_REQUEST_ADC3 115U /*!< DMAMUX1 ADC3 request */ +#endif /* ADC3 */ + +#if defined(UART9) +#define DMA_REQUEST_UART9_RX 116U /*!< DMAMUX1 UART9 request */ +#define DMA_REQUEST_UART9_TX 117U /*!< DMAMUX1 UART9 request */ +#endif /* UART9 */ + +#if defined(USART10) +#define DMA_REQUEST_USART10_RX 118U /*!< DMAMUX1 USART10 request */ +#define DMA_REQUEST_USART10_TX 119U /*!< DMAMUX1 USART10 request */ +#endif /* USART10 */ + +#if defined(FMAC) +#define DMA_REQUEST_FMAC_READ 120U /*!< DMAMUX1 FMAC Read request */ +#define DMA_REQUEST_FMAC_WRITE 121U /*!< DMAMUX1 FMAC Write request */ +#endif /* FMAC */ + +#if defined(CORDIC) +#define DMA_REQUEST_CORDIC_READ 122U /*!< DMAMUX1 CORDIC Read request */ +#define DMA_REQUEST_CORDIC_WRITE 123U /*!< DMAMUX1 CORDIC Write request */ +#endif /* CORDIC */ + +#if defined(I2C5) +#define DMA_REQUEST_I2C5_RX 124U /*!< DMAMUX1 I2C5 RX request */ +#define DMA_REQUEST_I2C5_TX 125U /*!< DMAMUX1 I2C5 TX request */ +#endif /* I2C5 */ + +#if defined(TIM23) +#define DMA_REQUEST_TIM23_CH1 126U /*!< DMAMUX1 TIM23 CH1 request */ +#define DMA_REQUEST_TIM23_CH2 127U /*!< DMAMUX1 TIM23 CH2 request */ +#define DMA_REQUEST_TIM23_CH3 128U /*!< DMAMUX1 TIM23 CH3 request */ +#define DMA_REQUEST_TIM23_CH4 129U /*!< DMAMUX1 TIM23 CH4 request */ +#define DMA_REQUEST_TIM23_UP 130U /*!< DMAMUX1 TIM23 UP request */ +#define DMA_REQUEST_TIM23_TRIG 131U /*!< DMAMUX1 TIM23 TRIG request */ +#endif /* TIM23 */ + +#if defined(TIM24) +#define DMA_REQUEST_TIM24_CH1 132U /*!< DMAMUX1 TIM24 CH1 request */ +#define DMA_REQUEST_TIM24_CH2 133U /*!< DMAMUX1 TIM24 CH2 request */ +#define DMA_REQUEST_TIM24_CH3 134U /*!< DMAMUX1 TIM24 CH3 request */ +#define DMA_REQUEST_TIM24_CH4 135U /*!< DMAMUX1 TIM24 CH4 request */ +#define DMA_REQUEST_TIM24_UP 136U /*!< DMAMUX1 TIM24 UP request */ +#define DMA_REQUEST_TIM24_TRIG 137U /*!< DMAMUX1 TIM24 TRIG request */ +#endif /* TIM24 */ + +/* DMAMUX2 requests */ +#define BDMA_REQUEST_MEM2MEM 0U /*!< memory to memory transfer */ +#define BDMA_REQUEST_GENERATOR0 1U /*!< DMAMUX2 request generator 0 */ +#define BDMA_REQUEST_GENERATOR1 2U /*!< DMAMUX2 request generator 1 */ +#define BDMA_REQUEST_GENERATOR2 3U /*!< DMAMUX2 request generator 2 */ +#define BDMA_REQUEST_GENERATOR3 4U /*!< DMAMUX2 request generator 3 */ +#define BDMA_REQUEST_GENERATOR4 5U /*!< DMAMUX2 request generator 4 */ +#define BDMA_REQUEST_GENERATOR5 6U /*!< DMAMUX2 request generator 5 */ +#define BDMA_REQUEST_GENERATOR6 7U /*!< DMAMUX2 request generator 6 */ +#define BDMA_REQUEST_GENERATOR7 8U /*!< DMAMUX2 request generator 7 */ +#define BDMA_REQUEST_LPUART1_RX 9U /*!< DMAMUX2 LP_UART1_RX request */ +#define BDMA_REQUEST_LPUART1_TX 10U /*!< DMAMUX2 LP_UART1_TX request */ +#define BDMA_REQUEST_SPI6_RX 11U /*!< DMAMUX2 SPI6 RX request */ +#define BDMA_REQUEST_SPI6_TX 12U /*!< DMAMUX2 SPI6 TX request */ +#define BDMA_REQUEST_I2C4_RX 13U /*!< DMAMUX2 I2C4 RX request */ +#define BDMA_REQUEST_I2C4_TX 14U /*!< DMAMUX2 I2C4 TX request */ +#if defined(SAI4) +#define BDMA_REQUEST_SAI4_A 15U /*!< DMAMUX2 SAI4 A request */ +#define BDMA_REQUEST_SAI4_B 16U /*!< DMAMUX2 SAI4 B request */ +#endif /* SAI4 */ +#if defined(ADC3) +#define BDMA_REQUEST_ADC3 17U /*!< DMAMUX2 ADC3 request */ +#endif /* ADC3 */ +#if defined(DAC2) +#define BDMA_REQUEST_DAC2_CH1 17U /*!< DMAMUX2 DAC2 CH1 request */ +#endif /* DAC2 */ +#if defined(DFSDM2_Channel0) +#define BDMA_REQUEST_DFSDM2_FLT0 18U /*!< DMAMUX2 DFSDM2 request */ +#endif /* DFSDM1_Channel0 */ + +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @brief DMA data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000U) /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @brief DMA peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */ +#define DMA_PINC_DISABLE ((uint32_t)0x00000000U) /*!< Peripheral increment mode disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @brief DMA memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */ +#define DMA_MINC_DISABLE ((uint32_t)0x00000000U) /*!< Memory increment mode disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @brief DMA peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000U) /*!< Peripheral data alignment: Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @brief DMA memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000U) /*!< Memory data alignment: Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @brief DMA mode + * @{ + */ +#define DMA_NORMAL ((uint32_t)0x00000000U) /*!< Normal mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */ +#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */ +#define DMA_DOUBLE_BUFFER_M0 ((uint32_t)DMA_SxCR_DBM) /*!< Double buffer mode with first target memory M0 */ +#define DMA_DOUBLE_BUFFER_M1 ((uint32_t)(DMA_SxCR_DBM | DMA_SxCR_CT)) /*!< Double buffer mode with first target memory M1 */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @brief DMA priority levels + * @{ + */ +#define DMA_PRIORITY_LOW ((uint32_t)0x00000000U) /*!< Priority level: Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */ +/** + * @} + */ + +/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode + * @brief DMA FIFO direct mode + * @{ + */ +#define DMA_FIFOMODE_DISABLE ((uint32_t)0x00000000U) /*!< FIFO mode disable */ +#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level + * @brief DMA FIFO level + * @{ + */ +#define DMA_FIFO_THRESHOLD_1QUARTERFULL ((uint32_t)0x00000000U) /*!< FIFO threshold 1 quart full configuration */ +#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */ +#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */ +#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */ +/** + * @} + */ + +/** @defgroup DMA_Memory_burst DMA Memory burst + * @brief DMA memory burst + * @{ + */ +#define DMA_MBURST_SINGLE ((uint32_t)0x00000000U) +#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0) +#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1) +#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST) +/** + * @} + */ + +/** @defgroup DMA_Peripheral_burst DMA Peripheral burst + * @brief DMA peripheral burst + * @{ + */ +#define DMA_PBURST_SINGLE ((uint32_t)0x00000000U) +#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0) +#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1) +#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST) +/** + * @} + */ + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @brief DMA interrupts definition + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE) +#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE) +#define DMA_IT_FE ((uint32_t)0x00000080U) +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @brief DMA flag definitions + * @{ + */ +#define DMA_FLAG_FEIF0_4 ((uint32_t)0x00000001U) +#define DMA_FLAG_DMEIF0_4 ((uint32_t)0x00000004U) +#define DMA_FLAG_TEIF0_4 ((uint32_t)0x00000008U) +#define DMA_FLAG_HTIF0_4 ((uint32_t)0x00000010U) +#define DMA_FLAG_TCIF0_4 ((uint32_t)0x00000020U) +#define DMA_FLAG_FEIF1_5 ((uint32_t)0x00000040U) +#define DMA_FLAG_DMEIF1_5 ((uint32_t)0x00000100U) +#define DMA_FLAG_TEIF1_5 ((uint32_t)0x00000200U) +#define DMA_FLAG_HTIF1_5 ((uint32_t)0x00000400U) +#define DMA_FLAG_TCIF1_5 ((uint32_t)0x00000800U) +#define DMA_FLAG_FEIF2_6 ((uint32_t)0x00010000U) +#define DMA_FLAG_DMEIF2_6 ((uint32_t)0x00040000U) +#define DMA_FLAG_TEIF2_6 ((uint32_t)0x00080000U) +#define DMA_FLAG_HTIF2_6 ((uint32_t)0x00100000U) +#define DMA_FLAG_TCIF2_6 ((uint32_t)0x00200000U) +#define DMA_FLAG_FEIF3_7 ((uint32_t)0x00400000U) +#define DMA_FLAG_DMEIF3_7 ((uint32_t)0x01000000U) +#define DMA_FLAG_TEIF3_7 ((uint32_t)0x02000000U) +#define DMA_FLAG_HTIF3_7 ((uint32_t)0x04000000U) +#define DMA_FLAG_TCIF3_7 ((uint32_t)0x08000000U) +/** + * @} + */ + +/** @defgroup BDMA_flag_definitions BDMA flag definitions + * @brief BDMA flag definitions + * @{ + */ +#define BDMA_FLAG_GL0 ((uint32_t)0x00000001) +#define BDMA_FLAG_TC0 ((uint32_t)0x00000002) +#define BDMA_FLAG_HT0 ((uint32_t)0x00000004) +#define BDMA_FLAG_TE0 ((uint32_t)0x00000008) +#define BDMA_FLAG_GL1 ((uint32_t)0x00000010) +#define BDMA_FLAG_TC1 ((uint32_t)0x00000020) +#define BDMA_FLAG_HT1 ((uint32_t)0x00000040) +#define BDMA_FLAG_TE1 ((uint32_t)0x00000080) +#define BDMA_FLAG_GL2 ((uint32_t)0x00000100) +#define BDMA_FLAG_TC2 ((uint32_t)0x00000200) +#define BDMA_FLAG_HT2 ((uint32_t)0x00000400) +#define BDMA_FLAG_TE2 ((uint32_t)0x00000800) +#define BDMA_FLAG_GL3 ((uint32_t)0x00001000) +#define BDMA_FLAG_TC3 ((uint32_t)0x00002000) +#define BDMA_FLAG_HT3 ((uint32_t)0x00004000) +#define BDMA_FLAG_TE3 ((uint32_t)0x00008000) +#define BDMA_FLAG_GL4 ((uint32_t)0x00010000) +#define BDMA_FLAG_TC4 ((uint32_t)0x00020000) +#define BDMA_FLAG_HT4 ((uint32_t)0x00040000) +#define BDMA_FLAG_TE4 ((uint32_t)0x00080000) +#define BDMA_FLAG_GL5 ((uint32_t)0x00100000) +#define BDMA_FLAG_TC5 ((uint32_t)0x00200000) +#define BDMA_FLAG_HT5 ((uint32_t)0x00400000) +#define BDMA_FLAG_TE5 ((uint32_t)0x00800000) +#define BDMA_FLAG_GL6 ((uint32_t)0x01000000) +#define BDMA_FLAG_TC6 ((uint32_t)0x02000000) +#define BDMA_FLAG_HT6 ((uint32_t)0x04000000) +#define BDMA_FLAG_TE6 ((uint32_t)0x08000000) +#define BDMA_FLAG_GL7 ((uint32_t)0x10000000) +#define BDMA_FLAG_TC7 ((uint32_t)0x20000000) +#define BDMA_FLAG_HT7 ((uint32_t)0x40000000) +#define BDMA_FLAG_TE7 ((uint32_t)0x80000000) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__: specifies the DMA handle. + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Return the current DMA Stream FIFO filled level. + * @param __HANDLE__: DMA handle + * @retval The FIFO filling state. + * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full + * and not empty. + * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. + * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. + * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. + * - DMA_FIFOStatus_Empty: when FIFO is empty + * - DMA_FIFOStatus_Full: when FIFO is full + */ +#define __HAL_DMA_GET_FS(__HANDLE__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (DMA_SxFCR_FS)) : 0) + +/** + * @brief Enable the specified DMA Stream. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) \ +((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR |= DMA_SxCR_EN) : \ +(((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR |= BDMA_CCR_EN)) + +/** + * @brief Disable the specified DMA Stream. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) \ +((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR &= ~DMA_SxCR_EN) : \ +(((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR &= ~BDMA_CCR_EN)) + +/* Interrupt & Flag management */ + +/** + * @brief Return the current DMA Stream transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ +#if defined(BDMA1) +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel0))? BDMA_FLAG_TC0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel0))? BDMA_FLAG_TC0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel1))? BDMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel1))? BDMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel2))? BDMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel2))? BDMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel3))? BDMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel3))? BDMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel4))? BDMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel4))? BDMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel5))? BDMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel5))? BDMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel6))? BDMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel6))? BDMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel7))? BDMA_FLAG_TC7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel7))? BDMA_FLAG_TC7 :\ + (uint32_t)0x00000000) +#else +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_TC0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_TC7 :\ + (uint32_t)0x00000000) +#endif /* BDMA1 */ + +/** + * @brief Return the current DMA Stream half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#if defined(BDMA1) +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel0))? BDMA_FLAG_HT0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel0))? BDMA_FLAG_HT0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel1))? BDMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel1))? BDMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel2))? BDMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel2))? BDMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel3))? BDMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel3))? BDMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel4))? BDMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel4))? BDMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel5))? BDMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel5))? BDMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel6))? BDMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel6))? BDMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel7))? BDMA_FLAG_HT7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel7))? BDMA_FLAG_HT7 :\ + (uint32_t)0x00000000) +#else +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_HT0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_HT7 :\ + (uint32_t)0x00000000) +#endif /* BDMA1 */ + +/** + * @brief Return the current DMA Stream transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(BDMA1) +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel0))? BDMA_FLAG_TE0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel0))? BDMA_FLAG_TE0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel1))? BDMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel1))? BDMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel2))? BDMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel2))? BDMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel3))? BDMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel3))? BDMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel4))? BDMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel4))? BDMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel5))? BDMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel5))? BDMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel6))? BDMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel6))? BDMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel7))? BDMA_FLAG_TE7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel7))? BDMA_FLAG_TE7 :\ + (uint32_t)0x00000000) +#else +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_TE0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_TE7 :\ + (uint32_t)0x00000000) +#endif /* BDMA1 */ + +/** + * @brief Return the current DMA Stream FIFO error flag. + * @param __HANDLE__: DMA handle + * @retval The specified FIFO error flag index. + */ +#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_FEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_FEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_FEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_FEIF3_7 :\ + (uint32_t)0x00000000) + +/** + * @brief Return the current DMA Stream direct mode error flag. + * @param __HANDLE__: DMA handle + * @retval The specified direct mode error flag index. + */ +#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_DMEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_DMEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_DMEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_DMEIF3_7 :\ + (uint32_t)0x00000000) + +/** + * @brief Returns the current BDMA Channel Global interrupt flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(BDMA1) +#define __HAL_BDMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel0))? BDMA_ISR_GIF0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel0))? BDMA_ISR_GIF0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel1))? BDMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel1))? BDMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel2))? BDMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel2))? BDMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel3))? BDMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel3))? BDMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel4))? BDMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel4))? BDMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel5))? BDMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel5))? BDMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel6))? BDMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel6))? BDMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel7))? BDMA_ISR_GIF7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel7))? BDMA_ISR_GIF7 :\ + (uint32_t)0x00000000) +#else +#define __HAL_BDMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_ISR_GIF0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_ISR_GIF7 :\ + (uint32_t)0x00000000) +#endif /* BDMA1 */ + +/** + * @brief Get the DMA Stream pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Transfer complete flag. + * @arg DMA_FLAG_HTIFx: Half transfer complete flag. + * @arg DMA_FLAG_TEIFx: Transfer error flag. + * @arg DMA_FLAG_DMEIFx: Direct mode error flag. + * @arg DMA_FLAG_FEIFx: FIFO error flag. + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. + * @retval The state of FLAG (SET or RESET). + */ +#if defined(BDMA1) +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)BDMA1_Channel7)? (BDMA2->ISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7 )? (BDMA1->ISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3 )? (DMA2->HISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7 )? (DMA2->LISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3 )? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) +#else +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7)? (BDMA->ISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) +#endif /* BDMA1 */ + +/** + * @brief Clear the DMA Stream pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Transfer complete flag. + * @arg DMA_FLAG_HTIFx: Half transfer complete flag. + * @arg DMA_FLAG_TEIFx: Transfer error flag. + * @arg DMA_FLAG_DMEIFx: Direct mode error flag. + * @arg DMA_FLAG_FEIFx: FIFO error flag. + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. + * @retval None + */ +#if defined(BDMA1) +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)BDMA1_Channel7)? (BDMA2->IFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7)? (BDMA1->IFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) +#else +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7)? (BDMA->IFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) +#endif /* BDMA1 */ + +#define DMA_TO_BDMA_IT(__DMA_IT__) \ +((((__DMA_IT__) & (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)) == (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)) ? (BDMA_CCR_TCIE | BDMA_CCR_HTIE |BDMA_CCR_TEIE) :\ + (((__DMA_IT__) & (DMA_IT_TC | DMA_IT_HT)) == (DMA_IT_TC | DMA_IT_HT)) ? (BDMA_CCR_TCIE | BDMA_CCR_HTIE) :\ + (((__DMA_IT__) & (DMA_IT_HT | DMA_IT_TE)) == (DMA_IT_HT | DMA_IT_TE)) ? (BDMA_CCR_HTIE |BDMA_CCR_TEIE) :\ + (((__DMA_IT__) & (DMA_IT_TC | DMA_IT_TE)) == (DMA_IT_TC | DMA_IT_TE)) ? (BDMA_CCR_TCIE |BDMA_CCR_TEIE) :\ + ((__DMA_IT__) == DMA_IT_TC) ? BDMA_CCR_TCIE :\ + ((__DMA_IT__) == DMA_IT_HT) ? BDMA_CCR_HTIE :\ + ((__DMA_IT__) == DMA_IT_TE) ? BDMA_CCR_TEIE :\ + (uint32_t)0x00000000) + + +#define __HAL_BDMA_CHANNEL_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ +(((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR |= (DMA_TO_BDMA_IT(__INTERRUPT__))) + +#define __HAL_DMA_STREAM_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ +(((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR |= (__INTERRUPT__)) : (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR |= (__INTERRUPT__))) + +/** + * @brief Enable the specified DMA Stream interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))?\ + (__HAL_DMA_STREAM_ENABLE_IT((__HANDLE__), (__INTERRUPT__))) :\ + (__HAL_BDMA_CHANNEL_ENABLE_IT((__HANDLE__), (__INTERRUPT__)))) + + +#define __HAL_BDMA_CHANNEL_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR &= ~(DMA_TO_BDMA_IT(__INTERRUPT__))) + +#define __HAL_DMA_STREAM_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ +(((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR &= ~(__INTERRUPT__)) : (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR &= ~(__INTERRUPT__))) + +/** + * @brief Disable the specified DMA Stream interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))?\ + (__HAL_DMA_STREAM_DISABLE_IT((__HANDLE__), (__INTERRUPT__))) :\ + (__HAL_BDMA_CHANNEL_DISABLE_IT((__HANDLE__), (__INTERRUPT__)))) + + +#define __HAL_BDMA_CHANNEL_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR & (DMA_TO_BDMA_IT(__INTERRUPT__)))) + +#define __HAL_DMA_STREAM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ + (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR & (__INTERRUPT__)) : \ + (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (__INTERRUPT__))) + +/** + * @brief Check whether the specified DMA Stream interrupt is enabled or not. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval The state of DMA_IT. + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \ + (__HAL_DMA_STREAM_GET_IT_SOURCE((__HANDLE__), (__INTERRUPT__))) :\ + (__HAL_BDMA_CHANNEL_GET_IT_SOURCE((__HANDLE__), (__INTERRUPT__)))) + +/** + * @brief Writes the number of data units to be transferred on the DMA Stream. + * @param __HANDLE__: DMA handle + * @param __COUNTER__: Number of data units to be transferred (from 0 to 65535) + * Number of data items depends only on the Peripheral data format. + * + * @note If Peripheral data format is Bytes: number of data units is equal + * to total number of bytes to be transferred. + * + * @note If Peripheral data format is Half-Word: number of data units is + * equal to total number of bytes to be transferred / 2. + * + * @note If Peripheral data format is Word: number of data units is equal + * to total number of bytes to be transferred / 4. + * + * @retval The number of remaining data units in the current DMAy Streamx transfer. + */ +#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \ + (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->NDTR = (uint16_t)(__COUNTER__)) :\ + (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CNDTR = (uint16_t)(__COUNTER__))) + +/** + * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. + * @param __HANDLE__: DMA handle + * + * @retval The number of remaining data units in the current DMA Stream transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \ + (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->NDTR) :\ + (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CNDTR)) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32h7xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @brief DMA Exported functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions + * @brief I/O operation functions + * @{ + */ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/** + * @} + */ +/* Private Constants -------------------------------------------------------------*/ +/** @defgroup DMA_Private_Constants DMA Private Constants + * @brief DMA private defines and constants + * @{ + */ +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup DMA_Private_Types DMA Private Types + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @brief DMA private macros + * @{ + */ + +#if defined(TIM24) +#define IS_DMA_REQUEST(REQUEST) (((REQUEST) <= DMA_REQUEST_TIM24_TRIG)) +#elif defined(ADC3) +#define IS_DMA_REQUEST(REQUEST) (((REQUEST) <= DMA_REQUEST_ADC3)) +#else +#define IS_DMA_REQUEST(REQUEST) (((REQUEST) <= DMA_REQUEST_USART10_TX)) +#endif /* TIM24 */ + +#if defined(ADC3) +#define IS_BDMA_REQUEST(REQUEST) (((REQUEST) <= BDMA_REQUEST_ADC3)) +#else +#define IS_BDMA_REQUEST(REQUEST) (((REQUEST) <= BDMA_REQUEST_DFSDM2_FLT0)) +#endif /* ADC3 */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR) || \ + ((MODE) == DMA_PFCTRL) || \ + ((MODE) == DMA_DOUBLE_BUFFER_M0) || \ + ((MODE) == DMA_DOUBLE_BUFFER_M1)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \ + ((STATE) == DMA_FIFOMODE_ENABLE)) + +#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL)) + +#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \ + ((BURST) == DMA_MBURST_INC4) || \ + ((BURST) == DMA_MBURST_INC8) || \ + ((BURST) == DMA_MBURST_INC16)) + +#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \ + ((BURST) == DMA_PBURST_INC4) || \ + ((BURST) == DMA_PBURST_INC8) || \ + ((BURST) == DMA_PBURST_INC16)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @brief DMA private functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DMA_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h new file mode 100644 index 0000000..cde5755 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h @@ -0,0 +1,310 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DMA_EX_H +#define STM32H7xx_HAL_DMA_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @brief DMAEx Exported types + * @{ + */ + +/** + * @brief HAL DMA Memory definition + */ +typedef enum +{ + MEMORY0 = 0x00U, /*!< Memory 0 */ + MEMORY1 = 0x01U, /*!< Memory 1 */ + +}HAL_DMA_MemoryTypeDef; + +/** + * @brief HAL DMAMUX Synchronization configuration structure definition + */ +typedef struct +{ + uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. + This parameter can be a value of @ref DMAEx_MUX_SyncSignalID_selection */ + + uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. + This parameter can be a value of @ref DMAEx_MUX_SyncPolarity_selection */ + + FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled + This parameter can take the value ENABLE or DISABLE*/ + + + FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. + This parameter can take the value ENABLE or DISABLE */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event. + This parameters can be in the range 1 to 32 */ + +}HAL_DMA_MuxSyncConfigTypeDef; + + +/** + * @brief HAL DMAMUX request generator parameters structure definition + */ +typedef struct +{ + uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator + This parameter can be a value of @ref DMAEx_MUX_SignalGeneratorID_selection */ + + uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. + This parameter can be a value of @ref DMAEx_MUX_RequestGeneneratorPolarity_selection */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event. + This parameters can be in the range 1 to 32 */ + +}HAL_DMA_MuxRequestGeneratorConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMAEx_Exported_Constants DMA Exported Constants + * @brief DMAEx Exported constants + * @{ + */ + +/** @defgroup DMAEx_MUX_SyncSignalID_selection DMAEx MUX SyncSignalID selection + * @brief DMAEx MUX SyncSignalID selection + * @{ + */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 0U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 1U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 2U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_SYNC_LPTIM1_OUT 3U /*!< DMAMUX1 synchronization Signal is LPTIM1 OUT */ +#define HAL_DMAMUX1_SYNC_LPTIM2_OUT 4U /*!< DMAMUX1 synchronization Signal is LPTIM2 OUT */ +#define HAL_DMAMUX1_SYNC_LPTIM3_OUT 5U /*!< DMAMUX1 synchronization Signal is LPTIM3 OUT */ +#define HAL_DMAMUX1_SYNC_EXTI0 6U /*!< DMAMUX1 synchronization Signal is EXTI0 IT */ +#define HAL_DMAMUX1_SYNC_TIM12_TRGO 7U /*!< DMAMUX1 synchronization Signal is TIM12 TRGO */ + +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT 0U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel0 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT 1U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel1 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT 2U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel2 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT 3U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel3 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT 4U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel4 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT 5U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel5 Event */ +#define HAL_DMAMUX2_SYNC_LPUART1_RX_WKUP 6U /*!< DMAMUX2 synchronization Signal is LPUART1 RX Wakeup */ +#define HAL_DMAMUX2_SYNC_LPUART1_TX_WKUP 7U /*!< DMAMUX2 synchronization Signal is LPUART1 TX Wakeup */ +#define HAL_DMAMUX2_SYNC_LPTIM2_OUT 8U /*!< DMAMUX2 synchronization Signal is LPTIM2 output */ +#define HAL_DMAMUX2_SYNC_LPTIM3_OUT 9U /*!< DMAMUX2 synchronization Signal is LPTIM3 output */ +#define HAL_DMAMUX2_SYNC_I2C4_WKUP 10U /*!< DMAMUX2 synchronization Signal is I2C4 Wakeup */ +#define HAL_DMAMUX2_SYNC_SPI6_WKUP 11U /*!< DMAMUX2 synchronization Signal is SPI6 Wakeup */ +#define HAL_DMAMUX2_SYNC_COMP1_OUT 12U /*!< DMAMUX2 synchronization Signal is Comparator 1 output */ +#define HAL_DMAMUX2_SYNC_RTC_WKUP 13U /*!< DMAMUX2 synchronization Signal is RTC Wakeup */ +#define HAL_DMAMUX2_SYNC_EXTI0 14U /*!< DMAMUX2 synchronization Signal is EXTI0 IT */ +#define HAL_DMAMUX2_SYNC_EXTI2 15U /*!< DMAMUX2 synchronization Signal is EXTI2 IT */ + +/** + * @} + */ + +/** @defgroup DMAEx_MUX_SyncPolarity_selection DMAEx MUX SyncPolarity selection + * @brief DMAEx MUX SyncPolarity selection + * @{ + */ +#define HAL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< block synchronization events */ +#define HAL_DMAMUX_SYNC_RISING DMAMUX_CxCR_SPOL_0 /*!< synchronize with rising edge events */ +#define HAL_DMAMUX_SYNC_FALLING DMAMUX_CxCR_SPOL_1 /*!< synchronize with falling edge events */ +#define HAL_DMAMUX_SYNC_RISING_FALLING DMAMUX_CxCR_SPOL /*!< synchronize with rising and falling edge events */ + +/** + * @} + */ + + +/** @defgroup DMAEx_MUX_SignalGeneratorID_selection DMAEx MUX SignalGeneratorID selection + * @brief DMAEx MUX SignalGeneratorID selection + * @{ + */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 0U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 1U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 2U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT 3U /*!< DMAMUX1 Request generator Signal is LPTIM1 OUT */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT 4U /*!< DMAMUX1 Request generator Signal is LPTIM2 OUT */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT 5U /*!< DMAMUX1 Request generator Signal is LPTIM3 OUT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI0 6U /*!< DMAMUX1 Request generator Signal is EXTI0 IT */ +#define HAL_DMAMUX1_REQ_GEN_TIM12_TRGO 7U /*!< DMAMUX1 Request generator Signal is TIM12 TRGO */ + +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT 0U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel0 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT 1U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel1 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT 2U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel2 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT 3U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel3 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT 4U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel4 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT 5U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel5 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT 6U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel6 Event */ +#define HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP 7U /*!< DMAMUX2 Request generator Signal is LPUART1 RX Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP 8U /*!< DMAMUX2 Request generator Signal is LPUART1 TX Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP 9U /*!< DMAMUX2 Request generator Signal is LPTIM2 Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT 10U /*!< DMAMUX2 Request generator Signal is LPTIM2 OUT */ +#define HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP 11U /*!< DMAMUX2 Request generator Signal is LPTIM3 Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT 12U /*!< DMAMUX2 Request generator Signal is LPTIM3 OUT */ +#if defined(LPTIM4) +#define HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP 13U /*!< DMAMUX2 Request generator Signal is LPTIM4 Wakeup */ +#endif /* LPTIM4 */ +#if defined(LPTIM5) +#define HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP 14U /*!< DMAMUX2 Request generator Signal is LPTIM5 Wakeup */ +#endif /* LPTIM5 */ +#define HAL_DMAMUX2_REQ_GEN_I2C4_WKUP 15U /*!< DMAMUX2 Request generator Signal is I2C4 Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_SPI6_WKUP 16U /*!< DMAMUX2 Request generator Signal is SPI6 Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_COMP1_OUT 17U /*!< DMAMUX2 Request generator Signal is Comparator 1 output */ +#define HAL_DMAMUX2_REQ_GEN_COMP2_OUT 18U /*!< DMAMUX2 Request generator Signal is Comparator 2 output */ +#define HAL_DMAMUX2_REQ_GEN_RTC_WKUP 19U /*!< DMAMUX2 Request generator Signal is RTC Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_EXTI0 20U /*!< DMAMUX2 Request generator Signal is EXTI0 */ +#define HAL_DMAMUX2_REQ_GEN_EXTI2 21U /*!< DMAMUX2 Request generator Signal is EXTI2 */ +#define HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT 22U /*!< DMAMUX2 Request generator Signal is I2C4 IT Event */ +#define HAL_DMAMUX2_REQ_GEN_SPI6_IT 23U /*!< DMAMUX2 Request generator Signal is SPI6 IT */ +#define HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT 24U /*!< DMAMUX2 Request generator Signal is LPUART1 Tx IT */ +#define HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT 25U /*!< DMAMUX2 Request generator Signal is LPUART1 Rx IT */ +#if defined(ADC3) +#define HAL_DMAMUX2_REQ_GEN_ADC3_IT 26U /*!< DMAMUX2 Request generator Signal is ADC3 IT */ +#define HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT 27U /*!< DMAMUX2 Request generator Signal is ADC3 Analog Watchdog 1 output */ +#endif /* ADC3 */ +#define HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT 28U /*!< DMAMUX2 Request generator Signal is BDMA Channel 0 IT */ +#define HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT 29U /*!< DMAMUX2 Request generator Signal is BDMA Channel 1 IT */ + + +/** + * @} + */ + +/** @defgroup DMAEx_MUX_RequestGeneneratorPolarity_selection DMAEx MUX RequestGeneneratorPolarity selection + * @brief DMAEx MUX RequestGeneneratorPolarity selection + * @{ + */ +#define HAL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< block request generator events */ +#define HAL_DMAMUX_REQ_GEN_RISING DMAMUX_RGxCR_GPOL_0 /*!< generate request on rising edge events */ +#define HAL_DMAMUX_REQ_GEN_FALLING DMAMUX_RGxCR_GPOL_1 /*!< generate request on falling edge events */ +#define HAL_DMAMUX_REQ_GEN_RISING_FALLING DMAMUX_RGxCR_GPOL /*!< generate request on rising and falling edge events */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @brief DMAEx Exported functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * @{ + */ + +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory); +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig); +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma); + +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMA Private Macros + * @brief DMAEx private macros + * @{ + */ + +#define IS_DMA_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_TIM12_TRGO) +#define IS_BDMA_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX2_SYNC_EXTI2) + +#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) + +#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) + +#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ + ((EVENT) == ENABLE)) + +#define IS_DMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_TIM12_TRGO) +#define IS_BDMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT) + +#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Functions DMAEx Private Functions + * @brief DMAEx Private functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DMA_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dsi.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dsi.h new file mode 100644 index 0000000..2aaaeb3 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dsi.h @@ -0,0 +1,1377 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dsi.h + * @author MCD Application Team + * @brief Header file of DSI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DSI_H +#define STM32H7xx_HAL_DSI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +#if defined(DSI) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup DSI DSI + * @brief DSI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DSI_Exported_Types DSI Exported Types + * @{ + */ +/** + * @brief DSI Init Structure definition + */ +typedef struct +{ + uint32_t AutomaticClockLaneControl; /*!< Automatic clock lane control + This parameter can be any value of @ref DSI_Automatic_Clk_Lane_Control */ + + uint32_t TXEscapeCkdiv; /*!< TX Escape clock division + The values 0 and 1 stop the TX_ESC clock generation */ + + uint32_t NumberOfLanes; /*!< Number of lanes + This parameter can be any value of @ref DSI_Number_Of_Lanes */ + +} DSI_InitTypeDef; + +/** + * @brief DSI PLL Clock structure definition + */ +typedef struct +{ + uint32_t PLLNDIV; /*!< PLL Loop Division Factor + This parameter must be a value between 10 and 125 */ + + uint32_t PLLIDF; /*!< PLL Input Division Factor + This parameter can be any value of @ref DSI_PLL_IDF */ + + uint32_t PLLODF; /*!< PLL Output Division Factor + This parameter can be any value of @ref DSI_PLL_ODF */ + +} DSI_PLLInitTypeDef; + +/** + * @brief DSI Video mode configuration + */ +typedef struct +{ + uint32_t VirtualChannelID; /*!< Virtual channel ID */ + + uint32_t ColorCoding; /*!< Color coding for LTDC interface + This parameter can be any value of @ref DSI_Color_Coding */ + + uint32_t LooselyPacked; /*!< Enable or disable loosely packed stream (needed only when using + 18-bit configuration). + This parameter can be any value of @ref DSI_LooselyPacked */ + + uint32_t Mode; /*!< Video mode type + This parameter can be any value of @ref DSI_Video_Mode_Type */ + + uint32_t PacketSize; /*!< Video packet size */ + + uint32_t NumberOfChunks; /*!< Number of chunks */ + + uint32_t NullPacketSize; /*!< Null packet size */ + + uint32_t HSPolarity; /*!< HSYNC pin polarity + This parameter can be any value of @ref DSI_HSYNC_Polarity */ + + uint32_t VSPolarity; /*!< VSYNC pin polarity + This parameter can be any value of @ref DSI_VSYNC_Active_Polarity */ + + uint32_t DEPolarity; /*!< Data Enable pin polarity + This parameter can be any value of @ref DSI_DATA_ENABLE_Polarity */ + + uint32_t HorizontalSyncActive; /*!< Horizontal synchronism active duration (in lane byte clock cycles) */ + + uint32_t HorizontalBackPorch; /*!< Horizontal back-porch duration (in lane byte clock cycles) */ + + uint32_t HorizontalLine; /*!< Horizontal line duration (in lane byte clock cycles) */ + + uint32_t VerticalSyncActive; /*!< Vertical synchronism active duration */ + + uint32_t VerticalBackPorch; /*!< Vertical back-porch duration */ + + uint32_t VerticalFrontPorch; /*!< Vertical front-porch duration */ + + uint32_t VerticalActive; /*!< Vertical active duration */ + + uint32_t LPCommandEnable; /*!< Low-power command enable + This parameter can be any value of @ref DSI_LP_Command */ + + uint32_t LPLargestPacketSize; /*!< The size, in bytes, of the low power largest packet that + can fit in a line during VSA, VBP and VFP regions */ + + uint32_t LPVACTLargestPacketSize; /*!< The size, in bytes, of the low power largest packet that + can fit in a line during VACT region */ + + uint32_t LPHorizontalFrontPorchEnable; /*!< Low-power horizontal front-porch enable + This parameter can be any value of @ref DSI_LP_HFP */ + + uint32_t LPHorizontalBackPorchEnable; /*!< Low-power horizontal back-porch enable + This parameter can be any value of @ref DSI_LP_HBP */ + + uint32_t LPVerticalActiveEnable; /*!< Low-power vertical active enable + This parameter can be any value of @ref DSI_LP_VACT */ + + uint32_t LPVerticalFrontPorchEnable; /*!< Low-power vertical front-porch enable + This parameter can be any value of @ref DSI_LP_VFP */ + + uint32_t LPVerticalBackPorchEnable; /*!< Low-power vertical back-porch enable + This parameter can be any value of @ref DSI_LP_VBP */ + + uint32_t LPVerticalSyncActiveEnable; /*!< Low-power vertical sync active enable + This parameter can be any value of @ref DSI_LP_VSYNC */ + + uint32_t FrameBTAAcknowledgeEnable; /*!< Frame bus-turn-around acknowledge enable + This parameter can be any value of @ref DSI_FBTA_acknowledge */ + +} DSI_VidCfgTypeDef; + +/** + * @brief DSI Adapted command mode configuration + */ +typedef struct +{ + uint32_t VirtualChannelID; /*!< Virtual channel ID */ + + uint32_t ColorCoding; /*!< Color coding for LTDC interface + This parameter can be any value of @ref DSI_Color_Coding */ + + uint32_t CommandSize; /*!< Maximum allowed size for an LTDC write memory command, measured in + pixels. This parameter can be any value between 0x00 and 0xFFFFU */ + + uint32_t TearingEffectSource; /*!< Tearing effect source + This parameter can be any value of @ref DSI_TearingEffectSource */ + + uint32_t TearingEffectPolarity; /*!< Tearing effect pin polarity + This parameter can be any value of @ref DSI_TearingEffectPolarity */ + + uint32_t HSPolarity; /*!< HSYNC pin polarity + This parameter can be any value of @ref DSI_HSYNC_Polarity */ + + uint32_t VSPolarity; /*!< VSYNC pin polarity + This parameter can be any value of @ref DSI_VSYNC_Active_Polarity */ + + uint32_t DEPolarity; /*!< Data Enable pin polarity + This parameter can be any value of @ref DSI_DATA_ENABLE_Polarity */ + + uint32_t VSyncPol; /*!< VSync edge on which the LTDC is halted + This parameter can be any value of @ref DSI_Vsync_Polarity */ + + uint32_t AutomaticRefresh; /*!< Automatic refresh mode + This parameter can be any value of @ref DSI_AutomaticRefresh */ + + uint32_t TEAcknowledgeRequest; /*!< Tearing Effect Acknowledge Request Enable + This parameter can be any value of @ref DSI_TE_AcknowledgeRequest */ + +} DSI_CmdCfgTypeDef; + +/** + * @brief DSI command transmission mode configuration + */ +typedef struct +{ + uint32_t LPGenShortWriteNoP; /*!< Generic Short Write Zero parameters Transmission + This parameter can be any value of @ref DSI_LP_LPGenShortWriteNoP */ + + uint32_t LPGenShortWriteOneP; /*!< Generic Short Write One parameter Transmission + This parameter can be any value of @ref DSI_LP_LPGenShortWriteOneP */ + + uint32_t LPGenShortWriteTwoP; /*!< Generic Short Write Two parameters Transmission + This parameter can be any value of @ref DSI_LP_LPGenShortWriteTwoP */ + + uint32_t LPGenShortReadNoP; /*!< Generic Short Read Zero parameters Transmission + This parameter can be any value of @ref DSI_LP_LPGenShortReadNoP */ + + uint32_t LPGenShortReadOneP; /*!< Generic Short Read One parameter Transmission + This parameter can be any value of @ref DSI_LP_LPGenShortReadOneP */ + + uint32_t LPGenShortReadTwoP; /*!< Generic Short Read Two parameters Transmission + This parameter can be any value of @ref DSI_LP_LPGenShortReadTwoP */ + + uint32_t LPGenLongWrite; /*!< Generic Long Write Transmission + This parameter can be any value of @ref DSI_LP_LPGenLongWrite */ + + uint32_t LPDcsShortWriteNoP; /*!< DCS Short Write Zero parameters Transmission + This parameter can be any value of @ref DSI_LP_LPDcsShortWriteNoP */ + + uint32_t LPDcsShortWriteOneP; /*!< DCS Short Write One parameter Transmission + This parameter can be any value of @ref DSI_LP_LPDcsShortWriteOneP */ + + uint32_t LPDcsShortReadNoP; /*!< DCS Short Read Zero parameters Transmission + This parameter can be any value of @ref DSI_LP_LPDcsShortReadNoP */ + + uint32_t LPDcsLongWrite; /*!< DCS Long Write Transmission + This parameter can be any value of @ref DSI_LP_LPDcsLongWrite */ + + uint32_t LPMaxReadPacket; /*!< Maximum Read Packet Size Transmission + This parameter can be any value of @ref DSI_LP_LPMaxReadPacket */ + + uint32_t AcknowledgeRequest; /*!< Acknowledge Request Enable + This parameter can be any value of @ref DSI_AcknowledgeRequest */ + +} DSI_LPCmdTypeDef; + +/** + * @brief DSI PHY Timings definition + */ +typedef struct +{ + uint32_t ClockLaneHS2LPTime; /*!< The maximum time that the D-PHY clock lane takes to go from high-speed + to low-power transmission */ + + uint32_t ClockLaneLP2HSTime; /*!< The maximum time that the D-PHY clock lane takes to go from low-power + to high-speed transmission */ + + uint32_t DataLaneHS2LPTime; /*!< The maximum time that the D-PHY data lanes takes to go from high-speed + to low-power transmission */ + + uint32_t DataLaneLP2HSTime; /*!< The maximum time that the D-PHY data lanes takes to go from low-power + to high-speed transmission */ + + uint32_t DataLaneMaxReadTime; /*!< The maximum time required to perform a read command */ + + uint32_t StopWaitTime; /*!< The minimum wait period to request a High-Speed transmission after the + Stop state */ + +} DSI_PHY_TimerTypeDef; + +/** + * @brief DSI HOST Timeouts definition + */ +typedef struct +{ + uint32_t TimeoutCkdiv; /*!< Time-out clock division */ + + uint32_t HighSpeedTransmissionTimeout; /*!< High-speed transmission time-out */ + + uint32_t LowPowerReceptionTimeout; /*!< Low-power reception time-out */ + + uint32_t HighSpeedReadTimeout; /*!< High-speed read time-out */ + + uint32_t LowPowerReadTimeout; /*!< Low-power read time-out */ + + uint32_t HighSpeedWriteTimeout; /*!< High-speed write time-out */ + + uint32_t HighSpeedWritePrespMode; /*!< High-speed write presp mode + This parameter can be any value of @ref DSI_HS_PrespMode */ + + uint32_t LowPowerWriteTimeout; /*!< Low-speed write time-out */ + + uint32_t BTATimeout; /*!< BTA time-out */ + +} DSI_HOST_TimeoutTypeDef; + +/** + * @brief DSI States Structure definition + */ +typedef enum +{ + HAL_DSI_STATE_RESET = 0x00U, + HAL_DSI_STATE_READY = 0x01U, + HAL_DSI_STATE_ERROR = 0x02U, + HAL_DSI_STATE_BUSY = 0x03U, + HAL_DSI_STATE_TIMEOUT = 0x04U +} HAL_DSI_StateTypeDef; + +/** + * @brief DSI Handle Structure definition + */ +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) +typedef struct __DSI_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ +{ + DSI_TypeDef *Instance; /*!< Register base address */ + DSI_InitTypeDef Init; /*!< DSI required parameters */ + HAL_LockTypeDef Lock; /*!< DSI peripheral status */ + __IO HAL_DSI_StateTypeDef State; /*!< DSI communication state */ + __IO uint32_t ErrorCode; /*!< DSI Error code */ + uint32_t ErrorMsk; /*!< DSI Error monitoring mask */ + +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) + void (* TearingEffectCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI Tearing Effect Callback */ + void (* EndOfRefreshCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI End Of Refresh Callback */ + void (* ErrorCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI Error Callback */ + + void (* MspInitCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI Msp Init callback */ + void (* MspDeInitCallback)(struct __DSI_HandleTypeDef *hdsi); /*!< DSI Msp DeInit callback */ + +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ + +} DSI_HandleTypeDef; + +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DSI Callback ID enumeration definition + */ +typedef enum +{ + HAL_DSI_MSPINIT_CB_ID = 0x00U, /*!< DSI MspInit callback ID */ + HAL_DSI_MSPDEINIT_CB_ID = 0x01U, /*!< DSI MspDeInit callback ID */ + + HAL_DSI_TEARING_EFFECT_CB_ID = 0x02U, /*!< DSI Tearing Effect Callback ID */ + HAL_DSI_ENDOF_REFRESH_CB_ID = 0x03U, /*!< DSI End Of Refresh Callback ID */ + HAL_DSI_ERROR_CB_ID = 0x04U /*!< DSI Error Callback ID */ + +} HAL_DSI_CallbackIDTypeDef; + +/** + * @brief HAL DSI Callback pointer definition + */ +typedef void (*pDSI_CallbackTypeDef)(DSI_HandleTypeDef *hdsi); /*!< pointer to an DSI callback function */ + +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DSI_Exported_Constants DSI Exported Constants + * @{ + */ +/** @defgroup DSI_DCS_Command DSI DCS Command + * @{ + */ +#define DSI_ENTER_IDLE_MODE 0x39U +#define DSI_ENTER_INVERT_MODE 0x21U +#define DSI_ENTER_NORMAL_MODE 0x13U +#define DSI_ENTER_PARTIAL_MODE 0x12U +#define DSI_ENTER_SLEEP_MODE 0x10U +#define DSI_EXIT_IDLE_MODE 0x38U +#define DSI_EXIT_INVERT_MODE 0x20U +#define DSI_EXIT_SLEEP_MODE 0x11U +#define DSI_GET_3D_CONTROL 0x3FU +#define DSI_GET_ADDRESS_MODE 0x0BU +#define DSI_GET_BLUE_CHANNEL 0x08U +#define DSI_GET_DIAGNOSTIC_RESULT 0x0FU +#define DSI_GET_DISPLAY_MODE 0x0DU +#define DSI_GET_GREEN_CHANNEL 0x07U +#define DSI_GET_PIXEL_FORMAT 0x0CU +#define DSI_GET_POWER_MODE 0x0AU +#define DSI_GET_RED_CHANNEL 0x06U +#define DSI_GET_SCANLINE 0x45U +#define DSI_GET_SIGNAL_MODE 0x0EU +#define DSI_NOP 0x00U +#define DSI_READ_DDB_CONTINUE 0xA8U +#define DSI_READ_DDB_START 0xA1U +#define DSI_READ_MEMORY_CONTINUE 0x3EU +#define DSI_READ_MEMORY_START 0x2EU +#define DSI_SET_3D_CONTROL 0x3DU +#define DSI_SET_ADDRESS_MODE 0x36U +#define DSI_SET_COLUMN_ADDRESS 0x2AU +#define DSI_SET_DISPLAY_OFF 0x28U +#define DSI_SET_DISPLAY_ON 0x29U +#define DSI_SET_GAMMA_CURVE 0x26U +#define DSI_SET_PAGE_ADDRESS 0x2BU +#define DSI_SET_PARTIAL_COLUMNS 0x31U +#define DSI_SET_PARTIAL_ROWS 0x30U +#define DSI_SET_PIXEL_FORMAT 0x3AU +#define DSI_SET_SCROLL_AREA 0x33U +#define DSI_SET_SCROLL_START 0x37U +#define DSI_SET_TEAR_OFF 0x34U +#define DSI_SET_TEAR_ON 0x35U +#define DSI_SET_TEAR_SCANLINE 0x44U +#define DSI_SET_VSYNC_TIMING 0x40U +#define DSI_SOFT_RESET 0x01U +#define DSI_WRITE_LUT 0x2DU +#define DSI_WRITE_MEMORY_CONTINUE 0x3CU +#define DSI_WRITE_MEMORY_START 0x2CU +/** + * @} + */ + +/** @defgroup DSI_Video_Mode_Type DSI Video Mode Type + * @{ + */ +#define DSI_VID_MODE_NB_PULSES 0U +#define DSI_VID_MODE_NB_EVENTS 1U +#define DSI_VID_MODE_BURST 2U +/** + * @} + */ + +/** @defgroup DSI_Color_Mode DSI Color Mode + * @{ + */ +#define DSI_COLOR_MODE_FULL 0x00000000U +#define DSI_COLOR_MODE_EIGHT DSI_WCR_COLM +/** + * @} + */ + +/** @defgroup DSI_ShutDown DSI ShutDown + * @{ + */ +#define DSI_DISPLAY_ON 0x00000000U +#define DSI_DISPLAY_OFF DSI_WCR_SHTDN +/** + * @} + */ + +/** @defgroup DSI_LP_Command DSI LP Command + * @{ + */ +#define DSI_LP_COMMAND_DISABLE 0x00000000U +#define DSI_LP_COMMAND_ENABLE DSI_VMCR_LPCE +/** + * @} + */ + +/** @defgroup DSI_LP_HFP DSI LP HFP + * @{ + */ +#define DSI_LP_HFP_DISABLE 0x00000000U +#define DSI_LP_HFP_ENABLE DSI_VMCR_LPHFPE +/** + * @} + */ + +/** @defgroup DSI_LP_HBP DSI LP HBP + * @{ + */ +#define DSI_LP_HBP_DISABLE 0x00000000U +#define DSI_LP_HBP_ENABLE DSI_VMCR_LPHBPE +/** + * @} + */ + +/** @defgroup DSI_LP_VACT DSI LP VACT + * @{ + */ +#define DSI_LP_VACT_DISABLE 0x00000000U +#define DSI_LP_VACT_ENABLE DSI_VMCR_LPVAE +/** + * @} + */ + +/** @defgroup DSI_LP_VFP DSI LP VFP + * @{ + */ +#define DSI_LP_VFP_DISABLE 0x00000000U +#define DSI_LP_VFP_ENABLE DSI_VMCR_LPVFPE +/** + * @} + */ + +/** @defgroup DSI_LP_VBP DSI LP VBP + * @{ + */ +#define DSI_LP_VBP_DISABLE 0x00000000U +#define DSI_LP_VBP_ENABLE DSI_VMCR_LPVBPE +/** + * @} + */ + +/** @defgroup DSI_LP_VSYNC DSI LP VSYNC + * @{ + */ +#define DSI_LP_VSYNC_DISABLE 0x00000000U +#define DSI_LP_VSYNC_ENABLE DSI_VMCR_LPVSAE +/** + * @} + */ + +/** @defgroup DSI_FBTA_acknowledge DSI FBTA Acknowledge + * @{ + */ +#define DSI_FBTAA_DISABLE 0x00000000U +#define DSI_FBTAA_ENABLE DSI_VMCR_FBTAAE +/** + * @} + */ + +/** @defgroup DSI_TearingEffectSource DSI Tearing Effect Source + * @{ + */ +#define DSI_TE_DSILINK 0x00000000U +#define DSI_TE_EXTERNAL DSI_WCFGR_TESRC +/** + * @} + */ + +/** @defgroup DSI_TearingEffectPolarity DSI Tearing Effect Polarity + * @{ + */ +#define DSI_TE_RISING_EDGE 0x00000000U +#define DSI_TE_FALLING_EDGE DSI_WCFGR_TEPOL +/** + * @} + */ + +/** @defgroup DSI_Vsync_Polarity DSI Vsync Polarity + * @{ + */ +#define DSI_VSYNC_FALLING 0x00000000U +#define DSI_VSYNC_RISING DSI_WCFGR_VSPOL +/** + * @} + */ + +/** @defgroup DSI_AutomaticRefresh DSI Automatic Refresh + * @{ + */ +#define DSI_AR_DISABLE 0x00000000U +#define DSI_AR_ENABLE DSI_WCFGR_AR +/** + * @} + */ + +/** @defgroup DSI_TE_AcknowledgeRequest DSI TE Acknowledge Request + * @{ + */ +#define DSI_TE_ACKNOWLEDGE_DISABLE 0x00000000U +#define DSI_TE_ACKNOWLEDGE_ENABLE DSI_CMCR_TEARE +/** + * @} + */ + +/** @defgroup DSI_AcknowledgeRequest DSI Acknowledge Request + * @{ + */ +#define DSI_ACKNOWLEDGE_DISABLE 0x00000000U +#define DSI_ACKNOWLEDGE_ENABLE DSI_CMCR_ARE +/** + * @} + */ + +/** @defgroup DSI_LP_LPGenShortWriteNoP DSI LP LPGen Short Write NoP + * @{ + */ +#define DSI_LP_GSW0P_DISABLE 0x00000000U +#define DSI_LP_GSW0P_ENABLE DSI_CMCR_GSW0TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPGenShortWriteOneP DSI LP LPGen Short Write OneP + * @{ + */ +#define DSI_LP_GSW1P_DISABLE 0x00000000U +#define DSI_LP_GSW1P_ENABLE DSI_CMCR_GSW1TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPGenShortWriteTwoP DSI LP LPGen Short Write TwoP + * @{ + */ +#define DSI_LP_GSW2P_DISABLE 0x00000000U +#define DSI_LP_GSW2P_ENABLE DSI_CMCR_GSW2TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPGenShortReadNoP DSI LP LPGen Short Read NoP + * @{ + */ +#define DSI_LP_GSR0P_DISABLE 0x00000000U +#define DSI_LP_GSR0P_ENABLE DSI_CMCR_GSR0TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPGenShortReadOneP DSI LP LPGen Short Read OneP + * @{ + */ +#define DSI_LP_GSR1P_DISABLE 0x00000000U +#define DSI_LP_GSR1P_ENABLE DSI_CMCR_GSR1TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPGenShortReadTwoP DSI LP LPGen Short Read TwoP + * @{ + */ +#define DSI_LP_GSR2P_DISABLE 0x00000000U +#define DSI_LP_GSR2P_ENABLE DSI_CMCR_GSR2TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPGenLongWrite DSI LP LPGen LongWrite + * @{ + */ +#define DSI_LP_GLW_DISABLE 0x00000000U +#define DSI_LP_GLW_ENABLE DSI_CMCR_GLWTX +/** + * @} + */ + +/** @defgroup DSI_LP_LPDcsShortWriteNoP DSI LP LPDcs Short Write NoP + * @{ + */ +#define DSI_LP_DSW0P_DISABLE 0x00000000U +#define DSI_LP_DSW0P_ENABLE DSI_CMCR_DSW0TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPDcsShortWriteOneP DSI LP LPDcs Short Write OneP + * @{ + */ +#define DSI_LP_DSW1P_DISABLE 0x00000000U +#define DSI_LP_DSW1P_ENABLE DSI_CMCR_DSW1TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPDcsShortReadNoP DSI LP LPDcs Short Read NoP + * @{ + */ +#define DSI_LP_DSR0P_DISABLE 0x00000000U +#define DSI_LP_DSR0P_ENABLE DSI_CMCR_DSR0TX +/** + * @} + */ + +/** @defgroup DSI_LP_LPDcsLongWrite DSI LP LPDcs Long Write + * @{ + */ +#define DSI_LP_DLW_DISABLE 0x00000000U +#define DSI_LP_DLW_ENABLE DSI_CMCR_DLWTX +/** + * @} + */ + +/** @defgroup DSI_LP_LPMaxReadPacket DSI LP LPMax Read Packet + * @{ + */ +#define DSI_LP_MRDP_DISABLE 0x00000000U +#define DSI_LP_MRDP_ENABLE DSI_CMCR_MRDPS +/** + * @} + */ + +/** @defgroup DSI_HS_PrespMode DSI HS Presp Mode + * @{ + */ +#define DSI_HS_PM_DISABLE 0x00000000U +#define DSI_HS_PM_ENABLE DSI_TCCR3_PM +/** + * @} + */ + + +/** @defgroup DSI_Automatic_Clk_Lane_Control DSI Automatic Clk Lane Control + * @{ + */ +#define DSI_AUTO_CLK_LANE_CTRL_DISABLE 0x00000000U +#define DSI_AUTO_CLK_LANE_CTRL_ENABLE DSI_CLCR_ACR +/** + * @} + */ + +/** @defgroup DSI_Number_Of_Lanes DSI Number Of Lanes + * @{ + */ +#define DSI_ONE_DATA_LANE 0U +#define DSI_TWO_DATA_LANES 1U +/** + * @} + */ + +/** @defgroup DSI_FlowControl DSI Flow Control + * @{ + */ +#define DSI_FLOW_CONTROL_CRC_RX DSI_PCR_CRCRXE +#define DSI_FLOW_CONTROL_ECC_RX DSI_PCR_ECCRXE +#define DSI_FLOW_CONTROL_BTA DSI_PCR_BTAE +#define DSI_FLOW_CONTROL_EOTP_RX DSI_PCR_ETRXE +#define DSI_FLOW_CONTROL_EOTP_TX DSI_PCR_ETTXE +#define DSI_FLOW_CONTROL_ALL (DSI_FLOW_CONTROL_CRC_RX | DSI_FLOW_CONTROL_ECC_RX | \ + DSI_FLOW_CONTROL_BTA | DSI_FLOW_CONTROL_EOTP_RX | \ + DSI_FLOW_CONTROL_EOTP_TX) +/** + * @} + */ + +/** @defgroup DSI_Color_Coding DSI Color Coding + * @{ + */ +#define DSI_RGB565 0x00000000U /*!< The values 0x00000001 and 0x00000002 can also be used for the RGB565 color mode configuration */ +#define DSI_RGB666 0x00000003U /*!< The value 0x00000004 can also be used for the RGB666 color mode configuration */ +#define DSI_RGB888 0x00000005U +/** + * @} + */ + +/** @defgroup DSI_LooselyPacked DSI Loosely Packed + * @{ + */ +#define DSI_LOOSELY_PACKED_ENABLE DSI_LCOLCR_LPE +#define DSI_LOOSELY_PACKED_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup DSI_HSYNC_Polarity DSI HSYNC Polarity + * @{ + */ +#define DSI_HSYNC_ACTIVE_HIGH 0x00000000U +#define DSI_HSYNC_ACTIVE_LOW DSI_LPCR_HSP +/** + * @} + */ + +/** @defgroup DSI_VSYNC_Active_Polarity DSI VSYNC Active Polarity + * @{ + */ +#define DSI_VSYNC_ACTIVE_HIGH 0x00000000U +#define DSI_VSYNC_ACTIVE_LOW DSI_LPCR_VSP +/** + * @} + */ + +/** @defgroup DSI_DATA_ENABLE_Polarity DSI DATA ENABLE Polarity + * @{ + */ +#define DSI_DATA_ENABLE_ACTIVE_HIGH 0x00000000U +#define DSI_DATA_ENABLE_ACTIVE_LOW DSI_LPCR_DEP +/** + * @} + */ + +/** @defgroup DSI_PLL_IDF DSI PLL IDF + * @{ + */ +#define DSI_PLL_IN_DIV1 0x00000001U +#define DSI_PLL_IN_DIV2 0x00000002U +#define DSI_PLL_IN_DIV3 0x00000003U +#define DSI_PLL_IN_DIV4 0x00000004U +#define DSI_PLL_IN_DIV5 0x00000005U +#define DSI_PLL_IN_DIV6 0x00000006U +#define DSI_PLL_IN_DIV7 0x00000007U +/** + * @} + */ + +/** @defgroup DSI_PLL_ODF DSI PLL ODF + * @{ + */ +#define DSI_PLL_OUT_DIV1 0x00000000U +#define DSI_PLL_OUT_DIV2 0x00000001U +#define DSI_PLL_OUT_DIV4 0x00000002U +#define DSI_PLL_OUT_DIV8 0x00000003U +/** + * @} + */ + +/** @defgroup DSI_Flags DSI Flags + * @{ + */ +#define DSI_FLAG_TE DSI_WISR_TEIF +#define DSI_FLAG_ER DSI_WISR_ERIF +#define DSI_FLAG_BUSY DSI_WISR_BUSY +#define DSI_FLAG_PLLLS DSI_WISR_PLLLS +#define DSI_FLAG_PLLL DSI_WISR_PLLLIF +#define DSI_FLAG_PLLU DSI_WISR_PLLUIF +#define DSI_FLAG_RRS DSI_WISR_RRS +#define DSI_FLAG_RR DSI_WISR_RRIF +/** + * @} + */ + +/** @defgroup DSI_Interrupts DSI Interrupts + * @{ + */ +#define DSI_IT_TE DSI_WIER_TEIE +#define DSI_IT_ER DSI_WIER_ERIE +#define DSI_IT_PLLL DSI_WIER_PLLLIE +#define DSI_IT_PLLU DSI_WIER_PLLUIE +#define DSI_IT_RR DSI_WIER_RRIE +/** + * @} + */ + +/** @defgroup DSI_SHORT_WRITE_PKT_Data_Type DSI SHORT WRITE PKT Data Type + * @{ + */ +#define DSI_DCS_SHORT_PKT_WRITE_P0 0x00000005U /*!< DCS short write, no parameters */ +#define DSI_DCS_SHORT_PKT_WRITE_P1 0x00000015U /*!< DCS short write, one parameter */ +#define DSI_GEN_SHORT_PKT_WRITE_P0 0x00000003U /*!< Generic short write, no parameters */ +#define DSI_GEN_SHORT_PKT_WRITE_P1 0x00000013U /*!< Generic short write, one parameter */ +#define DSI_GEN_SHORT_PKT_WRITE_P2 0x00000023U /*!< Generic short write, two parameters */ +/** + * @} + */ + +/** @defgroup DSI_LONG_WRITE_PKT_Data_Type DSI LONG WRITE PKT Data Type + * @{ + */ +#define DSI_DCS_LONG_PKT_WRITE 0x00000039U /*!< DCS long write */ +#define DSI_GEN_LONG_PKT_WRITE 0x00000029U /*!< Generic long write */ +/** + * @} + */ + +/** @defgroup DSI_SHORT_READ_PKT_Data_Type DSI SHORT READ PKT Data Type + * @{ + */ +#define DSI_DCS_SHORT_PKT_READ 0x00000006U /*!< DCS short read */ +#define DSI_GEN_SHORT_PKT_READ_P0 0x00000004U /*!< Generic short read, no parameters */ +#define DSI_GEN_SHORT_PKT_READ_P1 0x00000014U /*!< Generic short read, one parameter */ +#define DSI_GEN_SHORT_PKT_READ_P2 0x00000024U /*!< Generic short read, two parameters */ +/** + * @} + */ + +/** @defgroup DSI_Error_Data_Type DSI Error Data Type + * @{ + */ +#define HAL_DSI_ERROR_NONE 0U +#define HAL_DSI_ERROR_ACK 0x00000001U /*!< Acknowledge errors */ +#define HAL_DSI_ERROR_PHY 0x00000002U /*!< PHY related errors */ +#define HAL_DSI_ERROR_TX 0x00000004U /*!< Transmission error */ +#define HAL_DSI_ERROR_RX 0x00000008U /*!< Reception error */ +#define HAL_DSI_ERROR_ECC 0x00000010U /*!< ECC errors */ +#define HAL_DSI_ERROR_CRC 0x00000020U /*!< CRC error */ +#define HAL_DSI_ERROR_PSE 0x00000040U /*!< Packet Size error */ +#define HAL_DSI_ERROR_EOT 0x00000080U /*!< End Of Transmission error */ +#define HAL_DSI_ERROR_OVF 0x00000100U /*!< FIFO overflow error */ +#define HAL_DSI_ERROR_GEN 0x00000200U /*!< Generic FIFO related errors */ +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) +#define HAL_DSI_ERROR_INVALID_CALLBACK 0x00000400U /*!< DSI Invalid Callback error */ +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup DSI_Lane_Group DSI Lane Group + * @{ + */ +#define DSI_CLOCK_LANE 0x00000000U +#define DSI_DATA_LANES 0x00000001U +/** + * @} + */ + +/** @defgroup DSI_Communication_Delay DSI Communication Delay + * @{ + */ +#define DSI_SLEW_RATE_HSTX 0x00000000U +#define DSI_SLEW_RATE_LPTX 0x00000001U +#define DSI_HS_DELAY 0x00000002U +/** + * @} + */ + +/** @defgroup DSI_CustomLane DSI CustomLane + * @{ + */ +#define DSI_SWAP_LANE_PINS 0x00000000U +#define DSI_INVERT_HS_SIGNAL 0x00000001U +/** + * @} + */ + +/** @defgroup DSI_Lane_Select DSI Lane Select + * @{ + */ +#define DSI_CLK_LANE 0x00000000U +#define DSI_DATA_LANE0 0x00000001U +#define DSI_DATA_LANE1 0x00000002U +/** + * @} + */ + +/** @defgroup DSI_PHY_Timing DSI PHY Timing + * @{ + */ +#define DSI_TCLK_POST 0x00000000U +#define DSI_TLPX_CLK 0x00000001U +#define DSI_THS_EXIT 0x00000002U +#define DSI_TLPX_DATA 0x00000003U +#define DSI_THS_ZERO 0x00000004U +#define DSI_THS_TRAIL 0x00000005U +#define DSI_THS_PREPARE 0x00000006U +#define DSI_TCLK_ZERO 0x00000007U +#define DSI_TCLK_PREPARE 0x00000008U +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DSI_Exported_Macros DSI Exported Macros + * @{ + */ + +/** + * @brief Reset DSI handle state. + * @param __HANDLE__ DSI handle + * @retval None + */ +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) +#define __HAL_DSI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_DSI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_DSI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DSI_STATE_RESET) +#endif /*USE_HAL_DSI_REGISTER_CALLBACKS */ + +/** + * @brief Enables the DSI host. + * @param __HANDLE__ DSI handle + * @retval None. + */ +#define __HAL_DSI_ENABLE(__HANDLE__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT((__HANDLE__)->Instance->CR, DSI_CR_EN);\ + /* Delay after an DSI Host enabling */ \ + tmpreg = READ_BIT((__HANDLE__)->Instance->CR, DSI_CR_EN);\ + UNUSED(tmpreg); \ + } while(0U) + +/** + * @brief Disables the DSI host. + * @param __HANDLE__ DSI handle + * @retval None. + */ +#define __HAL_DSI_DISABLE(__HANDLE__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + CLEAR_BIT((__HANDLE__)->Instance->CR, DSI_CR_EN);\ + /* Delay after an DSI Host disabling */ \ + tmpreg = READ_BIT((__HANDLE__)->Instance->CR, DSI_CR_EN);\ + UNUSED(tmpreg); \ + } while(0U) + +/** + * @brief Enables the DSI wrapper. + * @param __HANDLE__ DSI handle + * @retval None. + */ +#define __HAL_DSI_WRAPPER_ENABLE(__HANDLE__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\ + /* Delay after an DSI wrapper enabling */ \ + tmpreg = READ_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0U) + +/** + * @brief Disable the DSI wrapper. + * @param __HANDLE__ DSI handle + * @retval None. + */ +#define __HAL_DSI_WRAPPER_DISABLE(__HANDLE__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + CLEAR_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\ + /* Delay after an DSI wrapper disabling*/ \ + tmpreg = READ_BIT((__HANDLE__)->Instance->WCR, DSI_WCR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0U) + +/** + * @brief Enables the DSI PLL. + * @param __HANDLE__ DSI handle + * @retval None. + */ +#define __HAL_DSI_PLL_ENABLE(__HANDLE__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_PLLEN);\ + /* Delay after an DSI PLL enabling */ \ + tmpreg = READ_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_PLLEN);\ + UNUSED(tmpreg); \ + } while(0U) + +/** + * @brief Disables the DSI PLL. + * @param __HANDLE__ DSI handle + * @retval None. + */ +#define __HAL_DSI_PLL_DISABLE(__HANDLE__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + CLEAR_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_PLLEN);\ + /* Delay after an DSI PLL disabling */ \ + tmpreg = READ_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_PLLEN);\ + UNUSED(tmpreg); \ + } while(0U) + +/** + * @brief Enables the DSI regulator. + * @param __HANDLE__ DSI handle + * @retval None. + */ +#define __HAL_DSI_REG_ENABLE(__HANDLE__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + SET_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_REGEN);\ + /* Delay after an DSI regulator enabling */ \ + tmpreg = READ_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_REGEN);\ + UNUSED(tmpreg); \ + } while(0U) + +/** + * @brief Disables the DSI regulator. + * @param __HANDLE__ DSI handle + * @retval None. + */ +#define __HAL_DSI_REG_DISABLE(__HANDLE__) do { \ + __IO uint32_t tmpreg = 0x00U; \ + CLEAR_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_REGEN);\ + /* Delay after an DSI regulator disabling */ \ + tmpreg = READ_BIT((__HANDLE__)->Instance->WRPCR, DSI_WRPCR_REGEN);\ + UNUSED(tmpreg); \ + } while(0U) + +/** + * @brief Get the DSI pending flags. + * @param __HANDLE__ DSI handle. + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DSI_FLAG_TE : Tearing Effect Interrupt Flag + * @arg DSI_FLAG_ER : End of Refresh Interrupt Flag + * @arg DSI_FLAG_BUSY : Busy Flag + * @arg DSI_FLAG_PLLLS: PLL Lock Status + * @arg DSI_FLAG_PLLL : PLL Lock Interrupt Flag + * @arg DSI_FLAG_PLLU : PLL Unlock Interrupt Flag + * @arg DSI_FLAG_RRS : Regulator Ready Flag + * @arg DSI_FLAG_RR : Regulator Ready Interrupt Flag + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DSI_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->WISR & (__FLAG__)) + +/** + * @brief Clears the DSI pending flags. + * @param __HANDLE__ DSI handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DSI_FLAG_TE : Tearing Effect Interrupt Flag + * @arg DSI_FLAG_ER : End of Refresh Interrupt Flag + * @arg DSI_FLAG_PLLL : PLL Lock Interrupt Flag + * @arg DSI_FLAG_PLLU : PLL Unlock Interrupt Flag + * @arg DSI_FLAG_RR : Regulator Ready Interrupt Flag + * @retval None + */ +#define __HAL_DSI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->WIFCR = (__FLAG__)) + +/** + * @brief Enables the specified DSI interrupts. + * @param __HANDLE__ DSI handle. + * @param __INTERRUPT__ specifies the DSI interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg DSI_IT_TE : Tearing Effect Interrupt + * @arg DSI_IT_ER : End of Refresh Interrupt + * @arg DSI_IT_PLLL: PLL Lock Interrupt + * @arg DSI_IT_PLLU: PLL Unlock Interrupt + * @arg DSI_IT_RR : Regulator Ready Interrupt + * @retval None + */ +#define __HAL_DSI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WIER |= (__INTERRUPT__)) + +/** + * @brief Disables the specified DSI interrupts. + * @param __HANDLE__ DSI handle + * @param __INTERRUPT__ specifies the DSI interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg DSI_IT_TE : Tearing Effect Interrupt + * @arg DSI_IT_ER : End of Refresh Interrupt + * @arg DSI_IT_PLLL: PLL Lock Interrupt + * @arg DSI_IT_PLLU: PLL Unlock Interrupt + * @arg DSI_IT_RR : Regulator Ready Interrupt + * @retval None + */ +#define __HAL_DSI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WIER &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified DSI interrupt source is enabled or not. + * @param __HANDLE__ DSI handle + * @param __INTERRUPT__ specifies the DSI interrupt source to check. + * This parameter can be one of the following values: + * @arg DSI_IT_TE : Tearing Effect Interrupt + * @arg DSI_IT_ER : End of Refresh Interrupt + * @arg DSI_IT_PLLL: PLL Lock Interrupt + * @arg DSI_IT_PLLU: PLL Unlock Interrupt + * @arg DSI_IT_RR : Regulator Ready Interrupt + * @retval The state of INTERRUPT (SET or RESET). + */ +#define __HAL_DSI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->WIER & (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DSI_Exported_Functions DSI Exported Functions + * @{ + */ +/** @defgroup DSI_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +HAL_StatusTypeDef HAL_DSI_Init(DSI_HandleTypeDef *hdsi, DSI_PLLInitTypeDef *PLLInit); +HAL_StatusTypeDef HAL_DSI_DeInit(DSI_HandleTypeDef *hdsi); +void HAL_DSI_MspInit(DSI_HandleTypeDef *hdsi); +void HAL_DSI_MspDeInit(DSI_HandleTypeDef *hdsi); +HAL_StatusTypeDef HAL_DSI_ConfigErrorMonitor(DSI_HandleTypeDef *hdsi, uint32_t ActiveErrors); +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_DSI_RegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID, + pDSI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DSI_UnRegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup DSI_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +void HAL_DSI_IRQHandler(DSI_HandleTypeDef *hdsi); +void HAL_DSI_TearingEffectCallback(DSI_HandleTypeDef *hdsi); +void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi); +void HAL_DSI_ErrorCallback(DSI_HandleTypeDef *hdsi); +/** + * @} + */ + +/** @defgroup DSI_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_DSI_SetGenericVCID(DSI_HandleTypeDef *hdsi, uint32_t VirtualChannelID); +HAL_StatusTypeDef HAL_DSI_ConfigVideoMode(DSI_HandleTypeDef *hdsi, DSI_VidCfgTypeDef *VidCfg); +HAL_StatusTypeDef HAL_DSI_ConfigAdaptedCommandMode(DSI_HandleTypeDef *hdsi, DSI_CmdCfgTypeDef *CmdCfg); +HAL_StatusTypeDef HAL_DSI_ConfigCommand(DSI_HandleTypeDef *hdsi, DSI_LPCmdTypeDef *LPCmd); +HAL_StatusTypeDef HAL_DSI_ConfigFlowControl(DSI_HandleTypeDef *hdsi, uint32_t FlowControl); +HAL_StatusTypeDef HAL_DSI_ConfigPhyTimer(DSI_HandleTypeDef *hdsi, DSI_PHY_TimerTypeDef *PhyTimers); +HAL_StatusTypeDef HAL_DSI_ConfigHostTimeouts(DSI_HandleTypeDef *hdsi, DSI_HOST_TimeoutTypeDef *HostTimeouts); +HAL_StatusTypeDef HAL_DSI_Start(DSI_HandleTypeDef *hdsi); +HAL_StatusTypeDef HAL_DSI_Stop(DSI_HandleTypeDef *hdsi); +HAL_StatusTypeDef HAL_DSI_Refresh(DSI_HandleTypeDef *hdsi); +HAL_StatusTypeDef HAL_DSI_ColorMode(DSI_HandleTypeDef *hdsi, uint32_t ColorMode); +HAL_StatusTypeDef HAL_DSI_Shutdown(DSI_HandleTypeDef *hdsi, uint32_t Shutdown); +HAL_StatusTypeDef HAL_DSI_ShortWrite(DSI_HandleTypeDef *hdsi, + uint32_t ChannelID, + uint32_t Mode, + uint32_t Param1, + uint32_t Param2); +HAL_StatusTypeDef HAL_DSI_LongWrite(DSI_HandleTypeDef *hdsi, + uint32_t ChannelID, + uint32_t Mode, + uint32_t NbParams, + uint32_t Param1, + const uint8_t *ParametersTable); +HAL_StatusTypeDef HAL_DSI_Read(DSI_HandleTypeDef *hdsi, + uint32_t ChannelNbr, + uint8_t *Array, + uint32_t Size, + uint32_t Mode, + uint32_t DCSCmd, + uint8_t *ParametersTable); +HAL_StatusTypeDef HAL_DSI_EnterULPMData(DSI_HandleTypeDef *hdsi); +HAL_StatusTypeDef HAL_DSI_ExitULPMData(DSI_HandleTypeDef *hdsi); +HAL_StatusTypeDef HAL_DSI_EnterULPM(DSI_HandleTypeDef *hdsi); +HAL_StatusTypeDef HAL_DSI_ExitULPM(DSI_HandleTypeDef *hdsi); + +HAL_StatusTypeDef HAL_DSI_PatternGeneratorStart(DSI_HandleTypeDef *hdsi, uint32_t Mode, uint32_t Orientation); +HAL_StatusTypeDef HAL_DSI_PatternGeneratorStop(DSI_HandleTypeDef *hdsi); + +HAL_StatusTypeDef HAL_DSI_SetSlewRateAndDelayTuning(DSI_HandleTypeDef *hdsi, uint32_t CommDelay, uint32_t Lane, + uint32_t Value); +HAL_StatusTypeDef HAL_DSI_SetLowPowerRXFilter(DSI_HandleTypeDef *hdsi, uint32_t Frequency); +HAL_StatusTypeDef HAL_DSI_SetSDD(DSI_HandleTypeDef *hdsi, FunctionalState State); +HAL_StatusTypeDef HAL_DSI_SetLanePinsConfiguration(DSI_HandleTypeDef *hdsi, uint32_t CustomLane, uint32_t Lane, + FunctionalState State); +HAL_StatusTypeDef HAL_DSI_SetPHYTimings(DSI_HandleTypeDef *hdsi, uint32_t Timing, FunctionalState State, + uint32_t Value); +HAL_StatusTypeDef HAL_DSI_ForceTXStopMode(DSI_HandleTypeDef *hdsi, uint32_t Lane, FunctionalState State); +HAL_StatusTypeDef HAL_DSI_ForceRXLowPower(DSI_HandleTypeDef *hdsi, FunctionalState State); +HAL_StatusTypeDef HAL_DSI_ForceDataLanesInRX(DSI_HandleTypeDef *hdsi, FunctionalState State); +HAL_StatusTypeDef HAL_DSI_SetPullDown(DSI_HandleTypeDef *hdsi, FunctionalState State); +HAL_StatusTypeDef HAL_DSI_SetContentionDetectionOff(DSI_HandleTypeDef *hdsi, FunctionalState State); + +/** + * @} + */ + +/** @defgroup DSI_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * @{ + */ +uint32_t HAL_DSI_GetError(const DSI_HandleTypeDef *hdsi); +HAL_DSI_StateTypeDef HAL_DSI_GetState(const DSI_HandleTypeDef *hdsi); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DSI_Private_Constants DSI Private Constants + * @{ + */ +#define DSI_MAX_RETURN_PKT_SIZE (0x00000037U) /*!< Maximum return packet configuration */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DSI_Private_Macros DSI Private Macros + * @{ + */ +#define IS_DSI_PLL_NDIV(NDIV) ((10U <= (NDIV)) && ((NDIV) <= 125U)) +#define IS_DSI_PLL_IDF(IDF) (((IDF) == DSI_PLL_IN_DIV1) || \ + ((IDF) == DSI_PLL_IN_DIV2) || \ + ((IDF) == DSI_PLL_IN_DIV3) || \ + ((IDF) == DSI_PLL_IN_DIV4) || \ + ((IDF) == DSI_PLL_IN_DIV5) || \ + ((IDF) == DSI_PLL_IN_DIV6) || \ + ((IDF) == DSI_PLL_IN_DIV7)) +#define IS_DSI_PLL_ODF(ODF) (((ODF) == DSI_PLL_OUT_DIV1) || \ + ((ODF) == DSI_PLL_OUT_DIV2) || \ + ((ODF) == DSI_PLL_OUT_DIV4) || \ + ((ODF) == DSI_PLL_OUT_DIV8)) +#define IS_DSI_AUTO_CLKLANE_CONTROL(AutoClkLane) (((AutoClkLane) == DSI_AUTO_CLK_LANE_CTRL_DISABLE)\ + || ((AutoClkLane) == DSI_AUTO_CLK_LANE_CTRL_ENABLE)) +#define IS_DSI_NUMBER_OF_LANES(NumberOfLanes) (((NumberOfLanes) == DSI_ONE_DATA_LANE)\ + || ((NumberOfLanes) == DSI_TWO_DATA_LANES)) +#define IS_DSI_FLOW_CONTROL(FlowControl) (((FlowControl) | DSI_FLOW_CONTROL_ALL) == DSI_FLOW_CONTROL_ALL) +#define IS_DSI_COLOR_CODING(ColorCoding) ((ColorCoding) <= 5U) +#define IS_DSI_LOOSELY_PACKED(LooselyPacked) (((LooselyPacked) == DSI_LOOSELY_PACKED_ENABLE)\ + || ((LooselyPacked) == DSI_LOOSELY_PACKED_DISABLE)) +#define IS_DSI_DE_POLARITY(DataEnable) (((DataEnable) == DSI_DATA_ENABLE_ACTIVE_HIGH)\ + || ((DataEnable) == DSI_DATA_ENABLE_ACTIVE_LOW)) +#define IS_DSI_VSYNC_POLARITY(Vsync) (((Vsync) == DSI_VSYNC_ACTIVE_HIGH)\ + || ((Vsync) == DSI_VSYNC_ACTIVE_LOW)) +#define IS_DSI_HSYNC_POLARITY(Hsync) (((Hsync) == DSI_HSYNC_ACTIVE_HIGH)\ + || ((Hsync) == DSI_HSYNC_ACTIVE_LOW)) +#define IS_DSI_VIDEO_MODE_TYPE(VideoModeType) (((VideoModeType) == DSI_VID_MODE_NB_PULSES) || \ + ((VideoModeType) == DSI_VID_MODE_NB_EVENTS) || \ + ((VideoModeType) == DSI_VID_MODE_BURST)) +#define IS_DSI_COLOR_MODE(ColorMode) (((ColorMode) == DSI_COLOR_MODE_FULL)\ + || ((ColorMode) == DSI_COLOR_MODE_EIGHT)) +#define IS_DSI_SHUT_DOWN(ShutDown) (((ShutDown) == DSI_DISPLAY_ON) || ((ShutDown) == DSI_DISPLAY_OFF)) +#define IS_DSI_LP_COMMAND(LPCommand) (((LPCommand) == DSI_LP_COMMAND_DISABLE)\ + || ((LPCommand) == DSI_LP_COMMAND_ENABLE)) +#define IS_DSI_LP_HFP(LPHFP) (((LPHFP) == DSI_LP_HFP_DISABLE) || ((LPHFP) == DSI_LP_HFP_ENABLE)) +#define IS_DSI_LP_HBP(LPHBP) (((LPHBP) == DSI_LP_HBP_DISABLE) || ((LPHBP) == DSI_LP_HBP_ENABLE)) +#define IS_DSI_LP_VACTIVE(LPVActive) (((LPVActive) == DSI_LP_VACT_DISABLE)\ + || ((LPVActive) == DSI_LP_VACT_ENABLE)) +#define IS_DSI_LP_VFP(LPVFP) (((LPVFP) == DSI_LP_VFP_DISABLE) || ((LPVFP) == DSI_LP_VFP_ENABLE)) +#define IS_DSI_LP_VBP(LPVBP) (((LPVBP) == DSI_LP_VBP_DISABLE) || ((LPVBP) == DSI_LP_VBP_ENABLE)) +#define IS_DSI_LP_VSYNC(LPVSYNC) (((LPVSYNC) == DSI_LP_VSYNC_DISABLE)\ + || ((LPVSYNC) == DSI_LP_VSYNC_ENABLE)) +#define IS_DSI_FBTAA(FrameBTAAcknowledge) (((FrameBTAAcknowledge) == DSI_FBTAA_DISABLE)\ + || ((FrameBTAAcknowledge) == DSI_FBTAA_ENABLE)) +#define IS_DSI_TE_SOURCE(TESource) (((TESource) == DSI_TE_DSILINK) || ((TESource) == DSI_TE_EXTERNAL)) +#define IS_DSI_TE_POLARITY(TEPolarity) (((TEPolarity) == DSI_TE_RISING_EDGE)\ + || ((TEPolarity) == DSI_TE_FALLING_EDGE)) +#define IS_DSI_AUTOMATIC_REFRESH(AutomaticRefresh) (((AutomaticRefresh) == DSI_AR_DISABLE)\ + || ((AutomaticRefresh) == DSI_AR_ENABLE)) +#define IS_DSI_VS_POLARITY(VSPolarity) (((VSPolarity) == DSI_VSYNC_FALLING)\ + || ((VSPolarity) == DSI_VSYNC_RISING)) +#define IS_DSI_TE_ACK_REQUEST(TEAcknowledgeRequest) (((TEAcknowledgeRequest) == DSI_TE_ACKNOWLEDGE_DISABLE)\ + || ((TEAcknowledgeRequest) == DSI_TE_ACKNOWLEDGE_ENABLE)) +#define IS_DSI_ACK_REQUEST(AcknowledgeRequest) (((AcknowledgeRequest) == DSI_ACKNOWLEDGE_DISABLE)\ + || ((AcknowledgeRequest) == DSI_ACKNOWLEDGE_ENABLE)) +#define IS_DSI_LP_GSW0P(LP_GSW0P) (((LP_GSW0P) == DSI_LP_GSW0P_DISABLE)\ + || ((LP_GSW0P) == DSI_LP_GSW0P_ENABLE)) +#define IS_DSI_LP_GSW1P(LP_GSW1P) (((LP_GSW1P) == DSI_LP_GSW1P_DISABLE)\ + || ((LP_GSW1P) == DSI_LP_GSW1P_ENABLE)) +#define IS_DSI_LP_GSW2P(LP_GSW2P) (((LP_GSW2P) == DSI_LP_GSW2P_DISABLE)\ + || ((LP_GSW2P) == DSI_LP_GSW2P_ENABLE)) +#define IS_DSI_LP_GSR0P(LP_GSR0P) (((LP_GSR0P) == DSI_LP_GSR0P_DISABLE)\ + || ((LP_GSR0P) == DSI_LP_GSR0P_ENABLE)) +#define IS_DSI_LP_GSR1P(LP_GSR1P) (((LP_GSR1P) == DSI_LP_GSR1P_DISABLE)\ + || ((LP_GSR1P) == DSI_LP_GSR1P_ENABLE)) +#define IS_DSI_LP_GSR2P(LP_GSR2P) (((LP_GSR2P) == DSI_LP_GSR2P_DISABLE)\ + || ((LP_GSR2P) == DSI_LP_GSR2P_ENABLE)) +#define IS_DSI_LP_GLW(LP_GLW) (((LP_GLW) == DSI_LP_GLW_DISABLE)\ + || ((LP_GLW) == DSI_LP_GLW_ENABLE)) +#define IS_DSI_LP_DSW0P(LP_DSW0P) (((LP_DSW0P) == DSI_LP_DSW0P_DISABLE)\ + || ((LP_DSW0P) == DSI_LP_DSW0P_ENABLE)) +#define IS_DSI_LP_DSW1P(LP_DSW1P) (((LP_DSW1P) == DSI_LP_DSW1P_DISABLE)\ + || ((LP_DSW1P) == DSI_LP_DSW1P_ENABLE)) +#define IS_DSI_LP_DSR0P(LP_DSR0P) (((LP_DSR0P) == DSI_LP_DSR0P_DISABLE)\ + || ((LP_DSR0P) == DSI_LP_DSR0P_ENABLE)) +#define IS_DSI_LP_DLW(LP_DLW) (((LP_DLW) == DSI_LP_DLW_DISABLE)\ + || ((LP_DLW) == DSI_LP_DLW_ENABLE)) +#define IS_DSI_LP_MRDP(LP_MRDP) (((LP_MRDP) == DSI_LP_MRDP_DISABLE)\ + || ((LP_MRDP) == DSI_LP_MRDP_ENABLE)) +#define IS_DSI_SHORT_WRITE_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_SHORT_PKT_WRITE_P0) || \ + ((MODE) == DSI_DCS_SHORT_PKT_WRITE_P1) || \ + ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P0) || \ + ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P1) || \ + ((MODE) == DSI_GEN_SHORT_PKT_WRITE_P2)) +#define IS_DSI_LONG_WRITE_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_LONG_PKT_WRITE) || \ + ((MODE) == DSI_GEN_LONG_PKT_WRITE)) +#define IS_DSI_READ_PACKET_TYPE(MODE) (((MODE) == DSI_DCS_SHORT_PKT_READ) || \ + ((MODE) == DSI_GEN_SHORT_PKT_READ_P0) || \ + ((MODE) == DSI_GEN_SHORT_PKT_READ_P1) || \ + ((MODE) == DSI_GEN_SHORT_PKT_READ_P2)) +#define IS_DSI_COMMUNICATION_DELAY(CommDelay) (((CommDelay) == DSI_SLEW_RATE_HSTX) || \ + ((CommDelay) == DSI_SLEW_RATE_LPTX) || \ + ((CommDelay) == DSI_HS_DELAY)) +#define IS_DSI_LANE_GROUP(Lane) (((Lane) == DSI_CLOCK_LANE) || ((Lane) == DSI_DATA_LANES)) +#define IS_DSI_CUSTOM_LANE(CustomLane) (((CustomLane) == DSI_SWAP_LANE_PINS)\ + || ((CustomLane) == DSI_INVERT_HS_SIGNAL)) +#define IS_DSI_LANE(Lane) (((Lane) == DSI_CLOCK_LANE) || \ + ((Lane) == DSI_DATA_LANE0) || ((Lane) == DSI_DATA_LANE1)) +#define IS_DSI_PHY_TIMING(Timing) (((Timing) == DSI_TCLK_POST ) || \ + ((Timing) == DSI_TLPX_CLK ) || \ + ((Timing) == DSI_THS_EXIT ) || \ + ((Timing) == DSI_TLPX_DATA ) || \ + ((Timing) == DSI_THS_ZERO ) || \ + ((Timing) == DSI_THS_TRAIL ) || \ + ((Timing) == DSI_THS_PREPARE ) || \ + ((Timing) == DSI_TCLK_ZERO ) || \ + ((Timing) == DSI_TCLK_PREPARE)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* DSI */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DSI_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth.h new file mode 100644 index 0000000..726127e --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth.h @@ -0,0 +1,1849 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_eth.h + * @author MCD Application Team + * @brief Header file of ETH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_ETH_H +#define STM32H7xx_HAL_ETH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +#if defined(ETH) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup ETH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +#ifndef ETH_TX_DESC_CNT +#define ETH_TX_DESC_CNT 4U +#endif /* ETH_TX_DESC_CNT */ + +#ifndef ETH_RX_DESC_CNT +#define ETH_RX_DESC_CNT 4U +#endif /* ETH_RX_DESC_CNT */ + +#ifndef ETH_SWRESET_TIMEOUT +#define ETH_SWRESET_TIMEOUT 500U +#endif /* ETH_SWRESET_TIMEOUT */ + +#ifndef ETH_MDIO_BUS_TIMEOUT +#define ETH_MDIO_BUS_TIMEOUT 1000U +#endif /* ETH_MDIO_BUS_TIMEOUT */ + +#ifndef ETH_MAC_US_TICK +#define ETH_MAC_US_TICK 1000000U +#endif /* ETH_MAC_US_TICK */ + +/*********************** Descriptors struct def section ************************/ +/** @defgroup ETH_Exported_Types ETH Exported Types + * @{ + */ + +/** + * @brief ETH DMA Descriptor structure definition + */ +typedef struct +{ + __IO uint32_t DESC0; + __IO uint32_t DESC1; + __IO uint32_t DESC2; + __IO uint32_t DESC3; + uint32_t BackupAddr0; /* used to store rx buffer 1 address */ + uint32_t BackupAddr1; /* used to store rx buffer 2 address */ +} ETH_DMADescTypeDef; +/** + * + */ + +/** + * @brief ETH Buffers List structure definition + */ +typedef struct __ETH_BufferTypeDef +{ + uint8_t *buffer; /*gState = HAL_ETH_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_ETH_STATE_RESET; \ + } while(0) +#endif /*USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @brief Enables the specified ETHERNET DMA interrupts. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be + * enabled @ref ETH_DMA_Interrupts + * @retval None + */ +#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMACIER |= (__INTERRUPT__)) + +/** + * @brief Disables the specified ETHERNET DMA interrupts. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be + * disabled. @ref ETH_DMA_Interrupts + * @retval None + */ +#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMACIER &= ~(__INTERRUPT__)) + +/** + * @brief Gets the ETHERNET DMA IT source enabled or disabled. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the interrupt source to get . @ref ETH_DMA_Interrupts + * @retval The ETH DMA IT Source enabled or disabled + */ +#define __HAL_ETH_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->DMACIER & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Gets the ETHERNET DMA IT pending bit. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the interrupt source to get . @ref ETH_DMA_Interrupts + * @retval The state of ETH DMA IT (SET or RESET) + */ +#define __HAL_ETH_DMA_GET_IT(__HANDLE__, __INTERRUPT__) \ + (((__HANDLE__)->Instance->DMACSR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clears the ETHERNET DMA IT pending bit. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts + * @retval None + */ +#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMACSR = (__INTERRUPT__)) + +/** + * @brief Checks whether the specified ETHERNET DMA flag is set or not. + * @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Status_Flags + * @retval The state of ETH DMA FLAG (SET or RESET). + */ +#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMACSR &( __FLAG__)) == ( __FLAG__)) + +/** + * @brief Clears the specified ETHERNET DMA flag. + * @param __HANDLE__: ETH Handle + * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Status_Flags + * @retval The state of ETH DMA FLAG (SET or RESET). + */ +#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMACSR = ( __FLAG__)) + +/** + * @brief Enables the specified ETHERNET MAC interrupts. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be + * enabled @ref ETH_MAC_Interrupts + * @retval None + */ + +#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIER |= (__INTERRUPT__)) + +/** + * @brief Disables the specified ETHERNET MAC interrupts. + * @param __HANDLE__ : ETH Handle + * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be + * enabled @ref ETH_MAC_Interrupts + * @retval None + */ +#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIER &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified ETHERNET MAC flag is set or not. + * @param __HANDLE__: ETH Handle + * @param __INTERRUPT__: specifies the flag to check. @ref ETH_MAC_Interrupts + * @retval The state of ETH MAC IT (SET or RESET). + */ +#define __HAL_ETH_MAC_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MACISR &\ + ( __INTERRUPT__)) == ( __INTERRUPT__)) + +/*!< External interrupt line 86 Connected to the ETH wakeup EXTI Line */ +#define ETH_WAKEUP_EXTI_LINE 0x00400000U /* !< 86 - 64 = 22 */ + +/** + * @brief Enable the ETH WAKEUP Exti Line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be enabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None. + */ +#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT(__EXTI_LINE__) (EXTI_D1->IMR3 |= (__EXTI_LINE__)) + +/** + * @brief checks whether the specified ETH WAKEUP Exti interrupt flag is set or not. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be cleared. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval EXTI ETH WAKEUP Line Status. + */ +#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI_D1->PR3 & (__EXTI_LINE__)) + +/** + * @brief Clear the ETH WAKEUP Exti flag. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be cleared. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None. + */ +#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI_D1->PR3 = (__EXTI_LINE__)) + +#if defined(DUAL_CORE) +/** + * @brief Enable the ETH WAKEUP Exti Line by Core2. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be enabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None. + */ +#define __HAL_ETH_WAKEUP_EXTID2_ENABLE_IT(__EXTI_LINE__) (EXTI_D2->IMR3 |= (__EXTI_LINE__)) + +/** + * @brief checks whether the specified ETH WAKEUP Exti interrupt flag is set or not. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be cleared. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval EXTI ETH WAKEUP Line Status. + */ +#define __HAL_ETH_WAKEUP_EXTID2_GET_FLAG(__EXTI_LINE__) (EXTI_D2->PR3 & (__EXTI_LINE__)) + +/** + * @brief Clear the ETH WAKEUP Exti flag. + * @param __EXTI_LINE__: specifies the ETH WAKEUP Exti sources to be cleared. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None. + */ +#define __HAL_ETH_WAKEUP_EXTID2_CLEAR_FLAG(__EXTI_LINE__) (EXTI_D2->PR3 = (__EXTI_LINE__)) +#endif /* DUAL_CORE */ + +/** + * @brief enable rising edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE(__EXTI_LINE__) (EXTI->FTSR3 &= ~(__EXTI_LINE__)); \ + (EXTI->RTSR3 |= (__EXTI_LINE__)) + +/** + * @brief enable falling edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR3 &= ~(__EXTI_LINE__));\ + (EXTI->FTSR3 |= (__EXTI_LINE__)) + +/** + * @brief enable falling edge interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR3 |= (__EXTI_LINE__));\ + (EXTI->FTSR3 |= (__EXTI_LINE__)) + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the ETH WAKEUP EXTI sources to be disabled. + * @arg ETH_WAKEUP_EXTI_LINE + * @retval None + */ +#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER3 |= (__EXTI_LINE__)) +#define __HAL_ETH_GET_PTP_CONTROL(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->MACTSCR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) +#define __HAL_ETH_SET_PTP_CONTROL(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->MACTSCR |= (__FLAG__)) + +/** + * @} + */ + +/* Include ETH HAL Extension module */ +#include "stm32h7xx_hal_eth_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup ETH_Exported_Functions + * @{ + */ + +/** @addtogroup ETH_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de initialization functions **********************************/ +HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth); +void HAL_ETH_MspInit(ETH_HandleTypeDef *heth); +void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, + pETH_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup ETH_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_Start_IT(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_Stop_IT(ETH_HandleTypeDef *heth); + +HAL_StatusTypeDef HAL_ETH_ReadData(ETH_HandleTypeDef *heth, void **pAppBuff); +HAL_StatusTypeDef HAL_ETH_RegisterRxAllocateCallback(ETH_HandleTypeDef *heth, + pETH_rxAllocateCallbackTypeDef rxAllocateCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterRxAllocateCallback(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_RegisterRxLinkCallback(ETH_HandleTypeDef *heth, pETH_rxLinkCallbackTypeDef rxLinkCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterRxLinkCallback(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_GetRxDataErrorCode(const ETH_HandleTypeDef *heth, uint32_t *pErrorCode); +HAL_StatusTypeDef HAL_ETH_RegisterTxFreeCallback(ETH_HandleTypeDef *heth, pETH_txFreeCallbackTypeDef txFreeCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterTxFreeCallback(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_ReleaseTxPacket(ETH_HandleTypeDef *heth); + +#ifdef HAL_ETH_USE_PTP +HAL_StatusTypeDef HAL_ETH_PTP_SetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig); +HAL_StatusTypeDef HAL_ETH_PTP_GetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig); +HAL_StatusTypeDef HAL_ETH_PTP_SetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time); +HAL_StatusTypeDef HAL_ETH_PTP_GetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time); +HAL_StatusTypeDef HAL_ETH_PTP_AddTimeOffset(ETH_HandleTypeDef *heth, ETH_PtpUpdateTypeDef ptpoffsettype, + ETH_TimeTypeDef *timeoffset); +HAL_StatusTypeDef HAL_ETH_PTP_InsertTxTimestamp(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_PTP_GetTxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp); +HAL_StatusTypeDef HAL_ETH_PTP_GetRxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp); +HAL_StatusTypeDef HAL_ETH_RegisterTxPtpCallback(ETH_HandleTypeDef *heth, pETH_txPtpCallbackTypeDef txPtpCallback); +HAL_StatusTypeDef HAL_ETH_UnRegisterTxPtpCallback(ETH_HandleTypeDef *heth); +#endif /* HAL_ETH_USE_PTP */ + +HAL_StatusTypeDef HAL_ETH_Transmit(ETH_HandleTypeDef *heth, ETH_TxPacketConfigTypeDef *pTxConfig, uint32_t Timeout); +HAL_StatusTypeDef HAL_ETH_Transmit_IT(ETH_HandleTypeDef *heth, ETH_TxPacketConfigTypeDef *pTxConfig); + +HAL_StatusTypeDef HAL_ETH_WritePHYRegister(const ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t RegValue); +HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t *pRegValue); + +void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth); +void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_PMTCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_EEECallback(ETH_HandleTypeDef *heth); +void HAL_ETH_WakeUpCallback(ETH_HandleTypeDef *heth); +void HAL_ETH_RxAllocateCallback(uint8_t **buff); +void HAL_ETH_RxLinkCallback(void **pStart, void **pEnd, uint8_t *buff, uint16_t Length); +void HAL_ETH_TxFreeCallback(uint32_t *buff); +void HAL_ETH_TxPtpCallback(uint32_t *buff, ETH_TimeStampTypeDef *timestamp); +/** + * @} + */ + +/** @addtogroup ETH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions **********************************************/ +/* MAC & DMA Configuration APIs **********************************************/ +HAL_StatusTypeDef HAL_ETH_GetMACConfig(const ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf); +HAL_StatusTypeDef HAL_ETH_GetDMAConfig(const ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf); +HAL_StatusTypeDef HAL_ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf); +HAL_StatusTypeDef HAL_ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf); +void HAL_ETH_SetMDIOClockRange(ETH_HandleTypeDef *heth); + +/* MAC VLAN Processing APIs ************************************************/ +void HAL_ETH_SetRxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t ComparisonBits, + uint32_t VLANIdentifier); + +/* MAC L2 Packet Filtering APIs **********************************************/ +HAL_StatusTypeDef HAL_ETH_GetMACFilterConfig(const ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig); +HAL_StatusTypeDef HAL_ETH_SetMACFilterConfig(ETH_HandleTypeDef *heth, const ETH_MACFilterConfigTypeDef *pFilterConfig); +HAL_StatusTypeDef HAL_ETH_SetHashTable(ETH_HandleTypeDef *heth, uint32_t *pHashTable); +HAL_StatusTypeDef HAL_ETH_SetSourceMACAddrMatch(const ETH_HandleTypeDef *heth, uint32_t AddrNbr, + const uint8_t *pMACAddr); + +/* MAC Power Down APIs *****************************************************/ +void HAL_ETH_EnterPowerDownMode(ETH_HandleTypeDef *heth, + const ETH_PowerDownConfigTypeDef *pPowerDownConfig); +void HAL_ETH_ExitPowerDownMode(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETH_SetWakeUpFilter(ETH_HandleTypeDef *heth, uint32_t *pFilter, uint32_t Count); + +/** + * @} + */ + +/** @addtogroup ETH_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State functions **************************************************/ +HAL_ETH_StateTypeDef HAL_ETH_GetState(const ETH_HandleTypeDef *heth); +uint32_t HAL_ETH_GetError(const ETH_HandleTypeDef *heth); +uint32_t HAL_ETH_GetDMAError(const ETH_HandleTypeDef *heth); +uint32_t HAL_ETH_GetMACError(const ETH_HandleTypeDef *heth); +uint32_t HAL_ETH_GetMACWakeUpSource(const ETH_HandleTypeDef *heth); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_ETH_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h new file mode 100644 index 0000000..4e229bc --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h @@ -0,0 +1,366 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_eth_ex.h + * @author MCD Application Team + * @brief Header file of ETH HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_ETH_EX_H +#define STM32H7xx_HAL_ETH_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(ETH) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup ETHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ETHEx_Exported_Types ETHEx Exported Types + * @{ + */ + +/** + * @brief ETH RX VLAN structure definition + */ +typedef struct +{ + FunctionalState InnerVLANTagInStatus; /*!< Enables or disables Inner VLAN Tag in Rx Status */ + + uint32_t StripInnerVLANTag; /*!< Sets the Inner VLAN Tag Stripping on Receive + This parameter can be a value of + @ref ETHEx_Rx_Inner_VLAN_Tag_Stripping */ + + FunctionalState InnerVLANTag; /*!< Enables or disables Inner VLAN Tag */ + + FunctionalState DoubleVLANProcessing; /*!< Enable or Disable double VLAN processing */ + + FunctionalState VLANTagHashTableMatch; /*!< Enable or Disable VLAN Tag Hash Table Match */ + + FunctionalState VLANTagInStatus; /*!< Enable or Disable VLAN Tag in Rx status */ + + uint32_t StripVLANTag; /*!< Set the VLAN Tag Stripping on Receive + This parameter can be a value of @ref ETHEx_Rx_VLAN_Tag_Stripping */ + + uint32_t VLANTypeCheck; /*!< Enable or Disable VLAN Type Check + This parameter can be a value of @ref ETHEx_VLAN_Type_Check */ + + FunctionalState VLANTagInverceMatch; /*!< Enable or disable VLAN Tag Inverse Match */ +} ETH_RxVLANConfigTypeDef; +/** + * + */ + +/** + * @brief ETH TX VLAN structure definition + */ +typedef struct +{ + FunctionalState SourceTxDesc; /*!< Enable or Disable VLAN tag source from DMA tx descriptors */ + + FunctionalState SVLANType; /*!< Enable or Disable insertion of SVLAN type */ + + uint32_t VLANTagControl; /*!< Sets the VLAN tag control in tx packets + This parameter can be a value of @ref ETHEx_VLAN_Tag_Control */ +} ETH_TxVLANConfigTypeDef; +/** + * + */ + +/** + * @brief ETH L3 filter structure definition + */ +typedef struct +{ + uint32_t Protocol; /*!< Sets the L3 filter protocol to IPv4 or IPv6 + This parameter can be a value of @ref ETHEx_L3_Protocol */ + + uint32_t SrcAddrFilterMatch; /*!< Sets the L3 filter source address match + This parameter can be a value of @ref ETHEx_L3_Source_Match */ + + uint32_t DestAddrFilterMatch; /*!< Sets the L3 filter destination address match + This parameter can be a value of @ref ETHEx_L3_Destination_Match */ + + uint32_t SrcAddrHigherBitsMatch; /*!< Sets the L3 filter source address higher bits match + This parameter can be a value from 0 to 31 */ + + uint32_t DestAddrHigherBitsMatch; /*!< Sets the L3 filter destination address higher bits match + This parameter can be a value from 0 to 31 */ + + uint32_t Ip4SrcAddr; /*!< Sets the L3 filter IPv4 source address if IPv4 protocol is used + This parameter can be a value from 0x0 to 0xFFFFFFFF */ + + uint32_t Ip4DestAddr; /*!< Sets the L3 filter IPv4 destination address if IPv4 protocol is used + This parameter can be a value from 0 to 0xFFFFFFFF */ + + uint32_t Ip6Addr[4]; /*!< Sets the L3 filter IPv6 address if IPv6 protocol is used + This parameter must be a table of 4 words (4* 32 bits) */ +} ETH_L3FilterConfigTypeDef; +/** + * + */ + +/** + * @brief ETH L4 filter structure definition + */ +typedef struct +{ + uint32_t Protocol; /*!< Sets the L4 filter protocol to TCP or UDP + This parameter can be a value of @ref ETHEx_L4_Protocol */ + + uint32_t SrcPortFilterMatch; /*!< Sets the L4 filter source port match + This parameter can be a value of @ref ETHEx_L4_Source_Match */ + + uint32_t DestPortFilterMatch; /*!< Sets the L4 filter destination port match + This parameter can be a value of @ref ETHEx_L4_Destination_Match */ + + uint32_t SourcePort; /*!< Sets the L4 filter source port + This parameter must be a value from 0x0 to 0xFFFF */ + + uint32_t DestinationPort; /*!< Sets the L4 filter destination port + This parameter must be a value from 0x0 to 0xFFFF */ +} ETH_L4FilterConfigTypeDef; +/** + * + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup ETHEx_Exported_Constants ETHEx Exported Constants + * @{ + */ + +/** @defgroup ETHEx_LPI_Event ETHEx LPI Event + * @{ + */ +#define ETH_TX_LPI_ENTRY ETH_MACLCSR_TLPIEN +#define ETH_TX_LPI_EXIT ETH_MACLCSR_TLPIEX +#define ETH_RX_LPI_ENTRY ETH_MACLCSR_RLPIEN +#define ETH_RX_LPI_EXIT ETH_MACLCSR_RLPIEX +/** + * @} + */ + +/** @defgroup ETHEx_L3_Filter ETHEx L3 Filter + * @{ + */ +#define ETH_L3_FILTER_0 0x00000000U +#define ETH_L3_FILTER_1 0x0000000CU +/** + * @} + */ + +/** @defgroup ETHEx_L4_Filter ETHEx L4 Filter + * @{ + */ +#define ETH_L4_FILTER_0 0x00000000U +#define ETH_L4_FILTER_1 0x0000000CU +/** + * @} + */ + +/** @defgroup ETHEx_L3_Protocol ETHEx L3 Protocol + * @{ + */ +#define ETH_L3_IPV6_MATCH ETH_MACL3L4CR_L3PEN +#define ETH_L3_IPV4_MATCH 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L3_Source_Match ETHEx L3 Source Match + * @{ + */ +#define ETH_L3_SRC_ADDR_PERFECT_MATCH_ENABLE ETH_MACL3L4CR_L3SAM +#define ETH_L3_SRC_ADDR_INVERSE_MATCH_ENABLE (ETH_MACL3L4CR_L3SAM | ETH_MACL3L4CR_L3SAIM) +#define ETH_L3_SRC_ADDR_MATCH_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L3_Destination_Match ETHEx L3 Destination Match + * @{ + */ +#define ETH_L3_DEST_ADDR_PERFECT_MATCH_ENABLE ETH_MACL3L4CR_L3DAM +#define ETH_L3_DEST_ADDR_INVERSE_MATCH_ENABLE (ETH_MACL3L4CR_L3DAM | ETH_MACL3L4CR_L3DAIM) +#define ETH_L3_DEST_ADDR_MATCH_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L4_Protocol ETHEx L4 Protocol + * @{ + */ +#define ETH_L4_UDP_MATCH ETH_MACL3L4CR_L4PEN +#define ETH_L4_TCP_MATCH 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L4_Source_Match ETHEx L4 Source Match + * @{ + */ +#define ETH_L4_SRC_PORT_PERFECT_MATCH_ENABLE ETH_MACL3L4CR_L4SPM +#define ETH_L4_SRC_PORT_INVERSE_MATCH_ENABLE (ETH_MACL3L4CR_L4SPM |ETH_MACL3L4CR_L4SPIM) +#define ETH_L4_SRC_PORT_MATCH_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_L4_Destination_Match ETHEx L4 Destination Match + * @{ + */ +#define ETH_L4_DEST_PORT_PERFECT_MATCH_ENABLE ETH_MACL3L4CR_L4DPM +#define ETH_L4_DEST_PORT_INVERSE_MATCH_ENABLE (ETH_MACL3L4CR_L4DPM | ETH_MACL3L4CR_L4DPIM) +#define ETH_L4_DEST_PORT_MATCH_DISABLE 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_Rx_Inner_VLAN_Tag_Stripping ETHEx Rx Inner VLAN Tag Stripping + * @{ + */ +#define ETH_INNERVLANTAGRXSTRIPPING_NONE ETH_MACVTR_EIVLS_DONOTSTRIP +#define ETH_INNERVLANTAGRXSTRIPPING_IFPASS ETH_MACVTR_EIVLS_STRIPIFPASS +#define ETH_INNERVLANTAGRXSTRIPPING_IFFAILS ETH_MACVTR_EIVLS_STRIPIFFAILS +#define ETH_INNERVLANTAGRXSTRIPPING_ALWAYS ETH_MACVTR_EIVLS_ALWAYSSTRIP +/** + * @} + */ + +/** @defgroup ETHEx_Rx_VLAN_Tag_Stripping ETHEx Rx VLAN Tag Stripping + * @{ + */ +#define ETH_VLANTAGRXSTRIPPING_NONE ETH_MACVTR_EVLS_DONOTSTRIP +#define ETH_VLANTAGRXSTRIPPING_IFPASS ETH_MACVTR_EVLS_STRIPIFPASS +#define ETH_VLANTAGRXSTRIPPING_IFFAILS ETH_MACVTR_EVLS_STRIPIFFAILS +#define ETH_VLANTAGRXSTRIPPING_ALWAYS ETH_MACVTR_EVLS_ALWAYSSTRIP +/** + * @} + */ + +/** @defgroup ETHEx_VLAN_Type_Check ETHEx VLAN Type Check + * @{ + */ +#define ETH_VLANTYPECHECK_DISABLE ETH_MACVTR_DOVLTC +#define ETH_VLANTYPECHECK_SVLAN (ETH_MACVTR_ERSVLM | ETH_MACVTR_ESVL) +#define ETH_VLANTYPECHECK_CVLAN 0x00000000U +/** + * @} + */ + +/** @defgroup ETHEx_VLAN_Tag_Control ETHEx_VLAN_Tag_Control + * @{ + */ +#define ETH_VLANTAGCONTROL_NONE (ETH_MACVIR_VLP | ETH_MACVIR_VLC_NOVLANTAG) +#define ETH_VLANTAGCONTROL_DELETE (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGDELETE) +#define ETH_VLANTAGCONTROL_INSERT (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGINSERT) +#define ETH_VLANTAGCONTROL_REPLACE (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGREPLACE) +/** + * @} + */ + +/** @defgroup ETHEx_Tx_VLAN_Tag ETHEx Tx VLAN Tag + * @{ + */ +#define ETH_INNER_TX_VLANTAG 0x00000001U +#define ETH_OUTER_TX_VLANTAG 0x00000000U +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ETHEx_Exported_Functions + * @{ + */ + +/** @addtogroup ETHEx_Exported_Functions_Group1 + * @{ + */ +/* MAC ARP Offloading APIs ***************************************************/ +void HAL_ETHEx_EnableARPOffload(ETH_HandleTypeDef *heth); +void HAL_ETHEx_DisableARPOffload(ETH_HandleTypeDef *heth); +void HAL_ETHEx_SetARPAddressMatch(ETH_HandleTypeDef *heth, uint32_t IpAddress); + +/* MAC L3 L4 Filtering APIs ***************************************************/ +void HAL_ETHEx_EnableL3L4Filtering(ETH_HandleTypeDef *heth); +void HAL_ETHEx_DisableL3L4Filtering(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETHEx_GetL3FilterConfig(const ETH_HandleTypeDef *heth, uint32_t Filter, + ETH_L3FilterConfigTypeDef *pL3FilterConfig); +HAL_StatusTypeDef HAL_ETHEx_GetL4FilterConfig(const ETH_HandleTypeDef *heth, uint32_t Filter, + ETH_L4FilterConfigTypeDef *pL4FilterConfig); +HAL_StatusTypeDef HAL_ETHEx_SetL3FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, + const ETH_L3FilterConfigTypeDef *pL3FilterConfig); +HAL_StatusTypeDef HAL_ETHEx_SetL4FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, + const ETH_L4FilterConfigTypeDef *pL4FilterConfig); + +/* MAC VLAN Processing APIs ************************************************/ +void HAL_ETHEx_EnableVLANProcessing(ETH_HandleTypeDef *heth); +void HAL_ETHEx_DisableVLANProcessing(ETH_HandleTypeDef *heth); +HAL_StatusTypeDef HAL_ETHEx_GetRxVLANConfig(const ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig); +HAL_StatusTypeDef HAL_ETHEx_SetRxVLANConfig(ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig); +void HAL_ETHEx_SetVLANHashTable(ETH_HandleTypeDef *heth, uint32_t VLANHashTable); +HAL_StatusTypeDef HAL_ETHEx_GetTxVLANConfig(const ETH_HandleTypeDef *heth, uint32_t VLANTag, + ETH_TxVLANConfigTypeDef *pVlanConfig); +HAL_StatusTypeDef HAL_ETHEx_SetTxVLANConfig(ETH_HandleTypeDef *heth, uint32_t VLANTag, + const ETH_TxVLANConfigTypeDef *pVlanConfig); +void HAL_ETHEx_SetTxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t VLANTag, uint32_t VLANIdentifier); + +/* Energy Efficient Ethernet APIs *********************************************/ +void HAL_ETHEx_EnterLPIMode(ETH_HandleTypeDef *heth, FunctionalState TxAutomate, + FunctionalState TxClockStop); +void HAL_ETHEx_ExitLPIMode(ETH_HandleTypeDef *heth); +uint32_t HAL_ETHEx_GetMACLPIEvent(const ETH_HandleTypeDef *heth); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_ETH_EX_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h new file mode 100644 index 0000000..91d7d95 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h @@ -0,0 +1,537 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_EXTI_H +#define STM32H7xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ + + uint32_t PendClearSource; /*!< Specifies the event pending clear source for D3/SRD + domain. This parameter can be a value of @ref + EXTI_PendClear_Source */ + +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x00U) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x01U) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x02U) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x03U) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x04U) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x05U) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x06U) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x07U) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x08U) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x09U) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0AU) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0BU) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0CU) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0DU) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0EU) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0FU) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x10U) +#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x11U) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x12U) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x13U) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x14U) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x15U) +#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x16U) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x17U) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x18U) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x19U) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1CU) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1DU) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1EU) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1FU) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x00U) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x01U) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x02U) +#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x03U) +#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x04U) +#define EXTI_LINE_37 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x05U) +#define EXTI_LINE_38 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x06U) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x07U) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x08U) +#define EXTI_LINE_41 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x09U) +#define EXTI_LINE_42 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0AU) +#define EXTI_LINE_43 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0BU) +#if !defined(USB2_OTG_FS) +#define EXTI_LINE_44 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0CU) +#else +#define EXTI_LINE_44 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0CU) +#endif /* USB2_OTG_FS */ +#define EXTI_LINE_45 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0DU) +#if defined(DSI) +#define EXTI_LINE_46 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0EU) +#else +#define EXTI_LINE_46 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0EU) +#endif /* DSI */ +#define EXTI_LINE_47 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0FU) +#define EXTI_LINE_48 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x10U) +#define EXTI_LINE_49 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x11U) +#define EXTI_LINE_50 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x12U) +#define EXTI_LINE_51 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x13U) +#if defined(LPTIM4) +#define EXTI_LINE_52 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x14U) +#else +#define EXTI_LINE_52 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x14U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define EXTI_LINE_53 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x15U) +#else +#define EXTI_LINE_53 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x15U) +#endif /*LPTIM5*/ +#define EXTI_LINE_54 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x16U) +#define EXTI_LINE_55 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x17U) +#define EXTI_LINE_56 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x18U) +#if defined(EXTI_IMR2_IM57) +#define EXTI_LINE_57 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x19U) +#else +#define EXTI_LINE_57 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x19U) +#endif /*EXTI_IMR2_IM57*/ +#define EXTI_LINE_58 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU) +#if defined(EXTI_IMR2_IM59) +#define EXTI_LINE_59 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU) +#else +#define EXTI_LINE_59 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x1BU) +#endif /*EXTI_IMR2_IM59*/ +#define EXTI_LINE_60 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1CU) +#define EXTI_LINE_61 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1DU) +#define EXTI_LINE_62 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1EU) +#define EXTI_LINE_63 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1FU) +#define EXTI_LINE_64 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x00U) +#define EXTI_LINE_65 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x01U) +#define EXTI_LINE_66 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x02U) +#define EXTI_LINE_67 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x03U) +#define EXTI_LINE_68 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x04U) +#define EXTI_LINE_69 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x05U) +#define EXTI_LINE_70 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x06U) +#define EXTI_LINE_71 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x07U) +#define EXTI_LINE_72 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x08U) +#define EXTI_LINE_73 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x09U) +#define EXTI_LINE_74 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0AU) +#if defined(ADC3) +#define EXTI_LINE_75 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0BU) +#else +#define EXTI_LINE_75 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE | 0x0BU) +#endif /* ADC3 */ +#if defined(SAI4) +#define EXTI_LINE_76 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0CU) +#else +#define EXTI_LINE_76 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE | 0x0CU) +#endif /* SAI4 */ +#if defined (DUAL_CORE) +#define EXTI_LINE_77 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x0DU) +#define EXTI_LINE_78 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x0EU) +#define EXTI_LINE_79 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x0FU) +#define EXTI_LINE_80 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x10U) +#else +#define EXTI_LINE_77 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0DU) +#define EXTI_LINE_78 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0EU) +#define EXTI_LINE_79 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0FU) +#define EXTI_LINE_80 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x10U) +#endif /* DUAL_CORE */ +#define EXTI_LINE_81 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x11U) +#if defined (DUAL_CORE) +#define EXTI_LINE_82 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x12U) +#else +#define EXTI_LINE_82 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x12U) +#endif /* DUAL_CORE */ +#define EXTI_LINE_83 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x13U) +#if defined (DUAL_CORE) +#define EXTI_LINE_84 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x14U) +#else +#define EXTI_LINE_84 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x14U) +#endif /* DUAL_CORE */ +#define EXTI_LINE_85 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x15U) +#if defined(ETH) +#define EXTI_LINE_86 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x16U) +#else +#define EXTI_LINE_86 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x16U) +#endif /* ETH */ +#define EXTI_LINE_87 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x17U) +#if defined(DTS) +#define EXTI_LINE_88 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL | 0x18U) +#endif /* DTS */ +#if defined(EXTI_IMR3_IM89) +#define EXTI_LINE_89 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x19U) +#endif /*EXTI_IMR3_IM89*/ +#if defined(EXTI_IMR3_IM90) +#define EXTI_LINE_90 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU) +#endif /*EXTI_IMR3_IM90*/ +#if defined(I2C5) +#define EXTI_LINE_91 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU) +#endif /*I2C5*/ + +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000U +#define EXTI_MODE_INTERRUPT 0x00000001U +#define EXTI_MODE_EVENT 0x00000002U +#if defined(DUAL_CORE) +#define EXTI_MODE_CORE1_INTERRUPT EXTI_MODE_INTERRUPT +#define EXTI_MODE_CORE1_EVENT EXTI_MODE_EVENT +#define EXTI_MODE_CORE2_INTERRUPT 0x00000010U +#define EXTI_MODE_CORE2_EVENT 0x00000020U +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000U +#define EXTI_TRIGGER_RISING 0x00000001U +#define EXTI_TRIGGER_FALLING 0x00000002U +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000U +#define EXTI_GPIOB 0x00000001U +#define EXTI_GPIOC 0x00000002U +#define EXTI_GPIOD 0x00000003U +#define EXTI_GPIOE 0x00000004U +#define EXTI_GPIOF 0x00000005U +#define EXTI_GPIOG 0x00000006U +#define EXTI_GPIOH 0x00000007U +#if defined(GPIOI) +#define EXTI_GPIOI 0x00000008U +#endif /*GPIOI*/ +#define EXTI_GPIOJ 0x00000009U +#define EXTI_GPIOK 0x0000000AU + +/** + * @} + */ + +/** @defgroup EXTI_PendClear_Source EXTI PendClear Source + * @brief + * @{ + */ +#define EXTI_D3_PENDCLR_SRC_NONE 0x00000000U /*!< No D3 domain pendclear source , PMRx register to be set to zero */ +#define EXTI_D3_PENDCLR_SRC_DMACH6 0x00000001U /*!< DMA ch6 event selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#define EXTI_D3_PENDCLR_SRC_DMACH7 0x00000002U /*!< DMA ch7 event selected as D3 domain pendclear source, PMRx register to be set to 1*/ +#if defined (LPTIM4) +#define EXTI_D3_PENDCLR_SRC_LPTIM4 0x00000003U /*!< LPTIM4 out selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#else +#define EXTI_D3_PENDCLR_SRC_LPTIM2 0x00000003U /*!< LPTIM2 out selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#endif +#if defined (LPTIM5) +#define EXTI_D3_PENDCLR_SRC_LPTIM5 0x00000004U /*!< LPTIM5 out selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#else +#define EXTI_D3_PENDCLR_SRC_LPTIM3 0x00000004U /*!< LPTIM3 out selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24U +#define EXTI_DIRECT (0x01UL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02UL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04UL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08UL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Event presence definition + */ +#define EXTI_EVENT_PRESENCE_SHIFT 28U +#define EXTI_EVENT (0x01UL << EXTI_EVENT_PRESENCE_SHIFT) +#define EXTI_EVENT_PRESENCE_MASK (EXTI_EVENT) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16U +#define EXTI_REG1 (0x00UL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01UL << EXTI_REG_SHIFT) +#define EXTI_REG3 (0x02UL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2 | EXTI_REG3) +#define EXTI_PIN_MASK 0x0000001FUL + +/** + * @brief EXTI Target and bit usage + */ +#define EXTI_TARGET_SHIFT 20U +#define EXTI_TARGET_MSK_NONE (0x00UL << EXTI_TARGET_SHIFT) +#define EXTI_TARGET_MSK_D3SRD (0x01UL << EXTI_TARGET_SHIFT) +#define EXTI_TARGET_MSK_CPU1 (0x02UL << EXTI_TARGET_SHIFT) +#if defined (DUAL_CORE) +#define EXTI_TARGET_MSK_CPU2 (0x04UL << EXTI_TARGET_SHIFT) +#define EXTI_TARGET_MASK (EXTI_TARGET_MSK_D3SRD | EXTI_TARGET_MSK_CPU1 | EXTI_TARGET_MSK_CPU2) +#define EXTI_TARGET_MSK_ALL_CPU (EXTI_TARGET_MSK_CPU1 | EXTI_TARGET_MSK_CPU2) +#else +#define EXTI_TARGET_MASK (EXTI_TARGET_MSK_D3SRD | EXTI_TARGET_MSK_CPU1) +#define EXTI_TARGET_MSK_ALL_CPU EXTI_TARGET_MSK_CPU1 +#endif /* DUAL_CORE */ +#define EXTI_TARGET_MSK_ALL EXTI_TARGET_MASK + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#if defined (DUAL_CORE) +#define EXTI_MODE_MASK (EXTI_MODE_CORE1_EVENT | EXTI_MODE_CORE1_INTERRUPT | EXTI_MODE_CORE2_INTERRUPT | EXTI_MODE_CORE2_EVENT) +#else +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) +#endif /* DUAL_CORE */ + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#if (STM32H7_DEV_ID == 0x483UL) +#define EXTI_LINE_NB 92UL +#elif (STM32H7_DEV_ID == 0x480UL) +#define EXTI_LINE_NB 89UL +#else +#define EXTI_LINE_NB 88UL +#endif /* EXTI_LINE_91 */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_PROPERTY(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) +#if defined (DUAL_CORE) +#define IS_EXTI_TARGET(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU1) || \ + (((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU2) || \ + (((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL_CPU) || \ + (((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL)) +#else +#define IS_EXTI_TARGET(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU1) || \ + (((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL)) +#endif + +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK |\ + EXTI_REG_MASK | EXTI_PIN_MASK | EXTI_TARGET_MASK)) == 0x00UL) && \ + IS_EXTI_PROPERTY(__EXTI_LINE__) && IS_EXTI_TARGET(__EXTI_LINE__) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32UL) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32UL)))) + +#define IS_EXTI_MODE(__MODE__) (((__MODE__) & ~EXTI_MODE_MASK) == 0x00UL) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00UL) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \ + ((__EXTI_LINE__) == EXTI_TRIGGER_FALLING)|| \ + ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00UL) + +#if defined(GPIOI) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOI) || \ + ((__PORT__) == EXTI_GPIOJ) || \ + ((__PORT__) == EXTI_GPIOK)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOJ) || \ + ((__PORT__) == EXTI_GPIOK)) +#endif /*GPIOI*/ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16UL) +#if defined (LPTIM4) && defined (LPTIM5) +#define IS_EXTI_D3_PENDCLR_SRC(__SRC__) (((__SRC__) == EXTI_D3_PENDCLR_SRC_NONE) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH6) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH7) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM4) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM5)) +#else +#define IS_EXTI_D3_PENDCLR_SRC(__SRC__) (((__SRC__) == EXTI_D3_PENDCLR_SRC_NONE) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH6) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH7) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM2) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM3)) +#endif /* LPTIM4 && LPTIM5 */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_EXTI_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h new file mode 100644 index 0000000..a4773b5 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h @@ -0,0 +1,861 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_FLASH_H +#define STM32H7xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0U, + FLASH_PROC_SECTERASE_BANK1, + FLASH_PROC_MASSERASE_BANK1, + FLASH_PROC_PROGRAM_BANK1, + FLASH_PROC_SECTERASE_BANK2, + FLASH_PROC_MASSERASE_BANK2, + FLASH_PROC_PROGRAM_BANK2, + FLASH_PROC_ALLBANK_MASSERASE +} FLASH_ProcedureTypeDef; + + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ + + __IO uint32_t NbSectorsToErase; /*!< Internal variable to save the remaining sectors to erase in IT context */ + + __IO uint32_t VoltageForErase; /*!< Internal variable to provide voltage range selected by user in IT context */ + + __IO uint32_t Sector; /*!< Internal variable to define the current sector which is erasing */ + + __IO uint32_t Address; /*!< Internal variable to save address selected for program */ + + HAL_LockTypeDef Lock; /*!< FLASH locking object */ + + __IO uint32_t ErrorCode; /*!< FLASH error code */ + +}FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error_Code FLASH Error Code + * @brief FLASH Error Code + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */ + +#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR /*!< Write Protection Error */ +#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR /*!< Program Sequence Error */ +#define HAL_FLASH_ERROR_STRB FLASH_FLAG_STRBERR /*!< Strobe Error */ +#define HAL_FLASH_ERROR_INC FLASH_FLAG_INCERR /*!< Inconsistency Error */ +#if defined (FLASH_SR_OPERR) +#define HAL_FLASH_ERROR_OPE FLASH_FLAG_OPERR /*!< Operation Error */ +#endif /* FLASH_SR_OPERR */ +#define HAL_FLASH_ERROR_RDP FLASH_FLAG_RDPERR /*!< Read Protection Error */ +#define HAL_FLASH_ERROR_RDS FLASH_FLAG_RDSERR /*!< Read Secured Error */ +#define HAL_FLASH_ERROR_SNECC FLASH_FLAG_SNECCERR /*!< ECC Single Correction Error */ +#define HAL_FLASH_ERROR_DBECC FLASH_FLAG_DBECCERR /*!< ECC Double Detection Error */ +#define HAL_FLASH_ERROR_CRCRD FLASH_FLAG_CRCRDERR /*!< CRC Read Error */ + +#define HAL_FLASH_ERROR_WRP_BANK1 FLASH_FLAG_WRPERR_BANK1 /*!< Write Protection Error on Bank 1 */ +#define HAL_FLASH_ERROR_PGS_BANK1 FLASH_FLAG_PGSERR_BANK1 /*!< Program Sequence Error on Bank 1 */ +#define HAL_FLASH_ERROR_STRB_BANK1 FLASH_FLAG_STRBERR_BANK1 /*!< Strobe Error on Bank 1 */ +#define HAL_FLASH_ERROR_INC_BANK1 FLASH_FLAG_INCERR_BANK1 /*!< Inconsistency Error on Bank 1 */ +#if defined (FLASH_SR_OPERR) +#define HAL_FLASH_ERROR_OPE_BANK1 FLASH_FLAG_OPERR_BANK1 /*!< Operation Error on Bank 1 */ +#endif /* FLASH_SR_OPERR */ +#define HAL_FLASH_ERROR_RDP_BANK1 FLASH_FLAG_RDPERR_BANK1 /*!< Read Protection Error on Bank 1 */ +#define HAL_FLASH_ERROR_RDS_BANK1 FLASH_FLAG_RDSERR_BANK1 /*!< Read Secured Error on Bank 1 */ +#define HAL_FLASH_ERROR_SNECC_BANK1 FLASH_FLAG_SNECCERR_BANK1 /*!< ECC Single Correction Error on Bank 1 */ +#define HAL_FLASH_ERROR_DBECC_BANK1 FLASH_FLAG_DBECCERR_BANK1 /*!< ECC Double Detection Error on Bank 1 */ +#define HAL_FLASH_ERROR_CRCRD_BANK1 FLASH_FLAG_CRCRDERR_BANK1 /*!< CRC Read Error on Bank1 */ + +#define HAL_FLASH_ERROR_WRP_BANK2 FLASH_FLAG_WRPERR_BANK2 /*!< Write Protection Error on Bank 2 */ +#define HAL_FLASH_ERROR_PGS_BANK2 FLASH_FLAG_PGSERR_BANK2 /*!< Program Sequence Error on Bank 2 */ +#define HAL_FLASH_ERROR_STRB_BANK2 FLASH_FLAG_STRBERR_BANK2 /*!< Strobe Error on Bank 2 */ +#define HAL_FLASH_ERROR_INC_BANK2 FLASH_FLAG_INCERR_BANK2 /*!< Inconsistency Error on Bank 2 */ +#if defined (FLASH_SR_OPERR) +#define HAL_FLASH_ERROR_OPE_BANK2 FLASH_FLAG_OPERR_BANK2 /*!< Operation Error on Bank 2 */ +#endif /* FLASH_SR_OPERR */ +#define HAL_FLASH_ERROR_RDP_BANK2 FLASH_FLAG_RDPERR_BANK2 /*!< Read Protection Error on Bank 2 */ +#define HAL_FLASH_ERROR_RDS_BANK2 FLASH_FLAG_RDSERR_BANK2 /*!< Read Secured Error on Bank 2 */ +#define HAL_FLASH_ERROR_SNECC_BANK2 FLASH_FLAG_SNECCERR_BANK2 /*!< ECC Single Correction Error on Bank 2 */ +#define HAL_FLASH_ERROR_DBECC_BANK2 FLASH_FLAG_DBECCERR_BANK2 /*!< ECC Double Detection Error on Bank 2 */ +#define HAL_FLASH_ERROR_CRCRD_BANK2 FLASH_FLAG_CRCRDERR_BANK2 /*!< CRC Read Error on Bank2 */ + +#define HAL_FLASH_ERROR_OB_CHANGE FLASH_OPTSR_OPTCHANGEERR /*!< Option Byte Change Error */ +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define FLASH_TYPEPROGRAM_FLASHWORD 0x01U /*!< Program a flash word at a specified address */ +#if defined (FLASH_OPTCR_PG_OTP) +#define FLASH_TYPEPROGRAM_OTPWORD 0x02U /*!< Program an OTP word at a specified address */ +#endif /* FLASH_OPTCR_PG_OTP */ +/** + * @} + */ + +/** @defgroup FLASH_Flag_definition FLASH Flag definition + * @brief Flag definition + * @{ + */ +#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ +#define FLASH_FLAG_WBNE FLASH_SR_WBNE /*!< Write Buffer Not Empty flag */ +#define FLASH_FLAG_QW FLASH_SR_QW /*!< Wait Queue on flag */ +#define FLASH_FLAG_CRC_BUSY FLASH_SR_CRC_BUSY /*!< CRC Busy flag */ +#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< End Of Program on flag */ +#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< Write Protection Error on flag */ +#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< Program Sequence Error on flag */ +#define FLASH_FLAG_STRBERR FLASH_SR_STRBERR /*!< Strobe Error flag */ +#define FLASH_FLAG_INCERR FLASH_SR_INCERR /*!< Inconsistency Error on flag */ +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< Operation Error on flag */ +#endif /* FLASH_SR_OPERR */ +#define FLASH_FLAG_RDPERR FLASH_SR_RDPERR /*!< Read Protection Error on flag */ +#define FLASH_FLAG_RDSERR FLASH_SR_RDSERR /*!< Read Secured Error on flag */ +#define FLASH_FLAG_SNECCERR FLASH_SR_SNECCERR /*!< Single ECC Error Correction on flag */ +#define FLASH_FLAG_DBECCERR FLASH_SR_DBECCERR /*!< Double Detection ECC Error on flag */ +#define FLASH_FLAG_CRCEND FLASH_SR_CRCEND /*!< CRC End of Calculation flag */ +#define FLASH_FLAG_CRCRDERR FLASH_SR_CRCRDERR /*!< CRC Read Error on bank flag */ + +#define FLASH_FLAG_BSY_BANK1 FLASH_SR_BSY /*!< FLASH Bank 1 Busy flag */ +#define FLASH_FLAG_WBNE_BANK1 FLASH_SR_WBNE /*!< Write Buffer Not Empty on Bank 1 flag */ +#define FLASH_FLAG_QW_BANK1 FLASH_SR_QW /*!< Wait Queue on Bank 1 flag */ +#define FLASH_FLAG_CRC_BUSY_BANK1 FLASH_SR_CRC_BUSY /*!< CRC Busy on Bank 1 flag */ +#define FLASH_FLAG_EOP_BANK1 FLASH_SR_EOP /*!< End Of Program on Bank 1 flag */ +#define FLASH_FLAG_WRPERR_BANK1 FLASH_SR_WRPERR /*!< Write Protection Error on Bank 1 flag */ +#define FLASH_FLAG_PGSERR_BANK1 FLASH_SR_PGSERR /*!< Program Sequence Error on Bank 1 flag */ +#define FLASH_FLAG_STRBERR_BANK1 FLASH_SR_STRBERR /*!< Strobe Error on Bank 1 flag */ +#define FLASH_FLAG_INCERR_BANK1 FLASH_SR_INCERR /*!< Inconsistency Error on Bank 1 flag */ +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_OPERR_BANK1 FLASH_SR_OPERR /*!< Operation Error on Bank 1 flag */ +#endif /* FLASH_SR_OPERR */ +#define FLASH_FLAG_RDPERR_BANK1 FLASH_SR_RDPERR /*!< Read Protection Error on Bank 1 flag */ +#define FLASH_FLAG_RDSERR_BANK1 FLASH_SR_RDSERR /*!< Read Secured Error on Bank 1 flag */ +#define FLASH_FLAG_SNECCERR_BANK1 FLASH_SR_SNECCERR /*!< Single ECC Error Correction on Bank 1 flag */ +#define FLASH_FLAG_DBECCERR_BANK1 FLASH_SR_DBECCERR /*!< Double Detection ECC Error on Bank 1 flag */ +#define FLASH_FLAG_CRCEND_BANK1 FLASH_SR_CRCEND /*!< CRC End of Calculation on Bank 1 flag */ +#define FLASH_FLAG_CRCRDERR_BANK1 FLASH_SR_CRCRDERR /*!< CRC Read error on Bank 1 flag */ + +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_ALL_ERRORS_BANK1 (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | \ + FLASH_FLAG_STRBERR_BANK1 | FLASH_FLAG_INCERR_BANK1 | \ + FLASH_FLAG_OPERR_BANK1 | FLASH_FLAG_RDPERR_BANK1 | \ + FLASH_FLAG_RDSERR_BANK1 | FLASH_FLAG_SNECCERR_BANK1 | \ + FLASH_FLAG_DBECCERR_BANK1 | FLASH_FLAG_CRCRDERR_BANK1) /*!< All Bank 1 error flags */ +#else +#define FLASH_FLAG_ALL_ERRORS_BANK1 (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | \ + FLASH_FLAG_STRBERR_BANK1 | FLASH_FLAG_INCERR_BANK1 | \ + FLASH_FLAG_RDPERR_BANK1 | FLASH_FLAG_RDSERR_BANK1 | \ + FLASH_FLAG_SNECCERR_BANK1 | FLASH_FLAG_DBECCERR_BANK1 | \ + FLASH_FLAG_CRCRDERR_BANK1) /*!< All Bank 1 error flags */ +#endif /* FLASH_SR_OPERR */ + +#define FLASH_FLAG_ALL_BANK1 (FLASH_FLAG_BSY_BANK1 | FLASH_FLAG_WBNE_BANK1 | \ + FLASH_FLAG_QW_BANK1 | FLASH_FLAG_CRC_BUSY_BANK1 | \ + FLASH_FLAG_EOP_BANK1 | FLASH_FLAG_CRCEND_BANK1 | \ + FLASH_FLAG_ALL_ERRORS_BANK1) /*!< All Bank 1 flags */ + +#define FLASH_FLAG_BSY_BANK2 (FLASH_SR_BSY | 0x80000000U) /*!< FLASH Bank 2 Busy flag */ +#define FLASH_FLAG_WBNE_BANK2 (FLASH_SR_WBNE | 0x80000000U) /*!< Write Buffer Not Empty on Bank 2 flag */ +#define FLASH_FLAG_QW_BANK2 (FLASH_SR_QW | 0x80000000U) /*!< Wait Queue on Bank 2 flag */ +#define FLASH_FLAG_CRC_BUSY_BANK2 (FLASH_SR_CRC_BUSY | 0x80000000U) /*!< CRC Busy on Bank 2 flag */ +#define FLASH_FLAG_EOP_BANK2 (FLASH_SR_EOP | 0x80000000U) /*!< End Of Program on Bank 2 flag */ +#define FLASH_FLAG_WRPERR_BANK2 (FLASH_SR_WRPERR | 0x80000000U) /*!< Write Protection Error on Bank 2 flag */ +#define FLASH_FLAG_PGSERR_BANK2 (FLASH_SR_PGSERR | 0x80000000U) /*!< Program Sequence Error on Bank 2 flag */ +#define FLASH_FLAG_STRBERR_BANK2 (FLASH_SR_STRBERR | 0x80000000U) /*!< Strobe Error on Bank 2 flag */ +#define FLASH_FLAG_INCERR_BANK2 (FLASH_SR_INCERR | 0x80000000U) /*!< Inconsistency Error on Bank 2 flag */ +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_OPERR_BANK2 (FLASH_SR_OPERR | 0x80000000U) /*!< Operation Error on Bank 2 flag */ +#endif /* FLASH_SR_OPERR */ +#define FLASH_FLAG_RDPERR_BANK2 (FLASH_SR_RDPERR | 0x80000000U) /*!< Read Protection Error on Bank 2 flag */ +#define FLASH_FLAG_RDSERR_BANK2 (FLASH_SR_RDSERR | 0x80000000U) /*!< Read Secured Error on Bank 2 flag */ +#define FLASH_FLAG_SNECCERR_BANK2 (FLASH_SR_SNECCERR | 0x80000000U) /*!< Single ECC Error Correction on Bank 2 flag */ +#define FLASH_FLAG_DBECCERR_BANK2 (FLASH_SR_DBECCERR | 0x80000000U) /*!< Double Detection ECC Error on Bank 2 flag */ +#define FLASH_FLAG_CRCEND_BANK2 (FLASH_SR_CRCEND | 0x80000000U) /*!< CRC End of Calculation on Bank 2 flag */ +#define FLASH_FLAG_CRCRDERR_BANK2 (FLASH_SR_CRCRDERR | 0x80000000U) /*!< CRC Read error on Bank 2 flag */ + +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_ALL_ERRORS_BANK2 (FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | \ + FLASH_FLAG_STRBERR_BANK2 | FLASH_FLAG_INCERR_BANK2 | \ + FLASH_FLAG_OPERR_BANK2 | FLASH_FLAG_RDPERR_BANK2 | \ + FLASH_FLAG_RDSERR_BANK2 | FLASH_FLAG_SNECCERR_BANK2 | \ + FLASH_FLAG_DBECCERR_BANK2 | FLASH_FLAG_CRCRDERR_BANK2) /*!< All Bank 2 error flags */ +#else +#define FLASH_FLAG_ALL_ERRORS_BANK2 (FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | \ + FLASH_FLAG_STRBERR_BANK2 | FLASH_FLAG_INCERR_BANK2 | \ + FLASH_FLAG_RDPERR_BANK2 | FLASH_FLAG_RDSERR_BANK2 | \ + FLASH_FLAG_SNECCERR_BANK2 | FLASH_FLAG_DBECCERR_BANK2 | \ + FLASH_FLAG_CRCRDERR_BANK2) /*!< All Bank 2 error flags */ +#endif /* FLASH_SR_OPERR */ + +#define FLASH_FLAG_ALL_BANK2 (FLASH_FLAG_BSY_BANK2 | FLASH_FLAG_WBNE_BANK2 | \ + FLASH_FLAG_QW_BANK2 | FLASH_FLAG_CRC_BUSY_BANK2 | \ + FLASH_FLAG_EOP_BANK2 | FLASH_FLAG_CRCEND_BANK2 | \ + FLASH_FLAG_ALL_ERRORS_BANK2) /*!< All Bank 2 flags */ +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP_BANK1 FLASH_CR_EOPIE /*!< End of FLASH Bank 1 Operation Interrupt source */ +#define FLASH_IT_WRPERR_BANK1 FLASH_CR_WRPERRIE /*!< Write Protection Error on Bank 1 Interrupt source */ +#define FLASH_IT_PGSERR_BANK1 FLASH_CR_PGSERRIE /*!< Program Sequence Error on Bank 1 Interrupt source */ +#define FLASH_IT_STRBERR_BANK1 FLASH_CR_STRBERRIE /*!< Strobe Error on Bank 1 Interrupt source */ +#define FLASH_IT_INCERR_BANK1 FLASH_CR_INCERRIE /*!< Inconsistency Error on Bank 1 Interrupt source */ +#if defined (FLASH_CR_OPERRIE) +#define FLASH_IT_OPERR_BANK1 FLASH_CR_OPERRIE /*!< Operation Error on Bank 1 Interrupt source */ +#endif /* FLASH_CR_OPERRIE */ +#define FLASH_IT_RDPERR_BANK1 FLASH_CR_RDPERRIE /*!< Read protection Error on Bank 1 Interrupt source */ +#define FLASH_IT_RDSERR_BANK1 FLASH_CR_RDSERRIE /*!< Read Secured Error on Bank 1 Interrupt source */ +#define FLASH_IT_SNECCERR_BANK1 FLASH_CR_SNECCERRIE /*!< Single ECC Error Correction on Bank 1 Interrupt source */ +#define FLASH_IT_DBECCERR_BANK1 FLASH_CR_DBECCERRIE /*!< Double Detection ECC Error on Bank 1 Interrupt source */ +#define FLASH_IT_CRCEND_BANK1 FLASH_CR_CRCENDIE /*!< CRC End on Bank 1 Interrupt source */ +#define FLASH_IT_CRCRDERR_BANK1 FLASH_CR_CRCRDERRIE /*!< CRC Read error on Bank 1 Interrupt source */ + +#if defined (FLASH_CR_OPERRIE) +#define FLASH_IT_ALL_BANK1 (FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | \ + FLASH_IT_PGSERR_BANK1 | FLASH_IT_STRBERR_BANK1 | \ + FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1 | \ + FLASH_IT_RDPERR_BANK1 | FLASH_IT_RDSERR_BANK1 | \ + FLASH_IT_SNECCERR_BANK1 | FLASH_IT_DBECCERR_BANK1 | \ + FLASH_IT_CRCEND_BANK1 | FLASH_IT_CRCRDERR_BANK1) /*!< All Bank 1 Interrupt sources */ +#else +#define FLASH_IT_ALL_BANK1 (FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | \ + FLASH_IT_PGSERR_BANK1 | FLASH_IT_STRBERR_BANK1 | \ + FLASH_IT_INCERR_BANK1 | FLASH_IT_RDPERR_BANK1 | \ + FLASH_IT_RDSERR_BANK1 | FLASH_IT_SNECCERR_BANK1 | \ + FLASH_IT_DBECCERR_BANK1 | FLASH_IT_CRCEND_BANK1 | \ + FLASH_IT_CRCRDERR_BANK1) /*!< All Bank 1 Interrupt sources */ +#endif /* FLASH_CR_OPERRIE */ + +#define FLASH_IT_EOP_BANK2 (FLASH_CR_EOPIE | 0x80000000U) /*!< End of FLASH Bank 2 Operation Interrupt source */ +#define FLASH_IT_WRPERR_BANK2 (FLASH_CR_WRPERRIE | 0x80000000U) /*!< Write Protection Error on Bank 2 Interrupt source */ +#define FLASH_IT_PGSERR_BANK2 (FLASH_CR_PGSERRIE | 0x80000000U) /*!< Program Sequence Error on Bank 2 Interrupt source */ +#define FLASH_IT_STRBERR_BANK2 (FLASH_CR_STRBERRIE | 0x80000000U) /*!< Strobe Error on Bank 2 Interrupt source */ +#define FLASH_IT_INCERR_BANK2 (FLASH_CR_INCERRIE | 0x80000000U) /*!< Inconsistency Error on Bank 2 Interrupt source */ +#if defined (FLASH_CR_OPERRIE) +#define FLASH_IT_OPERR_BANK2 (FLASH_CR_OPERRIE | 0x80000000U) /*!< Operation Error on Bank 2 Interrupt source */ +#endif /* FLASH_CR_OPERRIE */ +#define FLASH_IT_RDPERR_BANK2 (FLASH_CR_RDPERRIE | 0x80000000U) /*!< Read protection Error on Bank 2 Interrupt source */ +#define FLASH_IT_RDSERR_BANK2 (FLASH_CR_RDSERRIE | 0x80000000U) /*!< Read Secured Error on Bank 2 Interrupt source */ +#define FLASH_IT_SNECCERR_BANK2 (FLASH_CR_SNECCERRIE | 0x80000000U) /*!< Single ECC Error Correction on Bank 2 Interrupt source */ +#define FLASH_IT_DBECCERR_BANK2 (FLASH_CR_DBECCERRIE | 0x80000000U) /*!< Double Detection ECC Error on Bank 2 Interrupt source */ +#define FLASH_IT_CRCEND_BANK2 (FLASH_CR_CRCENDIE | 0x80000000U) /*!< CRC End on Bank 2 Interrupt source */ +#define FLASH_IT_CRCRDERR_BANK2 (FLASH_CR_CRCRDERRIE | 0x80000000U) /*!< CRC Read Error on Bank 2 Interrupt source */ + +#if defined (FLASH_CR_OPERRIE) +#define FLASH_IT_ALL_BANK2 (FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | \ + FLASH_IT_PGSERR_BANK2 | FLASH_IT_STRBERR_BANK2 | \ + FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2 | \ + FLASH_IT_RDPERR_BANK2 | FLASH_IT_RDSERR_BANK2 | \ + FLASH_IT_SNECCERR_BANK2 | FLASH_IT_DBECCERR_BANK2 | \ + FLASH_IT_CRCEND_BANK2 | FLASH_IT_CRCRDERR_BANK2) /*!< All Bank 2 Interrupt sources */ +#else +#define FLASH_IT_ALL_BANK2 (FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | \ + FLASH_IT_PGSERR_BANK2 | FLASH_IT_STRBERR_BANK2 | \ + FLASH_IT_INCERR_BANK2 | FLASH_IT_RDPERR_BANK2 | \ + FLASH_IT_RDSERR_BANK2 | FLASH_IT_SNECCERR_BANK2 | \ + FLASH_IT_DBECCERR_BANK2 | FLASH_IT_CRCEND_BANK2 | \ + FLASH_IT_CRCRDERR_BANK2) /*!< All Bank 2 Interrupt sources */ +#endif /* FLASH_CR_OPERRIE */ +/** + * @} + */ + +#if defined (FLASH_CR_PSIZE) +/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism + * @{ + */ +#define FLASH_PSIZE_BYTE 0x00000000U /*!< Flash program/erase by 8 bits */ +#define FLASH_PSIZE_HALF_WORD FLASH_CR_PSIZE_0 /*!< Flash program/erase by 16 bits */ +#define FLASH_PSIZE_WORD FLASH_CR_PSIZE_1 /*!< Flash program/erase by 32 bits */ +#define FLASH_PSIZE_DOUBLE_WORD FLASH_CR_PSIZE /*!< Flash program/erase by 64 bits */ +/** + * @} + */ +#endif /* FLASH_CR_PSIZE */ + + +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define FLASH_KEY1 0x45670123U +#define FLASH_KEY2 0xCDEF89ABU +#define FLASH_OPT_KEY1 0x08192A3BU +#define FLASH_OPT_KEY2 0x4C5D6E7FU +/** + * @} + */ + +/** @defgroup FLASH_Sectors FLASH Sectors + * @{ + */ +#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */ +#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */ +#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */ +#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */ +#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */ +#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */ +#define FLASH_SECTOR_6 6U /*!< Sector Number 6 */ +#define FLASH_SECTOR_7 7U /*!< Sector Number 7 */ +#if (FLASH_SECTOR_TOTAL == 128) +#define FLASH_SECTOR_8 8U /*!< Sector Number 8 */ +#define FLASH_SECTOR_9 9U /*!< Sector Number 9 */ +#define FLASH_SECTOR_10 10U /*!< Sector Number 10 */ +#define FLASH_SECTOR_11 11U /*!< Sector Number 11 */ +#define FLASH_SECTOR_12 12U /*!< Sector Number 12 */ +#define FLASH_SECTOR_13 13U /*!< Sector Number 13 */ +#define FLASH_SECTOR_14 14U /*!< Sector Number 14 */ +#define FLASH_SECTOR_15 15U /*!< Sector Number 15 */ +#define FLASH_SECTOR_16 16U /*!< Sector Number 16 */ +#define FLASH_SECTOR_17 17U /*!< Sector Number 17 */ +#define FLASH_SECTOR_18 18U /*!< Sector Number 18 */ +#define FLASH_SECTOR_19 19U /*!< Sector Number 19 */ +#define FLASH_SECTOR_20 20U /*!< Sector Number 20 */ +#define FLASH_SECTOR_21 21U /*!< Sector Number 21 */ +#define FLASH_SECTOR_22 22U /*!< Sector Number 22 */ +#define FLASH_SECTOR_23 23U /*!< Sector Number 23 */ +#define FLASH_SECTOR_24 24U /*!< Sector Number 24 */ +#define FLASH_SECTOR_25 25U /*!< Sector Number 25 */ +#define FLASH_SECTOR_26 26U /*!< Sector Number 26 */ +#define FLASH_SECTOR_27 27U /*!< Sector Number 27 */ +#define FLASH_SECTOR_28 28U /*!< Sector Number 28 */ +#define FLASH_SECTOR_29 29U /*!< Sector Number 29 */ +#define FLASH_SECTOR_30 30U /*!< Sector Number 30 */ +#define FLASH_SECTOR_31 31U /*!< Sector Number 31 */ +#define FLASH_SECTOR_32 32U /*!< Sector Number 32 */ +#define FLASH_SECTOR_33 33U /*!< Sector Number 33 */ +#define FLASH_SECTOR_34 34U /*!< Sector Number 34 */ +#define FLASH_SECTOR_35 35U /*!< Sector Number 35 */ +#define FLASH_SECTOR_36 36U /*!< Sector Number 36 */ +#define FLASH_SECTOR_37 37U /*!< Sector Number 37 */ +#define FLASH_SECTOR_38 38U /*!< Sector Number 38 */ +#define FLASH_SECTOR_39 39U /*!< Sector Number 39 */ +#define FLASH_SECTOR_40 40U /*!< Sector Number 40 */ +#define FLASH_SECTOR_41 41U /*!< Sector Number 41 */ +#define FLASH_SECTOR_42 42U /*!< Sector Number 42 */ +#define FLASH_SECTOR_43 43U /*!< Sector Number 43 */ +#define FLASH_SECTOR_44 44U /*!< Sector Number 44 */ +#define FLASH_SECTOR_45 45U /*!< Sector Number 45 */ +#define FLASH_SECTOR_46 46U /*!< Sector Number 46 */ +#define FLASH_SECTOR_47 47U /*!< Sector Number 47 */ +#define FLASH_SECTOR_48 48U /*!< Sector Number 48 */ +#define FLASH_SECTOR_49 49U /*!< Sector Number 49 */ +#define FLASH_SECTOR_50 50U /*!< Sector Number 50 */ +#define FLASH_SECTOR_51 51U /*!< Sector Number 51 */ +#define FLASH_SECTOR_52 52U /*!< Sector Number 52 */ +#define FLASH_SECTOR_53 53U /*!< Sector Number 53 */ +#define FLASH_SECTOR_54 54U /*!< Sector Number 54 */ +#define FLASH_SECTOR_55 55U /*!< Sector Number 55 */ +#define FLASH_SECTOR_56 56U /*!< Sector Number 56 */ +#define FLASH_SECTOR_57 57U /*!< Sector Number 57 */ +#define FLASH_SECTOR_58 58U /*!< Sector Number 58 */ +#define FLASH_SECTOR_59 59U /*!< Sector Number 59 */ +#define FLASH_SECTOR_60 60U /*!< Sector Number 60 */ +#define FLASH_SECTOR_61 61U /*!< Sector Number 61 */ +#define FLASH_SECTOR_62 62U /*!< Sector Number 62 */ +#define FLASH_SECTOR_63 63U /*!< Sector Number 63 */ +#define FLASH_SECTOR_64 64U /*!< Sector Number 64 */ +#define FLASH_SECTOR_65 65U /*!< Sector Number 65 */ +#define FLASH_SECTOR_66 66U /*!< Sector Number 66 */ +#define FLASH_SECTOR_67 67U /*!< Sector Number 67 */ +#define FLASH_SECTOR_68 68U /*!< Sector Number 68 */ +#define FLASH_SECTOR_69 69U /*!< Sector Number 69 */ +#define FLASH_SECTOR_70 70U /*!< Sector Number 70 */ +#define FLASH_SECTOR_71 71U /*!< Sector Number 71 */ +#define FLASH_SECTOR_72 72U /*!< Sector Number 72 */ +#define FLASH_SECTOR_73 73U /*!< Sector Number 73 */ +#define FLASH_SECTOR_74 74U /*!< Sector Number 74 */ +#define FLASH_SECTOR_75 75U /*!< Sector Number 75 */ +#define FLASH_SECTOR_76 76U /*!< Sector Number 76 */ +#define FLASH_SECTOR_77 77U /*!< Sector Number 77 */ +#define FLASH_SECTOR_78 78U /*!< Sector Number 78 */ +#define FLASH_SECTOR_79 79U /*!< Sector Number 79 */ +#define FLASH_SECTOR_80 80U /*!< Sector Number 80 */ +#define FLASH_SECTOR_81 81U /*!< Sector Number 81 */ +#define FLASH_SECTOR_82 82U /*!< Sector Number 82 */ +#define FLASH_SECTOR_83 83U /*!< Sector Number 83 */ +#define FLASH_SECTOR_84 84U /*!< Sector Number 84 */ +#define FLASH_SECTOR_85 85U /*!< Sector Number 85 */ +#define FLASH_SECTOR_86 86U /*!< Sector Number 86 */ +#define FLASH_SECTOR_87 87U /*!< Sector Number 87 */ +#define FLASH_SECTOR_88 88U /*!< Sector Number 88 */ +#define FLASH_SECTOR_89 89U /*!< Sector Number 89 */ +#define FLASH_SECTOR_90 90U /*!< Sector Number 90 */ +#define FLASH_SECTOR_91 91U /*!< Sector Number 91 */ +#define FLASH_SECTOR_92 92U /*!< Sector Number 92 */ +#define FLASH_SECTOR_93 93U /*!< Sector Number 93 */ +#define FLASH_SECTOR_94 94U /*!< Sector Number 94 */ +#define FLASH_SECTOR_95 95U /*!< Sector Number 95 */ +#define FLASH_SECTOR_96 96U /*!< Sector Number 96 */ +#define FLASH_SECTOR_97 97U /*!< Sector Number 97 */ +#define FLASH_SECTOR_98 98U /*!< Sector Number 98 */ +#define FLASH_SECTOR_99 99U /*!< Sector Number 99 */ +#define FLASH_SECTOR_100 100U /*!< Sector Number 100 */ +#define FLASH_SECTOR_101 101U /*!< Sector Number 101 */ +#define FLASH_SECTOR_102 102U /*!< Sector Number 102 */ +#define FLASH_SECTOR_103 103U /*!< Sector Number 103 */ +#define FLASH_SECTOR_104 104U /*!< Sector Number 104 */ +#define FLASH_SECTOR_105 105U /*!< Sector Number 105 */ +#define FLASH_SECTOR_106 106U /*!< Sector Number 106 */ +#define FLASH_SECTOR_107 107U /*!< Sector Number 107 */ +#define FLASH_SECTOR_108 108U /*!< Sector Number 108 */ +#define FLASH_SECTOR_109 109U /*!< Sector Number 109 */ +#define FLASH_SECTOR_110 110U /*!< Sector Number 110 */ +#define FLASH_SECTOR_111 111U /*!< Sector Number 111 */ +#define FLASH_SECTOR_112 112U /*!< Sector Number 112 */ +#define FLASH_SECTOR_113 113U /*!< Sector Number 113 */ +#define FLASH_SECTOR_114 114U /*!< Sector Number 114 */ +#define FLASH_SECTOR_115 115U /*!< Sector Number 115 */ +#define FLASH_SECTOR_116 116U /*!< Sector Number 116 */ +#define FLASH_SECTOR_117 117U /*!< Sector Number 117 */ +#define FLASH_SECTOR_118 118U /*!< Sector Number 118 */ +#define FLASH_SECTOR_119 119U /*!< Sector Number 119 */ +#define FLASH_SECTOR_120 120U /*!< Sector Number 120 */ +#define FLASH_SECTOR_121 121U /*!< Sector Number 121 */ +#define FLASH_SECTOR_122 122U /*!< Sector Number 122 */ +#define FLASH_SECTOR_123 123U /*!< Sector Number 123 */ +#define FLASH_SECTOR_124 124U /*!< Sector Number 124 */ +#define FLASH_SECTOR_125 125U /*!< Sector Number 125 */ +#define FLASH_SECTOR_126 126U /*!< Sector Number 126 */ +#define FLASH_SECTOR_127 127U /*!< Sector Number 127 */ +#endif /* FLASH_SECTOR_TOTAL == 128 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @{ + */ +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__: FLASH Latency + * The value of this parameter depend on device used within the same series + * @retval none + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__)) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * The value of this parameter depend on device used within the same series + */ +#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ : FLASH interrupt + * In case of Bank 1 This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP_BANK1 : End of FLASH Bank 1 Operation Interrupt source + * @arg FLASH_IT_WRPERR_BANK1 : Write Protection Error on Bank 1 Interrupt source + * @arg FLASH_IT_PGSERR_BANK1 : Program Sequence Error on Bank 1 Interrupt source + * @arg FLASH_IT_STRBERR_BANK1 : Strobe Error on Bank 1 Interrupt source + * @arg FLASH_IT_INCERR_BANK1 : Inconsistency Error on Bank 1 Interrupt source + * @arg FLASH_IT_OPERR_BANK1 : Operation Error on Bank 1 Interrupt source + * @arg FLASH_IT_RDPERR_BANK1 : Read protection Error on Bank 1 Interrupt source + * @arg FLASH_IT_RDSERR_BANK1 : Read secure Error on Bank 1 Interrupt source + * @arg FLASH_IT_SNECCERR_BANK1 : Single ECC Error Correction on Bank 1 Interrupt source + * @arg FLASH_IT_DBECCERR_BANK1 : Double Detection ECC Error on Bank 1 Interrupt source + * @arg FLASH_IT_CRCEND_BANK1 : CRC End on Bank 1 Interrupt source + * @arg FLASH_IT_CRCRDERR_BANK1 : CRC Read error on Bank 1 Interrupt source + * @arg FLASH_IT_ALL_BANK1 : All Bank 1 Interrupt sources + * + * In case of Bank 2, this parameter can be any combination of the following values: + * @arg FLASH_IT_EOP_BANK2 : End of FLASH Bank 2 Operation Interrupt source + * @arg FLASH_IT_WRPERR_BANK2 : Write Protection Error on Bank 2 Interrupt source + * @arg FLASH_IT_PGSERR_BANK2 : Program Sequence Error on Bank 2 Interrupt source + * @arg FLASH_IT_STRBERR_BANK2 : Strobe Error on Bank 2 Interrupt source + * @arg FLASH_IT_INCERR_BANK2 : Inconsistency Error on Bank 2 Interrupt source + * @arg FLASH_IT_OPERR_BANK2 : Operation Error on Bank 2 Interrupt source + * @arg FLASH_IT_RDPERR_BANK2 : Read protection Error on Bank 2 Interrupt source + * @arg FLASH_IT_RDSERR_BANK2 : Read secure Error on Bank 2 Interrupt source + * @arg FLASH_IT_SNECCERR_BANK2 : Single ECC Error Correction on Bank 2 Interrupt source + * @arg FLASH_IT_DBECCERR_BANK2 : Double Detection ECC Error on Bank 2 Interrupt source + * @arg FLASH_IT_CRCEND_BANK2 : CRC End on Bank 2 Interrupt source + * @arg FLASH_IT_CRCRDERR_BANK2 : CRC Read error on Bank 2 Interrupt source + * @arg FLASH_IT_ALL_BANK2 : All Bank 2 Interrupt sources + * @retval none + */ + +#define __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) (FLASH->CR1 |= (__INTERRUPT__)) + +#define __HAL_FLASH_ENABLE_IT_BANK2(__INTERRUPT__) (FLASH->CR2 |= ((__INTERRUPT__) & 0x7FFFFFFFU)) + +#if defined (DUAL_BANK) +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (IS_FLASH_IT_BANK1(__INTERRUPT__) ? \ + __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) : \ + __HAL_FLASH_ENABLE_IT_BANK2(__INTERRUPT__)) +#else +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) +#endif /* DUAL_BANK */ + + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ : FLASH interrupt + * In case of Bank 1 This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP_BANK1 : End of FLASH Bank 1 Operation Interrupt source + * @arg FLASH_IT_WRPERR_BANK1 : Write Protection Error on Bank 1 Interrupt source + * @arg FLASH_IT_PGSERR_BANK1 : Program Sequence Error on Bank 1 Interrupt source + * @arg FLASH_IT_STRBERR_BANK1 : Strobe Error on Bank 1 Interrupt source + * @arg FLASH_IT_INCERR_BANK1 : Inconsistency Error on Bank 1 Interrupt source + * @arg FLASH_IT_OPERR_BANK1 : Operation Error on Bank 1 Interrupt source + * @arg FLASH_IT_RDPERR_BANK1 : Read protection Error on Bank 1 Interrupt source + * @arg FLASH_IT_RDSERR_BANK1 : Read secure Error on Bank 1 Interrupt source + * @arg FLASH_IT_SNECCERR_BANK1 : Single ECC Error Correction on Bank 1 Interrupt source + * @arg FLASH_IT_DBECCERR_BANK1 : Double Detection ECC Error on Bank 1 Interrupt source + * @arg FLASH_IT_CRCEND_BANK1 : CRC End on Bank 1 Interrupt source + * @arg FLASH_IT_CRCRDERR_BANK1 : CRC Read error on Bank 1 Interrupt source + * @arg FLASH_IT_ALL_BANK1 : All Bank 1 Interrupt sources + * + * In case of Bank 2, this parameter can be any combination of the following values: + * @arg FLASH_IT_EOP_BANK2 : End of FLASH Bank 2 Operation Interrupt source + * @arg FLASH_IT_WRPERR_BANK2 : Write Protection Error on Bank 2 Interrupt source + * @arg FLASH_IT_PGSERR_BANK2 : Program Sequence Error on Bank 2 Interrupt source + * @arg FLASH_IT_STRBERR_BANK2 : Strobe Error on Bank 2 Interrupt source + * @arg FLASH_IT_INCERR_BANK2 : Inconsistency Error on Bank 2 Interrupt source + * @arg FLASH_IT_OPERR_BANK2 : Operation Error on Bank 2 Interrupt source + * @arg FLASH_IT_RDPERR_BANK2 : Read protection Error on Bank 2 Interrupt source + * @arg FLASH_IT_RDSERR_BANK2 : Read secure Error on Bank 2 Interrupt source + * @arg FLASH_IT_SNECCERR_BANK2 : Single ECC Error Correction on Bank 2 Interrupt source + * @arg FLASH_IT_DBECCERR_BANK2 : Double Detection ECC Error on Bank 2 Interrupt source + * @arg FLASH_IT_CRCEND_BANK2 : CRC End on Bank 2 Interrupt source + * @arg FLASH_IT_CRCRDERR_BANK2 : CRC Read error on Bank 2 Interrupt source + * @arg FLASH_IT_ALL_BANK2 : All Bank 2 Interrupt sources + * @retval none + */ + +#define __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) (FLASH->CR1 &= ~(uint32_t)(__INTERRUPT__)) + +#define __HAL_FLASH_DISABLE_IT_BANK2(__INTERRUPT__) (FLASH->CR2 &= ~(uint32_t)((__INTERRUPT__) & 0x7FFFFFFFU)) + +#if defined (DUAL_BANK) +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (IS_FLASH_IT_BANK1(__INTERRUPT__) ? \ + __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) : \ + __HAL_FLASH_DISABLE_IT_BANK2(__INTERRUPT__)) +#else +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) +#endif /* DUAL_BANK */ + + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @param __FLAG__: specifies the FLASH flag to check. + * In case of Bank 1 This parameter can be one of the following values : + * @arg FLASH_FLAG_BSY_BANK1 : FLASH Bank 1 Busy flag + * @arg FLASH_FLAG_WBNE_BANK1 : Write Buffer Not Empty on Bank 1 flag + * @arg FLASH_FLAG_QW_BANK1 : Wait Queue on Bank 1 flag + * @arg FLASH_FLAG_CRC_BUSY_BANK1 : CRC module is working on Bank 1 flag + * @arg FLASH_FLAG_EOP_BANK1 : End Of Program on Bank 1 flag + * @arg FLASH_FLAG_WRPERR_BANK1 : Write Protection Error on Bank 1 flag + * @arg FLASH_FLAG_PGSERR_BANK1 : Program Sequence Error on Bank 1 flag + * @arg FLASH_FLAG_STRBER_BANK1 : Program Alignment Error on Bank 1 flag + * @arg FLASH_FLAG_INCERR_BANK1 : Inconsistency Error on Bank 1 flag + * @arg FLASH_FLAG_OPERR_BANK1 : Operation Error on Bank 1 flag + * @arg FLASH_FLAG_RDPERR_BANK1 : Read Protection Error on Bank 1 flag + * @arg FLASH_FLAG_RDSERR_BANK1 : Read secure Error on Bank 1 flag + * @arg FLASH_FLAG_SNECCE_BANK1 : Single ECC Error Correction on Bank 1 flag + * @arg FLASH_FLAG_DBECCE_BANK1 : Double Detection ECC Error on Bank 1 flag + * @arg FLASH_FLAG_CRCEND_BANK1 : CRC End on Bank 1 flag + * @arg FLASH_FLAG_CRCRDERR_BANK1 : CRC Read error on Bank 1 flag + * + * In case of Bank 2 This parameter can be one of the following values : + * @arg FLASH_FLAG_BSY_BANK2 : FLASH Bank 2 Busy flag + * @arg FLASH_FLAG_WBNE_BANK2 : Write Buffer Not Empty on Bank 2 flag + * @arg FLASH_FLAG_QW_BANK2 : Wait Queue on Bank 2 flag + * @arg FLASH_FLAG_CRC_BUSY_BANK2 : CRC module is working on Bank 2 flag + * @arg FLASH_FLAG_EOP_BANK2 : End Of Program on Bank 2 flag + * @arg FLASH_FLAG_WRPERR_BANK2 : Write Protection Error on Bank 2 flag + * @arg FLASH_FLAG_PGSERR_BANK2 : Program Sequence Error on Bank 2 flag + * @arg FLASH_FLAG_STRBER_BANK2 : Program Alignment Error on Bank 2 flag + * @arg FLASH_FLAG_INCERR_BANK2 : Inconsistency Error on Bank 2 flag + * @arg FLASH_FLAG_OPERR_BANK2 : Operation Error on Bank 2 flag + * @arg FLASH_FLAG_RDPERR_BANK2 : Read Protection Error on Bank 2 flag + * @arg FLASH_FLAG_RDSERR_BANK2 : Read secure Error on Bank 2 flag + * @arg FLASH_FLAG_SNECCE_BANK2 : Single ECC Error Correction on Bank 2 flag + * @arg FLASH_FLAG_DBECCE_BANK2 : Double Detection ECC Error on Bank 2 flag + * @arg FLASH_FLAG_CRCEND_BANK2 : CRC End on Bank 2 flag + * @arg FLASH_FLAG_CRCRDERR_BANK2 : CRC Read error on Bank 2 flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) (READ_BIT(FLASH->SR1, (__FLAG__)) == (__FLAG__)) + +#define __HAL_FLASH_GET_FLAG_BANK2(__FLAG__) (READ_BIT(FLASH->SR2, ((__FLAG__) & 0x7FFFFFFFU)) == (((__FLAG__) & 0x7FFFFFFFU))) + +#if defined (DUAL_BANK) +#define __HAL_FLASH_GET_FLAG(__FLAG__) (IS_FLASH_FLAG_BANK1(__FLAG__) ? __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) : \ + __HAL_FLASH_GET_FLAG_BANK2(__FLAG__)) +#else +#define __HAL_FLASH_GET_FLAG(__FLAG__) __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) +#endif /* DUAL_BANK */ + + +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__: specifies the FLASH flags to clear. + * In case of Bank 1, this parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP_BANK1 : End Of Program on Bank 1 flag + * @arg FLASH_FLAG_WRPERR_BANK1 : Write Protection Error on Bank 1 flag + * @arg FLASH_FLAG_PGSERR_BANK1 : Program Sequence Error on Bank 1 flag + * @arg FLASH_FLAG_STRBER_BANK1 : Program Alignment Error on Bank 1 flag + * @arg FLASH_FLAG_INCERR_BANK1 : Inconsistency Error on Bank 1 flag + * @arg FLASH_FLAG_OPERR_BANK1 : Operation Error on Bank 1 flag + * @arg FLASH_FLAG_RDPERR_BANK1 : Read Protection Error on Bank 1 flag + * @arg FLASH_FLAG_RDSERR_BANK1 : Read secure Error on Bank 1 flag + * @arg FLASH_FLAG_SNECCE_BANK1 : Single ECC Error Correction on Bank 1 flag + * @arg FLASH_FLAG_DBECCE_BANK1 : Double Detection ECC Error on Bank 1 flag + * @arg FLASH_FLAG_CRCEND_BANK1 : CRC End on Bank 1 flag + * @arg FLASH_FLAG_CRCRDERR_BANK1 : CRC Read error on Bank 1 flag + * @arg FLASH_FLAG_ALL_ERRORS_BANK1 : All Bank 1 error flags + * @arg FLASH_FLAG_ALL_BANK1 : All Bank 1 flags + * + * In case of Bank 2, this parameter can be any combination of the following values : + * @arg FLASH_FLAG_EOP_BANK2 : End Of Program on Bank 2 flag + * @arg FLASH_FLAG_WRPERR_BANK2 : Write Protection Error on Bank 2 flag + * @arg FLASH_FLAG_PGSERR_BANK2 : Program Sequence Error on Bank 2 flag + * @arg FLASH_FLAG_STRBER_BANK2 : Program Alignment Error on Bank 2 flag + * @arg FLASH_FLAG_INCERR_BANK2 : Inconsistency Error on Bank 2 flag + * @arg FLASH_FLAG_OPERR_BANK2 : Operation Error on Bank 2 flag + * @arg FLASH_FLAG_RDPERR_BANK2 : Read Protection Error on Bank 2 flag + * @arg FLASH_FLAG_RDSERR_BANK2 : Read secure Error on Bank 2 flag + * @arg FLASH_FLAG_SNECCE_BANK2 : Single ECC Error Correction on Bank 2 flag + * @arg FLASH_FLAG_DBECCE_BANK2 : Double Detection ECC Error on Bank 2 flag + * @arg FLASH_FLAG_CRCEND_BANK2 : CRC End on Bank 2 flag + * @arg FLASH_FLAG_CRCRDERR_BANK2 : CRC Read error on Bank 2 flag + * @arg FLASH_FLAG_ALL_ERRORS_BANK2 : All Bank 2 error flags + * @arg FLASH_FLAG_ALL_BANK2 : All Bank 2 flags + * @retval none + */ + +#define __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) WRITE_REG(FLASH->CCR1, (__FLAG__)) + +#define __HAL_FLASH_CLEAR_FLAG_BANK2(__FLAG__) WRITE_REG(FLASH->CCR2, ((__FLAG__) & 0x7FFFFFFFU)) + +#if defined (DUAL_BANK) +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (IS_FLASH_FLAG_BANK1(__FLAG__) ? __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) : \ + __HAL_FLASH_CLEAR_FLAG_BANK2(__FLAG__)) +#else +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) +#endif /* DUAL_BANK */ + +/** + * @} + */ + +/* Include FLASH HAL Extension module */ +#include "stm32h7xx_hal_flash_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +/* Program operation functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State functions ************************************************/ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +#if defined (FLASH_OPTCR_PG_OTP) +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_FLASHWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_OTPWORD)) +#else +#define IS_FLASH_TYPEPROGRAM(VALUE) ((VALUE) == FLASH_TYPEPROGRAM_FLASHWORD) +#endif /* FLASH_OPTCR_PG_OTP */ + +#define IS_FLASH_IT_BANK1(IT) (((IT) & FLASH_IT_ALL_BANK1) == (IT)) +#if defined (DUAL_BANK) +#define IS_FLASH_IT_BANK2(IT) (((IT) & FLASH_IT_ALL_BANK2) == (IT)) +#endif /* DUAL_BANK */ + +#define IS_FLASH_FLAG_BANK1(FLAG) (((FLAG) & FLASH_FLAG_ALL_BANK1) == (FLAG)) +#if defined (DUAL_BANK) +#define IS_FLASH_FLAG_BANK2(FLAG) (((FLAG) & FLASH_FLAG_ALL_BANK2) == (FLAG)) +#endif /* DUAL_BANK */ + +#if defined (DUAL_BANK) +#define IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) (((ADDRESS) >= FLASH_BANK1_BASE) && ((ADDRESS) < FLASH_BANK2_BASE)) +#define IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS) (((ADDRESS) >= FLASH_BANK2_BASE ) && ((ADDRESS) <= FLASH_END)) +#else +#define IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) (((ADDRESS) >= FLASH_BANK1_BASE) && ((ADDRESS) <= FLASH_END)) +#endif /* DUAL_BANK */ + +#if defined (DUAL_BANK) +#if defined (FLASH_OPTCR_PG_OTP) +#define IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS) (((ADDRESS) >= 0x08FFF000U) && ((ADDRESS) <= 0x08FFF3FFU)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \ + IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS) || \ + IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS)) +#else +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \ + IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS)) +#endif /* FLASH_OPTCR_PG_OTP */ +#else +#if defined (FLASH_OPTCR_PG_OTP) +#define IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS) (((ADDRESS) >= 0x08FFF000U) && ((ADDRESS) <= 0x08FFF3FFU)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \ + IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS)) +#else +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS)) +#endif /* FLASH_OPTCR_PG_OTP */ +#endif /* DUAL_BANK */ + +#define IS_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= (0x3FFF0000U)) + +#if defined (DUAL_BANK) +#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2) || \ + ((BANK) == FLASH_BANK_BOTH)) +#define IS_FLASH_BANK_EXCLUSIVE(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2)) +#else +#define IS_FLASH_BANK(BANK) ((BANK) == FLASH_BANK_1) +#define IS_FLASH_BANK_EXCLUSIVE(BANK) ((BANK) == FLASH_BANK_1) +#endif /* DUAL_BANK */ + +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout, uint32_t Bank); +HAL_StatusTypeDef FLASH_OB_WaitForLastOperation(uint32_t Timeout); +HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout, uint32_t Bank); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_FLASH_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h new file mode 100644 index 0000000..1ca4e72 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h @@ -0,0 +1,1071 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_FLASH_EX_H +#define STM32H7xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or sector Erase. + This parameter can be a value of @ref FLASHEx_Type_Erase */ + + uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled + This parameter must be a value of @ref FLASH_Sectors */ + + uint32_t NbSectors; /*!< Number of sectors to be erased. + This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ + + uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism + This parameter must be a value of @ref FLASHEx_Voltage_Range */ + +} FLASH_EraseInitTypeDef; + + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a value of @ref FLASHEx_Option_Type */ + + uint32_t WRPState; /*!< Write protection activation or deactivation. + This parameter can be a value of @ref FLASHEx_WRP_State */ + + uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. + The value of this parameter depend on device used within the same series */ + + uint32_t RDPLevel; /*!< Set the read protection level. + This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ + + uint32_t BORLevel; /*!< Set the BOR Level. + This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ + + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASHEx_OB_USER_Type */ + + uint32_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY / + IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY / IO_HSLV / SWAP_BANK_OPT */ + + uint32_t Banks; /*!< Select banks for WRP , PCROP and secure area config . + This parameter must be a value of @ref FLASHEx_Banks */ + + uint32_t PCROPConfig; /*!< specifies if the PCROP area shall be erased or not + when RDP level decreased from Level 1 to Level 0 or during a mass erase. + This parameter must be a value of @ref FLASHEx_OB_PCROP_RDP enumeration */ + + uint32_t PCROPStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). + This parameter must be a value between begin and end of a bank */ + + uint32_t PCROPEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). + This parameter must be a value between PCROP Start address and end of a bank */ + + uint32_t BootConfig; /*!< Specifies if the Boot Address to be configured BOOT_ADD0, BOOT_ADD1 + or both. This parameter must be a value of @ref FLASHEx_OB_BOOT_OPTION enumeration */ + + uint32_t BootAddr0; /*!< Boot Address 0. + This parameter must be a value between begin and end of a bank */ + + uint32_t BootAddr1; /*!< Boot Address 1. + This parameter must be a value between begin and end of a bank */ +#if defined(DUAL_CORE) + uint32_t CM4BootConfig; /*!< specifies if the CM4 boot Address to be configured BOOT_ADD0, BOOT_ADD1 + or both. + This parameter must be a value of @ref FLASHEx_OB_BOOT_OPTION enumeration */ + + uint32_t CM4BootAddr0; /*!< CM4 Boot Address 0. + This parameter must be a value between begin and end of a bank */ + + uint32_t CM4BootAddr1; /*!< CM4 Boot Address 1. + This parameter must be a value between begin and end of a bank */ +#endif /*DUAL_CORE*/ + + uint32_t SecureAreaConfig; /*!< specifies if the bank secured area shall be erased or not + when RDP level decreased from Level 1 to Level 0 or during a mass erase. + This parameter must be a value of @ref FLASHEx_OB_SECURE_RDP enumeration */ + + uint32_t SecureAreaStartAddr; /*!< Bank Secure area Start address. + This parameter must be a value between begin address and end address of bank1 */ + + uint32_t SecureAreaEndAddr; /*!< Bank Secure area End address. + This parameter must be a value between Secure Area Start address and end address of a bank1 */ + +#if defined (FLASH_OTPBL_LOCKBL) + uint32_t OTPBlockLock; /*!< Specifies the OTP block(s) to be locked. + This parameter must be a value of @ref FLASHEx_OTP_Blocks */ +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) + uint32_t SharedRamConfig; /*!< Specifies the configuration of TCM / AXI shared RAM. + This parameter must be a value of @ref FLASHEx_OB_TCM_AXI_SHARED */ +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) + uint32_t FreqBoostState; /*!< Specifies the state of CPU Frequency Boost. + This parameter must be a value of @ref FLASHEx_OB_CPUFREQ_BOOST */ +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeCRC; /*!< CRC Selection Type. + This parameter can be a value of @ref FLASHEx_CRC_Selection_Type */ + + uint32_t BurstSize; /*!< CRC Burst Size. + This parameter can be a value of @ref FLASHEx_CRC_Burst_Size */ + + uint32_t Bank; /*!< Select bank where CRC computation is enabled. + This parameter must be FLASH_BANK_1 or FLASH_BANK_2 */ + + uint32_t Sector; /*!< Initial FLASH sector from which starts the CRC computation + This parameter must be a value of @ref FLASH_Sectors */ + + uint32_t NbSectors; /*!< Number of sectors to be computed. + This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ + + uint32_t CRCStartAddr; /*!< CRC Start address. + This parameter must be a value between begin address and end address of a bank */ + + uint32_t CRCEndAddr; /*!< CRC End address. + This parameter must be a value between CRC Start address and end address of a bank */ + +} FLASH_CRCInitTypeDef; + +#if (USE_FLASH_ECC == 1U) +/** + * @brief ECC Info Structure definition + */ +typedef struct +{ + uint32_t Area; /*!< Area from which an ECC was detected. + This parameter can be a value of @ref FLASHEx_ECC_Area */ + + uint32_t Address; /*!< ECC error address */ + +} FLASH_EccInfoTypeDef; +#endif /* USE_FLASH_ECC */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASHEx_Type_Erase FLASH Type Erase + * @{ + */ +#define FLASH_TYPEERASE_SECTORS 0x00U /*!< Sectors erase only */ +#define FLASH_TYPEERASE_MASSERASE 0x01U /*!< Flash Mass erase activation */ +/** + * @} + */ + +#if defined (FLASH_CR_PSIZE) +/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range + * @{ + */ +#define FLASH_VOLTAGE_RANGE_1 0x00000000U /*!< Flash program/erase by 8 bits */ +#define FLASH_VOLTAGE_RANGE_2 FLASH_CR_PSIZE_0 /*!< Flash program/erase by 16 bits */ +#define FLASH_VOLTAGE_RANGE_3 FLASH_CR_PSIZE_1 /*!< Flash program/erase by 32 bits */ +#define FLASH_VOLTAGE_RANGE_4 FLASH_CR_PSIZE /*!< Flash program/erase by 64 bits */ +/** + * @} + */ +#endif /* FLASH_CR_PSIZE */ + +/** @defgroup FLASHEx_WRP_State FLASH WRP State + * @{ + */ +#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired bank 1 sectors */ +#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired bank 1 sectors */ +/** + * @} + */ + +#if (USE_FLASH_ECC == 1U) +/** @defgroup FLASH_ECC_Area FLASH ECC Area + * @brief FLASH ECC Area + * @{ + */ +#define FLASH_ECC_AREA_USER_BANK1 0x00000000U /*!< FLASH bank 1 area */ +#define FLASH_ECC_AREA_USER_BANK2 0x00000001U /*!< FLASH bank 2 area */ +/** + * @} + */ +#endif /* USE_FLASH_ECC */ + +/** @defgroup FLASHEx_Option_Type FLASH Option Type + * @{ + */ +#define OPTIONBYTE_WRP 0x01U /*!< WRP option byte configuration */ +#define OPTIONBYTE_RDP 0x02U /*!< RDP option byte configuration */ +#define OPTIONBYTE_USER 0x04U /*!< USER option byte configuration */ +#define OPTIONBYTE_PCROP 0x08U /*!< PCROP option byte configuration */ +#define OPTIONBYTE_BOR 0x10U /*!< BOR option byte configuration */ +#define OPTIONBYTE_SECURE_AREA 0x20U /*!< secure area option byte configuration */ +#if defined (DUAL_CORE) +#define OPTIONBYTE_CM7_BOOTADD 0x40U /*!< CM7 BOOT ADD option byte configuration */ +#define OPTIONBYTE_CM4_BOOTADD 0x80U /*!< CM4 BOOT ADD option byte configuration */ +#define OPTIONBYTE_BOOTADD OPTIONBYTE_CM7_BOOTADD /*!< BOOT ADD option byte configuration */ +#else /* Single core */ +#define OPTIONBYTE_BOOTADD 0x40U /*!< BOOT ADD option byte configuration */ +#endif /*DUAL_CORE*/ +#if defined (FLASH_OTPBL_LOCKBL) +#define OPTIONBYTE_OTP_LOCK 0x80U /*!< OTP Lock option byte configuration */ +#endif /* FLASH_OTPBL_LOCKBL */ +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +#define OPTIONBYTE_SHARED_RAM 0x100U /*!< TCM / AXI Shared RAM option byte configuration */ +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +#define OPTIONBYTE_FREQ_BOOST 0x200U /*!< CPU Frequency Boost option byte configuration */ +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +#if defined (DUAL_CORE) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ + OPTIONBYTE_PCROP | OPTIONBYTE_BOR | OPTIONBYTE_SECURE_AREA |\ + OPTIONBYTE_CM7_BOOTADD | OPTIONBYTE_CM4_BOOTADD) /*!< All option byte configuration */ +#elif defined (FLASH_OTPBL_LOCKBL) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ + OPTIONBYTE_PCROP | OPTIONBYTE_BOR | OPTIONBYTE_SECURE_AREA |\ + OPTIONBYTE_BOOTADD | OPTIONBYTE_OTP_LOCK) /*!< All option byte configuration */ +#elif defined (FLASH_OPTSR2_TCM_AXI_SHARED) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ + OPTIONBYTE_PCROP | OPTIONBYTE_BOR | OPTIONBYTE_SECURE_AREA |\ + OPTIONBYTE_BOOTADD | OPTIONBYTE_SHARED_RAM | OPTIONBYTE_FREQ_BOOST) /*!< All option byte configuration */ +#else +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ + OPTIONBYTE_PCROP | OPTIONBYTE_BOR | OPTIONBYTE_SECURE_AREA |\ + OPTIONBYTE_BOOTADD) /*!< All option byte configuration */ +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection + * @{ + */ +#define OB_RDP_LEVEL_0 0xAA00U +#define OB_RDP_LEVEL_1 0x5500U +#define OB_RDP_LEVEL_2 0xCC00U /*!< Warning: When enabling read protection level 2 + it s no more possible to go back to level 1 or 0 */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog + * @{ + */ +#define OB_IWDG_SW OB_IWDG1_SW /*!< Software IWDG selected */ +#define OB_IWDG_HW OB_IWDG1_HW /*!< Hardware IWDG selected */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP + * @{ + */ +#define OB_STOP_NO_RST 0x40U /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST 0x00U /*!< Reset generated when entering in STOP */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY + * @{ + */ +#define OB_STDBY_NO_RST 0x80U /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST 0x00U /*!< Reset generated when entering in STANDBY */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP + * @{ + */ +#define OB_IWDG_STOP_FREEZE 0x00000000U /*!< Freeze IWDG counter in STOP mode */ +#define OB_IWDG_STOP_ACTIVE FLASH_OPTSR_FZ_IWDG_STOP /*!< IWDG counter active in STOP mode */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY + * @{ + */ +#define OB_IWDG_STDBY_FREEZE 0x00000000U /*!< Freeze IWDG counter in STANDBY mode */ +#define OB_IWDG_STDBY_ACTIVE FLASH_OPTSR_FZ_IWDG_SDBY /*!< IWDG counter active in STANDBY mode */ +/** + * @} + */ + +/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level + * @{ + */ +#define OB_BOR_LEVEL0 0x00000000U /*!< Reset level threshold is set to 1.6V */ +#define OB_BOR_LEVEL1 FLASH_OPTSR_BOR_LEV_0 /*!< Reset level threshold is set to 2.1V */ +#define OB_BOR_LEVEL2 FLASH_OPTSR_BOR_LEV_1 /*!< Reset level threshold is set to 2.4V */ +#define OB_BOR_LEVEL3 (FLASH_OPTSR_BOR_LEV_1 | FLASH_OPTSR_BOR_LEV_0) /*!< Reset level threshold is set to 2.7V */ +/** + * @} + */ + + + +/** @defgroup FLASHEx_Boot_Address FLASH Boot Address + * @{ + */ +#define OB_BOOTADDR_ITCM_RAM 0x0000U /*!< Boot from ITCM RAM (0x00000000) */ +#define OB_BOOTADDR_SYSTEM 0x0040U /*!< Boot from System memory bootloader (0x00100000) */ +#define OB_BOOTADDR_ITCM_FLASH 0x0080U /*!< Boot from Flash on ITCM interface (0x00200000) */ +#define OB_BOOTADDR_AXIM_FLASH 0x2000U /*!< Boot from Flash on AXIM interface (0x08000000) */ +#define OB_BOOTADDR_DTCM_RAM 0x8000U /*!< Boot from DTCM RAM (0x20000000) */ +#define OB_BOOTADDR_SRAM1 0x8004U /*!< Boot from SRAM1 (0x20010000) */ +#define OB_BOOTADDR_SRAM2 0x8013U /*!< Boot from SRAM2 (0x2004C000) */ +/** + * @} + */ + +/** @defgroup FLASH_Latency FLASH Latency + * @{ + */ +#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */ +#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */ +#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */ +#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */ +#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */ +#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */ +#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */ +#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */ + +/* Unused FLASH Latency defines */ +#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycle */ +#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycle */ +#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */ +#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */ +#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */ +#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */ +#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */ +#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */ +/** + * @} + */ + +/** @defgroup FLASHEx_Banks FLASH Banks + * @{ + */ +#define FLASH_BANK_1 0x01U /*!< Bank 1 */ +#if defined (DUAL_BANK) +#define FLASH_BANK_2 0x02U /*!< Bank 2 */ +#define FLASH_BANK_BOTH (FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */ +#endif /* DUAL_BANK */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_PCROP_RDP FLASHEx OB PCROP RDP + * @{ + */ +#define OB_PCROP_RDP_NOT_ERASE 0x00000000U /*!< PCROP area is not erased when the RDP level + is decreased from Level 1 to Level 0 or during a mass erase */ +#define OB_PCROP_RDP_ERASE FLASH_PRAR_DMEP /*!< PCROP area is erased when the RDP level is + decreased from Level 1 to Level 0 (full mass erase) */ + +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection + * @{ + */ +#if (FLASH_SECTOR_TOTAL == 128) +#define OB_WRP_SECTOR_0TO3 0x00000001U /*!< Write protection of Sector0 to Sector3 */ +#define OB_WRP_SECTOR_4TO7 0x00000002U /*!< Write protection of Sector4 to Sector7 */ +#define OB_WRP_SECTOR_8TO11 0x00000004U /*!< Write protection of Sector8 to Sector11 */ +#define OB_WRP_SECTOR_12TO15 0x00000008U /*!< Write protection of Sector12 to Sector15 */ +#define OB_WRP_SECTOR_16TO19 0x00000010U /*!< Write protection of Sector16 to Sector19 */ +#define OB_WRP_SECTOR_20TO23 0x00000020U /*!< Write protection of Sector20 to Sector23 */ +#define OB_WRP_SECTOR_24TO27 0x00000040U /*!< Write protection of Sector24 to Sector27 */ +#define OB_WRP_SECTOR_28TO31 0x00000080U /*!< Write protection of Sector28 to Sector31 */ +#define OB_WRP_SECTOR_32TO35 0x00000100U /*!< Write protection of Sector32 to Sector35 */ +#define OB_WRP_SECTOR_36TO39 0x00000200U /*!< Write protection of Sector36 to Sector39 */ +#define OB_WRP_SECTOR_40TO43 0x00000400U /*!< Write protection of Sector40 to Sector43 */ +#define OB_WRP_SECTOR_44TO47 0x00000800U /*!< Write protection of Sector44 to Sector47 */ +#define OB_WRP_SECTOR_48TO51 0x00001000U /*!< Write protection of Sector48 to Sector51 */ +#define OB_WRP_SECTOR_52TO55 0x00002000U /*!< Write protection of Sector52 to Sector55 */ +#define OB_WRP_SECTOR_56TO59 0x00004000U /*!< Write protection of Sector56 to Sector59 */ +#define OB_WRP_SECTOR_60TO63 0x00008000U /*!< Write protection of Sector60 to Sector63 */ +#define OB_WRP_SECTOR_64TO67 0x00010000U /*!< Write protection of Sector64 to Sector67 */ +#define OB_WRP_SECTOR_68TO71 0x00020000U /*!< Write protection of Sector68 to Sector71 */ +#define OB_WRP_SECTOR_72TO75 0x00040000U /*!< Write protection of Sector72 to Sector75 */ +#define OB_WRP_SECTOR_76TO79 0x00080000U /*!< Write protection of Sector76 to Sector79 */ +#define OB_WRP_SECTOR_80TO83 0x00100000U /*!< Write protection of Sector80 to Sector83 */ +#define OB_WRP_SECTOR_84TO87 0x00200000U /*!< Write protection of Sector84 to Sector87 */ +#define OB_WRP_SECTOR_88TO91 0x00400000U /*!< Write protection of Sector88 to Sector91 */ +#define OB_WRP_SECTOR_92TO95 0x00800000U /*!< Write protection of Sector92 to Sector95 */ +#define OB_WRP_SECTOR_96TO99 0x01000000U /*!< Write protection of Sector96 to Sector99 */ +#define OB_WRP_SECTOR_100TO103 0x02000000U /*!< Write protection of Sector100 to Sector103 */ +#define OB_WRP_SECTOR_104TO107 0x04000000U /*!< Write protection of Sector104 to Sector107 */ +#define OB_WRP_SECTOR_108TO111 0x08000000U /*!< Write protection of Sector108 to Sector111 */ +#define OB_WRP_SECTOR_112TO115 0x10000000U /*!< Write protection of Sector112 to Sector115 */ +#define OB_WRP_SECTOR_116TO119 0x20000000U /*!< Write protection of Sector116 to Sector119 */ +#define OB_WRP_SECTOR_120TO123 0x40000000U /*!< Write protection of Sector120 to Sector123 */ +#define OB_WRP_SECTOR_124TO127 0x80000000U /*!< Write protection of Sector124 to Sector127 */ +#define OB_WRP_SECTOR_ALL 0xFFFFFFFFU /*!< Write protection of all Sectors */ +#else +#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */ +#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */ +#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */ +#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */ +#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */ +#define OB_WRP_SECTOR_5 0x00000020U /*!< Write protection of Sector5 */ +#define OB_WRP_SECTOR_6 0x00000040U /*!< Write protection of Sector6 */ +#define OB_WRP_SECTOR_7 0x00000080U /*!< Write protection of Sector7 */ +#define OB_WRP_SECTOR_ALL 0x000000FFU /*!< Write protection of all Sectors */ +#endif /* FLASH_SECTOR_TOTAL == 128 */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_SECURITY FLASHEx OB SECURITY + * @{ + */ +#define OB_SECURITY_DISABLE 0x00000000U /*!< security enabled */ +#define OB_SECURITY_ENABLE FLASH_OPTSR_SECURITY /*!< security disabled */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_ST_RAM_SIZE FLASHEx OB ST RAM SIZE + * @{ + */ +#define OB_ST_RAM_SIZE_2KB 0x00000000U /*!< 2 Kbytes reserved to ST code */ +#define OB_ST_RAM_SIZE_4KB FLASH_OPTSR_ST_RAM_SIZE_0 /*!< 4 Kbytes reserved to ST code */ +#define OB_ST_RAM_SIZE_8KB FLASH_OPTSR_ST_RAM_SIZE_1 /*!< 8 Kbytes reserved to ST code */ +#define OB_ST_RAM_SIZE_16KB FLASH_OPTSR_ST_RAM_SIZE /*!< 16 Kbytes reserved to ST code */ +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @defgroup FLASHEx_OB_BCM7 FLASHEx OB BCM7 + * @{ + */ +#define OB_BCM7_DISABLE 0x00000000U /*!< CM7 Boot disabled */ +#define OB_BCM7_ENABLE FLASH_OPTSR_BCM7 /*!< CM7 Boot enabled */ + +/** + * @} + */ + +/** @defgroup FLASHEx_OB_BCM4 FLASHEx OB BCM4 + * @{ + */ +#define OB_BCM4_DISABLE 0x00000000U /*!< CM4 Boot disabled */ +#define OB_BCM4_ENABLE FLASH_OPTSR_BCM4 /*!< CM4 Boot enabled */ +/** + * @} + */ +#endif /* DUAL_CORE */ + +/** @defgroup FLASHEx_OB_IWDG1_SW FLASHEx OB IWDG1 SW + * @{ + */ +#define OB_IWDG1_SW FLASH_OPTSR_IWDG1_SW /*!< Hardware independent watchdog 1 */ +#define OB_IWDG1_HW 0x00000000U /*!< Software independent watchdog 1 */ +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @defgroup FLASHEx_OB_IWDG2_SW FLASHEx OB IWDG2 SW + * @{ + */ +#define OB_IWDG2_SW FLASH_OPTSR_IWDG2_SW /*!< Hardware independent watchdog 2*/ +#define OB_IWDG2_HW 0x00000000U /*!< Software independent watchdog 2*/ +/** + * @} + */ +#endif + +/** @defgroup FLASHEx_OB_NRST_STOP_D1 FLASHEx OB NRST STOP D1 + * @{ + */ +#define OB_STOP_RST_D1 0x00000000U /*!< Reset generated when entering the D1 to stop mode */ +#define OB_STOP_NO_RST_D1 FLASH_OPTSR_NRST_STOP_D1 /*!< No reset generated when entering the D1 to stop mode */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_NRST_STDBY_D1 FLASHEx OB NRST STDBY D1 + * @{ + */ +#define OB_STDBY_RST_D1 0x00000000U /*!< Reset generated when entering the D1 to standby mode */ +#define OB_STDBY_NO_RST_D1 FLASH_OPTSR_NRST_STBY_D1 /*!< No reset generated when entering the D1 to standby mode */ +/** + * @} + */ + +#if defined (FLASH_OPTSR_NRST_STOP_D2) +/** @defgroup FLASHEx_OB_NRST_STOP_D2 FLASHEx OB NRST STOP D2 + * @{ + */ +#define OB_STOP_RST_D2 0x00000000U /*!< Reset generated when entering the D2 to stop mode */ +#define OB_STOP_NO_RST_D2 FLASH_OPTSR_NRST_STOP_D2 /*!< No reset generated when entering the D2 to stop mode */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_NRST_STDBY_D2 FLASHEx OB NRST STDBY D2 + * @{ + */ +#define OB_STDBY_RST_D2 0x00000000U /*!< Reset generated when entering the D2 to standby mode */ +#define OB_STDBY_NO_RST_D2 FLASH_OPTSR_NRST_STBY_D2 /*!< No reset generated when entering the D2 to standby mode */ +/** + * @} + */ +#endif /* FLASH_OPTSR_NRST_STOP_D2 */ + +#if defined (DUAL_BANK) +/** @defgroup FLASHEx_OB_SWAP_BANK FLASHEx OB SWAP BANK + * @{ + */ +#define OB_SWAP_BANK_DISABLE 0x00000000U /*!< Bank swap disabled */ +#define OB_SWAP_BANK_ENABLE FLASH_OPTSR_SWAP_BANK_OPT /*!< Bank swap enabled */ +/** + * @} + */ +#endif /* DUAL_BANK */ + +/** @defgroup FLASHEx_OB_IOHSLV FLASHEx OB IOHSLV + * @{ + */ +#define OB_IOHSLV_DISABLE 0x00000000U /*!< IOHSLV disabled */ +#define OB_IOHSLV_ENABLE FLASH_OPTSR_IO_HSLV /*!< IOHSLV enabled */ +/** + * @} + */ + +#if defined (FLASH_OPTSR_VDDMMC_HSLV) +/** @defgroup FLASHEx_OB_VDDMMC_HSLV FLASHEx OB VDDMMC HSLV + * @{ + */ +#define OB_VDDMMC_HSLV_DISABLE 0x00000000U /*!< VDDMMC HSLV disabled */ +#define OB_VDDMMC_HSLV_ENABLE FLASH_OPTSR_VDDMMC_HSLV /*!< VDDMMC HSLV enabled */ +/** + * @} + */ +#endif /* FLASH_OPTSR_VDDMMC_HSLV */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +/** @defgroup FLASHEx_OB_CPUFREQ_BOOST FLASHEx OB CPUFREQ BOOST + * @{ + */ +#define OB_CPUFREQ_BOOST_DISABLE 0x00000000U /*!< CPUFREQ BOOST disabled */ +#define OB_CPUFREQ_BOOST_ENABLE FLASH_OPTSR2_CPUFREQ_BOOST /*!< CPUFREQ BOOST enabled */ +/** + * @} + */ +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +/** @defgroup FLASHEx_OB_TCM_AXI_SHARED FLASHEx OB TCM AXI SHARED + * @{ + */ +#define OB_TCM_AXI_SHARED_ITCM64KB 0x00000000U /*!< 64KB ITCM / 320KB system AXI */ +#define OB_TCM_AXI_SHARED_ITCM128KB FLASH_OPTSR2_TCM_AXI_SHARED_0 /*!< 128KB ITCM / 256KB system AXI */ +#define OB_TCM_AXI_SHARED_ITCM192KB FLASH_OPTSR2_TCM_AXI_SHARED_1 /*!< 192KB ITCM / 192KB system AXI */ +#define OB_TCM_AXI_SHARED_ITCM256KB FLASH_OPTSR2_TCM_AXI_SHARED /*!< 256KB ITCM / 128KB system AXI */ +/** + * @} + */ +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + + /** @defgroup FLASHEx_OB_USER_Type FLASHEx OB USER Type + * @{ + */ +#define OB_USER_IWDG1_SW 0x0001U /*!< Independent watchdog selection */ +#define OB_USER_NRST_STOP_D1 0x0002U /*!< Reset when entering Stop mode selection*/ +#define OB_USER_NRST_STDBY_D1 0x0004U /*!< Reset when entering standby mode selection*/ +#define OB_USER_IWDG_STOP 0x0008U /*!< Independent watchdog counter freeze in stop mode */ +#define OB_USER_IWDG_STDBY 0x0010U /*!< Independent watchdog counter freeze in standby mode */ +#define OB_USER_ST_RAM_SIZE 0x0020U /*!< dedicated DTCM Ram size selection */ +#define OB_USER_SECURITY 0x0040U /*!< security selection */ +#define OB_USER_IOHSLV 0x0080U /*!< IO HSLV selection */ +#if defined (DUAL_BANK) +#define OB_USER_SWAP_BANK 0x0100U /*!< Bank swap selection */ +#endif /* DUAL_BANK */ +#if defined (FLASH_OPTSR_VDDMMC_HSLV) +#define OB_USER_VDDMMC_HSLV 0x0200U /*!< VDDMMC HSLV selection */ +#endif /* FLASH_OPTSR_VDDMMC_HSLV */ +#if defined (DUAL_CORE) +#define OB_USER_IWDG2_SW 0x0200U /*!< Window watchdog selection */ +#define OB_USER_BCM4 0x0400U /*!< CM4 boot selection */ +#define OB_USER_BCM7 0x0800U /*!< CM7 boot selection */ +#endif /*DUAL_CORE*/ +#if defined (FLASH_OPTSR_NRST_STOP_D2) +#define OB_USER_NRST_STOP_D2 0x1000U /*!< Reset when entering Stop mode selection */ +#define OB_USER_NRST_STDBY_D2 0x2000U /*!< Reset when entering standby mode selection */ +#endif /* FLASH_OPTSR_NRST_STOP_D2 */ + +#if defined (DUAL_CORE) +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV | OB_USER_SWAP_BANK |\ + OB_USER_IWDG2_SW | OB_USER_BCM4 | OB_USER_BCM7 |\ + OB_USER_NRST_STOP_D2 | OB_USER_NRST_STDBY_D2) +#elif defined (FLASH_OPTSR_VDDMMC_HSLV) +#if defined (DUAL_BANK) +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV | OB_USER_SWAP_BANK |\ + OB_USER_VDDMMC_HSLV) +#else +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV |\ + OB_USER_VDDMMC_HSLV) +#endif /* DUAL_BANK */ +#elif defined (FLASH_OPTSR2_TCM_AXI_SHARED) +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV |\ + OB_USER_NRST_STOP_D2 | OB_USER_NRST_STDBY_D2) +#else /* Single core */ +#if defined (DUAL_BANK) +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV | OB_USER_SWAP_BANK ) +#else +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV ) +#endif /* DUAL_BANK */ +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_BOOT_OPTION FLASHEx OB BOOT OPTION + * @{ + */ +#define OB_BOOT_ADD0 0x01U /*!< Select Boot Address 0 */ +#define OB_BOOT_ADD1 0x02U /*!< Select Boot Address 1 */ +#define OB_BOOT_ADD_BOTH 0x03U /*!< Select Boot Address 0 and 1 */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_SECURE_RDP FLASHEx OB SECURE RDP + * @{ + */ +#define OB_SECURE_RDP_NOT_ERASE 0x00000000U /*!< Secure area is not erased when the RDP level + is decreased from Level 1 to Level 0 or during a mass erase */ +#define OB_SECURE_RDP_ERASE FLASH_SCAR_DMES /*!< Secure area is erased when the RDP level is + decreased from Level 1 to Level 0 (full mass erase) */ +/** + * @} + */ + +/** @defgroup FLASHEx_CRC_Selection_Type FLASH CRC Selection Type + * @{ + */ +#define FLASH_CRC_ADDR 0x00000000U /*!< CRC selection type by address */ +#define FLASH_CRC_SECTORS FLASH_CRCCR_CRC_BY_SECT /*!< CRC selection type by sectors */ +#define FLASH_CRC_BANK (FLASH_CRCCR_ALL_BANK | FLASH_CRCCR_CRC_BY_SECT) /*!< CRC selection type by bank */ +/** + * @} + */ + +/** @defgroup FLASHEx_CRC_Burst_Size FLASH CRC Burst Size + * @{ + */ +#define FLASH_CRC_BURST_SIZE_4 0x00000000U /*!< Every burst has a size of 4 Flash words (256-bit) */ +#define FLASH_CRC_BURST_SIZE_16 FLASH_CRCCR_CRC_BURST_0 /*!< Every burst has a size of 16 Flash words (256-bit) */ +#define FLASH_CRC_BURST_SIZE_64 FLASH_CRCCR_CRC_BURST_1 /*!< Every burst has a size of 64 Flash words (256-bit) */ +#define FLASH_CRC_BURST_SIZE_256 FLASH_CRCCR_CRC_BURST /*!< Every burst has a size of 256 Flash words (256-bit) */ +/** + * @} + */ + +/** @defgroup FLASHEx_Programming_Delay FLASH Programming Delay + * @{ + */ +#define FLASH_PROGRAMMING_DELAY_0 0x00000000U /*!< programming delay set for Flash running at 70 MHz or below */ +#define FLASH_PROGRAMMING_DELAY_1 FLASH_ACR_WRHIGHFREQ_0 /*!< programming delay set for Flash running between 70 MHz and 185 MHz */ +#define FLASH_PROGRAMMING_DELAY_2 FLASH_ACR_WRHIGHFREQ_1 /*!< programming delay set for Flash running between 185 MHz and 225 MHz */ +#define FLASH_PROGRAMMING_DELAY_3 FLASH_ACR_WRHIGHFREQ /*!< programming delay set for Flash at startup */ +/** + * @} + */ + +#if defined (FLASH_OTPBL_LOCKBL) +/** @defgroup FLASHEx_OTP_Blocks FLASH OTP blocks + * @{ + */ +#define FLASH_OTP_BLOCK_0 0x00000001U /*!< OTP Block0 */ +#define FLASH_OTP_BLOCK_1 0x00000002U /*!< OTP Block1 */ +#define FLASH_OTP_BLOCK_2 0x00000004U /*!< OTP Block2 */ +#define FLASH_OTP_BLOCK_3 0x00000008U /*!< OTP Block3 */ +#define FLASH_OTP_BLOCK_4 0x00000010U /*!< OTP Block4 */ +#define FLASH_OTP_BLOCK_5 0x00000020U /*!< OTP Block5 */ +#define FLASH_OTP_BLOCK_6 0x00000040U /*!< OTP Block6 */ +#define FLASH_OTP_BLOCK_7 0x00000080U /*!< OTP Block7 */ +#define FLASH_OTP_BLOCK_8 0x00000100U /*!< OTP Block8 */ +#define FLASH_OTP_BLOCK_9 0x00000200U /*!< OTP Block9 */ +#define FLASH_OTP_BLOCK_10 0x00000400U /*!< OTP Block10 */ +#define FLASH_OTP_BLOCK_11 0x00000800U /*!< OTP Block11 */ +#define FLASH_OTP_BLOCK_12 0x00001000U /*!< OTP Block12 */ +#define FLASH_OTP_BLOCK_13 0x00002000U /*!< OTP Block13 */ +#define FLASH_OTP_BLOCK_14 0x00004000U /*!< OTP Block14 */ +#define FLASH_OTP_BLOCK_15 0x00008000U /*!< OTP Block15 */ +#define FLASH_OTP_BLOCK_ALL 0x0000FFFFU /*!< OTP All Blocks */ +/** + * @} + */ +#endif /* FLASH_OTPBL_LOCKBL */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Macros FLASH Exported Macros + * @{ + */ +/** + * @brief Calculate the FLASH Boot Base Address (BOOT_ADD0 or BOOT_ADD1) + * @note Returned value BOOT_ADDx[15:0] corresponds to boot address [29:14]. + * @param __ADDRESS__: FLASH Boot Address (in the range 0x0000 0000 to 0x2004 FFFF with a granularity of 16KB) + * @retval The FLASH Boot Base Address + */ +#define __HAL_FLASH_CALC_BOOT_BASE_ADR(__ADDRESS__) ((__ADDRESS__) >> 14U) + +#if defined (FLASH_CR_PSIZE) +/** + * @brief Set the FLASH Program/Erase parallelism. + * @param __PSIZE__ FLASH Program/Erase parallelism + * This parameter can be a value of @ref FLASH_Program_Parallelism + * @param __BANK__: Flash bank (FLASH_BANK_1 or FLASH_BANK_2) + * @retval none + */ +#if defined (DUAL_BANK) +#define __HAL_FLASH_SET_PSIZE(__PSIZE__, __BANK__) (((__BANK__) == FLASH_BANK_1) ? \ + MODIFY_REG(FLASH->CR1, FLASH_CR_PSIZE, (__PSIZE__)) : \ + MODIFY_REG(FLASH->CR2, FLASH_CR_PSIZE, (__PSIZE__))) +#else +#define __HAL_FLASH_SET_PSIZE(__PSIZE__, __BANK__) MODIFY_REG(FLASH->CR1, FLASH_CR_PSIZE, (__PSIZE__)) +#endif /* DUAL_BANK */ + +/** + * @brief Get the FLASH Program/Erase parallelism. + * @param __BANK__ Flash bank (FLASH_BANK_1 or FLASH_BANK_2) + * @retval FLASH Program/Erase parallelism + * This return value can be a value of @ref FLASH_Program_Parallelism + */ +#if defined (DUAL_BANK) +#define __HAL_FLASH_GET_PSIZE(__BANK__) (((__BANK__) == FLASH_BANK_1) ? \ + READ_BIT((FLASH->CR1), FLASH_CR_PSIZE) : \ + READ_BIT((FLASH->CR2), FLASH_CR_PSIZE)) +#else +#define __HAL_FLASH_GET_PSIZE(__BANK__) READ_BIT((FLASH->CR1), FLASH_CR_PSIZE) +#endif /* DUAL_BANK */ + +#endif /* FLASH_CR_PSIZE */ + +/** + * @brief Set the FLASH Programming Delay. + * @param __DELAY__ FLASH Programming Delay + * This parameter can be a value of @ref FLASHEx_Programming_Delay + * @retval none + */ +#define __HAL_FLASH_SET_PROGRAM_DELAY(__DELAY__) MODIFY_REG(FLASH->ACR, FLASH_ACR_WRHIGHFREQ, (__DELAY__)) + +/** + * @brief Get the FLASH Programming Delay. + * @retval FLASH Programming Delay + * This return value can be a value of @ref FLASHEx_Programming_Delay + */ +#define __HAL_FLASH_GET_PROGRAM_DELAY() READ_BIT(FLASH->ACR, FLASH_ACR_WRHIGHFREQ) + /** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +/* Extension Program operation functions *************************************/ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); + +HAL_StatusTypeDef HAL_FLASHEx_Unlock_Bank1(void); +HAL_StatusTypeDef HAL_FLASHEx_Lock_Bank1(void); +#if defined (DUAL_BANK) +HAL_StatusTypeDef HAL_FLASHEx_Unlock_Bank2(void); +HAL_StatusTypeDef HAL_FLASHEx_Lock_Bank2(void); +#endif /* DUAL_BANK */ + +HAL_StatusTypeDef HAL_FLASHEx_ComputeCRC(FLASH_CRCInitTypeDef *pCRCInit, uint32_t *CRC_Result); + +/** + * @} + */ + +#if (USE_FLASH_ECC == 1U) +/** @addtogroup FLASHEx_Exported_Functions_Group3 + * @{ + */ +void HAL_FLASHEx_EnableEccCorrectionInterrupt(void); +void HAL_FLASHEx_DisableEccCorrectionInterrupt(void); +void HAL_FLASHEx_EnableEccCorrectionInterrupt_Bank1(void); +void HAL_FLASHEx_DisableEccCorrectionInterrupt_Bank1(void); +#if defined (DUAL_BANK) +void HAL_FLASHEx_EnableEccCorrectionInterrupt_Bank2(void); +void HAL_FLASHEx_DisableEccCorrectionInterrupt_Bank2(void); +#endif /* DUAL_BANK */ + +void HAL_FLASHEx_EnableEccDetectionInterrupt(void); +void HAL_FLASHEx_DisableEccDetectionInterrupt(void); +void HAL_FLASHEx_EnableEccDetectionInterrupt_Bank1(void); +void HAL_FLASHEx_DisableEccDetectionInterrupt_Bank1(void); +#if defined (DUAL_BANK) +void HAL_FLASHEx_EnableEccDetectionInterrupt_Bank2(void); +void HAL_FLASHEx_DisableEccDetectionInterrupt_Bank2(void); +#endif /* DUAL_BANK */ + +void HAL_FLASHEx_GetEccInfo(FLASH_EccInfoTypeDef *pData); +void HAL_FLASHEx_BusFault_IRQHandler(void); + +__weak void HAL_FLASHEx_EccDetectionCallback(void); +__weak void HAL_FLASHEx_EccCorrectionCallback(void); +/** + * @} + */ +#endif /* USE_FLASH_ECC */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ + +/** @defgroup FLASHEx_IS_FLASH_Definitions FLASHEx Private macros to check input parameters + * @{ + */ + +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_SECTORS) || \ + ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#if defined (FLASH_CR_PSIZE) +#define IS_VOLTAGERANGE(RANGE) (((RANGE) == FLASH_VOLTAGE_RANGE_1) || \ + ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \ + ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \ + ((RANGE) == FLASH_VOLTAGE_RANGE_4)) +#endif /* FLASH_CR_PSIZE */ + +#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \ + ((VALUE) == OB_WRPSTATE_ENABLE)) + +#define IS_OPTIONBYTE(VALUE) ((((VALUE) & OPTIONBYTE_ALL) != 0U) && \ + (((VALUE) & ~OPTIONBYTE_ALL) == 0U)) + +#define IS_OB_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= 0x8013U) + +#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ + ((LEVEL) == OB_RDP_LEVEL_1) ||\ + ((LEVEL) == OB_RDP_LEVEL_2)) + +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) + +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) + +#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE)) + +#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE)) + +#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL0) || ((LEVEL) == OB_BOR_LEVEL1) || \ + ((LEVEL) == OB_BOR_LEVEL2) || ((LEVEL) == OB_BOR_LEVEL3)) + +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \ + ((LATENCY) == FLASH_LATENCY_1) || \ + ((LATENCY) == FLASH_LATENCY_2) || \ + ((LATENCY) == FLASH_LATENCY_3) || \ + ((LATENCY) == FLASH_LATENCY_4) || \ + ((LATENCY) == FLASH_LATENCY_5) || \ + ((LATENCY) == FLASH_LATENCY_6) || \ + ((LATENCY) == FLASH_LATENCY_7) || \ + ((LATENCY) == FLASH_LATENCY_8) || \ + ((LATENCY) == FLASH_LATENCY_9) || \ + ((LATENCY) == FLASH_LATENCY_10) || \ + ((LATENCY) == FLASH_LATENCY_11) || \ + ((LATENCY) == FLASH_LATENCY_12) || \ + ((LATENCY) == FLASH_LATENCY_13) || \ + ((LATENCY) == FLASH_LATENCY_14) || \ + ((LATENCY) == FLASH_LATENCY_15)) + +#define IS_FLASH_SECTOR(SECTOR) ((SECTOR) < FLASH_SECTOR_TOTAL) + +#if (FLASH_SECTOR_TOTAL == 8U) +#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFFFFFF00U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#else +#define IS_OB_WRP_SECTOR(SECTOR) ((SECTOR) != 0x00000000U) +#endif /* FLASH_SECTOR_TOTAL == 8U */ + +#define IS_OB_PCROP_RDP(CONFIG) (((CONFIG) == OB_PCROP_RDP_NOT_ERASE) || \ + ((CONFIG) == OB_PCROP_RDP_ERASE)) + +#define IS_OB_SECURE_RDP(CONFIG) (((CONFIG) == OB_SECURE_RDP_NOT_ERASE) || \ + ((CONFIG) == OB_SECURE_RDP_ERASE)) + +#if defined (DUAL_BANK) +#define IS_OB_USER_SWAP_BANK(VALUE) (((VALUE) == OB_SWAP_BANK_DISABLE) || ((VALUE) == OB_SWAP_BANK_ENABLE)) +#endif /* DUAL_BANK */ + +#define IS_OB_USER_IOHSLV(VALUE) (((VALUE) == OB_IOHSLV_DISABLE) || ((VALUE) == OB_IOHSLV_ENABLE)) + +#if defined (FLASH_OPTSR_VDDMMC_HSLV) +#define IS_OB_USER_VDDMMC_HSLV(VALUE) (((VALUE) == OB_VDDMMC_HSLV_DISABLE) || ((VALUE) == OB_VDDMMC_HSLV_ENABLE)) +#endif /* FLASH_OPTSR_VDDMMC_HSLV */ + +#define IS_OB_IWDG1_SOURCE(SOURCE) (((SOURCE) == OB_IWDG1_SW) || ((SOURCE) == OB_IWDG1_HW)) +#if defined (DUAL_CORE) +#define IS_OB_IWDG2_SOURCE(SOURCE) (((SOURCE) == OB_IWDG2_SW) || ((SOURCE) == OB_IWDG2_HW)) +#endif /* DUAL_CORE */ +#define IS_OB_STOP_D1_RESET(VALUE) (((VALUE) == OB_STOP_NO_RST_D1) || ((VALUE) == OB_STOP_RST_D1)) + +#define IS_OB_STDBY_D1_RESET(VALUE) (((VALUE) == OB_STDBY_NO_RST_D1) || ((VALUE) == OB_STDBY_RST_D1)) + +#define IS_OB_USER_IWDG_STOP(VALUE) (((VALUE) == OB_IWDG_STOP_FREEZE) || ((VALUE) == OB_IWDG_STOP_ACTIVE)) + +#define IS_OB_USER_IWDG_STDBY(VALUE) (((VALUE) == OB_IWDG_STDBY_FREEZE) || ((VALUE) == OB_IWDG_STDBY_ACTIVE)) + +#define IS_OB_USER_ST_RAM_SIZE(VALUE) (((VALUE) == OB_ST_RAM_SIZE_2KB) || ((VALUE) == OB_ST_RAM_SIZE_4KB) || \ + ((VALUE) == OB_ST_RAM_SIZE_8KB) || ((VALUE) == OB_ST_RAM_SIZE_16KB)) + +#define IS_OB_USER_SECURITY(VALUE) (((VALUE) == OB_SECURITY_ENABLE) || ((VALUE) == OB_SECURITY_DISABLE)) + +#if defined (DUAL_CORE) +#define IS_OB_USER_BCM4(VALUE) (((VALUE) == OB_BCM4_DISABLE) || ((VALUE) == OB_BCM4_ENABLE)) + +#define IS_OB_USER_BCM7(VALUE) (((VALUE) == OB_BCM7_DISABLE) || ((VALUE) == OB_BCM7_ENABLE)) +#endif /* DUAL_CORE */ + +#if defined (FLASH_OPTSR_NRST_STOP_D2) +#define IS_OB_STOP_D2_RESET(VALUE) (((VALUE) == OB_STOP_NO_RST_D2) || ((VALUE) == OB_STOP_RST_D2)) + +#define IS_OB_STDBY_D2_RESET(VALUE) (((VALUE) == OB_STDBY_NO_RST_D2) || ((VALUE) == OB_STDBY_RST_D2)) +#endif /* FLASH_OPTSR_NRST_STOP_D2 */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +#define IS_OB_USER_TCM_AXI_SHARED(VALUE) (((VALUE) == OB_TCM_AXI_SHARED_ITCM64KB) || ((VALUE) == OB_TCM_AXI_SHARED_ITCM128KB) || \ + ((VALUE) == OB_TCM_AXI_SHARED_ITCM192KB) || ((VALUE) == OB_TCM_AXI_SHARED_ITCM256KB)) +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +#define IS_OB_USER_CPUFREQ_BOOST(VALUE) (((VALUE) == OB_CPUFREQ_BOOST_DISABLE) || ((VALUE) == OB_CPUFREQ_BOOST_ENABLE)) +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +#define IS_OB_USER_TYPE(TYPE) ((((TYPE) & OB_USER_ALL) != 0U) && \ + (((TYPE) & ~OB_USER_ALL) == 0U)) + +#define IS_OB_BOOT_ADD_OPTION(VALUE) (((VALUE) == OB_BOOT_ADD0) || \ + ((VALUE) == OB_BOOT_ADD1) || \ + ((VALUE) == OB_BOOT_ADD_BOTH)) + +#define IS_FLASH_TYPECRC(VALUE) (((VALUE) == FLASH_CRC_ADDR) || \ + ((VALUE) == FLASH_CRC_SECTORS) || \ + ((VALUE) == FLASH_CRC_BANK)) + +#if defined (FLASH_OTPBL_LOCKBL) +#define IS_OTP_BLOCK(VALUE) ((((VALUE) & 0xFFFF0000U) == 0x00000000U) && ((VALUE) != 0x00000000U)) +#endif /* FLASH_OTPBL_LOCKBL */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +void FLASH_Erase_Sector(uint32_t Sector, uint32_t Banks, uint32_t VoltageRange); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_FLASH_EX_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h new file mode 100644 index 0000000..1cd9178 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h @@ -0,0 +1,359 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_GPIO_H +#define STM32H7xx_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ + +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode_define */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull_define */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed_define */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_pins_define GPIO pins define + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode_define GPIO mode define + * @brief GPIO Configuration Mode + * Elements values convention: 0x00WX00YZ + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * @{ + */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ + +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed_define GPIO speed define + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH (0x00000002U) /*!< Fast speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003U) /*!< High speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull_define GPIO pull define + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */ +#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__: specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending flags. + * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending bits. + * @param __EXTI_LINE__: specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +#if defined(DUAL_CORE) +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__: specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTID2_GET_FLAG(__EXTI_LINE__) (EXTI->C2PR1 & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending flags. + * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTID2_CLEAR_FLAG(__EXTI_LINE__) (EXTI->C2PR1 = (__EXTI_LINE__)) + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTID2_GET_IT(__EXTI_LINE__) (EXTI->C2PR1 & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending bits. + * @param __EXTI_LINE__: specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTID2_CLEAR_IT(__EXTI_LINE__) (EXTI->C2PR1 = (__EXTI_LINE__)) +#endif + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) +/** + * @} + */ + +/* Include GPIO HAL Extension module */ +#include "stm32h7xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE_Pos 0u +#define GPIO_MODE (0x3uL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0uL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos) +#define MODE_AF (0x2uL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4u +#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16u +#define EXTI_MODE (0x3uL << EXTI_MODE_Pos) +#define EXTI_IT (0x1uL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2uL << EXTI_MODE_Pos) +#define TRIGGER_MODE_Pos 20u +#define TRIGGER_MODE (0x7uL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x2uL << TRIGGER_MODE_Pos) +#define TRIGGER_LEVEL (0x4uL << TRIGGER_MODE_Pos) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ + ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ + ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ + ((MODE) == GPIO_MODE_AF_PP) ||\ + ((MODE) == GPIO_MODE_AF_OD) ||\ + ((MODE) == GPIO_MODE_IT_RISING) ||\ + ((MODE) == GPIO_MODE_IT_FALLING) ||\ + ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING) ||\ + ((MODE) == GPIO_MODE_EVT_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_ANALOG)) +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \ + ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ + ((PULL) == GPIO_PULLDOWN)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Functions GPIO Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_GPIO_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h new file mode 100644 index 0000000..9d6cb56 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h @@ -0,0 +1,492 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_GPIO_EX_H +#define STM32H7xx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIOEx GPIOEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection + * @{ + */ + +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ +#if defined(PWR_CPUCR_RETDS_CD) /* CPU domain power down Deepsleep */ +#define GPIO_AF0_CSLEEP ((uint8_t)0x00) /* CSLEEP Alternate Function mapping */ +#define GPIO_AF0_CSTOP ((uint8_t)0x00) /* CSTOP Alternate Function mapping */ +#define GPIO_AF0_NDSTOP2 ((uint8_t)0x00) /* NDSTOP2 Alternate Function mapping */ +#endif /* PWR_CPUCR_RETDS_CD */ +#if defined(PWR_CPUCR_PDDS_D2) /* PWR D1 and D2 domains exists */ +#define GPIO_AF0_C1DSLEEP ((uint8_t)0x00) /* Cortex-M7 Deep Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */ +#define GPIO_AF0_C1SLEEP ((uint8_t)0x00) /* Cortex-M7 Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */ +#define GPIO_AF0_D1PWREN ((uint8_t)0x00) /* Domain 1 PWR enable Alternate Function mapping : available on STM32H7 Rev.B and above */ +#define GPIO_AF0_D2PWREN ((uint8_t)0x00) /* Domain 2 PWR enable Alternate Function mapping : available on STM32H7 Rev.B and above */ +#if defined(DUAL_CORE) +#define GPIO_AF0_C2DSLEEP ((uint8_t)0x00) /* Cortex-M4 Deep Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */ +#define GPIO_AF0_C2SLEEP ((uint8_t)0x00) /* Cortex-M4 Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */ +#endif /* DUAL_CORE */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */ +#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#if defined(HRTIM1) +#define GPIO_AF1_HRTIM1 ((uint8_t)0x01) /* HRTIM1 Alternate Function mapping */ +#endif /* HRTIM1 */ +#if defined(SAI4) +#define GPIO_AF1_SAI4 ((uint8_t)0x01) /* SAI4 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ +#endif /* SAI4 */ +#define GPIO_AF1_FMC ((uint8_t)0x01) /* FMC Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ + + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ +#define GPIO_AF2_TIM12 ((uint8_t)0x02) /* TIM12 Alternate Function mapping */ +#define GPIO_AF2_SAI1 ((uint8_t)0x02) /* SAI1 Alternate Function mapping */ +#if defined(HRTIM1) +#define GPIO_AF2_HRTIM1 ((uint8_t)0x02) /* HRTIM1 Alternate Function mapping */ +#endif /* HRTIM1 */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ +#if defined(FDCAN3) +#define GPIO_AF2_FDCAN3 ((uint8_t)0x02) /* FDCAN3 Alternate Function mapping */ +#endif /*FDCAN3*/ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_LPTIM2 ((uint8_t)0x03) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF3_DFSDM1 ((uint8_t)0x03) /* DFSDM Alternate Function mapping */ +#define GPIO_AF3_LPTIM3 ((uint8_t)0x03) /* LPTIM3 Alternate Function mapping */ +#define GPIO_AF3_LPTIM4 ((uint8_t)0x03) /* LPTIM4 Alternate Function mapping */ +#define GPIO_AF3_LPTIM5 ((uint8_t)0x03) /* LPTIM5 Alternate Function mapping */ +#define GPIO_AF3_LPUART ((uint8_t)0x03) /* LPUART Alternate Function mapping */ +#if defined(OCTOSPIM) +#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF3_OCTOSPIM_P2 ((uint8_t)0x03) /* OCTOSPI Manager Port 2 Alternate Function mapping */ +#endif /* OCTOSPIM */ +#if defined(HRTIM1) +#define GPIO_AF3_HRTIM1 ((uint8_t)0x03) /* HRTIM1 Alternate Function mapping */ +#endif /* HRTIM1 */ +#define GPIO_AF3_LTDC ((uint8_t)0x03) /* LTDC Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ +#if defined(I2C5) +#define GPIO_AF4_I2C5 ((uint8_t)0x04) /* I2C5 Alternate Function mapping */ +#endif /* I2C5*/ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /* TIM15 Alternate Function mapping */ +#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */ +#define GPIO_AF4_LPTIM2 ((uint8_t)0x04) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /* USART1 Alternate Function mapping */ +#if defined(USART10) +#define GPIO_AF4_USART10 ((uint8_t)0x04) /* USART10 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ +#endif /*USART10*/ +#define GPIO_AF4_DFSDM1 ((uint8_t)0x04) /* DFSDM Alternate Function mapping */ +#if defined(DFSDM2_BASE) +#define GPIO_AF4_DFSDM2 ((uint8_t)0x04) /* DFSDM2 Alternate Function mapping */ +#endif /* DFSDM2_BASE */ +#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ +#if defined(PSSI) +#define GPIO_AF4_PSSI ((uint8_t)0x04) /* PSSI Alternate Function mapping */ +#endif /* PSSI */ +#if defined(OCTOSPIM) +#define GPIO_AF4_OCTOSPIM_P1 ((uint8_t)0x04) /* OCTOSPI Manager Port 1 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ +#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ +#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ +#define GPIO_AF5_CEC ((uint8_t)0x05) /* CEC Alternate Function mapping */ +#if defined(FDCAN3) +#define GPIO_AF5_FDCAN3 ((uint8_t)0x05) /* FDCAN3 Alternate Function mapping */ +#endif /*FDCAN3*/ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ +#define GPIO_AF6_I2C4 ((uint8_t)0x06) /* I2C4 Alternate Function mapping */ +#if defined(I2C5) +#define GPIO_AF6_I2C5 ((uint8_t)0x06) /* I2C5 Alternate Function mapping */ +#endif /* I2C5*/ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM Alternate Function mapping */ +#define GPIO_AF6_UART4 ((uint8_t)0x06) /* UART4 Alternate Function mapping */ +#if defined(DFSDM2_BASE) +#define GPIO_AF6_DFSDM2 ((uint8_t)0x06) /* DFSDM2 Alternate Function mapping */ +#endif /* DFSDM2_BASE */ +#if defined(SAI3) +#define GPIO_AF6_SAI3 ((uint8_t)0x06) /* SAI3 Alternate Function mapping */ +#endif /* SAI3 */ +#if defined(OCTOSPIM) +#define GPIO_AF6_OCTOSPIM_P1 ((uint8_t)0x06) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2 Alternate Function mapping */ +#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3 Alternate Function mapping */ +#define GPIO_AF7_SPI6 ((uint8_t)0x07) /* SPI6 Alternate Function mapping */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_USART6 ((uint8_t)0x07) /* USART6 Alternate Function mapping */ +#define GPIO_AF7_UART7 ((uint8_t)0x07) /* UART7 Alternate Function mapping */ +#define GPIO_AF7_SDMMC1 ((uint8_t)0x07) /* SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_SPI6 ((uint8_t)0x08) /* SPI6 Alternate Function mapping */ +#if defined(SAI2) +#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */ +#endif /*SAI2*/ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ +#define GPIO_AF8_SPDIF ((uint8_t)0x08) /* SPDIF Alternate Function mapping */ +#define GPIO_AF8_LPUART ((uint8_t)0x08) /* LPUART Alternate Function mapping */ +#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ +#if defined(SAI4) +#define GPIO_AF8_SAI4 ((uint8_t)0x08) /* SAI4 Alternate Function mapping */ +#endif /* SAI4 */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_FDCAN1 ((uint8_t)0x09) /* FDCAN1 Alternate Function mapping */ +#define GPIO_AF9_FDCAN2 ((uint8_t)0x09) /* FDCAN2 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ +#define GPIO_AF9_SDMMC2 ((uint8_t)0x09) /* SDMMC2 Alternate Function mapping */ +#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */ +#define GPIO_AF9_SPDIF ((uint8_t)0x09) /* SPDIF Alternate Function mapping */ +#define GPIO_AF9_FMC ((uint8_t)0x09) /* FMC Alternate Function mapping */ +#if defined(QUADSPI) +#define GPIO_AF9_QUADSPI ((uint8_t)0x09) /* QUADSPI Alternate Function mapping */ +#endif /* QUADSPI */ +#if defined(SAI4) +#define GPIO_AF9_SAI4 ((uint8_t)0x09) /* SAI4 Alternate Function mapping */ +#endif /* SAI4 */ +#if defined(OCTOSPIM) +#define GPIO_AF9_OCTOSPIM_P1 ((uint8_t)0x09) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF9_OCTOSPIM_P2 ((uint8_t)0x09) /* OCTOSPI Manager Port 2 Alternate Function mapping */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 10 selection + */ +#if defined(SAI2) +#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */ +#endif /*SAI2*/ +#define GPIO_AF10_SDMMC2 ((uint8_t)0x0A) /* SDMMC2 Alternate Function mapping */ +#if defined(USB2_OTG_FS) +#define GPIO_AF10_OTG2_FS ((uint8_t)0x0A) /* OTG2_FS Alternate Function mapping */ +#endif /*USB2_OTG_FS*/ +#define GPIO_AF10_COMP1 ((uint8_t)0x0A) /* COMP1 Alternate Function mapping */ +#define GPIO_AF10_COMP2 ((uint8_t)0x0A) /* COMP2 Alternate Function mapping */ +#if defined(LTDC) +#define GPIO_AF10_LTDC ((uint8_t)0x0A) /* LTDC Alternate Function mapping */ +#endif /*LTDC*/ +#define GPIO_AF10_CRS_SYNC ((uint8_t)0x0A) /* CRS Sync Alternate Function mapping : available on STM32H7 Rev.B and above */ +#if defined(QUADSPI) +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ +#endif /* QUADSPI */ +#if defined(SAI4) +#define GPIO_AF10_SAI4 ((uint8_t)0x0A) /* SAI4 Alternate Function mapping */ +#endif /* SAI4 */ +#if !defined(USB2_OTG_FS) +#define GPIO_AF10_OTG1_FS ((uint8_t)0x0A) /* OTG1_FS Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ +#endif /* !USB2_OTG_FS */ +#define GPIO_AF10_OTG1_HS ((uint8_t)0x0A) /* OTG1_HS Alternate Function mapping */ +#if defined(OCTOSPIM) +#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#endif /* OCTOSPIM */ +#define GPIO_AF10_TIM8 ((uint8_t)0x0A) /* TIM8 Alternate Function mapping */ +#define GPIO_AF10_FMC ((uint8_t)0x0A) /* FMC Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_SWP ((uint8_t)0x0B) /* SWP Alternate Function mapping */ +#define GPIO_AF11_MDIOS ((uint8_t)0x0B) /* MDIOS Alternate Function mapping */ +#define GPIO_AF11_UART7 ((uint8_t)0x0B) /* UART7 Alternate Function mapping */ +#define GPIO_AF11_SDMMC2 ((uint8_t)0x0B) /* SDMMC2 Alternate Function mapping */ +#define GPIO_AF11_DFSDM1 ((uint8_t)0x0B) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF11_COMP1 ((uint8_t)0x0B) /* COMP1 Alternate Function mapping */ +#define GPIO_AF11_COMP2 ((uint8_t)0x0B) /* COMP2 Alternate Function mapping */ +#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */ +#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */ +#define GPIO_AF11_I2C4 ((uint8_t)0x0B) /* I2C4 Alternate Function mapping */ +#if defined(DFSDM2_BASE) +#define GPIO_AF11_DFSDM2 ((uint8_t)0x0B) /* DFSDM2 Alternate Function mapping */ +#endif /* DFSDM2_BASE */ +#if defined(USART10) +#define GPIO_AF11_USART10 ((uint8_t)0x0B) /* USART10 Alternate Function mapping */ +#endif /* USART10 */ +#if defined(UART9) +#define GPIO_AF11_UART9 ((uint8_t)0x0B) /* UART9 Alternate Function mapping */ +#endif /* UART9 */ +#if defined(ETH) +#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETH Alternate Function mapping */ +#endif /* ETH */ +#if defined(LTDC) +#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ +#endif /*LTDC*/ +#if defined(OCTOSPIM) +#define GPIO_AF11_OCTOSPIM_P1 ((uint8_t)0x0B) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF12_MDIOS ((uint8_t)0x0C) /* MDIOS Alternate Function mapping */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */ +#define GPIO_AF12_TIM8 ((uint8_t)0x0C) /* TIM8 Alternate Function mapping */ +#if defined(LTDC) +#define GPIO_AF12_LTDC ((uint8_t)0x0C) /* LTDC Alternate Function mapping */ +#endif /*LTDC*/ +#if defined(USB2_OTG_FS) +#define GPIO_AF12_OTG1_FS ((uint8_t)0x0C) /* OTG1_FS Alternate Function mapping */ +#endif /* USB2_OTG_FS */ +#if defined(OCTOSPIM) +#define GPIO_AF12_OCTOSPIM_P1 ((uint8_t)0x0C) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ +#define GPIO_AF13_COMP1 ((uint8_t)0x0D) /* COMP1 Alternate Function mapping */ +#define GPIO_AF13_COMP2 ((uint8_t)0x0D) /* COMP2 Alternate Function mapping */ +#if defined(LTDC) +#define GPIO_AF13_LTDC ((uint8_t)0x0D) /* LTDC Alternate Function mapping */ +#endif /*LTDC*/ +#if defined(DSI) +#define GPIO_AF13_DSI ((uint8_t)0x0D) /* DSI Alternate Function mapping */ +#endif /* DSI */ +#if defined(PSSI) +#define GPIO_AF13_PSSI ((uint8_t)0x0D) /* PSSI Alternate Function mapping */ +#endif /* PSSI */ +#define GPIO_AF13_TIM1 ((uint8_t)0x0D) /* TIM1 Alternate Function mapping */ +#if defined(TIM23) +#define GPIO_AF13_TIM23 ((uint8_t)0x0D) /* TIM23 Alternate Function mapping */ +#endif /*TIM23*/ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LTDC Alternate Function mapping */ +#define GPIO_AF14_UART5 ((uint8_t)0x0E) /* UART5 Alternate Function mapping */ +#if defined(TIM24) +#define GPIO_AF14_TIM24 ((uint8_t)0x0E) /* TIM24 Alternate Function mapping */ +#endif /*TIM24*/ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + + + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros + * @{ + */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions + * @{ + */ +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Constants GPIO Private Constants + * @{ + */ + +/** + * @brief GPIO pin available on the platform + */ +/* Defines the available pins per GPIOs */ +#define GPIOA_PIN_AVAILABLE GPIO_PIN_All +#define GPIOB_PIN_AVAILABLE GPIO_PIN_All +#define GPIOC_PIN_AVAILABLE GPIO_PIN_All +#define GPIOD_PIN_AVAILABLE GPIO_PIN_All +#define GPIOE_PIN_AVAILABLE GPIO_PIN_All +#define GPIOF_PIN_AVAILABLE GPIO_PIN_All +#define GPIOG_PIN_AVAILABLE GPIO_PIN_All +#if defined(GPIOI) +#define GPIOI_PIN_AVAILABLE GPIO_PIN_All +#endif /*GPIOI*/ +#if defined(GPIOI) +#define GPIOJ_PIN_AVAILABLE GPIO_PIN_All +#else +#define GPIOJ_PIN_AVAILABLE (GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 ) +#endif /* GPIOI */ +#define GPIOH_PIN_AVAILABLE GPIO_PIN_All +#if defined(GPIOI) +#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \ + GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7) +#else +#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 ) +#endif /* GPIOI */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Macros GPIO Private Macros + * @{ + */ +/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index + * @{ + */ +#if defined(GPIOI) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0UL :\ + ((__GPIOx__) == (GPIOB))? 1UL :\ + ((__GPIOx__) == (GPIOC))? 2UL :\ + ((__GPIOx__) == (GPIOD))? 3UL :\ + ((__GPIOx__) == (GPIOE))? 4UL :\ + ((__GPIOx__) == (GPIOF))? 5UL :\ + ((__GPIOx__) == (GPIOG))? 6UL :\ + ((__GPIOx__) == (GPIOH))? 7UL :\ + ((__GPIOx__) == (GPIOI))? 8UL :\ + ((__GPIOx__) == (GPIOJ))? 9UL : 10UL) +#else +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0UL :\ + ((__GPIOx__) == (GPIOB))? 1UL :\ + ((__GPIOx__) == (GPIOC))? 2UL :\ + ((__GPIOx__) == (GPIOD))? 3UL :\ + ((__GPIOx__) == (GPIOE))? 4UL :\ + ((__GPIOx__) == (GPIOF))? 5UL :\ + ((__GPIOx__) == (GPIOG))? 6UL :\ + ((__GPIOx__) == (GPIOH))? 7UL :\ + ((__GPIOx__) == (GPIOJ))? 9UL : 10UL) +#endif /* GPIOI */ + +/** + * @} + */ + +/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Functions GPIO Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_GPIO_EX_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h new file mode 100644 index 0000000..45f6e07 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h @@ -0,0 +1,211 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_hsem.h + * @author MCD Application Team + * @brief Header file of HSEM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_HSEM_H +#define STM32H7xx_HAL_HSEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup HSEM + * @{ + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HSEM_Exported_Macros HSEM Exported Macros + * @{ + */ + +/** + * @brief SemID to mask helper Macro. + * @param __SEMID__: semaphore ID from 0 to 31 + * @retval Semaphore Mask. + */ +#define __HAL_HSEM_SEMID_TO_MASK(__SEMID__) (1 << (__SEMID__)) + +/** + * @brief Enables the specified HSEM interrupts. + * @param __SEM_MASK__: semaphores Mask + * @retval None. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + (HSEM->C1IER |= (__SEM_MASK__)) : \ + (HSEM->C2IER |= (__SEM_MASK__))) +#else +#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) (HSEM->IER |= (__SEM_MASK__)) +#endif /* DUAL_CORE */ +/** + * @brief Disables the specified HSEM interrupts. + * @param __SEM_MASK__: semaphores Mask + * @retval None. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + (HSEM->C1IER &= ~(__SEM_MASK__)) : \ + (HSEM->C2IER &= ~(__SEM_MASK__))) +#else +#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) (HSEM->IER &= ~(__SEM_MASK__)) +#endif /* DUAL_CORE */ + +/** + * @brief Checks whether interrupt has occurred or not for semaphores specified by a mask. + * @param __SEM_MASK__: semaphores Mask + * @retval semaphores Mask : Semaphores where an interrupt occurred. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + ((__SEM_MASK__) & HSEM->C1MISR) : \ + ((__SEM_MASK__) & HSEM->C2MISR1)) +#else +#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((__SEM_MASK__) & HSEM->MISR) +#endif /* DUAL_CORE */ + +/** + * @brief Get the semaphores release status flags. + * @param __SEM_MASK__: semaphores Mask + * @retval semaphores Mask : Semaphores where Release flags rise. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + (__SEM_MASK__) & HSEM->C1ISR : \ + (__SEM_MASK__) & HSEM->C2ISR) +#else +#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((__SEM_MASK__) & HSEM->ISR) +#endif /* DUAL_CORE */ + +/** + * @brief Clears the HSEM Interrupt flags. + * @param __SEM_MASK__: semaphores Mask + * @retval None. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + (HSEM->C1ICR |= (__SEM_MASK__)) : \ + (HSEM->C2ICR |= (__SEM_MASK__))) +#else +#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) (HSEM->ICR |= (__SEM_MASK__)) +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup HSEM_Exported_Functions HSEM Exported Functions + * @{ + */ + +/** @addtogroup HSEM_Exported_Functions_Group1 Take and Release functions + * @brief HSEM Take and Release functions + * @{ + */ + +/* HSEM semaphore take (lock) using 2-Step method ****************************/ +HAL_StatusTypeDef HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID); +/* HSEM semaphore fast take (lock) using 1-Step method ***********************/ +HAL_StatusTypeDef HAL_HSEM_FastTake(uint32_t SemID); +/* HSEM Release **************************************************************/ +void HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID); +/* HSEM Release All************************************************************/ +void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID); +/* HSEM Check semaphore state Taken or not **********************************/ +uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID); + +/** + * @} + */ + +/** @addtogroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions + * @brief HSEM Set and Get Key functions. + * @{ + */ +/* HSEM Set Clear Key *********************************************************/ +void HAL_HSEM_SetClearKey(uint32_t Key); +/* HSEM Get Clear Key *********************************************************/ +uint32_t HAL_HSEM_GetClearKey(void); +/** + * @} + */ + +/** @addtogroup HSEM_Exported_Functions_Group3 + * @brief HSEM Notification functions + * @{ + */ +/* HSEM Activate HSEM Notification (When a semaphore is released) ) *****************/ +void HAL_HSEM_ActivateNotification(uint32_t SemMask); +/* HSEM Deactivate HSEM Notification (When a semaphore is released) ****************/ +void HAL_HSEM_DeactivateNotification(uint32_t SemMask); +/* HSEM Free Callback (When a semaphore is released) *******************************/ +void HAL_HSEM_FreeCallback(uint32_t SemMask); +/* HSEM IRQ Handler **********************************************************/ +void HAL_HSEM_IRQHandler(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup HSEM_Private_Macros HSEM Private Macros + * @{ + */ + +#define IS_HSEM_SEMID(__SEMID__) ((__SEMID__) <= HSEM_SEMID_MAX ) + +#define IS_HSEM_PROCESSID(__PROCESSID__) ((__PROCESSID__) <= HSEM_PROCESSID_MAX ) + +#define IS_HSEM_KEY(__KEY__) ((__KEY__) <= HSEM_CLEAR_KEY_MAX ) + +#if defined(DUAL_CORE) +#define IS_HSEM_COREID(__COREID__) (((__COREID__) == HSEM_CPU1_COREID) || \ + ((__COREID__) == HSEM_CPU2_COREID)) +#else +#define IS_HSEM_COREID(__COREID__) ((__COREID__) == HSEM_CPU1_COREID) +#endif + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_HSEM_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h new file mode 100644 index 0000000..c524cbc --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h @@ -0,0 +1,838 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_I2C_H +#define STM32H7xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization section + in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing + mode is selected. + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); +/*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32h7xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ + >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ + >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_ADD10) | (I2C_CR2_START) | \ + (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32h7xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7xx_HAL_I2C_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h new file mode 100644 index 0000000..e701b8b --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_I2C_EX_H +#define STM32H7xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_PMCR_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_PMCR_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define I2C_FASTMODEPLUS_PB8 SYSCFG_PMCR_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_PMCR_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_PMCR_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_PMCR_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ +#define I2C_FASTMODEPLUS_I2C3 SYSCFG_PMCR_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#define I2C_FASTMODEPLUS_I2C4 SYSCFG_PMCR_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */ +#if defined(SYSCFG_PMCR_I2C5_FMP) +#define I2C_FASTMODEPLUS_I2C5 SYSCFG_PMCR_I2C5_FMP /*!< Enable Fast Mode Plus on I2C5 pins */ +#else +#define I2C_FASTMODEPLUS_I2C5 (uint32_t)(0x00001000U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C5 not supported */ +#endif /* SYSCFG_PMCR_I2C5_FMP */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4)) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32h7xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_I2C_EX_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc.h new file mode 100644 index 0000000..d5b4a66 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc.h @@ -0,0 +1,719 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_ltdc.h + * @author MCD Application Team + * @brief Header file of LTDC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_LTDC_H +#define STM32H7xx_HAL_LTDC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +#if defined (LTDC) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup LTDC LTDC + * @brief LTDC HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup LTDC_Exported_Types LTDC Exported Types + * @{ + */ +#define MAX_LAYER 2U + +/** + * @brief LTDC color structure definition + */ +typedef struct +{ + uint8_t Blue; /*!< Configures the blue value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint8_t Green; /*!< Configures the green value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint8_t Red; /*!< Configures the red value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint8_t Reserved; /*!< Reserved 0xFF */ +} LTDC_ColorTypeDef; + +/** + * @brief LTDC Init structure definition + */ +typedef struct +{ + uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity. + This parameter can be one value of @ref LTDC_HS_POLARITY */ + + uint32_t VSPolarity; /*!< configures the vertical synchronization polarity. + This parameter can be one value of @ref LTDC_VS_POLARITY */ + + uint32_t DEPolarity; /*!< configures the data enable polarity. + This parameter can be one of value of @ref LTDC_DE_POLARITY */ + + uint32_t PCPolarity; /*!< configures the pixel clock polarity. + This parameter can be one of value of @ref LTDC_PC_POLARITY */ + + uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0xFFF. */ + + uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0x7FF. */ + + uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width. + This parameter must be a number between + Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */ + + uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height. + This parameter must be a number between + Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */ + + uint32_t AccumulatedActiveW; /*!< configures the accumulated active width. + This parameter must be a number between + Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */ + + uint32_t AccumulatedActiveH; /*!< configures the accumulated active height. + This parameter must be a number between + Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */ + + uint32_t TotalWidth; /*!< configures the total width. + This parameter must be a number between + Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */ + + uint32_t TotalHeigh; /*!< configures the total height. + This parameter must be a number between + Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */ + + LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */ +} LTDC_InitTypeDef; + +/** + * @brief LTDC Layer structure definition + */ +typedef struct +{ + uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0xFFF. */ + + uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0xFFF. */ + + uint32_t WindowY0; /*!< Configures the Window vertical Start Position. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0x7FF. */ + + uint32_t WindowY1; /*!< Configures the Window vertical Stop Position. + This parameter must be a number between + Min_Data = 0x0000 and Max_Data = 0x7FF. */ + + uint32_t PixelFormat; /*!< Specifies the pixel format. + This parameter can be one of value of @ref LTDC_Pixelformat */ + + uint32_t Alpha; /*!< Specifies the constant alpha used for blending. + This parameter must be a number between + Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint32_t Alpha0; /*!< Configures the default alpha value. + This parameter must be a number between + Min_Data = 0x00 and Max_Data = 0xFF. */ + + uint32_t BlendingFactor1; /*!< Select the blending factor 1. + This parameter can be one of value of @ref LTDC_BlendingFactor1 */ + + uint32_t BlendingFactor2; /*!< Select the blending factor 2. + This parameter can be one of value of @ref LTDC_BlendingFactor2 */ + + uint32_t FBStartAdress; /*!< Configures the color frame buffer address */ + + uint32_t ImageWidth; /*!< Configures the color frame buffer line length. + This parameter must be a number between + Min_Data = 0x0000 and Max_Data = 0x1FFF. */ + + uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer. + This parameter must be a number between + Min_Data = 0x000 and Max_Data = 0x7FF. */ + + LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */ +} LTDC_LayerCfgTypeDef; + +/** + * @brief HAL LTDC State structures definition + */ +typedef enum +{ + HAL_LTDC_STATE_RESET = 0x00U, /*!< LTDC not yet initialized or disabled */ + HAL_LTDC_STATE_READY = 0x01U, /*!< LTDC initialized and ready for use */ + HAL_LTDC_STATE_BUSY = 0x02U, /*!< LTDC internal process is ongoing */ + HAL_LTDC_STATE_TIMEOUT = 0x03U, /*!< LTDC Timeout state */ + HAL_LTDC_STATE_ERROR = 0x04U /*!< LTDC state error */ +} HAL_LTDC_StateTypeDef; + +/** + * @brief LTDC handle Structure definition + */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +typedef struct __LTDC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ +{ + LTDC_TypeDef *Instance; /*!< LTDC Register base address */ + + LTDC_InitTypeDef Init; /*!< LTDC parameters */ + + LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */ + + HAL_LockTypeDef Lock; /*!< LTDC Lock */ + + __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */ + + __IO uint32_t ErrorCode; /*!< LTDC Error code */ + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + void (* LineEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Line Event Callback */ + void (* ReloadEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Reload Event Callback */ + void (* ErrorCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Error Callback */ + + void (* MspInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp Init callback */ + void (* MspDeInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp DeInit callback */ + +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + + +} LTDC_HandleTypeDef; + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL LTDC Callback ID enumeration definition + */ +typedef enum +{ + HAL_LTDC_MSPINIT_CB_ID = 0x00U, /*!< LTDC MspInit callback ID */ + HAL_LTDC_MSPDEINIT_CB_ID = 0x01U, /*!< LTDC MspDeInit callback ID */ + + HAL_LTDC_LINE_EVENT_CB_ID = 0x02U, /*!< LTDC Line Event Callback ID */ + HAL_LTDC_RELOAD_EVENT_CB_ID = 0x03U, /*!< LTDC Reload Callback ID */ + HAL_LTDC_ERROR_CB_ID = 0x04U /*!< LTDC Error Callback ID */ + +} HAL_LTDC_CallbackIDTypeDef; + +/** + * @brief HAL LTDC Callback pointer definition + */ +typedef void (*pLTDC_CallbackTypeDef)(LTDC_HandleTypeDef *hltdc); /*!< pointer to an LTDC callback function */ + +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LTDC_Exported_Constants LTDC Exported Constants + * @{ + */ + +/** @defgroup LTDC_Error_Code LTDC Error Code + * @{ + */ +#define HAL_LTDC_ERROR_NONE 0x00000000U /*!< LTDC No error */ +#define HAL_LTDC_ERROR_TE 0x00000001U /*!< LTDC Transfer error */ +#define HAL_LTDC_ERROR_FU 0x00000002U /*!< LTDC FIFO Underrun */ +#define HAL_LTDC_ERROR_TIMEOUT 0x00000020U /*!< LTDC Timeout error */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +#define HAL_LTDC_ERROR_INVALID_CALLBACK 0x00000040U /*!< LTDC Invalid Callback error */ +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup LTDC_Layer LTDC Layer + * @{ + */ +#define LTDC_LAYER_1 0x00000000U /*!< LTDC Layer 1 */ +#define LTDC_LAYER_2 0x00000001U /*!< LTDC Layer 2 */ +/** + * @} + */ + +/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY + * @{ + */ +#define LTDC_HSPOLARITY_AL 0x00000000U /*!< Horizontal Synchronization is active low. */ +#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */ +/** + * @} + */ + +/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY + * @{ + */ +#define LTDC_VSPOLARITY_AL 0x00000000U /*!< Vertical Synchronization is active low. */ +#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */ +/** + * @} + */ + +/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY + * @{ + */ +#define LTDC_DEPOLARITY_AL 0x00000000U /*!< Data Enable, is active low. */ +#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */ +/** + * @} + */ + +/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY + * @{ + */ +#define LTDC_PCPOLARITY_IPC 0x00000000U /*!< input pixel clock. */ +#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */ +/** + * @} + */ + +/** @defgroup LTDC_SYNC LTDC SYNC + * @{ + */ +#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16U) /*!< Horizontal synchronization width. */ +#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */ +/** + * @} + */ + +/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR + * @{ + */ +#define LTDC_COLOR 0x000000FFU /*!< Color mask */ +/** + * @} + */ + +/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1 + * @{ + */ +#define LTDC_BLENDING_FACTOR1_CA 0x00000400U /*!< Blending factor : Cte Alpha */ +#define LTDC_BLENDING_FACTOR1_PAxCA 0x00000600U /*!< Blending factor : Cte Alpha x Pixel Alpha*/ +/** + * @} + */ + +/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2 + * @{ + */ +#define LTDC_BLENDING_FACTOR2_CA 0x00000005U /*!< Blending factor : Cte Alpha */ +#define LTDC_BLENDING_FACTOR2_PAxCA 0x00000007U /*!< Blending factor : Cte Alpha x Pixel Alpha*/ +/** + * @} + */ + +/** @defgroup LTDC_Pixelformat LTDC Pixel format + * @{ + */ +#define LTDC_PIXEL_FORMAT_ARGB8888 0x00000000U /*!< ARGB8888 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_RGB888 0x00000001U /*!< RGB888 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_RGB565 0x00000002U /*!< RGB565 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_ARGB1555 0x00000003U /*!< ARGB1555 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_ARGB4444 0x00000004U /*!< ARGB4444 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_L8 0x00000005U /*!< L8 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_AL44 0x00000006U /*!< AL44 LTDC pixel format */ +#define LTDC_PIXEL_FORMAT_AL88 0x00000007U /*!< AL88 LTDC pixel format */ +/** + * @} + */ + +/** @defgroup LTDC_Alpha LTDC Alpha + * @{ + */ +#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Constant Alpha mask */ +/** + * @} + */ + +/** @defgroup LTDC_LAYER_Config LTDC LAYER Config + * @{ + */ +#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16U) /*!< LTDC Layer stop position */ +#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */ + +#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */ +#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */ +/** + * @} + */ + +/** @defgroup LTDC_Interrupts LTDC Interrupts + * @{ + */ +#define LTDC_IT_LI LTDC_IER_LIE /*!< LTDC Line Interrupt */ +#define LTDC_IT_FU LTDC_IER_FUIE /*!< LTDC FIFO Underrun Interrupt */ +#define LTDC_IT_TE LTDC_IER_TERRIE /*!< LTDC Transfer Error Interrupt */ +#define LTDC_IT_RR LTDC_IER_RRIE /*!< LTDC Register Reload Interrupt */ +/** + * @} + */ + +/** @defgroup LTDC_Flags LTDC Flags + * @{ + */ +#define LTDC_FLAG_LI LTDC_ISR_LIF /*!< LTDC Line Interrupt Flag */ +#define LTDC_FLAG_FU LTDC_ISR_FUIF /*!< LTDC FIFO Underrun interrupt Flag */ +#define LTDC_FLAG_TE LTDC_ISR_TERRIF /*!< LTDC Transfer Error interrupt Flag */ +#define LTDC_FLAG_RR LTDC_ISR_RRIF /*!< LTDC Register Reload interrupt Flag */ +/** + * @} + */ + +/** @defgroup LTDC_Reload_Type LTDC Reload Type + * @{ + */ +#define LTDC_RELOAD_IMMEDIATE LTDC_SRCR_IMR /*!< Immediate Reload */ +#define LTDC_RELOAD_VERTICAL_BLANKING LTDC_SRCR_VBR /*!< Vertical Blanking Reload */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LTDC_Exported_Macros LTDC Exported Macros + * @{ + */ + +/** @brief Reset LTDC handle state. + * @param __HANDLE__ LTDC handle + * @retval None + */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_LTDC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET) +#endif /*USE_HAL_LTDC_REGISTER_CALLBACKS */ + +/** + * @brief Enable the LTDC. + * @param __HANDLE__ LTDC handle + * @retval None. + */ +#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN) + +/** + * @brief Disable the LTDC. + * @param __HANDLE__ LTDC handle + * @retval None. + */ +#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN)) + +/** + * @brief Enable the LTDC Layer. + * @param __HANDLE__ LTDC handle + * @param __LAYER__ Specify the layer to be enabled. + * This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval None. + */ +#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR\ + |= (uint32_t)LTDC_LxCR_LEN) + +/** + * @brief Disable the LTDC Layer. + * @param __HANDLE__ LTDC handle + * @param __LAYER__ Specify the layer to be disabled. + * This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval None. + */ +#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR\ + &= ~(uint32_t)LTDC_LxCR_LEN) + +/** + * @brief Reload immediately all LTDC Layers. + * @param __HANDLE__ LTDC handle + * @retval None. + */ +#define __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR) + +/** + * @brief Reload during vertical blanking period all LTDC Layers. + * @param __HANDLE__ LTDC handle + * @retval None. + */ +#define __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_VBR) + +/* Interrupt & Flag management */ +/** + * @brief Get the LTDC pending flags. + * @param __HANDLE__ LTDC handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg LTDC_FLAG_LI: Line Interrupt flag + * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag + * @arg LTDC_FLAG_TE: Transfer Error interrupt flag + * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) + +/** + * @brief Clears the LTDC pending flags. + * @param __HANDLE__ LTDC handle + * @param __FLAG__ Specify the flag to clear. + * This parameter can be any combination of the following values: + * @arg LTDC_FLAG_LI: Line Interrupt flag + * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag + * @arg LTDC_FLAG_TE: Transfer Error interrupt flag + * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag + * @retval None + */ +#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** + * @brief Enables the specified LTDC interrupts. + * @param __HANDLE__ LTDC handle + * @param __INTERRUPT__ Specify the LTDC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg LTDC_IT_LI: Line Interrupt flag + * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag + * @arg LTDC_IT_TE: Transfer Error interrupt flag + * @arg LTDC_IT_RR: Register Reload Interrupt Flag + * @retval None + */ +#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** + * @brief Disables the specified LTDC interrupts. + * @param __HANDLE__ LTDC handle + * @param __INTERRUPT__ Specify the LTDC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg LTDC_IT_LI: Line Interrupt flag + * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag + * @arg LTDC_IT_TE: Transfer Error interrupt flag + * @arg LTDC_IT_RR: Register Reload Interrupt Flag + * @retval None + */ +#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified LTDC interrupt has occurred or not. + * @param __HANDLE__ LTDC handle + * @param __INTERRUPT__ Specify the LTDC interrupt source to check. + * This parameter can be one of the following values: + * @arg LTDC_IT_LI: Line Interrupt flag + * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag + * @arg LTDC_IT_TE: Transfer Error interrupt flag + * @arg LTDC_IT_RR: Register Reload Interrupt Flag + * @retval The state of INTERRUPT (SET or RESET). + */ +#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) +/** + * @} + */ + +/* Include LTDC HAL Extension module */ +#include "stm32h7xx_hal_ltdc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup LTDC_Exported_Functions + * @{ + */ +/** @addtogroup LTDC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc); +HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc); +void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID, + pLTDC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup LTDC_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc); +/** + * @} + */ + +/** @addtogroup LTDC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line); +HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc); +HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc); +HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType); +HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, + uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); +HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); + +/** + * @} + */ + +/** @addtogroup LTDC_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc); +uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup LTDC_Private_Macros LTDC Private Macros + * @{ + */ +#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(\ + ((uint32_t)((__HANDLE__)->Instance))\ + + 0x84U + (0x80U*(__LAYER__))))) +#define IS_LTDC_LAYER(__LAYER__) ((__LAYER__) < MAX_LAYER) +#define IS_LTDC_HSPOL(__HSPOL__) (((__HSPOL__) == LTDC_HSPOLARITY_AL)\ + || ((__HSPOL__) == LTDC_HSPOLARITY_AH)) +#define IS_LTDC_VSPOL(__VSPOL__) (((__VSPOL__) == LTDC_VSPOLARITY_AL)\ + || ((__VSPOL__) == LTDC_VSPOLARITY_AH)) +#define IS_LTDC_DEPOL(__DEPOL__) (((__DEPOL__) == LTDC_DEPOLARITY_AL)\ + || ((__DEPOL__) == LTDC_DEPOLARITY_AH)) +#define IS_LTDC_PCPOL(__PCPOL__) (((__PCPOL__) == LTDC_PCPOLARITY_IPC)\ + || ((__PCPOL__) == LTDC_PCPOLARITY_IIPC)) +#define IS_LTDC_HSYNC(__HSYNC__) ((__HSYNC__) <= LTDC_HORIZONTALSYNC) +#define IS_LTDC_VSYNC(__VSYNC__) ((__VSYNC__) <= LTDC_VERTICALSYNC) +#define IS_LTDC_AHBP(__AHBP__) ((__AHBP__) <= LTDC_HORIZONTALSYNC) +#define IS_LTDC_AVBP(__AVBP__) ((__AVBP__) <= LTDC_VERTICALSYNC) +#define IS_LTDC_AAW(__AAW__) ((__AAW__) <= LTDC_HORIZONTALSYNC) +#define IS_LTDC_AAH(__AAH__) ((__AAH__) <= LTDC_VERTICALSYNC) +#define IS_LTDC_TOTALW(__TOTALW__) ((__TOTALW__) <= LTDC_HORIZONTALSYNC) +#define IS_LTDC_TOTALH(__TOTALH__) ((__TOTALH__) <= LTDC_VERTICALSYNC) +#define IS_LTDC_BLUEVALUE(__BBLUE__) ((__BBLUE__) <= LTDC_COLOR) +#define IS_LTDC_GREENVALUE(__BGREEN__) ((__BGREEN__) <= LTDC_COLOR) +#define IS_LTDC_REDVALUE(__BRED__) ((__BRED__) <= LTDC_COLOR) +#define IS_LTDC_BLENDING_FACTOR1(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_CA) || \ + ((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_PAxCA)) +#define IS_LTDC_BLENDING_FACTOR2(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_CA) || \ + ((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_PAxCA)) +#define IS_LTDC_PIXEL_FORMAT(__PIXEL_FORMAT__) (((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB8888) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB888) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB565) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB1555) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB4444) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_L8) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL44) || \ + ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL88)) +#define IS_LTDC_ALPHA(__ALPHA__) ((__ALPHA__) <= LTDC_ALPHA) +#define IS_LTDC_HCONFIGST(__HCONFIGST__) ((__HCONFIGST__) <= LTDC_STARTPOSITION) +#define IS_LTDC_HCONFIGSP(__HCONFIGSP__) ((__HCONFIGSP__) <= LTDC_STOPPOSITION) +#define IS_LTDC_VCONFIGST(__VCONFIGST__) ((__VCONFIGST__) <= LTDC_STARTPOSITION) +#define IS_LTDC_VCONFIGSP(__VCONFIGSP__) ((__VCONFIGSP__) <= LTDC_STOPPOSITION) +#define IS_LTDC_CFBP(__CFBP__) ((__CFBP__) <= LTDC_COLOR_FRAME_BUFFER) +#define IS_LTDC_CFBLL(__CFBLL__) ((__CFBLL__) <= LTDC_COLOR_FRAME_BUFFER) +#define IS_LTDC_CFBLNBR(__CFBLNBR__) ((__CFBLNBR__) <= LTDC_LINE_NUMBER) +#define IS_LTDC_LIPOS(__LIPOS__) ((__LIPOS__) <= 0x7FFU) +#define IS_LTDC_RELOAD(__RELOADTYPE__) (((__RELOADTYPE__) == LTDC_RELOAD_IMMEDIATE) || \ + ((__RELOADTYPE__) == LTDC_RELOAD_VERTICAL_BLANKING)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup LTDC_Private_Functions LTDC Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LTDC */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_LTDC_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc_ex.h new file mode 100644 index 0000000..15e9adf --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc_ex.h @@ -0,0 +1,83 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_ltdc_ex.h + * @author MCD Application Team + * @brief Header file of LTDC HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_LTDC_EX_H +#define STM32H7xx_HAL_LTDC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +#if defined (LTDC) && defined (DSI) + +#include "stm32h7xx_hal_dsi.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup LTDCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup LTDCEx_Exported_Functions + * @{ + */ + +/** @addtogroup LTDCEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg); +HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LTDC && DSI */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_LTDC_EX_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h new file mode 100644 index 0000000..a39cc0d --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h @@ -0,0 +1,868 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_mdma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_MDMA_H +#define STM32H7xx_HAL_MDMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup MDMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup MDMA_Exported_Types MDMA Exported Types + * @brief MDMA Exported Types + * @{ + */ + +/** + * @brief MDMA Configuration Structure definition + */ +typedef struct +{ + + uint32_t Request; /*!< Specifies the MDMA request. + This parameter can be a value of @ref MDMA_Request_selection*/ + + uint32_t TransferTriggerMode; /*!< Specifies the Trigger Transfer mode : each request triggers a : + a buffer transfer, a block transfer, a repeated block transfer or a linked list transfer + This parameter can be a value of @ref MDMA_Transfer_TriggerMode */ + + uint32_t Priority; /*!< Specifies the software priority for the MDMAy channelx. + This parameter can be a value of @ref MDMA_Priority_level */ + + uint32_t Endianness; /*!< Specifies if the MDMA transactions preserve the Little endianness. + This parameter can be a value of @ref MDMA_Endianness */ + + uint32_t SourceInc; /*!< Specifies if the Source increment mode . + This parameter can be a value of @ref MDMA_Source_increment_mode */ + + uint32_t DestinationInc; /*!< Specifies if the Destination increment mode . + This parameter can be a value of @ref MDMA_Destination_increment_mode */ + + uint32_t SourceDataSize; /*!< Specifies the source data size. + This parameter can be a value of @ref MDMA_Source_data_size */ + + uint32_t DestDataSize; /*!< Specifies the destination data size. + This parameter can be a value of @ref MDMA_Destination_data_size */ + + + uint32_t DataAlignment; /*!< Specifies the source to destination Memory data packing/padding mode. + This parameter can be a value of @ref MDMA_data_Alignment */ + + uint32_t BufferTransferLength; /*!< Specifies the buffer Transfer Length (number of bytes), + this is the number of bytes to be transferred in a single transfer (1 byte to 128 bytes)*/ + + uint32_t SourceBurst; /*!< Specifies the Burst transfer configuration for the source memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref MDMA_Source_burst + @note : the burst may be FIXED/INCR based on SourceInc value , + the BURST must be programmed as to ensure that the burst size will be lower than than + BufferTransferLength */ + + uint32_t DestBurst; /*!< Specifies the Burst transfer configuration for the destination memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref MDMA_Destination_burst + @note : the burst may be FIXED/INCR based on DestinationInc value , + the BURST must be programmed as to ensure that the burst size will be lower than than + BufferTransferLength */ + + int32_t SourceBlockAddressOffset; /*!< this field specifies the Next block source address offset + signed value : if > 0 then increment the next block source Address by offset from where the last block ends + if < 0 then decrement the next block source Address by offset from where the last block ends + if == 0, the next block source address starts from where the last block ends + */ + + + int32_t DestBlockAddressOffset; /*!< this field specifies the Next block destination address offset + signed value : if > 0 then increment the next block destination Address by offset from where the last block ends + if < 0 then decrement the next block destination Address by offset from where the last block ends + if == 0, the next block destination address starts from where the last block ends + */ + +}MDMA_InitTypeDef; + +/** + * @brief HAL MDMA linked list node structure definition + * @note The Linked list node allows to define a new MDMA configuration + * (CTCR ,CBNDTR ,CSAR ,CDAR ,CBRUR, CLAR, CTBR, CMAR and CMDR registers). + * When CLAR register is configured to a non NULL value , each time a transfer ends, + * a new configuration (linked list node) is automatically loaded from the address given in CLAR register. + */ +typedef struct +{ + __IO uint32_t CTCR; /*!< New CTCR register configuration for the given MDMA linked list node */ + __IO uint32_t CBNDTR; /*!< New CBNDTR register configuration for the given MDMA linked list node */ + __IO uint32_t CSAR; /*!< New CSAR register configuration for the given MDMA linked list node */ + __IO uint32_t CDAR; /*!< New CDAR register configuration for the given MDMA linked list node */ + __IO uint32_t CBRUR; /*!< New CBRUR register configuration for the given MDMA linked list node */ + __IO uint32_t CLAR; /*!< New CLAR register configuration for the given MDMA linked list node */ + __IO uint32_t CTBR; /*!< New CTBR register configuration for the given MDMA linked list node */ + __IO uint32_t Reserved; /*!< Reserved register */ + __IO uint32_t CMAR; /*!< New CMAR register configuration for the given MDMA linked list node */ + __IO uint32_t CMDR; /*!< New CMDR register configuration for the given MDMA linked list node */ + +}MDMA_LinkNodeTypeDef; + +/** + * @brief HAL MDMA linked list node configuration structure definition + * @note used with HAL_MDMA_LinkedList_CreateNode function + */ +typedef struct +{ + MDMA_InitTypeDef Init; /*!< configuration of the specified MDMA Linked List Node */ + uint32_t SrcAddress; /*!< The source memory address for the Linked list Node */ + uint32_t DstAddress; /*!< The destination memory address for the Linked list Node */ + uint32_t BlockDataLength; /*!< The data length of a block in bytes */ + uint32_t BlockCount; /*!< The number of blocks to be transferred */ + + uint32_t PostRequestMaskAddress; /*!< specifies the address to be updated (written) with PostRequestMaskData after a request is served. + PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served */ + + uint32_t PostRequestMaskData; /*!< specifies the value to be written to PostRequestMaskAddress after a request is served. + PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served */ + + +}MDMA_LinkNodeConfTypeDef; + + +/** + * @brief HAL MDMA State structure definition + */ +typedef enum +{ + HAL_MDMA_STATE_RESET = 0x00U, /*!< MDMA not yet initialized or disabled */ + HAL_MDMA_STATE_READY = 0x01U, /*!< MDMA initialized and ready for use */ + HAL_MDMA_STATE_BUSY = 0x02U, /*!< MDMA process is ongoing */ + HAL_MDMA_STATE_ERROR = 0x03U, /*!< MDMA error state */ + HAL_MDMA_STATE_ABORT = 0x04U, /*!< MDMA Abort state */ + +}HAL_MDMA_StateTypeDef; + +/** + * @brief HAL MDMA Level Complete structure definition + */ +typedef enum +{ + HAL_MDMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_MDMA_BUFFER_TRANSFER = 0x01U, /*!< Buffer Transfer */ + HAL_MDMA_BLOCK_TRANSFER = 0x02U, /*!< Block Transfer */ + HAL_MDMA_REPEAT_BLOCK_TRANSFER = 0x03U /*!< repeat block Transfer */ + +}HAL_MDMA_LevelCompleteTypeDef; + +/** + * @brief HAL MDMA Callbacks IDs structure definition + */ +typedef enum +{ + HAL_MDMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_MDMA_XFER_BUFFERCPLT_CB_ID = 0x01U, /*!< Buffer Transfer */ + HAL_MDMA_XFER_BLOCKCPLT_CB_ID = 0x02U, /*!< Block Transfer */ + HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID = 0x03U, /*!< Repeated Block Transfer */ + HAL_MDMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ + HAL_MDMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ + HAL_MDMA_XFER_ALL_CB_ID = 0x06U /*!< All */ + +}HAL_MDMA_CallbackIDTypeDef; + + +/** + * @brief MDMA handle Structure definition + */ +typedef struct __MDMA_HandleTypeDef +{ + MDMA_Channel_TypeDef *Instance; /*!< Register base address */ + + MDMA_InitTypeDef Init; /*!< MDMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< MDMA locking object */ + + __IO HAL_MDMA_StateTypeDef State; /*!< MDMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer complete callback */ + + void (* XferBufferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA buffer transfer complete callback */ + + void (* XferBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA block transfer complete callback */ + + void (* XferRepeatBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA block transfer repeat callback */ + + void (* XferErrorCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer error callback */ + + void (* XferAbortCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer Abort callback */ + + + MDMA_LinkNodeTypeDef *FirstLinkedListNodeAddress; /*!< specifies the first node address of the transfer list + (after the initial node defined by the Init struct) + this parameter is used internally by the MDMA driver + to construct the linked list node + */ + + MDMA_LinkNodeTypeDef *LastLinkedListNodeAddress; /*!< specifies the last node address of the transfer list + this parameter is used internally by the MDMA driver + to construct the linked list node + */ + uint32_t LinkedListNodeCounter; /*!< Number of nodes in the MDMA linked list */ + + __IO uint32_t ErrorCode; /*!< MDMA Error code */ + +} MDMA_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup MDMA_Exported_Constants MDMA Exported Constants + * @brief MDMA Exported constants + * @{ + */ + +/** @defgroup MDMA_Error_Codes MDMA Error Codes + * @brief MDMA Error Codes + * @{ + */ +#define HAL_MDMA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_MDMA_ERROR_READ_XFER ((uint32_t)0x00000001U) /*!< Read Transfer error */ +#define HAL_MDMA_ERROR_WRITE_XFER ((uint32_t)0x00000002U) /*!< Write Transfer error */ +#define HAL_MDMA_ERROR_MASK_DATA ((uint32_t)0x00000004U) /*!< Error Mask Data error */ +#define HAL_MDMA_ERROR_LINKED_LIST ((uint32_t)0x00000008U) /*!< Linked list Data error */ +#define HAL_MDMA_ERROR_ALIGNMENT ((uint32_t)0x00000010U) /*!< Address/Size alignment error */ +#define HAL_MDMA_ERROR_BLOCK_SIZE ((uint32_t)0x00000020U) /*!< Block Size error */ +#define HAL_MDMA_ERROR_TIMEOUT ((uint32_t)0x00000040U) /*!< Timeout error */ +#define HAL_MDMA_ERROR_NO_XFER ((uint32_t)0x00000080U) /*!< Abort or SW trigger requested with no Xfer ongoing */ +#define HAL_MDMA_ERROR_BUSY ((uint32_t)0x00000100U) /*!< DeInit or SW trigger requested with Xfer ongoing */ + +/** + * @} + */ + +/** @defgroup MDMA_Request_selection MDMA Request selection + * @brief MDMA_Request_selection + * @{ + */ + +#define MDMA_REQUEST_DMA1_Stream0_TC ((uint32_t)0x00000000U) /*!< MDMA HW request is DMA1 Stream 0 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream1_TC ((uint32_t)0x00000001U) /*!< MDMA HW request is DMA1 Stream 1 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream2_TC ((uint32_t)0x00000002U) /*!< MDMA HW request is DMA1 Stream 2 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream3_TC ((uint32_t)0x00000003U) /*!< MDMA HW request is DMA1 Stream 3 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream4_TC ((uint32_t)0x00000004U) /*!< MDMA HW request is DMA1 Stream 4 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream5_TC ((uint32_t)0x00000005U) /*!< MDMA HW request is DMA1 Stream 5 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream6_TC ((uint32_t)0x00000006U) /*!< MDMA HW request is DMA1 Stream 6 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream7_TC ((uint32_t)0x00000007U) /*!< MDMA HW request is DMA1 Stream 7 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream0_TC ((uint32_t)0x00000008U) /*!< MDMA HW request is DMA2 Stream 0 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream1_TC ((uint32_t)0x00000009U) /*!< MDMA HW request is DMA2 Stream 1 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream2_TC ((uint32_t)0x0000000AU) /*!< MDMA HW request is DMA2 Stream 2 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream3_TC ((uint32_t)0x0000000BU) /*!< MDMA HW request is DMA2 Stream 3 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream4_TC ((uint32_t)0x0000000CU) /*!< MDMA HW request is DMA2 Stream 4 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream5_TC ((uint32_t)0x0000000DU) /*!< MDMA HW request is DMA2 Stream 5 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream6_TC ((uint32_t)0x0000000EU) /*!< MDMA HW request is DMA2 Stream 6 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream7_TC ((uint32_t)0x0000000FU) /*!< MDMA HW request is DMA2 Stream 7 Transfer Complete Flag */ +#if defined (LTDC) +#define MDMA_REQUEST_LTDC_LINE_IT ((uint32_t)0x00000010U) /*!< MDMA HW request is LTDC Line interrupt Flag */ +#endif /* LTDC */ +#if defined (JPEG) +#define MDMA_REQUEST_JPEG_INFIFO_TH ((uint32_t)0x00000011U) /*!< MDMA HW request is JPEG Input FIFO threshold Flag */ +#define MDMA_REQUEST_JPEG_INFIFO_NF ((uint32_t)0x00000012U) /*!< MDMA HW request is JPEG Input FIFO not full Flag */ +#define MDMA_REQUEST_JPEG_OUTFIFO_TH ((uint32_t)0x00000013U) /*!< MDMA HW request is JPEG Output FIFO threshold Flag */ +#define MDMA_REQUEST_JPEG_OUTFIFO_NE ((uint32_t)0x00000014U) /*!< MDMA HW request is JPEG Output FIFO not empty Flag */ +#define MDMA_REQUEST_JPEG_END_CONVERSION ((uint32_t)0x00000015U) /*!< MDMA HW request is JPEG End of conversion Flag */ +#endif /* JPEG */ +#if defined (OCTOSPI1) +#define MDMA_REQUEST_OCTOSPI1_FIFO_TH ((uint32_t)0x00000016U) /*!< MDMA HW request is OCTOSPI1 FIFO threshold Flag */ +#define MDMA_REQUEST_OCTOSPI1_TC ((uint32_t)0x00000017U) /*!< MDMA HW request is OCTOSPI1 Transfer complete Flag */ +#endif /* OCTOSPI1 */ +#if defined (QUADSPI) +#define MDMA_REQUEST_QUADSPI_FIFO_TH ((uint32_t)0x00000016U) /*!< MDMA HW request is QSPI FIFO threshold Flag */ +#define MDMA_REQUEST_QUADSPI_TC ((uint32_t)0x00000017U) /*!< MDMA HW request is QSPI Transfer complete Flag */ +#endif /* QUADSPI */ +#define MDMA_REQUEST_DMA2D_CLUT_TC ((uint32_t)0x00000018U) /*!< MDMA HW request is DMA2D CLUT Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2D_TC ((uint32_t)0x00000019U) /*!< MDMA HW request is DMA2D Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2D_TW ((uint32_t)0x0000001AU) /*!< MDMA HW request is DMA2D Transfer Watermark Flag */ + +#if defined (DSI) +#define MDMA_REQUEST_DSI_TEARING_EFFECT ((uint32_t)0x0000001BU) /*!< MDMA HW request is DSI Tearing Effect Flag */ +#define MDMA_REQUEST_DSI_END_REFRESH ((uint32_t)0x0000001CU) /*!< MDMA HW request is DSI End of refresh Flag */ +#endif /* DSI */ + +#define MDMA_REQUEST_SDMMC1_END_DATA ((uint32_t)0x0000001DU) /*!< MDMA HW request is SDMMC1 End of Data Flag */ + +#define MDMA_REQUEST_SDMMC1_DMA_ENDBUFFER ((uint32_t)0x0000001EU) /*!< MDMA HW request is SDMMC1 Internal DMA buffer End Flag */ +#define MDMA_REQUEST_SDMMC1_COMMAND_END ((uint32_t)0x0000001FU) /*!< MDMA HW request is SDMMC1 Command End Flag */ + +#if defined (OCTOSPI2) +#define MDMA_REQUEST_OCTOSPI2_FIFO_TH ((uint32_t)0x00000020U) /*!< MDMA HW request is OCTOSPI2 FIFO threshold Flag */ +#define MDMA_REQUEST_OCTOSPI2_TC ((uint32_t)0x00000021U) /*!< MDMA HW request is OCTOSPI2 Transfer complete Flag */ +#endif /* OCTOSPI2 */ + +#define MDMA_REQUEST_SW ((uint32_t)0x40000000U) /*!< MDMA SW request */ + +/** + * @} + */ + +/** @defgroup MDMA_Transfer_TriggerMode MDMA Transfer Trigger Mode + * @brief MDMA Transfer Trigger Mode + * @{ + */ +#define MDMA_BUFFER_TRANSFER ((uint32_t)0x00000000U) /*!< Each MDMA request (SW or HW) triggers a buffer transfer */ +#define MDMA_BLOCK_TRANSFER ((uint32_t)MDMA_CTCR_TRGM_0) /*!< Each MDMA request (SW or HW) triggers a block transfer */ +#define MDMA_REPEAT_BLOCK_TRANSFER ((uint32_t)MDMA_CTCR_TRGM_1) /*!< Each MDMA request (SW or HW) triggers a repeated block transfer */ +#define MDMA_FULL_TRANSFER ((uint32_t)MDMA_CTCR_TRGM) /*!< Each MDMA request (SW or HW) triggers a Full transfer or a linked list transfer if any */ + +/** + * @} + */ + +/** @defgroup MDMA_Priority_level MDMA Priority level + * @brief MDMA Priority level + * @{ + */ +#define MDMA_PRIORITY_LOW ((uint32_t)0x00000000U) /*!< Priority level: Low */ +#define MDMA_PRIORITY_MEDIUM ((uint32_t)MDMA_CCR_PL_0) /*!< Priority level: Medium */ +#define MDMA_PRIORITY_HIGH ((uint32_t)MDMA_CCR_PL_1) /*!< Priority level: High */ +#define MDMA_PRIORITY_VERY_HIGH ((uint32_t)MDMA_CCR_PL) /*!< Priority level: Very High */ + +/** + * @} + */ + + +/** @defgroup MDMA_Endianness MDMA Endianness + * @brief MDMA Endianness + * @{ + */ +#define MDMA_LITTLE_ENDIANNESS_PRESERVE ((uint32_t)0x00000000U) /*!< little endianness preserve */ +#define MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_BEX) /*!< BYTEs endianness exchange when destination data size is > Byte */ +#define MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_HEX) /*!< HALF WORDs endianness exchange when destination data size is > HALF WORD */ +#define MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_WEX) /*!< WORDs endianness exchange when destination data size is > DOUBLE WORD */ + +/** + * @} + */ + +/** @defgroup MDMA_Source_increment_mode MDMA Source increment mode + * @brief MDMA Source increment mode + * @{ + */ +#define MDMA_SRC_INC_DISABLE ((uint32_t)0x00000000U) /*!< Source address pointer is fixed */ +#define MDMA_SRC_INC_BYTE ((uint32_t)MDMA_CTCR_SINC_1) /*!< Source address pointer is incremented by a BYTE (8 bits) */ +#define MDMA_SRC_INC_HALFWORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits) */ +#define MDMA_SRC_INC_WORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits) */ +#define MDMA_SRC_INC_DOUBLEWORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS) /*!< Source address pointer is incremented by a double Word (64 bits)) */ +#define MDMA_SRC_DEC_BYTE ((uint32_t)MDMA_CTCR_SINC) /*!< Source address pointer is decremented by a BYTE (8 bits) */ +#define MDMA_SRC_DEC_HALFWORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_0) /*!< Source address pointer is decremented by a half Word (16 bits) */ +#define MDMA_SRC_DEC_WORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_1) /*!< Source address pointer is decremented by a Word (32 bits) */ +#define MDMA_SRC_DEC_DOUBLEWORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS) /*!< Source address pointer is decremented by a double Word (64 bits)) */ + +/** + * @} + */ + +/** @defgroup MDMA_Destination_increment_mode MDMA Destination increment mode + * @brief MDMA Destination increment mode + * @{ + */ +#define MDMA_DEST_INC_DISABLE ((uint32_t)0x00000000U) /*!< Source address pointer is fixed */ +#define MDMA_DEST_INC_BYTE ((uint32_t)MDMA_CTCR_DINC_1) /*!< Source address pointer is incremented by a BYTE (8 bits) */ +#define MDMA_DEST_INC_HALFWORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits) */ +#define MDMA_DEST_INC_WORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits) */ +#define MDMA_DEST_INC_DOUBLEWORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS) /*!< Source address pointer is incremented by a double Word (64 bits)) */ +#define MDMA_DEST_DEC_BYTE ((uint32_t)MDMA_CTCR_DINC) /*!< Source address pointer is decremented by a BYTE (8 bits) */ +#define MDMA_DEST_DEC_HALFWORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_0) /*!< Source address pointer is decremented by a half Word (16 bits) */ +#define MDMA_DEST_DEC_WORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_1) /*!< Source address pointer is decremented by a Word (32 bits) */ +#define MDMA_DEST_DEC_DOUBLEWORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS) /*!< Source address pointer is decremented by a double Word (64 bits)) */ + +/** + * @} + */ + +/** @defgroup MDMA_Source_data_size MDMA Source data size + * @brief MDMA Source data size + * @{ + */ +#define MDMA_SRC_DATASIZE_BYTE ((uint32_t)0x00000000U) /*!< Source data size is Byte */ +#define MDMA_SRC_DATASIZE_HALFWORD ((uint32_t)MDMA_CTCR_SSIZE_0) /*!< Source data size is half word */ +#define MDMA_SRC_DATASIZE_WORD ((uint32_t)MDMA_CTCR_SSIZE_1) /*!< Source data size is word */ +#define MDMA_SRC_DATASIZE_DOUBLEWORD ((uint32_t)MDMA_CTCR_SSIZE) /*!< Source data size is double word */ + +/** + * @} + */ + +/** @defgroup MDMA_Destination_data_size MDMA Destination data size + * @brief MDMA Destination data size + * @{ + */ +#define MDMA_DEST_DATASIZE_BYTE ((uint32_t)0x00000000U) /*!< Destination data size is Byte */ +#define MDMA_DEST_DATASIZE_HALFWORD ((uint32_t)MDMA_CTCR_DSIZE_0) /*!< Destination data size is half word */ +#define MDMA_DEST_DATASIZE_WORD ((uint32_t)MDMA_CTCR_DSIZE_1) /*!< Destination data size is word */ +#define MDMA_DEST_DATASIZE_DOUBLEWORD ((uint32_t)MDMA_CTCR_DSIZE) /*!< Destination data size is double word */ + +/** + * @} + */ + +/** @defgroup MDMA_data_Alignment MDMA data alignment + * @brief MDMA data alignment + * @{ + */ +#define MDMA_DATAALIGN_PACKENABLE ((uint32_t)MDMA_CTCR_PKE) /*!< The source data is packed/un-packed into the destination data size + All data are right aligned, in Little Endien mode. */ +#define MDMA_DATAALIGN_RIGHT ((uint32_t)0x00000000U) /*!< Right Aligned, padded w/ 0s (default) */ +#define MDMA_DATAALIGN_RIGHT_SIGNED ((uint32_t)MDMA_CTCR_PAM_0) /*!< Right Aligned, Sign extended , + Note : this mode is allowed only if the Source data size is smaller than Destination data size */ +#define MDMA_DATAALIGN_LEFT ((uint32_t)MDMA_CTCR_PAM_1) /*!< Left Aligned (padded with 0s) */ + +/** + * @} + */ + +/** @defgroup MDMA_Source_burst MDMA Source burst + * @brief MDMA Source burst + * @{ + */ +#define MDMA_SOURCE_BURST_SINGLE ((uint32_t)0x00000000U) /*!< single transfer */ +#define MDMA_SOURCE_BURST_2BEATS ((uint32_t)MDMA_CTCR_SBURST_0) /*!< Burst 2 beats */ +#define MDMA_SOURCE_BURST_4BEATS ((uint32_t)MDMA_CTCR_SBURST_1) /*!< Burst 4 beats */ +#define MDMA_SOURCE_BURST_8BEATS ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_1) /*!< Burst 8 beats */ +#define MDMA_SOURCE_BURST_16BEATS ((uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 16 beats */ +#define MDMA_SOURCE_BURST_32BEATS ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 32 beats */ +#define MDMA_SOURCE_BURST_64BEATS ((uint32_t)MDMA_CTCR_SBURST_1 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 64 beats */ +#define MDMA_SOURCE_BURST_128BEATS ((uint32_t)MDMA_CTCR_SBURST) /*!< Burst 128 beats */ + +/** + * @} + */ + +/** @defgroup MDMA_Destination_burst MDMA Destination burst + * @brief MDMA Destination burst + * @{ + */ +#define MDMA_DEST_BURST_SINGLE ((uint32_t)0x00000000U) /*!< single transfer */ +#define MDMA_DEST_BURST_2BEATS ((uint32_t)MDMA_CTCR_DBURST_0) /*!< Burst 2 beats */ +#define MDMA_DEST_BURST_4BEATS ((uint32_t)MDMA_CTCR_DBURST_1) /*!< Burst 4 beats */ +#define MDMA_DEST_BURST_8BEATS ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_1) /*!< Burst 8 beats */ +#define MDMA_DEST_BURST_16BEATS ((uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 16 beats */ +#define MDMA_DEST_BURST_32BEATS ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 32 beats */ +#define MDMA_DEST_BURST_64BEATS ((uint32_t)MDMA_CTCR_DBURST_1 | (uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 64 beats */ +#define MDMA_DEST_BURST_128BEATS ((uint32_t)MDMA_CTCR_DBURST) /*!< Burst 128 beats */ + +/** + * @} + */ + +/** @defgroup MDMA_interrupt_enable_definitions MDMA interrupt enable definitions + * @brief MDMA interrupt enable definitions + * @{ + */ +#define MDMA_IT_TE ((uint32_t)MDMA_CCR_TEIE) /*!< Transfer Error interrupt */ +#define MDMA_IT_CTC ((uint32_t)MDMA_CCR_CTCIE) /*!< Channel Transfer Complete interrupt */ +#define MDMA_IT_BRT ((uint32_t)MDMA_CCR_BRTIE) /*!< Block Repeat Transfer interrupt */ +#define MDMA_IT_BT ((uint32_t)MDMA_CCR_BTIE) /*!< Block Transfer interrupt */ +#define MDMA_IT_BFTC ((uint32_t)MDMA_CCR_TCIE) /*!< Buffer Transfer Complete interrupt */ + +/** + * @} + */ + +/** @defgroup MDMA_flag_definitions MDMA flag definitions + * @brief MDMA flag definitions + * @{ + */ +#define MDMA_FLAG_TE ((uint32_t)MDMA_CISR_TEIF) /*!< Transfer Error flag */ +#define MDMA_FLAG_CTC ((uint32_t)MDMA_CISR_CTCIF) /*!< Channel Transfer Complete flag */ +#define MDMA_FLAG_BRT ((uint32_t)MDMA_CISR_BRTIF) /*!< Block Repeat Transfer complete flag */ +#define MDMA_FLAG_BT ((uint32_t)MDMA_CISR_BTIF) /*!< Block Transfer complete flag */ +#define MDMA_FLAG_BFTC ((uint32_t)MDMA_CISR_TCIF) /*!< BuFfer Transfer complete flag */ +#define MDMA_FLAG_CRQA ((uint32_t)MDMA_CISR_CRQA) /*!< Channel request Active flag */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup MDMA_Exported_Macros MDMA Exported Macros + * @{ + */ + +/** + * @brief Enable the specified MDMA Channel. + * @param __HANDLE__: MDMA handle + * @retval None + */ +#define __HAL_MDMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= MDMA_CCR_EN) + +/** + * @brief Disable the specified MDMA Channel. + * @param __HANDLE__: MDMA handle + * @retval None + */ +#define __HAL_MDMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~MDMA_CCR_EN) + +/** + * @brief Get the MDMA Channel pending flags. + * @param __HANDLE__: MDMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg MDMA_FLAG_TE : Transfer Error flag. + * @arg MDMA_FLAG_CTC : Channel Transfer Complete flag. + * @arg MDMA_FLAG_BRT : Block Repeat Transfer flag. + * @arg MDMA_FLAG_BT : Block Transfer complete flag. + * @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag. + * @arg MDMA_FLAG_CRQA : Channel request Active flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_MDMA_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CISR & (__FLAG__)) + +/** + * @brief Clear the MDMA Stream pending flags. + * @param __HANDLE__: MDMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg MDMA_FLAG_TE : Transfer Error flag. + * @arg MDMA_FLAG_CTC : Channel Transfer Complete flag. + * @arg MDMA_FLAG_BRT : Block Repeat Transfer flag. + * @arg MDMA_FLAG_BT : Block Transfer complete flag. + * @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag. + * @retval None + */ +#define __HAL_MDMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CIFCR = (__FLAG__)) + +/** + * @brief Enables the specified MDMA Channel interrupts. + * @param __HANDLE__: MDMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg MDMA_IT_TE : Transfer Error interrupt mask + * @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask + * @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask + * @arg MDMA_IT_BT : Block Transfer interrupt mask + * @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask + * @retval None + */ +#define __HAL_MDMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disables the specified MDMA Channel interrupts. + * @param __HANDLE__: MDMA handle + * @param __INTERRUPT__: specifies the MDMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg MDMA_IT_TE : Transfer Error interrupt mask + * @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask + * @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask + * @arg MDMA_IT_BT : Block Transfer interrupt mask + * @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask + * @retval None + */ +#define __HAL_MDMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified MDMA Channel interrupt is enabled or not. + * @param __HANDLE__: MDMA handle + * @param __INTERRUPT__: specifies the MDMA interrupt source to check. + * @arg MDMA_IT_TE : Transfer Error interrupt mask + * @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask + * @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask + * @arg MDMA_IT_BT : Block Transfer interrupt mask + * @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask + * @retval The state of MDMA_IT (SET or RESET). + */ +#define __HAL_MDMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Writes the number of data in bytes to be transferred on the MDMA Channelx. + * @param __HANDLE__ : MDMA handle + * @param __COUNTER__: Number of data in bytes to be transferred. + * @retval None + */ +#define __HAL_MDMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CBNDTR |= ((__COUNTER__) & MDMA_CBNDTR_BNDT)) + +/** + * @brief Returns the number of remaining data in bytes in the current MDMA Channelx transfer. + * @param __HANDLE__ : MDMA handle + * @retval The number of remaining data in bytes in the current MDMA Channelx transfer. + */ +#define __HAL_MDMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CBNDTR & MDMA_CBNDTR_BNDT) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MDMA_Exported_Functions MDMA Exported Functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +/** @defgroup MDMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_MDMA_Init(MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_DeInit (MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_ConfigPostRequestMask(MDMA_HandleTypeDef *hmdma, uint32_t MaskAddress, uint32_t MaskData); + +HAL_StatusTypeDef HAL_MDMA_RegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID, void (* pCallback)(MDMA_HandleTypeDef *_hmdma)); +HAL_StatusTypeDef HAL_MDMA_UnRegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/* Linked list operation functions ********************************************/ +/** @defgroup MDMA_Exported_Functions_Group2 Linked List operation functions + * @brief Linked list operation functions + * @{ + */ + +HAL_StatusTypeDef HAL_MDMA_LinkedList_CreateNode(MDMA_LinkNodeTypeDef *pNode, MDMA_LinkNodeConfTypeDef *pNodeConfig); +HAL_StatusTypeDef HAL_MDMA_LinkedList_AddNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNewNode, MDMA_LinkNodeTypeDef *pPrevNode); +HAL_StatusTypeDef HAL_MDMA_LinkedList_RemoveNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNode); +HAL_StatusTypeDef HAL_MDMA_LinkedList_EnableCircularMode(MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_LinkedList_DisableCircularMode(MDMA_HandleTypeDef *hmdma); + + +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @defgroup MDMA_Exported_Functions_Group3 I/O operation functions + * @brief I/O operation functions + * @{ + */ +HAL_StatusTypeDef HAL_MDMA_Start (MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount); +HAL_StatusTypeDef HAL_MDMA_Start_IT(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount); +HAL_StatusTypeDef HAL_MDMA_Abort(MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_Abort_IT(MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_PollForTransfer(MDMA_HandleTypeDef *hmdma, HAL_MDMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +HAL_StatusTypeDef HAL_MDMA_GenerateSWRequest(MDMA_HandleTypeDef *hmdma); +void HAL_MDMA_IRQHandler(MDMA_HandleTypeDef *hmdma); + +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @defgroup MDMA_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +HAL_MDMA_StateTypeDef HAL_MDMA_GetState(MDMA_HandleTypeDef *hmdma); +uint32_t HAL_MDMA_GetError(MDMA_HandleTypeDef *hmdma); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup MDMA_Private_Types MDMA Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup MDMA_Private_Defines MDMA Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup MDMA_Private_Variables MDMA Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup MDMA_Private_Constants MDMA Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup MDMA_Private_Macros MDMA Private Macros + * @{ + */ + +#define IS_MDMA_LEVEL_COMPLETE(__LEVEL__) (((__LEVEL__) == HAL_MDMA_FULL_TRANSFER ) || \ + ((__LEVEL__) == HAL_MDMA_BUFFER_TRANSFER )|| \ + ((__LEVEL__) == HAL_MDMA_BLOCK_TRANSFER ) || \ + ((__LEVEL__) == HAL_MDMA_REPEAT_BLOCK_TRANSFER )) + + +#define IS_MDMA_PRIORITY(__PRIORITY__) (((__PRIORITY__) == MDMA_PRIORITY_LOW ) || \ + ((__PRIORITY__) == MDMA_PRIORITY_MEDIUM) || \ + ((__PRIORITY__) == MDMA_PRIORITY_HIGH) || \ + ((__PRIORITY__) == MDMA_PRIORITY_VERY_HIGH)) + +#define IS_MDMA_ENDIANNESS_MODE(__ENDIANNESS__) (((__ENDIANNESS__) == MDMA_LITTLE_ENDIANNESS_PRESERVE ) || \ + ((__ENDIANNESS__) == MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE) || \ + ((__ENDIANNESS__) == MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE) || \ + ((__ENDIANNESS__) == MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE)) + + +#if defined (OCTOSPI2) +#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_OCTOSPI2_TC)) +#else +#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_SDMMC1_COMMAND_END)) +#endif /* OCTOSPI2 */ + +#define IS_MDMA_SOURCE_INC(__INC__) (((__INC__) == MDMA_SRC_INC_DISABLE ) || \ + ((__INC__) == MDMA_SRC_INC_BYTE ) || \ + ((__INC__) == MDMA_SRC_INC_HALFWORD ) || \ + ((__INC__) == MDMA_SRC_INC_WORD ) || \ + ((__INC__) == MDMA_SRC_INC_DOUBLEWORD) || \ + ((__INC__) == MDMA_SRC_DEC_BYTE) || \ + ((__INC__) == MDMA_SRC_DEC_HALFWORD) || \ + ((__INC__) == MDMA_SRC_DEC_WORD) || \ + ((__INC__) == MDMA_SRC_DEC_DOUBLEWORD)) + +#define IS_MDMA_DESTINATION_INC(__INC__) (((__INC__) == MDMA_DEST_INC_DISABLE ) || \ + ((__INC__) == MDMA_DEST_INC_BYTE ) || \ + ((__INC__) == MDMA_DEST_INC_HALFWORD ) || \ + ((__INC__) == MDMA_DEST_INC_WORD ) || \ + ((__INC__) == MDMA_DEST_INC_DOUBLEWORD) || \ + ((__INC__) == MDMA_DEST_DEC_BYTE) || \ + ((__INC__) == MDMA_DEST_DEC_HALFWORD) || \ + ((__INC__) == MDMA_DEST_DEC_WORD) || \ + ((__INC__) == MDMA_DEST_DEC_DOUBLEWORD)) + +#define IS_MDMA_SOURCE_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_SRC_DATASIZE_BYTE ) || \ + ((__SIZE__) == MDMA_SRC_DATASIZE_HALFWORD ) || \ + ((__SIZE__) == MDMA_SRC_DATASIZE_WORD ) || \ + ((__SIZE__) == MDMA_SRC_DATASIZE_DOUBLEWORD)) + +#define IS_MDMA_DESTINATION_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_DEST_DATASIZE_BYTE ) || \ + ((__SIZE__) == MDMA_DEST_DATASIZE_HALFWORD ) || \ + ((__SIZE__) == MDMA_DEST_DATASIZE_WORD ) || \ + ((__SIZE__) == MDMA_DEST_DATASIZE_DOUBLEWORD)) + +#define IS_MDMA_DATA_ALIGNMENT(__ALIGNMENT__) (((__ALIGNMENT__) == MDMA_DATAALIGN_PACKENABLE ) || \ + ((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT ) || \ + ((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT_SIGNED ) || \ + ((__ALIGNMENT__) == MDMA_DATAALIGN_LEFT)) + + +#define IS_MDMA_SOURCE_BURST(__BURST__) (((__BURST__) == MDMA_SOURCE_BURST_SINGLE ) || \ + ((__BURST__) == MDMA_SOURCE_BURST_2BEATS ) || \ + ((__BURST__) == MDMA_SOURCE_BURST_4BEATS ) || \ + ((__BURST__) == MDMA_SOURCE_BURST_8BEATS) || \ + ((__BURST__) == MDMA_SOURCE_BURST_16BEATS) || \ + ((__BURST__) == MDMA_SOURCE_BURST_32BEATS) || \ + ((__BURST__) == MDMA_SOURCE_BURST_64BEATS) || \ + ((__BURST__) == MDMA_SOURCE_BURST_128BEATS)) + + +#define IS_MDMA_DESTINATION_BURST(__BURST__) (((__BURST__) == MDMA_DEST_BURST_SINGLE ) || \ + ((__BURST__) == MDMA_DEST_BURST_2BEATS ) || \ + ((__BURST__) == MDMA_DEST_BURST_4BEATS ) || \ + ((__BURST__) == MDMA_DEST_BURST_8BEATS) || \ + ((__BURST__) == MDMA_DEST_BURST_16BEATS) || \ + ((__BURST__) == MDMA_DEST_BURST_32BEATS) || \ + ((__BURST__) == MDMA_DEST_BURST_64BEATS) || \ + ((__BURST__) == MDMA_DEST_BURST_128BEATS)) + + #define IS_MDMA_TRANSFER_TRIGGER_MODE(__MODE__) (((__MODE__) == MDMA_BUFFER_TRANSFER ) || \ + ((__MODE__) == MDMA_BLOCK_TRANSFER ) || \ + ((__MODE__) == MDMA_REPEAT_BLOCK_TRANSFER ) || \ + ((__MODE__) == MDMA_FULL_TRANSFER)) + +#define IS_MDMA_BUFFER_TRANSFER_LENGTH(__LENGTH__) (((__LENGTH__) >= 0x00000001U) && ((__LENGTH__) < 0x000000FFU)) + +#define IS_MDMA_BLOCK_COUNT(__COUNT__) (((__COUNT__) > 0U ) && ((__COUNT__) <= 4096U)) + +#define IS_MDMA_TRANSFER_LENGTH(SIZE) (((SIZE) > 0U) && ((SIZE) <= 65536U)) + +#define IS_MDMA_BLOCK_ADDR_OFFSET(__BLOCK_ADD_OFFSET__) (((__BLOCK_ADD_OFFSET__) > (-65536)) && ((__BLOCK_ADD_OFFSET__) < 65536)) + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup MDMA_Private_Functions_Prototypes MDMA Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MDMA_Private_Functions MDMA Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_MDMA_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_nor.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_nor.h new file mode 100644 index 0000000..de0494b --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_nor.h @@ -0,0 +1,324 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_nor.h + * @author MCD Application Team + * @brief Header file of NOR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_NOR_H +#define STM32H7xx_HAL_NOR_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_ll_fmc.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup NOR + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ +/** @defgroup NOR_Exported_Types NOR Exported Types + * @{ + */ + +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_NOR_STATE_RESET = 0x00U, /*!< NOR not yet initialized or disabled */ + HAL_NOR_STATE_READY = 0x01U, /*!< NOR initialized and ready for use */ + HAL_NOR_STATE_BUSY = 0x02U, /*!< NOR internal processing is ongoing */ + HAL_NOR_STATE_ERROR = 0x03U, /*!< NOR error state */ + HAL_NOR_STATE_PROTECTED = 0x04U /*!< NOR NORSRAM device write protected */ +} HAL_NOR_StateTypeDef; + +/** + * @brief FMC NOR Status typedef + */ +typedef enum +{ + HAL_NOR_STATUS_SUCCESS = 0U, + HAL_NOR_STATUS_ONGOING, + HAL_NOR_STATUS_ERROR, + HAL_NOR_STATUS_TIMEOUT +} HAL_NOR_StatusTypeDef; + +/** + * @brief FMC NOR ID typedef + */ +typedef struct +{ + uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */ + + uint16_t Device_Code1; + + uint16_t Device_Code2; + + uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory. + These codes can be accessed by performing read operations with specific + control signals and addresses set.They can also be accessed by issuing + an Auto Select command */ +} NOR_IDTypeDef; + +/** + * @brief FMC NOR CFI typedef + */ +typedef struct +{ + /*!< Defines the information stored in the memory's Common flash interface + which contains a description of various electrical and timing parameters, + density information and functions supported by the memory */ + + uint16_t CFI_1; + + uint16_t CFI_2; + + uint16_t CFI_3; + + uint16_t CFI_4; +} NOR_CFITypeDef; + +/** + * @brief NOR handle Structure definition + */ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +typedef struct __NOR_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ + +{ + FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< NOR locking object */ + + __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */ + + uint32_t CommandSet; /*!< NOR algorithm command set and control */ + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp Init callback */ + void (* MspDeInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp DeInit callback */ +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +} NOR_HandleTypeDef; + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/** + * @brief HAL NOR Callback ID enumeration definition + */ +typedef enum +{ + HAL_NOR_MSP_INIT_CB_ID = 0x00U, /*!< NOR MspInit Callback ID */ + HAL_NOR_MSP_DEINIT_CB_ID = 0x01U /*!< NOR MspDeInit Callback ID */ +} HAL_NOR_CallbackIDTypeDef; + +/** + * @brief HAL NOR Callback pointer definition + */ +typedef void (*pNOR_CallbackTypeDef)(NOR_HandleTypeDef *hnor); +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup NOR_Exported_Macros NOR Exported Macros + * @{ + */ +/** @brief Reset NOR handle state + * @param __HANDLE__ specifies the NOR handle. + * @retval None + */ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_NOR_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET) +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @addtogroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor); +void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group2 Input and Output functions + * @{ + */ + +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID); +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); + +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize); +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize); + +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address); +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI); + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/* NOR callback registering/unregistering */ +HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId, + pNOR_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId); +#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group3 NOR Control functions + * @{ + */ + +/* NOR Control functions *****************************************************/ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor); +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor); +/** + * @} + */ + +/** @addtogroup NOR_Exported_Functions_Group4 NOR State functions + * @{ + */ + +/* NOR State functions ********************************************************/ +HAL_NOR_StateTypeDef HAL_NOR_GetState(const NOR_HandleTypeDef *hnor); +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup NOR_Private_Constants NOR Private Constants + * @{ + */ +/* NOR device IDs addresses */ +#define MC_ADDRESS ((uint16_t)0x0000) +#define DEVICE_CODE1_ADDR ((uint16_t)0x0001) +#define DEVICE_CODE2_ADDR ((uint16_t)0x000E) +#define DEVICE_CODE3_ADDR ((uint16_t)0x000F) + +/* NOR CFI IDs addresses */ +#define CFI1_ADDRESS ((uint16_t)0x0061) +#define CFI2_ADDRESS ((uint16_t)0x0062) +#define CFI3_ADDRESS ((uint16_t)0x0063) +#define CFI4_ADDRESS ((uint16_t)0x0064) + +/* NOR operation wait timeout */ +#define NOR_TMEOUT ((uint16_t)0xFFFF) + +/* NOR memory data width */ +#define NOR_MEMORY_8B ((uint8_t)0x00) +#define NOR_MEMORY_16B ((uint8_t)0x01) + +/* NOR memory device read/write start address */ +#define NOR_MEMORY_ADRESS1 (0x60000000U) +#define NOR_MEMORY_ADRESS2 (0x64000000U) +#define NOR_MEMORY_ADRESS3 (0x68000000U) +#define NOR_MEMORY_ADRESS4 (0x6C000000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup NOR_Private_Macros NOR Private Macros + * @{ + */ +/** + * @brief NOR memory address shifting. + * @param __NOR_ADDRESS NOR base address + * @param __NOR_MEMORY_WIDTH_ NOR memory width + * @param __ADDRESS__ NOR memory address + * @retval NOR shifted address value + */ +#define NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) \ + ((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_16B)? \ + ((uint32_t)((__NOR_ADDRESS) + (2U * (__ADDRESS__)))): \ + ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__))))) + +/** + * @brief NOR memory write data to specified address. + * @param __ADDRESS__ NOR memory address + * @param __DATA__ Data to write + * @retval None + */ +#define NOR_WRITE(__ADDRESS__, __DATA__) do{ \ + (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__)); \ + __DSB(); \ + } while(0) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_NOR_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd.h new file mode 100644 index 0000000..f1fe87f --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd.h @@ -0,0 +1,444 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pcd.h + * @author MCD Application Team + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_PCD_H +#define STM32H7xx_HAL_PCD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_ll_usb.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +/* Device LPM suspend state */ +typedef enum +{ + LPM_L0 = 0x00, /* on */ + LPM_L1 = 0x01, /* LPM L1 sleep */ + LPM_L2 = 0x02, /* suspend */ + LPM_L3 = 0x03, /* off */ +} PCD_LPM_StateTypeDef; + +typedef enum +{ + PCD_LPM_L0_ACTIVE = 0x00, /* on */ + PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ +} PCD_LPM_MsgTypeDef; + +typedef enum +{ + PCD_BCD_ERROR = 0xFF, + PCD_BCD_CONTACT_DETECTION = 0xFE, + PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD, + PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC, + PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB, + PCD_BCD_DISCOVERY_COMPLETED = 0x00, + +} PCD_BCD_MsgTypeDef; + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +typedef USB_OTG_GlobalTypeDef PCD_TypeDef; +typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; +typedef USB_OTG_EPTypeDef PCD_EPTypeDef; +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @brief PCD Handle Structure definition + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +typedef struct __PCD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address */ + PCD_EPTypeDef IN_ep[16]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[16]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + __IO uint32_t ErrorCode; /*!< PCD Error code */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ + uint32_t BESL; + uint32_t FrameNumber; /*!< Store Current Frame number */ + + + uint32_t lpm_active; /*!< Enable or disable the Link Power Management . + This parameter can be set to ENABLE or DISABLE */ + + uint32_t battery_charging_active; /*!< Enable or disable Battery charging. + This parameter can be set to ENABLE or DISABLE */ + void *pData; /*!< Pointer to upper stack Handler */ + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */ + void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */ + void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */ + void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */ + void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */ + void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */ + void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */ + + void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */ + void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */ + void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */ + void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */ + void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */ + void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */ + + void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */ + void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extended module */ +#include "stm32h7xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_HIGH USBD_HS_SPEED +#define PCD_SPEED_HIGH_IN_FULL USBD_HSINFS_SPEED +#define PCD_SPEED_FULL USBD_FS_SPEED +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_ULPI 1U +#define PCD_PHY_EMBEDDED 2U +#define PCD_PHY_UTMI 3U +/** + * @} + */ + +/** @defgroup PCD_Error_Code_definition PCD Error Code definition + * @brief PCD Error Code definition + * @{ + */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */ +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \ + ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__)) +#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U) + +#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \ + *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK) + +#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \ + *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK + +#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \ + ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U) + +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI_D1->IMR2 |= (USB_OTG_HS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI_D1->IMR2 &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI_D1->IMR2 |= (USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI_D1->IMR2 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition + * @brief HAL USB OTG PCD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */ + HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */ + HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */ + HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */ + HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */ + HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */ + HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */ + + HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */ + HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */ + +} HAL_PCD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition + * @brief HAL USB OTG PCD Callback pointer definition + * @{ + */ + +typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */ +typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */ +typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */ +typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */ +typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */ +typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */ +typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */ + +/** + * @} + */ + +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback); + +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd); + +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef HAL_PCD_SetTestMode(const PCD_HandleTypeDef *hpcd, uint8_t testmode); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef const *hpcd, uint8_t ep_addr); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef const *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define USB_OTG_FS_WAKEUP_EXTI_LINE (0x1U << 12) /*!< USB FS EXTI Line WakeUp Interrupt */ +#define USB_OTG_HS_WAKEUP_EXTI_LINE (0x1U << 11) /*!< USB HS EXTI Line WakeUp Interrupt */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ +/** + * @} + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#ifndef USB_OTG_DOEPINT_OTEPSPR +#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */ +#endif /* defined USB_OTG_DOEPINT_OTEPSPR */ + +#ifndef USB_OTG_DOEPMSK_OTEPSPRM +#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */ + +#ifndef USB_OTG_DOEPINT_NAK +#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */ +#endif /* defined USB_OTG_DOEPINT_NAK */ + +#ifndef USB_OTG_DOEPMSK_NAKM +#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_NAKM */ + +#ifndef USB_OTG_DOEPINT_STPKTRX +#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */ +#endif /* defined USB_OTG_DOEPINT_STPKTRX */ + +#ifndef USB_OTG_DOEPMSK_NYETM +#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */ +#endif /* defined USB_OTG_DOEPMSK_NYETM */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_PCD_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd_ex.h new file mode 100644 index 0000000..9cfa012 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd_ex.h @@ -0,0 +1,88 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pcd_ex.h + * @author MCD Application Team + * @brief Header file of PCD HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_PCD_EX_H +#define STM32H7xx_HAL_PCD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); + + +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd); +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd); + +void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); +void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32H7xx_HAL_PCD_EX_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h new file mode 100644 index 0000000..91a9054 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h @@ -0,0 +1,809 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_PWR_H +#define STM32H7xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. This + parameter can be a value of @ref + PWR_PVD_detection_level. + */ + + uint32_t Mode; /*!< Mode: Specifies the EXTI operating mode for the PVD + event. This parameter can be a value of @ref + PWR_PVD_Mode. + */ +}PWR_PVDTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_PVD_detection_level PWR PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 /*!< Programmable voltage detector + level 0 selection : 1V95 */ +#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 /*!< Programmable voltage detector + level 1 selection : 2V1 */ +#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 /*!< Programmable voltage detector + level 2 selection : 2V25 */ +#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 /*!< Programmable voltage detector + level 3 selection : 2V4 */ +#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 /*!< Programmable voltage detector + level 4 selection : 2V55 */ +#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 /*!< Programmable voltage detector + level 5 selection : 2V7 */ +#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 /*!< Programmable voltage detector + level 6 selection : 2V85 */ +#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7 /*!< External input analog voltage + (Compare internally to VREF) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0U) +#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI (0x01U) +#define PWR_SLEEPENTRY_WFE (0x02U) +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI (0x01U) +#define PWR_STOPENTRY_WFE (0x02U) +/** + * @} + */ + +/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale + * @{ + */ +#if defined(PWR_SRDCR_VOS) +#define PWR_REGULATOR_VOLTAGE_SCALE0 (PWR_SRDCR_VOS_1 | PWR_SRDCR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_SRDCR_VOS_1) +#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_SRDCR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE3 (0U) +#else +#define PWR_REGULATOR_VOLTAGE_SCALE0 (0U) +#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_D3CR_VOS_1 | PWR_D3CR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_D3CR_VOS_1) +#define PWR_REGULATOR_VOLTAGE_SCALE3 (PWR_D3CR_VOS_0) +#endif /* PWR_SRDCR_VOS */ +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Flag + * @{ + */ +/* PWR CPU flag */ +#define PWR_FLAG_STOP (0x01U) +#if defined (PWR_CPUCR_SBF_D2) +#define PWR_FLAG_SB_D1 (0x02U) +#define PWR_FLAG_SB_D2 (0x03U) +#endif /* defined (PWR_CPUCR_SBF_D2) */ +#define PWR_FLAG_SB (0x04U) +#if defined (DUAL_CORE) +#define PWR_FLAG_CPU_HOLD (0x05U) +#define PWR_FLAG_CPU2_HOLD (0x06U) +#define PWR_FLAG2_STOP (0x07U) +#define PWR_FLAG2_SB_D1 (0x08U) +#define PWR_FLAG2_SB_D2 (0x09U) +#define PWR_FLAG2_SB (0x0AU) +#endif /* defined (DUAL_CORE) */ +#define PWR_FLAG_PVDO (0x0BU) +#define PWR_FLAG_AVDO (0x0CU) +#define PWR_FLAG_ACTVOSRDY (0x0DU) +#define PWR_FLAG_ACTVOS (0x0EU) +#define PWR_FLAG_BRR (0x0FU) +#define PWR_FLAG_VOSRDY (0x10U) +#if defined (SMPS) +#define PWR_FLAG_SMPSEXTRDY (0x11U) +#else +#define PWR_FLAG_SCUEN (0x11U) +#endif /* defined (SMPS) */ +#if defined (PWR_CSR1_MMCVDO) +#define PWR_FLAG_MMCVDO (0x12U) +#endif /* defined (PWR_CSR1_MMCVDO) */ +#define PWR_FLAG_USB33RDY (0x13U) +#define PWR_FLAG_TEMPH (0x14U) +#define PWR_FLAG_TEMPL (0x15U) +#define PWR_FLAG_VBATH (0x16U) +#define PWR_FLAG_VBATL (0x17U) + +/* PWR Wake up flag */ +#define PWR_FLAG_WKUP1 PWR_WKUPCR_WKUPC1 +#define PWR_FLAG_WKUP2 PWR_WKUPCR_WKUPC2 +#define PWR_FLAG_WKUP3 PWR_WKUPCR_WKUPC3 +#define PWR_FLAG_WKUP4 PWR_WKUPCR_WKUPC4 +#define PWR_FLAG_WKUP5 PWR_WKUPCR_WKUPC5 +#define PWR_FLAG_WKUP6 PWR_WKUPCR_WKUPC6 +/** + * @} + */ + +/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask + * @{ + */ +#define PWR_EWUP_MASK (0x0FFF3F3FU) +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macro PWR Exported Macro + * @{ + */ + +/** @brief Configure the main internal regulator output voltage. + * @param __REGULATOR__ : Specifies the regulator output voltage to achieve a + * trade-off between performance and power consumption + * when the device does not operate at the maximum + * frequency (refer to the datasheet for more details). + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output + * Scale 0 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output + * Scale 1 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output + * Scale 2 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output + * Scale 3 mode. + * @note For STM32H74x and STM32H75x lines, configuring Voltage Scale 0 is + * only possible when Vcore is supplied from LDO (Low DropOut). The + * SYSCFG Clock must be enabled through __HAL_RCC_SYSCFG_CLK_ENABLE() + * macro before configuring Voltage Scale 0 using + * __HAL_PWR_VOLTAGESCALING_CONFIG(). + * Transition to Voltage Scale 0 is only possible when the system is + * already in Voltage Scale 1. + * Transition from Voltage Scale 0 is only possible to Voltage Scale 1 + * then once in Voltage Scale 1 it is possible to switch to another + * voltage scale. + * After each regulator voltage setting, wait on VOSRDY flag to be set + * using macro __HAL_PWR_GET_FLAG(). + * To enter low power mode , and if current regulator voltage is + * Voltage Scale 0 then first switch to Voltage Scale 1 before entering + * low power mode. + * @retval None. + */ +#if defined (PWR_SRDCR_VOS) /* STM32H7Axxx and STM32H7Bxxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Configure the Voltage Scaling */ \ + MODIFY_REG(PWR->SRDCR, PWR_SRDCR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->SRDCR, PWR_SRDCR_VOS); \ + UNUSED(tmpreg); \ +} while(0) +#else /* 3 power domains devices */ +#if defined(SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Check the voltage scaling to be configured */ \ + if((__REGULATOR__) == PWR_REGULATOR_VOLTAGE_SCALE0) \ + { \ + /* Configure the Voltage Scaling 1 */ \ + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + /* Enable the PWR overdrive */ \ + SET_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Delay after setting the syscfg boost setting */ \ + tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + } \ + else \ + { \ + /* Disable the PWR overdrive */ \ + CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Delay after setting the syscfg boost setting */ \ + tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Configure the Voltage Scaling x */ \ + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + } \ + UNUSED(tmpreg); \ +} while(0) +#else /* STM32H72xxx and STM32H73xxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Configure the Voltage Scaling */ \ + MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + UNUSED(tmpreg); \ +} while(0) +#endif /* defined(SYSCFG_PWRCR_ODEN) */ +#endif /* defined (PWR_SRDCR_VOS) */ + +/** @brief Check PWR flags are set or not. + * @param __FLAG__ : Specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_PVDO : PVD Output. This flag is valid only if PVD + * is enabled by the HAL_PWR_EnablePVD() + * function. + * The PVD is stopped by STANDBY mode. For this + * reason, this bit is equal to 0 after STANDBY + * or reset until the PVDE bit is set. + * @arg PWR_FLAG_AVDO : AVD Output. This flag is valid only if AVD + * is enabled by the HAL_PWREx_EnableAVD() + * function. The AVD is stopped by STANDBY mode. + * For this reason, this bit is equal to 0 + * after STANDBY or reset until the AVDE bit + * is set. + * @arg PWR_FLAG_ACTVOSRDY : This flag indicates that the Regulator + * voltage scaling output selection is + * ready. + * @arg PWR_FLAG_BRR : Backup regulator ready flag. This bit is not + * reset when the device wakes up from STANDBY + * mode or by a system reset or power-on reset. + * @arg PWR_FLAG_VOSRDY : This flag indicates that the Regulator + * voltage scaling output selection is ready. + * mode or by a system reset or power-on reset. + * @arg PWR_FLAG_USB33RDY : This flag indicates that the USB supply + * from regulator is ready. + * @arg PWR_FLAG_TEMPH : This flag indicates that the temperature + * equal or above high threshold level. + * @arg PWR_FLAG_TEMPL : This flag indicates that the temperature + * equal or below low threshold level. + * @arg PWR_FLAG_VBATH : This flag indicates that VBAT level equal + * or above high threshold level. + * @arg PWR_FLAG_VBATL : This flag indicates that VBAT level equal + * or below low threshold level. + * @arg PWR_FLAG_STOP : This flag indicates that the system entered + * in STOP mode. + * @arg PWR_FLAG_SB : This flag indicates that the system entered in + * STANDBY mode. + * @arg PWR_FLAG_SB_D1 : This flag indicates that the D1 domain + * entered in STANDBY mode. + * @arg PWR_FLAG_SB_D2 : This flag indicates that the D2 domain + * entered in STANDBY mode. + * @arg PWR_FLAG2_STOP : This flag indicates that the system entered + * in STOP mode. + * @arg PWR_FLAG2_SB : This flag indicates that the system entered + * in STANDBY mode. + * @arg PWR_FLAG2_SB_D1 : This flag indicates that the D1 domain + * entered in STANDBY mode. + * @arg PWR_FLAG2_SB_D2 : This flag indicates that the D2 domain + * entered in STANDBY mode. + * @arg PWR_FLAG_CPU_HOLD : This flag indicates that the CPU1 wakes + * up with hold. + * @arg PWR_FLAG_CPU2_HOLD : This flag indicates that the CPU2 wakes + * up with hold. + * @arg PWR_FLAG_SMPSEXTRDY : This flag indicates that the SMPS + * External supply is sready. + * @arg PWR_FLAG_SCUEN : This flag indicates that the supply + * configuration update is enabled. + * @arg PWR_FLAG_MMCVDO : This flag indicates that the VDDMMC is + * above or equal to 1.2 V. + * @note The PWR_FLAG_PVDO, PWR_FLAG_AVDO, PWR_FLAG_ACTVOSRDY, PWR_FLAG_BRR, + * PWR_FLAG_VOSRDY, PWR_FLAG_USB33RDY, PWR_FLAG_TEMPH, PWR_FLAG_TEMPL, + * PWR_FLAG_VBATH, PWR_FLAG_VBATL, PWR_FLAG_STOP and PWR_FLAG_SB flags + * are used for all H7 family lines. + * The PWR_FLAG2_STOP, PWR_FLAG2_SB, PWR_FLAG2_SB_D1, PWR_FLAG2_SB_D2, + * PWR_FLAG_CPU_HOLD and PWR_FLAG_CPU2_HOLD flags are used only for H7 + * dual core lines. + * The PWR_FLAG_SB_D1 and PWR_FLAG_SB_D2 flags are used for all H7 + * family except STM32H7Axxx and STM32H7Bxxx lines. + * The PWR_FLAG_MMCVDO flag is used only for STM32H7Axxx and + * STM32H7Bxxx lines. + * The PWR_FLAG_SCUEN flag is used for devices that support only LDO + * regulator. + * The PWR_FLAG_SMPSEXTRDY flag is used for devices that support LDO + * and SMPS regulators. + * @retval The (__FLAG__) state (TRUE or FALSE). + */ +#if defined (DUAL_CORE) /* Dual core lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_CPU_HOLD) ? ((PWR->CPU2CR & PWR_CPU2CR_HOLD1F) == PWR_CPU2CR_HOLD1F) :\ + ((__FLAG__) == PWR_FLAG_CPU2_HOLD) ? ((PWR->CPUCR & PWR_CPUCR_HOLD2F) == PWR_CPUCR_HOLD2F) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG2_SB) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF) == PWR_CPU2CR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG2_STOP) ? ((PWR->CPU2CR & PWR_CPU2CR_STOPF) == PWR_CPU2CR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG2_SB_D1) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D1) == PWR_CPU2CR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG2_SB_D2) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D2) == PWR_CPU2CR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* Single core lines */ +#if defined (PWR_CPUCR_SBF_D2) /* STM32H72x, STM32H73x, STM32H74x and STM32H75x lines */ +#if defined (SMPS) /* STM32H725 and STM32H735 lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_FLAG_SMPSEXTRDY) == PWR_FLAG_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* STM32H723, STM32H733, STM32H742, STM32H743, STM32H750 and STM32H753 lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#endif /* defined (SMPS) */ +#else /* STM32H7Axxx and STM32H7Bxxx lines */ +#if defined (SMPS) /* STM32H7AxxQ and STM32H7BxxQ lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* STM32H7Axx and STM32H7Bxx lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#endif /* SMPS */ +#endif /* PWR_CPUCR_SBF_D2 */ +#endif /* DUAL_CORE */ + +/** @brief Check PWR wake up flags are set or not. + * @param __FLAG__: specifies the wake up flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag. + * @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag. + * @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag. + * @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag. + * @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag. + * @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag. + * @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices + * that support GPIOI port. + * @retval The (__FLAG__) state (TRUE or FALSE). + */ +#define __HAL_PWR_GET_WAKEUPFLAG(__FLAG__) ((PWR->WKUPFR & (__FLAG__)) ? 0 : 1) + +#if defined (DUAL_CORE) +/** @brief Clear CPU PWR flags. + * @param __FLAG__ : Specifies the flag to clear. + * @note This parameter is not used for the STM32H7 family and is kept as + * parameter just to maintain compatibility with other families. + * @note This macro clear all CPU flags STOPF, SBF, SBF_D1, and SBF_D2. + * This parameter can be one of the following values : + * @arg PWR_CPU_FLAGS : Clear HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2 + * CPU flags. + * @retval None. + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) \ +do { \ + SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF); \ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_CSSF); \ +} while(0) +#else +/** @brief Clear CPU PWR flags. + * @param __FLAG__ : Specifies the flag to clear. + * @note This parameter is not used for the STM32H7 family and is kept as + * parameter just to maintain compatibility with other families. + * @note This macro clear all CPU flags. + * For single core devices except STM32H7Axxx and STM32H7Bxxx, CPU + * flags are STOPF, SBF, SBF_D1 and SBF_D2. + * For STM32H7Axxx and STM32H7Bxxx lines, CPU flags are STOPF and SBF. + * @retval None. + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF) +#endif /* defined (DUAL_CORE) */ + +/** @brief Clear PWR wake up flags. + * @param __FLAG__ : Specifies the wake up flag to be cleared. + * This parameter can be one of the following values : + * @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag. + * @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag. + * @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag. + * @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag. + * @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag. + * @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag. + * @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices + * that support GPIOI port. + * @retval None. + */ +#define __HAL_PWR_CLEAR_WAKEUPFLAG(__FLAG__) SET_BIT(PWR->WKUPCR, (__FLAG__)) + +/** + * @brief Enable the PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable the PVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable the PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable the PVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable event on PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable event on PVD EXTI D2 Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable event on PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable event on PVD EXTI D2 Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable the PVD Rising Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Rising Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Rising & Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Disable the PVD Rising & Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL) + +#if defined (DUAL_CORE) +/** + * @brief Checks whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI D2 PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Clear the PVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Clear the PVD EXTI D2 flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Generates a Software interrupt on PVD EXTI line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) +/** + * @} + */ + +/* Include PWR HAL Extension module */ +#include "stm32h7xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_PWR_DeInit (void); +void HAL_PWR_EnableBkUpAccess (void); +void HAL_PWR_DisableBkUpAccess (void); +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control Functions + * @{ + */ +/* Peripheral Control functions **********************************************/ +/* PVD configuration */ +void HAL_PWR_ConfigPVD (PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD (void); +void HAL_PWR_DisablePVD (void); + +/* WakeUp pins configuration */ +void HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx); + +/* Low Power modes entry */ +void HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode (void); + +/* Power PVD IRQ Handler */ +void HAL_PWR_PVD_IRQHandler (void); +void HAL_PWR_PVDCallback (void); + +/* Cortex System Control functions *******************************************/ +void HAL_PWR_EnableSleepOnExit (void); +void HAL_PWR_DisableSleepOnExit (void); +void HAL_PWR_EnableSEVOnPend (void); +void HAL_PWR_DisableSEVOnPend (void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWR_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line + * @{ + */ +#define PWR_EXTI_LINE_PVD EXTI_IMR1_IM16 /*!< External interrupt line 16 + Connected to the PVD EXTI Line */ +/** + * @} + */ + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters + * @{ + */ +/* Check PVD level parameter */ +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) ||\ + ((LEVEL) == PWR_PVDLEVEL_1) ||\ + ((LEVEL) == PWR_PVDLEVEL_2) ||\ + ((LEVEL) == PWR_PVDLEVEL_3) ||\ + ((LEVEL) == PWR_PVDLEVEL_4) ||\ + ((LEVEL) == PWR_PVDLEVEL_5) ||\ + ((LEVEL) == PWR_PVDLEVEL_6) ||\ + ((LEVEL) == PWR_PVDLEVEL_7)) + +/* Check PVD mode parameter */ +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_NORMAL)) + +/* Check low power regulator parameter */ +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) ||\ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +/* Check low power mode entry parameter */ +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) ||\ + ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +/* Check low power mode entry parameter */ +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) ||\ + ((ENTRY) == PWR_STOPENTRY_WFE)) + +/* Check voltage scale level parameter */ +#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE0) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32H7xx_HAL_PWR_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h new file mode 100644 index 0000000..61c7609 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h @@ -0,0 +1,789 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_PWR_EX_H +#define STM32H7xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Types PWREx Exported Types + * @{ + */ +/** + * @brief PWREx AVD configuration structure definition + */ +typedef struct +{ + uint32_t AVDLevel; /*!< AVDLevel : Specifies the AVD detection level. This + parameter can be a value of @ref + PWREx_AVD_detection_level + */ + + uint32_t Mode; /*!< Mode : Specifies the EXTI operating mode for the AVD + event. This parameter can be a value of @ref + PWREx_AVD_Mode. + */ +}PWREx_AVDTypeDef; + +/** + * @brief PWREx Wakeup pin configuration structure definition + */ +typedef struct +{ + uint32_t WakeUpPin; /*!< WakeUpPin: Specifies the Wake-Up pin to be enabled. + This parameter can be a value of @ref + PWREx_WakeUp_Pins + */ + + uint32_t PinPolarity; /*!< PinPolarity: Specifies the Wake-Up pin polarity. + This parameter can be a value of @ref + PWREx_PIN_Polarity + */ + + uint32_t PinPull; /*!< PinPull: Specifies the Wake-Up pin pull. This + parameter can be a value of @ref + PWREx_PIN_Pull + */ +}PWREx_WakeupPinTypeDef; + +#if defined (PWR_CSR1_MMCVDO) +/** + * @brief PWR VDDMMC voltage level enum definition + */ +typedef enum +{ + PWR_MMC_VOLTAGE_BELOW_1V2, /*!< VDDMMC is below 1V2 */ + PWR_MMC_VOLTAGE_EQUAL_ABOVE_1V2 /*!< VDDMMC is above or equal 1V2 */ +} PWREx_MMC_VoltageLevel; +#endif /* defined (PWR_CSR1_MMCVDO) */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ +/** @defgroup PWREx_WakeUp_Pins PWREx Wake-Up Pins + * @{ + */ +/* High level and No pull (default configuration) */ +#define PWR_WAKEUP_PIN6 PWR_WKUPEPR_WKUPEN6 +#if defined (PWR_WKUPEPR_WKUPEN5) +#define PWR_WAKEUP_PIN5 PWR_WKUPEPR_WKUPEN5 +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +#define PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4 +#if defined (PWR_WKUPEPR_WKUPEN3) +#define PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3 +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +#define PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2 +#define PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1 + +/* High level and No pull */ +#define PWR_WAKEUP_PIN6_HIGH PWR_WKUPEPR_WKUPEN6 +#if defined (PWR_WKUPEPR_WKUPEN5) +#define PWR_WAKEUP_PIN5_HIGH PWR_WKUPEPR_WKUPEN5 +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +#define PWR_WAKEUP_PIN4_HIGH PWR_WKUPEPR_WKUPEN4 +#if defined (PWR_WKUPEPR_WKUPEN3) +#define PWR_WAKEUP_PIN3_HIGH PWR_WKUPEPR_WKUPEN3 +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_WKUPEPR_WKUPEN2 +#define PWR_WAKEUP_PIN1_HIGH PWR_WKUPEPR_WKUPEN1 + +/* Low level and No pull */ +#define PWR_WAKEUP_PIN6_LOW (PWR_WKUPEPR_WKUPP6 | PWR_WKUPEPR_WKUPEN6) +#if defined (PWR_WKUPEPR_WKUPP5) +#define PWR_WAKEUP_PIN5_LOW (PWR_WKUPEPR_WKUPP5 | PWR_WKUPEPR_WKUPEN5) +#endif /* defined (PWR_WKUPEPR_WKUPP5) */ +#define PWR_WAKEUP_PIN4_LOW (PWR_WKUPEPR_WKUPP4 | PWR_WKUPEPR_WKUPEN4) +#if defined (PWR_WKUPEPR_WKUPP3) +#define PWR_WAKEUP_PIN3_LOW (PWR_WKUPEPR_WKUPP3 | PWR_WKUPEPR_WKUPEN3) +#endif /* defined (PWR_WKUPEPR_WKUPP3) */ +#define PWR_WAKEUP_PIN2_LOW (PWR_WKUPEPR_WKUPP2 | PWR_WKUPEPR_WKUPEN2) +#define PWR_WAKEUP_PIN1_LOW (PWR_WKUPEPR_WKUPP1 | PWR_WKUPEPR_WKUPEN1) +/** + * @} + */ + +/** @defgroup PWREx_PIN_Polarity PWREx Pin Polarity configuration + * @{ + */ +#define PWR_PIN_POLARITY_HIGH (0x00000000U) +#define PWR_PIN_POLARITY_LOW (0x00000001U) +/** + * @} + */ + +/** @defgroup PWREx_PIN_Pull PWREx Pin Pull configuration + * @{ + */ +#define PWR_PIN_NO_PULL (0x00000000U) +#define PWR_PIN_PULL_UP (0x00000001U) +#define PWR_PIN_PULL_DOWN (0x00000002U) +/** + * @} + */ + +/** @defgroup PWREx_Wakeup_Pins_Flags PWREx Wakeup Pins Flags. + * @{ + */ +#define PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */ +#define PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */ +#if defined (PWR_WKUPFR_WKUPF3) +#define PWR_WAKEUP_FLAG3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PI8 */ +#endif /* defined (PWR_WKUPFR_WKUPF3) */ +#define PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC13 */ +#if defined (PWR_WKUPFR_WKUPF5) +#define PWR_WAKEUP_FLAG5 PWR_WKUPFR_WKUPF5 /*!< Wakeup flag on PI11 */ +#endif /* defined (PWR_WKUPFR_WKUPF5) */ +#define PWR_WAKEUP_FLAG6 PWR_WKUPFR_WKUPF6 /*!< Wakeup flag on PC1 */ +#if defined (PWR_WKUPFR_WKUPF3) +#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\ + PWR_WKUPFR_WKUPF3 | PWR_WKUPFR_WKUPF4 |\ + PWR_WKUPFR_WKUPF5 | PWR_WKUPFR_WKUPF6) +#else +#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\ + PWR_WKUPFR_WKUPF4 | PWR_WKUPFR_WKUPF6) +#endif /* defined (PWR_WKUPFR_WKUPF3) */ +/** + * @} + */ + +#if defined (DUAL_CORE) +/** @defgroup PWREx_Core_Select PWREx Core definition + * @{ + */ +#define PWR_CORE_CPU1 (0x00000000U) +#define PWR_CORE_CPU2 (0x00000001U) +/** + * @} + */ +#endif /* defined (DUAL_CORE) */ + +/** @defgroup PWREx_Domains PWREx Domains definition + * @{ + */ +#define PWR_D1_DOMAIN (0x00000000U) +#if defined (PWR_CPUCR_PDDS_D2) +#define PWR_D2_DOMAIN (0x00000001U) +#endif /* defined (PWR_CPUCR_PDDS_D2) */ +#define PWR_D3_DOMAIN (0x00000002U) +/** + * @} + */ + +/** @defgroup PWREx_Domain_Flags PWREx Domain Flags definition + * @{ + */ +#if defined (DUAL_CORE) +#define PWR_D1_DOMAIN_FLAGS (0x00000000U) +#define PWR_D2_DOMAIN_FLAGS (0x00000001U) +#define PWR_ALL_DOMAIN_FLAGS (0x00000002U) +#else +#define PWR_CPU_FLAGS (0x00000000U) +#endif /* defined (DUAL_CORE) */ +/** + * @} + */ + +/** @defgroup PWREx_D3_State PWREx D3 Domain State + * @{ + */ +#define PWR_D3_DOMAIN_STOP (0x00000000U) +#define PWR_D3_DOMAIN_RUN (0x00000800U) + +/** + * @} + */ + +/** @defgroup PWREx_Supply_configuration PWREx Supply configuration + * @{ + */ +#define PWR_LDO_SUPPLY PWR_CR3_LDOEN /*!< Core domains are supplied from the LDO */ +#if defined (SMPS) +#define PWR_DIRECT_SMPS_SUPPLY PWR_CR3_SMPSEN /*!< Core domains are supplied from the SMPS only */ +#define PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */ +#define PWR_SMPS_2V5_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies the LDO which supplies the Core domains */ +#define PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 1.8V output supplies an external source which supplies the Core domains */ +#define PWR_SMPS_2V5_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 2.5V output supplies an external source which supplies the Core domains */ +#endif /* defined (SMPS) */ +#define PWR_EXTERNAL_SOURCE_SUPPLY PWR_CR3_BYPASS /*!< The SMPS disabled and the LDO Bypass. The Core domains are supplied from an external source */ + +#if defined (SMPS) +#define PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SMPSLEVEL | PWR_CR3_SMPSEXTHP | \ + PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS) +#else +#define PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SCUEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS) +#endif /* defined (SMPS) */ +/** + * @} + */ + + +/** @defgroup PWREx_AVD_detection_level PWREx AVD detection level + * @{ + */ +#define PWR_AVDLEVEL_0 PWR_CR1_ALS_LEV0 /*!< Analog voltage detector level 0 + selection : 1V7 */ +#define PWR_AVDLEVEL_1 PWR_CR1_ALS_LEV1 /*!< Analog voltage detector level 1 + selection : 2V1 */ +#define PWR_AVDLEVEL_2 PWR_CR1_ALS_LEV2 /*!< Analog voltage detector level 2 + selection : 2V5 */ +#define PWR_AVDLEVEL_3 PWR_CR1_ALS_LEV3 /*!< Analog voltage detector level 3 + selection : 2V8 */ +/** + * @} + */ + +/** @defgroup PWREx_AVD_Mode PWREx AVD Mode + * @{ + */ +#define PWR_AVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */ +#define PWR_AVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_AVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_AVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_AVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_AVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_AVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale + * @{ + */ +#define PWR_REGULATOR_SVOS_SCALE5 (PWR_CR1_SVOS_0) +#define PWR_REGULATOR_SVOS_SCALE4 (PWR_CR1_SVOS_1) +#define PWR_REGULATOR_SVOS_SCALE3 (PWR_CR1_SVOS_0 | PWR_CR1_SVOS_1) +/** + * @} + */ + +/** @defgroup PWREx_VBAT_Battery_Charging_Resistor PWR battery charging resistor selection + * @{ + */ +#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000U) /*!< VBAT charging through a 5 kOhms resistor */ +#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR3_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */ +/** + * @} + */ + +/** @defgroup PWREx_VBAT_Thresholds PWREx VBAT Thresholds + * @{ + */ +#define PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U) +#define PWR_VBAT_BELOW_LOW_THRESHOLD PWR_CR2_VBATL +#define PWR_VBAT_ABOVE_HIGH_THRESHOLD PWR_CR2_VBATH +/** + * @} + */ + +/** @defgroup PWREx_TEMP_Thresholds PWREx Temperature Thresholds + * @{ + */ +#define PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U) +#define PWR_TEMP_BELOW_LOW_THRESHOLD PWR_CR2_TEMPL +#define PWR_TEMP_ABOVE_HIGH_THRESHOLD PWR_CR2_TEMPH +/** + * @} + */ +/** @defgroup PWREx_AVD_EXTI_Line PWREx AVD EXTI Line 16 + * @{ + */ +#define PWR_EXTI_LINE_AVD EXTI_IMR1_IM16 /*!< External interrupt line 16 + Connected to the AVD EXTI Line */ +/** + * @} + */ + +#if defined (PWR_CR1_SRDRAMSO) +/** @defgroup PWREx_Memory_Shut_Off Memory shut-off block selection + * @{ + */ +#define PWR_SRD_AHB_MEMORY_BLOCK PWR_CR1_SRDRAMSO /*!< SmartRun domain AHB memory shut-off in DStop/DStop2 low-power mode */ +#define PWR_USB_FDCAN_MEMORY_BLOCK PWR_CR1_HSITFSO /*!< High-speed interfaces USB and FDCAN memories shut-off in DStop/DStop2 mode */ +#define PWR_GFXMMU_JPEG_MEMORY_BLOCK PWR_CR1_GFXSO /*!< GFXMMU and JPEG memories shut-off in DStop/DStop2 mode */ +#define PWR_TCM_ECM_MEMORY_BLOCK PWR_CR1_ITCMSO /*!< Instruction TCM and ETM memories shut-off in DStop/DStop2 mode */ +#define PWR_RAM1_AHB_MEMORY_BLOCK PWR_CR1_AHBRAM1SO /*!< AHB RAM1 shut-off in DStop/DStop2 mode */ +#define PWR_RAM2_AHB_MEMORY_BLOCK PWR_CR1_AHBRAM2SO /*!< AHB RAM2 shut-off in DStop/DStop2 mode */ +#define PWR_RAM1_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM1SO /*!< AXI RAM1 shut-off in DStop/DStop2 mode */ +#define PWR_RAM2_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM2SO /*!< AXI RAM2 shut-off in DStop/DStop2 mode */ +#define PWR_RAM3_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM3SO /*!< AXI RAM3 shut-off in DStop/DStop2 mode */ +#define PWR_MEMORY_BLOCK_KEEP_ON 0U /*!< Memory content is kept in DStop or DStop2 mode */ +#define PWR_MEMORY_BLOCK_SHUT_OFF 1U /*!< Memory content is lost in DStop or DStop2 mode */ +/** + * @} + */ +#endif /* defined (PWR_CR1_SRDRAMSO) */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Macro PWREx Exported Macro + * @{ + */ + +/** + * @brief Enable the AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable the AVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable the AVD EXTI Line 16 + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable the AVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable event on AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable event on AVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable event on AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable event on AVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable the AVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Disable the AVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Enable the AVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Disable the AVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Enable the AVD Extended Interrupt Rising and Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Disable the AVD Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Check whether the specified AVD EXTI interrupt flag is set or not. + * @retval EXTI AVD Line Status. + */ +#define __HAL_PWR_AVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL) + +#if defined (DUAL_CORE) +/** + * @brief Check whether the specified AVD EXTI D2 interrupt flag is set or not. + * @retval EXTI D2 AVD Line Status. + */ +#define __HAL_PWR_AVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Clear the AVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Clear the AVD EXTI D2 flag. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Generates a Software interrupt on AVD EXTI line. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_AVD) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Power Supply Control Functions + * @{ + */ +HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource); +uint32_t HAL_PWREx_GetSupplyConfig (void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling); +uint32_t HAL_PWREx_GetVoltageRange (void); +HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling); +uint32_t HAL_PWREx_GetStopModeVoltageRange (void); +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group2 Low Power Control Functions + * @{ + */ +/* System low power control functions */ +#if defined (PWR_CPUCR_RETDS_CD) +void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry); +#endif /* defined (PWR_CPUCR_RETDS_CD) */ +void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain); +void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain); +void HAL_PWREx_ConfigD3Domain (uint32_t D3State); +/* Clear Cortex-Mx pending flag */ +void HAL_PWREx_ClearPendingEvent (void); +#if defined (DUAL_CORE) +/* Clear domain flags */ +void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags); +/* Core Hold/Release functions */ +HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU); +void HAL_PWREx_ReleaseCore (uint32_t CPU); +#endif /* defined (DUAL_CORE) */ +/* Flash low power control functions */ +void HAL_PWREx_EnableFlashPowerDown (void); +void HAL_PWREx_DisableFlashPowerDown (void); +#if defined (PWR_CR1_SRDRAMSO) +/* Memory shut-off functions */ +void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock); +void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock); +#endif /* defined(PWR_CR1_SRDRAMSO) */ +/* Wakeup Pins control functions */ +void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams); +void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin); +uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag); +HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag); +/* Power Wakeup PIN IRQ Handler */ +void HAL_PWREx_WAKEUP_PIN_IRQHandler (void); +void HAL_PWREx_WKUP1_Callback (void); +void HAL_PWREx_WKUP2_Callback (void); +#if defined (PWR_WKUPEPR_WKUPEN3) +void HAL_PWREx_WKUP3_Callback (void); +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +void HAL_PWREx_WKUP4_Callback (void); +#if defined (PWR_WKUPEPR_WKUPEN5) +void HAL_PWREx_WKUP5_Callback (void); +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +void HAL_PWREx_WKUP6_Callback (void); +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group3 Peripherals control functions + * @{ + */ +/* Backup regulator control functions */ +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void); +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void); +/* USB regulator control functions */ +HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void); +HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void); +void HAL_PWREx_EnableUSBVoltageDetector (void); +void HAL_PWREx_DisableUSBVoltageDetector (void); +/* Battery control functions */ +void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue); +void HAL_PWREx_DisableBatteryCharging (void); +#if defined (PWR_CR1_BOOSTE) +/* Analog Booster functions */ +void HAL_PWREx_EnableAnalogBooster (void); +void HAL_PWREx_DisableAnalogBooster (void); +#endif /* PWR_CR1_BOOSTE */ +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group4 Power Monitoring functions + * @{ + */ +/* Power VBAT/Temperature monitoring functions */ +void HAL_PWREx_EnableMonitoring (void); +void HAL_PWREx_DisableMonitoring (void); +uint32_t HAL_PWREx_GetTemperatureLevel (void); +uint32_t HAL_PWREx_GetVBATLevel (void); +#if defined (PWR_CSR1_MMCVDO) +PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void); +#endif /* PWR_CSR1_MMCVDO */ +/* Power AVD configuration functions */ +void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD); +void HAL_PWREx_EnableAVD (void); +void HAL_PWREx_DisableAVD (void); +/* Power PVD/AVD IRQ Handler */ +void HAL_PWREx_PVD_AVD_IRQHandler (void); +void HAL_PWREx_AVDCallback (void); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWREx_Private_Macros PWREx Private Macros + * @{ + */ + +/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters + * @{ + */ +/* Check PWR regulator configuration parameter */ +#if defined (SMPS) +#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\ + ((PWR_SOURCE) == PWR_DIRECT_SMPS_SUPPLY) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT) ||\ + ((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_EXT) ||\ + ((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY)) + +#else +#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\ + ((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY)) +#endif /* defined (SMPS) */ + +/* Check PWR regulator configuration in STOP mode parameter */ +#define IS_PWR_STOP_MODE_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE3) ||\ + ((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE4) ||\ + ((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE5)) + +/* Check PWR domain parameter */ +#if defined (PWR_CPUCR_PDDS_D2) +#define IS_PWR_DOMAIN(DOMAIN) (((DOMAIN) == PWR_D1_DOMAIN) ||\ + ((DOMAIN) == PWR_D2_DOMAIN) ||\ + ((DOMAIN) == PWR_D3_DOMAIN)) +#else +#define IS_PWR_DOMAIN(DOMAIN) (((DOMAIN) == PWR_D1_DOMAIN) ||\ + ((DOMAIN) == PWR_D3_DOMAIN)) +#endif /* defined (PWR_CPUCR_PDDS_D2) */ + +/* Check D3/SRD domain state parameter */ +#define IS_D3_STATE(STATE) (((STATE) == PWR_D3_DOMAIN_STOP) ||\ + ((STATE) == PWR_D3_DOMAIN_RUN)) + +/* Check wake up pin parameter */ +#if defined (PWR_WKUPEPR_WKUPEN3) +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\ + ((PIN) == PWR_WAKEUP_PIN2) ||\ + ((PIN) == PWR_WAKEUP_PIN3) ||\ + ((PIN) == PWR_WAKEUP_PIN4) ||\ + ((PIN) == PWR_WAKEUP_PIN5) ||\ + ((PIN) == PWR_WAKEUP_PIN6) ||\ + ((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN3_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN5_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN1_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN2_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN3_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN4_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN5_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN6_LOW)) +#else +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\ + ((PIN) == PWR_WAKEUP_PIN2) ||\ + ((PIN) == PWR_WAKEUP_PIN4) ||\ + ((PIN) == PWR_WAKEUP_PIN6) ||\ + ((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN1_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN2_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN4_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN6_LOW)) +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ + +/* Check wake up pin polarity parameter */ +#define IS_PWR_WAKEUP_PIN_POLARITY(POLARITY) (((POLARITY) == PWR_PIN_POLARITY_HIGH) ||\ + ((POLARITY) == PWR_PIN_POLARITY_LOW)) + +/* Check wake up pin pull configuration parameter */ +#define IS_PWR_WAKEUP_PIN_PULL(PULL) (((PULL) == PWR_PIN_NO_PULL) ||\ + ((PULL) == PWR_PIN_PULL_UP) ||\ + ((PULL) == PWR_PIN_PULL_DOWN)) + +/* Check wake up flag parameter */ +#if defined (PWR_WKUPEPR_WKUPEN3) +#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\ + ((FLAG) == PWR_WAKEUP_FLAG2) ||\ + ((FLAG) == PWR_WAKEUP_FLAG3) ||\ + ((FLAG) == PWR_WAKEUP_FLAG4) ||\ + ((FLAG) == PWR_WAKEUP_FLAG5) ||\ + ((FLAG) == PWR_WAKEUP_FLAG6) ||\ + ((FLAG) == PWR_WAKEUP_FLAG_ALL)) +#else +#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\ + ((FLAG) == PWR_WAKEUP_FLAG2) ||\ + ((FLAG) == PWR_WAKEUP_FLAG4) ||\ + ((FLAG) == PWR_WAKEUP_FLAG6) ||\ + ((FLAG) == PWR_WAKEUP_FLAG_ALL)) +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ + +/* Check wake up flag parameter */ +#define IS_PWR_AVD_LEVEL(LEVEL) (((LEVEL) == PWR_AVDLEVEL_0) ||\ + ((LEVEL) == PWR_AVDLEVEL_1) ||\ + ((LEVEL) == PWR_AVDLEVEL_2) ||\ + ((LEVEL) == PWR_AVDLEVEL_3)) + +/* Check AVD mode parameter */ +#define IS_PWR_AVD_MODE(MODE) (((MODE) == PWR_AVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_AVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_NORMAL) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_RISING_FALLING)) + +/* Check resistor battery parameter */ +#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\ + ((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) +/* Check D1/CD CPU ID parameter */ +#define IS_PWR_D1_CPU(CPU) ((CPU) == CM7_CPUID) + +#if defined (DUAL_CORE) +/* Check CPU parameter */ +#define IS_PWR_CORE(CPU) (((CPU) == PWR_CORE_CPU1) || ((CPU) == PWR_CORE_CPU2)) + +/* Check D2 CPU ID parameter */ +#define IS_PWR_D2_CPU(CPU) ((CPU) == CM4_CPUID) + +/* Check PWR domain flag parameter */ +#define IS_PWR_DOMAIN_FLAG(FLAG) (((FLAG) == PWR_D1_DOMAIN_FLAGS) || \ + ((FLAG) == PWR_D2_DOMAIN_FLAGS) || \ + ((FLAG) == PWR_ALL_DOMAIN_FLAGS)) +#endif /* defined (DUAL_CORE) */ + +#if defined (PWR_CR1_SRDRAMSO) +/* Check memory block parameter */ +#define IS_PWR_MEMORY_BLOCK(BLOCK) (((BLOCK) == PWR_SRD_AHB_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_USB_FDCAN_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_GFXMMU_JPEG_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_TCM_ECM_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM1_AHB_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM2_AHB_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM1_AXI_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM2_AXI_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM3_AXI_MEMORY_BLOCK)) +#endif /* defined (PWR_CR1_SRDRAMSO) */ +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32H7xx_HAL_PWR_EX_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_qspi.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_qspi.h new file mode 100644 index 0000000..98b2c5c --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_qspi.h @@ -0,0 +1,744 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_qspi.h + * @author MCD Application Team + * @brief Header file of QSPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_QSPI_H +#define STM32H7xx_HAL_QSPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +#if defined(QUADSPI) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup QSPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup QSPI_Exported_Types QSPI Exported Types + * @{ + */ + +/** + * @brief QSPI Init structure definition + */ +typedef struct +{ + uint32_t ClockPrescaler; /* Specifies the prescaler factor for generating clock based on the AHB clock. + This parameter can be a number between 0 and 255 */ + uint32_t FifoThreshold; /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode) + This parameter can be a value between 1 and 32 */ + uint32_t SampleShifting; /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to + take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode) + This parameter can be a value of @ref QSPI_SampleShifting */ + uint32_t FlashSize; /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits + required to address the flash memory. The flash capacity can be up to 4GB + (addressed using 32 bits) in indirect mode, but the addressable space in + memory-mapped mode is limited to 256MB + This parameter can be a number between 0 and 31 */ + uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number + of clock cycles which the chip select must remain high between commands. + This parameter can be a value of @ref QSPI_ChipSelectHighTime */ + uint32_t ClockMode; /* Specifies the Clock Mode. It indicates the level that clock takes between commands. + This parameter can be a value of @ref QSPI_ClockMode */ + uint32_t FlashID; /* Specifies the Flash which will be used, + This parameter can be a value of @ref QSPI_Flash_Select */ + uint32_t DualFlash; /* Specifies the Dual Flash Mode State + This parameter can be a value of @ref QSPI_DualFlash_Mode */ +}QSPI_InitTypeDef; + +/** + * @brief HAL QSPI State structures definition + */ +typedef enum +{ + HAL_QSPI_STATE_RESET = 0x00U, /*!< Peripheral not initialized */ + HAL_QSPI_STATE_READY = 0x01U, /*!< Peripheral initialized and ready for use */ + HAL_QSPI_STATE_BUSY = 0x02U, /*!< Peripheral in indirect mode and busy */ + HAL_QSPI_STATE_BUSY_INDIRECT_TX = 0x12U, /*!< Peripheral in indirect mode with transmission ongoing */ + HAL_QSPI_STATE_BUSY_INDIRECT_RX = 0x22U, /*!< Peripheral in indirect mode with reception ongoing */ + HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42U, /*!< Peripheral in auto polling mode ongoing */ + HAL_QSPI_STATE_BUSY_MEM_MAPPED = 0x82U, /*!< Peripheral in memory mapped mode ongoing */ + HAL_QSPI_STATE_ABORT = 0x08U, /*!< Peripheral with abort request ongoing */ + HAL_QSPI_STATE_ERROR = 0x04U /*!< Peripheral in error */ +}HAL_QSPI_StateTypeDef; + +/** + * @brief QSPI Handle Structure definition + */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) +typedef struct __QSPI_HandleTypeDef +#else +typedef struct +#endif +{ + QUADSPI_TypeDef *Instance; /* QSPI registers base address */ + QSPI_InitTypeDef Init; /* QSPI communication parameters */ + uint8_t *pTxBuffPtr; /* Pointer to QSPI Tx transfer Buffer */ + __IO uint32_t TxXferSize; /* QSPI Tx Transfer size */ + __IO uint32_t TxXferCount; /* QSPI Tx Transfer Counter */ + uint8_t *pRxBuffPtr; /* Pointer to QSPI Rx transfer Buffer */ + __IO uint32_t RxXferSize; /* QSPI Rx Transfer size */ + __IO uint32_t RxXferCount; /* QSPI Rx Transfer Counter */ + MDMA_HandleTypeDef *hmdma; /* QSPI Rx/Tx MDMA Handle parameters */ + __IO HAL_LockTypeDef Lock; /* Locking object */ + __IO HAL_QSPI_StateTypeDef State; /* QSPI communication state */ + __IO uint32_t ErrorCode; /* QSPI Error code */ + uint32_t Timeout; /* Timeout for the QSPI memory access */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + void (* ErrorCallback) (struct __QSPI_HandleTypeDef *hqspi); + void (* AbortCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); + void (* FifoThresholdCallback)(struct __QSPI_HandleTypeDef *hqspi); + void (* CmdCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); + void (* RxCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); + void (* TxCpltCallback) (struct __QSPI_HandleTypeDef *hqspi); + void (* StatusMatchCallback) (struct __QSPI_HandleTypeDef *hqspi); + void (* TimeOutCallback) (struct __QSPI_HandleTypeDef *hqspi); + + void (* MspInitCallback) (struct __QSPI_HandleTypeDef *hqspi); + void (* MspDeInitCallback) (struct __QSPI_HandleTypeDef *hqspi); +#endif +}QSPI_HandleTypeDef; + +/** + * @brief QSPI Command structure definition + */ +typedef struct +{ + uint32_t Instruction; /* Specifies the Instruction to be sent + This parameter can be a value (8-bit) between 0x00 and 0xFF */ + uint32_t Address; /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize) + This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */ + uint32_t AlternateBytes; /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize) + This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */ + uint32_t AddressSize; /* Specifies the Address Size + This parameter can be a value of @ref QSPI_AddressSize */ + uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size + This parameter can be a value of @ref QSPI_AlternateBytesSize */ + uint32_t DummyCycles; /* Specifies the Number of Dummy Cycles. + This parameter can be a number between 0 and 31 */ + uint32_t InstructionMode; /* Specifies the Instruction Mode + This parameter can be a value of @ref QSPI_InstructionMode */ + uint32_t AddressMode; /* Specifies the Address Mode + This parameter can be a value of @ref QSPI_AddressMode */ + uint32_t AlternateByteMode; /* Specifies the Alternate Bytes Mode + This parameter can be a value of @ref QSPI_AlternateBytesMode */ + uint32_t DataMode; /* Specifies the Data Mode (used for dummy cycles and data phases) + This parameter can be a value of @ref QSPI_DataMode */ + uint32_t NbData; /* Specifies the number of data to transfer. (This is the number of bytes) + This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length + until end of memory)*/ + uint32_t DdrMode; /* Specifies the double data rate mode for address, alternate byte and data phase + This parameter can be a value of @ref QSPI_DdrMode */ + uint32_t DdrHoldHalfCycle; /* Specifies if the DDR hold is enabled. When enabled it delays the data + output by one half of system clock in DDR mode. + This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */ + uint32_t SIOOMode; /* Specifies the send instruction only once mode + This parameter can be a value of @ref QSPI_SIOOMode */ +}QSPI_CommandTypeDef; + +/** + * @brief QSPI Auto Polling mode configuration structure definition + */ +typedef struct +{ + uint32_t Match; /* Specifies the value to be compared with the masked status register to get a match. + This parameter can be any value between 0 and 0xFFFFFFFF */ + uint32_t Mask; /* Specifies the mask to be applied to the status bytes received. + This parameter can be any value between 0 and 0xFFFFFFFF */ + uint32_t Interval; /* Specifies the number of clock cycles between two read during automatic polling phases. + This parameter can be any value between 0 and 0xFFFF */ + uint32_t StatusBytesSize; /* Specifies the size of the status bytes received. + This parameter can be any value between 1 and 4 */ + uint32_t MatchMode; /* Specifies the method used for determining a match. + This parameter can be a value of @ref QSPI_MatchMode */ + uint32_t AutomaticStop; /* Specifies if automatic polling is stopped after a match. + This parameter can be a value of @ref QSPI_AutomaticStop */ +}QSPI_AutoPollingTypeDef; + +/** + * @brief QSPI Memory Mapped mode configuration structure definition + */ +typedef struct +{ + uint32_t TimeOutPeriod; /* Specifies the number of clock to wait when the FIFO is full before to release the chip select. + This parameter can be any value between 0 and 0xFFFF */ + uint32_t TimeOutActivation; /* Specifies if the timeout counter is enabled to release the chip select. + This parameter can be a value of @ref QSPI_TimeOutActivation */ +}QSPI_MemoryMappedTypeDef; + +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) +/** + * @brief HAL QSPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_QSPI_ERROR_CB_ID = 0x00U, /*!< QSPI Error Callback ID */ + HAL_QSPI_ABORT_CB_ID = 0x01U, /*!< QSPI Abort Callback ID */ + HAL_QSPI_FIFO_THRESHOLD_CB_ID = 0x02U, /*!< QSPI FIFO Threshold Callback ID */ + HAL_QSPI_CMD_CPLT_CB_ID = 0x03U, /*!< QSPI Command Complete Callback ID */ + HAL_QSPI_RX_CPLT_CB_ID = 0x04U, /*!< QSPI Rx Complete Callback ID */ + HAL_QSPI_TX_CPLT_CB_ID = 0x05U, /*!< QSPI Tx Complete Callback ID */ + HAL_QSPI_STATUS_MATCH_CB_ID = 0x08U, /*!< QSPI Status Match Callback ID */ + HAL_QSPI_TIMEOUT_CB_ID = 0x09U, /*!< QSPI Timeout Callback ID */ + + HAL_QSPI_MSP_INIT_CB_ID = 0x0AU, /*!< QSPI MspInit Callback ID */ + HAL_QSPI_MSP_DEINIT_CB_ID = 0x0B0 /*!< QSPI MspDeInit Callback ID */ +}HAL_QSPI_CallbackIDTypeDef; + +/** + * @brief HAL QSPI Callback pointer definition + */ +typedef void (*pQSPI_CallbackTypeDef)(QSPI_HandleTypeDef *hqspi); +#endif +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup QSPI_Exported_Constants QSPI Exported Constants + * @{ + */ + +/** @defgroup QSPI_ErrorCode QSPI Error Code + * @{ + */ +#define HAL_QSPI_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_QSPI_ERROR_TIMEOUT 0x00000001U /*!< Timeout error */ +#define HAL_QSPI_ERROR_TRANSFER 0x00000002U /*!< Transfer error */ +#define HAL_QSPI_ERROR_DMA 0x00000004U /*!< DMA transfer error */ +#define HAL_QSPI_ERROR_INVALID_PARAM 0x00000008U /*!< Invalid parameters error */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) +#define HAL_QSPI_ERROR_INVALID_CALLBACK 0x00000010U /*!< Invalid callback error */ +#endif +/** + * @} + */ + +/** @defgroup QSPI_SampleShifting QSPI Sample Shifting + * @{ + */ +#define QSPI_SAMPLE_SHIFTING_NONE 0x00000000U /*!State = HAL_QSPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_QSPI_STATE_RESET) +#endif + +/** @brief Enable the QSPI peripheral. + * @param __HANDLE__ specifies the QSPI Handle. + * @retval None + */ +#define __HAL_QSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN) + +/** @brief Disable the QSPI peripheral. + * @param __HANDLE__ specifies the QSPI Handle. + * @retval None + */ +#define __HAL_QSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN) + +/** @brief Enable the specified QSPI interrupt. + * @param __HANDLE__ specifies the QSPI Handle. + * @param __INTERRUPT__ specifies the QSPI interrupt source to enable. + * This parameter can be one of the following values: + * @arg QSPI_IT_TO: QSPI Timeout interrupt + * @arg QSPI_IT_SM: QSPI Status match interrupt + * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt + * @arg QSPI_IT_TC: QSPI Transfer complete interrupt + * @arg QSPI_IT_TE: QSPI Transfer error interrupt + * @retval None + */ +#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) + + +/** @brief Disable the specified QSPI interrupt. + * @param __HANDLE__ specifies the QSPI Handle. + * @param __INTERRUPT__ specifies the QSPI interrupt source to disable. + * This parameter can be one of the following values: + * @arg QSPI_IT_TO: QSPI Timeout interrupt + * @arg QSPI_IT_SM: QSPI Status match interrupt + * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt + * @arg QSPI_IT_TC: QSPI Transfer complete interrupt + * @arg QSPI_IT_TE: QSPI Transfer error interrupt + * @retval None + */ +#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) + +/** @brief Check whether the specified QSPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the QSPI Handle. + * @param __INTERRUPT__ specifies the QSPI interrupt source to check. + * This parameter can be one of the following values: + * @arg QSPI_IT_TO: QSPI Timeout interrupt + * @arg QSPI_IT_SM: QSPI Status match interrupt + * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt + * @arg QSPI_IT_TC: QSPI Transfer complete interrupt + * @arg QSPI_IT_TE: QSPI Transfer error interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Check whether the selected QSPI flag is set or not. + * @param __HANDLE__ specifies the QSPI Handle. + * @param __FLAG__ specifies the QSPI flag to check. + * This parameter can be one of the following values: + * @arg QSPI_FLAG_BUSY: QSPI Busy flag + * @arg QSPI_FLAG_TO: QSPI Timeout flag + * @arg QSPI_FLAG_SM: QSPI Status match flag + * @arg QSPI_FLAG_FT: QSPI FIFO threshold flag + * @arg QSPI_FLAG_TC: QSPI Transfer complete flag + * @arg QSPI_FLAG_TE: QSPI Transfer error flag + * @retval None + */ +#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0U) ? SET : RESET) + +/** @brief Clears the specified QSPI's flag status. + * @param __HANDLE__ specifies the QSPI Handle. + * @param __FLAG__ specifies the QSPI clear register flag that needs to be set + * This parameter can be one of the following values: + * @arg QSPI_FLAG_TO: QSPI Timeout flag + * @arg QSPI_FLAG_SM: QSPI Status match flag + * @arg QSPI_FLAG_TC: QSPI Transfer complete flag + * @arg QSPI_FLAG_TE: QSPI Transfer error flag + * @retval None + */ +#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup QSPI_Exported_Functions + * @{ + */ + +/** @addtogroup QSPI_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_QSPI_Init (QSPI_HandleTypeDef *hqspi); +HAL_StatusTypeDef HAL_QSPI_DeInit (QSPI_HandleTypeDef *hqspi); +void HAL_QSPI_MspInit (QSPI_HandleTypeDef *hqspi); +void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi); +/** + * @} + */ + +/** @addtogroup QSPI_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +/* QSPI IRQ handler method */ +void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi); + +/* QSPI indirect mode */ +HAL_StatusTypeDef HAL_QSPI_Command (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout); +HAL_StatusTypeDef HAL_QSPI_Transmit (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout); +HAL_StatusTypeDef HAL_QSPI_Receive (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout); +HAL_StatusTypeDef HAL_QSPI_Command_IT (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd); +HAL_StatusTypeDef HAL_QSPI_Transmit_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData); +HAL_StatusTypeDef HAL_QSPI_Receive_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData); +HAL_StatusTypeDef HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData); +HAL_StatusTypeDef HAL_QSPI_Receive_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData); + +/* QSPI status flag polling mode */ +HAL_StatusTypeDef HAL_QSPI_AutoPolling (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout); +HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg); + +/* QSPI memory-mapped mode */ +HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg); + +/* Callback functions in non-blocking modes ***********************************/ +void HAL_QSPI_ErrorCallback (QSPI_HandleTypeDef *hqspi); +void HAL_QSPI_AbortCpltCallback (QSPI_HandleTypeDef *hqspi); +void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi); + +/* QSPI indirect mode */ +void HAL_QSPI_CmdCpltCallback (QSPI_HandleTypeDef *hqspi); +void HAL_QSPI_RxCpltCallback (QSPI_HandleTypeDef *hqspi); +void HAL_QSPI_TxCpltCallback (QSPI_HandleTypeDef *hqspi); + +/* QSPI status flag polling mode */ +void HAL_QSPI_StatusMatchCallback (QSPI_HandleTypeDef *hqspi); + +/* QSPI memory-mapped mode */ +void HAL_QSPI_TimeOutCallback (QSPI_HandleTypeDef *hqspi); + +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) +/* QSPI callback registering/unregistering */ +HAL_StatusTypeDef HAL_QSPI_RegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId, pQSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_QSPI_UnRegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId); +#endif +/** + * @} + */ + +/** @addtogroup QSPI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_QSPI_StateTypeDef HAL_QSPI_GetState (const QSPI_HandleTypeDef *hqspi); +uint32_t HAL_QSPI_GetError (const QSPI_HandleTypeDef *hqspi); +HAL_StatusTypeDef HAL_QSPI_Abort (QSPI_HandleTypeDef *hqspi); +HAL_StatusTypeDef HAL_QSPI_Abort_IT (QSPI_HandleTypeDef *hqspi); +void HAL_QSPI_SetTimeout (QSPI_HandleTypeDef *hqspi, uint32_t Timeout); +HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold); +uint32_t HAL_QSPI_GetFifoThreshold(const QSPI_HandleTypeDef *hqspi); +HAL_StatusTypeDef HAL_QSPI_SetFlashID (QSPI_HandleTypeDef *hqspi, uint32_t FlashID); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup QSPI_Private_Macros QSPI Private Macros + * @{ + */ +#define IS_QSPI_CLOCK_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFU) + +#define IS_QSPI_FIFO_THRESHOLD(THR) (((THR) > 0U) && ((THR) <= 32U)) + +#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \ + ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE)) + +#define IS_QSPI_FLASH_SIZE(FSIZE) (((FSIZE) <= 31U)) + +#define IS_QSPI_CS_HIGH_TIME(CSHTIME) (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \ + ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \ + ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \ + ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \ + ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \ + ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \ + ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \ + ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE)) + +#define IS_QSPI_CLOCK_MODE(CLKMODE) (((CLKMODE) == QSPI_CLOCK_MODE_0) || \ + ((CLKMODE) == QSPI_CLOCK_MODE_3)) + +#define IS_QSPI_FLASH_ID(FLASH_ID) (((FLASH_ID) == QSPI_FLASH_ID_1) || \ + ((FLASH_ID) == QSPI_FLASH_ID_2)) + +#define IS_QSPI_DUAL_FLASH_MODE(MODE) (((MODE) == QSPI_DUALFLASH_ENABLE) || \ + ((MODE) == QSPI_DUALFLASH_DISABLE)) + +#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFFU) + +#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE) (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS) || \ + ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \ + ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \ + ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS)) + +#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE) (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS) || \ + ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \ + ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \ + ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS)) + +#define IS_QSPI_DUMMY_CYCLES(DCY) ((DCY) <= 31U) + +#define IS_QSPI_INSTRUCTION_MODE(MODE) (((MODE) == QSPI_INSTRUCTION_NONE) || \ + ((MODE) == QSPI_INSTRUCTION_1_LINE) || \ + ((MODE) == QSPI_INSTRUCTION_2_LINES) || \ + ((MODE) == QSPI_INSTRUCTION_4_LINES)) + +#define IS_QSPI_ADDRESS_MODE(MODE) (((MODE) == QSPI_ADDRESS_NONE) || \ + ((MODE) == QSPI_ADDRESS_1_LINE) || \ + ((MODE) == QSPI_ADDRESS_2_LINES) || \ + ((MODE) == QSPI_ADDRESS_4_LINES)) + +#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE) (((MODE) == QSPI_ALTERNATE_BYTES_NONE) || \ + ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE) || \ + ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \ + ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES)) + +#define IS_QSPI_DATA_MODE(MODE) (((MODE) == QSPI_DATA_NONE) || \ + ((MODE) == QSPI_DATA_1_LINE) || \ + ((MODE) == QSPI_DATA_2_LINES) || \ + ((MODE) == QSPI_DATA_4_LINES)) + +#define IS_QSPI_DDR_MODE(DDR_MODE) (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \ + ((DDR_MODE) == QSPI_DDR_MODE_ENABLE)) + +#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \ + ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY)) + +#define IS_QSPI_SIOO_MODE(SIOO_MODE) (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \ + ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD)) + +#define IS_QSPI_INTERVAL(INTERVAL) ((INTERVAL) <= QUADSPI_PIR_INTERVAL) + +#define IS_QSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1U) && ((SIZE) <= 4U)) + +#define IS_QSPI_MATCH_MODE(MODE) (((MODE) == QSPI_MATCH_MODE_AND) || \ + ((MODE) == QSPI_MATCH_MODE_OR)) + +#define IS_QSPI_AUTOMATIC_STOP(APMS) (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \ + ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE)) + +#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN) (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \ + ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE)) + +#define IS_QSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFFU) +/** +* @} +*/ +/* End of private macros -----------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(QUADSPI) */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_QSPI_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h new file mode 100644 index 0000000..1626c6d --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h @@ -0,0 +1,8266 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_RCC_H +#define STM32H7xx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 63 */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 4 and Max_Data = 512 + or between Min_Data = 8 and Max_Data = 420(*) + (*) : For stm32h7a3xx and stm32h7b3xx family lines. */ + + uint32_t PLLP; /*!< PLLP: Division factor for system clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 128 + odd division factors are not allowed */ + + uint32_t PLLQ; /*!< PLLQ: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t PLLR; /*!< PLLR: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + uint32_t PLLRGE; /*!AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(JPEG) +#define __HAL_RCC_JPGDECEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* QUADSPI */ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPI1 */ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPI2 */ +#if defined(OCTOSPIM) +#define __HAL_RCC_OCTOSPIM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_IOMNGREN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_IOMNGREN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPIM */ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OTFDEC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OTFDEC1EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OTFDEC1 */ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OTFDEC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OTFDEC2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OTFDEC2 */ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_GFXMMUEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_GFXMMUEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* GFXMMU */ +#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_MDMA_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_MDMAEN)) +#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_DMA2DEN)) +#if defined(JPEG) +#define __HAL_RCC_JPGDECEN_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_JPGDECEN)) +#endif /* JPEG */ +#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_FMCEN)) + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_QSPIEN)) +#endif /* QUADSPI */ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_OSPI1EN)) +#endif /* OCTOSPII */ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_OSPI2EN)) +#endif /* OCTOSPI2 */ +#define __HAL_RCC_SDMMC1_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_SDMMC1EN)) +#if defined(OCTOSPIM) +#define __HAL_RCC_OCTOSPIM_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_IOMNGREN)) +#endif /* OCTOSPIM */ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_OTFDEC1EN)) +#endif /* OTOFDEC1 */ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_OTFDEC2EN)) +#endif /* OTOFDEC2 */ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_GFXMMUEN)) +#endif /* GFXMMU */ + +/** @brief Get the enable or disable status of the AHB3 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_MDMA_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_MDMAEN) != 0U) +#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_DMA2DEN) != 0U) +#if defined(JPEG) +#define __HAL_RCC_JPGDECEN_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_JPGDECEN) != 0U) +#endif /* JPEG */ +#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_FMCEN) != 0U) +#if defined (QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_QSPIEN) != 0U) +#endif /* QUADSPI */ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OSPI1EN) != 0U) +#endif /* OCTOSPII */ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OSPI2EN) != 0U) +#endif /* OCTOSPI2 */ +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_SDMMC1EN) != 0U) +#if defined(OCTOSPIM) +#define __HAL_RCC_OCTOSPIM_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_IOMNGREN) != 0U) +#endif /* OCTOSPIM */ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OTFDEC1EN) != 0U) +#endif /* OTOFDEC1 */ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OTFDEC2EN) != 0U) +#endif /* OTOFDEC2 */ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_GFXMMUEN) != 0U) +#endif /* GFXMMU */ + +#define __HAL_RCC_MDMA_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_MDMAEN) == 0U) +#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_DMA2DEN) == 0U) +#if defined(JPEG) +#define __HAL_RCC_JPGDECEN_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_JPGDECEN) == 0U) +#endif /* JPEG */ +#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_FMCEN) == 0U) +#if defined (QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_QSPIEN) == 0U) +#endif /* QUADSPI */ +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_SDMMC1EN) == 0U) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OSPI1EN) == 0U) +#endif +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OSPI2EN) == 0U) +#endif +#if defined(OCTOSPIM) +#define __HAL_RCC_OCTOSPIM_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_IOMNGREN) == 0U) +#endif +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OTFDEC1EN) == 0U) +#endif +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OTFDEC2EN) == 0U) +#endif +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_GFXMMUEN) == 0U) +#endif +/** @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ADC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DUAL_CORE*/ + +#if defined(RCC_AHB1ENR_CRCEN) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ETH1TX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ETH1RX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#define __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_DMA1EN)) +#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_DMA2EN)) +#define __HAL_RCC_ADC12_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ADC12EN)) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ARTEN)) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1ENR_CRCEN) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_CRCEN)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1MACEN)) +#define __HAL_RCC_ETH1TX_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1TXEN)) +#define __HAL_RCC_ETH1RX_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1RXEN)) +#endif +#define __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSEN)) +#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSULPIEN)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSEN)) +#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSULPIEN)) +#endif /* USB2_OTG_FS */ + +/** @brief Get the enable or disable status of the AHB1 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA1EN) != 0U) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA2EN) != 0U) +#define __HAL_RCC_ADC12_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ADC12EN) != 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ARTEN) != 0U) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1ENR_CRCEN) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_CRCEN) != 0U) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1MACEN) != 0U) +#define __HAL_RCC_ETH1TX_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1TXEN) != 0U) +#define __HAL_RCC_ETH1RX_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1RXEN) != 0U) +#endif +#define __HAL_RCC_USB1_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB1OTGHSEN) != 0U) +#define __HAL_RCC_USB1_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB1OTGHSULPIEN) != 0U) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB2OTGHSEN) != 0U) +#define __HAL_RCC_USB2_OTG_FS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB2OTGHSULPIEN) != 0U) +#endif /* USB2_OTG_FS */ + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA1EN) == 0U) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA2EN) == 0U) +#define __HAL_RCC_ADC12_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ADC12EN) == 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ARTEN) == 0U) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1ENR_CRCEN) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_CRCEN) == 0U) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1MACEN) == 0U) +#define __HAL_RCC_ETH1TX_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1TXEN) == 0U) +#define __HAL_RCC_ETH1RX_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1RXEN) == 0U) +#endif +#define __HAL_RCC_USB1_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB1OTGHSEN) == 0U) +#define __HAL_RCC_USB1_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB1OTGHSULPIEN) == 0U) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB2OTGHSEN) == 0U) +#define __HAL_RCC_USB2_OTG_FS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB2OTGHSULPIEN) == 0U) +#endif /* USB2_OTG_FS */ + +/** @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMI_PSSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMI_PSSIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DCMI_CLK_ENABLE() __HAL_RCC_DCMI_PSSI_CLK_ENABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* DCMI && PSSI */ + +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRYP */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(FMAC) +#define __HAL_RCC_FMAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_FMACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_FMACEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* FMAC */ + +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CORDICEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CORDICEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CORDIC */ + +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define __HAL_RCC_D2SRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + UNUSED(tmpreg); \ + } while(0) +#else +#define __HAL_RCC_AHBSRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AHBSRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AHBSRAM1EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* RCC_AHB2ENR_D2SRAM1EN */ + +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define __HAL_RCC_D2SRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + UNUSED(tmpreg); \ + } while(0) +#else +#define __HAL_RCC_AHBSRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AHBSRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AHBSRAM2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* RCC_AHB2ENR_D2SRAM2EN */ + +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define __HAL_RCC_D2SRAM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(RCC_AHB2ENR_HSEMEN) +#define __HAL_RCC_HSEM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HSEMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HSEMEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* RCC_AHB2ENR_HSEMEN */ + +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_BDMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_BDMA1EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* BDMA1 */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_DCMI_PSSIEN)) +#define __HAL_RCC_DCMI_CLK_DISABLE() __HAL_RCC_DCMI_PSSI_CLK_DISABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_DCMIEN)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_CRYPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_HASHEN)) +#endif /* HASH */ +#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_RNGEN)) +#define __HAL_RCC_SDMMC2_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_SDMMC2EN)) +#if defined(FMAC) +#define __HAL_RCC_FMAC_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_FMACEN)) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_CORDICEN)) +#endif /* CORDIC */ +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define __HAL_RCC_D2SRAM1_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM1EN)) +#else +#define __HAL_RCC_AHBSRAM1_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_AHBSRAM1EN)) +#endif /* RCC_AHB2ENR_D2SRAM1EN */ +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define __HAL_RCC_D2SRAM2_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM2EN)) +#else +#define __HAL_RCC_AHBSRAM2_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_AHBSRAM2EN)) +#endif /* RCC_AHB2ENR_D2SRAM2EN */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define __HAL_RCC_D2SRAM3_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM3EN)) +#endif +#if defined(RCC_AHB2ENR_HSEMEN) +#define __HAL_RCC_HSEM_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_HSEMEN)) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_BDMA1EN)) +#endif + +/** @brief Get the enable or disable status of the AHB2 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_DCMI_PSSIEN) != 0U) +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() __HAL_RCC_DCMI_PSSI_IS_CLK_ENABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_DCMIEN) != 0U) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_CRYPEN) != 0U) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_HASHEN) != 0U) +#endif /* HASH */ +#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_RNGEN) != 0U) +#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_SDMMC2EN) != 0U) +#if defined(FMAC) +#define __HAL_RCC_FMAC_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_FMACEN) != 0U) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_CORDICEN) != 0U) +#endif /* CORDIC */ +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define __HAL_RCC_D2SRAM1_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM1EN) != 0U) +#else +#define __HAL_RCC_AHBSRAM1_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_AHBSRAM1EN) != 0U) +#endif /* RCC_AHB2ENR_D2SRAM1EN */ +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define __HAL_RCC_D2SRAM2_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM2EN) != 0U) +#else +#define __HAL_RCC_AHBSRAM2_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_AHBSRAM2EN) != 0U) +#endif /* RCC_AHB2ENR_D2SRAM2EN */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define __HAL_RCC_D2SRAM3_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM3EN) != 0U) +#endif +#if defined(RCC_AHB2ENR_HSEMEN) +#define __HAL_RCC_HSEM_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_HSEMEN) != 0U) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_BDMA1EN) != 0U) +#endif + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_DCMI_PSSIEN) == 0U) +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() __HAL_RCC_DCMI_PSSI_IS_CLK_DISABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_DCMIEN) == 0U) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_CRYPEN) == 0U) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_HASHEN) == 0U) +#endif /* HASH */ +#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_RNGEN) == 0U) +#define __HAL_RCC_SDMMC2_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_SDMMC2EN) == 0U) +#if defined(FMAC) +#define __HAL_RCC_FMAC_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_FMACEN) == 0U) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_CORDICEN) == 0U) +#endif /* CORDIC */ +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define __HAL_RCC_D2SRAM1_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM1EN) == 0U) +#else +#define __HAL_RCC_AHBSRAM1_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_AHBSRAM1EN) == 0U) +#endif /* RCC_AHB2ENR_D2SRAM1EN */ +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define __HAL_RCC_D2SRAM2_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM2EN) == 0U) +#else +#define __HAL_RCC_AHBSRAM2_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_AHBSRAM2EN) == 0U) +#endif /* RCC_AHB2ENR_D2SRAM2EN */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define __HAL_RCC_D2SRAM3_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM3EN) == 0U) +#endif +#if defined(RCC_AHB2ENR_HSEMEN) +#define __HAL_RCC_HSEM_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_HSEMEN) == 0U) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_BDMA1EN) == 0U) +#endif + +/** @brief Enable or disable the AHB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOI */ + +#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_BDMA_CLK_ENABLE() __HAL_RCC_BDMA2_CLK_ENABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_HSEM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(RCC_AHB4ENR_SRDSRAMEN) +#define __HAL_RCC_SRDSRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_SRDSRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_SRDSRAMEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#define __HAL_RCC_BKPRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOAEN) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOBEN) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOCEN) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIODEN) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOEEN) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOFEN) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOGEN) +#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOHEN) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOIEN) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOJEN) +#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOKEN) +#if defined(RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_CRCEN) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMA2EN) +#define __HAL_RCC_BDMA_CLK_DISABLE() __HAL_RCC_BDMA2_CLK_DISABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMAEN) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_ADC3EN) +#endif +#if defined(RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_HSEM_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_HSEMEN) +#endif +#if defined(RCC_AHB4ENR_SRDSRAMEN) +#define __HAL_RCC_SRDSRAM_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_SRDSRAMEN) +#endif +#define __HAL_RCC_BKPRAM_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_BKPRAMEN) + + +/** @brief Get the enable or disable status of the AHB4 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOAEN) != 0U) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOBEN) != 0U) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOCEN) != 0U) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIODEN) != 0U) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOEEN) != 0U) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOFEN) != 0U) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOGEN) != 0U) +#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOHEN) != 0U) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOIEN) != 0U) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOJEN) != 0U) +#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOKEN) != 0U) +#if defined(RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_CRCEN) != 0U) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BDMA2EN) != 0U) +#define __HAL_RCC_BDMA_IS_CLK_ENABLED() __HAL_RCC_BDMA2_IS_CLK_ENABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BDMAEN) != 0U) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_ADC3EN) != 0U) +#endif +#if defined(RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_HSEM_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_HSEMEN) != 0U) +#endif +#if defined(RCC_AHB4ENR_SRDSRAMEN) +#define __HAL_RCC_SRDSRAM_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_SRDSRAMEN) != 0U) +#endif +#define __HAL_RCC_BKPRAM_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BKPRAMEN) != 0U) + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOAEN) == 0U) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOBEN) == 0U) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOCEN) == 0U) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIODEN) == 0U) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOEEN) == 0U) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOFEN) == 0U) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOGEN) == 0U) +#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOHEN) == 0U) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOIEN) == 0U) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOJEN) == 0U) +#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOKEN) == 0U) + +#if defined(RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_CRCEN) == 0U) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BDMA2EN) == 0U) +#define __HAL_RCC_BDMA_IS_CLK_DISABLED() __HAL_RCC_BDMA2_IS_CLK_DISABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BDMAEN) == 0U) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_ADC3EN) == 0U) +#endif +#if defined(RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_HSEM_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_HSEMEN) == 0U) +#endif +#if defined(RCC_AHB4ENR_SRDSRAMEN) +#define __HAL_RCC_SRDSRAM_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_SRDSRAMEN) == 0U) +#endif +#define __HAL_RCC_BKPRAM_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BKPRAMEN) == 0U) + + +/** @brief Enable or disable the APB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB3ENR, RCC_APB3ENR_LTDCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB3ENR, RCC_APB3ENR_LTDCEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB3ENR, RCC_APB3ENR_DSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB3ENR, RCC_APB3ENR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DSI*/ + +#define __HAL_RCC_WWDG1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB3ENR) &= ~ (RCC_APB3ENR_LTDCEN) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB3ENR) &= ~ (RCC_APB3ENR_DSIEN) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_CLK_DISABLE() (RCC->APB3ENR) &= ~ (RCC_APB3ENR_WWDG1EN) + +/** @brief Get the enable or disable status of the APB3 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB3ENR & RCC_APB3ENR_LTDCEN) != 0U) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB3ENR & RCC_APB3ENR_DSIEN) != 0U) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_IS_CLK_ENABLED() ((RCC->APB3ENR & RCC_APB3ENR_WWDG1EN) != 0U) +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB3ENR & RCC_APB3ENR_LTDCEN) == 0U) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB3ENR & RCC_APB3ENR_DSIEN) == 0U) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_IS_CLK_DISABLED() ((RCC->APB3ENR & RCC_APB3ENR_WWDG1EN) == 0U) + + +/** @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DUAL_CORE*/ + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(I2C5) +#define __HAL_RCC_I2C5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C5EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* I2C5 */ + +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DAC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_DAC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_DAC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_CRSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SWPMI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_OPAMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_MDIOS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_FDCANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_FDCANEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM23) +#define __HAL_RCC_TIM23_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_TIM23EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_TIM23EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM23 */ + +#if defined(TIM24) +#define __HAL_RCC_TIM24_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_TIM24EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_TIM24EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM24 */ + +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM2EN) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM3EN) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM4EN) +#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM5EN) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM6EN) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM7EN) +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM12EN) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM13EN) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM14EN) +#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_LPTIM1EN) + +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_WWDG2EN) +#endif /*DUAL_CORE*/ + +#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPI2EN) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPI3EN) +#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPDIFRXEN) +#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_USART2EN) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_USART3EN) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART4EN) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART5EN) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C1EN) +#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C2EN) +#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C3EN) +#if defined(I2C5) +#define __HAL_RCC_I2C5_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C5EN) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_CECEN) +#define __HAL_RCC_DAC12_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_DAC12EN) +#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART7EN) +#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART8EN) +#define __HAL_RCC_CRS_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_CRSEN) +#define __HAL_RCC_SWPMI1_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_SWPMIEN) +#define __HAL_RCC_OPAMP_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_OPAMPEN) +#define __HAL_RCC_MDIOS_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_MDIOSEN) +#define __HAL_RCC_FDCAN_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_FDCANEN) +#if defined(TIM23) +#define __HAL_RCC_TIM23_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_TIM23EN) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_TIM24EN) +#endif /* TIM24 */ + + +/** @brief Get the enable or disable status of the APB1 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM2EN) != 0U) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM3EN) != 0U) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM4EN) != 0U) +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM5EN) != 0U) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM6EN) != 0U) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM7EN) != 0U) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM12EN) != 0U) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM13EN) != 0U) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM14EN) != 0U) +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_LPTIM1EN) != 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_WWDG2EN) != 0U) +#endif /*DUAL_CORE*/ +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPI2EN) != 0U) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPI3EN) != 0U) +#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPDIFRXEN) != 0U) +#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_USART2EN) != 0U) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_USART3EN) != 0U) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART4EN) != 0U) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART5EN) != 0U) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C1EN) != 0U) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C2EN) != 0U) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C3EN) != 0U) +#if defined(I2C5) +#define __HAL_RCC_I2C5_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C5EN) != 0U) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_CECEN) != 0U) +#define __HAL_RCC_DAC12_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_DAC12EN) != 0U) +#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART7EN) != 0U) +#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART8EN) != 0U) +#define __HAL_RCC_CRS_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_CRSEN) != 0U) +#define __HAL_RCC_SWPMI1_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_SWPMIEN) != 0U) +#define __HAL_RCC_OPAMP_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_OPAMPEN) != 0U) +#define __HAL_RCC_MDIOS_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_MDIOSEN) != 0U) +#define __HAL_RCC_FDCAN_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_FDCANEN) != 0U) +#if defined(TIM23) +#define __HAL_RCC_TIM23_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_TIM23EN) != 0U) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_TIM24EN) != 0U) +#endif /* TIM24 */ + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM2EN) == 0U) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM3EN) == 0U) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM4EN) == 0U) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM5EN) == 0U) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM6EN) == 0U) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM7EN) == 0U) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM12EN) == 0U) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM13EN) == 0U) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM14EN) == 0U) +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_LPTIM1EN) == 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_WWDG2EN) == 0U) +#endif /*DUAL_CORE*/ +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPI2EN) == 0U) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPI3EN) == 0U) +#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPDIFRXEN) == 0U) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_USART2EN) == 0U) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_USART3EN) == 0U) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART4EN) == 0U) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART5EN) == 0U) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C1EN) == 0U) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C2EN) == 0U) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C3EN) == 0U) +#if defined(I2C5) +#define __HAL_RCC_I2C5_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C5EN) == 0U) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_CECEN) == 0U) +#define __HAL_RCC_DAC12_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_DAC12EN) == 0U) +#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART7EN) == 0U) +#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART8EN) == 0U) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_CRSEN) == 0U) +#define __HAL_RCC_SWPMI1_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_SWPMIEN) == 0U) +#define __HAL_RCC_OPAMP_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_OPAMPEN) == 0U) +#define __HAL_RCC_MDIOS_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_MDIOSEN) == 0U) +#define __HAL_RCC_FDCAN_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_FDCANEN) == 0U) +#if defined(TIM23) +#define __HAL_RCC_TIM23_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_TIM23EN) == 0U) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_TIM24EN) == 0U) +#endif /* TIM24 */ + + +/** @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(UART9) +#define __HAL_RCC_UART9_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*UART9*/ + +#if defined(USART10) +#define __HAL_RCC_USART10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART10EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*USART10*/ + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*SAI2*/ + +#if defined(SAI3) +#define __HAL_RCC_SAI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI3EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*SAI3*/ + +#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*HRTIM1*/ + +#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM1EN) +#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM8EN) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_USART1EN) +#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_USART6EN) +#if defined(UART9) +#define __HAL_RCC_UART9_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_UART9EN) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_USART10EN) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI1EN) +#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI4EN) +#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM15EN) +#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM16EN) +#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM17EN) +#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI5EN) +#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI1EN) +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI2EN) +#endif /*SAI2*/ +#if defined(SAI3) +#define __HAL_RCC_SAI3_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI3EN) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_DFSDM1EN) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_HRTIMEN) +#endif /*HRTIM*/ + +/** @brief Get the enable or disable status of the APB2 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM1EN) != 0U) +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM8EN) != 0U) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART1EN) != 0U) +#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART6EN) != 0U) +#if defined(UART9) +#define __HAL_RCC_UART9_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_UART9EN) != 0U) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART10EN) != 0U) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI1EN) != 0U) +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI4EN) != 0U) +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM15EN) != 0U) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM16EN) != 0U) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM17EN) != 0U) +#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI5EN) != 0U) +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI1EN) != 0U) +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI2EN) != 0U) +#endif /*SAI2*/ +#if defined(SAI3) +#define __HAL_RCC_SAI3_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI3EN) != 0U) +#endif /* SAI3 */ +#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_DFSDM1EN) != 0U) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_HRTIMEN) != 0U) +#endif /*HRTIM1*/ + +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM1EN) == 0U) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM8EN) == 0U) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART1EN) == 0U) +#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART6EN) == 0U) +#if defined(UART9) +#define __HAL_RCC_UART9_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_UART9EN) == 0U) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART10EN) == 0U) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI1EN) == 0U) +#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI4EN) == 0U) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM15EN) == 0U) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM16EN) == 0U) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM17EN) == 0U) +#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI5EN) == 0U) +#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI1EN) == 0U) +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI2EN) == 0U) +#endif /*SAI2*/ +#if defined(SAI3) +#define __HAL_RCC_SAI3_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI3EN) == 0U) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_DFSDM1EN) == 0U) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_HRTIMEN) == 0U) +#endif /*HRTIM1*/ + +/** @brief Enable or disable the APB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_I2C4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_I2C4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* LPTIM4 */ + +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* LPTIM5 */ + +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_DAC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_DAC2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* DAC2 */ + +#define __HAL_RCC_COMP12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_COMP12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_COMP12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_VREF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SAI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SAI4EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* SAI4 */ + +#define __HAL_RCC_RTC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DTS) +#define __HAL_RCC_DTS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_DTSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_DTSEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DTS*/ + +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_DFSDM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_DFSDM2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DFSDM2*/ + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SYSCFGEN) +#define __HAL_RCC_LPUART1_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPUART1EN) +#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SPI6EN) +#define __HAL_RCC_I2C4_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_I2C4EN) +#define __HAL_RCC_LPTIM2_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM2EN) +#define __HAL_RCC_LPTIM3_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM3EN) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM4EN) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM5EN) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_DAC2EN) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_COMP12EN) +#define __HAL_RCC_VREF_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_VREFEN) +#define __HAL_RCC_RTC_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_RTCAPBEN) +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SAI4EN) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_DTSEN) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_DFSDM2EN) +#endif /*DFSDM2*/ + +/** @brief Get the enable or disable status of the APB4 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_SYSCFGEN) != 0U) +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPUART1EN) != 0U) +#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_SPI6EN) != 0U) +#define __HAL_RCC_I2C4_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_I2C4EN) != 0U) +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM2EN) != 0U) +#define __HAL_RCC_LPTIM3_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM3EN) != 0U) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM4EN) != 0U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM5EN) != 0U) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_DAC2EN) != 0U) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_COMP12EN) != 0U) +#define __HAL_RCC_VREF_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_VREFEN) != 0U) +#define __HAL_RCC_RTC_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_RTCAPBEN) != 0U) +#if defined(SAI4) +#define __HAL_RCC_SAI4_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_SAI4EN) != 0U) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_DTSEN) != 0U) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_DFSDM2EN) != 0U) +#endif /*DFSDM2*/ + +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_SYSCFGEN) == 0U) +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPUART1EN) == 0U) +#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_SPI6EN) == 0U) +#define __HAL_RCC_I2C4_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_I2C4EN) == 0U) +#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM2EN) == 0U) +#define __HAL_RCC_LPTIM3_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM3EN) == 0U) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM4EN) == 0U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM5EN) == 0U) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_DAC2EN) == 0U) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_COMP12EN) == 0U) +#define __HAL_RCC_VREF_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_VREFEN) == 0U) +#define __HAL_RCC_RTC_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_RTCAPBEN) == 0U) +#if defined(SAI4) +#define __HAL_RCC_SAI4_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_SAI4EN) == 0U) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_DTSEN) == 0U) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_DFSDM2EN) == 0U) +#endif /*DFSDM2*/ + +#if defined(DUAL_CORE) + +/* Exported macros for RCC_C1 -------------------------------------------------*/ + +/** @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_MDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_JPGDECEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + UNUSED(tmpreg); \ + } while(0) + + + + +#define __HAL_RCC_C1_MDMA_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_MDMAEN)) +#define __HAL_RCC_C1_DMA2D_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_DMA2DEN)) +#define __HAL_RCC_C1_JPGDECEN_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_JPGDECEN)) +#define __HAL_RCC_C1_FMC_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_FMCEN)) +#define __HAL_RCC_C1_QSPI_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_QSPIEN)) +#define __HAL_RCC_C1_SDMMC1_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_SDMMC1EN)) + + + + +/** @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ADC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ART_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ETH1MAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ETH1TX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ETH1RX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_USB1_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USB1_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USB2_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USB2_OTG_FS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DMA1_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_DMA1EN)) +#define __HAL_RCC_C1_DMA2_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_DMA2EN)) +#define __HAL_RCC_C1_ADC12_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ADC12EN)) +#define __HAL_RCC_C1_ART_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ARTEN)) +#define __HAL_RCC_C1_ETH1MAC_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1MACEN)) +#define __HAL_RCC_C1_ETH1TX_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1TXEN)) +#define __HAL_RCC_C1_ETH1RX_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1RXEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_ULPI_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSULPIEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_ULPI_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSULPIEN)) + +/** @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0) +#if defined(CRYP) +#define __HAL_RCC_C1_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRYP */ + +#if defined(HASH) +#define __HAL_RCC_C1_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* HASH */ + +#define __HAL_RCC_C1_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_D2SRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_D2SRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_D2SRAM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DCMI_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_DCMIEN)) +#if defined(CRYP) +#define __HAL_RCC_C1_CRYP_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_CRYPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C1_HASH_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_HASHEN)) +#endif /* HASH */ +#define __HAL_RCC_C1_RNG_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_RNGEN)) +#define __HAL_RCC_C1_SDMMC2_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_SDMMC2EN)) +#define __HAL_RCC_C1_D2SRAM1_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM1EN)) +#define __HAL_RCC_C1_D2SRAM2_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM2EN)) +#define __HAL_RCC_C1_D2SRAM3_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM3EN)) + +/** @brief Enable or disable the AHB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOJ_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOK_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_BDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_HSEM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_BKPRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_GPIOA_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOAEN) +#define __HAL_RCC_C1_GPIOB_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOBEN) +#define __HAL_RCC_C1_GPIOC_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOCEN) +#define __HAL_RCC_C1_GPIOD_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIODEN) +#define __HAL_RCC_C1_GPIOE_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOEEN) +#define __HAL_RCC_C1_GPIOF_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOFEN) +#define __HAL_RCC_C1_GPIOG_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOGEN) +#define __HAL_RCC_C1_GPIOH_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOHEN) +#define __HAL_RCC_C1_GPIOI_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOIEN) +#define __HAL_RCC_C1_GPIOJ_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOJEN) +#define __HAL_RCC_C1_GPIOK_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOKEN) +#define __HAL_RCC_C1_CRC_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_C1_BDMA_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMAEN) +#define __HAL_RCC_C1_ADC3_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_ADC3EN) +#define __HAL_RCC_C1_HSEM_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_C1_BKPRAM_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_BKPRAMEN) + + +/** @brief Enable or disable the APB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_LTDCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_LTDCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_DSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_WWDG1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LTDC_CLK_DISABLE() (RCC_C1->APB3ENR) &= ~ (RCC_APB3ENR_LTDCEN) +#define __HAL_RCC_C1_DSI_CLK_DISABLE() (RCC_C1->APB3ENR) &= ~ (RCC_APB3ENR_DSIEN) +#define __HAL_RCC_C1_WWDG1_CLK_DISABLE() (RCC_C1->APB3ENR) &= ~ (RCC_APB3ENR_WWDG1EN) + +/** @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_WWDG2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPDIFRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DAC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_DAC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_DAC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_CRSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SWPMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_OPAMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_MDIOS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_FDCANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_FDCANEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_TIM2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM2EN) +#define __HAL_RCC_C1_TIM3_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM3EN) +#define __HAL_RCC_C1_TIM4_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM4EN) +#define __HAL_RCC_C1_TIM5_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM5EN) +#define __HAL_RCC_C1_TIM6_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM6EN) +#define __HAL_RCC_C1_TIM7_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM7EN) +#define __HAL_RCC_C1_TIM12_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM12EN) +#define __HAL_RCC_C1_TIM13_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM13EN) +#define __HAL_RCC_C1_TIM14_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM14EN) +#define __HAL_RCC_C1_LPTIM1_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_LPTIM1EN) +#define __HAL_RCC_C1_WWDG2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_WWDG2EN) +#define __HAL_RCC_C1_SPI2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_SPI2EN) +#define __HAL_RCC_C1_SPI3_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_SPI3EN) +#define __HAL_RCC_C1_SPDIFRX_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_SPDIFRXEN) +#define __HAL_RCC_C1_USART2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_USART2EN) +#define __HAL_RCC_C1_USART3_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_USART3EN) +#define __HAL_RCC_C1_UART4_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_UART4EN) +#define __HAL_RCC_C1_UART5_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_UART5EN) +#define __HAL_RCC_C1_I2C1_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_I2C1EN) +#define __HAL_RCC_C1_I2C2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_I2C2EN) +#define __HAL_RCC_C1_I2C3_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_I2C3EN) +#define __HAL_RCC_C1_CEC_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_CECEN) +#define __HAL_RCC_C1_DAC12_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_DAC12EN) +#define __HAL_RCC_C1_UART7_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_UART7EN) +#define __HAL_RCC_C1_UART8_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_UART8EN) +#define __HAL_RCC_C1_CRS_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_CRSEN) +#define __HAL_RCC_C1_SWPMI_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_SWPMIEN) +#define __HAL_RCC_C1_OPAMP_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_OPAMPEN) +#define __HAL_RCC_C1_MDIOS_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_MDIOSEN) +#define __HAL_RCC_C1_FDCAN_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_FDCANEN) + +/** @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SAI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_HRTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM1EN) +#define __HAL_RCC_C1_TIM8_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM8EN) +#define __HAL_RCC_C1_USART1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_USART1EN) +#define __HAL_RCC_C1_USART6_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_USART6EN) +#define __HAL_RCC_C1_SPI1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SPI1EN) +#define __HAL_RCC_C1_SPI4_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SPI4EN) +#define __HAL_RCC_C1_TIM15_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM15EN) +#define __HAL_RCC_C1_TIM16_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM16EN) +#define __HAL_RCC_C1_TIM17_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM17EN) +#define __HAL_RCC_C1_SPI5_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SPI5EN) +#define __HAL_RCC_C1_SAI1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SAI1EN) +#define __HAL_RCC_C1_SAI2_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SAI2EN) +#define __HAL_RCC_C1_SAI3_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SAI3EN) +#define __HAL_RCC_C1_DFSDM1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_DFSDM1EN) +#define __HAL_RCC_C1_HRTIM1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_HRTIMEN) + +/** @brief Enable or disable the APB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SPI6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SPI6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_I2C4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_I2C4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_I2C4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_COMP12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_COMP12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_COMP12EN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_VREF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_VREFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_VREFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_RTC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SAI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SAI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SAI4EN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_SYSCFG_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_SYSCFGEN) +#define __HAL_RCC_C1_LPUART1_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPUART1EN) +#define __HAL_RCC_C1_SPI6_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_SPI6EN) +#define __HAL_RCC_C1_I2C4_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_I2C4EN) +#define __HAL_RCC_C1_LPTIM2_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM2EN) +#define __HAL_RCC_C1_LPTIM3_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM3EN) +#define __HAL_RCC_C1_LPTIM4_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM4EN) +#define __HAL_RCC_C1_LPTIM5_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM5EN) +#define __HAL_RCC_C1_COMP12_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_COMP12EN) +#define __HAL_RCC_C1_VREF_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_VREFEN) +#define __HAL_RCC_C1_RTC_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_RTCAPBEN) +#define __HAL_RCC_C1_SAI4_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_SAI4EN) + +/* Exported macros for RCC_C2 -------------------------------------------------*/ + +/** @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + + +#define __HAL_RCC_C2_MDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_JPGDECEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_FLASH_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_FLASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_FLASHEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DTCM1_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DTCM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DTCM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DTCM2_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DTCM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DTCM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ITCM_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_ITCMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_ITCMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_D1SRAM1_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_AXISRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_AXISRAMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + UNUSED(tmpreg); \ + } while(0) + + + + +#define __HAL_RCC_C2_MDMA_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_MDMAEN)) +#define __HAL_RCC_C2_DMA2D_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_DMA2DEN)) +#define __HAL_RCC_C2_JPGDECEN_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_JPGDECEN)) +#define __HAL_RCC_C2_FMC_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_FMCEN)) +#define __HAL_RCC_C2_QSPI_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_QSPIEN)) +#define __HAL_RCC_C2_SDMMC1_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_SDMMC1EN)) +#define __HAL_RCC_FLASH_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_FLASHEN)) +#define __HAL_RCC_DTCM1_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_DTCM1EN)) +#define __HAL_RCC_DTCM2_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_DTCM2EN)) +#define __HAL_RCC_ITCM_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_ITCMEN)) +#define __HAL_RCC_D1SRAM1_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_AXISRAMEN)) + +/** @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ADC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ART_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ETH1MAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ETH1TX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ETH1RX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USB1_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USB1_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USB2_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USB2_OTG_FS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C2_DMA1_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_DMA1EN)) +#define __HAL_RCC_C2_DMA2_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_DMA2EN)) +#define __HAL_RCC_C2_ADC12_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ADC12EN)) +#define __HAL_RCC_C2_ART_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ARTEN)) +#define __HAL_RCC_C2_ETH1MAC_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1MACEN)) +#define __HAL_RCC_C2_ETH1TX_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1TXEN)) +#define __HAL_RCC_C2_ETH1RX_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1RXEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_ULPI_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSULPIEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_ULPI_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSULPIEN)) + +/** @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(CRYP) +#define __HAL_RCC_C2_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRYP */ + +#if defined(HASH) +#define __HAL_RCC_C2_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* HASH */ + +#define __HAL_RCC_C2_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_D2SRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_D2SRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_D2SRAM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DCMI_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_DCMIEN)) +#if defined(CRYP) +#define __HAL_RCC_C2_CRYP_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_CRYPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C2_HASH_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_HASHEN)) +#endif /* HASH */ +#define __HAL_RCC_C2_RNG_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_RNGEN)) +#define __HAL_RCC_C2_SDMMC2_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_SDMMC2EN)) +#define __HAL_RCC_C2_D2SRAM1_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM1EN)) +#define __HAL_RCC_C2_D2SRAM2_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM2EN)) +#define __HAL_RCC_C2_D2SRAM3_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM3EN)) + +/** @brief Enable or disable the AHB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOJ_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOK_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_BDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_HSEM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_BKPRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C2_GPIOA_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOAEN) +#define __HAL_RCC_C2_GPIOB_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOBEN) +#define __HAL_RCC_C2_GPIOC_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOCEN) +#define __HAL_RCC_C2_GPIOD_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIODEN) +#define __HAL_RCC_C2_GPIOE_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOEEN) +#define __HAL_RCC_C2_GPIOF_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOFEN) +#define __HAL_RCC_C2_GPIOG_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOGEN) +#define __HAL_RCC_C2_GPIOH_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOHEN) +#define __HAL_RCC_C2_GPIOI_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOIEN) +#define __HAL_RCC_C2_GPIOJ_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOJEN) +#define __HAL_RCC_C2_GPIOK_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOKEN) +#define __HAL_RCC_C2_CRC_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_C2_BDMA_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMAEN) +#define __HAL_RCC_C2_ADC3_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_ADC3EN) +#define __HAL_RCC_C2_HSEM_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_C2_BKPRAM_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_BKPRAMEN) + + +/** @brief Enable or disable the APB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_LTDCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_LTDCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_DSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_WWDG1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LTDC_CLK_DISABLE() (RCC_C2->APB3ENR) &= ~ (RCC_APB3ENR_LTDCEN) +#define __HAL_RCC_C2_DSI_CLK_DISABLE() (RCC_C2->APB3ENR) &= ~ (RCC_APB3ENR_DSIEN) +#define __HAL_RCC_C2_WWDG1_CLK_DISABLE() (RCC_C2->APB3ENR) &= ~ (RCC_APB3ENR_WWDG1EN) + +/** @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_WWDG2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPDIFRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DAC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_DAC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_DAC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_CRSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SWPMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_OPAMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_MDIOS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_FDCANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_FDCANEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C2_TIM2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM2EN) +#define __HAL_RCC_C2_TIM3_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM3EN) +#define __HAL_RCC_C2_TIM4_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM4EN) +#define __HAL_RCC_C2_TIM5_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM5EN) +#define __HAL_RCC_C2_TIM6_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM6EN) +#define __HAL_RCC_C2_TIM7_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM7EN) +#define __HAL_RCC_C2_TIM12_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM12EN) +#define __HAL_RCC_C2_TIM13_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM13EN) +#define __HAL_RCC_C2_TIM14_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM14EN) +#define __HAL_RCC_C2_LPTIM1_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_LPTIM1EN) +#define __HAL_RCC_C2_WWDG2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_WWDG2EN) +#define __HAL_RCC_C2_SPI2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_SPI2EN) +#define __HAL_RCC_C2_SPI3_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_SPI3EN) +#define __HAL_RCC_C2_SPDIFRX_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_SPDIFRXEN) +#define __HAL_RCC_C2_USART2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_USART2EN) +#define __HAL_RCC_C2_USART3_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_USART3EN) +#define __HAL_RCC_C2_UART4_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_UART4EN) +#define __HAL_RCC_C2_UART5_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_UART5EN) +#define __HAL_RCC_C2_I2C1_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_I2C1EN) +#define __HAL_RCC_C2_I2C2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_I2C2EN) +#define __HAL_RCC_C2_I2C3_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_I2C3EN) +#define __HAL_RCC_C2_CEC_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_CECEN) +#define __HAL_RCC_C2_DAC12_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_DAC12EN) +#define __HAL_RCC_C2_UART7_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_UART7EN) +#define __HAL_RCC_C2_UART8_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_UART8EN) +#define __HAL_RCC_C2_CRS_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_CRSEN) +#define __HAL_RCC_C2_SWPMI_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_SWPMIEN) +#define __HAL_RCC_C2_OPAMP_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_OPAMPEN) +#define __HAL_RCC_C2_MDIOS_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_MDIOSEN) +#define __HAL_RCC_C2_FDCAN_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_FDCANEN) + +/** @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SAI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_HRTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM1EN) +#define __HAL_RCC_C2_TIM8_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM8EN) +#define __HAL_RCC_C2_USART1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_USART1EN) +#define __HAL_RCC_C2_USART6_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_USART6EN) +#define __HAL_RCC_C2_SPI1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SPI1EN) +#define __HAL_RCC_C2_SPI4_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SPI4EN) +#define __HAL_RCC_C2_TIM15_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM15EN) +#define __HAL_RCC_C2_TIM16_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM16EN) +#define __HAL_RCC_C2_TIM17_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM17EN) +#define __HAL_RCC_C2_SPI5_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SPI5EN) +#define __HAL_RCC_C2_SAI1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SAI1EN) +#define __HAL_RCC_C2_SAI2_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SAI2EN) +#define __HAL_RCC_C2_SAI3_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SAI3EN) +#define __HAL_RCC_C2_DFSDM1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_DFSDM1EN) +#define __HAL_RCC_C2_HRTIM1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_HRTIMEN) + +/** @brief Enable or disable the APB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SPI6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SPI6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_I2C4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_I2C4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_I2C4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_COMP12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_COMP12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_COMP12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_VREF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_VREFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_VREFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_RTC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SAI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SAI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SAI4EN);\ + UNUSED(tmpreg); \ + } while(0) + + + +#define __HAL_RCC_C2_SYSCFG_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_SYSCFGEN) +#define __HAL_RCC_C2_LPUART1_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPUART1EN) +#define __HAL_RCC_C2_SPI6_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_SPI6EN) +#define __HAL_RCC_C2_I2C4_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_I2C4EN) +#define __HAL_RCC_C2_LPTIM2_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM2EN) +#define __HAL_RCC_C2_LPTIM3_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM3EN) +#define __HAL_RCC_C2_LPTIM4_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM4EN) +#define __HAL_RCC_C2_LPTIM5_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM5EN) +#define __HAL_RCC_C2_COMP12_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_COMP12EN) +#define __HAL_RCC_C2_VREF_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_VREFEN) +#define __HAL_RCC_C2_RTC_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_RTCAPBEN) +#define __HAL_RCC_C2_SAI4_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_SAI4EN) + +#endif /*DUAL_CORE*/ + +/** @brief Enable or disable the AHB3 peripheral reset. + */ + +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0x00015031U) /* Resets MDMA, DMA2D, JPEG, FMC, QSPI and SDMMC1 */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0x01E95031U) /* Resets MDMA, DMA2D, JPEG, FMC, OSPI1, SDMMC1, OSPI2, IOMNGR, OTFD1, OTFD2 and GFXMMU */ +#else +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0x00E95011U) /* Resets MDMA, DMA2D, FMC, OSPI1, SDMMC1, OSPI2, IOMNGR, OTFD1, OTFD2 */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_MDMA_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_MDMARST)) +#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_DMA2DRST)) +#if defined(JPEG) +#define __HAL_RCC_JPGDECRST_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_JPGDECRST)) +#endif /* JPEG */ +#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) +#endif /*QUADSPI*/ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_OSPI1RST)) +#endif /*OCTOSPI1*/ +#define __HAL_RCC_SDMMC1_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_SDMMC1RST)) +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_OSPI2RST)) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_IOMNGRRST)) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_OTFDEC1RST)) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_OTFDEC2RST)) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_GFXMMURST)) +#endif /*GFXMMU*/ + +#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00) +#define __HAL_RCC_MDMA_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_MDMARST)) +#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_DMA2DRST)) +#if defined(JPEG) +#define __HAL_RCC_JPGDECRST_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_JPGDECRST)) +#endif /* JPEG */ +#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_FMCRST)) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_QSPIRST)) +#endif /*QUADSPI*/ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_OSPI1RST)) +#endif /*OCTOSPI1*/ +#define __HAL_RCC_SDMMC1_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_SDMMC1RST)) +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_OSPI2RST)) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_IOMNGRRST)) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_OTFDEC1RST)) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_OTFDEC2RST)) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_GFXMMURST)) +#endif /*GFXMMU*/ + + + +/** @brief Force or release the AHB1 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0x0A00C023U) /* Resets DMA1, DMA2, ADC12, ART, ETHMAC, USB1OTG and USB2OTG */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0x02000223U) /* Resets DMA1, DMA2, ADC12, CRC and USB1OTG */ +#else +#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0x02008023U) /* Resets DMA1, DMA2, ADC12, ETHMAC and USB1OTG */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST)) +#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST)) +#define __HAL_RCC_ADC12_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ADC12RST)) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ARTRST)) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1RSTR_CRCRST) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETH1MACRST)) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_USB1OTGHSRST)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_USB2OTGHSRST)) +#endif /*USB2_OTG_FS*/ + +#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) +#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_DMA1RST)) +#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_DMA2RST)) +#define __HAL_RCC_ADC12_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_ADC12RST)) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_ARTRST)) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1RSTR_CRCRST) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_CRCRST)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_ETH1MACRST)) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_USB1OTGHSRST)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_USB2OTGHSRST)) +#endif /*USB2_OTG_FS*/ + +/** @brief Force or release the AHB2 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0x00000271U) /* Resets DCMI, CRYPT, HASH, RNG and SDMMC2 */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0x00000A75U) /* Resets DCMI_PSSI, HSEM, CRYPT, HASH, RNG, SDMMC2 and BDMA1 */ +#else +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0x00030271U) /* Resets DCMI_PSSI, CRYPT, HASH, RNG, SDMMC2, FMAC and CORDIC */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMI_PSSIRST)) +#define __HAL_RCC_DCMI_FORCE_RESET() __HAL_RCC_DCMI_PSSI_FORCE_RESET() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) +#endif /* HASH */ +#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_SDMMC2_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_SDMMC2RST)) +#if defined(FMAC) +#define __HAL_RCC_FMAC_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_FMACRST)) +#endif /*FMAC*/ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CORDICRST)) +#endif /*CORDIC*/ +#if defined(RCC_AHB2RSTR_HSEMRST) +#define __HAL_RCC_HSEM_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HSEMRST)) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_BDMA1RST)) +#endif /*BDMA1*/ + +#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_DCMI_PSSIRST)) +#define __HAL_RCC_DCMI_RELEASE_RESET() __HAL_RCC_DCMI_PSSI_RELEASE_RESET() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_DCMIRST)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_CRYPRST)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_HASHRST)) +#endif /* HASH */ +#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_SDMMC2_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_SDMMC2RST)) +#if defined(FMAC) +#define __HAL_RCC_FMAC_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_FMACRST)) +#endif /*FMAC*/ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_CORDICRST)) +#endif /*CORDIC*/ +#if defined(RCC_AHB2RSTR_HSEMRST) +#define __HAL_RCC_HSEM_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_HSEMRST)) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_BDMA1RST)) +#endif /*BDMA1*/ + + +/** @brief Force or release the AHB4 peripheral reset. + */ + +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_AHB4_FORCE_RESET() (RCC->AHB4RSTR = 0x032807FFU) /* Resets GPIOA..GPIOK, CRC, BDMA, ADC3 and HSEM */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_AHB4_FORCE_RESET() (RCC->AHB4RSTR = 0x002007FFU) /* Resets GPIOA..GPIOK and BDMA2 */ +#else +#define __HAL_RCC_AHB4_FORCE_RESET() (RCC->AHB4RSTR = 0x032806FFU) /* Resets GPIOA..GPIOH, GPIOJ, GPIOK, CRC, BDMA, ADC3 and HSEM */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOARST) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIODRST) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOERST) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOFRST) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOGRST) +#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOHRST) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOIRST) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOJRST) +#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOKRST) +#if defined(RCC_AHB4RSTR_CRCRST) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_CRCRST) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_BDMA2RST) +#define __HAL_RCC_BDMA_FORCE_RESET() __HAL_RCC_BDMA2_FORCE_RESET() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_BDMARST) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_ADC3RST) +#endif /*ADC3*/ +#if defined(RCC_AHB4RSTR_HSEMRST) +#define __HAL_RCC_HSEM_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_HSEMRST) +#endif + +#define __HAL_RCC_AHB4_RELEASE_RESET() (RCC->AHB4RSTR = 0x00U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOARST) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIODRST) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOERST) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOFRST) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOGRST) +#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOHRST) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOIRST) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOJRST) +#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOKRST) +#if defined(RCC_AHB4RSTR_CRCRST) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_CRCRST) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_BDMA2RST) +#define __HAL_RCC_BDMA_RELEASE_RESET() __HAL_RCC_BDMA2_RELEASE_RESET() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_BDMARST) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_ADC3RST) +#endif /*ADC3*/ +#if defined(RCC_AHB4RSTR_HSEMRST) +#define __HAL_RCC_HSEM_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_HSEMRST) +#endif + +/** @brief Force or release the APB3 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_APB3_FORCE_RESET() (RCC->APB3RSTR = 0x00000018U) /* Rests LTDC and DSI */ +#else +#define __HAL_RCC_APB3_FORCE_RESET() (RCC->APB3RSTR = 0x00000008U) /* Rests LTDC */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#if defined(LTDC) +#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB3RSTR) |= (RCC_APB3RSTR_LTDCRST) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB3RSTR) |= (RCC_APB3RSTR_DSIRST) +#endif /*DSI*/ + +#define __HAL_RCC_APB3_RELEASE_RESET() (RCC->APB3RSTR = 0x00U) +#if defined(LTDC) +#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB3RSTR) &= ~ (RCC_APB3RSTR_LTDCRST) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB3RSTR) &= ~ (RCC_APB3RSTR_DSIRST) +#endif /*DSI*/ + +/** @brief Force or release the APB1 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) || (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_APB1L_FORCE_RESET() (RCC->APB1LRSTR = 0xE8FFC3FFU) /* Resets TIM2..TIM7, TIM12..TIM14, LPTIM1, SPI2, SPI3, SPDIFRX, USART2, USART3, UART4, UART5, I2C1..I2C3, CEC, DAC1(2), UART7 and UART8 */ +#else +#define __HAL_RCC_APB1L_FORCE_RESET() (RCC->APB1LRSTR = 0xEAFFC3FFU) /* Resets TIM2..TIM7, TIM12..TIM14, LPTIM1, SPI2, SPI3, SPDIFRX, USART2, USART3, UART4, UART5, I2C1..I2C3, I2C5, CEC, DAC12, UART7 and UART8 */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#if (STM32H7_DEV_ID == 0x450UL) || (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_APB1H_FORCE_RESET() (RCC->APB1HRSTR = 0x00000136U) /* Resets CRS, SWP, OPAMP, MDIOS and FDCAN */ +#else +#define __HAL_RCC_APB1H_FORCE_RESET() (RCC->APB1HRSTR = 0x03000136U) /* Resets CRS, SWP, OPAMP, MDIOS, FDCAN, TIM23 and TIM24 */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM2RST) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM3RST) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM4RST) +#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM5RST) +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM6RST) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM7RST) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM12RST) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM13RST) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM14RST) +#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_LPTIM1RST) +#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPI2RST) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPI3RST) +#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPDIFRXRST) +#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_USART2RST) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_USART3RST) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART4RST) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART5RST) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C1RST) +#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C2RST) +#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C3RST) +#if defined(I2C5) +#define __HAL_RCC_I2C5_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C5RST) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_CECRST) +#define __HAL_RCC_DAC12_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_DAC12RST) +#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART7RST) +#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART8RST) +#define __HAL_RCC_CRS_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_CRSRST) +#define __HAL_RCC_SWPMI1_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_SWPMIRST) +#define __HAL_RCC_OPAMP_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_OPAMPRST) +#define __HAL_RCC_MDIOS_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_MDIOSRST) +#define __HAL_RCC_FDCAN_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_FDCANRST) +#if defined(TIM23) +#define __HAL_RCC_TIM23_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_TIM23RST) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_TIM24RST) +#endif /* TIM24 */ + +#define __HAL_RCC_APB1L_RELEASE_RESET() (RCC->APB1LRSTR = 0x00U) +#define __HAL_RCC_APB1H_RELEASE_RESET() (RCC->APB1HRSTR = 0x00U) +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM2RST) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM3RST) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM4RST) +#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM5RST) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM6RST) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM7RST) +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM12RST) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM13RST) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM14RST) +#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_LPTIM1RST) +#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPI2RST) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPI3RST) +#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPDIFRXRST) +#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_USART2RST) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_USART3RST) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART4RST) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART5RST) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C1RST) +#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C2RST) +#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C3RST) +#if defined(I2C5) +#define __HAL_RCC_I2C5_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C5RST) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_CECRST) +#define __HAL_RCC_DAC12_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_DAC12RST) +#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART7RST) +#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART8RST) +#define __HAL_RCC_CRS_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_CRSRST) +#define __HAL_RCC_SWPMI1_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_SWPMIRST) +#define __HAL_RCC_OPAMP_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_OPAMPRST) +#define __HAL_RCC_MDIOS_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_MDIOSRST) +#define __HAL_RCC_FDCAN_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_FDCANRST) +#if defined(TIM23) +#define __HAL_RCC_TIM23_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_TIM23RST) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_TIM24RST) +#endif /* TIM24 */ + +/** @brief Force or release the APB2 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0x31D73033U) /* Resets TIM1, TIM8, USART1, USART6, SPI1, SPI4, TIM15..TIM17, SPI5, SAI1..SAI3, DFSDM1 and HRTIM */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0x40D730F3U) /* Resets TIM1, TIM8, USART1, USART6, UART9, USART10, SPI1, SPI4, TIM15..TIM17, SPI5, SAI1, SAI2 and DFSDM1 */ +#else +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0x405730F3U) /* Resets TIM1, TIM8, USART1, USART6, UART9, USART10, SPI1, SPI4, TIM15..TIM17, SPI5, SAI1 and DFSDM1 */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM1RST) +#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM8RST) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_USART1RST) +#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_USART6RST) +#if defined(UART9) +#define __HAL_RCC_UART9_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_UART9RST) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_USART10RST) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI1RST) +#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI4RST) +#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM15RST) +#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM16RST) +#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM17RST) +#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI5RST) +#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI1RST) +#if defined(SAI2) +#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI2RST) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI3RST) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_DFSDM1RST) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_HRTIMRST) +#endif /*HRTIM1*/ + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) +#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM1RST) +#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM8RST) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_USART1RST) +#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_USART6RST) +#if defined(UART9) +#define __HAL_RCC_UART9_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_UART9RST) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_USART10RST) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI1RST) +#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI4RST) +#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM15RST) +#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM16RST) +#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM17RST) +#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI5RST) +#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI1RST) +#if defined(SAI2) +#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI2RST) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI3RST) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_DFSDM1RST) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_HRTIMRST) +#endif /*HRTIM1*/ + +/** @brief Force or release the APB4 peripheral reset. + */ + +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_APB4_FORCE_RESET() (RCC->APB4RSTR = 0x0020DEAAU) /* Resets SYSCFG, LPUART1, SPI6, I2C4, LPTIM2..LPTIM5, COMP12, VREF and SAI4 */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_APB4_FORCE_RESET() (RCC->APB4RSTR = 0x0C00E6AAU) /* Resets SYSCFG, LPUART1, SPI6, I2C4, LPTIM2, LPTIM3, DAC2, COMP12, VREF, DTS and DFSDM2 */ +#else +#define __HAL_RCC_APB4_FORCE_RESET() (RCC->APB4RSTR = 0x0420DEAAU) /* Resets SYSCFG, LPUART1, SPI6, I2C4, LPTIM2..LPTIM5, COMP12, VREF, SAI4 and DTS */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_SYSCFGRST) +#define __HAL_RCC_LPUART1_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPUART1RST) +#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_SPI6RST) +#define __HAL_RCC_I2C4_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_I2C4RST) +#define __HAL_RCC_LPTIM2_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM2RST) +#define __HAL_RCC_LPTIM3_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM3RST) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM4RST) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM5RST) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_DAC2RST) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_COMP12RST) +#define __HAL_RCC_VREF_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_VREFRST) +#if defined(SAI4) +#define __HAL_RCC_SAI4_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_SAI4RST) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_DTSRST) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_DFSDM2RST) +#endif /*DFSDM2*/ + +#define __HAL_RCC_APB4_RELEASE_RESET() (RCC->APB4RSTR = 0x00U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SYSCFGRST) +#define __HAL_RCC_LPUART1_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPUART1RST) +#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SPI6RST) +#define __HAL_RCC_I2C4_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_I2C4RST) +#define __HAL_RCC_LPTIM2_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM2RST) +#define __HAL_RCC_LPTIM3_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM3RST) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM4RST) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM5RST) +#endif /*LPTIM5*/ +#if defined(RCC_APB4RSTR_DAC2RST) +#define __HAL_RCC_DAC2_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_DAC2RST) +#endif +#define __HAL_RCC_COMP12_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_COMP12RST) +#define __HAL_RCC_VREF_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_VREFRST) +#if defined(SAI4) +#define __HAL_RCC_SAI4_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SAI4RST) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_DTSRST) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_DFSDM2RST) +#endif /*DFSDM2*/ + +/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + + +#define __HAL_RCC_MDMA_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DMA2DLPEN)) +#if defined(JPEG) +#define __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_JPGDECLPEN)) +#endif /* JPEG */ +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) +#endif /*QUADSPI*/ +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_SDMMC1LPEN)) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_OSPI1LPEN)) +#endif /*OCTOSPI1*/ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_OSPI2LPEN)) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_IOMNGRLPEN)) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_OTFDEC1LPEN)) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_OTFDEC2LPEN)) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_GFXMMULPEN)) +#endif /*GFXMMU*/ +#if defined(CD_AXISRAM2_BASE) +#define __HAL_RCC_AXISRAM2_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAM2LPEN)) +#endif +#if defined(CD_AXISRAM3_BASE) +#define __HAL_RCC_AXISRAM3_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAM3LPEN)) +#endif +#define __HAL_RCC_DTCM1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_DTCM2_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_ITCM_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_ITCMLPEN)) +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define __HAL_RCC_D1SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAMLPEN)) +#define __HAL_RCC_AXISRAM_CLK_SLEEP_ENABLE __HAL_RCC_D1SRAM1_CLK_SLEEP_ENABLE +#else +#define __HAL_RCC_AXISRAM1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAM1LPEN)) +#define __HAL_RCC_D1SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_AXISRAM1_CLK_SLEEP_ENABLE /* For backward compatibility */ +#endif /* RCC_AHB3LPENR_AXISRAMLPEN */ + +#define __HAL_RCC_MDMA_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DMA2DLPEN)) +#if defined(JPEG) +#define __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_JPGDECLPEN)) +#endif /* JPEG */ +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_FMCLPEN)) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_QSPILPEN)) +#endif /*QUADSPI*/ +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_SDMMC1LPEN)) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_OSPI1LPEN)) +#endif /*OCTOSPI1*/ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_OSPI2LPEN)) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_IOMNGRLPEN)) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_OTFDEC1LPEN)) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_OTFDEC2LPEN)) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_GFXMMULPEN)) +#endif /*GFXMMU*/ +#if defined(CD_AXISRAM2_BASE) +#define __HAL_RCC_AXISRAM2_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAM2LPEN)) +#endif +#if defined(CD_AXISRAM3_BASE) +#define __HAL_RCC_AXISRAM3_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAM3LPEN)) +#endif +#define __HAL_RCC_DTCM1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_DTCM2_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_ITCM_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_ITCMLPEN)) +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define __HAL_RCC_D1SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAMLPEN)) +#define __HAL_RCC_AXISRAM_CLK_SLEEP_DISABLE __HAL_RCC_D1SRAM1_CLK_SLEEP_DISABLE +#else +#define __HAL_RCC_AXISRAM1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAM1LPEN)) +#define __HAL_RCC_D1SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_AXISRAM1_CLK_SLEEP_DISABLE /* For backward compatibility */ +#endif /* RCC_AHB3LPENR_AXISRAMLPEN */ + +/** @brief Get the enable or disable status of the AHB3 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_MDMA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_MDMALPEN) != 0U) +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DMA2DLPEN) != 0U) +#if defined(JPEG) +#define __HAL_RCC_JPGDEC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_JPGDECLPEN) != 0U) +#endif /* JPEG */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_FLASHLPEN) != 0U) +#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_FMCLPEN) != 0U) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_QSPILPEN) != 0U) +#endif /*QUADSPI*/ +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_SDMMC1LPEN) != 0U) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OSPI1LPEN) != 0U) +#endif /*OCTOSPI1*/ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OSPI2LPEN) != 0U) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_IOMNGRLPEN) != 0U) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OTFDEC1LPEN) != 0U) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OTFDEC2LPEN) != 0U) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_GFXMMULPEN) != 0U) +#endif /*GFXMMU*/ +#if defined(CD_AXISRAM2_BASE) +#define __HAL_RCC_AXISRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM2LPEN) != 0U) +#endif +#if defined(CD_AXISRAM3_BASE) +#define __HAL_RCC_AXISRAM3_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM3LPEN) != 0U) +#endif +#define __HAL_RCC_DTCM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DTCM1LPEN) != 0U) +#define __HAL_RCC_DTCM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DTCM2LPEN) != 0U) +#define __HAL_RCC_ITCM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_ITCMLPEN) != 0U) +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define __HAL_RCC_D1SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAMLPEN) != 0U) +#else +#define __HAL_RCC_AXISRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM1LPEN) != 0U) +#endif + +#define __HAL_RCC_MDMA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_MDMALPEN) == 0U) +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DMA2DLPEN) == 0U) +#if defined(JPEG) +#define __HAL_RCC_JPGDEC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_JPGDECLPEN) == 0U) +#endif /* JPEG */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_FLASHLPEN) == 0U) +#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_FMCLPEN) == 0U) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_QSPILPEN) == 0U) +#endif /*QUADSPI*/ +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_SDMMC1LPEN) == 0U) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OSPI1LPEN) == 0U) +#endif /*OCTOSPI1*/ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OSPI2LPEN) == 0U) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_IOMNGRLPEN) == 0U) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OTFDEC1LPEN) == 0U) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OTFDEC2LPEN) == 0U) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_GFXMMULPEN) == 0U) +#endif /*GFXMMU*/ +#if defined(CD_AXISRAM2_BASE) +#define __HAL_RCC_AXISRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM2LPEN) == 0U) +#endif +#if defined(CD_AXISRAM3_BASE) +#define __HAL_RCC_AXISRAM3_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM3LPEN) == 0U) +#endif +#define __HAL_RCC_DTCM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DTCM1LPEN) == 0U) +#define __HAL_RCC_DTCM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DTCM2LPEN) == 0U) +#define __HAL_RCC_ITCM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_ITCMLPEN) == 0U) +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define __HAL_RCC_D1SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAMLPEN) == 0U) +#else +#define __HAL_RCC_AXISRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAML1PEN) == 0U) +#endif /* RCC_AHB3LPENR_AXISRAMLPEN */ + +/** @brief ENABLE or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_ADC12_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ADC12LPEN)) +#if defined(RCC_AHB1LPENR_CRCLPEN) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1MACLPEN)) +#endif /*ETH*/ +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ARTLPEN)) +#endif /*DUAL_CORE*/ +#if defined(ETH) +#define __HAL_RCC_ETH1TX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_ETH1RX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1RXLPEN)) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) +#endif /* USB2_OTG_FS */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_ADC12_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ADC12LPEN)) +#if defined(RCC_AHB1LPENR_CRCLPEN) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_CRCLPEN)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1MACLPEN)) +#endif /*ETH*/ +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ARTLPEN)) +#endif /*DUAL_CORE*/ +#if defined(ETH) +#define __HAL_RCC_ETH1TX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_ETH1RX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1RXLPEN)) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) +#endif /* USB2_OTG_FS */ + +/** @brief Get the enable or disable status of the AHB1 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) != 0U) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) != 0U) +#define __HAL_RCC_ADC12_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ADC12LPEN)) != 0U) +#if defined(RCC_AHB1LPENR_CRCLPEN) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) != 0U) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1MACLPEN)) != 0U) +#endif /*ETH*/ +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ARTLPEN)) != 0U) +#endif /*DUAL_CORE*/ +#if defined(ETH) +#define __HAL_RCC_ETH1TX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1TXLPEN)) != 0U) +#define __HAL_RCC_ETH1RX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1RXLPEN)) != 0U) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB1OTGHSLPEN)) != 0U) +#define __HAL_RCC_USB1_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) != 0U) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB2OTGHSLPEN)) != 0U) +#define __HAL_RCC_USB2_OTG_FS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) != 0U) +#endif /* USB2_OTG_FS */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) == 0U) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) == 0U) +#define __HAL_RCC_ADC12_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ADC12LPEN)) == 0U) +#if defined(RCC_AHB1LPENR_CRCLPEN) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) == 0U) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1MACLPEN)) == 0U) +#endif /* ETH */ +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ARTLPEN)) == 0U) +#endif /*DUAL_CORE*/ +#if defined(ETH) +#define __HAL_RCC_ETH1TX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1TXLPEN)) == 0U) +#define __HAL_RCC_ETH1RX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1RXLPEN)) == 0U) +#endif /* ETH */ +#define __HAL_RCC_USB1_OTG_HS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB1OTGHSLPEN)) == 0U) +#define __HAL_RCC_USB1_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) == 0U) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB2OTGHSLPEN)) == 0U) +#define __HAL_RCC_USB2_OTG_FS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) == 0U) +#endif /* USB2_OTG_FS */ + + +/** @brief ENABLE or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMI_PSSILPEN)) +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() __HAL_RCC_DCMI_PSSI_CLK_SLEEP_ENABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_SDMMC2LPEN)) +#if defined(RCC_AHB2LPENR_DFSDMDMALPEN) +#define __HAL_RCC_DFSDMDMA_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DFSDMDMALPEN)) +#endif +#if defined(FMAC) +#define __HAL_RCC_FMAC_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_FMACLPEN)) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CORDICLPEN)) +#endif /* CORDIC */ +#if defined(RCC_AHB2LPENR_D2SRAM1LPEN) +#define __HAL_RCC_D2SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM1LPEN)) +#else +#define __HAL_RCC_AHBSRAM1_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AHBSRAM1LPEN)) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM2LPEN) +#define __HAL_RCC_D2SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM2LPEN)) +#else +#define __HAL_RCC_AHBSRAM2_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AHBSRAM2LPEN)) +#endif /* RCC_AHB2LPENR_D2SRAM2LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM3LPEN) +#define __HAL_RCC_D2SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM3LPEN)) +#endif + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMI_PSSILPEN)) +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() __HAL_RCC_DCMI_PSSI_CLK_SLEEP_DISABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMILPEN)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_SDMMC2LPEN)) +#if defined(RCC_AHB2LPENR_DFSDMDMALPEN) +#define __HAL_RCC_DFSDMDMA_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_DFSDMDMALPEN)) +#endif +#if defined(FMAC) +#define __HAL_RCC_FMAC_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_FMACLPEN)) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_CORDICLPEN)) +#endif /* CORDIC */ +#if defined(RCC_AHB2LPENR_D2SRAM1LPEN) +#define __HAL_RCC_D2SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM1LPEN)) +#else +#define __HAL_RCC_AHBSRAM1_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_AHBSRAM1LPEN)) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM2LPEN) +#define __HAL_RCC_D2SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM2LPEN)) +#else +#define __HAL_RCC_AHBSRAM2_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_AHBSRAM2LPEN)) +#endif /* RCC_AHB2LPENR_D2SRAM2LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM3LPEN) +#define __HAL_RCC_D2SRAM3_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM3LPEN)) +#endif + +/** @brief Get the enable or disable status of the AHB2 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMI_PSSILPEN)) != 0U) +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() __HAL_RCC_DCMI_PSSI_IS_CLK_SLEEP_ENABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) != 0U) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) != 0U) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) != 0U) +#endif /* HASH */ +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) != 0U) +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_SDMMC2LPEN)) != 0U) +#if defined(RCC_AHB2LPENR_DFSDMDMALPEN) +#define __HAL_RCC_DFSDMDMA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DFSDMDMALPEN)) != 0U) +#endif +#if defined(FMAC) +#define __HAL_RCC_FMAC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_FMACLPEN)) != 0U) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CORDICLPEN)) != 0U) +#endif /* CORDIC */ +#if defined(RCC_AHB2LPENR_D2SRAM1LPEN) +#define __HAL_RCC_D2SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM1LPEN)) != 0U) +#else +#define __HAL_RCC_AHBSRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AHBSRAM1LPEN)) != 0U) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM2LPEN) +#define __HAL_RCC_D2SRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM2LPEN)) != 0U) +#else +#define __HAL_RCC_AHBSRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AHBSRAM2LPEN)) != 0U) +#endif /* RCC_AHB2LPENR_D2SRAM2LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM3LPEN) +#define __HAL_RCC_D2SRAM3_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM3LPEN)) != 0U) +#endif /* RCC_AHB2LPENR_D2SRAM3LPEN */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMI_PSSILPEN)) == 0U) +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() __HAL_RCC_DCMI_PSSI_IS_CLK_SLEEP_DISABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) == 0U) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) == 0U) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) == 0U) +#endif /* HASH */ +#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) == 0U) +#if defined(RCC_AHB2LPENR_DFSDMDMALPEN) +#define __HAL_RCC_DFSDMDMA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DFSDMDMALPEN)) == 0U) +#endif +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_SDMMC2LPEN)) == 0U) +#if defined(FMAC) +#define __HAL_RCC_FMAC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_FMACLPEN)) == 0U) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CORDICLPEN)) == 0U) +#endif /* CORDIC */ +#if defined(RCC_AHB2LPENR_D2SRAM1LPEN) +#define __HAL_RCC_D2SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM1LPEN)) == 0U) +#else +#define __HAL_RCC_AHBSRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AHBSRAM1LPEN)) == 0U) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM2LPEN) +#define __HAL_RCC_D2SRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM2LPEN)) == 0U) +#else +#define __HAL_RCC_AHBSRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AHBSRAM2LPEN)) == 0U) +#endif /* RCC_AHB2LPENR_D2SRAM2LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM3LPEN) +#define __HAL_RCC_D2SRAM3_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM3LPEN)) == 0U) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN*/ + + +/** @brief ENABLE or disable the AHB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOHLPEN) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOILPEN) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOKLPEN) +#if defined(RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_CRCLPEN) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_BDMA2LPEN) +#define __HAL_RCC_BDMA_CLK_SLEEP_ENABLE __HAL_RCC_BDMA2_CLK_SLEEP_ENABLE /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_BDMALPEN) +#endif /* BDMA2 */ +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_ADC3LPEN) +#endif /* ADC3 */ +#define __HAL_RCC_BKPRAM_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_BKPRAMLPEN) +#if defined(RCC_AHB4LPENR_SRDSRAMLPEN) +#define __HAL_RCC_SRDSRAM_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR |= (RCC_AHB4LPENR_SRDSRAMLPEN)) +#define __HAL_RCC_D3SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRDSRAM_CLK_SLEEP_ENABLE /* for API backward compatibility*/ +#else +#define __HAL_RCC_D3SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR |= (RCC_AHB4LPENR_D3SRAM1LPEN)) +#endif /* RCC_AHB4LPENR_SRDSRAMLPEN */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOHLPEN) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOILPEN) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOKLPEN) +#if defined(RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_CRCLPEN) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMA2LPEN) +#define __HAL_RCC_BDMA_CLK_SLEEP_DISABLE __HAL_RCC_BDMA2_CLK_SLEEP_DISABLE /* For API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMALPEN) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_ADC3LPEN) +#endif /*ADC3*/ +#define __HAL_RCC_BKPRAM_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BKPRAMLPEN) +#if defined(RCC_AHB4LPENR_SRDSRAMLPEN) +#define __HAL_RCC_SRDSRAM_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR &= ~ (RCC_AHB4LPENR_SRDSRAMLPEN)) +#define __HAL_RCC_D3SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRDSRAM_CLK_SLEEP_DISABLE +#else +#define __HAL_RCC_D3SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR &= ~ (RCC_AHB4LPENR_D3SRAM1LPEN)) +#endif + + +/** @brief Get the enable or disable status of the AHB4 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOALPEN)) != 0U) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOBLPEN)) != 0U) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOCLPEN)) != 0U) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIODLPEN)) != 0U) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOELPEN)) != 0U) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOFLPEN)) != 0U) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOGLPEN)) != 0U) +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOHLPEN)) != 0U) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOILPEN)) != 0U) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOJLPEN)) != 0U) +#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOKLPEN)) != 0U) +#if defined(RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_CRCLPEN)) != 0U) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BDMA2LPEN)) != 0U) +#define __HAL_RCC_BDMA_IS_CLK_SLEEP_ENABLED __HAL_RCC_BDMA2_IS_CLK_SLEEP_ENABLED /* For API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BDMALPEN)) != 0U) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_ADC3LPEN)) != 0U) +#endif /*ADC3*/ +#define __HAL_RCC_BKPRAM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BKPRAMLPEN)) != 0U) +#if defined(RCC_AHB4LPENR_SRDSRAMLPEN) +#define __HAL_RCC_SRDSRAM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_SRDSRAMLPEN)) != 0U) +#define __HAL_RCC_D3SRAM1_IS_CLK_SLEEP_ENABLED __HAL_RCC_SRDSRAM_IS_CLK_SLEEP_ENABLED /* For API backward compatibility*/ +#else +#define __HAL_RCC_D3SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_D3SRAM1LPEN)) != 0U) +#endif + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOALPEN)) == 0U) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOBLPEN)) == 0U) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOCLPEN)) == 0U) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIODLPEN)) == 0U) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOELPEN)) == 0U) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOFLPEN)) == 0U) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOGLPEN)) == 0U) +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOHLPEN)) == 0U) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOILPEN)) == 0U) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOJLPEN)) == 0U) +#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOKLPEN)) == 0U) +#if defined(RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_CRCLPEN)) == 0U) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BDMA2LPEN)) == 0U) +#define __HAL_RCC_BDMA_IS_CLK_SLEEP_DISABLED __HAL_RCC_BDMA2_IS_CLK_SLEEP_DISABLED /* For API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BDMALPEN)) == 0U) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_ADC3LPEN)) == 0U) +#endif /*ADC3*/ +#define __HAL_RCC_BKPRAM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BKPRAMLPEN)) == 0U) +#if defined(RCC_AHB4LPENR_SRDSRAMLPEN) +#define __HAL_RCC_SRDSRAM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_SRDSRAMLPEN)) == 0U) +#define __HAL_RCC_D3SRAM1_IS_CLK_SLEEP_DISABLED __HAL_RCC_SRDSRAM_IS_CLK_SLEEP_DISABLED /* For API backward compatibility*/ +#else +#define __HAL_RCC_D3SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_D3SRAM1LPEN)) == 0U) +#endif + + +/** @brief ENABLE or disable the APB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB3LPENR) |= (RCC_APB3LPENR_LTDCLPEN) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB3LPENR) |= (RCC_APB3LPENR_DSILPEN) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE() (RCC->APB3LPENR) |= (RCC_APB3LPENR_WWDG1LPEN) + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB3LPENR) &= ~ (RCC_APB3LPENR_LTDCLPEN) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB3LPENR) &= ~ (RCC_APB3LPENR_DSILPEN) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE() (RCC->APB3LPENR) &= ~ (RCC_APB3LPENR_WWDG1LPEN) + + +/** @brief Get the enable or disable status of the APB3 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_LTDCLPEN)) != 0U) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_SLEEP_ENABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_DSILPEN)) != 0U) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_IS_CLK_SLEEP_ENABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_WWDG1LPEN)) != 0U) + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_LTDCLPEN)) == 0U) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_SLEEP_DISABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_DSILPEN)) == 0U) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_IS_CLK_SLEEP_DISABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_WWDG1LPEN)) == 0U) + + +/** @brief ENABLE or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_LPTIM1LPEN) + +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_WWDG2LPEN) +#endif /*DUAL_CORE*/ + +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C3LPEN) +#if defined(I2C5) +#define __HAL_RCC_I2C5_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C5LPEN) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_DAC12_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_MDIOS_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_FDCAN_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_FDCANLPEN) +#if defined(TIM23) +#define __HAL_RCC_TIM23_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_TIM23LPEN) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_TIM24LPEN) +#endif /* TIM24 */ + + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_LPTIM1LPEN) + +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_WWDG2LPEN) +#endif /*DUAL_CORE*/ + +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C3LPEN) +#if defined(I2C5) +#define __HAL_RCC_I2C5_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C5LPEN) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_DAC12_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_MDIOS_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_FDCAN_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_FDCANLPEN) +#if defined(TIM23) +#define __HAL_RCC_TIM23_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_TIM23LPEN) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_TIM24LPEN) +#endif /* TIM24 */ + + +/** @brief Get the enable or disable status of the APB1 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM2LPEN)) != 0U) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM3LPEN)) != 0U) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM4LPEN)) != 0U) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM5LPEN)) != 0U) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM6LPEN)) != 0U) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM7LPEN)) != 0U) +#define __HAL_RCC_TIM12_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM12LPEN)) != 0U) +#define __HAL_RCC_TIM13_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM13LPEN)) != 0U) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM14LPEN)) != 0U) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_LPTIM1LPEN)) != 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_WWDG2LPEN)) != 0U) +#endif /*DUAL_CORE*/ +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPI2LPEN)) != 0U) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPI3LPEN)) != 0U) +#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPDIFRXLPEN)) != 0U) +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_USART2LPEN)) != 0U) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_USART3LPEN)) != 0U) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART4LPEN)) != 0U) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART5LPEN)) != 0U) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C1LPEN)) != 0U) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C2LPEN)) != 0U) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C3LPEN)) != 0U) +#if defined(I2C5) +#define __HAL_RCC_I2C5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C5LPEN)) != 0U) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_CECLPEN)) != 0U) +#define __HAL_RCC_DAC12_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_DAC12LPEN)) != 0U) +#define __HAL_RCC_UART7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART7LPEN)) != 0U) +#define __HAL_RCC_UART8_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART8LPEN)) != 0U) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_CRSLPEN)) != 0U) +#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_SWPMILPEN)) != 0U) +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_OPAMPLPEN)) != 0U) +#define __HAL_RCC_MDIOS_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_MDIOSLPEN)) != 0U) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_FDCANLPEN)) != 0U) +#if defined(TIM23) +#define __HAL_RCC_TIM23_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_TIM23LPEN)) != 0U) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_TIM24LPEN)) != 0U) +#endif /* TIM24 */ + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM2LPEN)) == 0U) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM3LPEN)) == 0U) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM4LPEN)) == 0U) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM5LPEN)) == 0U) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM6LPEN)) == 0U) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM7LPEN)) == 0U) +#define __HAL_RCC_TIM12_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM12LPEN)) == 0U) +#define __HAL_RCC_TIM13_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM13LPEN)) == 0U) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM14LPEN)) == 0U) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_LPTIM1LPEN)) == 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_WWDG2LPEN)) == 0U) +#endif /*DUAL_CORE*/ +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPI2LPEN)) == 0U) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPI3LPEN)) == 0U) +#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPDIFRXLPEN)) == 0U) +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_USART2LPEN)) == 0U) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_USART3LPEN)) == 0U) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART4LPEN)) == 0U) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART5LPEN)) == 0U) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C1LPEN)) == 0U) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C2LPEN)) == 0U) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C3LPEN)) == 0U) +#if defined(I2C5) +#define __HAL_RCC_I2C5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C5LPEN)) == 0U) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_CECLPEN)) == 0U) +#define __HAL_RCC_DAC12_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_DAC12LPEN)) == 0U) +#define __HAL_RCC_UART7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART7LPEN)) == 0U) +#define __HAL_RCC_UART8_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART8LPEN)) == 0U) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_CRSLPEN)) == 0U) +#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_SWPMILPEN)) == 0U) +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_OPAMPLPEN)) == 0U) +#define __HAL_RCC_MDIOS_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_MDIOSLPEN)) == 0U) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_FDCANLPEN)) == 0U) +#if defined(TIM23) +#define __HAL_RCC_TIM23_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_TIM23LPEN)) == 0U) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_TIM24LPEN)) == 0U) +#endif /* TIM24 */ + + +/** @brief ENABLE or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_USART6LPEN) +#if defined(UART9) +#define __HAL_RCC_UART9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_UART9LPEN) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_USART10LPEN) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI1LPEN) +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI2LPEN) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI3LPEN) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_DFSDM1LPEN) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_HRTIMLPEN) +#endif /*HRTIM1*/ + +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_USART6LPEN) +#if defined(UART9) +#define __HAL_RCC_UART9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_UART9LPEN) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_USART10LPEN) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI1LPEN) +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI2LPEN) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI3LPEN) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_DFSDM1LPEN) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_HRTIMLPEN) +#endif /*HRTIM1*/ + + +/** @brief Get the enable or disable status of the APB2 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) != 0U) +#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) != 0U) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) != 0U) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) != 0U) +#if defined(UART9) +#define __HAL_RCC_UART9_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_UART9LPEN)) != 0U) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART10LPEN)) != 0U) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) != 0U) +#define __HAL_RCC_SPI4_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) != 0U) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM15LPEN)) != 0U) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM16LPEN)) != 0U) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM17LPEN)) != 0U) +#define __HAL_RCC_SPI5_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) != 0U) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) != 0U) +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) != 0U) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI3LPEN)) != 0U) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) != 0U) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_HRTIMLPEN)) != 0U) +#endif /*HRTIM1*/ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) == 0U) +#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) == 0U) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) == 0U) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) == 0U) +#if defined(UART9) +#define __HAL_RCC_USART9_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART9LPEN)) == 0U) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART10LPEN)) == 0U) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) == 0U) +#define __HAL_RCC_SPI4_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) == 0U) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM15LPEN)) == 0U) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM16LPEN)) == 0U) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM17LPEN)) == 0U) +#define __HAL_RCC_SPI5_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) == 0U) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) == 0U) +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) == 0U) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI3LPEN)) == 0U) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) == 0U) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_HRTIMLPEN)) == 0U) +#endif /*HRTIM1*/ + +/** @brief ENABLE or disable the APB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_LPTIM3_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM3LPEN) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM4LPEN) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM5LPEN) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_DAC2LPEN) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_VREF_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_RTC_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_RTCAPBLPEN) +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_SAI4LPEN) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_DTSLPEN) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_DFSDM2LPEN) +#endif /*DFSDM2*/ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_LPTIM3_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM3LPEN) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM4LPEN) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM5LPEN) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_DAC2LPEN) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_VREF_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_RTC_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_RTCAPBLPEN) +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SAI4LPEN) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_DTSLPEN) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_DFSDM2LPEN) +#endif /*DFSDM2*/ + + +/** @brief Get the enable or disable status of the APB4 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SYSCFGLPEN)) != 0U) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPUART1LPEN)) != 0U) +#define __HAL_RCC_SPI6_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SPI6LPEN)) != 0U) +#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_I2C4LPEN)) != 0U) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM2LPEN)) != 0U) +#define __HAL_RCC_LPTIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM3LPEN)) != 0U) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM4LPEN)) != 0U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM5LPEN)) != 0U) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DAC2LPEN)) != 0U) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_COMP12LPEN)) != 0U) +#define __HAL_RCC_VREF_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_VREFLPEN)) != 0U) +#define __HAL_RCC_RTC_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_RTCAPBLPEN)) != 0U) +#if defined(SAI4) +#define __HAL_RCC_SAI4_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SAI4LPEN)) != 0U) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DTSLPEN)) != 0U) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DFSDM2LPEN)) != 0U) +#endif /*DFSDM2*/ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SYSCFGLPEN)) == 0U) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPUART1LPEN)) == 0U) +#define __HAL_RCC_SPI6_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SPI6LPEN)) == 0U) +#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_I2C4LPEN)) == 0U) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM2LPEN)) == 0U) +#define __HAL_RCC_LPTIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM3LPEN)) == 0U) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM4LPEN)) == 0U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM5LPEN)) == 0U) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DAC2LPEN)) == 0U) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_COMP12LPEN)) == 0U) +#define __HAL_RCC_VREF_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_VREFLPEN)) == 0U) +#define __HAL_RCC_RTC_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_RTCAPBLPEN)) == 0U) +#if defined(SAI4) +#define __HAL_RCC_SAI4_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SAI4LPEN)) == 0U) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DTSLPEN)) == 0U) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DFSDM2LPEN)) == 0U) +#endif /*DFSDM2*/ + + +#if defined(DUAL_CORE) + +/** @brief Enable or disable the RCC_C1 AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ +#define __HAL_RCC_C1_MDMA_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_C1_DMA2D_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_DMA2DLPEN)) +#define __HAL_RCC_C1_JPGDEC_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_JPGDECLPEN)) +#define __HAL_RCC_C1_FLASH_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_C1_FMC_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_C1_QSPI_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_C1_SDMMC1_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_SDMMC1LPEN)) +#define __HAL_RCC_C1_DTCM1_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_C1_DTCM2_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_C1_ITCM_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_ITCMLPEN)) +#define __HAL_RCC_C1_D1SRAM1_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAMLPEN)) + + +#define __HAL_RCC_C1_MDMA_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_C1_DMA2D_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_DMA2DLPEN)) +#define __HAL_RCC_C1_JPGDEC_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_JPGDECLPEN)) +#define __HAL_RCC_C1_FLASH_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_C1_FMC_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_C1_QSPI_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_C1_SDMMC1_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_SDMMC1LPEN)) +#define __HAL_RCC_C1_DTCM1_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_C1_DTCM2_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_C1_ITCM_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_ITCMLPEN)) +#define __HAL_RCC_C1_D1SRAM1_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAMLPEN)) + + + +/** @brief ENABLE or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_DMA1_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_C1_DMA2_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_C1_ADC12_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_ADC12LPEN)) +#define __HAL_RCC_C1_ETH1MAC_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_ETH1MACLPEN)) +#define __HAL_RCC_C1_ETH1TX_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_C1_ETH1RX_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_ETH1RXLPEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) + +#define __HAL_RCC_C1_DMA1_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_C1_DMA2_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_C1_ADC12_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_ADC12LPEN)) +#define __HAL_RCC_C1_ETH1MAC_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1MACLPEN)) +#define __HAL_RCC_C1_ETH1TX_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_C1_ETH1RX_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1RXLPEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) + +/** @brief ENABLE or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_DCMI_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#if defined(CRYP) +#define __HAL_RCC_C1_CRYP_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C1_HASH_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_C1_RNG_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_C1_SDMMC2_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_SDMMC2LPEN)) +#define __HAL_RCC_C1_D2SRAM1_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM1LPEN)) +#define __HAL_RCC_C1_D2SRAM2_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM2LPEN)) +#define __HAL_RCC_C1_D2SRAM3_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM3LPEN)) + +#define __HAL_RCC_C1_DCMI_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMILPEN)) +#if defined(CRYP) +#define __HAL_RCC_C1_CRYP_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C1_HASH_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_C1_RNG_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_C1_SDMMC2_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_SDMMC2LPEN)) +#define __HAL_RCC_C1_D2SRAM1_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM1LPEN)) +#define __HAL_RCC_C1_D2SRAM2_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM2LPEN)) +#define __HAL_RCC_C1_D2SRAM3_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM3LPEN)) + +/** @brief ENABLE or disable the AHB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_GPIOA_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_C1_GPIOB_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_C1_GPIOC_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_C1_GPIOD_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_C1_GPIOE_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_C1_GPIOF_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_C1_GPIOG_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_C1_GPIOH_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOHLPEN) +#define __HAL_RCC_C1_GPIOI_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOILPEN) +#define __HAL_RCC_C1_GPIOJ_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_C1_GPIOK_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOKLPEN) +#define __HAL_RCC_C1_CRC_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_C1_BDMA_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_BDMALPEN) +#define __HAL_RCC_C1_ADC3_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_ADC3LPEN) +#define __HAL_RCC_C1_BKPRAM_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_BKPRAMLPEN) +#define __HAL_RCC_C1_D3SRAM1_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR |= (RCC_AHB4LPENR_D3SRAM1LPEN)) + +#define __HAL_RCC_C1_GPIOA_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_C1_GPIOB_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_C1_GPIOC_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_C1_GPIOD_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_C1_GPIOE_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_C1_GPIOF_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_C1_GPIOG_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_C1_GPIOH_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOHLPEN) +#define __HAL_RCC_C1_GPIOI_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOILPEN) +#define __HAL_RCC_C1_GPIOJ_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_C1_GPIOK_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOKLPEN) +#define __HAL_RCC_C1_CRC_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_C1_BDMA_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMALPEN) +#define __HAL_RCC_C1_ADC3_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_ADC3LPEN) +#define __HAL_RCC_C1_BKPRAM_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BKPRAMLPEN) +#define __HAL_RCC_C1_D3SRAM1_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR &= ~ (RCC_AHB4LPENR_D3SRAM1LPEN)) + +/** @brief ENABLE or disable the APB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_LTDC_CLK_SLEEP_ENABLE() (RCC_C1->APB3LPENR) |= (RCC_APB3LPENR_LTDCLPEN) +#define __HAL_RCC_C1_DSI_CLK_SLEEP_ENABLE() (RCC_C1->APB3LPENR) |= (RCC_APB3LPENR_DSILPEN) +#define __HAL_RCC_C1_WWDG1_CLK_SLEEP_ENABLE() (RCC_C1->APB3LPENR) |= (RCC_APB3LPENR_WWDG1LPEN) + +#define __HAL_RCC_C1_LTDC_CLK_SLEEP_DISABLE() (RCC_C1->APB3LPENR) &= ~ (RCC_APB3LPENR_LTDCLPEN) +#define __HAL_RCC_C1_DSI_CLK_SLEEP_DISABLE() (RCC_C1->APB3LPENR) &= ~ (RCC_APB3LPENR_DSILPEN) +#define __HAL_RCC_C1_WWDG1_CLK_SLEEP_DISABLE() (RCC_C1->APB3LPENR) &= ~ (RCC_APB3LPENR_WWDG1LPEN) + +/** @brief ENABLE or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_TIM2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_C1_TIM3_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_C1_TIM4_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_C1_TIM5_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_C1_TIM6_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_C1_TIM7_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_C1_TIM12_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_C1_TIM13_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_C1_TIM14_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_C1_LPTIM1_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_LPTIM1LPEN) +#define __HAL_RCC_C1_WWDG2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_WWDG2LPEN) +#define __HAL_RCC_C1_SPI2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_C1_SPI3_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_C1_SPDIFRX_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_C1_USART2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_C1_USART3_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_C1_UART4_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_C1_UART5_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_C1_I2C1_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_C1_I2C2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_C1_I2C3_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_I2C3LPEN) +#define __HAL_RCC_C1_CEC_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_C1_DAC12_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_C1_UART7_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_C1_UART8_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_C1_CRS_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_C1_SWPMI_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_C1_OPAMP_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_C1_MDIOS_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_C1_FDCAN_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_FDCANLPEN) + + +#define __HAL_RCC_C1_TIM2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_C1_TIM3_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_C1_TIM4_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_C1_TIM5_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_C1_TIM6_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_C1_TIM7_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_C1_TIM12_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_C1_TIM13_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_C1_TIM14_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_C1_LPTIM1_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_LPTIM1LPEN) +#define __HAL_RCC_C1_WWDG2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_WWDG2LPEN) +#define __HAL_RCC_C1_SPI2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_C1_SPI3_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_C1_SPDIFRX_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_C1_USART2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_C1_USART3_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_C1_UART4_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_C1_UART5_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_C1_I2C1_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_C1_I2C2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_C1_I2C3_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C3LPEN) +#define __HAL_RCC_C1_CEC_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_C1_DAC12_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_C1_UART7_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_C1_UART8_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_C1_CRS_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_C1_SWPMI_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_C1_OPAMP_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_C1_MDIOS_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_C1_FDCAN_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_FDCANLPEN) + +/** @brief ENABLE or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_TIM1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_C1_TIM8_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_C1_USART1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_C1_USART6_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_USART6LPEN) +#define __HAL_RCC_C1_SPI1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_C1_SPI4_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_C1_TIM15_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_C1_TIM16_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_C1_TIM17_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_C1_SPI5_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_C1_SAI1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SAI1LPEN) +#define __HAL_RCC_C1_SAI2_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SAI2LPEN) +#define __HAL_RCC_C1_SAI3_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SAI3LPEN) +#define __HAL_RCC_C1_DFSDM1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_DFSDM1LPEN) +#define __HAL_RCC_C1_HRTIM1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_HRTIMLPEN) + +#define __HAL_RCC_C1_TIM1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_C1_TIM8_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_C1_USART1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_C1_USART6_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_USART6LPEN) +#define __HAL_RCC_C1_SPI1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_C1_SPI4_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_C1_TIM15_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_C1_TIM16_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_C1_TIM17_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_C1_SPI5_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_C1_SAI1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI1LPEN) +#define __HAL_RCC_C1_SAI2_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI2LPEN) +#define __HAL_RCC_C1_SAI3_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI3LPEN) +#define __HAL_RCC_C1_DFSDM1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_DFSDM1LPEN) +#define __HAL_RCC_C1_HRTIM1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_HRTIMLPEN) + +/** @brief ENABLE or disable the APB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_SYSCFG_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_C1_LPUART1_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_C1_SPI6_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_C1_I2C4_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_C1_LPTIM2_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_C1_LPTIM3_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPTIM3LPEN) +#define __HAL_RCC_C1_LPTIM4_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPTIM4LPEN) +#define __HAL_RCC_C1_LPTIM5_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPTIM5LPEN) +#define __HAL_RCC_C1_COMP12_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_C1_VREF_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_C1_SAI4_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_SAI4LPEN) +#define __HAL_RCC_C1_RTC_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_RTCAPBLPEN) + + +#define __HAL_RCC_C1_SYSCFG_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_C1_LPUART1_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_C1_SPI6_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_C1_I2C4_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_C1_LPTIM2_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_C1_LPTIM3_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM3LPEN) +#define __HAL_RCC_C1_LPTIM4_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM4LPEN) +#define __HAL_RCC_C1_LPTIM5_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM5LPEN) +#define __HAL_RCC_C1_COMP12_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_C1_VREF_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_C1_SAI4_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_SAI4LPEN) +#define __HAL_RCC_C1_RTC_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_RTCAPBLPEN) + +/** @brief Enable or disable the RCC_C2 AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + + +#define __HAL_RCC_C2_MDMA_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_C2_DMA2D_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_DMA2DLPEN)) +#define __HAL_RCC_C2_JPGDEC_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_JPGDECLPEN)) +#define __HAL_RCC_C2_FLASH_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_C2_FMC_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_C2_QSPI_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_C2_SDMMC1_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_SDMMC1LPEN)) +#define __HAL_RCC_C2_DTCM1_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_C2_DTCM2_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_C2_ITCM_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_ITCMLPEN)) +#define __HAL_RCC_C2_D1SRAM1_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAMLPEN)) + + +#define __HAL_RCC_C2_MDMA_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_C2_DMA2D_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_DMA2DLPEN)) +#define __HAL_RCC_C2_JPGDEC_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_JPGDECLPEN)) +#define __HAL_RCC_C2_FLASH_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_C2_FMC_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_C2_QSPI_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_C2_SDMMC1_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_SDMMC1LPEN)) +#define __HAL_RCC_C2_DTCM1_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_C2_DTCM2_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_C2_ITCM_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_ITCMLPEN)) +#define __HAL_RCC_C2_D1SRAM1_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAMLPEN)) + + + +/** @brief ENABLE or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_DMA1_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_C2_DMA2_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_C2_ADC12_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_ADC12LPEN)) +#define __HAL_RCC_C2_ETH1MAC_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_ETH1MACLPEN)) +#define __HAL_RCC_C2_ETH1TX_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_C2_ETH1RX_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_ETH1RXLPEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) + +#define __HAL_RCC_C2_DMA1_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_C2_DMA2_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_C2_ADC12_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_ADC12LPEN)) +#define __HAL_RCC_C2_ETH1MAC_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1MACLPEN)) +#define __HAL_RCC_C2_ETH1TX_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_C2_ETH1RX_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1RXLPEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) + +/** @brief ENABLE or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_DCMI_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#if defined(CRYP) +#define __HAL_RCC_C2_CRYP_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C2_HASH_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_C2_RNG_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_C2_SDMMC2_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_SDMMC2LPEN)) +#define __HAL_RCC_C2_D2SRAM1_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM1LPEN)) +#define __HAL_RCC_C2_D2SRAM2_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM2LPEN)) +#define __HAL_RCC_C2_D2SRAM3_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM3LPEN)) + +#define __HAL_RCC_C2_DCMI_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMILPEN)) +#if defined(CRYP) +#define __HAL_RCC_C2_CRYP_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C2_HASH_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_C2_RNG_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_C2_SDMMC2_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_SDMMC2LPEN)) +#define __HAL_RCC_C2_D2SRAM1_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM1LPEN)) +#define __HAL_RCC_C2_D2SRAM2_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM2LPEN)) +#define __HAL_RCC_C2_D2SRAM3_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM3LPEN)) + +/** @brief ENABLE or disable the AHB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_GPIOA_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_C2_GPIOB_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_C2_GPIOC_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_C2_GPIOD_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_C2_GPIOE_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_C2_GPIOF_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_C2_GPIOG_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_C2_GPIOH_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOHLPEN) +#define __HAL_RCC_C2_GPIOI_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOILPEN) +#define __HAL_RCC_C2_GPIOJ_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_C2_GPIOK_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOKLPEN) +#define __HAL_RCC_C2_CRC_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_C2_BDMA_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_BDMALPEN) +#define __HAL_RCC_C2_ADC3_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_ADC3LPEN) +#define __HAL_RCC_C2_BKPRAM_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_BKPRAMLPEN) +#define __HAL_RCC_C2_D3SRAM1_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR |= (RCC_AHB4LPENR_D3SRAM1LPEN)) + +#define __HAL_RCC_C2_GPIOA_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_C2_GPIOB_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_C2_GPIOC_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_C2_GPIOD_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_C2_GPIOE_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_C2_GPIOF_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_C2_GPIOG_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_C2_GPIOH_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOHLPEN) +#define __HAL_RCC_C2_GPIOI_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOILPEN) +#define __HAL_RCC_C2_GPIOJ_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_C2_GPIOK_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOKLPEN) +#define __HAL_RCC_C2_CRC_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_C2_BDMA_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMALPEN) +#define __HAL_RCC_C2_ADC3_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_ADC3LPEN) +#define __HAL_RCC_C2_BKPRAM_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BKPRAMLPEN) +#define __HAL_RCC_C2_D3SRAM1_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR &= ~ (RCC_AHB4LPENR_D3SRAM1LPEN)) + +/** @brief ENABLE or disable the APB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_LTDC_CLK_SLEEP_ENABLE() (RCC_C2->APB3LPENR) |= (RCC_APB3LPENR_LTDCLPEN) +#define __HAL_RCC_C2_DSI_CLK_SLEEP_ENABLE() (RCC_C2->APB3LPENR) |= (RCC_APB3LPENR_DSILPEN) +#define __HAL_RCC_C2_WWDG1_CLK_SLEEP_ENABLE() (RCC_C2->APB3LPENR) |= (RCC_APB3LPENR_WWDG1LPEN) + +#define __HAL_RCC_C2_LTDC_CLK_SLEEP_DISABLE() (RCC_C2->APB3LPENR) &= ~ (RCC_APB3LPENR_LTDCLPEN) +#define __HAL_RCC_C2_DSI_CLK_SLEEP_DISABLE() (RCC_C2->APB3LPENR) &= ~ (RCC_APB3LPENR_DSILPEN) +#define __HAL_RCC_C2_WWDG1_CLK_SLEEP_DISABLE() (RCC_C2->APB3LPENR) &= ~ (RCC_APB3LPENR_WWDG1LPEN) + +/** @brief ENABLE or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_TIM2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_C2_TIM3_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_C2_TIM4_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_C2_TIM5_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_C2_TIM6_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_C2_TIM7_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_C2_TIM12_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_C2_TIM13_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_C2_TIM14_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_C2_LPTIM1_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_LPTIM1LPEN) +#define __HAL_RCC_C2_WWDG2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_WWDG2LPEN) +#define __HAL_RCC_C2_SPI2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_C2_SPI3_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_C2_SPDIFRX_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_C2_USART2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_C2_USART3_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_C2_UART4_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_C2_UART5_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_C2_I2C1_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_C2_I2C2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_C2_I2C3_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_I2C3LPEN) +#define __HAL_RCC_C2_CEC_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_C2_DAC12_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_C2_UART7_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_C2_UART8_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_C2_CRS_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_C2_SWPMI_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_C2_OPAMP_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_C2_MDIOS_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_C2_FDCAN_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_FDCANLPEN) + + +#define __HAL_RCC_C2_TIM2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_C2_TIM3_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_C2_TIM4_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_C2_TIM5_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_C2_TIM6_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_C2_TIM7_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_C2_TIM12_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_C2_TIM13_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_C2_TIM14_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_C2_LPTIM1_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_LPTIM1LPEN) +#define __HAL_RCC_C2_WWDG2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_WWDG2LPEN) +#define __HAL_RCC_C2_SPI2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_C2_SPI3_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_C2_SPDIFRX_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_C2_USART2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_C2_USART3_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_C2_UART4_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_C2_UART5_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_C2_I2C1_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_C2_I2C2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_C2_I2C3_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C3LPEN) +#define __HAL_RCC_C2_CEC_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_C2_DAC12_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_C2_UART7_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_C2_UART8_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_C2_CRS_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_C2_SWPMI_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_C2_OPAMP_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_C2_MDIOS_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_C2_FDCAN_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_FDCANLPEN) + +/** @brief ENABLE or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_TIM1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_C2_TIM8_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_C2_USART1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_C2_USART6_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_USART6LPEN) +#define __HAL_RCC_C2_SPI1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_C2_SPI4_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_C2_TIM15_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_C2_TIM16_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_C2_TIM17_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_C2_SPI5_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_C2_SAI1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SAI1LPEN) +#define __HAL_RCC_C2_SAI2_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SAI2LPEN) +#define __HAL_RCC_C2_SAI3_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SAI3LPEN) +#define __HAL_RCC_C2_DFSDM1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_DFSDM1LPEN) +#define __HAL_RCC_C2_HRTIM1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_HRTIMLPEN) + +#define __HAL_RCC_C2_TIM1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_C2_TIM8_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_C2_USART1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_C2_USART6_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_USART6LPEN) +#define __HAL_RCC_C2_SPI1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_C2_SPI4_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_C2_TIM15_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_C2_TIM16_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_C2_TIM17_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_C2_SPI5_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_C2_SAI1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI1LPEN) +#define __HAL_RCC_C2_SAI2_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI2LPEN) +#define __HAL_RCC_C2_SAI3_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI3LPEN) +#define __HAL_RCC_C2_DFSDM1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_DFSDM1LPEN) +#define __HAL_RCC_C2_HRTIM1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_HRTIMLPEN) + +/** @brief ENABLE or disable the APB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_SYSCFG_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_C2_LPUART1_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_C2_SPI6_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_C2_I2C4_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_C2_LPTIM2_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_C2_LPTIM3_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPTIM3LPEN) +#define __HAL_RCC_C2_LPTIM4_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPTIM4LPEN) +#define __HAL_RCC_C2_LPTIM5_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPTIM5LPEN) +#define __HAL_RCC_C2_COMP12_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_C2_VREF_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_C2_SAI4_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_SAI4LPEN) +#define __HAL_RCC_C2_RTC_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_RTCAPBLPEN) + +#define __HAL_RCC_C2_SYSCFG_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_C2_LPUART1_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_C2_SPI6_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_C2_I2C4_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_C2_LPTIM2_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_C2_LPTIM3_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM3LPEN) +#define __HAL_RCC_C2_LPTIM4_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM4LPEN) +#define __HAL_RCC_C2_LPTIM5_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM5LPEN) +#define __HAL_RCC_C2_COMP12_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_C2_VREF_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_C2_SAI4_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_SAI4LPEN) +#define __HAL_RCC_C2_RTC_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_RTCAPBLPEN) + +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +/** @brief Enable or disable peripheral bus clock when D3 domain is in DRUN + * @note After reset (default config), peripheral clock is disabled when both CPUs are in CSTOP + */ +#else +/** @brief Enable or disable peripheral bus clock when D3 domain is in DRUN + * @note After reset (default config), peripheral clock is disabled when CPU is in CSTOP + */ +#endif /*DUAL_CORE*/ + +#if defined(RCC_D3AMR_BDMAAMEN) +#define __HAL_RCC_BDMA_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_BDMAAMEN) +#endif +#if defined(RCC_D3AMR_LPUART1AMEN) +#define __HAL_RCC_LPUART1_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPUART1AMEN) +#endif +#if defined(RCC_D3AMR_SPI6AMEN) +#define __HAL_RCC_SPI6_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_SPI6AMEN) +#endif +#if defined(RCC_D3AMR_I2C4AMEN) +#define __HAL_RCC_I2C4_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_I2C4AMEN) +#endif +#if defined(RCC_D3AMR_LPTIM2AMEN) +#define __HAL_RCC_LPTIM2_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPTIM2AMEN) +#endif +#if defined(RCC_D3AMR_LPTIM3AMEN) +#define __HAL_RCC_LPTIM3_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPTIM3AMEN) +#endif +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPTIM4AMEN) +#endif +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPTIM5AMEN) +#endif +#if defined(RCC_D3AMR_COMP12AMEN) +#define __HAL_RCC_COMP12_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_COMP12AMEN) +#endif +#if defined(RCC_D3AMR_VREFAMEN) +#define __HAL_RCC_VREF_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_VREFAMEN) +#endif +#if defined(RCC_D3AMR_RTCAMEN) +#define __HAL_RCC_RTC_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_RTCAMEN) +#endif +#if defined(RCC_D3AMR_CRCAMEN) +#define __HAL_RCC_CRC_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_CRCAMEN) +#endif +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_SAI4AMEN) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_ADC3AMEN) +#endif +#if defined(RCC_D3AMR_DTSAMEN) +#define __HAL_RCC_DTS_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_DTSAMEN) +#endif +#if defined(RCC_D3AMR_BKPRAMAMEN) +#define __HAL_RCC_BKPRAM_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_BKPRAMAMEN) +#endif +#if defined(RCC_D3AMR_SRAM4AMEN) +#define __HAL_RCC_D3SRAM1_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_SRAM4AMEN) +#endif + +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_BDMA2AMEN) +#endif +#if defined(RCC_SRDAMR_GPIOAMEN) +#define __HAL_RCC_GPIO_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_GPIOAMEN) +#endif +#if defined(RCC_SRDAMR_LPUART1AMEN) +#define __HAL_RCC_LPUART1_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_LPUART1AMEN) +#endif +#if defined(RCC_SRDAMR_SPI6AMEN) +#define __HAL_RCC_SPI6_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_SPI6AMEN) +#endif +#if defined(RCC_SRDAMR_I2C4AMEN) +#define __HAL_RCC_I2C4_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_I2C4AMEN) +#endif +#if defined(RCC_SRDAMR_LPTIM2AMEN) +#define __HAL_RCC_LPTIM2_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_LPTIM2AMEN) +#endif +#if defined(RCC_SRDAMR_LPTIM3AMEN) +#define __HAL_RCC_LPTIM3_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_LPTIM3AMEN) +#endif +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_DAC2AMEN) +#endif +#if defined(RCC_SRDAMR_COMP12AMEN) +#define __HAL_RCC_COMP12_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_COMP12AMEN) +#endif +#if defined(RCC_SRDAMR_VREFAMEN) +#define __HAL_RCC_VREF_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_VREFAMEN) +#endif +#if defined(RCC_SRDAMR_RTCAMEN) +#define __HAL_RCC_RTC_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_RTCAMEN) +#endif +#if defined(RCC_SRDAMR_DTSAMEN) +#define __HAL_RCC_DTS_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_DTSAMEN) +#endif +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_DFSDM2AMEN) +#endif +#if defined(RCC_SRDAMR_BKPRAMAMEN) +#define __HAL_RCC_BKPRAM_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_BKPRAMAMEN) +#endif +#if defined(RCC_SRDAMR_SRDSRAMAMEN) +#define __HAL_RCC_SRDSRAM_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_SRDSRAMAMEN) +#endif + +#if defined(RCC_D3AMR_BDMAAMEN) +#define __HAL_RCC_BDMA_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_BDMAAMEN) +#endif +#if defined(RCC_D3AMR_LPUART1AMEN) +#define __HAL_RCC_LPUART1_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPUART1AMEN) +#endif +#if defined(RCC_D3AMR_SPI6AMEN) +#define __HAL_RCC_SPI6_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_SPI6AMEN) +#endif +#if defined(RCC_D3AMR_I2C4AMEN) +#define __HAL_RCC_I2C4_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_I2C4AMEN) +#endif +#if defined(RCC_D3AMR_LPTIM2AMEN) +#define __HAL_RCC_LPTIM2_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM2AMEN) +#endif +#if defined(RCC_D3AMR_LPTIM3AMEN) +#define __HAL_RCC_LPTIM3_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM3AMEN) +#endif +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM4AMEN) +#endif +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM5AMEN) +#endif +#if defined(RCC_D3AMR_COMP12AMEN) +#define __HAL_RCC_COMP12_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_COMP12AMEN) +#endif +#if defined(RCC_D3AMR_VREFAMEN) +#define __HAL_RCC_VREF_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_VREFAMEN) +#endif +#if defined(RCC_D3AMR_RTCAMEN) +#define __HAL_RCC_RTC_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_RTCAMEN) +#endif +#if defined(RCC_D3AMR_CRCAMEN) +#define __HAL_RCC_CRC_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_CRCAMEN) +#endif +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_SAI4AMEN) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_ADC3AMEN) +#endif +#if defined(RCC_D3AMR_DTSAMEN) +#define __HAL_RCC_DTS_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_DTSAMEN) +#endif +#if defined(RCC_D3AMR_BKPRAMAMEN) +#define __HAL_RCC_BKPRAM_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_BKPRAMAMEN) +#endif +#if defined(RCC_D3AMR_SRAM4AMEN) +#define __HAL_RCC_D3SRAM1_CLKAM_DISABLE() (RCC->D3AMR)&= ~ (RCC_D3AMR_SRAM4AMEN) +#endif + +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_BDMA2AMEN) +#endif +#if defined(RCC_SRDAMR_GPIOAMEN) +#define __HAL_RCC_GPIO_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_GPIOAMEN) +#endif +#if defined(RCC_SRDAMR_LPUART1AMEN) +#define __HAL_RCC_LPUART1_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_LPUART1AMEN) +#endif +#if defined(RCC_SRDAMR_SPI6AMEN) +#define __HAL_RCC_SPI6_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_SPI6AMEN) +#endif +#if defined(RCC_SRDAMR_I2C4AMEN) +#define __HAL_RCC_I2C4_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_I2C4AMEN) +#endif +#if defined(RCC_SRDAMR_LPTIM2AMEN) +#define __HAL_RCC_LPTIM2_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_LPTIM2AMEN) +#endif +#if defined(RCC_SRDAMR_LPTIM3AMEN) +#define __HAL_RCC_LPTIM3_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_LPTIM3AMEN) +#endif +#if defined(RCC_SRDAMR_DAC2AMEN) +#define __HAL_RCC_DAC2_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_DAC2AMEN) +#endif +#if defined(RCC_SRDAMR_COMP12AMEN) +#define __HAL_RCC_COMP12_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_COMP12AMEN) +#endif +#if defined(RCC_SRDAMR_VREFAMEN) +#define __HAL_RCC_VREF_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_VREFAMEN) +#endif +#if defined(RCC_SRDAMR_RTCAMEN) +#define __HAL_RCC_RTC_CLKAM_DISABLE() (RCC->SRDAMR) &= ~(RCC_SRDAMR_RTCAMEN) +#endif +#if defined(RCC_SRDAMR_DTSAMEN) +#define __HAL_RCC_DTS_CLKAM_DISABLE() (RCC->SRDAMR) &= ~(RCC_SRDAMR_DTSAMEN) +#endif +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLKAM_DISABLE() (RCC->SRDAMR) &= ~(RCC_SRDAMR_DFSDM2AMEN) +#endif +#if defined(RCC_SRDAMR_BKPRAMAMEN) +#define __HAL_RCC_BKPRAM_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_BKPRAMAMEN) +#endif +#if defined(RCC_SRDAMR_SRDSRAMAMEN) +#define __HAL_RCC_SRDSRAM_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_SRDSRAMAMEN) +#endif + + +#if defined(RCC_CKGAENR_AXICKG) +/** @brief Macro to enable or disable the RCC_CKGAENR bits (AXI clocks gating enable register). + */ + +#define __HAL_RCC_AXI_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AXICKG) +#define __HAL_RCC_AHB_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AHBCKG) +#define __HAL_RCC_CPU_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_CPUCKG) +#define __HAL_RCC_SDMMC_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_SDMMCCKG) +#define __HAL_RCC_MDMA_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_MDMACKG) +#define __HAL_RCC_DMA2D_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_DMA2DCKG) +#define __HAL_RCC_LTDC_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_LTDCCKG) +#define __HAL_RCC_GFXMMUM_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_GFXMMUMCKG) +#define __HAL_RCC_AHB12_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AHB12CKG) +#define __HAL_RCC_AHB34_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AHB34CKG) +#define __HAL_RCC_FLIFT_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_FLIFTCKG) +#define __HAL_RCC_OCTOSPI2_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_OCTOSPI2CKG) +#define __HAL_RCC_FMC_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_FMCCKG) +#define __HAL_RCC_OCTOSPI1_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_OCTOSPI1CKG) +#define __HAL_RCC_AXIRAM1_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AXIRAM1CKG) +#define __HAL_RCC_AXIRAM2_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AXIRAM2CKG) +#define __HAL_RCC_AXIRAM3_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AXIRAM3CKG) +#define __HAL_RCC_GFXMMUS_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_GFXMMUSCKG) +#define __HAL_RCC_ECCRAM_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_ECCRAMCKG) +#define __HAL_RCC_EXTI_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_EXTICKG) +#define __HAL_RCC_JTAG_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_JTAGCKG) + + +#define __HAL_RCC_AXI_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AXICKG) +#define __HAL_RCC_AHB_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AHBCKG) +#define __HAL_RCC_CPU_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_CPUCKG) +#define __HAL_RCC_SDMMC_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_SDMMCCKG) +#define __HAL_RCC_MDMA_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_MDMACKG) +#define __HAL_RCC_DMA2D_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_DMA2DCKG) +#define __HAL_RCC_LTDC_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_LTDCCKG) +#define __HAL_RCC_GFXMMUM_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_GFXMMUMCKG) +#define __HAL_RCC_AHB12_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AHB12CKG) +#define __HAL_RCC_AHB34_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AHB34CKG) +#define __HAL_RCC_FLIFT_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_FLIFTCKG) +#define __HAL_RCC_OCTOSPI2_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_OCTOSPI2CKG) +#define __HAL_RCC_FMC_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_FMCCKG) +#define __HAL_RCC_OCTOSPI1_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_OCTOSPI1CKG) +#define __HAL_RCC_AXIRAM1_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AXIRAM1CKG) +#define __HAL_RCC_AXIRAM2_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AXIRAM2CKG) +#define __HAL_RCC_AXIRAM3_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AXIRAM3CKG) +#define __HAL_RCC_GFXMMUS_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_GFXMMUSCKG) +#define __HAL_RCC_ECCRAM_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_ECCRAMCKG) +#define __HAL_RCC_EXTI_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_EXTICKG) +#define __HAL_RCC_JTAG_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_JTAGCKG) + +#endif /* RCC_CKGAENR_AXICKG */ + + + + +/** @brief Macro to enable or disable the Internal High Speed oscillator (HSI). + * @note After enabling the HSI, the application software should wait on + * HSIRDY flag to be set indicating that HSI clock is stable and can + * be used to clock the PLL and/or system clock. + * @note HSI can not be stopped if it is used directly or through the PLL + * as system clock. In this case, you have to select another source + * of the system clock then stop the HSI. + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @param __STATE__ specifies the new state of the HSI. + * This parameter can be one of the following values: + * @arg RCC_HSI_OFF turn OFF the HSI oscillator + * @arg RCC_HSI_ON turn ON the HSI oscillator + * @arg RCC_HSI_DIV1 turn ON the HSI oscillator and divide it by 1 (default after reset) + * @arg RCC_HSI_DIV2 turn ON the HSI oscillator and divide it by 2 + * @arg RCC_HSI_DIV4 turn ON the HSI oscillator and divide it by 4 + * @arg RCC_HSI_DIV8 turn ON the HSI oscillator and divide it by 8 + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_CONFIG(__STATE__) \ + MODIFY_REG(RCC->CR, RCC_CR_HSION | RCC_CR_HSIDIV , (uint32_t)(__STATE__)) + + +/** @brief Macro to get the HSI divider. + * @retval The HSI divider. The returned value can be one + * of the following: + * - RCC_CR_HSIDIV_1 HSI oscillator divided by 1 (default after reset) + * - RCC_CR_HSIDIV_2 HSI oscillator divided by 2 + * - RCC_CR_HSIDIV_4 HSI oscillator divided by 4 + * - RCC_CR_HSIDIV_8 HSI oscillator divided by 8 + */ +#define __HAL_RCC_GET_HSI_DIVIDER() ((uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV))) + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after start-up + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICalibrationValue__: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x7F (3F for Rev Y device). + */ +#if defined(RCC_VER_X) +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \ + do { \ + if(HAL_GetREVID() <= REV_ID_Y) \ + { \ + if((__HSICalibrationValue__) == RCC_HSICALIBRATION_DEFAULT) \ + { \ + MODIFY_REG(RCC->HSICFGR, HAL_RCC_REV_Y_HSITRIM_Msk, ((uint32_t)0x20) << HAL_RCC_REV_Y_HSITRIM_Pos); \ + } \ + else \ + { \ + MODIFY_REG(RCC->HSICFGR, HAL_RCC_REV_Y_HSITRIM_Msk, (uint32_t)(__HSICalibrationValue__) << HAL_RCC_REV_Y_HSITRIM_Pos); \ + } \ + } \ + else \ + { \ + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_HSICFGR_HSITRIM_Pos); \ + } \ + } while(0) + +#else +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \ + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_HSICFGR_HSITRIM_Pos); +#endif /*RCC_VER_X*/ +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for some peripherals. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI start-up time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + + +/** + * @brief Macro to enable or disable the Internal High Speed oscillator for USB (HSI48). + * @note After enabling the HSI48, the application software should wait on + * HSI48RDY flag to be set indicating that HSI48 clock is stable and can + * be used to clock the USB. + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSI48ON); + +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); + +/** + * @brief Macros to enable or disable the Internal oscillator (CSI). + * @note The CSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after + * start-up from Reset, wakeup from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * @note CSI can not be stopped if it is used as system clock source. + * In this case, you have to select another source of the system + * clock then stop the CSI. + * @note After enabling the CSI, the application software should wait on + * CSIRDY flag to be set indicating that CSI clock is stable and can + * be used as system clock source. + * @note When the CSI is stopped, CSIRDY flag goes low after 6 CSI oscillator + * clock cycles. + */ +#define __HAL_RCC_CSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_CSION) +#define __HAL_RCC_CSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_CSION) + +/** @brief Macro Adjusts the Internal oscillator (CSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal CSI RC. + * @param __CSICalibrationValue__: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + */ +#if defined(RCC_VER_X) +#define __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(__CSICalibrationValue__) \ + do { \ + if(HAL_GetREVID() <= REV_ID_Y) \ + { \ + if((__CSICalibrationValue__) == RCC_CSICALIBRATION_DEFAULT) \ + { \ + MODIFY_REG(RCC->HSICFGR, HAL_RCC_REV_Y_CSITRIM_Msk, ((uint32_t)0x10) << HAL_RCC_REV_Y_CSITRIM_Pos); \ + } \ + else \ + { \ + MODIFY_REG(RCC->HSICFGR, HAL_RCC_REV_Y_CSITRIM_Msk, (uint32_t)(__CSICalibrationValue__) << HAL_RCC_REV_Y_CSITRIM_Pos); \ + } \ + } \ + else \ + { \ + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, (uint32_t)(__CSICalibrationValue__) << RCC_CSICFGR_CSITRIM_Pos); \ + } \ + } while(0) + +#else +#define __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(__CSICalibrationValue__) \ + do { \ + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, (uint32_t)(__CSICalibrationValue__) << RCC_CSICFGR_CSITRIM_Pos); \ + } while(0) + +#endif /*RCC_VER_X*/ +/** + * @brief Macros to enable or disable the force of the Low-power Internal oscillator (CSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the CSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the CSI start-up time. + * @note The enable of this function has not effect on the CSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_CSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_CSIKERON) +#define __HAL_RCC_CSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_CSIKERON) + + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (__HSE__). + * @note After enabling the HSE (RCC_HSE_ON, RCC_HSE_BYPASS or RCC_HSE_BYPASS_DIGITAL), + * the application software should wait on HSERDY flag to be set indicating + * that HSE clock is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg RCC_HSE_ON: turn ON the HSE oscillator. + * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock. + * @arg RCC_HSE_BYPASS_DIGITAL: HSE oscillator bypassed with digital external clock. (*) + * + * (*): Only available on stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + */ +#if defined(RCC_CR_HSEEXT) +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS_DIGITAL) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEEXT); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + } \ + } while(0) +#else +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0) +#endif /* RCC_CR_HSEEXT */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * User should request a transition to LSE Off first and then LSE On or LSE Bypass. + * @note The external input clock can have a frequency up to 1 MHz and be low swing (analog) or digital(*). + A duty cycle close to 50% is recommended. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON, RCC_LSE_BYPASS or RCC_LSE_BYPASS_DIGITAL*), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @note If the RTC is used, the LSE bypass must not be configured in digital mode but in low swing analog mode (*) + * @param __STATE__: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg RCC_LSE_ON: turn ON the LSE oscillator. + * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock. + * @arg RCC_LSE_BYPASS_DIGITAL: LSE oscillator bypassed with external digital clock. (*) + * + * (*) Available on some STM32H7 lines only. + */ +#if defined(RCC_BDCR_LSEEXT) +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS_DIGITAL) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + } \ + } while(0) +#else + +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + } while(0) + +#endif /* RCC_BDCR_LSEEXT */ +/** + * @} + */ + +/** @brief Macros to enable or disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it can't be changed unless the + * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by + * a Power On Reset (POR). + * @param __RTCCLKSource__: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock. + * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock. + * @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected + * as RTC clock, where x:[2,31] + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + */ +#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, (((__RTCCLKSource__) & 0xFFFFCFFU) >> 4)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) + +#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \ + RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \ + } while (0) + +#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))) + + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + * @note The BKPSRAM is not affected by this reset. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLL1ON) +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON) + +/** + * @brief Enables or disables each clock output (PLL_P_CLK, PLL_Q_CLK, PLL_R_CLK) + * @note Enabling/disabling those Clocks can be done only when the PLL is disabled. + * This is mainly used to save Power. + * (The ck_pll_p of the System PLL cannot be stopped if used as System Clock). + * @param __RCC_PLL1ClockOut__: specifies the PLL clock to be outputted + * This parameter can be one of the following values: + * @arg RCC_PLL1_DIVP: This clock is used to generate system clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL1_DIVQ: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL1_DIVR: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines and requires to enable the CPU_FREQ_BOOST flash option byte, 520MHZ otherwise. + * (**) : For stm32h74xx and stm32h75xx family lines and requires the board to be connected on LDO regulator not SMPS, 400MHZ otherwise. + * (***): For stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_ENABLE(__RCC_PLL1ClockOut__) SET_BIT(RCC->PLLCFGR, (__RCC_PLL1ClockOut__)) + +#define __HAL_RCC_PLLCLKOUT_DISABLE(__RCC_PLL1ClockOut__) CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL1ClockOut__)) + + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL1 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL1 + * @retval None + */ +#define __HAL_RCC_PLLFRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) + +#define __HAL_RCC_PLLFRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) + + +/** + * @brief Macro to configures the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __RCC_PLLSOURCE__: specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSOURCE_CSI: CSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry + * @note This clock source (__RCC_PLLSource__) is common for the main PLL1 (main PLL) and PLL2 & PLL3 . + * + * @param __PLLM1__: specifies the division factor for PLL VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLLN1__: specifies the multiplication factor for PLL VCO output clock + * This parameter must be a number between 4 and 512 or between 8 and 420(*). + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLLP1__: specifies the division factor for system clock. + * This parameter must be a number between 2 or 1(**) and 128 (where odd numbers are not allowed) + * + * @param __PLLQ1__: specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLLR1__: specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ or DIVR) + * is not used, application shall clear the enable bit (DIVyEN) and assign lowest possible + * value to __PLL1P__, __PLL1Q__ or __PLL1R__ parameters. + * @retval None + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * (**): For stm32h72xxx and stm32h73xxx family lines. + */ + + +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__, __PLLM1__, __PLLN1__, __PLLP1__, __PLLQ1__,__PLLR1__ ) \ + do{ MODIFY_REG(RCC->PLLCKSELR, (RCC_PLLCKSELR_PLLSRC | RCC_PLLCKSELR_DIVM1) , ((__RCC_PLLSOURCE__) | ( (__PLLM1__) <<4U))); \ + WRITE_REG (RCC->PLL1DIVR , ( (((__PLLN1__) - 1U )& RCC_PLL1DIVR_N1) | ((((__PLLP1__) -1U ) << 9U) & RCC_PLL1DIVR_P1) | \ + ((((__PLLQ1__) -1U) << 16U)& RCC_PLL1DIVR_Q1) | ((((__PLLR1__) - 1U) << 24U)& RCC_PLL1DIVR_R1))); \ + } while(0) + + +/** @brief Macro to configure the PLLs clock source. + * @note This function must be used only when all PLLs are disabled. + * @param __PLLSOURCE__: specifies the PLLs entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSOURCE_CSI: CSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC, (__PLLSOURCE__)) + + +/** + * @brief Macro to configures the main PLL clock Fractional Part Of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL1 VCO + * + * @param __RCC_PLL1FRACN__: specifies Fractional Part Of The Multiplication Factor for PLL1 VCO + * It should be a value between 0 and 8191 + * @note Warning: The software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL1VCOSEL = 0 + * 150 to 420 MHz if PLL1VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLLFRACN_CONFIG(__RCC_PLL1FRACN__) MODIFY_REG(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN1, (uint32_t)(__RCC_PLL1FRACN__) << RCC_PLL1FRACR_FRACN1_Pos) + + +/** @brief Macro to select the PLL1 reference frequency range. + * @param __RCC_PLL1VCIRange__: specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL1VCIRANGE_0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL1VCIRANGE_1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL1VCIRANGE_2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL1VCIRANGE_3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL_VCIRANGE(__RCC_PLL1VCIRange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1RGE, (__RCC_PLL1VCIRange__)) + + +/** @brief Macro to select the PLL1 reference frequency range. + * @param __RCC_PLL1VCORange__: specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL1VCOWIDE: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL1VCOMEDIUM: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL_VCORANGE(__RCC_PLL1VCORange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1VCOSEL, (__RCC_PLL1VCORange__)) + + + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * - RCC_CFGR_SWS_CSI: CSI used as system clock. + * - RCC_CFGR_SWS_HSI: HSI used as system clock. + * - RCC_CFGR_SWS_HSE: HSE used as system clock. + * - RCC_CFGR_SWS_PLL: PLL used as system clock. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS)) + + +/** + * @brief Macro to configure the system clock source. + * @param __RCC_SYSCLKSOURCE__: specifies the system clock source. + * This parameter can be one of the following values: + * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_CSI: CSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__)) + +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * - RCC_PLLSOURCE_NONE: No oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_CSI: CSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC)) + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +/** @brief Macro to configure the MCO1 clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_PLL1QCLK: PLL1Q clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSI48: HSI48 (48MHZ) selected as MCO1 source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO1 clock + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +/** @brief Macro to configure the MCO2 clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLL2PCLK: PLL2P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLLCLK: PLL1P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_CSICLK: CSI clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_LSICLK: LSI clock selected as MCO2 source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO2 clock + */ +#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 7))); + +/** + * @} + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note On STM32H7 Rev.B and above devices this can't be updated while LSE is ON. + * @param __LSEDRIVE__: specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg RCC_LSEDRIVE_LOW: LSE oscillator low drive capability. + * @arg RCC_LSEDRIVE_MEDIUMLOW: LSE oscillator medium low drive capability. + * @arg RCC_LSEDRIVE_MEDIUMHIGH: LSE oscillator medium high drive capability. + * @arg RCC_LSEDRIVE_HIGH: LSE oscillator high drive capability. + * @retval None + */ +#if defined(RCC_VER_X) +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + do{ \ + if((HAL_GetREVID() <= REV_ID_Y) && (((__LSEDRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || ((__LSEDRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH))) \ + { \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (~(uint32_t)(__LSEDRIVE__)) & RCC_BDCR_LSEDRV_Msk); \ + } \ + else \ + { \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__)); \ + } \ + } while(0) +#else +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__)); +#endif /*RCC_VER_X*/ +/** + * @brief Macro to configure the wake up from stop clock. + * @param __RCC_STOPWUCLK__: specifies the clock source used after wake up from stop + * This parameter can be one of the following values: + * @arg RCC_STOP_WAKEUPCLOCK_CSI: CSI selected as system clock source + * @arg RCC_STOP_WAKEUPCLOCK_HSI: HSI selected as system clock source + * @retval None + */ +#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__RCC_STOPWUCLK__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, (__RCC_STOPWUCLK__)) + +/** + * @brief Macro to configure the Kernel wake up from stop clock. + * @param __RCC_STOPKERWUCLK__: specifies the Kernel clock source used after wake up from stop + * This parameter can be one of the following values: + * @arg RCC_STOP_KERWAKEUPCLOCK_CSI: CSI selected as Kernel clock source + * @arg RCC_STOP_KERWAKEUPCLOCK_HSI: HSI selected as Kernel clock source + * @retval None + */ +#define __HAL_RCC_KERWAKEUPSTOP_CLK_CONFIG(__RCC_STOPKERWUCLK__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPKERWUCK, (__RCC_STOPKERWUCLK__)) + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_CSIRDY: HSI ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_LSECSS: Clock security system interrupt + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt + * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_CSIRDY: HSI ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_LSECSS: Clock security system interrupt + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear the RCC's interrupt pending bits + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_CSIRDY: CSI ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_HSECSS: HSE Clock Security interrupt + * @arg RCC_IT_LSECSS: Clock security system interrupt + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__: specifies the RCC interrupt source to check. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_CSIRDY: CSI ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_HSECSS: HSE Clock Security interrupt + * @arg RCC_IT_LSECSS: Clock security system interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->RSR |= RCC_RSR_RMVF) + +#if defined(DUAL_CORE) +#define __HAL_RCC_C1_CLEAR_RESET_FLAGS() (RCC_C1->RSR |= RCC_RSR_RMVF) + +#define __HAL_RCC_C2_CLEAR_RESET_FLAGS() (RCC_C2->RSR |= RCC_RSR_RMVF) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +/** @brief Check RCC flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSIDIV: HSI divider flag + * @arg RCC_FLAG_CSIRDY: CSI oscillator clock ready + * @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_D1CKRDY: Domain1 clock ready + * @arg RCC_FLAG_D2CKRDY: Domain2 clock ready + * @arg RCC_FLAG_PLLRDY: PLL1 clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_C1RST: CPU reset flag + * @arg RCC_FLAG_C2RST: CPU2 reset flag + * @arg RCC_FLAG_D1RST: D1 domain power switch reset flag + * @arg RCC_FLAG_D2RST: D2 domain power switch reset flag + * @arg RCC_FLAG_BORRST: BOR reset flag + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTR1ST: System reset from CPU reset flag + * @arg RCC_FLAG_SFTR2ST: System reset from CPU2 reset flag + * @arg RCC_FLAG_BORRST: D2 domain power switch reset flag + * @arg RCC_FLAG_IWDG1RST: CPU Independent Watchdog reset + * @arg RCC_FLAG_IWDG2RST: CPU2 Independent Watchdog reset + * @arg RCC_FLAG_WWDG2RST: Window Watchdog2 reset + * @arg RCC_FLAG_WWDG1RST: Window Watchdog1 reset + * @arg RCC_FLAG_LPWR1RST: Reset due to illegal D1 DSTANDBY or CPU CSTOP flag + * @arg RCC_FLAG_LPWR2RST: Reset due to illegal D2 DSTANDBY or CPU2 CSTOP flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define RCC_FLAG_MASK ((uint8_t)0x1F) +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ +((((__FLAG__) >> 5U) == 3U)? RCC->CSR : ((((__FLAG__) >> 5U) == 4U)? RCC->RSR :RCC->CIFR)))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) + +#define __HAL_RCC_C1_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ +((((__FLAG__) >> 5U) == 3U)? RCC->CSR : ((((__FLAG__) >> 5U) == 4U)? RCC_C1->RSR :RCC->CIFR)))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) + +#define __HAL_RCC_C2_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ +((((__FLAG__) >> 5U) == 3U)? RCC->CSR : ((((__FLAG__) >> 5U) == 4U)? RCC_C2->RSR :RCC->CIFR)))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) + +#else + +/** @brief Check RCC flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSIDIV: HSI divider flag + * @arg RCC_FLAG_CSIRDY: CSI oscillator clock ready + * @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_D1CKRDY: Domain1 clock ready (*) + * @arg RCC_FLAG_D2CKRDY: Domain2 clock ready (*) + * @arg RCC_FLAG_CPUCKRDY: CPU Domain clock ready (CPU, APB3, bus matrix1 and related memories) (*) + * @arg RCC_FLAG_CDCKRDY: CPU Domain clock ready (*) + * @arg RCC_FLAG_PLLRDY: PLL1 clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_CPURST: CPU reset flag + * @arg RCC_FLAG_D1RST: D1 domain power switch reset flag (*) + * @arg RCC_FLAG_D2RST: D2 domain power switch reset flag (*) + * @arg RCC_FLAG_CDRST: CD domain power switch reset flag (*) + * @arg RCC_FLAG_BORRST: BOR reset flag + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: System reset from CPU reset flag + * @arg RCC_FLAG_BORRST: D2 domain power switch reset flag + * @arg RCC_FLAG_IWDG1RST: CPU Independent Watchdog reset + * @arg RCC_FLAG_WWDG1RST: Window Watchdog1 reset + * @arg RCC_FLAG_LPWR1RST: Reset due to illegal D1 DSTANDBY or CPU CSTOP flag + * @arg RCC_FLAG_LPWR2RST: Reset due to illegal D2 DSTANDBY flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + * + * (*) Available on some STM32H7 lines only. + */ +#define RCC_FLAG_MASK ((uint8_t)0x1F) +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ +((((__FLAG__) >> 5U) == 3U)? RCC->CSR : ((((__FLAG__) >> 5U) == 4U)? RCC->RSR :RCC->CIFR)))) & (1UL << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +#define RCC_GET_PLL_OSCSOURCE() ((RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC) >> RCC_PLLCKSELR_PLLSRC_Pos) + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32h7xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ + +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms */ +#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms */ +#define CSI_TIMEOUT_VALUE (2U) /* 2 ms */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms */ +#define PLL_FRAC_TIMEOUT_VALUE (1U) /* PLL Fractional part waiting time before new latch enable : 1 ms */ +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ +#define RCC_DBP_TIMEOUT_VALUE (100U) +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ + +#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_CSI) == RCC_OSCILLATORTYPE_CSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48)) + +#if defined(RCC_CR_HSEEXT) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_BYPASS) || ((HSE) == RCC_HSE_BYPASS_DIGITAL)) +#else +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_BYPASS)) +#endif /* RCC_CR_HSEEXT */ + +#if defined(RCC_BDCR_LSEEXT) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_BYPASS) || ((LSE) == RCC_LSE_BYPASS_DIGITAL)) +#else +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_BYPASS)) +#endif /* RCC_BDCR_LSEEXT */ + +#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON) || \ + ((HSI) == RCC_HSI_DIV1) || ((HSI) == RCC_HSI_DIV2) || \ + ((HSI) == RCC_HSI_DIV4) || ((HSI) == RCC_HSI_DIV8)) + +#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON)) + +#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON)) + +#define IS_RCC_CSI(CSI) (((CSI) == RCC_CSI_OFF) || ((CSI) == RCC_CSI_ON)) + +#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || \ + ((PLL) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_CSI) || \ + ((SOURCE) == RCC_PLLSOURCE_HSI) || \ + ((SOURCE) == RCC_PLLSOURCE_NONE) || \ + ((SOURCE) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_PLLRGE_VALUE(VALUE) (((VALUE) == RCC_PLL1VCIRANGE_0) || \ + ((VALUE) == RCC_PLL1VCIRANGE_1) || \ + ((VALUE) == RCC_PLL1VCIRANGE_2) || \ + ((VALUE) == RCC_PLL1VCIRANGE_3)) + +#define IS_RCC_PLLVCO_VALUE(VALUE) (((VALUE) == RCC_PLL1VCOWIDE) || ((VALUE) == RCC_PLL1VCOMEDIUM)) + +#define IS_RCC_PLLFRACN_VALUE(VALUE) ((VALUE) <= 8191U) + +#define IS_RCC_PLLM_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 63U)) +#if !defined(RCC_VER_2_0) +#define IS_RCC_PLLN_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 512U)) +#else +#define IS_RCC_PLLN_VALUE(VALUE) ((8U <= (VALUE)) && ((VALUE) <= 420U)) +#endif /* !RCC_VER_2_0 */ +#define IS_RCC_PLLP_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLLQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLLR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) + +#define IS_RCC_PLLCLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL1_DIVP) || \ + ((VALUE) == RCC_PLL1_DIVQ) || \ + ((VALUE) == RCC_PLL1_DIVR)) + +#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 0x3FU)) + +#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_CSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_SYSCLK(SYSCLK) (((SYSCLK) == RCC_SYSCLK_DIV1) || ((SYSCLK) == RCC_SYSCLK_DIV2) || \ + ((SYSCLK) == RCC_SYSCLK_DIV4) || ((SYSCLK) == RCC_SYSCLK_DIV8) || \ + ((SYSCLK) == RCC_SYSCLK_DIV16) || ((SYSCLK) == RCC_SYSCLK_DIV64) || \ + ((SYSCLK) == RCC_SYSCLK_DIV128) || ((SYSCLK) == RCC_SYSCLK_DIV256) || \ + ((SYSCLK) == RCC_SYSCLK_DIV512)) + + +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_HCLK_DIV1) || ((HCLK) == RCC_HCLK_DIV2) || \ + ((HCLK) == RCC_HCLK_DIV4) || ((HCLK) == RCC_HCLK_DIV8) || \ + ((HCLK) == RCC_HCLK_DIV16) || ((HCLK) == RCC_HCLK_DIV64) || \ + ((HCLK) == RCC_HCLK_DIV128) || ((HCLK) == RCC_HCLK_DIV256) || \ + ((HCLK) == RCC_HCLK_DIV512)) + +#define IS_RCC_CDPCLK1(CDPCLK1) (((CDPCLK1) == RCC_APB3_DIV1) || ((CDPCLK1) == RCC_APB3_DIV2) || \ + ((CDPCLK1) == RCC_APB3_DIV4) || ((CDPCLK1) == RCC_APB3_DIV8) || \ + ((CDPCLK1) == RCC_APB3_DIV16)) + +#define IS_RCC_D1PCLK1 IS_RCC_CDPCLK1 /* for legacy compatibility between H7 lines */ + +#define IS_RCC_PCLK1(PCLK1) (((PCLK1) == RCC_APB1_DIV1) || ((PCLK1) == RCC_APB1_DIV2) || \ + ((PCLK1) == RCC_APB1_DIV4) || ((PCLK1) == RCC_APB1_DIV8) || \ + ((PCLK1) == RCC_APB1_DIV16)) + +#define IS_RCC_PCLK2(PCLK2) (((PCLK2) == RCC_APB2_DIV1) || ((PCLK2) == RCC_APB2_DIV2) || \ + ((PCLK2) == RCC_APB2_DIV4) || ((PCLK2) == RCC_APB2_DIV8) || \ + ((PCLK2) == RCC_APB2_DIV16)) + +#define IS_RCC_SRDPCLK1(SRDPCLK1) (((SRDPCLK1) == RCC_APB4_DIV1) || ((SRDPCLK1) == RCC_APB4_DIV2) || \ + ((SRDPCLK1) == RCC_APB4_DIV4) || ((SRDPCLK1) == RCC_APB4_DIV8) || \ + ((SRDPCLK1) == RCC_APB4_DIV16)) + +#define IS_RCC_D3PCLK1 IS_RCC_SRDPCLK1 /* for legacy compatibility between H7 lines*/ + +#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_LSE) || ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV2) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV3) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV4) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV5) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV6) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV7) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV8) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV9) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV10) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV11) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV12) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV13) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV14) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV15) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV16) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV17) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV18) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV19) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV20) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV21) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV22) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV23) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV24) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV25) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV26) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV27) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV28) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV29) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV30) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV31) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV33) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV34) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV35) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV36) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV37) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV38) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV39) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV40) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV41) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV42) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV43) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV44) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV45) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV46) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV47) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV48) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV49) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV50) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV51) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV52) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV53) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV54) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV55) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV56) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV57) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV58) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV59) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV60) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV61) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV62) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV63)) + +#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2)) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLL1QCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI48)) + +#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLL2PCLK) || \ + ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK) || \ + ((SOURCE) == RCC_MCO2SOURCE_CSICLK) || ((SOURCE) == RCC_MCO2SOURCE_LSICLK)) + +#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ + ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \ + ((DIV) == RCC_MCODIV_5) || ((DIV) == RCC_MCODIV_6) || \ + ((DIV) == RCC_MCODIV_7) || ((DIV) == RCC_MCODIV_8) || \ + ((DIV) == RCC_MCODIV_9) || ((DIV) == RCC_MCODIV_10) || \ + ((DIV) == RCC_MCODIV_11) || ((DIV) == RCC_MCODIV_12) || \ + ((DIV) == RCC_MCODIV_13) || ((DIV) == RCC_MCODIV_14) || \ + ((DIV) == RCC_MCODIV_15)) + +#if defined(DUAL_CORE) +#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_CSIRDY) || \ + ((FLAG) == RCC_FLAG_HSI48RDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_D1CKRDY) || ((FLAG) == RCC_FLAG_D2CKRDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_PLL2RDY) || \ + ((FLAG) == RCC_FLAG_PLL3RDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || \ + ((FLAG) == RCC_FLAG_C1RST) || ((FLAG) == RCC_FLAG_C2RST) || \ + ((FLAG) == RCC_FLAG_SFTR2ST) || ((FLAG) == RCC_FLAG_WWDG2RST)|| \ + ((FLAG) == RCC_FLAG_IWDG2RST) || ((FLAG) == RCC_FLAG_D1RST) || \ + ((FLAG) == RCC_FLAG_D2RST) || ((FLAG) == RCC_FLAG_BORRST) || \ + ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ + ((FLAG) == RCC_FLAG_SFTR1ST) || ((FLAG) == RCC_FLAG_IWDG1RST)|| \ + ((FLAG) == RCC_FLAG_WWDG1RST) || ((FLAG) == RCC_FLAG_LPWR1RST)|| \ + ((FLAG) == RCC_FLAG_LPWR2RST) || ((FLAG) == RCC_FLAG_HSIDIV)) + +#else + +#if defined(RCC_CR_D2CKRDY) +#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_CSIRDY) || \ + ((FLAG) == RCC_FLAG_HSI48RDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_D1CKRDY) || ((FLAG) == RCC_FLAG_D2CKRDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_PLL2RDY) || \ + ((FLAG) == RCC_FLAG_PLL3RDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || \ + ((FLAG) == RCC_FLAG_CPURST) || ((FLAG) == RCC_FLAG_D1RST) || \ + ((FLAG) == RCC_FLAG_D2RST) || ((FLAG) == RCC_FLAG_BORRST) || \ + ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ + ((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDG1RST)|| \ + ((FLAG) == RCC_FLAG_WWDG1RST) || ((FLAG) == RCC_FLAG_LPWR1RST)|| \ + ((FLAG) == RCC_FLAG_LPWR2RST) || ((FLAG) == RCC_FLAG_HSIDIV )) +#else +#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_CSIRDY) || \ + ((FLAG) == RCC_FLAG_HSI48RDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_CPUCKRDY) || ((FLAG) == RCC_FLAG_CDCKRDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_PLL2RDY) || \ + ((FLAG) == RCC_FLAG_PLL3RDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || \ + ((FLAG) == RCC_FLAG_CDRST) || ((FLAG) == RCC_FLAG_BORRST) || \ + ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ + ((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDG1RST)|| \ + ((FLAG) == RCC_FLAG_WWDG1RST) || ((FLAG) == RCC_FLAG_LPWR1RST)|| \ + ((FLAG) == RCC_FLAG_LPWR2RST) || ((FLAG) == RCC_FLAG_HSIDIV )) +#endif /* RCC_CR_D2CKRDY */ + +#endif /*DUAL_CORE*/ + +#define IS_RCC_HSICALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7FU) +#define IS_RCC_CSICALIBRATION_VALUE(VALUE) ((VALUE) <= 0x3FU) + +#define IS_RCC_STOP_WAKEUPCLOCK(SOURCE) (((SOURCE) == RCC_STOP_WAKEUPCLOCK_CSI) || \ + ((SOURCE) == RCC_STOP_WAKEUPCLOCK_HSI)) + +#define IS_RCC_STOP_KERWAKEUPCLOCK(SOURCE) (((SOURCE) == RCC_STOP_KERWAKEUPCLOCK_CSI) || \ + ((SOURCE) == RCC_STOP_KERWAKEUPCLOCK_HSI)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_RCC_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h new file mode 100644 index 0000000..2fb1fd2 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h @@ -0,0 +1,4482 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_RCC_EX_H +#define STM32H7xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief PLL2 Clock structure definition + */ +typedef struct +{ + + uint32_t PLL2M; /*!< PLL2M: Division factor for PLL2 VCO input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 63 */ + + uint32_t PLL2N; /*!< PLL2N: Multiplication factor for PLL2 VCO output clock. + This parameter must be a number between Min_Data = 4 and Max_Data = 512 + or between Min_Data = 8 and Max_Data = 420(*) + (*) : For stm32h7a3xx and stm32h7b3xx family lines. */ + + uint32_t PLL2P; /*!< PLL2P: Division factor for system clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 128 + odd division factors are not allowed */ + + uint32_t PLL2Q; /*!< PLL2Q: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t PLL2R; /*!< PLL2R: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + uint32_t PLL2RGE; /*!CR, RCC_CR_PLL2ON) +#define __HAL_RCC_PLL2_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON) + +/** + * @brief Enables or disables each clock output (PLL2_P_CLK, PLL2_Q_CLK, PLL2_R_CLK) + * @note Enabling/disabling those Clocks can be done only when the PLL2 is disabled, + * This is mainly used to save Power. + * @param __RCC_PLL2ClockOut__ Specifies the PLL2 clock to be outputted + * This parameter can be one of the following values: + * @arg RCC_PLL2_DIVP: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL2_DIVQ: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL2_DIVR: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines and requires to enable the CPU_FREQ_BOOST flash option byte, 520MHZ otherwise. + * (**) : For stm32h74xx and stm32h75xx family lines and requires the board to be connected on LDO regulator not SMPS, 400MHZ otherwise. + * (***): For stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2CLKOUT_ENABLE(__RCC_PLL2ClockOut__) SET_BIT(RCC->PLLCFGR, (__RCC_PLL2ClockOut__)) + +#define __HAL_RCC_PLL2CLKOUT_DISABLE(__RCC_PLL2ClockOut__) CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL2ClockOut__)) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL2 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL2 + * @retval None + */ +#define __HAL_RCC_PLL2FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) + +#define __HAL_RCC_PLL2FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) + +/** + * @brief Macro to configures the PLL2 multiplication and division factors. + * @note This function must be used only when PLL2 is disabled. + * + * @param __PLL2M__ specifies the division factor for PLL2 VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL2N__ specifies the multiplication factor for PLL2 VCO output clock + * This parameter must be a number between 4 and 512 or between 8 and 420(*). + * @note You have to set the PLL2N parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLL2P__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ or DIVR) + * is not used, application shall clear the enable bit (DIVyEN) and assign lowest possible + * value to __PLL2P__, __PLL2Q__ or __PLL2R__ parameters. + * @retval None + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + */ + +#define __HAL_RCC_PLL2_CONFIG(__PLL2M__, __PLL2N__, __PLL2P__, __PLL2Q__,__PLL2R__ ) \ + do{ \ + MODIFY_REG(RCC->PLLCKSELR, ( RCC_PLLCKSELR_DIVM2) , ( (__PLL2M__) <<12U)); \ + WRITE_REG (RCC->PLL2DIVR , ( (((__PLL2N__) - 1U ) & RCC_PLL2DIVR_N2) | ((((__PLL2P__) -1U ) << 9U) & RCC_PLL2DIVR_P2) | \ + ((((__PLL2Q__) -1U) << 16U) & RCC_PLL2DIVR_Q2) | ((((__PLL2R__)- 1U) << 24U) & RCC_PLL2DIVR_R2))); \ + } while(0) + +/** + * @brief Macro to configures PLL2 clock Fractional Part Of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL2 VCO + * + * @param __RCC_PLL2FRACN__ Specifies Fractional Part Of The Multiplication factor for PLL2 VCO + * It should be a value between 0 and 8191 + * @note Warning: the software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL2VCOSEL = 0 + * 150 to 420 MHz if PLL2VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2FRACN_CONFIG(__RCC_PLL2FRACN__) \ + MODIFY_REG(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN2,((uint32_t)(__RCC_PLL2FRACN__) << RCC_PLL2FRACR_FRACN2_Pos)) + +/** @brief Macro to select the PLL2 reference frequency range. + * @param __RCC_PLL2VCIRange__ specifies the PLL2 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL2VCIRANGE_0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL2VCIRANGE_1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL2VCIRANGE_2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL2VCIRANGE_3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL2_VCIRANGE(__RCC_PLL2VCIRange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2RGE, (__RCC_PLL2VCIRange__)) + + +/** @brief Macro to select the PLL2 reference frequency range. + * @param __RCC_PLL2VCORange__ Specifies the PLL2 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL2VCOWIDE: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL2VCOMEDIUM: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2_VCORANGE(__RCC_PLL2VCORange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2VCOSEL, (__RCC_PLL2VCORange__)) + +/** @brief Macros to enable or disable the main PLL3. + * @note After enabling PLL3, the application software should wait on + * PLL3RDY flag to be set indicating that PLL3 clock is stable and can + * be used as kernel clock source. + * @note PLL3 is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL3_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLL3ON) +#define __HAL_RCC_PLL3_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL3 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL3 + * @retval None + */ +#define __HAL_RCC_PLL3FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) + +#define __HAL_RCC_PLL3FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) + +/** + * @brief Enables or disables each clock output (PLL3_P_CLK, PLL3_Q_CLK, PLL3_R_CLK) + * @note Enabling/disabling those Clocks can be done only when the PLL3 is disabled, + * This is mainly used to save Power. + * @param __RCC_PLL3ClockOut__ specifies the PLL3 clock to be outputted + * This parameter can be one of the following values: + * @arg RCC_PLL3_DIVP: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL3_DIVQ: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL3_DIVR: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines and requires to enable the CPU_FREQ_BOOST flash option byte, 520MHZ otherwise. + * (**) : For stm32h74xx and stm32h75xx family lines and requires the board to be connected on LDO regulator not SMPS, 400MHZ otherwise. + * (***): For stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3CLKOUT_ENABLE(__RCC_PLL3ClockOut__) SET_BIT(RCC->PLLCFGR, (__RCC_PLL3ClockOut__)) + +#define __HAL_RCC_PLL3CLKOUT_DISABLE(__RCC_PLL3ClockOut__) CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL3ClockOut__)) + +/** + * @brief Macro to configures the PLL3 multiplication and division factors. + * @note This function must be used only when PLL3 is disabled. + * + * @param __PLL3M__ specifies the division factor for PLL3 VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL3N__ specifies the multiplication factor for PLL3 VCO output clock + * This parameter must be a number between 4 and 512. + * @note You have to set the PLL3N parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLL3P__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 2 and 128 (where odd numbers not allowed) + * + * @param __PLL3Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLL3R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ or DIVR) + * is not used, application shall clear the enable bit (DIVyEN) and assign lowest possible + * value to __PLL3P__, __PLL3Q__ or __PLL3R__ parameters. + * @retval None + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + */ + +#define __HAL_RCC_PLL3_CONFIG(__PLL3M__, __PLL3N__, __PLL3P__, __PLL3Q__,__PLL3R__ ) \ + do{ MODIFY_REG(RCC->PLLCKSELR, ( RCC_PLLCKSELR_DIVM3) , ( (__PLL3M__) <<20U)); \ + WRITE_REG (RCC->PLL3DIVR , ( (((__PLL3N__) - 1U ) & RCC_PLL3DIVR_N3) | ((((__PLL3P__) -1U ) << 9U) & RCC_PLL3DIVR_P3) | \ + ((((__PLL3Q__) -1U) << 16U) & RCC_PLL3DIVR_Q3) | ((((__PLL3R__) - 1U) << 24U) & RCC_PLL3DIVR_R3))); \ + } while(0) + + + +/** + * @brief Macro to configures PLL3 clock Fractional Part of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL3 VCO + * + * @param __RCC_PLL3FRACN__ specifies Fractional Part Of The Multiplication Factor for PLL3 VCO + * It should be a value between 0 and 8191 + * @note Warning: the software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL3VCOSEL = 0 + * 150 to 420 MHz if PLL3VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3FRACN_CONFIG(__RCC_PLL3FRACN__) MODIFY_REG(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN3, (uint32_t)(__RCC_PLL3FRACN__) << RCC_PLL3FRACR_FRACN3_Pos) + +/** @brief Macro to select the PLL3 reference frequency range. + * @param __RCC_PLL3VCIRange__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL3VCIRANGE_0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL3VCIRANGE_1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL3VCIRANGE_2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL3VCIRANGE_3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL3_VCIRANGE(__RCC_PLL3VCIRange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3RGE, (__RCC_PLL3VCIRange__)) + + +/** @brief Macro to select the PLL3 reference frequency range. + * @param __RCC_PLL3VCORange__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL3VCOWIDE: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL3VCOMEDIUM: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3_VCORANGE(__RCC_PLL3VCORange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3VCOSEL, (__RCC_PLL3VCORange__)) +/** + * @brief Macro to Configure the SAI1 clock source. + * @param __RCC_SAI1CLKSource__ defines the SAI1 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLL: SAI1 clock = PLL + * @arg RCC_SAI1CLKSOURCE_PLL2: SAI1 clock = PLL2 + * @arg RCC_SAI1CLKSOURCE_PLL3: SAI1 clock = PLL3 + * @arg RCC_SAI1CLKSOURCE_OSC: SAI1 clock = OSC + * @arg RCC_SAI1CLKSOURCE_PIN: SAI1 clock = External Clock + * @retval None + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define __HAL_RCC_SAI1_CONFIG(__RCC_SAI1CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI1SEL, (__RCC_SAI1CLKSource__)) +#else +#define __HAL_RCC_SAI1_CONFIG(__RCC_SAI1CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI1SEL, (__RCC_SAI1CLKSource__)) +#endif /* RCC_D2CCIP1R_SAI1SEL */ + +/** @brief Macro to get the SAI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLL: SAI1 clock = PLL + * @arg RCC_SAI1CLKSOURCE_PLL2: SAI1 clock = PLL2 + * @arg RCC_SAI1CLKSOURCE_PLL3: SAI1 clock = PLL3 + * @arg RCC_SAI1CLKSOURCE_CLKP: SAI1 clock = CLKP + * @arg RCC_SAI1CLKSOURCE_PIN: SAI1 clock = External Clock + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI1SEL))) +#else +#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI1SEL))) +#endif /* RCC_D2CCIP1R_SAI1SEL */ + +/** + * @brief Macro to Configure the SPDIFRX clock source. + * @param __RCC_SPDIFCLKSource__ defines the SPDIFRX clock source. This clock is derived + * from system PLL, PLL2, PLL3, or internal OSC clock + * This parameter can be one of the following values: + * @arg RCC_SPDIFRXCLKSOURCE_PLL: SPDIFRX clock = PLL + * @arg RCC_SPDIFRXCLKSOURCE_PLL2: SPDIFRX clock = PLL2 + * @arg RCC_SPDIFRXCLKSOURCE_PLL3: SPDIFRX clock = PLL3 + * @arg RCC_SPDIFRXCLKSOURCE_HSI: SPDIFRX clock = HSI + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define __HAL_RCC_SPDIFRX_CONFIG(__RCC_SPDIFCLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL, (__RCC_SPDIFCLKSource__)) +#else +#define __HAL_RCC_SPDIFRX_CONFIG(__RCC_SPDIFCLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL, (__RCC_SPDIFCLKSource__)) +#endif /* RCC_D2CCIP1R_SPDIFSEL */ + +/** + * @brief Macro to get the SPDIFRX clock source. + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define __HAL_RCC_GET_SPDIFRX_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL))) +#else +#define __HAL_RCC_GET_SPDIFRX_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL))) +#endif /* RCC_D2CCIP1R_SPDIFSEL */ + +#if defined(SAI3) +/** + * @brief Macro to Configure the SAI2/3 clock source. + * @param __RCC_SAI23CLKSource__ defines the SAI2/3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI23CLKSOURCE_PLL: SAI2/3 clock = PLL + * @arg RCC_SAI23CLKSOURCE_PLL2: SAI2/3 clock = PLL2 + * @arg RCC_SAI23CLKSOURCE_PLL3: SAI2/3 clock = PLL3 + * @arg RCC_SAI23CLKSOURCE_CLKP: SAI2/3 clock = CLKP + * @arg RCC_SAI23CLKSOURCE_PIN: SAI2/3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI23_CONFIG(__RCC_SAI23CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI23SEL, (__RCC_SAI23CLKSource__)) + +/** @brief Macro to get the SAI2/3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI23CLKSOURCE_PLL: SAI2/3 clock = PLL + * @arg RCC_SAI23CLKSOURCE_PLL2: SAI2/3 clock = PLL2 + * @arg RCC_SAI23CLKSOURCE_PLL3: SAI2/3 clock = PLL3 + * @arg RCC_SAI23CLKSOURCE_CLKP: SAI2/3 clock = CLKP + * @arg RCC_SAI23CLKSOURCE_PIN: SAI2/3 clock = External Clock + */ +#define __HAL_RCC_GET_SAI23_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI23SEL))) + +/** + * @brief Macro to Configure the SAI2 clock source. + * @param __RCC_SAI2CLKSource__ defines the SAI2 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2 clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2 clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2 clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2 clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI2_CONFIG __HAL_RCC_SAI23_CONFIG + +/** @brief Macro to get the SAI2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2 clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2 clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2 clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2 clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2 clock = External Clock + */ +#define __HAL_RCC_GET_SAI2_SOURCE __HAL_RCC_GET_SAI23_SOURCE + +/** + * @brief Macro to Configure the SAI3 clock source. + * @param __RCC_SAI3CLKSource__ defines the SAI3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI3CLKSOURCE_PLL: SAI3 clock = PLL + * @arg RCC_SAI3CLKSOURCE_PLL2: SAI3 clock = PLL2 + * @arg RCC_SAI3CLKSOURCE_PLL3: SAI3 clock = PLL3 + * @arg RCC_SAI3CLKSOURCE_CLKP: SAI3 clock = CLKP + * @arg RCC_SAI3CLKSOURCE_PIN: SAI3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI3_CONFIG __HAL_RCC_SAI23_CONFIG + +/** @brief Macro to get the SAI3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI3CLKSOURCE_PLL: SAI3 clock = PLL + * @arg RCC_SAI3CLKSOURCE_PLL2: SAI3 clock = PLL2 + * @arg RCC_SAI3CLKSOURCE_PLL3: SAI3 clock = PLL3 + * @arg RCC_SAI3CLKSOURCE_CLKP: SAI3 clock = CLKP + * @arg RCC_SAI3CLKSOURCE_PIN: SAI3 clock = External Clock + */ +#define __HAL_RCC_GET_SAI3_SOURCE __HAL_RCC_GET_SAI23_SOURCE +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) +/** + * @brief Macro to Configure the SAI2A clock source. + * @param __RCC_SAI2ACLKSource__ defines the SAI2A clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2ACLKSOURCE_PLL: SAI2A clock = PLL + * @arg RCC_SAI2ACLKSOURCE_PLL2: SAI2A clock = PLL2 + * @arg RCC_SAI2ACLKSOURCE_PLL3: SAI2A clock = PLL3 + * @arg RCC_SAI2ACLKSOURCE_CLKP: SAI2A clock = CLKP + * @arg RCC_SAI2ACLKSOURCE_PIN: SAI2A clock = External Clock + * @arg RCC_SAI2ACLKSOURCE_SPDIF: SAI2A clock = SPDIF Clock + * @retval None + */ +#define __HAL_RCC_SAI2A_CONFIG(__RCC_SAI2ACLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2ASEL, (__RCC_SAI2ACLKSource__)) + +/** @brief Macro to get the SAI2A clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2A clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2A clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2A clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2A clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2A clock = External Clock + * @arg RCC_SAI2ACLKSOURCE_SPDIF: SAI2A clock = SPDIF Clock + */ +#define __HAL_RCC_GET_SAI2A_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2ASEL))) +#endif /* defined(RCC_CDCCIP1R_SAI2ASEL) */ + +#if defined(RCC_CDCCIP1R_SAI2BSEL) +/** + * @brief Macro to Configure the SAI2B clock source. + * @param __RCC_SAI2BCLKSource__ defines the SAI2B clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2BCLKSOURCE_PLL: SAI2B clock = PLL + * @arg RCC_SAI2BCLKSOURCE_PLL2: SAI2B clock = PLL2 + * @arg RCC_SAI2BCLKSOURCE_PLL3: SAI2B clock = PLL3 + * @arg RCC_SAI2BCLKSOURCE_CLKP: SAI2B clock = CLKP + * @arg RCC_SAI2BCLKSOURCE_PIN: SAI2B clock = External Clock + * @arg RCC_SAI2BCLKSOURCE_SPDIF: SAI2B clock = SPDIF Clock + * @retval None + */ +#define __HAL_RCC_SAI2B_CONFIG(__RCC_SAI2BCLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2BSEL, (__RCC_SAI2BCLKSource__)) + +/** @brief Macro to get the SAI2B clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2BCLKSOURCE_PLL: SAI2B clock = PLL + * @arg RCC_SAI2BCLKSOURCE_PLL2: SAI2B clock = PLL2 + * @arg RCC_SAI2BCLKSOURCE_PLL3: SAI2B clock = PLL3 + * @arg RCC_SAI2BCLKSOURCE_CLKP: SAI2B clock = CLKP + * @arg RCC_SAI2BCLKSOURCE_PIN: SAI2B clock = External Clock + * @arg RCC_SAI2BCLKSOURCE_SPDIF: SAI2B clock = SPDIF Clock + */ +#define __HAL_RCC_GET_SAI2B_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2BSEL))) +#endif /* defined(RCC_CDCCIP1R_SAI2BSEL) */ + + +#if defined(SAI4_Block_A) +/** + * @brief Macro to Configure the SAI4A clock source. + * @param __RCC_SAI4ACLKSource__ defines the SAI4A clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI4ACLKSOURCE_PLL: SAI4A clock = PLL + * @arg RCC_SAI4ACLKSOURCE_PLL2: SAI4A clock = PLL2 + * @arg RCC_SAI4ACLKSOURCE_PLL3: SAI4A clock = PLL3 + * @arg RCC_SAI4ACLKSOURCE_CLKP: SAI4A clock = CLKP + * @arg RCC_SAI4ACLKSOURCE_PIN: SAI4A clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI4A_CONFIG(__RCC_SAI4ACLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SAI4ASEL, (__RCC_SAI4ACLKSource__)) + +/** @brief Macro to get the SAI4A clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI4ACLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4ACLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4ACLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4ACLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4ACLKSOURCE_PIN: SAI4B clock = External Clock + */ +#define __HAL_RCC_GET_SAI4A_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SAI4ASEL))) +#endif /* SAI4_Block_A */ + +#if defined(SAI4_Block_B) +/** + * @brief Macro to Configure the SAI4B clock source. + * @param __RCC_SAI4BCLKSource__ defines the SAI4B clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI4BCLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4BCLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4BCLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4BCLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4BCLKSOURCE_PIN: SAI4B clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI4B_CONFIG(__RCC_SAI4BCLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SAI4BSEL, (__RCC_SAI4BCLKSource__)) + +/** @brief Macro to get the SAI4B clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI4BCLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4BCLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4BCLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4BCLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4BCLKSOURCE_PIN: SAI4B clock = External Clock + */ +#define __HAL_RCC_GET_SAI4B_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SAI4BSEL))) +#endif /* SAI4_Block_B */ + +/** @brief macro to configure the I2C1/2/3/5* clock (I2C123CLK). + * + * @param __I2C1235CLKSource__ specifies the I2C1/2/3/5* clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C123CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_PLL3: PLL3 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_HSI: HSI selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_CSI: CSI selected as I2C1/2/3/5* clock + * + * (**): Available on stm32h72xxx and stm32h73xxx family lines. + */ +#if defined(RCC_D2CCIP2R_I2C123SEL) +#define __HAL_RCC_I2C123_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C123SEL, (uint32_t)(__I2C1235CLKSource__)) +#elif defined(RCC_CDCCIP2R_I2C123SEL) +#define __HAL_RCC_I2C123_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_I2C123SEL, (uint32_t)(__I2C1235CLKSource__)) +#else /* RCC_D2CCIP2R_I2C1235SEL */ +#define __HAL_RCC_I2C1235_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C1235SEL, (uint32_t)(__I2C1235CLKSource__)) +/* alias */ +#define __HAL_RCC_I2C123_CONFIG __HAL_RCC_I2C1235_CONFIG +#endif /* RCC_D2CCIP2R_I2C123SEL */ + +/** @brief macro to get the I2C1/2/3/5* clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C123CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_PLL3: PLL3 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_HSI: HSI selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_CSI: CSI selected as I2C1/2/3/5* clock + * + * (**): Available on stm32h72xxx and stm32h73xxx family lines. + */ +#if defined(RCC_D2CCIP2R_I2C123SEL) +#define __HAL_RCC_GET_I2C123_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C123SEL))) +#elif defined(RCC_CDCCIP2R_I2C123SEL) +#define __HAL_RCC_GET_I2C123_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_I2C123SEL))) +#else /* RCC_D2CCIP2R_I2C1235SEL */ +#define __HAL_RCC_GET_I2C1235_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C1235SEL))) +/* alias */ +#define __HAL_RCC_GET_I2C123_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#endif /* RCC_D2CCIP2R_I2C123SEL */ + +/** @brief macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1CLKSource__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C1CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_PLL3: PLL3 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_CSI: CSI selected as I2C1 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C1_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C1_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C1CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_PLL3: PLL3 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_CSI: CSI selected as I2C1 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C1_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C1_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C2 clock (I2C2CLK). + * + * @param __I2C2CLKSource__ specifies the I2C2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C2CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_PLL3: PLL3 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_CSI: CSI selected as I2C2 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C2_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C2_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C2CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_PLL3: PLL3 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_CSI: CSI selected as I2C2 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C2_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C2_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C3 clock (I2C3CLK). + * + * @param __I2C3CLKSource__ specifies the I2C3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C3CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_PLL3: PLL3 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_CSI: CSI selected as I2C3 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C3_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C3_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C3CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_PLL3: PLL3 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_CSI: CSI selected as I2C3 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C3_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C3_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C4 clock (I2C4CLK). + * + * @param __I2C4CLKSource__ specifies the I2C4 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C4CLKSOURCE_D3PCLK1: D3PCLK1 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_PLL3: PLL3 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_CSI: CSI selected as I2C4 clock + */ +#if defined(RCC_D3CCIPR_I2C4SEL) +#define __HAL_RCC_I2C4_CONFIG(__I2C4CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_I2C4SEL, (uint32_t)(__I2C4CLKSource__)) +#else +#define __HAL_RCC_I2C4_CONFIG(__I2C4CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_I2C4SEL, (uint32_t)(__I2C4CLKSource__)) +#endif /* RCC_D3CCIPR_I2C4SEL */ + +/** @brief macro to get the I2C4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C4CLKSOURCE_D3PCLK1: D3PCLK1 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_PLL3: PLL3 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_CSI: CSI selected as I2C4 clock + */ +#if defined(RCC_D3CCIPR_I2C4SEL) +#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_I2C4SEL))) +#else +#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_I2C4SEL))) +#endif /* RCC_D3CCIPR_I2C4SEL */ + +#if defined(I2C5) +/** @brief macro to configure the I2C5 clock (I2C5CLK). + * + * @param __I2C5CLKSource__ specifies the I2C5 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C5CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_PLL3: PLL3 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_HSI: HSI selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_CSI: CSI selected as I2C5 clock + */ +#define __HAL_RCC_I2C5_CONFIG __HAL_RCC_I2C1235_CONFIG +#endif /* I2C5 */ + +#if defined(I2C5) +/** @brief macro to get the I2C5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C5CLKSOURCE_D2PCLK1: D2PCLK5 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_PLL3: PLL3 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_HSI: HSI selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_CSI: CSI selected as I2C5 clock + */ +#define __HAL_RCC_GET_I2C5_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#endif /* I2C5 */ + +/** @brief macro to configure the USART1/6/9* /10* clock (USART16CLK). + * + * @param __USART16910CLKSource__ specifies the USART1/6/9* /10* clock source. + * This parameter can be one of the following values: + * @arg RCC_USART16CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_HSI: HSI selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_CSI: CSI Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_LSE: LSE selected as USART1/6/9* /10* clock + * + * (*) : Available on some STM32H7 lines only. + */ +#if defined(RCC_D2CCIP2R_USART16SEL) +#define __HAL_RCC_USART16_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16SEL, (uint32_t)(__USART16910CLKSource__)) +#elif defined(RCC_CDCCIP2R_USART16910SEL) +#define __HAL_RCC_USART16910_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USART16910SEL, (uint32_t)(__USART16910CLKSource__)) +/* alias */ +#define __HAL_RCC_USART16_CONFIG __HAL_RCC_USART16910_CONFIG +#else /* RCC_D2CCIP2R_USART16910SEL */ +#define __HAL_RCC_USART16910_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16910SEL, (uint32_t)(__USART16910CLKSource__)) +/* alias */ +#define __HAL_RCC_USART16_CONFIG __HAL_RCC_USART16910_CONFIG +#endif /* RCC_D2CCIP2R_USART16SEL */ + +/** @brief macro to get the USART1/6/9* /10* clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART16CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_HSI: HSI selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_CSI: CSI Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_LSE: LSE selected as USART1/6/9* /10* clock + * + * (*) : Available on some STM32H7 lines only. + */ +#if defined(RCC_D2CCIP2R_USART16SEL) +#define __HAL_RCC_GET_USART16_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16SEL))) +#elif defined(RCC_CDCCIP2R_USART16910SEL) +#define __HAL_RCC_GET_USART16910_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USART16910SEL))) +/* alias*/ +#define __HAL_RCC_GET_USART16_SOURCE __HAL_RCC_GET_USART16910_SOURCE +#else /* RCC_D2CCIP2R_USART16910SEL */ +#define __HAL_RCC_GET_USART16910_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16910SEL))) +/* alias */ +#define __HAL_RCC_GET_USART16_SOURCE __HAL_RCC_GET_USART16910_SOURCE +#endif /* RCC_D2CCIP2R_USART16SEL */ + +/** @brief macro to configure the USART234578 clock (USART234578CLK). + * + * @param __USART234578CLKSource__ specifies the USART2/3/4/5/7/8 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART234578CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_HSI: HSI selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_CSI: CSI Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_LSE: LSE selected as USART2/3/4/5/7/8 clock + */ +#if defined(RCC_D2CCIP2R_USART28SEL) +#define __HAL_RCC_USART234578_CONFIG(__USART234578CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART28SEL, (uint32_t)(__USART234578CLKSource__)) +#else +#define __HAL_RCC_USART234578_CONFIG(__USART234578CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USART234578SEL, (uint32_t)(__USART234578CLKSource__)) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +/** @brief macro to get the USART2/3/4/5/7/8 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART234578CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_HSI: HSI selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_CSI: CSI Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_LSE: LSE selected as USART2/3/4/5/7/8 clock + */ +#if defined(RCC_D2CCIP2R_USART28SEL) +#define __HAL_RCC_GET_USART234578_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART28SEL))) +#else +#define __HAL_RCC_GET_USART234578_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USART234578SEL))) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +/** @brief macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1CLKSource__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART1CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_CSI: CSI Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART1CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_CSI: CSI Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE __HAL_RCC_GET_USART16_SOURCE + +/** @brief macro to configure the USART2 clock (USART2CLK). + * + * @param __USART2CLKSource__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_CSI: CSI Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock + */ +#define __HAL_RCC_USART2_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_CSI: CSI Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the USART3 clock (USART3CLK). + * + * @param __USART3CLKSource__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART3CLKSOURCE_D2PCLK1: APB1 Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL2: PLL2_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL3: PLL3_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_CSI: CSI Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock + */ +#define __HAL_RCC_USART3_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL2: PLL2_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL3: PLL3_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_CSI: CSI Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART4 clock (UART4CLK). + * + * @param __UART4CLKSource__ specifies the UART4 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART4CLKSOURCE_D2PCLK1: APB1 Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL2: PLL2_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL3: PLL3_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_CSI: CSI Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock + */ +#define __HAL_RCC_UART4_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART4CLKSOURCE_D2PCLK1: APB1 Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL2: PLL2_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL3: PLL3_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_CSI: CSI Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock + */ +#define __HAL_RCC_GET_UART4_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART5 clock (UART5CLK). + * + * @param __UART5CLKSource__ specifies the UART5 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART5CLKSOURCE_D2PCLK1: APB1 Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL2: PLL2_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL3: PLL3_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_CSI: CSI Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock + */ +#define __HAL_RCC_UART5_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART5CLKSOURCE_D2PCLK1: APB1 Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL2: PLL2_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL3: PLL3_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_CSI: CSI Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock + */ +#define __HAL_RCC_GET_UART5_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the USART6 clock (USART6CLK). + * + * @param __USART6CLKSource__ specifies the USART6 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART6CLKSOURCE_D2PCLK2: APB2 Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL2: PLL2_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL3: PLL3_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_CSI: CSI Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock + */ +#define __HAL_RCC_USART6_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART6 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART6CLKSOURCE_D2PCLK2: APB2 Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL2: PLL2_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL3: PLL3_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_CSI: CSI Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock + */ +#define __HAL_RCC_GET_USART6_SOURCE __HAL_RCC_GET_USART16_SOURCE + +/** @brief macro to configure the UART5 clock (UART7CLK). + * + * @param __UART7CLKSource__ specifies the UART7 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART7CLKSOURCE_D2PCLK1: APB1 Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL2: PLL2_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL3: PLL3_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_CSI: CSI Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock + */ +#define __HAL_RCC_UART7_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART7 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART7CLKSOURCE_D2PCLK1: APB1 Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL2: PLL2_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL3: PLL3_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_CSI: CSI Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock + */ +#define __HAL_RCC_GET_UART7_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART8 clock (UART8CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART8CLKSOURCE_D2PCLK1: APB1 Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL2: PLL2_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL3: PLL3_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_CSI: CSI Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock + */ +#define __HAL_RCC_UART8_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART8 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART8CLKSOURCE_D2PCLK1: APB1 Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL2: PLL2_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL3: PLL3_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_CSI: CSI Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock + */ +#define __HAL_RCC_GET_UART8_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +#if defined(UART9) +/** @brief macro to configure the UART9 clock (UART9CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART9CLKSOURCE_D2PCLK1: APB1 Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_PLL2: PLL2_Q Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_PLL3: PLL3_Q Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_HSI: HSI selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_CSI: CSI Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_LSE: LSE selected as UART9 clock + */ +#define __HAL_RCC_UART9_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the UART9 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART9CLKSOURCE_D2PCLK1: APB1 Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_PLL2: PLL2_Q Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_PLL3: PLL3_Q Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_HSI: HSI selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_CSI: CSI Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_LSE: LSE selected as UART9 clock + */ +#define __HAL_RCC_GET_UART9_SOURCE __HAL_RCC_GET_USART16_SOURCE +#endif /* UART9 */ + +#if defined(USART10) +/** @brief macro to configure the USART10 clock (USART10CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART10CLKSOURCE_D2PCLK1: APB1 Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL2: PLL2_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL3: PLL3_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_HSI: HSI selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_CSI: CSI Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_LSE: LSE selected as USART10 clock + */ +#define __HAL_RCC_USART10_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART10 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART10CLKSOURCE_D2PCLK1: APB1 Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL2: PLL2_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL3: PLL3_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_HSI: HSI selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_CSI: CSI Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_LSE: LSE selected as USART10 clock + */ +#define __HAL_RCC_GET_USART10_SOURCE __HAL_RCC_GET_USART16_SOURCE +#endif /* USART10 */ + +/** @brief macro to configure the LPUART1 clock (LPUART1CLK). + * + * @param __LPUART1CLKSource__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPUART1CLKSOURCE_D3PCLK1: APB4 Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL2: PLL2_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL3: PLL3_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_HSI: HSI selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_CSI: CSI Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_LSE: LSE selected as LPUART1 clock + */ +#if defined (RCC_D3CCIPR_LPUART1SEL) +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL, (uint32_t)(__LPUART1CLKSource__)) +#else +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL, (uint32_t)(__LPUART1CLKSource__)) +#endif /* RCC_D3CCIPR_LPUART1SEL */ + +/** @brief macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPUART1CLKSOURCE_D3PCLK1: APB4 Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL2: PLL2_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL3: PLL3_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_HSI: HSI selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_CSI: CSI Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_LSE: LSE selected as LPUART1 clock + */ +#if defined (RCC_D3CCIPR_LPUART1SEL) +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL))) +#else +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL))) +#endif /* RCC_D3CCIPR_LPUART1SEL */ + +/** @brief macro to configure the LPTIM1 clock source. + * + * @param __LPTIM1CLKSource__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_D2PCLK1: APB1 Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_CLKP: CLKP selected as LPTIM1 clock + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_LPTIM1SEL, (uint32_t)(__LPTIM1CLKSource__)) +#else +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_LPTIM1SEL, (uint32_t)(__LPTIM1CLKSource__)) +#endif /* RCC_D2CCIP2R_LPTIM1SEL */ + +/** @brief macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_D2PCLK1: APB1 Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_CLKP: CLKP selected as LPTIM1 clock + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_LPTIM1SEL))) +#else +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_LPTIM1SEL))) +#endif /* RCC_D2CCIP2R_LPTIM1SEL */ + +/** @brief macro to configure the LPTIM2 clock source. + * + * @param __LPTIM2CLKSource__ specifies the LPTIM2 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM2CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSE: LSE selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSI: LSI Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_CLKP: CLKP selected as LPTIM2 clock + */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2CLKSource__)) +#else +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2CLKSource__)) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ + +/** @brief macro to get the LPTIM2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM2CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSE: LSE selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSI: LSI Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_CLKP: CLKP selected as LPTIM2 clock + */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM2SEL))) +#else +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM2SEL))) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ + +/** @brief macro to configure the LPTIM3/4/5 clock source. + * + * @param __LPTIM345CLKSource__ specifies the LPTIM3/4/5 clock source. + * @arg RCC_LPTIM345CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSE: LSE selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSI: LSI Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_CLKP: CLKP selected as LPTIM3/4/5 clock + */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define __HAL_RCC_LPTIM345_CONFIG(__LPTIM345CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM345SEL, (uint32_t)(__LPTIM345CLKSource__)) +#else +#define __HAL_RCC_LPTIM345_CONFIG(__LPTIM345CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM3SEL, (uint32_t)(__LPTIM345CLKSource__)) +#endif /* RCC_D3CCIPR_LPTIM345SEL */ + +/** @brief macro to get the LPTIM3/4/5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM345CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSE: LSE selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSI: LSI Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_CLKP: CLKP selected as LPTIM3/4/5 clock + */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define __HAL_RCC_GET_LPTIM345_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM345SEL))) +#else +#define __HAL_RCC_GET_LPTIM345_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM3SEL))) +#endif /* RCC_D3CCIPR_LPTIM345SEL */ + +/** @brief macro to configure the LPTIM3 clock source. + * + * @param __LPTIM3CLKSource__ specifies the LPTIM3 clock source. + * @arg RCC_LPTIM3CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSE: LSE selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSI: LSI Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_CLKP: CLKP selected as LPTIM3 clock + */ +#define __HAL_RCC_LPTIM3_CONFIG __HAL_RCC_LPTIM345_CONFIG + +/** @brief macro to get the LPTIM3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM3CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSE: LSE selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSI: LSI Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_CLKP: CLKP selected as LPTIM3 clock + */ +#define __HAL_RCC_GET_LPTIM3_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE + +#if defined(LPTIM4) +/** @brief macro to configure the LPTIM4 clock source. + * + * @param __LPTIM4CLKSource__ specifies the LPTIM4 clock source. + * @arg RCC_LPTIM4CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSE: LSE selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSI: LSI Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_CLKP: CLKP selected as LPTIM4 clock + */ +#define __HAL_RCC_LPTIM4_CONFIG __HAL_RCC_LPTIM345_CONFIG + + +/** @brief macro to get the LPTIM4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM4CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSE: LSE selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSI: LSI Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_CLKP: CLKP selected as LPTIM4 clock + */ +#define __HAL_RCC_GET_LPTIM4_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE +#endif /* LPTIM4 */ + +#if defined(LPTIM5) +/** @brief macro to configure the LPTIM5 clock source. + * + * @param __LPTIM5CLKSource__ specifies the LPTIM5 clock source. + * @arg RCC_LPTIM5CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSE: LSE selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSI: LSI Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_CLKP: CLKP selected as LPTIM5 clock + */ +#define __HAL_RCC_LPTIM5_CONFIG __HAL_RCC_LPTIM345_CONFIG + + +/** @brief macro to get the LPTIM5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM5CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSE: LSE selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSI: LSI Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_CLKP: CLKP selected as LPTIM5 clock + */ +#define __HAL_RCC_GET_LPTIM5_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE +#endif /* LPTIM5 */ + +#if defined(QUADSPI) +/** @brief macro to configure the QSPI clock source. + * + * @param __QSPICLKSource__ specifies the QSPI clock source. + * @arg RCC_RCC_QSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL : PLL1_Q Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL2 : PLL2_R Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_CLKP CLKP selected as QSPI clock + */ +#define __HAL_RCC_QSPI_CONFIG(__QSPICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL, (uint32_t)(__QSPICLKSource__)) + + +/** @brief macro to get the QSPI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_QSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL : PLL1_Q Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL2 : PLL2_R Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_CLKP CLKP selected as QSPI clock + */ +#define __HAL_RCC_GET_QSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL))) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @brief macro to configure the OSPI clock source. + * + * @param __OSPICLKSource__ specifies the OSPI clock source. + * @arg RCC_RCC_OSPICLKSOURCE_CDHCLK: Domain1 HCLK Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL : PLL1_Q Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL2 : PLL2_R Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_CLKP CLKP selected as OSPI clock + */ +#if defined(RCC_CDCCIPR_OCTOSPISEL) +#define __HAL_RCC_OSPI_CONFIG(__OSPICLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL, (uint32_t)(__OSPICLKSource__)) +#else +#define __HAL_RCC_OSPI_CONFIG(__OSPICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL, (uint32_t)(__OSPICLKSource__)) +#endif /* RCC_CDCCIPR_OCTOSPISEL */ + +/** @brief macro to get the OSPI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_OSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL : PLL1_Q Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL2 : PLL2_R Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_CLKP CLKP selected as OSPI clock + */ +#if defined(RCC_CDCCIPR_OCTOSPISEL) +#define __HAL_RCC_GET_OSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL))) +#else +#define __HAL_RCC_GET_OSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL))) +#endif /* RCC_CDCCIPR_OCTOSPISEL */ +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ + + +#if defined(DSI) +/** @brief macro to configure the DSI clock source. + * + * @param __DSICLKSource__ specifies the DSI clock source. + * @arg RCC_RCC_DSICLKSOURCE_PHY:DSI clock from PHY is selected as DSI byte lane clock + * @arg RCC_RCC_DSICLKSOURCE_PLL2 : PLL2_Q Clock clock is selected as DSI byte lane clock + */ +#define __HAL_RCC_DSI_CONFIG(__DSICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL, (uint32_t)(__DSICLKSource__)) + + +/** @brief macro to get the DSI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_DSICLKSOURCE_PHY: DSI clock from PHY is selected as DSI byte lane clock + * @arg RCC_RCC_DSICLKSOURCE_PLL2: PLL2_Q Clock clock is selected as DSI byte lane clock + */ +#define __HAL_RCC_GET_DSI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL))) +#endif /*DSI*/ + +/** @brief macro to configure the FMC clock source. + * + * @param __FMCCLKSource__ specifies the FMC clock source. + * @arg RCC_RCC_FMCCLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL : PLL1_Q Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL2 : PLL2_R Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_CLKP CLKP selected as FMC clock + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define __HAL_RCC_FMC_CONFIG(__FMCCLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL, (uint32_t)(__FMCCLKSource__)) +#else +#define __HAL_RCC_FMC_CONFIG(__FMCCLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL, (uint32_t)(__FMCCLKSource__)) +#endif /* RCC_D1CCIPR_FMCSEL */ + +/** @brief macro to get the FMC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_FMCCLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL : PLL1_Q Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL2 : PLL2_R Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_CLKP CLKP selected as FMC clock + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define __HAL_RCC_GET_FMC_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL))) +#else +#define __HAL_RCC_GET_FMC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL))) +#endif /* RCC_D1CCIPR_FMCSEL */ + +/** @brief Macro to configure the USB clock (USBCLK). + * @param __USBCLKSource__ specifies the USB clock source. + * This parameter can be one of the following values: + * @arg RCC_USBCLKSOURCE_PLL: PLL1Q selected as USB clock + * @arg RCC_USBCLKSOURCE_PLL3: PLL3Q Clock selected as USB clock + * @arg RCC_USBCLKSOURCE_HSI48: RC48 MHZ Clock selected as USB clock + */ +#if defined(RCC_D2CCIP2R_USBSEL) +#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL, (uint32_t)(__USBCLKSource__)) +#else +#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL, (uint32_t)(__USBCLKSource__)) +#endif /* RCC_D2CCIP2R_USBSEL */ + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USBCLKSOURCE_PLL: PLL1Q selected as USB clock + * @arg RCC_USBCLKSOURCE_PLL3: PLL3Q Clock selected as USB clock + * @arg RCC_USBCLKSOURCE_HSI48: RC48 MHZ Clock selected as USB clock + */ +#if defined(RCC_D2CCIP2R_USBSEL) +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL))) +#else +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL))) +#endif /* RCC_D2CCIP2R_USBSEL */ + +/** @brief Macro to configure the ADC clock + * @param __ADCCLKSource__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_ADCCLKSOURCE_PLL2: PLL2_P Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_PLL3: PLL3_R Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_CLKP: CLKP Clock selected as ADC clock + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define __HAL_RCC_ADC_CONFIG(__ADCCLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL, (uint32_t)(__ADCCLKSource__)) +#else +#define __HAL_RCC_ADC_CONFIG(__ADCCLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL, (uint32_t)(__ADCCLKSource__)) +#endif /* RCC_D3CCIPR_ADCSEL */ + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_ADCCLKSOURCE_PLL2: PLL2_P Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_PLL3: PLL3_R Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_CLKP: CLKP Clock selected as ADC clock + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL))) +#else +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL))) +#endif /* RCC_D3CCIPR_ADCSEL */ + +/** @brief Macro to configure the SWPMI1 clock + * @param __SWPMI1CLKSource__ specifies the SWPMI1 clock source. + * This parameter can be one of the following values: + * @arg RCC_SWPMI1CLKSOURCE_D2PCLK1: D2PCLK1 Clock selected as SWPMI1 clock + * @arg RCC_SWPMI1CLKSOURCE_HSI: HSI Clock selected as SWPMI1 clock + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL, (uint32_t)(__SWPMI1CLKSource__)) +#else +#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL, (uint32_t)(__SWPMI1CLKSource__)) +#endif /* RCC_D2CCIP1R_SWPSEL */ + +/** @brief Macro to get the SWPMI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SWPMI1CLKSOURCE_D2PCLK1: D2PCLK1 Clock selected as SWPMI1 clock + * @arg RCC_SWPMI1CLKSOURCE_HSI: HSI Clock selected as SWPMI1 clock + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define __HAL_RCC_GET_SWPMI1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL))) +#else +#define __HAL_RCC_GET_SWPMI1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL))) +#endif /* RCC_D2CCIP1R_SWPSEL */ + +/** @brief Macro to configure the DFSDM1 clock + * @param __DFSDM1CLKSource__ specifies the DFSDM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM1CLKSOURCE_D2PCLK: D2PCLK Clock selected as DFSDM1 clock + * @arg RCC_DFSDM1CLKSOURCE_SYS: System Clock selected as DFSDM1 clock + */ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL, (uint32_t)(__DFSDM1CLKSource__)) +#else +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL, (uint32_t)(__DFSDM1CLKSource__)) +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ + +/** @brief Macro to get the DFSDM1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM1CLKSOURCE_D2PCLK: D2PCLK Clock selected as DFSDM1 clock + * @arg RCC_DFSDM1CLKSOURCE_SYS: System Clock selected as DFSDM1 clock + */ +#if defined (RCC_D2CCIP1R_DFSDM1SEL) +#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL))) +#else +#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL))) +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ + +#if defined(DFSDM2_BASE) +/** @brief Macro to configure the DFSDM2 clock + * @param __DFSDM2CLKSource__ specifies the DFSDM2 clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM2CLKSOURCE_SRDPCLK1: SRDPCLK1 (APB4) selected as DFSDM2 clock + * @arg RCC_DFSDM2CLKSOURCE_SYS: System Clock selected as DFSDM2 clock + */ +#define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL, (uint32_t)(__DFSDM2CLKSource__)) + +/** @brief Macro to get the DFSDM2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM2CLKSOURCE_SRDPCLK1: SRDPCLK1 (APB4) Clock selected as DFSDM2 clock + * @arg RCC_DFSDM2CLKSOURCE_SYS: System Clock selected as DFSDM2 clock + */ +#define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL))) +#endif /* DFSDM2 */ + +/** @brief macro to configure the CEC clock (CECCLK). + * + * @param __CECCLKSource__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSI: LSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_CSI: CSI Clock selected as CEC clock + */ +#if defined(RCC_D2CCIP2R_CECSEL) +#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL, (uint32_t)(__CECCLKSource__)) +#else +#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL, (uint32_t)(__CECCLKSource__)) +#endif /* RCC_D2CCIP2R_CECSEL */ + +/** @brief macro to get the CEC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSI: LSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_CSI: CSI Clock selected as CEC clock + */ +#if defined(RCC_D2CCIP2R_CECSEL) +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL))) +#else +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL))) +#endif /* RCC_D2CCIP2R_CECSEL */ + +/** @brief Macro to configure the CLKP : Oscillator clock for peripheral + * @param __CLKPSource__ specifies Oscillator clock for peripheral + * This parameter can be one of the following values: + * @arg RCC_CLKPSOURCE_HSI: HSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_CSI: CSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_HSE: HSE selected Oscillator clock for peripheral + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define __HAL_RCC_CLKP_CONFIG(__CLKPSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL, (uint32_t)(__CLKPSource__)) +#else +#define __HAL_RCC_CLKP_CONFIG(__CLKPSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL, (uint32_t)(__CLKPSource__)) +#endif /* RCC_D1CCIPR_CKPERSEL */ + +/** @brief Macro to get the Oscillator clock for peripheral source. + * @retval The clock source can be one of the following values: + * @arg RCC_CLKPSOURCE_HSI: HSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_CSI: CSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_HSE: HSE selected Oscillator clock for peripheral + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define __HAL_RCC_GET_CLKP_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL))) +#else +#define __HAL_RCC_GET_CLKP_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL))) +#endif /* RCC_D1CCIPR_CKPERSEL */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @brief Macro to configure the FDCAN clock + * @param __FDCANCLKSource__ specifies clock source for FDCAN + * This parameter can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_HSE: HSE selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL: PLL selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL2: PLL2 selected as FDCAN clock + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define __HAL_RCC_FDCAN_CONFIG(__FDCANCLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL, (uint32_t)(__FDCANCLKSource__)) +#else +#define __HAL_RCC_FDCAN_CONFIG(__FDCANCLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL, (uint32_t)(__FDCANCLKSource__)) +#endif /* RCC_D2CCIP1R_FDCANSEL */ + +/** @brief Macro to get the FDCAN clock + * @retval The clock source can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_HSE: HSE selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL: PLL selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL2: PLL2 selected as FDCAN clock + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL))) +#else +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL))) +#endif /* RCC_D2CCIP1R_FDCANSEL */ + +#endif /*FDCAN1 || FDCAN2*/ + +/** + * @brief Macro to Configure the SPI1/2/3 clock source. + * @param __RCC_SPI123CLKSource__ defines the SPI1/2/3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI123CLKSOURCE_PLL: SPI1/2/3 clock = PLL + * @arg RCC_SPI123CLKSOURCE_PLL2: SPI1/2/3 clock = PLL2 + * @arg RCC_SPI123CLKSOURCE_PLL3: SPI1/2/3 clock = PLL3 + * @arg RCC_SPI123CLKSOURCE_CLKP: SPI1/2/3 clock = CLKP + * @arg RCC_SPI123CLKSOURCE_PIN: SPI1/2/3 clock = External Clock + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define __HAL_RCC_SPI123_CONFIG(__RCC_SPI123CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI123SEL, (__RCC_SPI123CLKSource__)) +#else +#define __HAL_RCC_SPI123_CONFIG(__RCC_SPI123CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI123SEL, (__RCC_SPI123CLKSource__)) +#endif /* RCC_D2CCIP1R_SPI123SEL */ + +/** @brief Macro to get the SPI1/2/3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI123CLKSOURCE_PLL: SPI1/2/3 clock = PLL + * @arg RCC_SPI123CLKSOURCE_PLL2: SPI1/2/3 clock = PLL2 + * @arg RCC_SPI123CLKSOURCE_PLL3: SPI1/2/3 clock = PLL3 + * @arg RCC_SPI123CLKSOURCE_CLKP: SPI1/2/3 clock = CLKP + * @arg RCC_SPI123CLKSOURCE_PIN: SPI1/2/3 clock = External Clock + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define __HAL_RCC_GET_SPI123_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI123SEL))) +#else +#define __HAL_RCC_GET_SPI123_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI123SEL))) +#endif /* RCC_D2CCIP1R_SPI123SEL */ + +/** + * @brief Macro to Configure the SPI1 clock source. + * @param __RCC_SPI1CLKSource__ defines the SPI1 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI1CLKSOURCE_PLL: SPI1 clock = PLL + * @arg RCC_SPI1CLKSOURCE_PLL2: SPI1 clock = PLL2 + * @arg RCC_SPI1CLKSOURCE_PLL3: SPI1 clock = PLL3 + * @arg RCC_SPI1CLKSOURCE_CLKP: SPI1 clock = CLKP + * @arg RCC_SPI1CLKSOURCE_PIN: SPI1 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI1_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI1CLKSOURCE_PLL: SPI1 clock = PLL + * @arg RCC_SPI1CLKSOURCE_PLL2: SPI1 clock = PLL2 + * @arg RCC_SPI1CLKSOURCE_PLL3: SPI1 clock = PLL3 + * @arg RCC_SPI1CLKSOURCE_CLKP: SPI1 clock = CLKP + * @arg RCC_SPI1CLKSOURCE_PIN: SPI1 clock = External Clock + */ +#define __HAL_RCC_GET_SPI1_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI2 clock source. + * @param __RCC_SPI2CLKSource__ defines the SPI2 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI2CLKSOURCE_PLL: SPI2 clock = PLL + * @arg RCC_SPI2CLKSOURCE_PLL2: SPI2 clock = PLL2 + * @arg RCC_SPI2CLKSOURCE_PLL3: SPI2 clock = PLL3 + * @arg RCC_SPI2CLKSOURCE_CLKP: SPI2 clock = CLKP + * @arg RCC_SPI2CLKSOURCE_PIN: SPI2 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI2_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI2CLKSOURCE_PLL: SPI2 clock = PLL + * @arg RCC_SPI2CLKSOURCE_PLL2: SPI2 clock = PLL2 + * @arg RCC_SPI2CLKSOURCE_PLL3: SPI2 clock = PLL3 + * @arg RCC_SPI2CLKSOURCE_CLKP: SPI2 clock = CLKP + * @arg RCC_SPI2CLKSOURCE_PIN: SPI2 clock = External Clock + */ +#define __HAL_RCC_GET_SPI2_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI3 clock source. + * @param __RCC_SPI3CLKSource__ defines the SPI3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI3CLKSOURCE_PLL: SPI3 clock = PLL + * @arg RCC_SPI3CLKSOURCE_PLL2: SPI3 clock = PLL2 + * @arg RCC_SPI3CLKSOURCE_PLL3: SPI3 clock = PLL3 + * @arg RCC_SPI3CLKSOURCE_CLKP: SPI3 clock = CLKP + * @arg RCC_SPI3CLKSOURCE_PIN: SPI3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI3_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI3CLKSOURCE_PLL: SPI3 clock = PLL + * @arg RCC_SPI3CLKSOURCE_PLL2: SPI3 clock = PLL2 + * @arg RCC_SPI3CLKSOURCE_PLL3: SPI3 clock = PLL3 + * @arg RCC_SPI3CLKSOURCE_CLKP: SPI3 clock = CLKP + * @arg RCC_SPI3CLKSOURCE_PIN: SPI3 clock = External Clock + */ +#define __HAL_RCC_GET_SPI3_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI4/5 clock source. + * @param __RCC_SPI45CLKSource__ defines the SPI4/5 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI45CLKSOURCE_D2PCLK2:SPI4/5 clock = D2PCLK2 + * @arg RCC_SPI45CLKSOURCE_PLL2: SPI4/5 clock = PLL2 + * @arg RCC_SPI45CLKSOURCE_PLL3: SPI4/5 clock = PLL3 + * @arg RCC_SPI45CLKSOURCE_HSI: SPI4/5 clock = HSI + * @arg RCC_SPI45CLKSOURCE_CSI: SPI4/5 clock = CSI + * @arg RCC_SPI45CLKSOURCE_HSE: SPI4/5 clock = HSE + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define __HAL_RCC_SPI45_CONFIG(__RCC_SPI45CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI45SEL, (__RCC_SPI45CLKSource__)) +#else +#define __HAL_RCC_SPI45_CONFIG(__RCC_SPI45CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI45SEL, (__RCC_SPI45CLKSource__)) +#endif /* RCC_D2CCIP1R_SPI45SEL */ + +/** @brief Macro to get the SPI4/5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI45CLKSOURCE_D2PCLK2:SPI4/5 clock = D2PCLK2 + * @arg RCC_SPI45CLKSOURCE_PLL2: SPI4/5 clock = PLL2 + * @arg RCC_SPI45CLKSOURCE_PLL3: SPI4/5 clock = PLL3 + * @arg RCC_SPI45CLKSOURCE_HSI: SPI4/5 clock = HSI + * @arg RCC_SPI45CLKSOURCE_CSI: SPI4/5 clock = CSI + * @arg RCC_SPI45CLKSOURCE_HSE: SPI4/5 clock = HSE +*/ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define __HAL_RCC_GET_SPI45_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI45SEL))) +#else +#define __HAL_RCC_GET_SPI45_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI45SEL))) +#endif /* RCC_D2CCIP1R_SPI45SEL */ + +/** + * @brief Macro to Configure the SPI4 clock source. + * @param __RCC_SPI4CLKSource__ defines the SPI4 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI4CLKSOURCE_D2PCLK2:SPI4 clock = D2PCLK2 + * @arg RCC_SPI4CLKSOURCE_PLL2: SPI4 clock = PLL2 + * @arg RCC_SPI4CLKSOURCE_PLL3: SPI4 clock = PLL3 + * @arg RCC_SPI4CLKSOURCE_HSI: SPI4 clock = HSI + * @arg RCC_SPI4CLKSOURCE_CSI: SPI4 clock = CSI + * @arg RCC_SPI4CLKSOURCE_HSE: SPI4 clock = HSE + * @retval None + */ +#define __HAL_RCC_SPI4_CONFIG __HAL_RCC_SPI45_CONFIG + +/** @brief Macro to get the SPI4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI4CLKSOURCE_D2PCLK2:SPI4 clock = D2PCLK2 + * @arg RCC_SPI4CLKSOURCE_PLL2: SPI4 clock = PLL2 + * @arg RCC_SPI4CLKSOURCE_PLL3: SPI4 clock = PLL3 + * @arg RCC_SPI4CLKSOURCE_HSI: SPI4 clock = HSI + * @arg RCC_SPI4CLKSOURCE_CSI: SPI4 clock = CSI + * @arg RCC_SPI4CLKSOURCE_HSE: SPI4 clock = HSE +*/ +#define __HAL_RCC_GET_SPI4_SOURCE __HAL_RCC_GET_SPI45_SOURCE + +/** + * @brief Macro to Configure the SPI5 clock source. + * @param __RCC_SPI5CLKSource__ defines the SPI5 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI5CLKSOURCE_D2PCLK2:SPI5 clock = D2PCLK2 + * @arg RCC_SPI5CLKSOURCE_PLL2: SPI5 clock = PLL2 + * @arg RCC_SPI5CLKSOURCE_PLL3: SPI5 clock = PLL3 + * @arg RCC_SPI5CLKSOURCE_HSI: SPI5 clock = HSI + * @arg RCC_SPI5CLKSOURCE_CSI: SPI5 clock = CSI + * @arg RCC_SPI5CLKSOURCE_HSE: SPI5 clock = HSE + * @retval None + */ +#define __HAL_RCC_SPI5_CONFIG __HAL_RCC_SPI45_CONFIG + +/** @brief Macro to get the SPI5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI5CLKSOURCE_D2PCLK2:SPI5 clock = D2PCLK2 + * @arg RCC_SPI5CLKSOURCE_PLL2: SPI5 clock = PLL2 + * @arg RCC_SPI5CLKSOURCE_PLL3: SPI5 clock = PLL3 + * @arg RCC_SPI5CLKSOURCE_HSI: SPI5 clock = HSI + * @arg RCC_SPI5CLKSOURCE_CSI: SPI5 clock = CSI + * @arg RCC_SPI5CLKSOURCE_HSE: SPI5 clock = HSE +*/ +#define __HAL_RCC_GET_SPI5_SOURCE __HAL_RCC_GET_SPI45_SOURCE + +/** + * @brief Macro to Configure the SPI6 clock source. + * @param __RCC_SPI6CLKSource__ defines the SPI6 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI6CLKSOURCE_D3PCLK1:SPI6 clock = D2PCLK1 + * @arg RCC_SPI6CLKSOURCE_PLL2: SPI6 clock = PLL2 + * @arg RCC_SPI6CLKSOURCE_PLL3: SPI6 clock = PLL3 + * @arg RCC_SPI6CLKSOURCE_HSI: SPI6 clock = HSI + * @arg RCC_SPI6CLKSOURCE_CSI: SPI6 clock = CSI + * @arg RCC_SPI6CLKSOURCE_HSE: SPI6 clock = HSE + * @arg RCC_SPI6CLKSOURCE_PIN: SPI6 clock = I2S_CKIN (*) + * + * @retval None + * + * (*) : Available on stm32h7a3xx and stm32h7b3xx family lines. + * + */ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define __HAL_RCC_SPI6_CONFIG(__RCC_SPI6CLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SPI6SEL, (__RCC_SPI6CLKSource__)) +#else +#define __HAL_RCC_SPI6_CONFIG(__RCC_SPI6CLKSource__ )\ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_SPI6SEL, (__RCC_SPI6CLKSource__)) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +/** @brief Macro to get the SPI6 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI6CLKSOURCE_D3PCLK1:SPI6 clock = D2PCLK1 + * @arg RCC_SPI6CLKSOURCE_PLL2: SPI6 clock = PLL2 + * @arg RCC_SPI6CLKSOURCE_PLL3: SPI6 clock = PLL3 + * @arg RCC_SPI6CLKSOURCE_HSI: SPI6 clock = HSI + * @arg RCC_SPI6CLKSOURCE_CSI: SPI6 clock = CSI + * @arg RCC_SPI6CLKSOURCE_HSE: SPI6 clock = HSE + * @arg RCC_SPI6CLKSOURCE_PIN: SPI6 clock = I2S_CKIN +*/ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define __HAL_RCC_GET_SPI6_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SPI6SEL))) +#else +#define __HAL_RCC_GET_SPI6_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_SPI6SEL))) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +/** @brief Macro to configure the SDMMC clock + * @param __SDMMCCLKSource__ specifies clock source for SDMMC + * This parameter can be one of the following values: + * @arg RCC_SDMMCCLKSOURCE_PLL: PLLQ selected as SDMMC clock + * @arg RCC_SDMMCCLKSOURCE_PLL2: PLL2R selected as SDMMC clock + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define __HAL_RCC_SDMMC_CONFIG(__SDMMCCLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL, (uint32_t)(__SDMMCCLKSource__)) +#else +#define __HAL_RCC_SDMMC_CONFIG(__SDMMCCLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL, (uint32_t)(__SDMMCCLKSource__)) +#endif /* RCC_D1CCIPR_SDMMCSEL */ + +/** @brief Macro to get the SDMMC clock + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define __HAL_RCC_GET_SDMMC_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL))) +#else +#define __HAL_RCC_GET_SDMMC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL))) +#endif /* RCC_D1CCIPR_SDMMCSEL */ + +/** @brief macro to configure the RNG clock (RNGCLK). + * + * @param __RNGCLKSource__ specifies the RNG clock source. + * This parameter can be one of the following values: + * @arg RCC_RNGCLKSOURCE_HSI48: HSI48 selected as RNG clock + * @arg RCC_RNGCLKSOURCE_PLL: PLL1Q selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSE: LSE selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSI: LSI selected as RNG clock + */ +#if defined(RCC_D2CCIP2R_RNGSEL) +#define __HAL_RCC_RNG_CONFIG(__RNGCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL, (uint32_t)(__RNGCLKSource__)) +#else +#define __HAL_RCC_RNG_CONFIG(__RNGCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL, (uint32_t)(__RNGCLKSource__)) +#endif /* RCC_D2CCIP2R_RNGSEL */ + +/** @brief macro to get the RNG clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RNGCLKSOURCE_HSI48: HSI48 selected as RNG clock + * @arg RCC_RNGCLKSOURCE_PLL: PLL1Q selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSE: LSE selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSI: LSI selected as RNG clock + */ +#if defined(RCC_D2CCIP2R_RNGSEL) +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL))) +#else +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL))) +#endif /* RCC_D2CCIP2R_RNGSEL */ + +#if defined(HRTIM1) +/** @brief Macro to configure the HRTIM1 prescaler clock source. + * @param __HRTIM1CLKSource__ specifies the HRTIM1 prescaler clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_HRTIM1CLK_TIMCLK Timers clock selected as HRTIM1 prescaler clock + * @arg @ref RCC_HRTIM1CLK_CPUCLK CPU Clock selected as HRTIM1 clock + */ +#define __HAL_RCC_HRTIM1_CONFIG(__HRTIM1CLKSource__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HRTIMSEL, (uint32_t)(__HRTIM1CLKSource__)) + +/** @brief Macro to get the HRTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_HRTIM1CLK_TIMCLK Timers clock selected as HRTIM1 prescaler clock + * @arg @ref RCC_HRTIM1CLK_CPUCLK CPU Clock selected as HRTIM1 clock + */ +#define __HAL_RCC_GET_HRTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HRTIMSEL))) +#endif /* HRTIM1 */ + +/** @brief Macro to configure the Timers clocks prescalers + * @param __PRESC__ specifies the Timers clocks prescalers selection + * This parameter can be one of the following values: + * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is + * equal to rcc_hclk1 if D2PPREx is corresponding to division by 1 or 2, + * else it is equal to 2 x Frcc_pclkx_d2 (default after reset) + * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is + * equal to rcc_hclk1 if D2PPREx is corresponding to division by 1, 2 or 4, + * else it is equal to 4 x Frcc_pclkx_d2 + */ +#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) do {RCC->CFGR &= ~(RCC_CFGR_TIMPRE);\ + RCC->CFGR |= (__PRESC__); \ + }while(0) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +#if defined(DUAL_CORE) +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line for CM4. + * @retval None + */ +#define __HAL_RCC_C2_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->C2IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line for CM4. + * @retval None + */ +#define __HAL_RCC_C2_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->C2IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->C2EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->C2EMR1, RCC_EXTI_LINE_LSECSS) +#endif /* DUAL_CORE */ + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, RCC_EXTI_LINE_LSECSS) + +#if defined(DUAL_CORE) +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not for CM4. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->C2PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag or not for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->C2PR1, RCC_EXTI_LINE_LSECSS) +#endif /* DUAL_CORE */ +/** + * @brief Generate a Software interrupt on the RCC LSE CSS EXTI line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS)) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after pre-scaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + + +/** + * @} + */ + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint64_t PeriphClk); +uint32_t HAL_RCCEx_GetD1PCLK1Freq(void); +uint32_t HAL_RCCEx_GetD3PCLK1Freq(void); +uint32_t HAL_RCCEx_GetD1SysClockFreq(void); +void HAL_RCCEx_GetPLL1ClockFreq(PLL1_ClocksTypeDef *PLL1_Clocks); +void HAL_RCCEx_GetPLL2ClockFreq(PLL2_ClocksTypeDef *PLL2_Clocks); +void HAL_RCCEx_GetPLL3ClockFreq(PLL3_ClocksTypeDef *PLL3_Clocks); +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_KerWakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_EnableLSECSS(void); +void HAL_RCCEx_DisableLSECSS(void); +void HAL_RCCEx_EnableLSECSS_IT(void); +void HAL_RCCEx_LSECSS_IRQHandler(void); +void HAL_RCCEx_LSECSS_Callback(void); +#if defined(DUAL_CORE) +void HAL_RCCEx_EnableBootCore(uint32_t RCC_BootCx); +#endif /*DUAL_CORE*/ +#if defined(RCC_GCR_WW1RSC) +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx); +#endif /*RCC_GCR_WW1RSC*/ +/** + * @} + */ + + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ + +#define IS_RCC_PLL2CLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL2_DIVP) || \ + ((VALUE) == RCC_PLL2_DIVQ) || \ + ((VALUE) == RCC_PLL2_DIVR)) + +#define IS_RCC_PLL3CLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL3_DIVP) || \ + ((VALUE) == RCC_PLL3_DIVQ) || \ + ((VALUE) == RCC_PLL3_DIVR)) + +#if defined(RCC_D2CCIP2R_USART16SEL) +#define IS_RCC_USART16CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART16CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_HSI)) +#else +#define IS_RCC_USART16CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART16CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_CDPCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_HSI)) +/* alias*/ +#define IS_RCC_USART16910CLKSOURCE IS_RCC_USART16CLKSOURCE +#endif /* RCC_D2CCIP2R_USART16SEL */ + +#if defined(RCC_D2CCIP2R_USART28SEL) +#define IS_RCC_USART234578CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART234578CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_HSI)) +#else +#define IS_RCC_USART234578CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART234578CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CDPCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_HSI)) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_HSI)) + +#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART2CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_HSI)) + +#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART3CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_HSI)) + +#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_HSI)) + +#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_HSI)) + +#define IS_RCC_USART6CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART6CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART6CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_HSI)) + +#define IS_RCC_UART7CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART7CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_HSI)) + +#define IS_RCC_UART8CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART8CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_HSI)) + +#if defined(UART9) +#define IS_RCC_UART9CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART9CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_UART9CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_HSI)) +#endif + +#if defined(USART10) +#define IS_RCC_USART10CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART10CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART10CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_HSI)) +#endif + +#define IS_RCC_LPUART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPUART1CLKSOURCE_D3PCLK1) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_HSI)) + +#if defined(I2C5) +#define IS_RCC_I2C1235CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1235CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_CSI)) + +#define IS_RCC_I2C123CLKSOURCE IS_RCC_I2C1235CLKSOURCE /* For API Backward compatibility */ +#else +#define IS_RCC_I2C123CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C123CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C123CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C123CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C123CLKSOURCE_CSI)) +#endif /*I2C5*/ + +#define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C1CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C1CLKSOURCE_CSI)) + +#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C2CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C2CLKSOURCE_CSI)) + +#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C3CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C3CLKSOURCE_CSI)) + +#define IS_RCC_I2C4CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C4CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C4CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_I2C4CLKSOURCE_CSI)) + +#if defined(I2C5) +#define IS_RCC_I2C5CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C5CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C5CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C5CLKSOURCE_CSI)) +#endif /*I2C5*/ + +#define IS_RCC_RNGCLKSOURCE(SOURCE) (((SOURCE) == RCC_RNGCLKSOURCE_HSI48)|| \ + ((SOURCE) == RCC_RNGCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_RNGCLKSOURCE_LSE) || \ + ((SOURCE) == RCC_RNGCLKSOURCE_LSI)) + +#if defined(HRTIM1) +#define IS_RCC_HRTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_HRTIM1CLK_TIMCLK) || \ + ((SOURCE) == RCC_HRTIM1CLK_CPUCLK)) +#endif + +#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_USBCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USBCLKSOURCE_HSI48)) + +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) + +#if defined(SAI3) +#define IS_RCC_SAI23CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PIN)) + +#define IS_RCC_SAI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN)) + + +#define IS_RCC_SAI3CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PIN)) +#endif + +#if defined(RCC_CDCCIP1R_SAI2ASEL) +#define IS_RCC_SAI2ACLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_SPDIF)) +#endif + +#if defined(RCC_CDCCIP1R_SAI2BSEL) +#define IS_RCC_SAI2BCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_SPDIF)) +#endif + +#define IS_RCC_SPI123CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PIN)) + +#define IS_RCC_SPI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PIN)) + +#define IS_RCC_SPI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PIN)) + +#define IS_RCC_SPI3CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PIN)) + +#define IS_RCC_SPI45CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI45CLKSOURCE_D2PCLK2) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_HSE)) + +#define IS_RCC_SPI4CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI4CLKSOURCE_D2PCLK2) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_HSE)) + +#define IS_RCC_SPI5CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI5CLKSOURCE_D2PCLK2)|| \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_HSE)) + +#if defined(RCC_D3CCIPR_SPI6SEL) +#define IS_RCC_SPI6CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI6CLKSOURCE_D3PCLK1) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSE)) +#else +#define IS_RCC_SPI6CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI6CLKSOURCE_D3PCLK1) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PIN)) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +#if defined(SAI4) +#define IS_RCC_SAI4ACLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PIN)) + +#define IS_RCC_SAI4BCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PIN)) +#endif /*SAI4*/ + +#define IS_RCC_PLL3M_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 63U)) +#define IS_RCC_PLL3N_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 512U)) +#define IS_RCC_PLL3P_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL3Q_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL3R_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) + +#define IS_RCC_PLL2M_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 63U)) +#define IS_RCC_PLL2N_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 512U)) +#define IS_RCC_PLL2P_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL2Q_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL2R_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) + +#define IS_RCC_PLL2RGE_VALUE(VALUE) (((VALUE) == RCC_PLL2VCIRANGE_0) || \ + ((VALUE) == RCC_PLL2VCIRANGE_1) || \ + ((VALUE) == RCC_PLL2VCIRANGE_2) || \ + ((VALUE) == RCC_PLL2VCIRANGE_3)) + +#define IS_RCC_PLL3RGE_VALUE(VALUE) (((VALUE) == RCC_PLL3VCIRANGE_0) || \ + ((VALUE) == RCC_PLL3VCIRANGE_1) || \ + ((VALUE) == RCC_PLL3VCIRANGE_2) || \ + ((VALUE) == RCC_PLL3VCIRANGE_3)) + +#define IS_RCC_PLL2VCO_VALUE(VALUE) (((VALUE) == RCC_PLL2VCOWIDE) || \ + ((VALUE) == RCC_PLL2VCOMEDIUM)) + +#define IS_RCC_PLL3VCO_VALUE(VALUE) (((VALUE) == RCC_PLL3VCOWIDE) || \ + ((VALUE) == RCC_PLL3VCOMEDIUM)) + +#define IS_RCC_LPTIM1CLK(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM2CLK(SOURCE) (((SOURCE) == RCC_LPTIM2CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM345CLK(SOURCE) (((SOURCE) == RCC_LPTIM345CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM3CLK(SOURCE) (((SOURCE) == RCC_LPTIM3CLKSOURCE_D3PCLK1) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_CLKP)) + +#if defined(LPTIM4) +#define IS_RCC_LPTIM4CLK(SOURCE) (((SOURCE) == RCC_LPTIM4CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_CLKP)) +#endif /* LPTIM4*/ + +#if defined(LPTIM5) +#define IS_RCC_LPTIM5CLK(SOURCE) (((SOURCE) == RCC_LPTIM5CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_CLKP)) +#endif /*LPTIM5*/ + +#if defined(QUADSPI) +#define IS_RCC_QSPICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_QSPICLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_CLKP)) +#endif /*QUADSPI*/ + +#if defined(OCTOSPI1) || defined(OCTOSPI1) +#define IS_RCC_OSPICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_OSPICLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_CLKP)) +#endif /*OCTOSPI1 || OCTOSPI1*/ + +#if defined(DSI) +#define IS_RCC_DSICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_DSICLKSOURCE_PHY) || \ + ((__SOURCE__) == RCC_DSICLKSOURCE_PLL2)) +#endif /*DSI*/ + +#define IS_RCC_FMCCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_FMCCLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_CLKP)) + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_RCC_FDCANCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL2)) +#endif /*FDCAN1 || FDCAN2*/ + +#define IS_RCC_SDMMC(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMCCLKSOURCE_PLL2)) + +#define IS_RCC_ADCCLKSOURCE(SOURCE) (((SOURCE) == RCC_ADCCLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_ADCCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_ADCCLKSOURCE_CLKP)) + +#define IS_RCC_SWPMI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SWPMI1CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_SWPMI1CLKSOURCE_HSI)) + +#define IS_RCC_DFSDM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_DFSDM1CLKSOURCE_SYS)) + +#if defined(DFSDM2_BASE) +#define IS_RCC_DFSDM2CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM2CLKSOURCE_SRDPCLK1) || \ + ((SOURCE) == RCC_DFSDM2CLKSOURCE_SYS)) +#endif /*DFSDM2*/ + +#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE)(((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_HSI)) + +#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_LSE) || \ + ((SOURCE) == RCC_CECCLKSOURCE_LSI) || \ + ((SOURCE) == RCC_CECCLKSOURCE_CSI)) + +#define IS_RCC_CLKPSOURCE(SOURCE) (((SOURCE) == RCC_CLKPSOURCE_HSI) || \ + ((SOURCE) == RCC_CLKPSOURCE_CSI) || \ + ((SOURCE) == RCC_CLKPSOURCE_HSE)) +#define IS_RCC_TIMPRES(VALUE) \ + (((VALUE) == RCC_TIMPRES_DESACTIVATED) || \ + ((VALUE) == RCC_TIMPRES_ACTIVATED)) + +#if defined(DUAL_CORE) +#define IS_RCC_BOOT_CORE(CORE) (((CORE) == RCC_BOOT_C1) || \ + ((CORE) == RCC_BOOT_C2)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_RCC_SCOPE_WWDG(WWDG) (((WWDG) == RCC_WWDG1) || \ + ((WWDG) == RCC_WWDG2)) +#else +#define IS_RCC_SCOPE_WWDG(WWDG) ((WWDG) == RCC_WWDG1) + +#endif /*DUAL_CORE*/ + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB2) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB1) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_PIN)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) + +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x3FU)) + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_RCC_EX_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sai.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sai.h new file mode 100644 index 0000000..f9ca364 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sai.h @@ -0,0 +1,985 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sai.h + * @author MCD Application Team + * @brief Header file of SAI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_SAI_H +#define STM32H7xx_HAL_SAI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup SAI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SAI_Exported_Types SAI Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_SAI_STATE_RESET = 0x00U, /*!< SAI not yet initialized or disabled */ + HAL_SAI_STATE_READY = 0x01U, /*!< SAI initialized and ready for use */ + HAL_SAI_STATE_BUSY = 0x02U, /*!< SAI internal process is ongoing */ + HAL_SAI_STATE_BUSY_TX = 0x12U, /*!< Data transmission process is ongoing */ + HAL_SAI_STATE_BUSY_RX = 0x22U, /*!< Data reception process is ongoing */ +} HAL_SAI_StateTypeDef; + +/** + * @brief SAI Callback prototype + */ +typedef void (*SAIcallback)(void); + +/** @defgroup SAI_PDM_Structure_definition SAI PDM Structure definition + * @brief SAI PDM Init structure definition + * @{ + */ +typedef struct +{ + FunctionalState Activation; /*!< Enable/disable PDM interface */ + uint32_t MicPairsNbr; /*!< Specifies the number of microphone pairs used. + This parameter must be a number between Min_Data = 1 and Max_Data = 3. */ + uint32_t ClockEnable; /*!< Specifies which clock must be enabled. + This parameter can be a values combination of @ref SAI_PDM_ClockEnable */ +} SAI_PdmInitTypeDef; +/** + * @} + */ + +/** @defgroup SAI_Init_Structure_definition SAI Init Structure definition + * @brief SAI Init Structure definition + * @{ + */ +typedef struct +{ + uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode. + This parameter can be a value of @ref SAI_Block_Mode */ + + uint32_t Synchro; /*!< Specifies SAI Block synchronization + This parameter can be a value of @ref SAI_Block_Synchronization */ + + uint32_t SynchroExt; /*!< Specifies SAI external output synchronization, this setup is common + for BlockA and BlockB + This parameter can be a value of @ref SAI_Block_SyncExt + @note If both audio blocks of same SAI are used, this parameter has + to be set to the same value for each audio block */ + + uint32_t MckOutput; /*!< Specifies whether master clock output will be generated or not. + This parameter can be a value of @ref SAI_Block_MckOutput + @note This feature is only available on STM32H7xx Rev.B and above */ + + uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven. + This parameter can be a value of @ref SAI_Block_Output_Drive + @note This value has to be set before enabling the audio block + but after the audio block configuration. */ + + uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not. + This parameter can be a value of @ref SAI_Block_NoDivider + @note If bit NODIV in the SAI_xCR1 register is cleared, the frame length + should be aligned to a number equal to a power of 2, from 8 to 256. + If bit NODIV in the SAI_xCR1 register is set, the frame length can + take any of the values from 8 to 256. + @note The NODIV bit is the same as NOMCK bit in STM32H7xx rev.Y */ + + uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold. + This parameter can be a value of @ref SAI_Block_Fifo_Threshold */ + + uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling. + This parameter can be a value of @ref SAI_Audio_Frequency */ + + uint32_t Mckdiv; /*!< Specifies the master clock divider. + This parameter must be a number between Min_Data = 0 and Max_Data = 63. + @note This parameter is used only if AudioFrequency is set to + SAI_AUDIO_FREQUENCY_MCKDIV otherwise it is internally computed. */ + + uint32_t MckOverSampling; /*!< Specifies the master clock oversampling. + This parameter can be a value of @ref SAI_Block_Mck_OverSampling */ + + uint32_t MonoStereoMode; /*!< Specifies if the mono or stereo mode is selected. + This parameter can be a value of @ref SAI_Mono_Stereo_Mode */ + + uint32_t CompandingMode; /*!< Specifies the companding mode type. + This parameter can be a value of @ref SAI_Block_Companding_Mode */ + + uint32_t TriState; /*!< Specifies the companding mode type. + This parameter can be a value of @ref SAI_TRIState_Management */ + + SAI_PdmInitTypeDef PdmInit; /*!< Specifies the PDM configuration. */ + + /* This part of the structure is automatically filled if your are using the high level initialisation + function HAL_SAI_InitProtocol */ + + uint32_t Protocol; /*!< Specifies the SAI Block protocol. + This parameter can be a value of @ref SAI_Block_Protocol */ + + uint32_t DataSize; /*!< Specifies the SAI Block data size. + This parameter can be a value of @ref SAI_Block_Data_Size */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */ + + uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity. + This parameter can be a value of @ref SAI_Block_Clock_Strobing */ +} SAI_InitTypeDef; +/** + * @} + */ + +/** @defgroup SAI_Frame_Structure_definition SAI Frame Structure definition + * @brief SAI Frame Init structure definition + * @note For SPDIF and AC97 protocol, these parameters are not used (set by hardware). + * @{ + */ +typedef struct +{ + + uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame. + This parameter must be a number between Min_Data = 8 and Max_Data = 256. + @note If master clock MCLK_x pin is declared as an output, the frame length + should be aligned to a number equal to power of 2 in order to keep + in an audio frame, an integer number of MCLK pulses by bit Clock. */ + + uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length. + This Parameter specifies the length in number of bit clock (SCK + 1) + of the active level of FS signal in audio frame. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition. + This parameter can be a value of @ref SAI_Block_FS_Definition */ + + uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity. + This parameter can be a value of @ref SAI_Block_FS_Polarity */ + + uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset. + This parameter can be a value of @ref SAI_Block_FS_Offset */ + +} SAI_FrameInitTypeDef; +/** + * @} + */ + +/** @defgroup SAI_Slot_Structure_definition SAI Slot Structure definition + * @brief SAI Block Slot Init Structure definition + * @note For SPDIF protocol, these parameters are not used (set by hardware). + * @note For AC97 protocol, only SlotActive parameter is used (the others are set by hardware). + * @{ + */ +typedef struct +{ + uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot. + This parameter must be a number between Min_Data = 0 and Max_Data = 24 */ + + uint32_t SlotSize; /*!< Specifies the Slot Size. + This parameter can be a value of @ref SAI_Block_Slot_Size */ + + uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ + + uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated. + This parameter can be a value of @ref SAI_Block_Slot_Active */ +} SAI_SlotInitTypeDef; +/** + * @} + */ + +/** @defgroup SAI_Handle_Structure_definition SAI Handle Structure definition + * @brief SAI handle Structure definition + * @{ + */ +typedef struct __SAI_HandleTypeDef +{ + SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */ + + SAI_InitTypeDef Init; /*!< SAI communication parameters */ + + SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */ + + SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to SAI transfer Buffer */ + + uint16_t XferSize; /*!< SAI transfer size */ + + uint16_t XferCount; /*!< SAI transfer counter */ + + DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */ + + SAIcallback mutecallback; /*!< SAI mute callback */ + + void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler */ + + HAL_LockTypeDef Lock; /*!< SAI locking object */ + + __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */ + + __IO uint32_t ErrorCode; /*!< SAI Error code */ + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + void (*RxCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI receive complete callback */ + void (*RxHalfCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI receive half complete callback */ + void (*TxCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI transmit complete callback */ + void (*TxHalfCpltCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI transmit half complete callback */ + void (*ErrorCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI error callback */ + void (*MspInitCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI MSP init callback */ + void (*MspDeInitCallback)(struct __SAI_HandleTypeDef *hsai); /*!< SAI MSP de-init callback */ +#endif +} SAI_HandleTypeDef; +/** + * @} + */ + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +/** + * @brief SAI callback ID enumeration definition + */ +typedef enum +{ + HAL_SAI_RX_COMPLETE_CB_ID = 0x00U, /*!< SAI receive complete callback ID */ + HAL_SAI_RX_HALFCOMPLETE_CB_ID = 0x01U, /*!< SAI receive half complete callback ID */ + HAL_SAI_TX_COMPLETE_CB_ID = 0x02U, /*!< SAI transmit complete callback ID */ + HAL_SAI_TX_HALFCOMPLETE_CB_ID = 0x03U, /*!< SAI transmit half complete callback ID */ + HAL_SAI_ERROR_CB_ID = 0x04U, /*!< SAI error callback ID */ + HAL_SAI_MSPINIT_CB_ID = 0x05U, /*!< SAI MSP init callback ID */ + HAL_SAI_MSPDEINIT_CB_ID = 0x06U /*!< SAI MSP de-init callback ID */ +} HAL_SAI_CallbackIDTypeDef; + +/** + * @brief SAI callback pointer definition + */ +typedef void (*pSAI_CallbackTypeDef)(SAI_HandleTypeDef *hsai); +#endif + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SAI_Exported_Constants SAI Exported Constants + * @{ + */ + +/** @defgroup SAI_Error_Code SAI Error Code + * @{ + */ +#define HAL_SAI_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_SAI_ERROR_OVR 0x00000001U /*!< Overrun Error */ +#define HAL_SAI_ERROR_UDR 0x00000002U /*!< Underrun error */ +#define HAL_SAI_ERROR_AFSDET 0x00000004U /*!< Anticipated Frame synchronisation detection */ +#define HAL_SAI_ERROR_LFSDET 0x00000008U /*!< Late Frame synchronisation detection */ +#define HAL_SAI_ERROR_CNREADY 0x00000010U /*!< codec not ready */ +#define HAL_SAI_ERROR_WCKCFG 0x00000020U /*!< Wrong clock configuration */ +#define HAL_SAI_ERROR_TIMEOUT 0x00000040U /*!< Timeout error */ +#define HAL_SAI_ERROR_DMA 0x00000080U /*!< DMA error */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +#define HAL_SAI_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid callback error */ +#endif +/** + * @} + */ + +/** @defgroup SAI_Block_SyncExt SAI External synchronisation + * @{ + */ +#define SAI_SYNCEXT_DISABLE 0U +#define SAI_SYNCEXT_OUTBLOCKA_ENABLE 1U +#define SAI_SYNCEXT_OUTBLOCKB_ENABLE 2U +/** + * @} + */ + +/** @defgroup SAI_Block_MckOutput SAI Block Master Clock Output + * @{ + */ +#define SAI_MCK_OUTPUT_DISABLE 0x00000000U +#define SAI_MCK_OUTPUT_ENABLE SAI_xCR1_MCKEN +/** + * @} + */ + +/** @defgroup SAI_Protocol SAI Supported protocol + * @{ + */ +#define SAI_I2S_STANDARD 0U +#define SAI_I2S_MSBJUSTIFIED 1U +#define SAI_I2S_LSBJUSTIFIED 2U +#define SAI_PCM_LONG 3U +#define SAI_PCM_SHORT 4U +/** + * @} + */ + +/** @defgroup SAI_Protocol_DataSize SAI protocol data size + * @{ + */ +#define SAI_PROTOCOL_DATASIZE_16BIT 0U +#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED 1U +#define SAI_PROTOCOL_DATASIZE_24BIT 2U +#define SAI_PROTOCOL_DATASIZE_32BIT 3U +/** + * @} + */ + +/** @defgroup SAI_Audio_Frequency SAI Audio Frequency + * @{ + */ +#define SAI_AUDIO_FREQUENCY_192K 192000U +#define SAI_AUDIO_FREQUENCY_96K 96000U +#define SAI_AUDIO_FREQUENCY_48K 48000U +#define SAI_AUDIO_FREQUENCY_44K 44100U +#define SAI_AUDIO_FREQUENCY_32K 32000U +#define SAI_AUDIO_FREQUENCY_22K 22050U +#define SAI_AUDIO_FREQUENCY_16K 16000U +#define SAI_AUDIO_FREQUENCY_11K 11025U +#define SAI_AUDIO_FREQUENCY_8K 8000U +#define SAI_AUDIO_FREQUENCY_MCKDIV 0U +/** + * @} + */ + +/** @defgroup SAI_Block_Mck_OverSampling SAI Block Master Clock OverSampling + * @{ + */ +#define SAI_MCK_OVERSAMPLING_DISABLE 0x00000000U +#define SAI_MCK_OVERSAMPLING_ENABLE SAI_xCR1_OSR +/** + * @} + */ + +/** @defgroup SAI_PDM_ClockEnable SAI PDM Clock Enable + * @{ + */ +#define SAI_PDM_CLOCK1_ENABLE SAI_PDMCR_CKEN1 +#define SAI_PDM_CLOCK2_ENABLE SAI_PDMCR_CKEN2 +/** + * @} + */ + +/** @defgroup SAI_Block_Mode SAI Block Mode + * @{ + */ +#define SAI_MODEMASTER_TX 0x00000000U +#define SAI_MODEMASTER_RX SAI_xCR1_MODE_0 +#define SAI_MODESLAVE_TX SAI_xCR1_MODE_1 +#define SAI_MODESLAVE_RX (SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0) + +/** + * @} + */ + +/** @defgroup SAI_Block_Protocol SAI Block Protocol + * @{ + */ +#define SAI_FREE_PROTOCOL 0x00000000U +#define SAI_SPDIF_PROTOCOL SAI_xCR1_PRTCFG_0 +#define SAI_AC97_PROTOCOL SAI_xCR1_PRTCFG_1 +/** + * @} + */ + +/** @defgroup SAI_Block_Data_Size SAI Block Data Size + * @{ + */ +#define SAI_DATASIZE_8 SAI_xCR1_DS_1 +#define SAI_DATASIZE_10 (SAI_xCR1_DS_1 | SAI_xCR1_DS_0) +#define SAI_DATASIZE_16 SAI_xCR1_DS_2 +#define SAI_DATASIZE_20 (SAI_xCR1_DS_2 | SAI_xCR1_DS_0) +#define SAI_DATASIZE_24 (SAI_xCR1_DS_2 | SAI_xCR1_DS_1) +#define SAI_DATASIZE_32 (SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0) +/** + * @} + */ + +/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission + * @{ + */ +#define SAI_FIRSTBIT_MSB 0x00000000U +#define SAI_FIRSTBIT_LSB SAI_xCR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing + * @{ + */ +#define SAI_CLOCKSTROBING_FALLINGEDGE 0U +#define SAI_CLOCKSTROBING_RISINGEDGE 1U +/** + * @} + */ + +/** @defgroup SAI_Block_Synchronization SAI Block Synchronization + * @{ + */ +#define SAI_ASYNCHRONOUS 0U /*!< Asynchronous */ +#define SAI_SYNCHRONOUS 1U /*!< Synchronous with other block of same SAI */ +#define SAI_SYNCHRONOUS_EXT_SAI1 2U /*!< Synchronous with other SAI, SAI1 */ +#if defined(SAI2) +#define SAI_SYNCHRONOUS_EXT_SAI2 3U /*!< Synchronous with other SAI, SAI2 */ +#endif /* SAI2 */ +#if defined(SAI3) +#define SAI_SYNCHRONOUS_EXT_SAI3 4U /*!< Synchronous with other SAI, SAI3 */ +#endif /* SAI3 */ +#if defined(SAI4) +#define SAI_SYNCHRONOUS_EXT_SAI4 5U /*!< Synchronous with other SAI, SAI4 */ +#endif /* SAI4 */ +/** + * @} + */ + +/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLE 0x00000000U +#define SAI_OUTPUTDRIVE_ENABLE SAI_xCR1_OUTDRIV +/** + * @} + */ + +/** @defgroup SAI_Block_NoDivider SAI Block NoDivider + * @{ + */ +#define SAI_MASTERDIVIDER_ENABLE 0x00000000U +#define SAI_MASTERDIVIDER_DISABLE SAI_xCR1_NODIV +/** + * @} + */ + +/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition + * @{ + */ +#define SAI_FS_STARTFRAME 0x00000000U +#define SAI_FS_CHANNEL_IDENTIFICATION SAI_xFRCR_FSDEF +/** + * @} + */ + +/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity + * @{ + */ +#define SAI_FS_ACTIVE_LOW 0x00000000U +#define SAI_FS_ACTIVE_HIGH SAI_xFRCR_FSPOL +/** + * @} + */ + +/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset + * @{ + */ +#define SAI_FS_FIRSTBIT 0x00000000U +#define SAI_FS_BEFOREFIRSTBIT SAI_xFRCR_FSOFF +/** + * @} + */ + +/** @defgroup SAI_Block_Slot_Size SAI Block Slot Size + * @{ + */ +#define SAI_SLOTSIZE_DATASIZE 0x00000000U +#define SAI_SLOTSIZE_16B SAI_xSLOTR_SLOTSZ_0 +#define SAI_SLOTSIZE_32B SAI_xSLOTR_SLOTSZ_1 +/** + * @} + */ + +/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active + * @{ + */ +#define SAI_SLOT_NOTACTIVE 0x00000000U +#define SAI_SLOTACTIVE_0 0x00000001U +#define SAI_SLOTACTIVE_1 0x00000002U +#define SAI_SLOTACTIVE_2 0x00000004U +#define SAI_SLOTACTIVE_3 0x00000008U +#define SAI_SLOTACTIVE_4 0x00000010U +#define SAI_SLOTACTIVE_5 0x00000020U +#define SAI_SLOTACTIVE_6 0x00000040U +#define SAI_SLOTACTIVE_7 0x00000080U +#define SAI_SLOTACTIVE_8 0x00000100U +#define SAI_SLOTACTIVE_9 0x00000200U +#define SAI_SLOTACTIVE_10 0x00000400U +#define SAI_SLOTACTIVE_11 0x00000800U +#define SAI_SLOTACTIVE_12 0x00001000U +#define SAI_SLOTACTIVE_13 0x00002000U +#define SAI_SLOTACTIVE_14 0x00004000U +#define SAI_SLOTACTIVE_15 0x00008000U +#define SAI_SLOTACTIVE_ALL 0x0000FFFFU +/** + * @} + */ + +/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode + * @{ + */ +#define SAI_STEREOMODE 0x00000000U +#define SAI_MONOMODE SAI_xCR1_MONO +/** + * @} + */ + +/** @defgroup SAI_TRIState_Management SAI TRIState Management + * @{ + */ +#define SAI_OUTPUT_NOTRELEASED 0x00000000U +#define SAI_OUTPUT_RELEASED SAI_xCR2_TRIS +/** + * @} + */ + +/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold + * @{ + */ +#define SAI_FIFOTHRESHOLD_EMPTY 0x00000000U +#define SAI_FIFOTHRESHOLD_1QF SAI_xCR2_FTH_0 +#define SAI_FIFOTHRESHOLD_HF SAI_xCR2_FTH_1 +#define SAI_FIFOTHRESHOLD_3QF (SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0) +#define SAI_FIFOTHRESHOLD_FULL SAI_xCR2_FTH_2 +/** + * @} + */ + +/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode + * @{ + */ +#define SAI_NOCOMPANDING 0x00000000U +#define SAI_ULAW_1CPL_COMPANDING SAI_xCR2_COMP_1 +#define SAI_ALAW_1CPL_COMPANDING (SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0) +#define SAI_ULAW_2CPL_COMPANDING (SAI_xCR2_COMP_1 | SAI_xCR2_CPL) +#define SAI_ALAW_2CPL_COMPANDING (SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL) +/** + * @} + */ + +/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value + * @{ + */ +#define SAI_ZERO_VALUE 0x00000000U +#define SAI_LAST_SENT_VALUE SAI_xCR2_MUTEVAL +/** + * @} + */ + +/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition + * @{ + */ +#define SAI_IT_OVRUDR SAI_xIMR_OVRUDRIE +#define SAI_IT_MUTEDET SAI_xIMR_MUTEDETIE +#define SAI_IT_WCKCFG SAI_xIMR_WCKCFGIE +#define SAI_IT_FREQ SAI_xIMR_FREQIE +#define SAI_IT_CNRDY SAI_xIMR_CNRDYIE +#define SAI_IT_AFSDET SAI_xIMR_AFSDETIE +#define SAI_IT_LFSDET SAI_xIMR_LFSDETIE +/** + * @} + */ + +/** @defgroup SAI_Block_Flags_Definition SAI Block Flags Definition + * @{ + */ +#define SAI_FLAG_OVRUDR SAI_xSR_OVRUDR +#define SAI_FLAG_MUTEDET SAI_xSR_MUTEDET +#define SAI_FLAG_WCKCFG SAI_xSR_WCKCFG +#define SAI_FLAG_FREQ SAI_xSR_FREQ +#define SAI_FLAG_CNRDY SAI_xSR_CNRDY +#define SAI_FLAG_AFSDET SAI_xSR_AFSDET +#define SAI_FLAG_LFSDET SAI_xSR_LFSDET +/** + * @} + */ + +/** @defgroup SAI_Block_Fifo_Status_Level SAI Block Fifo Status Level + * @{ + */ +#define SAI_FIFOSTATUS_EMPTY 0x00000000U +#define SAI_FIFOSTATUS_LESS1QUARTERFULL 0x00010000U +#define SAI_FIFOSTATUS_1QUARTERFULL 0x00020000U +#define SAI_FIFOSTATUS_HALFFULL 0x00030000U +#define SAI_FIFOSTATUS_3QUARTERFULL 0x00040000U +#define SAI_FIFOSTATUS_FULL 0x00050000U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SAI_Exported_Macros SAI Exported Macros + * @brief macros to handle interrupts and specific configurations + * @{ + */ + +/** @brief Reset SAI handle state. + * @param __HANDLE__ specifies the SAI Handle. + * @retval None + */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SAI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET) +#endif + +/** @brief Enable the specified SAI interrupts. + * @param __HANDLE__ specifies the SAI Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable + * @arg SAI_IT_MUTEDET: Mute detection interrupt enable + * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable + * @arg SAI_IT_FREQ: FIFO request interrupt enable + * @arg SAI_IT_CNRDY: Codec not ready interrupt enable + * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable + * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable + * @retval None + */ +#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) + +/** @brief Disable the specified SAI interrupts. + * @param __HANDLE__ specifies the SAI Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable + * @arg SAI_IT_MUTEDET: Mute detection interrupt enable + * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable + * @arg SAI_IT_FREQ: FIFO request interrupt enable + * @arg SAI_IT_CNRDY: Codec not ready interrupt enable + * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable + * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable + * @retval None + */ +#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified SAI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SAI Handle. + * @param __INTERRUPT__ specifies the SAI interrupt source to check. + * This parameter can be one of the following values: + * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable + * @arg SAI_IT_MUTEDET: Mute detection interrupt enable + * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable + * @arg SAI_IT_FREQ: FIFO request interrupt enable + * @arg SAI_IT_CNRDY: Codec not ready interrupt enable + * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable + * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enable + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SAI flag is set or not. + * @param __HANDLE__ specifies the SAI Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SAI_FLAG_OVRUDR: Overrun underrun flag. + * @arg SAI_FLAG_MUTEDET: Mute detection flag. + * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag. + * @arg SAI_FLAG_FREQ: FIFO request flag. + * @arg SAI_FLAG_CNRDY: Codec not ready flag. + * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag. + * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified SAI pending flag. + * @param __HANDLE__ specifies the SAI Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun + * @arg SAI_FLAG_MUTEDET: Clear Mute detection + * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration + * @arg SAI_FLAG_FREQ: Clear FIFO request + * @arg SAI_FLAG_CNRDY: Clear Codec not ready + * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection + * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection + * + * @retval None + */ +#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__)) + +/** @brief Enable SAI. + * @param __HANDLE__ specifies the SAI Handle. + * @retval None + */ +#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN) + +/** @brief Disable SAI. + * @param __HANDLE__ specifies the SAI Handle. + * @retval None + */ +#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN) + +/** + * @} + */ + +/* Include SAI HAL Extension module */ +#include "stm32h7xx_hal_sai_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SAI_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup SAI_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); +HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai); +HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai); +void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai); +void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai); + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +/* SAI callbacks register/unregister functions ********************************/ +HAL_StatusTypeDef HAL_SAI_RegisterCallback(SAI_HandleTypeDef *hsai, + HAL_SAI_CallbackIDTypeDef CallbackID, + pSAI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SAI_UnRegisterCallback(SAI_HandleTypeDef *hsai, + HAL_SAI_CallbackIDTypeDef CallbackID); +#endif +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/** @addtogroup SAI_Exported_Functions_Group2 + * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai); +HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai); +HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai); + +/* Abort function */ +HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai); + +/* Mute management */ +HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val); +HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai); +HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter); +HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai); + +/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai); +void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai); +void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai); +void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai); +void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai); +void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai); +/** + * @} + */ + +/** @addtogroup SAI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_SAI_StateTypeDef HAL_SAI_GetState(const SAI_HandleTypeDef *hsai); +uint32_t HAL_SAI_GetError(const SAI_HandleTypeDef *hsai); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SAI_Private_Macros SAI Private Macros + * @{ + */ +#define IS_SAI_BLOCK_SYNCEXT(STATE) (((STATE) == SAI_SYNCEXT_DISABLE) ||\ + ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE) ||\ + ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE)) + +#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_I2S_STANDARD) ||\ + ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\ + ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\ + ((PROTOCOL) == SAI_PCM_LONG) ||\ + ((PROTOCOL) == SAI_PCM_SHORT)) + +#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE) (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT) ||\ + ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\ + ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT) ||\ + ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT)) + +#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \ + ((AUDIO) == SAI_AUDIO_FREQUENCY_8K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV)) + +#define IS_SAI_BLOCK_MCK_OVERSAMPLING(VALUE) (((VALUE) == SAI_MCK_OVERSAMPLING_DISABLE) || \ + ((VALUE) == SAI_MCK_OVERSAMPLING_ENABLE)) + +#define IS_SAI_PDM_MIC_PAIRS_NUMBER(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 3U)) + +#define IS_SAI_PDM_CLOCK_ENABLE(CLOCK) (((CLOCK) != 0U) && \ + (((CLOCK) & ~(SAI_PDM_CLOCK1_ENABLE | SAI_PDM_CLOCK2_ENABLE)) == 0U)) + +#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \ + ((MODE) == SAI_MODEMASTER_RX) || \ + ((MODE) == SAI_MODESLAVE_TX) || \ + ((MODE) == SAI_MODESLAVE_RX)) + +#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \ + ((PROTOCOL) == SAI_AC97_PROTOCOL) || \ + ((PROTOCOL) == SAI_SPDIF_PROTOCOL)) + +#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \ + ((DATASIZE) == SAI_DATASIZE_10) || \ + ((DATASIZE) == SAI_DATASIZE_16) || \ + ((DATASIZE) == SAI_DATASIZE_20) || \ + ((DATASIZE) == SAI_DATASIZE_24) || \ + ((DATASIZE) == SAI_DATASIZE_32)) + +#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \ + ((BIT) == SAI_FIRSTBIT_LSB)) + +#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \ + ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE)) +#if defined(SAI2) && defined(SAI3) && defined(SAI4) +#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI1) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI2) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI3) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI4)) +#elif defined(SAI2) +#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI1) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI2)) +#else +#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI1) || \ + ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI4)) +#endif + +#define IS_SAI_BLOCK_MCK_OUTPUT(VALUE) (((VALUE) == SAI_MCK_OUTPUT_ENABLE) || \ + ((VALUE) == SAI_MCK_OUTPUT_DISABLE)) + +#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \ + ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE)) + +#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \ + ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE)) + +#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63U) + +#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \ + ((VALUE) == SAI_LAST_SENT_VALUE)) + +#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \ + ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \ + ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \ + ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \ + ((MODE) == SAI_ALAW_2CPL_COMPANDING)) + +#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \ + ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \ + ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \ + ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \ + ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL)) + +#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\ + ((STATE) == SAI_OUTPUT_RELEASED)) + +#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\ + ((MODE) == SAI_STEREOMODE)) + +#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((ACTIVE) <= SAI_SLOTACTIVE_ALL) + +#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1U <= (NUMBER)) && ((NUMBER) <= 16U)) + +#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \ + ((SIZE) == SAI_SLOTSIZE_16B) || \ + ((SIZE) == SAI_SLOTSIZE_32B)) + +#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24U) + +#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \ + ((OFFSET) == SAI_FS_BEFOREFIRSTBIT)) + +#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \ + ((POLARITY) == SAI_FS_ACTIVE_HIGH)) + +#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \ + ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION)) + +#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 63U) + +#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8U <= (LENGTH)) && ((LENGTH) <= 256U)) + +#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1U <= (LENGTH)) && ((LENGTH) <= 128U)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SAI_Private_Functions SAI Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_SAI_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sai_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sai_ex.h new file mode 100644 index 0000000..edc87c2 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sai_ex.h @@ -0,0 +1,104 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sai_ex.h + * @author MCD Application Team + * @brief Header file of SAI HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_SAI_EX_H +#define STM32H7xx_HAL_SAI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup SAIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SAIEx_Exported_Types SAIEx Exported Types + * @{ + */ + +/** + * @brief PDM microphone delay structure definition + */ +typedef struct +{ + uint32_t MicPair; /*!< Specifies which pair of microphones is selected. + This parameter must be a number between Min_Data = 1 and Max_Data = 3. */ + + uint32_t LeftDelay; /*!< Specifies the delay in PDM clock unit to apply on left microphone. + This parameter must be a number between Min_Data = 0 and Max_Data = 7. */ + + uint32_t RightDelay; /*!< Specifies the delay in PDM clock unit to apply on right microphone. + This parameter must be a number between Min_Data = 0 and Max_Data = 7. */ +} SAIEx_PdmMicDelayParamTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SAIEx_Exported_Functions SAIEx Extended Exported Functions + * @{ + */ + +/** @addtogroup SAIEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_SAIEx_ConfigPdmMicDelay(const SAI_HandleTypeDef *hsai, + const SAIEx_PdmMicDelayParamTypeDef *pdmMicDelay); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup SAIEx_Private_Macros SAIEx Extended Private Macros + * @{ + */ +#define IS_SAI_PDM_MIC_DELAY(VALUE) ((VALUE) <= 7U) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_SAI_EX_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sd.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sd.h new file mode 100644 index 0000000..83fa74f --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sd.h @@ -0,0 +1,800 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sd.h + * @author MCD Application Team + * @brief Header file of SD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_SD_H +#define STM32H7xx_HAL_SD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_ll_sdmmc.h" +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) || defined (DLYB_SDMMC3) +#include "stm32h7xx_ll_delayblock.h" +#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */ + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup SD SD + * @brief SD HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SD_Exported_Types SD Exported Types + * @{ + */ + +/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure + * @{ + */ +typedef enum +{ + HAL_SD_STATE_RESET = ((uint32_t)0x00000000U), /*!< SD not yet initialized or disabled */ + HAL_SD_STATE_READY = ((uint32_t)0x00000001U), /*!< SD initialized and ready for use */ + HAL_SD_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< SD Timeout state */ + HAL_SD_STATE_BUSY = ((uint32_t)0x00000003U), /*!< SD process ongoing */ + HAL_SD_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< SD Programming State */ + HAL_SD_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< SD Receiving State */ + HAL_SD_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< SD Transfer State */ + HAL_SD_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< SD is in error state */ +} HAL_SD_StateTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure + * @{ + */ +typedef uint32_t HAL_SD_CardStateTypeDef; + +#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */ +#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */ +#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */ +#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */ +#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */ +#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */ +#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */ +#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */ +#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */ +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition + * @{ + */ +#define SD_InitTypeDef SDMMC_InitTypeDef +#define SD_TypeDef SDMMC_TypeDef + +/** + * @brief SD Card Information Structure definition + */ +typedef struct +{ + uint32_t CardType; /*!< Specifies the card Type */ + + uint32_t CardVersion; /*!< Specifies the card version */ + + uint32_t Class; /*!< Specifies the class of the card class */ + + uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ + + uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ + + uint32_t BlockSize; /*!< Specifies one block size in bytes */ + + uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ + + uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ + + uint32_t CardSpeed; /*!< Specifies the card Speed */ + +} HAL_SD_CardInfoTypeDef; + +/** + * @brief SD handle Structure definition + */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +typedef struct __SD_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +{ + SD_TypeDef *Instance; /*!< SD registers base address */ + + SD_InitTypeDef Init; /*!< SD required parameters */ + + HAL_LockTypeDef Lock; /*!< SD locking object */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */ + + uint32_t TxXferSize; /*!< SD Tx Transfer size */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */ + + uint32_t RxXferSize; /*!< SD Rx Transfer size */ + + __IO uint32_t Context; /*!< SD transfer context */ + + __IO HAL_SD_StateTypeDef State; /*!< SD card State */ + + __IO uint32_t ErrorCode; /*!< SD Card Error codes */ + + HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */ + + uint32_t CSD[4]; /*!< SD card specific data table */ + + uint32_t CID[4]; /*!< SD card identification number table */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* RxCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* ErrorCallback)(struct __SD_HandleTypeDef *hsd); + void (* AbortCpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Read_DMADblBuf0CpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Read_DMADblBuf1CpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Write_DMADblBuf0CpltCallback)(struct __SD_HandleTypeDef *hsd); + void (* Write_DMADblBuf1CpltCallback)(struct __SD_HandleTypeDef *hsd); +#if (USE_SD_TRANSCEIVER != 0U) + void (* DriveTransceiver_1_8V_Callback)(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ + + void (* MspInitCallback)(struct __SD_HandleTypeDef *hsd); + void (* MspDeInitCallback)(struct __SD_HandleTypeDef *hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +} SD_HandleTypeDef; + +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register + * @{ + */ +typedef struct +{ + __IO uint8_t CSDStruct; /*!< CSD structure */ + __IO uint8_t SysSpecVersion; /*!< System specification version */ + __IO uint8_t Reserved1; /*!< Reserved */ + __IO uint8_t TAAC; /*!< Data read access time 1 */ + __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ + __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ + __IO uint16_t CardComdClasses; /*!< Card command classes */ + __IO uint8_t RdBlockLen; /*!< Max. read data block length */ + __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ + __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ + __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ + __IO uint8_t DSRImpl; /*!< DSR implemented */ + __IO uint8_t Reserved2; /*!< Reserved */ + __IO uint32_t DeviceSize; /*!< Device Size */ + __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ + __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ + __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ + __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ + __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ + __IO uint8_t EraseGrSize; /*!< Erase group size */ + __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ + __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ + __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ + __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ + __IO uint8_t WrSpeedFact; /*!< Write speed factor */ + __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ + __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ + __IO uint8_t Reserved3; /*!< Reserved */ + __IO uint8_t ContentProtectAppli; /*!< Content protection application */ + __IO uint8_t FileFormatGroup; /*!< File format group */ + __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ + __IO uint8_t PermWrProtect; /*!< Permanent write protection */ + __IO uint8_t TempWrProtect; /*!< Temporary write protection */ + __IO uint8_t FileFormat; /*!< File format */ + __IO uint8_t ECC; /*!< ECC code */ + __IO uint8_t CSD_CRC; /*!< CSD CRC */ + __IO uint8_t Reserved4; /*!< Always 1 */ +} HAL_SD_CardCSDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register + * @{ + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ + __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ + __IO uint32_t ProdName1; /*!< Product Name part1 */ + __IO uint8_t ProdName2; /*!< Product Name part2 */ + __IO uint8_t ProdRev; /*!< Product Revision */ + __IO uint32_t ProdSN; /*!< Product Serial Number */ + __IO uint8_t Reserved1; /*!< Reserved1 */ + __IO uint16_t ManufactDate; /*!< Manufacturing Date */ + __IO uint8_t CID_CRC; /*!< CID CRC */ + __IO uint8_t Reserved2; /*!< Always 1 */ + +} HAL_SD_CardCIDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13 + * @{ + */ +typedef struct +{ + __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ + __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ + __IO uint16_t CardType; /*!< Carries information about card type */ + __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ + __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ + __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ + __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ + __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ + __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ + __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ + __IO uint8_t UhsSpeedGrade; /*!< Carries information about the speed grade of UHS card */ + __IO uint8_t UhsAllocationUnitSize; /*!< Carries information about the UHS card's allocation unit size */ + __IO uint8_t VideoSpeedClass; /*!< Carries information about the Video Speed Class of UHS card */ +} HAL_SD_CardStatusTypeDef; +/** + * @} + */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */ + HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */ + HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */ + HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */ + HAL_SD_READ_DMA_DBL_BUF0_CPLT_CB_ID = 0x04U, /*!< SD Rx DMA Double Buffer 0 Complete Callback ID */ + HAL_SD_READ_DMA_DBL_BUF1_CPLT_CB_ID = 0x05U, /*!< SD Rx DMA Double Buffer 1 Complete Callback ID */ + HAL_SD_WRITE_DMA_DBL_BUF0_CPLT_CB_ID = 0x06U, /*!< SD Tx DMA Double Buffer 0 Complete Callback ID */ + HAL_SD_WRITE_DMA_DBL_BUF1_CPLT_CB_ID = 0x07U, /*!< SD Tx DMA Double Buffer 1 Complete Callback ID */ + + HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */ + HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */ +} HAL_SD_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition + * @{ + */ +typedef void (*pSD_CallbackTypeDef)(SD_HandleTypeDef *hsd); +#if (USE_SD_TRANSCEIVER != 0U) +typedef void (*pSD_TransceiverCallbackTypeDef)(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ +/** + * @} + */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SD_Exported_Constants SD Exported Constants + * @{ + */ + +#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */ + +/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition + * @{ + */ +#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ +#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ +#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ +#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ +#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ +#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ +#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ +#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ +#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the */ + /*!< number of transferred bytes does not match the block length */ +#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ +#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ +#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ +#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock */ + /*!< command or if there was an attempt to access a locked card */ +#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ +#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ +#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ +#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ +#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ +#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ +#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ +#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ +#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ +#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ +#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out */ + /*!< of erase sequence command was received */ +#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ +#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ +#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ +#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ +#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ +#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ +#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ +#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ +#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration + * @{ + */ +#define SD_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */ +#define SD_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */ +#define SD_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */ +#define SD_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */ +#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */ +#define SD_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */ +#define SD_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards + * @{ + */ +#define CARD_NORMAL_SPEED ((uint32_t)0x00000000U) /*!< Normal Speed Card <12.5Mo/s , Spec Version 1.01 */ +#define CARD_HIGH_SPEED ((uint32_t)0x00000100U) /*!< High Speed Card <25Mo/s , Spec version 2.00 */ +#define CARD_ULTRA_HIGH_SPEED ((uint32_t)0x00000200U) /*!< UHS-I SD Card <50Mo/s for SDR50, DDR5 Cards + and <104Mo/s for SDR104, Spec version 3.01 */ + +#define CARD_SDSC ((uint32_t)0x00000000U) /*!< SD Standard Capacity <2Go */ +#define CARD_SDHC_SDXC ((uint32_t)0x00000001U) /*!< SD High Capacity <32Go, SD Extended Capacity <2To */ +#define CARD_SECURED ((uint32_t)0x00000003U) + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version + * @{ + */ +#define CARD_V1_X ((uint32_t)0x00000000U) +#define CARD_V2_X ((uint32_t)0x00000001U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SD_Exported_macros SD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +/** @brief Reset SD handle state. + * @param __HANDLE__ SD Handle. + * @retval None + */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET) +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + +/** + * @brief Enable the SD device interrupt. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Disable the SD device interrupt. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Check whether the specified SD flag is set or not. + * @param __HANDLE__ SD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_DPSMACT: Data path state machine active + * @arg SDMMC_FLAG_CPSMACT: Command path state machine active + * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full + * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy) + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval The new state of SD FLAG (SET or RESET). + */ +#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Clear the SD's pending flags. + * @param __HANDLE__ SD Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval None + */ +#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Check whether the specified SD interrupt has occurred or not. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval The new state of SD IT (SET or RESET). + */ +#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Clear the SD's interrupt pending bits. + * @param __HANDLE__ SD Handle. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @} + */ + +/* Include SD HAL Extension module */ +#include "stm32h7xx_hal_sd_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SD_Exported_Functions SD Exported Functions + * @{ + */ + +/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd); +void HAL_SD_MspInit(SD_HandleTypeDef *hsd); +void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd); +/* Non-Blocking mode: IT */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks); + +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); + +/* Callback in non blocking modes (DMA) */ +void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd); +void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd); +void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd); + +#if (USE_SD_TRANSCEIVER != 0U) +/* Callback to switch in 1.8V mode */ +void HAL_SD_DriveTransceiver_1_8V_Callback(FlagStatus status); +#endif /* USE_SD_TRANSCEIVER */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +/* SD callback registering/unregistering */ +HAL_StatusTypeDef HAL_SD_RegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, + pSD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID); + +#if (USE_SD_TRANSCEIVER != 0U) +HAL_StatusTypeDef HAL_SD_RegisterTransceiverCallback(SD_HandleTypeDef *hsd, pSD_TransceiverCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SD_UnRegisterTransceiverCallback(SD_HandleTypeDef *hsd); +#endif /* USE_SD_TRANSCEIVER */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode); +HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group4 SD card related functions + * @{ + */ +HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID); +HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD); +HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus); +HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions + * @{ + */ +HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd); +uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management + * @{ + */ +HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup SD_Private_Types SD Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SD_Private_Defines SD Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup SD_Private_Variables SD Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SD_Private_Constants SD Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SD_Private_Macros SD Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7xx_HAL_SD_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sd_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sd_ex.h new file mode 100644 index 0000000..450e7df --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sd_ex.h @@ -0,0 +1,110 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sd_ex.h + * @author MCD Application Team + * @brief Header file of SD HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_SD_EX_H +#define STM32H7xx_HAL_SD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup SDEx + * @brief SD HAL extended module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SDEx_Exported_Types SDEx Exported Types + * @{ + */ + +/** @defgroup SDEx_Exported_Types_Group1 SD Card Internal DMA Buffer structure + * @{ + */ +typedef enum +{ + SD_DMA_BUFFER0 = 0x00U, /*!< selects SD internal DMA Buffer 0 */ + SD_DMA_BUFFER1 = 0x01U, /*!< selects SD internal DMA Buffer 1 */ + +} HAL_SDEx_DMABuffer_MemoryTypeDef; + +/** + * @} + */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SDEx_Exported_Functions SDEx Exported Functions + * @{ + */ + +/** @defgroup SDEx_Exported_Functions_Group1 MultiBuffer functions + * @{ + */ + +HAL_StatusTypeDef HAL_SDEx_ConfigDMAMultiBuffer(SD_HandleTypeDef *hsd, uint32_t *pDataBuffer0, uint32_t *pDataBuffer1, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDEx_ReadBlocksDMAMultiBuffer(SD_HandleTypeDef *hsd, uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SDEx_WriteBlocksDMAMultiBuffer(SD_HandleTypeDef *hsd, uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SDEx_ChangeDMABuffer(SD_HandleTypeDef *hsd, HAL_SDEx_DMABuffer_MemoryTypeDef Buffer, + uint32_t *pDataBuffer); + +void HAL_SDEx_Read_DMADoubleBuf0CpltCallback(SD_HandleTypeDef *hsd); +void HAL_SDEx_Read_DMADoubleBuf1CpltCallback(SD_HandleTypeDef *hsd); +void HAL_SDEx_Write_DMADoubleBuf0CpltCallback(SD_HandleTypeDef *hsd); +void HAL_SDEx_Write_DMADoubleBuf1CpltCallback(SD_HandleTypeDef *hsd); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions prototypes ----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + + +#endif /* stm32h7xx_HAL_SD_EX_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sdram.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sdram.h new file mode 100644 index 0000000..cee1ffd --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sdram.h @@ -0,0 +1,236 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sdram.h + * @author MCD Application Team + * @brief Header file of SDRAM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_SDRAM_H +#define STM32H7xx_HAL_SDRAM_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_ll_fmc.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup SDRAM + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup SDRAM_Exported_Types SDRAM Exported Types + * @{ + */ + +/** + * @brief HAL SDRAM State structure definition + */ +typedef enum +{ + HAL_SDRAM_STATE_RESET = 0x00U, /*!< SDRAM not yet initialized or disabled */ + HAL_SDRAM_STATE_READY = 0x01U, /*!< SDRAM initialized and ready for use */ + HAL_SDRAM_STATE_BUSY = 0x02U, /*!< SDRAM internal process is ongoing */ + HAL_SDRAM_STATE_ERROR = 0x03U, /*!< SDRAM error state */ + HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04U, /*!< SDRAM device write protected */ + HAL_SDRAM_STATE_PRECHARGED = 0x05U /*!< SDRAM device precharged */ + +} HAL_SDRAM_StateTypeDef; + +/** + * @brief SDRAM handle Structure definition + */ +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +typedef struct __SDRAM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +{ + FMC_SDRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */ + + __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */ + + HAL_LockTypeDef Lock; /*!< SDRAM locking object */ + + MDMA_HandleTypeDef *hmdma; /*!< Pointer DMA handler */ + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Msp Init callback */ + void (* MspDeInitCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Msp DeInit callback */ + void (* RefreshErrorCallback)(struct __SDRAM_HandleTypeDef *hsdram); /*!< SDRAM Refresh Error callback */ + void (* DmaXferCpltCallback)(MDMA_HandleTypeDef *hmdma); /*!< SDRAM DMA Xfer Complete callback */ + void (* DmaXferErrorCallback)(MDMA_HandleTypeDef *hmdma); /*!< SDRAM DMA Xfer Error callback */ +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +} SDRAM_HandleTypeDef; + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SDRAM Callback ID enumeration definition + */ +typedef enum +{ + HAL_SDRAM_MSP_INIT_CB_ID = 0x00U, /*!< SDRAM MspInit Callback ID */ + HAL_SDRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SDRAM MspDeInit Callback ID */ + HAL_SDRAM_REFRESH_ERR_CB_ID = 0x02U, /*!< SDRAM Refresh Error Callback ID */ + HAL_SDRAM_DMA_XFER_CPLT_CB_ID = 0x03U, /*!< SDRAM DMA Xfer Complete Callback ID */ + HAL_SDRAM_DMA_XFER_ERR_CB_ID = 0x04U /*!< SDRAM DMA Xfer Error Callback ID */ +} HAL_SDRAM_CallbackIDTypeDef; + +/** + * @brief HAL SDRAM Callback pointer definition + */ +typedef void (*pSDRAM_CallbackTypeDef)(SDRAM_HandleTypeDef *hsdram); +typedef void (*pSDRAM_DmaCallbackTypeDef)(MDMA_HandleTypeDef *hmdma); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros + * @{ + */ + +/** @brief Reset SDRAM handle state + * @param __HANDLE__ specifies the SDRAM handle. + * @retval None + */ +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SDRAM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET) +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions + * @{ + */ + +/** @addtogroup SDRAM_Exported_Functions_Group1 + * @{ + */ + +/* Initialization/de-initialization functions *********************************/ +HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing); +HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram); +void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram); +void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram); + +void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram); +void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram); +void HAL_SDRAM_DMA_XferCpltCallback(MDMA_HandleTypeDef *hmdma); +void HAL_SDRAM_DMA_XferErrorCallback(MDMA_HandleTypeDef *hmdma); + +/** + * @} + */ + +/** @addtogroup SDRAM_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ****************************************************/ +HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); + +HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +/* SDRAM callback registering/unregistering */ +HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, + pSDRAM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId); +HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, + pSDRAM_DmaCallbackTypeDef pCallback); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup SDRAM_Exported_Functions_Group3 + * @{ + */ +/* SDRAM Control functions *****************************************************/ +HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram); +HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram); +HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate); +HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber); +uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram); + +/** + * @} + */ + +/** @addtogroup SDRAM_Exported_Functions_Group4 + * @{ + */ +/* SDRAM State functions ********************************************************/ +HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_SDRAM_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sram.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sram.h new file mode 100644 index 0000000..b50dc29 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_sram.h @@ -0,0 +1,230 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sram.h + * @author MCD Application Team + * @brief Header file of SRAM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_SRAM_H +#define STM32H7xx_HAL_SRAM_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_ll_fmc.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ +/** @addtogroup SRAM + * @{ + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Types SRAM Exported Types + * @{ + */ +/** + * @brief HAL SRAM State structures definition + */ +typedef enum +{ + HAL_SRAM_STATE_RESET = 0x00U, /*!< SRAM not yet initialized or disabled */ + HAL_SRAM_STATE_READY = 0x01U, /*!< SRAM initialized and ready for use */ + HAL_SRAM_STATE_BUSY = 0x02U, /*!< SRAM internal process is ongoing */ + HAL_SRAM_STATE_ERROR = 0x03U, /*!< SRAM error state */ + HAL_SRAM_STATE_PROTECTED = 0x04U /*!< SRAM peripheral NORSRAM device write protected */ + +} HAL_SRAM_StateTypeDef; + +/** + * @brief SRAM handle Structure definition + */ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +typedef struct __SRAM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +{ + FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ + + FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ + + FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */ + + HAL_LockTypeDef Lock; /*!< SRAM locking object */ + + __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */ + + MDMA_HandleTypeDef *hmdma; /*!< Pointer DMA handler */ + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + void (* MspInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp Init callback */ + void (* MspDeInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp DeInit callback */ + void (* DmaXferCpltCallback)(MDMA_HandleTypeDef *hmdma); /*!< SRAM DMA Xfer Complete callback */ + void (* DmaXferErrorCallback)(MDMA_HandleTypeDef *hmdma); /*!< SRAM DMA Xfer Error callback */ +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} SRAM_HandleTypeDef; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SRAM Callback ID enumeration definition + */ +typedef enum +{ + HAL_SRAM_MSP_INIT_CB_ID = 0x00U, /*!< SRAM MspInit Callback ID */ + HAL_SRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SRAM MspDeInit Callback ID */ + HAL_SRAM_DMA_XFER_CPLT_CB_ID = 0x02U, /*!< SRAM DMA Xfer Complete Callback ID */ + HAL_SRAM_DMA_XFER_ERR_CB_ID = 0x03U /*!< SRAM DMA Xfer Complete Callback ID */ +} HAL_SRAM_CallbackIDTypeDef; + +/** + * @brief HAL SRAM Callback pointer definition + */ +typedef void (*pSRAM_CallbackTypeDef)(SRAM_HandleTypeDef *hsram); +typedef void (*pSRAM_DmaCallbackTypeDef)(MDMA_HandleTypeDef *hmdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Macros SRAM Exported Macros + * @{ + */ + +/** @brief Reset SRAM handle state + * @param __HANDLE__ SRAM handle + * @retval None + */ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_SRAM_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET) +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SRAM_Exported_Functions SRAM Exported Functions + * @{ + */ + +/** @addtogroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming); +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram); +void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group2 Input Output and memory control functions + * @{ + */ + +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize); +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize); + +void HAL_SRAM_DMA_XferCpltCallback(MDMA_HandleTypeDef *hmdma); +void HAL_SRAM_DMA_XferErrorCallback(MDMA_HandleTypeDef *hmdma); + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/* SRAM callback registering/unregistering */ +HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId); +HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_DmaCallbackTypeDef pCallback); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group3 Control functions + * @{ + */ + +/* SRAM Control functions ****************************************************/ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram); +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** @addtogroup SRAM_Exported_Functions_Group4 Peripheral State functions + * @{ + */ + +/* SRAM State functions ******************************************************/ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(const SRAM_HandleTypeDef *hsram); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_SRAM_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h new file mode 100644 index 0000000..8f49df2 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h @@ -0,0 +1,2466 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_TIM_H +#define STM32H7xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + * @note Advanced timers provide TRGO2 internal line which is redirected + * to the ADC + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +#if defined(TIM_BDTR_BKBID) + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.This parameter can be a value of @ref TIM_Break_Input_AF_Mode */ + +#endif /* TIM_BDTR_BKBID */ + uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ + + uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */ + + uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +#if defined(TIM_BDTR_BKBID) + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input.This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */ + +#endif /* TIM_BDTR_BKBID */ + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ + HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ + void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +#define TIM_DMABASE_CCMR3 0x00000015U +#define TIM_DMABASE_CCR5 0x00000016U +#define TIM_DMABASE_CCR6 0x00000017U +#if defined(TIM_BREAK_INPUT_SUPPORT) +#define TIM_DMABASE_AF1 0x00000018U +#define TIM_DMABASE_AF2 0x00000019U +#endif /* TIM_BREAK_INPUT_SUPPORT */ +#define TIM_DMABASE_TISEL 0x0000001AU +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_CC_DMA_Request CCx DMA request selection + * @{ + */ +#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ +#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ +#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ +#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ +#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_ITR4 TIM_TS_ITR4 /*!< External clock source mode 1 (ITR4) */ +#define TIM_CLOCKSOURCE_ITR5 TIM_TS_ITR5 /*!< External clock source mode 1 (ITR5) */ +#define TIM_CLOCKSOURCE_ITR6 TIM_TS_ITR6 /*!< External clock source mode 1 (ITR6) */ +#define TIM_CLOCKSOURCE_ITR7 TIM_TS_ITR7 /*!< External clock source mode 1 (ITR7) */ +#define TIM_CLOCKSOURCE_ITR8 TIM_TS_ITR8 /*!< External clock source mode 1 (ITR8) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ +#if defined(TIM_BDTR_BKBID) + +/** @defgroup TIM_Break_Input_AF_Mode TIM Break Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK_AFMODE_INPUT 0x00000000U /*!< Break input BRK in input mode */ +#define TIM_BREAK_AFMODE_BIDIRECTIONAL TIM_BDTR_BKBID /*!< Break input BRK in bidirectional mode */ +/** + * @} + */ +#endif /*TIM_BDTR_BKBID */ + +/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable + * @{ + */ +#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ +#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity + * @{ + */ +#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ +#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ +/** + * @} + */ +#if defined(TIM_BDTR_BKBID) + +/** @defgroup TIM_Break2_Input_AF_Mode TIM Break2 Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK2_AFMODE_INPUT 0x00000000U /*!< Break2 input BRK2 in input mode */ +#define TIM_BREAK2_AFMODE_BIDIRECTIONAL TIM_BDTR_BK2BID /*!< Break2 input BRK2 in bidirectional mode */ +/** + * @} + */ +#endif /* TIM_BDTR_BKBID */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3 + * @{ + */ +#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ +#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */ +#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */ +#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) + * @{ + */ +#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASYMMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASYMMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_ITR4 (TIM_SMCR_TS_3) /*!< Internal Trigger 4 (ITR4) */ +#define TIM_TS_ITR5 (TIM_SMCR_TS_0 | TIM_SMCR_TS_3) /*!< Internal Trigger 5 (ITR5) */ +#define TIM_TS_ITR6 (TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 6 (ITR6) */ +#define TIM_TS_ITR7 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 7 (ITR7) */ +#define TIM_TS_ITR8 (TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 8 (ITR8) */ +#define TIM_TS_ITR9 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 9 (ITR9) */ +#define TIM_TS_ITR10 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 10 (ITR10) */ +#define TIM_TS_ITR11 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 11 (ITR11) */ +#define TIM_TS_ITR12 (TIM_SMCR_TS_4) /*!< Internal Trigger 12 (ITR12) */ +#define TIM_TS_ITR13 (TIM_SMCR_TS_0 | TIM_SMCR_TS_4) /*!< Internal Trigger 13 (ITR13) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_System TIM Break System + * @{ + */ +#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/8/15/16/17 */ +#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/8/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#define TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/8/15/16/17 */ +#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/8/15/16/17 */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in + * case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @arg TIM_CHANNEL_5: get capture/compare 5 register value + * @arg TIM_CHANNEL_6: get capture/compare 6 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ + ((__HANDLE__)->Instance->CCR6)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** @brief Select the Capture/compare DMA request source. + * @param __HANDLE__ specifies the TIM Handle. + * @param __CCDMA__ specifies Capture/compare DMA request source + * This parameter can be one of the following values: + * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event + * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event + * @retval None + */ +#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_AF1) || \ + ((__BASE__) == TIM_DMABASE_AF2) || \ + ((__BASE__) == TIM_DMABASE_TISEL)) + + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENABLE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_CCX_CHANNEL(__INSTANCE__, __CHANNEL__) (IS_TIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) && \ + ((__CHANNEL__) != (TIM_CHANNEL_5)) && \ + ((__CHANNEL__) != (TIM_CHANNEL_6))) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_5) || \ + ((__CHANNEL__) == TIM_CHANNEL_6) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_PERIOD(__HANDLE__, __PERIOD__) ((IS_TIM_32B_COUNTER_INSTANCE(((__HANDLE__)->Instance)) == 0U) ? \ + (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0x0000FFFFU)) : \ + ((__PERIOD__) > 0U)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) +#if defined(TIM_BDTR_BKBID) + +#define IS_TIM_BREAK_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK_AFMODE_BIDIRECTIONAL)) + +#endif /* TIM_BDTR_BKBID */ + +#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ + ((__STATE__) == TIM_BREAK2_DISABLE)) + +#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) +#if defined(TIM_BDTR_BKBID) + +#define IS_TIM_BREAK2_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK2_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + +#endif /* TIM_BDTR_BKBID */ + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ + ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO2_OC1) || \ + ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) + +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR12) || \ + ((__SELECTION__) == TIM_TS_ITR13) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR12) || \ + ((__SELECTION__) == TIM_TS_ITR13) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ + (__HANDLE__)->ChannelState[5]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[4] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[5] = \ + (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32h7xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_TIM_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h new file mode 100644 index 0000000..0943858 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h @@ -0,0 +1,533 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_TIM_EX_H +#define STM32H7xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; +#if defined(TIM_BREAK_INPUT_SUPPORT) + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity + Not relevant when analog watchdog output of the DFSDM1 used as break input source */ +} TIMEx_BreakInputConfigTypeDef; + +#endif /* TIM_BREAK_INPUT_SUPPORT */ +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_GPIO 0x00000000U /*!< TIM1_ETR is connected to GPIO */ +#define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /*!< TIM1_ETR is connected to COMP1 OUT */ +#define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /*!< TIM1_ETR is connected to COMP2 OUT */ +#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 (TIM1_AF1_ETRSEL_2) /*!< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD3 */ +#define TIM_TIM1_ETR_ADC3_AWD1 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /*!< TIM1_ETR is connected to ADC3 AWD1 */ +#define TIM_TIM1_ETR_ADC3_AWD2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC3 AWD2 */ +#define TIM_TIM1_ETR_ADC3_AWD3 TIM1_AF1_ETRSEL_3 /*!< TIM1_ETR is connected to ADC3 AWD3 */ + +#define TIM_TIM8_ETR_GPIO 0x00000000U /*!< TIM8_ETR is connected to GPIO */ +#define TIM_TIM8_ETR_COMP1 TIM8_AF1_ETRSEL_0 /*!< TIM8_ETR is connected to COMP1 OUT */ +#define TIM_TIM8_ETR_COMP2 TIM8_AF1_ETRSEL_1 /*!< TIM8_ETR is connected to COMP2 OUT */ +#define TIM_TIM8_ETR_ADC2_AWD1 (TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /*!< TIM8_ETR is connected to ADC2 AWD1 */ +#define TIM_TIM8_ETR_ADC2_AWD2 (TIM8_AF1_ETRSEL_2) /*!< TIM8_ETR is connected to ADC2 AWD2 */ +#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0) /*!< TIM8_ETR is connected to ADC2 AWD3 */ +#define TIM_TIM8_ETR_ADC3_AWD1 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1) /*!< TIM8_ETR is connected to ADC3 AWD1 */ +#define TIM_TIM8_ETR_ADC3_AWD2 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /*!< TIM8_ETR is connected to ADC3 AWD2 */ +#define TIM_TIM8_ETR_ADC3_AWD3 TIM8_AF1_ETRSEL_3 /*!< TIM8_ETR is connected to ADC3 AWD3 */ + +#define TIM_TIM2_ETR_GPIO 0x00000000U /*!< TIM2_ETR is connected to GPIO */ +#define TIM_TIM2_ETR_COMP1 (TIM2_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to COMP1 OUT */ +#define TIM_TIM2_ETR_COMP2 (TIM2_AF1_ETRSEL_1) /*!< TIM2_ETR is connected to COMP2 OUT */ +#define TIM_TIM2_ETR_RCC_LSE (TIM2_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to RCC LSE */ +#define TIM_TIM2_ETR_SAI1_FSA TIM2_AF1_ETRSEL_2 /*!< TIM2_ETR is connected to SAI1 FS_A */ +#define TIM_TIM2_ETR_SAI1_FSB (TIM2_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to SAI1 FS_B */ + +#define TIM_TIM3_ETR_GPIO 0x00000000U /*!< TIM3_ETR is connected to GPIO */ +#define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /*!< TIM3_ETR is connected to COMP1 OUT */ + +#define TIM_TIM5_ETR_GPIO 0x00000000U /*!< TIM5_ETR is connected to GPIO */ +#define TIM_TIM5_ETR_SAI2_FSA TIM5_AF1_ETRSEL_0 /*!< TIM5_ETR is connected to SAI2 FS_A */ +#define TIM_TIM5_ETR_SAI2_FSB TIM5_AF1_ETRSEL_1 /*!< TIM5_ETR is connected to SAI2 FS_B */ +#define TIM_TIM5_ETR_SAI4_FSA TIM5_AF1_ETRSEL_0 /*!< TIM5_ETR is connected to SAI4 FS_A */ +#define TIM_TIM5_ETR_SAI4_FSB TIM5_AF1_ETRSEL_1 /*!< TIM5_ETR is connected to SAI4 FS_B */ + +#define TIM_TIM23_ETR_GPIO 0x00000000U /*!< TIM23_ETR is connected to GPIO */ +#define TIM_TIM23_ETR_COMP1 (TIM2_AF1_ETRSEL_0) /*!< TIM23_ETR is connected to COMP1 OUT */ +#define TIM_TIM23_ETR_COMP2 (TIM2_AF1_ETRSEL_1) /*!< TIM23_ETR is connected to COMP2 OUT */ + +#define TIM_TIM24_ETR_GPIO 0x00000000U /*!< TIM24_ETR is connected to GPIO */ +#define TIM_TIM24_ETR_SAI4_FSA TIM5_AF1_ETRSEL_0 /*!< TIM24_ETR is connected to SAI4 FS_A */ +#define TIM_TIM24_ETR_SAI4_FSB TIM5_AF1_ETRSEL_1 /*!< TIM24_ETR is connected to SAI4 FS_B */ +#define TIM_TIM24_ETR_SAI1_FSA (TIM2_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /*!< TIM24_ETR is connected to SAI1 FS_A */ +#define TIM_TIM24_ETR_SAI1_FSB TIM2_AF1_ETRSEL_2 /*!< TIM24_ETR is connected to SAI1 FS_B */ +/** + * @} + */ +#if defined(TIM_BREAK_INPUT_SUPPORT) + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ +#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /*!< An external source (GPIO) is connected to the BKIN pin */ +#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /*!< The COMP1 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /*!< The COMP2 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_DFSDM1 0x00000008U /*!< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ +/** + * @} + */ +#endif /* TIM_BREAK_INPUT_SUPPORT */ + +/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection + * @{ + */ +#define TIM_TIM1_TI1_GPIO 0x00000000U /*!< TIM1_TI1 is connected to GPIO */ +#define TIM_TIM1_TI1_COMP1 TIM_TISEL_TI1SEL_0 /*!< TIM1_TI1 is connected to COMP1 OUT */ + +#define TIM_TIM8_TI1_GPIO 0x00000000U /*!< TIM8_TI1 is connected to GPIO */ +#define TIM_TIM8_TI1_COMP2 TIM_TISEL_TI1SEL_0 /*!< TIM8_TI1 is connected to COMP2 OUT */ + +#define TIM_TIM2_TI4_GPIO 0x00000000U /*!< TIM2_TI4 is connected to GPIO */ +#define TIM_TIM2_TI4_COMP1 TIM_TISEL_TI4SEL_0 /*!< TIM2_TI4 is connected to COMP1 OUT */ +#define TIM_TIM2_TI4_COMP2 TIM_TISEL_TI4SEL_1 /*!< TIM2_TI4 is connected to COMP2 OUT */ +#define TIM_TIM2_TI4_COMP1_COMP2 (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /*!< TIM2_TI4 is connected to COMP2 OUT OR COMP2 OUT */ + +#define TIM_TIM3_TI1_GPIO 0x00000000U /*!< TIM3_TI1 is connected to GPIO */ +#define TIM_TIM3_TI1_COMP1 TIM_TISEL_TI1SEL_0 /*!< TIM3_TI1 is connected to COMP1 OUT */ +#define TIM_TIM3_TI1_COMP2 TIM_TISEL_TI1SEL_1 /*!< TIM3_TI1 is connected to COMP2 OUT */ +#define TIM_TIM3_TI1_COMP1_COMP2 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /*!< TIM3_TI1 is connected to COMP1 OUT or COMP2 OUT */ + +#define TIM_TIM5_TI1_GPIO 0x00000000U /*!< TIM5_TI1 is connected to GPIO */ +#define TIM_TIM5_TI1_CAN_TMP TIM_TISEL_TI1SEL_0 /*!< TIM5_TI1 is connected to CAN TMP */ +#define TIM_TIM5_TI1_CAN_RTP TIM_TISEL_TI1SEL_1 /*!< TIM5_TI1 is connected to CAN RTP */ + +#define TIM_TIM12_TI1_GPIO 0x00000000U /*!< TIM12 TI1 is connected to GPIO */ +#define TIM_TIM12_TI1_SPDIF_FS TIM_TISEL_TI1SEL_0 /*!< TIM12 TI1 is connected to SPDIF FS */ + +#define TIM_TIM15_TI1_GPIO 0x00000000U /*!< TIM15_TI1 is connected to GPIO */ +#define TIM_TIM15_TI1_TIM2_CH1 TIM_TISEL_TI1SEL_0 /*!< TIM15_TI1 is connected to TIM2 CH1 */ +#define TIM_TIM15_TI1_TIM3_CH1 TIM_TISEL_TI1SEL_1 /*!< TIM15_TI1 is connected to TIM3 CH1 */ +#define TIM_TIM15_TI1_TIM4_CH1 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /*!< TIM15_TI1 is connected to TIM4 CH1 */ +#define TIM_TIM15_TI1_RCC_LSE (TIM_TISEL_TI1SEL_2) /*!< TIM15_TI1 is connected to RCC LSE */ +#define TIM_TIM15_TI1_RCC_CSI (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_0) /*!< TIM15_TI1 is connected to RCC CSI */ +#define TIM_TIM15_TI1_RCC_MCO2 (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_1) /*!< TIM15_TI1 is connected to RCC MCO2 */ + +#define TIM_TIM15_TI2_GPIO 0x00000000U /*!< TIM15_TI2 is connected to GPIO */ +#define TIM_TIM15_TI2_TIM2_CH2 (TIM_TISEL_TI2SEL_0) /*!< TIM15_TI2 is connected to TIM2 CH2 */ +#define TIM_TIM15_TI2_TIM3_CH2 (TIM_TISEL_TI2SEL_1) /*!< TIM15_TI2 is connected to TIM3 CH2 */ +#define TIM_TIM15_TI2_TIM4_CH2 (TIM_TISEL_TI2SEL_0 | TIM_TISEL_TI2SEL_1) /*!< TIM15_TI2 is connected to TIM4 CH2 */ + +#define TIM_TIM16_TI1_GPIO 0x00000000U /*!< TIM16 TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_RCC_LSI TIM_TISEL_TI1SEL_0 /*!< TIM16 TI1 is connected to RCC LSI */ +#define TIM_TIM16_TI1_RCC_LSE TIM_TISEL_TI1SEL_1 /*!< TIM16 TI1 is connected to RCC LSE */ +#define TIM_TIM16_TI1_WKUP_IT (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /*!< TIM16 TI1 is connected to WKUP_IT */ + +#define TIM_TIM17_TI1_GPIO 0x00000000U /*!< TIM17 TI1 is connected to GPIO */ +#define TIM_TIM17_TI1_SPDIF_FS TIM_TISEL_TI1SEL_0 /*!< TIM17 TI1 is connected to SPDIF FS */ +#define TIM_TIM17_TI1_RCC_HSE1MHZ TIM_TISEL_TI1SEL_1 /*!< TIM17 TI1 is connected to RCC HSE 1Mhz */ +#define TIM_TIM17_TI1_RCC_MCO1 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /*!< TIM17 TI1 is connected to RCC MCO1 */ + +#define TIM_TIM23_TI4_GPIO 0x00000000U /*!< TIM23_TI4 is connected to GPIO */ +#define TIM_TIM23_TI4_COMP1 TIM_TISEL_TI4SEL_0 /*!< TIM23_TI4 is connected to COMP1 OUT */ +#define TIM_TIM23_TI4_COMP2 TIM_TISEL_TI4SEL_1 /*!< TIM23_TI4 is connected to COMP2 OUT */ +#define TIM_TIM23_TI4_COMP1_COMP2 (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /*!< TIM23_TI4 is connected to COMP1 OUT or COMP2 OUT */ + +#define TIM_TIM24_TI1_GPIO 0x00000000U /*!< TIM24_TI1 is connected to GPIO */ +#define TIM_TIM24_TI1_CAN_TMP TIM_TISEL_TI1SEL_0 /*!< TIM24_TI1 is connected to CAN TMP */ +#define TIM_TIM24_TI1_CAN_RTP TIM_TISEL_TI1SEL_1 /*!< TIM24_TI1 is connected to CAN RTP */ +#define TIM_TIM24_TI1_CAN_SOC (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /*!< TIM24_TI1 is connected to CAN SOC */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1)) + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +#define IS_TIM_TISEL(__TISEL__) (((__TISEL__) == TIM_TIM1_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM1_TI1_COMP1) ||\ + ((__TISEL__) == TIM_TIM8_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM8_TI1_COMP2) ||\ + ((__TISEL__) == TIM_TIM2_TI4_GPIO) ||\ + ((__TISEL__) == TIM_TIM2_TI4_COMP1) ||\ + ((__TISEL__) == TIM_TIM2_TI4_COMP2) ||\ + ((__TISEL__) == TIM_TIM2_TI4_COMP1_COMP2) ||\ + ((__TISEL__) == TIM_TIM3_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM3_TI1_COMP1) ||\ + ((__TISEL__) == TIM_TIM3_TI1_COMP2) ||\ + ((__TISEL__) == TIM_TIM3_TI1_COMP1_COMP2) ||\ + ((__TISEL__) == TIM_TIM5_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM5_TI1_CAN_TMP) ||\ + ((__TISEL__) == TIM_TIM5_TI1_CAN_RTP) ||\ + ((__TISEL__) == TIM_TIM12_TI1_SPDIF_FS) ||\ + ((__TISEL__) == TIM_TIM12_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM15_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM15_TI1_TIM2_CH1) ||\ + ((__TISEL__) == TIM_TIM15_TI1_TIM3_CH1) ||\ + ((__TISEL__) == TIM_TIM15_TI1_TIM4_CH1) ||\ + ((__TISEL__) == TIM_TIM15_TI1_RCC_LSE) ||\ + ((__TISEL__) == TIM_TIM15_TI1_RCC_CSI) ||\ + ((__TISEL__) == TIM_TIM15_TI1_RCC_MCO2) ||\ + ((__TISEL__) == TIM_TIM15_TI2_GPIO) ||\ + ((__TISEL__) == TIM_TIM15_TI2_TIM2_CH2) ||\ + ((__TISEL__) == TIM_TIM15_TI2_TIM3_CH2) ||\ + ((__TISEL__) == TIM_TIM15_TI2_TIM4_CH2) ||\ + ((__TISEL__) == TIM_TIM16_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM16_TI1_RCC_LSI) ||\ + ((__TISEL__) == TIM_TIM16_TI1_RCC_LSE) ||\ + ((__TISEL__) == TIM_TIM16_TI1_WKUP_IT) ||\ + ((__TISEL__) == TIM_TIM17_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM17_TI1_SPDIF_FS) ||\ + ((__TISEL__) == TIM_TIM17_TI1_RCC_HSE1MHZ) ||\ + ((__TISEL__) == TIM_TIM17_TI1_RCC_MCO1) ||\ + ((__TISEL__) == TIM_TIM23_TI4_GPIO) ||\ + ((__TISEL__) == TIM_TIM23_TI4_COMP1) ||\ + ((__TISEL__) == TIM_TIM23_TI4_COMP2) ||\ + ((__TISEL__) == TIM_TIM23_TI4_COMP1_COMP2) ||\ + ((__TISEL__) == TIM_TIM24_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM24_TI1_CAN_TMP) ||\ + ((__TISEL__) == TIM_TIM24_TI1_CAN_RTP) ||\ + ((__TISEL__) == TIM_TIM24_TI1_CAN_SOC)) + +#define IS_TIM_REMAP(__RREMAP__) (((__RREMAP__) == TIM_TIM1_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD1) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD2) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD3) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD1) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD2) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD3) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_COMP2) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD1) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD2) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD3) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD1) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD2) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD3) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_COMP2) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_COMP2) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_RCC_LSE) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_SAI1_FSA) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_SAI1_FSB) ||\ + ((__RREMAP__) == TIM_TIM3_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM3_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM5_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM5_ETR_SAI2_FSA) ||\ + ((__RREMAP__) == TIM_TIM5_ETR_SAI2_FSB) ||\ + ((__RREMAP__) == TIM_TIM23_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM23_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM23_ETR_COMP2) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_SAI4_FSA) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_SAI4_FSB) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_SAI1_FSA) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_SAI1_FSB)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +#if defined(TIM_BREAK_INPUT_SUPPORT) +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +#endif /* TIM_BREAK_INPUT_SUPPORT */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel); +#if defined(TIM_BDTR_BKBID) + +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(const TIM_HandleTypeDef *htim, uint32_t BreakInput); +#endif /* TIM_BDTR_BKBID */ +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7xx_HAL_TIM_EX_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h new file mode 100644 index 0000000..c6fced0 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h @@ -0,0 +1,1749 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_UART_H +#define STM32H7xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + LPUART: + ======= + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + where lpuart_ker_ck_pres is the UART input clock divided by a prescaler + UART: + ===== + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_D2PCLK1 = 0x00U, /*!< Domain2 PCLK1 clock source */ + UART_CLOCKSOURCE_D2PCLK2 = 0x01U, /*!< Domain2 PCLK2 clock source */ + UART_CLOCKSOURCE_D3PCLK1 = 0x02U, /*!< Domain3 PCLK1 clock source */ + UART_CLOCKSOURCE_PLL2 = 0x04U, /*!< PLL2Q clock source */ + UART_CLOCKSOURCE_PLL3 = 0x08U, /*!< PLL3Q clock source */ + UART_CLOCKSOURCE_HSI = 0x10U, /*!< HSI clock source */ + UART_CLOCKSOURCE_CSI = 0x20U, /*!< CSI clock source */ + UART_CLOCKSOURCE_LSE = 0x40U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x80U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * This parameter can be a value of @ref UART_Reception_Type_Values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief HAL UART Rx Event type definition + * @note HAL UART Rx Event type value aims to identify which type of Event has occurred + * leading to call of the RxEvent callback. + * This parameter can be a value of @ref UART_RxEvent_Type_Values : + * HAL_UART_RXEVENT_TC = 0x00U, + * HAL_UART_RXEVENT_HT = 0x01U, + * HAL_UART_RXEVENT_IDLE = 0x02U, + */ +typedef uint32_t HAL_UART_RxEventTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef) +(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_Reception_Type_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values + * @{ + */ +#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ +#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ +#define HAL_UART_RXEVENT_IDLE (0x00000002U) /*!< RxEvent linked to IDLE event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +/** @brief Get UART clok division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256) ? 256U : 1U) + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Check whether or not UART instance is Low Power UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) + */ +#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on H7 (i.e. 100 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 12500001U) + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that LPUART frame number of stop bits is valid. + * @param __STOPBITS__ LPUART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32h7xx_hal_uart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/* Private variables -----------------------------------------------------------*/ +/** @defgroup UART_Private_variables UART Private variables + * @{ + */ +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_UART_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h new file mode 100644 index 0000000..5344695 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h @@ -0,0 +1,870 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_UART_EX_H +#define STM32H7xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#if defined(UART9) && defined(USART10) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_D2PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART1CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART2CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART3CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART4) \ + { \ + switch(__HAL_RCC_GET_UART4_SOURCE()) \ + { \ + case RCC_UART4CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_UART4CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART4CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART4CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART4CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART4CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if ((__HANDLE__)->Instance == UART5) \ + { \ + switch(__HAL_RCC_GET_UART5_SOURCE()) \ + { \ + case RCC_UART5CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_UART5CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART5CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART5CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART5CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART5CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + switch(__HAL_RCC_GET_USART6_SOURCE()) \ + { \ + case RCC_USART6CLKSOURCE_D2PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \ + break; \ + case RCC_USART6CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART6CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART6CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART6CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART6CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART7) \ + { \ + switch(__HAL_RCC_GET_UART7_SOURCE()) \ + { \ + case RCC_UART7CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_UART7CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART7CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART7CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART7CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART7CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART8) \ + { \ + switch(__HAL_RCC_GET_UART8_SOURCE()) \ + { \ + case RCC_UART8CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_UART8CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART8CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART8CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART8CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART8CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART9) \ + { \ + switch(__HAL_RCC_GET_UART9_SOURCE()) \ + { \ + case RCC_UART9CLKSOURCE_D2PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \ + break; \ + case RCC_UART9CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART9CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART9CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART9CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART9CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART10) \ + { \ + switch(__HAL_RCC_GET_USART10_SOURCE()) \ + { \ + case RCC_USART10CLKSOURCE_D2PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \ + break; \ + case RCC_USART10CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART10CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART10CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART10CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART10CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_D3PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D3PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_LPUART1CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#else +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_D2PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART1CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART2CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART3CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART4) \ + { \ + switch(__HAL_RCC_GET_UART4_SOURCE()) \ + { \ + case RCC_UART4CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_UART4CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART4CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART4CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART4CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART4CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if ((__HANDLE__)->Instance == UART5) \ + { \ + switch(__HAL_RCC_GET_UART5_SOURCE()) \ + { \ + case RCC_UART5CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_UART5CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART5CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART5CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART5CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART5CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + switch(__HAL_RCC_GET_USART6_SOURCE()) \ + { \ + case RCC_USART6CLKSOURCE_D2PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK2; \ + break; \ + case RCC_USART6CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_USART6CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_USART6CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART6CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_USART6CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART7) \ + { \ + switch(__HAL_RCC_GET_UART7_SOURCE()) \ + { \ + case RCC_UART7CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_UART7CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART7CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART7CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART7CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART7CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART8) \ + { \ + switch(__HAL_RCC_GET_UART8_SOURCE()) \ + { \ + case RCC_UART8CLKSOURCE_D2PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D2PCLK1; \ + break; \ + case RCC_UART8CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_UART8CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_UART8CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART8CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_UART8CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_D3PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_D3PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_PLL2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL2; \ + break; \ + case RCC_LPUART1CLKSOURCE_PLL3: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PLL3; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_CSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_CSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif /* UART9 && USART10 */ + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_UART_EX_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h new file mode 100644 index 0000000..4f15c6e --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h @@ -0,0 +1,6914 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_BUS_H +#define STM32H7xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH + * @{ + */ +#define LL_AHB3_GRP1_PERIPH_MDMA RCC_AHB3ENR_MDMAEN +#define LL_AHB3_GRP1_PERIPH_DMA2D RCC_AHB3ENR_DMA2DEN + +#if defined(JPEG) +#define LL_AHB3_GRP1_PERIPH_JPGDEC RCC_AHB3ENR_JPGDECEN +#endif /* JPEG */ + +#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN +#if defined(QUADSPI) +#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) +#define LL_AHB3_GRP1_PERIPH_OSPI1 RCC_AHB3ENR_OSPI1EN +#define LL_AHB3_GRP1_PERIPH_OSPI2 RCC_AHB3ENR_OSPI2EN +#endif /*(OCTOSPI1) || (OCTOSPI2)*/ +#if defined(OCTOSPIM) +#define LL_AHB3_GRP1_PERIPH_OCTOSPIM RCC_AHB3ENR_IOMNGREN +#endif /* OCTOSPIM */ +#if defined(OTFDEC1) || defined(OTFDEC2) +#define LL_AHB3_GRP1_PERIPH_OTFDEC1 RCC_AHB3ENR_OTFDEC1EN +#define LL_AHB3_GRP1_PERIPH_OTFDEC2 RCC_AHB3ENR_OTFDEC2EN +#endif /* (OTFDEC1) || (OTFDEC2) */ +#if defined(GFXMMU) +#define LL_AHB3_GRP1_PERIPH_GFXMMU RCC_AHB3ENR_GFXMMUEN +#endif /* GFXMMU */ +#define LL_AHB3_GRP1_PERIPH_SDMMC1 RCC_AHB3ENR_SDMMC1EN +#define LL_AHB3_GRP1_PERIPH_FLASH RCC_AHB3LPENR_FLASHLPEN +#define LL_AHB3_GRP1_PERIPH_DTCM1 RCC_AHB3LPENR_DTCM1LPEN +#define LL_AHB3_GRP1_PERIPH_DTCM2 RCC_AHB3LPENR_DTCM2LPEN +#define LL_AHB3_GRP1_PERIPH_ITCM RCC_AHB3LPENR_ITCMLPEN +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define LL_AHB3_GRP1_PERIPH_AXISRAM RCC_AHB3LPENR_AXISRAMLPEN +#else +#define LL_AHB3_GRP1_PERIPH_AXISRAM1 RCC_AHB3LPENR_AXISRAM1LPEN +#define LL_AHB3_GRP1_PERIPH_AXISRAM LL_AHB3_GRP1_PERIPH_AXISRAM1 /* for backward compatibility*/ +#endif /* RCC_AHB3LPENR_AXISRAMLPEN */ +#if defined(CD_AXISRAM2_BASE) +#define LL_AHB3_GRP1_PERIPH_AXISRAM2 RCC_AHB3LPENR_AXISRAM2LPEN +#endif /* CD_AXISRAM2_BASE */ +#if defined(CD_AXISRAM3_BASE) +#define LL_AHB3_GRP1_PERIPH_AXISRAM3 RCC_AHB3LPENR_AXISRAM3LPEN +#endif /* CD_AXISRAM3_BASE */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN +#define LL_AHB1_GRP1_PERIPH_ADC12 RCC_AHB1ENR_ADC12EN +#if defined(DUAL_CORE) +#define LL_AHB1_GRP1_PERIPH_ART RCC_AHB1ENR_ARTEN +#endif /* DUAL_CORE */ +#if defined(RCC_AHB1ENR_CRCEN) +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN +#endif /* RCC_AHB1ENR_CRCEN */ +#if defined(ETH) +#define LL_AHB1_GRP1_PERIPH_ETH1MAC RCC_AHB1ENR_ETH1MACEN +#define LL_AHB1_GRP1_PERIPH_ETH1TX RCC_AHB1ENR_ETH1TXEN +#define LL_AHB1_GRP1_PERIPH_ETH1RX RCC_AHB1ENR_ETH1RXEN +#endif /* ETH */ +#define LL_AHB1_GRP1_PERIPH_USB1OTGHS RCC_AHB1ENR_USB1OTGHSEN +#define LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI RCC_AHB1ENR_USB1OTGHSULPIEN +#if defined(USB2_OTG_FS) +#define LL_AHB1_GRP1_PERIPH_USB2OTGHS RCC_AHB1ENR_USB2OTGHSEN +#define LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI RCC_AHB1ENR_USB2OTGHSULPIEN +#endif /* USB2_OTG_FS */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH + * @{ + */ +#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN +#if defined(HSEM) && defined(RCC_AHB2ENR_HSEMEN) +#define LL_AHB2_GRP1_PERIPH_HSEM RCC_AHB2ENR_HSEMEN +#endif /* HSEM && RCC_AHB2ENR_HSEMEN */ +#if defined(CRYP) +#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN +#endif /* CRYP */ +#if defined(HASH) +#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN +#endif /* HASH */ +#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN +#define LL_AHB2_GRP1_PERIPH_SDMMC2 RCC_AHB2ENR_SDMMC2EN +#if defined(FMAC) +#define LL_AHB2_GRP1_PERIPH_FMAC RCC_AHB2ENR_FMACEN +#endif /* FMAC */ +#if defined(CORDIC) +#define LL_AHB2_GRP1_PERIPH_CORDIC RCC_AHB2ENR_CORDICEN +#endif /* CORDIC */ +#if defined(BDMA1) +#define LL_AHB2_GRP1_PERIPH_BDMA1 RCC_AHB2ENR_BDMA1EN +#endif /* BDMA1 */ +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define LL_AHB2_GRP1_PERIPH_D2SRAM1 RCC_AHB2ENR_D2SRAM1EN +#else +#define LL_AHB2_GRP1_PERIPH_AHBSRAM1 RCC_AHB2ENR_AHBSRAM1EN +#define LL_AHB2_GRP1_PERIPH_D2SRAM1 LL_AHB2_GRP1_PERIPH_AHBSRAM1 /* for backward compatibility*/ +#endif /* RCC_AHB2ENR_D2SRAM1EN */ +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define LL_AHB2_GRP1_PERIPH_D2SRAM2 RCC_AHB2ENR_D2SRAM2EN +#else +#define LL_AHB2_GRP1_PERIPH_AHBSRAM2 RCC_AHB2ENR_AHBSRAM2EN +#define LL_AHB2_GRP1_PERIPH_D2SRAM2 LL_AHB2_GRP1_PERIPH_AHBSRAM2 /* for backward compatibility*/ +#endif /* RCC_AHB2ENR_D2SRAM2EN */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define LL_AHB2_GRP1_PERIPH_D2SRAM3 RCC_AHB2ENR_D2SRAM3EN +#endif /* RCC_AHB2ENR_D2SRAM3EN */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_AHB4_GRP1_PERIPH AHB4 GRP1 PERIPH + * @{ + */ +#define LL_AHB4_GRP1_PERIPH_GPIOA RCC_AHB4ENR_GPIOAEN +#define LL_AHB4_GRP1_PERIPH_GPIOB RCC_AHB4ENR_GPIOBEN +#define LL_AHB4_GRP1_PERIPH_GPIOC RCC_AHB4ENR_GPIOCEN +#define LL_AHB4_GRP1_PERIPH_GPIOD RCC_AHB4ENR_GPIODEN +#define LL_AHB4_GRP1_PERIPH_GPIOE RCC_AHB4ENR_GPIOEEN +#define LL_AHB4_GRP1_PERIPH_GPIOF RCC_AHB4ENR_GPIOFEN +#define LL_AHB4_GRP1_PERIPH_GPIOG RCC_AHB4ENR_GPIOGEN +#define LL_AHB4_GRP1_PERIPH_GPIOH RCC_AHB4ENR_GPIOHEN +#if defined(GPIOI) +#define LL_AHB4_GRP1_PERIPH_GPIOI RCC_AHB4ENR_GPIOIEN +#endif /* GPIOI */ +#define LL_AHB4_GRP1_PERIPH_GPIOJ RCC_AHB4ENR_GPIOJEN +#define LL_AHB4_GRP1_PERIPH_GPIOK RCC_AHB4ENR_GPIOKEN +#if defined(RCC_AHB4ENR_CRCEN) +#define LL_AHB4_GRP1_PERIPH_CRC RCC_AHB4ENR_CRCEN +#endif /* RCC_AHB4ENR_CRCEN */ +#if defined(BDMA2) +#define LL_AHB4_GRP1_PERIPH_BDMA2 RCC_AHB4ENR_BDMA2EN +#define LL_AHB4_GRP1_PERIPH_BDMA LL_AHB4_GRP1_PERIPH_BDMA2 /* for backward compatibility*/ +#else +#define LL_AHB4_GRP1_PERIPH_BDMA RCC_AHB4ENR_BDMAEN +#endif /* BDMA2 */ +#if defined(ADC3) +#define LL_AHB4_GRP1_PERIPH_ADC3 RCC_AHB4ENR_ADC3EN +#endif /* ADC3 */ +#if defined(HSEM) && defined(RCC_AHB4ENR_HSEMEN) +#define LL_AHB4_GRP1_PERIPH_HSEM RCC_AHB4ENR_HSEMEN +#endif /* HSEM && RCC_AHB4ENR_HSEMEN*/ +#define LL_AHB4_GRP1_PERIPH_BKPRAM RCC_AHB4ENR_BKPRAMEN +#if defined(RCC_AHB4LPENR_SRAM4LPEN) +#define LL_AHB4_GRP1_PERIPH_SRAM4 RCC_AHB4LPENR_SRAM4LPEN +#define LL_AHB4_GRP1_PERIPH_D3SRAM1 LL_AHB4_GRP1_PERIPH_SRAM4 +#else +#define LL_AHB4_GRP1_PERIPH_SRDSRAM RCC_AHB4ENR_SRDSRAMEN +#define LL_AHB4_GRP1_PERIPH_SRAM4 LL_AHB4_GRP1_PERIPH_SRDSRAM /* for backward compatibility*/ +#define LL_AHB4_GRP1_PERIPH_D3SRAM1 LL_AHB4_GRP1_PERIPH_SRDSRAM /* for backward compatibility*/ +#endif /* RCC_AHB4ENR_D3SRAM1EN */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB3_GRP1_PERIPH APB3 GRP1 PERIPH + * @{ + */ +#if defined(LTDC) +#define LL_APB3_GRP1_PERIPH_LTDC RCC_APB3ENR_LTDCEN +#endif /* LTDC */ +#if defined(DSI) +#define LL_APB3_GRP1_PERIPH_DSI RCC_APB3ENR_DSIEN +#endif /* DSI */ +#define LL_APB3_GRP1_PERIPH_WWDG1 RCC_APB3ENR_WWDG1EN +#if defined(RCC_APB3ENR_WWDGEN) +#define LL_APB3_GRP1_PERIPH_WWDG LL_APB3_GRP1_PERIPH_WWDG1 /* for backward compatibility*/ +#endif /* RCC_APB3ENR_WWDGEN */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1LENR_TIM2EN +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1LENR_TIM3EN +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1LENR_TIM4EN +#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1LENR_TIM5EN +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1LENR_TIM6EN +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1LENR_TIM7EN +#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1LENR_TIM12EN +#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1LENR_TIM13EN +#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1LENR_TIM14EN +#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1LENR_LPTIM1EN +#if defined(DUAL_CORE) +#define LL_APB1_GRP1_PERIPH_WWDG2 RCC_APB1LENR_WWDG2EN +#endif /*DUAL_CORE*/ +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1LENR_SPI2EN +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1LENR_SPI3EN +#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1LENR_SPDIFRXEN +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1LENR_USART2EN +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1LENR_USART3EN +#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1LENR_UART4EN +#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1LENR_UART5EN +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1LENR_I2C1EN +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1LENR_I2C2EN +#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1LENR_I2C3EN +#if defined(I2C5) +#define LL_APB1_GRP1_PERIPH_I2C5 RCC_APB1LENR_I2C5EN +#endif /* I2C5 */ +#if defined(RCC_APB1LENR_CECEN) +#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1LENR_CECEN +#else +#define LL_APB1_GRP1_PERIPH_HDMICEC RCC_APB1LENR_HDMICECEN +#define LL_APB1_GRP1_PERIPH_CEC LL_APB1_GRP1_PERIPH_HDMICEC /* for backward compatibility*/ +#endif /* RCC_APB1LENR_CECEN */ +#define LL_APB1_GRP1_PERIPH_DAC12 RCC_APB1LENR_DAC12EN +#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1LENR_UART7EN +#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1LENR_UART8EN +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH + * @{ + */ +#define LL_APB1_GRP2_PERIPH_CRS RCC_APB1HENR_CRSEN +#define LL_APB1_GRP2_PERIPH_SWPMI1 RCC_APB1HENR_SWPMIEN +#define LL_APB1_GRP2_PERIPH_OPAMP RCC_APB1HENR_OPAMPEN +#define LL_APB1_GRP2_PERIPH_MDIOS RCC_APB1HENR_MDIOSEN +#define LL_APB1_GRP2_PERIPH_FDCAN RCC_APB1HENR_FDCANEN +#if defined(TIM23) +#define LL_APB1_GRP2_PERIPH_TIM23 RCC_APB1HENR_TIM23EN +#endif /* TIM23 */ +#if defined(TIM24) +#define LL_APB1_GRP2_PERIPH_TIM24 RCC_APB1HENR_TIM24EN +#endif /* TIM24 */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN +#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN +#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN +#if defined(UART9) +#define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN +#endif /* UART9 */ +#if defined(USART10) +#define LL_APB2_GRP1_PERIPH_USART10 RCC_APB2ENR_USART10EN +#endif /* USART10 */ +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN +#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN +#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN +#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN +#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN +#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN +#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN +#if defined(SAI2) +#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN +#endif /* SAI2 */ +#if defined(SAI3) +#define LL_APB2_GRP1_PERIPH_SAI3 RCC_APB2ENR_SAI3EN +#endif /* SAI3 */ +#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN +#if defined(HRTIM1) +#define LL_APB2_GRP1_PERIPH_HRTIM RCC_APB2ENR_HRTIMEN +#endif /* HRTIM1 */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB4_GRP1_PERIPH APB4 GRP1 PERIPH + * @{ + */ +#define LL_APB4_GRP1_PERIPH_SYSCFG RCC_APB4ENR_SYSCFGEN +#define LL_APB4_GRP1_PERIPH_LPUART1 RCC_APB4ENR_LPUART1EN +#define LL_APB4_GRP1_PERIPH_SPI6 RCC_APB4ENR_SPI6EN +#define LL_APB4_GRP1_PERIPH_I2C4 RCC_APB4ENR_I2C4EN +#define LL_APB4_GRP1_PERIPH_LPTIM2 RCC_APB4ENR_LPTIM2EN +#define LL_APB4_GRP1_PERIPH_LPTIM3 RCC_APB4ENR_LPTIM3EN +#if defined(LPTIM4) +#define LL_APB4_GRP1_PERIPH_LPTIM4 RCC_APB4ENR_LPTIM4EN +#endif /* LPTIM4 */ +#if defined(LPTIM5) +#define LL_APB4_GRP1_PERIPH_LPTIM5 RCC_APB4ENR_LPTIM5EN +#endif /* LPTIM5 */ +#if defined(DAC2) +#define LL_APB4_GRP1_PERIPH_DAC2 RCC_APB4ENR_DAC2EN +#endif /* DAC2 */ +#define LL_APB4_GRP1_PERIPH_COMP12 RCC_APB4ENR_COMP12EN +#define LL_APB4_GRP1_PERIPH_VREF RCC_APB4ENR_VREFEN +#define LL_APB4_GRP1_PERIPH_RTCAPB RCC_APB4ENR_RTCAPBEN +#if defined(SAI4) +#define LL_APB4_GRP1_PERIPH_SAI4 RCC_APB4ENR_SAI4EN +#endif /* SAI4 */ +#if defined(DTS) +#define LL_APB4_GRP1_PERIPH_DTS RCC_APB4ENR_DTSEN +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define LL_APB4_GRP1_PERIPH_DFSDM2 RCC_APB4ENR_DFSDM2EN +#endif /* DFSDM2_BASE */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_CLKAM_PERIPH CLKAM PERIPH + * @{ + */ +#if defined(RCC_D3AMR_BDMAAMEN) +#define LL_CLKAM_PERIPH_BDMA RCC_D3AMR_BDMAAMEN +#else +#define LL_CLKAM_PERIPH_BDMA2 RCC_SRDAMR_BDMA2AMEN +#define LL_CLKAM_PERIPH_BDMA LL_CLKAM_PERIPH_BDMA2 /* for backward compatibility*/ +#endif /* RCC_D3AMR_BDMAAMEN */ +#if defined(RCC_SRDAMR_GPIOAMEN) +#define LL_CLKAM_PERIPH_GPIO RCC_SRDAMR_GPIOAMEN +#endif /* RCC_SRDAMR_GPIOAMEN */ +#if defined(RCC_D3AMR_LPUART1AMEN) +#define LL_CLKAM_PERIPH_LPUART1 RCC_D3AMR_LPUART1AMEN +#else +#define LL_CLKAM_PERIPH_LPUART1 RCC_SRDAMR_LPUART1AMEN +#endif /* RCC_D3AMR_LPUART1AMEN */ +#if defined(RCC_D3AMR_SPI6AMEN) +#define LL_CLKAM_PERIPH_SPI6 RCC_D3AMR_SPI6AMEN +#else +#define LL_CLKAM_PERIPH_SPI6 RCC_SRDAMR_SPI6AMEN +#endif /* RCC_D3AMR_SPI6AMEN */ +#if defined(RCC_D3AMR_I2C4AMEN) +#define LL_CLKAM_PERIPH_I2C4 RCC_D3AMR_I2C4AMEN +#else +#define LL_CLKAM_PERIPH_I2C4 RCC_SRDAMR_I2C4AMEN +#endif /* RCC_D3AMR_I2C4AMEN */ +#if defined(RCC_D3AMR_LPTIM2AMEN) +#define LL_CLKAM_PERIPH_LPTIM2 RCC_D3AMR_LPTIM2AMEN +#else +#define LL_CLKAM_PERIPH_LPTIM2 RCC_SRDAMR_LPTIM2AMEN +#endif /* RCC_D3AMR_LPTIM2AMEN */ +#if defined(RCC_D3AMR_LPTIM3AMEN) +#define LL_CLKAM_PERIPH_LPTIM3 RCC_D3AMR_LPTIM3AMEN +#else +#define LL_CLKAM_PERIPH_LPTIM3 RCC_SRDAMR_LPTIM3AMEN +#endif /* RCC_D3AMR_LPTIM3AMEN */ +#if defined(RCC_D3AMR_LPTIM4AMEN) +#define LL_CLKAM_PERIPH_LPTIM4 RCC_D3AMR_LPTIM4AMEN +#endif /* RCC_D3AMR_LPTIM4AMEN */ +#if defined(RCC_D3AMR_LPTIM5AMEN) +#define LL_CLKAM_PERIPH_LPTIM5 RCC_D3AMR_LPTIM5AMEN +#endif /* RCC_D3AMR_LPTIM5AMEN */ +#if defined(DAC2) +#define LL_CLKAM_PERIPH_DAC2 RCC_SRDAMR_DAC2AMEN +#endif /* DAC2 */ +#if defined(RCC_D3AMR_COMP12AMEN) +#define LL_CLKAM_PERIPH_COMP12 RCC_D3AMR_COMP12AMEN +#else +#define LL_CLKAM_PERIPH_COMP12 RCC_SRDAMR_COMP12AMEN +#endif /* RCC_D3AMR_COMP12AMEN */ +#if defined(RCC_D3AMR_VREFAMEN) +#define LL_CLKAM_PERIPH_VREF RCC_D3AMR_VREFAMEN +#else +#define LL_CLKAM_PERIPH_VREF RCC_SRDAMR_VREFAMEN +#endif /* RCC_D3AMR_VREFAMEN */ +#if defined(RCC_D3AMR_RTCAMEN) +#define LL_CLKAM_PERIPH_RTC RCC_D3AMR_RTCAMEN +#else +#define LL_CLKAM_PERIPH_RTC RCC_SRDAMR_RTCAMEN +#endif /* RCC_D3AMR_RTCAMEN */ +#if defined(RCC_D3AMR_CRCAMEN) +#define LL_CLKAM_PERIPH_CRC RCC_D3AMR_CRCAMEN +#endif /* RCC_D3AMR_CRCAMEN */ +#if defined(SAI4) +#define LL_CLKAM_PERIPH_SAI4 RCC_D3AMR_SAI4AMEN +#endif /* SAI4 */ +#if defined(ADC3) +#define LL_CLKAM_PERIPH_ADC3 RCC_D3AMR_ADC3AMEN +#endif /* ADC3 */ +#if defined(RCC_SRDAMR_DTSAMEN) +#define LL_CLKAM_PERIPH_DTS RCC_SRDAMR_DTSAMEN +#endif /* RCC_SRDAMR_DTSAMEN */ +#if defined(RCC_D3AMR_DTSAMEN) +#define LL_CLKAM_PERIPH_DTS RCC_D3AMR_DTSAMEN +#endif /* RCC_D3AMR_DTSAMEN */ +#if defined(DFSDM2_BASE) +#define LL_CLKAM_PERIPH_DFSDM2 RCC_SRDAMR_DFSDM2AMEN +#endif /* DFSDM2_BASE */ +#if defined(RCC_D3AMR_BKPRAMAMEN) +#define LL_CLKAM_PERIPH_BKPRAM RCC_D3AMR_BKPRAMAMEN +#else +#define LL_CLKAM_PERIPH_BKPRAM RCC_SRDAMR_BKPRAMAMEN +#endif /* RCC_D3AMR_BKPRAMAMEN */ +#if defined(RCC_D3AMR_SRAM4AMEN) +#define LL_CLKAM_PERIPH_SRAM4 RCC_D3AMR_SRAM4AMEN +#else +#define LL_CLKAM_PERIPH_SRDSRAM RCC_SRDAMR_SRDSRAMAMEN +#define LL_CLKAM_PERIPH_SRAM4 LL_CLKAM_PERIPH_SRDSRAM +#endif /* RCC_D3AMR_SRAM4AMEN */ +/** + * @} + */ + +#if defined(RCC_CKGAENR_AXICKG) +/** @defgroup BUS_LL_EC_CKGA_PERIPH CKGA (AXI Clocks Gating) PERIPH + * @{ + */ +#define LL_CKGA_PERIPH_AXI RCC_CKGAENR_AXICKG +#define LL_CKGA_PERIPH_AHB RCC_CKGAENR_AHBCKG +#define LL_CKGA_PERIPH_CPU RCC_CKGAENR_CPUCKG +#define LL_CKGA_PERIPH_SDMMC RCC_CKGAENR_SDMMCCKG +#define LL_CKGA_PERIPH_MDMA RCC_CKGAENR_MDMACKG +#define LL_CKGA_PERIPH_DMA2D RCC_CKGAENR_DMA2DCKG +#define LL_CKGA_PERIPH_LTDC RCC_CKGAENR_LTDCCKG +#define LL_CKGA_PERIPH_GFXMMUM RCC_CKGAENR_GFXMMUMCKG +#define LL_CKGA_PERIPH_AHB12 RCC_CKGAENR_AHB12CKG +#define LL_CKGA_PERIPH_AHB34 RCC_CKGAENR_AHB34CKG +#define LL_CKGA_PERIPH_FLIFT RCC_CKGAENR_FLIFTCKG +#define LL_CKGA_PERIPH_OCTOSPI2 RCC_CKGAENR_OCTOSPI2CKG +#define LL_CKGA_PERIPH_FMC RCC_CKGAENR_FMCCKG +#define LL_CKGA_PERIPH_OCTOSPI1 RCC_CKGAENR_OCTOSPI1CKG +#define LL_CKGA_PERIPH_AXIRAM1 RCC_CKGAENR_AXIRAM1CKG +#define LL_CKGA_PERIPH_AXIRAM2 RCC_CKGAENR_AXIRAM2CKG +#define LL_CKGA_PERIPH_AXIRAM3 RCC_CKGAENR_AXIRAM3CKG +#define LL_CKGA_PERIPH_GFXMMUS RCC_CKGAENR_GFXMMUSCKG +#define LL_CKGA_PERIPH_ECCRAM RCC_CKGAENR_ECCRAMCKG +#define LL_CKGA_PERIPH_EXTI RCC_CKGAENR_EXTICKG +#define LL_CKGA_PERIPH_JTAG RCC_CKGAENR_JTAGCKG +/** + * @} + */ +#endif /* RCC_CKGAENR_AXICKG */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR DMA2DEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR JPGDECEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OSPI1EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OSPI2EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR IOMNGREN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR GFXMMUEN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR SDMMC1EN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR FLASHEN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR DTCM1EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR DTCM2EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR ITCMEN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR AXISRAMEN LL_AHB3_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DMA2DEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR JPGDECEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OSPI1EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OSPI2EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR IOMNGREN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR GFXMMUEN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR SDMMC1EN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FLASHEN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR DTCM1EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR DTCM2EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR ITCMEN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR AXISRAMEN LL_AHB3_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR DMA2DEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR JPGDECEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OSPI1EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OSPI2EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR IOMNGREN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR GFXMMUEN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR SDMMC1EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR FLASHEN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR DTCM1EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR DTCM2EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR ITCMEN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR AXISRAMEN LL_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3ENR, Periphs); +} + +/** + * @brief Force AHB3 peripherals reset. + * @rmtoll AHB3RSTR MDMARST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR DMA2DRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR JPGDECRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR OSPI2RST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR IOMNGRRST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR OTFDEC1RST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR OTFDEC2RST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR GFXMMURST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR SDMMC1RST LL_AHB3_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Release AHB3 peripherals reset. + * @rmtoll AHB3RSTR MDMARST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR DMA2DRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR JPGDECRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR OSPI2RST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR IOMNGRRST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR OTFDEC1RST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR OTFDEC2RST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR GFXMMURST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR SDMMC1RST LL_AHB3_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Enable AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OSPI1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OSPI2LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR IOMNGRLPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR GFXMMULPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR SDMMC1LPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FLASHLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR ITCMLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_AHB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR OSPI1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OSPI2LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR IOMNGRLPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR GFXMMULPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR SDMMC1LPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FLASHLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR ITCMLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_AHB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ARTEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ARTEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ARTEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1ENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR ADC12RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR ARTRST LL_AHB1_GRP1_ForceReset\n (*) + * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n (*) + * AHB1RSTR ETH1MACRST LL_AHB1_GRP1_ForceReset\n (*) + * AHB1RSTR USB1OTGHSRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR USB2OTGHSRST LL_AHB1_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR ADC12RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR ARTRST LL_AHB1_GRP1_ReleaseReset\n (*) + * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n (*) + * AHB1RSTR ETH1MACRST LL_AHB1_GRP1_ReleaseReset\n (*) + * AHB1RSTR USB1OTGHSRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR USB2OTGHSRST LL_AHB1_GRP1_ReleaseReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ADC12LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ARTLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR USB2OTGHSULPILPEN LL_AHB1_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ADC12LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ARTLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR USB1OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR USB2OTGHSULPILPEN LL_AHB1_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR HSEMEN LL_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR BDMA1EN LL_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR FMACEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR HSEMEN LL_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR BDMA1EN LL_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR FMACEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR HSEMEN LL_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR BDMA1EN LL_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR FMACEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2ENR, Periphs); +} + +/** + * @brief Force AHB2 peripherals reset. + * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR HSEMRST LL_AHB2_GRP1_ForceReset\n (*) + * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n (*) + * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n (*) + * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR BDMA1RST LL_AHB2_GRP1_ForceReset\n (*) + * AHB2RSTR FMACRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR CORDICRST LL_AHB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Release AHB2 peripherals reset. + * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR HSEMRST LL_AHB2_GRP1_ReleaseReset\n (*) + * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n (*) + * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n (*) + * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR BDMA1RST LL_AHB2_GRP1_ReleaseReset\n (*) + * AHB2RSTR FMACRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR CORDICRST LL_AHB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Enable AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR BDMA1LPEN LL_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR FMACLPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CORDICLPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM1LPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_AHB2_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR BDMA1LPEN LL_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR D2SRAM1LPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_AHB2_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB4 AHB4 + * @{ + */ + +/** + * @brief Enable AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOIEN LL_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR GPIOJEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOKEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR BDMAEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR ADC3EN LL_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR HSEMEN LL_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR SRAM4EN LL_AHB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB4 peripheral clock is enabled or not + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOIEN LL_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR GPIOJEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOKEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR BDMAEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR ADC3EN LL_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR HSEMEN LL_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR SRAM4EN LL_AHB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOIEN LL_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR GPIOJEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOKEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR BDMAEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR ADC3EN LL_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR HSEMEN LL_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR SRAM4EN LL_AHB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4ENR, Periphs); +} + +/** + * @brief Force AHB4 peripherals reset. + * @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOBRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOCRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIODRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOERST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOFRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOGRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOHRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOIRST LL_AHB4_GRP1_ForceReset\n (*) + * AHB4RSTR GPIOJRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOKRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR CRCRST LL_AHB4_GRP1_ForceReset\n (*) + * AHB4RSTR BDMARST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR ADC3RST LL_AHB4_GRP1_ForceReset\n (*) + * AHB4RSTR HSEMRST LL_AHB4_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB4RSTR, Periphs); +} + +/** + * @brief Release AHB4 peripherals reset. + * @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOBRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOCRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIODRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOERST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOFRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOGRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOHRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOIRST LL_AHB4_GRP1_ReleaseReset\n (*) + * AHB4RSTR GPIOJRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOKRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR CRCRST LL_AHB4_GRP1_ReleaseReset\n (*) + * AHB4RSTR BDMARST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR ADC3RST LL_AHB4_GRP1_ReleaseReset\n (*) + * AHB4RSTR HSEMRST LL_AHB4_GRP1_ReleaseReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4RSTR, Periphs); +} + +/** + * @brief Enable AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIODLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOELPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOILPEN LL_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR GPIOJLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR CRCLPEN LL_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR BDMALPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR ADC3LPEN LL_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_AHB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIODLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOELPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOILPEN LL_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR GPIOJLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR CRCLPEN LL_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR BDMALPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR ADC3LPEN LL_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_AHB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB3 APB3 + * @{ + */ + +/** + * @brief Enable APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_EnableClock\n (*) + * APB3ENR DSIEN LL_APB3_GRP1_EnableClock\n (*) + * APB3ENR WWDG1EN LL_APB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB3 peripheral clock is enabled or not + * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_IsEnabledClock\n (*) + * APB3ENR DSIEN LL_APB3_GRP1_IsEnabledClock\n (*) + * APB3ENR WWDG1EN LL_APB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_DisableClock\n + * APB3ENR DSIEN LL_APB3_GRP1_DisableClock\n + * APB3ENR WWDG1EN LL_APB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB3ENR, Periphs); +} + +/** + * @brief Force APB3 peripherals reset. + * @rmtoll APB3RSTR LTDCRST LL_APB3_GRP1_ForceReset\n (*) + * APB3RSTR DSIRST LL_APB3_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB3RSTR, Periphs); +} + +/** + * @brief Release APB3 peripherals reset. + * @rmtoll APB3RSTR LTDCRST LL_APB3_GRP1_ReleaseReset\n + * APB3RSTR DSIRST LL_APB3_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB3RSTR, Periphs); +} + +/** + * @brief Enable APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_APB3_GRP1_EnableClockSleep\n (*) + * APB3LPENR DSILPEN LL_APB3_GRP1_EnableClockSleep\n (*) + * APB3LPENR WWDG1LPEN LL_APB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_APB3_GRP1_DisableClockSleep\n (*) + * APB3LPENR DSILPEN LL_APB3_GRP1_DisableClockSleep\n (*) + * APB3LPENR WWDG1LPEN LL_APB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM3EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM4EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM5EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM6EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM7EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM12EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM13EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM14EN LL_APB1_GRP1_EnableClock\n + * APB1LENR LPTIM1EN LL_APB1_GRP1_EnableClock\n + * APB1LENR WWDG2EN LL_APB1_GRP1_EnableClock\n (*) + * APB1LENR SPI2EN LL_APB1_GRP1_EnableClock\n + * APB1LENR SPI3EN LL_APB1_GRP1_EnableClock\n + * APB1LENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n + * APB1LENR USART2EN LL_APB1_GRP1_EnableClock\n + * APB1LENR USART3EN LL_APB1_GRP1_EnableClock\n + * APB1LENR UART4EN LL_APB1_GRP1_EnableClock\n + * APB1LENR UART5EN LL_APB1_GRP1_EnableClock\n + * APB1LENR I2C1EN LL_APB1_GRP1_EnableClock\n + * APB1LENR I2C2EN LL_APB1_GRP1_EnableClock\n + * APB1LENR I2C3EN LL_APB1_GRP1_EnableClock\n + * APB1LENR I2C5EN LL_APB1_GRP1_EnableClock\n (*) + * APB1LENR CECEN LL_APB1_GRP1_EnableClock\n + * APB1LENR DAC12EN LL_APB1_GRP1_EnableClock\n + * APB1LENR UART7EN LL_APB1_GRP1_EnableClock\n + * APB1LENR UART8EN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1LENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1LENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR WWDG2EN LL_APB1_GRP1_IsEnabledClock\n (*) + * APB1LENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C5EN LL_APB1_GRP1_IsEnabledClock\n (*) + * APB1LENR CECEN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR DAC12EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART8EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1LENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM3EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM4EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM5EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM6EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM7EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM12EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM13EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM14EN LL_APB1_GRP1_DisableClock\n + * APB1LENR LPTIM1EN LL_APB1_GRP1_DisableClock\n + * APB1LENR WWDG2EN LL_APB1_GRP1_DisableClock\n (*) + * APB1LENR SPI2EN LL_APB1_GRP1_DisableClock\n + * APB1LENR SPI3EN LL_APB1_GRP1_DisableClock\n + * APB1LENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n + * APB1LENR USART2EN LL_APB1_GRP1_DisableClock\n + * APB1LENR USART3EN LL_APB1_GRP1_DisableClock\n + * APB1LENR UART4EN LL_APB1_GRP1_DisableClock\n + * APB1LENR UART5EN LL_APB1_GRP1_DisableClock\n + * APB1LENR I2C1EN LL_APB1_GRP1_DisableClock\n + * APB1LENR I2C2EN LL_APB1_GRP1_DisableClock\n + * APB1LENR I2C3EN LL_APB1_GRP1_DisableClock\n + * APB1LENR I2C5EN LL_APB1_GRP1_DisableClock\n (*) + * APB1LENR CECEN LL_APB1_GRP1_DisableClock\n + * APB1LENR DAC12EN LL_APB1_GRP1_DisableClock\n + * APB1LENR UART7EN LL_APB1_GRP1_DisableClock\n + * APB1LENR UART8EN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM3RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM4RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM5RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM6RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM7RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM12RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM13RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM14RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR SPI2RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR SPI3RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR USART2RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR USART3RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR UART4RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR UART5RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR I2C1RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR I2C2RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR I2C3RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR I2C5RST LL_APB1_GRP5_ForceReset\n (*) + * APB1LRSTR CECRST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR DAC12RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR UART7RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR UART8RST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1LRSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR USART2RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR USART3RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR UART4RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR UART5RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR I2C5RST LL_APB1_GRP1_ReleaseReset\n (*) + * APB1LRSTR CECRST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR DAC12RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR UART7RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR UART8RST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LRSTR, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM4LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM5LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM6LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM7LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM12LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM13LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM14LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_APB1_GRP1_EnableClockSleep\n (*) + * APB1LLPENR SPI2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPI3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART4LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART5LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C1LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C5LPEN LL_APB1_GRP1_EnableClockSleep\n (*) + * APB1LLPENR CECLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR DAC12LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART7LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART8LPEN LL_APB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1LLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1LLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM4LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM5LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM6LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM7LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM12LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM13LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM14LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_APB1_GRP1_DisableClockSleep\n (*) + * APB1LLPENR SPI2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPI3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART4LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART5LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C1LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C5LPEN LL_APB1_GRP1_DisableClockSleep\n (*) + * APB1LLPENR CECLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR DAC12LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART7LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART8LPEN LL_APB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LLPENR, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_EnableClock\n + * APB1HENR SWPMIEN LL_APB1_GRP2_EnableClock\n + * APB1HENR OPAMPEN LL_APB1_GRP2_EnableClock\n + * APB1HENR MDIOSEN LL_APB1_GRP2_EnableClock\n + * APB1HENR FDCANEN LL_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1HENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1HENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_IsEnabledClock\n + * APB1HENR SWPMIEN LL_APB1_GRP2_IsEnabledClock\n + * APB1HENR OPAMPEN LL_APB1_GRP2_IsEnabledClock\n + * APB1HENR MDIOSEN LL_APB1_GRP2_IsEnabledClock\n + * APB1HENR FDCANEN LL_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1HENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_DisableClock\n + * APB1HENR SWPMIEN LL_APB1_GRP2_DisableClock\n + * APB1HENR OPAMPEN LL_APB1_GRP2_DisableClock\n + * APB1HENR MDIOSEN LL_APB1_GRP2_DisableClock\n + * APB1HENR FDCANEN LL_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1HENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1HRSTR CRSRST LL_APB1_GRP2_ForceReset\n + * APB1HRSTR SWPMIRST LL_APB1_GRP2_ForceReset\n + * APB1HRSTR OPAMPRST LL_APB1_GRP2_ForceReset\n + * APB1HRSTR MDIOSRST LL_APB1_GRP2_ForceReset\n + * APB1HRSTR FDCANRST LL_APB1_GRP2_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1HRSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1HRSTR CRSRST LL_APB1_GRP2_ReleaseReset\n + * APB1HRSTR SWPMIRST LL_APB1_GRP2_ReleaseReset\n + * APB1HRSTR OPAMPRST LL_APB1_GRP2_ReleaseReset\n + * APB1HRSTR MDIOSRST LL_APB1_GRP2_ReleaseReset\n + * APB1HRSTR FDCANRST LL_APB1_GRP2_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1HRSTR, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR SWPMILPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR FDCANLPEN LL_APB1_GRP2_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1HLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1HLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR SWPMILPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR FDCANLPEN LL_APB1_GRP2_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1HLPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n + * APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n (*) + * APB2ENR USART10EN LL_APB2_GRP1_EnableClock\n (*) + * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI3EN LL_APB2_GRP1_EnableClock\n (*) + * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR HRTIMEN LL_APB2_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR USART10EN LL_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI3EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR HRTIMEN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n + * APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n (*) + * APB2ENR USART10EN LL_APB2_GRP1_DisableClock\n (*) + * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI3EN LL_APB2_GRP1_DisableClock\n (*) + * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR HRTIMEN LL_APB2_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n + * APB2ENR UART9RST LL_APB2_GRP1_ForceReset\n (*) + * APB2ENR USART10RST LL_APB2_GRP1_ForceReset\n (*) + * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI3RST LL_APB2_GRP1_ForceReset\n (*) + * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR HRTIMRST LL_APB2_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n + * APB2ENR UART9RST LL_APB2_GRP1_ReleaseReset\n (*) + * APB2ENR USART10RST LL_APB2_GRP1_ReleaseReset\n (*) + * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI3RST LL_APB2_GRP1_ReleaseReset\n (*) + * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR HRTIMRST LL_APB2_GRP1_ReleaseReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Enable APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2ENR UART9LPEN LL_APB2_GRP1_EnableClockSleep\n (*) + * APB2ENR USART10LPEN LL_APB2_GRP1_EnableClockSleep\n (*) + * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM15LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM16LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM17LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI3LPEN LL_APB2_GRP1_EnableClockSleep\n (*) + * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR HRTIMLPEN LL_APB2_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2ENR UART9LPEN LL_APB2_GRP1_DisableClockSleep\n (*) + * APB2ENR USART10LPEN LL_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM15LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM16LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM17LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI3LPEN LL_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR HRTIMLPEN LL_APB2_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB4 APB4 + * @{ + */ + +/** + * @brief Enable APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_EnableClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_EnableClock\n + * APB4ENR I2C4EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR LPTIM5EN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR DAC2EN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR COMP12EN LL_APB4_GRP1_EnableClock\n + * APB4ENR VREFEN LL_APB4_GRP1_EnableClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_EnableClock\n + * APB4ENR SAI4EN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR DTSEN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR DFSDM2EN LL_APB4_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB4 peripheral clock is enabled or not + * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR I2C4EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR LPTIM5EN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DAC2EN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR COMP12EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR VREFEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR SAI4EN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DTSEN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DFSDM2EN LL_APB4_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_DisableClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_DisableClock\n + * APB4ENR I2C4EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR LPTIM5EN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR DAC2EN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR COMP12EN LL_APB4_GRP1_DisableClock\n + * APB4ENR VREFEN LL_APB4_GRP1_DisableClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_DisableClock\n + * APB4ENR SAI4EN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR DTSEN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR DFSDM2EN LL_APB4_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4ENR, Periphs); +} + +/** + * @brief Force APB4 peripherals reset. + * @rmtoll APB4RSTR SYSCFGRST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPUART1RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR SPI6RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR I2C4RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM2RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM3RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM4RST LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR LPTIM5RST LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR DAC2EN LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR COMP12RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR VREFRST LL_APB4_GRP1_ForceReset\n + * APB4RSTR SAI4RST LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR DTSRST LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR DFSDM2RST LL_APB4_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB4RSTR, Periphs); +} + +/** + * @brief Release APB4 peripherals reset. + * @rmtoll APB4RSTR SYSCFGRST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPUART1RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR SPI6RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR I2C4RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM2RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM3RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM4RST LL_APB4_GRP1_ReleaseReset\n (*) + * APB4RSTR LPTIM5RST LL_APB4_GRP1_ReleaseReset\n (*) + * APB4RSTR DAC2RST LL_APB4_GRP1_ReleaseReset\n (*) + * APB4RSTR COMP12RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR VREFRST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR SAI4RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR DTSRST LL_APB4_GRP1_ReleaseReset\n (*) + * APB4RSTR DFSDM2RST LL_APB4_GRP1_ReleaseReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4RSTR, Periphs); +} + +/** + * @brief Enable APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPUART1LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SPI6LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR I2C4LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR LPTIM5LPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR DAC2LPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR COMP12LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR VREFLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SAI4LPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR DTSLPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR DFSDM2LPEN LL_APB4_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPUART1LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SPI6LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR I2C4LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR LPTIM5LPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR DAC2LPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR COMP12LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR VREFLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SAI4LPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR DTSLPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR DFSDM2LPEN LL_APB4_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_CLKAM CLKAM + * @{ + */ + +/** + * @brief Enable peripherals clock for CLKAM Mode. + * @rmtoll D3AMR / SRDAMR BDMA LL_CLKAM_Enable\n + * D3AMR / SRDAMR LPUART1 LL_CLKAM_Enable\n + * D3AMR / SRDAMR SPI6 LL_CLKAM_Enable\n + * D3AMR / SRDAMR I2C4 LL_CLKAM_Enable\n + * D3AMR / SRDAMR LPTIM2 LL_CLKAM_Enable\n + * D3AMR / SRDAMR LPTIM3 LL_CLKAM_Enable\n + * D3AMR / SRDAMR LPTIM4 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR LPTIM5 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR DAC2 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR COMP12 LL_CLKAM_Enable\n + * D3AMR / SRDAMR VREF LL_CLKAM_Enable\n + * D3AMR / SRDAMR RTC LL_CLKAM_Enable\n + * D3AMR / SRDAMR CRC LL_CLKAM_Enable\n + * D3AMR / SRDAMR SAI4 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR ADC3 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR DTS LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR DFSDM2 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR BKPRAM LL_CLKAM_Enable\n + * D3AMR / SRDAMR SRAM4 LL_CLKAM_Enable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CLKAM_PERIPH_BDMA + * @arg @ref LL_CLKAM_PERIPH_GPIO (*) + * @arg @ref LL_CLKAM_PERIPH_LPUART1 + * @arg @ref LL_CLKAM_PERIPH_SPI6 + * @arg @ref LL_CLKAM_PERIPH_I2C4 + * @arg @ref LL_CLKAM_PERIPH_LPTIM2 + * @arg @ref LL_CLKAM_PERIPH_LPTIM3 + * @arg @ref LL_CLKAM_PERIPH_LPTIM4 (*) + * @arg @ref LL_CLKAM_PERIPH_LPTIM5 (*) + * @arg @ref LL_CLKAM_PERIPH_DAC2 (*) + * @arg @ref LL_CLKAM_PERIPH_COMP12 + * @arg @ref LL_CLKAM_PERIPH_VREF + * @arg @ref LL_CLKAM_PERIPH_RTC + * @arg @ref LL_CLKAM_PERIPH_CRC (*) + * @arg @ref LL_CLKAM_PERIPH_SAI4 (*) + * @arg @ref LL_CLKAM_PERIPH_ADC3 (*) + * @arg @ref LL_CLKAM_PERIPH_DTS (*) + * @arg @ref LL_CLKAM_PERIPH_DFSDM2 (*) + * @arg @ref LL_CLKAM_PERIPH_BKPRAM + * @arg @ref LL_CLKAM_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_CLKAM_Enable(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + +#if defined(RCC_D3AMR_BDMAAMEN) + SET_BIT(RCC->D3AMR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->D3AMR, Periphs); +#else + SET_BIT(RCC->SRDAMR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->SRDAMR, Periphs); +#endif /* RCC_D3AMR_BDMAAMEN */ + (void)tmpreg; +} + +/** + * @brief Disable peripherals clock for CLKAM Mode. + * @rmtoll D3AMR / SRDAMR BDMA LL_CLKAM_Disable\n + * D3AMR / SRDAMR LPUART1 LL_CLKAM_Disable\n + * D3AMR / SRDAMR SPI6 LL_CLKAM_Disable\n + * D3AMR / SRDAMR I2C4 LL_CLKAM_Disable\n + * D3AMR / SRDAMR LPTIM2 LL_CLKAM_Disable\n + * D3AMR / SRDAMR LPTIM3 LL_CLKAM_Disable\n + * D3AMR / SRDAMR LPTIM4 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR LPTIM5 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR DAC2 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR COMP12 LL_CLKAM_Disable\n + * D3AMR / SRDAMR VREF LL_CLKAM_Disable\n + * D3AMR / SRDAMR RTC LL_CLKAM_Disable\n + * D3AMR / SRDAMR CRC LL_CLKAM_Disable\n + * D3AMR / SRDAMR SAI4 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR ADC3 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR DTS LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR DFSDM2 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR BKPRAM LL_CLKAM_Disable\n + * D3AMR / SRDAMR SRAM4 LL_CLKAM_Disable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CLKAM_PERIPH_BDMA + * @arg @ref LL_CLKAM_PERIPH_GPIO (*) + * @arg @ref LL_CLKAM_PERIPH_LPUART1 + * @arg @ref LL_CLKAM_PERIPH_SPI6 + * @arg @ref LL_CLKAM_PERIPH_I2C4 + * @arg @ref LL_CLKAM_PERIPH_LPTIM2 + * @arg @ref LL_CLKAM_PERIPH_LPTIM3 + * @arg @ref LL_CLKAM_PERIPH_LPTIM4 (*) + * @arg @ref LL_CLKAM_PERIPH_LPTIM5 (*) + * @arg @ref LL_CLKAM_PERIPH_DAC2 (*) + * @arg @ref LL_CLKAM_PERIPH_COMP12 + * @arg @ref LL_CLKAM_PERIPH_VREF + * @arg @ref LL_CLKAM_PERIPH_RTC + * @arg @ref LL_CLKAM_PERIPH_CRC (*) + * @arg @ref LL_CLKAM_PERIPH_SAI4 (*) + * @arg @ref LL_CLKAM_PERIPH_ADC3 (*) + * @arg @ref LL_CLKAM_PERIPH_DTS (*) + * @arg @ref LL_CLKAM_PERIPH_DFSDM2 (*) + * @arg @ref LL_CLKAM_PERIPH_BKPRAM + * @arg @ref LL_CLKAM_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_CLKAM_Disable(uint32_t Periphs) +{ +#if defined(RCC_D3AMR_BDMAAMEN) + CLEAR_BIT(RCC->D3AMR, Periphs); +#else + CLEAR_BIT(RCC->SRDAMR, Periphs); +#endif /* RCC_D3AMR_BDMAAMEN */ +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_CKGA CKGA + * @{ + */ + +#if defined(RCC_CKGAENR_AXICKG) + + +/** + * @brief Enable clock gating for AXI bus peripherals. + * @rmtoll CKGAENR AXICKG LL_CKGA_Enable\n + * CKGAENR AHBCKG LL_CKGA_Enable\n + * CKGAENR CPUCKG LL_CKGA_Enable\n + * CKGAENR SDMMCCKG LL_CKGA_Enable\n + * CKGAENR MDMACKG LL_CKGA_Enable\n + * CKGAENR DMA2DCKG LL_CKGA_Enable\n + * CKGAENR LTDCCKG LL_CKGA_Enable\n + * CKGAENR GFXMMUMCKG LL_CKGA_Enable\n + * CKGAENR AHB12CKG LL_CKGA_Enable\n + * CKGAENR AHB34CKG LL_CKGA_Enable\n + * CKGAENR FLIFTCKG LL_CKGA_Enable\n + * CKGAENR OCTOSPI2CKG LL_CKGA_Enable\n + * CKGAENR FMCCKG LL_CKGA_Enable\n + * CKGAENR OCTOSPI1CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM1CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM2CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM3CKG LL_CKGA_Enable\n + * CKGAENR GFXMMUSCKG LL_CKGA_Enable\n + * CKGAENR ECCRAMCKG LL_CKGA_Enable\n + * CKGAENR EXTICKG LL_CKGA_Enable\n + * CKGAENR JTAGCKG LL_CKGA_Enable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CKGA_PERIPH_AXI + * @arg @ref LL_CKGA_PERIPH_AHB + * @arg @ref LL_CKGA_PERIPH_CPU + * @arg @ref LL_CKGA_PERIPH_SDMMC + * @arg @ref LL_CKGA_PERIPH_MDMA + * @arg @ref LL_CKGA_PERIPH_DMA2D + * @arg @ref LL_CKGA_PERIPH_LTDC + * @arg @ref LL_CKGA_PERIPH_GFXMMUM + * @arg @ref LL_CKGA_PERIPH_AHB12 + * @arg @ref LL_CKGA_PERIPH_AHB34 + * @arg @ref LL_CKGA_PERIPH_FLIFT + * @arg @ref LL_CKGA_PERIPH_OCTOSPI2 + * @arg @ref LL_CKGA_PERIPH_FMC + * @arg @ref LL_CKGA_PERIPH_OCTOSPI1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM2 + * @arg @ref LL_CKGA_PERIPH_AXIRAM3 + * @arg @ref LL_CKGA_PERIPH_GFXMMUS + * @arg @ref LL_CKGA_PERIPH_ECCRAM + * @arg @ref LL_CKGA_PERIPH_EXTI + * @arg @ref LL_CKGA_PERIPH_JTAG + * @retval None +*/ +__STATIC_INLINE void LL_CKGA_Enable(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->CKGAENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->CKGAENR, Periphs); + (void)tmpreg; +} + +#endif /* RCC_CKGAENR_AXICKG */ + +#if defined(RCC_CKGAENR_AXICKG) + +/** + * @brief Disable clock gating for AXI bus peripherals. + * @rmtoll CKGAENR AXICKG LL_CKGA_Enable\n + * CKGAENR AHBCKG LL_CKGA_Enable\n + * CKGAENR CPUCKG LL_CKGA_Enable\n + * CKGAENR SDMMCCKG LL_CKGA_Enable\n + * CKGAENR MDMACKG LL_CKGA_Enable\n + * CKGAENR DMA2DCKG LL_CKGA_Enable\n + * CKGAENR LTDCCKG LL_CKGA_Enable\n + * CKGAENR GFXMMUMCKG LL_CKGA_Enable\n + * CKGAENR AHB12CKG LL_CKGA_Enable\n + * CKGAENR AHB34CKG LL_CKGA_Enable\n + * CKGAENR FLIFTCKG LL_CKGA_Enable\n + * CKGAENR OCTOSPI2CKG LL_CKGA_Enable\n + * CKGAENR FMCCKG LL_CKGA_Enable\n + * CKGAENR OCTOSPI1CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM1CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM2CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM3CKG LL_CKGA_Enable\n + * CKGAENR GFXMMUSCKG LL_CKGA_Enable\n + * CKGAENR ECCRAMCKG LL_CKGA_Enable\n + * CKGAENR EXTICKG LL_CKGA_Enable\n + * CKGAENR JTAGCKG LL_CKGA_Enable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CKGA_PERIPH_AXI + * @arg @ref LL_CKGA_PERIPH_AHB + * @arg @ref LL_CKGA_PERIPH_CPU + * @arg @ref LL_CKGA_PERIPH_SDMMC + * @arg @ref LL_CKGA_PERIPH_MDMA + * @arg @ref LL_CKGA_PERIPH_DMA2D + * @arg @ref LL_CKGA_PERIPH_LTDC + * @arg @ref LL_CKGA_PERIPH_GFXMMUM + * @arg @ref LL_CKGA_PERIPH_AHB12 + * @arg @ref LL_CKGA_PERIPH_AHB34 + * @arg @ref LL_CKGA_PERIPH_FLIFT + * @arg @ref LL_CKGA_PERIPH_OCTOSPI2 + * @arg @ref LL_CKGA_PERIPH_FMC + * @arg @ref LL_CKGA_PERIPH_OCTOSPI1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM2 + * @arg @ref LL_CKGA_PERIPH_AXIRAM3 + * @arg @ref LL_CKGA_PERIPH_GFXMMUS + * @arg @ref LL_CKGA_PERIPH_ECCRAM + * @arg @ref LL_CKGA_PERIPH_EXTI + * @arg @ref LL_CKGA_PERIPH_JTAG + * @retval None +*/ +__STATIC_INLINE void LL_CKGA_Disable(uint32_t Periphs) +{ + CLEAR_BIT(RCC->CKGAENR, Periphs); +} + +#endif /* RCC_CKGAENR_AXICKG */ + +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @addtogroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable C1 AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_EnableClock\n + * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_EnableClock\n + * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_EnableClock\n + * AHB3ENR FMCEN LL_C1_AHB3_GRP1_EnableClock\n + * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR GFXMMUEN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FMCEN LL_C1_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR GFXMMUEN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->AHB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_DisableClock\n + * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_DisableClock\n + * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_DisableClock\n + * AHB3ENR FMCEN LL_C1_AHB3_GRP1_DisableClock\n + * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR GFXMMUEN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB3ENR, Periphs); +} + +/** + * @brief Enable C1 AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FMCLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR QSPILPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OSPI1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OSPI2LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR IOMNGRLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR GFXMMULPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR SDMMC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FLASHLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR ITCMLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_C1_AHB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FMCLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR QSPILPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OSPI1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OSPI2LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR IOMNGRLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR GFXMMULPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR SDMMC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FLASHLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR ITCMLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_C1_AHB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable C1 AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR CRCEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ARTEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR CRCEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ARTEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->AHB1ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR CRCEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ARTEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB1ENR, Periphs); +} + +/** + * @brief Enable C1 AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR DMA2LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ADC12LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR CRCLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ARTLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1MACLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1TXLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1RXLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR USB1OTGHSLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR USB2OTGHSULPILPEN LL_C1_AHB1_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR DMA2LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ADC12LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR CRCLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ARTLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1MACLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1TXLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1RXLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR USB1OTGHSLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR USB2OTGHSULPILPEN LL_C1_AHB1_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable C1 AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR HASHEN LL_C1_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR RNGEN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR HASHEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR RNGEN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->AHB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR HASHEN LL_C1_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR RNGEN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB2ENR, Periphs); +} + +/** + * @brief Enable C1 AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CRYPLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR HASHLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR RNGLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM1LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR BDAM1LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR D2SRAM2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_C1_AHB2_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR CRYPLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR HASHLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR RNGLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR BDAM1LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR D2SRAM1LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_C1_AHB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB4 AHB4 + * @{ + */ + +/** + * @brief Enable C1 AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR CRCEN LL_C1_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 AHB4 peripheral clock is enabled or not + * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR CRCEN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->AHB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR CRCEN LL_C1_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB4ENR, Periphs); +} + +/** + * @brief Enable C1 AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIODLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOELPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOILPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOJLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR CRCLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR BDMALPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR ADC3LPEN LL_C1_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR BKPRAMLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_C1_AHB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIODLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOELPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOILPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOJLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR CRCLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR BDMALPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR ADC3LPEN LL_C1_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR BKPRAMLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_C1_AHB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB3 APB3 + * @{ + */ + +/** + * @brief Enable C1 APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_EnableClock\n (*) + * APB3ENR DSIEN LL_C1_APB3_GRP1_EnableClock\n (*) + * APB3ENR WWDG1EN LL_C1_APB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB3 peripheral clock is enabled or not + * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_IsEnabledClock\n (*) + * APB3ENR DSIEN LL_C1_APB3_GRP1_IsEnabledClock\n (*) + * APB3ENR WWDG1EN LL_C1_APB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_APB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_DisableClock\n (*) + * APB3ENR DSIEN LL_C1_APB3_GRP1_DisableClock\n (*) + * APB3ENR WWDG1EN LL_C1_APB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB3ENR, Periphs); +} + +/** + * @brief Enable C1 APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_C1_APB3_GRP1_EnableClockSleep\n (*) + * APB3LPENR DSILPEN LL_C1_APB3_GRP1_EnableClockSleep\n (*) + * APB3LPENR WWDG1LPEN LL_C1_APB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_C1_APB3_GRP1_DisableClockSleep\n (*) + * APB3LPENR DSILPEN LL_C1_APB3_GRP1_DisableClockSleep\n (*) + * APB3LPENR WWDG1LPEN LL_C1_APB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable C1 APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM3EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM4EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM5EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM6EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM7EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM12EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM13EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM14EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR WWDG2EN LL_C1_APB1_GRP1_EnableClock\n (*) + * APB1LENR SPI2EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR SPI3EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR USART2EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR USART3EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR UART4EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR UART5EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR I2C1EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR I2C2EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR I2C3EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR CECEN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR DAC12EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR UART7EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR UART8EN LL_C1_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB1LENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB1LENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB1 peripheral clock is enabled or not + * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM3EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM4EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM5EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM6EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM7EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM12EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM13EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM14EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR WWDG2EN LL_C1_APB1_GRP1_IsEnabledClock\n (*) + * APB1LENR SPI2EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPI3EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART2EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART3EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART4EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART5EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C1EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C2EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C3EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR CECEN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR DAC12EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART7EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART8EN LL_C1_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB1LENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM3EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM4EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM5EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM6EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM7EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM12EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM13EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM14EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR WWDG2EN LL_C1_APB1_GRP1_DisableClock\n (*) + * APB1LENR SPI2EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR SPI3EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR USART2EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR USART3EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR UART4EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR UART5EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR I2C1EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR I2C2EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR I2C3EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR CECEN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR DAC12EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR UART7EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR UART8EN LL_C1_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE void LL_C1_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB1LENR, Periphs); +} + +/** + * @brief Enable C1 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM4LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM5LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM6LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM7LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM12LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM13LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM14LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n (*) + * APB1LLPENR SPI2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPI3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART4LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART5LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C1LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR CECLPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR DAC12LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART7LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART8LPEN LL_C1_APB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB1LLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB1LLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM4LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM5LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM6LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM7LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM12LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM13LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM14LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n (*) + * APB1LLPENR SPI2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPI3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART4LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART5LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C1LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR CECLPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR DAC12LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART7LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART8LPEN LL_C1_APB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB1LLPENR, Periphs); +} + +/** + * @brief Enable C1 APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_EnableClock\n + * APB1HENR SWPMIEN LL_C1_APB1_GRP2_EnableClock\n + * APB1HENR OPAMPEN LL_C1_APB1_GRP2_EnableClock\n + * APB1HENR MDIOSEN LL_C1_APB1_GRP2_EnableClock\n + * APB1HENR FDCANEN LL_C1_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB1HENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB1HENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB1 peripheral clock is enabled or not + * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_IsEnabledClock\n + * APB1HENR SWPMIEN LL_C1_APB1_GRP2_IsEnabledClock\n + * APB1HENR OPAMPEN LL_C1_APB1_GRP2_IsEnabledClock\n + * APB1HENR MDIOSEN LL_C1_APB1_GRP2_IsEnabledClock\n + * APB1HENR FDCANEN LL_C1_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB1HENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_DisableClock\n + * APB1HENR SWPMIEN LL_C1_APB1_GRP2_DisableClock\n + * APB1HENR OPAMPEN LL_C1_APB1_GRP2_DisableClock\n + * APB1HENR MDIOSEN LL_C1_APB1_GRP2_DisableClock\n + * APB1HENR FDCANEN LL_C1_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB1HENR, Periphs); +} + +/** + * @brief Enable C1 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_C1_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR SWPMILPEN LL_C1_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_C1_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_C1_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR FDCANLPEN LL_C1_APB1_GRP2_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP2_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB1HLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB1HLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_C1_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR SWPMILPEN LL_C1_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_C1_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_C1_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR FDCANLPEN LL_C1_APB1_GRP2_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP2_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB1HLPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable C1 APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR USART6EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR UART9EN LL_C1_APB2_GRP1_EnableClock\n (*) + * APB2ENR USART10EN LL_C1_APB2_GRP1_EnableClock\n (*) + * APB2ENR SPI1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SPI4EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SPI5EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SAI3EN LL_C1_APB2_GRP1_EnableClock\n (*) + * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR HRTIMEN LL_C1_APB2_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART6EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR UART9EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR USART10EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR SPI1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI4EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI5EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI3EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR HRTIMEN LL_C1_APB2_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE uint32_t LL_C1_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR USART6EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR UART9EN LL_C1_APB2_GRP1_DisableClock\n (*) + * APB2ENR USART10EN LL_C1_APB2_GRP1_DisableClock\n (*) + * APB2ENR SPI1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SPI4EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SPI5EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SAI3EN LL_C1_APB2_GRP1_DisableClock\n (*) + * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR HRTIMEN LL_C1_APB2_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB2ENR, Periphs); +} + +/** + * @brief Enable C1 APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM8LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART6LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2ENR UART9EN LL_C1_APB2_GRP1_EnableClockSleep\n (*) + * APB2ENR USART10EN LL_C1_APB2_GRP1_EnableClockSleep\n (*) + * APB2LPENR SPI1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI4LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM15LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM16LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM17LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI5LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI2LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI3LPEN LL_C1_APB2_GRP1_EnableClockSleep\n (*) + * APB2LPENR DFSDM1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR HRTIMLPEN LL_C1_APB2_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM8LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR UART9LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR USART10LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR USART6LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI4LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM15LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM16LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM17LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI5LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI2LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI3LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR DFSDM1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR HRTIMLPEN LL_C1_APB2_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB4 APB4 + * @{ + */ + +/** + * @brief Enable C1 APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR LPUART1EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR SPI6EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR I2C4EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR DAC2EN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR COMP12EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR VREFEN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR SAI4EN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR DTSEN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB4 peripheral clock is enabled or not + * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPUART1EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR SPI6EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR I2C4EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR COMP12EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR VREFEN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR SAI4EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DTSEN LL_C1_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_APB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR LPUART1EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR SPI6EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR I2C4EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_DisableClock\n (*) + * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_DisableClock\n (*) + * APB4ENR COMP12EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR VREFEN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR SAI4EN LL_C1_APB4_GRP1_DisableClock\n (*) + * APB4ENR DTSEN LL_C1_APB4_GRP1_DisableClock\n (*) + * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB4ENR, Periphs); +} + +/** + * @brief Enable C1 APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPUART1LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SPI6LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR I2C4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR LPTIM4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR LPTIM5LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR COMP12LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR VREFLPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SAI4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) + * APB4ENR DTSLPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) + * APB4ENR DFSDM2LPEN LL_C1_APB4_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPUART1LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SPI6LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR I2C4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM5LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR COMP12LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR VREFLPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SAI4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n (*) + * APB4ENR DTSLPEN LL_C1_APB4_GRP1_DisableClockSleep\n (*) + * APB4ENR DFSDM2LPEN LL_C1_APB4_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable C2 AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR FMCEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FMCEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->AHB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR FMCEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB3ENR, Periphs); +} + +/** + * @brief Enable C2 AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FMCLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR QSPILPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR SDMMC1LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FLASHLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR ITCMLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_C2_AHB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FMCLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR QSPILPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR SDMMC1LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FLASHLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR ITCMLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_C2_AHB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable C2 AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ARTEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ARTEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->AHB1ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ARTEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB1ENR, Periphs); +} + +/** + * @brief Enable C2 AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR DMA2LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ADC12LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ARTLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1MACLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1TXLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1RXLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB2OTGHSULPILPEN LL_C2_AHB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR DMA2LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ADC12LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ARTLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1MACLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1TXLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1RXLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB1OTGHSLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB2OTGHSULPILPEN LL_C2_AHB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable C2 AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_EnableClock\n + * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_EnableClock\n + * AHB2ENR HASHEN LL_C2_AHB2_GRP1_EnableClock\n + * AHB2ENR RNGEN LL_C2_AHB2_GRP1_EnableClock\n + * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR HASHEN LL_C2_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR RNGEN LL_C2_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->AHB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_DisableClock\n + * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_DisableClock\n + * AHB2ENR HASHEN LL_C2_AHB2_GRP1_DisableClock\n + * AHB2ENR RNGEN LL_C2_AHB2_GRP1_DisableClock\n + * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB2ENR, Periphs); +} + +/** + * @brief Enable C2 AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CRYPLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR HASHLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR RNGLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM1LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_C2_AHB2_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR CRYPLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR HASHLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR RNGLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM1LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_C2_AHB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB4 AHB4 + * @{ + */ + +/** + * @brief Enable C2 AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR CRCEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 AHB4 peripheral clock is enabled or not + * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR CRCEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->AHB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR CRCEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB4ENR, Periphs); +} + +/** + * @brief Enable C2 AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIODLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOELPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOILPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOJLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR CRCLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR BDMALPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR ADC3LPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR BKPRAMLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_C2_AHB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIODLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOELPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOILPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOJLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR CRCLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR BDMALPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR ADC3LPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR BKPRAMLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_C2_AHB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB3 APB3 + * @{ + */ + +/** + * @brief Enable C2 APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_EnableClock\n + * APB3ENR DSIEN LL_C2_APB3_GRP1_EnableClock\n + * APB3ENR WWDG1EN LL_C2_APB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB3 peripheral clock is enabled or not + * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_IsEnabledClock\n + * APB3ENR DSIEN LL_C2_APB3_GRP1_IsEnabledClock\n + * APB3ENR WWDG1EN LL_C2_APB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_DisableClock\n + * APB3ENR DSIEN LL_C2_APB3_GRP1_DisableClock\n + * APB3ENR WWDG1EN LL_C2_APB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB3ENR, Periphs); +} + +/** + * @brief Enable C2 APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_C2_APB3_GRP1_EnableClockSleep\n + * APB3LPENR DSILPEN LL_C2_APB3_GRP1_EnableClockSleep\n + * APB3LPENR WWDG1LPEN LL_C2_APB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_C2_APB3_GRP1_DisableClockSleep\n + * APB3LPENR DSILPEN LL_C2_APB3_GRP1_DisableClockSleep\n + * APB3LPENR WWDG1LPEN LL_C2_APB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable C2 APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM3EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM4EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM5EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM6EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM7EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM12EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM13EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM14EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR WWDG2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR SPI2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR SPI3EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR USART2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR USART3EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR UART4EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR UART5EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR I2C1EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR I2C2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR I2C3EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR CECEN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR DAC12EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR UART7EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR UART8EN LL_C2_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB1LENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB1LENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB1 peripheral clock is enabled or not + * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM3EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM4EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM5EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM6EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM7EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM12EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM13EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM14EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR WWDG2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPI2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPI3EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART3EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART4EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART5EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C1EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C3EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR CECEN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR DAC12EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART7EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART8EN LL_C2_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB1LENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM3EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM4EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM5EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM6EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM7EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM12EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM13EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM14EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR WWDG2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR SPI2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR SPI3EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR USART2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR USART3EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR UART4EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR UART5EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR I2C1EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR I2C2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR I2C3EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR CECEN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR DAC12EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR UART7EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR UART8EN LL_C2_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB1LENR, Periphs); +} + +/** + * @brief Enable C2 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM4LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM5LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM6LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM7LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM12LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM13LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM14LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPI2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPI3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART4LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART5LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C1LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR CECLPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR DAC12LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART7LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART8LPEN LL_C2_APB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB1LLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB1LLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM4LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM5LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM6LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM7LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM12LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM13LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM14LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPI2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPI3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART4LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART5LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C1LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR CECLPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR DAC12LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART7LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART8LPEN LL_C2_APB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB1LLPENR, Periphs); +} + +/** + * @brief Enable C2 APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_EnableClock\n + * APB1HENR SWPMIEN LL_C2_APB1_GRP2_EnableClock\n + * APB1HENR OPAMPEN LL_C2_APB1_GRP2_EnableClock\n + * APB1HENR MDIOSEN LL_C2_APB1_GRP2_EnableClock\n + * APB1HENR FDCANEN LL_C2_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB1HENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB1HENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB1 peripheral clock is enabled or not + * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_IsEnabledClock\n + * APB1HENR SWPMIEN LL_C2_APB1_GRP2_IsEnabledClock\n + * APB1HENR OPAMPEN LL_C2_APB1_GRP2_IsEnabledClock\n + * APB1HENR MDIOSEN LL_C2_APB1_GRP2_IsEnabledClock\n + * APB1HENR FDCANEN LL_C2_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB1HENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_DisableClock\n + * APB1HENR SWPMIEN LL_C2_APB1_GRP2_DisableClock\n + * APB1HENR OPAMPEN LL_C2_APB1_GRP2_DisableClock\n + * APB1HENR MDIOSEN LL_C2_APB1_GRP2_DisableClock\n + * APB1HENR FDCANEN LL_C2_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB1HENR, Periphs); +} + +/** + * @brief Enable C2 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_C2_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR SWPMILPEN LL_C2_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_C2_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_C2_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR FDCANLPEN LL_C2_APB1_GRP2_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP2_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB1HLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB1HLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_C2_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR SWPMILPEN LL_C2_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_C2_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_C2_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR FDCANLPEN LL_C2_APB1_GRP2_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP2_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB1HLPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable C2 APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR USART6EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SPI1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SPI4EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SPI5EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SAI3EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR HRTIMEN LL_C2_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART6EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI4EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI5EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI3EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR HRTIMEN LL_C2_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR USART6EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SPI1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SPI4EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SPI5EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SAI3EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR HRTIMEN LL_C2_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB2ENR, Periphs); +} + +/** + * @brief Enable C2 APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM8LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART6LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI4LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM15LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM16LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM17LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI5LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI2LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI3LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR DFSDM1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR HRTIMLPEN LL_C2_APB2_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM8LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART6LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI4LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM15LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM16LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM17LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI5LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI2LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI3LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR DFSDM1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR HRTIMLPEN LL_C2_APB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB4 APB4 + * @{ + */ + +/** + * @brief Enable C2 APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPUART1EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR SPI6EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR I2C4EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR COMP12EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR VREFEN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR SAI4EN LL_C2_APB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB4 peripheral clock is enabled or not + * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPUART1EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR SPI6EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR I2C4EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR COMP12EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR VREFEN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR SAI4EN LL_C2_APB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPUART1EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR SPI6EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR I2C4EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR COMP12EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR VREFEN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR SAI4EN LL_C2_APB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB4ENR, Periphs); +} + +/** + * @brief Enable C2 APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPUART1LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SPI6LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR I2C4LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM5LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR COMP12LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR VREFLPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SAI4LPEN LL_C2_APB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPUART1LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SPI6LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR I2C4LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM5LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR COMP12LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR VREFLPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SAI4LPEN LL_C2_APB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB4LPENR, Periphs); +} + +/** + * @} + */ + +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_BUS_H */ + + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h new file mode 100644 index 0000000..2b63e8f --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h @@ -0,0 +1,669 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (+) API to access to MCU info (CPUID register) + (+) API to enable fault handler (SHCSR accesses) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_CORTEX_H +#define STM32H7xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000UL /*!< AHB clock divided by 8 selected as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type + * @{ + */ +#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */ +#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */ +#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */ +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000UL /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0x00UL /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 0x01UL /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 0x02UL /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 0x03UL /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 0x04UL /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 0x05UL /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 0x06UL /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 0x07UL /*!< REGION Number 7 */ +#if !defined(CORE_CM4) +#define LL_MPU_REGION_NUMBER8 0x08UL /*!< REGION Number 8 */ +#define LL_MPU_REGION_NUMBER9 0x09UL /*!< REGION Number 9 */ +#define LL_MPU_REGION_NUMBER10 0x0AUL /*!< REGION Number 10 */ +#define LL_MPU_REGION_NUMBER11 0x0BUL /*!< REGION Number 11 */ +#define LL_MPU_REGION_NUMBER12 0x0CUL /*!< REGION Number 12 */ +#define LL_MPU_REGION_NUMBER13 0x0DUL /*!< REGION Number 13 */ +#define LL_MPU_REGION_NUMBER14 0x0EUL /*!< REGION Number 14 */ +#define LL_MPU_REGION_NUMBER15 0x0FUL /*!< REGION Number 15 */ +#endif /* !defined(CORE_CM4) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_32B (0x04UL << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64B (0x05UL << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128B (0x06UL << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256B (0x07UL << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08UL << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09UL << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AUL << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BUL << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CUL << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DUL << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EUL << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FUL << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10UL << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11UL << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12UL << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13UL << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14UL << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15UL << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16UL << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17UL << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18UL << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19UL << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AUL << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BUL << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CUL << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DUL << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EUL << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FUL << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0x00UL << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (0x01UL << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (0x02UL << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (0x03UL << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (0x05UL << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (0x06UL << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0x00UL << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (0x01UL << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (0x02UL << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ + +/* Legacy Define */ +#define LL_MPU_TEX_LEVEL4 (0x04UL << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00UL /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00UL /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00UL /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00UL /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return (((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + MODIFY_REG(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK, Source); +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return (uint32_t)(READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK)); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return ((READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_HANDLER HANDLER + * @{ + */ + +/** + * @brief Enable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault) +{ + /* Enable the system handler fault */ + SET_BIT(SCB->SHCSR, Fault); +} + +/** + * @brief Disable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault) +{ + /* Disable the system handler fault */ + CLEAR_BIT(SCB->SHCSR, Fault); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Constant number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant + * @retval Value should be equal to 0xF for Cortex-M7 and Cortex-M4 devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC27 for Cortex-M7 and equal to 0xC24 for Cortex-M4 + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return ((READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @note For cortex-M4 only 8 regions are available i.e only values from LL_MPU_REGION_NUMBER0 to LL_MPU_REGION_NUMBER7 are possible. + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB + * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB + * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB + * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS + * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @note For cortex-M4 only 8 regions are available i.e only values from LL_MPU_REGION_NUMBER0 to LL_MPU_REGION_NUMBER7 are possible. + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos))); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @note For cortex-M4 only 8 regions are available i.e only values from LL_MPU_REGION_NUMBER0 to LL_MPU_REGION_NUMBER7 are possible. + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_CORTEX_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h new file mode 100644 index 0000000..86ce847 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h @@ -0,0 +1,780 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_crs.h + * @author MCD Application Team + * @brief Header file of CRS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_CRS_H +#define STM32H7xx_LL_CRS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants + * @{ + */ + +/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_CRS_ReadReg function + * @{ + */ +#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF +#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF +#define LL_CRS_ISR_ERRF CRS_ISR_ERRF +#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF +#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR +#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS +#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF +/** + * @} + */ + +/** @defgroup CRS_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions + * @{ + */ +#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE +#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE +#define LL_CRS_CR_ERRIE CRS_CR_ERRIE +#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider + * @{ + */ +#define LL_CRS_SYNC_DIV_1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source + * @{ + */ +#define LL_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity + * @{ + */ +#define LL_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction + * @{ + */ +#define LL_CRS_FREQ_ERROR_DIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define LL_CRS_FREQ_ERROR_DIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values + * @{ + */ +/** + * @brief Reset value of the RELOAD field + * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz + * and a synchronization signal frequency of 1 kHz (SOF signal from USB) + */ +#define LL_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU + +/** + * @brief Reset value of Frequency error limit. + */ +#define LL_CRS_ERRORLIMIT_DEFAULT 0x00000022U + +/** + * @brief Reset value of the HSI48 Calibration field + * @note The default value is 64, which corresponds to the middle of the trimming interval. + * The trimming step is specified in the product datasheet. + * A higher TRIM value corresponds to a higher output frequency. + */ +#define LL_CRS_HSI48CALIBRATION_DEFAULT 0x00000020U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros + * @{ + */ + +/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload + * @{ + */ + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between + * the target frequency and the frequency of the synchronization source after + * prescaling. It is then decreased by one in order to reach the expected + * synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval Reload value (in Hz) + */ +#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions + * @{ + */ + +/** @defgroup CRS_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable Frequency error counter + * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified + * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void) +{ + SET_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Disable Frequency error counter + * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Check if Frequency error counter is enabled or not + * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void) +{ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Disable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Check if Automatic trimming is enabled or not + * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN)) ? 1UL : 0UL); +} + +/** + * @brief Set HSI48 oscillator smooth trimming + * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only + * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming + * @param Value a number between Min_Data = 0 and Max_Data = 127 + * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos); +} + +/** + * @brief Get HSI48 oscillator smooth trimming + * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming + * @retval a number between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void) +{ + return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); +} + +/** + * @brief Set counter reload value + * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter + * @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF + * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT + * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_) + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value); +} + +/** + * @brief Get counter reload value + * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter + * @retval a number between Min_Data = 0 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); +} + +/** + * @brief Set frequency error limit + * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit + * @param Value a number between Min_Data = 0 and Max_Data = 255 + * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Get frequency error limit + * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit + * @retval A number between Min_Data = 0 and Max_Data = 255 + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Set division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider); +} + +/** + * @brief Get division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV)); +} + +/** + * @brief Set SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source); +} + +/** + * @brief Get SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC)); +} + +/** + * @brief Set input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity); +} + +/** + * @brief Get input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL)); +} + +/** + * @brief Configure CRS for the synchronization + * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n + * CFGR RELOAD LL_CRS_ConfigSynchronization\n + * CFGR FELIM LL_CRS_ConfigSynchronization\n + * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n + * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n + * CFGR SYNCPOL LL_CRS_ConfigSynchronization + * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 63 + * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF + * @param ReloadValue a number between Min_Data = 0 and Max_Data = 255 + * @param Settings This parameter can be a combination of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8 + * or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128 + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB + * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue); + MODIFY_REG(CRS->CFGR, + CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL, + ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_CRS_Management CRS_Management + * @{ + */ + +/** + * @brief Generate software SYNC event + * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Get the frequency error direction latched in the time of the last + * SYNC event + * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP + * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Get the frequency error counter value latched in the time of the last SYNC event + * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture + * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if SYNC event OK signal occurred or not + * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC warning signal occurred or not + * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Synchronization or trimming error signal occurred or not + * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Expected SYNC signal occurred or not + * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC error signal occurred or not + * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC missed error signal occurred or not + * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS)) ? 1UL : 0UL); +} + +/** + * @brief Check if Trimming overflow or underflow occurred or not + * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the SYNC event OK flag + * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); +} + +/** + * @brief Clear the SYNC warning flag + * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); +} + +/** + * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also + * the ERR flag + * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); +} + +/** + * @brief Clear Expected SYNC flag + * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Disable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Check if SYNC event OK interrupt is enabled or not + * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Disable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Check if SYNC warning interrupt is enabled or not + * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ERR(void) +{ + SET_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Disable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ERR(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Check if Synchronization or trimming error interrupt is enabled or not + * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Disable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Check if Expected SYNC interrupt is enabled or not + * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRS_DeInit(void); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_CRS_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_delayblock.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_delayblock.h new file mode 100644 index 0000000..4733bc7 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_delayblock.h @@ -0,0 +1,93 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_delayblock.h + * @author MCD Application Team + * @brief Header file of Delay Block module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_DLYB_H +#define STM32H7xx_LL_DLYB_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup DELAYBLOCK_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DELAYBLOCK_LL_Exported_Types DELAYBLOCK_LL Exported Types + * @{ + */ + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DLYB_Exported_Constants Delay Block Exported Constants + * @{ + */ + + +#define DLYB_MAX_UNIT ((uint32_t)0x00000080U) /*!< Max UNIT value (128) */ +#define DLYB_MAX_SELECT ((uint32_t)0x0000000CU) /*!< Max SELECT value (12) */ + +/** + * @} + */ + +/** @addtogroup DelayBlock_LL_Exported_Functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup HAL_DELAY_LL_Group1 + * @{ + */ +HAL_StatusTypeDef DelayBlock_Enable(DLYB_TypeDef *DLYBx); +HAL_StatusTypeDef DelayBlock_Disable(DLYB_TypeDef *DLYBx); +HAL_StatusTypeDef DelayBlock_Configure(DLYB_TypeDef *DLYBx, uint32_t PhaseSel, uint32_t Units); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + /** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_DLYB_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h new file mode 100644 index 0000000..c05815a --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h @@ -0,0 +1,3322 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_DMA_H +#define STM32H7xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include "stm32h7xx_ll_dmamux.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA stream register offset versus stream index LL_DMA_STREAM_x */ +static const uint8_t LL_DMA_STR_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Stream0_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream5_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream6_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream7_BASE - DMA1_BASE) +}; + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Macros DMA LL Private Macros + * @{ + */ +/** + * @brief Helper macro to convert DMA Instance DMAx into DMAMUX channel + * @note DMAMUX channel 0 to 7 are mapped to DMA1 stream 0 to 7. + * DMAMUX channel 8 to 15 are mapped to DMA2 stream 0 to 7. + * @param __DMA_INSTANCE__ DMAx + * @retval Channel_Offset (LL_DMAMUX_CHANNEL_8 or 0). + */ +#define LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(__DMA_INSTANCE__) \ +(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) ? 0UL : 8UL) +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Stream + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMAMUX1_Request_selection + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetStreamPriorityLevel(). */ + + uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. + This parameter can be a value of @ref DMA_LL_FIFOMODE + @note The Direct mode (FIFO mode disabled) cannot be used if the + memory-to-memory data transfer is configured on the selected stream + + This feature can be modified afterwards using unitary functions @ref LL_DMA_EnableFifoMode() or @ref LL_DMA_EnableFifoMode() . */ + + uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. + This parameter can be a value of @ref DMA_LL_EC_FIFOTHRESHOLD + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetFIFOThreshold(). */ + + uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_LL_EC_MBURST + @note The burst mode is possible only if the address Increment mode is enabled. + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryBurstxfer(). */ + + uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_LL_EC_PBURST + @note The burst mode is possible only if the address Increment mode is enabled. + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphBurstxfer(). */ + + uint32_t DoubleBufferMode; /*!< Specifies the double buffer mode. + This parameter can be a value of @ref DMA_LL_EC_DOUBLEBUFFER_MODE + + This feature can be modified afterwards using unitary function @ref LL_DMA_EnableDoubleBufferMode() & LL_DMA_DisableDoubleBufferMode(). */ + + uint32_t TargetMemInDoubleBufferMode; /*!< Specifies the target memory in double buffer mode. + This parameter can be a value of @ref DMA_LL_EC_CURRENTTARGETMEM + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetCurrentTargetMem(). */ +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_LL_EC_STREAM STREAM + * @{ + */ +#define LL_DMA_STREAM_0 0x00000000U +#define LL_DMA_STREAM_1 0x00000001U +#define LL_DMA_STREAM_2 0x00000002U +#define LL_DMA_STREAM_3 0x00000003U +#define LL_DMA_STREAM_4 0x00000004U +#define LL_DMA_STREAM_5 0x00000005U +#define LL_DMA_STREAM_6 0x00000006U +#define LL_DMA_STREAM_7 0x00000007U +#define LL_DMA_STREAM_ALL 0xFFFF0000U +/** + * @} + */ + + +/** @defgroup DMA_LL_EC_DIRECTION DIRECTION + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE MODE + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_SxCR_CIRC /*!< Circular Mode */ +#define LL_DMA_MODE_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DOUBLEBUFFER_MODE DOUBLE BUFFER MODE + * @{ + */ +#define LL_DMA_DOUBLEBUFFER_MODE_DISABLE 0x00000000U /*!< Disable double buffering mode */ +#define LL_DMA_DOUBLEBUFFER_MODE_ENABLE DMA_SxCR_DBM /*!< Enable double buffering mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CURRENTTARGETMEM CURRENTTARGETMEM + * @{ + */ +#define LL_DMA_CURRENTTARGETMEM0 0x00000000U /*!< Set CurrentTarget Memory to Memory 0 */ +#define LL_DMA_CURRENTTARGETMEM1 DMA_SxCR_CT /*!< Set CurrentTarget Memory to Memory 1 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH PERIPH + * @{ + */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +#define LL_DMA_PERIPH_INCREMENT DMA_SxCR_PINC /*!< Peripheral increment mode Enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY MEMORY + * @{ + */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +#define LL_DMA_MEMORY_INCREMENT DMA_SxCR_MINC /*!< Memory increment mode Enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_OFFSETSIZE OFFSETSIZE + * @{ + */ +#define LL_DMA_OFFSETSIZE_PSIZE 0x00000000U /*!< Peripheral increment offset size is linked to the PSIZE */ +#define LL_DMA_OFFSETSIZE_FIXEDTO4 DMA_SxCR_PINCOS /*!< Peripheral increment offset size is fixed to 4 (32-bit alignment) */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY PRIORITY + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_SxCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_LL_EC_MBURST MBURST + * @{ + */ +#define LL_DMA_MBURST_SINGLE 0x00000000U /*!< Memory burst single transfer configuration */ +#define LL_DMA_MBURST_INC4 DMA_SxCR_MBURST_0 /*!< Memory burst of 4 beats transfer configuration */ +#define LL_DMA_MBURST_INC8 DMA_SxCR_MBURST_1 /*!< Memory burst of 8 beats transfer configuration */ +#define LL_DMA_MBURST_INC16 (DMA_SxCR_MBURST_0 | DMA_SxCR_MBURST_1) /*!< Memory burst of 16 beats transfer configuration */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PBURST PBURST + * @{ + */ +#define LL_DMA_PBURST_SINGLE 0x00000000U /*!< Peripheral burst single transfer configuration */ +#define LL_DMA_PBURST_INC4 DMA_SxCR_PBURST_0 /*!< Peripheral burst of 4 beats transfer configuration */ +#define LL_DMA_PBURST_INC8 DMA_SxCR_PBURST_1 /*!< Peripheral burst of 8 beats transfer configuration */ +#define LL_DMA_PBURST_INC16 (DMA_SxCR_PBURST_0 | DMA_SxCR_PBURST_1) /*!< Peripheral burst of 16 beats transfer configuration */ +/** + * @} + */ + +/** @defgroup DMA_LL_FIFOMODE DMA_LL_FIFOMODE + * @{ + */ +#define LL_DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable (direct mode is enabled) */ +#define LL_DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_FIFOSTATUS_0 FIFOSTATUS 0 + * @{ + */ +#define LL_DMA_FIFOSTATUS_0_25 0x00000000U /*!< 0 < fifo_level < 1/4 */ +#define LL_DMA_FIFOSTATUS_25_50 DMA_SxFCR_FS_0 /*!< 1/4 < fifo_level < 1/2 */ +#define LL_DMA_FIFOSTATUS_50_75 DMA_SxFCR_FS_1 /*!< 1/2 < fifo_level < 3/4 */ +#define LL_DMA_FIFOSTATUS_75_100 (DMA_SxFCR_FS_1 | DMA_SxFCR_FS_0) /*!< 3/4 < fifo_level < full */ +#define LL_DMA_FIFOSTATUS_EMPTY DMA_SxFCR_FS_2 /*!< FIFO is empty */ +#define LL_DMA_FIFOSTATUS_FULL (DMA_SxFCR_FS_2 | DMA_SxFCR_FS_0) /*!< FIFO is full */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_FIFOTHRESHOLD FIFOTHRESHOLD + * @{ + */ +#define LL_DMA_FIFOTHRESHOLD_1_4 0x00000000U /*!< FIFO threshold 1 quart full configuration */ +#define LL_DMA_FIFOTHRESHOLD_1_2 DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */ +#define LL_DMA_FIFOTHRESHOLD_3_4 DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */ +#define LL_DMA_FIFOTHRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxStreamy + * @{ + */ +/** + * @brief Convert DMAx_Streamy into DMAx + * @param __STREAM_INSTANCE__ DMAx_Streamy + * @retval DMAx + */ +#define __LL_DMA_GET_INSTANCE(__STREAM_INSTANCE__) \ +(((uint32_t)(__STREAM_INSTANCE__) > ((uint32_t)DMA1_Stream7)) ? DMA2 : DMA1) + +/** + * @brief Convert DMAx_Streamy into LL_DMA_STREAM_y + * @param __STREAM_INSTANCE__ DMAx_Streamy + * @retval LL_DMA_STREAM_y + */ +#define __LL_DMA_GET_STREAM(__STREAM_INSTANCE__) \ +(((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream0)) ? LL_DMA_STREAM_0 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream0)) ? LL_DMA_STREAM_0 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream1)) ? LL_DMA_STREAM_1 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream1)) ? LL_DMA_STREAM_1 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream2)) ? LL_DMA_STREAM_2 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream2)) ? LL_DMA_STREAM_2 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream3)) ? LL_DMA_STREAM_3 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream3)) ? LL_DMA_STREAM_3 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream4)) ? LL_DMA_STREAM_4 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream4)) ? LL_DMA_STREAM_4 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream5)) ? LL_DMA_STREAM_5 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream5)) ? LL_DMA_STREAM_5 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream6)) ? LL_DMA_STREAM_6 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream6)) ? LL_DMA_STREAM_6 : \ + LL_DMA_STREAM_7) + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_STREAM_y into DMAx_Streamy + * @param __DMA_INSTANCE__ DMAx + * @param __STREAM__ LL_DMA_STREAM_y + * @retval DMAx_Streamy + */ +#define __LL_DMA_GET_STREAM_INSTANCE(__DMA_INSTANCE__, __STREAM__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA1_Stream0 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA2_Stream0 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA1_Stream1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA2_Stream1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA1_Stream2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA2_Stream2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA1_Stream3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA2_Stream3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA1_Stream4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA2_Stream4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA1_Stream5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA2_Stream5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA1_Stream6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA2_Stream6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_7))) ? DMA1_Stream7 : \ + DMA2_Stream7) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA stream. + * @rmtoll CR EN LL_DMA_EnableStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_EN); +} + +/** + * @brief Disable DMA stream. + * @rmtoll CR EN LL_DMA_DisableStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_EN); +} + +/** + * @brief Check if DMA stream is enabled or disabled. + * @rmtoll CR EN LL_DMA_IsEnabledStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_EN) == (DMA_SxCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure all parameters linked to DMA transfer. + * @rmtoll CR DIR LL_DMA_ConfigTransfer\n + * CR CIRC LL_DMA_ConfigTransfer\n + * CR PINC LL_DMA_ConfigTransfer\n + * CR MINC LL_DMA_ConfigTransfer\n + * CR PSIZE LL_DMA_ConfigTransfer\n + * CR MSIZE LL_DMA_ConfigTransfer\n + * CR PL LL_DMA_ConfigTransfer\n + * CR PFCTRL LL_DMA_ConfigTransfer\n + * CR DBM LL_DMA_ConfigTransfer\n + * CR CT LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR or @ref LL_DMA_MODE_PFCTRL + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @arg @ref LL_DMA_DOUBLEBUFFER_MODE_DISABLE or @ref LL_DMA_DOUBLEBUFFER_MODE_ENABLE + * @arg @ref LL_DMA_CURRENTTARGETMEM0 or @ref LL_DMA_CURRENTTARGETMEM1 + *@retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, + DMA_SxCR_DIR | DMA_SxCR_CIRC | DMA_SxCR_PINC | DMA_SxCR_MINC | DMA_SxCR_PSIZE | DMA_SxCR_MSIZE | DMA_SxCR_PL | \ + DMA_SxCR_PFCTRL | DMA_SxCR_DBM | DMA_SxCR_CT, Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CR DIR LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DIR, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CR DIR LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DIR)); +} + +/** + * @brief Set DMA mode normal, circular or peripheral flow control. + * @rmtoll CR CIRC LL_DMA_SetMode\n + * CR PFCTRL LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_MODE_PFCTRL + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL, Mode); +} + +/** + * @brief Get DMA mode normal, circular or peripheral flow control. + * @rmtoll CR CIRC LL_DMA_GetMode\n + * CR PFCTRL LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_MODE_PFCTRL + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param IncrementMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PINC, IncrementMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_PERIPH_INCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param IncrementMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MINC, IncrementMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Size This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PSIZE, Size); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Size This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MSIZE, Size); +} + +/** + * @brief Get Memory size. + * @rmtoll CR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MSIZE)); +} + +/** + * @brief Set Peripheral increment offset size. + * @rmtoll CR PINCOS LL_DMA_SetIncOffsetSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param OffsetSize This parameter can be one of the following values: + * @arg @ref LL_DMA_OFFSETSIZE_PSIZE + * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t OffsetSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PINCOS, OffsetSize); +} + +/** + * @brief Get Peripheral increment offset size. + * @rmtoll CR PINCOS LL_DMA_GetIncOffsetSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_OFFSETSIZE_PSIZE + * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 + */ +__STATIC_INLINE uint32_t LL_DMA_GetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PINCOS)); +} + +/** + * @brief Set Stream priority level. + * @rmtoll CR PL LL_DMA_SetStreamPriorityLevel + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Priority) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PL, Priority); +} + +/** + * @brief Get Stream priority level. + * @rmtoll CR PL LL_DMA_GetStreamPriorityLevel + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PL)); +} + +/** + * @brief Enable DMA stream bufferable transfer. + * @rmtoll CR TRBUFF LL_DMA_EnableBufferableTransfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableBufferableTransfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TRBUFF); +} + +/** + * @brief Disable DMA stream bufferable transfer. + * @rmtoll CR TRBUFF LL_DMA_DisableBufferableTransfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableBufferableTransfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TRBUFF); +} + +/** + * @brief Set Number of data to transfer. + * @rmtoll NDTR NDT LL_DMA_SetDataLength + * @note This action has no effect if + * stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param NbData Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t NbData) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->NDTR, DMA_SxNDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @rmtoll NDTR NDT LL_DMA_GetDataLength + * @note Once the stream is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->NDTR, DMA_SxNDT)); +} +/** + * @brief Set DMA request for DMA Streams on DMAMUX Channel x. + * @note DMAMUX channel 0 to 7 are mapped to DMA1 stream 0 to 7. + * DMAMUX channel 8 to 15 are mapped to DMA2 stream 0 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_MEM2MEM + * @arg @ref LL_DMAMUX1_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX1_REQ_ADC1 + * @arg @ref LL_DMAMUX1_REQ_ADC2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM1_UP + * @arg @ref LL_DMAMUX1_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM1_COM + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM2_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM3_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM4_UP + * @arg @ref LL_DMAMUX1_REQ_I2C1_RX + * @arg @ref LL_DMAMUX1_REQ_I2C1_TX + * @arg @ref LL_DMAMUX1_REQ_I2C2_RX + * @arg @ref LL_DMAMUX1_REQ_I2C2_TX + * @arg @ref LL_DMAMUX1_REQ_SPI1_RX + * @arg @ref LL_DMAMUX1_REQ_SPI1_TX + * @arg @ref LL_DMAMUX1_REQ_SPI2_RX + * @arg @ref LL_DMAMUX1_REQ_SPI2_TX + * @arg @ref LL_DMAMUX1_REQ_USART1_RX + * @arg @ref LL_DMAMUX1_REQ_USART1_TX + * @arg @ref LL_DMAMUX1_REQ_USART2_RX + * @arg @ref LL_DMAMUX1_REQ_USART2_TX + * @arg @ref LL_DMAMUX1_REQ_USART3_RX + * @arg @ref LL_DMAMUX1_REQ_USART3_TX + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM8_UP + * @arg @ref LL_DMAMUX1_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM8_COM + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM5_UP + * @arg @ref LL_DMAMUX1_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX1_REQ_SPI3_RX + * @arg @ref LL_DMAMUX1_REQ_SPI3_TX + * @arg @ref LL_DMAMUX1_REQ_UART4_RX + * @arg @ref LL_DMAMUX1_REQ_UART4_TX + * @arg @ref LL_DMAMUX1_REQ_UART5_RX + * @arg @ref LL_DMAMUX1_REQ_UART5_TX + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM6_UP + * @arg @ref LL_DMAMUX1_REQ_TIM7_UP + * @arg @ref LL_DMAMUX1_REQ_USART6_RX + * @arg @ref LL_DMAMUX1_REQ_USART6_TX + * @arg @ref LL_DMAMUX1_REQ_I2C3_RX + * @arg @ref LL_DMAMUX1_REQ_I2C3_TX + * @arg @ref LL_DMAMUX1_REQ_DCMI_PSSI (*) + * @arg @ref LL_DMAMUX1_REQ_CRYP_IN + * @arg @ref LL_DMAMUX1_REQ_CRYP_OUT + * @arg @ref LL_DMAMUX1_REQ_HASH_IN + * @arg @ref LL_DMAMUX1_REQ_UART7_RX + * @arg @ref LL_DMAMUX1_REQ_UART7_TX + * @arg @ref LL_DMAMUX1_REQ_UART8_RX + * @arg @ref LL_DMAMUX1_REQ_UART8_TX + * @arg @ref LL_DMAMUX1_REQ_SPI4_RX + * @arg @ref LL_DMAMUX1_REQ_SPI4_TX + * @arg @ref LL_DMAMUX1_REQ_SPI5_RX + * @arg @ref LL_DMAMUX1_REQ_SPI5_TX + * @arg @ref LL_DMAMUX1_REQ_SAI1_A + * @arg @ref LL_DMAMUX1_REQ_SAI1_B + * @arg @ref LL_DMAMUX1_REQ_SAI2_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI2_B (*) + * @arg @ref LL_DMAMUX1_REQ_SWPMI_RX + * @arg @ref LL_DMAMUX1_REQ_SWPMI_TX + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_DT + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_CS + * @arg @ref LL_DMAMUX1_REQ_HRTIM_MASTER (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_A (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_B (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_C (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_D (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_E (*) + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX1_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM15_UP + * @arg @ref LL_DMAMUX1_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM15_COM + * @arg @ref LL_DMAMUX1_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM16_UP + * @arg @ref LL_DMAMUX1_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM17_UP + * @arg @ref LL_DMAMUX1_REQ_SAI3_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI3_B (*) + * @arg @ref LL_DMAMUX1_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_RX (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_TX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_RX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_TX (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_WRITE (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_WRITE(*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_RX (*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_TX (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_TRIG (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_TRIG (*) + * + * @note (*) Availability depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Request) +{ + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(uint32_t)((uint32_t)DMAMUX1_Channel0 + (DMAMUX_CCR_SIZE * (Stream)) + (uint32_t)(DMAMUX_CCR_SIZE * LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(DMAx))))->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 7 are mapped to DMA1 stream 0 to 7. + * DMAMUX channel 8 to 15 are mapped to DMA2 stream 0 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_MEM2MEM + * @arg @ref LL_DMAMUX1_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX1_REQ_ADC1 + * @arg @ref LL_DMAMUX1_REQ_ADC2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM1_UP + * @arg @ref LL_DMAMUX1_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM1_COM + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM2_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM3_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM4_UP + * @arg @ref LL_DMAMUX1_REQ_I2C1_RX + * @arg @ref LL_DMAMUX1_REQ_I2C1_TX + * @arg @ref LL_DMAMUX1_REQ_I2C2_RX + * @arg @ref LL_DMAMUX1_REQ_I2C2_TX + * @arg @ref LL_DMAMUX1_REQ_SPI1_RX + * @arg @ref LL_DMAMUX1_REQ_SPI1_TX + * @arg @ref LL_DMAMUX1_REQ_SPI2_RX + * @arg @ref LL_DMAMUX1_REQ_SPI2_TX + * @arg @ref LL_DMAMUX1_REQ_USART1_RX + * @arg @ref LL_DMAMUX1_REQ_USART1_TX + * @arg @ref LL_DMAMUX1_REQ_USART2_RX + * @arg @ref LL_DMAMUX1_REQ_USART2_TX + * @arg @ref LL_DMAMUX1_REQ_USART3_RX + * @arg @ref LL_DMAMUX1_REQ_USART3_TX + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM8_UP + * @arg @ref LL_DMAMUX1_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM8_COM + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM5_UP + * @arg @ref LL_DMAMUX1_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX1_REQ_SPI3_RX + * @arg @ref LL_DMAMUX1_REQ_SPI3_TX + * @arg @ref LL_DMAMUX1_REQ_UART4_RX + * @arg @ref LL_DMAMUX1_REQ_UART4_TX + * @arg @ref LL_DMAMUX1_REQ_UART5_RX + * @arg @ref LL_DMAMUX1_REQ_UART5_TX + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM6_UP + * @arg @ref LL_DMAMUX1_REQ_TIM7_UP + * @arg @ref LL_DMAMUX1_REQ_USART6_RX + * @arg @ref LL_DMAMUX1_REQ_USART6_TX + * @arg @ref LL_DMAMUX1_REQ_I2C3_RX + * @arg @ref LL_DMAMUX1_REQ_I2C3_TX + * @arg @ref LL_DMAMUX1_REQ_DCMI_PSSI (*) + * @arg @ref LL_DMAMUX1_REQ_CRYP_IN + * @arg @ref LL_DMAMUX1_REQ_CRYP_OUT + * @arg @ref LL_DMAMUX1_REQ_HASH_IN + * @arg @ref LL_DMAMUX1_REQ_UART7_RX + * @arg @ref LL_DMAMUX1_REQ_UART7_TX + * @arg @ref LL_DMAMUX1_REQ_UART8_RX + * @arg @ref LL_DMAMUX1_REQ_UART8_TX + * @arg @ref LL_DMAMUX1_REQ_SPI4_RX + * @arg @ref LL_DMAMUX1_REQ_SPI4_TX + * @arg @ref LL_DMAMUX1_REQ_SPI5_RX + * @arg @ref LL_DMAMUX1_REQ_SPI5_TX + * @arg @ref LL_DMAMUX1_REQ_SAI1_A + * @arg @ref LL_DMAMUX1_REQ_SAI1_B + * @arg @ref LL_DMAMUX1_REQ_SAI2_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI2_B (*) + * @arg @ref LL_DMAMUX1_REQ_SWPMI_RX + * @arg @ref LL_DMAMUX1_REQ_SWPMI_TX + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_DT + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_CS + * @arg @ref LL_DMAMUX1_REQ_HRTIM_MASTER (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_A (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_B (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_C (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_D (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_E (*) + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX1_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM15_UP + * @arg @ref LL_DMAMUX1_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM15_COM + * @arg @ref LL_DMAMUX1_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM16_UP + * @arg @ref LL_DMAMUX1_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM17_UP + * @arg @ref LL_DMAMUX1_REQ_SAI3_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI3_B (*) + * @arg @ref LL_DMAMUX1_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_RX (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_TX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_RX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_TX (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_WRITE (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_WRITE(*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_RX (*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_TX (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_TRIG (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_TRIG (*) + * + * @note (*) Availability depends on devices. + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMAMUX_Channel_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_Channel0 + (DMAMUX_CCR_SIZE * (Stream)) + (uint32_t)(DMAMUX_CCR_SIZE * LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(DMAx)))))->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set Memory burst transfer configuration. + * @rmtoll CR MBURST LL_DMA_SetMemoryBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Mburst This parameter can be one of the following values: + * @arg @ref LL_DMA_MBURST_SINGLE + * @arg @ref LL_DMA_MBURST_INC4 + * @arg @ref LL_DMA_MBURST_INC8 + * @arg @ref LL_DMA_MBURST_INC16 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mburst) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MBURST, Mburst); +} + +/** + * @brief Get Memory burst transfer configuration. + * @rmtoll CR MBURST LL_DMA_GetMemoryBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MBURST_SINGLE + * @arg @ref LL_DMA_MBURST_INC4 + * @arg @ref LL_DMA_MBURST_INC8 + * @arg @ref LL_DMA_MBURST_INC16 + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MBURST)); +} + +/** + * @brief Set Peripheral burst transfer configuration. + * @rmtoll CR PBURST LL_DMA_SetPeriphBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Pburst This parameter can be one of the following values: + * @arg @ref LL_DMA_PBURST_SINGLE + * @arg @ref LL_DMA_PBURST_INC4 + * @arg @ref LL_DMA_PBURST_INC8 + * @arg @ref LL_DMA_PBURST_INC16 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Pburst) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PBURST, Pburst); +} + +/** + * @brief Get Peripheral burst transfer configuration. + * @rmtoll CR PBURST LL_DMA_GetPeriphBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PBURST_SINGLE + * @arg @ref LL_DMA_PBURST_INC4 + * @arg @ref LL_DMA_PBURST_INC8 + * @arg @ref LL_DMA_PBURST_INC16 + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PBURST)); +} + +/** + * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. + * @rmtoll CR CT LL_DMA_SetCurrentTargetMem + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param CurrentMemory This parameter can be one of the following values: + * @arg @ref LL_DMA_CURRENTTARGETMEM0 + * @arg @ref LL_DMA_CURRENTTARGETMEM1 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t CurrentMemory) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_CT, CurrentMemory); +} + +/** + * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. + * @rmtoll CR CT LL_DMA_GetCurrentTargetMem + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_CURRENTTARGETMEM0 + * @arg @ref LL_DMA_CURRENTTARGETMEM1 + */ +__STATIC_INLINE uint32_t LL_DMA_GetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_CT)); +} + +/** + * @brief Enable the double buffer mode. + * @rmtoll CR DBM LL_DMA_EnableDoubleBufferMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DBM); +} + +/** + * @brief Disable the double buffer mode. + * @rmtoll CR DBM LL_DMA_DisableDoubleBufferMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DBM); +} + +/** + * @brief Check if double buffer mode is enabled or not. + * @rmtoll CR DBM LL_DMA_IsEnabledDoubleBufferMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + register uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DBM) == (DMA_SxCR_DBM)) ? 1UL : 0UL); +} + +/** + * @brief Get FIFO status. + * @rmtoll FCR FS LL_DMA_GetFIFOStatus + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_FIFOSTATUS_0_25 + * @arg @ref LL_DMA_FIFOSTATUS_25_50 + * @arg @ref LL_DMA_FIFOSTATUS_50_75 + * @arg @ref LL_DMA_FIFOSTATUS_75_100 + * @arg @ref LL_DMA_FIFOSTATUS_EMPTY + * @arg @ref LL_DMA_FIFOSTATUS_FULL + */ +__STATIC_INLINE uint32_t LL_DMA_GetFIFOStatus(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FS)); +} + +/** + * @brief Disable Fifo mode. + * @rmtoll FCR DMDIS LL_DMA_DisableFifoMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_DMDIS); +} + +/** + * @brief Enable Fifo mode. + * @rmtoll FCR DMDIS LL_DMA_EnableFifoMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_DMDIS); +} + +/** + * @brief Select FIFO threshold. + * @rmtoll FCR FTH LL_DMA_SetFIFOThreshold + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Threshold) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FTH, Threshold); +} + +/** + * @brief Get FIFO threshold. + * @rmtoll FCR FTH LL_DMA_GetFIFOThreshold + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + */ +__STATIC_INLINE uint32_t LL_DMA_GetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FTH)); +} + +/** + * @brief Configure the FIFO . + * @rmtoll FCR FTH LL_DMA_ConfigFifo\n + * FCR DMDIS LL_DMA_ConfigFifo + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param FifoMode This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOMODE_ENABLE + * @arg @ref LL_DMA_FIFOMODE_DISABLE + * @param FifoThreshold This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigFifo(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t FifoMode, uint32_t FifoThreshold) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FTH | DMA_SxFCR_DMDIS, FifoMode | FifoThreshold); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA stream is enabled. + * @rmtoll M0AR M0A LL_DMA_ConfigAddresses\n + * PAR PA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param SrcAddress Between 0 to 0xFFFFFFFF + * @param DstAddress Between 0 to 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR, SrcAddress); + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR, SrcAddress); + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @rmtoll M0AR M0A LL_DMA_SetMemoryAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @rmtoll PAR PA LL_DMA_SetPeriphAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param PeriphAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t PeriphAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR, PeriphAddress); +} + +/** + * @brief Get the Memory address. + * @rmtoll M0AR M0A LL_DMA_GetMemoryAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR)); +} + +/** + * @brief Get the Peripheral address. + * @rmtoll PAR PA LL_DMA_GetPeriphAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @rmtoll PAR PA LL_DMA_SetM2MSrcAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @rmtoll M0AR M0A LL_DMA_SetM2MDstAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @rmtoll PAR PA LL_DMA_GetM2MSrcAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @rmtoll M0AR M0A LL_DMA_GetM2MDstAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR)); +} + +/** + * @brief Set Memory 1 address (used in case of Double buffer mode). + * @rmtoll M1AR M1A LL_DMA_SetMemory1Address + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Address Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Address) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M1AR, DMA_SxM1AR_M1A, Address); +} + +/** + * @brief Get Memory 1 address (used in case of Double buffer mode). + * @rmtoll M1AR M1A LL_DMA_GetMemory1Address + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M1AR); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Stream 0 half transfer flag. + * @rmtoll LISR HTIF0 LL_DMA_IsActiveFlag_HT0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_HTIF0) == (DMA_LISR_HTIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 half transfer flag. + * @rmtoll LISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_HTIF1) == (DMA_LISR_HTIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 half transfer flag. + * @rmtoll LISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_HTIF2) == (DMA_LISR_HTIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 half transfer flag. + * @rmtoll LISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_HTIF3) == (DMA_LISR_HTIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 half transfer flag. + * @rmtoll HISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_HTIF4) == (DMA_HISR_HTIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 half transfer flag. + * @rmtoll HISR HTIF0 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_HTIF5) == (DMA_HISR_HTIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 half transfer flag. + * @rmtoll HISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_HTIF6) == (DMA_HISR_HTIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 half transfer flag. + * @rmtoll HISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_HTIF7) == (DMA_HISR_HTIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 0 transfer complete flag. + * @rmtoll LISR TCIF0 LL_DMA_IsActiveFlag_TC0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TCIF0) == (DMA_LISR_TCIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 transfer complete flag. + * @rmtoll LISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TCIF1) == (DMA_LISR_TCIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 transfer complete flag. + * @rmtoll LISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TCIF2) == (DMA_LISR_TCIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 transfer complete flag. + * @rmtoll LISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TCIF3) == (DMA_LISR_TCIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 transfer complete flag. + * @rmtoll HISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TCIF4) == (DMA_HISR_TCIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 transfer complete flag. + * @rmtoll HISR TCIF0 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TCIF5) == (DMA_HISR_TCIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 transfer complete flag. + * @rmtoll HISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TCIF6) == (DMA_HISR_TCIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 transfer complete flag. + * @rmtoll HISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TCIF7) == (DMA_HISR_TCIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 0 transfer error flag. + * @rmtoll LISR TEIF0 LL_DMA_IsActiveFlag_TE0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TEIF0) == (DMA_LISR_TEIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 transfer error flag. + * @rmtoll LISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TEIF1) == (DMA_LISR_TEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 transfer error flag. + * @rmtoll LISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TEIF2) == (DMA_LISR_TEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 transfer error flag. + * @rmtoll LISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TEIF3) == (DMA_LISR_TEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 transfer error flag. + * @rmtoll HISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TEIF4) == (DMA_HISR_TEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 transfer error flag. + * @rmtoll HISR TEIF0 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TEIF5) == (DMA_HISR_TEIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 transfer error flag. + * @rmtoll HISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TEIF6) == (DMA_HISR_TEIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 transfer error flag. + * @rmtoll HISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TEIF7) == (DMA_HISR_TEIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 0 direct mode error flag. + * @rmtoll LISR DMEIF0 LL_DMA_IsActiveFlag_DME0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_DMEIF0) == (DMA_LISR_DMEIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 direct mode error flag. + * @rmtoll LISR DMEIF1 LL_DMA_IsActiveFlag_DME1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_DMEIF1) == (DMA_LISR_DMEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 direct mode error flag. + * @rmtoll LISR DMEIF2 LL_DMA_IsActiveFlag_DME2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_DMEIF2) == (DMA_LISR_DMEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 direct mode error flag. + * @rmtoll LISR DMEIF3 LL_DMA_IsActiveFlag_DME3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_DMEIF3) == (DMA_LISR_DMEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 direct mode error flag. + * @rmtoll HISR DMEIF4 LL_DMA_IsActiveFlag_DME4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_DMEIF4) == (DMA_HISR_DMEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 direct mode error flag. + * @rmtoll HISR DMEIF0 LL_DMA_IsActiveFlag_DME5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_DMEIF5) == (DMA_HISR_DMEIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 direct mode error flag. + * @rmtoll HISR DMEIF6 LL_DMA_IsActiveFlag_DME6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_DMEIF6) == (DMA_HISR_DMEIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 direct mode error flag. + * @rmtoll HISR DMEIF7 LL_DMA_IsActiveFlag_DME7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_DMEIF7) == (DMA_HISR_DMEIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 0 FIFO error flag. + * @rmtoll LISR FEIF0 LL_DMA_IsActiveFlag_FE0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_FEIF0) == (DMA_LISR_FEIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 FIFO error flag. + * @rmtoll LISR FEIF1 LL_DMA_IsActiveFlag_FE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_FEIF1) == (DMA_LISR_FEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 FIFO error flag. + * @rmtoll LISR FEIF2 LL_DMA_IsActiveFlag_FE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_FEIF2) == (DMA_LISR_FEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 FIFO error flag. + * @rmtoll LISR FEIF3 LL_DMA_IsActiveFlag_FE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_FEIF3) == (DMA_LISR_FEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 FIFO error flag. + * @rmtoll HISR FEIF4 LL_DMA_IsActiveFlag_FE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_FEIF4) == (DMA_HISR_FEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 FIFO error flag. + * @rmtoll HISR FEIF0 LL_DMA_IsActiveFlag_FE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_FEIF5) == (DMA_HISR_FEIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 FIFO error flag. + * @rmtoll HISR FEIF6 LL_DMA_IsActiveFlag_FE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_FEIF6) == (DMA_HISR_FEIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 FIFO error flag. + * @rmtoll HISR FEIF7 LL_DMA_IsActiveFlag_FE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_FEIF7) == (DMA_HISR_FEIF7)) ? 1UL : 0UL); +} + +/** + * @brief Clear Stream 0 half transfer flag. + * @rmtoll LIFCR CHTIF0 LL_DMA_ClearFlag_HT0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CHTIF0); +} + +/** + * @brief Clear Stream 1 half transfer flag. + * @rmtoll LIFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CHTIF1); +} + +/** + * @brief Clear Stream 2 half transfer flag. + * @rmtoll LIFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CHTIF2); +} + +/** + * @brief Clear Stream 3 half transfer flag. + * @rmtoll LIFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CHTIF3); +} + +/** + * @brief Clear Stream 4 half transfer flag. + * @rmtoll HIFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CHTIF4); +} + +/** + * @brief Clear Stream 5 half transfer flag. + * @rmtoll HIFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CHTIF5); +} + +/** + * @brief Clear Stream 6 half transfer flag. + * @rmtoll HIFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CHTIF6); +} + +/** + * @brief Clear Stream 7 half transfer flag. + * @rmtoll HIFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CHTIF7); +} + +/** + * @brief Clear Stream 0 transfer complete flag. + * @rmtoll LIFCR CTCIF0 LL_DMA_ClearFlag_TC0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTCIF0); +} + +/** + * @brief Clear Stream 1 transfer complete flag. + * @rmtoll LIFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTCIF1); +} + +/** + * @brief Clear Stream 2 transfer complete flag. + * @rmtoll LIFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTCIF2); +} + +/** + * @brief Clear Stream 3 transfer complete flag. + * @rmtoll LIFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTCIF3); +} + +/** + * @brief Clear Stream 4 transfer complete flag. + * @rmtoll HIFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTCIF4); +} + +/** + * @brief Clear Stream 5 transfer complete flag. + * @rmtoll HIFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTCIF5); +} + +/** + * @brief Clear Stream 6 transfer complete flag. + * @rmtoll HIFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTCIF6); +} + +/** + * @brief Clear Stream 7 transfer complete flag. + * @rmtoll HIFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTCIF7); +} + +/** + * @brief Clear Stream 0 transfer error flag. + * @rmtoll LIFCR CTEIF0 LL_DMA_ClearFlag_TE0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTEIF0); +} + +/** + * @brief Clear Stream 1 transfer error flag. + * @rmtoll LIFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTEIF1); +} + +/** + * @brief Clear Stream 2 transfer error flag. + * @rmtoll LIFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTEIF2); +} + +/** + * @brief Clear Stream 3 transfer error flag. + * @rmtoll LIFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTEIF3); +} + +/** + * @brief Clear Stream 4 transfer error flag. + * @rmtoll HIFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTEIF4); +} + +/** + * @brief Clear Stream 5 transfer error flag. + * @rmtoll HIFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTEIF5); +} + +/** + * @brief Clear Stream 6 transfer error flag. + * @rmtoll HIFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTEIF6); +} + +/** + * @brief Clear Stream 7 transfer error flag. + * @rmtoll HIFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTEIF7); +} + +/** + * @brief Clear Stream 0 direct mode error flag. + * @rmtoll LIFCR CDMEIF0 LL_DMA_ClearFlag_DME0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CDMEIF0); +} + +/** + * @brief Clear Stream 1 direct mode error flag. + * @rmtoll LIFCR CDMEIF1 LL_DMA_ClearFlag_DME1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CDMEIF1); +} + +/** + * @brief Clear Stream 2 direct mode error flag. + * @rmtoll LIFCR CDMEIF2 LL_DMA_ClearFlag_DME2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CDMEIF2); +} + +/** + * @brief Clear Stream 3 direct mode error flag. + * @rmtoll LIFCR CDMEIF3 LL_DMA_ClearFlag_DME3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CDMEIF3); +} + +/** + * @brief Clear Stream 4 direct mode error flag. + * @rmtoll HIFCR CDMEIF4 LL_DMA_ClearFlag_DME4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CDMEIF4); +} + +/** + * @brief Clear Stream 5 direct mode error flag. + * @rmtoll HIFCR CDMEIF5 LL_DMA_ClearFlag_DME5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CDMEIF5); +} + +/** + * @brief Clear Stream 6 direct mode error flag. + * @rmtoll HIFCR CDMEIF6 LL_DMA_ClearFlag_DME6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CDMEIF6); +} + +/** + * @brief Clear Stream 7 direct mode error flag. + * @rmtoll HIFCR CDMEIF7 LL_DMA_ClearFlag_DME7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CDMEIF7); +} + +/** + * @brief Clear Stream 0 FIFO error flag. + * @rmtoll LIFCR CFEIF0 LL_DMA_ClearFlag_FE0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CFEIF0); +} + +/** + * @brief Clear Stream 1 FIFO error flag. + * @rmtoll LIFCR CFEIF1 LL_DMA_ClearFlag_FE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CFEIF1); +} + +/** + * @brief Clear Stream 2 FIFO error flag. + * @rmtoll LIFCR CFEIF2 LL_DMA_ClearFlag_FE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CFEIF2); +} + +/** + * @brief Clear Stream 3 FIFO error flag. + * @rmtoll LIFCR CFEIF3 LL_DMA_ClearFlag_FE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CFEIF3); +} + +/** + * @brief Clear Stream 4 FIFO error flag. + * @rmtoll HIFCR CFEIF4 LL_DMA_ClearFlag_FE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CFEIF4); +} + +/** + * @brief Clear Stream 5 FIFO error flag. + * @rmtoll HIFCR CFEIF5 LL_DMA_ClearFlag_FE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CFEIF5); +} + +/** + * @brief Clear Stream 6 FIFO error flag. + * @rmtoll HIFCR CFEIF6 LL_DMA_ClearFlag_FE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CFEIF6); +} + +/** + * @brief Clear Stream 7 FIFO error flag. + * @rmtoll HIFCR CFEIF7 LL_DMA_ClearFlag_FE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CFEIF7); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TEIE); +} + +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TCIE); +} + +/** + * @brief Enable Direct mode error interrupt. + * @rmtoll CR DMEIE LL_DMA_EnableIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DMEIE); +} + +/** + * @brief Enable FIFO error interrupt. + * @rmtoll FCR FEIE LL_DMA_EnableIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FEIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TCIE); +} + +/** + * @brief Disable Direct mode error interrupt. + * @rmtoll CR DMEIE LL_DMA_DisableIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DMEIE); +} + +/** + * @brief Disable FIFO error interrupt. + * @rmtoll FCR FEIE LL_DMA_DisableIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FEIE); +} + +/** + * @brief Check if Half transfer interrupt is enabled. + * @rmtoll CR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_HTIE) == DMA_SxCR_HTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer error nterrup is enabled. + * @rmtoll CR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TEIE) == DMA_SxCR_TEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer complete interrupt is enabled. + * @rmtoll CR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TCIE) == DMA_SxCR_TCIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Direct mode error interrupt is enabled. + * @rmtoll CR DMEIE LL_DMA_IsEnabledIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DMEIE) == DMA_SxCR_DMEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if FIFO error interrupt is enabled. + * @rmtoll FCR FEIE LL_DMA_IsEnabledIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FEIE) == DMA_SxFCR_FEIE) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct); +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_DMA_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h new file mode 100644 index 0000000..bf4cffa --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h @@ -0,0 +1,2436 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_dmamux.h + * @author MCD Application Team + * @brief Header file of DMAMUX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_DMAMUX_H +#define STM32H7xx_LL_DMAMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (DMAMUX1) || defined (DMAMUX2) + +/** @defgroup DMAMUX_LL DMAMUX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Private_Constants DMAMUX Private Constants + * @{ + */ +/* Define used to get DMAMUX CCR register size */ +#define DMAMUX_CCR_SIZE 0x00000004U + +/* Define used to get DMAMUX RGCR register size */ +#define DMAMUX_RGCR_SIZE 0x00000004U + +/* Define used to get DMAMUX RequestGenerator offset */ +#define DMAMUX_REQ_GEN_OFFSET (DMAMUX1_RequestGenerator0_BASE - DMAMUX1_BASE) +/* Define used to get DMAMUX Channel Status offset */ +#define DMAMUX_CH_STATUS_OFFSET (DMAMUX1_ChannelStatus_BASE - DMAMUX1_BASE) +/* Define used to get DMAMUX RequestGenerator status offset */ +#define DMAMUX_REQ_GEN_STATUS_OFFSET (DMAMUX1_RequestGenStatus_BASE - DMAMUX1_BASE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Constants DMAMUX Exported Constants + * @{ + */ +/** @defgroup DMAMUX_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_WriteReg function + * @{ + */ +#define LL_DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#define LL_DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#define LL_DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#define LL_DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#define LL_DMAMUX_CFR_CSOF12 DMAMUX_CFR_CSOF12 /*!< Synchronization Event Overrun Flag Channel 12 */ +#define LL_DMAMUX_CFR_CSOF13 DMAMUX_CFR_CSOF13 /*!< Synchronization Event Overrun Flag Channel 13 */ +#define LL_DMAMUX_CFR_CSOF14 DMAMUX_CFR_CSOF14 /*!< Synchronization Event Overrun Flag Channel 14 */ +#define LL_DMAMUX_CFR_CSOF15 DMAMUX_CFR_CSOF15 /*!< Synchronization Event Overrun Flag Channel 15 */ +#define LL_DMAMUX_RGCFR_RGCOF0 DMAMUX_RGCFR_COF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF1 DMAMUX_RGCFR_COF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF2 DMAMUX_RGCFR_COF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF3 DMAMUX_RGCFR_COF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF4 DMAMUX_RGCFR_COF4 /*!< Request Generator 4 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF5 DMAMUX_RGCFR_COF5 /*!< Request Generator 5 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF6 DMAMUX_RGCFR_COF6 /*!< Request Generator 6 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF7 DMAMUX_RGCFR_COF7 /*!< Request Generator 7 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_ReadReg function + * @{ + */ +#define LL_DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#define LL_DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#define LL_DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#define LL_DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#define LL_DMAMUX_CSR_SOF12 DMAMUX_CSR_SOF12 /*!< Synchronization Event Overrun Flag Channel 12 */ +#define LL_DMAMUX_CSR_SOF13 DMAMUX_CSR_SOF13 /*!< Synchronization Event Overrun Flag Channel 13 */ +#define LL_DMAMUX_CSR_SOF14 DMAMUX_CSR_SOF14 /*!< Synchronization Event Overrun Flag Channel 14 */ +#define LL_DMAMUX_CSR_SOF15 DMAMUX_CSR_SOF15 /*!< Synchronization Event Overrun Flag Channel 15 */ +#define LL_DMAMUX_RGSR_RGOF0 DMAMUX_RGSR_OF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF1 DMAMUX_RGSR_OF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF2 DMAMUX_RGSR_OF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF3 DMAMUX_RGSR_OF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF4 DMAMUX_RGSR_OF4 /*!< Request Generator 4 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF5 DMAMUX_RGSR_OF5 /*!< Request Generator 5 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF6 DMAMUX_RGSR_OF6 /*!< Request Generator 6 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF7 DMAMUX_RGSR_OF7 /*!< Request Generator 7 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMAMUX_WriteReg functions + * @{ + */ +#define LL_DMAMUX_CCR_SOIE DMAMUX_CxCR_SOIE /*!< Synchronization Event Overrun Interrupt */ +#define LL_DMAMUX_RGCR_RGOIE DMAMUX_RGxCR_OIE /*!< Request Generation Trigger Event Overrun Interrupt */ +/** + * @} + */ + +/** @defgroup DMAMUX1_Request_selection DMAMUX1 Request selection + * @brief DMAMUX1 Request selection + * @{ + */ +/* DMAMUX1 requests */ +#define LL_DMAMUX1_REQ_MEM2MEM 0U /*!< memory to memory transfer */ +#define LL_DMAMUX1_REQ_GENERATOR0 1U /*!< DMAMUX1 request generator 0 */ +#define LL_DMAMUX1_REQ_GENERATOR1 2U /*!< DMAMUX1 request generator 1 */ +#define LL_DMAMUX1_REQ_GENERATOR2 3U /*!< DMAMUX1 request generator 2 */ +#define LL_DMAMUX1_REQ_GENERATOR3 4U /*!< DMAMUX1 request generator 3 */ +#define LL_DMAMUX1_REQ_GENERATOR4 5U /*!< DMAMUX1 request generator 4 */ +#define LL_DMAMUX1_REQ_GENERATOR5 6U /*!< DMAMUX1 request generator 5 */ +#define LL_DMAMUX1_REQ_GENERATOR6 7U /*!< DMAMUX1 request generator 6 */ +#define LL_DMAMUX1_REQ_GENERATOR7 8U /*!< DMAMUX1 request generator 7 */ +#define LL_DMAMUX1_REQ_ADC1 9U /*!< DMAMUX1 ADC1 request */ +#define LL_DMAMUX1_REQ_ADC2 10U /*!< DMAMUX1 ADC2 request */ +#define LL_DMAMUX1_REQ_TIM1_CH1 11U /*!< DMAMUX1 TIM1 CH1 request */ +#define LL_DMAMUX1_REQ_TIM1_CH2 12U /*!< DMAMUX1 TIM1 CH2 request */ +#define LL_DMAMUX1_REQ_TIM1_CH3 13U /*!< DMAMUX1 TIM1 CH3 request */ +#define LL_DMAMUX1_REQ_TIM1_CH4 14U /*!< DMAMUX1 TIM1 CH4 request */ +#define LL_DMAMUX1_REQ_TIM1_UP 15U /*!< DMAMUX1 TIM1 UP request */ +#define LL_DMAMUX1_REQ_TIM1_TRIG 16U /*!< DMAMUX1 TIM1 TRIG request */ +#define LL_DMAMUX1_REQ_TIM1_COM 17U /*!< DMAMUX1 TIM1 COM request */ +#define LL_DMAMUX1_REQ_TIM2_CH1 18U /*!< DMAMUX1 TIM2 CH1 request */ +#define LL_DMAMUX1_REQ_TIM2_CH2 19U /*!< DMAMUX1 TIM2 CH2 request */ +#define LL_DMAMUX1_REQ_TIM2_CH3 20U /*!< DMAMUX1 TIM2 CH3 request */ +#define LL_DMAMUX1_REQ_TIM2_CH4 21U /*!< DMAMUX1 TIM2 CH4 request */ +#define LL_DMAMUX1_REQ_TIM2_UP 22U /*!< DMAMUX1 TIM2 UP request */ +#define LL_DMAMUX1_REQ_TIM3_CH1 23U /*!< DMAMUX1 TIM3 CH1 request */ +#define LL_DMAMUX1_REQ_TIM3_CH2 24U /*!< DMAMUX1 TIM3 CH2 request */ +#define LL_DMAMUX1_REQ_TIM3_CH3 25U /*!< DMAMUX1 TIM3 CH3 request */ +#define LL_DMAMUX1_REQ_TIM3_CH4 26U /*!< DMAMUX1 TIM3 CH4 request */ +#define LL_DMAMUX1_REQ_TIM3_UP 27U /*!< DMAMUX1 TIM3 UP request */ +#define LL_DMAMUX1_REQ_TIM3_TRIG 28U /*!< DMAMUX1 TIM3 TRIG request */ +#define LL_DMAMUX1_REQ_TIM4_CH1 29U /*!< DMAMUX1 TIM4 CH1 request */ +#define LL_DMAMUX1_REQ_TIM4_CH2 30U /*!< DMAMUX1 TIM4 CH2 request */ +#define LL_DMAMUX1_REQ_TIM4_CH3 31U /*!< DMAMUX1 TIM4 CH3 request */ +#define LL_DMAMUX1_REQ_TIM4_UP 32U /*!< DMAMUX1 TIM4 UP request */ +#define LL_DMAMUX1_REQ_I2C1_RX 33U /*!< DMAMUX1 I2C1 RX request */ +#define LL_DMAMUX1_REQ_I2C1_TX 34U /*!< DMAMUX1 I2C1 TX request */ +#define LL_DMAMUX1_REQ_I2C2_RX 35U /*!< DMAMUX1 I2C2 RX request */ +#define LL_DMAMUX1_REQ_I2C2_TX 36U /*!< DMAMUX1 I2C2 TX request */ +#define LL_DMAMUX1_REQ_SPI1_RX 37U /*!< DMAMUX1 SPI1 RX request */ +#define LL_DMAMUX1_REQ_SPI1_TX 38U /*!< DMAMUX1 SPI1 TX request */ +#define LL_DMAMUX1_REQ_SPI2_RX 39U /*!< DMAMUX1 SPI2 RX request */ +#define LL_DMAMUX1_REQ_SPI2_TX 40U /*!< DMAMUX1 SPI2 TX request */ +#define LL_DMAMUX1_REQ_USART1_RX 41U /*!< DMAMUX1 USART1 RX request */ +#define LL_DMAMUX1_REQ_USART1_TX 42U /*!< DMAMUX1 USART1 TX request */ +#define LL_DMAMUX1_REQ_USART2_RX 43U /*!< DMAMUX1 USART2 RX request */ +#define LL_DMAMUX1_REQ_USART2_TX 44U /*!< DMAMUX1 USART2 TX request */ +#define LL_DMAMUX1_REQ_USART3_RX 45U /*!< DMAMUX1 USART3 RX request */ +#define LL_DMAMUX1_REQ_USART3_TX 46U /*!< DMAMUX1 USART3 TX request */ +#define LL_DMAMUX1_REQ_TIM8_CH1 47U /*!< DMAMUX1 TIM8 CH1 request */ +#define LL_DMAMUX1_REQ_TIM8_CH2 48U /*!< DMAMUX1 TIM8 CH2 request */ +#define LL_DMAMUX1_REQ_TIM8_CH3 49U /*!< DMAMUX1 TIM8 CH3 request */ +#define LL_DMAMUX1_REQ_TIM8_CH4 50U /*!< DMAMUX1 TIM8 CH4 request */ +#define LL_DMAMUX1_REQ_TIM8_UP 51U /*!< DMAMUX1 TIM8 UP request */ +#define LL_DMAMUX1_REQ_TIM8_TRIG 52U /*!< DMAMUX1 TIM8 TRIG request */ +#define LL_DMAMUX1_REQ_TIM8_COM 53U /*!< DMAMUX1 TIM8 COM request */ +#define LL_DMAMUX1_REQ_TIM5_CH1 55U /*!< DMAMUX1 TIM5 CH1 request */ +#define LL_DMAMUX1_REQ_TIM5_CH2 56U /*!< DMAMUX1 TIM5 CH2 request */ +#define LL_DMAMUX1_REQ_TIM5_CH3 57U /*!< DMAMUX1 TIM5 CH3 request */ +#define LL_DMAMUX1_REQ_TIM5_CH4 58U /*!< DMAMUX1 TIM5 CH4 request */ +#define LL_DMAMUX1_REQ_TIM5_UP 59U /*!< DMAMUX1 TIM5 UP request */ +#define LL_DMAMUX1_REQ_TIM5_TRIG 60U /*!< DMAMUX1 TIM5 TRIG request */ +#define LL_DMAMUX1_REQ_SPI3_RX 61U /*!< DMAMUX1 SPI3 RX request */ +#define LL_DMAMUX1_REQ_SPI3_TX 62U /*!< DMAMUX1 SPI3 TX request */ +#define LL_DMAMUX1_REQ_UART4_RX 63U /*!< DMAMUX1 UART4 RX request */ +#define LL_DMAMUX1_REQ_UART4_TX 64U /*!< DMAMUX1 UART4 TX request */ +#define LL_DMAMUX1_REQ_UART5_RX 65U /*!< DMAMUX1 UART5 RX request */ +#define LL_DMAMUX1_REQ_UART5_TX 66U /*!< DMAMUX1 UART5 TX request */ +#define LL_DMAMUX1_REQ_DAC1_CH1 67U /*!< DMAMUX1 DAC1 Channel 1 request */ +#define LL_DMAMUX1_REQ_DAC1_CH2 68U /*!< DMAMUX1 DAC1 Channel 2 request */ +#define LL_DMAMUX1_REQ_TIM6_UP 69U /*!< DMAMUX1 TIM6 UP request */ +#define LL_DMAMUX1_REQ_TIM7_UP 70U /*!< DMAMUX1 TIM7 UP request */ +#define LL_DMAMUX1_REQ_USART6_RX 71U /*!< DMAMUX1 USART6 RX request */ +#define LL_DMAMUX1_REQ_USART6_TX 72U /*!< DMAMUX1 USART6 TX request */ +#define LL_DMAMUX1_REQ_I2C3_RX 73U /*!< DMAMUX1 I2C3 RX request */ +#define LL_DMAMUX1_REQ_I2C3_TX 74U /*!< DMAMUX1 I2C3 TX request */ +#if defined (PSSI) +#define LL_DMAMUX1_REQ_DCMI_PSSI 75U /*!< DMAMUX1 DCMI/PSSI request */ +#define LL_DMAMUX1_REQ_DCMI LL_DMAMUX1_REQ_DCMI_PSSI /* Legacy define */ +#else +#define LL_DMAMUX1_REQ_DCMI 75U /*!< DMAMUX1 DCMI request */ +#endif /* PSSI */ +#define LL_DMAMUX1_REQ_CRYP_IN 76U /*!< DMAMUX1 CRYP IN request */ +#define LL_DMAMUX1_REQ_CRYP_OUT 77U /*!< DMAMUX1 CRYP OUT request */ +#define LL_DMAMUX1_REQ_HASH_IN 78U /*!< DMAMUX1 HASH IN request */ +#define LL_DMAMUX1_REQ_UART7_RX 79U /*!< DMAMUX1 UART7 RX request */ +#define LL_DMAMUX1_REQ_UART7_TX 80U /*!< DMAMUX1 UART7 TX request */ +#define LL_DMAMUX1_REQ_UART8_RX 81U /*!< DMAMUX1 UART8 RX request */ +#define LL_DMAMUX1_REQ_UART8_TX 82U /*!< DMAMUX1 UART8 TX request */ +#define LL_DMAMUX1_REQ_SPI4_RX 83U /*!< DMAMUX1 SPI4 RX request */ +#define LL_DMAMUX1_REQ_SPI4_TX 84U /*!< DMAMUX1 SPI4 TX request */ +#define LL_DMAMUX1_REQ_SPI5_RX 85U /*!< DMAMUX1 SPI5 RX request */ +#define LL_DMAMUX1_REQ_SPI5_TX 86U /*!< DMAMUX1 SPI5 TX request */ +#define LL_DMAMUX1_REQ_SAI1_A 87U /*!< DMAMUX1 SAI1 A request */ +#define LL_DMAMUX1_REQ_SAI1_B 88U /*!< DMAMUX1 SAI1 B request */ +#if defined(SAI2) +#define LL_DMAMUX1_REQ_SAI2_A 89U /*!< DMAMUX1 SAI2 A request */ +#define LL_DMAMUX1_REQ_SAI2_B 90U /*!< DMAMUX1 SAI2 B request */ +#endif /* SAI2 */ +#define LL_DMAMUX1_REQ_SWPMI_RX 91U /*!< DMAMUX1 SWPMI RX request */ +#define LL_DMAMUX1_REQ_SWPMI_TX 92U /*!< DMAMUX1 SWPMI TX request */ +#define LL_DMAMUX1_REQ_SPDIF_RX_DT 93U /*!< DMAMUX1 SPDIF RXDT request */ +#define LL_DMAMUX1_REQ_SPDIF_RX_CS 94U /*!< DMAMUX1 SPDIF RXCS request */ +#if defined (HRTIM1) +#define LL_DMAMUX1_REQ_HRTIM_MASTER 95U /*!< DMAMUX1 HRTIM1 Master request 1 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_A 96U /*!< DMAMUX1 HRTIM1 Timer A request 2 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_B 97U /*!< DMAMUX1 HRTIM1 Timer B request 3 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_C 98U /*!< DMAMUX1 HRTIM1 Timer C request 4 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_D 99U /*!< DMAMUX1 HRTIM1 Timer D request 5 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_E 100U /*!< DMAMUX1 HRTIM1 Timer E request 6 */ +#endif /* HRTIM1 */ +#define LL_DMAMUX1_REQ_DFSDM1_FLT0 101U /*!< DMAMUX1 DFSDM1 Filter0 request */ +#define LL_DMAMUX1_REQ_DFSDM1_FLT1 102U /*!< DMAMUX1 DFSDM1 Filter1 request */ +#define LL_DMAMUX1_REQ_DFSDM1_FLT2 103U /*!< DMAMUX1 DFSDM1 Filter2 request */ +#define LL_DMAMUX1_REQ_DFSDM1_FLT3 104U /*!< DMAMUX1 DFSDM1 Filter3 request */ +#define LL_DMAMUX1_REQ_TIM15_CH1 105U /*!< DMAMUX1 TIM15 CH1 request */ +#define LL_DMAMUX1_REQ_TIM15_UP 106U /*!< DMAMUX1 TIM15 UP request */ +#define LL_DMAMUX1_REQ_TIM15_TRIG 107U /*!< DMAMUX1 TIM15 TRIG request */ +#define LL_DMAMUX1_REQ_TIM15_COM 108U /*!< DMAMUX1 TIM15 COM request */ +#define LL_DMAMUX1_REQ_TIM16_CH1 109U /*!< DMAMUX1 TIM16 CH1 request */ +#define LL_DMAMUX1_REQ_TIM16_UP 110U /*!< DMAMUX1 TIM16 UP request */ +#define LL_DMAMUX1_REQ_TIM17_CH1 111U /*!< DMAMUX1 TIM17 CH1 request */ +#define LL_DMAMUX1_REQ_TIM17_UP 112U /*!< DMAMUX1 TIM17 UP request */ +#if defined (SAI3) +#define LL_DMAMUX1_REQ_SAI3_A 113U /*!< DMAMUX1 SAI3 A request */ +#define LL_DMAMUX1_REQ_SAI3_B 114U /*!< DMAMUX1 SAI3 B request */ +#endif /* SAI3 */ +#if defined (ADC3) +#define LL_DMAMUX1_REQ_ADC3 115U /*!< DMAMUX1 ADC3 request */ +#endif /* ADC3 */ +#if defined (UART9) +#define LL_DMAMUX1_REQ_UART9_RX 116U /*!< DMAMUX1 UART9 RX request */ +#define LL_DMAMUX1_REQ_UART9_TX 117U /*!< DMAMUX1 UART9 TX request */ +#endif /* UART9 */ +#if defined (USART10) +#define LL_DMAMUX1_REQ_USART10_RX 118U /*!< DMAMUX1 USART10 RX request */ +#define LL_DMAMUX1_REQ_USART10_TX 119U /*!< DMAMUX1 USART10 TX request */ +#endif /* USART10 */ +#if defined(FMAC) +#define LL_DMAMUX1_REQ_FMAC_READ 120U /*!< DMAMUX1 FMAC Read request */ +#define LL_DMAMUX1_REQ_FMAC_WRITE 121U /*!< DMAMUX1 FMAC Write request */ +#endif /* FMAC */ +#if defined(CORDIC) +#define LL_DMAMUX1_REQ_CORDIC_READ 122U /*!< DMAMUX1 CORDIC Read request */ +#define LL_DMAMUX1_REQ_CORDIC_WRITE 123U /*!< DMAMUX1 CORDIC Write request */ +#endif /* CORDIC */ +#if defined(I2C5) +#define LL_DMAMUX1_REQ_I2C5_RX 124U /*!< DMAMUX1 I2C5 RX request */ +#define LL_DMAMUX1_REQ_I2C5_TX 125U /*!< DMAMUX1 I2C5 TX request */ +#endif /* I2C5 */ +#if defined(TIM23) +#define LL_DMAMUX1_REQ_TIM23_CH1 126U /*!< DMAMUX1 TIM23 CH1 request */ +#define LL_DMAMUX1_REQ_TIM23_CH2 127U /*!< DMAMUX1 TIM23 CH2 request */ +#define LL_DMAMUX1_REQ_TIM23_CH3 128U /*!< DMAMUX1 TIM23 CH3 request */ +#define LL_DMAMUX1_REQ_TIM23_CH4 129U /*!< DMAMUX1 TIM23 CH4 request */ +#define LL_DMAMUX1_REQ_TIM23_UP 130U /*!< DMAMUX1 TIM23 UP request */ +#define LL_DMAMUX1_REQ_TIM23_TRIG 131U /*!< DMAMUX1 TIM23 TRIG request */ +#endif /* TIM23 */ +#if defined(TIM24) +#define LL_DMAMUX1_REQ_TIM24_CH1 132U /*!< DMAMUX1 TIM24 CH1 request */ +#define LL_DMAMUX1_REQ_TIM24_CH2 133U /*!< DMAMUX1 TIM24 CH2 request */ +#define LL_DMAMUX1_REQ_TIM24_CH3 134U /*!< DMAMUX1 TIM24 CH3 request */ +#define LL_DMAMUX1_REQ_TIM24_CH4 135U /*!< DMAMUX1 TIM24 CH4 request */ +#define LL_DMAMUX1_REQ_TIM24_UP 136U /*!< DMAMUX1 TIM24 UP request */ +#define LL_DMAMUX1_REQ_TIM24_TRIG 137U /*!< DMAMUX1 TIM24 TRIG request */ +#endif /* TIM24 */ +/** + * @} + */ + +/** @defgroup DMAMUX2_Request_selection DMAMUX2 Request selection + * @brief DMAMUX2 Request selection + * @{ + */ +/* DMAMUX2 requests */ +#define LL_DMAMUX2_REQ_MEM2MEM 0U /*!< memory to memory transfer */ +#define LL_DMAMUX2_REQ_GENERATOR0 1U /*!< DMAMUX2 request generator 0 */ +#define LL_DMAMUX2_REQ_GENERATOR1 2U /*!< DMAMUX2 request generator 1 */ +#define LL_DMAMUX2_REQ_GENERATOR2 3U /*!< DMAMUX2 request generator 2 */ +#define LL_DMAMUX2_REQ_GENERATOR3 4U /*!< DMAMUX2 request generator 3 */ +#define LL_DMAMUX2_REQ_GENERATOR4 5U /*!< DMAMUX2 request generator 4 */ +#define LL_DMAMUX2_REQ_GENERATOR5 6U /*!< DMAMUX2 request generator 5 */ +#define LL_DMAMUX2_REQ_GENERATOR6 7U /*!< DMAMUX2 request generator 6 */ +#define LL_DMAMUX2_REQ_GENERATOR7 8U /*!< DMAMUX2 request generator 7 */ +#define LL_DMAMUX2_REQ_LPUART1_RX 9U /*!< DMAMUX2 LP_UART1_RX request */ +#define LL_DMAMUX2_REQ_LPUART1_TX 10U /*!< DMAMUX2 LP_UART1_TX request */ +#define LL_DMAMUX2_REQ_SPI6_RX 11U /*!< DMAMUX2 SPI6 RX request */ +#define LL_DMAMUX2_REQ_SPI6_TX 12U /*!< DMAMUX2 SPI6 TX request */ +#define LL_DMAMUX2_REQ_I2C4_RX 13U /*!< DMAMUX2 I2C4 RX request */ +#define LL_DMAMUX2_REQ_I2C4_TX 14U /*!< DMAMUX2 I2C4 TX request */ +#if defined (SAI4) +#define LL_DMAMUX2_REQ_SAI4_A 15U /*!< DMAMUX2 SAI4 A request */ +#define LL_DMAMUX2_REQ_SAI4_B 16U /*!< DMAMUX2 SAI4 B request */ +#endif /* SAI4 */ +#if defined (ADC3) +#define LL_DMAMUX2_REQ_ADC3 17U /*!< DMAMUX2 ADC3 request */ +#endif /* ADC3 */ +#if defined (DAC2) +#define LL_DMAMUX2_REQ_DAC2_CH1 17U /*!< DMAMUX2 DAC2 CH1 request */ +#endif /* DAC2 */ +#if defined (DFSDM2_Channel0) +#define LL_DMAMUX2_REQ_DFSDM2_FLT0 18U /*!< DMAMUX2 DFSDM2 Filter0 request */ +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ + + +/** @defgroup DMAMUX_LL_EC_CHANNEL DMAMUX Channel + * @{ + */ +#define LL_DMAMUX_CHANNEL_0 0x00000000U /*!< DMAMUX1 Channel 0 connected to DMA1 Channel 0 , DMAMUX2 Channel 0 connected to BDMA Channel 0 */ +#define LL_DMAMUX_CHANNEL_1 0x00000001U /*!< DMAMUX1 Channel 1 connected to DMA1 Channel 1 , DMAMUX2 Channel 1 connected to BDMA Channel 1 */ +#define LL_DMAMUX_CHANNEL_2 0x00000002U /*!< DMAMUX1 Channel 2 connected to DMA1 Channel 2 , DMAMUX2 Channel 2 connected to BDMA Channel 2 */ +#define LL_DMAMUX_CHANNEL_3 0x00000003U /*!< DMAMUX1 Channel 3 connected to DMA1 Channel 3 , DMAMUX2 Channel 3 connected to BDMA Channel 3 */ +#define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX1 Channel 4 connected to DMA1 Channel 4 , DMAMUX2 Channel 4 connected to BDMA Channel 4 */ +#define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX1 Channel 5 connected to DMA1 Channel 5 , DMAMUX2 Channel 5 connected to BDMA Channel 5 */ +#define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX1 Channel 6 connected to DMA1 Channel 6 , DMAMUX2 Channel 6 connected to BDMA Channel 6 */ +#define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX1 Channel 7 connected to DMA1 Channel 7 , DMAMUX2 Channel 7 connected to BDMA Channel 7 */ +#define LL_DMAMUX_CHANNEL_8 0x00000008U /*!< DMAMUX1 Channel 8 connected to DMA2 Channel 0 */ +#define LL_DMAMUX_CHANNEL_9 0x00000009U /*!< DMAMUX1 Channel 9 connected to DMA2 Channel 1 */ +#define LL_DMAMUX_CHANNEL_10 0x0000000AU /*!< DMAMUX1 Channel 10 connected to DMA2 Channel 2 */ +#define LL_DMAMUX_CHANNEL_11 0x0000000BU /*!< DMAMUX1 Channel 11 connected to DMA2 Channel 3 */ +#define LL_DMAMUX_CHANNEL_12 0x0000000CU /*!< DMAMUX1 Channel 12 connected to DMA2 Channel 4 */ +#define LL_DMAMUX_CHANNEL_13 0x0000000DU /*!< DMAMUX1 Channel 13 connected to DMA2 Channel 5 */ +#define LL_DMAMUX_CHANNEL_14 0x0000000EU /*!< DMAMUX1 Channel 14 connected to DMA2 Channel 6 */ +#define LL_DMAMUX_CHANNEL_15 0x0000000FU /*!< DMAMUX1 Channel 15 connected to DMA2 Channel 7 */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_NO Synchronization Signal Polarity + * @{ + */ +#define LL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< All requests are blocked */ +#define LL_DMAMUX_SYNC_POL_RISING DMAMUX_CxCR_SPOL_0 /*!< Synchronization on event on rising edge */ +#define LL_DMAMUX_SYNC_POL_FALLING DMAMUX_CxCR_SPOL_1 /*!< Synchronization on event on falling edge */ +#define LL_DMAMUX_SYNC_POL_RISING_FALLING (DMAMUX_CxCR_SPOL_0 | DMAMUX_CxCR_SPOL_1) /*!< Synchronization on event on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_EVT Synchronization Signal Event + * @{ + */ +#define LL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 0x00000000U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel0 Event */ +#define LL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 0x01000000U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel1 Event */ +#define LL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 0x02000000U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel2 Event */ +#define LL_DMAMUX1_SYNC_LPTIM1_OUT 0x03000000U /*!< DMAMUX1 synchronization Signal is LPTIM1 OUT */ +#define LL_DMAMUX1_SYNC_LPTIM2_OUT 0x04000000U /*!< DMAMUX1 synchronization Signal is LPTIM2 OUT */ +#define LL_DMAMUX1_SYNC_LPTIM3_OUT 0x05000000U /*!< DMAMUX1 synchronization Signal is LPTIM3 OUT */ +#define LL_DMAMUX1_SYNC_EXTI0 0x06000000U /*!< DMAMUX1 synchronization Signal is EXTI0 IT */ +#define LL_DMAMUX1_SYNC_TIM12_TRGO 0x07000000U /*!< DMAMUX1 synchronization Signal is TIM12 TRGO */ + +#define LL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT 0x00000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel0 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT 0x01000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel1 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT 0x02000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel2 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT 0x03000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel3 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT 0x04000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel4 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT 0x05000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel5 Event */ +#define LL_DMAMUX2_SYNC_LPUART1_RX_WKUP 0x06000000U /*!< DMAMUX2 synchronization Signal is LPUART1 RX Wakeup */ +#define LL_DMAMUX2_SYNC_LPUART1_TX_WKUP 0x07000000U /*!< DMAMUX2 synchronization Signal is LPUART1 TX Wakeup */ +#define LL_DMAMUX2_SYNC_LPTIM2_OUT 0x08000000U /*!< DMAMUX2 synchronization Signal is LPTIM2 output */ +#define LL_DMAMUX2_SYNC_LPTIM3_OUT 0x09000000U /*!< DMAMUX2 synchronization Signal is LPTIM3 output */ +#define LL_DMAMUX2_SYNC_I2C4_WKUP 0x0A000000U /*!< DMAMUX2 synchronization Signal is I2C4 Wakeup */ +#define LL_DMAMUX2_SYNC_SPI6_WKUP 0x0B000000U /*!< DMAMUX2 synchronization Signal is SPI6 Wakeup */ +#define LL_DMAMUX2_SYNC_COMP1_OUT 0x0C000000U /*!< DMAMUX2 synchronization Signal is Comparator 1 output */ +#define LL_DMAMUX2_SYNC_RTC_WKUP 0x0D000000U /*!< DMAMUX2 synchronization Signal is RTC Wakeup */ +#define LL_DMAMUX2_SYNC_EXTI0 0x0E000000U /*!< DMAMUX2 synchronization Signal is EXTI0 IT */ +#define LL_DMAMUX2_SYNC_EXTI2 0x0F000000U /*!< DMAMUX2 synchronization Signal is EXTI2 IT */ + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GENERATOR Request Generator Channel + * @{ + */ +#define LL_DMAMUX_REQ_GEN_0 0x00000000U +#define LL_DMAMUX_REQ_GEN_1 0x00000001U +#define LL_DMAMUX_REQ_GEN_2 0x00000002U +#define LL_DMAMUX_REQ_GEN_3 0x00000003U +#define LL_DMAMUX_REQ_GEN_4 0x00000004U +#define LL_DMAMUX_REQ_GEN_5 0x00000005U +#define LL_DMAMUX_REQ_GEN_6 0x00000006U +#define LL_DMAMUX_REQ_GEN_7 0x00000007U +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN_POLARITY External Request Signal Generation Polarity + * @{ + */ +#define LL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< No external DMA request generation */ +#define LL_DMAMUX_REQ_GEN_POL_RISING DMAMUX_RGxCR_GPOL_0 /*!< External DMA request generation on event on rising edge */ +#define LL_DMAMUX_REQ_GEN_POL_FALLING DMAMUX_RGxCR_GPOL_1 /*!< External DMA request generation on event on falling edge */ +#define LL_DMAMUX_REQ_GEN_POL_RISING_FALLING (DMAMUX_RGxCR_GPOL_0 | DMAMUX_RGxCR_GPOL_1) /*!< External DMA request generation on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN External Request Signal Generation + * @{ + */ +#define LL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 0U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel0 Event */ +#define LL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 1U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel1 Event */ +#define LL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 2U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel2 Event */ +#define LL_DMAMUX1_REQ_GEN_LPTIM1_OUT 3U /*!< DMAMUX1 Request generator Signal is LPTIM1 OUT */ +#define LL_DMAMUX1_REQ_GEN_LPTIM2_OUT 4U /*!< DMAMUX1 Request generator Signal is LPTIM2 OUT */ +#define LL_DMAMUX1_REQ_GEN_LPTIM3_OUT 5U /*!< DMAMUX1 Request generator Signal is LPTIM3 OUT */ +#define LL_DMAMUX1_REQ_GEN_EXTI0 6U /*!< DMAMUX1 Request generator Signal is EXTI0 IT */ +#define LL_DMAMUX1_REQ_GEN_TIM12_TRGO 7U /*!< DMAMUX1 Request generator Signal is TIM12 TRGO */ + +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT 0U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel0 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT 1U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel1 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT 2U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel2 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT 3U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel3 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT 4U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel4 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT 5U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel5 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT 6U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel6 Event */ +#define LL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP 7U /*!< DMAMUX2 Request generator Signal is LPUART1 RX Wakeup */ +#define LL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP 8U /*!< DMAMUX2 Request generator Signal is LPUART1 TX Wakeup */ +#define LL_DMAMUX2_REQ_GEN_LPTIM2_WKUP 9U /*!< DMAMUX2 Request generator Signal is LPTIM2 Wakeup */ +#define LL_DMAMUX2_REQ_GEN_LPTIM2_OUT 10U /*!< DMAMUX2 Request generator Signal is LPTIM2 OUT */ +#define LL_DMAMUX2_REQ_GEN_LPTIM3_WKUP 11U /*!< DMAMUX2 Request generator Signal is LPTIM3 Wakeup */ +#define LL_DMAMUX2_REQ_GEN_LPTIM3_OUT 12U /*!< DMAMUX2 Request generator Signal is LPTIM3 OUT */ +#if defined (LPTIM4) +#define LL_DMAMUX2_REQ_GEN_LPTIM4_WKUP 13U /*!< DMAMUX2 Request generator Signal is LPTIM4 Wakeup */ +#endif /* LPTIM4 */ +#if defined (LPTIM5) +#define LL_DMAMUX2_REQ_GEN_LPTIM5_WKUP 14U /*!< DMAMUX2 Request generator Signal is LPTIM5 Wakeup */ +#endif /* LPTIM5 */ +#define LL_DMAMUX2_REQ_GEN_I2C4_WKUP 15U /*!< DMAMUX2 Request generator Signal is I2C4 Wakeup */ +#define LL_DMAMUX2_REQ_GEN_SPI6_WKUP 16U /*!< DMAMUX2 Request generator Signal is SPI6 Wakeup */ +#define LL_DMAMUX2_REQ_GEN_COMP1_OUT 17U /*!< DMAMUX2 Request generator Signal is Comparator 1 output */ +#define LL_DMAMUX2_REQ_GEN_COMP2_OUT 18U /*!< DMAMUX2 Request generator Signal is Comparator 2 output */ +#define LL_DMAMUX2_REQ_GEN_RTC_WKUP 19U /*!< DMAMUX2 Request generator Signal is RTC Wakeup */ +#define LL_DMAMUX2_REQ_GEN_EXTI0 20U /*!< DMAMUX2 Request generator Signal is EXTI0 */ +#define LL_DMAMUX2_REQ_GEN_EXTI2 21U /*!< DMAMUX2 Request generator Signal is EXTI2 */ +#define LL_DMAMUX2_REQ_GEN_I2C4_IT_EVT 22U /*!< DMAMUX2 Request generator Signal is I2C4 IT Event */ +#define LL_DMAMUX2_REQ_GEN_SPI6_IT 23U /*!< DMAMUX2 Request generator Signal is SPI6 IT */ +#define LL_DMAMUX2_REQ_GEN_LPUART1_TX_IT 24U /*!< DMAMUX2 Request generator Signal is LPUART1 Tx IT */ +#define LL_DMAMUX2_REQ_GEN_LPUART1_RX_IT 25U /*!< DMAMUX2 Request generator Signal is LPUART1 Rx IT */ +#if defined (ADC3) +#define LL_DMAMUX2_REQ_GEN_ADC3_IT 26U /*!< DMAMUX2 Request generator Signal is ADC3 IT */ +#define LL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT 27U /*!< DMAMUX2 Request generator Signal is ADC3 Analog Watchdog 1 output */ +#endif /* ADC3 */ +#define LL_DMAMUX2_REQ_GEN_BDMA_CH0_IT 28U /*!< DMAMUX2 Request generator Signal is BDMA Channel 0 IT */ +#define LL_DMAMUX2_REQ_GEN_BDMA_CH1_IT 29U /*!< DMAMUX2 Request generator Signal is BDMA Channel 1 IT */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Macros DMAMUX Exported Macros + * @{ + */ + +/** @defgroup DMAMUX_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMAMUX_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMAMUX_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Functions DMAMUX Exported Functions + * @{ + */ + +/** @defgroup DMAMUX_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX1 channel 0 to 7 are mapped to DMA1 channel 0 to 7. + * DMAMUX1 channel 8 to 15 are mapped to DMA2 channel 0 to 7. + * DMAMUX2 channel 0 to 7 are mapped to BDMA channel 0 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_MEM2MEM + * @arg @ref LL_DMAMUX1_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX1_REQ_ADC1 + * @arg @ref LL_DMAMUX1_REQ_ADC2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM1_UP + * @arg @ref LL_DMAMUX1_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM1_COM + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM2_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM3_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM4_UP + * @arg @ref LL_DMAMUX1_REQ_I2C1_RX + * @arg @ref LL_DMAMUX1_REQ_I2C1_TX + * @arg @ref LL_DMAMUX1_REQ_I2C2_RX + * @arg @ref LL_DMAMUX1_REQ_I2C2_TX + * @arg @ref LL_DMAMUX1_REQ_SPI1_RX + * @arg @ref LL_DMAMUX1_REQ_SPI1_TX + * @arg @ref LL_DMAMUX1_REQ_SPI2_RX + * @arg @ref LL_DMAMUX1_REQ_SPI2_TX + * @arg @ref LL_DMAMUX1_REQ_USART1_RX + * @arg @ref LL_DMAMUX1_REQ_USART1_TX + * @arg @ref LL_DMAMUX1_REQ_USART2_RX + * @arg @ref LL_DMAMUX1_REQ_USART2_TX + * @arg @ref LL_DMAMUX1_REQ_USART3_RX + * @arg @ref LL_DMAMUX1_REQ_USART3_TX + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM8_UP + * @arg @ref LL_DMAMUX1_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM8_COM + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM5_UP + * @arg @ref LL_DMAMUX1_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX1_REQ_SPI3_RX + * @arg @ref LL_DMAMUX1_REQ_SPI3_TX + * @arg @ref LL_DMAMUX1_REQ_UART4_RX + * @arg @ref LL_DMAMUX1_REQ_UART4_TX + * @arg @ref LL_DMAMUX1_REQ_UART5_RX + * @arg @ref LL_DMAMUX1_REQ_UART5_TX + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM6_UP + * @arg @ref LL_DMAMUX1_REQ_TIM7_UP + * @arg @ref LL_DMAMUX1_REQ_USART6_RX + * @arg @ref LL_DMAMUX1_REQ_USART6_TX + * @arg @ref LL_DMAMUX1_REQ_I2C3_RX + * @arg @ref LL_DMAMUX1_REQ_I2C3_TX + * @arg @ref LL_DMAMUX1_REQ_DCMI_PSSI (*) + * @arg @ref LL_DMAMUX1_REQ_CRYP_IN + * @arg @ref LL_DMAMUX1_REQ_CRYP_OUT + * @arg @ref LL_DMAMUX1_REQ_HASH_IN + * @arg @ref LL_DMAMUX1_REQ_UART7_RX + * @arg @ref LL_DMAMUX1_REQ_UART7_TX + * @arg @ref LL_DMAMUX1_REQ_UART8_RX + * @arg @ref LL_DMAMUX1_REQ_UART8_TX + * @arg @ref LL_DMAMUX1_REQ_SPI4_RX + * @arg @ref LL_DMAMUX1_REQ_SPI4_TX + * @arg @ref LL_DMAMUX1_REQ_SPI5_RX + * @arg @ref LL_DMAMUX1_REQ_SPI5_TX + * @arg @ref LL_DMAMUX1_REQ_SAI1_A + * @arg @ref LL_DMAMUX1_REQ_SAI1_B + * @arg @ref LL_DMAMUX1_REQ_SAI2_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI2_B (*) + * @arg @ref LL_DMAMUX1_REQ_SWPMI_RX + * @arg @ref LL_DMAMUX1_REQ_SWPMI_TX + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_DT + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_CS + * @arg @ref LL_DMAMUX1_REQ_HRTIM_MASTER (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_A (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_B (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_C (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_D (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_E (*) + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX1_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM15_UP + * @arg @ref LL_DMAMUX1_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM15_COM + * @arg @ref LL_DMAMUX1_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM16_UP + * @arg @ref LL_DMAMUX1_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM17_UP + * @arg @ref LL_DMAMUX1_REQ_SAI3_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI3_B (*) + * @arg @ref LL_DMAMUX1_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_RX (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_TX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_RX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_TX (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_WRITE (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_WRITE(*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_RX (*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_TX (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_TRIG (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_TRIG (*) + * @arg @ref LL_DMAMUX2_REQ_MEM2MEM + * @arg @ref LL_DMAMUX2_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX2_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX2_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX2_REQ_SPI6_RX + * @arg @ref LL_DMAMUX2_REQ_SPI6_TX + * @arg @ref LL_DMAMUX2_REQ_I2C4_RX + * @arg @ref LL_DMAMUX2_REQ_I2C4_TX + * @arg @ref LL_DMAMUX2_REQ_SAI4_A (*) + * @arg @ref LL_DMAMUX2_REQ_SAI4_B (*) + * @arg @ref LL_DMAMUX2_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX2_REQ_DAC2_CH1 (*) + * @arg @ref LL_DMAMUX2_REQ_DFSDM2_FLT0 (*) + * + * @note (*) Availability depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Request) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX1 channel 0 to 7 are mapped to DMA1 channel 0 to 7. + * DMAMUX1 channel 8 to 15 are mapped to DMA2 channel 0 to 7. + * DMAMUX2 channel 0 to 7 are mapped to BDMA channel 0 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_MEM2MEM + * @arg @ref LL_DMAMUX1_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX1_REQ_ADC1 + * @arg @ref LL_DMAMUX1_REQ_ADC2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM1_UP + * @arg @ref LL_DMAMUX1_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM1_COM + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM2_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM3_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM4_UP + * @arg @ref LL_DMAMUX1_REQ_I2C1_RX + * @arg @ref LL_DMAMUX1_REQ_I2C1_TX + * @arg @ref LL_DMAMUX1_REQ_I2C2_RX + * @arg @ref LL_DMAMUX1_REQ_I2C2_TX + * @arg @ref LL_DMAMUX1_REQ_SPI1_RX + * @arg @ref LL_DMAMUX1_REQ_SPI1_TX + * @arg @ref LL_DMAMUX1_REQ_SPI2_RX + * @arg @ref LL_DMAMUX1_REQ_SPI2_TX + * @arg @ref LL_DMAMUX1_REQ_USART1_RX + * @arg @ref LL_DMAMUX1_REQ_USART1_TX + * @arg @ref LL_DMAMUX1_REQ_USART2_RX + * @arg @ref LL_DMAMUX1_REQ_USART2_TX + * @arg @ref LL_DMAMUX1_REQ_USART3_RX + * @arg @ref LL_DMAMUX1_REQ_USART3_TX + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM8_UP + * @arg @ref LL_DMAMUX1_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM8_COM + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM5_UP + * @arg @ref LL_DMAMUX1_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX1_REQ_SPI3_RX + * @arg @ref LL_DMAMUX1_REQ_SPI3_TX + * @arg @ref LL_DMAMUX1_REQ_UART4_RX + * @arg @ref LL_DMAMUX1_REQ_UART4_TX + * @arg @ref LL_DMAMUX1_REQ_UART5_RX + * @arg @ref LL_DMAMUX1_REQ_UART5_TX + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM6_UP + * @arg @ref LL_DMAMUX1_REQ_TIM7_UP + * @arg @ref LL_DMAMUX1_REQ_USART6_RX + * @arg @ref LL_DMAMUX1_REQ_USART6_TX + * @arg @ref LL_DMAMUX1_REQ_I2C3_RX + * @arg @ref LL_DMAMUX1_REQ_I2C3_TX + * @arg @ref LL_DMAMUX1_REQ_DCMI_PSSI (*) + * @arg @ref LL_DMAMUX1_REQ_CRYP_IN + * @arg @ref LL_DMAMUX1_REQ_CRYP_OUT + * @arg @ref LL_DMAMUX1_REQ_HASH_IN + * @arg @ref LL_DMAMUX1_REQ_UART7_RX + * @arg @ref LL_DMAMUX1_REQ_UART7_TX + * @arg @ref LL_DMAMUX1_REQ_UART8_RX + * @arg @ref LL_DMAMUX1_REQ_UART8_TX + * @arg @ref LL_DMAMUX1_REQ_SPI4_RX + * @arg @ref LL_DMAMUX1_REQ_SPI4_TX + * @arg @ref LL_DMAMUX1_REQ_SPI5_RX + * @arg @ref LL_DMAMUX1_REQ_SPI5_TX + * @arg @ref LL_DMAMUX1_REQ_SAI1_A + * @arg @ref LL_DMAMUX1_REQ_SAI1_B + * @arg @ref LL_DMAMUX1_REQ_SAI2_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI2_B (*) + * @arg @ref LL_DMAMUX1_REQ_SWPMI_RX + * @arg @ref LL_DMAMUX1_REQ_SWPMI_TX + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_DT + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_CS + * @arg @ref LL_DMAMUX1_REQ_HRTIM_MASTER (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_A (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_B (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_C (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_D (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_E (*) + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX1_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM15_UP + * @arg @ref LL_DMAMUX1_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM15_COM + * @arg @ref LL_DMAMUX1_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM16_UP + * @arg @ref LL_DMAMUX1_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM17_UP + * @arg @ref LL_DMAMUX1_REQ_SAI3_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI3_B (*) + * @arg @ref LL_DMAMUX1_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_RX (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_TX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_RX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_TX (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_WRITE (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_WRITE(*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_RX (*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_TX (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_TRIG (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_TRIG (*) + * @arg @ref LL_DMAMUX2_REQ_MEM2MEM + * @arg @ref LL_DMAMUX2_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX2_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX2_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX2_REQ_SPI6_RX + * @arg @ref LL_DMAMUX2_REQ_SPI6_TX + * @arg @ref LL_DMAMUX2_REQ_I2C4_RX + * @arg @ref LL_DMAMUX2_REQ_I2C4_TX + * @arg @ref LL_DMAMUX2_REQ_SAI4_A (*) + * @arg @ref LL_DMAMUX2_REQ_SAI4_B (*) + * @arg @ref LL_DMAMUX2_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX2_REQ_DAC2_CH1 (*) + * @arg @ref LL_DMAMUX2_REQ_DFSDM2_FLT0 (*) + * + * @note (*) Availability depends on devices. + * @retval None + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @rmtoll CxCR NBREQ LL_DMAMUX_SetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t RequestNb) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_NBREQ, (RequestNb - 1U) << DMAMUX_CxCR_NBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @rmtoll CxCR NBREQ LL_DMAMUX_GetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)((READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_NBREQ) >> DMAMUX_CxCR_NBREQ_Pos) + 1U); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is synchronized. + * @rmtoll CxCR SPOL LL_DMAMUX_SetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Polarity) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is synchronized. + * @rmtoll CxCR SPOL LL_DMAMUX_GetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SPOL)); +} + +/** + * @brief Enable the Event Generation on DMAMUX channel x. + * @rmtoll CxCR EGE LL_DMAMUX_EnableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Disable the Event Generation on DMAMUX channel x. + * @rmtoll CxCR EGE LL_DMAMUX_DisableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Check if the Event Generation on DMAMUX channel x is enabled or disabled. + * @rmtoll CxCR EGE LL_DMAMUX_IsEnabledEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the synchronization mode. + * @rmtoll CxCR SE LL_DMAMUX_EnableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Disable the synchronization mode. + * @rmtoll CxCR SE LL_DMAMUX_DisableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Check if the synchronization mode is enabled or disabled. + * @rmtoll CxCR SE LL_DMAMUX_IsEnabledSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE)) ? 1UL : 0UL); +} + +/** + * @brief Set DMAMUX synchronization ID on DMAMUX Channel x. + * @rmtoll CxCR SYNC_ID LL_DMAMUX_SetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @param SyncID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX1_SYNC_EXTI0 + * @arg @ref LL_DMAMUX1_SYNC_TIM12_TRGO + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_RX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_TX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX2_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX2_SYNC_I2C4_WKUP + * @arg @ref LL_DMAMUX2_SYNC_SPI6_WKUP + * @arg @ref LL_DMAMUX2_SYNC_COMP1_OUT + * @arg @ref LL_DMAMUX2_SYNC_RTC_WKUP + * @arg @ref LL_DMAMUX2_SYNC_EXTI0 + * @arg @ref LL_DMAMUX2_SYNC_EXTI2 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t SyncID) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SYNC_ID, SyncID); +} + +/** + * @brief Get DMAMUX synchronization ID on DMAMUX Channel x. + * @rmtoll CxCR SYNC_ID LL_DMAMUX_GetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX1_SYNC_EXTI0 + * @arg @ref LL_DMAMUX1_SYNC_TIM12_TRGO + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_RX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_TX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX2_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX2_SYNC_I2C4_WKUP + * @arg @ref LL_DMAMUX2_SYNC_SPI6_WKUP + * @arg @ref LL_DMAMUX2_SYNC_COMP1_OUT + * @arg @ref LL_DMAMUX2_SYNC_RTC_WKUP + * @arg @ref LL_DMAMUX2_SYNC_EXTI0 + * @arg @ref LL_DMAMUX2_SYNC_EXTI2 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SYNC_ID)); +} + +/** + * @brief Enable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_EnableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * (RequestGenChannel))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Disable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_DisableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * (RequestGenChannel))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Check if the Request Generator is enabled or disabled. + * @rmtoll RGxCR GE LL_DMAMUX_IsEnabledRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE)) ? 1UL : 0UL); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_SetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t Polarity) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_GetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GPOL)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a generation event. + * @note This field can only be written when Generator is disabled. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_SetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestNb) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GNBREQ, (RequestNb - 1U) << DMAMUX_RGxCR_GNBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a generation event. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_GetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)((READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GNBREQ) >> DMAMUX_RGxCR_GNBREQ_Pos) + 1U); +} + +/** + * @brief Set DMAMUX external Request Signal ID on DMAMUX Request Generation Trigger Event Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_SetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @param RequestSignalID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT + * @arg @ref LL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT + * @arg @ref LL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT + * @arg @ref LL_DMAMUX1_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX1_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX1_REQ_GEN_LPTIM3_OUT + * @arg @ref LL_DMAMUX1_REQ_GEN_EXTI0 + * @arg @ref LL_DMAMUX1_REQ_GEN_TIM12_TRGO + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM2_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM3_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM3_OUT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM4_WKUP (*) + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM5_WKUP (*) + * @arg @ref LL_DMAMUX2_REQ_GEN_I2C4_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_SPI6_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_COMP1_OUT + * @arg @ref LL_DMAMUX2_REQ_GEN_COMP2_OUT + * @arg @ref LL_DMAMUX2_REQ_GEN_RTC_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_EXTI0 + * @arg @ref LL_DMAMUX2_REQ_GEN_EXTI2 + * @arg @ref LL_DMAMUX2_REQ_GEN_I2C4_IT_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_SPI6_IT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPUART1_TX_IT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPUART1_RX_IT + * @arg @ref LL_DMAMUX2_REQ_GEN_ADC3_IT (*) + * @arg @ref LL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT (*) + * @arg @ref LL_DMAMUX2_REQ_GEN_BDMA_CH0_IT + * @arg @ref LL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + * @note (*) Availability depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestSignalID) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_SIG_ID, RequestSignalID); +} + +/** + * @brief Get DMAMUX external Request Signal ID set on DMAMUX Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_GetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX1_SYNC_EXTI0 + * @arg @ref LL_DMAMUX1_SYNC_TIM12_TRGO + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_RX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_TX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX2_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX2_SYNC_I2C4_WKUP + * @arg @ref LL_DMAMUX2_SYNC_SPI6_WKUP + * @arg @ref LL_DMAMUX2_SYNC_COMP1_OUT + * @arg @ref LL_DMAMUX2_SYNC_RTC_WKUP + * @arg @ref LL_DMAMUX2_SYNC_EXTI0 + * @arg @ref LL_DMAMUX2_SYNC_EXTI2 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_SIG_ID)); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Synchronization Event Overrun Flag Channel 0. + * @rmtoll CSR SOF0 LL_DMAMUX_IsActiveFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF0) == (DMAMUX_CSR_SOF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 1. + * @rmtoll CSR SOF1 LL_DMAMUX_IsActiveFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF1) == (DMAMUX_CSR_SOF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 2. + * @rmtoll CSR SOF2 LL_DMAMUX_IsActiveFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF2) == (DMAMUX_CSR_SOF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 3. + * @rmtoll CSR SOF3 LL_DMAMUX_IsActiveFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF3) == (DMAMUX_CSR_SOF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 4. + * @rmtoll CSR SOF4 LL_DMAMUX_IsActiveFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF4) == (DMAMUX_CSR_SOF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 5. + * @rmtoll CSR SOF5 LL_DMAMUX_IsActiveFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF5) == (DMAMUX_CSR_SOF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 6. + * @rmtoll CSR SOF6 LL_DMAMUX_IsActiveFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF6) == (DMAMUX_CSR_SOF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 7. + * @rmtoll CSR SOF7 LL_DMAMUX_IsActiveFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF7) == (DMAMUX_CSR_SOF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 8. + * @rmtoll CSR SOF8 LL_DMAMUX_IsActiveFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF8) == (DMAMUX_CSR_SOF8)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 9. + * @rmtoll CSR SOF9 LL_DMAMUX_IsActiveFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF9) == (DMAMUX_CSR_SOF9)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 10. + * @rmtoll CSR SOF10 LL_DMAMUX_IsActiveFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF10) == (DMAMUX_CSR_SOF10)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 11. + * @rmtoll CSR SOF11 LL_DMAMUX_IsActiveFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF11) == (DMAMUX_CSR_SOF11)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 12. + * @rmtoll CSR SOF12 LL_DMAMUX_IsActiveFlag_SO12 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO12(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF12) == (DMAMUX_CSR_SOF12)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 13. + * @rmtoll CSR SOF13 LL_DMAMUX_IsActiveFlag_SO13 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO13(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF13) == (DMAMUX_CSR_SOF13)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 14. + * @rmtoll CSR SOF14 LL_DMAMUX_IsActiveFlag_SO14 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO14(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF14) == (DMAMUX_CSR_SOF14)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 15. + * @rmtoll CSR SOF15 LL_DMAMUX_IsActiveFlag_SO15 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO15(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF15) == (DMAMUX_CSR_SOF15)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGSR OF0 LL_DMAMUX_IsActiveFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF0) == (DMAMUX_RGSR_OF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGSR OF1 LL_DMAMUX_IsActiveFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF1) == (DMAMUX_RGSR_OF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGSR OF2 LL_DMAMUX_IsActiveFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF2) == (DMAMUX_RGSR_OF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGSR OF3 LL_DMAMUX_IsActiveFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF3) == (DMAMUX_RGSR_OF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 4 Trigger Event Overrun Flag. + * @rmtoll RGSR OF4 LL_DMAMUX_IsActiveFlag_RGO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF4) == (DMAMUX_RGSR_OF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 5 Trigger Event Overrun Flag. + * @rmtoll RGSR OF5 LL_DMAMUX_IsActiveFlag_RGO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF5) == (DMAMUX_RGSR_OF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 6 Trigger Event Overrun Flag. + * @rmtoll RGSR OF6 LL_DMAMUX_IsActiveFlag_RGO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF6) == (DMAMUX_RGSR_OF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 7 Trigger Event Overrun Flag. + * @rmtoll RGSR OF7 LL_DMAMUX_IsActiveFlag_RGO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF7) == (DMAMUX_RGSR_OF7)) ? 1UL : 0UL); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 0. + * @rmtoll CFR CSOF0 LL_DMAMUX_ClearFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF0); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 1. + * @rmtoll CFR CSOF1 LL_DMAMUX_ClearFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF1); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 2. + * @rmtoll CFR CSOF2 LL_DMAMUX_ClearFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF2); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 3. + * @rmtoll CFR CSOF3 LL_DMAMUX_ClearFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF3); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 4. + * @rmtoll CFR CSOF4 LL_DMAMUX_ClearFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF4); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 5. + * @rmtoll CFR CSOF5 LL_DMAMUX_ClearFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF5); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 6. + * @rmtoll CFR CSOF6 LL_DMAMUX_ClearFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF6); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 7. + * @rmtoll CFR CSOF7 LL_DMAMUX_ClearFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF7); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 8. + * @rmtoll CFR CSOF8 LL_DMAMUX_ClearFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF8); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 9. + * @rmtoll CFR CSOF9 LL_DMAMUX_ClearFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF9); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 10. + * @rmtoll CFR CSOF10 LL_DMAMUX_ClearFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF10); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 11. + * @rmtoll CFR CSOF11 LL_DMAMUX_ClearFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF11); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 12. + * @rmtoll CFR CSOF12 LL_DMAMUX_ClearFlag_SO12 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO12(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF12); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 13. + * @rmtoll CFR CSOF13 LL_DMAMUX_ClearFlag_SO13 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO13(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF13); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 14. + * @rmtoll CFR CSOF14 LL_DMAMUX_ClearFlag_SO14 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO14(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF14); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 15. + * @rmtoll CFR CSOF15 LL_DMAMUX_ClearFlag_SO15 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO15(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF15); +} + +/** + * @brief Clear Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF0 LL_DMAMUX_ClearFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF0); +} + +/** + * @brief Clear Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF1 LL_DMAMUX_ClearFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF1); +} + +/** + * @brief Clear Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF2 LL_DMAMUX_ClearFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF2); +} + +/** + * @brief Clear Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF3 LL_DMAMUX_ClearFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF3); +} + +/** + * @brief Clear Request Generator 4 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF4 LL_DMAMUX_ClearFlag_RGO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF4); +} + +/** + * @brief Clear Request Generator 5 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF5 LL_DMAMUX_ClearFlag_RGO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF5); +} + +/** + * @brief Clear Request Generator 6 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF6 LL_DMAMUX_ClearFlag_RGO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF6); +} + +/** + * @brief Clear Request Generator 7 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF7 LL_DMAMUX_ClearFlag_RGO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF7); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll CxCR SOIE LL_DMAMUX_EnableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_Channel_TypeDef *)((uint32_t)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel)))))->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Disable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll CxCR SOIE LL_DMAMUX_DisableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_Channel_TypeDef *)((uint32_t)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel)))))->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Check if the Synchronization Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll CxCR SOIE LL_DMAMUX_IsEnabledIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SOIE)); +} + +/** + * @brief Enable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_EnableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Disable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_DisableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Check if the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll RGxCR OIE LL_DMAMUX_IsEnabledIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 || DMAMUX2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_DMAMUX_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h new file mode 100644 index 0000000..885f22d --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h @@ -0,0 +1,3285 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_LL_EXTI_H +#define __STM32H7xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + uint32_t Line_64_95; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 64 to 95 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */ +#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */ +#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */ +#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */ +#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ +#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */ +#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */ +#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */ +#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ +#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */ +#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ +#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */ +#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */ +#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */ +#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */ +#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */ +#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ +#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/ + +#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */ +#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */ +#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */ +#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */ +#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */ +#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */ +#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */ +#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */ +#define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */ +#define LL_EXTI_LINE_41 EXTI_IMR2_IM41 /*!< Extended line 41 */ +#define LL_EXTI_LINE_42 EXTI_IMR2_IM42 /*!< Extended line 42 */ +#define LL_EXTI_LINE_43 EXTI_IMR2_IM43 /*!< Extended line 43 */ +#if defined(USB2_OTG_FS) +#define LL_EXTI_LINE_44 EXTI_IMR2_IM44 /*!< Extended line 44 */ +#endif /* USB2_OTG_FS */ +#if defined(DSI) +#define LL_EXTI_LINE_46 EXTI_IMR2_IM46 /*!< Extended line 46 */ +#endif /* DSI */ +#define LL_EXTI_LINE_47 EXTI_IMR2_IM47 /*!< Extended line 47 */ +#define LL_EXTI_LINE_48 EXTI_IMR2_IM48 /*!< Extended line 48 */ +#define LL_EXTI_LINE_49 EXTI_IMR2_IM49 /*!< Extended line 49 */ +#define LL_EXTI_LINE_50 EXTI_IMR2_IM50 /*!< Extended line 50 */ +#define LL_EXTI_LINE_51 EXTI_IMR2_IM51 /*!< Extended line 51 */ +#define LL_EXTI_LINE_52 EXTI_IMR2_IM52 /*!< Extended line 52 */ +#define LL_EXTI_LINE_53 EXTI_IMR2_IM53 /*!< Extended line 53 */ +#define LL_EXTI_LINE_54 EXTI_IMR2_IM54 /*!< Extended line 54 */ +#define LL_EXTI_LINE_55 EXTI_IMR2_IM55 /*!< Extended line 55 */ +#define LL_EXTI_LINE_56 EXTI_IMR2_IM56 /*!< Extended line 56 */ +#if defined(EXTI_IMR2_IM57) +#define LL_EXTI_LINE_57 EXTI_IMR2_IM57 /*!< Extended line 57 */ +#endif /*EXTI_IMR2_IM57*/ +#define LL_EXTI_LINE_58 EXTI_IMR2_IM58 /*!< Extended line 58 */ +#if defined(EXTI_IMR2_IM59) +#define LL_EXTI_LINE_59 EXTI_IMR2_IM59 /*!< Extended line 59 */ +#endif /*EXTI_IMR2_IM59*/ +#define LL_EXTI_LINE_60 EXTI_IMR2_IM60 /*!< Extended line 60 */ +#define LL_EXTI_LINE_61 EXTI_IMR2_IM61 /*!< Extended line 61 */ +#define LL_EXTI_LINE_62 EXTI_IMR2_IM62 /*!< Extended line 62 */ +#define LL_EXTI_LINE_63 EXTI_IMR2_IM63 /*!< Extended line 63 */ +#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/ + +#define LL_EXTI_LINE_64 EXTI_IMR3_IM64 /*!< Extended line 64 */ +#define LL_EXTI_LINE_65 EXTI_IMR3_IM65 /*!< Extended line 65 */ +#define LL_EXTI_LINE_66 EXTI_IMR3_IM66 /*!< Extended line 66 */ +#define LL_EXTI_LINE_67 EXTI_IMR3_IM67 /*!< Extended line 67 */ +#define LL_EXTI_LINE_68 EXTI_IMR3_IM68 /*!< Extended line 68 */ +#define LL_EXTI_LINE_69 EXTI_IMR3_IM69 /*!< Extended line 69 */ +#define LL_EXTI_LINE_70 EXTI_IMR3_IM70 /*!< Extended line 70 */ +#define LL_EXTI_LINE_71 EXTI_IMR3_IM71 /*!< Extended line 71 */ +#define LL_EXTI_LINE_72 EXTI_IMR3_IM72 /*!< Extended line 72 */ +#define LL_EXTI_LINE_73 EXTI_IMR3_IM73 /*!< Extended line 73 */ +#define LL_EXTI_LINE_74 EXTI_IMR3_IM74 /*!< Extended line 74 */ +#if defined(ADC3) +#define LL_EXTI_LINE_75 EXTI_IMR3_IM75 /*!< Extended line 75 */ +#endif /* ADC3 */ +#if defined(SAI4) +#define LL_EXTI_LINE_76 EXTI_IMR3_IM76 /*!< Extended line 76 */ +#endif /* SAI4 */ +#if defined(DUAL_CORE) +#define LL_EXTI_LINE_77 EXTI_IMR3_IM77 /*!< Extended line 77 */ +#define LL_EXTI_LINE_78 EXTI_IMR3_IM78 /*!< Extended line 78 */ +#define LL_EXTI_LINE_79 EXTI_IMR3_IM79 /*!< Extended line 79 */ +#define LL_EXTI_LINE_80 EXTI_IMR3_IM80 /*!< Extended line 80 */ +#define LL_EXTI_LINE_82 EXTI_IMR3_IM82 /*!< Extended line 82 */ +#define LL_EXTI_LINE_84 EXTI_IMR3_IM84 /*!< Extended line 84 */ +#endif /* DUAL_CORE */ +#define LL_EXTI_LINE_85 EXTI_IMR3_IM85 /*!< Extended line 85 */ +#if defined(ETH) +#define LL_EXTI_LINE_86 EXTI_IMR3_IM86 /*!< Extended line 86 */ +#endif /* ETH */ +#define LL_EXTI_LINE_87 EXTI_IMR3_IM87 /*!< Extended line 87 */ +#if defined(DTS) +#define LL_EXTI_LINE_88 EXTI_IMR3_IM88 /*!< Extended line 88 */ +#endif /* DTS */ +#if defined(EXTI_IMR3_IM89) +#define LL_EXTI_LINE_89 EXTI_IMR3_IM89 /*!< Extended line 89 */ +#endif /* EXTI_IMR3_IM89 */ +#if defined(EXTI_IMR3_IM90) +#define LL_EXTI_LINE_90 EXTI_IMR3_IM90 /*!< Extended line 90 */ +#endif /* EXTI_IMR3_IM90 */ +#if defined(I2C5) +#define LL_EXTI_LINE_91 EXTI_IMR3_IM91 /*!< Extended line 91 */ +#endif /* I2C5 */ +#define LL_EXTI_LINE_ALL_64_95 EXTI_IMR3_IM /*!< All Extended line not reserved*/ + + +#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x01U) /*!< Cortex-M7 Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x02U) /*!< Cortex-M7 Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x03U) /*!< Cortex-M7 Interrupt & Event Mode */ + +#if defined(DUAL_CORE) +#define LL_EXTI_MODE_C1_IT LL_EXTI_MODE_IT /*!< Cortex-M7 Interrupt Mode */ +#define LL_EXTI_MODE_C1_EVENT LL_EXTI_MODE_EVENT /*!< Cortex-M7 Event Mode */ +#define LL_EXTI_MODE_C1_IT_EVENT LL_EXTI_MODE_IT_EVENT /*!< Cortex-M7 Interrupt & Event Mode */ + +#define LL_EXTI_MODE_C2_IT ((uint8_t)0x10U) /*!< Cortex-M4 Interrupt Mode */ +#define LL_EXTI_MODE_C2_EVENT ((uint8_t)0x20U) /*!< Cortex-M4 Event Mode */ +#define LL_EXTI_MODE_C2_IT_EVENT ((uint8_t)0x30U) /*!< Cortex-M4 Interrupt & Event Mode */ +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_D3_PEND_CLR D3 Pend Clear Source + * @{ + */ +#define LL_EXTI_D3_PEND_CLR_DMACH6 ((uint8_t)0x00U) /*!< DMA ch6 event selected as D3 domain pendclear source */ +#define LL_EXTI_D3_PEND_CLR_DMACH7 ((uint8_t)0x01U) /*!< DMA ch7 event selected as D3 domain pendclear source */ +#if defined (LPTIM4) +#define LL_EXTI_D3_PEND_CLR_LPTIM4 ((uint8_t)0x02U) /*!< LPTIM4 out selected as D3 domain pendclear source */ +#else +#define LL_EXTI_D3_PEND_CLR_LPTIM2 ((uint8_t)0x02U) /*!< LPTIM2 out selected as D3 domain pendclear source */ +#endif /*LPTIM4*/ +#if defined (LPTIM5) +#define LL_EXTI_D3_PEND_CLR_LPTIM5 ((uint8_t)0x03U) /*!< LPTIM5 out selected as D3 domain pendclear source */ +#else +#define LL_EXTI_D3_PEND_CLR_LPTIM3 ((uint8_t)0x02U) /*!< LPTIM3 out selected as D3 domain pendclear source */ +#endif /*LPTIM5*/ +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) + +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 + * @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR2, ExtiLine); +} + + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 64 to 95 + * @rmtoll IMR3 IMx LL_EXTI_EnableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR3, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR1, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 + * @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 64 to 95 + * @rmtoll IMR3 IMx LL_EXTI_DisableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR3, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 + * @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 64 to 95 + * @rmtoll IMR3 IMx LL_EXTI_IsEnabledIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 for cpu2 + * @rmtoll C2IMR1 IMx LL_C2_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2IMR1, ExtiLine); +} + + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 for cpu2 + * @rmtoll C2IMR2 IMx LL_C2_EXTI_EnableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableIT_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2IMR2, ExtiLine); +} + + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 64 to 95 + * @rmtoll C2IMR3 IMx LL_C2_EXTI_EnableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableIT_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2IMR3, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 for cpu2 + * @rmtoll C2IMR1 IMx LL_C2_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2IMR1, ExtiLine); +} + + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 for cpu2 + * @rmtoll C2IMR2 IMx LL_C2_EXTI_DisableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableIT_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2IMR2, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 64 to 95 for cpu2 + * @rmtoll C2IMR3 IMx LL_C2_EXTI_DisableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableIT_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2IMR3, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 for cpu2 + * @rmtoll C2IMR1 IMx LL_C2_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2IMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 for cpu2 + * @rmtoll C2IMR2 IMx LL_C2_EXTI_IsEnabledIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2IMR2, ExtiLine) == (ExtiLine))? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 64 to 95 + * @rmtoll C2IMR3 IMx LL_C2_EXTI_IsEnabledIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2IMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +#endif /* DUAL_CORE */ + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_EnableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR3, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_DisableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR3, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_IsEnabledEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +#if defined(DUAL_CORE) + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 for cpu2 + * @rmtoll C2EMR1 EMx LL_C2_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2EMR1, ExtiLine); +} + + +/** + * @brief Enable ExtiLine Event request for Lines in range 32 to 63 for cpu2 + * @rmtoll C2EMR2 EMx LL_C2_EXTI_EnableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableEvent_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2EMR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 64 to 95 for cpu2 + * @rmtoll C2EMR3 EMx LL_C2_EXTI_EnableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableEvent_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2EMR3, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 for cpu2 + * @rmtoll C2EMR1 EMx LL_C2_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2EMR1, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 32 to 63 for cpu2 + * @rmtoll C2EMR2 EMx LL_C2_EXTI_DisableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableEvent_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2EMR2, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 64 to 95 for cpu2 + * @rmtoll C2EMR3 EMx LL_C2_EXTI_DisableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableEvent_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2EMR3, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 for cpu2 + * @rmtoll C2EMR1 EMx LL_C2_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2EMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 for cpu2 + * @rmtoll C2EMR2 EMx LL_C2_EXTI_IsEnabledEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2EMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 64 to 95 for cpu2 + * @rmtoll C2EMR3 EMx LL_C2_EXTI_IsEnabledEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2EMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR1, ExtiLine); + +} + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set.Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 64 to 95 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set.Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR3 RTx LL_EXTI_EnableRisingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR3, ExtiLine); +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR1, ExtiLine); + +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 64 to 95 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR3 RTx LL_EXTI_DisableRisingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR3, ExtiLine); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 64 to 95 + * @rmtoll RTSR3 RTx LL_EXTI_IsEnabledRisingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 64 to 95 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR3 FTx LL_EXTI_EnableFallingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR3, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 64 to 95 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR3 FTx LL_EXTI_DisableFallingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR3, ExtiLine); +} + + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 64 to 95 + * @rmtoll FTSR3 FTx LL_EXTI_IsEnabledFallingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_C1IMR1, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR1 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR1 + * register (by writing a 1 into the bit) + * @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER1, ExtiLine); +} + +/** + * @brief Generate a software Interrupt Event for Lines in range 32 to 63 + * @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR2 + * register (by writing a 1 into the bit) + * @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER2, ExtiLine); +} + +/** + * @brief Generate a software Interrupt Event for Lines in range 64 to 95 + * @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR3 + * register (by writing a 1 into the bit) + * @rmtoll SWIER3 SWIx LL_EXTI_GenerateSWI_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER3, ExtiLine); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 64 to 95 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR3 PIFx LL_EXTI_IsActiveFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR1, ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR2, ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 64 to 95 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR3 PIFx LL_EXTI_ReadFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_64_95(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR3, ExtiLine)); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR1, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR2, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 64 to 95 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR3 PIFx LL_EXTI_ClearFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_64_95(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR3, ExtiLine); +} + +#if defined(DUAL_CORE) + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR1 PIFx LL_C2_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2PR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR2 PIFx LL_C2_EXTI_IsActiveFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2PR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 64 to 95 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR3 PIFx LL_C2_EXTI_IsActiveFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2PR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR1 PIFx LL_C2_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->C2PR1, ExtiLine)); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range 32 to 63 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR2 PIFx LL_C2_EXTI_ReadFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_32_63(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->C2PR2, ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 64 to 95 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR3 PIFx LL_C2_EXTI_ReadFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_64_95(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->C2PR3, ExtiLine)); +} +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR1 PIFx LL_C2_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->C2PR1, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 32 to 63 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR2 PIFx LL_C2_EXTI_ClearFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_ClearFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->C2PR2, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 64 to 95 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR3 PIFx LL_C2_EXTI_ClearFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_ClearFlag_64_95(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->C2PR3, ExtiLine); +} + +#endif /* DUAL_CORE */ + +/** + * @brief Enable ExtiLine D3 Pending Mask for Lines in range 0 to 31 + * @rmtoll D3PMR1 MRx LL_D3_EXTI_EnablePendMask_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_EnablePendMask_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->D3PMR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine D3 Pending Mask for Lines in range 32 to 63 + * @rmtoll D3PMR2 MRx LL_D3_EXTI_EnablePendMask_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_EnablePendMask_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->D3PMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine D3 Pending Mask for Lines in range 0 to 31 + * @rmtoll D3PMR1 MRx LL_D3_EXTI_DisablePendMask_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_DisablePendMask_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->D3PMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine D3 Pending Mask for Lines in range 32 to 63 + * @rmtoll D3PMR2 MRx LL_D3_EXTI_DisablePendMask_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_DisablePendMask_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->D3PMR2, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine D3 Pending Mask is enabled for Lines in range 0 to 31 + * @rmtoll D3PMR1 MRx LL_D3_EXTI_IsEnabledPendMask_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_IsEnabledPendMask_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->D3PMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Indicate if ExtiLine D3 Pending Mask is enabled for Lines in range 32 to 63 + * @rmtoll D3PMR2 MRx LL_D3_EXTI_IsEnabledPendMask_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_IsEnabledPendMask_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->D3PMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 0 to 15 + * @rmtoll D3PCR1L PCSx LL_D3_EXTI_SetPendClearSel_0_15 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @param ClrSrc This parameter can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_0_15(uint32_t ExtiLine, uint32_t ClrSrc) +{ + MODIFY_REG(EXTI->D3PCR1L, ((ExtiLine * ExtiLine) * 3UL), ((ExtiLine * ExtiLine) * ClrSrc)); +} + +/** + * @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 16 to 31 + * @rmtoll D3PCR1H PCSx LL_D3_EXTI_SetPendClearSel_16_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @param ClrSrc This parameter can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_16_31(uint32_t ExtiLine, uint32_t ClrSrc) +{ + MODIFY_REG(EXTI->D3PCR1H, (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * 3UL), (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * ClrSrc)); +} + + +/** + * @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 32 to 47 + * @rmtoll D3PCR2L PCSx LL_D3_EXTI_SetPendClearSel_32_47 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @param ClrSrc This parameter can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_32_47(uint32_t ExtiLine, uint32_t ClrSrc) +{ + MODIFY_REG(EXTI->D3PCR2L, ((ExtiLine * ExtiLine) * 3UL), ((ExtiLine * ExtiLine) * ClrSrc)); +} + +/** + * @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 48 to 63 + * @rmtoll D3PCR2H PCSx LL_D3_EXTI_SetPendClearSel_48_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @param ClrSrc This parameter can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_48_63(uint32_t ExtiLine, uint32_t ClrSrc) +{ + MODIFY_REG(EXTI->D3PCR2H, (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * 3UL), (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * ClrSrc)); +} + +/** + * @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 0 to 15 + * @rmtoll D3PCR1L PCSx LL_D3_EXTI_GetPendClearSel_0_15 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_0_15(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->D3PCR1L, ((ExtiLine * ExtiLine) * 3UL)) / (ExtiLine * ExtiLine)); +} + +/** + * @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 16 to 31 + * @rmtoll D3PCR1H PCSx LL_D3_EXTI_GetPendClearSel_16_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @retval Returned value can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_16_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->D3PCR1H, (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * 3UL)) / ((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos))); +} + +/** + * @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 32 to 47 + * @rmtoll D3PCR2L PCSx LL_D3_EXTI_GetPendClearSel_32_47 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @retval Returned value can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_32_47(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->D3PCR2L, ((ExtiLine * ExtiLine) * 3UL)) / (ExtiLine * ExtiLine)); +} + +/** + * @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 48 to 63 + * @rmtoll D3PCR2H PCSx LL_D3_EXTI_GetPendClearSel_48_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @retval Returned value can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_48_63(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->D3PCR2H, (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * 3UL)) / ((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos))); +} + + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{, + */ + +ErrorStatus LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +ErrorStatus LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_EXTI_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_fmc.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_fmc.h new file mode 100644 index 0000000..3d34898 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_fmc.h @@ -0,0 +1,1162 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_fmc.h + * @author MCD Application Team + * @brief Header file of FMC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_FMC_H +#define STM32H7xx_LL_FMC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup FMC_LL + * @{ + */ + +/** @addtogroup FMC_LL_Private_Macros + * @{ + */ + +#define IS_FMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FMC_NORSRAM_BANK1) || \ + ((__BANK__) == FMC_NORSRAM_BANK2) || \ + ((__BANK__) == FMC_NORSRAM_BANK3) || \ + ((__BANK__) == FMC_NORSRAM_BANK4)) +#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \ + ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE)) +#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \ + ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \ + ((__MEMORY__) == FMC_MEMORY_TYPE_NOR)) +#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \ + ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32)) +#define IS_FMC_PAGESIZE(__SIZE__) (((__SIZE__) == FMC_PAGE_SIZE_NONE) || \ + ((__SIZE__) == FMC_PAGE_SIZE_128) || \ + ((__SIZE__) == FMC_PAGE_SIZE_256) || \ + ((__SIZE__) == FMC_PAGE_SIZE_512) || \ + ((__SIZE__) == FMC_PAGE_SIZE_1024)) +#define IS_FMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FMC_WRITE_FIFO_DISABLE) || \ + ((__FIFO__) == FMC_WRITE_FIFO_ENABLE)) +#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \ + ((__MODE__) == FMC_ACCESS_MODE_B) || \ + ((__MODE__) == FMC_ACCESS_MODE_C) || \ + ((__MODE__) == FMC_ACCESS_MODE_D)) +#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \ + ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE)) +#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \ + ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH)) +#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \ + ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS)) +#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \ + ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE)) +#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \ + ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE)) +#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \ + ((__MODE__) == FMC_EXTENDED_MODE_ENABLE)) +#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \ + ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE)) +#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U)) +#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \ + ((__BURST__) == FMC_WRITE_BURST_ENABLE)) +#define IS_FMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \ + ((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC)) +#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U) +#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U)) +#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U)) +#define IS_FMC_DATAHOLD_DURATION(__DATAHOLD__) ((__DATAHOLD__) <= 3U) +#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U) +#define IS_FMC_CLK_DIV(__DIV__) (((__DIV__) > 1U) && ((__DIV__) <= 16U)) +#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE) +#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE) + + +#define IS_FMC_NAND_BANK(__BANK__) ((__BANK__) == FMC_NAND_BANK3) +#define IS_FMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FMC_NAND_WAIT_FEATURE_DISABLE) || \ + ((__FEATURE__) == FMC_NAND_WAIT_FEATURE_ENABLE)) +#define IS_FMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_16)) +#define IS_FMC_ECC_STATE(__STATE__) (((__STATE__) == FMC_NAND_ECC_DISABLE) || \ + ((__STATE__) == FMC_NAND_ECC_ENABLE)) + +#define IS_FMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \ + ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE)) +#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255U) +#define IS_FMC_TAR_TIME(__TIME__) ((__TIME__) <= 255U) +#define IS_FMC_SETUP_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FMC_WAIT_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FMC_HOLD_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FMC_HIZ_TIME(__TIME__) ((__TIME__) <= 254U) +#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE) + + +#define IS_FMC_SDMEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \ + ((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \ + ((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_32)) +#define IS_FMC_WRITE_PROTECTION(__WRITE__) (((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \ + ((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_ENABLE)) +#define IS_FMC_SDCLOCK_PERIOD(__PERIOD__) (((__PERIOD__) == FMC_SDRAM_CLOCK_DISABLE) || \ + ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_2) || \ + ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_3)) +#define IS_FMC_READ_BURST(__RBURST__) (((__RBURST__) == FMC_SDRAM_RBURST_DISABLE) || \ + ((__RBURST__) == FMC_SDRAM_RBURST_ENABLE)) +#define IS_FMC_READPIPE_DELAY(__DELAY__) (((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_0) || \ + ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_1) || \ + ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_2)) +#define IS_FMC_COMMAND_MODE(__COMMAND__) (((__COMMAND__) == FMC_SDRAM_CMD_NORMAL_MODE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_CLK_ENABLE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_PALL) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_LOAD_MODE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \ + ((__COMMAND__) == FMC_SDRAM_CMD_POWERDOWN_MODE)) +#define IS_FMC_COMMAND_TARGET(__TARGET__) (((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1) || \ + ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK2) || \ + ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1_2)) +#define IS_FMC_LOADTOACTIVE_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_EXITSELFREFRESH_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_SELFREFRESH_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 16U)) +#define IS_FMC_ROWCYCLE_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_WRITE_RECOVERY_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 16U)) +#define IS_FMC_RP_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_RCD_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U)) +#define IS_FMC_AUTOREFRESH_NUMBER(__NUMBER__) (((__NUMBER__) > 0U) && ((__NUMBER__) <= 15U)) +#define IS_FMC_MODE_REGISTER(__CONTENT__) ((__CONTENT__) <= 8191U) +#define IS_FMC_REFRESH_RATE(__RATE__) ((__RATE__) <= 8191U) +#define IS_FMC_SDRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_SDRAM_DEVICE) +#define IS_FMC_SDRAM_BANK(__BANK__) (((__BANK__) == FMC_SDRAM_BANK1) || \ + ((__BANK__) == FMC_SDRAM_BANK2)) +#define IS_FMC_COLUMNBITS_NUMBER(__COLUMN__) (((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \ + ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \ + ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \ + ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_11)) +#define IS_FMC_ROWBITS_NUMBER(__ROW__) (((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_11) || \ + ((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_12) || \ + ((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_13)) +#define IS_FMC_INTERNALBANK_NUMBER(__NUMBER__) (((__NUMBER__) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \ + ((__NUMBER__) == FMC_SDRAM_INTERN_BANKS_NUM_4)) +#define IS_FMC_CAS_LATENCY(__LATENCY__) (((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_1) || \ + ((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_2) || \ + ((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_3)) + + +/** + * @} + */ + +/* Exported typedef ----------------------------------------------------------*/ + +/** @defgroup FMC_LL_Exported_typedef FMC Low Layer Exported Types + * @{ + */ + +#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef +#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef +#define FMC_NAND_TypeDef FMC_Bank3_TypeDef +#define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef + +#define FMC_NORSRAM_DEVICE FMC_Bank1_R +#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E_R +#define FMC_NAND_DEVICE FMC_Bank3_R +#define FMC_SDRAM_DEVICE FMC_Bank5_6_R + +/** + * @brief FMC NORSRAM Configuration Structure definition + */ +typedef struct +{ + uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. + This parameter can be a value of @ref FMC_NORSRAM_Bank */ + + uint32_t DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the data bus or not. + This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */ + + uint32_t MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory device. + This parameter can be a value of @ref FMC_Memory_Type */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FMC_NORSRAM_Data_Width */ + + uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FMC_Burst_Access_Mode */ + + uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FMC_Wait_Signal_Polarity */ + + uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FMC_Wait_Timing */ + + uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC. + This parameter can be a value of @ref FMC_Write_Operation */ + + uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FMC_Wait_Signal */ + + uint32_t ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FMC_Extended_Mode */ + + uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FMC_AsynchronousWait */ + + uint32_t WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FMC_Write_Burst */ + + uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices. + This parameter is only enabled through the FMC_BCR1 register, + and don't care through FMC_BCR2..4 registers. + This parameter can be a value of @ref FMC_Continous_Clock */ + + uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller. + This parameter is only enabled through the FMC_BCR1 register, + and don't care through FMC_BCR2..4 registers. + This parameter can be a value of @ref FMC_Write_FIFO */ + + uint32_t PageSize; /*!< Specifies the memory page size. + This parameter can be a value of @ref FMC_Page_Size */ +} FMC_NORSRAM_InitTypeDef; + +/** + * @brief FMC NORSRAM Timing parameters structure definition + */ +typedef struct +{ + uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between Min_Data = 1 and Max_Data = 15. + @note This parameter is not used with synchronous NOR Flash memories. */ + + uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between Min_Data = 1 and Max_Data = 255. + @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed + NOR Flash memories. */ + + uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between Min_Data = 0 and Max_Data = 15. + @note This parameter is only used for multiplexed NOR Flash memories. */ + + uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of + HCLK cycles. This parameter can be a value between Min_Data = 2 and + Max_Data = 16. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM + accesses. */ + + uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between Min_Data = 2 and Max_Data = 17 + in NOR Flash memories with synchronous burst mode enable */ + + uint32_t AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FMC_Access_Mode */ +} FMC_NORSRAM_TimingTypeDef; + +/** + * @brief FMC NAND Configuration Structure definition + */ +typedef struct +{ + uint32_t NandBank; /*!< Specifies the NAND memory device that will be used. + This parameter can be a value of @ref FMC_NAND_Bank */ + + uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device. + This parameter can be any value of @ref FMC_Wait_feature */ + + uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FMC_NAND_Data_Width */ + + uint32_t EccComputation; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FMC_ECC */ + + uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FMC_ECC_Page_Size */ + + uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ + + uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ +} FMC_NAND_InitTypeDef; + +/** + * @brief FMC NAND Timing parameters structure definition + */ +typedef struct +{ + uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between Min_Data = 0 and Max_Data = 254 */ + + uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ + + uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command de-assertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ + + uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + data bus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ +} FMC_NAND_PCC_TimingTypeDef; + + +/** + * @brief FMC SDRAM Configuration Structure definition + */ +typedef struct +{ + uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used. + This parameter can be a value of @ref FMC_SDRAM_Bank */ + + uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address. + This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */ + + uint32_t RowBitsNumber; /*!< Defines the number of bits of column address. + This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */ + + uint32_t MemoryDataWidth; /*!< Defines the memory device width. + This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */ + + uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks. + This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */ + + uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles. + This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */ + + uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode. + This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */ + + uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow + to disable the clock before changing frequency. + This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */ + + uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read + commands during the CAS latency and stores data in the Read FIFO. + This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */ + + uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path. + This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */ +} FMC_SDRAM_InitTypeDef; + +/** + * @brief FMC SDRAM Timing parameters structure definition + */ +typedef struct +{ + uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and + an active or Refresh command in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to + issuing the Activate command in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock + cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command + and the delay between two consecutive Refresh commands in number of + memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command + in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ + + uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write + command in number of memory clock cycles. + This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ +} FMC_SDRAM_TimingTypeDef; + +/** + * @brief SDRAM command parameters structure definition + */ +typedef struct +{ + uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device. + This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */ + + uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to. + This parameter can be a value of @ref FMC_SDRAM_Command_Target. */ + + uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued + in auto refresh mode. + This parameter can be a value between Min_Data = 1 and Max_Data = 15 */ + + uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */ +} FMC_SDRAM_CommandTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @addtogroup FMC_LL_Exported_Constants FMC Low Layer Exported Constants + * @{ + */ + +/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller + * @{ + */ + +/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank + * @{ + */ +#define FMC_NORSRAM_BANK1 (0x00000000U) +#define FMC_NORSRAM_BANK2 (0x00000002U) +#define FMC_NORSRAM_BANK3 (0x00000004U) +#define FMC_NORSRAM_BANK4 (0x00000006U) +/** + * @} + */ + +/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing + * @{ + */ +#define FMC_DATA_ADDRESS_MUX_DISABLE (0x00000000U) +#define FMC_DATA_ADDRESS_MUX_ENABLE (0x00000002U) +/** + * @} + */ + +/** @defgroup FMC_Memory_Type FMC Memory Type + * @{ + */ +#define FMC_MEMORY_TYPE_SRAM (0x00000000U) +#define FMC_MEMORY_TYPE_PSRAM (0x00000004U) +#define FMC_MEMORY_TYPE_NOR (0x00000008U) +/** + * @} + */ + +/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width + * @{ + */ +#define FMC_NORSRAM_MEM_BUS_WIDTH_8 (0x00000000U) +#define FMC_NORSRAM_MEM_BUS_WIDTH_16 (0x00000010U) +#define FMC_NORSRAM_MEM_BUS_WIDTH_32 (0x00000020U) +/** + * @} + */ + +/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access + * @{ + */ +#define FMC_NORSRAM_FLASH_ACCESS_ENABLE (0x00000040U) +#define FMC_NORSRAM_FLASH_ACCESS_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode + * @{ + */ +#define FMC_BURST_ACCESS_MODE_DISABLE (0x00000000U) +#define FMC_BURST_ACCESS_MODE_ENABLE (0x00000100U) +/** + * @} + */ + +/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity + * @{ + */ +#define FMC_WAIT_SIGNAL_POLARITY_LOW (0x00000000U) +#define FMC_WAIT_SIGNAL_POLARITY_HIGH (0x00000200U) +/** + * @} + */ + +/** @defgroup FMC_Wait_Timing FMC Wait Timing + * @{ + */ +#define FMC_WAIT_TIMING_BEFORE_WS (0x00000000U) +#define FMC_WAIT_TIMING_DURING_WS (0x00000800U) +/** + * @} + */ + +/** @defgroup FMC_Write_Operation FMC Write Operation + * @{ + */ +#define FMC_WRITE_OPERATION_DISABLE (0x00000000U) +#define FMC_WRITE_OPERATION_ENABLE (0x00001000U) +/** + * @} + */ + +/** @defgroup FMC_Wait_Signal FMC Wait Signal + * @{ + */ +#define FMC_WAIT_SIGNAL_DISABLE (0x00000000U) +#define FMC_WAIT_SIGNAL_ENABLE (0x00002000U) +/** + * @} + */ + +/** @defgroup FMC_Extended_Mode FMC Extended Mode + * @{ + */ +#define FMC_EXTENDED_MODE_DISABLE (0x00000000U) +#define FMC_EXTENDED_MODE_ENABLE (0x00004000U) +/** + * @} + */ + +/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait + * @{ + */ +#define FMC_ASYNCHRONOUS_WAIT_DISABLE (0x00000000U) +#define FMC_ASYNCHRONOUS_WAIT_ENABLE (0x00008000U) +/** + * @} + */ + +/** @defgroup FMC_Page_Size FMC Page Size + * @{ + */ +#define FMC_PAGE_SIZE_NONE (0x00000000U) +#define FMC_PAGE_SIZE_128 FMC_BCRx_CPSIZE_0 +#define FMC_PAGE_SIZE_256 FMC_BCRx_CPSIZE_1 +#define FMC_PAGE_SIZE_512 (FMC_BCRx_CPSIZE_0\ + | FMC_BCRx_CPSIZE_1) +#define FMC_PAGE_SIZE_1024 FMC_BCRx_CPSIZE_2 +/** + * @} + */ + +/** @defgroup FMC_Write_Burst FMC Write Burst + * @{ + */ +#define FMC_WRITE_BURST_DISABLE (0x00000000U) +#define FMC_WRITE_BURST_ENABLE (0x00080000U) +/** + * @} + */ + +/** @defgroup FMC_Continous_Clock FMC Continuous Clock + * @{ + */ +#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY (0x00000000U) +#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC (0x00100000U) +/** + * @} + */ + +#if defined(FMC_BCR1_WFDIS) +/** @defgroup FMC_Write_FIFO FMC Write FIFO + * @{ + */ +#define FMC_WRITE_FIFO_DISABLE FMC_BCR1_WFDIS +#define FMC_WRITE_FIFO_ENABLE (0x00000000U) +#endif /* FMC_BCR1_WFDIS */ +/** + * @} + */ + +/** @defgroup FMC_Access_Mode FMC Access Mode + * @{ + */ +#define FMC_ACCESS_MODE_A (0x00000000U) +#define FMC_ACCESS_MODE_B (0x10000000U) +#define FMC_ACCESS_MODE_C (0x20000000U) +#define FMC_ACCESS_MODE_D (0x30000000U) +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller + * @{ + */ +/** @defgroup FMC_NAND_Bank FMC NAND Bank + * @{ + */ +#define FMC_NAND_BANK3 (0x00000100U) +/** + * @} + */ + +/** @defgroup FMC_Wait_feature FMC Wait feature + * @{ + */ +#define FMC_NAND_WAIT_FEATURE_DISABLE (0x00000000U) +#define FMC_NAND_WAIT_FEATURE_ENABLE (0x00000002U) +/** + * @} + */ + +/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type + * @{ + */ +#define FMC_PCR_MEMORY_TYPE_NAND (0x00000008U) +/** + * @} + */ + +/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width + * @{ + */ +#define FMC_NAND_MEM_BUS_WIDTH_8 (0x00000000U) +#define FMC_NAND_MEM_BUS_WIDTH_16 (0x00000010U) +/** + * @} + */ + +/** @defgroup FMC_ECC FMC ECC + * @{ + */ +#define FMC_NAND_ECC_DISABLE (0x00000000U) +#define FMC_NAND_ECC_ENABLE (0x00000040U) +/** + * @} + */ + +/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size + * @{ + */ +#define FMC_NAND_ECC_PAGE_SIZE_256BYTE (0x00000000U) +#define FMC_NAND_ECC_PAGE_SIZE_512BYTE (0x00020000U) +#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE (0x00040000U) +#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE (0x00060000U) +#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE (0x00080000U) +#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE (0x000A0000U) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller + * @{ + */ +/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank + * @{ + */ +#define FMC_SDRAM_BANK1 (0x00000000U) +#define FMC_SDRAM_BANK2 (0x00000001U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number + * @{ + */ +#define FMC_SDRAM_COLUMN_BITS_NUM_8 (0x00000000U) +#define FMC_SDRAM_COLUMN_BITS_NUM_9 (0x00000001U) +#define FMC_SDRAM_COLUMN_BITS_NUM_10 (0x00000002U) +#define FMC_SDRAM_COLUMN_BITS_NUM_11 (0x00000003U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number + * @{ + */ +#define FMC_SDRAM_ROW_BITS_NUM_11 (0x00000000U) +#define FMC_SDRAM_ROW_BITS_NUM_12 (0x00000004U) +#define FMC_SDRAM_ROW_BITS_NUM_13 (0x00000008U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width + * @{ + */ +#define FMC_SDRAM_MEM_BUS_WIDTH_8 (0x00000000U) +#define FMC_SDRAM_MEM_BUS_WIDTH_16 (0x00000010U) +#define FMC_SDRAM_MEM_BUS_WIDTH_32 (0x00000020U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number + * @{ + */ +#define FMC_SDRAM_INTERN_BANKS_NUM_2 (0x00000000U) +#define FMC_SDRAM_INTERN_BANKS_NUM_4 (0x00000040U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency + * @{ + */ +#define FMC_SDRAM_CAS_LATENCY_1 (0x00000080U) +#define FMC_SDRAM_CAS_LATENCY_2 (0x00000100U) +#define FMC_SDRAM_CAS_LATENCY_3 (0x00000180U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection + * @{ + */ +#define FMC_SDRAM_WRITE_PROTECTION_DISABLE (0x00000000U) +#define FMC_SDRAM_WRITE_PROTECTION_ENABLE (0x00000200U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period + * @{ + */ +#define FMC_SDRAM_CLOCK_DISABLE (0x00000000U) +#define FMC_SDRAM_CLOCK_PERIOD_2 (0x00000800U) +#define FMC_SDRAM_CLOCK_PERIOD_3 (0x00000C00U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst + * @{ + */ +#define FMC_SDRAM_RBURST_DISABLE (0x00000000U) +#define FMC_SDRAM_RBURST_ENABLE (0x00001000U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay + * @{ + */ +#define FMC_SDRAM_RPIPE_DELAY_0 (0x00000000U) +#define FMC_SDRAM_RPIPE_DELAY_1 (0x00002000U) +#define FMC_SDRAM_RPIPE_DELAY_2 (0x00004000U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode + * @{ + */ +#define FMC_SDRAM_CMD_NORMAL_MODE (0x00000000U) +#define FMC_SDRAM_CMD_CLK_ENABLE (0x00000001U) +#define FMC_SDRAM_CMD_PALL (0x00000002U) +#define FMC_SDRAM_CMD_AUTOREFRESH_MODE (0x00000003U) +#define FMC_SDRAM_CMD_LOAD_MODE (0x00000004U) +#define FMC_SDRAM_CMD_SELFREFRESH_MODE (0x00000005U) +#define FMC_SDRAM_CMD_POWERDOWN_MODE (0x00000006U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target + * @{ + */ +#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2 +#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1 +#define FMC_SDRAM_CMD_TARGET_BANK1_2 (0x00000018U) +/** + * @} + */ + +/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status + * @{ + */ +#define FMC_SDRAM_NORMAL_MODE (0x00000000U) +#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0 +#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1 +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup FMC_LL_Interrupt_definition FMC Low Layer Interrupt definition + * @{ + */ +#define FMC_IT_RISING_EDGE (0x00000008U) +#define FMC_IT_LEVEL (0x00000010U) +#define FMC_IT_FALLING_EDGE (0x00000020U) +#define FMC_IT_REFRESH_ERROR (0x00004000U) +/** + * @} + */ + +/** @defgroup FMC_LL_Flag_definition FMC Low Layer Flag definition + * @{ + */ +#define FMC_FLAG_RISING_EDGE (0x00000001U) +#define FMC_FLAG_LEVEL (0x00000002U) +#define FMC_FLAG_FALLING_EDGE (0x00000004U) +#define FMC_FLAG_FEMPT (0x00000040U) +#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE +#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY +#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup FMC_LL_Private_Macros FMC_LL Private Macros + * @{ + */ +/** + * @brief Enable the FMC Peripheral. + * @retval None + */ +#define __FMC_ENABLE() (FMC_Bank1_R->BTCR[0] |= FMC_BCR1_FMCEN) + +/** + * @brief Disable the FMC Peripheral. + * @retval None + */ +#define __FMC_DISABLE() (FMC_Bank1_R->BTCR[0] &= ~FMC_BCR1_FMCEN) +/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros + * @brief macros to handle NOR device enable/disable and read/write operations + * @{ + */ + +/** + * @brief Enable the NORSRAM device access. + * @param __INSTANCE__ FMC_NORSRAM Instance + * @param __BANK__ FMC_NORSRAM Bank + * @retval None + */ +#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ + |= FMC_BCRx_MBKEN) + +/** + * @brief Disable the NORSRAM device access. + * @param __INSTANCE__ FMC_NORSRAM Instance + * @param __BANK__ FMC_NORSRAM Bank + * @retval None + */ +#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\ + &= ~FMC_BCRx_MBKEN) + +/** + * @} + */ + +/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros + * @brief macros to handle NAND device enable/disable + * @{ + */ + +/** + * @brief Enable the NAND device access. + * @param __INSTANCE__ FMC_NAND Instance + * @retval None + */ +#define __FMC_NAND_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN) + +/** + * @brief Disable the NAND device access. + * @param __INSTANCE__ FMC_NAND Instance + * @param __BANK__ FMC_NAND Bank + * @retval None + */ +#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->PCR, FMC_PCR_PBKEN) + +/** + * @} + */ + +/** @defgroup FMC_LL_NAND_Interrupt FMC NAND Interrupt + * @brief macros to handle NAND interrupts + * @{ + */ + +/** + * @brief Enable the NAND device interrupt. + * @param __INSTANCE__ FMC_NAND instance + * @param __INTERRUPT__ FMC_NAND interrupt + * This parameter can be any combination of the following values: + * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FMC_IT_LEVEL: Interrupt level. + * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__)) + +/** + * @brief Disable the NAND device interrupt. + * @param __INSTANCE__ FMC_NAND Instance + * @param __INTERRUPT__ FMC_NAND interrupt + * This parameter can be any combination of the following values: + * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. + * @arg FMC_IT_LEVEL: Interrupt level. + * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. + * @retval None + */ +#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__)) + +/** + * @brief Get flag status of the NAND device. + * @param __INSTANCE__ FMC_NAND Instance + * @param __BANK__ FMC_NAND Bank + * @param __FLAG__ FMC_NAND flag + * This parameter can be any combination of the following values: + * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FMC_FLAG_FEMPT: FIFO empty flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear flag status of the NAND device. + * @param __INSTANCE__ FMC_NAND Instance + * @param __FLAG__ FMC_NAND flag + * This parameter can be any combination of the following values: + * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. + * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. + * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. + * @arg FMC_FLAG_FEMPT: FIFO empty flag. + * @retval None + */ +#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__)) + +/** + * @} + */ + + +/** @defgroup FMC_LL_SDRAM_Interrupt FMC SDRAM Interrupt + * @brief macros to handle SDRAM interrupts + * @{ + */ + +/** + * @brief Enable the SDRAM device interrupt. + * @param __INSTANCE__ FMC_SDRAM instance + * @param __INTERRUPT__ FMC_SDRAM interrupt + * This parameter can be any combination of the following values: + * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error + * @retval None + */ +#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__)) + +/** + * @brief Disable the SDRAM device interrupt. + * @param __INSTANCE__ FMC_SDRAM instance + * @param __INTERRUPT__ FMC_SDRAM interrupt + * This parameter can be any combination of the following values: + * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error + * @retval None + */ +#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__)) + +/** + * @brief Get flag status of the SDRAM device. + * @param __INSTANCE__ FMC_SDRAM instance + * @param __FLAG__ FMC_SDRAM flag + * This parameter can be any combination of the following values: + * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error. + * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag. + * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear flag status of the SDRAM device. + * @param __INSTANCE__ FMC_SDRAM instance + * @param __FLAG__ FMC_SDRAM flag + * This parameter can be any combination of the following values: + * @arg FMC_SDRAM_FLAG_REFRESH_ERROR + * @retval None + */ +#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__)) + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions + * @{ + */ + +/** @defgroup FMC_LL_NORSRAM NOR SRAM + * @{ + */ +/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_InitTypeDef *Init); +HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, + FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, + uint32_t ExtendedMode); +HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions + * @{ + */ +HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); +/** + * @} + */ +/** + * @} + */ + +/** @defgroup FMC_LL_NAND NAND + * @{ + */ +/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init); +HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, + FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, + FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions + * @{ + */ +HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, + uint32_t Timeout); +/** + * @} + */ +/** + * @} + */ + + +/** @defgroup FMC_LL_SDRAM SDRAM + * @{ + */ +/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions + * @{ + */ +HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init); +HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, + FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank); +HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank); +/** + * @} + */ + +/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions + * @{ + */ +HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); +HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, + FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout); +HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate); +HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, + uint32_t AutoRefreshNumber); +uint32_t FMC_SDRAM_GetModeStatus(const FMC_SDRAM_TypeDef *Device, uint32_t Bank); +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_FMC_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h new file mode 100644 index 0000000..b51f9d3 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h @@ -0,0 +1,984 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_GPIO_H +#define STM32H7xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) + +/** @defgroup GPIO_LL GPIO + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \ + GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \ + GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \ + GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \ + GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \ + GPIO_BSRR_BS15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */ +/** + * @} + */ +#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW +#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM +#define LL_GPIO_SPEED_FAST LL_GPIO_SPEED_FREQ_HIGH +#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_VERY_HIGH + + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ +#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ +#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ +#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ +#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ +#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0), ((Pin * Pin) * Mode)); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0), ((Pin * Pin) * Speed)); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0), ((Pin * Pin) * Pull)); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0), + ((((Pin * Pin) * Pin) * Pin) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8), + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) * + (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U))); +} + + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask << 16U); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /*defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_GPIO_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h new file mode 100644 index 0000000..cff88b5 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h @@ -0,0 +1,902 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_hsem.h + * @author MCD Application Team + * @brief Header file of HSEM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_HSEM_H +#define STM32H7xx_LL_HSEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(HSEM) + +/** @defgroup HSEM_LL HSEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HSEM_LL_Exported_Constants HSEM Exported Constants + * @{ + */ + +/** @defgroup HSEM_LL_EC_COREID COREID Defines + * @{ + */ +#define LL_HSEM_COREID_NONE 0U +#define LL_HSEM_COREID_CPU1 HSEM_CR_COREID_CPU1 +#if defined(DUAL_CORE) +#define LL_HSEM_COREID_CPU2 HSEM_CR_COREID_CPU2 +#endif /* DUAL_CORE */ +#define LL_HSEM_COREID HSEM_CR_COREID_CURRENT +/** + * @} + */ + + +/** @defgroup HSEM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_HSEM_ReadReg function + * @{ + */ + +#define LL_HSEM_SEMAPHORE_0 HSEM_C1IER_ISE0 +#define LL_HSEM_SEMAPHORE_1 HSEM_C1IER_ISE1 +#define LL_HSEM_SEMAPHORE_2 HSEM_C1IER_ISE2 +#define LL_HSEM_SEMAPHORE_3 HSEM_C1IER_ISE3 +#define LL_HSEM_SEMAPHORE_4 HSEM_C1IER_ISE4 +#define LL_HSEM_SEMAPHORE_5 HSEM_C1IER_ISE5 +#define LL_HSEM_SEMAPHORE_6 HSEM_C1IER_ISE6 +#define LL_HSEM_SEMAPHORE_7 HSEM_C1IER_ISE7 +#define LL_HSEM_SEMAPHORE_8 HSEM_C1IER_ISE8 +#define LL_HSEM_SEMAPHORE_9 HSEM_C1IER_ISE9 +#define LL_HSEM_SEMAPHORE_10 HSEM_C1IER_ISE10 +#define LL_HSEM_SEMAPHORE_11 HSEM_C1IER_ISE11 +#define LL_HSEM_SEMAPHORE_12 HSEM_C1IER_ISE12 +#define LL_HSEM_SEMAPHORE_13 HSEM_C1IER_ISE13 +#define LL_HSEM_SEMAPHORE_14 HSEM_C1IER_ISE14 +#define LL_HSEM_SEMAPHORE_15 HSEM_C1IER_ISE15 +#if (HSEM_SEMID_MAX == 15) +#define LL_HSEM_SEMAPHORE_ALL 0x0000FFFFU +#else /* HSEM_SEMID_MAX == 31 */ +#define LL_HSEM_SEMAPHORE_16 HSEM_C1IER_ISE16 +#define LL_HSEM_SEMAPHORE_17 HSEM_C1IER_ISE17 +#define LL_HSEM_SEMAPHORE_18 HSEM_C1IER_ISE18 +#define LL_HSEM_SEMAPHORE_19 HSEM_C1IER_ISE19 +#define LL_HSEM_SEMAPHORE_20 HSEM_C1IER_ISE20 +#define LL_HSEM_SEMAPHORE_21 HSEM_C1IER_ISE21 +#define LL_HSEM_SEMAPHORE_22 HSEM_C1IER_ISE22 +#define LL_HSEM_SEMAPHORE_23 HSEM_C1IER_ISE23 +#define LL_HSEM_SEMAPHORE_24 HSEM_C1IER_ISE24 +#define LL_HSEM_SEMAPHORE_25 HSEM_C1IER_ISE25 +#define LL_HSEM_SEMAPHORE_26 HSEM_C1IER_ISE26 +#define LL_HSEM_SEMAPHORE_27 HSEM_C1IER_ISE27 +#define LL_HSEM_SEMAPHORE_28 HSEM_C1IER_ISE28 +#define LL_HSEM_SEMAPHORE_29 HSEM_C1IER_ISE29 +#define LL_HSEM_SEMAPHORE_30 HSEM_C1IER_ISE30 +#define LL_HSEM_SEMAPHORE_31 HSEM_C1IER_ISE31 +#define LL_HSEM_SEMAPHORE_ALL 0xFFFFFFFFU +#endif /* HSEM_SEMID_MAX == 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HSEM_LL_Exported_Macros HSEM Exported Macros + * @{ + */ + +/** @defgroup HSEM_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in HSEM register + * @param __INSTANCE__ HSEM Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_HSEM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in HSEM register + * @param __INSTANCE__ HSEM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_HSEM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup HSEM_LL_Exported_Functions HSEM Exported Functions + * @{ + */ + +/** @defgroup HSEM_LL_EF_Data_Management Data_Management + * @{ + */ + + +/** + * @brief Return 1 if the semaphore is locked, else return 0. + * @rmtoll R LOCK LL_HSEM_IsSemaphoreLocked + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsSemaphoreLocked(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return ((READ_BIT(HSEMx->R[Semaphore], HSEM_R_LOCK) == (HSEM_R_LOCK_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Get core id. + * @rmtoll R COREID LL_HSEM_GetCoreId + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval Returned value can be one of the following values: + * @arg @ref LL_HSEM_COREID_NONE + * @arg @ref LL_HSEM_COREID_CPU1 + * @arg @ref LL_HSEM_COREID_CPU2 + */ +__STATIC_INLINE uint32_t LL_HSEM_GetCoreId(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_COREID_Msk)); +} + +/** + * @brief Get process id. + * @rmtoll R PROCID LL_HSEM_GetProcessId + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval Process number. Value between Min_Data=0 and Max_Data=255 + */ +__STATIC_INLINE uint32_t LL_HSEM_GetProcessId(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_PROCID_Msk)); +} + +/** + * @brief Get the lock by writing in R register. + * @note The R register has to be read to determined if the lock is taken. + * @rmtoll R LOCK LL_HSEM_SetLock + * @rmtoll R COREID LL_HSEM_SetLock + * @rmtoll R PROCID LL_HSEM_SetLock + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @param process Process id. Value between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_HSEM_SetLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) +{ + WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process)); +} + +/** + * @brief Get the lock with 2-step lock. + * @rmtoll R LOCK LL_HSEM_2StepLock + * @rmtoll R COREID LL_HSEM_2StepLock + * @rmtoll R PROCID LL_HSEM_2StepLock + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @param process Process id. Value between Min_Data=0 and Max_Data=255 + * @retval 1 lock fail, 0 lock successful or already locked by same process and core + */ +__STATIC_INLINE uint32_t LL_HSEM_2StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) +{ + WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process)); + return ((HSEMx->R[Semaphore] != (HSEM_R_LOCK | LL_HSEM_COREID | process)) ? 1UL : 0UL); +} + +/** + * @brief Get the lock with 1-step lock. + * @rmtoll RLR LOCK LL_HSEM_1StepLock + * @rmtoll RLR COREID LL_HSEM_1StepLock + * @rmtoll RLR PROCID LL_HSEM_1StepLock + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval 1 lock fail, 0 lock successful or already locked by same core + */ +__STATIC_INLINE uint32_t LL_HSEM_1StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return ((HSEMx->RLR[Semaphore] != (HSEM_RLR_LOCK | LL_HSEM_COREID)) ? 1UL : 0UL); +} + +/** + * @brief Release the lock of the semaphore. + * @note In case of LL_HSEM_1StepLock usage to lock a semaphore, the process is 0. + * @rmtoll R LOCK LL_HSEM_ReleaseLock + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @param process Process number. Value between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_HSEM_ReleaseLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) +{ + WRITE_REG(HSEMx->R[Semaphore], (LL_HSEM_COREID | process)); +} + +/** + * @brief Get the lock status of the semaphore. + * @rmtoll R LOCK LL_HSEM_GetStatus + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval 0 semaphore is free, 1 semaphore is locked */ +__STATIC_INLINE uint32_t LL_HSEM_GetStatus(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return ((HSEMx->R[Semaphore] != 0U) ? 1UL : 0UL); +} + +/** + * @brief Set the key. + * @rmtoll KEYR KEY LL_HSEM_SetKey + * @param HSEMx HSEM Instance. + * @param key Key value. + * @retval None + */ +__STATIC_INLINE void LL_HSEM_SetKey(HSEM_TypeDef *HSEMx, uint32_t key) +{ + WRITE_REG(HSEMx->KEYR, key << HSEM_KEYR_KEY_Pos); +} + +/** + * @brief Get the key. + * @rmtoll KEYR KEY LL_HSEM_GetKey + * @param HSEMx HSEM Instance. + * @retval key to unlock all semaphore from the same core + */ +__STATIC_INLINE uint32_t LL_HSEM_GetKey(HSEM_TypeDef *HSEMx) +{ + return (uint32_t)(READ_BIT(HSEMx->KEYR, HSEM_KEYR_KEY) >> HSEM_KEYR_KEY_Pos); +} + +/** + * @brief Release all semaphore with the same core id. + * @rmtoll CR KEY LL_HSEM_ResetAllLock + * @rmtoll CR SEC LL_HSEM_ResetAllLock + * @rmtoll CR PRIV LL_HSEM_ResetAllLock + * @param HSEMx HSEM Instance. + * @param key Key value. + * @param core This parameter can be one of the following values: + * @arg @ref LL_HSEM_COREID_CPU1 + * @arg @ref LL_HSEM_COREID_CPU2 + * @retval None + */ +__STATIC_INLINE void LL_HSEM_ResetAllLock(HSEM_TypeDef *HSEMx, uint32_t key, uint32_t core) +{ + WRITE_REG(HSEMx->CR, (key << HSEM_CR_KEY_Pos) | core); +} + +/** + * @} + */ + +/** @defgroup HSEM_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable interrupt. + * @rmtoll C1IER ISEM LL_HSEM_EnableIT_C1IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_HSEM_EnableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + SET_BIT(HSEMx->C1IER, SemaphoreMask); +} + +/** + * @brief Disable interrupt. + * @rmtoll C1IER ISEM LL_HSEM_DisableIT_C1IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_HSEM_DisableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + CLEAR_BIT(HSEMx->C1IER, SemaphoreMask); +} + +/** + * @brief Check if interrupt is enabled. + * @rmtoll C1IER ISEM LL_HSEM_IsEnabledIT_C1IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C1IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable interrupt. + * @rmtoll C2IER ISEM LL_HSEM_EnableIT_C2IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval None + */ +__STATIC_INLINE void LL_HSEM_EnableIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + SET_BIT(HSEMx->C2IER, SemaphoreMask); +} + +/** + * @brief Disable interrupt. + * @rmtoll C2IER ISEM LL_HSEM_DisableIT_C2IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval None + */ +__STATIC_INLINE void LL_HSEM_DisableIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + CLEAR_BIT(HSEMx->C2IER, SemaphoreMask); +} + +/** + * @brief Check if interrupt is enabled. + * @rmtoll C2IER ISEM LL_HSEM_IsEnabledIT_C2IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C2IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/** @defgroup HSEM_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Clear interrupt status. + * @rmtoll C1ICR ISEM LL_HSEM_ClearFlag_C1ICR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_HSEM_ClearFlag_C1ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + WRITE_REG(HSEMx->C1ICR, SemaphoreMask); +} + +/** + * @brief Get interrupt status from ISR register. + * @rmtoll C1ISR ISEM LL_HSEM_IsActiveFlag_C1ISR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C1ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} + +/** + * @brief Get interrupt status from MISR register. + * @rmtoll C1MISR ISEM LL_HSEM_IsActiveFlag_C1MISR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C1MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} + +#if defined(DUAL_CORE) +/** + * @brief Clear interrupt status. + * @rmtoll C2ICR ISEM LL_HSEM_ClearFlag_C2ICR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval None + */ +__STATIC_INLINE void LL_HSEM_ClearFlag_C2ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + WRITE_REG(HSEMx->C2ICR, SemaphoreMask); +} + +/** + * @brief Get interrupt status from ISR register. + * @rmtoll C2ISR ISEM LL_HSEM_IsActiveFlag_C2ISR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C2ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C2ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} + +/** + * @brief Get interrupt status from MISR register. + * @rmtoll C2MISR ISEM LL_HSEM_IsActiveFlag_C2MISR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C2MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C2MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(HSEM) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_HSEM_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_i2c.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_i2c.h new file mode 100644 index 0000000..6400400 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_i2c.h @@ -0,0 +1,2279 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_i2c.h + * @author MCD Application Team + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_I2C_H +#define STM32H7xx_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) || defined (I2C3) || defined (I2C4) || defined (I2C5) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_Private_Macros I2C Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetMode(). */ + + uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values. + This parameter must be set by referring to the STM32CubeMX Tool and + the helper macro @ref __LL_I2C_CONVERT_TIMINGS(). + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetTiming(). */ + + uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION. + + This feature can be modified afterwards using unitary functions + @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ + + uint32_t DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetDigitalFilter(). */ + + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive + match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_I2C_WriteReg function + * @{ + */ +#define LL_I2C_ICR_ADDRCF I2C_ICR_ADDRCF /*!< Address Matched flag */ +#define LL_I2C_ICR_NACKCF I2C_ICR_NACKCF /*!< Not Acknowledge flag */ +#define LL_I2C_ICR_STOPCF I2C_ICR_STOPCF /*!< Stop detection flag */ +#define LL_I2C_ICR_BERRCF I2C_ICR_BERRCF /*!< Bus error flag */ +#define LL_I2C_ICR_ARLOCF I2C_ICR_ARLOCF /*!< Arbitration Lost flag */ +#define LL_I2C_ICR_OVRCF I2C_ICR_OVRCF /*!< Overrun/Underrun flag */ +#define LL_I2C_ICR_PECCF I2C_ICR_PECCF /*!< PEC error flag */ +#define LL_I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF /*!< Timeout detection flag */ +#define LL_I2C_ICR_ALERTCF I2C_ICR_ALERTCF /*!< Alert flag */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_ISR_TXE I2C_ISR_TXE /*!< Transmit data register empty */ +#define LL_I2C_ISR_TXIS I2C_ISR_TXIS /*!< Transmit interrupt status */ +#define LL_I2C_ISR_RXNE I2C_ISR_RXNE /*!< Receive data register not empty */ +#define LL_I2C_ISR_ADDR I2C_ISR_ADDR /*!< Address matched (slave mode) */ +#define LL_I2C_ISR_NACKF I2C_ISR_NACKF /*!< Not Acknowledge received flag */ +#define LL_I2C_ISR_STOPF I2C_ISR_STOPF /*!< Stop detection flag */ +#define LL_I2C_ISR_TC I2C_ISR_TC /*!< Transfer Complete (master mode) */ +#define LL_I2C_ISR_TCR I2C_ISR_TCR /*!< Transfer Complete Reload */ +#define LL_I2C_ISR_BERR I2C_ISR_BERR /*!< Bus error */ +#define LL_I2C_ISR_ARLO I2C_ISR_ARLO /*!< Arbitration lost */ +#define LL_I2C_ISR_OVR I2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */ +#define LL_I2C_ISR_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_ISR_ALERT I2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_ISR_BUSY I2C_ISR_BUSY /*!< Bus busy */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR1_TXIE I2C_CR1_TXIE /*!< TX Interrupt enable */ +#define LL_I2C_CR1_RXIE I2C_CR1_RXIE /*!< RX Interrupt enable */ +#define LL_I2C_CR1_ADDRIE I2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */ +#define LL_I2C_CR1_NACKIE I2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */ +#define LL_I2C_CR1_STOPIE I2C_CR1_STOPIE /*!< STOP detection Interrupt enable */ +#define LL_I2C_CR1_TCIE I2C_CR1_TCIE /*!< Transfer Complete interrupt enable */ +#define LL_I2C_CR1_ERRIE I2C_CR1_ERRIE /*!< Error interrupts enable */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode + (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection + * @{ + */ +#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ +#define LL_I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF /*!< Analog filter is disabled. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRESSING_MODE Master Addressing Mode + * @{ + */ +#define LL_I2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */ +#define LL_I2C_ADDRESSING_MODE_10BIT I2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT I2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks + * @{ + */ +#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */ +#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. + All Address2 are acknowledged. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK I2C_CR2_NACK /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRSLAVE Slave Address Length + * @{ + */ +#define LL_I2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */ +#define LL_I2C_ADDRSLAVE_10BIT I2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_REQUEST Transfer Request Direction + * @{ + */ +#define LL_I2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */ +#define LL_I2C_REQUEST_READ I2C_CR2_RD_WRN /*!< Master request a read transfer. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_MODE Transfer End Mode + * @{ + */ +#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */ +#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Software end mode with HW PEC comparison. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation + * @{ + */ +#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U +/*!< Don't Generate Stop and Start condition. */ +#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +/*!< Generate Stop condition (Size should be set to 0). */ +#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Start for read request. */ +#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Start for write request. */ +#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Restart for read request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | \ + I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) +/*!< Generate Restart for read request, slave 10Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 10Bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, + slave enters receiver mode. */ +#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, + slave enters transmitter mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for + transmission */ +#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for + reception */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect + SCL low level timeout. */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect + both SCL and SDA high level timeout.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */ +#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) + enable bit */ +#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | \ + I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB +(extended clock) enable bits */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings + * @{ + */ +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @param __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tscldel = (SCLDEL+1)xtpresc) + * @param __HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tsdadel = SDADELxtpresc) + * @param __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tsclh = (SCLH+1)xtpresc) + * @param __SCLL_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tscll = (SCLL+1)xtpresc) + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \ + ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \ + (((uint32_t)(__SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \ + (((uint32_t)(__HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \ + (((uint32_t)(__SCLH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \ + (((uint32_t)(__SCLL_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @note When PE = 0, the I2C SCL and SDA lines are released. + * Internal state machines and status bits are put back to their reset value. + * When cleared, PE must be kept low for at least 3 APB clock cycles. + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)) ? 1UL : 0UL); +} + +/** + * @brief Configure Noise Filters (Analog and Digital). + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * The filters can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_ConfigFilters\n + * CR1 DNF LL_I2C_ConfigFilters + * @param I2Cx I2C Instance. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref LL_I2C_ANALOGFILTER_ENABLE + * @arg @ref LL_I2C_ANALOGFILTER_DISABLE + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ANFOFF | I2C_CR1_DNF, AnalogFilter | (DigitalFilter << I2C_CR1_DNF_Pos)); +} + +/** + * @brief Configure Digital Noise Filter. + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 DNF LL_I2C_SetDigitalFilter + * @param I2Cx I2C Instance. + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_DNF, DigitalFilter << I2C_CR1_DNF_Pos); +} + +/** + * @brief Get the current Digital Noise Filter configuration. + * @rmtoll CR1 DNF LL_I2C_GetDigitalFilter + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_DNF) >> I2C_CR1_DNF_Pos); +} + +/** + * @brief Enable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_EnableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Disable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_DisableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Check if Analog Noise Filter is enabled or disabled. + * @rmtoll CR1 ANFOFF LL_I2C_IsEnabledAnalogFilter + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ANFOFF) != (I2C_CR1_ANFOFF)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR1 TXDMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN) == (I2C_CR1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR1 RXDMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN) == (I2C_CR1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TXDR TXDATA LL_I2C_DMA_GetRegAddr\n + * RXDR RXDATA LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I2C_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_I2C_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(const I2C_TypeDef *I2Cx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT) + { + /* return address of TXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->TXDR); + } + else + { + /* return address of RXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->RXDR); + } + + return data_reg_addr; +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)) ? 1UL : 0UL); +} + +/** + * @brief Enable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_EnableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Disable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_DisableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Check if hardware byte control in slave mode is enabled or disabled. + * @rmtoll CR1 SBC LL_I2C_IsEnabledSlaveByteControl + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_SBC) == (I2C_CR1_SBC)) ? 1UL : 0UL); +} + +/** + * @brief Enable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when Digital Filter is disabled. + * @rmtoll CR1 WUPEN LL_I2C_EnableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Disable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_DisableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Check if Wakeup from STOP is enabled or disabled. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_IsEnabledWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledWakeUpFromStop(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_WUPEN) == (I2C_CR1_WUPEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 GCEN LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 GCEN LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 GCEN LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_GCEN) == (I2C_CR1_GCEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode. + * @note Changing this bit is not allowed, when the START bit is set. + * @rmtoll CR2 ADD10 LL_I2C_SetMasterAddressingMode + * @param I2Cx I2C Instance. + * @param AddressingMode This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMasterAddressingMode(I2C_TypeDef *I2Cx, uint32_t AddressingMode) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_ADD10, AddressingMode); +} + +/** + * @brief Get the Master addressing mode. + * @rmtoll CR2 ADD10 LL_I2C_GetMasterAddressingMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + */ +__STATIC_INLINE uint32_t LL_I2C_GetMasterAddressingMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_ADD10)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 OA1 LL_I2C_SetOwnAddress1\n + * OAR1 OA1MODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_OA1 | I2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Enable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_EnableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress1(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Disable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_DisableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress1(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR1 OA1EN LL_I2C_IsEnabledOwnAddress1 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress1(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN) == (I2C_OAR1_OA1EN)) ? 1UL : 0UL); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 OA2 LL_I2C_SetOwnAddress2\n + * OAR2 OA2MSK LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F. + * @param OwnAddrMask This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS2_NOMASK + * @arg @ref LL_I2C_OWNADDRESS2_MASK01 + * @arg @ref LL_I2C_OWNADDRESS2_MASK02 + * @arg @ref LL_I2C_OWNADDRESS2_MASK03 + * @arg @ref LL_I2C_OWNADDRESS2_MASK04 + * @arg @ref LL_I2C_OWNADDRESS2_MASK05 + * @arg @ref LL_I2C_OWNADDRESS2_MASK06 + * @arg @ref LL_I2C_OWNADDRESS2_MASK07 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_OA2 | I2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 OA2EN LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN) == (I2C_OAR2_OA2EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TIMINGR TIMINGR LL_I2C_SetTiming + * @param I2Cx I2C Instance. + * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @note This parameter is computed with the STM32CubeMX Tool. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTiming(I2C_TypeDef *I2Cx, uint32_t Timing) +{ + WRITE_REG(I2Cx->TIMINGR, Timing); +} + +/** + * @brief Get the Timing Prescaler setting. + * @rmtoll TIMINGR PRESC LL_I2C_GetTimingPrescaler + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTimingPrescaler(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_PRESC) >> I2C_TIMINGR_PRESC_Pos); +} + +/** + * @brief Get the SCL low period setting. + * @rmtoll TIMINGR SCLL LL_I2C_GetClockLowPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockLowPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLL) >> I2C_TIMINGR_SCLL_Pos); +} + +/** + * @brief Get the SCL high period setting. + * @rmtoll TIMINGR SCLH LL_I2C_GetClockHighPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockHighPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLH) >> I2C_TIMINGR_SCLH_Pos); +} + +/** + * @brief Get the SDA hold time. + * @rmtoll TIMINGR SDADEL LL_I2C_GetDataHoldTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataHoldTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SDADEL) >> I2C_TIMINGR_SDADEL_Pos); +} + +/** + * @brief Get the SDA setup time. + * @rmtoll TIMINGR SCLDEL LL_I2C_GetDataSetupTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLDEL) >> I2C_TIMINGR_SCLDEL_Pos); +} + +/** + * @brief Configure peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_SetMode\n + * CR1 SMBDEN LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_GetMode\n + * CR1 SMBDEN LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERTEN LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERTEN LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ALERTEN) == (I2C_CR1_ALERTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PECEN) == (I2C_CR1_PECEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB). + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIDLE LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIMEOUTB LL_I2C_ConfigSMBusTimeout + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @param TimeoutB + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode, + uint32_t TimeoutB) +{ + MODIFY_REG(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA | I2C_TIMEOUTR_TIDLE | I2C_TIMEOUTR_TIMEOUTB, + TimeoutA | TimeoutAMode | (TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos)); +} + +/** + * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t TimeoutA) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutA); +} + +/** + * @brief Get the SMBus Clock TimeoutA setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA)); +} + +/** + * @brief Set the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t TimeoutAMode) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutAMode); +} + +/** + * @brief Get the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIDLE)); +} + +/** + * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutB is disabled. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t TimeoutB) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTB) >> I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Enable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + SET_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Disable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + CLEAR_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Check if the SMBus Clock Timeout is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(const I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == \ + (ClockTimeout)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Disable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Check if the TXIS Interrupt is enabled or disabled. + * @rmtoll CR1 TXIE LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXIE) == (I2C_CR1_TXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR1 RXIE LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXIE) == (I2C_CR1_RXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_EnableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Disable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_DisableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ADDR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Check if Address match interrupt is enabled or disabled. + * @rmtoll CR1 ADDRIE LL_I2C_IsEnabledIT_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRIE) == (I2C_CR1_ADDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_EnableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Disable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_DisableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_NACK(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Check if Not acknowledge received interrupt is enabled or disabled. + * @rmtoll CR1 NACKIE LL_I2C_IsEnabledIT_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NACKIE) == (I2C_CR1_NACKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_EnableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Disable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_DisableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_STOP(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Check if STOP detection interrupt is enabled or disabled. + * @rmtoll CR1 STOPIE LL_I2C_IsEnabledIT_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPIE) == (I2C_CR1_STOPIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_EnableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Disable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_DisableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Check if Transfer Complete interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_I2C_IsEnabledIT_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TCIE) == (I2C_CR1_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Disable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR1 ERRIE LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ERRIE) == (I2C_CR1_ERRIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXE) == (I2C_ISR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transmit interrupt flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXIS LL_I2C_IsActiveFlag_TXIS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXIS(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXIS) == (I2C_ISR_TXIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll ISR RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_RXNE) == (I2C_ISR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the received slave address matched with one of the enabled slave address. + * @rmtoll ISR ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ADDR) == (I2C_ISR_ADDR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Not Acknowledge received flag. + * @note RESET: Clear default value. + * SET: When a NACK is received after a byte transmission. + * @rmtoll ISR NACKF LL_I2C_IsActiveFlag_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_NACKF) == (I2C_ISR_NACKF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Stop detection flag. + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll ISR STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_STOPF) == (I2C_ISR_STOPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred. + * @rmtoll ISR TC LL_I2C_IsActiveFlag_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TC) == (I2C_ISR_TC)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=1 and NBYTES date have been transferred. + * @rmtoll ISR TCR LL_I2C_IsActiveFlag_TCR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TCR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TCR) == (I2C_ISR_TCR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll ISR BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BERR) == (I2C_ISR_BERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll ISR ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ARLO) == (I2C_ISR_ARLO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag (slave mode). + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll ISR OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_OVR) == (I2C_ISR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When the received PEC does not match with the PEC register content. + * @rmtoll ISR PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_PECERR) == (I2C_ISR_PECERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When a timeout or extended clock timeout occurs. + * @rmtoll ISR TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TIMEOUT) == (I2C_ISR_TIMEOUT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When SMBus host configuration, SMBus alert enabled and + * a falling edge event occurs on SMBA pin. + * @rmtoll ISR ALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ALERT) == (I2C_ISR_ALERT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll ISR BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BUSY) == (I2C_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Clear Address Matched flag. + * @rmtoll ICR ADDRCF LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ADDRCF); +} + +/** + * @brief Clear Not Acknowledge flag. + * @rmtoll ICR NACKCF LL_I2C_ClearFlag_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_NACKCF); +} + +/** + * @brief Clear Stop detection flag. + * @rmtoll ICR STOPCF LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_STOPCF); +} + +/** + * @brief Clear Transmit data register empty flag (TXE). + * @note This bit can be clear by software in order to flush the transmit data register (TXDR). + * @rmtoll ISR TXE LL_I2C_ClearFlag_TXE + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_TXE(I2C_TypeDef *I2Cx) +{ + WRITE_REG(I2Cx->ISR, I2C_ISR_TXE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll ICR BERRCF LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_BERRCF); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll ICR ARLOCF LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ARLOCF); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll ICR OVRCF LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_OVRCF); +} + +/** + * @brief Clear SMBus PEC error flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_PECCF); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_TIMOUTCF); +} + +/** + * @brief Clear SMBus Alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ALERTCF); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable automatic STOP condition generation (master mode). + * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred. + * This bit has no effect in slave mode or when RELOAD bit is set. + * @rmtoll CR2 AUTOEND LL_I2C_EnableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoEndMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Disable automatic STOP condition generation (master mode). + * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low. + * @rmtoll CR2 AUTOEND LL_I2C_DisableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoEndMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Check if automatic STOP condition is enabled or disabled. + * @rmtoll CR2 AUTOEND LL_I2C_IsEnabledAutoEndMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoEndMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_AUTOEND) == (I2C_CR2_AUTOEND)) ? 1UL : 0UL); +} + +/** + * @brief Enable reload mode (master mode). + * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set. + * @rmtoll CR2 RELOAD LL_I2C_EnableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReloadMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Disable reload mode (master mode). + * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow). + * @rmtoll CR2 RELOAD LL_I2C_DisableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableReloadMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Check if reload mode is enabled or disabled. + * @rmtoll CR2 RELOAD LL_I2C_IsEnabledReloadMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledReloadMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_RELOAD) == (I2C_CR2_RELOAD)) ? 1UL : 0UL); +} + +/** + * @brief Configure the number of bytes for transfer. + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 NBYTES LL_I2C_SetTransferSize + * @param I2Cx I2C Instance. + * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferSize(I2C_TypeDef *I2Cx, uint32_t TransferSize) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NBYTES, TransferSize << I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Get the number of bytes configured for transfer. + * @rmtoll CR2 NBYTES LL_I2C_GetTransferSize + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferSize(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_NBYTES) >> I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code + or next received byte. + * @note Usage in Slave mode only. + * @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR2 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR2 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_STOP); +} + +/** + * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master sends the complete 10bit slave address read sequence : + * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address + in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master only sends the first 7 bits of 10bit address in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_DisableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled. + * @rmtoll CR2 HEAD10R LL_I2C_IsEnabledAuto10BitRead + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAuto10BitRead(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_HEAD10R) != (I2C_CR2_HEAD10R)) ? 1UL : 0UL); +} + +/** + * @brief Configure the transfer direction (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 RD_WRN LL_I2C_SetTransferRequest + * @param I2Cx I2C Instance. + * @param TransferRequest This parameter can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferRequest(I2C_TypeDef *I2Cx, uint32_t TransferRequest) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_RD_WRN, TransferRequest); +} + +/** + * @brief Get the transfer direction requested (master mode). + * @rmtoll CR2 RD_WRN LL_I2C_GetTransferRequest + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferRequest(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_RD_WRN)); +} + +/** + * @brief Configure the slave address for transfer (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 SADD LL_I2C_SetSlaveAddr + * @param I2Cx I2C Instance. + * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSlaveAddr(I2C_TypeDef *I2Cx, uint32_t SlaveAddr) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD, SlaveAddr); +} + +/** + * @brief Get the slave address programmed for transfer. + * @rmtoll CR2 SADD LL_I2C_GetSlaveAddr + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetSlaveAddr(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_SADD)); +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @rmtoll CR2 SADD LL_I2C_HandleTransfer\n + * CR2 ADD10 LL_I2C_HandleTransfer\n + * CR2 RD_WRN LL_I2C_HandleTransfer\n + * CR2 START LL_I2C_HandleTransfer\n + * CR2 STOP LL_I2C_HandleTransfer\n + * CR2 RELOAD LL_I2C_HandleTransfer\n + * CR2 NBYTES LL_I2C_HandleTransfer\n + * CR2 AUTOEND LL_I2C_HandleTransfer\n + * CR2 HEAD10R LL_I2C_HandleTransfer + * @param I2Cx I2C Instance. + * @param SlaveAddr Specifies the slave address to be programmed. + * @param SlaveAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRSLAVE_7BIT + * @arg @ref LL_I2C_ADDRSLAVE_10BIT + * @param TransferSize Specifies the number of bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=255. + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_RELOAD + * @arg @ref LL_I2C_MODE_AUTOEND + * @arg @ref LL_I2C_MODE_SOFTEND + * @arg @ref LL_I2C_MODE_SMBUS_RELOAD + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC + * @param Request This parameter can be one of the following values: + * @arg @ref LL_I2C_GENERATE_NOSTARTSTOP + * @arg @ref LL_I2C_GENERATE_STOP + * @arg @ref LL_I2C_GENERATE_START_READ + * @arg @ref LL_I2C_GENERATE_START_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_WRITE + * @retval None + */ +__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize, + uint32_t TransferSize, uint32_t EndMode, uint32_t Request) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)SlaveAddr & I2C_CR2_SADD) | \ + ((uint32_t)SlaveAddrSize & I2C_CR2_ADD10) | \ + (((uint32_t)TransferSize << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)EndMode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD | + I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R, + tmp); +} + +/** + * @brief Indicate the value of transfer direction (slave mode). + * @note RESET: Write transfer, Slave enters in receiver mode. + * SET: Read transfer, Slave enters in transmitter mode. + * @rmtoll ISR DIR LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_DIR)); +} + +/** + * @brief Return the slave matched address. + * @rmtoll ISR ADDCODE LL_I2C_GetAddressMatchCode + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_ADDCODE) >> I2C_ISR_ADDCODE_Pos << 1); +} + +/** + * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition + or an Address Matched is received. + * This bit has no effect when RELOAD bit is set. + * This bit has no effect in device mode when SBC bit is not set. + * @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_PECBYTE); +} + +/** + * @brief Check if the SMBus Packet Error byte internal comparison is requested or not. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_PECBYTE) == (I2C_CR2_PECBYTE)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll PECR PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC)); +} + +/** + * @brief Read Receive Data register. + * @rmtoll RXDR RXDATA LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(const I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->RXDR, I2C_RXDR_RXDATA)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll TXDR TXDATA LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + WRITE_REG(I2Cx->TXDR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct); +ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 || I2C3 || I2C4 || I2C5 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_I2C_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_lpuart.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_lpuart.h new file mode 100644 index 0000000..fe66bec --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_lpuart.h @@ -0,0 +1,2643 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_lpuart.h + * @author MCD Application Team + * @brief Header file of LPUART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_LPUART_H +#define STM32H7xx_LL_LPUART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (LPUART1) + +/** @defgroup LPUART_LL LPUART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Variables LPUART Private Variables + * @{ + */ +/* Array used to get the LPUART prescaler division decimal values versus @ref LPUART_LL_EC_PRESCALER values */ +static const uint16_t LPUART_PRESCALER_TAB[] = +{ + (uint16_t)1, + (uint16_t)2, + (uint16_t)4, + (uint16_t)6, + (uint16_t)8, + (uint16_t)10, + (uint16_t)12, + (uint16_t)16, + (uint16_t)32, + (uint16_t)64, + (uint16_t)128, + (uint16_t)256 +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Constants LPUART Private Constants + * @{ + */ +/* Defines used in Baud Rate related macros and corresponding register setting computation */ +#define LPUART_LPUARTDIV_FREQ_MUL 256U +#define LPUART_BRR_MASK 0x000FFFFFU +#define LPUART_BRR_MIN_VALUE 0x00000300U +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_Private_Macros LPUART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_ES_INIT LPUART Exported Init structures + * @{ + */ + +/** + * @brief LL LPUART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref LPUART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected LPUART communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref LPUART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref LPUART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref LPUART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetHWFlowCtrl().*/ + +} LL_LPUART_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Constants LPUART Exported Constants + * @{ + */ + +/** @defgroup LPUART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_LPUART_WriteReg function + * @{ + */ +#define LL_LPUART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_LPUART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_LPUART_ICR_NCF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_LPUART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_LPUART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_LPUART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_LPUART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_LPUART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_LPUART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_LPUART_ReadReg function + * @{ + */ +#define LL_LPUART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_LPUART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_LPUART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_LPUART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_LPUART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_LPUART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_LPUART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_LPUART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_LPUART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_LPUART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_LPUART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_LPUART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_LPUART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_LPUART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_LPUART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_LPUART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_LPUART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_LPUART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_LPUART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_LPUART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_LPUART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_LPUART_ReadReg and LL_LPUART_WriteReg functions + * @{ + */ +#define LL_LPUART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_LPUART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty + interrupt enable */ +#define LL_LPUART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_LPUART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO + not full interrupt enable */ +#define LL_LPUART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_LPUART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_LPUART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_LPUART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_LPUART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_LPUART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_LPUART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_LPUART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_LPUART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_LPUART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DIRECTION Direction + * @{ + */ +#define LL_LPUART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_LPUART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_LPUART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_LPUART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_LPUART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_LPUART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_LPUART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_LPUART_WAKEUP_IDLELINE 0x00000000U /*!< LPUART wake up from Mute mode on Idle Line */ +#define LL_LPUART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< LPUART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_LPUART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_LPUART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_LPUART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_LPUART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_LPUART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_LPUART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_LPUART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_LPUART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received + in positive/direct logic. (1=H, 0=L) */ +#define LL_LPUART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received + in negative/inverse logic. (1=L, 0=H). + The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_LPUART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, + following the start bit */ +#define LL_LPUART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, + following the start bit */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_LPUART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_LPUART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_LPUART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_LPUART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested + when there is space in the receive buffer */ +#define LL_LPUART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted + when the nCTS input is asserted (tied to 0)*/ +#define LL_LPUART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_LPUART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_LPUART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_LPUART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_LPUART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_LPUART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_LPUART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_LPUART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Macros LPUART Exported Macros + * @{ + */ + +/** @defgroup LPUART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_LPUART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_LPUART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup LPUART_LL_EM_Exported_Macros_Helper Helper Macros + * @{ + */ + +/** + * @brief Compute LPUARTDIV value according to Peripheral Clock and + * expected Baud Rate (20-bit value of LPUARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for LPUART Instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud Rate value to achieve + * @retval LPUARTDIV value to be used for BRR register filling + */ +#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)\ + ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\ + * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Functions LPUART Exported Functions + * @{ + */ + +/** @defgroup LPUART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief LPUART Enable + * @rmtoll CR1 UE LL_LPUART_Enable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Enable(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief LPUART Disable + * @note When LPUART is disabled, LPUART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the LPUART is kept, but all the status + * flags, in the LPUARTx_ISR are set to their default values. + * @note In order to go into low-power mode without generating errors on the line, + * the TE bit must be reset before and the software must wait + * for the TC bit in the LPUART_ISR to be set before resetting the UE bit. + * The DMA requests are also reset when UE = 0 so the DMA channel must + * be disabled before resetting the UE bit. + * @rmtoll CR1 UE LL_LPUART_Disable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Disable(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if LPUART is enabled + * @rmtoll CR1 UE LL_LPUART_IsEnabled + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabled(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @rmtoll CR1 FIFOEN LL_LPUART_EnableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableFIFO(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @rmtoll CR1 FIFOEN LL_LPUART_DisableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableFIFO(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @rmtoll CR1 FIFOEN LL_LPUART_IsEnabledFIFO + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledFIFO(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_SetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @rmtoll CR3 TXFTCFG LL_LPUART_GetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @rmtoll CR3 RXFTCFG LL_LPUART_SetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @rmtoll CR3 RXFTCFG LL_LPUART_GetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_LPUART_ConfigFIFOsThreshold + * @param LPUARTx LPUART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \ + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief LPUART enabled in STOP Mode + * @note When this function is enabled, LPUART is able to wake up the MCU from Stop mode, provided that + * LPUART clock selection is HSI or LSE in RCC. + * @rmtoll CR1 UESM LL_LPUART_EnableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief LPUART disabled in STOP Mode + * @note When this function is disabled, LPUART is not able to wake up the MCU from Stop mode + * @rmtoll CR1 UESM LL_LPUART_DisableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if LPUART is enabled in STOP Mode + * (able to wake up MCU from Stop mode or not) + * @rmtoll CR1 UESM LL_LPUART_IsEnabledInStopMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledInStopMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_LPUART_EnableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_LPUART_DisableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_LPUART_EnableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_LPUART_DisableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_SetTransferDirection\n + * CR1 TE LL_LPUART_SetTransferDirection + * @param LPUARTx LPUART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferDirection(USART_TypeDef *LPUARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_GetTransferDirection\n + * CR1 TE LL_LPUART_GetTransferDirection + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferDirection(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled) + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_LPUART_SetParity\n + * CR1 PCE LL_LPUART_SetParity + * @param LPUARTx LPUART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetParity(USART_TypeDef *LPUARTx, uint32_t Parity) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_LPUART_GetParity\n + * CR1 PCE LL_LPUART_GetParity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_LPUART_GetParity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_LPUART_SetWakeUpMethod + * @param LPUARTx LPUART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWakeUpMethod(USART_TypeDef *LPUARTx, uint32_t Method) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_LPUART_GetWakeUpMethod + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWakeUpMethod(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_SetDataWidth + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDataWidth(USART_TypeDef *LPUARTx, uint32_t DataWidth) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_GetDataWidth + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDataWidth(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_LPUART_EnableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_LPUART_DisableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_LPUART_IsEnabledMuteMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledMuteMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_SetPrescaler + * @param LPUARTx LPUART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetPrescaler(USART_TypeDef *LPUARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(LPUARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_GetPrescaler + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetPrescaler(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_SetStopBitsLength + * @param LPUARTx LPUART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetStopBitsLength(USART_TypeDef *LPUARTx, uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_GetStopBitsLength + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetStopBitsLength(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_LPUART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_LPUART_SetParity() function + * - Stop bits configuration using @ref LL_LPUART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_LPUART_ConfigCharacter\n + * CR1 PCE LL_LPUART_ConfigCharacter\n + * CR1 M LL_LPUART_ConfigCharacter\n + * CR2 STOP LL_LPUART_ConfigCharacter + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigCharacter(USART_TypeDef *LPUARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_LPUART_SetTXRXSwap + * @param LPUARTx LPUART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXRXSwap(USART_TypeDef *LPUARTx, uint32_t SwapConfig) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_LPUART_GetTXRXSwap + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXRXSwap(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_LPUART_SetRXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_LPUART_GetRXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_LPUART_SetTXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_LPUART_GetTXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_LPUART_SetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBinaryDataLogic(USART_TypeDef *LPUARTx, uint32_t DataLogic) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_LPUART_GetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBinaryDataLogic(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_SetTransferBitOrder + * @param LPUARTx LPUART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferBitOrder(USART_TypeDef *LPUARTx, uint32_t BitOrder) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_GetTransferBitOrder + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferBitOrder(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Set Address of the LPUART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_LPUART_ConfigNodeAddress\n + * CR2 ADDM7 LL_LPUART_ConfigNodeAddress + * @param LPUARTx LPUART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the LPUART node. + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigNodeAddress(USART_TypeDef *LPUARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the LPUART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_LPUART_GetNodeAddress + * @param LPUARTx LPUART Instance + * @retval Address of the LPUART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddress(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_LPUART_GetNodeAddressLen + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddressLen(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_EnableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_DisableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_EnableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_DisableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_SetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_SetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetHWFlowCtrl(USART_TypeDef *LPUARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_GetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_GetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_LPUART_GetHWFlowCtrl(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_EnableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableOverrunDetect(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_DisableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableOverrunDetect(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_LPUART_IsEnabledOverrunDetect + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledOverrunDetect(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_SetWKUPType + * @param LPUARTx LPUART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWKUPType(USART_TypeDef *LPUARTx, uint32_t Type) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_GetWKUPType + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWKUPType(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure LPUART BRR register for achieving expected Baud Rate value. + * + * @note Compute and set LPUARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock and expected Baud Rate values + * @note Peripheral clock and Baud Rate values provided as function parameters should be valid + * (Baud rate value != 0). + * @note Provided that LPUARTx_BRR must be > = 0x300 and LPUART_BRR is 20-bit, + * a care should be taken when generating high baud rates using high PeriphClk + * values. PeriphClk must be in the range [3 x BaudRate, 4096 x BaudRate]. + * @rmtoll BRR BRR LL_LPUART_SetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t BaudRate) +{ + if (BaudRate != 0U) + { + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); + } +} + +/** + * @brief Return current Baud Rate value, according to LPUARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_LPUART_GetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk, + uint32_t PrescalerValue) +{ + uint32_t lpuartdiv; + uint32_t brrresult; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (LPUART_PRESCALER_TAB[(uint16_t)PrescalerValue])); + + lpuartdiv = LPUARTx->BRR & LPUART_BRR_MASK; + + if (lpuartdiv >= LPUART_BRR_MIN_VALUE) + { + brrresult = (uint32_t)(((uint64_t)(periphclkpresc) * LPUART_LPUARTDIV_FREQ_MUL) / lpuartdiv); + } + else + { + brrresult = 0x0UL; + } + + return (brrresult); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_EnableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableHalfDuplex(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_DisableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableHalfDuplex(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @rmtoll CR3 HDSEL LL_LPUART_IsEnabledHalfDuplex + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledHalfDuplex(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEDT LL_LPUART_SetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEDeassertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @rmtoll CR1 DEDT LL_LPUART_GetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : c + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEDeassertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEAT LL_LPUART_SetDEAssertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEAssertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @rmtoll CR1 DEAT LL_LPUART_GetDEAssertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Time Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEAssertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_EnableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDEMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_DisableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDEMode(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @rmtoll CR3 DEM LL_LPUART_IsEnabledDEMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDEMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_SetDESignalPolarity + * @param LPUARTx LPUART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDESignalPolarity(USART_TypeDef *LPUARTx, uint32_t Polarity) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_GetDESignalPolarity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDESignalPolarity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the LPUART Parity Error Flag is set or not + * @rmtoll ISR PE LL_LPUART_IsActiveFlag_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Framing Error Flag is set or not + * @rmtoll ISR FE LL_LPUART_IsActiveFlag_FE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_FE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_LPUART_IsActiveFlag_NE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_NE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_LPUART_IsActiveFlag_ORE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_ORE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_LPUART_IsActiveFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsActiveFlag_RXNE LL_LPUART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Read Data Register or LPUART RX FIFO Not Empty Flag is set or not + * @rmtoll ISR RXNE_RXFNE LL_LPUART_IsActiveFlag_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_LPUART_IsActiveFlag_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsActiveFlag_TXE LL_LPUART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Transmit Data Register Empty or LPUART TX FIFO Not Full Flag is set or not + * @rmtoll ISR TXE_TXFNF LL_LPUART_IsActiveFlag_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS interrupt Flag is set or not + * @rmtoll ISR CTSIF LL_LPUART_IsActiveFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_nCTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Flag is set or not + * @rmtoll ISR CTS LL_LPUART_IsActiveFlag_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Busy Flag is set or not + * @rmtoll ISR BUSY LL_LPUART_IsActiveFlag_BUSY + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_BUSY(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Flag is set or not + * @rmtoll ISR CMF LL_LPUART_IsActiveFlag_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_LPUART_IsActiveFlag_SBK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_SBK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_LPUART_IsActiveFlag_RWU + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RWU(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from stop mode Flag is set or not + * @rmtoll ISR WUF LL_LPUART_IsActiveFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_LPUART_IsActiveFlag_TEACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TEACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_LPUART_IsActiveFlag_REACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_REACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Flag is set or not + * @rmtoll ISR TXFE LL_LPUART_IsActiveFlag_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Flag is set or not + * @rmtoll ISR RXFF LL_LPUART_IsActiveFlag_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Threshold Flag is set or not + * @rmtoll ISR TXFT LL_LPUART_IsActiveFlag_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Threshold Flag is set or not + * @rmtoll ISR RXFT LL_LPUART_IsActiveFlag_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_LPUART_ClearFlag_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_PE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_LPUART_ClearFlag_FE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_FE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise detected Flag + * @rmtoll ICR NECF LL_LPUART_ClearFlag_NE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_NE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_LPUART_ClearFlag_ORE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_ORE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_LPUART_ClearFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_IDLE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_LPUART_ClearFlag_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_TC(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @rmtoll ICR CTSCF LL_LPUART_ClearFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_nCTS(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_LPUART_ClearFlag_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_CM(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @rmtoll ICR WUCF LL_LPUART_ClearFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_WKUP(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_EnableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_LPUART_EnableIT_RXNE LL_LPUART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_EnableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_EnableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#define LL_LPUART_EnableIT_TXE LL_LPUART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_EnableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_EnableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_EnableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_EnableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_EnableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_EnableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_EnableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_EnableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_EnableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_EnableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_DisableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_LPUART_DisableIT_RXNE LL_LPUART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_DisableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_DisableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#define LL_LPUART_DisableIT_TXE LL_LPUART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_DisableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_DisableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_DisableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_DisableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_DisableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_DisableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_DisableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_DisableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_DisableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_DisableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the LPUART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_LPUART_IsEnabledIT_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsEnabledIT_RXNE LL_LPUART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART RX Not Empty and LPUART RX FIFO Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_IsEnabledIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_LPUART_IsEnabledIT_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsEnabledIT_TXE LL_LPUART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART TX Empty and LPUART TX FIFO Not Full Interrupt is enabled or disabled + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_IsEnabledIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_LPUART_IsEnabledIT_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_LPUART_IsEnabledIT_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Interrupt is enabled or disabled + * @rmtoll CR1 TXFEIE LL_LPUART_IsEnabledIT_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Interrupt is enabled or disabled + * @rmtoll CR1 RXFFIE LL_LPUART_IsEnabledIT_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_LPUART_IsEnabledIT_ERROR + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_ERROR(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Interrupt is enabled or disabled. + * @rmtoll CR3 CTSIE LL_LPUART_IsEnabledIT_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @rmtoll CR3 WUFIE LL_LPUART_IsEnabledIT_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART TX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 TXFTIE LL_LPUART_IsEnabledIT_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART RX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 RXFTIE LL_LPUART_IsEnabledIT_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_EnableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_DisableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_LPUART_IsEnabledDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_RX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_EnableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_DisableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_LPUART_IsEnabledDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_TX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_EnableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_DisableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_LPUART_IsEnabledDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the LPUART data register address used for DMA transfer + * @rmtoll RDR RDR LL_LPUART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_LPUART_DMA_GetRegAddr + * @param LPUARTx LPUART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_LPUART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_LPUART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_LPUART_DMA_GetRegAddr(const USART_TypeDef *LPUARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_LPUART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData8 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_LPUART_ReceiveData8(const USART_TypeDef *LPUARTx) +{ + return (uint8_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData9 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_LPUART_ReceiveData9(const USART_TypeDef *LPUARTx) +{ + return (uint16_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData8 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData8(USART_TypeDef *LPUARTx, uint8_t Value) +{ + LPUARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData9 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData9(USART_TypeDef *LPUARTx, uint16_t Value) +{ + LPUARTx->TDR = Value & 0x1FFUL; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_LPUART_RequestBreakSending + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestBreakSending(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put LPUART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_LPUART_RequestEnterMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestEnterMuteMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_LPUART_RequestRxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestRxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_LPUART_DeInit(const USART_TypeDef *LPUARTx); +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, const LL_LPUART_InitTypeDef *LPUART_InitStruct); +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_LPUART_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h new file mode 100644 index 0000000..be137a4 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h @@ -0,0 +1,2301 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_PWR_H +#define STM32H7xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWR_LL_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_LL_WAKEUP_PIN_OFFSET Wake-Up Pins register offsets Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +/* Wake-Up Pins PWR register offsets */ +#define LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET 2UL +#define LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK 0x1FU +/** + * @} + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_FLAG_CPU_CSSF PWR_CPUCR_CSSF /*!< Clear flags for CPU */ +#if defined (DUAL_CORE) +#define LL_PWR_FLAG_CPU2_CSSF PWR_CPU2CR_CSSF /*!< Clear flags for CPU2 */ +#endif /* DUAL_CORE */ +#define LL_PWR_FLAG_WKUPCR_WKUPC6 PWR_WKUPCR_WKUPC6 /*!< Clear PC1 WKUP flag */ +#if defined (PWR_WKUPCR_WKUPC5) +#define LL_PWR_FLAG_WKUPCR_WKUPC5 PWR_WKUPCR_WKUPC5 /*!< Clear PI11 WKUP flag */ +#endif /* defined (PWR_WKUPCR_WKUPC5) */ +#define LL_PWR_FLAG_WKUPCR_WKUPC4 PWR_WKUPCR_WKUPC4 /*!< Clear PC13 WKUP flag */ +#if defined (PWR_WKUPCR_WKUPC3) +#define LL_PWR_FLAG_WKUPCR_WKUPC3 PWR_WKUPCR_WKUPC3 /*!< Clear PI8 WKUP flag */ +#endif /* defined (PWR_WKUPCR_WKUPC3) */ +#define LL_PWR_FLAG_WKUPCR_WKUPC2 PWR_WKUPCR_WKUPC2 /*!< Clear PA2 WKUP flag */ +#define LL_PWR_FLAG_WKUPCR_WKUPC1 PWR_WKUPCR_WKUPC1 /*!< Clear PA0 WKUP flag */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_FLAG_AVDO PWR_CSR1_AVDO /*!< Analog voltage detector output on VDDA flag */ +#define LL_PWR_FLAG_PVDO PWR_CSR1_PVDO /*!< Programmable voltage detect output flag */ +#define LL_PWR_FLAG_ACTVOS PWR_CSR1_ACTVOS /*!< Current VOS applied for VCORE voltage scaling flag */ +#define LL_PWR_FLAG_ACTVOSRDY PWR_CSR1_ACTVOSRDY /*!< Ready bit for current actual used VOS for VCORE voltage scaling flag */ +#if defined (PWR_CSR1_MMCVDO) +#define LL_PWR_FLAG_MMCVDO PWR_CSR1_MMCVDO /*!< Voltage detector output on VDDMMC flag */ +#endif /* PWR_CSR1_MMCVDO */ + +#define LL_PWR_FLAG_TEMPH PWR_CR2_TEMPH /*!< Temperature high threshold flag */ +#define LL_PWR_FLAG_TEMPL PWR_CR2_TEMPL /*!< Temperature low threshold flag */ +#define LL_PWR_FLAG_VBATH PWR_CR2_VBATH /*!< VBAT high threshold flag */ +#define LL_PWR_FLAG_VBATL PWR_CR2_VBATL /*!< VBAT low threshold flag */ +#define LL_PWR_FLAG_BRRDY PWR_CR2_BRRDY /*!< Backup Regulator ready flag */ + +#define LL_PWR_FLAG_USBRDY PWR_CR3_USB33RDY /*!< USB supply ready flag */ +#define LL_PWR_FLAG_SMPSEXTRDY PWR_CR3_SMPSEXTRDY /*!< SMPS External supply ready flag */ + +#if defined (PWR_CPUCR_SBF_D2) +#define LL_PWR_FLAG_CPU_SBF_D2 PWR_CPUCR_SBF_D2 /*!< D2 domain DSTANDBY Flag */ +#endif /* PWR_CPUCR_SBF_D2 */ +#if defined (PWR_CPUCR_SBF_D1) +#define LL_PWR_FLAG_CPU_SBF_D1 PWR_CPUCR_SBF_D1 /*!< D1 domain DSTANDBY Flag */ +#endif /* PWR_CPUCR_SBF_D1 */ +#define LL_PWR_FLAG_CPU_SBF PWR_CPUCR_SBF /*!< System STANDBY Flag */ +#define LL_PWR_FLAG_CPU_STOPF PWR_CPUCR_STOPF /*!< STOP Flag */ +#if defined (DUAL_CORE) +#define LL_PWR_FLAG_CPU_HOLD2F PWR_CPUCR_HOLD2F /*!< CPU2 in hold wakeup flag */ +#endif /* DUAL_CORE */ + +#if defined (DUAL_CORE) +#define LL_PWR_FLAG_CPU2_SBF_D2 PWR_CPU2CR_SBF_D2 /*!< D2 domain DSTANDBY Flag */ +#define LL_PWR_FLAG_CPU2_SBF_D1 PWR_CPU2CR_SBF_D1 /*!< D1 domain DSTANDBY Flag */ +#define LL_PWR_FLAG_CPU2_SBF PWR_CPU2CR_SBF /*!< System STANDBY Flag */ +#define LL_PWR_FLAG_CPU2_STOPF PWR_CPU2CR_STOPF /*!< STOP Flag */ +#define LL_PWR_FLAG_CPU2_HOLD1F PWR_CPU2CR_HOLD1F /*!< CPU1 in hold wakeup flag */ +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_D3CR_VOSRDY PWR_D3CR_VOSRDY /*!< Voltage scaling ready flag */ +#else +#define LL_PWR_SRDCR_VOSRDY PWR_SRDCR_VOSRDY /*!< Voltage scaling ready flag */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +#define LL_PWR_WKUPFR_WKUPF6 PWR_WKUPFR_WKUPF6 /*!< Wakeup flag on PC1 */ +#if defined (PWR_WKUPFR_WKUPF5) +#define LL_PWR_WKUPFR_WKUPF5 PWR_WKUPFR_WKUPF5 /*!< Wakeup flag on PI11 */ +#endif /* defined (PWR_WKUPFR_WKUPF5) */ +#define LL_PWR_WKUPFR_WKUPF4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC13 */ +#if defined (PWR_WKUPFR_WKUPF3) +#define LL_PWR_WKUPFR_WKUPF3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PI8 */ +#endif /* defined (PWR_WKUPFR_WKUPF3) */ +#define LL_PWR_WKUPFR_WKUPF2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */ +#define LL_PWR_WKUPFR_WKUPF1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_MODE_PWR Power mode + * @{ + */ +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_CPU_MODE_D1STOP 0x00000000U /*!< Enter D1 domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_D1STANDBY PWR_CPUCR_PDDS_D1 /*!< Enter D1 domain to Standby mode when the CPU enters deepsleep */ +#else +#define LL_PWR_CPU_MODE_CDSTOP 0x00000000U /*!< Enter CD domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_CDSTOP2 PWR_CPUCR_RETDS_CD /*!< Enter CD domain to Stop2 mode when the CPU enters deepsleep */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_CPU_MODE_D2STOP 0x00000000U /*!< Enter D2 domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_D2STANDBY PWR_CPUCR_PDDS_D2 /*!< Enter D2 domain to Standby mode when the CPU enters deepsleep */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_CPU_MODE_D3RUN PWR_CPUCR_RUN_D3 /*!< Keep system D3 domain in Run mode when the CPU enter deepsleep */ +#define LL_PWR_CPU_MODE_D3STOP 0x00000000U /*!< Enter D3 domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_D3STANDBY PWR_CPUCR_PDDS_D3 /*!< Enter D3 domain to Standby mode when the CPU enters deepsleep */ +#else +#define LL_PWR_CPU_MODE_SRDRUN PWR_CPUCR_RUN_SRD /*!< Keep system SRD domain in Run mode when the CPU enter deepsleep */ +#define LL_PWR_CPU_MODE_SRDSTOP 0x00000000U /*!< Enter SRD domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_SRDSTANDBY PWR_CPUCR_PDDS_SRD /*!< Enter SRD domain to Standby mode when the CPU enters deepsleep */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +#define LL_PWR_CPU2_MODE_D1STOP 0x00000000U /*!< Enter D1 domain to Stop mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D1STANDBY PWR_CPU2CR_PDDS_D1 /*!< Enter D1 domain to Standby mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D2STOP 0x00000000U /*!< Enter D2 domain to Stop mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D2STANDBY PWR_CPU2CR_PDDS_D2 /*!< Enter D2 domain to Standby mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D3RUN PWR_CPU2CR_RUN_D3 /*!< Keep system D3 domain in RUN mode when the CPU2 enter deepsleep */ +#define LL_PWR_CPU2_MODE_D3STOP 0x00000000U /*!< Enter D3 domain to Stop mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D3STANDBY PWR_CPU2CR_PDDS_D3 /*!< Enter D3 domain to Standby mode when the CPU2 enter deepsleep */ +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_VOLTAGE Run mode Regulator Voltage Scaling + * @{ + */ +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_REGU_VOLTAGE_SCALE3 PWR_D3CR_VOS_0 /*!< Select voltage scale 3 */ +#define LL_PWR_REGU_VOLTAGE_SCALE2 PWR_D3CR_VOS_1 /*!< Select voltage scale 2 */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_D3CR_VOS_0 | PWR_D3CR_VOS_1) /*!< Select voltage scale 1 */ +#if defined (SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */ +#define LL_PWR_REGU_VOLTAGE_SCALE0 (PWR_D3CR_VOS_0 | PWR_D3CR_VOS_1) /*!< Select voltage scale 0 */ +#else +#define LL_PWR_REGU_VOLTAGE_SCALE0 0x00000000U /*!< Select voltage scale 0 */ +#endif /* defined (SYSCFG_PWRCR_ODEN) */ +#else +#define LL_PWR_REGU_VOLTAGE_SCALE3 0x00000000U /*!< Select voltage scale 3 */ +#define LL_PWR_REGU_VOLTAGE_SCALE2 PWR_D3CR_VOS_0 /*!< Select voltage scale 2 */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 PWR_D3CR_VOS_1 /*!< Select voltage scale 1 */ +#define LL_PWR_REGU_VOLTAGE_SCALE0 (PWR_D3CR_VOS_0 | PWR_D3CR_VOS_1) /*!< Select voltage scale 0 */ +#endif /* PWR_CPUCR_PDDS_D2 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_STOP_MODE_REGU_VOLTAGE Stop mode Regulator Voltage Scaling + * @{ + */ +#define LL_PWR_REGU_VOLTAGE_SVOS_SCALE5 PWR_CR1_SVOS_0 /*!< Select voltage scale 5 when system enters STOP mode */ +#define LL_PWR_REGU_VOLTAGE_SVOS_SCALE4 PWR_CR1_SVOS_1 /*!< Select voltage scale 4 when system enters STOP mode */ +#define LL_PWR_REGU_VOLTAGE_SVOS_SCALE3 (PWR_CR1_SVOS_0 | PWR_CR1_SVOS_1) /*!< Select voltage scale 3 when system enters STOP mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode + * @{ + */ +#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ +#define LL_PWR_REGU_DSMODE_LOW_POWER PWR_CR1_LPDS /*!< Voltage Regulator in low-power mode during deepsleep mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_PVDLEVEL Power Digital Voltage Level Detector + * @{ + */ +#define LL_PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 /*!< Voltage threshold detected by PVD 1.95 V */ +#define LL_PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 /*!< Voltage threshold detected by PVD 2.1 V */ +#define LL_PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 /*!< Voltage threshold detected by PVD 2.25 V */ +#define LL_PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 /*!< Voltage threshold detected by PVD 2.4 V */ +#define LL_PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 /*!< Voltage threshold detected by PVD 2.55 V */ +#define LL_PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 /*!< Voltage threshold detected by PVD 2.7 V */ +#define LL_PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 /*!< Voltage threshold detected by PVD 2.85 V */ +#define LL_PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7 /*!< External voltage level on PVD_IN pin, compared to internal VREFINT level. */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_AVDLEVEL Power Analog Voltage Level Detector + * @{ + */ +#define LL_PWR_AVDLEVEL_0 PWR_CR1_ALS_LEV0 /*!< Analog Voltage threshold detected by AVD 1.7 V */ +#define LL_PWR_AVDLEVEL_1 PWR_CR1_ALS_LEV1 /*!< Analog Voltage threshold detected by AVD 2.1 V */ +#define LL_PWR_AVDLEVEL_2 PWR_CR1_ALS_LEV2 /*!< Analog Voltage threshold detected by AVD 2.5 V */ +#define LL_PWR_AVDLEVEL_3 PWR_CR1_ALS_LEV3 /*!< Analog Voltage threshold detected by AVD 2.8 V */ + +/** + * @} + */ + +/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR Battery Charge Resistor + * @{ + */ +#define LL_PWR_BATT_CHARG_RESISTOR_5K 0x00000000U /*!< Charge the Battery through a 5 kO resistor */ +#define LL_PWR_BATT_CHARGRESISTOR_1_5K PWR_CR3_VBRS /*!< Charge the Battery through a 1.5 kO resistor */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1 /*!< Wake-Up pin 1 : PA0 */ +#define LL_PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2 /*!< Wake-Up pin 2 : PA2 */ +#if defined (PWR_WKUPEPR_WKUPEN3) +#define LL_PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3 /*!< Wake-Up pin 3 : PI8 */ +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +#define LL_PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4 /*!< Wake-Up pin 4 : PC13 */ +#if defined (PWR_WKUPEPR_WKUPEN5) +#define LL_PWR_WAKEUP_PIN5 PWR_WKUPEPR_WKUPEN5 /*!< Wake-Up pin 5 : PI11 */ +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +#define LL_PWR_WAKEUP_PIN6 PWR_WKUPEPR_WKUPEN6 /*!< Wake-Up pin 6 : PC1 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_WAKEUP_PIN_PULL Wakeup Pins pull configuration + * @{ + */ +#define LL_PWR_WAKEUP_PIN_NOPULL 0x00000000UL /*!< Configure Wake-Up pin in no pull */ +#define LL_PWR_WAKEUP_PIN_PULLUP 0x00000001UL /*!< Configure Wake-Up pin in pull Up */ +#define LL_PWR_WAKEUP_PIN_PULLDOWN 0x00000002UL /*!< Configure Wake-Up pin in pull Down */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_SUPPLY_PWR Power supply source configuration + * @{ + */ +#define LL_PWR_LDO_SUPPLY PWR_CR3_LDOEN /*!< Core domains are supplied from the LDO */ +#if defined (SMPS) +#define LL_PWR_DIRECT_SMPS_SUPPLY PWR_CR3_SMPSEN /*!< Core domains are supplied from the SMPS */ +#define LL_PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */ +#define LL_PWR_SMPS_2V5_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies the LDO which supplies the Core domains */ +#define LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define LL_PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define LL_PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 1.8V output supplies an external source which supplies the Core domains */ +#define LL_PWR_SMPS_2V5_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 2.5V output supplies an external source which supplies the Core domains */ +#endif /* SMPS */ +#define LL_PWR_EXTERNAL_SOURCE_SUPPLY PWR_CR3_BYPASS /*!< The SMPS and the LDO are Bypassed. The Core domains are supplied from an external source */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ + + /** + * @brief Set the voltage Regulator mode during deep sleep mode + * @rmtoll CR1 LPDS LL_PWR_SetRegulModeDS + * @param RegulMode This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_LPDS, RegulMode); +} + +/** + * @brief Get the voltage Regulator mode during deep sleep mode + * @rmtoll CR1 LPDS LL_PWR_GetRegulModeDS + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPDS)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR1 PVDEN LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_PVDEN); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR1 PVDEN LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_PVDEN); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR1 PVDEN LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_PVDEN) == (PWR_CR1_PVDEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector + * @rmtoll CR1 PLS LL_PWR_SetPVDLevel + * @param PVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_PLS, PVDLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR1 PLS LL_PWR_GetPVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_PLS)); +} + +/** + * @brief Enable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Flash Power Down in Stop Mode + * @rmtoll CR1 FLPS LL_PWR_EnableFlashPowerDown + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Disable the Flash Power Down in Stop Mode + * @rmtoll CR1 FLPS LL_PWR_DisableFlashPowerDown + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Check if the Flash Power Down in Stop Mode is enabled + * @rmtoll CR1 FLPS LL_PWR_IsEnabledFlashPowerDown + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FLPS) == (PWR_CR1_FLPS)) ? 1UL : 0UL); +} + +#if defined (PWR_CR1_BOOSTE) +/** + * @brief Enable the Analog Voltage Booster (VDDA) + * @rmtoll CR1 BOOSTE LL_PWR_EnableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAnalogBooster(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Disable the Analog Voltage Booster (VDDA) + * @rmtoll CR1 BOOSTE LL_PWR_DisableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAnalogBooster(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Check if the Analog Voltage Booster (VDDA) is enabled + * @rmtoll CR1 BOOSTE LL_PWR_IsEnabledAnalogBooster + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAnalogBooster(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_BOOSTE) == (PWR_CR1_BOOSTE)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_BOOSTE */ + +#if defined (PWR_CR1_AVD_READY) +/** + * @brief Enable the Analog Voltage Ready to isolate the BOOST IP until VDDA will be ready + * @rmtoll CR1 AVD_READY LL_PWR_EnableAnalogVoltageReady + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAnalogVoltageReady(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AVD_READY); +} + +/** + * @brief Disable the Analog Voltage Ready (VDDA) + * @rmtoll CR1 AVD_READY LL_PWR_DisableAnalogVoltageReady + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAnalogVoltageReady(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AVD_READY); +} + +/** + * @brief Check if the Analog Voltage Booster (VDDA) is enabled + * @rmtoll CR1 AVD_READY LL_PWR_IsEnabledAnalogVoltageReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAnalogVoltageReady(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AVD_READY) == (PWR_CR1_AVD_READY)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AVD_READY */ + +/** + * @brief Set the internal Regulator output voltage in STOP mode + * @rmtoll CR1 SVOS LL_PWR_SetStopModeRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE3 + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE4 + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetStopModeRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_SVOS, VoltageScaling); +} + +/** + * @brief Get the internal Regulator output voltage in STOP mode + * @rmtoll CR1 SVOS LL_PWR_GetStopModeRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE3 + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE4 + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE5 + */ +__STATIC_INLINE uint32_t LL_PWR_GetStopModeRegulVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_SVOS)); +} + +/** + * @brief Enable Analog Power Voltage Detector + * @rmtoll CR1 AVDEN LL_PWR_EnableAVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAVD(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Disable Analog Power Voltage Detector + * @rmtoll CR1 AVDEN LL_PWR_DisableAVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAVD(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Check if Analog Power Voltage Detector is enabled + * @rmtoll CR1 AVDEN LL_PWR_IsEnabledAVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAVD(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AVDEN) == (PWR_CR1_AVDEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the voltage threshold to be detected by the Analog Power Voltage Detector + * @rmtoll CR1 ALS LL_PWR_SetAVDLevel + * @param AVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_AVDLEVEL_0 + * @arg @ref LL_PWR_AVDLEVEL_1 + * @arg @ref LL_PWR_AVDLEVEL_2 + * @arg @ref LL_PWR_AVDLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetAVDLevel(uint32_t AVDLevel) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_ALS, AVDLevel); +} + +/** + * @brief Get the Analog Voltage threshold to be detected by the Analog Power Voltage Detector + * @rmtoll CR1 ALS LL_PWR_GetAVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_AVDLEVEL_0 + * @arg @ref LL_PWR_AVDLEVEL_1 + * @arg @ref LL_PWR_AVDLEVEL_2 + * @arg @ref LL_PWR_AVDLEVEL_3 + */ +__STATIC_INLINE uint32_t LL_PWR_GetAVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_ALS)); +} + +#if defined (PWR_CR1_AXIRAM1SO) +/** + * @brief Enable the AXI RAM1 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM1SO LL_PWR_EnableAXIRAM1ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAXIRAM1ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AXIRAM1SO); +} + +/** + * @brief Disable the AXI RAM1 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM1SO LL_PWR_DisableAXIRAM1ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAXIRAM1ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AXIRAM1SO); +} + +/** + * @brief Check if the AXI RAM1 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AXIRAM1SO LL_PWR_IsEnabledAXIRAM1ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAXIRAM1ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AXIRAM1SO) == (PWR_CR1_AXIRAM1SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AXIRAM1SO */ + +#if defined (PWR_CR1_AXIRAM2SO) +/** + * @brief Enable the AXI RAM2 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM2SO LL_PWR_EnableAXIRAM2ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAXIRAM2ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AXIRAM2SO); +} + +/** + * @brief Disable the AXI RAM2 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM2SO LL_PWR_DisableAXIRAM2ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAXIRAM2ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AXIRAM2SO); +} + +/** + * @brief Check if the AXI RAM2 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AXIRAM2SO LL_PWR_IsEnabledAXIRAM2ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAXIRAM2ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AXIRAM2SO) == (PWR_CR1_AXIRAM2SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AXIRAM2SO */ + +#if defined (PWR_CR1_AXIRAM3SO) +/** + * @brief Enable the AXI RAM3 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM3SO LL_PWR_EnableAXIRAM3ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAXIRAM3ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AXIRAM3SO); +} + +/** + * @brief Disable the AXI RAM3 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM3SO LL_PWR_DisableAXIRAM3ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAXIRAM3ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AXIRAM3SO); +} + +/** + * @brief Check if the AXI RAM3 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AXIRAM3SO LL_PWR_IsEnabledAXIRAM3ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAXIRAM3ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AXIRAM3SO) == (PWR_CR1_AXIRAM3SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AXIRAM3SO */ + +#if defined (PWR_CR1_AHBRAM1SO) +/** + * @brief Enable the AHB RAM1 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AHBRAM1SO LL_PWR_EnableAHBRAM1ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAHBRAM1ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AHBRAM1SO); +} + +/** + * @brief Disable the AHB RAM1 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AHBRAM1SO LL_PWR_DisableAHBRAM1ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAHBRAM1ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AHBRAM1SO); +} + +/** + * @brief Check if the AHB RAM1 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AHBRAM1SO LL_PWR_IsEnabledAHBRAM1ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAHBRAM1ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AHBRAM1SO) == (PWR_CR1_AHBRAM1SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AHBRAM1SO */ + +#if defined (PWR_CR1_AHBRAM2SO) +/** + * @brief Enable the AHB RAM2 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AHBRAM2SO LL_PWR_EnableAHBRAM2ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAHBRAM2ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AHBRAM2SO); +} + +/** + * @brief Disable the AHB RAM2 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AHBRAM2SO LL_PWR_DisableAHBRAM2ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAHBRAM2ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AHBRAM2SO); +} + +/** + * @brief Check if the AHB RAM2 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AHBRAM2SO LL_PWR_IsEnabledAHBRAM2ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAHBRAM2ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AHBRAM2SO) == (PWR_CR1_AHBRAM2SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AHBRAM2SO */ + +#if defined (PWR_CR1_ITCMSO) +/** + * @brief Enable the ITCM shut-off in DStop/DStop2 mode + * @rmtoll CR1 ITCMSO LL_PWR_EnableITCMSOShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableITCMSOShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_ITCMSO); +} + +/** + * @brief Disable the ITCM shut-off in DStop/DStop2 mode + * @rmtoll CR1 ITCMSO LL_PWR_DisableITCMSOShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableITCMSOShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_ITCMSO); +} + +/** + * @brief Check if the ITCM shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 ITCMSO LL_PWR_IsEnabledITCMShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledITCMShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_ITCMSO) == (PWR_CR1_ITCMSO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_ITCMSO */ + +#if defined (PWR_CR1_HSITFSO) +/** + * @brief Enable the USB and FDCAN shut-off in DStop/DStop2 mode + * @rmtoll CR1 HSITFSO LL_PWR_EnableHSITFShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableHSITFShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_HSITFSO); +} + +/** + * @brief Disable the USB and FDCAN shut-off in DStop/DStop2 mode + * @rmtoll CR1 HSITFSO LL_PWR_DisableHSITFShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableHSITFShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_HSITFSO); +} + +/** + * @brief Check if the USB and FDCAN shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 HSITFSO LL_PWR_IsEnabledHSITFShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledHSITFShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_HSITFSO) == (PWR_CR1_HSITFSO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_HSITFSO */ + +#if defined (PWR_CR1_SRDRAMSO) +/** + * @brief Enable the SRD AHB RAM shut-off in DStop/DStop2 mode + * @rmtoll CR1 SRDRAMSO LL_PWR_EnableSRDRAMShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSRDRAMShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_SRDRAMSO); +} + +/** + * @brief Disable the SRD AHB RAM shut-off in DStop/DStop2 mode + * @rmtoll CR1 SRDRAMSO LL_PWR_DisableSRDRAMShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSRDRAMShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_SRDRAMSO); +} + +/** + * @brief Check if the SRD AHB RAM shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 SRDRAMSO LL_PWR_IsEnabledSRDRAMShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRDRAMShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_SRDRAMSO) == (PWR_CR1_SRDRAMSO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_SRDRAMSO */ + +/** + * @brief Enable Backup Regulator + * @rmtoll CR2 BREN LL_PWR_EnableBkUpRegulator + * @note When set, the Backup Regulator (used to maintain backup SRAM content in Standby and + * VBAT modes) is enabled. If BRE is reset, the backup Regulator is switched off. The backup + * SRAM can still be used but its content will be lost in the Standby and VBAT modes. Once set, + * the application must wait that the Backup Regulator Ready flag (BRR) is set to indicate that + * the data written into the RAM will be maintained in the Standby and VBAT modes. + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_BREN); +} + +/** + * @brief Disable Backup Regulator + * @rmtoll CR2 BREN LL_PWR_DisableBkUpRegulator + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_BREN); +} + +/** + * @brief Check if the backup Regulator is enabled + * @rmtoll CR2 BREN LL_PWR_IsEnabledBkUpRegulator + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_BREN) == (PWR_CR2_BREN)) ? 1UL : 0UL); +} + +/** + * @brief Enable VBAT and Temperature monitoring + * @rmtoll CR2 MONEN LL_PWR_EnableMonitoring + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableMonitoring(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_MONEN); +} + +/** + * @brief Disable VBAT and Temperature monitoring + * @rmtoll CR2 MONEN LL_PWR_DisableMonitoring + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableMonitoring(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_MONEN); +} + +/** + * @brief Check if the VBAT and Temperature monitoring is enabled + * @rmtoll CR2 MONEN LL_PWR_IsEnabledMonitoring + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledMonitoring(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_MONEN) == (PWR_CR2_MONEN)) ? 1UL : 0UL); +} + +#if defined (SMPS) +/** + * @brief Configure the PWR supply + * @rmtoll CR3 BYPASS LL_PWR_ConfigSupply + * @rmtoll CR3 LDOEN LL_PWR_ConfigSupply + * @rmtoll CR3 SMPSEN LL_PWR_ConfigSupply + * @rmtoll CR3 SMPSEXTHP LL_PWR_ConfigSupply + * @rmtoll CR3 SMPSLEVEL LL_PWR_ConfigSupply + * @param SupplySource This parameter can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_DIRECT_SMPS_SUPPLY + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_EXT + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + * @retval None + */ +__STATIC_INLINE void LL_PWR_ConfigSupply(uint32_t SupplySource) +{ + /* Set the power supply configuration */ + MODIFY_REG(PWR->CR3, (PWR_CR3_SMPSLEVEL | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS), SupplySource); +} +#else +/** + * @brief Configure the PWR supply + * @rmtoll CR3 BYPASS LL_PWR_ConfigSupply + * @rmtoll CR3 LDOEN LL_PWR_ConfigSupply + * @rmtoll CR3 SCUEN LL_PWR_ConfigSupply + * @param SupplySource This parameter can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + * @retval None + */ +__STATIC_INLINE void LL_PWR_ConfigSupply(uint32_t SupplySource) +{ + /* Set the power supply configuration */ + MODIFY_REG(PWR->CR3, (PWR_CR3_SCUEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS), SupplySource); +} +#endif /* defined (SMPS) */ + +#if defined (SMPS) +/** + * @brief Get the PWR supply + * @rmtoll CR3 BYPASS LL_PWR_GetSupply + * @rmtoll CR3 LDOEN LL_PWR_GetSupply + * @rmtoll CR3 SMPSEN LL_PWR_GetSupply + * @rmtoll CR3 SMPSEXTHP LL_PWR_GetSupply + * @rmtoll CR3 SMPSLEVEL LL_PWR_GetSupply + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_DIRECT_SMPS_SUPPLY + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_EXT + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + */ +__STATIC_INLINE uint32_t LL_PWR_GetSupply(void) +{ + /* Get the power supply configuration */ + return(uint32_t)(READ_BIT(PWR->CR3, (PWR_CR3_SMPSLEVEL | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS))); +} +#else +/** + * @brief Get the PWR supply + * @rmtoll CR3 BYPASS LL_PWR_GetSupply + * @rmtoll CR3 LDOEN LL_PWR_GetSupply + * @rmtoll CR3 SCUEN LL_PWR_GetSupply + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + */ +__STATIC_INLINE uint32_t LL_PWR_GetSupply(void) +{ + /* Get the power supply configuration */ + return(uint32_t)(READ_BIT(PWR->CR3, (PWR_CR3_SCUEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS))); +} +#endif /* defined (SMPS) */ + +/** + * @brief Enable battery charging + * @rmtoll CR3 VBE LL_PWR_EnableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_VBE); +} + +/** + * @brief Disable battery charging + * @rmtoll CR3 VBE LL_PWR_DisableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_VBE); +} + +/** + * @brief Check if battery charging is enabled + * @rmtoll CR3 VBE LL_PWR_IsEnabledBatteryCharging + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_VBE) == (PWR_CR3_VBE)) ? 1UL : 0UL); +} + +/** + * @brief Set the Battery charge resistor impedance + * @rmtoll CR3 VBRS LL_PWR_SetBattChargResistor + * @param Resistor This parameter can be one of the following values: + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor) +{ + MODIFY_REG(PWR->CR3, PWR_CR3_VBRS, Resistor); +} + +/** + * @brief Get the Battery charge resistor impedance + * @rmtoll CR3 VBRS LL_PWR_GetBattChargResistor + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K + */ +__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void) +{ + return (uint32_t)(READ_BIT(PWR->CR3, PWR_CR3_VBRS)); +} + +/** + * @brief Enable the USB regulator + * @rmtoll CR3 USBREGEN LL_PWR_EnableUSBReg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUSBReg(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_USBREGEN); +} + +/** + * @brief Disable the USB regulator + * @rmtoll CR3 USBREGEN LL_PWR_DisableUSBReg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUSBReg(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_USBREGEN); +} + +/** + * @brief Check if the USB regulator is enabled + * @rmtoll CR3 USBREGEN LL_PWR_IsEnabledUSBReg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUSBReg(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_USBREGEN) == (PWR_CR3_USBREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the USB voltage detector + * @rmtoll CR3 USB33DEN LL_PWR_EnableUSBVoltageDetector + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUSBVoltageDetector(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_USB33DEN); +} + +/** + * @brief Disable the USB voltage detector + * @rmtoll CR3 USB33DEN LL_PWR_DisableUSBVoltageDetector + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUSBVoltageDetector(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_USB33DEN); +} + +/** + * @brief Check if the USB voltage detector is enabled + * @rmtoll CR3 USB33DEN LL_PWR_IsEnabledUSBVoltageDetector + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUSBVoltageDetector(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_USB33DEN) == (PWR_CR3_USB33DEN)) ? 1UL : 0UL); +} + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Set the D1 domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D1 LL_PWR_CPU_SetD1PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D1STOP + * @arg @ref LL_PWR_CPU_MODE_D1STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetD1PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_PDDS_D1, PDMode); +} +#else +/** + * @brief Set the CPU domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR RETDS_CD LL_PWR_CPU_SetCDPowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_CDSTOP + * @arg @ref LL_PWR_CPU_MODE_CDSTOP2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetCDPowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_RETDS_CD, PDMode); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Set the D1 domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D1 LL_PWR_CPU2_SetD1PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D1STOP + * @arg @ref LL_PWR_CPU2_MODE_D1STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_SetD1PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPU2CR, PWR_CPU2CR_PDDS_D1, PDMode); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Get the D1 Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D1 LL_PWR_CPU_GetD1PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D1STOP + * @arg @ref LL_PWR_CPU_MODE_D1STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetD1PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_PDDS_D1)); +} +#else +/** + * @brief Get the CD Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR RETDS_CD LL_PWR_CPU_GetCDPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_CDSTOP + * @arg @ref LL_PWR_CPU_MODE_CDSTOP2 + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetCDPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_RETDS_CD)); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Get the D1 Domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D1 LL_PWR_CPU2_GetD1PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D1STOP + * @arg @ref LL_PWR_CPU2_MODE_D1STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_GetD1PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPU2CR, PWR_CPU2CR_PDDS_D1)); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Set the D2 domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D2 LL_PWR_CPU_SetD2PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D2STOP + * @arg @ref LL_PWR_CPU_MODE_D2STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetD2PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_PDDS_D2, PDMode); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Set the D2 domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D2 LL_PWR_CPU2_SetD2PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D2STOP + * @arg @ref LL_PWR_CPU2_MODE_D2STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_SetD2PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPU2CR, PWR_CPU2CR_PDDS_D2, PDMode); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Get the D2 Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D2 LL_PWR_CPU_GetD2PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D2STOP + * @arg @ref LL_PWR_CPU_MODE_D2STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetD2PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_PDDS_D2)); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Get the D2 Domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D2 LL_PWR_CPU2_GetD2PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D2STOP + * @arg @ref LL_PWR_CPU2_MODE_D2STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_GetD2PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPU2CR, PWR_CPU2CR_PDDS_D2)); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Set the D3 domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D3 LL_PWR_CPU_SetD3PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D3STOP + * @arg @ref LL_PWR_CPU_MODE_D3STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetD3PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_PDDS_D3 , PDMode); +} +#else +/** + * @brief Set the SRD domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_SRD LL_PWR_CPU_SetSRDPowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_SRDSTOP + * @arg @ref LL_PWR_CPU_MODE_SRDSTANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetSRDPowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_PDDS_SRD , PDMode); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Set the D3 domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D3 LL_PWR_CPU2_SetD3PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D3STOP + * @arg @ref LL_PWR_CPU2_MODE_D3STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_SetD3PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPU2CR, PWR_CPU2CR_PDDS_D3, PDMode); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Get the D3 Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D3 LL_PWR_CPU_GetD3PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D3STOP + * @arg @ref LL_PWR_CPU_MODE_D3STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetD3PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_PDDS_D3)); +} +#else +/** + * @brief Get the SRD Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_SRD LL_PWR_CPU_GetSRDPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_SRDSTOP + * @arg @ref LL_PWR_CPU_MODE_SRDSTANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetSRDPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_PDDS_SRD)); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Get the D3 Domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D3 LL_PWR_CPU2_GetD3PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D3STOP + * @arg @ref LL_PWR_CPU2_MODE_D3STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_GetD3PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPU2CR, PWR_CPU2CR_PDDS_D3)); +} +#endif /* DUAL_CORE */ + +#if defined (DUAL_CORE) +/** + * @brief Hold the CPU1 and allocated peripherals when exiting from STOP mode + * @rmtoll CPU2CR HOLD1 LL_PWR_HoldCPU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_HoldCPU1(void) +{ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_HOLD1); +} + +/** + * @brief Release the CPU1 and allocated peripherals + * @rmtoll CPU2CR HOLD1 LL_PWR_ReleaseCPU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ReleaseCPU1(void) +{ + CLEAR_BIT(PWR->CPU2CR, PWR_CPU2CR_HOLD1); +} + +/** + * @brief Ckeck if the CPU1 and allocated peripherals are held + * @rmtoll CPU2CR HOLD1 LL_PWR_IsCPU1Held + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsCPU1Held(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_HOLD1) == (PWR_CPU2CR_HOLD1)) ? 1UL : 0UL); +} + +/** + * @brief Hold the CPU2 and allocated peripherals when exiting from STOP mode + * @rmtoll CPUCR HOLD2 LL_PWR_HoldCPU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_HoldCPU2(void) +{ + SET_BIT(PWR->CPUCR, PWR_CPUCR_HOLD2); +} + +/** + * @brief Release the CPU2 and allocated peripherals + * @rmtoll CPUCR HOLD2 LL_PWR_ReleaseCPU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ReleaseCPU2(void) +{ + CLEAR_BIT(PWR->CPUCR, PWR_CPUCR_HOLD2); +} + +/** + * @brief Ckeck if the CPU2 and allocated peripherals are held + * @rmtoll CPUCR HOLD2 LL_PWR_IsCPU2Held + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsCPU2Held(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_HOLD2) == (PWR_CPUCR_HOLD2)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief D3 domain remains in Run mode regardless of CPU subsystem modes + * @rmtoll CPUCR RUN_D3 LL_PWR_CPU_EnableD3RunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_EnableD3RunInLowPowerMode(void) +{ + SET_BIT(PWR->CPUCR, PWR_CPUCR_RUN_D3); +} +#else +/** + * @brief SRD domain remains in Run mode regardless of CPU subsystem modes + * @rmtoll CPUCR RUN_SRD LL_PWR_CPU_EnableSRDRunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_EnableSRDRunInLowPowerMode(void) +{ + SET_BIT(PWR->CPUCR, PWR_CPUCR_RUN_SRD); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief D3 domain remains in Run mode regardless of CPU2 subsystem modes + * @rmtoll CPU2CR RUN_D3 LL_PWR_CPU2_EnableD3RunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_EnableD3RunInLowPowerMode(void) +{ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_RUN_D3); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief D3 domain follows CPU subsystem modes + * @rmtoll CPUCR RUN_D3 LL_PWR_CPU_DisableD3RunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_DisableD3RunInLowPowerMode(void) +{ + CLEAR_BIT(PWR->CPUCR, PWR_CPUCR_RUN_D3); +} +#else +/** + * @brief SRD domain follows CPU subsystem modes + * @rmtoll CPUCR RUN_SRD LL_PWR_CPU_DisableSRDRunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_DisableSRDRunInLowPowerMode(void) +{ + CLEAR_BIT(PWR->CPUCR, PWR_CPUCR_RUN_SRD); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief D3 domain follows CPU2 subsystem modes + * @rmtoll CPU2CR RUN_D3 LL_PWR_CPU2_DisableD3RunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_DisableD3RunInLowPowerMode(void) +{ + CLEAR_BIT(PWR->CPU2CR, PWR_CPU2CR_RUN_D3); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Check if D3 is kept in Run mode when CPU enters low power mode + * @rmtoll CPUCR RUN_D3 LL_PWR_CPU_IsEnabledD3RunInLowPowerMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsEnabledD3RunInLowPowerMode(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_RUN_D3) == (PWR_CPUCR_RUN_D3)) ? 1UL : 0UL); +} +#else +/** + * @brief Check if SRD is kept in Run mode when CPU enters low power mode + * @rmtoll CPUCR RUN_SRD LL_PWR_CPU_IsEnabledSRDRunInLowPowerMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsEnabledSRDRunInLowPowerMode(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_RUN_SRD) == (PWR_CPUCR_RUN_SRD)) ? 1UL : 0UL); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Check if D3 is kept in Run mode when CPU2 enters low power mode + * @rmtoll CPU2CR RUN_D3 LL_PWR_CPU2_IsEnabledD3RunInLowPowerMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsEnabledD3RunInLowPowerMode(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_RUN_D3) == (PWR_CPU2CR_RUN_D3)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @brief Set the main internal Regulator output voltage + * @rmtoll D3CR VOS LL_PWR_SetRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE0 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 + * @note For all H7 lines except STM32H7Axxx and STM32H7Bxxx lines, VOS0 + * is applied when PWR_D3CR_VOS[1:0] = 0b11 and SYSCFG_PWRCR_ODEN = 0b1. + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) +{ +#if defined (PWR_CPUCR_PDDS_D2) + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, VoltageScaling); +#else + MODIFY_REG(PWR->SRDCR, PWR_SRDCR_VOS, VoltageScaling); +#endif /* PWR_CPUCR_PDDS_D2 */ +} + +/** + * @brief Get the main internal Regulator output voltage + * @rmtoll D3CR VOS LL_PWR_GetRegulVoltageScaling + * @note For all H7 lines except STM32H7Axxx and STM32H7Bxxx lines, checking + * VOS0 need the check of PWR_D3CR_VOS[1:0] field and SYSCFG_PWRCR_ODEN bit. + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE0 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) +{ +#if defined (PWR_CPUCR_PDDS_D2) + return (uint32_t)(READ_BIT(PWR->D3CR, PWR_D3CR_VOS)); +#else + return (uint32_t)(READ_BIT(PWR->SRDCR, PWR_SRDCR_VOS)); +#endif /* PWR_CPUCR_PDDS_D2 */ +} + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN5 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN6 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN5 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN6 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN5 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN6 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->WKUPEPR, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin polarity low for the event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP2 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP3 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP4 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP5 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP6 LL_PWR_SetWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + SET_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)); +} + +/** + * @brief Set the Wake-Up pin polarity high for the event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP2 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP3 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP4 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP5 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP6 LL_PWR_SetWakeUpPinPolarityHigh + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)); +} + +/** + * @brief Get the Wake-Up pin polarity for the event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP2 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP3 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP4 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP5 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP6 LL_PWR_IsWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)) == (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin Pull None + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD5 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD6 LL_PWR_SetWakeUpPinPullNone + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullNone(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_NOPULL << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Set the Wake-Up pin Pull Up + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD5 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD6 LL_PWR_SetWakeUpPinPullUp + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullUp(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_PULLUP << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Set the Wake-Up pin Pull Down + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD5 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD6 LL_PWR_SetWakeUpPinPullDown + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullDown(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_PULLDOWN << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Get the Wake-Up pin pull + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD2 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD3 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD4 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD5 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD6 LL_PWR_GetWakeUpPinPull + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN_NOPULL + * @arg @ref LL_PWR_WAKEUP_PIN_PULLUP + * @arg @ref LL_PWR_WAKEUP_PIN_PULLDOWN + */ +__STATIC_INLINE uint32_t LL_PWR_GetWakeUpPinPull(uint32_t WakeUpPin) +{ + uint32_t regValue = READ_BIT(PWR->WKUPEPR, (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); + + return (uint32_t)(regValue >> ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Indicate whether VDD voltage is below the selected PVD threshold + * @rmtoll CSR1 PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_PVDO) == (PWR_CSR1_PVDO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the voltage level is ready for current actual used VOS + * @rmtoll CSR1 ACTVOSRDY LL_PWR_IsActiveFlag_ACTVOS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ACTVOS(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_ACTVOSRDY) == (PWR_CSR1_ACTVOSRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether VDDA voltage is below the selected AVD threshold + * @rmtoll CSR1 AVDO LL_PWR_IsActiveFlag_AVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_AVDO(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_AVDO) == (PWR_CSR1_AVDO)) ? 1UL : 0UL); +} + +#if defined (PWR_CSR1_MMCVDO) +/** + * @brief Indicate whether VDDMMC voltage is below 1V2 + * @rmtoll CSR1 MMCVDO LL_PWR_IsActiveFlag_MMCVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_MMCVDO(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_MMCVDO) == (PWR_CSR1_MMCVDO)) ? 1UL : 0UL); +} +#endif /* PWR_CSR1_MMCVDO */ + +/** + * @brief Get Backup Regulator ready Flag + * @rmtoll CR2 BRRDY LL_PWR_IsActiveFlag_BRR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_BRRDY) == (PWR_CR2_BRRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the VBAT level is above or below low threshold + * @rmtoll CR2 VBATL LL_PWR_IsActiveFlag_VBATL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VBATL(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_VBATL) == (PWR_CR2_VBATL)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the VBAT level is above or below high threshold + * @rmtoll CR2 VBATH LL_PWR_IsActiveFlag_VBATH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VBATH(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_VBATH) == (PWR_CR2_VBATH)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the CPU temperature level is above or below low threshold + * @rmtoll CR2 TEMPL LL_PWR_IsActiveFlag_TEMPL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_TEMPL(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_TEMPL) == (PWR_CR2_TEMPL)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the CPU temperature level is above or below high threshold + * @rmtoll CR2 TEMPH LL_PWR_IsActiveFlag_TEMPH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_TEMPH(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_TEMPH) == (PWR_CR2_TEMPH)) ? 1UL : 0UL); +} + +#if defined (SMPS) +/** + * @brief Indicate whether the SMPS external supply is ready or not + * @rmtoll CR3 SMPSEXTRDY LL_PWR_IsActiveFlag_SMPSEXT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SMPSEXT(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_SMPSEXTRDY) == (PWR_CR3_SMPSEXTRDY)) ? 1UL : 0UL); +} +#endif /* SMPS */ + +/** + * @brief Indicate whether the USB supply is ready or not + * @rmtoll CR3 USBRDY LL_PWR_IsActiveFlag_USB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_USB(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_USB33RDY) == (PWR_CR3_USB33RDY)) ? 1UL : 0UL); +} + +#if defined (DUAL_CORE) +/** + * @brief Get HOLD2 Flag + * @rmtoll CPUCR HOLD2F LL_PWR_IsActiveFlag_HOLD2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_HOLD2(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_HOLD2F) == (PWR_CPUCR_HOLD2F)) ? 1UL : 0UL); +} + +/** + * @brief Get HOLD1 Flag + * @rmtoll CPU2CR HOLD1F LL_PWR_IsActiveFlag_HOLD1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_HOLD1(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_HOLD1F) == (PWR_CPU2CR_HOLD1F)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @brief Get CPU System Stop Flag + * @rmtoll CPUCR STOPF LL_PWR_CPU_IsActiveFlag_STOP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsActiveFlag_STOP(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_STOPF) == (PWR_CPUCR_STOPF)) ? 1UL : 0UL); +} + +#if defined (DUAL_CORE) +/** + * @brief Get CPU2 System Stop Flag + * @rmtoll CPU2CR STOPF LL_PWR_CPU2_IsActiveFlag_STOP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsActiveFlag_STOP(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_STOPF) == (PWR_CPU2CR_STOPF)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @brief Get CPU System Standby Flag + * @rmtoll CPUCR SBF LL_PWR_CPU_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_SBF) == (PWR_CPUCR_SBF)) ? 1UL : 0UL); +} + +#if defined (DUAL_CORE) +/** + * @brief Get CPU2 System Standby Flag + * @rmtoll CPU2CR SBF LL_PWR_CPU2_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_SBF) == (PWR_CPU2CR_SBF)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_SBF_D1) +/** + * @brief Get CPU D1 Domain Standby Flag + * @rmtoll CPUCR SBF_D1 LL_PWR_CPU_IsActiveFlag_SB_D1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsActiveFlag_SB_D1(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_SBF_D1) == (PWR_CPUCR_SBF_D1)) ? 1UL : 0UL); +} +#endif /* PWR_CPUCR_SBF_D1 */ + +#if defined (DUAL_CORE) +/** + * @brief Get CPU2 D1 Domain Standby Flag + * @rmtoll CPU2CR SBF_D1 LL_PWR_CPU2_IsActiveFlag_SB_D1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsActiveFlag_SB_D1(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_SBF_D1) == (PWR_CPU2CR_SBF_D1)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_SBF_D2) +/** + * @brief Get CPU D2 Domain Standby Flag + * @rmtoll CPUCR SBF_D2 LL_PWR_CPU_IsActiveFlag_SB_D2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsActiveFlag_SB_D2(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_SBF_D2) == (PWR_CPUCR_SBF_D2)) ? 1UL : 0UL); +} +#endif /* PWR_CPUCR_SBF_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Get CPU2 D2 Domain Standby Flag + * @rmtoll CPU2CR SBF_D2 LL_PWR_CPU2_IsActiveFlag_SB_D2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsActiveFlag_SB_D2(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_SBF_D2) == (PWR_CPU2CR_SBF_D2)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + + +/** + * @brief Indicate whether the Regulator is ready in the selected voltage range + * or if its output voltage is still changing to the required voltage level + * @rmtoll D3CR VOSRDY LL_PWR_IsActiveFlag_VOS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) +{ +#if defined (PWR_CPUCR_PDDS_D2) + return ((READ_BIT(PWR->D3CR, PWR_D3CR_VOSRDY) == (PWR_D3CR_VOSRDY)) ? 1UL : 0UL); +#else + return ((READ_BIT(PWR->SRDCR, PWR_SRDCR_VOSRDY) == (PWR_SRDCR_VOSRDY)) ? 1UL : 0UL); +#endif /* PWR_CPUCR_PDDS_D2 */ +} + +/** + * @brief Get Wake-up Flag 6 + * @rmtoll WKUPFR WKUPF6 LL_PWR_IsActiveFlag_WU6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU6(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF6) == (PWR_WKUPFR_WKUPF6)) ? 1UL : 0UL); +} + +#if defined (PWR_WKUPFR_WKUPF5) +/** + * @brief Get Wake-up Flag 5 + * @rmtoll WKUPFR WKUPF5 LL_PWR_IsActiveFlag_WU5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF5) == (PWR_WKUPFR_WKUPF5)) ? 1UL : 0UL); +} +#endif /* defined (PWR_WKUPFR_WKUPF5) */ + +/** + * @brief Get Wake-up Flag 4 + * @rmtoll WKUPFR WKUPF4 LL_PWR_IsActiveFlag_WU4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF4) == (PWR_WKUPFR_WKUPF4)) ? 1UL : 0UL); +} + +#if defined (PWR_WKUPFR_WKUPF3) +/** + * @brief Get Wake-up Flag 3 + * @rmtoll WKUPFR WKUPF3 LL_PWR_IsActiveFlag_WU3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF3) == (PWR_WKUPFR_WKUPF3)) ? 1UL : 0UL); +} +#endif /* defined (PWR_WKUPFR_WKUPF3) */ + +/** + * @brief Get Wake-up Flag 2 + * @rmtoll WKUPFR WKUPF2 LL_PWR_IsActiveFlag_WU2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF2) == (PWR_WKUPFR_WKUPF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 1 + * @rmtoll WKUPFR WKUPF1 LL_PWR_IsActiveFlag_WU1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) == (PWR_WKUPFR_WKUPF1)) ? 1UL : 0UL); +} + +/** + * @brief Clear CPU STANDBY, STOP and HOLD flags + * @rmtoll CPUCR CSSF LL_PWR_ClearFlag_CPU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_CPU(void) +{ + SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF); +} + +#if defined (DUAL_CORE) +/** + * @brief Clear CPU2 STANDBY, STOP and HOLD flags + * @rmtoll CPU2CR CSSF LL_PWR_ClearFlag_CPU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_CPU2(void) +{ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_CSSF); +} +#endif /* DUAL_CORE */ + +/** + * @brief Clear Wake-up Flag 6 + * @rmtoll WKUPCR WKUPC6 LL_PWR_ClearFlag_WU6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU6(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC6); +} + +#if defined (PWR_WKUPCR_WKUPC5) +/** + * @brief Clear Wake-up Flag 5 + * @rmtoll WKUPCR WKUPC5 LL_PWR_ClearFlag_WU5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC5); +} +#endif /* defined (PWR_WKUPCR_WKUPC5) */ + +/** + * @brief Clear Wake-up Flag 4 + * @rmtoll WKUPCR WKUPC4 LL_PWR_ClearFlag_WU4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC4); +} + +#if defined (PWR_WKUPCR_WKUPC3) +/** + * @brief Clear Wake-up Flag 3 + * @rmtoll WKUPCR WKUPC3 LL_PWR_ClearFlag_WU3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC3); +} +#endif /* defined (PWR_WKUPCR_WKUPC3) */ + +/** + * @brief Clear Wake-up Flag 2 + * @rmtoll WKUPCR WKUPC2 LL_PWR_ClearFlag_WU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC2); +} + +/** + * @brief Clear Wake-up Flag 1 + * @rmtoll WKUPCR WKUPC1 LL_PWR_ClearFlag_WU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC1); +} + +#if defined (USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* defined (USE_FULL_LL_DRIVER) */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_PWR_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h new file mode 100644 index 0000000..bd700dc --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h @@ -0,0 +1,6404 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_RCC_H +#define STM32H7xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ +extern const uint8_t LL_RCC_PrescTable[16]; + +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +#if !defined(UNUSED) +#define UNUSED(x) ((void)(x)) +#endif + +/* 32 24 16 8 0 + -------------------------------------------------------- + | Mask | ClkSource | Bit | Register | + | | Config | Position | Offset | + --------------------------------------------------------*/ + +#if defined(RCC_VER_2_0) +/* Clock source register offset Vs CDCCIPR register */ +#define CDCCIP 0x0UL +#define CDCCIP1 0x4UL +#define CDCCIP2 0x8UL +#define SRDCCIP 0xCUL +#else +/* Clock source register offset Vs D1CCIPR register */ +#define D1CCIP 0x0UL +#define D2CCIP1 0x4UL +#define D2CCIP2 0x8UL +#define D3CCIP 0xCUL +#endif /* RCC_VER_2_0 */ + +#define LL_RCC_REG_SHIFT 0U +#define LL_RCC_POS_SHIFT 8U +#define LL_RCC_CONFIG_SHIFT 16U +#define LL_RCC_MASK_SHIFT 24U + +#define LL_CLKSOURCE_SHIFT(__CLKSOURCE__) (((__CLKSOURCE__) >> LL_RCC_POS_SHIFT ) & 0x1FUL) + +#define LL_CLKSOURCE_MASK(__CLKSOURCE__) ((((__CLKSOURCE__) >> LL_RCC_MASK_SHIFT ) & 0xFFUL) << LL_CLKSOURCE_SHIFT(__CLKSOURCE__)) + +#define LL_CLKSOURCE_CONFIG(__CLKSOURCE__) ((((__CLKSOURCE__) >> LL_RCC_CONFIG_SHIFT) & 0xFFUL) << LL_CLKSOURCE_SHIFT(__CLKSOURCE__)) + +#define LL_CLKSOURCE_REG(__CLKSOURCE__) (((__CLKSOURCE__) >> LL_RCC_REG_SHIFT ) & 0xFFUL) + +#define LL_CLKSOURCE(__REG__, __MSK__, __POS__, __CLK__) ((uint32_t)((((__MSK__) >> (__POS__)) << LL_RCC_MASK_SHIFT) | \ + (( __POS__ ) << LL_RCC_POS_SHIFT) | \ + (( __REG__ ) << LL_RCC_REG_SHIFT) | \ + (((__CLK__) >> (__POS__)) << LL_RCC_CONFIG_SHIFT))) +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; + uint32_t CPUCLK_Frequency; + uint32_t HCLK_Frequency; + uint32_t PCLK1_Frequency; + uint32_t PCLK2_Frequency; + uint32_t PCLK3_Frequency; + uint32_t PCLK4_Frequency; +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @brief PLL Clocks Frequency Structure + */ +typedef struct +{ + uint32_t PLL_P_Frequency; + uint32_t PLL_Q_Frequency; + uint32_t PLL_R_Frequency; +} LL_PLL_ClocksTypeDef; + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#if defined(RCC_VER_X) || defined(RCC_VER_3_0) +#define HSE_VALUE 25000000U /*!< Value of the HSE oscillator in Hz */ +#else +#define HSE_VALUE 24000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* RCC_VER_X || RCC_VER_3_0 */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 64000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (CSI_VALUE) +#define CSI_VALUE 4000000U /*!< Value of the CSI oscillator in Hz */ +#endif /* CSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ + +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ +#endif /* HSI48_VALUE */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSIDIV HSI oscillator divider + * @{ + */ +#define LL_RCC_HSI_DIV1 RCC_CR_HSIDIV_1 +#define LL_RCC_HSI_DIV2 RCC_CR_HSIDIV_2 +#define LL_RCC_HSI_DIV4 RCC_CR_HSIDIV_4 +#define LL_RCC_HSI_DIV8 RCC_CR_HSIDIV_8 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW (uint32_t)(0x00000000U) +#define LL_RCC_LSEDRIVE_MEDIUMLOW (uint32_t)(RCC_BDCR_LSEDRV_0) +#define LL_RCC_LSEDRIVE_MEDIUMHIGH (uint32_t)(RCC_BDCR_LSEDRV_1) +#define LL_RCC_LSEDRIVE_HIGH (uint32_t)(RCC_BDCR_LSEDRV) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI +#define LL_RCC_SYS_CLKSOURCE_CSI RCC_CFGR_SW_CSI +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE +#define LL_RCC_SYS_CLKSOURCE_PLL1 RCC_CFGR_SW_PLL1 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_CSI RCC_CFGR_SWS_CSI /*!< CSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL1 RCC_CFGR_SWS_PLL1 /*!< PLL1 used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSWAKEUP_CLKSOURCE System wakeup clock source + * @{ + */ +#define LL_RCC_SYSWAKEUP_CLKSOURCE_HSI (uint32_t)(0x00000000U) +#define LL_RCC_SYSWAKEUP_CLKSOURCE_CSI (uint32_t)(RCC_CFGR_STOPWUCK) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_KERWAKEUP_CLKSOURCE Kernel wakeup clock source + * @{ + */ +#define LL_RCC_KERWAKEUP_CLKSOURCE_HSI (uint32_t)(0x00000000U) +#define LL_RCC_KERWAKEUP_CLKSOURCE_CSI (uint32_t)(RCC_CFGR_STOPKERWUCK) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV System prescaler + * @{ + */ +#if defined(RCC_D1CFGR_D1CPRE_DIV1) +#define LL_RCC_SYSCLK_DIV_1 RCC_D1CFGR_D1CPRE_DIV1 +#define LL_RCC_SYSCLK_DIV_2 RCC_D1CFGR_D1CPRE_DIV2 +#define LL_RCC_SYSCLK_DIV_4 RCC_D1CFGR_D1CPRE_DIV4 +#define LL_RCC_SYSCLK_DIV_8 RCC_D1CFGR_D1CPRE_DIV8 +#define LL_RCC_SYSCLK_DIV_16 RCC_D1CFGR_D1CPRE_DIV16 +#define LL_RCC_SYSCLK_DIV_64 RCC_D1CFGR_D1CPRE_DIV64 +#define LL_RCC_SYSCLK_DIV_128 RCC_D1CFGR_D1CPRE_DIV128 +#define LL_RCC_SYSCLK_DIV_256 RCC_D1CFGR_D1CPRE_DIV256 +#define LL_RCC_SYSCLK_DIV_512 RCC_D1CFGR_D1CPRE_DIV512 +#else +#define LL_RCC_SYSCLK_DIV_1 RCC_CDCFGR1_CDCPRE_DIV1 +#define LL_RCC_SYSCLK_DIV_2 RCC_CDCFGR1_CDCPRE_DIV2 +#define LL_RCC_SYSCLK_DIV_4 RCC_CDCFGR1_CDCPRE_DIV4 +#define LL_RCC_SYSCLK_DIV_8 RCC_CDCFGR1_CDCPRE_DIV8 +#define LL_RCC_SYSCLK_DIV_16 RCC_CDCFGR1_CDCPRE_DIV16 +#define LL_RCC_SYSCLK_DIV_64 RCC_CDCFGR1_CDCPRE_DIV64 +#define LL_RCC_SYSCLK_DIV_128 RCC_CDCFGR1_CDCPRE_DIV128 +#define LL_RCC_SYSCLK_DIV_256 RCC_CDCFGR1_CDCPRE_DIV256 +#define LL_RCC_SYSCLK_DIV_512 RCC_CDCFGR1_CDCPRE_DIV512 +#endif /* RCC_D1CFGR_D1CPRE_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_AHB_DIV AHB prescaler + * @{ + */ +#if defined(RCC_D1CFGR_HPRE_DIV1) +#define LL_RCC_AHB_DIV_1 RCC_D1CFGR_HPRE_DIV1 +#define LL_RCC_AHB_DIV_2 RCC_D1CFGR_HPRE_DIV2 +#define LL_RCC_AHB_DIV_4 RCC_D1CFGR_HPRE_DIV4 +#define LL_RCC_AHB_DIV_8 RCC_D1CFGR_HPRE_DIV8 +#define LL_RCC_AHB_DIV_16 RCC_D1CFGR_HPRE_DIV16 +#define LL_RCC_AHB_DIV_64 RCC_D1CFGR_HPRE_DIV64 +#define LL_RCC_AHB_DIV_128 RCC_D1CFGR_HPRE_DIV128 +#define LL_RCC_AHB_DIV_256 RCC_D1CFGR_HPRE_DIV256 +#define LL_RCC_AHB_DIV_512 RCC_D1CFGR_HPRE_DIV512 +#else +#define LL_RCC_AHB_DIV_1 RCC_CDCFGR1_HPRE_DIV1 +#define LL_RCC_AHB_DIV_2 RCC_CDCFGR1_HPRE_DIV2 +#define LL_RCC_AHB_DIV_4 RCC_CDCFGR1_HPRE_DIV4 +#define LL_RCC_AHB_DIV_8 RCC_CDCFGR1_HPRE_DIV8 +#define LL_RCC_AHB_DIV_16 RCC_CDCFGR1_HPRE_DIV16 +#define LL_RCC_AHB_DIV_64 RCC_CDCFGR1_HPRE_DIV64 +#define LL_RCC_AHB_DIV_128 RCC_CDCFGR1_HPRE_DIV128 +#define LL_RCC_AHB_DIV_256 RCC_CDCFGR1_HPRE_DIV256 +#define LL_RCC_AHB_DIV_512 RCC_CDCFGR1_HPRE_DIV512 +#endif /* RCC_D1CFGR_HPRE_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#if defined(RCC_D2CFGR_D2PPRE1_DIV1) +#define LL_RCC_APB1_DIV_1 RCC_D2CFGR_D2PPRE1_DIV1 +#define LL_RCC_APB1_DIV_2 RCC_D2CFGR_D2PPRE1_DIV2 +#define LL_RCC_APB1_DIV_4 RCC_D2CFGR_D2PPRE1_DIV4 +#define LL_RCC_APB1_DIV_8 RCC_D2CFGR_D2PPRE1_DIV8 +#define LL_RCC_APB1_DIV_16 RCC_D2CFGR_D2PPRE1_DIV16 +#else +#define LL_RCC_APB1_DIV_1 RCC_CDCFGR2_CDPPRE1_DIV1 +#define LL_RCC_APB1_DIV_2 RCC_CDCFGR2_CDPPRE1_DIV2 +#define LL_RCC_APB1_DIV_4 RCC_CDCFGR2_CDPPRE1_DIV4 +#define LL_RCC_APB1_DIV_8 RCC_CDCFGR2_CDPPRE1_DIV8 +#define LL_RCC_APB1_DIV_16 RCC_CDCFGR2_CDPPRE1_DIV16 +#endif /* RCC_D2CFGR_D2PPRE1_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB2_DIV APB low-speed prescaler (APB2) + * @{ + */ +#if defined(RCC_D2CFGR_D2PPRE2_DIV1) +#define LL_RCC_APB2_DIV_1 RCC_D2CFGR_D2PPRE2_DIV1 +#define LL_RCC_APB2_DIV_2 RCC_D2CFGR_D2PPRE2_DIV2 +#define LL_RCC_APB2_DIV_4 RCC_D2CFGR_D2PPRE2_DIV4 +#define LL_RCC_APB2_DIV_8 RCC_D2CFGR_D2PPRE2_DIV8 +#define LL_RCC_APB2_DIV_16 RCC_D2CFGR_D2PPRE2_DIV16 +#else +#define LL_RCC_APB2_DIV_1 RCC_CDCFGR2_CDPPRE2_DIV1 +#define LL_RCC_APB2_DIV_2 RCC_CDCFGR2_CDPPRE2_DIV2 +#define LL_RCC_APB2_DIV_4 RCC_CDCFGR2_CDPPRE2_DIV4 +#define LL_RCC_APB2_DIV_8 RCC_CDCFGR2_CDPPRE2_DIV8 +#define LL_RCC_APB2_DIV_16 RCC_CDCFGR2_CDPPRE2_DIV16 +#endif /* RCC_D2CFGR_D2PPRE2_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB3_DIV APB low-speed prescaler (APB3) + * @{ + */ +#if defined(RCC_D1CFGR_D1PPRE_DIV1) +#define LL_RCC_APB3_DIV_1 RCC_D1CFGR_D1PPRE_DIV1 +#define LL_RCC_APB3_DIV_2 RCC_D1CFGR_D1PPRE_DIV2 +#define LL_RCC_APB3_DIV_4 RCC_D1CFGR_D1PPRE_DIV4 +#define LL_RCC_APB3_DIV_8 RCC_D1CFGR_D1PPRE_DIV8 +#define LL_RCC_APB3_DIV_16 RCC_D1CFGR_D1PPRE_DIV16 +#else +#define LL_RCC_APB3_DIV_1 RCC_CDCFGR1_CDPPRE_DIV1 +#define LL_RCC_APB3_DIV_2 RCC_CDCFGR1_CDPPRE_DIV2 +#define LL_RCC_APB3_DIV_4 RCC_CDCFGR1_CDPPRE_DIV4 +#define LL_RCC_APB3_DIV_8 RCC_CDCFGR1_CDPPRE_DIV8 +#define LL_RCC_APB3_DIV_16 RCC_CDCFGR1_CDPPRE_DIV16 +#endif /* RCC_D1CFGR_D1PPRE_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB4_DIV APB low-speed prescaler (APB4) + * @{ + */ +#if defined(RCC_D3CFGR_D3PPRE_DIV1) +#define LL_RCC_APB4_DIV_1 RCC_D3CFGR_D3PPRE_DIV1 +#define LL_RCC_APB4_DIV_2 RCC_D3CFGR_D3PPRE_DIV2 +#define LL_RCC_APB4_DIV_4 RCC_D3CFGR_D3PPRE_DIV4 +#define LL_RCC_APB4_DIV_8 RCC_D3CFGR_D3PPRE_DIV8 +#define LL_RCC_APB4_DIV_16 RCC_D3CFGR_D3PPRE_DIV16 +#else +#define LL_RCC_APB4_DIV_1 RCC_SRDCFGR_SRDPPRE_DIV1 +#define LL_RCC_APB4_DIV_2 RCC_SRDCFGR_SRDPPRE_DIV2 +#define LL_RCC_APB4_DIV_4 RCC_SRDCFGR_SRDPPRE_DIV4 +#define LL_RCC_APB4_DIV_8 RCC_SRDCFGR_SRDPPRE_DIV8 +#define LL_RCC_APB4_DIV_16 RCC_SRDCFGR_SRDPPRE_DIV16 +#endif /* RCC_D3CFGR_D3PPRE_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_HSI (uint32_t)((RCC_CFGR_MCO1>>16U) | 0x00000000U) +#define LL_RCC_MCO1SOURCE_LSE (uint32_t)((RCC_CFGR_MCO1>>16U) | RCC_CFGR_MCO1_0) +#define LL_RCC_MCO1SOURCE_HSE (uint32_t)((RCC_CFGR_MCO1>>16U) | RCC_CFGR_MCO1_1) +#define LL_RCC_MCO1SOURCE_PLL1QCLK (uint32_t)((RCC_CFGR_MCO1>>16U) | RCC_CFGR_MCO1_1|RCC_CFGR_MCO1_0) +#define LL_RCC_MCO1SOURCE_HSI48 (uint32_t)((RCC_CFGR_MCO1>>16U) | RCC_CFGR_MCO1_2) +#define LL_RCC_MCO2SOURCE_SYSCLK (uint32_t)((RCC_CFGR_MCO2>>16U) | 0x00000000U) +#define LL_RCC_MCO2SOURCE_PLL2PCLK (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_0) +#define LL_RCC_MCO2SOURCE_HSE (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_1) +#define LL_RCC_MCO2SOURCE_PLL1PCLK (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_1|RCC_CFGR_MCO2_0) +#define LL_RCC_MCO2SOURCE_CSI (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_2) +#define LL_RCC_MCO2SOURCE_LSI (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_2|RCC_CFGR_MCO2_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0) +#define LL_RCC_MCO1_DIV_2 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1) +#define LL_RCC_MCO1_DIV_3 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1) +#define LL_RCC_MCO1_DIV_4 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_5 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_6 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_7 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_8 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_9 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_10 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_11 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_12 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_13 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_14 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_15 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE) +#define LL_RCC_MCO2_DIV_1 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0) +#define LL_RCC_MCO2_DIV_2 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1) +#define LL_RCC_MCO2_DIV_3 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1) +#define LL_RCC_MCO2_DIV_4 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_5 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_6 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_7 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_8 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_9 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_10 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_11 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_12 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_13 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_14 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_15 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE) + +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock + * @{ + */ +#define LL_RCC_RTC_NOCLOCK (uint32_t)(0x00000000U) +#define LL_RCC_RTC_HSE_DIV_2 (uint32_t)(RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_3 (uint32_t)(RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_4 (uint32_t)(RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_5 (uint32_t)(RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_6 (uint32_t)(RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_7 (uint32_t)(RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_8 (uint32_t)(RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_9 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_10 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_11 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_12 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_13 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_14 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_15 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_16 (uint32_t)(RCC_CFGR_RTCPRE_4) +#define LL_RCC_RTC_HSE_DIV_17 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_18 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_19 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_20 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_21 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_22 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_23 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_24 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_25 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_26 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_27 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_28 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_29 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_30 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_31 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_32 (uint32_t)(RCC_CFGR_RTCPRE_5) +#define LL_RCC_RTC_HSE_DIV_33 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_34 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_35 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_36 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_37 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_38 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_39 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_40 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_41 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_42 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_43 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_44 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_45 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_46 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_47 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_48 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4) +#define LL_RCC_RTC_HSE_DIV_49 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_50 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_51 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_52 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_53 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_54 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_55 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_56 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_57 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_58 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_59 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_60 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_61 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_62 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_63 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_USART16SEL) +#define LL_RCC_USART16_CLKSOURCE_PCLK2 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, 0x00000000U) +#define LL_RCC_USART16_CLKSOURCE_PLL2Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_0) +#define LL_RCC_USART16_CLKSOURCE_PLL3Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_1) +#define LL_RCC_USART16_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_0 | RCC_D2CCIP2R_USART16SEL_1) +#define LL_RCC_USART16_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_2) +#define LL_RCC_USART16_CLKSOURCE_LSE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_0 | RCC_D2CCIP2R_USART16SEL_2) +/* Aliases */ +#define LL_RCC_USART16910_CLKSOURCE_PCLK2 LL_RCC_USART16_CLKSOURCE_PCLK2 +#define LL_RCC_USART16910_CLKSOURCE_PLL2Q LL_RCC_USART16_CLKSOURCE_PLL2Q +#define LL_RCC_USART16910_CLKSOURCE_PLL3Q LL_RCC_USART16_CLKSOURCE_PLL3Q +#define LL_RCC_USART16910_CLKSOURCE_HSI LL_RCC_USART16_CLKSOURCE_HSI +#define LL_RCC_USART16910_CLKSOURCE_CSI LL_RCC_USART16_CLKSOURCE_CSI +#define LL_RCC_USART16910_CLKSOURCE_LSE LL_RCC_USART16_CLKSOURCE_LSE + +#elif defined(RCC_D2CCIP2R_USART16910SEL) +#define LL_RCC_USART16910_CLKSOURCE_PCLK2 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, 0x00000000U) +#define LL_RCC_USART16910_CLKSOURCE_PLL2Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_0) +#define LL_RCC_USART16910_CLKSOURCE_PLL3Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_1) +#define LL_RCC_USART16910_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_0 | RCC_D2CCIP2R_USART16910SEL_1) +#define LL_RCC_USART16910_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_2) +#define LL_RCC_USART16910_CLKSOURCE_LSE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_0 | RCC_D2CCIP2R_USART16910SEL_2) +/* Aliases */ +#define LL_RCC_USART16_CLKSOURCE_PCLK2 LL_RCC_USART16910_CLKSOURCE_PCLK2 +#define LL_RCC_USART16_CLKSOURCE_PLL2Q LL_RCC_USART16910_CLKSOURCE_PLL2Q +#define LL_RCC_USART16_CLKSOURCE_PLL3Q LL_RCC_USART16910_CLKSOURCE_PLL3Q +#define LL_RCC_USART16_CLKSOURCE_HSI LL_RCC_USART16910_CLKSOURCE_HSI +#define LL_RCC_USART16_CLKSOURCE_CSI LL_RCC_USART16910_CLKSOURCE_CSI +#define LL_RCC_USART16_CLKSOURCE_LSE LL_RCC_USART16910_CLKSOURCE_LSE + +#else +#define LL_RCC_USART16910_CLKSOURCE_PCLK2 LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, 0x00000000U) +#define LL_RCC_USART16910_CLKSOURCE_PLL2Q LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_0) +#define LL_RCC_USART16910_CLKSOURCE_PLL3Q LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_1) +#define LL_RCC_USART16910_CLKSOURCE_HSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_0 | RCC_CDCCIP2R_USART16910SEL_1) +#define LL_RCC_USART16910_CLKSOURCE_CSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_2) +#define LL_RCC_USART16910_CLKSOURCE_LSE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_0 | RCC_CDCCIP2R_USART16910SEL_2) +/* Aliases */ +#define LL_RCC_USART16_CLKSOURCE_PCLK2 LL_RCC_USART16910_CLKSOURCE_PCLK2 +#define LL_RCC_USART16_CLKSOURCE_PLL2Q LL_RCC_USART16910_CLKSOURCE_PLL2Q +#define LL_RCC_USART16_CLKSOURCE_PLL3Q LL_RCC_USART16910_CLKSOURCE_PLL3Q +#define LL_RCC_USART16_CLKSOURCE_HSI LL_RCC_USART16910_CLKSOURCE_HSI +#define LL_RCC_USART16_CLKSOURCE_CSI LL_RCC_USART16910_CLKSOURCE_CSI +#define LL_RCC_USART16_CLKSOURCE_LSE LL_RCC_USART16910_CLKSOURCE_LSE +#endif /* RCC_D2CCIP2R_USART16SEL */ +#if defined(RCC_D2CCIP2R_USART28SEL) +#define LL_RCC_USART234578_CLKSOURCE_PCLK1 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, 0x00000000U) +#define LL_RCC_USART234578_CLKSOURCE_PLL2Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_0) +#define LL_RCC_USART234578_CLKSOURCE_PLL3Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_0 | RCC_D2CCIP2R_USART28SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_2) +#define LL_RCC_USART234578_CLKSOURCE_LSE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_0 | RCC_D2CCIP2R_USART28SEL_2) +#else +#define LL_RCC_USART234578_CLKSOURCE_PCLK1 LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, 0x00000000U) +#define LL_RCC_USART234578_CLKSOURCE_PLL2Q LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_0) +#define LL_RCC_USART234578_CLKSOURCE_PLL3Q LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_HSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_0 | RCC_CDCCIP2R_USART234578SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_CSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_2) +#define LL_RCC_USART234578_CLKSOURCE_LSE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_0 | RCC_CDCCIP2R_USART234578SEL_2) +#endif /* RCC_D2CCIP2R_USART28SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPUARTx_CLKSOURCE Peripheral LPUART clock source selection + * @{ + */ +#if defined(RCC_D3CCIPR_LPUART1SEL) +#define LL_RCC_LPUART1_CLKSOURCE_PCLK4 (0x00000000U) +#define LL_RCC_LPUART1_CLKSOURCE_PLL2Q (RCC_D3CCIPR_LPUART1SEL_0) +#define LL_RCC_LPUART1_CLKSOURCE_PLL3Q (RCC_D3CCIPR_LPUART1SEL_1) +#define LL_RCC_LPUART1_CLKSOURCE_HSI (RCC_D3CCIPR_LPUART1SEL_0 | RCC_D3CCIPR_LPUART1SEL_1) +#define LL_RCC_LPUART1_CLKSOURCE_CSI (RCC_D3CCIPR_LPUART1SEL_2) +#define LL_RCC_LPUART1_CLKSOURCE_LSE (RCC_D3CCIPR_LPUART1SEL_0 | RCC_D3CCIPR_LPUART1SEL_2) +#else +#define LL_RCC_LPUART1_CLKSOURCE_PCLK4 (0x00000000U) +#define LL_RCC_LPUART1_CLKSOURCE_PLL2Q (RCC_SRDCCIPR_LPUART1SEL_0) +#define LL_RCC_LPUART1_CLKSOURCE_PLL3Q (RCC_SRDCCIPR_LPUART1SEL_1) +#define LL_RCC_LPUART1_CLKSOURCE_HSI (RCC_SRDCCIPR_LPUART1SEL_0 | RCC_SRDCCIPR_LPUART1SEL_1) +#define LL_RCC_LPUART1_CLKSOURCE_CSI (RCC_SRDCCIPR_LPUART1SEL_2) +#define LL_RCC_LPUART1_CLKSOURCE_LSE (RCC_SRDCCIPR_LPUART1SEL_0 | RCC_SRDCCIPR_LPUART1SEL_2) +#endif /* RCC_D3CCIPR_LPUART1SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#if defined (RCC_D2CCIP2R_I2C123SEL) +#define LL_RCC_I2C123_CLKSOURCE_PCLK1 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, 0x00000000U) +#define LL_RCC_I2C123_CLKSOURCE_PLL3R LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, RCC_D2CCIP2R_I2C123SEL_0) +#define LL_RCC_I2C123_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, RCC_D2CCIP2R_I2C123SEL_1) +#define LL_RCC_I2C123_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, RCC_D2CCIP2R_I2C123SEL_0 | RCC_D2CCIP2R_I2C123SEL_1) +/* Aliases */ +#define LL_RCC_I2C1235_CLKSOURCE_PCLK1 LL_RCC_I2C123_CLKSOURCE_PCLK1 +#define LL_RCC_I2C1235_CLKSOURCE_PLL3R LL_RCC_I2C123_CLKSOURCE_PLL3R +#define LL_RCC_I2C1235_CLKSOURCE_HSI LL_RCC_I2C123_CLKSOURCE_HSI +#define LL_RCC_I2C1235_CLKSOURCE_CSI LL_RCC_I2C123_CLKSOURCE_CSI + +#elif defined (RCC_D2CCIP2R_I2C1235SEL) +#define LL_RCC_I2C1235_CLKSOURCE_PCLK1 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, 0x00000000U) +#define LL_RCC_I2C1235_CLKSOURCE_PLL3R LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, RCC_D2CCIP2R_I2C1235SEL_0) +#define LL_RCC_I2C1235_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, RCC_D2CCIP2R_I2C1235SEL_1) +#define LL_RCC_I2C1235_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, RCC_D2CCIP2R_I2C1235SEL_0 | RCC_D2CCIP2R_I2C1235SEL_1) +/* Aliases */ +#define LL_RCC_I2C123_CLKSOURCE_PCLK1 LL_RCC_I2C1235_CLKSOURCE_PCLK1 +#define LL_RCC_I2C123_CLKSOURCE_PLL3R LL_RCC_I2C1235_CLKSOURCE_PLL3R +#define LL_RCC_I2C123_CLKSOURCE_HSI LL_RCC_I2C1235_CLKSOURCE_HSI +#define LL_RCC_I2C123_CLKSOURCE_CSI LL_RCC_I2C1235_CLKSOURCE_CSI + +#else +#define LL_RCC_I2C123_CLKSOURCE_PCLK1 LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, 0x00000000U) +#define LL_RCC_I2C123_CLKSOURCE_PLL3R LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, RCC_CDCCIP2R_I2C123SEL_0) +#define LL_RCC_I2C123_CLKSOURCE_HSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, RCC_CDCCIP2R_I2C123SEL_1) +#define LL_RCC_I2C123_CLKSOURCE_CSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, RCC_CDCCIP2R_I2C123SEL_0 | RCC_CDCCIP2R_I2C123SEL_1) +#endif /* RCC_D2CCIP2R_I2C123SEL */ +#if defined (RCC_D3CCIPR_I2C4SEL) +#define LL_RCC_I2C4_CLKSOURCE_PCLK4 LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, 0x00000000U) +#define LL_RCC_I2C4_CLKSOURCE_PLL3R LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, RCC_D3CCIPR_I2C4SEL_0) +#define LL_RCC_I2C4_CLKSOURCE_HSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, RCC_D3CCIPR_I2C4SEL_1) +#define LL_RCC_I2C4_CLKSOURCE_CSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, RCC_D3CCIPR_I2C4SEL_0 | RCC_D3CCIPR_I2C4SEL_1) +#else +#define LL_RCC_I2C4_CLKSOURCE_PCLK4 LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, 0x00000000U) +#define LL_RCC_I2C4_CLKSOURCE_PLL3R LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, RCC_SRDCCIPR_I2C4SEL_0) +#define LL_RCC_I2C4_CLKSOURCE_HSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, RCC_SRDCCIPR_I2C4SEL_1) +#define LL_RCC_I2C4_CLKSOURCE_CSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, RCC_SRDCCIPR_I2C4SEL_0 | RCC_SRDCCIPR_I2C4SEL_1) +#endif /* RCC_D3CCIPR_I2C4SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPTIMx_CLKSOURCE Peripheral LPTIM clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL2P LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_0) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL3R LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_0 | RCC_D2CCIP2R_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_2) +#define LL_RCC_LPTIM1_CLKSOURCE_CLKP LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_0 | RCC_D2CCIP2R_LPTIM1SEL_2) +#else +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_0) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL3R LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_0 | RCC_CDCCIP2R_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_2) +#define LL_RCC_LPTIM1_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_0 | RCC_CDCCIP2R_LPTIM1SEL_2) +#endif /* RCC_D2CCIP2R_LPTIM1SEL */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define LL_RCC_LPTIM2_CLKSOURCE_PCLK4 LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM2_CLKSOURCE_PLL2P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_0) +#define LL_RCC_LPTIM2_CLKSOURCE_PLL3R LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_1) +#define LL_RCC_LPTIM2_CLKSOURCE_LSE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_0 | RCC_D3CCIPR_LPTIM2SEL_1) +#define LL_RCC_LPTIM2_CLKSOURCE_LSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_2) +#define LL_RCC_LPTIM2_CLKSOURCE_CLKP LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_0 | RCC_D3CCIPR_LPTIM2SEL_2) +#else +#define LL_RCC_LPTIM2_CLKSOURCE_PCLK4 LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM2_CLKSOURCE_PLL2P LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_0) +#define LL_RCC_LPTIM2_CLKSOURCE_PLL3R LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_1) +#define LL_RCC_LPTIM2_CLKSOURCE_LSE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_0 | RCC_SRDCCIPR_LPTIM2SEL_1) +#define LL_RCC_LPTIM2_CLKSOURCE_LSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_2) +#define LL_RCC_LPTIM2_CLKSOURCE_CLKP LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_0 | RCC_SRDCCIPR_LPTIM2SEL_2) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define LL_RCC_LPTIM345_CLKSOURCE_PCLK4 LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM345_CLKSOURCE_PLL2P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_0) +#define LL_RCC_LPTIM345_CLKSOURCE_PLL3R LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_1) +#define LL_RCC_LPTIM345_CLKSOURCE_LSE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_0 | RCC_D3CCIPR_LPTIM345SEL_1) +#define LL_RCC_LPTIM345_CLKSOURCE_LSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_2) +#define LL_RCC_LPTIM345_CLKSOURCE_CLKP LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_0 | RCC_D3CCIPR_LPTIM345SEL_2) +#else +#define LL_RCC_LPTIM345_CLKSOURCE_PCLK4 LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM345_CLKSOURCE_PLL2P LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_0) +#define LL_RCC_LPTIM345_CLKSOURCE_PLL3R LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_1) +#define LL_RCC_LPTIM345_CLKSOURCE_LSE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_0 | RCC_SRDCCIPR_LPTIM3SEL_1) +#define LL_RCC_LPTIM345_CLKSOURCE_LSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_2) +#define LL_RCC_LPTIM345_CLKSOURCE_CLKP LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_0 | RCC_SRDCCIPR_LPTIM3SEL_2) +/* aliases*/ +#define LL_RCC_LPTIM3_CLKSOURCE_PCLK4 LL_RCC_LPTIM345_CLKSOURCE_PCLK4 +#define LL_RCC_LPTIM3_CLKSOURCE_PLL2P LL_RCC_LPTIM345_CLKSOURCE_PLL2P +#define LL_RCC_LPTIM3_CLKSOURCE_PLL3R LL_RCC_LPTIM345_CLKSOURCE_PLL3R +#define LL_RCC_LPTIM3_CLKSOURCE_LSE LL_RCC_LPTIM345_CLKSOURCE_LSE +#define LL_RCC_LPTIM3_CLKSOURCE_LSI LL_RCC_LPTIM345_CLKSOURCE_LSI +#define LL_RCC_LPTIM3_CLKSOURCE_CLKP LL_RCC_LPTIM345_CLKSOURCE_CLKP +#endif /* RCC_D3CCIPR_LPTIM345SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define LL_RCC_SAI1_CLKSOURCE_PLL1Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, 0x00000000U) +#define LL_RCC_SAI1_CLKSOURCE_PLL2P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, RCC_D2CCIP1R_SAI1SEL_0) +#define LL_RCC_SAI1_CLKSOURCE_PLL3P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, RCC_D2CCIP1R_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, RCC_D2CCIP1R_SAI1SEL_0 | RCC_D2CCIP1R_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_CLKP LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, RCC_D2CCIP1R_SAI1SEL_2) +#else +#define LL_RCC_SAI1_CLKSOURCE_PLL1Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, 0x00000000U) +#define LL_RCC_SAI1_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, RCC_CDCCIP1R_SAI1SEL_0) +#define LL_RCC_SAI1_CLKSOURCE_PLL3P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, RCC_CDCCIP1R_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, RCC_CDCCIP1R_SAI1SEL_0 | RCC_CDCCIP1R_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, RCC_CDCCIP1R_SAI1SEL_2) +#endif +#if defined(SAI3) +#define LL_RCC_SAI23_CLKSOURCE_PLL1Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, 0x00000000U) +#define LL_RCC_SAI23_CLKSOURCE_PLL2P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, RCC_D2CCIP1R_SAI23SEL_0) +#define LL_RCC_SAI23_CLKSOURCE_PLL3P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, RCC_D2CCIP1R_SAI23SEL_1) +#define LL_RCC_SAI23_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, RCC_D2CCIP1R_SAI23SEL_0 | RCC_D2CCIP1R_SAI23SEL_1) +#define LL_RCC_SAI23_CLKSOURCE_CLKP LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, RCC_D2CCIP1R_SAI23SEL_2) +#endif /* SAI3 */ +#if defined(RCC_CDCCIP1R_SAI2ASEL) +#define LL_RCC_SAI2A_CLKSOURCE_PLL1Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, 0x00000000U) +#define LL_RCC_SAI2A_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_0) +#define LL_RCC_SAI2A_CLKSOURCE_PLL3P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_1) +#define LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_0 | RCC_CDCCIP1R_SAI2ASEL_1) +#define LL_RCC_SAI2A_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_2) +#define LL_RCC_SAI2A_CLKSOURCE_SPDIF LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_0 | RCC_CDCCIP1R_SAI2ASEL_2) +#endif /* RCC_CDCCIP1R_SAI2ASEL */ +#if defined(RCC_CDCCIP1R_SAI2BSEL) +#define LL_RCC_SAI2B_CLKSOURCE_PLL1Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, 0x00000000U) +#define LL_RCC_SAI2B_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_0) +#define LL_RCC_SAI2B_CLKSOURCE_PLL3P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_1) +#define LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_0 | RCC_CDCCIP1R_SAI2BSEL_1) +#define LL_RCC_SAI2B_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_2) +#define LL_RCC_SAI2B_CLKSOURCE_SPDIF LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_0 | RCC_CDCCIP1R_SAI2BSEL_2) +#endif /* RCC_CDCCIP1R_SAI2BSEL */ +#if defined(SAI4_Block_A) +#define LL_RCC_SAI4A_CLKSOURCE_PLL1Q LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, 0x00000000U) +#define LL_RCC_SAI4A_CLKSOURCE_PLL2P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_0) +#define LL_RCC_SAI4A_CLKSOURCE_PLL3P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_1) +#define LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_0 | RCC_D3CCIPR_SAI4ASEL_1) +#define LL_RCC_SAI4A_CLKSOURCE_CLKP LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_2) +#if defined(RCC_VER_3_0) +#define LL_RCC_SAI4A_CLKSOURCE_SPDIF LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_2 | RCC_D3CCIPR_SAI4ASEL_0) +#endif /* RCC_VER_3_0 */ +#endif /* SAI4_Block_A */ +#if defined(SAI4_Block_B) +#define LL_RCC_SAI4B_CLKSOURCE_PLL1Q LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, 0x00000000U) +#define LL_RCC_SAI4B_CLKSOURCE_PLL2P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_0) +#define LL_RCC_SAI4B_CLKSOURCE_PLL3P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_1) +#define LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_0 | RCC_D3CCIPR_SAI4BSEL_1) +#define LL_RCC_SAI4B_CLKSOURCE_CLKP LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_2) +#if defined(RCC_VER_3_0) +#define LL_RCC_SAI4B_CLKSOURCE_SPDIF LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_2 | RCC_D3CCIPR_SAI4BSEL_0) +#endif /* RCC_VER_3_0 */ +#endif /* SAI4_Block_B */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SDMMC_CLKSOURCE Peripheral SDMMC clock source selection + * @{ + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define LL_RCC_SDMMC_CLKSOURCE_PLL1Q (0x00000000U) +#define LL_RCC_SDMMC_CLKSOURCE_PLL2R (RCC_D1CCIPR_SDMMCSEL) +#else +#define LL_RCC_SDMMC_CLKSOURCE_PLL1Q (0x00000000U) +#define LL_RCC_SDMMC_CLKSOURCE_PLL2R (RCC_CDCCIPR_SDMMCSEL) +#endif /* RCC_D1CCIPR_SDMMCSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_RNGSEL) +#define LL_RCC_RNG_CLKSOURCE_HSI48 (0x00000000U) +#define LL_RCC_RNG_CLKSOURCE_PLL1Q (RCC_D2CCIP2R_RNGSEL_0) +#define LL_RCC_RNG_CLKSOURCE_LSE (RCC_D2CCIP2R_RNGSEL_1) +#define LL_RCC_RNG_CLKSOURCE_LSI (RCC_D2CCIP2R_RNGSEL_1 | RCC_D2CCIP2R_RNGSEL_0) +#else +#define LL_RCC_RNG_CLKSOURCE_HSI48 (0x00000000U) +#define LL_RCC_RNG_CLKSOURCE_PLL1Q (RCC_CDCCIP2R_RNGSEL_0) +#define LL_RCC_RNG_CLKSOURCE_LSE (RCC_CDCCIP2R_RNGSEL_1) +#define LL_RCC_RNG_CLKSOURCE_LSI (RCC_CDCCIP2R_RNGSEL_1 | RCC_CDCCIP2R_RNGSEL_0) +#endif /* RCC_D2CCIP2R_RNGSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_USBSEL) +#define LL_RCC_USB_CLKSOURCE_DISABLE (0x00000000U) +#define LL_RCC_USB_CLKSOURCE_PLL1Q (RCC_D2CCIP2R_USBSEL_0) +#define LL_RCC_USB_CLKSOURCE_PLL3Q (RCC_D2CCIP2R_USBSEL_1) +#define LL_RCC_USB_CLKSOURCE_HSI48 (RCC_D2CCIP2R_USBSEL_1 | RCC_D2CCIP2R_USBSEL_0) +#else +#define LL_RCC_USB_CLKSOURCE_DISABLE (0x00000000U) +#define LL_RCC_USB_CLKSOURCE_PLL1Q (RCC_CDCCIP2R_USBSEL_0) +#define LL_RCC_USB_CLKSOURCE_PLL3Q (RCC_CDCCIP2R_USBSEL_1) +#define LL_RCC_USB_CLKSOURCE_HSI48 (RCC_CDCCIP2R_USBSEL_1 | RCC_CDCCIP2R_USBSEL_0) +#endif /* RCC_D2CCIP2R_USBSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_CECSEL) +#define LL_RCC_CEC_CLKSOURCE_LSE (0x00000000U) +#define LL_RCC_CEC_CLKSOURCE_LSI (RCC_D2CCIP2R_CECSEL_0) +#define LL_RCC_CEC_CLKSOURCE_CSI_DIV122 (RCC_D2CCIP2R_CECSEL_1) +#else +#define LL_RCC_CEC_CLKSOURCE_LSE (0x00000000U) +#define LL_RCC_CEC_CLKSOURCE_LSI (RCC_CDCCIP2R_CECSEL_0) +#define LL_RCC_CEC_CLKSOURCE_CSI_DIV122 (RCC_CDCCIP2R_CECSEL_1) +#endif +/** + * @} + */ + +#if defined(DSI) +/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection + * @{ + */ +#define LL_RCC_DSI_CLKSOURCE_PHY (0x00000000U) +#define LL_RCC_DSI_CLKSOURCE_PLL2Q (RCC_D1CCIPR_DSISEL) +/** + * @} + */ +#endif /* DSI */ + +/** @defgroup RCC_LL_EC_DFSDM_CLKSOURCE Peripheral DFSDM clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) +#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 (0x00000000U) +#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK (RCC_D2CCIP1R_DFSDM1SEL) +#else +#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 (0x00000000U) +#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK (RCC_CDCCIP1R_DFSDM1SEL) +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ +/** + * @} + */ + +#if defined(DFSDM2_BASE) +/** @defgroup RCC_LL_EC_DFSDM2_CLKSOURCE Peripheral DFSDM2 clock source selection + * @{ + */ +#define LL_RCC_DFSDM2_CLKSOURCE_PCLK4 (0x00000000U) +#define LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (RCC_SRDCCIPR_DFSDM2SEL) +/** + * @} + */ +#endif /* DFSDM2_BASE */ + +/** @defgroup RCC_LL_EC_FMC_CLKSOURCE Peripheral FMC clock source selection + * @{ + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define LL_RCC_FMC_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_FMC_CLKSOURCE_PLL1Q (RCC_D1CCIPR_FMCSEL_0) +#define LL_RCC_FMC_CLKSOURCE_PLL2R (RCC_D1CCIPR_FMCSEL_1) +#define LL_RCC_FMC_CLKSOURCE_CLKP (RCC_D1CCIPR_FMCSEL_0 | RCC_D1CCIPR_FMCSEL_1) +#else +#define LL_RCC_FMC_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_FMC_CLKSOURCE_PLL1Q (RCC_CDCCIPR_FMCSEL_0) +#define LL_RCC_FMC_CLKSOURCE_PLL2R (RCC_CDCCIPR_FMCSEL_1) +#define LL_RCC_FMC_CLKSOURCE_CLKP (RCC_CDCCIPR_FMCSEL_0 | RCC_CDCCIPR_FMCSEL_1) +#endif /* RCC_D1CCIPR_FMCSEL */ +/** + * @} + */ + +#if defined(QUADSPI) +/** @defgroup RCC_LL_EC_QSPI_CLKSOURCE Peripheral QSPI clock source selection + * @{ + */ +#define LL_RCC_QSPI_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_QSPI_CLKSOURCE_PLL1Q (RCC_D1CCIPR_QSPISEL_0) +#define LL_RCC_QSPI_CLKSOURCE_PLL2R (RCC_D1CCIPR_QSPISEL_1) +#define LL_RCC_QSPI_CLKSOURCE_CLKP (RCC_D1CCIPR_QSPISEL_0 | RCC_D1CCIPR_QSPISEL_1) +/** + * @} + */ +#endif /* QUADSPI */ + + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @defgroup RCC_LL_EC_OSPI_CLKSOURCE Peripheral OSPI clock source selection + * @{ + */ +#if defined(RCC_D1CCIPR_OCTOSPISEL) +#define LL_RCC_OSPI_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_OSPI_CLKSOURCE_PLL1Q (RCC_D1CCIPR_OCTOSPISEL_0) +#define LL_RCC_OSPI_CLKSOURCE_PLL2R (RCC_D1CCIPR_OCTOSPISEL_1) +#define LL_RCC_OSPI_CLKSOURCE_CLKP (RCC_D1CCIPR_OCTOSPISEL_0 | RCC_D1CCIPR_OCTOSPISEL_1) +#else +#define LL_RCC_OSPI_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_OSPI_CLKSOURCE_PLL1Q (RCC_CDCCIPR_OCTOSPISEL_0) +#define LL_RCC_OSPI_CLKSOURCE_PLL2R (RCC_CDCCIPR_OCTOSPISEL_1) +#define LL_RCC_OSPI_CLKSOURCE_CLKP (RCC_CDCCIPR_OCTOSPISEL_0 | RCC_CDCCIPR_OCTOSPISEL_1) +#endif /* RCC_D1CCIPR_OCTOSPISEL */ +/** + * @} + */ +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ + + +/** @defgroup RCC_LL_EC_CLKP_CLKSOURCE Peripheral CLKP clock source selection + * @{ + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define LL_RCC_CLKP_CLKSOURCE_HSI (0x00000000U) +#define LL_RCC_CLKP_CLKSOURCE_CSI (RCC_D1CCIPR_CKPERSEL_0) +#define LL_RCC_CLKP_CLKSOURCE_HSE (RCC_D1CCIPR_CKPERSEL_1) +#else +#define LL_RCC_CLKP_CLKSOURCE_HSI (0x00000000U) +#define LL_RCC_CLKP_CLKSOURCE_CSI (RCC_CDCCIPR_CKPERSEL_0) +#define LL_RCC_CLKP_CLKSOURCE_HSE (RCC_CDCCIPR_CKPERSEL_1) +#endif /* RCC_D1CCIPR_CKPERSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPIx_CLKSOURCE Peripheral SPI clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define LL_RCC_SPI123_CLKSOURCE_PLL1Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, 0x00000000U) +#define LL_RCC_SPI123_CLKSOURCE_PLL2P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, RCC_D2CCIP1R_SPI123SEL_0) +#define LL_RCC_SPI123_CLKSOURCE_PLL3P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, RCC_D2CCIP1R_SPI123SEL_1) +#define LL_RCC_SPI123_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, RCC_D2CCIP1R_SPI123SEL_0 | RCC_D2CCIP1R_SPI123SEL_1) +#define LL_RCC_SPI123_CLKSOURCE_CLKP LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, RCC_D2CCIP1R_SPI123SEL_2) +#else +#define LL_RCC_SPI123_CLKSOURCE_PLL1Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, 0x00000000U) +#define LL_RCC_SPI123_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, RCC_CDCCIP1R_SPI123SEL_0) +#define LL_RCC_SPI123_CLKSOURCE_PLL3P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, RCC_CDCCIP1R_SPI123SEL_1) +#define LL_RCC_SPI123_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, RCC_CDCCIP1R_SPI123SEL_0 | RCC_CDCCIP1R_SPI123SEL_1) +#define LL_RCC_SPI123_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, RCC_CDCCIP1R_SPI123SEL_2) +#endif /* RCC_D2CCIP1R_SPI123SEL */ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define LL_RCC_SPI45_CLKSOURCE_PCLK2 LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, 0x00000000U) +#define LL_RCC_SPI45_CLKSOURCE_PLL2Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_0) +#define LL_RCC_SPI45_CLKSOURCE_PLL3Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_0 | RCC_D2CCIP1R_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_2) +#define LL_RCC_SPI45_CLKSOURCE_HSE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_0 | RCC_D2CCIP1R_SPI45SEL_2) +#else +#define LL_RCC_SPI45_CLKSOURCE_PCLK2 LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, 0x00000000U) +#define LL_RCC_SPI45_CLKSOURCE_PLL2Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_0) +#define LL_RCC_SPI45_CLKSOURCE_PLL3Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_HSI LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_0 | RCC_CDCCIP1R_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_CSI LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_2) +#define LL_RCC_SPI45_CLKSOURCE_HSE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_0 | RCC_CDCCIP1R_SPI45SEL_2) +#endif /* (RCC_D2CCIP1R_SPI45SEL */ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define LL_RCC_SPI6_CLKSOURCE_PCLK4 LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, 0x00000000U) +#define LL_RCC_SPI6_CLKSOURCE_PLL2Q LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_0) +#define LL_RCC_SPI6_CLKSOURCE_PLL3Q LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_HSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_0 | RCC_D3CCIPR_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_CSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_2) +#define LL_RCC_SPI6_CLKSOURCE_HSE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_0 | RCC_D3CCIPR_SPI6SEL_2) +#else +#define LL_RCC_SPI6_CLKSOURCE_PCLK4 LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, 0x00000000U) +#define LL_RCC_SPI6_CLKSOURCE_PLL2Q LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_0) +#define LL_RCC_SPI6_CLKSOURCE_PLL3Q LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_HSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_0 | RCC_SRDCCIPR_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_CSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_2) +#define LL_RCC_SPI6_CLKSOURCE_HSE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_0 | RCC_SRDCCIPR_SPI6SEL_2) +#define LL_RCC_SPI6_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_1 | RCC_SRDCCIPR_SPI6SEL_2) +#endif /* RCC_D3CCIPR_SPI6SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPDIF_CLKSOURCE Peripheral SPDIF clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define LL_RCC_SPDIF_CLKSOURCE_PLL1Q (0x00000000U) +#define LL_RCC_SPDIF_CLKSOURCE_PLL2R (RCC_D2CCIP1R_SPDIFSEL_0) +#define LL_RCC_SPDIF_CLKSOURCE_PLL3R (RCC_D2CCIP1R_SPDIFSEL_1) +#define LL_RCC_SPDIF_CLKSOURCE_HSI (RCC_D2CCIP1R_SPDIFSEL_0 | RCC_D2CCIP1R_SPDIFSEL_1) +#else +#define LL_RCC_SPDIF_CLKSOURCE_PLL1Q (0x00000000U) +#define LL_RCC_SPDIF_CLKSOURCE_PLL2R (RCC_CDCCIP1R_SPDIFSEL_0) +#define LL_RCC_SPDIF_CLKSOURCE_PLL3R (RCC_CDCCIP1R_SPDIFSEL_1) +#define LL_RCC_SPDIF_CLKSOURCE_HSI (RCC_CDCCIP1R_SPDIFSEL_0 | RCC_CDCCIP1R_SPDIFSEL_1) +#endif /* RCC_D2CCIP1R_SPDIFSEL */ +/** + * @} + */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN_CLKSOURCE Peripheral FDCAN clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define LL_RCC_FDCAN_CLKSOURCE_HSE (0x00000000U) +#define LL_RCC_FDCAN_CLKSOURCE_PLL1Q (RCC_D2CCIP1R_FDCANSEL_0) +#define LL_RCC_FDCAN_CLKSOURCE_PLL2Q (RCC_D2CCIP1R_FDCANSEL_1) +#else +#define LL_RCC_FDCAN_CLKSOURCE_HSE (0x00000000U) +#define LL_RCC_FDCAN_CLKSOURCE_PLL1Q (RCC_CDCCIP1R_FDCANSEL_0) +#define LL_RCC_FDCAN_CLKSOURCE_PLL2Q (RCC_CDCCIP1R_FDCANSEL_1) +#endif /* RCC_D2CCIP1R_FDCANSEL */ +/** + * @} + */ +#endif /*FDCAN1 || FDCAN2*/ + +/** @defgroup RCC_LL_EC_SWP_CLKSOURCE Peripheral SWP clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define LL_RCC_SWP_CLKSOURCE_PCLK1 (0x00000000U) +#define LL_RCC_SWP_CLKSOURCE_HSI (RCC_D2CCIP1R_SWPSEL) +#else +#define LL_RCC_SWP_CLKSOURCE_PCLK1 (0x00000000U) +#define LL_RCC_SWP_CLKSOURCE_HSI (RCC_CDCCIP1R_SWPSEL) +#endif /* RCC_D2CCIP1R_SWPSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection + * @{ + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define LL_RCC_ADC_CLKSOURCE_PLL2P (0x00000000U) +#define LL_RCC_ADC_CLKSOURCE_PLL3R (RCC_D3CCIPR_ADCSEL_0) +#define LL_RCC_ADC_CLKSOURCE_CLKP (RCC_D3CCIPR_ADCSEL_1) +#else +#define LL_RCC_ADC_CLKSOURCE_PLL2P (0x00000000U) +#define LL_RCC_ADC_CLKSOURCE_PLL3R (RCC_SRDCCIPR_ADCSEL_0) +#define LL_RCC_ADC_CLKSOURCE_CLKP (RCC_SRDCCIPR_ADCSEL_1) +#endif /* RCC_D3CCIPR_ADCSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx Peripheral USART get clock source + * @{ + */ +#if defined (RCC_D2CCIP2R_USART16SEL) +#define LL_RCC_USART16_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, 0x00000000U) +#elif defined (RCC_D2CCIP2R_USART16910SEL) +#define LL_RCC_USART16_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, 0x00000000U) +/* alias*/ +#define LL_RCC_USART16910_CLKSOURCE LL_RCC_USART16_CLKSOURCE +#else +#define LL_RCC_USART16_CLKSOURCE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, 0x00000000U) +/* alias*/ +#define LL_RCC_USART16910_CLKSOURCE LL_RCC_USART16_CLKSOURCE +#endif /* RCC_D2CCIP2R_USART16SEL */ +#if defined (RCC_D2CCIP2R_USART28SEL) +#define LL_RCC_USART234578_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, 0x00000000U) +#else +#define LL_RCC_USART234578_CLKSOURCE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP2R_USART28SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPUARTx Peripheral LPUART get clock source + * @{ + */ +#if defined(RCC_D3CCIPR_LPUART1SEL) +#define LL_RCC_LPUART1_CLKSOURCE RCC_D3CCIPR_LPUART1SEL +#else +#define LL_RCC_LPUART1_CLKSOURCE RCC_SRDCCIPR_LPUART1SEL +#endif /* RCC_D3CCIPR_LPUART1SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2Cx Peripheral I2C get clock source + * @{ + */ +#if defined(RCC_D2CCIP2R_I2C123SEL) +#define LL_RCC_I2C123_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, 0x00000000U) +/* alias */ +#define LL_RCC_I2C1235_CLKSOURCE LL_RCC_I2C123_CLKSOURCE +#elif defined(RCC_D2CCIP2R_I2C1235SEL) +#define LL_RCC_I2C1235_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, 0x00000000U) +/* alias */ +#define LL_RCC_I2C123_CLKSOURCE LL_RCC_I2C1235_CLKSOURCE +#else +#define LL_RCC_I2C123_CLKSOURCE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, 0x00000000U) +/* alias */ +#define LL_RCC_I2C1235_CLKSOURCE LL_RCC_I2C123_CLKSOURCE +#endif /* RCC_D2CCIP2R_I2C123SEL */ +#if defined(RCC_D3CCIPR_I2C4SEL) +#define LL_RCC_I2C4_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, 0x00000000U) +#else +#define LL_RCC_I2C4_CLKSOURCE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_I2C4SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPTIMx Peripheral LPTIM get clock source + * @{ + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define LL_RCC_LPTIM1_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, 0x00000000U) +#else +#define LL_RCC_LPTIM1_CLKSOURCE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP2R_LPTIM1SEL) */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define LL_RCC_LPTIM2_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, 0x00000000U) +#else +#define LL_RCC_LPTIM2_CLKSOURCE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define LL_RCC_LPTIM345_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, 0x00000000U) +#else +#define LL_RCC_LPTIM345_CLKSOURCE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM3_CLKSOURCE LL_RCC_LPTIM345_CLKSOURCE /* alias */ +#endif /* RCC_D3CCIPR_LPTIM345SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SAIx Peripheral SAI get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define LL_RCC_SAI1_CLKSOURCE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, 0x00000000U) +#else +#define LL_RCC_SAI1_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP1R_SAI1SEL */ +#if defined(RCC_D2CCIP1R_SAI23SEL) +#define LL_RCC_SAI23_CLKSOURCE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP1R_SAI23SEL */ +#if defined(RCC_CDCCIP1R_SAI2ASEL) +#define LL_RCC_SAI2A_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, 0x00000000U) +#endif /* RCC_CDCCIP1R_SAI2ASEL */ +#if defined(RCC_CDCCIP1R_SAI2BSEL) +#define LL_RCC_SAI2B_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, 0x00000000U) +#endif /* RCC_CDCCIP1R_SAI2BSEL */ +#if defined(RCC_D3CCIPR_SAI4ASEL) +#define LL_RCC_SAI4A_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_SAI4ASEL */ +#if defined(RCC_D3CCIPR_SAI4BSEL) +#define LL_RCC_SAI4B_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_SAI4BSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SDMMC Peripheral SDMMC get clock source + * @{ + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define LL_RCC_SDMMC_CLKSOURCE RCC_D1CCIPR_SDMMCSEL +#else +#define LL_RCC_SDMMC_CLKSOURCE RCC_CDCCIPR_SDMMCSEL +#endif /* RCC_D1CCIPR_SDMMCSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source + * @{ + */ +#if (RCC_D2CCIP2R_RNGSEL) +#define LL_RCC_RNG_CLKSOURCE RCC_D2CCIP2R_RNGSEL +#else +#define LL_RCC_RNG_CLKSOURCE RCC_CDCCIP2R_RNGSEL +#endif /* RCC_D2CCIP2R_RNGSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#if (RCC_D2CCIP2R_USBSEL) +#define LL_RCC_USB_CLKSOURCE RCC_D2CCIP2R_USBSEL +#else +#define LL_RCC_USB_CLKSOURCE RCC_CDCCIP2R_USBSEL +#endif /* RCC_D2CCIP2R_USBSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source + * @{ + */ +#if (RCC_D2CCIP2R_CECSEL) +#define LL_RCC_CEC_CLKSOURCE RCC_D2CCIP2R_CECSEL +#else +#define LL_RCC_CEC_CLKSOURCE RCC_CDCCIP2R_CECSEL +#endif /* RCC_D2CCIP2R_CECSEL */ +/** + * @} + */ + +#if defined(DSI) +/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source + * @{ + */ +#define LL_RCC_DSI_CLKSOURCE RCC_D1CCIPR_DSISEL +/** + * @} + */ +#endif /* DSI */ + +/** @defgroup RCC_LL_EC_DFSDM Peripheral DFSDM get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) +#define LL_RCC_DFSDM1_CLKSOURCE RCC_D2CCIP1R_DFSDM1SEL +#else +#define LL_RCC_DFSDM1_CLKSOURCE RCC_CDCCIP1R_DFSDM1SEL +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ +/** + * @} + */ + +#if defined(DFSDM2_BASE) +/** @defgroup RCC_LL_EC_DFSDM2 Peripheral DFSDM2 get clock source + * @{ + */ +#define LL_RCC_DFSDM2_CLKSOURCE RCC_SRDCCIPR_DFSDM2SEL +/** + * @} + */ +#endif /* DFSDM2_BASE */ + + + +/** @defgroup RCC_LL_EC_FMC Peripheral FMC get clock source + * @{ + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define LL_RCC_FMC_CLKSOURCE RCC_D1CCIPR_FMCSEL +#else +#define LL_RCC_FMC_CLKSOURCE RCC_CDCCIPR_FMCSEL +#endif +/** + * @} + */ + +#if defined(QUADSPI) +/** @defgroup RCC_LL_EC_QSPI Peripheral QSPI get clock source + * @{ + */ +#define LL_RCC_QSPI_CLKSOURCE RCC_D1CCIPR_QSPISEL +/** + * @} + */ +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @defgroup RCC_LL_EC_OSPI Peripheral OSPI get clock source + * @{ + */ +#if defined(RCC_CDCCIPR_OCTOSPISEL) +#define LL_RCC_OSPI_CLKSOURCE RCC_CDCCIPR_OCTOSPISEL +#else +#define LL_RCC_OSPI_CLKSOURCE RCC_D1CCIPR_OCTOSPISEL +#endif /* RCC_CDCCIPR_OCTOSPISEL */ +/** + * @} + */ +#endif /* OCTOSPI1 || OCTOSPI2 */ + +/** @defgroup RCC_LL_EC_CLKP Peripheral CLKP get clock source + * @{ + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define LL_RCC_CLKP_CLKSOURCE RCC_D1CCIPR_CKPERSEL +#else +#define LL_RCC_CLKP_CLKSOURCE RCC_CDCCIPR_CKPERSEL +#endif /* RCC_D1CCIPR_CKPERSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPIx Peripheral SPI get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define LL_RCC_SPI123_CLKSOURCE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, 0x00000000U) +#else +#define LL_RCC_SPI123_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP1R_SPI123SEL */ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define LL_RCC_SPI45_CLKSOURCE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, 0x00000000U) +#else +#define LL_RCC_SPI45_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP1R_SPI45SEL */ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define LL_RCC_SPI6_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, 0x00000000U) +#else +#define LL_RCC_SPI6_CLKSOURCE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_SPI6SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPDIF Peripheral SPDIF get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define LL_RCC_SPDIF_CLKSOURCE RCC_D2CCIP1R_SPDIFSEL +#else +#define LL_RCC_SPDIF_CLKSOURCE RCC_CDCCIP1R_SPDIFSEL +#endif /* RCC_D2CCIP1R_SPDIFSEL */ +/** + * @} + */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN Peripheral FDCAN get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define LL_RCC_FDCAN_CLKSOURCE RCC_D2CCIP1R_FDCANSEL +#else +#define LL_RCC_FDCAN_CLKSOURCE RCC_CDCCIP1R_FDCANSEL +#endif +/** + * @} + */ +#endif /*FDCAN1 || FDCAN2*/ + +/** @defgroup RCC_LL_EC_SWP Peripheral SWP get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define LL_RCC_SWP_CLKSOURCE RCC_D2CCIP1R_SWPSEL +#else +#define LL_RCC_SWP_CLKSOURCE RCC_CDCCIP1R_SWPSEL +#endif /* RCC_D2CCIP1R_SWPSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source + * @{ + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define LL_RCC_ADC_CLKSOURCE RCC_D3CCIPR_ADCSEL +#else +#define LL_RCC_ADC_CLKSOURCE RCC_SRDCCIPR_ADCSEL +#endif /* RCC_D3CCIPR_ADCSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE (uint32_t)(0x00000000U) +#define LL_RCC_RTC_CLKSOURCE_LSE (uint32_t)(RCC_BDCR_RTCSEL_0) +#define LL_RCC_RTC_CLKSOURCE_LSI (uint32_t)(RCC_BDCR_RTCSEL_1) +#define LL_RCC_RTC_CLKSOURCE_HSE (uint32_t)(RCC_BDCR_RTCSEL_0 | RCC_BDCR_RTCSEL_1) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection + * @{ + */ +#define LL_RCC_TIM_PRESCALER_TWICE (uint32_t)(0x00000000U) +#define LL_RCC_TIM_PRESCALER_FOUR_TIMES (uint32_t)(RCC_CFGR_TIMPRE) +/** + * @} + */ + +#if defined(HRTIM1) +/** @defgroup RCC_LL_EC_HRTIM_CLKSOURCE High Resolution Timers clock selection + * @{ + */ +#define LL_RCC_HRTIM_CLKSOURCE_TIM (uint32_t)(0x00000000U) /* HRTIM Clock source is same as other timers */ +#define LL_RCC_HRTIM_CLKSOURCE_CPU (uint32_t)(RCC_CFGR_HRTIMSEL) /* HRTIM Clock source is the CPU clock */ +/** + * @} + */ +#endif /* HRTIM1 */ + +/** @defgroup RCC_LL_EC_PLLSOURCE All PLLs entry clock source + * @{ + */ +#define LL_RCC_PLLSOURCE_HSI RCC_PLLCKSELR_PLLSRC_HSI +#define LL_RCC_PLLSOURCE_CSI RCC_PLLCKSELR_PLLSRC_CSI +#define LL_RCC_PLLSOURCE_HSE RCC_PLLCKSELR_PLLSRC_HSE +#define LL_RCC_PLLSOURCE_NONE RCC_PLLCKSELR_PLLSRC_NONE +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLINPUTRANGE All PLLs input range + * @{ + */ +#define LL_RCC_PLLINPUTRANGE_1_2 (uint32_t)(0x00000000U) +#define LL_RCC_PLLINPUTRANGE_2_4 (uint32_t)(0x00000001) +#define LL_RCC_PLLINPUTRANGE_4_8 (uint32_t)(0x00000002) +#define LL_RCC_PLLINPUTRANGE_8_16 (uint32_t)(0x00000003) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLVCORANGE All PLLs VCO range + * @{ + */ +#define LL_RCC_PLLVCORANGE_WIDE (uint32_t)(0x00000000U) /* VCO output range: 192 to 836 MHz OR 128 to 544 MHz (*) */ +#define LL_RCC_PLLVCORANGE_MEDIUM (uint32_t)(0x00000001) /* VCO output range: 150 to 420 MHz */ +/** + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the SYSCLK frequency + * @param __SYSINPUTCLKFREQ__ Frequency of the input of sys_ck (based on HSE/CSI/HSI/PLL1P) + * @param __SYSPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval SYSCLK clock frequency (in Hz) + */ +#if defined(RCC_D1CFGR_D1CPRE) +#define LL_RCC_CALC_SYSCLK_FREQ(__SYSINPUTCLKFREQ__, __SYSPRESCALER__) ((__SYSINPUTCLKFREQ__) >> ((LL_RCC_PrescTable[((__SYSPRESCALER__) & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_SYSCLK_FREQ(__SYSINPUTCLKFREQ__, __SYSPRESCALER__) ((__SYSINPUTCLKFREQ__) >> ((LL_RCC_PrescTable[((__SYSPRESCALER__) & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos]) & 0x1FU)) +#endif /* RCC_D1CFGR_D1CPRE */ + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency. + * @param __HPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#if defined(RCC_D1CFGR_HPRE) +#define LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __HPRESCALER__) ((__SYSCLKFREQ__) >> ((LL_RCC_PrescTable[((__HPRESCALER__) & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __HPRESCALER__) ((__SYSCLKFREQ__) >> ((LL_RCC_PrescTable[((__HPRESCALER__) & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)) +#endif /* RCC_D1CFGR_HPRE */ + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#if defined(RCC_D2CFGR_D2PPRE1) +#define LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB1PRESCALER__) & RCC_D2CFGR_D2PPRE1) >> RCC_D2CFGR_D2PPRE1_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB1PRESCALER__) & RCC_CDCFGR2_CDPPRE1) >> RCC_CDCFGR2_CDPPRE1_Pos]) & 0x1FU)) +#endif /* RCC_D2CFGR_D2PPRE1 */ + +/** + * @brief Helper macro to calculate the PCLK2 frequency (ABP2) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB2PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval PCLK2 clock frequency (in Hz) + */ +#if defined(RCC_D2CFGR_D2PPRE2) +#define LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB2PRESCALER__) & RCC_D2CFGR_D2PPRE2) >> RCC_D2CFGR_D2PPRE2_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB2PRESCALER__) & RCC_CDCFGR2_CDPPRE2) >> RCC_CDCFGR2_CDPPRE2_Pos]) & 0x1FU)) +#endif /* RCC_D2CFGR_D2PPRE2 */ + +/** + * @brief Helper macro to calculate the PCLK3 frequency (APB3) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB3PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB3_DIV_1 + * @arg @ref LL_RCC_APB3_DIV_2 + * @arg @ref LL_RCC_APB3_DIV_4 + * @arg @ref LL_RCC_APB3_DIV_8 + * @arg @ref LL_RCC_APB3_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#if defined(RCC_D1CFGR_D1PPRE) +#define LL_RCC_CALC_PCLK3_FREQ(__HCLKFREQ__, __APB3PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB3PRESCALER__) & RCC_D1CFGR_D1PPRE) >> RCC_D1CFGR_D1PPRE_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_PCLK3_FREQ(__HCLKFREQ__, __APB3PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB3PRESCALER__) & RCC_CDCFGR1_CDPPRE) >> RCC_CDCFGR1_CDPPRE_Pos]) & 0x1FU)) +#endif /* RCC_D1CFGR_D1PPRE */ + +/** + * @brief Helper macro to calculate the PCLK4 frequency (ABP4) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB4PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#if defined(RCC_D3CFGR_D3PPRE) +#define LL_RCC_CALC_PCLK4_FREQ(__HCLKFREQ__, __APB4PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB4PRESCALER__) & RCC_D3CFGR_D3PPRE) >> RCC_D3CFGR_D3PPRE_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_PCLK4_FREQ(__HCLKFREQ__, __APB4PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB4PRESCALER__) & RCC_SRDCFGR_SRDPPRE) >> RCC_SRDCFGR_SRDPPRE_Pos]) & 0x1FU)) +#endif /* RCC_D3CFGR_D3PPRE */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @note Once HSE Clock Security System is enabled it cannot be changed anymore unless + * a reset occurs or system enter in standby mode. + * @rmtoll CR CSSHSEON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSHSEON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +#if defined(RCC_CR_HSEEXT) +/** + * @brief Select the Analog HSE external clock type in Bypass mode + * @rmtoll CR HSEEXT LL_RCC_HSE_SelectAnalogClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_SelectAnalogClock(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); +} + +/** + * @brief Select the Digital HSE external clock type in Bypass mode + * @rmtoll CR HSEEXT LL_RCC_HSE_SelectDigitalClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_SelectDigitalClock(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEEXT); +} +#endif /* RCC_CR_HSEEXT */ + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI new divider applied and ready + * @rmtoll CR HSIDIVF LL_RCC_HSI_IsDividerReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsDividerReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIDIVF) == (RCC_CR_HSIDIVF)) ? 1UL : 0UL); +} + +/** + * @brief Set HSI divider + * @rmtoll CR HSIDIV LL_RCC_HSI_SetDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV1 + * @arg @ref LL_RCC_HSI_DIV2 + * @arg @ref LL_RCC_HSI_DIV4 + * @arg @ref LL_RCC_HSI_DIV8 + * @retval None. + */ +__STATIC_INLINE void LL_RCC_HSI_SetDivider(uint32_t Divider) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, Divider); +} + +/** + * @brief Get HSI divider + * @rmtoll CR HSIDIV LL_RCC_HSI_GetDivider + * @retval can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV1 + * @arg @ref LL_RCC_HSI_DIV2 + * @arg @ref LL_RCC_HSI_DIV4 + * @arg @ref LL_RCC_HSI_DIV8 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetDivider(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIDIV)); +} + +/** + * @brief Enable HSI oscillator in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_EnableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Disable HSI oscillator in Stop mode + * @rmtoll CR HSION LL_RCC_HSI_DisableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll HSICFGR HSICAL LL_RCC_HSI_GetCalibration + * @retval A value between 0 and 4095 (0xFFF) + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSICAL) >> RCC_HSICFGR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 64 (32 for Cut1.x), which, when added to the HSICAL value, + * should trim the HSI to 64 MHz +/- 1 % + * @rmtoll HSICFGR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value can be a value between 0 and 127 (63 for Cut1.x) + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + MODIFY_REG(RCC->HSICFGR, 0x3F000U, Value << 12U); + } + else + { + /* STM32H7 Rev.V */ + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, Value << RCC_HSICFGR_HSITRIM_Pos); + } +#else + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, Value << RCC_HSICFGR_HSITRIM_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll HSICFGR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval A value between 0 and 127 (63 for Cut1.x) + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + return (uint32_t)(READ_BIT(RCC->HSICFGR, 0x3F000U) >> 12U); + } + else + { + /* STM32H7 Rev.V */ + return (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); + } +#else + return (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_CSI CSI + * @{ + */ + +/** + * @brief Enable CSI oscillator + * @rmtoll CR CSION LL_RCC_CSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSION); +} + +/** + * @brief Disable CSI oscillator + * @rmtoll CR CSION LL_RCC_CSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSION); +} + +/** + * @brief Check if CSI clock is ready + * @rmtoll CR CSIRDY LL_RCC_CSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_CSIRDY) == (RCC_CR_CSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable CSI oscillator in Stop mode + * @rmtoll CR CSIKERON LL_RCC_CSI_EnableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_EnableStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSIKERON); +} + +/** + * @brief Disable CSI oscillator in Stop mode + * @rmtoll CR CSIKERON LL_RCC_CSI_DisableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_DisableStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSIKERON); +} + +/** + * @brief Get CSI Calibration value + * @note When CSITRIM is written, CSICAL is updated with the sum of + * CSITRIM and the factory trim value + * @rmtoll CSICFGR CSICAL LL_RCC_CSI_GetCalibration + * @retval A value between 0 and 255 (0xFF) + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_GetCalibration(void) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + return (uint32_t)(READ_BIT(RCC->HSICFGR, 0x3FC0000U) >> 18U); + } + else + { + /* STM32H7 Rev.V */ + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSICAL) >> RCC_CSICFGR_CSICAL_Pos); + } +#else + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSICAL) >> RCC_CSICFGR_CSICAL_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @brief Set CSI Calibration trimming + * @note user-programmable trimming value that is added to the CSICAL + * @note Default value is 16, which, when added to the CSICAL value, + * should trim the CSI to 4 MHz +/- 1 % + * @rmtoll CSICFGR CSITRIM LL_RCC_CSI_SetCalibTrimming + * @param Value can be a value between 0 and 31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_SetCalibTrimming(uint32_t Value) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + MODIFY_REG(RCC->HSICFGR, 0x7C000000U, Value << 26U); + } + else + { + /* STM32H7 Rev.V */ + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, Value << RCC_CSICFGR_CSITRIM_Pos); + } +#else + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, Value << RCC_CSICFGR_CSITRIM_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @brief Get CSI Calibration trimming + * @rmtoll CSICFGR CSITRIM LL_RCC_CSI_GetCalibTrimming + * @retval A value between 0 and 31 + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_GetCalibTrimming(void) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + return (uint32_t)(READ_BIT(RCC->HSICFGR, 0x7C000000U) >> 26U); + } + else + { + /* STM32H7 Rev.V */ + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); + } +#else + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI48 HSI48 + * @{ + */ + +/** + * @brief Enable HSI48 oscillator + * @rmtoll CR HSI48ON LL_RCC_HSI48_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Disable HSI48 oscillator + * @rmtoll CR HSI48ON LL_RCC_HSI48_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Check if HSI48 clock is ready + * @rmtoll CR HSI48RDY LL_RCC_HSI48_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == (RCC_CR_HSI48RDY)) ? 1UL : 0UL); +} + +/** + * @brief Get HSI48 Calibration value + * @note When HSI48TRIM is written, HSI48CAL is updated with the sum of + * HSI48TRIM and the factory trim value + * @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration + * @retval A value between 0 and 1023 (0x3FF) + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos); +} +/** + * @} + */ + +#if defined(RCC_CR_D1CKRDY) + +/** @defgroup RCC_LL_EF_D1CLK D1CKREADY + * @{ + */ + +/** + * @brief Check if D1 clock is ready + * @rmtoll CR D1CKRDY LL_RCC_D1CK_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_D1CK_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_D1CKRDY) == (RCC_CR_D1CKRDY)) ? 1UL : 0UL); +} + +/** + * @} + */ +#else + +/** @defgroup RCC_LL_EF_CPUCLK CPUCKREADY + * @{ + */ + +/** + * @brief Check if CPU clock is ready + * @rmtoll CR CPUCKRDY LL_RCC_CPUCK_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_CPUCK_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_CPUCKRDY) == (RCC_CR_CPUCKRDY)) ? 1UL : 0UL); +} +/* alias */ +#define LL_RCC_D1CK_IsReady LL_RCC_CPUCK_IsReady +/** + * @} + */ +#endif /* RCC_CR_D1CKRDY */ + +#if defined(RCC_CR_D2CKRDY) + +/** @defgroup RCC_LL_EF_D2CLK D2CKREADY + * @{ + */ + +/** + * @brief Check if D2 clock is ready + * @rmtoll CR D2CKRDY LL_RCC_D2CK_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_D2CK_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_D2CKRDY) == (RCC_CR_D2CKRDY)) ? 1UL : 0UL); +} +/** + * @} + */ +#else + +/** @defgroup RCC_LL_EF_CDCLK CDCKREADY + * @{ + */ + +/** + * @brief Check if CD clock is ready + * @rmtoll CR CDCKRDY LL_RCC_CDCK_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_CDCK_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_CDCKRDY) == (RCC_CR_CDCKRDY)) ? 1UL : 0UL); +} +#define LL_RCC_D2CK_IsReady LL_RCC_CDCK_IsReady +/** + * @} + */ +#endif /* RCC_CR_D2CKRDY */ + +/** @defgroup RCC_LL_EF_SYSTEM_WIDE_RESET RESET + * @{ + */ +#if defined(RCC_GCR_WW1RSC) + +/** + * @brief Enable system wide reset for Window Watch Dog 1 + * @rmtoll GCR WW1RSC LL_RCC_WWDG1_EnableSystemReset + * @retval None. + */ +__STATIC_INLINE void LL_RCC_WWDG1_EnableSystemReset(void) +{ + SET_BIT(RCC->GCR, RCC_GCR_WW1RSC); +} + +/** + * @brief Check if Window Watch Dog 1 reset is system wide + * @rmtoll GCR WW1RSC LL_RCC_WWDG1_IsSystemReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_WWDG1_IsSystemReset(void) +{ + return ((READ_BIT(RCC->GCR, RCC_GCR_WW1RSC) == RCC_GCR_WW1RSC) ? 1UL : 0UL); +} +#endif /* RCC_GCR_WW1RSC */ + +#if defined(DUAL_CORE) +/** + * @brief Enable system wide reset for Window Watch Dog 2 + * @rmtoll GCR WW1RSC LL_RCC_WWDG2_EnableSystemReset + * @retval None. + */ +__STATIC_INLINE void LL_RCC_WWDG2_EnableSystemReset(void) +{ + SET_BIT(RCC->GCR, RCC_GCR_WW2RSC); +} + +/** + * @brief Check if Window Watch Dog 2 reset is system wide + * @rmtoll GCR WW2RSC LL_RCC_WWDG2_IsSystemReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_WWDG2_IsSystemReset(void) +{ + return ((READ_BIT(RCC->GCR, RCC_GCR_WW2RSC) == RCC_GCR_WW2RSC) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @defgroup RCC_LL_EF_BOOT_CPU CPU + * @{ + */ + +/** + * @brief Force CM4 boot (if hold by option byte BCM4 = 0) + * @rmtoll GCR BOOT_C2 LL_RCC_ForceCM4Boot + * @retval None. + */ +__STATIC_INLINE void LL_RCC_ForceCM4Boot(void) +{ + SET_BIT(RCC->GCR, RCC_GCR_BOOT_C2); +} + +/** + * @brief Check if CM4 boot is forced + * @rmtoll GCR BOOT_C2 LL_RCC_IsCM4BootForced + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsCM4BootForced(void) +{ + return ((READ_BIT(RCC->GCR, RCC_GCR_BOOT_C2) == RCC_GCR_BOOT_C2) ? 1UL : 0UL); +} + +/** + * @brief Force CM7 boot (if hold by option byte BCM7 = 0) + * @rmtoll GCR BOOT_C1 LL_RCC_ForceCM7Boot + * @retval None. + */ +__STATIC_INLINE void LL_RCC_ForceCM7Boot(void) +{ + SET_BIT(RCC->GCR, RCC_GCR_BOOT_C1); +} + +/** + * @brief Check if CM7 boot is forced + * @rmtoll GCR BOOT_C1 LL_RCC_IsCM7BootForced + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsCM7BootForced(void) +{ + return ((READ_BIT(RCC->GCR, RCC_GCR_BOOT_C1) == RCC_GCR_BOOT_C1) ? 1UL : 0UL); +} + +/** + * @} + */ +#endif /*DUAL_CORE*/ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable the Clock Security System on LSE. + * @note Once LSE Clock Security System is enabled it cannot be changed anymore unless + * a clock failure is detected. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Check if LSE failure is detected by Clock Security System + * @rmtoll BDCR LSECSSD LL_RCC_LSE_IsFailureDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsFailureDetected(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == (RCC_BDCR_LSECSSD)) ? 1UL : 0UL); +} + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +#if defined(RCC_BDCR_LSEEXT) +/** + * @brief Enable Low-speed external DIGITAL clock type in Bypass mode (not to be used if RTC is active). + * @note The external clock must be enabled with the LSEON bit, to be used by the device. + * The LSEEXT bit can be written only if the LSE oscillator is disabled. + * @rmtoll BDCR LSEEXT LL_RCC_LSE_SelectDigitalClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SelectDigitalClock(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); +} + +/** + * @brief Enable Low-speed external ANALOG clock type in Bypass mode (default after Backup domain reset). + * @note The external clock must be enabled with the LSEON bit, to be used by the device. + * The LSEEXT bit can be written only if the LSE oscillator is disabled. + * @rmtoll BDCR LSEEXT LL_RCC_LSE_SelectAnalogClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SelectAnalogClock(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); +} +#endif /* RCC_BDCR_LSEEXT */ + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_CSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_CSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL1 + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Configure the system wakeup clock source + * @rmtoll CFGR STOPWUCK LL_RCC_SetSysWakeUpClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysWakeUpClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, Source); +} + +/** + * @brief Get the system wakeup clock source + * @rmtoll CFGR STOPWUCK LL_RCC_GetSysWakeUpClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysWakeUpClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPWUCK)); +} + +/** + * @brief Configure the kernel wakeup clock source + * @rmtoll CFGR STOPKERWUCK LL_RCC_SetKerWakeUpClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetKerWakeUpClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPKERWUCK, Source); +} + +/** + * @brief Get the kernel wakeup clock source + * @rmtoll CFGR STOPKERWUCK LL_RCC_GetKerWakeUpClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetKerWakeUpClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPKERWUCK)); +} + +/** + * @brief Set System prescaler + * @rmtoll D1CFGR/CDCFGR1 D1CPRE/CDCPRE LL_RCC_SetSysPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysPrescaler(uint32_t Prescaler) +{ +#if defined(RCC_D1CFGR_D1CPRE) + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1CPRE, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDCPRE, Prescaler); +#endif /* RCC_D1CFGR_D1CPRE */ +} + +/** + * @brief Set AHB prescaler + * @rmtoll D1CFGR/CDCFGR1 HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ +#if defined(RCC_D1CFGR_HPRE) + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_HPRE, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_HPRE, Prescaler); +#endif /* RCC_D1CFGR_HPRE */ +} + +/** + * @brief Set APB1 prescaler + * @rmtoll D2CFGR/CDCFGR2 D2PPRE1/CDPPRE1 LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ +#if defined(RCC_D2CFGR_D2PPRE1) + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE1, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE1, Prescaler); +#endif /* RCC_D2CFGR_D2PPRE1 */ +} + +/** + * @brief Set APB2 prescaler + * @rmtoll D2CFGR/CDCFGR2 D2PPRE2/CDPPRE2 LL_RCC_SetAPB2Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) +{ +#if defined(RCC_D2CFGR_D2PPRE2) + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE2, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE2, Prescaler); +#endif /* RCC_D2CFGR_D2PPRE2 */ +} + +/** + * @brief Set APB3 prescaler + * @rmtoll D1CFGR/CDCFGR1 D1PPRE/CDPPRE LL_RCC_SetAPB3Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB3_DIV_1 + * @arg @ref LL_RCC_APB3_DIV_2 + * @arg @ref LL_RCC_APB3_DIV_4 + * @arg @ref LL_RCC_APB3_DIV_8 + * @arg @ref LL_RCC_APB3_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB3Prescaler(uint32_t Prescaler) +{ +#if defined(RCC_D1CFGR_D1PPRE) + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1PPRE, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDPPRE, Prescaler); +#endif /* RCC_D1CFGR_D1PPRE */ +} + +/** + * @brief Set APB4 prescaler + * @rmtoll D3CFGR/SRDCFGR D3PPRE/SRDPPRE LL_RCC_SetAPB4Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB4Prescaler(uint32_t Prescaler) +{ +#if defined(RCC_D3CFGR_D3PPRE) + MODIFY_REG(RCC->D3CFGR, RCC_D3CFGR_D3PPRE, Prescaler); +#else + MODIFY_REG(RCC->SRDCFGR, RCC_SRDCFGR_SRDPPRE, Prescaler); +#endif /* RCC_D3CFGR_D3PPRE */ +} + +/** + * @brief Get System prescaler + * @rmtoll D1CFGR/CDCFGR1 D1CPRE/CDCPRE LL_RCC_GetSysPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysPrescaler(void) +{ +#if defined(RCC_D1CFGR_D1CPRE) + return (uint32_t)(READ_BIT(RCC->D1CFGR, RCC_D1CFGR_D1CPRE)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR1, RCC_CDCFGR1_CDCPRE)); +#endif /* RCC_D1CFGR_D1CPRE */ +} + +/** + * @brief Get AHB prescaler + * @rmtoll D1CFGR/ CDCFGR1 HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ +#if defined(RCC_D1CFGR_HPRE) + return (uint32_t)(READ_BIT(RCC->D1CFGR, RCC_D1CFGR_HPRE)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR1, RCC_CDCFGR1_HPRE)); +#endif /* RCC_D1CFGR_HPRE */ +} + +/** + * @brief Get APB1 prescaler + * @rmtoll D2CFGR/CDCFGR2 D2PPRE1/CDPPRE1 LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ +#if defined(RCC_D2CFGR_D2PPRE1) + return (uint32_t)(READ_BIT(RCC->D2CFGR, RCC_D2CFGR_D2PPRE1)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE1)); +#endif /* RCC_D2CFGR_D2PPRE1 */ +} + +/** + * @brief Get APB2 prescaler + * @rmtoll D2CFGR/CDCFGR2 D2PPRE2/CDPPRE2 LL_RCC_GetAPB2Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) +{ +#if defined(RCC_D2CFGR_D2PPRE2) + return (uint32_t)(READ_BIT(RCC->D2CFGR, RCC_D2CFGR_D2PPRE2)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE2)); +#endif /* RCC_D2CFGR_D2PPRE2 */ +} + +/** + * @brief Get APB3 prescaler + * @rmtoll D1CFGR/CDCFGR1 D1PPRE/CDPPRE LL_RCC_GetAPB3Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB3_DIV_1 + * @arg @ref LL_RCC_APB3_DIV_2 + * @arg @ref LL_RCC_APB3_DIV_4 + * @arg @ref LL_RCC_APB3_DIV_8 + * @arg @ref LL_RCC_APB3_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB3Prescaler(void) +{ +#if defined(RCC_D1CFGR_D1PPRE) + return (uint32_t)(READ_BIT(RCC->D1CFGR, RCC_D1CFGR_D1PPRE)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR1, RCC_CDCFGR1_CDPPRE)); +#endif /* RCC_D1CFGR_D1PPRE */ +} + +/** + * @brief Get APB4 prescaler + * @rmtoll D3CFGR/SRDCFGR D3PPRE/SRDPPRE LL_RCC_GetAPB4Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB4Prescaler(void) +{ +#if defined(RCC_D3CFGR_D3PPRE) + return (uint32_t)(READ_BIT(RCC->D3CFGR, RCC_D3CFGR_D3PPRE)); +#else + return (uint32_t)(READ_BIT(RCC->SRDCFGR, RCC_SRDCFGR_SRDPPRE)); +#endif /* RCC_D3CFGR_D3PPRE */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n + * CFGR MCO1PRE LL_RCC_ConfigMCO\n + * CFGR MCO2 LL_RCC_ConfigMCO\n + * CFGR MCO2PRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLL1QCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 + * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO2SOURCE_PLL2PCLK + * @arg @ref LL_RCC_MCO2SOURCE_HSE + * @arg @ref LL_RCC_MCO2SOURCE_PLL1PCLK + * @arg @ref LL_RCC_MCO2SOURCE_CSI + * @arg @ref LL_RCC_MCO2SOURCE_LSI + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_3 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_5 + * @arg @ref LL_RCC_MCO1_DIV_6 + * @arg @ref LL_RCC_MCO1_DIV_7 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_9 + * @arg @ref LL_RCC_MCO1_DIV_10 + * @arg @ref LL_RCC_MCO1_DIV_11 + * @arg @ref LL_RCC_MCO1_DIV_12 + * @arg @ref LL_RCC_MCO1_DIV_13 + * @arg @ref LL_RCC_MCO1_DIV_14 + * @arg @ref LL_RCC_MCO1_DIV_15 + * @arg @ref LL_RCC_MCO2_DIV_1 + * @arg @ref LL_RCC_MCO2_DIV_2 + * @arg @ref LL_RCC_MCO2_DIV_3 + * @arg @ref LL_RCC_MCO2_DIV_4 + * @arg @ref LL_RCC_MCO2_DIV_5 + * @arg @ref LL_RCC_MCO2_DIV_6 + * @arg @ref LL_RCC_MCO2_DIV_7 + * @arg @ref LL_RCC_MCO2_DIV_8 + * @arg @ref LL_RCC_MCO2_DIV_9 + * @arg @ref LL_RCC_MCO2_DIV_10 + * @arg @ref LL_RCC_MCO2_DIV_11 + * @arg @ref LL_RCC_MCO2_DIV_12 + * @arg @ref LL_RCC_MCO2_DIV_13 + * @arg @ref LL_RCC_MCO2_DIV_14 + * @arg @ref LL_RCC_MCO2_DIV_15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, (MCOxSource << 16U) | (MCOxPrescaler << 16U), (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure periph clock source + * @rmtoll D2CCIP1R/CDCCIP1R * LL_RCC_SetClockSource\n + * D2CCIP2R/CDCCIP2R * LL_RCC_SetClockSource\n + * D3CCIPR/SRDCCIPR * LL_RCC_SetClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C123_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C123_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI123_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_I2S_CKIN (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_FMCSEL) + uint32_t *pReg = (uint32_t *)((uint32_t)&RCC->D1CCIPR + LL_CLKSOURCE_REG(ClkSource)); +#else + uint32_t *pReg = (uint32_t *)((uint32_t)&RCC->CDCCIPR + LL_CLKSOURCE_REG(ClkSource)); +#endif /* */ + MODIFY_REG(*pReg, LL_CLKSOURCE_MASK(ClkSource), LL_CLKSOURCE_CONFIG(ClkSource)); +} + +/** + * @brief Configure USARTx clock source + * @rmtoll D2CCIP2R / D2CCIP2R USART16SEL LL_RCC_SetUSARTClockSource\n + * D2CCIP2R / D2CCIP2R USART28SEL LL_RCC_SetUSARTClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure LPUARTx clock source + * @rmtoll D3CCIPR / SRDCCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D3CCIPR_LPUART1SEL) + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL, ClkSource); +#else + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL, ClkSource); +#endif /* RCC_D3CCIPR_LPUART1SEL */ +} + +/** + * @brief Configure I2Cx clock source + * @rmtoll D2CCIP2R / CDCCIP2R I2C123SEL LL_RCC_SetI2CClockSource\n + * D3CCIPR / SRDCCIPR I2C4SEL LL_RCC_SetI2CClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C123_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C123_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure LPTIMx clock source + * @rmtoll D2CCIP2R / CDCCIP2R LPTIM1SEL LL_RCC_SetLPTIMClockSource + * D3CCIPR / SRDCCIPR LPTIM2SEL LL_RCC_SetLPTIMClockSource\n + * D3CCIPR / SRDCCIPR LPTIM345SEL LL_RCC_SetLPTIMClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure SAIx clock source + * @rmtoll D2CCIP1R / CDCCIP1R SAI1SEL LL_RCC_SetSAIClockSource\n + * D2CCIP1R / CDCCIP1R SAI23SEL LL_RCC_SetSAIClockSource + * D3CCIPR / SRDCCIPR SAI4ASEL LL_RCC_SetSAI4xClockSource\n + * D3CCIPR / SRDCCIPR SAI4BSEL LL_RCC_SetSAI4xClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure SDMMCx clock source + * @rmtoll D1CCIPR / CDCCIPR SDMMCSEL LL_RCC_SetSDMMCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL2R + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_SDMMCSEL) + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL, ClkSource); +#endif /* RCC_D1CCIPR_SDMMCSEL */ +} + +/** + * @brief Configure RNGx clock source + * @rmtoll D2CCIP2R / CDCCIP2R RNGSEL LL_RCC_SetRNGClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_RNG_CLKSOURCE_LSE + * @arg @ref LL_RCC_RNG_CLKSOURCE_LSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP2R_RNGSEL) + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL, ClkSource); +#endif /* RCC_D2CCIP2R_RNGSEL */ +} + +/** + * @brief Configure USBx clock source + * @rmtoll D2CCIP2R / CDCCIP2R USBSEL LL_RCC_SetUSBClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_DISABLE + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP2R_USBSEL) + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL, ClkSource); +#endif /* RCC_D2CCIP2R_USBSEL */ +} + +/** + * @brief Configure CECx clock source + * @rmtoll D2CCIP2R / CDCCIP2R CECSEL LL_RCC_SetCECClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSI + * @arg @ref LL_RCC_CEC_CLKSOURCE_CSI_DIV122 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP2R_CECSEL) + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL, ClkSource); +#endif /* RCC_D2CCIP2R_CECSEL */ +} + +#if defined(DSI) +/** + * @brief Configure DSIx clock source + * @rmtoll D1CCIPR DSISEL LL_RCC_SetDSIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY + * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL2Q + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL, ClkSource); +} +#endif /* DSI */ + +/** + * @brief Configure DFSDMx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R DFSDM1SEL LL_RCC_SetDFSDMClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL, ClkSource); +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ +} + +#if defined(DFSDM2_BASE) +/** + * @brief Configure DFSDMx Kernel clock source + * @rmtoll SRDCCIPR DFSDM2SEL LL_RCC_SetDFSDM2ClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDFSDM2ClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL, ClkSource); +} +#endif /* DFSDM2_BASE */ + +/** + * @brief Configure FMCx Kernel clock source + * @rmtoll D1CCIPR / CDCCIPR FMCSEL LL_RCC_SetFMCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE_HCLK + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_FMC_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFMCClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_FMCSEL) + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL, ClkSource); +#endif /* RCC_D1CCIPR_FMCSEL */ +} + +#if defined(QUADSPI) +/** + * @brief Configure QSPIx Kernel clock source + * @rmtoll D1CCIPR QSPISEL LL_RCC_SetQSPIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_QSPI_CLKSOURCE_HCLK + * @arg @ref LL_RCC_QSPI_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_QSPI_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_QSPI_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetQSPIClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL, ClkSource); +} +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** + * @brief Configure OSPIx Kernel clock source + * @rmtoll D1CCIPR OPISEL LL_RCC_SetOSPIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_OSPI_CLKSOURCE_HCLK + * @arg @ref LL_RCC_OSPI_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_OSPI_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_OSPI_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetOSPIClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_OCTOSPISEL) + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL, ClkSource); +#endif /* RCC_D1CCIPR_OCTOSPISEL */ +} +#endif /* OCTOSPI1 || OCTOSPI2 */ + +/** + * @brief Configure CLKP Kernel clock source + * @rmtoll D1CCIPR / CDCCIPR CKPERSEL LL_RCC_SetCLKPClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_CSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCLKPClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_CKPERSEL) + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL, ClkSource); +#endif /* RCC_D1CCIPR_CKPERSEL */ +} + +/** + * @brief Configure SPIx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SPI123SEL LL_RCC_SetSPIClockSource\n + * D2CCIP1R / CDCCIP1R SPI45SEL LL_RCC_SetSPIClockSource\n + * D3CCIPR / SRDCCIPR SPI6SEL LL_RCC_SetSPIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI123_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_I2S_CKIN (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSPIClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure SPDIFx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SPDIFSEL LL_RCC_SetSPDIFClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSPDIFClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP1R_SPDIFSEL) + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL, ClkSource); +#endif /* RCC_D2CCIP1R_SPDIFSEL */ +} + +/** + * @brief Configure FDCANx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R FDCANSEL LL_RCC_SetFDCANClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL2Q + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFDCANClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP1R_FDCANSEL) + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL, ClkSource); +#endif /* RCC_D2CCIP1R_FDCANSEL */ +} + +/** + * @brief Configure SWPx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SWPSEL LL_RCC_SetSWPClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SWP_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_SWP_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSWPClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP1R_SWPSEL) + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL, ClkSource); +#endif /* RCC_D2CCIP1R_SWPSEL */ +} + +/** + * @brief Configure ADCx Kernel clock source + * @rmtoll D3CCIPR / SRDCCIPR ADCSEL LL_RCC_SetADCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_ADC_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D3CCIPR_ADCSEL) + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL, ClkSource); +#else + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL, ClkSource); +#endif /* RCC_D3CCIPR_ADCSEL */ +} + +/** + * @brief Get periph clock source + * @rmtoll D1CCIPR / CDCCIPR * LL_RCC_GetClockSource\n + * D2CCIP1R / CDCCIP1R * LL_RCC_GetClockSource\n + * D2CCIP2R / CDCCIP2R * LL_RCC_GetClockSource\n + * D3CCIPR / SRDCCIPR * LL_RCC_GetClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE + * @arg @ref LL_RCC_USART234578_CLKSOURCE + * @arg @ref LL_RCC_I2C123_CLKSOURCE + * @arg @ref LL_RCC_I2C4_CLKSOURCE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE + * @arg @ref LL_RCC_SAI1_CLKSOURCE + * @arg @ref LL_RCC_SAI23_CLKSOURCE + * @arg @ref LL_RCC_SAI4A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE (*) + * @arg @ref LL_RCC_SPI123_CLKSOURCE (*) + * @arg @ref LL_RCC_SPI45_CLKSOURCE (*) + * @arg @ref LL_RCC_SPI6_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C123_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C123_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI123_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_I2S_CKIN (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_GetClockSource(uint32_t Periph) +{ +#if defined(RCC_D1CCIPR_FMCSEL) + const uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&RCC->D1CCIPR) + LL_CLKSOURCE_REG(Periph))); +#else + const uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&RCC->CDCCIPR) + LL_CLKSOURCE_REG(Periph))); +#endif /* RCC_D1CCIPR_FMCSEL */ + return (uint32_t)(Periph | (((READ_BIT(*pReg, LL_CLKSOURCE_MASK(Periph))) >> LL_CLKSOURCE_SHIFT(Periph)) << LL_RCC_CONFIG_SHIFT)); +} + +/** + * @brief Get USARTx clock source + * @rmtoll D2CCIP2R / CDCCIP2R USART16SEL LL_RCC_GetUSARTClockSource\n + * D2CCIP2R / CDCCIP2R USART28SEL LL_RCC_GetUSARTClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE + * @arg @ref LL_RCC_USART234578_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get LPUART clock source + * @rmtoll D3CCIPR / SRDCCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D3CCIPR_LPUART1SEL) + return (uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL)); +#else + return (uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL)); +#endif /* RCC_D3CCIPR_LPUART1SEL */ +} + +/** + * @brief Get I2Cx clock source + * @rmtoll D2CCIP2R / CDCCIP2R I2C123SEL LL_RCC_GetI2CClockSource\n + * D3CCIPR / SRDCCIPR I2C4SEL LL_RCC_GetI2CClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C123_CLKSOURCE + * @arg @ref LL_RCC_I2C4_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C123_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C123_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get LPTIM clock source + * @rmtoll D2CCIP2R / CDCCIP2R LPTIM1SEL LL_RCC_GetLPTIMClockSource\n + * D3CCIPR / SRDCCIPR LPTIM2SEL LL_RCC_GetLPTIMClockSource\n + * D3CCIPR / SRDCCIPR LPTIM345SEL LL_RCC_GetLPTIMClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get SAIx clock source + * @rmtoll D2CCIP1R / CDCCIP1R SAI1SEL LL_RCC_GetSAIClockSource\n + * D2CCIP1R / CDCCIP1R SAI23SEL LL_RCC_GetSAIClockSource + * D3CCIPR / SRDCCIPR SAI4ASEL LL_RCC_GetSAIClockSource\n + * D3CCIPR / SRDCCIPR SAI4BSEL LL_RCC_GetSAIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_CLKP (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get SDMMC clock source + * @rmtoll D1CCIPR / CDCCIPR SDMMCSEL LL_RCC_GetSDMMCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL2R + */ +__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D1CCIPR_SDMMCSEL) + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL)); +#endif /* RCC_D1CCIPR_SDMMCSEL */ +} + +/** + * @brief Get RNG clock source + * @rmtoll D2CCIP2R RNGSEL LL_RCC_GetRNGClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_RNG_CLKSOURCE_LSE + * @arg @ref LL_RCC_RNG_CLKSOURCE_LSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP2R_RNGSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL)); +#endif /* RCC_D2CCIP2R_RNGSEL */ +} + +/** + * @brief Get USB clock source + * @rmtoll D2CCIP2R / CDCCIP2R USBSEL LL_RCC_GetUSBClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_DISABLE + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP2R_USBSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL)); +#endif /* RCC_D2CCIP2R_USBSEL */ +} + +/** + * @brief Get CEC clock source + * @rmtoll D2CCIP2R / CDCCIP2R CECSEL LL_RCC_GetCECClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSI + * @arg @ref LL_RCC_CEC_CLKSOURCE_CSI_DIV122 + */ +__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP2R_CECSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL)); +#endif /* RCC_D2CCIP2R_CECSEL */ +} + +#if defined(DSI) +/** + * @brief Get DSI clock source + * @rmtoll D1CCIPR DSISEL LL_RCC_GetDSIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY + * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL2Q + */ +__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL)); +} +#endif /* DSI */ + +/** + * @brief Get DFSDM Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R DFSDM1SEL LL_RCC_GetDFSDMClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP1R_DFSDM1SEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL)); +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ +} + +#if defined(DFSDM2_BASE) +/** + * @brief Get DFSDM2 Kernel clock source + * @rmtoll SRDCCIPR DFSDM2SEL LL_RCC_GetDFSDM2ClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetDFSDM2ClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL)); +} +#endif /* DFSDM2_BASE */ + +/** + * @brief Get FMC Kernel clock source + * @rmtoll D1CCIPR / D1CCIPR FMCSEL LL_RCC_GetFMCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE_HCLK + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_FMC_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetFMCClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D1CCIPR_FMCSEL) + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL)); +#endif /* RCC_D1CCIPR_FMCSEL */ +} + +#if defined(QUADSPI) +/** + * @brief Get QSPI Kernel clock source + * @rmtoll D1CCIPR / CDCCIPR QSPISEL LL_RCC_GetQSPIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_QSPI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_QSPI_CLKSOURCE_HCLK + * @arg @ref LL_RCC_QSPI_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_QSPI_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_QSPI_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetQSPIClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL)); +} +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** + * @brief Get OSPI Kernel clock source + * @rmtoll CDCCIPR OSPISEL LL_RCC_GetOSPIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_OSPI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_OSPI_CLKSOURCE_HCLK + * @arg @ref LL_RCC_OSPI_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_OSPI_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_OSPI_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetOSPIClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D1CCIPR_OCTOSPISEL) + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL)); +#endif /* RCC_D1CCIPR_OCTOSPISEL */ +} +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ + +/** + * @brief Get CLKP Kernel clock source + * @rmtoll D1CCIPR / CDCCIPR CKPERSEL LL_RCC_GetCLKPClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_CSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetCLKPClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D1CCIPR_CKPERSEL) + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL)); +#endif /* RCC_D1CCIPR_CKPERSEL */ +} + +/** + * @brief Get SPIx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SPI123SEL LL_RCC_GetSPIClockSource\n + * D2CCIP1R / CDCCIP1R SPI45SEL LL_RCC_GetSPIClockSource\n + * D3CCIPR / SRDCCIPR SPI6SEL LL_RCC_GetSPIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI123_CLKSOURCE + * @arg @ref LL_RCC_SPI45_CLKSOURCE + * @arg @ref LL_RCC_SPI6_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI123_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_I2S_CKIN (*) + * + * (*) value not defined in all stm32h7xx lines. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSPIClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get SPDIF Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SPDIFSEL LL_RCC_GetSPDIFClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIF_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSPDIFClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP1R_SPDIFSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL)); +#endif /* RCC_D2CCIP1R_SPDIFSEL */ +} + +/** + * @brief Get FDCAN Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R FDCANSEL LL_RCC_GetFDCANClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL2Q + */ +__STATIC_INLINE uint32_t LL_RCC_GetFDCANClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP1R_FDCANSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL)); +#endif /* RCC_D2CCIP1R_FDCANSEL */ +} + +/** + * @brief Get SWP Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SWPSEL LL_RCC_GetSWPClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SWP_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SWP_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_SWP_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSWPClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP1R_SWPSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL)); +#endif /* RCC_D2CCIP1R_SWPSEL */ +} + +/** + * @brief Get ADC Kernel clock source + * @rmtoll D3CCIPR / SRDCCIPR ADCSEL LL_RCC_GetADCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_ADC_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined (RCC_D3CCIPR_ADCSEL) + return (uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL)); +#else + return (uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL)); +#endif /* RCC_D3CCIPR_ADCSEL */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)) ? 1UL : 0UL); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST / VSWRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST / VSWRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ +#if defined(RCC_BDCR_BDRST) + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +#else + CLEAR_BIT(RCC->BDCR, RCC_BDCR_VSWRST); +#endif /* RCC_BDCR_BDRST */ +} + +/** + * @brief Set HSE Prescalers for RTC Clock + * @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_NOCLOCK + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_3 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_5 + * @arg @ref LL_RCC_RTC_HSE_DIV_6 + * @arg @ref LL_RCC_RTC_HSE_DIV_7 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_9 + * @arg @ref LL_RCC_RTC_HSE_DIV_10 + * @arg @ref LL_RCC_RTC_HSE_DIV_11 + * @arg @ref LL_RCC_RTC_HSE_DIV_12 + * @arg @ref LL_RCC_RTC_HSE_DIV_13 + * @arg @ref LL_RCC_RTC_HSE_DIV_14 + * @arg @ref LL_RCC_RTC_HSE_DIV_15 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @arg @ref LL_RCC_RTC_HSE_DIV_17 + * @arg @ref LL_RCC_RTC_HSE_DIV_18 + * @arg @ref LL_RCC_RTC_HSE_DIV_19 + * @arg @ref LL_RCC_RTC_HSE_DIV_20 + * @arg @ref LL_RCC_RTC_HSE_DIV_21 + * @arg @ref LL_RCC_RTC_HSE_DIV_22 + * @arg @ref LL_RCC_RTC_HSE_DIV_23 + * @arg @ref LL_RCC_RTC_HSE_DIV_24 + * @arg @ref LL_RCC_RTC_HSE_DIV_25 + * @arg @ref LL_RCC_RTC_HSE_DIV_26 + * @arg @ref LL_RCC_RTC_HSE_DIV_27 + * @arg @ref LL_RCC_RTC_HSE_DIV_28 + * @arg @ref LL_RCC_RTC_HSE_DIV_29 + * @arg @ref LL_RCC_RTC_HSE_DIV_30 + * @arg @ref LL_RCC_RTC_HSE_DIV_31 + * @arg @ref LL_RCC_RTC_HSE_DIV_32 + * @arg @ref LL_RCC_RTC_HSE_DIV_33 + * @arg @ref LL_RCC_RTC_HSE_DIV_34 + * @arg @ref LL_RCC_RTC_HSE_DIV_35 + * @arg @ref LL_RCC_RTC_HSE_DIV_36 + * @arg @ref LL_RCC_RTC_HSE_DIV_37 + * @arg @ref LL_RCC_RTC_HSE_DIV_38 + * @arg @ref LL_RCC_RTC_HSE_DIV_39 + * @arg @ref LL_RCC_RTC_HSE_DIV_40 + * @arg @ref LL_RCC_RTC_HSE_DIV_41 + * @arg @ref LL_RCC_RTC_HSE_DIV_42 + * @arg @ref LL_RCC_RTC_HSE_DIV_43 + * @arg @ref LL_RCC_RTC_HSE_DIV_44 + * @arg @ref LL_RCC_RTC_HSE_DIV_45 + * @arg @ref LL_RCC_RTC_HSE_DIV_46 + * @arg @ref LL_RCC_RTC_HSE_DIV_47 + * @arg @ref LL_RCC_RTC_HSE_DIV_48 + * @arg @ref LL_RCC_RTC_HSE_DIV_49 + * @arg @ref LL_RCC_RTC_HSE_DIV_50 + * @arg @ref LL_RCC_RTC_HSE_DIV_51 + * @arg @ref LL_RCC_RTC_HSE_DIV_52 + * @arg @ref LL_RCC_RTC_HSE_DIV_53 + * @arg @ref LL_RCC_RTC_HSE_DIV_54 + * @arg @ref LL_RCC_RTC_HSE_DIV_55 + * @arg @ref LL_RCC_RTC_HSE_DIV_56 + * @arg @ref LL_RCC_RTC_HSE_DIV_57 + * @arg @ref LL_RCC_RTC_HSE_DIV_58 + * @arg @ref LL_RCC_RTC_HSE_DIV_59 + * @arg @ref LL_RCC_RTC_HSE_DIV_60 + * @arg @ref LL_RCC_RTC_HSE_DIV_61 + * @arg @ref LL_RCC_RTC_HSE_DIV_62 + * @arg @ref LL_RCC_RTC_HSE_DIV_63 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler); +} + +/** + * @brief Get HSE Prescalers for RTC Clock + * @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_NOCLOCK + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_3 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_5 + * @arg @ref LL_RCC_RTC_HSE_DIV_6 + * @arg @ref LL_RCC_RTC_HSE_DIV_7 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_9 + * @arg @ref LL_RCC_RTC_HSE_DIV_10 + * @arg @ref LL_RCC_RTC_HSE_DIV_11 + * @arg @ref LL_RCC_RTC_HSE_DIV_12 + * @arg @ref LL_RCC_RTC_HSE_DIV_13 + * @arg @ref LL_RCC_RTC_HSE_DIV_14 + * @arg @ref LL_RCC_RTC_HSE_DIV_15 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @arg @ref LL_RCC_RTC_HSE_DIV_17 + * @arg @ref LL_RCC_RTC_HSE_DIV_18 + * @arg @ref LL_RCC_RTC_HSE_DIV_19 + * @arg @ref LL_RCC_RTC_HSE_DIV_20 + * @arg @ref LL_RCC_RTC_HSE_DIV_21 + * @arg @ref LL_RCC_RTC_HSE_DIV_22 + * @arg @ref LL_RCC_RTC_HSE_DIV_23 + * @arg @ref LL_RCC_RTC_HSE_DIV_24 + * @arg @ref LL_RCC_RTC_HSE_DIV_25 + * @arg @ref LL_RCC_RTC_HSE_DIV_26 + * @arg @ref LL_RCC_RTC_HSE_DIV_27 + * @arg @ref LL_RCC_RTC_HSE_DIV_28 + * @arg @ref LL_RCC_RTC_HSE_DIV_29 + * @arg @ref LL_RCC_RTC_HSE_DIV_30 + * @arg @ref LL_RCC_RTC_HSE_DIV_31 + * @arg @ref LL_RCC_RTC_HSE_DIV_32 + * @arg @ref LL_RCC_RTC_HSE_DIV_33 + * @arg @ref LL_RCC_RTC_HSE_DIV_34 + * @arg @ref LL_RCC_RTC_HSE_DIV_35 + * @arg @ref LL_RCC_RTC_HSE_DIV_36 + * @arg @ref LL_RCC_RTC_HSE_DIV_37 + * @arg @ref LL_RCC_RTC_HSE_DIV_38 + * @arg @ref LL_RCC_RTC_HSE_DIV_39 + * @arg @ref LL_RCC_RTC_HSE_DIV_40 + * @arg @ref LL_RCC_RTC_HSE_DIV_41 + * @arg @ref LL_RCC_RTC_HSE_DIV_42 + * @arg @ref LL_RCC_RTC_HSE_DIV_43 + * @arg @ref LL_RCC_RTC_HSE_DIV_44 + * @arg @ref LL_RCC_RTC_HSE_DIV_45 + * @arg @ref LL_RCC_RTC_HSE_DIV_46 + * @arg @ref LL_RCC_RTC_HSE_DIV_47 + * @arg @ref LL_RCC_RTC_HSE_DIV_48 + * @arg @ref LL_RCC_RTC_HSE_DIV_49 + * @arg @ref LL_RCC_RTC_HSE_DIV_50 + * @arg @ref LL_RCC_RTC_HSE_DIV_51 + * @arg @ref LL_RCC_RTC_HSE_DIV_52 + * @arg @ref LL_RCC_RTC_HSE_DIV_53 + * @arg @ref LL_RCC_RTC_HSE_DIV_54 + * @arg @ref LL_RCC_RTC_HSE_DIV_55 + * @arg @ref LL_RCC_RTC_HSE_DIV_56 + * @arg @ref LL_RCC_RTC_HSE_DIV_57 + * @arg @ref LL_RCC_RTC_HSE_DIV_58 + * @arg @ref LL_RCC_RTC_HSE_DIV_59 + * @arg @ref LL_RCC_RTC_HSE_DIV_60 + * @arg @ref LL_RCC_RTC_HSE_DIV_61 + * @arg @ref LL_RCC_RTC_HSE_DIV_62 + * @arg @ref LL_RCC_RTC_HSE_DIV_63 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM + * @{ + */ + +/** + * @brief Set Timers Clock Prescalers + * @rmtoll CFGR TIMPRE LL_RCC_SetTIMPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM_PRESCALER_TWICE + * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_TIMPRE, Prescaler); +} + +/** + * @brief Get Timers Clock Prescalers + * @rmtoll CFGR TIMPRE LL_RCC_GetTIMPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_TIM_PRESCALER_TWICE + * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES + */ +__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_TIMPRE)); +} + +/** + * @} + */ + +#if defined(HRTIM1) +/** @defgroup RCC_LL_EF_HRTIM_SET_CLOCK_SOURCE HRTIM + * @{ + */ + +/** + * @brief Set High Resolution Timers Clock Source + * @rmtoll CFGR HRTIMSEL LL_RCC_SetHRTIMClockSource + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_HRTIM_CLKSOURCE_TIM + * @arg @ref LL_RCC_HRTIM_CLKSOURCE_CPU + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetHRTIMClockSource(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HRTIMSEL, Prescaler); +} +#endif /* HRTIM1 */ + +#if defined(HRTIM1) +/** + * @brief Get High Resolution Timers Clock Source + * @rmtoll CFGR HRTIMSEL LL_RCC_GetHRTIMClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_HRTIM_CLKSOURCE_TIM + * @arg @ref LL_RCC_HRTIM_CLKSOURCE_CPU + */ +__STATIC_INLINE uint32_t LL_RCC_GetHRTIMClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HRTIMSEL)); +} +/** + * @} + */ +#endif /* HRTIM1 */ + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Set the oscillator used as PLL clock source. + * @note PLLSRC can be written only when All PLLs are disabled. + * @rmtoll PLLCKSELR PLLSRC LL_RCC_PLL_SetSource + * @param PLLSource parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_CSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCKSELR PLLSRC LL_RCC_PLL_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_CSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_NONE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC)); +} + +/** + * @brief Enable PLL1 + * @rmtoll CR PLL1ON LL_RCC_PLL1_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL1ON); +} + +/** + * @brief Disable PLL1 + * @note Cannot be disabled if the PLL1 clock is used as the system clock + * @rmtoll CR PLL1ON LL_RCC_PLL1_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON); +} + +/** + * @brief Check if PLL1 Ready + * @rmtoll CR PLL1RDY LL_RCC_PLL1_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL1RDY) == (RCC_CR_PLL1RDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL1P + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVP1EN LL_RCC_PLL1P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP1EN); +} + +/** + * @brief Enable PLL1Q + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVQ1EN LL_RCC_PLL1Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ1EN); +} + +/** + * @brief Enable PLL1R + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVR1EN LL_RCC_PLL1R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR1EN); +} + +/** + * @brief Enable PLL1 FRACN + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN); +} + +/** + * @brief Check if PLL1 P is enabled + * @rmtoll PLLCFGR DIVP1EN LL_RCC_PLL1P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP1EN) == RCC_PLLCFGR_DIVP1EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 Q is enabled + * @rmtoll PLLCFGR DIVQ1EN LL_RCC_PLL1Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ1EN) == RCC_PLLCFGR_DIVQ1EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 R is enabled + * @rmtoll PLLCFGR DIVR1EN LL_RCC_PLL1R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR1EN) == RCC_PLLCFGR_DIVR1EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 FRACN is enabled + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) == RCC_PLLCFGR_PLL1FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL1P + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVP1EN LL_RCC_PLL1P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP1EN); +} + +/** + * @brief Disable PLL1Q + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVQ1EN LL_RCC_PLL1Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ1EN); +} + +/** + * @brief Disable PLL1R + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVR1EN LL_RCC_PLL1R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR1EN); +} + +/** + * @brief Disable PLL1 FRACN + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN); +} + +/** + * @brief Set PLL1 VCO OutputRange + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1VCOSEL LL_RCC_PLL1_SetVCOOuputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1VCOSEL, VCORange << RCC_PLLCFGR_PLL1VCOSEL_Pos); +} + +/** + * @brief Set PLL1 VCO Input Range + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1RGE LL_RCC_PLL1_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1RGE, InputRange << RCC_PLLCFGR_PLL1RGE_Pos); +} + +/** + * @brief Get PLL1 N Coefficient + * @rmtoll PLL1DIVR N1 LL_RCC_PLL1_GetN + * @retval A value between 4 and 512 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_N1) >> RCC_PLL1DIVR_N1_Pos) + 1UL); +} + +/** + * @brief Get PLL1 M Coefficient + * @rmtoll PLLCKSELR DIVM1 LL_RCC_PLL1_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos); +} + +/** + * @brief Get PLL1 P Coefficient + * @rmtoll PLL1DIVR P1 LL_RCC_PLL1_GetP + * @retval A value between 2 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_P1) >> RCC_PLL1DIVR_P1_Pos) + 1UL); +} + +/** + * @brief Get PLL1 Q Coefficient + * @rmtoll PLL1DIVR Q1 LL_RCC_PLL1_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_Q1) >> RCC_PLL1DIVR_Q1_Pos) + 1UL); +} + +/** + * @brief Get PLL1 R Coefficient + * @rmtoll PLL1DIVR R1 LL_RCC_PLL1_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_R1) >> RCC_PLL1DIVR_R1_Pos) + 1UL); +} + +/** + * @brief Get PLL1 FRACN Coefficient + * @rmtoll PLL1FRACR FRACN1 LL_RCC_PLL1_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN1) >> RCC_PLL1FRACR_FRACN1_Pos); +} + +/** + * @brief Set PLL1 N Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR N1 LL_RCC_PLL1_SetN + * @param N parameter can be a value between 4 and 512 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_N1, (N - 1UL) << RCC_PLL1DIVR_N1_Pos); +} + +/** + * @brief Set PLL1 M Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCKSELR DIVM1 LL_RCC_PLL1_SetM + * @param M parameter can be a value between 0 and 63 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM1, M << RCC_PLLCKSELR_DIVM1_Pos); +} + +/** + * @brief Set PLL1 P Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR P1 LL_RCC_PLL1_SetP + * @param P parameter can be a value between 2 (or 1*) and 128 (ODD division factor not supported) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines. + */ +__STATIC_INLINE void LL_RCC_PLL1_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_P1, (P - 1UL) << RCC_PLL1DIVR_P1_Pos); +} + +/** + * @brief Set PLL1 Q Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR Q1 LL_RCC_PLL1_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_Q1, (Q - 1UL) << RCC_PLL1DIVR_Q1_Pos); +} + +/** + * @brief Set PLL1 R Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR R1 LL_RCC_PLL1_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_R1, (R - 1UL) << RCC_PLL1DIVR_R1_Pos); +} + +/** + * @brief Set PLL1 FRACN Coefficient + * @rmtoll PLL1FRACR FRACN1 LL_RCC_PLL1_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL1_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN1, FRACN << RCC_PLL1FRACR_FRACN1_Pos); +} + +/** + * @brief Enable PLL2 + * @rmtoll CR PLL2ON LL_RCC_PLL2_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL2ON); +} + +/** + * @brief Disable PLL2 + * @note Cannot be disabled if the PLL2 clock is used as the system clock + * @rmtoll CR PLL2ON LL_RCC_PLL2_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); +} + +/** + * @brief Check if PLL2 Ready + * @rmtoll CR PLL2RDY LL_RCC_PLL2_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL2RDY) == (RCC_CR_PLL2RDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL2P + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVP2EN LL_RCC_PLL2P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP2EN); +} + +/** + * @brief Enable PLL2Q + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVQ2EN LL_RCC_PLL2Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ2EN); +} + +/** + * @brief Enable PLL2R + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVR2EN LL_RCC_PLL2R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR2EN); +} + +/** + * @brief Enable PLL2 FRACN + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN); +} + +/** + * @brief Check if PLL2 P is enabled + * @rmtoll PLLCFGR DIVP2EN LL_RCC_PLL2P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP2EN) == RCC_PLLCFGR_DIVP2EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 Q is enabled + * @rmtoll PLLCFGR DIVQ2EN LL_RCC_PLL2Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ2EN) == RCC_PLLCFGR_DIVQ2EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 R is enabled + * @rmtoll PLLCFGR DIVR2EN LL_RCC_PLL2R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR2EN) == RCC_PLLCFGR_DIVR2EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 FRACN is enabled + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) == RCC_PLLCFGR_PLL2FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL2P + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVP2EN LL_RCC_PLL2P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP2EN); +} + +/** + * @brief Disable PLL2Q + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVQ2EN LL_RCC_PLL2Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ2EN); +} + +/** + * @brief Disable PLL2R + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVR2EN LL_RCC_PLL2R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR2EN); +} + +/** + * @brief Disable PLL2 FRACN + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN); +} + +/** + * @brief Set PLL2 VCO OutputRange + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2VCOSEL LL_RCC_PLL2_SetVCOOuputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2VCOSEL, VCORange << RCC_PLLCFGR_PLL2VCOSEL_Pos); +} + +/** + * @brief Set PLL2 VCO Input Range + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2RGE LL_RCC_PLL2_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2RGE, InputRange << RCC_PLLCFGR_PLL2RGE_Pos); +} + +/** + * @brief Get PLL2 N Coefficient + * @rmtoll PLL2DIVR N2 LL_RCC_PLL2_GetN + * @retval A value between 4 and 512 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_N2) >> RCC_PLL2DIVR_N2_Pos) + 1UL); +} + +/** + * @brief Get PLL2 M Coefficient + * @rmtoll PLLCKSELR DIVM2 LL_RCC_PLL2_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM2) >> RCC_PLLCKSELR_DIVM2_Pos); +} + +/** + * @brief Get PLL2 P Coefficient + * @rmtoll PLL2DIVR P2 LL_RCC_PLL2_GetP + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_P2) >> RCC_PLL2DIVR_P2_Pos) + 1UL); +} + +/** + * @brief Get PLL2 Q Coefficient + * @rmtoll PLL2DIVR Q2 LL_RCC_PLL2_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_Q2) >> RCC_PLL2DIVR_Q2_Pos) + 1UL); +} + +/** + * @brief Get PLL2 R Coefficient + * @rmtoll PLL2DIVR R2 LL_RCC_PLL2_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_R2) >> RCC_PLL2DIVR_R2_Pos) + 1UL); +} + +/** + * @brief Get PLL2 FRACN Coefficient + * @rmtoll PLL2FRACR FRACN2 LL_RCC_PLL2_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN2) >> RCC_PLL2FRACR_FRACN2_Pos); +} + +/** + * @brief Set PLL2 N Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR N2 LL_RCC_PLL2_SetN + * @param N parameter can be a value between 4 and 512 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_N2, (N - 1UL) << RCC_PLL2DIVR_N2_Pos); +} + +/** + * @brief Set PLL2 M Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCKSELR DIVM2 LL_RCC_PLL2_SetM + * @param M parameter can be a value between 0 and 63 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM2, M << RCC_PLLCKSELR_DIVM2_Pos); +} + +/** + * @brief Set PLL2 P Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR P2 LL_RCC_PLL2_SetP + * @param P parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_P2, (P - 1UL) << RCC_PLL2DIVR_P2_Pos); +} + +/** + * @brief Set PLL2 Q Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR Q2 LL_RCC_PLL2_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_Q2, (Q - 1UL) << RCC_PLL2DIVR_Q2_Pos); +} + +/** + * @brief Set PLL2 R Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR R2 LL_RCC_PLL2_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_R2, (R - 1UL) << RCC_PLL2DIVR_R2_Pos); +} + +/** + * @brief Set PLL2 FRACN Coefficient + * @rmtoll PLL2FRACR FRACN2 LL_RCC_PLL2_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL2_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN2, FRACN << RCC_PLL2FRACR_FRACN2_Pos); +} + +/** + * @brief Enable PLL3 + * @rmtoll CR PLL3ON LL_RCC_PLL3_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL3ON); +} + +/** + * @brief Disable PLL3 + * @note Cannot be disabled if the PLL3 clock is used as the system clock + * @rmtoll CR PLL3ON LL_RCC_PLL3_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); +} + +/** + * @brief Check if PLL3 Ready + * @rmtoll CR PLL3RDY LL_RCC_PLL3_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL3RDY) == (RCC_CR_PLL3RDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL3P + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVP3EN LL_RCC_PLL3P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP3EN); +} + +/** + * @brief Enable PLL3Q + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVQ3EN LL_RCC_PLL3Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ3EN); +} + +/** + * @brief Enable PLL3R + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVR3EN LL_RCC_PLL3R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR3EN); +} + +/** + * @brief Enable PLL3 FRACN + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN); +} + +/** + * @brief Check if PLL3 P is enabled + * @rmtoll PLLCFGR DIVP3EN LL_RCC_PLL3P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP3EN) == RCC_PLLCFGR_DIVP3EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 Q is enabled + * @rmtoll PLLCFGR DIVQ3EN LL_RCC_PLL3Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ3EN) == RCC_PLLCFGR_DIVQ3EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 R is enabled + * @rmtoll PLLCFGR DIVR3EN LL_RCC_PLL3R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR3EN) == RCC_PLLCFGR_DIVR3EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 FRACN is enabled + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) == RCC_PLLCFGR_PLL3FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL3P + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVP2EN LL_RCC_PLL3P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP3EN); +} + +/** + * @brief Disable PLL3Q + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVQ3EN LL_RCC_PLL3Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ3EN); +} + +/** + * @brief Disable PLL3R + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVR3EN LL_RCC_PLL3R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR3EN); +} + +/** + * @brief Disable PLL3 FRACN + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN); +} + +/** + * @brief Set PLL3 VCO OutputRange + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3VCOSEL LL_RCC_PLL3_SetVCOOuputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3VCOSEL, VCORange << RCC_PLLCFGR_PLL3VCOSEL_Pos); +} + +/** + * @brief Set PLL3 VCO Input Range + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3RGE LL_RCC_PLL3_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3RGE, InputRange << RCC_PLLCFGR_PLL3RGE_Pos); +} + +/** + * @brief Get PLL3 N Coefficient + * @rmtoll PLL3DIVR N3 LL_RCC_PLL3_GetN + * @retval A value between 4 and 512 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_N3) >> RCC_PLL3DIVR_N3_Pos) + 1UL); +} + +/** + * @brief Get PLL3 M Coefficient + * @rmtoll PLLCKSELR DIVM3 LL_RCC_PLL3_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM3) >> RCC_PLLCKSELR_DIVM3_Pos); +} + +/** + * @brief Get PLL3 P Coefficient + * @rmtoll PLL3DIVR P3 LL_RCC_PLL3_GetP + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_P3) >> RCC_PLL3DIVR_P3_Pos) + 1UL); +} + +/** + * @brief Get PLL3 Q Coefficient + * @rmtoll PLL3DIVR Q3 LL_RCC_PLL3_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_Q3) >> RCC_PLL3DIVR_Q3_Pos) + 1UL); +} + +/** + * @brief Get PLL3 R Coefficient + * @rmtoll PLL3DIVR R3 LL_RCC_PLL3_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_R3) >> RCC_PLL3DIVR_R3_Pos) + 1UL); +} + +/** + * @brief Get PLL3 FRACN Coefficient + * @rmtoll PLL3FRACR FRACN3 LL_RCC_PLL3_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN3) >> RCC_PLL3FRACR_FRACN3_Pos); +} + +/** + * @brief Set PLL3 N Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR N3 LL_RCC_PLL3_SetN + * @param N parameter can be a value between 4 and 512 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_N3, (N - 1UL) << RCC_PLL3DIVR_N3_Pos); +} + +/** + * @brief Set PLL3 M Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCKSELR DIVM3 LL_RCC_PLL3_SetM + * @param M parameter can be a value between 0 and 63 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM3, M << RCC_PLLCKSELR_DIVM3_Pos); +} + +/** + * @brief Set PLL3 P Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR P3 LL_RCC_PLL3_SetP + * @param P parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_P3, (P - 1UL) << RCC_PLL3DIVR_P3_Pos); +} + +/** + * @brief Set PLL3 Q Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR Q3 LL_RCC_PLL3_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_Q3, (Q - 1UL) << RCC_PLL3DIVR_Q3_Pos); +} + +/** + * @brief Set PLL3 R Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR R3 LL_RCC_PLL3_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_R3, (R - 1UL) << RCC_PLL3DIVR_R3_Pos); +} + +/** + * @brief Set PLL3 FRACN Coefficient + * @rmtoll PLL3FRACR FRACN3 LL_RCC_PLL3_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL3_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN3, FRACN << RCC_PLL3FRACR_FRACN3_Pos); +} + + +/** + * @} + */ + + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); +} + +/** + * @brief Clear CSI ready interrupt flag + * @rmtoll CICR CSIRDYC LL_RCC_ClearFlag_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_CSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_CSIRDYC); +} + +/** + * @brief Clear HSI48 ready interrupt flag + * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); +} + +/** + * @brief Clear PLL1 ready interrupt flag + * @rmtoll CICR PLL1RDYC LL_RCC_ClearFlag_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL1RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC); +} + +/** + * @brief Clear PLL2 ready interrupt flag + * @rmtoll CICR PLL2RDYC LL_RCC_ClearFlag_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL2RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLL2RDYC); +} + +/** + * @brief Clear PLL3 ready interrupt flag + * @rmtoll CICR PLL3RDYC LL_RCC_ClearFlag_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL3RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLL3RDYC); +} + +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSECSSC); +} + +/** + * @brief Clear HSE Clock security system interrupt flag + * @rmtoll CICR HSECSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSECSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if CSI ready interrupt occurred or not + * @rmtoll CIFR CSIRDYF LL_RCC_IsActiveFlag_CSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSIRDYF) == (RCC_CIFR_CSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI48 ready interrupt occurred or not + * @rmtoll CIFR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 ready interrupt occurred or not + * @rmtoll CIFR PLLRDYF LL_RCC_IsActiveFlag_PLL1RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL1RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == (RCC_CIFR_PLLRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 ready interrupt occurred or not + * @rmtoll CIFR PLL2RDYF LL_RCC_IsActiveFlag_PLL2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL2RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL2RDYF) == (RCC_CIFR_PLL2RDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 ready interrupt occurred or not + * @rmtoll CIFR PLL3RDYF LL_RCC_IsActiveFlag_PLL3RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL3RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL3RDYF) == (RCC_CIFR_PLL3RDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == (RCC_CIFR_LSECSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE Clock security system interrupt occurred or not + * @rmtoll CIFR HSECSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSECSSF) == (RCC_CIFR_HSECSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Low Power D1 reset is set or not. + * @rmtoll RSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST (*)\n + * RSR LPWR1RSTF LL_RCC_IsActiveFlag_LPWRRST (**) + * + * (*) Only available for single core devices + * (**) Only available for Dual core devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ +#if defined(DUAL_CORE) + return ((READ_BIT(RCC->RSR, RCC_RSR_LPWR1RSTF) == (RCC_RSR_LPWR1RSTF)) ? 1UL : 0UL); +#else + return ((READ_BIT(RCC->RSR, RCC_RSR_LPWRRSTF) == (RCC_RSR_LPWRRSTF)) ? 1UL : 0UL); +#endif /*DUAL_CORE*/ +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag Low Power D2 reset is set or not. + * @rmtoll RSR LPWR2RSTF LL_RCC_IsActiveFlag_LPWR2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWR2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_LPWR2RSTF) == (RCC_RSR_LPWR2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Check if RCC flag Window Watchdog 1 reset is set or not. + * @rmtoll RSR WWDG1RSTF LL_RCC_IsActiveFlag_WWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDG1RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_WWDG1RSTF) == (RCC_RSR_WWDG1RSTF)) ? 1UL : 0UL); +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag Window Watchdog 2 reset is set or not. + * @rmtoll RSR WWDG2RSTF LL_RCC_IsActiveFlag_WWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDG2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_WWDG2RSTF) == (RCC_RSR_WWDG2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Check if RCC flag Independent Watchdog 1 reset is set or not. + * @rmtoll RSR IWDG1RSTF LL_RCC_IsActiveFlag_IWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDG1RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_IWDG1RSTF) == (RCC_RSR_IWDG1RSTF)) ? 1UL : 0UL); +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag Independent Watchdog 2 reset is set or not. + * @rmtoll RSR IWDG2RSTF LL_RCC_IsActiveFlag_IWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDG2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_IWDG2RSTF) == (RCC_RSR_IWDG2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll RSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST (*)\n + * RSR SFT1RSTF LL_RCC_IsActiveFlag_SFTRST (**) + * + * (*) Only available for single core devices + * (**) Only available for Dual core devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ +#if defined(DUAL_CORE) + return ((READ_BIT(RCC->RSR, RCC_RSR_SFT1RSTF) == (RCC_RSR_SFT1RSTF)) ? 1UL : 0UL); +#else + return ((READ_BIT(RCC->RSR, RCC_RSR_SFTRSTF) == (RCC_RSR_SFTRSTF)) ? 1UL : 0UL); +#endif /*DUAL_CORE*/ +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll RSR SFT2RSTF LL_RCC_IsActiveFlag_SFT2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFT2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_SFT2RSTF) == (RCC_RSR_SFT2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Check if RCC flag POR/PDR reset is set or not. + * @rmtoll RSR PORRSTF LL_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_PORRSTF) == (RCC_RSR_PORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll RSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_PINRSTF) == (RCC_RSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag BOR reset is set or not. + * @rmtoll RSR BORRSTF LL_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_BORRSTF) == (RCC_RSR_BORRSTF)) ? 1UL : 0UL); +} + +#if defined(RCC_RSR_D1RSTF) +/** + * @brief Check if RCC flag D1 reset is set or not. + * @rmtoll RSR D1RSTF LL_RCC_IsActiveFlag_D1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_D1RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_D1RSTF) == (RCC_RSR_D1RSTF)) ? 1UL : 0UL); +} +#endif /* RCC_RSR_D1RSTF */ + +#if defined(RCC_RSR_CDRSTF) +/** + * @brief Check if RCC flag CD reset is set or not. + * @rmtoll RSR CDRSTF LL_RCC_IsActiveFlag_CDRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CDRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_CDRSTF) == (RCC_RSR_CDRSTF)) ? 1UL : 0UL); +} +#endif /* RCC_RSR_CDRSTF */ + +#if defined(RCC_RSR_D2RSTF) +/** + * @brief Check if RCC flag D2 reset is set or not. + * @rmtoll RSR D2RSTF LL_RCC_IsActiveFlag_D2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_D2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_D2RSTF) == (RCC_RSR_D2RSTF)) ? 1UL : 0UL); +} +#endif /* RCC_RSR_D2RSTF */ + +#if defined(RCC_RSR_C1RSTF) || defined(RCC_RSR_CPURSTF) +/** + * @brief Check if RCC flag CPU reset is set or not. + * @rmtoll RSR CPURSTF LL_RCC_IsActiveFlag_CPURST (*)\n + * RSR C1RSTF LL_RCC_IsActiveFlag_CPURST (**) + * + * (*) Only available for single core devices + * (**) Only available for Dual core devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CPURST(void) +{ +#if defined(DUAL_CORE) + return ((READ_BIT(RCC->RSR, RCC_RSR_C1RSTF) == (RCC_RSR_C1RSTF)) ? 1UL : 0UL); +#else + return ((READ_BIT(RCC->RSR, RCC_RSR_CPURSTF) == (RCC_RSR_CPURSTF)) ? 1UL : 0UL); +#endif/*DUAL_CORE*/ +} +#endif /* defined(RCC_RSR_C1RSTF) || defined(RCC_RSR_CPURSTF) */ + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag CPU2 reset is set or not. + * @rmtoll RSR C2RSTF LL_RCC_IsActiveFlag_CPU2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CPU2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_C2RSTF) == (RCC_RSR_C2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Set RMVF bit to clear all reset flags. + * @rmtoll RSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->RSR, RCC_RSR_RMVF); +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC_C1 flag Low Power D1 reset is set or not. + * @rmtoll RSR LPWR1RSTF LL_C1_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_LPWR1RSTF) == (RCC_RSR_LPWR1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Low Power D2 reset is set or not. + * @rmtoll RSR LPWR2RSTF LL_C1_RCC_IsActiveFlag_LPWR2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_LPWR2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_LPWR2RSTF) == (RCC_RSR_LPWR2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Window Watchdog 1 reset is set or not. + * @rmtoll RSR WWDG1RSTF LL_C1_RCC_IsActiveFlag_WWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_WWDG1RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_WWDG1RSTF) == (RCC_RSR_WWDG1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Window Watchdog 2 reset is set or not. + * @rmtoll RSR WWDG2RSTF LL_C1_RCC_IsActiveFlag_WWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_WWDG2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_WWDG2RSTF) == (RCC_RSR_WWDG2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Independent Watchdog 1 reset is set or not. + * @rmtoll RSR IWDG1RSTF LL_C1_RCC_IsActiveFlag_IWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_IWDG1RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_IWDG1RSTF) == (RCC_RSR_IWDG1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Independent Watchdog 2 reset is set or not. + * @rmtoll RSR IWDG2RSTF LL_C1_RCC_IsActiveFlag_IWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_IWDG2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_IWDG2RSTF) == (RCC_RSR_IWDG2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Software reset is set or not. + * @rmtoll RSR SFT1RSTF LL_C1_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_SFT1RSTF) == (RCC_RSR_SFT1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Software reset is set or not. + * @rmtoll RSR SFT2RSTF LL_C1_RCC_IsActiveFlag_SFT2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_SFT2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_SFT2RSTF) == (RCC_RSR_SFT2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag POR/PDR reset is set or not. + * @rmtoll RSR PORRSTF LL_C1_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_PORRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_PORRSTF) == (RCC_RSR_PORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Pin reset is set or not. + * @rmtoll RSR PINRSTF LL_C1_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_PINRSTF) == (RCC_RSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag BOR reset is set or not. + * @rmtoll RSR BORRSTF LL_C1_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_BORRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_BORRSTF) == (RCC_RSR_BORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag D1 reset is set or not. + * @rmtoll RSR D1RSTF LL_C1_RCC_IsActiveFlag_D1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_D1RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_D1RSTF) == (RCC_RSR_D1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag D2 reset is set or not. + * @rmtoll RSR D2RSTF LL_C1_RCC_IsActiveFlag_D2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_D2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_D2RSTF) == (RCC_RSR_D2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag CPU reset is set or not. + * @rmtoll RSR C1RSTF LL_C1_RCC_IsActiveFlag_CPURST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_CPURST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_C1RSTF) == (RCC_RSR_C1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag CPU2 reset is set or not. + * @rmtoll RSR C2RSTF LL_C1_RCC_IsActiveFlag_CPU2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_CPU2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_C2RSTF) == (RCC_RSR_C2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll RSR RMVF LL_C1_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_C1_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC_C1->RSR, RCC_RSR_RMVF); +} + +/** + * @brief Check if RCC_C2 flag Low Power D1 reset is set or not. + * @rmtoll RSR LPWR1RSTF LL_C2_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_LPWR1RSTF) == (RCC_RSR_LPWR1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Low Power D2 reset is set or not. + * @rmtoll RSR LPWR2RSTF LL_C2_RCC_IsActiveFlag_LPWR2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_LPWR2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_LPWR2RSTF) == (RCC_RSR_LPWR2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Window Watchdog 1 reset is set or not. + * @rmtoll RSR WWDG1RSTF LL_C2_RCC_IsActiveFlag_WWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_WWDG1RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_WWDG1RSTF) == (RCC_RSR_WWDG1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Window Watchdog 2 reset is set or not. + * @rmtoll RSR WWDG2RSTF LL_C2_RCC_IsActiveFlag_WWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_WWDG2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_WWDG2RSTF) == (RCC_RSR_WWDG2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Independent Watchdog 1 reset is set or not. + * @rmtoll RSR IWDG1RSTF LL_C2_RCC_IsActiveFlag_IWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_IWDG1RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_IWDG1RSTF) == (RCC_RSR_IWDG1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Independent Watchdog 2 reset is set or not. + * @rmtoll RSR IWDG2RSTF LL_C2_RCC_IsActiveFlag_IWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_IWDG2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_IWDG2RSTF) == (RCC_RSR_IWDG2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Software reset is set or not. + * @rmtoll RSR SFT1RSTF LL_C2_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_SFT1RSTF) == (RCC_RSR_SFT1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Software reset is set or not. + * @rmtoll RSR SFT2RSTF LL_C2_RCC_IsActiveFlag_SFT2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_SFT2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_SFT2RSTF) == (RCC_RSR_SFT2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag POR/PDR reset is set or not. + * @rmtoll RSR PORRSTF LL_C2_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_PORRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_PORRSTF) == (RCC_RSR_PORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Pin reset is set or not. + * @rmtoll RSR PINRSTF LL_C2_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_PINRSTF) == (RCC_RSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag BOR reset is set or not. + * @rmtoll RSR BORRSTF LL_C2_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_BORRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_BORRSTF) == (RCC_RSR_BORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag D1 reset is set or not. + * @rmtoll RSR D1RSTF LL_C2_RCC_IsActiveFlag_D1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_D1RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_D1RSTF) == (RCC_RSR_D1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag D2 reset is set or not. + * @rmtoll RSR D2RSTF LL_C2_RCC_IsActiveFlag_D2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_D2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_D2RSTF) == (RCC_RSR_D2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag CPU reset is set or not. + * @rmtoll RSR C1RSTF LL_C2_RCC_IsActiveFlag_CPURST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_CPURST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_C1RSTF) == (RCC_RSR_C1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag CPU2 reset is set or not. + * @rmtoll RSR C2RSTF LL_C2_RCC_IsActiveFlag_CPU2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_CPU2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_C2RSTF) == (RCC_RSR_C2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll RSR RMVF LL_C2_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_C2_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC_C2->RSR, RCC_RSR_RMVF); +} +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Enable CSI ready interrupt + * @rmtoll CIER CSIRDYIE LL_RCC_EnableIT_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_CSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_CSIRDYIE); +} + +/** + * @brief Enable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} + +/** + * @brief Enable PLL1 ready interrupt + * @rmtoll CIER PLL1RDYIE LL_RCC_EnableIT_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL1RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE); +} + +/** + * @brief Enable PLL2 ready interrupt + * @rmtoll CIER PLL2RDYIE LL_RCC_EnableIT_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL2RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE); +} + +/** + * @brief Enable PLL3 ready interrupt + * @rmtoll CIER PLL3RDYIE LL_RCC_EnableIT_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL3RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE); +} + +/** + * @brief Enable LSECSS interrupt + * @rmtoll CIER LSECSSIE LL_RCC_EnableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSECSS(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSECSSIE); +} + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable CSI ready interrupt + * @rmtoll CIER CSIRDYIE LL_RCC_DisableIT_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_CSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_CSIRDYIE); +} + +/** + * @brief Disable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} + +/** + * @brief Disable PLL1 ready interrupt + * @rmtoll CIER PLL1RDYIE LL_RCC_DisableIT_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL1RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE); +} + +/** + * @brief Disable PLL2 ready interrupt + * @rmtoll CIER PLL2RDYIE LL_RCC_DisableIT_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL2RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE); +} + +/** + * @brief Disable PLL3 ready interrupt + * @rmtoll CIER PLL3RDYIE LL_RCC_DisableIT_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL3RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE); +} + +/** + * @brief Disable LSECSS interrupt + * @rmtoll CIER LSECSSIE LL_RCC_DisableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSECSS(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSECSSIE); +} + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnableIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == RCC_CIER_LSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnableIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == RCC_CIER_LSERDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnableIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == RCC_CIER_HSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnableIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == RCC_CIER_HSERDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if CSI ready interrupt source is enabled or disabled. + * @rmtoll CIER CSIRDYIE LL_RCC_IsEnableIT_CSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_CSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_CSIRDYIE) == RCC_CIER_CSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI48 ready interrupt source is enabled or disabled. + * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnableIT_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == RCC_CIER_HSI48RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL1 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL1RDYIE LL_RCC_IsEnableIT_PLL1RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL1RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE) == RCC_CIER_PLL1RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL2 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL2RDYIE LL_RCC_IsEnableIT_PLL2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL2RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE) == RCC_CIER_PLL2RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL3 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL3RDYIE LL_RCC_IsEnableIT_PLL3RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL3RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE) == RCC_CIER_PLL3RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSECSS interrupt source is enabled or disabled. + * @rmtoll CIER LSECSSIE LL_RCC_IsEnableIT_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSECSS(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSECSSIE) == RCC_CIER_LSECSSIE) ? 1UL : 0UL); +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +void LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +uint32_t LL_RCC_CalcPLLClockFreq(uint32_t PLLInputFreq, uint32_t M, uint32_t N, uint32_t FRACN, uint32_t PQR); + +void LL_RCC_GetPLL1ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetPLL2ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetPLL3ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); + +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource); +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource); +#if defined(DFSDM2_BASE) +uint32_t LL_RCC_GetDFSDM2ClockFreq(uint32_t DFSDMxSource); +#endif /* DFSDM2_BASE */ +#if defined(DSI) +uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource); +#endif /* DSI */ +uint32_t LL_RCC_GetSPDIFClockFreq(uint32_t SPDIFxSource); +uint32_t LL_RCC_GetSPIClockFreq(uint32_t SPIxSource); +uint32_t LL_RCC_GetSWPClockFreq(uint32_t SWPxSource); +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource); +uint32_t LL_RCC_GetFMCClockFreq(uint32_t FMCxSource); +#if defined(QUADSPI) +uint32_t LL_RCC_GetQSPIClockFreq(uint32_t QSPIxSource); +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) +uint32_t LL_RCC_GetOSPIClockFreq(uint32_t OSPIxSource); +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ +uint32_t LL_RCC_GetCLKPClockFreq(uint32_t CLKPxSource); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + + +/** + * @} + */ +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_RCC_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_sdmmc.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_sdmmc.h new file mode 100644 index 0000000..6e12084 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_sdmmc.h @@ -0,0 +1,1117 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_sdmmc.h + * @author MCD Application Team + * @brief Header file of SDMMC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_SDMMC_H +#define STM32H7xx_LL_SDMMC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_Driver + * @{ + */ + +/** @addtogroup SDMMC_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types + * @{ + */ + +/** + * @brief SDMMC Configuration Structure definition + */ +typedef struct +{ + uint32_t ClockEdge; /*!< Specifies the SDMMC_CCK clock transition on which Data and Command change. + This parameter can be a value of @ref SDMMC_LL_Clock_Edge */ + + uint32_t ClockPowerSave; /*!< Specifies whether SDMMC Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDMMC_LL_Clock_Power_Save */ + + uint32_t BusWide; /*!< Specifies the SDMMC bus width. + This parameter can be a value of @ref SDMMC_LL_Bus_Wide */ + + uint32_t HardwareFlowControl; /*!< Specifies whether the SDMMC hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_Hardware_Flow_Control */ + + uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDMMC controller. + This parameter can be a value between Min_Data = 0 and Max_Data = 1023 */ + +#if (USE_SD_TRANSCEIVER != 0U) + uint32_t TranceiverPresent; /*!< Specifies if there is a 1V8 Transceiver/Switcher. + This parameter can be a value of @ref SDMMC_LL_TRANSCEIVER_PRESENT */ +#endif /* USE_SD_TRANSCEIVER */ +} SDMMC_InitTypeDef; + + +/** + * @brief SDMMC Command Control structure + */ +typedef struct +{ + uint32_t Argument; /*!< Specifies the SDMMC command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register. */ + + uint32_t CmdIndex; /*!< Specifies the SDMMC command index. It must be Min_Data = 0 and + Max_Data = 64 */ + + uint32_t Response; /*!< Specifies the SDMMC response type. + This parameter can be a value of @ref SDMMC_LL_Response_Type */ + + uint32_t WaitForInterrupt; /*!< Specifies whether SDMMC wait for interrupt request is + enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_Wait_Interrupt_State */ + + uint32_t CPSM; /*!< Specifies whether SDMMC Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_CPSM_State */ +} SDMMC_CmdInitTypeDef; + + +/** + * @brief SDMMC Data Control structure + */ +typedef struct +{ + uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDMMC_LL_Data_Block_Size */ + + uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDMMC_LL_Transfer_Direction */ + + uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDMMC_LL_Transfer_Type */ + + uint32_t DPSM; /*!< Specifies whether SDMMC Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDMMC_LL_DPSM_State */ +} SDMMC_DataInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants + * @{ + */ +#define SDMMC_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define SDMMC_ERROR_CMD_CRC_FAIL ((uint32_t)0x00000001U) /*!< Command response received (but CRC check failed) */ +#define SDMMC_ERROR_DATA_CRC_FAIL ((uint32_t)0x00000002U) /*!< Data block sent/received (CRC check failed) */ +#define SDMMC_ERROR_CMD_RSP_TIMEOUT ((uint32_t)0x00000004U) /*!< Command response timeout */ +#define SDMMC_ERROR_DATA_TIMEOUT ((uint32_t)0x00000008U) /*!< Data timeout */ +#define SDMMC_ERROR_TX_UNDERRUN ((uint32_t)0x00000010U) /*!< Transmit FIFO underrun */ +#define SDMMC_ERROR_RX_OVERRUN ((uint32_t)0x00000020U) /*!< Receive FIFO overrun */ +#define SDMMC_ERROR_ADDR_MISALIGNED ((uint32_t)0x00000040U) /*!< Misaligned address */ +#define SDMMC_ERROR_BLOCK_LEN_ERR ((uint32_t)0x00000080U) /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ +#define SDMMC_ERROR_ERASE_SEQ_ERR ((uint32_t)0x00000100U) /*!< An error in the sequence of erase command occurs */ +#define SDMMC_ERROR_BAD_ERASE_PARAM ((uint32_t)0x00000200U) /*!< An invalid selection for erase groups */ +#define SDMMC_ERROR_WRITE_PROT_VIOLATION ((uint32_t)0x00000400U) /*!< Attempt to program a write protect block */ +#define SDMMC_ERROR_LOCK_UNLOCK_FAILED ((uint32_t)0x00000800U) /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ +#define SDMMC_ERROR_COM_CRC_FAILED ((uint32_t)0x00001000U) /*!< CRC check of the previous command failed */ +#define SDMMC_ERROR_ILLEGAL_CMD ((uint32_t)0x00002000U) /*!< Command is not legal for the card state */ +#define SDMMC_ERROR_CARD_ECC_FAILED ((uint32_t)0x00004000U) /*!< Card internal ECC was applied but failed to correct the data */ +#define SDMMC_ERROR_CC_ERR ((uint32_t)0x00008000U) /*!< Internal card controller error */ +#define SDMMC_ERROR_GENERAL_UNKNOWN_ERR ((uint32_t)0x00010000U) /*!< General or unknown error */ +#define SDMMC_ERROR_STREAM_READ_UNDERRUN ((uint32_t)0x00020000U) /*!< The card could not sustain data reading in stream rmode */ +#define SDMMC_ERROR_STREAM_WRITE_OVERRUN ((uint32_t)0x00040000U) /*!< The card could not sustain data programming in stream mode */ +#define SDMMC_ERROR_CID_CSD_OVERWRITE ((uint32_t)0x00080000U) /*!< CID/CSD overwrite error */ +#define SDMMC_ERROR_WP_ERASE_SKIP ((uint32_t)0x00100000U) /*!< Only partial address space was erased */ +#define SDMMC_ERROR_CARD_ECC_DISABLED ((uint32_t)0x00200000U) /*!< Command has been executed without using internal ECC */ +#define SDMMC_ERROR_ERASE_RESET ((uint32_t)0x00400000U) /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ +#define SDMMC_ERROR_AKE_SEQ_ERR ((uint32_t)0x00800000U) /*!< Error in sequence of authentication */ +#define SDMMC_ERROR_INVALID_VOLTRANGE ((uint32_t)0x01000000U) /*!< Error in case of invalid voltage range */ +#define SDMMC_ERROR_ADDR_OUT_OF_RANGE ((uint32_t)0x02000000U) /*!< Error when addressed block is out of range */ +#define SDMMC_ERROR_REQUEST_NOT_APPLICABLE ((uint32_t)0x04000000U) /*!< Error when command request is not applicable */ +#define SDMMC_ERROR_INVALID_PARAMETER ((uint32_t)0x08000000U) /*!< the used parameter is not valid */ +#define SDMMC_ERROR_UNSUPPORTED_FEATURE ((uint32_t)0x10000000U) /*!< Error when feature is not insupported */ +#define SDMMC_ERROR_BUSY ((uint32_t)0x20000000U) /*!< Error when transfer process is busy */ +#define SDMMC_ERROR_DMA ((uint32_t)0x40000000U) /*!< Error while DMA transfer */ +#define SDMMC_ERROR_TIMEOUT ((uint32_t)0x80000000U) /*!< Timeout error */ + +/** + * @brief SDMMC Commands Index + */ +#define SDMMC_CMD_GO_IDLE_STATE ((uint8_t)0U) /*!< Resets the SD memory card. */ +#define SDMMC_CMD_SEND_OP_COND ((uint8_t)1U) /*!< Sends host capacity support information and activates the card's initialization process. */ +#define SDMMC_CMD_ALL_SEND_CID ((uint8_t)2U) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ +#define SDMMC_CMD_SET_REL_ADDR ((uint8_t)3U) /*!< Asks the card to publish a new relative address (RCA). */ +#define SDMMC_CMD_SET_DSR ((uint8_t)4U) /*!< Programs the DSR of all cards. */ +#define SDMMC_CMD_SDMMC_SEN_OP_COND ((uint8_t)5U) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line.*/ +#define SDMMC_CMD_HS_SWITCH ((uint8_t)6U) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ +#define SDMMC_CMD_SEL_DESEL_CARD ((uint8_t)7U) /*!< Selects the card by its own relative address and gets deselected by any other address */ +#define SDMMC_CMD_HS_SEND_EXT_CSD ((uint8_t)8U) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information and asks the card whether card supports voltage. */ +#define SDMMC_CMD_SEND_CSD ((uint8_t)9U) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ +#define SDMMC_CMD_SEND_CID ((uint8_t)10U) /*!< Addressed card sends its card identification (CID) on the CMD line. */ +#define SDMMC_CMD_VOLTAGE_SWITCH ((uint8_t)11U) /*!< SD card Voltage switch to 1.8V mode. */ +#define SDMMC_CMD_STOP_TRANSMISSION ((uint8_t)12U) /*!< Forces the card to stop transmission. */ +#define SDMMC_CMD_SEND_STATUS ((uint8_t)13U) /*!< Addressed card sends its status register. */ +#define SDMMC_CMD_HS_BUSTEST_READ ((uint8_t)14U) /*!< Reserved */ +#define SDMMC_CMD_GO_INACTIVE_STATE ((uint8_t)15U) /*!< Sends an addressed card into the inactive state. */ +#define SDMMC_CMD_SET_BLOCKLEN ((uint8_t)16U) /*!< Sets the block length (in bytes for SDSC) for all following block commands (read, write, lock). Default block length is fixed to 512 Bytes. Not effective */ +/*!< for SDHS and SDXC. */ +#define SDMMC_CMD_READ_SINGLE_BLOCK ((uint8_t)17U) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */ +#define SDMMC_CMD_READ_MULT_BLOCK ((uint8_t)18U) /*!< Continuously transfers data blocks from card to host until interrupted by STOP_TRANSMISSION command. */ +#define SDMMC_CMD_HS_BUSTEST_WRITE ((uint8_t)19U) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ +#define SDMMC_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20U) /*!< Speed class control command. */ +#define SDMMC_CMD_SET_BLOCK_COUNT ((uint8_t)23U) /*!< Specify block count for CMD18 and CMD25. */ +#define SDMMC_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24U) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */ +#define SDMMC_CMD_WRITE_MULT_BLOCK ((uint8_t)25U) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ +#define SDMMC_CMD_PROG_CID ((uint8_t)26U) /*!< Reserved for manufacturers. */ +#define SDMMC_CMD_PROG_CSD ((uint8_t)27U) /*!< Programming of the programmable bits of the CSD. */ +#define SDMMC_CMD_SET_WRITE_PROT ((uint8_t)28U) /*!< Sets the write protection bit of the addressed group. */ +#define SDMMC_CMD_CLR_WRITE_PROT ((uint8_t)29U) /*!< Clears the write protection bit of the addressed group. */ +#define SDMMC_CMD_SEND_WRITE_PROT ((uint8_t)30U) /*!< Asks the card to send the status of the write protection bits. */ +#define SDMMC_CMD_SD_ERASE_GRP_START ((uint8_t)32U) /*!< Sets the address of the first write block to be erased. (For SD card only). */ +#define SDMMC_CMD_SD_ERASE_GRP_END ((uint8_t)33U) /*!< Sets the address of the last write block of the continuous range to be erased. */ +#define SDMMC_CMD_ERASE_GRP_START ((uint8_t)35U) /*!< Sets the address of the first write block to be erased. Reserved for each command system set by switch function command (CMD6). */ +#define SDMMC_CMD_ERASE_GRP_END ((uint8_t)36U) /*!< Sets the address of the last write block of the continuous range to be erased. Reserved for each command system set by switch function command (CMD6). */ +#define SDMMC_CMD_ERASE ((uint8_t)38U) /*!< Reserved for SD security applications. */ +#define SDMMC_CMD_FAST_IO ((uint8_t)39U) /*!< SD card doesn't support it (Reserved). */ +#define SDMMC_CMD_GO_IRQ_STATE ((uint8_t)40U) /*!< SD card doesn't support it (Reserved). */ +#define SDMMC_CMD_LOCK_UNLOCK ((uint8_t)42U) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by the SET_BLOCK_LEN command. */ +#define SDMMC_CMD_APP_CMD ((uint8_t)55U) /*!< Indicates to the card that the next command is an application specific command rather than a standard command. */ +#define SDMMC_CMD_GEN_CMD ((uint8_t)56U) /*!< Used either to transfer a data block to the card or to get a data block from the card for general purpose/application specific commands. */ +#define SDMMC_CMD_NO_CMD ((uint8_t)64U) /*!< No command */ + +/** + * @brief Following commands are SD Card Specific commands. + * SDMMC_APP_CMD should be sent before sending these commands. + */ +#define SDMMC_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6U) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus widths are given in SCR register. */ +#define SDMMC_CMD_SD_APP_STATUS ((uint8_t)13U) /*!< (ACMD13) Sends the SD status. */ +#define SDMMC_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22U) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with 32bit+CRC data block. */ +#define SDMMC_CMD_SD_APP_OP_COND ((uint8_t)41U) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line. */ +#define SDMMC_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42U) /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */ +#define SDMMC_CMD_SD_APP_SEND_SCR ((uint8_t)51U) /*!< Reads the SD Configuration Register (SCR). */ +#define SDMMC_CMD_SDMMC_RW_DIRECT ((uint8_t)52U) /*!< For SD I/O card only, reserved for security specification. */ +#define SDMMC_CMD_SDMMC_RW_EXTENDED ((uint8_t)53U) /*!< For SD I/O card only, reserved for security specification. */ + +/** + * @brief Following commands are MMC Specific commands. + */ +#define SDMMC_CMD_MMC_SLEEP_AWAKE ((uint8_t)5U) /*!< Toggle the device between Sleep state and Standby state. */ + +/** + * @brief Following commands are SD Card Specific security commands. + * SDMMC_CMD_APP_CMD should be sent before sending these commands. + */ +#define SDMMC_CMD_SD_APP_GET_MKB ((uint8_t)43U) +#define SDMMC_CMD_SD_APP_GET_MID ((uint8_t)44U) +#define SDMMC_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45U) +#define SDMMC_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46U) +#define SDMMC_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47U) +#define SDMMC_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48U) +#define SDMMC_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18U) +#define SDMMC_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25U) +#define SDMMC_CMD_SD_APP_SECURE_ERASE ((uint8_t)38U) +#define SDMMC_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49U) +#define SDMMC_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48U) + +/** + * @brief Masks for errors Card Status R1 (OCR Register) + */ +#define SDMMC_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000U) +#define SDMMC_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000U) +#define SDMMC_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000U) +#define SDMMC_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000U) +#define SDMMC_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000U) +#define SDMMC_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000U) +#define SDMMC_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000U) +#define SDMMC_OCR_COM_CRC_FAILED ((uint32_t)0x00800000U) +#define SDMMC_OCR_ILLEGAL_CMD ((uint32_t)0x00400000U) +#define SDMMC_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000U) +#define SDMMC_OCR_CC_ERROR ((uint32_t)0x00100000U) +#define SDMMC_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000U) +#define SDMMC_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000U) +#define SDMMC_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000U) +#define SDMMC_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000U) +#define SDMMC_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000U) +#define SDMMC_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000U) +#define SDMMC_OCR_ERASE_RESET ((uint32_t)0x00002000U) +#define SDMMC_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008U) +#define SDMMC_OCR_ERRORBITS ((uint32_t)0xFDFFE008U) + +/** + * @brief Masks for R6 Response + */ +#define SDMMC_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000U) +#define SDMMC_R6_ILLEGAL_CMD ((uint32_t)0x00004000U) +#define SDMMC_R6_COM_CRC_FAILED ((uint32_t)0x00008000U) + +#define SDMMC_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000U) +#define SDMMC_HIGH_CAPACITY ((uint32_t)0x40000000U) +#define SDMMC_STD_CAPACITY ((uint32_t)0x00000000U) +#define SDMMC_CHECK_PATTERN ((uint32_t)0x000001AAU) +#define SD_SWITCH_1_8V_CAPACITY ((uint32_t)0x01000000U) +#define SDMMC_DDR50_SWITCH_PATTERN ((uint32_t)0x80FFFF04U) +#define SDMMC_SDR104_SWITCH_PATTERN ((uint32_t)0x80FF1F03U) +#define SDMMC_SDR50_SWITCH_PATTERN ((uint32_t)0x80FF1F02U) +#define SDMMC_SDR25_SWITCH_PATTERN ((uint32_t)0x80FFFF01U) +#define SDMMC_SDR12_SWITCH_PATTERN ((uint32_t)0x80FFFF00U) + +#define SDMMC_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFFU) + +#define SDMMC_MAX_TRIAL ((uint32_t)0x0000FFFFU) + +#define SDMMC_ALLZERO ((uint32_t)0x00000000U) + +#define SDMMC_WIDE_BUS_SUPPORT ((uint32_t)0x00040000U) +#define SDMMC_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000U) +#define SDMMC_CARD_LOCKED ((uint32_t)0x02000000U) + +#ifndef SDMMC_DATATIMEOUT +#define SDMMC_DATATIMEOUT ((uint32_t)0xFFFFFFFFU) +#endif /* SDMMC_DATATIMEOUT */ +#define SDMMC_0TO7BITS ((uint32_t)0x000000FFU) +#define SDMMC_8TO15BITS ((uint32_t)0x0000FF00U) +#define SDMMC_16TO23BITS ((uint32_t)0x00FF0000U) +#define SDMMC_24TO31BITS ((uint32_t)0xFF000000U) +#define SDMMC_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFFU) + +#define SDMMC_HALFFIFO ((uint32_t)0x00000008U) +#define SDMMC_HALFFIFOBYTES ((uint32_t)0x00000020U) + +/** + * @brief Command Class supported + */ +#define SDMMC_CCCC_ERASE ((uint32_t)0x00000020U) + +#define SDMMC_CMDTIMEOUT ((uint32_t)5000U) /* Command send and response timeout */ +#define SDMMC_MAXERASETIMEOUT ((uint32_t)63000U) /* Max erase Timeout 63 s */ +#define SDMMC_STOPTRANSFERTIMEOUT ((uint32_t)100000000U) /* Timeout for STOP TRANSMISSION command */ + +/** @defgroup SDMMC_LL_Clock_Edge Clock Edge + * @{ + */ +#define SDMMC_CLOCK_EDGE_RISING ((uint32_t)0x00000000U) +#define SDMMC_CLOCK_EDGE_FALLING SDMMC_CLKCR_NEGEDGE + +#define IS_SDMMC_CLOCK_EDGE(EDGE) (((EDGE) == SDMMC_CLOCK_EDGE_RISING) || \ + ((EDGE) == SDMMC_CLOCK_EDGE_FALLING)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Clock_Power_Save Clock Power Saving + * @{ + */ +#define SDMMC_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000U) +#define SDMMC_CLOCK_POWER_SAVE_ENABLE SDMMC_CLKCR_PWRSAV + +#define IS_SDMMC_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDMMC_CLOCK_POWER_SAVE_DISABLE) || \ + ((SAVE) == SDMMC_CLOCK_POWER_SAVE_ENABLE)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Bus_Wide Bus Width + * @{ + */ +#define SDMMC_BUS_WIDE_1B ((uint32_t)0x00000000U) +#define SDMMC_BUS_WIDE_4B SDMMC_CLKCR_WIDBUS_0 +#define SDMMC_BUS_WIDE_8B SDMMC_CLKCR_WIDBUS_1 + +#define IS_SDMMC_BUS_WIDE(WIDE) (((WIDE) == SDMMC_BUS_WIDE_1B) || \ + ((WIDE) == SDMMC_BUS_WIDE_4B) || \ + ((WIDE) == SDMMC_BUS_WIDE_8B)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Speed_Mode + * @{ + */ +#define SDMMC_SPEED_MODE_AUTO ((uint32_t)0x00000000U) +#define SDMMC_SPEED_MODE_DEFAULT ((uint32_t)0x00000001U) +#define SDMMC_SPEED_MODE_HIGH ((uint32_t)0x00000002U) +#define SDMMC_SPEED_MODE_ULTRA ((uint32_t)0x00000003U) +#define SDMMC_SPEED_MODE_ULTRA_SDR104 SDMMC_SPEED_MODE_ULTRA +#define SDMMC_SPEED_MODE_DDR ((uint32_t)0x00000004U) +#define SDMMC_SPEED_MODE_ULTRA_SDR50 ((uint32_t)0x00000005U) + +#define IS_SDMMC_SPEED_MODE(MODE) (((MODE) == SDMMC_SPEED_MODE_AUTO) || \ + ((MODE) == SDMMC_SPEED_MODE_DEFAULT) || \ + ((MODE) == SDMMC_SPEED_MODE_HIGH) || \ + ((MODE) == SDMMC_SPEED_MODE_ULTRA) || \ + ((MODE) == SDMMC_SPEED_MODE_ULTRA_SDR50) || \ + ((MODE) == SDMMC_SPEED_MODE_DDR)) + +/** + * @} + */ + +/** @defgroup SDMMC_LL_Hardware_Flow_Control Hardware Flow Control + * @{ + */ +#define SDMMC_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000U) +#define SDMMC_HARDWARE_FLOW_CONTROL_ENABLE SDMMC_CLKCR_HWFC_EN + +#define IS_SDMMC_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDMMC_HARDWARE_FLOW_CONTROL_DISABLE) || \ + ((CONTROL) == SDMMC_HARDWARE_FLOW_CONTROL_ENABLE)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Clock_Division Clock Division + * @{ + */ +/* SDMMC_CK frequency = SDMMCCLK / [2 * CLKDIV] */ +#define IS_SDMMC_CLKDIV(DIV) ((DIV) < 0x400U) +/** + * @} + */ + +/** @defgroup SDMMC_LL_TRANSCEIVER_PRESENT Transceiver Present + * @{ + */ +#define SDMMC_TRANSCEIVER_UNKNOWN ((uint32_t)0x00000000U) +#define SDMMC_TRANSCEIVER_NOT_PRESENT ((uint32_t)0x00000001U) +#define SDMMC_TRANSCEIVER_PRESENT ((uint32_t)0x00000002U) + +/** + * @} + */ + +/** @defgroup SDMMC_LL_Command_Index Command Index + * @{ + */ +#define IS_SDMMC_CMD_INDEX(INDEX) ((INDEX) < 0x40U) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Response_Type Response Type + * @{ + */ +#define SDMMC_RESPONSE_NO ((uint32_t)0x00000000U) +#define SDMMC_RESPONSE_SHORT SDMMC_CMD_WAITRESP_0 +#define SDMMC_RESPONSE_LONG SDMMC_CMD_WAITRESP + +#define IS_SDMMC_RESPONSE(RESPONSE) (((RESPONSE) == SDMMC_RESPONSE_NO) || \ + ((RESPONSE) == SDMMC_RESPONSE_SHORT) || \ + ((RESPONSE) == SDMMC_RESPONSE_LONG)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Wait_Interrupt_State Wait Interrupt + * @{ + */ +#define SDMMC_WAIT_NO ((uint32_t)0x00000000U) +#define SDMMC_WAIT_IT SDMMC_CMD_WAITINT +#define SDMMC_WAIT_PEND SDMMC_CMD_WAITPEND + +#define IS_SDMMC_WAIT(WAIT) (((WAIT) == SDMMC_WAIT_NO) || \ + ((WAIT) == SDMMC_WAIT_IT) || \ + ((WAIT) == SDMMC_WAIT_PEND)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_CPSM_State CPSM State + * @{ + */ +#define SDMMC_CPSM_DISABLE ((uint32_t)0x00000000U) +#define SDMMC_CPSM_ENABLE SDMMC_CMD_CPSMEN + +#define IS_SDMMC_CPSM(CPSM) (((CPSM) == SDMMC_CPSM_DISABLE) || \ + ((CPSM) == SDMMC_CPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Response_Registers Response Register + * @{ + */ +#define SDMMC_RESP1 ((uint32_t)0x00000000U) +#define SDMMC_RESP2 ((uint32_t)0x00000004U) +#define SDMMC_RESP3 ((uint32_t)0x00000008U) +#define SDMMC_RESP4 ((uint32_t)0x0000000CU) + +#define IS_SDMMC_RESP(RESP) (((RESP) == SDMMC_RESP1) || \ + ((RESP) == SDMMC_RESP2) || \ + ((RESP) == SDMMC_RESP3) || \ + ((RESP) == SDMMC_RESP4)) + +/** @defgroup SDMMC_Internal_DMA_Mode SDMMC Internal DMA Mode + * @{ + */ +#define SDMMC_DISABLE_IDMA ((uint32_t)0x00000000) +#define SDMMC_ENABLE_IDMA_SINGLE_BUFF (SDMMC_IDMA_IDMAEN) +#define SDMMC_ENABLE_IDMA_DOUBLE_BUFF0 (SDMMC_IDMA_IDMAEN | SDMMC_IDMA_IDMABMODE) +#define SDMMC_ENABLE_IDMA_DOUBLE_BUFF1 (SDMMC_IDMA_IDMAEN | SDMMC_IDMA_IDMABMODE | SDMMC_IDMA_IDMABACT) + +/** + * @} + */ + +/** @defgroup SDMMC_LL_Data_Length Data Length + * @{ + */ +#define IS_SDMMC_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Data_Block_Size Data Block Size + * @{ + */ +#define SDMMC_DATABLOCK_SIZE_1B ((uint32_t)0x00000000U) +#define SDMMC_DATABLOCK_SIZE_2B SDMMC_DCTRL_DBLOCKSIZE_0 +#define SDMMC_DATABLOCK_SIZE_4B SDMMC_DCTRL_DBLOCKSIZE_1 +#define SDMMC_DATABLOCK_SIZE_8B (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_1) +#define SDMMC_DATABLOCK_SIZE_16B SDMMC_DCTRL_DBLOCKSIZE_2 +#define SDMMC_DATABLOCK_SIZE_32B (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_2) +#define SDMMC_DATABLOCK_SIZE_64B (SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_2) +#define SDMMC_DATABLOCK_SIZE_128B (SDMMC_DCTRL_DBLOCKSIZE_0| \ + SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_2) +#define SDMMC_DATABLOCK_SIZE_256B SDMMC_DCTRL_DBLOCKSIZE_3 +#define SDMMC_DATABLOCK_SIZE_512B (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_1024B (SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_2048B (SDMMC_DCTRL_DBLOCKSIZE_0| \ + SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_4096B (SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_8192B (SDMMC_DCTRL_DBLOCKSIZE_0| \ + SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3) +#define SDMMC_DATABLOCK_SIZE_16384B (SDMMC_DCTRL_DBLOCKSIZE_1| \ + SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3) + +#define IS_SDMMC_BLOCK_SIZE(SIZE) (((SIZE) == SDMMC_DATABLOCK_SIZE_1B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_2B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_4B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_8B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_16B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_32B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_64B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_128B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_256B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_512B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_1024B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_2048B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_4096B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_8192B) || \ + ((SIZE) == SDMMC_DATABLOCK_SIZE_16384B)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Transfer_Direction Transfer Direction + * @{ + */ +#define SDMMC_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000U) +#define SDMMC_TRANSFER_DIR_TO_SDMMC SDMMC_DCTRL_DTDIR + +#define IS_SDMMC_TRANSFER_DIR(DIR) (((DIR) == SDMMC_TRANSFER_DIR_TO_CARD) || \ + ((DIR) == SDMMC_TRANSFER_DIR_TO_SDMMC)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Transfer_Type Transfer Type + * @{ + */ +#define SDMMC_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000U) +#define SDMMC_TRANSFER_MODE_STREAM SDMMC_DCTRL_DTMODE_1 + +#define IS_SDMMC_TRANSFER_MODE(MODE) (((MODE) == SDMMC_TRANSFER_MODE_BLOCK) || \ + ((MODE) == SDMMC_TRANSFER_MODE_STREAM)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_DPSM_State DPSM State + * @{ + */ +#define SDMMC_DPSM_DISABLE ((uint32_t)0x00000000U) +#define SDMMC_DPSM_ENABLE SDMMC_DCTRL_DTEN + +#define IS_SDMMC_DPSM(DPSM) (((DPSM) == SDMMC_DPSM_DISABLE) ||\ + ((DPSM) == SDMMC_DPSM_ENABLE)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Read_Wait_Mode Read Wait Mode + * @{ + */ +#define SDMMC_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000U) +#define SDMMC_READ_WAIT_MODE_CLK (SDMMC_DCTRL_RWMOD) + +#define IS_SDMMC_READWAIT_MODE(MODE) (((MODE) == SDMMC_READ_WAIT_MODE_CLK) || \ + ((MODE) == SDMMC_READ_WAIT_MODE_DATA2)) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Interrupt_sources Interrupt Sources + * @{ + */ +#define SDMMC_IT_CCRCFAIL SDMMC_MASK_CCRCFAILIE +#define SDMMC_IT_DCRCFAIL SDMMC_MASK_DCRCFAILIE +#define SDMMC_IT_CTIMEOUT SDMMC_MASK_CTIMEOUTIE +#define SDMMC_IT_DTIMEOUT SDMMC_MASK_DTIMEOUTIE +#define SDMMC_IT_TXUNDERR SDMMC_MASK_TXUNDERRIE +#define SDMMC_IT_RXOVERR SDMMC_MASK_RXOVERRIE +#define SDMMC_IT_CMDREND SDMMC_MASK_CMDRENDIE +#define SDMMC_IT_CMDSENT SDMMC_MASK_CMDSENTIE +#define SDMMC_IT_DATAEND SDMMC_MASK_DATAENDIE +#define SDMMC_IT_DHOLD SDMMC_MASK_DHOLDIE +#define SDMMC_IT_DBCKEND SDMMC_MASK_DBCKENDIE +#define SDMMC_IT_DABORT SDMMC_MASK_DABORTIE +#define SDMMC_IT_TXFIFOHE SDMMC_MASK_TXFIFOHEIE +#define SDMMC_IT_RXFIFOHF SDMMC_MASK_RXFIFOHFIE +#define SDMMC_IT_RXFIFOF SDMMC_MASK_RXFIFOFIE +#define SDMMC_IT_TXFIFOE SDMMC_MASK_TXFIFOEIE +#define SDMMC_IT_BUSYD0END SDMMC_MASK_BUSYD0ENDIE +#define SDMMC_IT_SDIOIT SDMMC_MASK_SDIOITIE +#define SDMMC_IT_ACKFAIL SDMMC_MASK_ACKFAILIE +#define SDMMC_IT_ACKTIMEOUT SDMMC_MASK_ACKTIMEOUTIE +#define SDMMC_IT_VSWEND SDMMC_MASK_VSWENDIE +#define SDMMC_IT_CKSTOP SDMMC_MASK_CKSTOPIE +#define SDMMC_IT_IDMABTC SDMMC_MASK_IDMABTCIE +/** + * @} + */ + +/** @defgroup SDMMC_LL_Flags Flags + * @{ + */ +#define SDMMC_FLAG_CCRCFAIL SDMMC_STA_CCRCFAIL +#define SDMMC_FLAG_DCRCFAIL SDMMC_STA_DCRCFAIL +#define SDMMC_FLAG_CTIMEOUT SDMMC_STA_CTIMEOUT +#define SDMMC_FLAG_DTIMEOUT SDMMC_STA_DTIMEOUT +#define SDMMC_FLAG_TXUNDERR SDMMC_STA_TXUNDERR +#define SDMMC_FLAG_RXOVERR SDMMC_STA_RXOVERR +#define SDMMC_FLAG_CMDREND SDMMC_STA_CMDREND +#define SDMMC_FLAG_CMDSENT SDMMC_STA_CMDSENT +#define SDMMC_FLAG_DATAEND SDMMC_STA_DATAEND +#define SDMMC_FLAG_DHOLD SDMMC_STA_DHOLD +#define SDMMC_FLAG_DBCKEND SDMMC_STA_DBCKEND +#define SDMMC_FLAG_DABORT SDMMC_STA_DABORT +#define SDMMC_FLAG_DPSMACT SDMMC_STA_DPSMACT +#define SDMMC_FLAG_CMDACT SDMMC_STA_CPSMACT +#define SDMMC_FLAG_TXFIFOHE SDMMC_STA_TXFIFOHE +#define SDMMC_FLAG_RXFIFOHF SDMMC_STA_RXFIFOHF +#define SDMMC_FLAG_TXFIFOF SDMMC_STA_TXFIFOF +#define SDMMC_FLAG_RXFIFOF SDMMC_STA_RXFIFOF +#define SDMMC_FLAG_TXFIFOE SDMMC_STA_TXFIFOE +#define SDMMC_FLAG_RXFIFOE SDMMC_STA_RXFIFOE +#define SDMMC_FLAG_BUSYD0 SDMMC_STA_BUSYD0 +#define SDMMC_FLAG_BUSYD0END SDMMC_STA_BUSYD0END +#define SDMMC_FLAG_SDIOIT SDMMC_STA_SDIOIT +#define SDMMC_FLAG_ACKFAIL SDMMC_STA_ACKFAIL +#define SDMMC_FLAG_ACKTIMEOUT SDMMC_STA_ACKTIMEOUT +#define SDMMC_FLAG_VSWEND SDMMC_STA_VSWEND +#define SDMMC_FLAG_CKSTOP SDMMC_STA_CKSTOP +#define SDMMC_FLAG_IDMATE SDMMC_STA_IDMATE +#define SDMMC_FLAG_IDMABTC SDMMC_STA_IDMABTC + +#define SDMMC_STATIC_FLAGS ((uint32_t)(SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_CTIMEOUT |\ + SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_RXOVERR |\ + SDMMC_FLAG_CMDREND | SDMMC_FLAG_CMDSENT | SDMMC_FLAG_DATAEND |\ + SDMMC_FLAG_DHOLD | SDMMC_FLAG_DBCKEND | SDMMC_FLAG_DABORT |\ + SDMMC_FLAG_BUSYD0END | SDMMC_FLAG_SDIOIT | SDMMC_FLAG_ACKFAIL |\ + SDMMC_FLAG_ACKTIMEOUT | SDMMC_FLAG_VSWEND | SDMMC_FLAG_CKSTOP |\ + SDMMC_FLAG_IDMATE | SDMMC_FLAG_IDMABTC)) + +#define SDMMC_STATIC_CMD_FLAGS ((uint32_t)(SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CTIMEOUT | SDMMC_FLAG_CMDREND |\ + SDMMC_FLAG_CMDSENT | SDMMC_FLAG_BUSYD0END)) + +#define SDMMC_STATIC_DATA_FLAGS ((uint32_t)(SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_TXUNDERR |\ + SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DATAEND | SDMMC_FLAG_DHOLD |\ + SDMMC_FLAG_DBCKEND | SDMMC_FLAG_DABORT | SDMMC_FLAG_IDMATE |\ + SDMMC_FLAG_IDMABTC)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros + * @{ + */ + +/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions + * @brief SDMMC_LL registers bit address in the alias region + * @{ + */ +/* ---------------------- SDMMC registers bit mask --------------------------- */ +/* --- CLKCR Register ---*/ +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)(SDMMC_CLKCR_CLKDIV | SDMMC_CLKCR_PWRSAV |\ + SDMMC_CLKCR_WIDBUS |\ + SDMMC_CLKCR_NEGEDGE | SDMMC_CLKCR_HWFC_EN |\ + SDMMC_CLKCR_DDR | SDMMC_CLKCR_BUSSPEED |\ + SDMMC_CLKCR_SELCLKRX)) + +/* --- DCTRL Register ---*/ +/* SDMMC DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)(SDMMC_DCTRL_DTEN | SDMMC_DCTRL_DTDIR |\ + SDMMC_DCTRL_DTMODE | SDMMC_DCTRL_DBLOCKSIZE)) + +/* --- CMD Register ---*/ +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)(SDMMC_CMD_CMDINDEX | SDMMC_CMD_WAITRESP |\ + SDMMC_CMD_WAITINT | SDMMC_CMD_WAITPEND |\ + SDMMC_CMD_CPSMEN | SDMMC_CMD_CMDSUSPEND)) + +/* SDMMC Initialization Frequency (400KHz max) for Peripheral CLK 200MHz*/ +#define SDMMC_INIT_CLK_DIV ((uint8_t)0xFA) + +/* SDMMC Default Speed Frequency (25Mhz max) for Peripheral CLK 200MHz*/ +#define SDMMC_NSPEED_CLK_DIV ((uint8_t)0x4) + +/* SDMMC High Speed Frequency (50Mhz max) for Peripheral CLK 200MHz*/ +#define SDMMC_HSPEED_CLK_DIV ((uint8_t)0x2) +/** + * @} + */ + +/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +/** + * @brief Enable the SDMMC device interrupt. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __SDMMC_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) + +/** + * @brief Disable the SDMMC device interrupt. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __SDMMC_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified SDMMC flag is set or not. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_DPSMACT: Data path state machine active + * @arg SDMMC_FLAG_CPSMACT: Command path state machine active + * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full + * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy) + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval The new state of SDMMC_FLAG (SET or RESET). + */ +#define __SDMMC_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != 0U) + + +/** + * @brief Clears the SDMMC pending flags. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @retval None + */ +#define __SDMMC_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) + +/** + * @brief Checks whether the specified SDMMC interrupt has occurred or not. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval The new state of SDMMC_IT (SET or RESET). + */ +#define __SDMMC_GET_IT(__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Clears the SDMMC's interrupt pending bits. + * @param __INSTANCE__ Pointer to SDMMC register base + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @retval None + */ +#define __SDMMC_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_START_READWAIT_ENABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_RWSTART) + +/** + * @brief Disable Start the SD I/O Read Wait operations. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_START_READWAIT_DISABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_RWSTART) + +/** + * @brief Enable Start the SD I/O Read Wait operation. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_STOP_READWAIT_ENABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_RWSTOP) + +/** + * @brief Disable Stop the SD I/O Read Wait operations. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_STOP_READWAIT_DISABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_RWSTOP) + +/** + * @brief Enable the SD I/O Mode Operation. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_OPERATION_ENABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_SDIOEN) + +/** + * @brief Disable the SD I/O Mode Operation. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_OPERATION_DISABLE(__INSTANCE__) ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_SDIOEN) + +/** + * @brief Enable the SD I/O Suspend command sending. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_SUSPEND_CMD_ENABLE(__INSTANCE__) ((__INSTANCE__)->CMD |= SDMMC_CMD_CMDSUSPEND) + +/** + * @brief Disable the SD I/O Suspend command sending. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_SUSPEND_CMD_DISABLE(__INSTANCE__) ((__INSTANCE__)->CMD &= ~SDMMC_CMD_CMDSUSPEND) + +/** + * @brief Enable the CMDTRANS mode. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_CMDTRANS_ENABLE(__INSTANCE__) ((__INSTANCE__)->CMD |= SDMMC_CMD_CMDTRANS) + +/** + * @brief Disable the CMDTRANS mode. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_CMDTRANS_DISABLE(__INSTANCE__) ((__INSTANCE__)->CMD &= ~SDMMC_CMD_CMDTRANS) + +/** + * @brief Enable the CMDSTOP mode. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_CMDSTOP_ENABLE(__INSTANCE__) ((__INSTANCE__)->CMD |= SDMMC_CMD_CMDSTOP) + +/** + * @brief Disable the CMDSTOP mode. + * @param __INSTANCE__ Pointer to SDMMC register base + * @retval None + */ +#define __SDMMC_CMDSTOP_DISABLE(__INSTANCE__) ((__INSTANCE__)->CMD &= ~SDMMC_CMD_CMDSTOP) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SDMMC_LL_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions **********************************/ +/** @addtogroup HAL_SDMMC_LL_Group1 + * @{ + */ +HAL_StatusTypeDef SDMMC_Init(SDMMC_TypeDef *SDMMCx, SDMMC_InitTypeDef Init); +/** + * @} + */ + +/* I/O operation functions *****************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group2 + * @{ + */ +uint32_t SDMMC_ReadFIFO(SDMMC_TypeDef *SDMMCx); +HAL_StatusTypeDef SDMMC_WriteFIFO(SDMMC_TypeDef *SDMMCx, uint32_t *pWriteData); +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup HAL_SDMMC_LL_Group3 + * @{ + */ +HAL_StatusTypeDef SDMMC_PowerState_ON(SDMMC_TypeDef *SDMMCx); +HAL_StatusTypeDef SDMMC_PowerState_Cycle(SDMMC_TypeDef *SDMMCx); +HAL_StatusTypeDef SDMMC_PowerState_OFF(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetPowerState(SDMMC_TypeDef *SDMMCx); + +/* Command path state machine (CPSM) management functions */ +HAL_StatusTypeDef SDMMC_SendCommand(SDMMC_TypeDef *SDMMCx, SDMMC_CmdInitTypeDef *Command); +uint8_t SDMMC_GetCommandResponse(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetResponse(SDMMC_TypeDef *SDMMCx, uint32_t Response); + +/* Data path state machine (DPSM) management functions */ +HAL_StatusTypeDef SDMMC_ConfigData(SDMMC_TypeDef *SDMMCx, SDMMC_DataInitTypeDef *Data); +uint32_t SDMMC_GetDataCounter(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetFIFOCount(SDMMC_TypeDef *SDMMCx); + +/* SDMMC Cards mode management functions */ +HAL_StatusTypeDef SDMMC_SetSDMMCReadWaitMode(SDMMC_TypeDef *SDMMCx, uint32_t SDMMC_ReadWaitMode); +/** + * @} + */ + +/* SDMMC Commands management functions ******************************************/ +/** @addtogroup HAL_SDMMC_LL_Group4 + * @{ + */ +uint32_t SDMMC_CmdBlockLength(SDMMC_TypeDef *SDMMCx, uint32_t BlockSize); +uint32_t SDMMC_CmdReadSingleBlock(SDMMC_TypeDef *SDMMCx, uint32_t ReadAdd); +uint32_t SDMMC_CmdReadMultiBlock(SDMMC_TypeDef *SDMMCx, uint32_t ReadAdd); +uint32_t SDMMC_CmdWriteSingleBlock(SDMMC_TypeDef *SDMMCx, uint32_t WriteAdd); +uint32_t SDMMC_CmdWriteMultiBlock(SDMMC_TypeDef *SDMMCx, uint32_t WriteAdd); +uint32_t SDMMC_CmdEraseStartAdd(SDMMC_TypeDef *SDMMCx, uint32_t StartAdd); +uint32_t SDMMC_CmdSDEraseStartAdd(SDMMC_TypeDef *SDMMCx, uint32_t StartAdd); +uint32_t SDMMC_CmdEraseEndAdd(SDMMC_TypeDef *SDMMCx, uint32_t EndAdd); +uint32_t SDMMC_CmdSDEraseEndAdd(SDMMC_TypeDef *SDMMCx, uint32_t EndAdd); +uint32_t SDMMC_CmdErase(SDMMC_TypeDef *SDMMCx, uint32_t EraseType); +uint32_t SDMMC_CmdStopTransfer(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdSelDesel(SDMMC_TypeDef *SDMMCx, uint32_t Addr); +uint32_t SDMMC_CmdGoIdleState(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdOperCond(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdAppCommand(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdAppOperCommand(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdBusWidth(SDMMC_TypeDef *SDMMCx, uint32_t BusWidth); +uint32_t SDMMC_CmdSendSCR(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdSendCID(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdSendCSD(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdSetRelAdd(SDMMC_TypeDef *SDMMCx, uint16_t *pRCA); +uint32_t SDMMC_CmdSetRelAddMmc(SDMMC_TypeDef *SDMMCx, uint16_t RCA); +uint32_t SDMMC_CmdSleepMmc(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdSendStatus(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdStatusRegister(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdVoltageSwitch(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_CmdOpCondition(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdSwitch(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +uint32_t SDMMC_CmdSendEXTCSD(SDMMC_TypeDef *SDMMCx, uint32_t Argument); +/** + * @} + */ + +/* SDMMC Responses management functions *****************************************/ +/** @addtogroup HAL_SDMMC_LL_Group5 + * @{ + */ +uint32_t SDMMC_GetCmdResp1(SDMMC_TypeDef *SDMMCx, uint8_t SD_CMD, uint32_t Timeout); +uint32_t SDMMC_GetCmdResp2(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetCmdResp3(SDMMC_TypeDef *SDMMCx); +uint32_t SDMMC_GetCmdResp6(SDMMC_TypeDef *SDMMCx, uint8_t SD_CMD, uint16_t *pRCA); +uint32_t SDMMC_GetCmdResp7(SDMMC_TypeDef *SDMMCx); +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_SDMMC_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h new file mode 100644 index 0000000..aa5149a --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h @@ -0,0 +1,2442 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SYSCFG registers + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_LL_SYSTEM_H +#define __STM32H7xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ +/** @defgroup SYSTEM_LL_EC_FLASH_BANK1_SECTORS SYSCFG Flash Bank1 sectors bits status + * @{ + */ +#define LL_SYSCFG_FLASH_B1_SECTOR0_STATUS_BIT 0x10000U +#define LL_SYSCFG_FLASH_B1_SECTOR1_STATUS_BIT 0x20000U +#define LL_SYSCFG_FLASH_B1_SECTOR2_STATUS_BIT 0x40000U +#define LL_SYSCFG_FLASH_B1_SECTOR3_STATUS_BIT 0x80000U +#define LL_SYSCFG_FLASH_B1_SECTOR4_STATUS_BIT 0x100000U +#define LL_SYSCFG_FLASH_B1_SECTOR5_STATUS_BIT 0x200000U +#define LL_SYSCFG_FLASH_B1_SECTOR6_STATUS_BIT 0x400000U +#define LL_SYSCFG_FLASH_B1_SECTOR7_STATUS_BIT 0x800000U +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_FLASH_BANK2_SECTORS SYSCFG Flash Bank2 sectors bits status + * @{ + */ +#define LL_SYSCFG_FLASH_B2_SECTOR0_STATUS_BIT 0x10000U +#define LL_SYSCFG_FLASH_B2_SECTOR1_STATUS_BIT 0x20000U +#define LL_SYSCFG_FLASH_B2_SECTOR2_STATUS_BIT 0x40000U +#define LL_SYSCFG_FLASH_B2_SECTOR3_STATUS_BIT 0x80000U +#define LL_SYSCFG_FLASH_B2_SECTOR4_STATUS_BIT 0x100000U +#define LL_SYSCFG_FLASH_B2_SECTOR5_STATUS_BIT 0x200000U +#define LL_SYSCFG_FLASH_B2_SECTOR6_STATUS_BIT 0x400000U +#define LL_SYSCFG_FLASH_B2_SECTOR7_STATUS_BIT 0x800000U +/** + * @} + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_PMCR_I2C1_FMP /*!< Enable Fast Mode Plus for I2C1 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_PMCR_I2C2_FMP /*!< Enable Fast Mode Plus for I2C2 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_PMCR_I2C3_FMP /*!< Enable Fast Mode Plus for I2C3 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 SYSCFG_PMCR_I2C4_FMP /*!< Enable Fast Mode Plus for I2C4 */ +#if defined(I2C5) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C5 SYSCFG_PMCR_I2C5_FMP /*!< Enable Fast Mode Plus for I2C5 */ +#endif /*I2C5*/ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_PMCR_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_PMCR_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_PMCR_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_PMCR_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_ANALOG_SWITCH Analog Switch control +* @{ +*/ +#if defined(SYSCFG_PMCR_BOOSTEN) +#define LL_SYSCFG_ANALOG_SWITCH_BOOSTEN SYSCFG_PMCR_BOOSTEN /*!< I/O analog switch voltage booster enable */ +#endif /*SYSCFG_PMCR_BOOSTEN*/ +#define LL_SYSCFG_ANALOG_SWITCH_PA0 SYSCFG_PMCR_PA0SO /*!< PA0 Switch Open */ +#define LL_SYSCFG_ANALOG_SWITCH_PA1 SYSCFG_PMCR_PA1SO /*!< PA1 Switch Open */ +#define LL_SYSCFG_ANALOG_SWITCH_PC2 SYSCFG_PMCR_PC2SO /*!< PC2 Switch Open */ +#define LL_SYSCFG_ANALOG_SWITCH_PC3 SYSCFG_PMCR_PC3SO /*!< PC3 Switch Open */ +/** + * @} + */ + +#if defined(SYSCFG_PMCR_EPIS_SEL) +/** @defgroup SYSTEM_LL_EC_EPIS Ethernet PHY Interface Selection +* @{ +*/ +#define LL_SYSCFG_ETH_MII 0x00000000U /*!< ETH Media MII interface */ +#define LL_SYSCFG_ETH_RMII SYSCFG_PMCR_EPIS_SEL_2 /*!< ETH Media RMII interface */ +/** + * @} + */ +#endif /* SYSCFG_PMCR_EPIS_SEL */ + +/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT + * @{ + */ +#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */ +#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */ +#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */ +#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */ +#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */ +#define LL_SYSCFG_EXTI_PORTF 5U /*!< EXTI PORT F */ +#define LL_SYSCFG_EXTI_PORTG 6U /*!< EXTI PORT G */ +#define LL_SYSCFG_EXTI_PORTH 7U /*!< EXTI PORT H */ +#if defined(GPIOI) +#define LL_SYSCFG_EXTI_PORTI 8U /*!< EXTI PORT I */ +#endif /*GPIOI*/ +#define LL_SYSCFG_EXTI_PORTJ 9U /*!< EXTI PORT J */ +#define LL_SYSCFG_EXTI_PORTK 10U /*!< EXTI PORT k */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE + * @{ + */ +#define LL_SYSCFG_EXTI_LINE0 ((0x000FUL << 16U) | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE1 ((0x00F0UL << 16U) | 0U) /*!< EXTI_POSITION_4 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE2 ((0x0F00UL << 16U) | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE3 ((0xF000UL << 16U) | 0U) /*!< EXTI_POSITION_12 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE4 ((0x000FUL << 16U) | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE5 ((0x00F0UL << 16U) | 1U) /*!< EXTI_POSITION_4 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE6 ((0x0F00UL << 16U) | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE7 ((0xF000UL << 16U) | 1U) /*!< EXTI_POSITION_12 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE8 ((0x000FUL << 16U) | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE9 ((0x00F0UL << 16U) | 2U) /*!< EXTI_POSITION_4 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE10 ((0x0F00UL << 16U) | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE11 ((0xF000UL << 16U) | 2U) /*!< EXTI_POSITION_12 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE12 ((0x000FUL << 16U) | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE13 ((0x00F0UL << 16U) | 3U) /*!< EXTI_POSITION_4 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE14 ((0x0F00UL << 16U) | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE15 ((0xF000UL << 16U) | 3U) /*!< EXTI_POSITION_12 | EXTICR[3] */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK + * @{ + */ +#define LL_SYSCFG_TIMBREAK_AXISRAM_DBL_ECC SYSCFG_CFGR_AXISRAML /*!< Enables and locks the AXIRAM double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_ITCM_DBL_ECC SYSCFG_CFGR_ITCML /*!< Enables and locks the ITCM double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_DTCM_DBL_ECC SYSCFG_CFGR_DTCML /*!< Enables and locks the DTCM double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_SRAM1_DBL_ECC SYSCFG_CFGR_SRAM1L /*!< Enables and locks the SRAM1 double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_SRAM2_DBL_ECC SYSCFG_CFGR_SRAM2L /*!< Enables and locks the SRAM2 double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#if defined(SYSCFG_CFGR_SRAM3L) +#define LL_SYSCFG_TIMBREAK_SRAM3_DBL_ECC SYSCFG_CFGR_SRAM3L /*!< Enables and locks the SRAM3 double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ +#endif /*SYSCFG_CFGR_SRAM3L*/ + +#define LL_SYSCFG_TIMBREAK_SRAM4_DBL_ECC SYSCFG_CFGR_SRAM4L /*!< Enables and locks the SRAM4 double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_BKRAM_DBL_ECC SYSCFG_CFGR_BKRAML /*!< Enables and locks the BKRAM double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_CM7_LOCKUP SYSCFG_CFGR_CM7L /*!< Enables and locks the Cortex-M7 LOCKUP signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_FLASH_DBL_ECC SYSCFG_CFGR_FLASHL /*!< Enables and locks the FLASH double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR_PVDL /*!< Enables and locks the PVD connection + with TIM1/8/15/16/17 and HRTIM Break Input + and also the PVDE and PLS bits of the Power Control Interface */ +#if defined(DUAL_CORE) +#define LL_SYSCFG_TIMBREAK_CM4_LOCKUP SYSCFG_CFGR_CM4L /*!< Enables and locks the Cortex-M4 LOCKUP signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_CS SYSCFG I/O compensation cell Code selection + * @{ + */ +#define LL_SYSCFG_CELL_CODE 0U +#define LL_SYSCFG_REGISTER_CODE SYSCFG_CCCSR_CS +/** + * @} + */ + +/** @defgroup SYSTEM_LL_IWDG1_CONTROL_MODES SYSCFG IWDG1 control modes + * @{ + */ +#define LL_SYSCFG_IWDG1_SW_CONTROL_MODE 0U +#define LL_SYSCFG_IWDG1_HW_CONTROL_MODE SYSCFG_UR11_IWDG1M +/** + * @} + */ + +#if defined (DUAL_CORE) +/** @defgroup SYSTEM_LL_IWDG2_CONTROL_MODES SYSCFG IWDG2 control modes + * @{ + */ +#define LL_SYSCFG_IWDG2_SW_CONTROL_MODE 0U +#define LL_SYSCFG_IWDG2_HW_CONTROL_MODE SYSCFG_UR12_IWDG2M +/** + * @} + */ +#endif /* DUAL_CORE */ + +/** @defgroup SYSTEM_LL_DTCM_RAM_SIZE SYSCFG DTCM RAM size configuration + * @{ + */ +#define LL_SYSCFG_DTCM_RAM_SIZE_2KB 0U +#define LL_SYSCFG_DTCM_RAM_SIZE_4KB 1U +#define LL_SYSCFG_DTCM_RAM_SIZE_8KB 2U +#define LL_SYSCFG_DTCM_RAM_SIZE_16KB 3U +/** + * @} + */ +#ifdef SYSCFG_UR17_TCM_AXI_CFG +/** @defgroup SYSTEM_LL_PACKAGE SYSCFG device package + * @{ + */ +#define LL_SYSCFG_ITCM_AXI_64KB_320KB 0U +#define LL_SYSCFG_ITCM_AXI_128KB_256KB 1U +#define LL_SYSCFG_ITCM_AXI_192KB_192KB 2U +#define LL_SYSCFG_ITCM_AXI_256KB_128KB 3U +/** + * @} + */ +#endif /* #ifdef SYSCFG_UR17_TCM_AXI_CFG */ +#if defined(SYSCFG_PKGR_PKG) +/** @defgroup SYSTEM_LL_PACKAGE SYSCFG device package + * @{ + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define LL_SYSCFG_LQFP100_PACKAGE 0U +#define LL_SYSCFG_TQFP144_PACKAGE 2U +#define LL_SYSCFG_TQFP176_UFBGA176_PACKAGE 5U +#define LL_SYSCFG_LQFP208_TFBGA240_PACKAGE 8U +#elif (STM32H7_DEV_ID == 0x483UL) +#define LL_SYSCFG_VFQFPN68_INDUS_PACKAGE 0U +#define LL_SYSCFG_TFBGA100_LQFP100_PACKAGE 1U +#define LL_SYSCFG_LQFP100_INDUS_PACKAGE 2U +#define LL_SYSCFG_TFBGA100_INDUS_PACKAGE 3U +#define LL_SYSCFG_WLCSP115_INDUS_PACKAGE 4U +#define LL_SYSCFG_LQFP144_PACKAGE 5U +#define LL_SYSCFG_UFBGA144_PACKAGE 6U +#define LL_SYSCFG_LQFP144_INDUS_PACKAGE 7U +#define LL_SYSCFG_UFBGA169_INDUS_PACKAGE 8U +#define LL_SYSCFG_UFBGA176PLUS25_INDUS_PACKAGE 9U +#define LL_SYSCFG_LQFP176_INDUS_PACKAGE 10U +#endif /* STM32H7_DEV_ID == 0x450UL */ +/** + * @} + */ +#endif /* SYSCFG_PKGR_PKG */ + +/** @defgroup SYSTEM_LL_SYSCFG_BOR SYSCFG Brownout Reset Threshold Level + * @{ + */ +#define LL_SYSCFG_BOR_OFF_RESET_LEVEL 0x00000000U +#define LL_SYSCFG_BOR_LOW_RESET_LEVEL SYSCFG_UR2_BORH_0 +#define LL_SYSCFG_BOR_MEDIUM_RESET_LEVEL SYSCFG_UR2_BORH_1 +#define LL_SYSCFG_BOR_HIGH_RESET_LEVEL SYSCFG_UR2_BORH + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment + * @{ + */ +#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ +#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1LFZ1_DBG_TIM2 /*!< TIM2 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1LFZ1_DBG_TIM3 /*!< TIM3 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1LFZ1_DBG_TIM4 /*!< TIM4 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1LFZ1_DBG_TIM5 /*!< TIM5 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1LFZ1_DBG_TIM6 /*!< TIM6 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1LFZ1_DBG_TIM7 /*!< TIM7 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1LFZ1_DBG_TIM12 /*!< TIM12 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1LFZ1_DBG_TIM13 /*!< TIM13 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1LFZ1_DBG_TIM14 /*!< TIM14 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1LFZ1_DBG_LPTIM1 /*!< LPTIM1 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1LFZ1_DBG_I2C1 /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1LFZ1_DBG_I2C2 /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1LFZ1_DBG_I2C3 /*!< I2C3 SMBUS timeout mode stopped when Core is halted */ +#if defined(I2C5) +#define LL_DBGMCU_APB1_GRP1_I2C5_STOP DBGMCU_APB1LFZ1_DBG_I2C5 /*!< I2C5 SMBUS timeout mode stopped when Core is halted */ +#endif /*I2C5*/ +/** + * @} + */ + + +/** @defgroup SYSTEM_LL_EC_APB1_GRP2_STOP_IP DBGMCU APB1 GRP2 STOP IP + * @{ + */ +#if defined(DBGMCU_APB1HFZ1_DBG_FDCAN) +#define LL_DBGMCU_APB1_GRP2_FDCAN_STOP DBGMCU_APB1HFZ1_DBG_FDCAN /*!< FDCAN is frozen while the core is in debug mode */ +#endif /*DBGMCU_APB1HFZ1_DBG_FDCAN*/ +#if defined(TIM23) +#define LL_DBGMCU_APB1_GRP2_TIM23_STOP DBGMCU_APB1HFZ1_DBG_TIM23 /*!< TIM23 is frozen while the core is in debug mode */ +#endif /*TIM23*/ +#if defined(TIM24) +#define LL_DBGMCU_APB1_GRP2_TIM24_STOP DBGMCU_APB1HFZ1_DBG_TIM24 /*!< TIM24 is frozen while the core is in debug mode */ +#endif /*TIM24*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2FZ1_DBG_TIM1 /*!< TIM1 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2FZ1_DBG_TIM8 /*!< TIM8 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_APB2FZ1_DBG_TIM15 /*!< TIM15 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_APB2FZ1_DBG_TIM16 /*!< TIM16 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_APB2FZ1_DBG_TIM17 /*!< TIM17 counter stopped when core is halted */ +#if defined(HRTIM1) +#define LL_DBGMCU_APB2_GRP1_HRTIM_STOP DBGMCU_APB2FZ1_DBG_HRTIM /*!< HRTIM counter stopped when core is halted */ +#endif /*HRTIM1*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB3_GRP1_STOP_IP DBGMCU APB3 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB3_GRP1_WWDG1_STOP DBGMCU_APB3FZ1_DBG_WWDG1 /*!< WWDG1 is frozen while the core is in debug mode */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB4_GRP1_STOP_IP DBGMCU APB4 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB4_GRP1_I2C4_STOP DBGMCU_APB4FZ1_DBG_I2C4 /*!< I2C4 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_LPTIM2_STOP DBGMCU_APB4FZ1_DBG_LPTIM2 /*!< LPTIM2 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_LPTIM3_STOP DBGMCU_APB4FZ1_DBG_LPTIM3 /*!< LPTIM3 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_LPTIM4_STOP DBGMCU_APB4FZ1_DBG_LPTIM4 /*!< LPTIM4 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_LPTIM5_STOP DBGMCU_APB4FZ1_DBG_LPTIM5 /*!< LPTIM5 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_RTC_STOP DBGMCU_APB4FZ1_DBG_RTC /*!< RTC is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_IWDG1_STOP DBGMCU_APB4FZ1_DBG_IWDG1 /*!< IWDG1 is frozen while the core is in debug mode */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */ +#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */ +#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */ +#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */ +#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */ +#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */ +#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG + * @{ + */ + +#if defined(SYSCFG_PMCR_EPIS_SEL) +/** + * @brief Select Ethernet PHY interface + * @rmtoll PMCR EPIS_SEL LL_SYSCFG_SetPHYInterface + * @param Interface This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_ETH_MII + * @arg @ref LL_SYSCFG_ETH_RMII + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface) +{ + MODIFY_REG(SYSCFG->PMCR, SYSCFG_PMCR_EPIS_SEL, Interface); +} + +/** + * @brief Get Ethernet PHY interface + * @rmtoll PMCR EPIS_SEL LL_SYSCFG_GetPHYInterface + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_ETH_MII + * @arg @ref LL_SYSCFG_ETH_RMII + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->PMCR, SYSCFG_PMCR_EPIS_SEL)); +} + +#endif /* SYSCFG_PMCR_EPIS_SEL */ +/** + * @brief Open an Analog Switch + * @rmtoll PMCR PA0SO LL_SYSCFG_OpenAnalogSwitch + * @rmtoll PMCR PA1SO LL_SYSCFG_OpenAnalogSwitch + * @rmtoll PMCR PC2SO LL_SYSCFG_OpenAnalogSwitch + * @rmtoll PMCR PC3SO LL_SYSCFG_OpenAnalogSwitch + * @param AnalogSwitch This parameter can be one of the following values: + * @arg LL_SYSCFG_ANALOG_SWITCH_PA0 : PA0 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PA1: PA1 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PC2 : PC2 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PC3: PC3 analog switch + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_OpenAnalogSwitch(uint32_t AnalogSwitch) +{ + SET_BIT(SYSCFG->PMCR, AnalogSwitch); +} + +/** + * @brief Close an Analog Switch + * @rmtoll PMCR PA0SO LL_SYSCFG_CloseAnalogSwitch + * @rmtoll PMCR PA1SO LL_SYSCFG_CloseAnalogSwitch + * @rmtoll PMCR PC2SO LL_SYSCFG_CloseAnalogSwitch + * @rmtoll PMCR PC3SO LL_SYSCFG_CloseAnalogSwitch + * @param AnalogSwitch This parameter can be one of the following values: + * @arg LL_SYSCFG_ANALOG_SWITCH_PA0 : PA0 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PA1: PA1 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PC2 : PC2 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PC3: PC3 analog switch + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_CloseAnalogSwitch(uint32_t AnalogSwitch) +{ + CLEAR_BIT(SYSCFG->PMCR, AnalogSwitch); +} +#ifdef SYSCFG_PMCR_BOOSTEN +/** + * @brief Enable the Analog booster to reduce the total harmonic distortion + * of the analog switch when the supply voltage is lower than 2.7 V + * @rmtoll PMCR BOOSTEN LL_SYSCFG_EnableAnalogBooster + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableAnalogBooster(void) +{ + SET_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} + +/** + * @brief Disable the Analog booster + * @rmtoll PMCR BOOSTEN LL_SYSCFG_DisableAnalogBooster + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableAnalogBooster(void) +{ + CLEAR_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} +#endif /*SYSCFG_PMCR_BOOSTEN*/ +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_PMCR I2C_PBx_FMP LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_PMCR I2Cx_FMP LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C5 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->PMCR, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_PMCR I2C_PBx_FMP LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_PMCR I2Cx_FMP LL_SYSCFG_DisableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C5 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->PMCR, ConfigFastModePlus); +} + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE + * @arg @ref LL_SYSCFG_EXTI_PORTF + * @arg @ref LL_SYSCFG_EXTI_PORTG + * @arg @ref LL_SYSCFG_EXTI_PORTH + * @arg @ref LL_SYSCFG_EXTI_PORTI (*) + * @arg @ref LL_SYSCFG_EXTI_PORTJ + * @arg @ref LL_SYSCFG_EXTI_PORTK + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(SYSCFG->EXTICR[Line & 0x3U], (Line >> 16U), Port << ((POSITION_VAL(Line >> 16U)) & 31U)); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE + * @arg @ref LL_SYSCFG_EXTI_PORTF + * @arg @ref LL_SYSCFG_EXTI_PORTG + * @arg @ref LL_SYSCFG_EXTI_PORTH + * @arg @ref LL_SYSCFG_EXTI_PORTI (*) + * @arg @ref LL_SYSCFG_EXTI_PORTJ + * @arg @ref LL_SYSCFG_EXTI_PORTK + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) +{ + return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0x3U], (Line >> 16U)) >> (POSITION_VAL(Line >> 16U) & 31U)); +} + +/** + * @brief Set connections to TIM1/8/15/16/17 and HRTIM Break inputs + * @note this feature is available on STM32H7 rev.B and above + * @rmtoll SYSCFG_CFGR AXISRAML LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR ITCML LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR DTCML LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR SRAM1L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR SRAM2L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR SRAM3L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR SRAM4L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR BKRAML LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR CM7L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR FLASHL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR PVDL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR_CM4L LL_SYSCFG_SetTIMBreakInputs + * @param Break This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_AXISRAM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_ITCM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_DTCM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM1_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM2_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM3_DBL_ECC (*) + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM4_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_BKRAM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_CM7_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_FLASH_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_PVD + * @arg @ref LL_SYSCFG_TIMBREAK_CM4_LOCKUP (available for dual core lines only) + * @retval None + * (*) value not defined in all devices + */ +__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) +{ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | \ + SYSCFG_CFGR_SRAM3L | SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | SYSCFG_CFGR_FLASHL | \ + SYSCFG_CFGR_PVDL | SYSCFG_CFGR_CM4L, Break); +#elif defined(SYSCFG_CFGR_AXISRAML) && defined(SYSCFG_CFGR_SRAM3L) + MODIFY_REG(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | \ + SYSCFG_CFGR_SRAM3L | SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | SYSCFG_CFGR_FLASHL | \ + SYSCFG_CFGR_PVDL, Break); +#elif defined(SYSCFG_CFGR_AXISRAML) + MODIFY_REG(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | \ + SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL,\ + Break); +#else + MODIFY_REG(SYSCFG->CFGR, SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML |\ + SYSCFG_CFGR_CM7L | SYSCFG_CFGR_FLASHL | \ + SYSCFG_CFGR_PVDL, Break); +#endif /* DUAL_CORE */ +} + +/** + * @brief Get connections to TIM1/8/15/16/17 and HRTIM Break inputs + * @note this feature is available on STM32H7 rev.B and above + * @rmtoll SYSCFG_CFGR AXISRAML LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR ITCML LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR DTCML LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR SRAM1L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR SRAM2L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR SRAM3L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR SRAM4L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR BKRAML LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR CM7L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR FLASHL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR PVDL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR_CM4L LL_SYSCFG_GetTIMBreakInputs + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_AXISRAM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_ITCM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_DTCM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM1_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM2_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM3_DBL_ECC (*) + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM4_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_BKRAM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_CM7_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_FLASH_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_PVD + * @arg @ref LL_SYSCFG_TIMBREAK_CM4_LOCKUP (available for dual core lines only) + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) +{ +#if defined(DUAL_CORE) + return (uint32_t)(READ_BIT(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | \ + SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | SYSCFG_CFGR_SRAM3L | \ + SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | \ + SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL | SYSCFG_CFGR_CM4L)); +#elif defined (SYSCFG_CFGR_AXISRAML) && defined(SYSCFG_CFGR_SRAM3L) + return (uint32_t)(READ_BIT(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | \ + SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | SYSCFG_CFGR_SRAM3L | \ + SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | \ + SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL )); +#elif defined (SYSCFG_CFGR_AXISRAML) + return (uint32_t)(READ_BIT(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | \ + SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | \ + SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | \ + SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL )); +#else + return (uint32_t)(READ_BIT(SYSCFG->CFGR, SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | SYSCFG_CFGR_CM7L | \ + SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL )); +#endif /* DUAL_CORE */ +} + +/** + * @brief Enable the Compensation Cell + * @rmtoll CCCSR EN LL_SYSCFG_EnableCompensationCell + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN); +} + +/** + * @brief Disable the Compensation Cell + * @rmtoll CCCSR EN LL_SYSCFG_DisableCompensationCell + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN); +} + +/** + * @brief Check if the Compensation Cell is enabled + * @rmtoll CCCSR EN LL_SYSCFG_IsEnabledCompensationCell + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledCompensationCell(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN) == SYSCFG_CCCSR_EN) ? 1UL : 0UL); +} + +/** + * @brief Get Compensation Cell ready Flag + * @rmtoll CCCSR READY LL_SYSCFG_IsActiveFlag_CMPCR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_READY) == (SYSCFG_CCCSR_READY)) ? 1UL : 0UL); +} + +/** + * @brief Enable the I/O speed optimization when the product voltage is low. + * @rmtoll CCCSR HSLV LL_SYSCFG_EnableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIOSpeedOptimization(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV0); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +#if defined(SYSCFG_CCCSR_HSLV1) +/** + * @brief Enable the I/O speed optimization when the product voltage is low. + * @rmtoll CCCSR HSLV1 LL_SYSCFG_EnableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIOSpeedOptimization1(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV1); +} + +/** + * @brief Enable the I/O speed optimization when the product voltage is low. + * @rmtoll CCCSR HSLV2 LL_SYSCFG_EnableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIOSpeedOptimization2(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV2); +} + +/** + * @brief Enable the I/O speed optimization when the product voltage is low. + * @rmtoll CCCSR HSLV3 LL_SYSCFG_EnableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIOSpeedOptimization3(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV3); +} +#endif /*SYSCFG_CCCSR_HSLV1*/ + + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @rmtoll CCCSR HSLV LL_SYSCFG_DisableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIOSpeedOptimization(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV0); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +#if defined(SYSCFG_CCCSR_HSLV1) +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @rmtoll CCCSR HSLV1 LL_SYSCFG_DisableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIOSpeedOptimization1(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV1); +} + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @rmtoll CCCSR HSLV2 LL_SYSCFG_DisableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIOSpeedOptimization2(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV2); +} + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @rmtoll CCCSR HSLV3 LL_SYSCFG_DisableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIOSpeedOptimization3(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV3); +} +#endif /*SYSCFG_CCCSR_HSLV1*/ + +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll CCCSR HSLV LL_SYSCFG_IsEnabledIOSpeedOptimization + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIOSpeedOptimization(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV) == SYSCFG_CCCSR_HSLV) ? 1UL : 0UL); +#else + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV0) == SYSCFG_CCCSR_HSLV0) ? 1UL : 0UL); +#endif /*SYSCFG_CCCSR_HSLV*/ +} + +#if defined(SYSCFG_CCCSR_HSLV1) +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll CCCSR HSLV1 LL_SYSCFG_IsEnabledIOSpeedOptimization + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIOSpeedOptimization1(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV1) == SYSCFG_CCCSR_HSLV1) ? 1UL : 0UL); +} + +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll CCCSR HSLV2 LL_SYSCFG_IsEnabledIOSpeedOptimization + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIOSpeedOptimization2(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV2) == SYSCFG_CCCSR_HSLV2) ? 1UL : 0UL); +} + +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll CCCSR HSLV3 LL_SYSCFG_IsEnabledIOSpeedOptimization + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIOSpeedOptimization3(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV3) == SYSCFG_CCCSR_HSLV3) ? 1UL : 0UL); +} +#endif /*SYSCFG_CCCSR_HSLV1*/ + +/** + * @brief Set the code selection for the I/O Compensation cell + * @rmtoll CCCSR CS LL_SYSCFG_SetCellCompensationCode + * @param CompCode: Selects the code to be applied for the I/O compensation cell + * This parameter can be one of the following values: + * @arg LL_SYSCFG_CELL_CODE : Select Code from the cell (available in the SYSCFG_CCVR) + * @arg LL_SYSCFG_REGISTER_CODE: Select Code from the SYSCFG compensation cell code register (SYSCFG_CCCR) + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCellCompensationCode(uint32_t CompCode) +{ + SET_BIT(SYSCFG->CCCSR, CompCode); +} + +/** + * @brief Get the code selected for the I/O Compensation cell + * @rmtoll CCCSR CS LL_SYSCFG_GetCellCompensationCode + * @retval Returned value can be one of the following values: + * @arg LL_SYSCFG_CELL_CODE : Selected Code is from the cell (available in the SYSCFG_CCVR) + * @arg LL_SYSCFG_REGISTER_CODE: Selected Code is from the SYSCFG compensation cell code register (SYSCFG_CCCR) + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetCellCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_CS)); +} + +#ifdef SYSCFG_CCCSR_CS_MMC + +/** + * @brief Get the code selected for the I/O Compensation cell on the VDDMMC power rail + * @rmtoll CCCSR CS LL_SYSCFG_GetCellCompensationCode + * @retval Returned value can be one of the following values: + * @arg LL_SYSCFG_CELL_CODE : Selected Code is from the cell (available in the SYSCFG_CCVR) + * @arg LL_SYSCFG_REGISTER_CODE: Selected Code is from the SYSCFG compensation cell code register (SYSCFG_CCCR) + */ +__STATIC_INLINE uint32_t LL_SYSCFG_MMCGetCellCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_CS_MMC)); +} +#endif /*SYSCFG_CCCSR_CS_MMC*/ + +/** + * @brief Get I/O compensation cell value for PMOS transistors + * @rmtoll CCVR PCV LL_SYSCFG_GetPMOSCompensationValue + * @retval Returned value is the I/O compensation cell value for PMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPMOSCompensationValue(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCVR, SYSCFG_CCVR_PCV)); +} + +/** + * @brief Get I/O compensation cell value for NMOS transistors + * @rmtoll CCVR NCV LL_SYSCFG_GetNMOSCompensationValue + * @retval Returned value is the I/O compensation cell value for NMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetNMOSCompensationValue(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCVR, SYSCFG_CCVR_NCV)); +} + +/** + * @brief Set I/O compensation cell code for PMOS transistors + * @rmtoll CCCR PCC LL_SYSCFG_SetPMOSCompensationCode + * @param PMOSCode PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetPMOSCompensationCode(uint32_t PMOSCode) +{ + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_PCC, PMOSCode); +} + +/** + * @brief Get I/O compensation cell code for PMOS transistors + * @rmtoll CCCR PCC LL_SYSCFG_GetPMOSCompensationCode + * @retval Returned value is the I/O compensation cell code for PMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPMOSCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCR, SYSCFG_CCCR_PCC)); +} + +#ifdef SYSCFG_CCCR_PCC_MMC + +/** + * @brief Set I/O compensation cell code for PMOS transistors corresponding to the VDDMMC power rail + * @rmtoll CCCR PCC LL_SYSCFG_SetPMOSCompensationCode + * @param PMOSCode PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_MMCSetPMOSCompensationCode(uint32_t PMOSCode) +{ + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_PCC_MMC, PMOSCode); +} + +/** + * @brief Get I/O compensation cell code for PMOS transistors corresponding to the VDDMMC power rail + * @rmtoll CCCR PCC LL_SYSCFG_GetPMOSCompensationCode + * @retval Returned value is the I/O compensation cell code for PMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_MMCGetPMOSCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCR, SYSCFG_CCCR_PCC_MMC)); +} +#endif /* SYSCFG_CCCR_PCC_MMC */ + +/** + * @brief Set I/O compensation cell code for NMOS transistors + * @rmtoll CCCR NCC LL_SYSCFG_SetNMOSCompensationCode + * @param NMOSCode NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetNMOSCompensationCode(uint32_t NMOSCode) +{ + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_NCC, NMOSCode); +} + +/** + * @brief Get I/O compensation cell code for NMOS transistors + * @rmtoll CCCR NCC LL_SYSCFG_GetNMOSCompensationCode + * @retval Returned value is the I/O compensation cell code for NMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetNMOSCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCR, SYSCFG_CCCR_NCC)); +} + +#ifdef SYSCFG_CCCR_NCC_MMC + +/** + * @brief Set I/O compensation cell code for NMOS transistors on the VDDMMC power rail. + * @rmtoll CCCR NCC LL_SYSCFG_SetNMOSCompensationCode + * @param NMOSCode: NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_VDMMCSetNMOSCompensationCode(uint32_t NMOSCode) +{ + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_NCC_MMC, NMOSCode); +} + +/** + * @brief Get I/O compensation cell code for NMOS transistors on the VDDMMC power rail. + * @rmtoll CCCR NCC LL_SYSCFG_GetNMOSCompensationCode + * @retval Returned value is the I/O compensation cell code for NMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_VDMMCGetNMOSCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCR, SYSCFG_CCCR_NCC_MMC)); +} +#endif /*SYSCFG_CCCR_NCC_MMC*/ + +#ifdef SYSCFG_PKGR_PKG +/** + * @brief Get the device package + * @rmtoll PKGR PKG LL_SYSCFG_GetPackage + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_LQFP100_PACKAGE (*) + * @arg @ref LL_SYSCFG_TQFP144_PACKAGE (*) + * @arg @ref LL_SYSCFG_TQFP176_UFBGA176_PACKAGE (*) + * @arg @ref LL_SYSCFG_LQFP208_TFBGA240_PACKAGE (*) + * @arg @ref LL_SYSCFG_VFQFPN68_INDUS_PACKAGE (*) + * @arg @ref LL_SYSCFG_TFBGA100_LQFP100_PACKAGE (*) + * @arg @ref LL_SYSCFG_LQFP100_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_TFBGA100_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_WLCSP115_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_LQFP144_PACKAGE (**) + * @arg @ref LL_SYSCFG_UFBGA144_PACKAGE (**) + * @arg @ref LL_SYSCFG_LQFP144_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_UFBGA169_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_UFBGA176PLUS25_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_LQFP176_INDUS_PACKAGE (**) + * + * (*) : For stm32h74xxx and stm32h75xxx family lines. + * (**): For stm32h72xxx and stm32h73xxx family lines. + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPackage(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->PKGR, SYSCFG_PKGR_PKG)); +} +#endif /*SYSCFG_PKGR_PKG*/ + +#ifdef SYSCFG_UR0_RDP +/** + * @brief Get the Flash memory protection level + * @rmtoll UR0 RDP LL_SYSCFG_GetFLashProtectionLevel + * @retval Returned value can be one of the following values: + * 0xAA : RDP level 0 + * 0xCC : RDP level 2 + * Any other value : RDP level 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFLashProtectionLevel(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR0, SYSCFG_UR0_RDP)); +} +#ifdef SYSCFG_UR0_BKS +/** + * @brief Indicate if the Flash memory bank addresses are inverted or not + * @rmtoll UR0 BKS LL_SYSCFG_IsFLashBankAddressesSwaped + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFLashBankAddressesSwaped(void) +{ + return ((READ_BIT(SYSCFG->UR0, SYSCFG_UR0_BKS) == 0U) ? 1UL : 0UL); +} +#endif /*SYSCFG_UR0_BKS*/ + +/** + * @brief Get the BOR Threshold Reset Level + * @rmtoll UR2 BORH LL_SYSCFG_GetBrownoutResetLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_BOR_HIGH_RESET_LEVEL + * @arg @ref LL_SYSCFG_BOR_MEDIUM_RESET_LEVEL + * @arg @ref LL_SYSCFG_BOR_LOW_RESET_LEVEL + * @arg @ref LL_SYSCFG_BOR_OFF_RESET_LEVEL + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetBrownoutResetLevel(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR2, SYSCFG_UR2_BORH)); +} +/** + * @brief BootCM7 address 0 configuration + * @rmtoll UR2 BOOT_ADD0 LL_SYSCFG_SetCM7BootAddress0 + * @param BootAddress :Specifies the CM7 Boot Address to be loaded in Address0 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCM7BootAddress0(uint16_t BootAddress) +{ + /* Configure CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BCM7_ADD0, ((uint32_t)BootAddress << SYSCFG_UR2_BCM7_ADD0_Pos)); +#else + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BOOT_ADD0, ((uint32_t)BootAddress << SYSCFG_UR2_BOOT_ADD0_Pos)); +#endif /*DUAL_CORE*/ + +} + +/** + * @brief Get BootCM7 address 0 + * @rmtoll UR2 BOOT_ADD0 LL_SYSCFG_GetCM7BootAddress0 + * @retval Returned the CM7 Boot Address0 + */ +__STATIC_INLINE uint16_t LL_SYSCFG_GetCM7BootAddress0(void) +{ + /* Get CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + return (uint16_t)((uint32_t)READ_BIT(SYSCFG->UR2, SYSCFG_UR2_BCM7_ADD0) >> SYSCFG_UR2_BCM7_ADD0_Pos); +#else + return (uint16_t)((uint32_t)READ_BIT(SYSCFG->UR2, SYSCFG_UR2_BOOT_ADD0) >> SYSCFG_UR2_BOOT_ADD0_Pos); +#endif /*DUAL_CORE*/ +} + +/** + * @brief BootCM7 address 1 configuration + * @rmtoll UR3 BOOT_ADD1 LL_SYSCFG_SetCM7BootAddress1 + * @param BootAddress :Specifies the CM7 Boot Address to be loaded in Address1 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCM7BootAddress1(uint16_t BootAddress) +{ + /* Configure CM7 BOOT ADD1 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM7_ADD1, BootAddress); +#else + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BOOT_ADD1, BootAddress); +#endif /*DUAL_CORE*/ +} + +/** + * @brief Get BootCM7 address 1 + * @rmtoll UR3 BOOT_ADD1 LL_SYSCFG_GetCM7BootAddress1 + * @retval Returned the CM7 Boot Address0 + */ +__STATIC_INLINE uint16_t LL_SYSCFG_GetCM7BootAddress1(void) +{ + /* Get CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + return (uint16_t)(READ_BIT(SYSCFG->UR3, SYSCFG_UR3_BCM7_ADD1)); +#else + return (uint16_t)(READ_BIT(SYSCFG->UR3, SYSCFG_UR3_BOOT_ADD1)); +#endif /* DUAL_CORE */ +} + +#if defined(DUAL_CORE) +/** + * @brief BootCM4 address 0 configuration + * @rmtoll UR3 BCM4_ADD0 LL_SYSCFG_SetCM4BootAddress0 + * @param BootAddress :Specifies the CM4 Boot Address to be loaded in Address0 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCM4BootAddress0(uint16_t BootAddress) +{ + /* Configure CM4 BOOT ADD0 */ + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM4_ADD0, ((uint32_t)BootAddress << SYSCFG_UR3_BCM4_ADD0_Pos)); +} + +/** + * @brief Get BootCM4 address 0 + * @rmtoll UR3 BCM4_ADD0 LL_SYSCFG_GetCM4BootAddress0 + * @retval Returned the CM4 Boot Address0 + */ +__STATIC_INLINE uint16_t LL_SYSCFG_GetCM4BootAddress0(void) +{ + /* Get CM4 BOOT ADD0 */ + return (uint16_t)((uint32_t)READ_BIT(SYSCFG->UR3, SYSCFG_UR3_BCM4_ADD0) >> SYSCFG_UR3_BCM4_ADD0_Pos); +} + +/** + * @brief BootCM4 address 1 configuration + * @rmtoll UR4 BCM4_ADD1 LL_SYSCFG_SetCM4BootAddress1 + * @param BootAddress :Specifies the CM4 Boot Address to be loaded in Address1 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCM4BootAddress1(uint16_t BootAddress) +{ + /* Configure CM4 BOOT ADD1 */ + MODIFY_REG(SYSCFG->UR4, SYSCFG_UR4_BCM4_ADD1, BootAddress); +} + +/** + * @brief Get BootCM4 address 1 + * @rmtoll UR4 BCM4_ADD1 LL_SYSCFG_GetCM4BootAddress1 + * @retval Returned the CM4 Boot Address0 + */ +__STATIC_INLINE uint16_t LL_SYSCFG_GetCM4BootAddress1(void) +{ + /* Get CM4 BOOT ADD0 */ + return (uint16_t)(READ_BIT(SYSCFG->UR4, SYSCFG_UR4_BCM4_ADD1)); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Indicates if the flash protected area (Bank 1) is erased by a mass erase + * @rmtoll UR4 MEPAD_BANK1 LL_SYSCFG_IsFlashB1ProtectedAreaErasable + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1ProtectedAreaErasable(void) +{ + return ((READ_BIT(SYSCFG->UR4, SYSCFG_UR4_MEPAD_BANK1) == SYSCFG_UR4_MEPAD_BANK1) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the flash secured area (Bank 1) is erased by a mass erase + * @rmtoll UR5 MESAD_BANK1 LL_SYSCFG_IsFlashB1SecuredAreaErasable + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1SecuredAreaErasable(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_MESAD_BANK1) == SYSCFG_UR5_MESAD_BANK1) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 0 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector0WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector0WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR0_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 1 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector1WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector1WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR1_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 2 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector2WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector2WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR2_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 3 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector3WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector3WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR3_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 4 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector4WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector4WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR4_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 5 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector5WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector5WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR5_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 6 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector6WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector6WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR6_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 7 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector7WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector7WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR7_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Get the protected area start address for Flash bank 1 + * @rmtoll UR6 PABEG_BANK1 LL_SYSCFG_GetFlashB1ProtectedAreaStartAddress + * @retval Returned the protected area start address for Flash bank 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB1ProtectedAreaStartAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR6, SYSCFG_UR6_PABEG_BANK1)); +} + +/** + * @brief Get the protected area end address for Flash bank 1 + * @rmtoll UR6 PAEND_BANK1 LL_SYSCFG_GetFlashB1ProtectedAreaEndAddress + * @retval Returned the protected area end address for Flash bank 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB1ProtectedAreaEndAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR6, SYSCFG_UR6_PAEND_BANK1)); +} + +/** + * @brief Get the secured area start address for Flash bank 1 + * @rmtoll UR7 SABEG_BANK1 LL_SYSCFG_GetFlashB1SecuredAreaStartAddress + * @retval Returned the secured area start address for Flash bank 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB1SecuredAreaStartAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR7, SYSCFG_UR7_SABEG_BANK1)); +} + +/** + * @brief Get the secured area end address for Flash bank 1 + * @rmtoll UR7 SAEND_BANK1 LL_SYSCFG_GetFlashB1SecuredAreaEndAddress + * @retval Returned the secured area end address for Flash bank 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB1SecuredAreaEndAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR7, SYSCFG_UR7_SAEND_BANK1)); +} + +#ifdef SYSCFG_UR8_MEPAD_BANK2 +/** + * @brief Indicates if the flash protected area (Bank 2) is erased by a mass erase + * @rmtoll UR8 MEPAD_BANK2 LL_SYSCFG_IsFlashB2ProtectedAreaErasable + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2ProtectedAreaErasable(void) +{ + return ((READ_BIT(SYSCFG->UR8, SYSCFG_UR8_MEPAD_BANK2) == SYSCFG_UR8_MEPAD_BANK2) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the flash secured area (Bank 2) is erased by a mass erase + * @rmtoll UR8 MESAD_BANK2 LL_SYSCFG_IsFlashB2SecuredAreaErasable + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2SecuredAreaErasable(void) +{ + return ((READ_BIT(SYSCFG->UR8, SYSCFG_UR8_MESAD_BANK2) == SYSCFG_UR8_MESAD_BANK2) ? 1UL : 0UL); +} +#endif /*SYSCFG_UR8_MEPAD_BANK2*/ + +#ifdef SYSCFG_UR9_WRPN_BANK2 +/** + * @brief Indicates if the sector 0 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector0WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector0WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR0_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 1 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector1WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector1WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR1_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 2 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector2WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector2WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR2_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 3 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector3WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector3WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR3_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 4 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector4WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector4WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR4_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 5 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector5WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector5WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR5_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 6 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector6WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector6WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR6_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 7 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector7WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector7WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR7_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Get the protected area start address for Flash bank 2 + * @rmtoll UR9 PABEG_BANK2 LL_SYSCFG_GetFlashB2ProtectedAreaStartAddress + * @retval Returned the protected area start address for Flash bank 2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB2ProtectedAreaStartAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR9, SYSCFG_UR9_PABEG_BANK2)); +} +#endif /*SYSCFG_UR9_WRPN_BANK2*/ + +#ifdef SYSCFG_UR10_PAEND_BANK2 +/** + * @brief Get the protected area end address for Flash bank 2 + * @rmtoll UR10 PAEND_BANK2 LL_SYSCFG_GetFlashB2ProtectedAreaEndAddress + * @retval Returned the protected area end address for Flash bank 2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB2ProtectedAreaEndAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR10, SYSCFG_UR10_PAEND_BANK2)); +} + +/** + * @brief Get the secured area start address for Flash bank 2 + * @rmtoll UR10 SABEG_BANK2 LL_SYSCFG_GetFlashB2SecuredAreaStartAddress + * @retval Returned the secured area start address for Flash bank 2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB2SecuredAreaStartAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR10, SYSCFG_UR10_SABEG_BANK2)); +} +#endif /*SYSCFG_UR10_PAEND_BANK2*/ + +#ifdef SYSCFG_UR11_SAEND_BANK2 +/** + * @brief Get the secured area end address for Flash bank 2 + * @rmtoll UR11 SAEND_BANK2 LL_SYSCFG_GetFlashB2SecuredAreaEndAddress + * @retval Returned the secured area end address for Flash bank 2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB2SecuredAreaEndAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR11, SYSCFG_UR11_SAEND_BANK2)); +} +#endif /*SYSCFG_UR11_SAEND_BANK2*/ + +/** + * @brief Get the Independent Watchdog 1 control mode (Software or Hardware) + * @rmtoll UR11 IWDG1M LL_SYSCFG_GetIWDG1ControlMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IWDG1_SW_CONTROL_MODE + * @arg @ref LL_SYSCFG_IWDG1_HW_CONTROL_MODE + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIWDG1ControlMode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR11, SYSCFG_UR11_IWDG1M)); +} + +#if defined (DUAL_CORE) +/** + * @brief Get the Independent Watchdog 2 control mode (Software or Hardware) + * @rmtoll UR12 IWDG2M LL_SYSCFG_GetIWDG2ControlMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IWDG2_SW_CONTROL_MODE + * @arg @ref LL_SYSCFG_IWDG2_HW_CONTROL_MODE + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIWDG2ControlMode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR12, SYSCFG_UR12_IWDG2M)); +} +#endif /* DUAL_CORE */ + +/** + * @brief Indicates the Secure mode status + * @rmtoll UR12 SECURE LL_SYSCFG_IsSecureModeEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsSecureModeEnabled(void) +{ + return ((READ_BIT(SYSCFG->UR12, SYSCFG_UR12_SECURE) == SYSCFG_UR12_SECURE) ? 1UL : 0UL); +} + +/** + * @brief Indicates if a reset is generated when D1 domain enters DStandby mode + * @rmtoll UR13 D1SBRST LL_SYSCFG_IsD1StandbyGenerateReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsD1StandbyGenerateReset(void) +{ + return ((READ_BIT(SYSCFG->UR13, SYSCFG_UR13_D1SBRST) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Get the secured DTCM RAM size + * @rmtoll UR13 SDRS LL_SYSCFG_GetSecuredDTCMSize + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DTCM_RAM_SIZE_2KB + * @arg @ref LL_SYSCFG_DTCM_RAM_SIZE_4KB + * @arg @ref LL_SYSCFG_DTCM_RAM_SIZE_8KB + * @arg @ref LL_SYSCFG_DTCM_RAM_SIZE_16KB + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetSecuredDTCMSize(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR13, SYSCFG_UR13_SDRS)); +} + +/** + * @brief Indicates if a reset is generated when D1 domain enters DStop mode + * @rmtoll UR14 D1STPRST LL_SYSCFG_IsD1StopGenerateReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsD1StopGenerateReset(void) +{ + return ((READ_BIT(SYSCFG->UR14, SYSCFG_UR14_D1STPRST) == 0U) ? 1UL : 0UL); +} + +#if defined (DUAL_CORE) +/** + * @brief Indicates if a reset is generated when D2 domain enters DStandby mode + * @rmtoll UR14 D2SBRST LL_SYSCFG_IsD2StandbyGenerateReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsD2StandbyGenerateReset(void) +{ + return ((READ_BIT(SYSCFG->UR14, SYSCFG_UR14_D2SBRST) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Indicates if a reset is generated when D2 domain enters DStop mode + * @rmtoll UR15 D2STPRST LL_SYSCFG_IsD2StopGenerateReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsD2StopGenerateReset(void) +{ + return ((READ_BIT(SYSCFG->UR15, SYSCFG_UR15_D2STPRST) == 0U) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @brief Indicates if the independent watchdog is frozen in Standby mode + * @rmtoll UR15 FZIWDGSTB LL_SYSCFG_IsIWDGFrozenInStandbyMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsIWDGFrozenInStandbyMode(void) +{ + return ((READ_BIT(SYSCFG->UR15, SYSCFG_UR15_FZIWDGSTB) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the independent watchdog is frozen in Stop mode + * @rmtoll UR16 FZIWDGSTP LL_SYSCFG_IsIWDGFrozenInStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsIWDGFrozenInStopMode(void) +{ + return ((READ_BIT(SYSCFG->UR16, SYSCFG_UR16_FZIWDGSTP) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the device private key is programmed + * @rmtoll UR16 PKP LL_SYSCFG_IsPrivateKeyProgrammed + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsPrivateKeyProgrammed(void) +{ + return ((READ_BIT(SYSCFG->UR16, SYSCFG_UR16_PKP) == SYSCFG_UR16_PKP) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the Product is working on the full voltage range or not + * @rmtoll UR17 IOHSLV LL_SYSCFG_IsActiveFlag_IOHSLV + * @note When the IOHSLV option bit is set the Product is working below 2.7 V. + * When the IOHSLV option bit is reset the Product is working on the + * full voltage range. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_IOHSLV(void) +{ + return ((READ_BIT(SYSCFG->UR17, SYSCFG_UR17_IOHSLV) == SYSCFG_UR17_IOHSLV) ? 1UL : 0UL); +} + +#ifdef SYSCFG_UR17_TCM_AXI_CFG +/** + * @brief Get the size of ITCM-RAM and AXI-SRAM + * @rmtoll UR17 TCM_AXI_CFG LL_SYSCFG_Get_ITCM_AXI_RAM_Size + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_ITCM_AXI_64KB_320KB + * @arg @ref LL_SYSCFG_ITCM_AXI_128KB_256KB + * @arg @ref LL_SYSCFG_ITCM_AXI_192KB_192KB + * @arg @ref LL_SYSCFG_ITCM_AXI_256KB_128KB + */ +__STATIC_INLINE uint32_t LL_SYSCFG_Get_ITCM_AXI_RAM_Size(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR17, SYSCFG_UR17_TCM_AXI_CFG)); +} +#endif /*SYSCFG_UR17_TCM_AXI_CFG*/ + +#ifdef SYSCFG_UR18_CPU_FREQ_BOOST +/** + * @brief Indicates if the CPU maximum frequency boost is enabled + * @rmtoll UR18 CPU_FREQ_BOOST LL_SYSCFG_IsCpuFreqBoostEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsCpuFreqBoostEnabled(void) +{ + return ((READ_BIT(SYSCFG->UR18, SYSCFG_UR18_CPU_FREQ_BOOST) == SYSCFG_UR18_CPU_FREQ_BOOST) ? 1UL : 0UL); +} +#endif /*SYSCFG_UR18_CPU_FREQ_BOOST*/ + +#endif /*SYSCFG_UR0_RDP*/ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001 + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable D1 Domain/CDomain debug during SLEEP mode + * @rmtoll DBGMCU_CR DBGSLEEP_D1/DBGSLEEP_CD LL_DBGMCU_EnableD1DebugInSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD1DebugInSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + +/** + * @brief Disable D1 Domain/CDomain debug during SLEEP mode + * @rmtoll DBGMCU_CR DBGSLEEP_D1/DBGSLEEP_CD LL_DBGMCU_DisableD1DebugInSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD1DebugInSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + +/** + * @brief Enable D1 Domain/CDomain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D1/DBGSLEEP_CD LL_DBGMCU_EnableD1DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD1DebugInStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Disable D1 Domain/CDomain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D1/DBGSLEEP_CD LL_DBGMCU_DisableD1DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD1DebugInStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Enable D1 Domain/CDomain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D1/DBGSLEEP_CD LL_DBGMCU_EnableD1DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD1DebugInStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +/** + * @brief Disable D1 Domain/CDomain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D1/DBGSLEEP_CD LL_DBGMCU_DisableD1DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD1DebugInStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +#if defined (DUAL_CORE) +/** + * @brief Enable D2 Domain debug during SLEEP mode + * @rmtoll DBGMCU_CR DBGSLEEP_D2 LL_DBGMCU_EnableD2DebugInSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD2DebugInSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Disable D2 Domain debug during SLEEP mode + * @rmtoll DBGMCU_CR DBGSLEEP_D2 LL_DBGMCU_DisableD2DebugInSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD2DebugInSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Enable D2 Domain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D2 LL_DBGMCU_EnableD2DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD2DebugInStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Disable D2 Domain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D2 LL_DBGMCU_DisableD2DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD2DebugInStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Enable D2 Domain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D2 LL_DBGMCU_EnableD2DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD2DebugInStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} + +/** + * @brief Disable D2 Domain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D2 LL_DBGMCU_DisableD2DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD2DebugInStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} +#endif /* DUAL_CORE */ + + +#if defined(DBGMCU_CR_DBG_STOPD3) +/** + * @brief Enable D3 Domain/SRDomain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D3/DBGSTOP_SRD LL_DBGMCU_EnableD3DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD3DebugInStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} + +/** + * @brief Disable D3 Domain/SRDomain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D3/DBGSTOP_SRD LL_DBGMCU_DisableD3DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD3DebugInStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} +#endif /*DBGMCU_CR_DBG_STOPD3*/ + +#if defined(DBGMCU_CR_DBG_STANDBYD3) +/** + * @brief Enable D3 Domain/SRDomain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D3/DBGSTBY_SRD LL_DBGMCU_EnableD3DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD3DebugInStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} + +/** + * @brief Disable D3 Domain/SRDomain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D3/DBGSTBY_SRD LL_DBGMCU_DisableD3DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD3DebugInStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} +#endif /*DBGMCU_CR_DBG_STANDBYD3*/ + +/** + * @brief Enable the trace port clock + * @rmtoll DBGMCU_CR TRACECKEN LL_DBGMCU_EnableTracePortClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableTracePortClock(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TRACECKEN); +} + +/** + * @brief Disable the trace port clock + * @rmtoll DBGMCU_CR TRACECKEN LL_DBGMCU_DisableTracePortClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableTracePortClock(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TRACECKEN); +} + +/** + * @brief Enable the Domain1/CDomain debug clock enable + * @rmtoll DBGMCU_CR CKD1EN/CKCDEN LL_DBGMCU_EnableD1DebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD1DebugClock(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CKD1EN); +} + +/** + * @brief Disable the Domain1/CDomain debug clock enable + * @rmtoll DBGMCU_CR CKD1EN/CKCDEN LL_DBGMCU_DisableD1DebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD1DebugClock(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CKD1EN); +} + +/** + * @brief Enable the Domain3/SRDomain debug clock enable + * @rmtoll DBGMCU_CR CKD3EN/CKSRDEN LL_DBGMCU_EnableD3DebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD3DebugClock(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CKD3EN); +} + +/** + * @brief Disable the Domain3/SRDomain debug clock enable + * @rmtoll DBGMCU_CR CKD3EN/CKSRDEN LL_DBGMCU_DisableD3DebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD3DebugClock(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CKD3EN); +} + +#define LL_DBGMCU_TRGIO_INPUT_DIRECTION 0U +#define LL_DBGMCU_TRGIO_OUTPUT_DIRECTION DBGMCU_CR_DBG_TRGOEN +/** + * @brief Set the direction of the bi-directional trigger pin TRGIO + * @rmtoll DBGMCU_CR TRGOEN LL_DBGMCU_SetExternalTriggerPinDirection\n + * @param PinDirection This parameter can be one of the following values: + * @arg @ref LL_DBGMCU_TRGIO_INPUT_DIRECTION + * @arg @ref LL_DBGMCU_TRGIO_OUTPUT_DIRECTION + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_SetExternalTriggerPinDirection(uint32_t PinDirection) +{ + MODIFY_REG(DBGMCU->CR, DBGMCU_CR_DBG_TRGOEN, PinDirection); +} + +/** + * @brief Get the direction of the bi-directional trigger pin TRGIO + * @rmtoll DBGMCU_CR TRGOEN LL_DBGMCU_GetExternalTriggerPinDirection\n + * @retval Returned value can be one of the following values: + * @arg @ref LL_DBGMCU_TRGIO_INPUT_DIRECTION + * @arg @ref LL_DBGMCU_TRGIO_OUTPUT_DIRECTION + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetExternalTriggerPinDirection(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TRGOEN)); +} + +/** + * @brief Freeze APB1 group1 peripherals + * @rmtoll DBGMCU_APB1LFZ1 TIM2 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM3 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM4 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM5 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM6 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM7 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM12 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM13 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM14 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 LPTIM1 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C1 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C2 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C3 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C5 LL_DBGMCU_APB1_GRP1_FreezePeriph\n (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C5_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1LFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1LFZ1 TIM2 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM3 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM4 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM5 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM6 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM7 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM12 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM13 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM14 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 LPTIM1 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C1 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C2 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C3 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C5 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C5_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1LFZ1, Periphs); +} + +#ifdef DBGMCU_APB1HFZ1_DBG_FDCAN +/** + * @brief Freeze APB1 group2 peripherals + * @rmtoll DBGMCU_APB1HFZ1 FDCAN LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_FDCAN_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1HFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 group2 peripherals + * @rmtoll DBGMCU_APB1HFZ1 FDCAN LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_FDCAN_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1HFZ1, Periphs); +} +#endif /*DBGMCU_APB1HFZ1_DBG_FDCAN*/ + +#if defined(TIM23) || defined(TIM24) +/** + * @brief Freeze APB1 group2 peripherals + * @rmtoll DBGMCU_APB1HFZ1 TIM23 LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * DBGMCU_APB1HFZ1 TIM24 LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM23_STOP + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM24_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1HFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 group2 peripherals + * @rmtoll DBGMCU_APB1HFZ1 TIM23 LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + DBGMCU_APB1HFZ1 TIM24 LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM23_STOP + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM24_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1HFZ1, Periphs); +} +#endif /* TIM23 || TIM24 */ + +/** + * @brief Freeze APB2 peripherals + * @rmtoll DBGMCU_APB2FZ1 TIM1 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM8 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM15 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM16 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM17 LL_DBGMCU_APB2_GRP1_FreezePeriph + * DBGMCU_APB2FZ1 HRTIM LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_HRTIM_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB2FZ1, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBGMCU_APB2FZ1 TIM1 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM8 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM15 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM16 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM17 LL_DBGMCU_APB2_GRP1_FreezePeriph + * DBGMCU_APB2FZ1 HRTIM LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_HRTIM_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB2FZ1, Periphs); +} + +/** + * @brief Freeze APB3 peripherals + * @rmtoll DBGMCU_APB3FZ1 WWDG1 LL_DBGMCU_APB3_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB3_GRP1_WWDG1_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB3_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB3FZ1, Periphs); +} + +/** + * @brief Unfreeze APB3 peripherals + * @rmtoll DBGMCU_APB3FZ1 WWDG1 LL_DBGMCU_APB3_GRP1_UnFreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB3_GRP1_WWDG1_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB3_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB3FZ1, Periphs); +} + +/** + * @brief Freeze APB4 peripherals + * @rmtoll DBGMCU_APB4FZ1 I2C4 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM2 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM3 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM4 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM5 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 RTC LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 WDGLSD1 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB4_GRP1_I2C4_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM2_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM3_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM5_STOP (*) + * @arg @ref LL_DBGMCU_APB4_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_IWDG1_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB4_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB4FZ1, Periphs); +} + +/** + * @brief Unfreeze APB4 peripherals + * @rmtoll DBGMCU_APB4FZ1 I2C4 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM2 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM3 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM4 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM5 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 RTC LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 WDGLSD1 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB4_GRP1_I2C4_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM2_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM3_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM5_STOP (*) + * @arg @ref LL_DBGMCU_APB4_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_IWDG1_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB4_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB4FZ1, Periphs); +} +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 + * @arg @ref LL_FLASH_LATENCY_6 + * @arg @ref LL_FLASH_LATENCY_7 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 + * @arg @ref LL_FLASH_LATENCY_6 + * @arg @ref LL_FLASH_LATENCY_7 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @defgroup SYSTEM_LL_EF_ART ART + * @{ + */ + +/** + * @brief Enable the Cortex-M4 ART cache. + * @rmtoll ART_CTR EN LL_ART_Enable + * @retval None + */ +__STATIC_INLINE void LL_ART_Enable(void) +{ + SET_BIT(ART->CTR, ART_CTR_EN); +} + +/** + * @brief Disable the Cortex-M4 ART cache. + * @rmtoll ART_CTR EN LL_ART_Disable + * @retval None + */ +__STATIC_INLINE void LL_ART_Disable(void) +{ + CLEAR_BIT(ART->CTR, ART_CTR_EN); +} + +/** + * @brief Check if the Cortex-M4 ART cache is enabled + * @rmtoll ART_CTR EN LL_ART_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ART_IsEnabled(void) +{ + return ((READ_BIT(ART->CTR, ART_CTR_EN) == ART_CTR_EN) ? 1UL : 0UL); +} + +/** + * @brief Set the Cortex-M4 ART cache Base Address. + * @rmtoll ART_CTR PCACHEADDR LL_ART_SetBaseAddress + * @param BaseAddress Specifies the Base address of 1 Mbyte address page (cacheable page) + from which the ART accelerator loads code to the cache. + * @retval None + */ +__STATIC_INLINE void LL_ART_SetBaseAddress(uint32_t BaseAddress) +{ + MODIFY_REG(ART->CTR, ART_CTR_PCACHEADDR, (((BaseAddress) >> 12U) & 0x000FFF00UL)); +} + +/** + * @brief Get the Cortex-M4 ART cache Base Address. + * @rmtoll ART_CTR PCACHEADDR LL_ART_GetBaseAddress + * @retval the Base address of 1 Mbyte address page (cacheable page) + from which the ART accelerator loads code to the cache + */ +__STATIC_INLINE uint32_t LL_ART_GetBaseAddress(void) +{ + return (uint32_t)(READ_BIT(ART->CTR, ART_CTR_PCACHEADDR) << 12U); +} +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_SYSTEM_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h new file mode 100644 index 0000000..d1242eb --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h @@ -0,0 +1,4400 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_USART_H +#define STM32H7xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(USART1) || defined(USART2) || defined(USART3) || defined(USART6) \ + || defined(UART4) || defined(UART5) || defined(UART7) || defined(UART8) || defined(UART9) || defined(USART10) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Variables USART Private Variables + * @{ + */ +/* Array used to get the USART prescaler division decimal values versus @ref USART_LL_EC_PRESCALER values */ +static const uint32_t USART_PRESCALER_TAB[] = +{ + 1UL, + 2UL, + 4UL, + 6UL, + 8UL, + 10UL, + 12UL, + 16UL, + 32UL, + 64UL, + 128UL, + 256UL +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref USART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_USART_WriteReg function + * @{ + */ +#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty clear flag */ +#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time clear flag */ +#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection clear flag */ +#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout clear flag */ +#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block clear flag */ +#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun clear flag */ +#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_USART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_USART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */ +#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */ +#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */ +#define LL_USART_ISR_UDR USART_ISR_UDR /*!< SPI Slave underrun error flag */ +#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */ +#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */ +#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_USART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_USART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */ +#define LL_USART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_USART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */ +#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */ +#define LL_USART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_USART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_USART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */ +#define LL_USART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_USART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_USART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_USART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_USART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_USART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_USART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_USART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_USART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_USART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_USART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_USART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_USART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_USART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_USART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection + * @{ + */ +#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */ +#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */ +#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */ +#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_ISR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_EnableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableFIFO(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_DisableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableFIFO(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_IsEnabledFIFO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledFIFO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_SetTXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_GetTXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetTXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_SetRXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_GetRXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetRXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_USART_ConfigFIFOsThreshold + * @param USARTx USART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief USART enabled in STOP Mode. + * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that + * USART clock selection is HSI or LSE in RCC. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_EnableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief USART disabled in STOP Mode. + * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_DisableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_SetDataWidth\n + * CR1 M1 LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_GetDataWidth\n + * CR1 M1 LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_USART_EnableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_USART_DisableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_SetPrescaler + * @param USARTx USART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_GetPrescaler + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_USART_GetPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M0 LL_USART_ConfigCharacter\n + * CR1 M1 LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap + * @param USARTx USART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic + * @param USARTx USART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder + * @param USARTx USART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Enable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Disable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Auto Baud-Rate mode bits + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode + * @param USARTx USART Instance + * @param AutoBaudRateMode This parameter can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + * @retval None + */ +__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode); +} + +/** + * @brief Return Auto Baud-Rate mode + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + */ +__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE)); +} + +/** + * @brief Enable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Disable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Indicate if Receiver Timeout feature is enabled + * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n + * CR2 ADDM7 LL_USART_ConfigNodeAddress + * @param USARTx USART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the USART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_SetWKUPType + * @param USARTx USART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_GetWKUPType + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_USART_GetWKUPType(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling, + uint32_t BaudRate) +{ + uint32_t usartdiv; + uint32_t brrtemp; + + if (PrescalerValue > LL_USART_PRESCALER_DIV256) + { + /* Do not overstep the size of USART_PRESCALER_TAB */ + } + else if (BaudRate == 0U) + { + /* Can Not divide per 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + brrtemp = usartdiv & 0xFFF0U; + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + USARTx->BRR = brrtemp; + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling) +{ + uint32_t usartdiv; + uint32_t brrresult = 0x0U; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (USART_PRESCALER_TAB[(uint8_t)PrescalerValue])); + + usartdiv = USARTx->BRR; + + if (usartdiv == 0U) + { + /* Do not perform a division by 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + if (usartdiv != 0U) + { + brrresult = (periphclkpresc * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = periphclkpresc / usartdiv; + } + } + return (brrresult); +} + +/** + * @brief Set Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_SetRxTimeout + * @param USARTx USART Instance + * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout); +} + +/** + * @brief Get Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_GetRxTimeout + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + */ +__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO)); +} + +/** + * @brief Set Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_SetBlockLength + * @param USARTx USART Instance + * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos); +} + +/** + * @brief Get Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_GetBlockLength + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_USART_GetBlockLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode. + * In transmission mode, it specifies the number of automatic retransmission retries, before + * generating a transmission error (FE bit set). + * In reception mode, it specifies the number or erroneous reception trials, before generating a + * reception error (RXNE and PE bits set) + * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos)); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_SPI_SLAVE Configuration functions related to SPI Slave feature + * @{ + */ +/** + * @brief Enable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_EnableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlave(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Disable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_DisableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlave(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Indicate if SPI Synchronous Slave mode is enabled + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_IsEnabledSPISlave + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlave(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_SLVEN) == (USART_CR2_SLVEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave Selection depends on NSS input pin + * (The slave is selected when NSS is low and deselected when NSS is high). + * @rmtoll CR2 DIS_NSS LL_USART_EnableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlaveSelect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Disable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave will be always selected and NSS input pin will be ignored. + * @rmtoll CR2 DIS_NSS LL_USART_DisableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlaveSelect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Indicate if SPI Slave Selection depends on NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 DIS_NSS LL_USART_IsEnabledSPISlaveSelect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlaveSelect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_DIS_NSS) != (USART_CR2_DIS_NSS)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_EnableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_DisableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity + * @param USARTx USART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll ISR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll ISR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#define LL_USART_IsActiveFlag_RXNE LL_USART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Read Data Register or USART RX FIFO Not Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXNE_RXFNE LL_USART_IsActiveFlag_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#define LL_USART_IsActiveFlag_TXE LL_USART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Transmit Data Register Empty or USART TX FIFO Not Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXE_TXFNF LL_USART_IsActiveFlag_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS interrupt Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Time Out Flag is set or not + * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Flag is set or not + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the SPI Slave Underrun error flag is set or not + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ISR UDR LL_USART_IsActiveFlag_UDR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_UDR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_UDR) == (USART_ISR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Error Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Busy Flag is set or not + * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Flag is set or not + * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from stop mode Flag is set or not + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFE LL_USART_IsActiveFlag_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFF LL_USART_IsActiveFlag_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Flag is set or not + * @rmtoll ISR TCBGT LL_USART_IsActiveFlag_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFT LL_USART_IsActiveFlag_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFT LL_USART_IsActiveFlag_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise Error detected Flag + * @rmtoll ICR NECF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear TX FIFO Empty Flag + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ICR TXFECF LL_USART_ClearFlag_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TXFE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TXFECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear Smartcard Transmission Complete Before Guard Time Flag + * @rmtoll ICR TCBGTCF LL_USART_ClearFlag_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_LBDCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Receiver Time Out Flag + * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_RTOCF); +} + +/** + * @brief Clear End Of Block Flag + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_EOBCF); +} + +/** + * @brief Clear SPI Slave Underrun Flag + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ICR UDRCF LL_USART_ClearFlag_UDR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_UDR(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_UDRCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_USART_ClearFlag_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_USART_EnableIT_RXNE LL_USART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_EnableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#define LL_USART_EnableIT_TXE LL_USART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_EnableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_EnableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Enable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_EnableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_USART_EnableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_EnableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_EnableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_EnableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_USART_DisableIT_RXNE LL_USART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_DisableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#define LL_USART_DisableIT_TXE LL_USART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_DisableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_DisableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Disable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_DisableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_DisableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_DisableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_DisableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_DisableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#define LL_USART_IsEnabledIT_RXNE LL_USART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART RX Not Empty and USART RX FIFO Not Empty Interrupt is enabled or disabled. + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_IsEnabledIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#define LL_USART_IsEnabledIT_TXE LL_USART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART TX Empty and USART TX FIFO Not Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_IsEnabledIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled. + * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_IsEnabledIT_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_IsEnabledIT_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART TX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_IsEnabledIT_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_IsEnabledIT_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART RX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_IsEnabledIT_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr + * @param USARTx USART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(const USART_TypeDef *USARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(USARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(USARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(const USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(const USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->TDR = (uint16_t)(Value & 0x1FFUL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request an Automatic Baud Rate measurement on next received data frame + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ); +} + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put USART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @brief Request a Transmit data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || USART6 || UART4 || UART5 || UART7 || UART8 || UART9 || USART10 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_USART_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usb.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usb.h new file mode 100644 index 0000000..9cfe6a1 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usb.h @@ -0,0 +1,578 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_usb.h + * @author MCD Application Team + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_USB_H +#define STM32H7xx_LL_USB_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +#ifndef HAL_USB_TIMEOUT +#define HAL_USB_TIMEOUT 0xF000000U +#endif /* define HAL_USB_TIMEOUT */ + +#ifndef HAL_USB_CURRENT_MODE_MAX_DELAY_MS +#define HAL_USB_CURRENT_MODE_MAX_DELAY_MS 200U +#endif /* define HAL_USB_CURRENT_MODE_MAX_DELAY_MS */ + +/** + * @brief USB Mode definition + */ + +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1, + USB_DRD_MODE = 2 +} USB_ModeTypeDef; + +/** + * @brief URB States definition + */ +typedef enum +{ + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +} USB_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum +{ + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_ACK, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR +} USB_HCStateTypeDef; + + +/** + * @brief USB Instance Initialization Structure definition + */ +typedef struct +{ + uint8_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t dma_enable; /*!< USB DMA state. + If DMA is not supported this parameter shall be set by default to zero */ + + uint8_t speed; /*!< USB Core speed. + This parameter can be any value of @ref PCD_Speed/HCD_Speed + (HCD_SPEED_xxx, HCD_SPEED_xxx) */ + + uint8_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ + + uint8_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ + + uint8_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint8_t low_power_enable; /*!< Enable or disable the low Power Mode. */ + + uint8_t lpm_enable; /*!< Enable or disable Link Power Management. */ + + uint8_t battery_charging_enable; /*!< Enable or disable Battery charging. */ + + uint8_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint8_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ + + uint8_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ + +} USB_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_iso_incomplete; /*!< Endpoint isoc condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_LL_EP_Type */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + + uint8_t even_odd_frame; /*!< IFrame parity + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t tx_fifo_num; /*!< Transmission FIFO number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ + + uint32_t xfer_size; /*!< requested transfer size */ +} USB_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t speed; /*!< USB Host Channel speed. + This parameter can be any value of @ref HCD_Device_Speed: + (HCD_DEVICE_SPEED_xxx) */ + + uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ + uint8_t do_ssplit; /*!< Enable start split transaction in HS mode. */ + uint8_t do_csplit; /*!< Enable complete split transaction in HS mode. */ + uint8_t ep_ss_schedule; /*!< Enable periodic endpoint start split schedule . */ + uint32_t iso_splt_xactPos; /*!< iso split transfer transaction position. */ + + uint8_t hub_port_nbr; /*!< USB HUB port number */ + uint8_t hub_addr; /*!< USB HUB address */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_LL_EP_Type */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t XferSize; /*!< OTG Channel transfer size. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ + + uint32_t ErrCnt; /*!< Host channel error count. */ + uint32_t NyetErrCnt; /*!< Complete Split NYET Host channel error count. */ + + USB_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_URBStateTypeDef */ + + USB_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_HCStateTypeDef */ +} USB_HCTypeDef; + +typedef USB_ModeTypeDef USB_OTG_ModeTypeDef; +typedef USB_CfgTypeDef USB_OTG_CfgTypeDef; +typedef USB_EPTypeDef USB_OTG_EPTypeDef; +typedef USB_URBStateTypeDef USB_OTG_URBStateTypeDef; +typedef USB_HCStateTypeDef USB_OTG_HCStateTypeDef; +typedef USB_HCTypeDef USB_OTG_HCTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @defgroup USB_OTG_CORE VERSION ID + * @{ + */ +#define USB_OTG_CORE_ID_300A 0x4F54300AU +#define USB_OTG_CORE_ID_310A 0x4F54310AU +/** + * @} + */ + +/** @defgroup USB_Core_Mode_ USB Core Mode + * @{ + */ +#define USB_OTG_MODE_DEVICE 0U +#define USB_OTG_MODE_HOST 1U +#define USB_OTG_MODE_DRD 2U +/** + * @} + */ + +/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed + * @{ + */ +#define USB_OTG_SPEED_HIGH 0U +#define USB_OTG_SPEED_HIGH_IN_FULL 1U +#define USB_OTG_SPEED_FULL 3U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY + * @{ + */ +#define USB_OTG_ULPI_PHY 1U +#define USB_OTG_EMBEDDED_PHY 2U +/** + * @} + */ + +/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value + * @{ + */ +#ifndef USBD_HS_TRDT_VALUE +#define USBD_HS_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +#ifndef USBD_FS_TRDT_VALUE +#define USBD_FS_TRDT_VALUE 5U +#define USBD_DEFAULT_TRDT_VALUE 9U +#endif /* USBD_HS_TRDT_VALUE */ +/** + * @} + */ + +/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS + * @{ + */ +#define USB_OTG_HS_MAX_PACKET_SIZE 512U +#define USB_OTG_FS_MAX_PACKET_SIZE 64U +#define USB_OTG_MAX_EP0_SIZE 64U +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency + * @{ + */ +#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) +#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) +#define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) +/** + * @} + */ + +/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval + * @{ + */ +#define DCFG_FRAME_INTERVAL_80 0U +#define DCFG_FRAME_INTERVAL_85 1U +#define DCFG_FRAME_INTERVAL_90 2U +#define DCFG_FRAME_INTERVAL_95 3U +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define EP_MPS_64 0U +#define EP_MPS_32 1U +#define EP_MPS_16 2U +#define EP_MPS_8 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U +#define EP_TYPE_MSK 3U +/** + * @} + */ + +/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed + * @{ + */ +#define EP_SPEED_LOW 0U +#define EP_SPEED_FULL 1U +#define EP_SPEED_HIGH 2U +/** + * @} + */ + +/** @defgroup USB_LL_CH_PID_Type USB Low Layer Channel PID Type + * @{ + */ +#define HC_PID_DATA0 0U +#define HC_PID_DATA2 1U +#define HC_PID_DATA1 2U +#define HC_PID_SETUP 3U +/** + * @} + */ + +/** @defgroup USB_LL Device Speed + * @{ + */ +#define USBD_HS_SPEED 0U +#define USBD_HSINFS_SPEED 1U +#define USBH_HS_SPEED 0U +#define USBD_FS_SPEED 2U +#define USBH_FSLS_SPEED 1U +/** + * @} + */ + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines + * @{ + */ +#define STS_GOUT_NAK 1U +#define STS_DATA_UPDT 2U +#define STS_XFER_COMP 3U +#define STS_SETUP_COMP 4U +#define STS_SETUP_UPDT 6U +/** + * @} + */ + +/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines + * @{ + */ +#define HCFG_30_60_MHZ 0U +#define HCFG_48_MHZ 1U +#define HCFG_6_MHZ 2U +/** + * @} + */ + +/** @defgroup USB_LL_HFIR_Defines USB Low Layer frame interval Defines + * @{ + */ +#define HFIR_6_MHZ 6000U +#define HFIR_60_MHZ 60000U +#define HFIR_48_MHZ 48000U +/** + * @} + */ + +/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines + * @{ + */ +#define HPRT0_PRTSPD_HIGH_SPEED 0U +#define HPRT0_PRTSPD_FULL_SPEED 1U +#define HPRT0_PRTSPD_LOW_SPEED 2U +/** + * @} + */ + +#define HCCHAR_CTRL 0U +#define HCCHAR_ISOC 1U +#define HCCHAR_BULK 2U +#define HCCHAR_INTR 3U + +#define GRXSTS_PKTSTS_IN 2U +#define GRXSTS_PKTSTS_IN_XFER_COMP 3U +#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U +#define GRXSTS_PKTSTS_CH_HALTED 7U + +#define CLEAR_INTERRUPT_MASK 0xFFFFFFFFU + +#define HC_MAX_PKT_CNT 256U +#define ISO_SPLT_MPS 188U + +#define HCSPLT_BEGIN 1U +#define HCSPLT_MIDDLE 2U +#define HCSPLT_END 3U +#define HCSPLT_FULL 4U + +#define TEST_J 1U +#define TEST_K 2U +#define TEST_SE0_NAK 3U +#define TEST_PACKET 4U +#define TEST_FORCE_EN 5U + +#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) +#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) + +#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) +#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ + + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) + +#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ + + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) + +#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) + +#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) +#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ + + USB_OTG_HOST_CHANNEL_BASE\ + + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) + + +#define EP_ADDR_MSK 0xFU +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) +#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) + +#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) +#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(const USB_OTG_GlobalTypeDef *USBx, uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); +HAL_StatusTypeDef USB_ActivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); +HAL_StatusTypeDef USB_WritePacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len, uint8_t dma); + +void *USB_ReadPacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); +HAL_StatusTypeDef USB_EPSetStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStopXfer(const USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_SetDevAddress(const USB_OTG_GlobalTypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateSetup(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(const USB_OTG_GlobalTypeDef *USBx, uint8_t dma, const uint8_t *psetup); +uint8_t USB_GetDevSpeed(const USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetMode(const USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx); +uint32_t USB_ReadChInterrupts(const USB_OTG_GlobalTypeDef *USBx, uint8_t chnum); +uint32_t USB_ReadDevAllOutEpInterrupt(const USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt(const USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); + +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_InitFSLSPClkSel(const USB_OTG_GlobalTypeDef *USBx, uint8_t freq); +HAL_StatusTypeDef USB_ResetPort(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DriveVbus(const USB_OTG_GlobalTypeDef *USBx, uint8_t state); +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx); +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx); +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps); +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, + USB_OTG_HCTypeDef *hc, uint8_t dma); + +uint32_t USB_HC_ReadInterrupt(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Halt(const USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); +HAL_StatusTypeDef USB_DoPing(const USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32H7xx_LL_USB_H */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h new file mode 100644 index 0000000..41a5aa4 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h @@ -0,0 +1,401 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + ****************************************************************************** + * @attention + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_UTILS_H +#define STM32H7xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include "stm32h7xx_ll_system.h" +#include "stm32h7xx_ll_bus.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLM; /*!< Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 0 and Max_Data = 63 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetM(). */ + + uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 4 and Max_Data = 512 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetN(). */ + + uint32_t PLLP; /*!< Division for the main system clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 128 + odd division factors are not allowed + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetP(). */ + + uint32_t FRACN; /*!< Fractional part of the multiplication factor for PLL VCO. + This parameter can be a value between 0 and 8191 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetFRACN(). */ + + uint32_t VCO_Input; /*!< PLL clock Input range. + This parameter can be a value of @ref RCC_LL_EC_PLLINPUTRANGE + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetVCOInputRange(). */ + + uint32_t VCO_Output; /*!< PLL clock Output range. + This parameter can be a value of @ref RCC_LL_EC_PLLVCORANGE + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetVCOOutputRange(). */ + +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t SYSCLKDivider; /*!< The System clock (SYSCLK) divider. This clock is derived from the PLL output. + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetSysPrescaler(). */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_AHB_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB2_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB2Prescaler(). */ + + uint32_t APB3CLKDivider; /*!< The APB2 clock (PCLK3) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB3_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB3Prescaler(). */ + + uint32_t APB4CLKDivider; /*!< The APB4 clock (PCLK4) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB4_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB4Prescaler(). */ + +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define LL_UTILS_PACKAGETYPE_LQFP100 LL_SYSCFG_LQFP100_PACKAGE /*!< LQFP100 package type */ +#define LL_UTILS_PACKAGETYPE_TQFP144 LL_SYSCFG_TQFP144_PACKAGE /*!< TQFP144 package type */ +#define LL_UTILS_PACKAGETYPE_TQFP176_UFBGA176 LL_SYSCFG_TQFP176_UFBGA176_PACKAGE /*!< TQFP176 or UFBGA176 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP208_TFBGA240 LL_SYSCFG_LQFP208_TFBGA240_PACKAGE /*!< LQFP208 or TFBGA240 package type */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define LL_UTILS_PACKAGETYPE_LQFP64 0x00000000UL /*!< LQFP64 package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_LQFP100 0x00000001UL /*!< TFBGA100 or LQFP100 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP100_SMPS 0x00000002UL /*!< LQFP100 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_SMPS 0x00000003UL /*!< TFBGA100 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP132_SMPS 0x00000004UL /*!< WLCSP132 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144 0x00000005UL /*!< LQFP144 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144_SMPS 0x00000006UL /*!< LQFP144 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA169 0x00000007UL /*!< UFBGA169 package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA176_LQFP176 0x00000008UL /*!< UFBGA176 or LQFP176 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP176_SMPS 0x00000009UL /*!< LQFP176 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA176_SMPS 0x0000000AUL /*!< UFBGA176 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA216 0x0000000CUL /*!< TFBGA216 package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA225 0x0000000EUL /*!< TFBGA225 package type */ +#elif (STM32H7_DEV_ID == 0x483UL) +#define LL_UTILS_PACKAGETYPE_VFQFPN68_INDUS LL_SYSCFG_VFQFPN68_INDUS_PACKAGE /*!< VFQFPN68 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_LQFP100 LL_SYSCFG_TFBGA100_LQFP100_PACKAGE /*!< TFBGA100 or LQFP100 Legacy package type */ +#define LL_UTILS_PACKAGETYPE_LQFP100_INDUS LL_SYSCFG_LQFP100_INDUS_PACKAGE /*!< LQFP100 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_INDUS LL_SYSCFG_TFBGA100_INDUS_PACKAGE /*!< TFBGA100 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP115_INDUS LL_SYSCFG_WLCSP115_INDUS_PACKAGE /*!< WLCSP115 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144 LL_SYSCFG_LQFP144_PACKAGE /*!< LQFP144 Legacy package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA144 LL_SYSCFG_UFBGA144_PACKAGE /*!< UFBGA144 Legacy package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144_INDUS LL_SYSCFG_LQFP144_INDUS_PACKAGE /*!< LQFP144 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA169_INDUS LL_SYSCFG_UFBGA169_INDUS_PACKAGE /*!< UFBGA169 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA176PLUS25_INDUS LL_SYSCFG_UFBGA176PLUS25_INDUS_PACKAGE /*!< UFBGA176+25 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_LQFP176_INDUS LL_SYSCFG_LQFP176_INDUS_PACKAGE /*!< LQFP176 Industrial package type */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS))); +} + +/** + * @brief Get Package type + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100 + * @arg @ref LL_UTILS_PACKAGETYPE_TQFP144 + * @arg @ref LL_UTILS_PACKAGETYPE_TQFP176_UFBGA176 + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP208_TFBGA240 + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP64 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA100_LQFP100 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA100_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP132_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA176_LQFP176 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP176_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA176_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA216 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA225 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_VFQFPN68_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA100_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP115_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA144 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA176+25_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP176_INDUS (*) + * + * (*) Packages available on some STM32H7 lines only. + * @note For some SM32H7 lines, enabling the SYSCFG clock is mandatory. + the SYSCFG clock enabling is ensured by LL_APB4_GRP1_EnableClock + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ +#if defined(SYSCFG_PKGR_PKG) + + return LL_SYSCFG_GetPackage(); +#else + return (uint16_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS))); + +#endif /* SYSCFG_PKGR_PKG */ +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Frequency of Ticks (Hz) + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t CPU_Frequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t CPU_Frequency); +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, + uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_UTILS_H */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/LICENSE.txt b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/LICENSE.txt new file mode 100644 index 0000000..3edc4d1 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/LICENSE.txt @@ -0,0 +1,6 @@ +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the BSD-3-Clause license shall apply. +You may obtain a copy of the BSD-3-Clause at: +https://opensource.org/licenses/BSD-3-Clause diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c new file mode 100644 index 0000000..35eeb7e --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c @@ -0,0 +1,1312 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** + * @brief STM32H7xx HAL Driver version number + */ +#define __STM32H7xx_HAL_VERSION_MAIN (0x01UL) /*!< [31:24] main version */ +#define __STM32H7xx_HAL_VERSION_SUB1 (0x0BUL) /*!< [23:16] sub1 version */ +#define __STM32H7xx_HAL_VERSION_SUB2 (0x03UL) /*!< [15:8] sub2 version */ +#define __STM32H7xx_HAL_VERSION_RC (0x00UL) /*!< [7:0] release candidate */ +#define __STM32H7xx_HAL_VERSION ((__STM32H7xx_HAL_VERSION_MAIN << 24)\ + |(__STM32H7xx_HAL_VERSION_SUB1 << 16)\ + |(__STM32H7xx_HAL_VERSION_SUB2 << 8 )\ + |(__STM32H7xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) +#define VREFBUF_TIMEOUT_VALUE (uint32_t)10 /* 10 ms */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Exported variables --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface the NVIC allocation and initial clock + configuration. It initializes the systick also when timeout is needed + and the backup domain when enabled. + (+) De-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief This function is used to initialize the HAL Library; it must be the first + * instruction to be executed in the main program (before to call any other + * HAL function), it performs the following: + * Configures the SysTick to generate an interrupt each 1 millisecond, + * which is clocked by the HSI (at this stage, the clock is not yet + * configured and thus the system is running from the internal HSI at 16 MHz). + * Set NVIC Group Priority to 4. + * Calls the HAL_MspInit() callback function defined in user file + * "stm32h7xx_hal_msp.c" to do the global low level hardware initialization + * + * @note SysTick is used as time base for the HAL_Delay() function, the application + * need to ensure that the SysTick time base is always set to 1 millisecond + * to have correct HAL operation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + +uint32_t common_system_clock; + +#if defined(DUAL_CORE) && defined(CORE_CM4) + /* Configure Cortex-M4 Instruction cache through ART accelerator */ + __HAL_RCC_ART_CLK_ENABLE(); /* Enable the Cortex-M4 ART Clock */ + __HAL_ART_CONFIG_BASE_ADDRESS(0x08100000UL); /* Configure the Cortex-M4 ART Base address to the Flash Bank 2 : */ + __HAL_ART_ENABLE(); /* Enable the Cortex-M4 ART */ +#endif /* DUAL_CORE && CORE_CM4 */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Update the SystemCoreClock global variable */ +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos]) & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE)>> RCC_CDCFGR1_CDCPRE_Pos]) & 0x1FU); +#endif + + /* Update the SystemD2Clock global variable */ +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)>> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + return HAL_ERROR; + } + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the systick. + * This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_AHB3_FORCE_RESET(); + __HAL_RCC_AHB3_RELEASE_RESET(); + + __HAL_RCC_AHB1_FORCE_RESET(); + __HAL_RCC_AHB1_RELEASE_RESET(); + + __HAL_RCC_AHB2_FORCE_RESET(); + __HAL_RCC_AHB2_RELEASE_RESET(); + + __HAL_RCC_AHB4_FORCE_RESET(); + __HAL_RCC_AHB4_RELEASE_RESET(); + + __HAL_RCC_APB3_FORCE_RESET(); + __HAL_RCC_APB3_RELEASE_RESET(); + + __HAL_RCC_APB1L_FORCE_RESET(); + __HAL_RCC_APB1L_RELEASE_RESET(); + + __HAL_RCC_APB1H_FORCE_RESET(); + __HAL_RCC_APB1H_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_APB4_FORCE_RESET(); + __HAL_RCC_APB4_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * the SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/ + if((uint32_t)uwTickFreq == 0UL) + { + return HAL_ERROR; + } + + /* Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000UL / (uint32_t)uwTickFreq)) > 0U) + { + return HAL_ERROR; + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup HAL_Group2 + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during SLEEP mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in Systick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval Status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval Tick frequency. + * Value of @ref HAL_TickFreqTypeDef. + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32H7xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE) >> 16); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Return the first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Return the second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Return the third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.5 V. + * This requires VDDA equal to or higher than 2.8 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.048 V. + * This requires VDDA equal to or higher than 2.4 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE2: VREF_OUT3 around 1.8 V. + * This requires VDDA equal to or higher than 2.1 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE3: VREF_OUT4 around 1.5 V. + * This requires VDDA equal to or higher than 1.8 V. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output. + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @retval None + */ +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0UL) + { + if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_SYSCFG_DisableVREFBUF(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +#if defined(SYSCFG_PMCR_EPIS_SEL) +/** + * @brief Ethernet PHY Interface Selection either MII or RMII + * @param SYSCFG_ETHInterface: Selects the Ethernet PHY interface + * This parameter can be one of the following values: + * @arg SYSCFG_ETH_MII : Select the Media Independent Interface + * @arg SYSCFG_ETH_RMII: Select the Reduced Media Independent Interface + * @retval None + */ +void HAL_SYSCFG_ETHInterfaceSelect(uint32_t SYSCFG_ETHInterface) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_ETHERNET_CONFIG(SYSCFG_ETHInterface)); + + MODIFY_REG(SYSCFG->PMCR, SYSCFG_PMCR_EPIS_SEL, (uint32_t)(SYSCFG_ETHInterface)); +} +#endif /* SYSCFG_PMCR_EPIS_SEL */ + +/** + * @brief Analog Switch control for dual analog pads. + * @param SYSCFG_AnalogSwitch: Selects the analog pad + * This parameter can be one or a combination of the following values: + * @arg SYSCFG_SWITCH_PA0 : Select PA0 analog switch + * @arg SYSCFG_SWITCH_PA1: Select PA1 analog switch + * @arg SYSCFG_SWITCH_PC2 : Select PC2 analog switch + * @arg SYSCFG_SWITCH_PC3: Select PC3 analog switch + * @param SYSCFG_SwitchState: Open or Close the analog switch between dual pads (PXn and PXn_C) + * This parameter can be one or a combination of the following values: + * @arg SYSCFG_SWITCH_PA0_OPEN + * @arg SYSCFG_SWITCH_PA0_CLOSE + * @arg SYSCFG_SWITCH_PA1_OPEN + * @arg SYSCFG_SWITCH_PA1_CLOSE + * @arg SYSCFG_SWITCH_PC2_OPEN + * @arg SYSCFG_SWITCH_PC2_CLOSE + * @arg SYSCFG_SWITCH_PC3_OPEN + * @arg SYSCFG_SWITCH_PC3_CLOSE + * @retval None + */ + +void HAL_SYSCFG_AnalogSwitchConfig(uint32_t SYSCFG_AnalogSwitch , uint32_t SYSCFG_SwitchState ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_ANALOG_SWITCH(SYSCFG_AnalogSwitch)); + assert_param(IS_SYSCFG_SWITCH_STATE(SYSCFG_SwitchState)); + + MODIFY_REG(SYSCFG->PMCR, (uint32_t) SYSCFG_AnalogSwitch, (uint32_t)(SYSCFG_SwitchState)); +} + +#if defined(SYSCFG_PMCR_BOOSTEN) +/** + * @brief Enables the booster to reduce the total harmonic distortion of the analog + * switch when the supply voltage is lower than 2.7 V. + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +void HAL_SYSCFG_EnableBOOST(void) +{ + SET_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} + +/** + * @brief Disables the booster + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +void HAL_SYSCFG_DisableBOOST(void) +{ + CLEAR_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} +#endif /* SYSCFG_PMCR_BOOSTEN */ + +#if defined (SYSCFG_UR2_BOOT_ADD0) || defined (SYSCFG_UR2_BCM7_ADD0) +/** + * @brief BootCM7 address 0 configuration + * @param BootRegister :Specifies the Boot Address register (Address0 or Address1) + * This parameter can be one of the following values: + * @arg SYSCFG_BOOT_ADDR0 : Select the boot address0 + * @arg SYSCFG_BOOT_ADDR1: Select the boot address1 + * @param BootAddress :Specifies the CM7 Boot Address to be loaded in Address0 or Address1 + * @retval None + */ +void HAL_SYSCFG_CM7BootAddConfig(uint32_t BootRegister, uint32_t BootAddress) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_BOOT_REGISTER(BootRegister)); + assert_param(IS_SYSCFG_BOOT_ADDRESS(BootAddress)); + if ( BootRegister == SYSCFG_BOOT_ADDR0 ) + { + /* Configure CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BCM7_ADD0, ((BootAddress >> 16) << SYSCFG_UR2_BCM7_ADD0_Pos)); +#else + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BOOT_ADD0, ((BootAddress >> 16) << SYSCFG_UR2_BOOT_ADD0_Pos)); +#endif /*DUAL_CORE*/ + } + else + { + /* Configure CM7 BOOT ADD1 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM7_ADD1, (BootAddress >> 16)); +#else + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BOOT_ADD1, (BootAddress >> 16)); +#endif /*DUAL_CORE*/ + } +} +#endif /* SYSCFG_UR2_BOOT_ADD0 || SYSCFG_UR2_BCM7_ADD0 */ + +#if defined(DUAL_CORE) +/** + * @brief BootCM4 address 0 configuration + * @param BootRegister :Specifies the Boot Address register (Address0 or Address1) + * This parameter can be one of the following values: + * @arg SYSCFG_BOOT_ADDR0 : Select the boot address0 + * @arg SYSCFG_BOOT_ADDR1: Select the boot address1 + * @param BootAddress :Specifies the CM4 Boot Address to be loaded in Address0 or Address1 + * @retval None + */ +void HAL_SYSCFG_CM4BootAddConfig(uint32_t BootRegister, uint32_t BootAddress) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_BOOT_REGISTER(BootRegister)); + assert_param(IS_SYSCFG_BOOT_ADDRESS(BootAddress)); + + if ( BootRegister == SYSCFG_BOOT_ADDR0 ) + { + /* Configure CM4 BOOT ADD0 */ + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM4_ADD0, ((BootAddress >> 16)<< SYSCFG_UR3_BCM4_ADD0_Pos)); + } + + else + { + /* Configure CM4 BOOT ADD1 */ + MODIFY_REG(SYSCFG->UR4, SYSCFG_UR4_BCM4_ADD1, (BootAddress >> 16)); + } +} + +/** + * @brief Enables the Cortex-M7 boot + * @retval None + */ +void HAL_SYSCFG_EnableCM7BOOT(void) +{ + SET_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM7); +} + +/** + * @brief Disables the Cortex-M7 boot + * @note Disabling the boot will gate the CPU clock + * @retval None + */ +void HAL_SYSCFG_DisableCM7BOOT(void) +{ + CLEAR_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM7) ; +} + +/** + * @brief Enables the Cortex-M4 boot + * @retval None + */ +void HAL_SYSCFG_EnableCM4BOOT(void) +{ + SET_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM4); +} + +/** + * @brief Disables the Cortex-M4 boot + * @note Disabling the boot will gate the CPU clock + * @retval None + */ +void HAL_SYSCFG_DisableCM4BOOT(void) +{ + CLEAR_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM4); +} +#endif /*DUAL_CORE*/ +/** + * @brief Enables the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +void HAL_EnableCompensationCell(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN) ; +} + +/** + * @brief Power-down the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +void HAL_DisableCompensationCell(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN); +} + + +/** + * @brief To Enable optimize the I/O speed when the product voltage is low. + * @note This bit is active only if PRODUCT_BELOW_25V user option bit is set. It must be + * used only if the product supply voltage is below 2.5 V. Setting this bit when VDD is + * higher than 2.5 V might be destructive. + * @retval None + */ +void HAL_SYSCFG_EnableIOSpeedOptimize(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + SET_BIT(SYSCFG->CCCSR, (SYSCFG_CCCSR_HSLV0| SYSCFG_CCCSR_HSLV1 | SYSCFG_CCCSR_HSLV2 | SYSCFG_CCCSR_HSLV3)); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @note This bit is active only if PRODUCT_BELOW_25V user option bit is set. It must be + * used only if the product supply voltage is below 2.5 V. Setting this bit when VDD is + * higher than 2.5 V might be destructive. + * @retval None + */ +void HAL_SYSCFG_DisableIOSpeedOptimize(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + CLEAR_BIT(SYSCFG->CCCSR, (SYSCFG_CCCSR_HSLV0| SYSCFG_CCCSR_HSLV1 | SYSCFG_CCCSR_HSLV2 | SYSCFG_CCCSR_HSLV3)); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_CompCode: Selects the code to be applied for the I/O compensation cell + * This parameter can be one of the following values: + * @arg SYSCFG_CELL_CODE : Select Code from the cell (available in the SYSCFG_CCVR) + * @arg SYSCFG_REGISTER_CODE: Select Code from the SYSCFG compensation cell code register (SYSCFG_CCCR) + * @retval None + */ +void HAL_SYSCFG_CompensationCodeSelect(uint32_t SYSCFG_CompCode) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_SELECT(SYSCFG_CompCode)); + MODIFY_REG(SYSCFG->CCCSR, SYSCFG_CCCSR_CS, (uint32_t)(SYSCFG_CompCode)); +} + +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_PMOSCode: PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @param SYSCFG_NMOSCode: NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +void HAL_SYSCFG_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_PMOSCode)); + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_NMOSCode)); + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_NCC|SYSCFG_CCCR_PCC, (((uint32_t)(SYSCFG_PMOSCode)<< 4)|(uint32_t)(SYSCFG_NMOSCode)) ); +} + +#if defined(SYSCFG_CCCR_NCC_MMC) +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_PMOSCode: VDDMMC PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @param SYSCFG_NMOSCode: VDDMMC NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +void HAL_SYSCFG_VDDMMC_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_PMOSCode)); + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_NMOSCode)); + MODIFY_REG(SYSCFG->CCCR, (SYSCFG_CCCR_NCC_MMC | SYSCFG_CCCR_PCC_MMC), (((uint32_t)(SYSCFG_PMOSCode)<< 4)|(uint32_t)(SYSCFG_NMOSCode)) ); +} +#endif /* SYSCFG_CCCR_NCC_MMC */ + +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT0) +/** @brief SYSCFG ADC2 internal input alternate connection macros + * @param Adc2AltRout0 This parameter can be a value of : + * @arg @ref SYSCFG_ADC2_ROUT0_DAC1_1 DAC1_out1 connected to ADC2 VINP[16] + * @arg @ref SYSCFG_ADC2_ROUT0_VBAT4 VBAT/4 connected to ADC2 VINP[16] + */ +void HAL_SYSCFG_ADC2ALT_Rout0Config(uint32_t Adc2AltRout0) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_ADC2ALT_ROUT0(Adc2AltRout0)); + + MODIFY_REG(SYSCFG->ADC2ALT, SYSCFG_ADC2ALT_ADC2_ROUT0, Adc2AltRout0); +} +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT0*/ + +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT1) +/** @brief SYSCFG ADC2 internal input alternate connection macros + * @param Adc2AltRout1 This parameter can be a value of : + * @arg @ref SYSCFG_ADC2_ROUT1_DAC1_2 DAC1_out2 connected to ADC2 VINP[17] + * @arg @ref SYSCFG_ADC2_ROUT1_VREFINT VREFINT connected to ADC2 VINP[17] + */ +void HAL_SYSCFG_ADC2ALT_Rout1Config(uint32_t Adc2AltRout1) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_ADC2ALT_ROUT1(Adc2AltRout1)); + + MODIFY_REG(SYSCFG->ADC2ALT, SYSCFG_ADC2ALT_ADC2_ROUT1, Adc2AltRout1); +} +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT1*/ + +/** + * @brief Enable the Debug Module during Domain1/CDomain SLEEP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain SLEEP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + + +/** + * @brief Enable the Debug Module during Domain1/CDomain STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Enable the Debug Module during Domain1/CDomain STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable the Debug Module during Domain1 SLEEP mode + * @retval None + */ +void HAL_EnableDomain2DBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Disable the Debug Module during Domain2 SLEEP mode + * @retval None + */ +void HAL_DisableDomain2DBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Enable the Debug Module during Domain2 STOP mode + * @retval None + */ +void HAL_EnableDomain2DBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Disable the Debug Module during Domain2 STOP mode + * @retval None + */ +void HAL_DisableDomain2DBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Enable the Debug Module during Domain2 STANDBY mode + * @retval None + */ +void HAL_EnableDomain2DBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} + +/** + * @brief Disable the Debug Module during Domain2 STANDBY mode + * @retval None + */ +void HAL_DisableDomain2DBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} +#endif /*DUAL_CORE*/ + +#if defined(DBGMCU_CR_DBG_STOPD3) +/** + * @brief Enable the Debug Module during Domain3/SRDomain STOP mode + * @retval None + */ +void HAL_EnableDomain3DBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} + +/** + * @brief Disable the Debug Module during Domain3/SRDomain STOP mode + * @retval None + */ +void HAL_DisableDomain3DBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} +#endif /*DBGMCU_CR_DBG_STOPD3*/ + +#if defined(DBGMCU_CR_DBG_STANDBYD3) +/** + * @brief Enable the Debug Module during Domain3/SRDomain STANDBY mode + * @retval None + */ +void HAL_EnableDomain3DBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} + +/** + * @brief Disable the Debug Module during Domain3/SRDomain STANDBY mode + * @retval None + */ +void HAL_DisableDomain3DBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} +#endif /*DBGMCU_CR_DBG_STANDBYD3*/ + +/** + * @brief Set the FMC Memory Mapping Swapping config. + * @param BankMapConfig: Defines the FMC Bank mapping configuration. This parameter can be + FMC_SWAPBMAP_DISABLE, FMC_SWAPBMAP_SDRAM_SRAM, FMC_SWAPBMAP_SDRAMB2 + * @retval HAL state + */ +void HAL_SetFMCMemorySwappingConfig(uint32_t BankMapConfig) +{ + /* Check the parameter */ + assert_param(IS_FMC_SWAPBMAP_MODE(BankMapConfig)); + MODIFY_REG(FMC_Bank1_R->BTCR[0], FMC_BCR1_BMAP, BankMapConfig); +} + +/** + * @brief Get FMC Bank mapping mode. + * @retval The FMC Bank mapping mode. This parameter can be + FMC_SWAPBMAP_DISABLE, FMC_SWAPBMAP_SDRAM_SRAM, FMC_SWAPBMAP_SDRAMB2 +*/ +uint32_t HAL_GetFMCMemorySwappingConfig(void) +{ + return READ_BIT(FMC_Bank1_R->BTCR[0], FMC_BCR1_BMAP); +} + +/** + * @brief Configure the EXTI input event line edge + * @note No edge configuration for direct lines but for configurable lines:(EXTI_LINE0..EXTI_LINE21), + * EXTI_LINE49,EXTI_LINE51,EXTI_LINE82,EXTI_LINE84,EXTI_LINE85 and EXTI_LINE86. + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Edge: Specifies EXTI line Edge used. + * This parameter can be one of the following values : + * @arg EXTI_RISING_EDGE : Configurable line, with Rising edge trigger detection + * @arg EXTI_FALLING_EDGE: Configurable line, with Falling edge trigger detection + * @retval None + */ +void HAL_EXTI_EdgeConfig(uint32_t EXTI_Line , uint32_t EXTI_Edge ) +{ + /* Check the parameter */ + assert_param(IS_HAL_EXTI_CONFIG_LINE(EXTI_Line)); + assert_param(IS_EXTI_EDGE_LINE(EXTI_Edge)); + + /* Clear Rising Falling edge configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->FTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI->RTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + + if( (EXTI_Edge & EXTI_RISING_EDGE) == EXTI_RISING_EDGE) + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI->RTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + if( (EXTI_Edge & EXTI_FALLING_EDGE) == EXTI_FALLING_EDGE) + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->FTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } +} + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0..EXTI_LINE21),EXTI_LINE49,EXTI_LINE51,EXTI_LINE82,EXTI_LINE84,EXTI_LINE85 and EXTI_LINE86. + * @retval None + */ +void HAL_EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_HAL_EXTI_CONFIG_LINE(EXTI_Line)); + + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->SWIER1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); +} + + +/** + * @brief Clears the EXTI's line pending flags for Domain D1 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @retval None + */ +void HAL_EXTI_D1_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_D1_LINE(EXTI_Line)); + WRITE_REG(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->PR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + +} + +#if defined(DUAL_CORE) +/** + * @brief Clears the EXTI's line pending flags for Domain D2 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @retval None + */ +void HAL_EXTI_D2_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_D2_LINE(EXTI_Line)); + WRITE_REG(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->PR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); +} + +#endif /*DUAL_CORE*/ +/** + * @brief Configure the EXTI input event line for Domain D1 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Mode: Specifies which EXTI line is used as interrupt or an event. + * This parameter can be one or a combination of the following values : + * @arg EXTI_MODE_IT : Interrupt Mode selected + * @arg EXTI_MODE_EVT : Event Mode selected + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + + * @retval None + */ +void HAL_EXTI_D1_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd ) +{ + /* Check the parameter */ + assert_param(IS_EXTI_D1_LINE(EXTI_Line)); + assert_param(IS_EXTI_MODE_LINE(EXTI_Mode)); + + if( (EXTI_Mode & EXTI_MODE_IT) == EXTI_MODE_IT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } + + if( (EXTI_Mode & EXTI_MODE_EVT) == EXTI_MODE_EVT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D1->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + else + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D1->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } +} + +#if defined(DUAL_CORE) +/** + * @brief Configure the EXTI input event line for Domain D2 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Mode: Specifies which EXTI line is used as interrupt or an event. + * This parameter can be one or a combination of the following values : + * @arg EXTI_MODE_IT : Interrupt Mode selected + * @arg EXTI_MODE_EVT : Event Mode selected + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + + * @retval None + */ +void HAL_EXTI_D2_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd ) +{ + /* Check the parameter */ + assert_param(IS_EXTI_D2_LINE(EXTI_Line)); + assert_param(IS_EXTI_MODE_LINE(EXTI_Mode)); + + if( (EXTI_Mode & EXTI_MODE_IT) == EXTI_MODE_IT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } + + if( (EXTI_Mode & EXTI_MODE_EVT) == EXTI_MODE_EVT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D2->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + else + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D2->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } +} +#endif /*DUAL_CORE*/ + +/** + * @brief Configure the EXTI input event line for Domain D3 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0...EXTI_LINE15),(EXTI_LINE19...EXTI_LINE21),EXTI_LINE25, EXTI_LINE34, + * EXTI_LINE35,EXTI_LINE41,(EXTI_LINE48...EXTI_LINE53) + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + * @param EXTI_ClearSrc: Specifies the clear source of D3 pending event. + * This parameter can be one of the following values : + * @arg BDMA_CH6_CLEAR : BDMA ch6 event selected as D3 domain pendclear source + * @arg BDMA_CH7_CLEAR : BDMA ch7 event selected as D3 domain pendclear source + * @arg LPTIM4_OUT_CLEAR : LPTIM4 out selected as D3 domain pendclear source + * @arg LPTIM5_OUT_CLEAR : LPTIM5 out selected as D3 domain pendclear source + * @retval None + */ +void HAL_EXTI_D3_EventInputConfig(uint32_t EXTI_Line, uint32_t EXTI_LineCmd , uint32_t EXTI_ClearSrc ) +{ + __IO uint32_t *pRegv; + + /* Check the parameter */ + assert_param(IS_EXTI_D3_LINE(EXTI_Line)); + assert_param(IS_EXTI_D3_CLEAR(EXTI_ClearSrc)); + + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->D3PMR1)) + ((EXTI_Line >> 5 ) * 0x20UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->D3PMR1)) +((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + + if(((EXTI_Line>>4)%2UL) == 0UL) + { + pRegv = (__IO uint32_t *) (((uint32_t) &(EXTI->D3PCR1L)) + ((EXTI_Line >> 5 ) * 0x20UL)); + } + else + { + pRegv = (__IO uint32_t *) (((uint32_t) &(EXTI->D3PCR1H)) + ((EXTI_Line >> 5 ) * 0x20UL)); + } + MODIFY_REG(*pRegv, (uint32_t)(3UL << ((EXTI_Line*2UL) & 0x1FUL)), (uint32_t)(EXTI_ClearSrc << ((EXTI_Line*2UL) & 0x1FUL))); + +} + + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c new file mode 100644 index 0000000..e272cfc --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c @@ -0,0 +1,558 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M exceptions are managed by CMSIS functions. + + (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() + function according to the following table. + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). + (#) please refer to programming manual for details in how to configure priority. + + -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. + The pending IRQ priority will be managed only by the sub priority. + + -@- IRQ priority order (sorted by highest to lowest priority): + (+@) Lowest preemption priority + (+@) Lowest sub priority + (+@) Lowest hardware priority (IRQ number) + + [..] + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x0F). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined + inside the stm32h7xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + + +/** + * @brief Sets the priority grouping field (preemption priority and subpriority) + * using the required unlock sequence. + * @param PriorityGroup The priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority + * 0 bits for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); +} + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t prioritygroup; + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); +} + +/** + * @brief Enables a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disables a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiates a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ +#if (__MPU_PRESENT == 1) +/** + * @brief Disables the MPU + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable fault exceptions */ + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0; +} + +/** + * @brief Enables the MPU + * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; + + /* Enable fault exceptions */ + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + +/** + * @brief Enables the MPU Region. + * @retval None + */ +void HAL_MPU_EnableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Enable the Region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Disables the MPU Region. + * @retval None + */ +void HAL_MPU_DisableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Initializes and configures the Region and the memory to be protected. + * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); + + /* Apply configuration */ + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); +} +#endif /* __MPU_PRESENT */ + +/** + * @brief Gets the priority grouping field from the NVIC Interrupt Controller. + * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) + */ +uint32_t HAL_NVIC_GetPriorityGrouping(void) +{ + /* Get the PRIGROUP[10:8] field value */ + return NVIC_GetPriorityGrouping(); +} + +/** + * @brief Gets the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @param PriorityGroup the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority + * 0 bits for subpriority + * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority Pointer on the Subpriority value (starting from 0). + * @retval None + */ +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + /* Get priority for Cortex-M system or device specific interrupts */ + NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); +} + +/** + * @brief Sets Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Gets Pending Interrupt (reads the pending register in the NVIC + * and returns the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval status - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clears the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval status - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if active else 0 */ + return NVIC_GetActive(IRQn); +} + +/** + * @brief Configures the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief This function handles SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if defined(DUAL_CORE) + +/** + * @brief Returns the current CPU ID. + * @retval CPU identifier + */ +uint32_t HAL_GetCurrentCPUID(void) +{ + if (((SCB->CPUID & 0x000000F0U) >> 4 )== 0x7U) + { + return CM7_CPUID; + } + else + { + return CM4_CPUID; + } +} + +#else + +/** +* @brief Returns the current CPU ID. +* @retval CPU identifier +*/ +uint32_t HAL_GetCurrentCPUID(void) +{ + return CM7_CPUID; +} + +#endif /*DUAL_CORE*/ +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dfsdm.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dfsdm.c new file mode 100644 index 0000000..46069d5 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dfsdm.c @@ -0,0 +1,3797 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dfsdm.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Digital Filter for Sigma-Delta Modulators + * (DFSDM) peripherals: + * + Initialization and configuration of channels and filters + * + Regular channels configuration + * + Injected channels configuration + * + Regular/Injected Channels DMA Configuration + * + Interrupts and flags management + * + Analog watchdog feature + * + Short-circuit detector feature + * + Extremes detector feature + * + Clock absence detector feature + * + Break generation on analog watchdog or short-circuit event + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** Channel initialization *** + ============================== + [..] + (#) User has first to initialize channels (before filters initialization). + (#) As prerequisite, fill in the HAL_DFSDM_ChannelMspInit() : + (++) Enable DFSDMz clock interface with __HAL_RCC_DFSDMz_CLK_ENABLE(). + (++) Enable the clocks for the DFSDMz GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). + (++) Configure these DFSDMz pins in alternate mode using HAL_GPIO_Init(). + (++) If interrupt mode is used, enable and configure DFSDMz_FLT0 global + interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + (#) Configure the output clock, input, serial interface, analog watchdog, + offset and data right bit shift parameters for this channel using the + HAL_DFSDM_ChannelInit() function. + + *** Channel clock absence detector *** + ====================================== + [..] + (#) Start clock absence detector using HAL_DFSDM_ChannelCkabStart() or + HAL_DFSDM_ChannelCkabStart_IT(). + (#) In polling mode, use HAL_DFSDM_ChannelPollForCkab() to detect the clock + absence. + (#) In interrupt mode, HAL_DFSDM_ChannelCkabCallback() will be called if + clock absence is detected. + (#) Stop clock absence detector using HAL_DFSDM_ChannelCkabStop() or + HAL_DFSDM_ChannelCkabStop_IT(). + (#) Please note that the same mode (polling or interrupt) has to be used + for all channels because the channels are sharing the same interrupt. + (#) Please note also that in interrupt mode, if clock absence detector is + stopped for one channel, interrupt will be disabled for all channels. + + *** Channel short circuit detector *** + ====================================== + [..] + (#) Start short circuit detector using HAL_DFSDM_ChannelScdStart() or + or HAL_DFSDM_ChannelScdStart_IT(). + (#) In polling mode, use HAL_DFSDM_ChannelPollForScd() to detect short + circuit. + (#) In interrupt mode, HAL_DFSDM_ChannelScdCallback() will be called if + short circuit is detected. + (#) Stop short circuit detector using HAL_DFSDM_ChannelScdStop() or + or HAL_DFSDM_ChannelScdStop_IT(). + (#) Please note that the same mode (polling or interrupt) has to be used + for all channels because the channels are sharing the same interrupt. + (#) Please note also that in interrupt mode, if short circuit detector is + stopped for one channel, interrupt will be disabled for all channels. + + *** Channel analog watchdog value *** + ===================================== + [..] + (#) Get analog watchdog filter value of a channel using + HAL_DFSDM_ChannelGetAwdValue(). + + *** Channel offset value *** + ===================================== + [..] + (#) Modify offset value of a channel using HAL_DFSDM_ChannelModifyOffset(). + + *** Filter initialization *** + ============================= + [..] + (#) After channel initialization, user has to init filters. + (#) As prerequisite, fill in the HAL_DFSDM_FilterMspInit() : + (++) If interrupt mode is used , enable and configure DFSDMz_FLTx global + interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + Please note that DFSDMz_FLT0 global interrupt could be already + enabled if interrupt is used for channel. + (++) If DMA mode is used, configure DMA with HAL_DMA_Init() and link it + with DFSDMz filter handle using __HAL_LINKDMA(). + (#) Configure the regular conversion, injected conversion and filter + parameters for this filter using the HAL_DFSDM_FilterInit() function. + + *** Filter regular channel conversion *** + ========================================= + [..] + (#) Select regular channel and enable/disable continuous mode using + HAL_DFSDM_FilterConfigRegChannel(). + (#) Start regular conversion using HAL_DFSDM_FilterRegularStart(), + HAL_DFSDM_FilterRegularStart_IT(), HAL_DFSDM_FilterRegularStart_DMA() or + HAL_DFSDM_FilterRegularMsbStart_DMA(). + (#) In polling mode, use HAL_DFSDM_FilterPollForRegConversion() to detect + the end of regular conversion. + (#) In interrupt mode, HAL_DFSDM_FilterRegConvCpltCallback() will be called + at the end of regular conversion. + (#) Get value of regular conversion and corresponding channel using + HAL_DFSDM_FilterGetRegularValue(). + (#) In DMA mode, HAL_DFSDM_FilterRegConvHalfCpltCallback() and + HAL_DFSDM_FilterRegConvCpltCallback() will be called respectively at the + half transfer and at the transfer complete. Please note that + HAL_DFSDM_FilterRegConvHalfCpltCallback() will be called only in DMA + circular mode. + (#) Stop regular conversion using HAL_DFSDM_FilterRegularStop(), + HAL_DFSDM_FilterRegularStop_IT() or HAL_DFSDM_FilterRegularStop_DMA(). + + *** Filter injected channels conversion *** + =========================================== + [..] + (#) Select injected channels using HAL_DFSDM_FilterConfigInjChannel(). + (#) Start injected conversion using HAL_DFSDM_FilterInjectedStart(), + HAL_DFSDM_FilterInjectedStart_IT(), HAL_DFSDM_FilterInjectedStart_DMA() or + HAL_DFSDM_FilterInjectedMsbStart_DMA(). + (#) In polling mode, use HAL_DFSDM_FilterPollForInjConversion() to detect + the end of injected conversion. + (#) In interrupt mode, HAL_DFSDM_FilterInjConvCpltCallback() will be called + at the end of injected conversion. + (#) Get value of injected conversion and corresponding channel using + HAL_DFSDM_FilterGetInjectedValue(). + (#) In DMA mode, HAL_DFSDM_FilterInjConvHalfCpltCallback() and + HAL_DFSDM_FilterInjConvCpltCallback() will be called respectively at the + half transfer and at the transfer complete. Please note that + HAL_DFSDM_FilterInjConvCpltCallback() will be called only in DMA + circular mode. + (#) Stop injected conversion using HAL_DFSDM_FilterInjectedStop(), + HAL_DFSDM_FilterInjectedStop_IT() or HAL_DFSDM_FilterInjectedStop_DMA(). + + *** Filter analog watchdog *** + ============================== + [..] + (#) Start filter analog watchdog using HAL_DFSDM_FilterAwdStart_IT(). + (#) HAL_DFSDM_FilterAwdCallback() will be called if analog watchdog occurs. + (#) Stop filter analog watchdog using HAL_DFSDM_FilterAwdStop_IT(). + + *** Filter extreme detector *** + =============================== + [..] + (#) Start filter extreme detector using HAL_DFSDM_FilterExdStart(). + (#) Get extreme detector maximum value using HAL_DFSDM_FilterGetExdMaxValue(). + (#) Get extreme detector minimum value using HAL_DFSDM_FilterGetExdMinValue(). + (#) Start filter extreme detector using HAL_DFSDM_FilterExdStop(). + + *** Filter conversion time *** + ============================== + [..] + (#) Get conversion time value using HAL_DFSDM_FilterGetConvTimeValue(). + + *** Callback registration *** + ============================= + [..] + The compilation define USE_HAL_DFSDM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use functions HAL_DFSDM_Channel_RegisterCallback(), + HAL_DFSDM_Filter_RegisterCallback() or + HAL_DFSDM_Filter_RegisterAwdCallback() to register a user callback. + + [..] + Function HAL_DFSDM_Channel_RegisterCallback() allows to register + following callbacks: + (+) CkabCallback : DFSDM channel clock absence detection callback. + (+) ScdCallback : DFSDM channel short circuit detection callback. + (+) MspInitCallback : DFSDM channel MSP init callback. + (+) MspDeInitCallback : DFSDM channel MSP de-init callback. + [..] + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Function HAL_DFSDM_Filter_RegisterCallback() allows to register + following callbacks: + (+) RegConvCpltCallback : DFSDM filter regular conversion complete callback. + (+) RegConvHalfCpltCallback : DFSDM filter half regular conversion complete callback. + (+) InjConvCpltCallback : DFSDM filter injected conversion complete callback. + (+) InjConvHalfCpltCallback : DFSDM filter half injected conversion complete callback. + (+) ErrorCallback : DFSDM filter error callback. + (+) MspInitCallback : DFSDM filter MSP init callback. + (+) MspDeInitCallback : DFSDM filter MSP de-init callback. + [..] + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + For specific DFSDM filter analog watchdog callback use dedicated register callback: + HAL_DFSDM_Filter_RegisterAwdCallback(). + + [..] + Use functions HAL_DFSDM_Channel_UnRegisterCallback() or + HAL_DFSDM_Filter_UnRegisterCallback() to reset a callback to the default + weak function. + + [..] + HAL_DFSDM_Channel_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + [..] + This function allows to reset following callbacks: + (+) CkabCallback : DFSDM channel clock absence detection callback. + (+) ScdCallback : DFSDM channel short circuit detection callback. + (+) MspInitCallback : DFSDM channel MSP init callback. + (+) MspDeInitCallback : DFSDM channel MSP de-init callback. + + [..] + HAL_DFSDM_Filter_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + [..] + This function allows to reset following callbacks: + (+) RegConvCpltCallback : DFSDM filter regular conversion complete callback. + (+) RegConvHalfCpltCallback : DFSDM filter half regular conversion complete callback. + (+) InjConvCpltCallback : DFSDM filter injected conversion complete callback. + (+) InjConvHalfCpltCallback : DFSDM filter half injected conversion complete callback. + (+) ErrorCallback : DFSDM filter error callback. + (+) MspInitCallback : DFSDM filter MSP init callback. + (+) MspDeInitCallback : DFSDM filter MSP de-init callback. + + [..] + For specific DFSDM filter analog watchdog callback use dedicated unregister callback: + HAL_DFSDM_Filter_UnRegisterAwdCallback(). + + [..] + By default, after the call of init function and if the state is RESET + all callbacks are reset to the corresponding legacy weak functions: + examples HAL_DFSDM_ChannelScdCallback(), HAL_DFSDM_FilterErrorCallback(). + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak functions in the init and de-init only when these + callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the init and de-init keep and use + the user MspInit/MspDeInit callbacks (registered beforehand) + + [..] + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the init/de-init. + In that case first register the MspInit/MspDeInit user callbacks using + HAL_DFSDM_Channel_RegisterCallback() or + HAL_DFSDM_Filter_RegisterCallback() before calling init or de-init function. + + [..] + When The compilation define USE_HAL_DFSDM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ +#ifdef HAL_DFSDM_MODULE_ENABLED + +/** @defgroup DFSDM DFSDM + * @brief DFSDM HAL driver module + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup DFSDM_Private_Define DFSDM Private Define + * @{ + */ +#define DFSDM_FLTCR1_MSB_RCH_OFFSET 8 +#define DFSDM_MSB_MASK 0xFFFF0000U +#define DFSDM_LSB_MASK 0x0000FFFFU +#define DFSDM_CKAB_TIMEOUT 5000U +#define DFSDM1_CHANNEL_NUMBER 8U +#if defined(DFSDM2_Channel0) +#define DFSDM2_CHANNEL_NUMBER 2U +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DFSDM_Private_Variables DFSDM Private Variables + * @{ + */ +static __IO uint32_t v_dfsdm1ChannelCounter = 0; +static DFSDM_Channel_HandleTypeDef *a_dfsdm1ChannelHandle[DFSDM1_CHANNEL_NUMBER] = {NULL}; +#if defined(DFSDM2_Channel0) +static __IO uint32_t v_dfsdm2ChannelCounter = 0; +static DFSDM_Channel_HandleTypeDef *a_dfsdm2ChannelHandle[DFSDM2_CHANNEL_NUMBER] = {NULL}; +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DFSDM_Private_Functions DFSDM Private Functions + * @{ + */ +static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels); +static uint32_t DFSDM_GetChannelFromInstance(const DFSDM_Channel_TypeDef *Instance); +static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); +static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma); +static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma); +static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma); +static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma); +static void DFSDM_DMAError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DFSDM_Exported_Functions DFSDM Exported Functions + * @{ + */ + +/** @defgroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions + * @brief Channel initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Channel initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the DFSDM channel. + (+) De-initialize the DFSDM channel. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DFSDM channel according to the specified parameters + * in the DFSDM_ChannelInitTypeDef structure and initialize the associated handle. + * @param hdfsdm_channel DFSDM channel handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + __IO uint32_t *channelCounterPtr; + DFSDM_Channel_HandleTypeDef **channelHandleTable; + DFSDM_Channel_TypeDef *channel0Instance; + + /* Check DFSDM Channel handle */ + if(hdfsdm_channel == NULL) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + assert_param(IS_FUNCTIONAL_STATE(hdfsdm_channel->Init.OutputClock.Activation)); + assert_param(IS_DFSDM_CHANNEL_INPUT(hdfsdm_channel->Init.Input.Multiplexer)); + assert_param(IS_DFSDM_CHANNEL_DATA_PACKING(hdfsdm_channel->Init.Input.DataPacking)); + assert_param(IS_DFSDM_CHANNEL_INPUT_PINS(hdfsdm_channel->Init.Input.Pins)); + assert_param(IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(hdfsdm_channel->Init.SerialInterface.Type)); + assert_param(IS_DFSDM_CHANNEL_SPI_CLOCK(hdfsdm_channel->Init.SerialInterface.SpiClock)); + assert_param(IS_DFSDM_CHANNEL_FILTER_ORDER(hdfsdm_channel->Init.Awd.FilterOrder)); + assert_param(IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(hdfsdm_channel->Init.Awd.Oversampling)); + assert_param(IS_DFSDM_CHANNEL_OFFSET(hdfsdm_channel->Init.Offset)); + assert_param(IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(hdfsdm_channel->Init.RightBitShift)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + channelCounterPtr = &v_dfsdm1ChannelCounter; + channelHandleTable = a_dfsdm1ChannelHandle; + channel0Instance = DFSDM1_Channel0; + } + else + { + channelCounterPtr = &v_dfsdm2ChannelCounter; + channelHandleTable = a_dfsdm2ChannelHandle; + channel0Instance = DFSDM2_Channel0; + } +#else /* DFSDM2_Channel0 */ + channelCounterPtr = &v_dfsdm1ChannelCounter; + channelHandleTable = a_dfsdm1ChannelHandle; + channel0Instance = DFSDM1_Channel0; +#endif /* DFSDM2_Channel0 */ + + /* Check that channel has not been already initialized */ + if (channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] != NULL) + { + return HAL_ERROR; + } + +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + /* Reset callback pointers to the weak predefined callbacks */ + hdfsdm_channel->CkabCallback = HAL_DFSDM_ChannelCkabCallback; + hdfsdm_channel->ScdCallback = HAL_DFSDM_ChannelScdCallback; + + /* Call MSP init function */ + if(hdfsdm_channel->MspInitCallback == NULL) + { + hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; + } + hdfsdm_channel->MspInitCallback(hdfsdm_channel); +#else + /* Call MSP init function */ + HAL_DFSDM_ChannelMspInit(hdfsdm_channel); +#endif + + /* Update the channel counter */ + (*channelCounterPtr)++; + + /* Configure output serial clock and enable global DFSDM interface only for first channel */ + if(*channelCounterPtr == 1U) + { + assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK(hdfsdm_channel->Init.OutputClock.Selection)); + /* Set the output serial clock source */ + channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTSRC); + channel0Instance->CHCFGR1 |= hdfsdm_channel->Init.OutputClock.Selection; + + /* Reset clock divider */ + channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTDIV); + if(hdfsdm_channel->Init.OutputClock.Activation == ENABLE) + { + assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(hdfsdm_channel->Init.OutputClock.Divider)); + /* Set the output clock divider */ + channel0Instance->CHCFGR1 |= (uint32_t)((hdfsdm_channel->Init.OutputClock.Divider - 1U) << + DFSDM_CHCFGR1_CKOUTDIV_Pos); + } + + /* enable the DFSDM global interface */ + channel0Instance->CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN; + } + + /* Set channel input parameters */ + hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DATPACK | DFSDM_CHCFGR1_DATMPX | + DFSDM_CHCFGR1_CHINSEL); + hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.Input.Multiplexer | + hdfsdm_channel->Init.Input.DataPacking | + hdfsdm_channel->Init.Input.Pins); + + /* Set serial interface parameters */ + hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SITP | DFSDM_CHCFGR1_SPICKSEL); + hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.SerialInterface.Type | + hdfsdm_channel->Init.SerialInterface.SpiClock); + + /* Set analog watchdog parameters */ + hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_AWFORD | DFSDM_CHAWSCDR_AWFOSR); + hdfsdm_channel->Instance->CHAWSCDR |= (hdfsdm_channel->Init.Awd.FilterOrder | + ((hdfsdm_channel->Init.Awd.Oversampling - 1U) << DFSDM_CHAWSCDR_AWFOSR_Pos)); + + /* Set channel offset and right bit shift */ + hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET | DFSDM_CHCFGR2_DTRBS); + hdfsdm_channel->Instance->CHCFGR2 |= (((uint32_t) hdfsdm_channel->Init.Offset << DFSDM_CHCFGR2_OFFSET_Pos) | + (hdfsdm_channel->Init.RightBitShift << DFSDM_CHCFGR2_DTRBS_Pos)); + + /* Enable DFSDM channel */ + hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CHEN; + + /* Set DFSDM Channel to ready state */ + hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_READY; + + /* Store channel handle in DFSDM channel handle table */ + channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = hdfsdm_channel; + + return HAL_OK; +} + +/** + * @brief De-initialize the DFSDM channel. + * @param hdfsdm_channel DFSDM channel handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + __IO uint32_t *channelCounterPtr; + DFSDM_Channel_HandleTypeDef **channelHandleTable; + DFSDM_Channel_TypeDef *channel0Instance; + + /* Check DFSDM Channel handle */ + if(hdfsdm_channel == NULL) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + channelCounterPtr = &v_dfsdm1ChannelCounter; + channelHandleTable = a_dfsdm1ChannelHandle; + channel0Instance = DFSDM1_Channel0; + } + else + { + channelCounterPtr = &v_dfsdm2ChannelCounter; + channelHandleTable = a_dfsdm2ChannelHandle; + channel0Instance = DFSDM2_Channel0; + } +#else /* DFSDM2_Channel0 */ + channelCounterPtr = &v_dfsdm1ChannelCounter; + channelHandleTable = a_dfsdm1ChannelHandle; + channel0Instance = DFSDM1_Channel0; +#endif /* DFSDM2_Channel0 */ + + /* Check that channel has not been already deinitialized */ + if (channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] == NULL) + { + return HAL_ERROR; + } + + /* Disable the DFSDM channel */ + hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CHEN); + + /* Update the channel counter */ + (*channelCounterPtr)--; + + /* Disable global DFSDM at deinit of last channel */ + if (*channelCounterPtr == 0U) + { + channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN); + } + + /* Call MSP deinit function */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + if(hdfsdm_channel->MspDeInitCallback == NULL) + { + hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; + } + hdfsdm_channel->MspDeInitCallback(hdfsdm_channel); +#else + HAL_DFSDM_ChannelMspDeInit(hdfsdm_channel); +#endif + + /* Set DFSDM Channel in reset state */ + hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_RESET; + + /* Reset channel handle in DFSDM channel handle table */ + channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = (DFSDM_Channel_HandleTypeDef *) NULL; + + return HAL_OK; +} + +/** + * @brief Initialize the DFSDM channel MSP. + * @param hdfsdm_channel DFSDM channel handle. + * @retval None + */ +__weak void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_channel); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_DFSDM_ChannelMspInit could be implemented in the user file. + */ +} + +/** + * @brief De-initialize the DFSDM channel MSP. + * @param hdfsdm_channel DFSDM channel handle. + * @retval None + */ +__weak void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_channel); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_DFSDM_ChannelMspDeInit could be implemented in the user file. + */ +} + +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a user DFSDM channel callback + * to be used instead of the weak predefined callback. + * @param hdfsdm_channel DFSDM channel handle. + * @param CallbackID ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_DFSDM_CHANNEL_CKAB_CB_ID clock absence detection callback ID. + * @arg @ref HAL_DFSDM_CHANNEL_SCD_CB_ID short circuit detection callback ID. + * @arg @ref HAL_DFSDM_CHANNEL_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID MSP de-init callback ID. + * @param pCallback pointer to the callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_Channel_RegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID, + pDFSDM_Channel_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(pCallback == NULL) + { + /* update return status */ + status = HAL_ERROR; + } + else + { + if(HAL_DFSDM_CHANNEL_STATE_READY == hdfsdm_channel->State) + { + switch (CallbackID) + { + case HAL_DFSDM_CHANNEL_CKAB_CB_ID : + hdfsdm_channel->CkabCallback = pCallback; + break; + case HAL_DFSDM_CHANNEL_SCD_CB_ID : + hdfsdm_channel->ScdCallback = pCallback; + break; + case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : + hdfsdm_channel->MspInitCallback = pCallback; + break; + case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : + hdfsdm_channel->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if(HAL_DFSDM_CHANNEL_STATE_RESET == hdfsdm_channel->State) + { + switch (CallbackID) + { + case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : + hdfsdm_channel->MspInitCallback = pCallback; + break; + case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : + hdfsdm_channel->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Unregister a user DFSDM channel callback. + * DFSDM channel callback is redirected to the weak predefined callback. + * @param hdfsdm_channel DFSDM channel handle. + * @param CallbackID ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_DFSDM_CHANNEL_CKAB_CB_ID clock absence detection callback ID. + * @arg @ref HAL_DFSDM_CHANNEL_SCD_CB_ID short circuit detection callback ID. + * @arg @ref HAL_DFSDM_CHANNEL_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID MSP de-init callback ID. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_Channel_UnRegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(HAL_DFSDM_CHANNEL_STATE_READY == hdfsdm_channel->State) + { + switch (CallbackID) + { + case HAL_DFSDM_CHANNEL_CKAB_CB_ID : + hdfsdm_channel->CkabCallback = HAL_DFSDM_ChannelCkabCallback; + break; + case HAL_DFSDM_CHANNEL_SCD_CB_ID : + hdfsdm_channel->ScdCallback = HAL_DFSDM_ChannelScdCallback; + break; + case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : + hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; + break; + case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : + hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if(HAL_DFSDM_CHANNEL_STATE_RESET == hdfsdm_channel->State) + { + switch (CallbackID) + { + case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : + hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; + break; + case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : + hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + return status; +} +#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions + * @brief Channel operation functions + * +@verbatim + ============================================================================== + ##### Channel operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Manage clock absence detector feature. + (+) Manage short circuit detector feature. + (+) Get analog watchdog value. + (+) Modify offset value. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to start clock absence detection in polling mode. + * @note Same mode has to be used for all channels. + * @note If clock is not available on this channel during 5 seconds, + * clock absence detection will not be activated and function + * will return HAL_TIMEOUT error. + * @param hdfsdm_channel DFSDM channel handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t channel; + uint32_t tickstart; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Get channel number from channel instance */ + channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Clear clock absence flag */ + while ((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U) + { + filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); + + /* Check the Timeout */ + if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT) + { + /* Set timeout status */ + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + /* Start clock absence detection */ + hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN; + } + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to poll for the clock absence detection. + * @param hdfsdm_channel DFSDM channel handle. + * @param Timeout Timeout value in milliseconds. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(const DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t channel; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + return HAL_ERROR; + } + else + { + /* Get channel number from channel instance */ + channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait clock absence detection */ + while ((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) == 0U) + { + /* Check the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick()-tickstart) > Timeout) || (Timeout == 0U)) + { + /* Return timeout status */ + return HAL_TIMEOUT; + } + } + } + + /* Clear clock absence detection flag */ + filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); + + /* Return function status */ + return HAL_OK; + } +} + +/** + * @brief This function allows to stop clock absence detection in polling mode. + * @param hdfsdm_channel DFSDM channel handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t channel; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Stop clock absence detection */ + hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN); + + /* Clear clock absence flag */ + channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); + filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start clock absence detection in interrupt mode. + * @note Same mode has to be used for all channels. + * @note If clock is not available on this channel during 5 seconds, + * clock absence detection will not be activated and function + * will return HAL_TIMEOUT error. + * @param hdfsdm_channel DFSDM channel handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t channel; + uint32_t tickstart; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Get channel number from channel instance */ + channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Clear clock absence flag */ + while ((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U) + { + filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); + + /* Check the Timeout */ + if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT) + { + /* Set timeout status */ + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + /* Activate clock absence detection interrupt */ + filter0Instance->FLTCR2 |= DFSDM_FLTCR2_CKABIE; + + /* Start clock absence detection */ + hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN; + } + } + /* Return function status */ + return status; +} + +/** + * @brief Clock absence detection callback. + * @param hdfsdm_channel DFSDM channel handle. + * @retval None + */ +__weak void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_channel); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DFSDM_ChannelCkabCallback could be implemented in the user file + */ +} + +/** + * @brief This function allows to stop clock absence detection in interrupt mode. + * @note Interrupt will be disabled for all channels + * @param hdfsdm_channel DFSDM channel handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t channel; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Stop clock absence detection */ + hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN); + + /* Clear clock absence flag */ + channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); + filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); + + /* Disable clock absence detection interrupt */ + filter0Instance->FLTCR2 &= ~(DFSDM_FLTCR2_CKABIE); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start short circuit detection in polling mode. + * @note Same mode has to be used for all channels + * @param hdfsdm_channel DFSDM channel handle. + * @param Threshold Short circuit detector threshold. + * This parameter must be a number between Min_Data = 0 and Max_Data = 255. + * @param BreakSignal Break signals assigned to short circuit event. + * This parameter can be a values combination of @ref DFSDM_BreakSignals. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + uint32_t Threshold, + uint32_t BreakSignal) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold)); + assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal)); + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Configure threshold and break signals */ + hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT); + hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_Pos) | \ + Threshold); + + /* Start short circuit detection */ + hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to poll for the short circuit detection. + * @param hdfsdm_channel DFSDM channel handle. + * @param Timeout Timeout value in milliseconds. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(const DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t channel; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + return HAL_ERROR; + } + else + { + /* Get channel number from channel instance */ + channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait short circuit detection */ + while (((filter0Instance->FLTISR & DFSDM_FLTISR_SCDF) >> (DFSDM_FLTISR_SCDF_Pos + channel)) == 0U) + { + /* Check the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick()-tickstart) > Timeout) || (Timeout == 0U)) + { + /* Return timeout status */ + return HAL_TIMEOUT; + } + } + } + + /* Clear short circuit detection flag */ + filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); + + /* Return function status */ + return HAL_OK; + } +} + +/** + * @brief This function allows to stop short circuit detection in polling mode. + * @param hdfsdm_channel DFSDM channel handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t channel; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Stop short circuit detection */ + hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN); + + /* Clear short circuit detection flag */ + channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); + filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start short circuit detection in interrupt mode. + * @note Same mode has to be used for all channels + * @param hdfsdm_channel DFSDM channel handle. + * @param Threshold Short circuit detector threshold. + * This parameter must be a number between Min_Data = 0 and Max_Data = 255. + * @param BreakSignal Break signals assigned to short circuit event. + * This parameter can be a values combination of @ref DFSDM_BreakSignals. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + uint32_t Threshold, + uint32_t BreakSignal) +{ + HAL_StatusTypeDef status = HAL_OK; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold)); + assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Activate short circuit detection interrupt */ + filter0Instance->FLTCR2 |= DFSDM_FLTCR2_SCDIE; + + /* Configure threshold and break signals */ + hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT); + hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_Pos) | \ + Threshold); + + /* Start short circuit detection */ + hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN; + } + /* Return function status */ + return status; +} + +/** + * @brief Short circuit detection callback. + * @param hdfsdm_channel DFSDM channel handle. + * @retval None + */ +__weak void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_channel); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DFSDM_ChannelScdCallback could be implemented in the user file + */ +} + +/** + * @brief This function allows to stop short circuit detection in interrupt mode. + * @note Interrupt will be disabled for all channels + * @param hdfsdm_channel DFSDM channel handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t channel; + DFSDM_Filter_TypeDef *filter0Instance; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Stop short circuit detection */ + hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN); + + /* Clear short circuit detection flag */ + channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); + filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); + + /* Disable short circuit detection interrupt */ + filter0Instance->FLTCR2 &= ~(DFSDM_FLTCR2_SCDIE); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to get channel analog watchdog value. + * @param hdfsdm_channel DFSDM channel handle. + * @retval Channel analog watchdog value. + */ +int16_t HAL_DFSDM_ChannelGetAwdValue(const DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + return (int16_t) hdfsdm_channel->Instance->CHWDATAR; +} + +/** + * @brief This function allows to modify channel offset value. + * @param hdfsdm_channel DFSDM channel handle. + * @param Offset DFSDM channel offset. + * This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, + int32_t Offset) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); + assert_param(IS_DFSDM_CHANNEL_OFFSET(Offset)); + + /* Check DFSDM channel state */ + if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Modify channel offset */ + hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET); + hdfsdm_channel->Instance->CHCFGR2 |= ((uint32_t) Offset << DFSDM_CHCFGR2_OFFSET_Pos); + } + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function + * @brief Channel state function + * +@verbatim + ============================================================================== + ##### Channel state function ##### + ============================================================================== + [..] This section provides function allowing to: + (+) Get channel handle state. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to get the current DFSDM channel handle state. + * @param hdfsdm_channel DFSDM channel handle. + * @retval DFSDM channel state. + */ +HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(const DFSDM_Channel_HandleTypeDef *hdfsdm_channel) +{ + /* Return DFSDM channel handle state */ + return hdfsdm_channel->State; +} + +/** + * @} + */ + +/** @defgroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions + * @brief Filter initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Filter initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the DFSDM filter. + (+) De-initialize the DFSDM filter. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DFSDM filter according to the specified parameters + * in the DFSDM_FilterInitTypeDef structure and initialize the associated handle. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + const DFSDM_Filter_TypeDef *filter0Instance; + + /* Check DFSDM Channel handle */ + if(hdfsdm_filter == NULL) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(IS_DFSDM_FILTER_REG_TRIGGER(hdfsdm_filter->Init.RegularParam.Trigger)); + assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.FastMode)); + assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.DmaMode)); + assert_param(IS_DFSDM_FILTER_INJ_TRIGGER(hdfsdm_filter->Init.InjectedParam.Trigger)); + assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.ScanMode)); + assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.DmaMode)); + assert_param(IS_DFSDM_FILTER_SINC_ORDER(hdfsdm_filter->Init.FilterParam.SincOrder)); + assert_param(IS_DFSDM_FILTER_OVS_RATIO(hdfsdm_filter->Init.FilterParam.Oversampling)); + assert_param(IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(hdfsdm_filter->Init.FilterParam.IntOversampling)); + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_FILTER_INSTANCE(hdfsdm_filter->Instance)) + { + filter0Instance = DFSDM1_Filter0; + } + else + { + filter0Instance = DFSDM2_Filter0; + } +#else /* DFSDM2_Channel0 */ + filter0Instance = DFSDM1_Filter0; +#endif /* DFSDM2_Channel0 */ + + /* Check parameters compatibility */ + if ((hdfsdm_filter->Instance == filter0Instance) && + ((hdfsdm_filter->Init.RegularParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER) || + (hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER))) + { + return HAL_ERROR; + } + + /* Initialize DFSDM filter variables with default values */ + hdfsdm_filter->RegularContMode = DFSDM_CONTINUOUS_CONV_OFF; + hdfsdm_filter->InjectedChannelsNbr = 1; + hdfsdm_filter->InjConvRemaining = 1; + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_NONE; + +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + /* Reset callback pointers to the weak predefined callbacks */ + hdfsdm_filter->AwdCallback = HAL_DFSDM_FilterAwdCallback; + hdfsdm_filter->RegConvCpltCallback = HAL_DFSDM_FilterRegConvCpltCallback; + hdfsdm_filter->RegConvHalfCpltCallback = HAL_DFSDM_FilterRegConvHalfCpltCallback; + hdfsdm_filter->InjConvCpltCallback = HAL_DFSDM_FilterInjConvCpltCallback; + hdfsdm_filter->InjConvHalfCpltCallback = HAL_DFSDM_FilterInjConvHalfCpltCallback; + hdfsdm_filter->ErrorCallback = HAL_DFSDM_FilterErrorCallback; + + /* Call MSP init function */ + if(hdfsdm_filter->MspInitCallback == NULL) + { + hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; + } + hdfsdm_filter->MspInitCallback(hdfsdm_filter); +#else + /* Call MSP init function */ + HAL_DFSDM_FilterMspInit(hdfsdm_filter); +#endif + + /* Set regular parameters */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC); + if(hdfsdm_filter->Init.RegularParam.FastMode == ENABLE) + { + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_FAST; + } + else + { + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_FAST); + } + + if(hdfsdm_filter->Init.RegularParam.DmaMode == ENABLE) + { + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RDMAEN; + } + else + { + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RDMAEN); + } + + /* Set injected parameters */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC | DFSDM_FLTCR1_JEXTEN | DFSDM_FLTCR1_JEXTSEL); + if(hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_EXT_TRIGGER) + { + assert_param(IS_DFSDM_FILTER_EXT_TRIG(hdfsdm_filter->Init.InjectedParam.ExtTrigger)); + assert_param(IS_DFSDM_FILTER_EXT_TRIG_EDGE(hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge)); + hdfsdm_filter->Instance->FLTCR1 |= (hdfsdm_filter->Init.InjectedParam.ExtTrigger); + } + + if(hdfsdm_filter->Init.InjectedParam.ScanMode == ENABLE) + { + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSCAN; + } + else + { + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSCAN); + } + + if(hdfsdm_filter->Init.InjectedParam.DmaMode == ENABLE) + { + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JDMAEN; + } + else + { + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JDMAEN); + } + + /* Set filter parameters */ + hdfsdm_filter->Instance->FLTFCR &= ~(DFSDM_FLTFCR_FORD | DFSDM_FLTFCR_FOSR | DFSDM_FLTFCR_IOSR); + hdfsdm_filter->Instance->FLTFCR |= (hdfsdm_filter->Init.FilterParam.SincOrder | + ((hdfsdm_filter->Init.FilterParam.Oversampling - 1U) << DFSDM_FLTFCR_FOSR_Pos) | + (hdfsdm_filter->Init.FilterParam.IntOversampling - 1U)); + + /* Store regular and injected triggers and injected scan mode*/ + hdfsdm_filter->RegularTrigger = hdfsdm_filter->Init.RegularParam.Trigger; + hdfsdm_filter->InjectedTrigger = hdfsdm_filter->Init.InjectedParam.Trigger; + hdfsdm_filter->ExtTriggerEdge = hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge; + hdfsdm_filter->InjectedScanMode = hdfsdm_filter->Init.InjectedParam.ScanMode; + + /* Enable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; + + /* Set DFSDM filter to ready state */ + hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-initializes the DFSDM filter. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Check DFSDM filter handle */ + if(hdfsdm_filter == NULL) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Disable the DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); + + /* Call MSP deinit function */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + if(hdfsdm_filter->MspDeInitCallback == NULL) + { + hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; + } + hdfsdm_filter->MspDeInitCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterMspDeInit(hdfsdm_filter); +#endif + + /* Set DFSDM filter in reset state */ + hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the DFSDM filter MSP. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +__weak void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_filter); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_DFSDM_FilterMspInit could be implemented in the user file. + */ +} + +/** + * @brief De-initializes the DFSDM filter MSP. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +__weak void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_filter); + + /* NOTE : This function should not be modified, when the function is needed, + the HAL_DFSDM_FilterMspDeInit could be implemented in the user file. + */ +} + +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a user DFSDM filter callback + * to be used instead of the weak predefined callback. + * @param hdfsdm_filter DFSDM filter handle. + * @param CallbackID ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID regular conversion complete callback ID. + * @arg @ref HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID half regular conversion complete callback ID. + * @arg @ref HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID injected conversion complete callback ID. + * @arg @ref HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID half injected conversion complete callback ID. + * @arg @ref HAL_DFSDM_FILTER_ERROR_CB_ID error callback ID. + * @arg @ref HAL_DFSDM_FILTER_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_DFSDM_FILTER_MSPDEINIT_CB_ID MSP de-init callback ID. + * @param pCallback pointer to the callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID, + pDFSDM_Filter_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(pCallback == NULL) + { + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + else + { + if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) + { + switch (CallbackID) + { + case HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID : + hdfsdm_filter->RegConvCpltCallback = pCallback; + break; + case HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID : + hdfsdm_filter->RegConvHalfCpltCallback = pCallback; + break; + case HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID : + hdfsdm_filter->InjConvCpltCallback = pCallback; + break; + case HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID : + hdfsdm_filter->InjConvHalfCpltCallback = pCallback; + break; + case HAL_DFSDM_FILTER_ERROR_CB_ID : + hdfsdm_filter->ErrorCallback = pCallback; + break; + case HAL_DFSDM_FILTER_MSPINIT_CB_ID : + hdfsdm_filter->MspInitCallback = pCallback; + break; + case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : + hdfsdm_filter->MspDeInitCallback = pCallback; + break; + default : + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if(HAL_DFSDM_FILTER_STATE_RESET == hdfsdm_filter->State) + { + switch (CallbackID) + { + case HAL_DFSDM_FILTER_MSPINIT_CB_ID : + hdfsdm_filter->MspInitCallback = pCallback; + break; + case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : + hdfsdm_filter->MspDeInitCallback = pCallback; + break; + default : + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Unregister a user DFSDM filter callback. + * DFSDM filter callback is redirected to the weak predefined callback. + * @param hdfsdm_filter DFSDM filter handle. + * @param CallbackID ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID regular conversion complete callback ID. + * @arg @ref HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID half regular conversion complete callback ID. + * @arg @ref HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID injected conversion complete callback ID. + * @arg @ref HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID half injected conversion complete callback ID. + * @arg @ref HAL_DFSDM_FILTER_ERROR_CB_ID error callback ID. + * @arg @ref HAL_DFSDM_FILTER_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_DFSDM_FILTER_MSPDEINIT_CB_ID MSP de-init callback ID. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) + { + switch (CallbackID) + { + case HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID : + hdfsdm_filter->RegConvCpltCallback = HAL_DFSDM_FilterRegConvCpltCallback; + break; + case HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID : + hdfsdm_filter->RegConvHalfCpltCallback = HAL_DFSDM_FilterRegConvHalfCpltCallback; + break; + case HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID : + hdfsdm_filter->InjConvCpltCallback = HAL_DFSDM_FilterInjConvCpltCallback; + break; + case HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID : + hdfsdm_filter->InjConvHalfCpltCallback = HAL_DFSDM_FilterInjConvHalfCpltCallback; + break; + case HAL_DFSDM_FILTER_ERROR_CB_ID : + hdfsdm_filter->ErrorCallback = HAL_DFSDM_FilterErrorCallback; + break; + case HAL_DFSDM_FILTER_MSPINIT_CB_ID : + hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; + break; + case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : + hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; + break; + default : + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if(HAL_DFSDM_FILTER_STATE_RESET == hdfsdm_filter->State) + { + switch (CallbackID) + { + case HAL_DFSDM_FILTER_MSPINIT_CB_ID : + hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; + break; + case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : + hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; + break; + default : + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + return status; +} + +/** + * @brief Register a user DFSDM filter analog watchdog callback + * to be used instead of the weak predefined callback. + * @param hdfsdm_filter DFSDM filter handle. + * @param pCallback pointer to the DFSDM filter analog watchdog callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + pDFSDM_Filter_AwdCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(pCallback == NULL) + { + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + else + { + if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) + { + hdfsdm_filter->AwdCallback = pCallback; + } + else + { + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Unregister a user DFSDM filter analog watchdog callback. + * DFSDM filter AWD callback is redirected to the weak predefined callback. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) + { + hdfsdm_filter->AwdCallback = HAL_DFSDM_FilterAwdCallback; + } + else + { + /* update the error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + return status; +} +#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DFSDM_Exported_Functions_Group2_Filter Filter control functions + * @brief Filter control functions + * +@verbatim + ============================================================================== + ##### Filter control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Select channel and enable/disable continuous mode for regular conversion. + (+) Select channels for injected conversion. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to select channel and to enable/disable + * continuous mode for regular conversion. + * @param hdfsdm_filter DFSDM filter handle. + * @param Channel Channel for regular conversion. + * This parameter can be a value of @ref DFSDM_Channel_Selection. + * @param ContinuousMode Enable/disable continuous mode for regular conversion. + * This parameter can be a value of @ref DFSDM_ContinuousMode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Channel, + uint32_t ContinuousMode) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(IS_DFSDM_REGULAR_CHANNEL(Channel)); + assert_param(IS_DFSDM_CONTINUOUS_MODE(ContinuousMode)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) && + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR)) + { + /* Configure channel and continuous mode for regular conversion */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RCH | DFSDM_FLTCR1_RCONT); + if(ContinuousMode == DFSDM_CONTINUOUS_CONV_ON) + { + hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) (((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET) | + DFSDM_FLTCR1_RCONT); + } + else + { + hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) ((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET); + } + /* Store continuous mode information */ + hdfsdm_filter->RegularContMode = ContinuousMode; + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief This function allows to select channels for injected conversion. + * @param hdfsdm_filter DFSDM filter handle. + * @param Channel Channels for injected conversion. + * This parameter can be a values combination of @ref DFSDM_Channel_Selection. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) && + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR)) + { + /* Configure channel for injected conversion */ + hdfsdm_filter->Instance->FLTJCHGR = (uint32_t) (Channel & DFSDM_LSB_MASK); + /* Store number of injected channels */ + hdfsdm_filter->InjectedChannelsNbr = DFSDM_GetInjChannelsNbr(Channel); + /* Update number of injected channels remaining */ + hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ + hdfsdm_filter->InjectedChannelsNbr : 1U; + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions + * @brief Filter operation functions + * +@verbatim + ============================================================================== + ##### Filter operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion of regular/injected channel. + (+) Poll for the end of regular/injected conversion. + (+) Stop conversion of regular/injected channel. + (+) Start conversion of regular/injected channel and enable interrupt. + (+) Call the callback functions at the end of regular/injected conversions. + (+) Stop conversion of regular/injected channel and disable interrupt. + (+) Start conversion of regular/injected channel and enable DMA transfer. + (+) Stop conversion of regular/injected channel and disable DMA transfer. + (+) Start analog watchdog and enable interrupt. + (+) Call the callback function when analog watchdog occurs. + (+) Stop analog watchdog and disable interrupt. + (+) Start extreme detector. + (+) Stop extreme detector. + (+) Get result of regular channel conversion. + (+) Get result of injected channel conversion. + (+) Get extreme detector maximum and minimum values. + (+) Get conversion time. + (+) Handle DFSDM interrupt request. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to start regular conversion in polling mode. + * @note This function should be called only when DFSDM filter instance is + * in idle state or if injected conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) + { + /* Start regular conversion */ + DFSDM_RegConvStart(hdfsdm_filter); + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to poll for the end of regular conversion. + * @note This function should be called only if regular conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @param Timeout Timeout value in milliseconds. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) + { + /* Return error status */ + return HAL_ERROR; + } + else + { + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait end of regular conversion */ + while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_REOCF) != DFSDM_FLTISR_REOCF) + { + /* Check the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Return timeout status */ + return HAL_TIMEOUT; + } + } + } + /* Check if overrun occurs */ + if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_ROVRF) == DFSDM_FLTISR_ROVRF) + { + /* Update error code and call error callback */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN; +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->ErrorCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); +#endif + + /* Clear regular overrun flag */ + hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF; + } + /* Update DFSDM filter state only if not continuous conversion and SW trigger */ + if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ + (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) + { + hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ + HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; + } + /* Return function status */ + return HAL_OK; + } +} + +/** + * @brief This function allows to stop regular conversion in polling mode. + * @note This function should be called only if regular conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Stop regular conversion */ + DFSDM_RegConvStop(hdfsdm_filter); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start regular conversion in interrupt mode. + * @note This function should be called only when DFSDM filter instance is + * in idle state or if injected conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) + { + /* Enable interrupts for regular conversions */ + hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE); + + /* Start regular conversion */ + DFSDM_RegConvStart(hdfsdm_filter); + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop regular conversion in interrupt mode. + * @note This function should be called only if regular conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Disable interrupts for regular conversions */ + hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE); + + /* Stop regular conversion */ + DFSDM_RegConvStop(hdfsdm_filter); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start regular conversion in DMA mode. + * @note This function should be called only when DFSDM filter instance is + * in idle state or if injected conversion is ongoing. + * Please note that data on buffer will contain signed regular conversion + * value on 24 most significant bits and corresponding channel on 3 least + * significant bits. + * @param hdfsdm_filter DFSDM filter handle. + * @param pData The destination buffer address. + * @param Length The length of data to be transferred from DFSDM filter to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + int32_t *pData, + uint32_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check destination address and length */ + if((pData == NULL) || (Length == 0U)) + { + status = HAL_ERROR; + } + /* Check that DMA is enabled for regular conversion */ + else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN) + { + status = HAL_ERROR; + } + /* Check parameters compatibility */ + else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ + (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ + (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \ + (Length != 1U)) + { + status = HAL_ERROR; + } + else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ + (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ + (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR)) + { + status = HAL_ERROR; + } + /* Check DFSDM filter state */ + else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) + { + /* Set callbacks on DMA handler */ + hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt; + hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError; + hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\ + DFSDM_DMARegularHalfConvCplt : NULL; + + /* Start DMA in interrupt mode */ + if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)&hdfsdm_filter->Instance->FLTRDATAR, \ + (uint32_t) pData, Length) != HAL_OK) + { + /* Set DFSDM filter in error state */ + hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; + status = HAL_ERROR; + } + else + { + /* Start regular conversion */ + DFSDM_RegConvStart(hdfsdm_filter); + } + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start regular conversion in DMA mode and to get + * only the 16 most significant bits of conversion. + * @note This function should be called only when DFSDM filter instance is + * in idle state or if injected conversion is ongoing. + * Please note that data on buffer will contain signed 16 most significant + * bits of regular conversion. + * @param hdfsdm_filter DFSDM filter handle. + * @param pData The destination buffer address. + * @param Length The length of data to be transferred from DFSDM filter to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + int16_t *pData, + uint32_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check destination address and length */ + if((pData == NULL) || (Length == 0U)) + { + status = HAL_ERROR; + } + /* Check that DMA is enabled for regular conversion */ + else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN) + { + status = HAL_ERROR; + } + /* Check parameters compatibility */ + else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ + (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ + (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \ + (Length != 1U)) + { + status = HAL_ERROR; + } + else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ + (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ + (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR)) + { + status = HAL_ERROR; + } + /* Check DFSDM filter state */ + else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) + { + /* Set callbacks on DMA handler */ + hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt; + hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError; + hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\ + DFSDM_DMARegularHalfConvCplt : NULL; + + /* Start DMA in interrupt mode */ + if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)(&hdfsdm_filter->Instance->FLTRDATAR) + 2U, \ + (uint32_t) pData, Length) != HAL_OK) + { + /* Set DFSDM filter in error state */ + hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; + status = HAL_ERROR; + } + else + { + /* Start regular conversion */ + DFSDM_RegConvStart(hdfsdm_filter); + } + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop regular conversion in DMA mode. + * @note This function should be called only if regular conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Stop current DMA transfer */ + if(HAL_DMA_Abort(hdfsdm_filter->hdmaReg) != HAL_OK) + { + /* Set DFSDM filter in error state */ + hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; + status = HAL_ERROR; + } + else + { + /* Stop regular conversion */ + DFSDM_RegConvStop(hdfsdm_filter); + } + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to get regular conversion value. + * @param hdfsdm_filter DFSDM filter handle. + * @param Channel Corresponding channel of regular conversion. + * @retval Regular conversion value + */ +int32_t HAL_DFSDM_FilterGetRegularValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t *Channel) +{ + uint32_t reg; + int32_t value; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(Channel != (void *)0); + + /* Get value of data register for regular channel */ + reg = hdfsdm_filter->Instance->FLTRDATAR; + + /* Extract channel and regular conversion value */ + *Channel = (reg & DFSDM_FLTRDATAR_RDATACH); + /* Regular conversion value is a signed value located on 24 MSB of register */ + /* So after applying a mask on these bits we have to perform a division by 256 (2 raised to the power of 8) */ + reg &= DFSDM_FLTRDATAR_RDATA; + value = ((int32_t)reg) / 256; + + /* return regular conversion value */ + return value; +} + +/** + * @brief This function allows to start injected conversion in polling mode. + * @note This function should be called only when DFSDM filter instance is + * in idle state or if regular conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) + { + /* Start injected conversion */ + DFSDM_InjConvStart(hdfsdm_filter); + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to poll for the end of injected conversion. + * @note This function should be called only if injected conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @param Timeout Timeout value in milliseconds. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) + { + /* Return error status */ + return HAL_ERROR; + } + else + { + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait end of injected conversions */ + while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JEOCF) != DFSDM_FLTISR_JEOCF) + { + /* Check the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Return timeout status */ + return HAL_TIMEOUT; + } + } + } + /* Check if overrun occurs */ + if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JOVRF) == DFSDM_FLTISR_JOVRF) + { + /* Update error code and call error callback */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN; +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->ErrorCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); +#endif + + /* Clear injected overrun flag */ + hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF; + } + + /* Update remaining injected conversions */ + hdfsdm_filter->InjConvRemaining--; + if(hdfsdm_filter->InjConvRemaining == 0U) + { + /* Update DFSDM filter state only if trigger is software */ + if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) + { + hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ + HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; + } + + /* end of injected sequence, reset the value */ + hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ + hdfsdm_filter->InjectedChannelsNbr : 1U; + } + + /* Return function status */ + return HAL_OK; + } +} + +/** + * @brief This function allows to stop injected conversion in polling mode. + * @note This function should be called only if injected conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Stop injected conversion */ + DFSDM_InjConvStop(hdfsdm_filter); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start injected conversion in interrupt mode. + * @note This function should be called only when DFSDM filter instance is + * in idle state or if regular conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) + { + /* Enable interrupts for injected conversions */ + hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE); + + /* Start injected conversion */ + DFSDM_InjConvStart(hdfsdm_filter); + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop injected conversion in interrupt mode. + * @note This function should be called only if injected conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Disable interrupts for injected conversions */ + hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE); + + /* Stop injected conversion */ + DFSDM_InjConvStop(hdfsdm_filter); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start injected conversion in DMA mode. + * @note This function should be called only when DFSDM filter instance is + * in idle state or if regular conversion is ongoing. + * Please note that data on buffer will contain signed injected conversion + * value on 24 most significant bits and corresponding channel on 3 least + * significant bits. + * @param hdfsdm_filter DFSDM filter handle. + * @param pData The destination buffer address. + * @param Length The length of data to be transferred from DFSDM filter to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + int32_t *pData, + uint32_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check destination address and length */ + if((pData == NULL) || (Length == 0U)) + { + status = HAL_ERROR; + } + /* Check that DMA is enabled for injected conversion */ + else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN) + { + status = HAL_ERROR; + } + /* Check parameters compatibility */ + else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ + (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \ + (Length > hdfsdm_filter->InjConvRemaining)) + { + status = HAL_ERROR; + } + else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ + (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR)) + { + status = HAL_ERROR; + } + /* Check DFSDM filter state */ + else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) + { + /* Set callbacks on DMA handler */ + hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt; + hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError; + hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\ + DFSDM_DMAInjectedHalfConvCplt : NULL; + + /* Start DMA in interrupt mode */ + if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)&hdfsdm_filter->Instance->FLTJDATAR, \ + (uint32_t) pData, Length) != HAL_OK) + { + /* Set DFSDM filter in error state */ + hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; + status = HAL_ERROR; + } + else + { + /* Start injected conversion */ + DFSDM_InjConvStart(hdfsdm_filter); + } + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start injected conversion in DMA mode and to get + * only the 16 most significant bits of conversion. + * @note This function should be called only when DFSDM filter instance is + * in idle state or if regular conversion is ongoing. + * Please note that data on buffer will contain signed 16 most significant + * bits of injected conversion. + * @param hdfsdm_filter DFSDM filter handle. + * @param pData The destination buffer address. + * @param Length The length of data to be transferred from DFSDM filter to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + int16_t *pData, + uint32_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check destination address and length */ + if((pData == NULL) || (Length == 0U)) + { + status = HAL_ERROR; + } + /* Check that DMA is enabled for injected conversion */ + else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN) + { + status = HAL_ERROR; + } + /* Check parameters compatibility */ + else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ + (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \ + (Length > hdfsdm_filter->InjConvRemaining)) + { + status = HAL_ERROR; + } + else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ + (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR)) + { + status = HAL_ERROR; + } + /* Check DFSDM filter state */ + else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) + { + /* Set callbacks on DMA handler */ + hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt; + hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError; + hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\ + DFSDM_DMAInjectedHalfConvCplt : NULL; + + /* Start DMA in interrupt mode */ + if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)(&hdfsdm_filter->Instance->FLTJDATAR) + 2U, \ + (uint32_t) pData, Length) != HAL_OK) + { + /* Set DFSDM filter in error state */ + hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; + status = HAL_ERROR; + } + else + { + /* Start injected conversion */ + DFSDM_InjConvStart(hdfsdm_filter); + } + } + else + { + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop injected conversion in DMA mode. + * @note This function should be called only if injected conversion is ongoing. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ + (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Stop current DMA transfer */ + if(HAL_DMA_Abort(hdfsdm_filter->hdmaInj) != HAL_OK) + { + /* Set DFSDM filter in error state */ + hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; + status = HAL_ERROR; + } + else + { + /* Stop regular conversion */ + DFSDM_InjConvStop(hdfsdm_filter); + } + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to get injected conversion value. + * @param hdfsdm_filter DFSDM filter handle. + * @param Channel Corresponding channel of injected conversion. + * @retval Injected conversion value + */ +int32_t HAL_DFSDM_FilterGetInjectedValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t *Channel) +{ + uint32_t reg; + int32_t value; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(Channel != (void *)0); + + /* Get value of data register for injected channel */ + reg = hdfsdm_filter->Instance->FLTJDATAR; + + /* Extract channel and injected conversion value */ + *Channel = (reg & DFSDM_FLTJDATAR_JDATACH); + /* Injected conversion value is a signed value located on 24 MSB of register */ + /* So after applying a mask on these bits we have to perform a division by 256 (2 raised to the power of 8) */ + reg &= DFSDM_FLTJDATAR_JDATA; + value = ((int32_t)reg) / 256; + + /* return regular conversion value */ + return value; +} + +/** + * @brief This function allows to start filter analog watchdog in interrupt mode. + * @param hdfsdm_filter DFSDM filter handle. + * @param awdParam DFSDM filter analog watchdog parameters. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + const DFSDM_Filter_AwdParamTypeDef *awdParam) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(IS_DFSDM_FILTER_AWD_DATA_SOURCE(awdParam->DataSource)); + assert_param(IS_DFSDM_INJECTED_CHANNEL(awdParam->Channel)); + assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->HighThreshold)); + assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->LowThreshold)); + assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->HighBreakSignal)); + assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->LowBreakSignal)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Set analog watchdog data source */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL); + hdfsdm_filter->Instance->FLTCR1 |= awdParam->DataSource; + + /* Set thresholds and break signals */ + hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH); + hdfsdm_filter->Instance->FLTAWHTR |= (((uint32_t) awdParam->HighThreshold << DFSDM_FLTAWHTR_AWHT_Pos) | \ + awdParam->HighBreakSignal); + hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL); + hdfsdm_filter->Instance->FLTAWLTR |= (((uint32_t) awdParam->LowThreshold << DFSDM_FLTAWLTR_AWLT_Pos) | \ + awdParam->LowBreakSignal); + + /* Set channels and interrupt for analog watchdog */ + hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH); + hdfsdm_filter->Instance->FLTCR2 |= (((awdParam->Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_AWDCH_Pos) | \ + DFSDM_FLTCR2_AWDIE); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop filter analog watchdog in interrupt mode. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Reset channels for analog watchdog and deactivate interrupt */ + hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH | DFSDM_FLTCR2_AWDIE); + + /* Clear all analog watchdog flags */ + hdfsdm_filter->Instance->FLTAWCFR = (DFSDM_FLTAWCFR_CLRAWHTF | DFSDM_FLTAWCFR_CLRAWLTF); + + /* Reset thresholds and break signals */ + hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH); + hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL); + + /* Reset analog watchdog data source */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to start extreme detector feature. + * @param hdfsdm_filter DFSDM filter handle. + * @param Channel Channels where extreme detector is enabled. + * This parameter can be a values combination of @ref DFSDM_Channel_Selection. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Set channels for extreme detector */ + hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH); + hdfsdm_filter->Instance->FLTCR2 |= ((Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_EXCH_Pos); + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to stop extreme detector feature. + * @param hdfsdm_filter DFSDM filter handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + HAL_StatusTypeDef status = HAL_OK; + __IO uint32_t reg1; + __IO uint32_t reg2; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Check DFSDM filter state */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ + (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) + { + /* Return error status */ + status = HAL_ERROR; + } + else + { + /* Reset channels for extreme detector */ + hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH); + + /* Clear extreme detector values */ + reg1 = hdfsdm_filter->Instance->FLTEXMAX; + reg2 = hdfsdm_filter->Instance->FLTEXMIN; + UNUSED(reg1); /* To avoid GCC warning */ + UNUSED(reg2); /* To avoid GCC warning */ + } + /* Return function status */ + return status; +} + +/** + * @brief This function allows to get extreme detector maximum value. + * @param hdfsdm_filter DFSDM filter handle. + * @param Channel Corresponding channel. + * @retval Extreme detector maximum value + * This value is between Min_Data = -8388608 and Max_Data = 8388607. + */ +int32_t HAL_DFSDM_FilterGetExdMaxValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t *Channel) +{ + uint32_t reg; + int32_t value; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(Channel != (void *)0); + + /* Get value of extreme detector maximum register */ + reg = hdfsdm_filter->Instance->FLTEXMAX; + + /* Extract channel and extreme detector maximum value */ + *Channel = (reg & DFSDM_FLTEXMAX_EXMAXCH); + /* Extreme detector maximum value is a signed value located on 24 MSB of register */ + /* So after applying a mask on these bits we have to perform a division by 256 (2 raised to the power of 8) */ + reg &= DFSDM_FLTEXMAX_EXMAX; + value = ((int32_t)reg) / 256; + + /* return extreme detector maximum value */ + return value; +} + +/** + * @brief This function allows to get extreme detector minimum value. + * @param hdfsdm_filter DFSDM filter handle. + * @param Channel Corresponding channel. + * @retval Extreme detector minimum value + * This value is between Min_Data = -8388608 and Max_Data = 8388607. + */ +int32_t HAL_DFSDM_FilterGetExdMinValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t *Channel) +{ + uint32_t reg; + int32_t value; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + assert_param(Channel != (void *)0); + + /* Get value of extreme detector minimum register */ + reg = hdfsdm_filter->Instance->FLTEXMIN; + + /* Extract channel and extreme detector minimum value */ + *Channel = (reg & DFSDM_FLTEXMIN_EXMINCH); + /* Extreme detector minimum value is a signed value located on 24 MSB of register */ + /* So after applying a mask on these bits we have to perform a division by 256 (2 raised to the power of 8) */ + reg &= DFSDM_FLTEXMIN_EXMIN; + value = ((int32_t)reg) / 256; + + /* return extreme detector minimum value */ + return value; +} + +/** + * @brief This function allows to get conversion time value. + * @param hdfsdm_filter DFSDM filter handle. + * @retval Conversion time value + * @note To get time in second, this value has to be divided by DFSDM clock frequency. + */ +uint32_t HAL_DFSDM_FilterGetConvTimeValue(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + uint32_t reg; + uint32_t value; + + /* Check parameters */ + assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); + + /* Get value of conversion timer register */ + reg = hdfsdm_filter->Instance->FLTCNVTIMR; + + /* Extract conversion time value */ + value = ((reg & DFSDM_FLTCNVTIMR_CNVCNT) >> DFSDM_FLTCNVTIMR_CNVCNT_Pos); + + /* return extreme detector minimum value */ + return value; +} + +/** + * @brief This function handles the DFSDM interrupts. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + DFSDM_Channel_HandleTypeDef **channelHandleTable; + const DFSDM_Filter_TypeDef *filter0Instance; + uint32_t channelNumber; + + /* Get FTLISR and FLTCR2 register values */ + const uint32_t temp_fltisr = hdfsdm_filter->Instance->FLTISR; + const uint32_t temp_fltcr2 = hdfsdm_filter->Instance->FLTCR2; + +#if defined(DFSDM2_Channel0) + if (IS_DFSDM1_FILTER_INSTANCE(hdfsdm_filter->Instance)) + { + channelHandleTable = a_dfsdm1ChannelHandle; + filter0Instance = DFSDM1_Filter0; + channelNumber = DFSDM1_CHANNEL_NUMBER; + } + else + { + channelHandleTable = a_dfsdm2ChannelHandle; + filter0Instance = DFSDM2_Filter0; + channelNumber = DFSDM2_CHANNEL_NUMBER; + } +#else /* DFSDM2_Channel0 */ + channelHandleTable = a_dfsdm1ChannelHandle; + filter0Instance = DFSDM1_Filter0; + channelNumber = DFSDM1_CHANNEL_NUMBER; +#endif /* DFSDM2_Channel0 */ + + /* Check if overrun occurs during regular conversion */ + if(((temp_fltisr & DFSDM_FLTISR_ROVRF) != 0U) && \ + ((temp_fltcr2 & DFSDM_FLTCR2_ROVRIE) != 0U)) + { + /* Clear regular overrun flag */ + hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF; + + /* Update error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN; + + /* Call error callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->ErrorCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); +#endif + } + /* Check if overrun occurs during injected conversion */ + else if(((temp_fltisr & DFSDM_FLTISR_JOVRF) != 0U) && \ + ((temp_fltcr2 & DFSDM_FLTCR2_JOVRIE) != 0U)) + { + /* Clear injected overrun flag */ + hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF; + + /* Update error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN; + + /* Call error callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->ErrorCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); +#endif + } + /* Check if end of regular conversion */ + else if(((temp_fltisr & DFSDM_FLTISR_REOCF) != 0U) && \ + ((temp_fltcr2 & DFSDM_FLTCR2_REOCIE) != 0U)) + { + /* Call regular conversion complete callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->RegConvCpltCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter); +#endif + + /* End of conversion if mode is not continuous and software trigger */ + if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ + (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) + { + /* Disable interrupts for regular conversions */ + hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE); + + /* Update DFSDM filter state */ + hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ + HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; + } + } + /* Check if end of injected conversion */ + else if(((temp_fltisr & DFSDM_FLTISR_JEOCF) != 0U) && \ + ((temp_fltcr2 & DFSDM_FLTCR2_JEOCIE) != 0U)) + { + /* Call injected conversion complete callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->InjConvCpltCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter); +#endif + + /* Update remaining injected conversions */ + hdfsdm_filter->InjConvRemaining--; + if(hdfsdm_filter->InjConvRemaining == 0U) + { + /* End of conversion if trigger is software */ + if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) + { + /* Disable interrupts for injected conversions */ + hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE); + + /* Update DFSDM filter state */ + hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ + HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; + } + /* end of injected sequence, reset the value */ + hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ + hdfsdm_filter->InjectedChannelsNbr : 1U; + } + } + /* Check if analog watchdog occurs */ + else if(((temp_fltisr & DFSDM_FLTISR_AWDF) != 0U) && \ + ((temp_fltcr2 & DFSDM_FLTCR2_AWDIE) != 0U)) + { + uint32_t reg; + uint32_t threshold; + uint32_t channel = 0; + + /* Get channel and threshold */ + reg = hdfsdm_filter->Instance->FLTAWSR; + threshold = ((reg & DFSDM_FLTAWSR_AWLTF) != 0U) ? DFSDM_AWD_LOW_THRESHOLD : DFSDM_AWD_HIGH_THRESHOLD; + if(threshold == DFSDM_AWD_HIGH_THRESHOLD) + { + reg = reg >> DFSDM_FLTAWSR_AWHTF_Pos; + } + while (((reg & 1U) == 0U) && (channel < (channelNumber - 1U))) + { + channel++; + reg = reg >> 1; + } + /* Clear analog watchdog flag */ + hdfsdm_filter->Instance->FLTAWCFR = (threshold == DFSDM_AWD_HIGH_THRESHOLD) ? \ + (1UL << (DFSDM_FLTAWSR_AWHTF_Pos + channel)) : \ + (1UL << channel); + + /* Call analog watchdog callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->AwdCallback(hdfsdm_filter, channel, threshold); +#else + HAL_DFSDM_FilterAwdCallback(hdfsdm_filter, channel, threshold); +#endif + } + /* Check if clock absence occurs */ + else if((hdfsdm_filter->Instance == filter0Instance) && \ + ((temp_fltisr & DFSDM_FLTISR_CKABF) != 0U) && \ + ((temp_fltcr2 & DFSDM_FLTCR2_CKABIE) != 0U)) + { + uint32_t reg; + uint32_t channel = 0; + + reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) >> DFSDM_FLTISR_CKABF_Pos); + + while (channel < channelNumber) + { + /* Check if flag is set and corresponding channel is enabled */ + if (((reg & 1U) != 0U) && (channelHandleTable[channel] != NULL)) + { + /* Check clock absence has been enabled for this channel */ + if ((channelHandleTable[channel]->Instance->CHCFGR1 & DFSDM_CHCFGR1_CKABEN) != 0U) + { + /* Clear clock absence flag */ + hdfsdm_filter->Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); + + /* Call clock absence callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + channelHandleTable[channel]->CkabCallback(channelHandleTable[channel]); +#else + HAL_DFSDM_ChannelCkabCallback(channelHandleTable[channel]); +#endif + } + } + channel++; + reg = reg >> 1; + } + } + /* Check if short circuit detection occurs */ + else if((hdfsdm_filter->Instance == filter0Instance) && \ + ((temp_fltisr & DFSDM_FLTISR_SCDF) != 0U) && \ + ((temp_fltcr2 & DFSDM_FLTCR2_SCDIE) != 0U)) + { + uint32_t reg; + uint32_t channel = 0; + + /* Get channel */ + reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) >> DFSDM_FLTISR_SCDF_Pos); + while (((reg & 1U) == 0U) && (channel < (channelNumber - 1U))) + { + channel++; + reg = reg >> 1; + } + + /* Clear short circuit detection flag */ + hdfsdm_filter->Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); + + /* Call short circuit detection callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + channelHandleTable[channel]->ScdCallback(channelHandleTable[channel]); +#else + HAL_DFSDM_ChannelScdCallback(channelHandleTable[channel]); +#endif + } +} + +/** + * @brief Regular conversion complete callback. + * @note In interrupt mode, user has to read conversion value in this function + * using HAL_DFSDM_FilterGetRegularValue. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +__weak void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_filter); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DFSDM_FilterRegConvCpltCallback could be implemented in the user file. + */ +} + +/** + * @brief Half regular conversion complete callback. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +__weak void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_filter); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DFSDM_FilterRegConvHalfCpltCallback could be implemented in the user file. + */ +} + +/** + * @brief Injected conversion complete callback. + * @note In interrupt mode, user has to read conversion value in this function + * using HAL_DFSDM_FilterGetInjectedValue. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +__weak void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_filter); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DFSDM_FilterInjConvCpltCallback could be implemented in the user file. + */ +} + +/** + * @brief Half injected conversion complete callback. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +__weak void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_filter); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DFSDM_FilterInjConvHalfCpltCallback could be implemented in the user file. + */ +} + +/** + * @brief Filter analog watchdog callback. + * @param hdfsdm_filter DFSDM filter handle. + * @param Channel Corresponding channel. + * @param Threshold Low or high threshold has been reached. + * @retval None + */ +__weak void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, + uint32_t Channel, uint32_t Threshold) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_filter); + UNUSED(Channel); + UNUSED(Threshold); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DFSDM_FilterAwdCallback could be implemented in the user file. + */ +} + +/** + * @brief Error callback. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +__weak void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdfsdm_filter); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DFSDM_FilterErrorCallback could be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup DFSDM_Exported_Functions_Group4_Filter Filter state functions + * @brief Filter state functions + * +@verbatim + ============================================================================== + ##### Filter state functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Get the DFSDM filter state. + (+) Get the DFSDM filter error. +@endverbatim + * @{ + */ + +/** + * @brief This function allows to get the current DFSDM filter handle state. + * @param hdfsdm_filter DFSDM filter handle. + * @retval DFSDM filter state. + */ +HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Return DFSDM filter handle state */ + return hdfsdm_filter->State; +} + +/** + * @brief This function allows to get the current DFSDM filter error. + * @param hdfsdm_filter DFSDM filter handle. + * @retval DFSDM filter error code. + */ +uint32_t HAL_DFSDM_FilterGetError(const DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + return hdfsdm_filter->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup DFSDM_Private_Functions DFSDM Private Functions + * @{ + */ + +/** + * @brief DMA half transfer complete callback for regular conversion. + * @param hdma DMA handle. + * @retval None + */ +static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Get DFSDM filter handle */ + DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; + + /* Call regular half conversion complete callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->RegConvHalfCpltCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterRegConvHalfCpltCallback(hdfsdm_filter); +#endif +} + +/** + * @brief DMA transfer complete callback for regular conversion. + * @param hdma DMA handle. + * @retval None + */ +static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Get DFSDM filter handle */ + DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; + + /* Call regular conversion complete callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->RegConvCpltCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter); +#endif +} + +/** + * @brief DMA half transfer complete callback for injected conversion. + * @param hdma DMA handle. + * @retval None + */ +static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Get DFSDM filter handle */ + DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; + + /* Call injected half conversion complete callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->InjConvHalfCpltCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterInjConvHalfCpltCallback(hdfsdm_filter); +#endif +} + +/** + * @brief DMA transfer complete callback for injected conversion. + * @param hdma DMA handle. + * @retval None + */ +static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Get DFSDM filter handle */ + DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; + + /* Call injected conversion complete callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->InjConvCpltCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter); +#endif +} + +/** + * @brief DMA error callback. + * @param hdma DMA handle. + * @retval None + */ +static void DFSDM_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Get DFSDM filter handle */ + DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; + + /* Update error code */ + hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_DMA; + + /* Call error callback */ +#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) + hdfsdm_filter->ErrorCallback(hdfsdm_filter); +#else + HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); +#endif +} + +/** + * @brief This function allows to get the number of injected channels. + * @param Channels bitfield of injected channels. + * @retval Number of injected channels. + */ +static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels) +{ + uint32_t nbChannels = 0; + uint32_t tmp; + + /* Get the number of channels from bitfield */ + tmp = (uint32_t)(Channels & DFSDM_LSB_MASK); + while(tmp != 0U) + { + if((tmp & 1U) != 0U) + { + nbChannels++; + } + tmp = (uint32_t)(tmp >> 1); + } + return nbChannels; +} + +/** + * @brief This function allows to get the channel number from channel instance. + * @param Instance DFSDM channel instance. + * @retval Channel number. + */ +static uint32_t DFSDM_GetChannelFromInstance(const DFSDM_Channel_TypeDef* Instance) +{ + uint32_t channel; + + /* Get channel from instance */ + if(Instance == DFSDM1_Channel0) + { + channel = 0; + } +#if defined(DFSDM2_Channel0) + else if (Instance == DFSDM2_Channel0) + { + channel = 0; + } + else if (Instance == DFSDM2_Channel1) + { + channel = 1; + } +#endif /* DFSDM2_Channel0 */ + else if(Instance == DFSDM1_Channel1) + { + channel = 1; + } + else if(Instance == DFSDM1_Channel2) + { + channel = 2; + } + else if(Instance == DFSDM1_Channel3) + { + channel = 3; + } + else if(Instance == DFSDM1_Channel4) + { + channel = 4; + } + else if(Instance == DFSDM1_Channel5) + { + channel = 5; + } + else if(Instance == DFSDM1_Channel6) + { + channel = 6; + } + else /* DFSDM1_Channel7 */ + { + channel = 7; + } + + return channel; +} + +/** + * @brief This function allows to really start regular conversion. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Check regular trigger */ + if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) + { + /* Software start of regular conversion */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; + } + else /* synchronous trigger */ + { + /* Disable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); + + /* Set RSYNC bit in DFSDM_FLTCR1 register */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSYNC; + + /* Enable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; + + /* If injected conversion was in progress, restart it */ + if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) + { + if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) + { + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; + } + /* Update remaining injected conversions */ + hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ + hdfsdm_filter->InjectedChannelsNbr : 1U; + } + } + /* Update DFSDM filter state */ + hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \ + HAL_DFSDM_FILTER_STATE_REG : HAL_DFSDM_FILTER_STATE_REG_INJ; +} + +/** + * @brief This function allows to really stop regular conversion. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Disable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); + + /* If regular trigger was synchronous, reset RSYNC bit in DFSDM_FLTCR1 register */ + if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SYNC_TRIGGER) + { + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC); + } + + /* Enable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; + + /* If injected conversion was in progress, restart it */ + if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ) + { + if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) + { + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; + } + /* Update remaining injected conversions */ + hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ + hdfsdm_filter->InjectedChannelsNbr : 1U; + } + + /* Update DFSDM filter state */ + hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ + HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; +} + +/** + * @brief This function allows to really start injected conversion. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Check injected trigger */ + if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) + { + /* Software start of injected conversion */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; + } + else /* external or synchronous trigger */ + { + /* Disable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); + + if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER) + { + /* Set JSYNC bit in DFSDM_FLTCR1 register */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSYNC; + } + else /* external trigger */ + { + /* Set JEXTEN[1:0] bits in DFSDM_FLTCR1 register */ + hdfsdm_filter->Instance->FLTCR1 |= hdfsdm_filter->ExtTriggerEdge; + } + + /* Enable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; + + /* If regular conversion was in progress, restart it */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) && \ + (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) + { + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; + } + } + /* Update DFSDM filter state */ + hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \ + HAL_DFSDM_FILTER_STATE_INJ : HAL_DFSDM_FILTER_STATE_REG_INJ; +} + +/** + * @brief This function allows to really stop injected conversion. + * @param hdfsdm_filter DFSDM filter handle. + * @retval None + */ +static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) +{ + /* Disable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); + + /* If injected trigger was synchronous, reset JSYNC bit in DFSDM_FLTCR1 register */ + if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER) + { + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC); + } + else if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_EXT_TRIGGER) + { + /* Reset JEXTEN[1:0] bits in DFSDM_FLTCR1 register */ + hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JEXTEN); + } + else + { + /* Nothing to do */ + } + + /* Enable DFSDM filter */ + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; + + /* If regular conversion was in progress, restart it */ + if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ) && \ + (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) + { + hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; + } + + /* Update remaining injected conversions */ + hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ + hdfsdm_filter->InjectedChannelsNbr : 1U; + + /* Update DFSDM filter state */ + hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ + HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; +} + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c new file mode 100644 index 0000000..dada223 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c @@ -0,0 +1,2062 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Stream + (except for internal SRAM/FLASH memories: no initialization is + necessary) please refer to Reference manual for connection between peripherals + and DMA requests . + + (#) For a given Stream, program the required configuration through the following parameters: + Transfer Direction, Source and Destination data formats, + Circular, Normal or peripheral flow control mode, Stream Priority level, + Source and Destination Increment mode, FIFO mode and its Threshold (if needed), + Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. In this + case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e a member of DMA handle structure). + [..] + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is + possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set + Half-Word data size for the peripheral to access its data register and set Word data size + for the Memory to gain in access time. Each two half words will be packed and written in + a single access to a Word in the Memory). + + -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source + and Destination. In this case the Peripheral Data Size will be applied to both Source + and Destination. + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream. + (+) __HAL_DMA_GET_FS: Return the current DMA Stream FIFO filled level. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Stream interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Stream interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/** @addtogroup DMA_Private_Types + * @{ + */ +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register */ + __IO uint32_t Reserved0; + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */ +} DMA_Base_Registers; + +typedef struct +{ + __IO uint32_t ISR; /*!< BDMA interrupt status register */ + __IO uint32_t IFCR; /*!< BDMA interrupt flag clear register */ +} BDMA_Base_Registers; +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup DMA_Private_Constants + * @{ + */ +#define HAL_TIMEOUT_DMA_ABORT (5U) /* 5 ms */ + +#define BDMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */ +#define BDMA_MEMORY_TO_PERIPH ((uint32_t)BDMA_CCR_DIR) /*!< Memory to peripheral direction */ +#define BDMA_MEMORY_TO_MEMORY ((uint32_t)BDMA_CCR_MEM2MEM) /*!< Memory to memory direction */ + +/* DMA to BDMA conversion */ +#define DMA_TO_BDMA_DIRECTION(__DMA_DIRECTION__) (((__DMA_DIRECTION__) == DMA_MEMORY_TO_PERIPH)? BDMA_MEMORY_TO_PERIPH: \ + ((__DMA_DIRECTION__) == DMA_MEMORY_TO_MEMORY)? BDMA_MEMORY_TO_MEMORY: \ + BDMA_PERIPH_TO_MEMORY) + +#define DMA_TO_BDMA_PERIPHERAL_INC(__DMA_PERIPHERAL_INC__) ((__DMA_PERIPHERAL_INC__) >> 3U) +#define DMA_TO_BDMA_MEMORY_INC(__DMA_MEMORY_INC__) ((__DMA_MEMORY_INC__) >> 3U) + +#define DMA_TO_BDMA_PDATA_SIZE(__DMA_PDATA_SIZE__) ((__DMA_PDATA_SIZE__) >> 3U) +#define DMA_TO_BDMA_MDATA_SIZE(__DMA_MDATA_SIZE__) ((__DMA_MDATA_SIZE__) >> 3U) + +#define DMA_TO_BDMA_MODE(__DMA_MODE__) ((__DMA_MODE__) >> 3U) + +#define DMA_TO_BDMA_PRIORITY(__DMA_PRIORITY__) ((__DMA_PRIORITY__) >> 4U) + +#if defined(UART9) +#define IS_DMA_UART_USART_REQUEST(__REQUEST__) ((((__REQUEST__) >= DMA_REQUEST_USART1_RX) && ((__REQUEST__) <= DMA_REQUEST_USART3_TX)) || \ + (((__REQUEST__) >= DMA_REQUEST_UART4_RX) && ((__REQUEST__) <= DMA_REQUEST_UART5_TX )) || \ + (((__REQUEST__) >= DMA_REQUEST_USART6_RX) && ((__REQUEST__) <= DMA_REQUEST_USART6_TX)) || \ + (((__REQUEST__) >= DMA_REQUEST_UART7_RX) && ((__REQUEST__) <= DMA_REQUEST_UART8_TX )) || \ + (((__REQUEST__) >= DMA_REQUEST_UART9_RX) && ((__REQUEST__) <= DMA_REQUEST_USART10_TX ))) +#else +#define IS_DMA_UART_USART_REQUEST(__REQUEST__) ((((__REQUEST__) >= DMA_REQUEST_USART1_RX) && ((__REQUEST__) <= DMA_REQUEST_USART3_TX)) || \ + (((__REQUEST__) >= DMA_REQUEST_UART4_RX) && ((__REQUEST__) <= DMA_REQUEST_UART5_TX )) || \ + (((__REQUEST__) >= DMA_REQUEST_USART6_RX) && ((__REQUEST__) <= DMA_REQUEST_USART6_TX)) || \ + (((__REQUEST__) >= DMA_REQUEST_UART7_RX) && ((__REQUEST__) <= DMA_REQUEST_UART8_TX ))) + +#endif +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup DMA_Private_Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Stream source + and destination incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Stream priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + The HAL_DMA_DeInit function allows to deinitialize the DMA stream. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and create the associated handle. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t registerValue; + uint32_t tickstart = HAL_GetTick(); + DMA_Base_Registers *regs_dma; + BDMA_Base_Registers *regs_bdma; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + assert_param(IS_DMA_REQUEST(hdma->Init.Request)); + assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode)); + /* Check the memory burst, peripheral burst and FIFO threshold parameters only + when FIFO mode is enabled */ + if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE) + { + assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold)); + assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst)); + assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst)); + } + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Allocate lock resource */ + __HAL_UNLOCK(hdma); + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA Stream is effectively disabled */ + while((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_EN) != 0U) + { + /* Check for the Timeout */ + if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Get the CR register value */ + registerValue = ((DMA_Stream_TypeDef *)hdma->Instance)->CR; + + /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */ + registerValue &= ((uint32_t)~(DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ + DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ + DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ + DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM)); + + /* Prepare the DMA Stream configuration */ + registerValue |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* the Memory burst and peripheral burst are not used when the FIFO is disabled */ + if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) + { + /* Get memory burst and peripheral burst */ + registerValue |= hdma->Init.MemBurst | hdma->Init.PeriphBurst; + } + + /* Work around for Errata 2.22: UART/USART- DMA transfer lock: DMA stream could be + lock when transferring data to/from USART/UART */ +#if (STM32H7_DEV_ID == 0x450UL) + if((DBGMCU->IDCODE & 0xFFFF0000U) >= 0x20000000U) + { +#endif /* STM32H7_DEV_ID == 0x450UL */ + if(IS_DMA_UART_USART_REQUEST(hdma->Init.Request) != 0U) + { + registerValue |= DMA_SxCR_TRBUFF; + } +#if (STM32H7_DEV_ID == 0x450UL) + } +#endif /* STM32H7_DEV_ID == 0x450UL */ + + /* Write to DMA Stream CR register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR = registerValue; + + /* Get the FCR register value */ + registerValue = ((DMA_Stream_TypeDef *)hdma->Instance)->FCR; + + /* Clear Direct mode and FIFO threshold bits */ + registerValue &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); + + /* Prepare the DMA Stream FIFO configuration */ + registerValue |= hdma->Init.FIFOMode; + + /* the FIFO threshold is not used when the FIFO mode is disabled */ + if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) + { + /* Get the FIFO threshold */ + registerValue |= hdma->Init.FIFOThreshold; + + /* Check compatibility between FIFO threshold level and size of the memory burst */ + /* for INCR4, INCR8, INCR16 */ + if(hdma->Init.MemBurst != DMA_MBURST_SINGLE) + { + if (DMA_CheckFifoParam(hdma) != HAL_OK) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + return HAL_ERROR; + } + } + } + + /* Write to DMA Stream FCR */ + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR = registerValue; + + /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate + DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ + regs_dma = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags */ + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else if(IS_BDMA_CHANNEL_INSTANCE(hdma->Instance) != 0U) /* BDMA instance(s) */ + { + if(IS_BDMA_CHANNEL_DMAMUX_INSTANCE(hdma->Instance) != 0U) + { + /* Check the request parameter */ + assert_param(IS_BDMA_REQUEST(hdma->Init.Request)); + } + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Allocate lock resource */ + __HAL_UNLOCK(hdma); + + /* Get the CR register value */ + registerValue = ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, MEM2MEM, DBM and CT bits */ + registerValue &= ((uint32_t)~(BDMA_CCR_PL | BDMA_CCR_MSIZE | BDMA_CCR_PSIZE | \ + BDMA_CCR_MINC | BDMA_CCR_PINC | BDMA_CCR_CIRC | \ + BDMA_CCR_DIR | BDMA_CCR_MEM2MEM | BDMA_CCR_DBM | \ + BDMA_CCR_CT)); + + /* Prepare the DMA Channel configuration */ + registerValue |= DMA_TO_BDMA_DIRECTION(hdma->Init.Direction) | + DMA_TO_BDMA_PERIPHERAL_INC(hdma->Init.PeriphInc) | + DMA_TO_BDMA_MEMORY_INC(hdma->Init.MemInc) | + DMA_TO_BDMA_PDATA_SIZE(hdma->Init.PeriphDataAlignment) | + DMA_TO_BDMA_MDATA_SIZE(hdma->Init.MemDataAlignment) | + DMA_TO_BDMA_MODE(hdma->Init.Mode) | + DMA_TO_BDMA_PRIORITY(hdma->Init.Priority); + + /* Write to DMA Channel CR register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR = registerValue; + + /* calculation of the channel index */ + hdma->StreamIndex = (((uint32_t)((uint32_t*)hdma->Instance) - (uint32_t)BDMA_Channel0) / ((uint32_t)BDMA_Channel1 - (uint32_t)BDMA_Channel0)) << 2U; + + /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate + DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ + regs_bdma = (BDMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags */ + regs_bdma->IFCR = ((BDMA_IFCR_CGIF0) << (hdma->StreamIndex & 0x1FU)); + } + else + { + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + hdma->State = HAL_DMA_STATE_ERROR; + + return HAL_ERROR; + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask + */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if(hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Initialize parameters for DMAMUX request generator : + if the DMA request is DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR7 + */ + if((hdma->Init.Request >= DMA_REQUEST_GENERATOR0) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR7)) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register */ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + else + { + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } + } + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the DMA peripheral + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + DMA_Base_Registers *regs_dma; + BDMA_Base_Registers *regs_bdma; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Disable the selected DMA Streamx */ + __HAL_DMA_DISABLE(hdma); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Reset DMA Streamx control register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR = 0U; + + /* Reset DMA Streamx number of data to transfer register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->NDTR = 0U; + + /* Reset DMA Streamx peripheral address register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = 0U; + + /* Reset DMA Streamx memory 0 address register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = 0U; + + /* Reset DMA Streamx memory 1 address register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = 0U; + + /* Reset DMA Streamx FIFO control register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR = (uint32_t)0x00000021U; + + /* Get DMA steam Base Address */ + regs_dma = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags at correct offset within the register */ + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else if(IS_BDMA_CHANNEL_INSTANCE(hdma->Instance) != 0U) /* BDMA instance(s) */ + { + /* Reset DMA Channel control register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR = 0U; + + /* Reset DMA Channel Number of Data to Transfer register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CNDTR = 0U; + + /* Reset DMA Channel peripheral address register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = 0U; + + /* Reset DMA Channel memory 0 address register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = 0U; + + /* Reset DMA Channel memory 1 address register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = 0U; + + /* Get DMA steam Base Address */ + regs_bdma = (BDMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags at correct offset within the register */ + regs_bdma->IFCR = ((BDMA_IFCR_CGIF0) << (hdma->StreamIndex & 0x1FU)); + } + else + { + /* Return error status */ + return HAL_ERROR; + } + +#if defined (BDMA1) /* No DMAMUX available for BDMA1 available on STM32H7Ax/Bx devices only */ + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ +#endif /* BDMA1 */ + { + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if(hdma->DMAmuxChannel != 0U) + { + /* Resett he DMAMUX channel that corresponds to the DMA stream */ + hdma->DMAmuxChannel->CCR = 0U; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + } + + if((hdma->Init.Request >= DMA_REQUEST_GENERATOR0) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR7)) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register */ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } + + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferM1CpltCallback = NULL; + hdma->XferM1HalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Register and Unregister DMA callbacks + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Starts the DMA Transfer. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Enable Common interrupts*/ + MODIFY_REG(((DMA_Stream_TypeDef *)hdma->Instance)->CR, (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME | DMA_IT_HT), (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME)); + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Enable Half Transfer IT if corresponding Callback is set */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_IT_HT; + } + } + else /* BDMA channel */ + { + /* Enable Common interrupts */ + MODIFY_REG(((BDMA_Channel_TypeDef *)hdma->Instance)->CCR, (BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE), (BDMA_CCR_TCIE | BDMA_CCR_TEIE)); + + if(hdma->XferHalfCpltCallback != NULL) + { + /*Enable Half Transfer IT if corresponding Callback is set */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= BDMA_CCR_HTIE; + } + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Check if DMAMUX Synchronization is enabled */ + if((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT */ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + } + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Aborts the DMA Transfer. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * + * @note After disabling a DMA Stream, a check for wait until the DMA Stream is + * effectively disabled is added. If a Stream is disabled + * while a data transfer is ongoing, the current data will be transferred + * and the Stream will be effectively disabled only after the transfer of + * this single data is finished. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs_dma; + BDMA_Base_Registers *regs_bdma; + const __IO uint32_t *enableRegister; + + uint32_t tickstart = HAL_GetTick(); + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the DMA peripheral state */ + if(hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable all the transfer interrupts */ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Disable DMA All Interrupts */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME | DMA_IT_HT); + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR &= ~(DMA_IT_FE); + + enableRegister = (__IO uint32_t *)(&(((DMA_Stream_TypeDef *)hdma->Instance)->CR)); + } + else /* BDMA channel */ + { + /* Disable DMA All Interrupts */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR &= ~(BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE); + + enableRegister = (__IO uint32_t *)(&(((BDMA_Channel_TypeDef *)hdma->Instance)->CCR)); + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* disable the DMAMUX sync overrun IT */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + } + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA Stream is effectively disabled */ + while(((*enableRegister) & DMA_SxCR_EN) != 0U) + { + /* Check for the Timeout */ + if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + + /* Clear all interrupt flags at correct offset within the register */ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + regs_dma = (DMA_Base_Registers *)hdma->StreamBaseAddress; + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA channel */ + { + regs_bdma = (BDMA_Base_Registers *)hdma->StreamBaseAddress; + regs_bdma->IFCR = ((BDMA_IFCR_CGIF0) << (hdma->StreamIndex & 0x1FU)); + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT */ + /* disable the request gen overrun IT */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + return HAL_OK; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + BDMA_Base_Registers *regs_bdma; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + if(hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + return HAL_ERROR; + } + else + { + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Set Abort State */ + hdma->State = HAL_DMA_STATE_ABORT; + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + } + else /* BDMA channel */ + { + /* Disable DMA All Interrupts */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR &= ~(BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* disable the DMAMUX sync overrun IT */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear all flags */ + regs_bdma = (BDMA_Base_Registers *)hdma->StreamBaseAddress; + regs_bdma->IFCR = ((BDMA_IFCR_CGIF0) << (hdma->StreamIndex & 0x1FU)); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + } + + return HAL_OK; +} + +/** + * @brief Polling for transfer complete. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CompleteLevel: Specifies the DMA level complete. + * @note The polling mode is kept in this version for legacy. it is recommended to use the IT model instead. + * This model could be used for debug purpose. + * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode). + * @param Timeout: Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t cpltlevel_mask; + uint32_t tickstart = HAL_GetTick(); + + /* IT status register */ + __IO uint32_t *isr_reg; + /* IT clear flag register */ + __IO uint32_t *ifcr_reg; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* No transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Polling mode not supported in circular mode and double buffering mode */ + if ((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Transfer Complete flag */ + cpltlevel_mask = DMA_FLAG_TCIF0_4 << (hdma->StreamIndex & 0x1FU); + } + else + { + /* Half Transfer Complete flag */ + cpltlevel_mask = DMA_FLAG_HTIF0_4 << (hdma->StreamIndex & 0x1FU); + } + + isr_reg = &(((DMA_Base_Registers *)hdma->StreamBaseAddress)->ISR); + ifcr_reg = &(((DMA_Base_Registers *)hdma->StreamBaseAddress)->IFCR); + } + else /* BDMA channel */ + { + /* Polling mode not supported in circular mode */ + if ((((BDMA_Channel_TypeDef *)hdma->Instance)->CCR & BDMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Transfer Complete flag */ + cpltlevel_mask = BDMA_FLAG_TC0 << (hdma->StreamIndex & 0x1FU); + } + else + { + /* Half Transfer Complete flag */ + cpltlevel_mask = BDMA_FLAG_HT0 << (hdma->StreamIndex & 0x1FU); + } + + isr_reg = &(((BDMA_Base_Registers *)hdma->StreamBaseAddress)->ISR); + ifcr_reg = &(((BDMA_Base_Registers *)hdma->StreamBaseAddress)->IFCR); + } + + while(((*isr_reg) & cpltlevel_mask) == 0U) + { + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + if(((*isr_reg) & (DMA_FLAG_FEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_FE; + + /* Clear the FIFO error flag */ + (*ifcr_reg) = DMA_FLAG_FEIF0_4 << (hdma->StreamIndex & 0x1FU); + } + + if(((*isr_reg) & (DMA_FLAG_DMEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_DME; + + /* Clear the Direct Mode error flag */ + (*ifcr_reg) = DMA_FLAG_DMEIF0_4 << (hdma->StreamIndex & 0x1FU); + } + + if(((*isr_reg) & (DMA_FLAG_TEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TE; + + /* Clear the transfer error flag */ + (*ifcr_reg) = DMA_FLAG_TEIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + else /* BDMA channel */ + { + if(((*isr_reg) & (BDMA_FLAG_TE0 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + (*isr_reg) = ((BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + + /* Check for the Timeout (Not applicable in circular mode)*/ + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* if timeout then abort the current transfer */ + /* No need to check return value: as in this case we will return HAL_ERROR with HAL_DMA_ERROR_TIMEOUT error code */ + (void) HAL_DMA_Abort(hdma); + /* + Note that the Abort function will + - Clear the transfer error flags + - Unlock + - Set the State + */ + + return HAL_ERROR; + } + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Check for DMAMUX Request generator (if used) overrun status */ + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ + if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + } + } + + /* Check for DMAMUX Synchronization overrun */ + if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + } + } + } + + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Clear the half transfer and transfer complete flags */ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + (*ifcr_reg) = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA channel */ + { + (*ifcr_reg) = (BDMA_FLAG_TC0 << (hdma->StreamIndex & 0x1FU)); + } + + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + else /*CompleteLevel = HAL_DMA_HALF_TRANSFER*/ + { + /* Clear the half transfer and transfer complete flags */ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + (*ifcr_reg) = (DMA_FLAG_HTIF0_4) << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA channel */ + { + (*ifcr_reg) = (BDMA_FLAG_HT0 << (hdma->StreamIndex & 0x1FU)); + } + } + + return status; +} + +/** + * @brief Handles DMA interrupt request. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t tmpisr_dma, tmpisr_bdma; + uint32_t ccr_reg; + __IO uint32_t count = 0U; + uint32_t timeout = SystemCoreClock / 9600U; + + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs_dma = (DMA_Base_Registers *)hdma->StreamBaseAddress; + BDMA_Base_Registers *regs_bdma = (BDMA_Base_Registers *)hdma->StreamBaseAddress; + + tmpisr_dma = regs_dma->ISR; + tmpisr_bdma = regs_bdma->ISR; + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Transfer Error Interrupt management ***************************************/ + if ((tmpisr_dma & (DMA_FLAG_TEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != 0U) + { + /* Disable the transfer error interrupt */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_TE); + + /* Clear the transfer error flag */ + regs_dma->IFCR = DMA_FLAG_TEIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TE; + } + } + /* FIFO Error Interrupt management ******************************************/ + if ((tmpisr_dma & (DMA_FLAG_FEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != 0U) + { + /* Clear the FIFO error flag */ + regs_dma->IFCR = DMA_FLAG_FEIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_FE; + } + } + /* Direct Mode Error Interrupt management ***********************************/ + if ((tmpisr_dma & (DMA_FLAG_DMEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != 0U) + { + /* Clear the direct mode error flag */ + regs_dma->IFCR = DMA_FLAG_DMEIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_DME; + } + } + /* Half Transfer Complete Interrupt management ******************************/ + if ((tmpisr_dma & (DMA_FLAG_HTIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != 0U) + { + /* Clear the half transfer complete flag */ + regs_dma->IFCR = DMA_FLAG_HTIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Multi_Buffering mode enabled */ + if(((((DMA_Stream_TypeDef *)hdma->Instance)->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0U) + { + /* Current memory buffer used is Memory 0 */ + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CT) == 0U) + { + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferM1HalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferM1HalfCpltCallback(hdma); + } + } + } + else + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_HT); + } + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + } + } + /* Transfer Complete Interrupt management ***********************************/ + if ((tmpisr_dma & (DMA_FLAG_TCIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != 0U) + { + /* Clear the transfer complete flag */ + regs_dma->IFCR = DMA_FLAG_TCIF0_4 << (hdma->StreamIndex & 0x1FU); + + if(HAL_DMA_STATE_ABORT == hdma->State) + { + /* Disable all the transfer interrupts */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR &= ~(DMA_IT_FE); + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_HT); + } + + /* Clear all interrupt flags at correct offset within the register */ + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + return; + } + + if(((((DMA_Stream_TypeDef *)hdma->Instance)->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0U) + { + /* Current memory buffer used is Memory 0 */ + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CT) == 0U) + { + if(hdma->XferM1CpltCallback != NULL) + { + /* Transfer complete Callback for memory1 */ + hdma->XferM1CpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete Callback for memory0 */ + hdma->XferCpltCallback(hdma); + } + } + } + /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ + else + { + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CIRC) == 0U) + { + /* Disable the transfer complete interrupt */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + } + } + + /* manage error case */ + if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) + { + if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != 0U) + { + hdma->State = HAL_DMA_STATE_ABORT; + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + + do + { + if (++count > timeout) + { + break; + } + } + while((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_EN) != 0U); + + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_EN) != 0U) + { + /* Change the DMA state to error if DMA disable fails */ + hdma->State = HAL_DMA_STATE_ERROR; + } + else + { + /* Change the DMA state to Ready if DMA disable success */ + hdma->State = HAL_DMA_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } + else if(IS_BDMA_CHANNEL_INSTANCE(hdma->Instance) != 0U) /* BDMA instance(s) */ + { + ccr_reg = (((BDMA_Channel_TypeDef *)hdma->Instance)->CCR); + + /* Half Transfer Complete Interrupt management ******************************/ + if (((tmpisr_bdma & (BDMA_FLAG_HT0 << (hdma->StreamIndex & 0x1FU))) != 0U) && ((ccr_reg & BDMA_CCR_HTIE) != 0U)) + { + /* Clear the half transfer complete flag */ + regs_bdma->IFCR = (BDMA_ISR_HTIF0 << (hdma->StreamIndex & 0x1FU)); + + /* Disable the transfer complete interrupt if the DMA mode is Double Buffering */ + if((ccr_reg & BDMA_CCR_DBM) != 0U) + { + /* Current memory buffer used is Memory 0 */ + if((ccr_reg & BDMA_CCR_CT) == 0U) + { + if(hdma->XferM1HalfCpltCallback != NULL) + { + /* Half transfer Callback for Memory 1 */ + hdma->XferM1HalfCpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer Callback for Memory 0 */ + hdma->XferHalfCpltCallback(hdma); + } + } + } + else + { + if((ccr_reg & BDMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if (((tmpisr_bdma & (BDMA_FLAG_TC0 << (hdma->StreamIndex & 0x1FU))) != 0U) && ((ccr_reg & BDMA_CCR_TCIE) != 0U)) + { + /* Clear the transfer complete flag */ + regs_bdma->IFCR = (BDMA_ISR_TCIF0) << (hdma->StreamIndex & 0x1FU); + + /* Disable the transfer complete interrupt if the DMA mode is Double Buffering */ + if((ccr_reg & BDMA_CCR_DBM) != 0U) + { + /* Current memory buffer used is Memory 0 */ + if((ccr_reg & BDMA_CCR_CT) == 0U) + { + if(hdma->XferM1CpltCallback != NULL) + { + /* Transfer complete Callback for Memory 1 */ + hdma->XferM1CpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete Callback for Memory 0 */ + hdma->XferCpltCallback(hdma); + } + } + } + else + { + if((ccr_reg & BDMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt, if the DMA mode is not CIRCULAR */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + } + /* Transfer Error Interrupt management **************************************/ + else if (((tmpisr_bdma & (BDMA_FLAG_TE0 << (hdma->StreamIndex & 0x1FU))) != 0U) && ((ccr_reg & BDMA_CCR_TEIE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + regs_bdma->IFCR = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + } + else + { + /* Nothing To Do */ + } +} + +/** + * @brief Register callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID: User Callback identifier + * a DMA_HandleTypeDef structure as parameter. + * @param pCallback: pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_M1CPLT_CB_ID: + hdma->XferM1CpltCallback = pCallback; + break; + + case HAL_DMA_XFER_M1HALFCPLT_CB_ID: + hdma->XferM1HalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID: User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_M1CPLT_CB_ID: + hdma->XferM1CpltCallback = NULL; + break; + + case HAL_DMA_XFER_M1HALFCPLT_CB_ID: + hdma->XferM1HalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferM1CpltCallback = NULL; + hdma->XferM1HalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * +@verbatim + =============================================================================== + ##### State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Returns the DMA state. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + return hdma->State; +} + +/** + * @brief Return the DMA error code + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval None + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs_dma = (DMA_Base_Registers *)hdma->StreamBaseAddress; + BDMA_Base_Registers *regs_bdma = (BDMA_Base_Registers *)hdma->StreamBaseAddress; + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Clear all interrupt flags at correct offset within the register */ + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + + /* Clear DBM bit */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= (uint32_t)(~DMA_SxCR_DBM); + + /* Configure DMA Stream data length */ + ((DMA_Stream_TypeDef *)hdma->Instance)->NDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = DstAddress; + + /* Configure DMA Stream source address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Stream source address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = SrcAddress; + + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = DstAddress; + } + } + else if(IS_BDMA_CHANNEL_INSTANCE(hdma->Instance) != 0U) /* BDMA instance(s) */ + { + /* Clear all flags */ + regs_bdma->IFCR = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU); + + /* Configure DMA Channel data length */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CNDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Channel source address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = DstAddress; + } + } + else + { + /* Nothing To Do */ + } +} + +/** + * @brief Returns the DMA Stream base address depending on stream number + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval Stream base address + */ +static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) +{ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + uint32_t stream_number = (((uint32_t)((uint32_t*)hdma->Instance) & 0xFFU) - 16U) / 24U; + + /* lookup table for necessary bitshift of flags within status registers */ + static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U}; + hdma->StreamIndex = flagBitshiftOffset[stream_number & 0x7U]; + + if (stream_number > 3U) + { + /* return pointer to HISR and HIFCR */ + hdma->StreamBaseAddress = (((uint32_t)((uint32_t*)hdma->Instance) & (uint32_t)(~0x3FFU)) + 4U); + } + else + { + /* return pointer to LISR and LIFCR */ + hdma->StreamBaseAddress = ((uint32_t)((uint32_t*)hdma->Instance) & (uint32_t)(~0x3FFU)); + } + } + else /* BDMA instance(s) */ + { + /* return pointer to ISR and IFCR */ + hdma->StreamBaseAddress = ((uint32_t)((uint32_t*)hdma->Instance) & (uint32_t)(~0xFFU)); + } + + return hdma->StreamBaseAddress; +} + +/** + * @brief Check compatibility between FIFO threshold level and size of the memory burst + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Memory Data size equal to Byte */ + if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE) + { + switch (hdma->Init.FIFOThreshold) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + + case DMA_FIFO_THRESHOLD_HALFFULL: + if (hdma->Init.MemBurst == DMA_MBURST_INC16) + { + status = HAL_ERROR; + } + break; + + case DMA_FIFO_THRESHOLD_FULL: + break; + + default: + break; + } + } + + /* Memory Data size equal to Half-Word */ + else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + switch (hdma->Init.FIFOThreshold) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + status = HAL_ERROR; + break; + + case DMA_FIFO_THRESHOLD_HALFFULL: + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + + case DMA_FIFO_THRESHOLD_FULL: + if (hdma->Init.MemBurst == DMA_MBURST_INC16) + { + status = HAL_ERROR; + } + break; + + default: + break; + } + } + + /* Memory Data size equal to Word */ + else + { + switch (hdma->Init.FIFOThreshold) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_HALFFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + status = HAL_ERROR; + break; + + case DMA_FIFO_THRESHOLD_FULL: + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + + default: + break; + } + } + + return status; +} + +/** + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on stream number + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t stream_number; + uint32_t stream_baseaddress = (uint32_t)((uint32_t*)hdma->Instance); + + if(IS_BDMA_CHANNEL_DMAMUX_INSTANCE(hdma->Instance) != 0U) + { + /* BDMA Channels are connected to DMAMUX2 channels */ + stream_number = (((uint32_t)((uint32_t*)hdma->Instance) & 0xFFU) - 8U) / 20U; + hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)((uint32_t)(((uint32_t)DMAMUX2_Channel0) + (stream_number * 4U))); + hdma->DMAmuxChannelStatus = DMAMUX2_ChannelStatus; + hdma->DMAmuxChannelStatusMask = 1UL << (stream_number & 0x1FU); + } + else + { + /* DMA1/DMA2 Streams are connected to DMAMUX1 channels */ + stream_number = (((uint32_t)((uint32_t*)hdma->Instance) & 0xFFU) - 16U) / 24U; + + if((stream_baseaddress <= ((uint32_t)DMA2_Stream7) ) && \ + (stream_baseaddress >= ((uint32_t)DMA2_Stream0))) + { + stream_number += 8U; + } + hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_Channel0) + (stream_number * 4U))); + hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; + hdma->DMAmuxChannelStatusMask = 1UL << (stream_number & 0x1FU); + } +} + +/** + * @brief Updates the DMA handle with the DMAMUX request generator params + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; + + if((request >= DMA_REQUEST_GENERATOR0) && (request <= DMA_REQUEST_GENERATOR7)) + { + if(IS_BDMA_CHANNEL_DMAMUX_INSTANCE(hdma->Instance) != 0U) + { + /* BDMA Channels are connected to DMAMUX2 request generator blocks */ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX2_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX2_RequestGenStatus; + } + else + { + /* DMA1 and DMA2 Streams use DMAMUX1 request generator blocks */ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; + } + + hdma->DMAmuxRequestGenStatusMask = 1UL << (request - 1U); + } +} + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c new file mode 100644 index 0000000..a134b4e --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c @@ -0,0 +1,712 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + (+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function + for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode. + + (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + + (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler or DMAMUX2_OVR_IRQHandler . + As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMA_MUX_IRQHandler should be + called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project + (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) + + -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. + -@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default. + -@- In Multi (Double) buffer mode, it is possible to update the base address for + the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled. + -@- Multi (Double) buffer mode is possible with DMA and BDMA instances. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup DMAEx_Private_Functions + * @{ + */ + +static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + + +/** @addtogroup DMAEx_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and + Start MultiBuffer DMA transfer + (+) Configure the source, destination address and data length and + Start MultiBuffer DMA transfer with interrupt + (+) Change on the fly the memory0 or memory1 address. + (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + (+) Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + (+) Handle DMAMUX interrupts using HAL_DMAEx_MUX_IRQHandler : should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler or DMAMUX2_OVR_IRQHandler + +@endverbatim + * @{ + */ + + +/** + * @brief Starts the multi_buffer DMA Transfer. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + __IO uint32_t *ifcRegister_Base; /* DMA Stream Interrupt Clear register */ + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Memory-to-memory transfer not supported in double buffering mode */ + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + } + else + { + /* Process Locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Enable the Double buffer mode */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_SxCR_DBM; + + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = SecondMemAddress; + + /* Calculate the interrupt clear flag register (IFCR) base address */ + ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 8U)); + + /* Clear all flags */ + *ifcRegister_Base = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA instance(s) */ + { + /* Enable the Double buffer mode */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= (BDMA_CCR_DBM | BDMA_CCR_CIRC); + + /* Configure DMA Stream destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = SecondMemAddress; + + /* Calculate the interrupt clear flag register (IFCR) base address */ + ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 4U)); + + /* Clear all flags */ + *ifcRegister_Base = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU); + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Configure the source, destination address and the data length */ + DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + /* Enable the peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Starts the multi_buffer DMA Transfer with interrupt enabled. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + __IO uint32_t *ifcRegister_Base; /* DMA Stream Interrupt Clear register */ + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Memory-to-memory transfer not supported in double buffering mode */ + if(hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Enable the Double buffer mode */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_SxCR_DBM; + + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = SecondMemAddress; + + /* Calculate the interrupt clear flag register (IFCR) base address */ + ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 8U)); + + /* Clear all flags */ + *ifcRegister_Base = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA instance(s) */ + { + /* Enable the Double buffer mode */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= (BDMA_CCR_DBM | BDMA_CCR_CIRC); + + /* Configure DMA Stream destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = SecondMemAddress; + + /* Calculate the interrupt clear flag register (IFCR) base address */ + ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 4U)); + + /* Clear all flags */ + *ifcRegister_Base = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU); + } + + /* Configure the source, destination address and the data length */ + DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Enable Common interrupts*/ + MODIFY_REG(((DMA_Stream_TypeDef *)hdma->Instance)->CR, (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME | DMA_IT_HT), (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME)); + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR |= DMA_IT_FE; + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + /*Enable Half Transfer IT if corresponding Callback is set*/ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_IT_HT; + } + } + else /* BDMA instance(s) */ + { + /* Enable Common interrupts*/ + MODIFY_REG(((BDMA_Channel_TypeDef *)hdma->Instance)->CCR, (BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE), (BDMA_CCR_TCIE | BDMA_CCR_TEIE)); + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + /*Enable Half Transfer IT if corresponding Callback is set*/ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= BDMA_CCR_HTIE; + } + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Check if DMAMUX Synchronization is enabled*/ + if((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + } + + /* Enable the peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + status = HAL_ERROR; + } + return status; +} + +/** + * @brief Change the memory0 or memory1 address on the fly. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param Address: The new address + * @param memory: the memory to be changed, This parameter can be one of + * the following values: + * MEMORY0 / + * MEMORY1 + * @note The MEMORY0 address can be changed only when the current transfer use + * MEMORY1 and the MEMORY1 address can be changed only when the current + * transfer use MEMORY0. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory) +{ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + if(memory == MEMORY0) + { + /* change the memory0 address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = Address; + } + else + { + /* change the memory1 address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = Address; + } + } + else /* BDMA instance(s) */ + { + if(memory == MEMORY0) + { + /* change the memory0 address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = Address; + } + else + { + /* change the memory1 address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = Address; + } + } + + return HAL_OK; +} + +/** + * @brief Configure the DMAMUX synchronization parameters for a given DMA stream (instance). + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) +{ + uint32_t syncSignalID = 0; + uint32_t syncPolarity = 0; + + /* Check the parameters */ + assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); + assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); + assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); + + if(pSyncConfig->SyncEnable == ENABLE) + { + assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig->SyncPolarity)); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + assert_param(IS_DMA_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + } + else + { + assert_param(IS_BDMA_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + } + syncSignalID = pSyncConfig->SyncSignalID; + syncPolarity = pSyncConfig->SyncPolarity; + } + + /*Check if the DMA state is ready */ + if(hdma->State == HAL_DMA_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Disable the synchronization and event generation before applying a new config */ + CLEAR_BIT(hdma->DMAmuxChannel->CCR,(DMAMUX_CxCR_SE | DMAMUX_CxCR_EGE)); + + /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ + MODIFY_REG( hdma->DMAmuxChannel->CCR, \ + (~DMAMUX_CxCR_DMAREQ_ID) , \ + (syncSignalID << DMAMUX_CxCR_SYNC_ID_Pos) | \ + ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \ + syncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \ + ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos)); + + /* Process Locked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMAMUX request generator block used by the given DMA stream (instance). + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef : + * contains the request generator parameters. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) +{ + HAL_StatusTypeDef status; + HAL_DMA_StateTypeDef temp_state = hdma->State; + + /* Check the parameters */ + assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance)); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + assert_param(IS_DMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + } + else + { + assert_param(IS_BDMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + } + + + assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); + assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if(hdma->DMAmuxRequestGen == 0U) + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + + /* error status */ + status = HAL_ERROR; + } + else if(((hdma->DMAmuxRequestGen->RGCR & DMAMUX_RGxCR_GE) == 0U) && (temp_state == HAL_DMA_STATE_READY)) + { + /* RequestGenerator must be disable prior to the configuration i.e GE bit is 0 */ + + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the request generator new parameters */ + hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ + ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos)| \ + pRequestGeneratorConfig->Polarity; + /* Process Locked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Enable the DMAMUX request generator block used by the given DMA stream (instance). + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block */ + if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0U)) + { + /* Enable the request generator*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the DMAMUX request generator block used by the given DMA stream (instance). + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block */ + if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0U)) + { + /* Disable the request generator*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handles DMAMUX interrupt request. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) +{ + /* Check for DMAMUX Synchronization overrun */ + if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Disable the synchro overrun interrupt */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + + if(hdma->DMAmuxRequestGen != 0) + { + /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ + if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } +} + + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMAEx_Private_Functions + * @{ + */ + +/** + * @brief Set the DMA Transfer parameter. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Configure DMA Stream data length */ + ((DMA_Stream_TypeDef *)hdma->Instance)->NDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = DstAddress; + + /* Configure DMA Stream source address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Stream source address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = SrcAddress; + + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = DstAddress; + } + } + else /* BDMA instance(s) */ + { + /* Configure DMA Stream data length */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CNDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Stream destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = DstAddress; + + /* Configure DMA Stream source address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Stream source address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = SrcAddress; + + /* Configure DMA Stream destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = DstAddress; + } + } +} + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dsi.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dsi.c new file mode 100644 index 0000000..b2ae620 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dsi.c @@ -0,0 +1,3172 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dsi.c + * @author MCD Application Team + * @brief DSI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the DSI peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DSI HAL driver can be used as follows: + + (#) Declare a DSI_HandleTypeDef handle structure, for example: DSI_HandleTypeDef hdsi; + + (#) Initialize the DSI low level resources by implementing the HAL_DSI_MspInit() API: + (##) Enable the DSI interface clock + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the DSI interrupt priority + (+++) Enable the NVIC DSI IRQ Channel + + (#) Initialize the DSI Host peripheral, the required PLL parameters, number of lances and + TX Escape clock divider by calling the HAL_DSI_Init() API which calls HAL_DSI_MspInit(). + + *** Configuration *** + ========================= + [..] + (#) Use HAL_DSI_ConfigAdaptedCommandMode() function to configure the DSI host in adapted + command mode. + + (#) When operating in video mode , use HAL_DSI_ConfigVideoMode() to configure the DSI host. + + (#) Function HAL_DSI_ConfigCommand() is used to configure the DSI commands behavior in low power mode. + + (#) To configure the DSI PHY timings parameters, use function HAL_DSI_ConfigPhyTimer(). + + (#) The DSI Host can be started/stopped using respectively functions HAL_DSI_Start() and HAL_DSI_Stop(). + Functions HAL_DSI_ShortWrite(), HAL_DSI_LongWrite() and HAL_DSI_Read() allows respectively + to write DSI short packets, long packets and to read DSI packets. + + (#) The DSI Host Offers two Low power modes : + (++) Low Power Mode on data lanes only: Only DSI data lanes are shut down. + It is possible to enter/exit from this mode using respectively functions HAL_DSI_EnterULPMData() + and HAL_DSI_ExitULPMData() + + (++) Low Power Mode on data and clock lanes : All DSI lanes are shut down including data and clock lanes. + It is possible to enter/exit from this mode using respectively functions HAL_DSI_EnterULPM() + and HAL_DSI_ExitULPM() + + (#) To control DSI state you can use the following function: HAL_DSI_GetState() + + *** Error management *** + ======================== + [..] + (#) User can select the DSI errors to be reported/monitored using function HAL_DSI_ConfigErrorMonitor() + When an error occurs, the callback HAL_DSI_ErrorCallback() is asserted and then user can retrieve + the error code by calling function HAL_DSI_GetError() + + *** DSI HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DSI HAL driver. + + (+) __HAL_DSI_ENABLE: Enable the DSI Host. + (+) __HAL_DSI_DISABLE: Disable the DSI Host. + (+) __HAL_DSI_WRAPPER_ENABLE: Enables the DSI wrapper. + (+) __HAL_DSI_WRAPPER_DISABLE: Disable the DSI wrapper. + (+) __HAL_DSI_PLL_ENABLE: Enables the DSI PLL. + (+) __HAL_DSI_PLL_DISABLE: Disables the DSI PLL. + (+) __HAL_DSI_REG_ENABLE: Enables the DSI regulator. + (+) __HAL_DSI_REG_DISABLE: Disables the DSI regulator. + (+) __HAL_DSI_GET_FLAG: Get the DSI pending flags. + (+) __HAL_DSI_CLEAR_FLAG: Clears the DSI pending flags. + (+) __HAL_DSI_ENABLE_IT: Enables the specified DSI interrupts. + (+) __HAL_DSI_DISABLE_IT: Disables the specified DSI interrupts. + (+) __HAL_DSI_GET_IT_SOURCE: Checks whether the specified DSI interrupt source is enabled or not. + + [..] + (@) You can refer to the DSI HAL driver header file for more useful macros + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_DSI_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_DSI_RegisterCallback() to register a callback. + + [..] + Function HAL_DSI_RegisterCallback() allows to register following callbacks: + (+) TearingEffectCallback : DSI Tearing Effect Callback. + (+) EndOfRefreshCallback : DSI End Of Refresh Callback. + (+) ErrorCallback : DSI Error Callback + (+) MspInitCallback : DSI MspInit. + (+) MspDeInitCallback : DSI MspDeInit. + [..] + This function takes as parameters the HAL peripheral handle, the callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_DSI_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_DSI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the callback ID. + [..] + This function allows to reset following callbacks: + (+) TearingEffectCallback : DSI Tearing Effect Callback. + (+) EndOfRefreshCallback : DSI End Of Refresh Callback. + (+) ErrorCallback : DSI Error Callback + (+) MspInitCallback : DSI MspInit. + (+) MspDeInitCallback : DSI MspDeInit. + + [..] + By default, after the HAL_DSI_Init and when the state is HAL_DSI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_DSI_TearingEffectCallback(), HAL_DSI_EndOfRefreshCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak (overridden) functions in the HAL_DSI_Init() + and HAL_DSI_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_DSI_Init() and HAL_DSI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_DSI_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_DSI_STATE_READY or HAL_DSI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_DSI_RegisterCallback() before calling HAL_DSI_DeInit() + or HAL_DSI_Init() function. + + [..] + When The compilation define USE_HAL_DSI_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +#ifdef HAL_DSI_MODULE_ENABLED + +#if defined(DSI) + +/** @addtogroup DSI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @addtogroup DSI_Private_Constants + * @{ + */ +#define DSI_TIMEOUT_VALUE ((uint32_t)1000U) /* 1s */ + +#define DSI_ERROR_ACK_MASK (DSI_ISR0_AE0 | DSI_ISR0_AE1 | DSI_ISR0_AE2 | DSI_ISR0_AE3 | \ + DSI_ISR0_AE4 | DSI_ISR0_AE5 | DSI_ISR0_AE6 | DSI_ISR0_AE7 | \ + DSI_ISR0_AE8 | DSI_ISR0_AE9 | DSI_ISR0_AE10 | DSI_ISR0_AE11 | \ + DSI_ISR0_AE12 | DSI_ISR0_AE13 | DSI_ISR0_AE14 | DSI_ISR0_AE15) +#define DSI_ERROR_PHY_MASK (DSI_ISR0_PE0 | DSI_ISR0_PE1 | DSI_ISR0_PE2 | DSI_ISR0_PE3 | DSI_ISR0_PE4) +#define DSI_ERROR_TX_MASK DSI_ISR1_TOHSTX +#define DSI_ERROR_RX_MASK DSI_ISR1_TOLPRX +#define DSI_ERROR_ECC_MASK (DSI_ISR1_ECCSE | DSI_ISR1_ECCME) +#define DSI_ERROR_CRC_MASK DSI_ISR1_CRCE +#define DSI_ERROR_PSE_MASK DSI_ISR1_PSE +#define DSI_ERROR_EOT_MASK DSI_ISR1_EOTPE +#define DSI_ERROR_OVF_MASK DSI_ISR1_LPWRE +#define DSI_ERROR_GEN_MASK (DSI_ISR1_GCWRE | DSI_ISR1_GPWRE | DSI_ISR1_GPTXE | DSI_ISR1_GPRDE | DSI_ISR1_GPRXE) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx, uint32_t ChannelID, uint32_t DataType, uint32_t Data0, + uint32_t Data1); + +static HAL_StatusTypeDef DSI_ShortWrite(DSI_HandleTypeDef *hdsi, + uint32_t ChannelID, + uint32_t Mode, + uint32_t Param1, + uint32_t Param2); +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DSI_Private_Functions DSI Private Functions + * @{ + */ +/** + * @brief Generic DSI packet header configuration + * @param DSIx Pointer to DSI register base + * @param ChannelID Virtual channel ID of the header packet + * @param DataType Packet data type of the header packet + * This parameter can be any value of : + * @arg DSI_SHORT_WRITE_PKT_Data_Type + * @arg DSI_LONG_WRITE_PKT_Data_Type + * @arg DSI_SHORT_READ_PKT_Data_Type + * @arg DSI_MAX_RETURN_PKT_SIZE + * @param Data0 Word count LSB + * @param Data1 Word count MSB + * @retval None + */ +static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx, + uint32_t ChannelID, + uint32_t DataType, + uint32_t Data0, + uint32_t Data1) +{ + /* Update the DSI packet header with new information */ + DSIx->GHCR = (DataType | (ChannelID << 6U) | (Data0 << 8U) | (Data1 << 16U)); +} + +/** + * @brief write short DCS or short Generic command + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param ChannelID Virtual channel ID. + * @param Mode DSI short packet data type. + * This parameter can be any value of @arg DSI_SHORT_WRITE_PKT_Data_Type. + * @param Param1 DSC command or first generic parameter. + * This parameter can be any value of @arg DSI_DCS_Command or a + * generic command code. + * @param Param2 DSC parameter or second generic parameter. + * @retval HAL status + */ +static HAL_StatusTypeDef DSI_ShortWrite(DSI_HandleTypeDef *hdsi, + uint32_t ChannelID, + uint32_t Mode, + uint32_t Param1, + uint32_t Param2) +{ + uint32_t tickstart; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for Command FIFO Empty */ + while ((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the packet to send a short DCS command with 0 or 1 parameter */ + /* Update the DSI packet header with new information */ + hdsi->Instance->GHCR = (Mode | (ChannelID << 6U) | (Param1 << 8U) | (Param2 << 16U)); + + return HAL_OK; +} + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DSI_Exported_Functions + * @{ + */ + +/** @defgroup DSI_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the DSI + (+) De-initialize the DSI + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the DSI according to the specified + * parameters in the DSI_InitTypeDef and create the associated handle. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param PLLInit pointer to a DSI_PLLInitTypeDef structure that contains + * the PLL Clock structure definition for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_Init(DSI_HandleTypeDef *hdsi, DSI_PLLInitTypeDef *PLLInit) +{ + uint32_t tickstart; + uint32_t unitIntervalx4; + uint32_t tempIDF; + + /* Check the DSI handle allocation */ + if (hdsi == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_DSI_PLL_NDIV(PLLInit->PLLNDIV)); + assert_param(IS_DSI_PLL_IDF(PLLInit->PLLIDF)); + assert_param(IS_DSI_PLL_ODF(PLLInit->PLLODF)); + assert_param(IS_DSI_AUTO_CLKLANE_CONTROL(hdsi->Init.AutomaticClockLaneControl)); + assert_param(IS_DSI_NUMBER_OF_LANES(hdsi->Init.NumberOfLanes)); + +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) + if (hdsi->State == HAL_DSI_STATE_RESET) + { + /* Reset the DSI callback to the legacy weak callbacks */ + hdsi->TearingEffectCallback = HAL_DSI_TearingEffectCallback; /* Legacy weak TearingEffectCallback */ + hdsi->EndOfRefreshCallback = HAL_DSI_EndOfRefreshCallback; /* Legacy weak EndOfRefreshCallback */ + hdsi->ErrorCallback = HAL_DSI_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hdsi->MspInitCallback == NULL) + { + hdsi->MspInitCallback = HAL_DSI_MspInit; + } + /* Initialize the low level hardware */ + hdsi->MspInitCallback(hdsi); + } +#else + if (hdsi->State == HAL_DSI_STATE_RESET) + { + /* Initialize the low level hardware */ + HAL_DSI_MspInit(hdsi); + } +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ + + /* Change DSI peripheral state */ + hdsi->State = HAL_DSI_STATE_BUSY; + + /**************** Turn on the regulator and enable the DSI PLL ****************/ + + /* Enable the regulator */ + __HAL_DSI_REG_ENABLE(hdsi); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until the regulator is ready */ + while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_RRS) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set the PLL division factors */ + hdsi->Instance->WRPCR &= ~(DSI_WRPCR_PLL_NDIV | DSI_WRPCR_PLL_IDF | DSI_WRPCR_PLL_ODF); + hdsi->Instance->WRPCR |= (((PLLInit->PLLNDIV) << DSI_WRPCR_PLL_NDIV_Pos) | \ + ((PLLInit->PLLIDF) << DSI_WRPCR_PLL_IDF_Pos) | \ + ((PLLInit->PLLODF) << DSI_WRPCR_PLL_ODF_Pos)); + + /* Enable the DSI PLL */ + __HAL_DSI_PLL_ENABLE(hdsi); + + /* Requires min of 400us delay before reading the PLLLS flag */ + /* 1ms delay is inserted that is the minimum HAL delay granularity */ + HAL_Delay(1); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for the lock of the PLL */ + while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + __HAL_DSI_ENABLE(hdsi); + + /************************ Set the DSI clock parameters ************************/ + /* Set the TX escape clock division factor */ + hdsi->Instance->CCR &= ~DSI_CCR_TXECKDIV; + hdsi->Instance->CCR |= hdsi->Init.TXEscapeCkdiv; + + /*************************** Set the PHY parameters ***************************/ + /* D-PHY clock and digital enable*/ + hdsi->Instance->PCTLR |= DSI_PCTLR_DEN; + + hdsi->Instance->PCTLR |= DSI_PCTLR_CKE; + + + /* Configure the number of active data lanes */ + hdsi->Instance->PCONFR &= ~DSI_PCONFR_NL; + hdsi->Instance->PCONFR |= hdsi->Init.NumberOfLanes; + + /* Get tick */ + tickstart = HAL_GetTick(); + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + while ((hdsi->Instance->PSR & (DSI_PSR_PSS0 | DSI_PSR_PSSC)) != (DSI_PSR_PSS0 | DSI_PSR_PSSC)) + { + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else + { + while ((hdsi->Instance->PSR & (DSI_PSR_PSS0 | DSI_PSR_PSS1 | DSI_PSR_PSSC)) != (DSI_PSR_PSS0 | \ + DSI_PSR_PSS1 | DSI_PSR_PSSC)) + { + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + + /* Calculate the bit period in high-speed mode in unit of 0.25 ns (UIX4) */ + /* The equation is : UIX4 = IntegerPart( (1000/F_PHY_Mhz) * 4 ) */ + /* Where : F_PHY_Mhz = (NDIV * HSE_Mhz) / (IDF * ODF) */ + tempIDF = (PLLInit->PLLIDF > 0U) ? PLLInit->PLLIDF : 1U; + unitIntervalx4 = (4000000U * tempIDF * ((1UL << (0x3U & PLLInit->PLLODF)))) / ((HSE_VALUE / 1000U) * PLLInit->PLLNDIV); + + /* Set the bit period in high-speed mode */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_UIX4; + hdsi->Instance->WPCR[0U] |= unitIntervalx4; + + /****************************** Error management *****************************/ + + /* Disable all error interrupts and reset the Error Mask */ + hdsi->Instance->IER[0U] = 0U; + hdsi->Instance->IER[1U] = 0U; + hdsi->ErrorMsk = 0U; + + __HAL_DSI_DISABLE(hdsi); + + /* Clock lane configuration */ + hdsi->Instance->CLCR &= ~(DSI_CLCR_DPCC | DSI_CLCR_ACR); + hdsi->Instance->CLCR |= (DSI_CLCR_DPCC | hdsi->Init.AutomaticClockLaneControl); + + /* Initialize the error code */ + hdsi->ErrorCode = HAL_DSI_ERROR_NONE; + + /* Initialize the DSI state*/ + hdsi->State = HAL_DSI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-initializes the DSI peripheral registers to their default reset + * values. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_DeInit(DSI_HandleTypeDef *hdsi) +{ + /* Check the DSI handle allocation */ + if (hdsi == NULL) + { + return HAL_ERROR; + } + + /* Change DSI peripheral state */ + hdsi->State = HAL_DSI_STATE_BUSY; + + /* Disable the DSI wrapper */ + __HAL_DSI_WRAPPER_DISABLE(hdsi); + + /* Disable the DSI host */ + __HAL_DSI_DISABLE(hdsi); + + /* D-PHY clock and digital disable */ + hdsi->Instance->PCTLR &= ~(DSI_PCTLR_CKE | DSI_PCTLR_DEN); + + /* Turn off the DSI PLL */ + __HAL_DSI_PLL_DISABLE(hdsi); + + /* Disable the regulator */ + __HAL_DSI_REG_DISABLE(hdsi); + +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) + if (hdsi->MspDeInitCallback == NULL) + { + hdsi->MspDeInitCallback = HAL_DSI_MspDeInit; + } + /* DeInit the low level hardware */ + hdsi->MspDeInitCallback(hdsi); +#else + /* DeInit the low level hardware */ + HAL_DSI_MspDeInit(hdsi); +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ + + /* Initialize the error code */ + hdsi->ErrorCode = HAL_DSI_ERROR_NONE; + + /* Initialize the DSI state*/ + hdsi->State = HAL_DSI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Enable the error monitor flags + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param ActiveErrors indicates which error interrupts will be enabled. + * This parameter can be any combination of @arg DSI_Error_Data_Type. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ConfigErrorMonitor(DSI_HandleTypeDef *hdsi, uint32_t ActiveErrors) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + hdsi->Instance->IER[0U] = 0U; + hdsi->Instance->IER[1U] = 0U; + + /* Store active errors to the handle */ + hdsi->ErrorMsk = ActiveErrors; + + if ((ActiveErrors & HAL_DSI_ERROR_ACK) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[0U] |= DSI_ERROR_ACK_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_PHY) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[0U] |= DSI_ERROR_PHY_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_TX) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[1U] |= DSI_ERROR_TX_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_RX) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[1U] |= DSI_ERROR_RX_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_ECC) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[1U] |= DSI_ERROR_ECC_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_CRC) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[1U] |= DSI_ERROR_CRC_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_PSE) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[1U] |= DSI_ERROR_PSE_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_EOT) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[1U] |= DSI_ERROR_EOT_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_OVF) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[1U] |= DSI_ERROR_OVF_MASK; + } + + if ((ActiveErrors & HAL_DSI_ERROR_GEN) != 0U) + { + /* Enable the interrupt generation on selected errors */ + hdsi->Instance->IER[1U] |= DSI_ERROR_GEN_MASK; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Initializes the DSI MSP. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval None + */ +__weak void HAL_DSI_MspInit(DSI_HandleTypeDef *hdsi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdsi); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DSI_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-initializes the DSI MSP. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval None + */ +__weak void HAL_DSI_MspDeInit(DSI_HandleTypeDef *hdsi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdsi); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DSI_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User DSI Callback + * To be used instead of the weak predefined callback + * @param hdsi dsi handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg HAL_DSI_TEARING_EFFECT_CB_ID Tearing Effect Callback ID + * @arg HAL_DSI_ENDOF_REFRESH_CB_ID End Of Refresh Callback ID + * @arg HAL_DSI_ERROR_CB_ID Error Callback ID + * @arg HAL_DSI_MSPINIT_CB_ID MspInit callback ID + * @arg HAL_DSI_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_DSI_RegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID, + pDSI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hdsi); + + if (hdsi->State == HAL_DSI_STATE_READY) + { + switch (CallbackID) + { + case HAL_DSI_TEARING_EFFECT_CB_ID : + hdsi->TearingEffectCallback = pCallback; + break; + + case HAL_DSI_ENDOF_REFRESH_CB_ID : + hdsi->EndOfRefreshCallback = pCallback; + break; + + case HAL_DSI_ERROR_CB_ID : + hdsi->ErrorCallback = pCallback; + break; + + case HAL_DSI_MSPINIT_CB_ID : + hdsi->MspInitCallback = pCallback; + break; + + case HAL_DSI_MSPDEINIT_CB_ID : + hdsi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hdsi->State == HAL_DSI_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DSI_MSPINIT_CB_ID : + hdsi->MspInitCallback = pCallback; + break; + + case HAL_DSI_MSPDEINIT_CB_ID : + hdsi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdsi); + + return status; +} + +/** + * @brief Unregister a DSI Callback + * DSI callback is redirected to the weak predefined callback + * @param hdsi dsi handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg HAL_DSI_TEARING_EFFECT_CB_ID Tearing Effect Callback ID + * @arg HAL_DSI_ENDOF_REFRESH_CB_ID End Of Refresh Callback ID + * @arg HAL_DSI_ERROR_CB_ID Error Callback ID + * @arg HAL_DSI_MSPINIT_CB_ID MspInit callback ID + * @arg HAL_DSI_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_DSI_UnRegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdsi); + + if (hdsi->State == HAL_DSI_STATE_READY) + { + switch (CallbackID) + { + case HAL_DSI_TEARING_EFFECT_CB_ID : + hdsi->TearingEffectCallback = HAL_DSI_TearingEffectCallback; /* Legacy weak TearingEffectCallback */ + break; + + case HAL_DSI_ENDOF_REFRESH_CB_ID : + hdsi->EndOfRefreshCallback = HAL_DSI_EndOfRefreshCallback; /* Legacy weak EndOfRefreshCallback */ + break; + + case HAL_DSI_ERROR_CB_ID : + hdsi->ErrorCallback = HAL_DSI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_DSI_MSPINIT_CB_ID : + hdsi->MspInitCallback = HAL_DSI_MspInit; /* Legacy weak MspInit Callback */ + break; + + case HAL_DSI_MSPDEINIT_CB_ID : + hdsi->MspDeInitCallback = HAL_DSI_MspDeInit; /* Legacy weak MspDeInit Callback */ + break; + + default : + /* Update the error code */ + hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hdsi->State == HAL_DSI_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DSI_MSPINIT_CB_ID : + hdsi->MspInitCallback = HAL_DSI_MspInit; /* Legacy weak MspInit Callback */ + break; + + case HAL_DSI_MSPDEINIT_CB_ID : + hdsi->MspDeInitCallback = HAL_DSI_MspDeInit; /* Legacy weak MspDeInit Callback */ + break; + + default : + /* Update the error code */ + hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdsi); + + return status; +} +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DSI_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides function allowing to: + (+) Handle DSI interrupt request + +@endverbatim + * @{ + */ +/** + * @brief Handles DSI interrupt request. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +void HAL_DSI_IRQHandler(DSI_HandleTypeDef *hdsi) +{ + uint32_t ErrorStatus0; + uint32_t ErrorStatus1; + + /* Tearing Effect Interrupt management ***************************************/ + if (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_TE) != 0U) + { + if (__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_TE) != 0U) + { + /* Clear the Tearing Effect Interrupt Flag */ + __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_TE); + + /* Tearing Effect Callback */ +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) + /*Call registered Tearing Effect callback */ + hdsi->TearingEffectCallback(hdsi); +#else + /*Call legacy Tearing Effect callback*/ + HAL_DSI_TearingEffectCallback(hdsi); +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ + } + } + + /* End of Refresh Interrupt management ***************************************/ + if (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_ER) != 0U) + { + if (__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_ER) != 0U) + { + /* Clear the End of Refresh Interrupt Flag */ + __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_ER); + + /* End of Refresh Callback */ +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) + /*Call registered End of refresh callback */ + hdsi->EndOfRefreshCallback(hdsi); +#else + /*Call Legacy End of refresh callback */ + HAL_DSI_EndOfRefreshCallback(hdsi); +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ + } + } + + /* Error Interrupts management ***********************************************/ + if (hdsi->ErrorMsk != 0U) + { + ErrorStatus0 = hdsi->Instance->ISR[0U]; + ErrorStatus0 &= hdsi->Instance->IER[0U]; + ErrorStatus1 = hdsi->Instance->ISR[1U]; + ErrorStatus1 &= hdsi->Instance->IER[1U]; + + if ((ErrorStatus0 & DSI_ERROR_ACK_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_ACK; + } + + if ((ErrorStatus0 & DSI_ERROR_PHY_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_PHY; + } + + if ((ErrorStatus1 & DSI_ERROR_TX_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_TX; + } + + if ((ErrorStatus1 & DSI_ERROR_RX_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_RX; + } + + if ((ErrorStatus1 & DSI_ERROR_ECC_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_ECC; + } + + if ((ErrorStatus1 & DSI_ERROR_CRC_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_CRC; + } + + if ((ErrorStatus1 & DSI_ERROR_PSE_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_PSE; + } + + if ((ErrorStatus1 & DSI_ERROR_EOT_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_EOT; + } + + if ((ErrorStatus1 & DSI_ERROR_OVF_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_OVF; + } + + if ((ErrorStatus1 & DSI_ERROR_GEN_MASK) != 0U) + { + hdsi->ErrorCode |= HAL_DSI_ERROR_GEN; + } + + /* Check only selected errors */ + if (hdsi->ErrorCode != HAL_DSI_ERROR_NONE) + { + /* DSI error interrupt callback */ +#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1) + /*Call registered Error callback */ + hdsi->ErrorCallback(hdsi); +#else + /*Call Legacy Error callback */ + HAL_DSI_ErrorCallback(hdsi); +#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Tearing Effect DSI callback. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval None + */ +__weak void HAL_DSI_TearingEffectCallback(DSI_HandleTypeDef *hdsi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdsi); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DSI_TearingEffectCallback could be implemented in the user file + */ +} + +/** + * @brief End of Refresh DSI callback. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval None + */ +__weak void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdsi); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DSI_EndOfRefreshCallback could be implemented in the user file + */ +} + +/** + * @brief Operation Error DSI callback. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval None + */ +__weak void HAL_DSI_ErrorCallback(DSI_HandleTypeDef *hdsi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdsi); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_DSI_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DSI_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the Generic interface read-back Virtual Channel ID + (+) Select video mode and configure the corresponding parameters + (+) Configure command transmission mode: High-speed or Low-power + (+) Configure the flow control + (+) Configure the DSI PHY timer + (+) Configure the DSI HOST timeout + (+) Configure the DSI HOST timeout + (+) Start/Stop the DSI module + (+) Refresh the display in command mode + (+) Controls the display color mode in Video mode + (+) Control the display shutdown in Video mode + (+) write short DCS or short Generic command + (+) write long DCS or long Generic command + (+) Read command (DCS or generic) + (+) Enter/Exit the Ultra Low Power Mode on data only (D-PHY PLL running) + (+) Enter/Exit the Ultra Low Power Mode on data only and clock (D-PHY PLL turned off) + (+) Start/Stop test pattern generation + (+) Slew-Rate And Delay Tuning + (+) Low-Power Reception Filter Tuning + (+) Activate an additional current path on all lanes to meet the SDDTx parameter + (+) Custom lane pins configuration + (+) Set custom timing for the PHY + (+) Force the Clock/Data Lane in TX Stop Mode + (+) Force LP Receiver in Low-Power Mode + (+) Force Data Lanes in RX Mode after a BTA + (+) Enable a pull-down on the lanes to prevent from floating states when unused + (+) Switch off the contention detection on data lanes + +@endverbatim + * @{ + */ + +/** + * @brief Configure the Generic interface read-back Virtual Channel ID. + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param VirtualChannelID Virtual channel ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_SetGenericVCID(DSI_HandleTypeDef *hdsi, uint32_t VirtualChannelID) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Update the GVCID register */ + hdsi->Instance->GVCIDR &= ~DSI_GVCIDR_VCID; + hdsi->Instance->GVCIDR |= VirtualChannelID; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Select video mode and configure the corresponding parameters + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains + * the DSI video mode configuration parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ConfigVideoMode(DSI_HandleTypeDef *hdsi, DSI_VidCfgTypeDef *VidCfg) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check the parameters */ + assert_param(IS_DSI_COLOR_CODING(VidCfg->ColorCoding)); + assert_param(IS_DSI_VIDEO_MODE_TYPE(VidCfg->Mode)); + assert_param(IS_DSI_LP_COMMAND(VidCfg->LPCommandEnable)); + assert_param(IS_DSI_LP_HFP(VidCfg->LPHorizontalFrontPorchEnable)); + assert_param(IS_DSI_LP_HBP(VidCfg->LPHorizontalBackPorchEnable)); + assert_param(IS_DSI_LP_VACTIVE(VidCfg->LPVerticalActiveEnable)); + assert_param(IS_DSI_LP_VFP(VidCfg->LPVerticalFrontPorchEnable)); + assert_param(IS_DSI_LP_VBP(VidCfg->LPVerticalBackPorchEnable)); + assert_param(IS_DSI_LP_VSYNC(VidCfg->LPVerticalSyncActiveEnable)); + assert_param(IS_DSI_FBTAA(VidCfg->FrameBTAAcknowledgeEnable)); + assert_param(IS_DSI_DE_POLARITY(VidCfg->DEPolarity)); + assert_param(IS_DSI_VSYNC_POLARITY(VidCfg->VSPolarity)); + assert_param(IS_DSI_HSYNC_POLARITY(VidCfg->HSPolarity)); + /* Check the LooselyPacked variant only in 18-bit mode */ + if (VidCfg->ColorCoding == DSI_RGB666) + { + assert_param(IS_DSI_LOOSELY_PACKED(VidCfg->LooselyPacked)); + } + + /* Select video mode by resetting CMDM and DSIM bits */ + hdsi->Instance->MCR &= ~DSI_MCR_CMDM; + hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM; + + /* Configure the video mode transmission type */ + hdsi->Instance->VMCR &= ~DSI_VMCR_VMT; + hdsi->Instance->VMCR |= VidCfg->Mode; + + /* Configure the video packet size */ + hdsi->Instance->VPCR &= ~DSI_VPCR_VPSIZE; + hdsi->Instance->VPCR |= VidCfg->PacketSize; + + /* Set the chunks number to be transmitted through the DSI link */ + hdsi->Instance->VCCR &= ~DSI_VCCR_NUMC; + hdsi->Instance->VCCR |= VidCfg->NumberOfChunks; + + /* Set the size of the null packet */ + hdsi->Instance->VNPCR &= ~DSI_VNPCR_NPSIZE; + hdsi->Instance->VNPCR |= VidCfg->NullPacketSize; + + /* Select the virtual channel for the LTDC interface traffic */ + hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID; + hdsi->Instance->LVCIDR |= VidCfg->VirtualChannelID; + + /* Configure the polarity of control signals */ + hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP); + hdsi->Instance->LPCR |= (VidCfg->DEPolarity | VidCfg->VSPolarity | VidCfg->HSPolarity); + + /* Select the color coding for the host */ + hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC; + hdsi->Instance->LCOLCR |= VidCfg->ColorCoding; + + /* Select the color coding for the wrapper */ + hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX; + hdsi->Instance->WCFGR |= ((VidCfg->ColorCoding) << 1U); + + /* Enable/disable the loosely packed variant to 18-bit configuration */ + if (VidCfg->ColorCoding == DSI_RGB666) + { + hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_LPE; + hdsi->Instance->LCOLCR |= VidCfg->LooselyPacked; + } + + /* Set the Horizontal Synchronization Active (HSA) in lane byte clock cycles */ + hdsi->Instance->VHSACR &= ~DSI_VHSACR_HSA; + hdsi->Instance->VHSACR |= VidCfg->HorizontalSyncActive; + + /* Set the Horizontal Back Porch (HBP) in lane byte clock cycles */ + hdsi->Instance->VHBPCR &= ~DSI_VHBPCR_HBP; + hdsi->Instance->VHBPCR |= VidCfg->HorizontalBackPorch; + + /* Set the total line time (HLINE=HSA+HBP+HACT+HFP) in lane byte clock cycles */ + hdsi->Instance->VLCR &= ~DSI_VLCR_HLINE; + hdsi->Instance->VLCR |= VidCfg->HorizontalLine; + + /* Set the Vertical Synchronization Active (VSA) */ + hdsi->Instance->VVSACR &= ~DSI_VVSACR_VSA; + hdsi->Instance->VVSACR |= VidCfg->VerticalSyncActive; + + /* Set the Vertical Back Porch (VBP)*/ + hdsi->Instance->VVBPCR &= ~DSI_VVBPCR_VBP; + hdsi->Instance->VVBPCR |= VidCfg->VerticalBackPorch; + + /* Set the Vertical Front Porch (VFP)*/ + hdsi->Instance->VVFPCR &= ~DSI_VVFPCR_VFP; + hdsi->Instance->VVFPCR |= VidCfg->VerticalFrontPorch; + + /* Set the Vertical Active period*/ + hdsi->Instance->VVACR &= ~DSI_VVACR_VA; + hdsi->Instance->VVACR |= VidCfg->VerticalActive; + + /* Configure the command transmission mode */ + hdsi->Instance->VMCR &= ~DSI_VMCR_LPCE; + hdsi->Instance->VMCR |= VidCfg->LPCommandEnable; + + /* Low power largest packet size */ + hdsi->Instance->LPMCR &= ~DSI_LPMCR_LPSIZE; + hdsi->Instance->LPMCR |= ((VidCfg->LPLargestPacketSize) << 16U); + + /* Low power VACT largest packet size */ + hdsi->Instance->LPMCR &= ~DSI_LPMCR_VLPSIZE; + hdsi->Instance->LPMCR |= VidCfg->LPVACTLargestPacketSize; + + /* Enable LP transition in HFP period */ + hdsi->Instance->VMCR &= ~DSI_VMCR_LPHFPE; + hdsi->Instance->VMCR |= VidCfg->LPHorizontalFrontPorchEnable; + + /* Enable LP transition in HBP period */ + hdsi->Instance->VMCR &= ~DSI_VMCR_LPHBPE; + hdsi->Instance->VMCR |= VidCfg->LPHorizontalBackPorchEnable; + + /* Enable LP transition in VACT period */ + hdsi->Instance->VMCR &= ~DSI_VMCR_LPVAE; + hdsi->Instance->VMCR |= VidCfg->LPVerticalActiveEnable; + + /* Enable LP transition in VFP period */ + hdsi->Instance->VMCR &= ~DSI_VMCR_LPVFPE; + hdsi->Instance->VMCR |= VidCfg->LPVerticalFrontPorchEnable; + + /* Enable LP transition in VBP period */ + hdsi->Instance->VMCR &= ~DSI_VMCR_LPVBPE; + hdsi->Instance->VMCR |= VidCfg->LPVerticalBackPorchEnable; + + /* Enable LP transition in vertical sync period */ + hdsi->Instance->VMCR &= ~DSI_VMCR_LPVSAE; + hdsi->Instance->VMCR |= VidCfg->LPVerticalSyncActiveEnable; + + /* Enable the request for an acknowledge response at the end of a frame */ + hdsi->Instance->VMCR &= ~DSI_VMCR_FBTAAE; + hdsi->Instance->VMCR |= VidCfg->FrameBTAAcknowledgeEnable; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Select adapted command mode and configure the corresponding parameters + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains + * the DSI command mode configuration parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ConfigAdaptedCommandMode(DSI_HandleTypeDef *hdsi, DSI_CmdCfgTypeDef *CmdCfg) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check the parameters */ + assert_param(IS_DSI_COLOR_CODING(CmdCfg->ColorCoding)); + assert_param(IS_DSI_TE_SOURCE(CmdCfg->TearingEffectSource)); + assert_param(IS_DSI_TE_POLARITY(CmdCfg->TearingEffectPolarity)); + assert_param(IS_DSI_AUTOMATIC_REFRESH(CmdCfg->AutomaticRefresh)); + assert_param(IS_DSI_VS_POLARITY(CmdCfg->VSyncPol)); + assert_param(IS_DSI_TE_ACK_REQUEST(CmdCfg->TEAcknowledgeRequest)); + assert_param(IS_DSI_DE_POLARITY(CmdCfg->DEPolarity)); + assert_param(IS_DSI_VSYNC_POLARITY(CmdCfg->VSPolarity)); + assert_param(IS_DSI_HSYNC_POLARITY(CmdCfg->HSPolarity)); + + /* Select command mode by setting CMDM and DSIM bits */ + hdsi->Instance->MCR |= DSI_MCR_CMDM; + hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM; + hdsi->Instance->WCFGR |= DSI_WCFGR_DSIM; + + /* Select the virtual channel for the LTDC interface traffic */ + hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID; + hdsi->Instance->LVCIDR |= CmdCfg->VirtualChannelID; + + /* Configure the polarity of control signals */ + hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP); + hdsi->Instance->LPCR |= (CmdCfg->DEPolarity | CmdCfg->VSPolarity | CmdCfg->HSPolarity); + + /* Select the color coding for the host */ + hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC; + hdsi->Instance->LCOLCR |= CmdCfg->ColorCoding; + + /* Select the color coding for the wrapper */ + hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX; + hdsi->Instance->WCFGR |= ((CmdCfg->ColorCoding) << 1U); + + /* Configure the maximum allowed size for write memory command */ + hdsi->Instance->LCCR &= ~DSI_LCCR_CMDSIZE; + hdsi->Instance->LCCR |= CmdCfg->CommandSize; + + /* Configure the tearing effect source and polarity and select the refresh mode */ + hdsi->Instance->WCFGR &= ~(DSI_WCFGR_TESRC | DSI_WCFGR_TEPOL | DSI_WCFGR_AR | DSI_WCFGR_VSPOL); + hdsi->Instance->WCFGR |= (CmdCfg->TearingEffectSource | CmdCfg->TearingEffectPolarity | CmdCfg->AutomaticRefresh | + CmdCfg->VSyncPol); + + /* Configure the tearing effect acknowledge request */ + hdsi->Instance->CMCR &= ~DSI_CMCR_TEARE; + hdsi->Instance->CMCR |= CmdCfg->TEAcknowledgeRequest; + + /* Enable the Tearing Effect interrupt */ + __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_TE); + + /* Enable the End of Refresh interrupt */ + __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_ER); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Configure command transmission mode: High-speed or Low-power + * and enable/disable acknowledge request after packet transmission + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param LPCmd pointer to a DSI_LPCmdTypeDef structure that contains + * the DSI command transmission mode configuration parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ConfigCommand(DSI_HandleTypeDef *hdsi, DSI_LPCmdTypeDef *LPCmd) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + assert_param(IS_DSI_LP_GSW0P(LPCmd->LPGenShortWriteNoP)); + assert_param(IS_DSI_LP_GSW1P(LPCmd->LPGenShortWriteOneP)); + assert_param(IS_DSI_LP_GSW2P(LPCmd->LPGenShortWriteTwoP)); + assert_param(IS_DSI_LP_GSR0P(LPCmd->LPGenShortReadNoP)); + assert_param(IS_DSI_LP_GSR1P(LPCmd->LPGenShortReadOneP)); + assert_param(IS_DSI_LP_GSR2P(LPCmd->LPGenShortReadTwoP)); + assert_param(IS_DSI_LP_GLW(LPCmd->LPGenLongWrite)); + assert_param(IS_DSI_LP_DSW0P(LPCmd->LPDcsShortWriteNoP)); + assert_param(IS_DSI_LP_DSW1P(LPCmd->LPDcsShortWriteOneP)); + assert_param(IS_DSI_LP_DSR0P(LPCmd->LPDcsShortReadNoP)); + assert_param(IS_DSI_LP_DLW(LPCmd->LPDcsLongWrite)); + assert_param(IS_DSI_LP_MRDP(LPCmd->LPMaxReadPacket)); + assert_param(IS_DSI_ACK_REQUEST(LPCmd->AcknowledgeRequest)); + + /* Select High-speed or Low-power for command transmission */ + hdsi->Instance->CMCR &= ~(DSI_CMCR_GSW0TX | \ + DSI_CMCR_GSW1TX | \ + DSI_CMCR_GSW2TX | \ + DSI_CMCR_GSR0TX | \ + DSI_CMCR_GSR1TX | \ + DSI_CMCR_GSR2TX | \ + DSI_CMCR_GLWTX | \ + DSI_CMCR_DSW0TX | \ + DSI_CMCR_DSW1TX | \ + DSI_CMCR_DSR0TX | \ + DSI_CMCR_DLWTX | \ + DSI_CMCR_MRDPS); + hdsi->Instance->CMCR |= (LPCmd->LPGenShortWriteNoP | \ + LPCmd->LPGenShortWriteOneP | \ + LPCmd->LPGenShortWriteTwoP | \ + LPCmd->LPGenShortReadNoP | \ + LPCmd->LPGenShortReadOneP | \ + LPCmd->LPGenShortReadTwoP | \ + LPCmd->LPGenLongWrite | \ + LPCmd->LPDcsShortWriteNoP | \ + LPCmd->LPDcsShortWriteOneP | \ + LPCmd->LPDcsShortReadNoP | \ + LPCmd->LPDcsLongWrite | \ + LPCmd->LPMaxReadPacket); + + /* Configure the acknowledge request after each packet transmission */ + hdsi->Instance->CMCR &= ~DSI_CMCR_ARE; + hdsi->Instance->CMCR |= LPCmd->AcknowledgeRequest; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Configure the flow control parameters + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param FlowControl flow control feature(s) to be enabled. + * This parameter can be any combination of @arg DSI_FlowControl. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ConfigFlowControl(DSI_HandleTypeDef *hdsi, uint32_t FlowControl) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check the parameters */ + assert_param(IS_DSI_FLOW_CONTROL(FlowControl)); + + /* Set the DSI Host Protocol Configuration Register */ + hdsi->Instance->PCR &= ~DSI_FLOW_CONTROL_ALL; + hdsi->Instance->PCR |= FlowControl; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Configure the DSI PHY timer parameters + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param PhyTimers DSI_PHY_TimerTypeDef structure that contains + * the DSI PHY timing parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ConfigPhyTimer(DSI_HandleTypeDef *hdsi, DSI_PHY_TimerTypeDef *PhyTimers) +{ + uint32_t maxTime; + /* Process locked */ + __HAL_LOCK(hdsi); + + maxTime = (PhyTimers->ClockLaneLP2HSTime > PhyTimers->ClockLaneHS2LPTime) ? PhyTimers->ClockLaneLP2HSTime : + PhyTimers->ClockLaneHS2LPTime; + + /* Clock lane timer configuration */ + + /* In Automatic Clock Lane control mode, the DSI Host can turn off the clock lane between two + High-Speed transmission. + To do so, the DSI Host calculates the time required for the clock lane to change from HighSpeed + to Low-Power and from Low-Power to High-Speed. + This timings are configured by the HS2LP_TIME and LP2HS_TIME in the DSI Host Clock Lane Timer Configuration + Register (DSI_CLTCR). + But the DSI Host is not calculating LP2HS_TIME + HS2LP_TIME but 2 x HS2LP_TIME. + + Workaround : Configure HS2LP_TIME and LP2HS_TIME with the same value being the max of HS2LP_TIME or LP2HS_TIME. + */ + hdsi->Instance->CLTCR &= ~(DSI_CLTCR_LP2HS_TIME | DSI_CLTCR_HS2LP_TIME); + hdsi->Instance->CLTCR |= (maxTime | ((maxTime) << 16U)); + + /* Data lane timer configuration */ + hdsi->Instance->DLTCR &= ~(DSI_DLTCR_MRD_TIME | DSI_DLTCR_LP2HS_TIME | DSI_DLTCR_HS2LP_TIME); + hdsi->Instance->DLTCR |= (PhyTimers->DataLaneMaxReadTime | ((PhyTimers->DataLaneLP2HSTime) << 16U) | (( + PhyTimers->DataLaneHS2LPTime) << 24U)); + + /* Configure the wait period to request HS transmission after a stop state */ + hdsi->Instance->PCONFR &= ~DSI_PCONFR_SW_TIME; + hdsi->Instance->PCONFR |= ((PhyTimers->StopWaitTime) << 8U); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Configure the DSI HOST timeout parameters + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param HostTimeouts DSI_HOST_TimeoutTypeDef structure that contains + * the DSI host timeout parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ConfigHostTimeouts(DSI_HandleTypeDef *hdsi, DSI_HOST_TimeoutTypeDef *HostTimeouts) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Set the timeout clock division factor */ + hdsi->Instance->CCR &= ~DSI_CCR_TOCKDIV; + hdsi->Instance->CCR |= ((HostTimeouts->TimeoutCkdiv) << 8U); + + /* High-speed transmission timeout */ + hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_HSTX_TOCNT; + hdsi->Instance->TCCR[0U] |= ((HostTimeouts->HighSpeedTransmissionTimeout) << 16U); + + /* Low-power reception timeout */ + hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_LPRX_TOCNT; + hdsi->Instance->TCCR[0U] |= HostTimeouts->LowPowerReceptionTimeout; + + /* High-speed read timeout */ + hdsi->Instance->TCCR[1U] &= ~DSI_TCCR1_HSRD_TOCNT; + hdsi->Instance->TCCR[1U] |= HostTimeouts->HighSpeedReadTimeout; + + /* Low-power read timeout */ + hdsi->Instance->TCCR[2U] &= ~DSI_TCCR2_LPRD_TOCNT; + hdsi->Instance->TCCR[2U] |= HostTimeouts->LowPowerReadTimeout; + + /* High-speed write timeout */ + hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_HSWR_TOCNT; + hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWriteTimeout; + + /* High-speed write presp mode */ + hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_PM; + hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWritePrespMode; + + /* Low-speed write timeout */ + hdsi->Instance->TCCR[4U] &= ~DSI_TCCR4_LPWR_TOCNT; + hdsi->Instance->TCCR[4U] |= HostTimeouts->LowPowerWriteTimeout; + + /* BTA timeout */ + hdsi->Instance->TCCR[5U] &= ~DSI_TCCR5_BTA_TOCNT; + hdsi->Instance->TCCR[5U] |= HostTimeouts->BTATimeout; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Start the DSI module + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_Start(DSI_HandleTypeDef *hdsi) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Enable the DSI host */ + __HAL_DSI_ENABLE(hdsi); + + /* Enable the DSI wrapper */ + __HAL_DSI_WRAPPER_ENABLE(hdsi); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Stop the DSI module + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_Stop(DSI_HandleTypeDef *hdsi) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Disable the DSI host */ + __HAL_DSI_DISABLE(hdsi); + + /* Disable the DSI wrapper */ + __HAL_DSI_WRAPPER_DISABLE(hdsi); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Refresh the display in command mode + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_Refresh(DSI_HandleTypeDef *hdsi) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Update the display */ + hdsi->Instance->WCR |= DSI_WCR_LTDCEN; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Controls the display color mode in Video mode + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param ColorMode Color mode (full or 8-colors). + * This parameter can be any value of @arg DSI_Color_Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ColorMode(DSI_HandleTypeDef *hdsi, uint32_t ColorMode) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check the parameters */ + assert_param(IS_DSI_COLOR_MODE(ColorMode)); + + /* Update the display color mode */ + hdsi->Instance->WCR &= ~DSI_WCR_COLM; + hdsi->Instance->WCR |= ColorMode; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Control the display shutdown in Video mode + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param Shutdown Shut-down (Display-ON or Display-OFF). + * This parameter can be any value of @arg DSI_ShutDown + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_Shutdown(DSI_HandleTypeDef *hdsi, uint32_t Shutdown) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check the parameters */ + assert_param(IS_DSI_SHUT_DOWN(Shutdown)); + + /* Update the display Shutdown */ + hdsi->Instance->WCR &= ~DSI_WCR_SHTDN; + hdsi->Instance->WCR |= Shutdown; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief write short DCS or short Generic command + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param ChannelID Virtual channel ID. + * @param Mode DSI short packet data type. + * This parameter can be any value of @arg DSI_SHORT_WRITE_PKT_Data_Type. + * @param Param1 DSC command or first generic parameter. + * This parameter can be any value of @arg DSI_DCS_Command or a + * generic command code. + * @param Param2 DSC parameter or second generic parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ShortWrite(DSI_HandleTypeDef *hdsi, + uint32_t ChannelID, + uint32_t Mode, + uint32_t Param1, + uint32_t Param2) +{ + HAL_StatusTypeDef status; + /* Check the parameters */ + assert_param(IS_DSI_SHORT_WRITE_PACKET_TYPE(Mode)); + + /* Process locked */ + __HAL_LOCK(hdsi); + + status = DSI_ShortWrite(hdsi, ChannelID, Mode, Param1, Param2); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return status; +} + +/** + * @brief write long DCS or long Generic command + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param ChannelID Virtual channel ID. + * @param Mode DSI long packet data type. + * This parameter can be any value of @arg DSI_LONG_WRITE_PKT_Data_Type. + * @param NbParams Number of parameters. + * @param Param1 DSC command or first generic parameter. + * This parameter can be any value of @arg DSI_DCS_Command or a + * generic command code + * @param ParametersTable Pointer to parameter values table. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_LongWrite(DSI_HandleTypeDef *hdsi, + uint32_t ChannelID, + uint32_t Mode, + uint32_t NbParams, + uint32_t Param1, + const uint8_t *ParametersTable) +{ + uint32_t uicounter; + uint32_t nbBytes; + uint32_t count; + uint32_t tickstart; + uint32_t fifoword; + const uint8_t *pparams = ParametersTable; + + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check the parameters */ + assert_param(IS_DSI_LONG_WRITE_PACKET_TYPE(Mode)); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for Command FIFO Empty */ + while ((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + + /* Set the DCS code on payload byte 1, and the other parameters on the write FIFO command*/ + fifoword = Param1; + nbBytes = (NbParams < 3U) ? NbParams : 3U; + + for (count = 0U; count < nbBytes; count++) + { + fifoword |= (((uint32_t)(*(pparams + count))) << (8U + (8U * count))); + } + hdsi->Instance->GPDR = fifoword; + + uicounter = NbParams - nbBytes; + pparams += nbBytes; + /* Set the Next parameters on the write FIFO command*/ + while (uicounter != 0U) + { + nbBytes = (uicounter < 4U) ? uicounter : 4U; + fifoword = 0U; + for (count = 0U; count < nbBytes; count++) + { + fifoword |= (((uint32_t)(*(pparams + count))) << (8U * count)); + } + hdsi->Instance->GPDR = fifoword; + + uicounter -= nbBytes; + pparams += nbBytes; + } + + /* Configure the packet to send a long DCS command */ + DSI_ConfigPacketHeader(hdsi->Instance, + ChannelID, + Mode, + ((NbParams + 1U) & 0x00FFU), + (((NbParams + 1U) & 0xFF00U) >> 8U)); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Read command (DCS or generic) + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param ChannelNbr Virtual channel ID + * @param Array pointer to a buffer to store the payload of a read back operation. + * @param Size Data size to be read (in byte). + * @param Mode DSI read packet data type. + * This parameter can be any value of @arg DSI_SHORT_READ_PKT_Data_Type. + * @param DCSCmd DCS get/read command. + * @param ParametersTable Pointer to parameter values table. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_Read(DSI_HandleTypeDef *hdsi, + uint32_t ChannelNbr, + uint8_t *Array, + uint32_t Size, + uint32_t Mode, + uint32_t DCSCmd, + uint8_t *ParametersTable) +{ + uint32_t tickstart; + uint8_t *pdata = Array; + uint32_t datasize = Size; + uint32_t fifoword; + uint32_t nbbytes; + uint32_t count; + + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check the parameters */ + assert_param(IS_DSI_READ_PACKET_TYPE(Mode)); + + if (datasize > 2U) + { + /* set max return packet size */ + if (DSI_ShortWrite(hdsi, ChannelNbr, DSI_MAX_RETURN_PKT_SIZE, ((datasize) & 0xFFU), + (((datasize) >> 8U) & 0xFFU)) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + } + + /* Configure the packet to read command */ + if (Mode == DSI_DCS_SHORT_PKT_READ) + { + DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, DCSCmd, 0U); + } + else if (Mode == DSI_GEN_SHORT_PKT_READ_P0) + { + DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, 0U, 0U); + } + else if (Mode == DSI_GEN_SHORT_PKT_READ_P1) + { + DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], 0U); + } + else if (Mode == DSI_GEN_SHORT_PKT_READ_P2) + { + DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], ParametersTable[1U]); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* If DSI fifo is not empty, read requested bytes */ + while (((int32_t)(datasize)) > 0) + { + if ((hdsi->Instance->GPSR & DSI_GPSR_PRDFE) == 0U) + { + fifoword = hdsi->Instance->GPDR; + nbbytes = (datasize < 4U) ? datasize : 4U; + + for (count = 0U; count < nbbytes; count++) + { + *pdata = (uint8_t)(fifoword >> (8U * count)); + pdata++; + datasize--; + } + } + + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + + /* Software workaround to avoid HAL_TIMEOUT when a DSI read command is */ + /* issued to the panel and the read data is not captured by the DSI Host */ + /* which returns Packet Size Error. */ + /* Need to ensure that the Read command has finished before checking PSE */ + if ((hdsi->Instance->GPSR & DSI_GPSR_RCB) == 0U) + { + if ((hdsi->Instance->ISR[1U] & DSI_ISR1_PSE) == DSI_ISR1_PSE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL running + * (only data lanes are in ULPM) + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_EnterULPMData(DSI_HandleTypeDef *hdsi) +{ + uint32_t tickstart; + + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Verify the initial status of the DSI Host */ + + /* Verify that the clock lane and the digital section of the D-PHY are enabled */ + if ((hdsi->Instance->PCTLR & (DSI_PCTLR_CKE | DSI_PCTLR_DEN)) != (DSI_PCTLR_CKE | DSI_PCTLR_DEN)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Verify that the D-PHY PLL and the reference bias are enabled */ + if ((hdsi->Instance->WRPCR & DSI_WRPCR_PLLEN) != DSI_WRPCR_PLLEN) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + else if ((hdsi->Instance->WRPCR & DSI_WRPCR_REGEN) != DSI_WRPCR_REGEN) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Verify that there are no ULPS exit or request on data lanes */ + if ((hdsi->Instance->PUCR & (DSI_PUCR_UEDL | DSI_PUCR_URDL)) != 0U) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Verify that there are no Transmission trigger */ + if ((hdsi->Instance->PTTCR & DSI_PTTCR_TX_TRIG) != 0U) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Requires min of 400us delay before reading the PLLLS flag */ + /* 1ms delay is inserted that is the minimum HAL delay granularity */ + HAL_Delay(1); + + /* Verify that D-PHY PLL is locked */ + tickstart = HAL_GetTick(); + + while ((__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U)) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + + /* Verify that all active lanes are in Stop state */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + if ((hdsi->Instance->PSR & DSI_PSR_UAN0) != DSI_PSR_UAN0) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + if ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* ULPS Request on Data Lanes */ + hdsi->Instance->PUCR |= DSI_PUCR_URDL; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until the D-PHY active lanes enter into ULPM */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + while ((hdsi->Instance->PSR & DSI_PSR_UAN0) != 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL running + * (only data lanes are in ULPM) + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ExitULPMData(DSI_HandleTypeDef *hdsi) +{ + uint32_t tickstart; + + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Verify that all active lanes are in ULPM */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + if ((hdsi->Instance->PSR & DSI_PSR_UAN0) != 0U) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + if ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != 0U) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + + /* Turn on the DSI PLL */ + __HAL_DSI_PLL_ENABLE(hdsi); + + /* Requires min of 400us delay before reading the PLLLS flag */ + /* 1ms delay is inserted that is the minimum HAL delay granularity */ + HAL_Delay(1); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for the lock of the PLL */ + while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + + /* Exit ULPS on Data Lanes */ + hdsi->Instance->PUCR |= DSI_PUCR_UEDL; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until all active lanes exit ULPM */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + while ((hdsi->Instance->PSR & DSI_PSR_UAN0) != DSI_PSR_UAN0) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1)) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + + /* wait for 1 ms*/ + HAL_Delay(1U); + + /* De-assert the ULPM requests and the ULPM exit bits */ + hdsi->Instance->PUCR = 0U; + + /* Verify that D-PHY PLL is enabled */ + if ((hdsi->Instance->WRPCR & DSI_WRPCR_PLLEN) != DSI_WRPCR_PLLEN) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Verify that all active lanes are in Stop state */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + if ((hdsi->Instance->PSR & DSI_PSR_UAN0) != DSI_PSR_UAN0) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + if ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Verify that D-PHY PLL is locked */ + /* Requires min of 400us delay before reading the PLLLS flag */ + /* 1ms delay is inserted that is the minimum HAL delay granularity */ + HAL_Delay(1); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for the lock of the PLL */ + while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off + * (both data and clock lanes are in ULPM) + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_EnterULPM(DSI_HandleTypeDef *hdsi) +{ + uint32_t tickstart; + + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Verify the initial status of the DSI Host */ + + /* Verify that the clock lane and the digital section of the D-PHY are enabled */ + if ((hdsi->Instance->PCTLR & (DSI_PCTLR_CKE | DSI_PCTLR_DEN)) != (DSI_PCTLR_CKE | DSI_PCTLR_DEN)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Verify that the D-PHY PLL and the reference bias are enabled */ + if ((hdsi->Instance->WRPCR & DSI_WRPCR_PLLEN) != DSI_WRPCR_PLLEN) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + else if ((hdsi->Instance->WRPCR & DSI_WRPCR_REGEN) != DSI_WRPCR_REGEN) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Verify that there are no ULPS exit or request on both data and clock lanes */ + if ((hdsi->Instance->PUCR & (DSI_PUCR_UEDL | DSI_PUCR_URDL | DSI_PUCR_UECL | DSI_PUCR_URCL)) != 0U) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Verify that there are no Transmission trigger */ + if ((hdsi->Instance->PTTCR & DSI_PTTCR_TX_TRIG) != 0U) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Requires min of 400us delay before reading the PLLLS flag */ + /* 1ms delay is inserted that is the minimum HAL delay granularity */ + HAL_Delay(1); + + /* Verify that D-PHY PLL is locked */ + tickstart = HAL_GetTick(); + + while ((__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U)) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + + /* Verify that all active lanes are in Stop state */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + if ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_PSS0)) != (DSI_PSR_UAN0 | DSI_PSR_PSS0)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + if ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_PSS0 | DSI_PSR_PSS1 | \ + DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_PSS0 | DSI_PSR_PSS1 | DSI_PSR_UAN1)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Clock lane configuration: no more HS request */ + hdsi->Instance->CLCR &= ~DSI_CLCR_DPCC; + + /* Use system PLL as byte lane clock source before stopping DSIPHY clock source */ + __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_PLL2); + + /* ULPS Request on Clock and Data Lanes */ + hdsi->Instance->PUCR |= (DSI_PUCR_URCL | DSI_PUCR_URDL); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until all active lanes enter ULPM */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + + /* Turn off the DSI PLL */ + __HAL_DSI_PLL_DISABLE(hdsi); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off + * (both data and clock lanes are in ULPM) + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ExitULPM(DSI_HandleTypeDef *hdsi) +{ + uint32_t tickstart; + + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Verify that all active lanes are in ULPM */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + if ((hdsi->Instance->PSR & (DSI_PSR_RUE0 | DSI_PSR_UAN0 | DSI_PSR_PSS0 | \ + DSI_PSR_UANC | DSI_PSR_PSSC | DSI_PSR_PD)) != 0U) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + if ((hdsi->Instance->PSR & (DSI_PSR_RUE0 | DSI_PSR_UAN0 | DSI_PSR_PSS0 | DSI_PSR_UAN1 | \ + DSI_PSR_PSS1 | DSI_PSR_UANC | DSI_PSR_PSSC | DSI_PSR_PD)) != 0U) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + + /* Turn on the DSI PLL */ + __HAL_DSI_PLL_ENABLE(hdsi); + + /* Requires min of 400us delay before reading the PLLLS flag */ + /* 1ms delay is inserted that is the minimum HAL delay granularity */ + HAL_Delay(1); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for the lock of the PLL */ + while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + + /* Exit ULPS on Clock and Data Lanes */ + hdsi->Instance->PUCR |= (DSI_PUCR_UECL | DSI_PUCR_UEDL); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until all active lanes exit ULPM */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UANC)) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1 | + DSI_PSR_UANC)) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + + /* wait for 1 ms */ + HAL_Delay(1U); + + /* De-assert the ULPM requests and the ULPM exit bits */ + hdsi->Instance->PUCR = 0U; + + /* Switch the lane byte clock source in the RCC from system PLL to D-PHY */ + __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_PHY); + + /* Restore clock lane configuration to HS */ + hdsi->Instance->CLCR |= DSI_CLCR_DPCC; + + /* Verify that D-PHY PLL is enabled */ + if ((hdsi->Instance->WRPCR & DSI_WRPCR_PLLEN) != DSI_WRPCR_PLLEN) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Verify that all active lanes are in Stop state */ + if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE) + { + if ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_PSS0)) != (DSI_PSR_UAN0 | DSI_PSR_PSS0)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + } + else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES) + { + if ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_PSS0 | DSI_PSR_PSS1 | \ + DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_PSS0 | DSI_PSR_PSS1 | DSI_PSR_UAN1)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + return HAL_ERROR; + } + + /* Verify that D-PHY PLL is locked */ + /* Requires min of 400us delay before reading the PLLLS flag */ + /* 1ms delay is inserted that is the minimum HAL delay granularity */ + HAL_Delay(1); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for the lock of the PLL */ + while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE) + { + /* Process Unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_TIMEOUT; + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Start test pattern generation + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param Mode Pattern generator mode + * This parameter can be one of the following values: + * 0 : Color bars (horizontal or vertical) + * 1 : BER pattern (vertical only) + * @param Orientation Pattern generator orientation + * This parameter can be one of the following values: + * 0 : Vertical color bars + * 1 : Horizontal color bars + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_PatternGeneratorStart(DSI_HandleTypeDef *hdsi, uint32_t Mode, uint32_t Orientation) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Configure pattern generator mode and orientation */ + hdsi->Instance->VMCR &= ~(DSI_VMCR_PGM | DSI_VMCR_PGO); + hdsi->Instance->VMCR |= ((Mode << 20U) | (Orientation << 24U)); + + /* Enable pattern generator by setting PGE bit */ + hdsi->Instance->VMCR |= DSI_VMCR_PGE; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Stop test pattern generation + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_PatternGeneratorStop(DSI_HandleTypeDef *hdsi) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Disable pattern generator by clearing PGE bit */ + hdsi->Instance->VMCR &= ~DSI_VMCR_PGE; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Set Slew-Rate And Delay Tuning + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param CommDelay Communication delay to be adjusted. + * This parameter can be any value of @arg DSI_Communication_Delay + * @param Lane select between clock or data lanes. + * This parameter can be any value of @arg DSI_Lane_Group + * @param Value Custom value of the slew-rate or delay + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_SetSlewRateAndDelayTuning(DSI_HandleTypeDef *hdsi, uint32_t CommDelay, uint32_t Lane, + uint32_t Value) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_DSI_COMMUNICATION_DELAY(CommDelay)); + assert_param(IS_DSI_LANE_GROUP(Lane)); + + switch (CommDelay) + { + case DSI_SLEW_RATE_HSTX: + if (Lane == DSI_CLOCK_LANE) + { + /* High-Speed Transmission Slew Rate Control on Clock Lane */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCCL; + hdsi->Instance->WPCR[1U] |= Value << 16U; + } + else if (Lane == DSI_DATA_LANES) + { + /* High-Speed Transmission Slew Rate Control on Data Lanes */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCDL; + hdsi->Instance->WPCR[1U] |= Value << 18U; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + break; + case DSI_SLEW_RATE_LPTX: + if (Lane == DSI_CLOCK_LANE) + { + /* Low-Power transmission Slew Rate Compensation on Clock Lane */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCCL; + hdsi->Instance->WPCR[1U] |= Value << 6U; + } + else if (Lane == DSI_DATA_LANES) + { + /* Low-Power transmission Slew Rate Compensation on Data Lanes */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCDL; + hdsi->Instance->WPCR[1U] |= Value << 8U; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + break; + case DSI_HS_DELAY: + if (Lane == DSI_CLOCK_LANE) + { + /* High-Speed Transmission Delay on Clock Lane */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDCL; + hdsi->Instance->WPCR[1U] |= Value; + } + else if (Lane == DSI_DATA_LANES) + { + /* High-Speed Transmission Delay on Data Lanes */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDDL; + hdsi->Instance->WPCR[1U] |= Value << 2U; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + break; + default: + break; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Low-Power Reception Filter Tuning + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param Frequency cutoff frequency of low-pass filter at the input of LPRX + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_SetLowPowerRXFilter(DSI_HandleTypeDef *hdsi, uint32_t Frequency) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Low-Power RX low-pass Filtering Tuning */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPRXFT; + hdsi->Instance->WPCR[1U] |= Frequency << 25U; + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Activate an additional current path on all lanes to meet the SDDTx parameter + * defined in the MIPI D-PHY specification + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param State ENABLE or DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_SetSDD(DSI_HandleTypeDef *hdsi, FunctionalState State) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_FUNCTIONAL_STATE(State)); + + /* Activate/Disactivate additional current path on all lanes */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_SDDC; + hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 12U); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Custom lane pins configuration + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param CustomLane Function to be applied on selected lane. + * This parameter can be any value of @arg DSI_CustomLane + * @param Lane select between clock or data lane 0 or data lane 1. + * This parameter can be any value of @arg DSI_Lane_Select + * @param State ENABLE or DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_SetLanePinsConfiguration(DSI_HandleTypeDef *hdsi, uint32_t CustomLane, uint32_t Lane, + FunctionalState State) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_DSI_CUSTOM_LANE(CustomLane)); + assert_param(IS_DSI_LANE(Lane)); + assert_param(IS_FUNCTIONAL_STATE(State)); + + switch (CustomLane) + { + case DSI_SWAP_LANE_PINS: + if (Lane == DSI_CLK_LANE) + { + /* Swap pins on clock lane */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWCL; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 6U); + } + else if (Lane == DSI_DATA_LANE0) + { + /* Swap pins on data lane 0 */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL0; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 7U); + } + else if (Lane == DSI_DATA_LANE1) + { + /* Swap pins on data lane 1 */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL1; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 8U); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + break; + case DSI_INVERT_HS_SIGNAL: + if (Lane == DSI_CLK_LANE) + { + /* Invert HS signal on clock lane */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSICL; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 9U); + } + else if (Lane == DSI_DATA_LANE0) + { + /* Invert HS signal on data lane 0 */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL0; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 10U); + } + else if (Lane == DSI_DATA_LANE1) + { + /* Invert HS signal on data lane 1 */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL1; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 11U); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + break; + default: + break; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Set custom timing for the PHY + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param Timing PHY timing to be adjusted. + * This parameter can be any value of @arg DSI_PHY_Timing + * @param State ENABLE or DISABLE + * @param Value Custom value of the timing + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_SetPHYTimings(DSI_HandleTypeDef *hdsi, uint32_t Timing, FunctionalState State, uint32_t Value) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_DSI_PHY_TIMING(Timing)); + assert_param(IS_FUNCTIONAL_STATE(State)); + + switch (Timing) + { + case DSI_TCLK_POST: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPOSTEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 27U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[4U] &= ~DSI_WPCR4_TCLKPOST; + hdsi->Instance->WPCR[4U] |= Value & DSI_WPCR4_TCLKPOST; + } + + break; + case DSI_TLPX_CLK: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXCEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 26U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXC; + hdsi->Instance->WPCR[3U] |= (Value << 24U) & DSI_WPCR3_TLPXC; + } + + break; + case DSI_THS_EXIT: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSEXITEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 25U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSEXIT; + hdsi->Instance->WPCR[3U] |= (Value << 16U) & DSI_WPCR3_THSEXIT; + } + + break; + case DSI_TLPX_DATA: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXDEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 24U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXD; + hdsi->Instance->WPCR[3U] |= (Value << 8U) & DSI_WPCR3_TLPXD; + } + + break; + case DSI_THS_ZERO: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSZEROEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 23U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSZERO; + hdsi->Instance->WPCR[3U] |= Value & DSI_WPCR3_THSZERO; + } + + break; + case DSI_THS_TRAIL: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSTRAILEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 22U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSTRAIL; + hdsi->Instance->WPCR[2U] |= (Value << 24U) & DSI_WPCR2_THSTRAIL; + } + + break; + case DSI_THS_PREPARE: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSPREPEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 21U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSPREP; + hdsi->Instance->WPCR[2U] |= (Value << 16U) & DSI_WPCR2_THSPREP; + } + + break; + case DSI_TCLK_ZERO: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKZEROEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 20U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKZERO; + hdsi->Instance->WPCR[2U] |= (Value << 8U) & DSI_WPCR2_TCLKZERO; + } + + break; + case DSI_TCLK_PREPARE: + /* Enable/Disable custom timing setting */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPREPEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 19U); + + if (State != DISABLE) + { + /* Set custom value */ + hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKPREP; + hdsi->Instance->WPCR[2U] |= Value & DSI_WPCR2_TCLKPREP; + } + + break; + default: + break; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Force the Clock/Data Lane in TX Stop Mode + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param Lane select between clock or data lanes. + * This parameter can be any value of @arg DSI_Lane_Group + * @param State ENABLE or DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ForceTXStopMode(DSI_HandleTypeDef *hdsi, uint32_t Lane, FunctionalState State) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_DSI_LANE_GROUP(Lane)); + assert_param(IS_FUNCTIONAL_STATE(State)); + + if (Lane == DSI_CLOCK_LANE) + { + /* Force/Unforce the Clock Lane in TX Stop Mode */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMCL; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 12U); + } + else if (Lane == DSI_DATA_LANES) + { + /* Force/Unforce the Data Lanes in TX Stop Mode */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMDL; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 13U); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Force LP Receiver in Low-Power Mode + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param State ENABLE or DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ForceRXLowPower(DSI_HandleTypeDef *hdsi, FunctionalState State) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_FUNCTIONAL_STATE(State)); + + /* Force/Unforce LP Receiver in Low-Power Mode */ + hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_FLPRXLPM; + hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 22U); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Force Data Lanes in RX Mode after a BTA + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param State ENABLE or DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_ForceDataLanesInRX(DSI_HandleTypeDef *hdsi, FunctionalState State) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_FUNCTIONAL_STATE(State)); + + /* Force Data Lanes in RX Mode */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TDDL; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 16U); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Enable a pull-down on the lanes to prevent from floating states when unused + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param State ENABLE or DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_SetPullDown(DSI_HandleTypeDef *hdsi, FunctionalState State) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_FUNCTIONAL_STATE(State)); + + /* Enable/Disable pull-down on lanes */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_PDEN; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 18U); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @brief Switch off the contention detection on data lanes + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @param State ENABLE or DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DSI_SetContentionDetectionOff(DSI_HandleTypeDef *hdsi, FunctionalState State) +{ + /* Process locked */ + __HAL_LOCK(hdsi); + + /* Check function parameters */ + assert_param(IS_FUNCTIONAL_STATE(State)); + + /* Contention Detection on Data Lanes OFF */ + hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_CDOFFDL; + hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 14U); + + /* Process unlocked */ + __HAL_UNLOCK(hdsi); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DSI_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DSI state. + (+) Get error code. + +@endverbatim + * @{ + */ + +/** + * @brief Return the DSI state + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval HAL state + */ +HAL_DSI_StateTypeDef HAL_DSI_GetState(const DSI_HandleTypeDef *hdsi) +{ + return hdsi->State; +} + +/** + * @brief Return the DSI error code + * @param hdsi pointer to a DSI_HandleTypeDef structure that contains + * the configuration information for the DSI. + * @retval DSI Error Code + */ +uint32_t HAL_DSI_GetError(const DSI_HandleTypeDef *hdsi) +{ + /* Get the error code */ + return hdsi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DSI */ + +#endif /* HAL_DSI_MODULE_ENABLED */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c new file mode 100644 index 0000000..2536a73 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c @@ -0,0 +1,3379 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_eth.c + * @author MCD Application Team + * @brief ETH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Ethernet (ETH) peripheral: + * + Initialization and deinitialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The ETH HAL driver can be used as follows: + + (#)Declare a ETH_HandleTypeDef handle structure, for example: + ETH_HandleTypeDef heth; + + (#)Fill parameters of Init structure in heth handle + + (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...) + + (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API: + (##) Enable the Ethernet interface clock using + (+++) __HAL_RCC_ETH1MAC_CLK_ENABLE() + (+++) __HAL_RCC_ETH1TX_CLK_ENABLE() + (+++) __HAL_RCC_ETH1RX_CLK_ENABLE() + + (##) Initialize the related GPIO clocks + (##) Configure Ethernet pinout + (##) Configure Ethernet NVIC interrupt (in Interrupt mode) + + (#) Ethernet data reception is asynchronous, so call the following API + to start the listening mode: + (##) HAL_ETH_Start(): + This API starts the MAC and DMA transmission and reception process, + without enabling end of transfer interrupts, in this mode user + has to poll for data reception by calling HAL_ETH_ReadData() + (##) HAL_ETH_Start_IT(): + This API starts the MAC and DMA transmission and reception process, + end of transfer interrupts are enabled in this mode, + HAL_ETH_RxCpltCallback() will be executed when an Ethernet packet is received + + (#) When data is received user can call the following API to get received data: + (##) HAL_ETH_ReadData(): Read a received packet + + (#) For transmission path, two APIs are available: + (##) HAL_ETH_Transmit(): Transmit an ETH frame in blocking mode + (##) HAL_ETH_Transmit_IT(): Transmit an ETH frame in interrupt mode, + HAL_ETH_TxCpltCallback() will be executed when end of transfer occur + + (#) Communication with an external PHY device: + (##) HAL_ETH_ReadPHYRegister(): Read a register from an external PHY + (##) HAL_ETH_WritePHYRegister(): Write data to an external RHY register + + (#) Configure the Ethernet MAC after ETH peripheral initialization + (##) HAL_ETH_GetMACConfig(): Get MAC actual configuration into ETH_MACConfigTypeDef + (##) HAL_ETH_SetMACConfig(): Set MAC configuration based on ETH_MACConfigTypeDef + + (#) Configure the Ethernet DMA after ETH peripheral initialization + (##) HAL_ETH_GetDMAConfig(): Get DMA actual configuration into ETH_DMAConfigTypeDef + (##) HAL_ETH_SetDMAConfig(): Set DMA configuration based on ETH_DMAConfigTypeDef + + (#) Configure the Ethernet PTP after ETH peripheral initialization + (##) Define HAL_ETH_USE_PTP to use PTP APIs. + (##) HAL_ETH_PTP_GetConfig(): Get PTP actual configuration into ETH_PTP_ConfigTypeDef + (##) HAL_ETH_PTP_SetConfig(): Set PTP configuration based on ETH_PTP_ConfigTypeDef + (##) HAL_ETH_PTP_GetTime(): Get Seconds and Nanoseconds for the Ethernet PTP registers + (##) HAL_ETH_PTP_SetTime(): Set Seconds and Nanoseconds for the Ethernet PTP registers + (##) HAL_ETH_PTP_AddTimeOffset(): Add Seconds and Nanoseconds offset for the Ethernet PTP registers + (##) HAL_ETH_PTP_InsertTxTimestamp(): Insert Timestamp in transmission + (##) HAL_ETH_PTP_GetTxTimestamp(): Get transmission timestamp + (##) HAL_ETH_PTP_GetRxTimestamp(): Get reception timestamp + + -@- The ARP offload feature is not supported in this driver. + + -@- The PTP offload feature is not supported in this driver. + + *** Callback registration *** + ============================================= + + The compilation define USE_HAL_ETH_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_ETH_RegisterCallback() to register an interrupt callback. + + Function HAL_ETH_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) PMTCallback : Power Management Callback + (+) EEECallback : EEE Callback. + (+) WakeUpCallback : Wake UP Callback + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback: MspDeInit Callback. + + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + For specific callbacks RxAllocateCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterRxAllocateCallback(). + + For specific callbacks RxLinkCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterRxLinkCallback(). + + For specific callbacks TxFreeCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterTxFreeCallback(). + + For specific callbacks TxPtpCallback use dedicated register callbacks: + respectively HAL_ETH_RegisterTxPtpCallback(). + + Use function HAL_ETH_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_ETH_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) PMTCallback : Power Management Callback + (+) EEECallback : EEE Callback. + (+) WakeUpCallback : Wake UP Callback + (+) MspInitCallback : MspInit Callback. + (+) MspDeInitCallback: MspDeInit Callback. + + For specific callbacks RxAllocateCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterRxAllocateCallback(). + + For specific callbacks RxLinkCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterRxLinkCallback(). + + For specific callbacks TxFreeCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterTxFreeCallback(). + + For specific callbacks TxPtpCallback use dedicated unregister callbacks: + respectively HAL_ETH_UnRegisterTxPtpCallback(). + + By default, after the HAL_ETH_Init and when the state is HAL_ETH_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_ETH_TxCpltCallback(), HAL_ETH_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_ETH_Init/ HAL_ETH_DeInit only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_ETH_Init/ HAL_ETH_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in HAL_ETH_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_ETH_STATE_READY or HAL_ETH_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_ETH_RegisterCallback() before calling HAL_ETH_DeInit + or HAL_ETH_Init function. + + When The compilation define USE_HAL_ETH_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ +#ifdef HAL_ETH_MODULE_ENABLED + +#if defined(ETH) + +/** @defgroup ETH ETH + * @brief ETH HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup ETH_Private_Constants ETH Private Constants + * @{ + */ +#define ETH_MACCR_MASK 0xFFFB7F7CU +#define ETH_MACECR_MASK 0x3F077FFFU +#define ETH_MACPFR_MASK 0x800007FFU +#define ETH_MACWTR_MASK 0x0000010FU +#define ETH_MACTFCR_MASK 0xFFFF00F2U +#define ETH_MACRFCR_MASK 0x00000003U +#define ETH_MTLTQOMR_MASK 0x00000072U +#define ETH_MTLRQOMR_MASK 0x0000007BU + +#define ETH_DMAMR_MASK 0x00007802U +#define ETH_DMASBMR_MASK 0x0000D001U +#define ETH_DMACCR_MASK 0x00013FFFU +#define ETH_DMACTCR_MASK 0x003F1010U +#define ETH_DMACRCR_MASK 0x803F0000U +#define ETH_MACPCSR_MASK (ETH_MACPCSR_PWRDWN | ETH_MACPCSR_RWKPKTEN | \ + ETH_MACPCSR_MGKPKTEN | ETH_MACPCSR_GLBLUCAST | \ + ETH_MACPCSR_RWKPFE) + +/* Timeout values */ +#define ETH_DMARXNDESCWBF_ERRORS_MASK ((uint32_t)(ETH_DMARXNDESCWBF_DE | ETH_DMARXNDESCWBF_RE | \ + ETH_DMARXNDESCWBF_OE | ETH_DMARXNDESCWBF_RWT |\ + ETH_DMARXNDESCWBF_GP | ETH_DMARXNDESCWBF_CE)) + +#define ETH_MACTSCR_MASK 0x0087FF2FU + +#define ETH_MACSTSUR_VALUE 0xFFFFFFFFU +#define ETH_MACSTNUR_VALUE 0xBB9ACA00U +#define ETH_SEGMENT_SIZE_DEFAULT 0x218U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ETH_Private_Macros ETH Private Macros + * @{ + */ +/* Helper macros for TX descriptor handling */ +#define INCR_TX_DESC_INDEX(inx, offset) do {\ + (inx) += (offset);\ + if ((inx) >= (uint32_t)ETH_TX_DESC_CNT){\ + (inx) = ((inx) - (uint32_t)ETH_TX_DESC_CNT);}\ + } while (0) + +/* Helper macros for RX descriptor handling */ +#define INCR_RX_DESC_INDEX(inx, offset) do {\ + (inx) += (offset);\ + if ((inx) >= (uint32_t)ETH_RX_DESC_CNT){\ + (inx) = ((inx) - (uint32_t)ETH_RX_DESC_CNT);}\ + } while (0) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup ETH_Private_Functions ETH Private Functions + * @{ + */ +static void ETH_SetMACConfig(ETH_HandleTypeDef *heth, const ETH_MACConfigTypeDef *macconf); +static void ETH_SetDMAConfig(ETH_HandleTypeDef *heth, const ETH_DMAConfigTypeDef *dmaconf); +static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth); +static void ETH_DMATxDescListInit(ETH_HandleTypeDef *heth); +static void ETH_DMARxDescListInit(ETH_HandleTypeDef *heth); +static uint32_t ETH_Prepare_Tx_Descriptors(ETH_HandleTypeDef *heth, const ETH_TxPacketConfigTypeDef *pTxConfig, + uint32_t ItMode); +static void ETH_UpdateDescriptor(ETH_HandleTypeDef *heth); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup ETH_Exported_Functions ETH Exported Functions + * @{ + */ + +/** @defgroup ETH_Exported_Functions_Group1 Initialization and deinitialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the ETH peripheral: + + (+) User must Implement HAL_ETH_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO and NVIC ). + + (+) Call the function HAL_ETH_Init() to configure the selected device with + the selected configuration: + (++) MAC address + (++) Media interface (MII or RMII) + (++) Rx DMA Descriptors Tab + (++) Tx DMA Descriptors Tab + (++) Length of Rx Buffers + + (+) Call the function HAL_ETH_DeInit() to restore the default configuration + of the selected ETH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the Ethernet peripheral registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth) +{ + uint32_t tickstart; + + if (heth == NULL) + { + return HAL_ERROR; + } + if (heth->gState == HAL_ETH_STATE_RESET) + { + heth->gState = HAL_ETH_STATE_BUSY; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + + ETH_InitCallbacksToDefault(heth); + + if (heth->MspInitCallback == NULL) + { + heth->MspInitCallback = HAL_ETH_MspInit; + } + + /* Init the low level hardware */ + heth->MspInitCallback(heth); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC. */ + HAL_ETH_MspInit(heth); + +#endif /* (USE_HAL_ETH_REGISTER_CALLBACKS) */ + } + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + if (heth->Init.MediaInterface == HAL_ETH_MII_MODE) + { + HAL_SYSCFG_ETHInterfaceSelect(SYSCFG_ETH_MII); + } + else + { + HAL_SYSCFG_ETHInterfaceSelect(SYSCFG_ETH_RMII); + } + + /* Dummy read to sync with ETH */ + (void)SYSCFG->PMCR; + + /* Ethernet Software reset */ + /* Set the SWR bit: resets all MAC subsystem internal registers and logic */ + /* After reset all the registers holds their respective reset values */ + SET_BIT(heth->Instance->DMAMR, ETH_DMAMR_SWR); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for software reset */ + while (READ_BIT(heth->Instance->DMAMR, ETH_DMAMR_SWR) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_SWRESET_TIMEOUT)) + { + /* Set Error Code */ + heth->ErrorCode = HAL_ETH_ERROR_TIMEOUT; + /* Set State as Error */ + heth->gState = HAL_ETH_STATE_ERROR; + /* Return Error */ + return HAL_ERROR; + } + } + + /*------------------ MDIO CSR Clock Range Configuration --------------------*/ + HAL_ETH_SetMDIOClockRange(heth); + + /*------------------ MAC LPI 1US Tic Counter Configuration --------------------*/ + WRITE_REG(heth->Instance->MAC1USTCR, (((uint32_t)HAL_RCC_GetHCLKFreq() / ETH_MAC_US_TICK) - 1U)); + + /*------------------ MAC, MTL and DMA default Configuration ----------------*/ + ETH_MACDMAConfig(heth); + + /* SET DSL to 64 bit */ + MODIFY_REG(heth->Instance->DMACCR, ETH_DMACCR_DSL, ETH_DMACCR_DSL_64BIT); + + /* Set Receive Buffers Length (must be a multiple of 4) */ + if ((heth->Init.RxBuffLen % 0x4U) != 0x0U) + { + /* Set Error Code */ + heth->ErrorCode = HAL_ETH_ERROR_PARAM; + /* Set State as Error */ + heth->gState = HAL_ETH_STATE_ERROR; + /* Return Error */ + return HAL_ERROR; + } + else + { + MODIFY_REG(heth->Instance->DMACRCR, ETH_DMACRCR_RBSZ, ((heth->Init.RxBuffLen) << 1)); + } + + /*------------------ DMA Tx Descriptors Configuration ----------------------*/ + ETH_DMATxDescListInit(heth); + + /*------------------ DMA Rx Descriptors Configuration ----------------------*/ + ETH_DMARxDescListInit(heth); + + /*--------------------- ETHERNET MAC Address Configuration ------------------*/ + /* Set MAC addr bits 32 to 47 */ + heth->Instance->MACA0HR = (((uint32_t)(heth->Init.MACAddr[5]) << 8) | (uint32_t)heth->Init.MACAddr[4]); + /* Set MAC addr bits 0 to 31 */ + heth->Instance->MACA0LR = (((uint32_t)(heth->Init.MACAddr[3]) << 24) | ((uint32_t)(heth->Init.MACAddr[2]) << 16) | + ((uint32_t)(heth->Init.MACAddr[1]) << 8) | (uint32_t)heth->Init.MACAddr[0]); + + /* Disable Rx MMC Interrupts */ + SET_BIT(heth->Instance->MMCRIMR, ETH_MMCRIMR_RXLPITRCIM | ETH_MMCRIMR_RXLPIUSCIM | \ + ETH_MMCRIMR_RXUCGPIM | ETH_MMCRIMR_RXALGNERPIM | ETH_MMCRIMR_RXCRCERPIM); + + /* Disable Tx MMC Interrupts */ + SET_BIT(heth->Instance->MMCTIMR, ETH_MMCTIMR_TXLPITRCIM | ETH_MMCTIMR_TXLPIUSCIM | \ + ETH_MMCTIMR_TXGPKTIM | ETH_MMCTIMR_TXMCOLGPIM | ETH_MMCTIMR_TXSCOLGPIM); + + heth->ErrorCode = HAL_ETH_ERROR_NONE; + heth->gState = HAL_ETH_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the ETH peripheral. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth) +{ + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + + if (heth->MspDeInitCallback == NULL) + { + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + } + /* DeInit the low level hardware */ + heth->MspDeInitCallback(heth); +#else + + /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */ + HAL_ETH_MspDeInit(heth); + +#endif /* (USE_HAL_ETH_REGISTER_CALLBACKS) */ + + /* Set ETH HAL state to Disabled */ + heth->gState = HAL_ETH_STATE_RESET; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the ETH MSP. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes ETH MSP. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ETH Callback + * To be used instead of the weak predefined callback + * @param heth eth handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_ETH_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_ETH_PMT_CB_ID Power Management Callback ID + * @arg @ref HAL_ETH_EEE_CB_ID EEE Callback ID + * @arg @ref HAL_ETH_WAKEUP_CB_ID Wake UP Callback ID + * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_ETH_RegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID, + pETH_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + switch (CallbackID) + { + case HAL_ETH_TX_COMPLETE_CB_ID : + heth->TxCpltCallback = pCallback; + break; + + case HAL_ETH_RX_COMPLETE_CB_ID : + heth->RxCpltCallback = pCallback; + break; + + case HAL_ETH_ERROR_CB_ID : + heth->ErrorCallback = pCallback; + break; + + case HAL_ETH_PMT_CB_ID : + heth->PMTCallback = pCallback; + break; + + case HAL_ETH_EEE_CB_ID : + heth->EEECallback = pCallback; + break; + + case HAL_ETH_WAKEUP_CB_ID : + heth->WakeUpCallback = pCallback; + break; + + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = pCallback; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (heth->gState == HAL_ETH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = pCallback; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an ETH Callback + * ETH callback is redirected to the weak predefined callback + * @param heth eth handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ETH_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_ETH_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_ETH_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_ETH_PMT_CB_ID Power Management Callback ID + * @arg @ref HAL_ETH_EEE_CB_ID EEE Callback ID + * @arg @ref HAL_ETH_WAKEUP_CB_ID Wake UP Callback ID + * @arg @ref HAL_ETH_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_ETH_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterCallback(ETH_HandleTypeDef *heth, HAL_ETH_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (heth->gState == HAL_ETH_STATE_READY) + { + switch (CallbackID) + { + case HAL_ETH_TX_COMPLETE_CB_ID : + heth->TxCpltCallback = HAL_ETH_TxCpltCallback; + break; + + case HAL_ETH_RX_COMPLETE_CB_ID : + heth->RxCpltCallback = HAL_ETH_RxCpltCallback; + break; + + case HAL_ETH_ERROR_CB_ID : + heth->ErrorCallback = HAL_ETH_ErrorCallback; + break; + + case HAL_ETH_PMT_CB_ID : + heth->PMTCallback = HAL_ETH_PMTCallback; + break; + + case HAL_ETH_EEE_CB_ID : + heth->EEECallback = HAL_ETH_EEECallback; + break; + + case HAL_ETH_WAKEUP_CB_ID : + heth->WakeUpCallback = HAL_ETH_WakeUpCallback; + break; + + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = HAL_ETH_MspInit; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (heth->gState == HAL_ETH_STATE_RESET) + { + switch (CallbackID) + { + case HAL_ETH_MSPINIT_CB_ID : + heth->MspInitCallback = HAL_ETH_MspInit; + break; + + case HAL_ETH_MSPDEINIT_CB_ID : + heth->MspDeInitCallback = HAL_ETH_MspDeInit; + break; + + default : + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + heth->ErrorCode |= HAL_ETH_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group2 IO operation functions + * @brief ETH Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the ETH + data transfer. + +@endverbatim + * @{ + */ + +/** + * @brief Enables Ethernet MAC and DMA reception and transmission + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_READY) + { + heth->gState = HAL_ETH_STATE_BUSY; + + /* Set number of descriptors to build */ + heth->RxDescList.RxBuildDescCnt = ETH_RX_DESC_CNT; + + /* Build all descriptors */ + ETH_UpdateDescriptor(heth); + + /* Enable the MAC transmission */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Enable the MAC reception */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Enable the DMA transmission */ + SET_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Enable the DMA reception */ + SET_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Clear Tx and Rx process stopped flags */ + heth->Instance->DMACSR |= (ETH_DMACSR_TPS | ETH_DMACSR_RPS); + + heth->gState = HAL_ETH_STATE_STARTED; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enables Ethernet MAC and DMA reception/transmission in Interrupt mode + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Start_IT(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_READY) + { + heth->gState = HAL_ETH_STATE_BUSY; + + /* save IT mode to ETH Handle */ + heth->RxDescList.ItMode = 1U; + + /* Set number of descriptors to build */ + heth->RxDescList.RxBuildDescCnt = ETH_RX_DESC_CNT; + + /* Build all descriptors */ + ETH_UpdateDescriptor(heth); + + /* Enable the DMA transmission */ + SET_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Enable the DMA reception */ + SET_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Clear Tx and Rx process stopped flags */ + heth->Instance->DMACSR |= (ETH_DMACSR_TPS | ETH_DMACSR_RPS); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Enable the MAC transmission */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Enable the MAC reception */ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Enable ETH DMA interrupts: + - Tx complete interrupt + - Rx complete interrupt + - Fatal bus interrupt + */ + __HAL_ETH_DMA_ENABLE_IT(heth, (ETH_DMACIER_NIE | ETH_DMACIER_RIE | ETH_DMACIER_TIE | + ETH_DMACIER_FBEE | ETH_DMACIER_AIE | ETH_DMACIER_RBUE)); + + heth->gState = HAL_ETH_STATE_STARTED; + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Stop Ethernet MAC and DMA reception/transmission + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth) +{ + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + + /* Disable the DMA transmission */ + CLEAR_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Disable the DMA reception */ + CLEAR_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Disable the MAC reception */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Disable the MAC transmission */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + heth->gState = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Stop Ethernet MAC and DMA reception/transmission in Interrupt mode + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Stop_IT(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmarxdesc; + uint32_t descindex; + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Set the ETH peripheral state to BUSY */ + heth->gState = HAL_ETH_STATE_BUSY; + + /* Disable interrupts: + - Tx complete interrupt + - Rx complete interrupt + - Fatal bus interrupt + */ + __HAL_ETH_DMA_DISABLE_IT(heth, (ETH_DMACIER_NIE | ETH_DMACIER_RIE | ETH_DMACIER_TIE | + ETH_DMACIER_FBEE | ETH_DMACIER_AIE | ETH_DMACIER_RBUE)); + + /* Disable the DMA transmission */ + CLEAR_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_ST); + + /* Disable the DMA reception */ + CLEAR_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_SR); + + /* Disable the MAC reception */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_RE); + + /* Set the Flush Transmit FIFO bit */ + SET_BIT(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_FTQ); + + /* Disable the MAC transmission */ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_TE); + + /* Clear IOC bit to all Rx descriptors */ + for (descindex = 0; descindex < (uint32_t)ETH_RX_DESC_CNT; descindex++) + { + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descindex]; + CLEAR_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCRF_IOC); + } + + heth->RxDescList.ItMode = 0U; + + heth->gState = HAL_ETH_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sends an Ethernet Packet in polling mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Hold the configuration of packet to be transmitted + * @param Timeout: timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Transmit(ETH_HandleTypeDef *heth, ETH_TxPacketConfigTypeDef *pTxConfig, uint32_t Timeout) +{ + uint32_t tickstart; + ETH_DMADescTypeDef *dmatxdesc; + + if (pTxConfig == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Config DMA Tx descriptor by Tx Packet info */ + if (ETH_Prepare_Tx_Descriptors(heth, pTxConfig, 0) != HAL_ETH_ERROR_NONE) + { + /* Set the ETH error code */ + heth->ErrorCode |= HAL_ETH_ERROR_BUSY; + return HAL_ERROR; + } + + /* Ensure completion of descriptor preparation before transmission start */ + __DSB(); + + dmatxdesc = (ETH_DMADescTypeDef *)(&heth->TxDescList)->TxDesc[heth->TxDescList.CurTxDesc]; + + /* Incr current tx desc index */ + INCR_TX_DESC_INDEX(heth->TxDescList.CurTxDesc, 1U); + + /* Start transmission */ + /* issue a poll command to Tx DMA by writing address of next immediate free descriptor */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t)(heth->TxDescList.TxDesc[heth->TxDescList.CurTxDesc])); + + tickstart = HAL_GetTick(); + + /* Wait for data to be transmitted or timeout occurred */ + while ((dmatxdesc->DESC3 & ETH_DMATXNDESCWBF_OWN) != (uint32_t)RESET) + { + if ((heth->Instance->DMACSR & ETH_DMACSR_FBE) != (uint32_t)RESET) + { + heth->ErrorCode |= HAL_ETH_ERROR_DMA; + heth->DMAErrorCode = heth->Instance->DMACSR; + /* Return function status */ + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + heth->ErrorCode |= HAL_ETH_ERROR_TIMEOUT; + /* Clear TX descriptor so that we can proceed */ + dmatxdesc->DESC3 = (ETH_DMATXNDESCWBF_FD | ETH_DMATXNDESCWBF_LD); + return HAL_ERROR; + } + } + } + + /* Return function status */ + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sends an Ethernet Packet in interrupt mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Hold the configuration of packet to be transmitted + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_Transmit_IT(ETH_HandleTypeDef *heth, ETH_TxPacketConfigTypeDef *pTxConfig) +{ + if (pTxConfig == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_STARTED) + { + /* Save the packet pointer to release. */ + heth->TxDescList.CurrentPacketAddress = (uint32_t *)pTxConfig->pData; + + /* Config DMA Tx descriptor by Tx Packet info */ + if (ETH_Prepare_Tx_Descriptors(heth, pTxConfig, 1) != HAL_ETH_ERROR_NONE) + { + heth->ErrorCode |= HAL_ETH_ERROR_BUSY; + return HAL_ERROR; + } + + /* Ensure completion of descriptor preparation before transmission start */ + __DSB(); + + /* Incr current tx desc index */ + INCR_TX_DESC_INDEX(heth->TxDescList.CurTxDesc, 1U); + + /* Start transmission */ + /* issue a poll command to Tx DMA by writing address of next immediate free descriptor */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t)(heth->TxDescList.TxDesc[heth->TxDescList.CurTxDesc])); + + return HAL_OK; + + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Read a received packet. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pAppBuff: Pointer to an application buffer to receive the packet. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReadData(ETH_HandleTypeDef *heth, void **pAppBuff) +{ + uint32_t descidx; + ETH_DMADescTypeDef *dmarxdesc; + uint32_t desccnt = 0U; + uint32_t desccntmax; + uint32_t bufflength; + uint8_t rxdataready = 0U; + + if (pAppBuff == NULL) + { + heth->ErrorCode |= HAL_ETH_ERROR_PARAM; + return HAL_ERROR; + } + + if (heth->gState != HAL_ETH_STATE_STARTED) + { + return HAL_ERROR; + } + + descidx = heth->RxDescList.RxDescIdx; + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccntmax = ETH_RX_DESC_CNT - heth->RxDescList.RxBuildDescCnt; + + /* Check if descriptor is not owned by DMA */ + while ((READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_OWN) == (uint32_t)RESET) && (desccnt < desccntmax) + && (rxdataready == 0U)) + { + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_CTXT) != (uint32_t)RESET) + { + /* Get timestamp high */ + heth->RxDescList.TimeStamp.TimeStampHigh = dmarxdesc->DESC1; + /* Get timestamp low */ + heth->RxDescList.TimeStamp.TimeStampLow = dmarxdesc->DESC0; + } + if ((READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_FD) != (uint32_t)RESET) || (heth->RxDescList.pRxStart != NULL)) + { + /* Check if first descriptor */ + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_FD) != (uint32_t)RESET) + { + heth->RxDescList.RxDescCnt = 0; + heth->RxDescList.RxDataLength = 0; + } + + /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */ + bufflength = READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_PL) - heth->RxDescList.RxDataLength; + + /* Check if last descriptor */ + if (READ_BIT(dmarxdesc->DESC3, ETH_DMARXNDESCWBF_LD) != (uint32_t)RESET) + { + /* Save Last descriptor index */ + heth->RxDescList.pRxLastRxDesc = dmarxdesc->DESC3; + + /* Packet ready */ + rxdataready = 1; + } + + /* Link data */ +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Link callback*/ + heth->rxLinkCallback(&heth->RxDescList.pRxStart, &heth->RxDescList.pRxEnd, + (uint8_t *)dmarxdesc->BackupAddr0, bufflength); +#else + /* Link callback */ + HAL_ETH_RxLinkCallback(&heth->RxDescList.pRxStart, &heth->RxDescList.pRxEnd, + (uint8_t *)dmarxdesc->BackupAddr0, (uint16_t) bufflength); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + heth->RxDescList.RxDescCnt++; + heth->RxDescList.RxDataLength += bufflength; + + /* Clear buffer pointer */ + dmarxdesc->BackupAddr0 = 0; + } + + /* Increment current rx descriptor index */ + INCR_RX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccnt++; + } + + heth->RxDescList.RxBuildDescCnt += desccnt; + if ((heth->RxDescList.RxBuildDescCnt) != 0U) + { + /* Update Descriptors */ + ETH_UpdateDescriptor(heth); + } + + heth->RxDescList.RxDescIdx = descidx; + + if (rxdataready == 1U) + { + /* Return received packet */ + *pAppBuff = heth->RxDescList.pRxStart; + /* Reset first element */ + heth->RxDescList.pRxStart = NULL; + + return HAL_OK; + } + + /* Packet not ready */ + return HAL_ERROR; +} + +/** + * @brief This function gives back Rx Desc of the last received Packet + * to the DMA, so ETH DMA will be able to use these descriptors + * to receive next Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +static void ETH_UpdateDescriptor(ETH_HandleTypeDef *heth) +{ + uint32_t descidx; + uint32_t tailidx; + uint32_t desccount; + ETH_DMADescTypeDef *dmarxdesc; + uint8_t *buff = NULL; + uint8_t allocStatus = 1U; + + descidx = heth->RxDescList.RxBuildDescIdx; + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccount = heth->RxDescList.RxBuildDescCnt; + + while ((desccount > 0U) && (allocStatus != 0U)) + { + /* Check if a buffer's attached the descriptor */ + if (READ_REG(dmarxdesc->BackupAddr0) == 0U) + { + /* Get a new buffer. */ +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Allocate callback*/ + heth->rxAllocateCallback(&buff); +#else + /* Allocate callback */ + HAL_ETH_RxAllocateCallback(&buff); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + if (buff == NULL) + { + allocStatus = 0U; + } + else + { + WRITE_REG(dmarxdesc->BackupAddr0, (uint32_t)buff); + WRITE_REG(dmarxdesc->DESC0, (uint32_t)buff); + } + } + + if (allocStatus != 0U) + { + + if (heth->RxDescList.ItMode != 0U) + { + WRITE_REG(dmarxdesc->DESC3, ETH_DMARXNDESCRF_OWN | ETH_DMARXNDESCRF_BUF1V | ETH_DMARXNDESCRF_IOC); + } + else + { + WRITE_REG(dmarxdesc->DESC3, ETH_DMARXNDESCRF_OWN | ETH_DMARXNDESCRF_BUF1V); + } + + /* Increment current rx descriptor index */ + INCR_RX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmarxdesc = (ETH_DMADescTypeDef *)heth->RxDescList.RxDesc[descidx]; + desccount--; + } + } + + if (heth->RxDescList.RxBuildDescCnt != desccount) + { + /* Set the tail pointer index */ + tailidx = (descidx + 1U) % ETH_RX_DESC_CNT; + + /* DMB instruction to avoid race condition */ + __DMB(); + + /* Set the Tail pointer address */ + WRITE_REG(heth->Instance->DMACRDTPR, ((uint32_t)(heth->Init.RxDesc + (tailidx)))); + + heth->RxDescList.RxBuildDescIdx = descidx; + heth->RxDescList.RxBuildDescCnt = desccount; + } +} + +/** + * @brief Register the Rx alloc callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param rxAllocateCallback: pointer to function to alloc buffer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterRxAllocateCallback(ETH_HandleTypeDef *heth, + pETH_rxAllocateCallbackTypeDef rxAllocateCallback) +{ + if (rxAllocateCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to allocate buffer */ + heth->rxAllocateCallback = rxAllocateCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Rx alloc callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterRxAllocateCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->rxAllocateCallback = HAL_ETH_RxAllocateCallback; + + return HAL_OK; +} + +/** + * @brief Rx Allocate callback. + * @param buff: pointer to allocated buffer + * @retval None + */ +__weak void HAL_ETH_RxAllocateCallback(uint8_t **buff) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxAllocateCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Link callback. + * @param pStart: pointer to packet start + * @param pEnd: pointer to packet end + * @param buff: pointer to received data + * @param Length: received data length + * @retval None + */ +__weak void HAL_ETH_RxLinkCallback(void **pStart, void **pEnd, uint8_t *buff, uint16_t Length) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(pStart); + UNUSED(pEnd); + UNUSED(buff); + UNUSED(Length); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxLinkCallback could be implemented in the user file + */ +} + +/** + * @brief Set the Rx link data function. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param rxLinkCallback: pointer to function to link data + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterRxLinkCallback(ETH_HandleTypeDef *heth, pETH_rxLinkCallbackTypeDef rxLinkCallback) +{ + if (rxLinkCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to link data */ + heth->rxLinkCallback = rxLinkCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Rx link callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterRxLinkCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->rxLinkCallback = HAL_ETH_RxLinkCallback; + + return HAL_OK; +} + +/** + * @brief Get the error state of the last received packet. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pErrorCode: pointer to uint32_t to hold the error code + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_GetRxDataErrorCode(const ETH_HandleTypeDef *heth, uint32_t *pErrorCode) +{ + /* Get error bits. */ + *pErrorCode = READ_BIT(heth->RxDescList.pRxLastRxDesc, ETH_DMARXNDESCWBF_ERRORS_MASK); + + return HAL_OK; +} + +/** + * @brief Set the Tx free function. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param txFreeCallback: pointer to function to release the packet + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterTxFreeCallback(ETH_HandleTypeDef *heth, pETH_txFreeCallbackTypeDef txFreeCallback) +{ + if (txFreeCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + + /* Set function to free transmmitted packet */ + heth->txFreeCallback = txFreeCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Tx free callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterTxFreeCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->txFreeCallback = HAL_ETH_TxFreeCallback; + + return HAL_OK; +} + +/** + * @brief Tx Free callback. + * @param buff: pointer to buffer to free + * @retval None + */ +__weak void HAL_ETH_TxFreeCallback(uint32_t *buff) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxFreeCallback could be implemented in the user file + */ +} + +/** + * @brief Release transmitted Tx packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReleaseTxPacket(ETH_HandleTypeDef *heth) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t numOfBuf = dmatxdesclist->BuffersInUse; + uint32_t idx = dmatxdesclist->releaseIndex; + uint8_t pktTxStatus = 1U; + uint8_t pktInUse; +#ifdef HAL_ETH_USE_PTP + ETH_TimeStampTypeDef *timestamp = &heth->TxTimestamp; +#endif /* HAL_ETH_USE_PTP */ + + /* Loop through buffers in use. */ + while ((numOfBuf != 0U) && (pktTxStatus != 0U)) + { + pktInUse = 1U; + numOfBuf--; + /* If no packet, just examine the next packet. */ + if (dmatxdesclist->PacketAddress[idx] == NULL) + { + /* No packet in use, skip to next. */ + INCR_TX_DESC_INDEX(idx, 1U); + pktInUse = 0U; + } + + if (pktInUse != 0U) + { + /* Determine if the packet has been transmitted. */ + if ((heth->Init.TxDesc[idx].DESC3 & ETH_DMATXNDESCRF_OWN) == 0U) + { +#ifdef HAL_ETH_USE_PTP + + /* Disable Ptp transmission */ + CLEAR_BIT(heth->Init.TxDesc[idx].DESC3, (0x40000000U)); + + if ((heth->Init.TxDesc[idx].DESC3 & ETH_DMATXNDESCWBF_LD) + && (heth->Init.TxDesc[idx].DESC3 & ETH_DMATXNDESCWBF_TTSS)) + { + /* Get timestamp low */ + timestamp->TimeStampLow = heth->Init.TxDesc[idx].DESC0; + /* Get timestamp high */ + timestamp->TimeStampHigh = heth->Init.TxDesc[idx].DESC1; + } + else + { + timestamp->TimeStampHigh = timestamp->TimeStampLow = UINT32_MAX; + } +#endif /* HAL_ETH_USE_PTP */ + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered callbacks*/ +#ifdef HAL_ETH_USE_PTP + /* Handle Ptp */ + if (timestamp->TimeStampHigh != UINT32_MAX && timestamp->TimeStampLow != UINT32_MAX) + { + heth->txPtpCallback(dmatxdesclist->PacketAddress[idx], timestamp); + } +#endif /* HAL_ETH_USE_PTP */ + /* Release the packet. */ + heth->txFreeCallback(dmatxdesclist->PacketAddress[idx]); +#else + /* Call callbacks */ +#ifdef HAL_ETH_USE_PTP + /* Handle Ptp */ + if (timestamp->TimeStampHigh != UINT32_MAX && timestamp->TimeStampLow != UINT32_MAX) + { + HAL_ETH_TxPtpCallback(dmatxdesclist->PacketAddress[idx], timestamp); + } +#endif /* HAL_ETH_USE_PTP */ + /* Release the packet. */ + HAL_ETH_TxFreeCallback(dmatxdesclist->PacketAddress[idx]); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + /* Clear the entry in the in-use array. */ + dmatxdesclist->PacketAddress[idx] = NULL; + + /* Update the transmit relesae index and number of buffers in use. */ + INCR_TX_DESC_INDEX(idx, 1U); + dmatxdesclist->BuffersInUse = numOfBuf; + dmatxdesclist->releaseIndex = idx; + } + else + { + /* Get out of the loop! */ + pktTxStatus = 0U; + } + } + } + return HAL_OK; +} + +#ifdef HAL_ETH_USE_PTP +/** + * @brief Set the Ethernet PTP configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ptpconfig: pointer to a ETH_PTP_ConfigTypeDef structure that contains + * the configuration information for PTP + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_SetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig) +{ + uint32_t tmpTSCR; + ETH_TimeTypeDef time; + + if (ptpconfig == NULL) + { + return HAL_ERROR; + } + + tmpTSCR = ptpconfig->Timestamp | + ((uint32_t)ptpconfig->TimestampUpdate << ETH_MACTSCR_TSUPDT_Pos) | + ((uint32_t)ptpconfig->TimestampAll << ETH_MACTSCR_TSENALL_Pos) | + ((uint32_t)ptpconfig->TimestampRolloverMode << ETH_MACTSCR_TSCTRLSSR_Pos) | + ((uint32_t)ptpconfig->TimestampV2 << ETH_MACTSCR_TSVER2ENA_Pos) | + ((uint32_t)ptpconfig->TimestampEthernet << ETH_MACTSCR_TSIPENA_Pos) | + ((uint32_t)ptpconfig->TimestampIPv6 << ETH_MACTSCR_TSIPV6ENA_Pos) | + ((uint32_t)ptpconfig->TimestampIPv4 << ETH_MACTSCR_TSIPV4ENA_Pos) | + ((uint32_t)ptpconfig->TimestampEvent << ETH_MACTSCR_TSEVNTENA_Pos) | + ((uint32_t)ptpconfig->TimestampMaster << ETH_MACTSCR_TSMSTRENA_Pos) | + ((uint32_t)ptpconfig->TimestampSnapshots << ETH_MACTSCR_SNAPTYPSEL_Pos) | + ((uint32_t)ptpconfig->TimestampFilter << ETH_MACTSCR_TSENMACADDR_Pos) | + ((uint32_t)ptpconfig->TimestampChecksumCorrection << ETH_MACTSCR_CSC_Pos) | + ((uint32_t)ptpconfig->TimestampStatusMode << ETH_MACTSCR_TXTSSTSM_Pos); + + /* Write to MACTSCR */ + MODIFY_REG(heth->Instance->MACTSCR, ETH_MACTSCR_MASK, tmpTSCR); + + /* Enable Timestamp */ + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSENA); + WRITE_REG(heth->Instance->MACSSIR, ptpconfig->TimestampSubsecondInc); + WRITE_REG(heth->Instance->MACTSAR, ptpconfig->TimestampAddend); + + /* Enable Timestamp */ + if (ptpconfig->TimestampAddendUpdate == ENABLE) + { + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSADDREG); + while ((heth->Instance->MACTSCR & ETH_MACTSCR_TSADDREG) != 0) + { + + } + } + + /* Ptp Init */ + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSINIT); + + /* Set PTP Configuration done */ + heth->IsPtpConfigured = HAL_ETH_PTP_CONFIGURED; + + /* Set Seconds */ + time.Seconds = heth->Instance->MACSTSR; + /* Set NanoSeconds */ + time.NanoSeconds = heth->Instance->MACSTNR; + + HAL_ETH_PTP_SetTime(heth, &time); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Get the Ethernet PTP configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ptpconfig: pointer to a ETH_PTP_ConfigTypeDef structure that contains + * the configuration information for PTP + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetConfig(ETH_HandleTypeDef *heth, ETH_PTP_ConfigTypeDef *ptpconfig) +{ + if (ptpconfig == NULL) + { + return HAL_ERROR; + } + ptpconfig->Timestamp = READ_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSENA); + ptpconfig->TimestampUpdate = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSCFUPDT) >> ETH_MACTSCR_TSUPDT_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampAll = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSENALL) >> ETH_MACTSCR_TSENALL_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampRolloverMode = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSCTRLSSR) >> ETH_MACTSCR_TSCTRLSSR_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampV2 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSVER2ENA) >> ETH_MACTSCR_TSVER2ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampEthernet = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPENA) >> ETH_MACTSCR_TSIPENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampIPv6 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPV6ENA) >> ETH_MACTSCR_TSIPV6ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampIPv4 = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSIPV4ENA) >> ETH_MACTSCR_TSIPV4ENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampEvent = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSEVNTENA) >> ETH_MACTSCR_TSEVNTENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampMaster = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSMSTRENA) >> ETH_MACTSCR_TSMSTRENA_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampSnapshots = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_SNAPTYPSEL) >> ETH_MACTSCR_SNAPTYPSEL_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampFilter = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TSENMACADDR) >> ETH_MACTSCR_TSENMACADDR_Pos) > 0U) + ? ENABLE : DISABLE; + ptpconfig->TimestampChecksumCorrection = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_CSC) >> ETH_MACTSCR_CSC_Pos) > 0U) ? ENABLE : DISABLE; + ptpconfig->TimestampStatusMode = ((READ_BIT(heth->Instance->MACTSCR, + ETH_MACTSCR_TXTSSTSM) >> ETH_MACTSCR_TXTSSTSM_Pos) > 0U) + ? ENABLE : DISABLE; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set Seconds and Nanoseconds for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param time: pointer to a ETH_TimeTypeDef structure that contains + * time to set + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_SetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Set Seconds */ + heth->Instance->MACSTSUR = time->Seconds; + + /* Set NanoSeconds */ + heth->Instance->MACSTNUR = time->NanoSeconds; + + /* the system time is updated */ + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSUPDT); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get Seconds and Nanoseconds for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param time: pointer to a ETH_TimeTypeDef structure that contains + * time to get + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetTime(ETH_HandleTypeDef *heth, ETH_TimeTypeDef *time) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Get Seconds */ + time->Seconds = heth->Instance->MACSTSR; + /* Get NanoSeconds */ + time->NanoSeconds = heth->Instance->MACSTNR; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Update time for the Ethernet PTP registers. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timeoffset: pointer to a ETH_PtpUpdateTypeDef structure that contains + * the time update information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_AddTimeOffset(ETH_HandleTypeDef *heth, ETH_PtpUpdateTypeDef ptpoffsettype, + ETH_TimeTypeDef *timeoffset) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + if (ptpoffsettype == HAL_ETH_PTP_NEGATIVE_UPDATE) + { + /* Set Seconds update */ + heth->Instance->MACSTSUR = ETH_MACSTSUR_VALUE - timeoffset->Seconds + 1U; + + if (READ_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSCTRLSSR) == ETH_MACTSCR_TSCTRLSSR) + { + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = ETH_MACSTNUR_VALUE - timeoffset->NanoSeconds; + } + else + { + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = ETH_MACSTSUR_VALUE - timeoffset->NanoSeconds + 1U; + } + } + else + { + /* Set Seconds update */ + heth->Instance->MACSTSUR = timeoffset->Seconds; + /* Set nanoSeconds update */ + heth->Instance->MACSTNUR = timeoffset->NanoSeconds; + } + + SET_BIT(heth->Instance->MACTSCR, ETH_MACTSCR_TSUPDT); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Insert Timestamp in transmission. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_InsertTxTimestamp(ETH_HandleTypeDef *heth) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t descidx = dmatxdesclist->CurTxDesc; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Enable Time Stamp transmission */ + SET_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_TTSE); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get transmission timestamp. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timestamp: pointer to ETH_TIMESTAMPTypeDef structure that contains + * transmission timestamp + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetTxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t idx = dmatxdesclist->releaseIndex; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[idx]; + + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Get timestamp low */ + timestamp->TimeStampLow = dmatxdesc->DESC0; + /* Get timestamp high */ + timestamp->TimeStampHigh = dmatxdesc->DESC1; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Get receive timestamp. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param timestamp: pointer to ETH_TIMESTAMPTypeDef structure that contains + * receive timestamp + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_PTP_GetRxTimestamp(ETH_HandleTypeDef *heth, ETH_TimeStampTypeDef *timestamp) +{ + if (heth->IsPtpConfigured == HAL_ETH_PTP_CONFIGURED) + { + /* Get timestamp low */ + timestamp->TimeStampLow = heth->RxDescList.TimeStamp.TimeStampLow; + /* Get timestamp high */ + timestamp->TimeStampHigh = heth->RxDescList.TimeStamp.TimeStampHigh; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Register the Tx Ptp callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param txPtpCallback: Function to handle Ptp transmission + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_RegisterTxPtpCallback(ETH_HandleTypeDef *heth, pETH_txPtpCallbackTypeDef txPtpCallback) +{ + if (txPtpCallback == NULL) + { + /* No buffer to save */ + return HAL_ERROR; + } + /* Set Function to handle Tx Ptp */ + heth->txPtpCallback = txPtpCallback; + + return HAL_OK; +} + +/** + * @brief Unregister the Tx Ptp callback. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_UnRegisterTxPtpCallback(ETH_HandleTypeDef *heth) +{ + /* Set function to allocate buffer */ + heth->txPtpCallback = HAL_ETH_TxPtpCallback; + + return HAL_OK; +} + +/** + * @brief Tx Ptp callback. + * @param buff: pointer to application buffer + * @param timestamp: pointer to ETH_TimeStampTypeDef structure that contains + * transmission timestamp + * @retval None + */ +__weak void HAL_ETH_TxPtpCallback(uint32_t *buff, ETH_TimeStampTypeDef *timestamp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(buff); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxPtpCallback could be implemented in the user file + */ +} +#endif /* HAL_ETH_USE_PTP */ + +/** + * @brief This function handles ETH interrupt request. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth) +{ + uint32_t mac_flag = READ_REG(heth->Instance->MACISR); + uint32_t dma_flag = READ_REG(heth->Instance->DMACSR); + uint32_t dma_itsource = READ_REG(heth->Instance->DMACIER); + uint32_t exti_d1_flag = READ_REG(EXTI_D1->PR3); +#if defined(DUAL_CORE) + uint32_t exti_d2_flag = READ_REG(EXTI_D2->PR3); +#endif /* DUAL_CORE */ + + /* Packet received */ + if (((dma_flag & ETH_DMACSR_RI) != 0U) && ((dma_itsource & ETH_DMACIER_RIE) != 0U)) + { + /* Clear the Eth DMA Rx IT pending bits */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMACSR_RI | ETH_DMACSR_NIS); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Receive complete callback*/ + heth->RxCpltCallback(heth); +#else + /* Receive complete callback */ + HAL_ETH_RxCpltCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + + /* Packet transmitted */ + if (((dma_flag & ETH_DMACSR_TI) != 0U) && ((dma_itsource & ETH_DMACIER_TIE) != 0U)) + { + /* Clear the Eth DMA Tx IT pending bits */ + __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMACSR_TI | ETH_DMACSR_NIS); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /*Call registered Transmit complete callback*/ + heth->TxCpltCallback(heth); +#else + /* Transfer complete callback */ + HAL_ETH_TxCpltCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + + /* ETH DMA Error */ + if (((dma_flag & ETH_DMACSR_AIS) != 0U) && ((dma_itsource & ETH_DMACIER_AIE) != 0U)) + { + heth->ErrorCode |= HAL_ETH_ERROR_DMA; + /* if fatal bus error occurred */ + if ((dma_flag & ETH_DMACSR_FBE) != 0U) + { + /* Get DMA error code */ + heth->DMAErrorCode = READ_BIT(heth->Instance->DMACSR, (ETH_DMACSR_FBE | ETH_DMACSR_TPS | ETH_DMACSR_RPS)); + + /* Disable all interrupts */ + __HAL_ETH_DMA_DISABLE_IT(heth, ETH_DMACIER_NIE | ETH_DMACIER_AIE); + + /* Set HAL state to ERROR */ + heth->gState = HAL_ETH_STATE_ERROR; + } + else + { + /* Get DMA error status */ + heth->DMAErrorCode = READ_BIT(heth->Instance->DMACSR, (ETH_DMACSR_CDE | ETH_DMACSR_ETI | ETH_DMACSR_RWT | + ETH_DMACSR_RBU | ETH_DMACSR_AIS)); + + /* Clear the interrupt summary flag */ + __HAL_ETH_DMA_CLEAR_IT(heth, (ETH_DMACSR_CDE | ETH_DMACSR_ETI | ETH_DMACSR_RWT | + ETH_DMACSR_RBU | ETH_DMACSR_AIS)); + } +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered Error callback*/ + heth->ErrorCallback(heth); +#else + /* Ethernet DMA Error callback */ + HAL_ETH_ErrorCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + + /* ETH MAC Error IT */ + if (((mac_flag & ETH_MACIER_RXSTSIE) == ETH_MACIER_RXSTSIE) || \ + ((mac_flag & ETH_MACIER_TXSTSIE) == ETH_MACIER_TXSTSIE)) + { + heth->ErrorCode |= HAL_ETH_ERROR_MAC; + + /* Get MAC Rx Tx status and clear Status register pending bit */ + heth->MACErrorCode = READ_REG(heth->Instance->MACRXTXSR); + + heth->gState = HAL_ETH_STATE_ERROR; + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered Error callback*/ + heth->ErrorCallback(heth); +#else + /* Ethernet Error callback */ + HAL_ETH_ErrorCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + heth->MACErrorCode = (uint32_t)(0x0U); + } + + /* ETH PMT IT */ + if ((mac_flag & ETH_MAC_PMT_IT) != 0U) + { + /* Get MAC Wake-up source and clear the status register pending bit */ + heth->MACWakeUpEvent = READ_BIT(heth->Instance->MACPCSR, (ETH_MACPCSR_RWKPRCVD | ETH_MACPCSR_MGKPRCVD)); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered PMT callback*/ + heth->PMTCallback(heth); +#else + /* Ethernet PMT callback */ + HAL_ETH_PMTCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + heth->MACWakeUpEvent = (uint32_t)(0x0U); + } + + /* ETH EEE IT */ + if ((mac_flag & ETH_MAC_LPI_IT) != 0U) + { + /* Get MAC LPI interrupt source and clear the status register pending bit */ + heth->MACLPIEvent = READ_BIT(heth->Instance->MACLCSR, 0x0000000FU); + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered EEE callback*/ + heth->EEECallback(heth); +#else + /* Ethernet EEE callback */ + HAL_ETH_EEECallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + + heth->MACLPIEvent = (uint32_t)(0x0U); + } + +#if defined(DUAL_CORE) + if (HAL_GetCurrentCPUID() == CM7_CPUID) + { + /* check ETH WAKEUP exti flag */ + if ((exti_d1_flag & ETH_WAKEUP_EXTI_LINE) != 0U) + { + /* Clear ETH WAKEUP Exti pending bit */ + __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(ETH_WAKEUP_EXTI_LINE); +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered WakeUp callback*/ + heth->WakeUpCallback(heth); +#else + /* ETH WAKEUP callback */ + HAL_ETH_WakeUpCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + } + else + { + /* check ETH WAKEUP exti flag */ + if ((exti_d2_flag & ETH_WAKEUP_EXTI_LINE) != 0U) + { + /* Clear ETH WAKEUP Exti pending bit */ + __HAL_ETH_WAKEUP_EXTID2_CLEAR_FLAG(ETH_WAKEUP_EXTI_LINE); +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered WakeUp callback*/ + heth->WakeUpCallback(heth); +#else + /* ETH WAKEUP callback */ + HAL_ETH_WakeUpCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } + } +#else /* DUAL_CORE not defined */ + /* check ETH WAKEUP exti flag */ + if ((exti_d1_flag & ETH_WAKEUP_EXTI_LINE) != 0U) + { + /* Clear ETH WAKEUP Exti pending bit */ + __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG(ETH_WAKEUP_EXTI_LINE); +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) + /* Call registered WakeUp callback*/ + heth->WakeUpCallback(heth); +#else + /* ETH WAKEUP callback */ + HAL_ETH_WakeUpCallback(heth); +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + } +#endif /* DUAL_CORE */ +} + +/** + * @brief Tx Transfer completed callbacks. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Ethernet transfer error callbacks + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Ethernet Power Management module IT callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_PMTCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_PMTCallback could be implemented in the user file + */ +} + +/** + * @brief Energy Efficient Etherent IT callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_EEECallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_EEECallback could be implemented in the user file + */ +} + +/** + * @brief ETH WAKEUP interrupt callback + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +__weak void HAL_ETH_WakeUpCallback(ETH_HandleTypeDef *heth) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(heth); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_ETH_WakeUpCallback could be implemented in the user file + */ +} + +/** + * @brief Read a PHY register + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param PHYAddr: PHY port address, must be a value from 0 to 31 + * @param PHYReg: PHY register address, must be a value from 0 to 31 + * @param pRegValue: parameter to hold read value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t *pRegValue) +{ + uint32_t tickstart; + uint32_t tmpreg; + + /* Check for the Busy flag */ + if (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) != (uint32_t)RESET) + { + return HAL_ERROR; + } + + /* Get the MACMDIOAR value */ + WRITE_REG(tmpreg, heth->Instance->MACMDIOAR); + + /* Prepare the MDIO Address Register value + - Set the PHY device address + - Set the PHY register address + - Set the read mode + - Set the MII Busy bit */ + + MODIFY_REG(tmpreg, ETH_MACMDIOAR_PA, (PHYAddr << 21)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_RDA, (PHYReg << 16)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_MOC, ETH_MACMDIOAR_MOC_RD); + SET_BIT(tmpreg, ETH_MACMDIOAR_MB); + + /* Write the result value into the MDII Address register */ + WRITE_REG(heth->Instance->MACMDIOAR, tmpreg); + + tickstart = HAL_GetTick(); + + /* Wait for the Busy flag */ + while (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_MDIO_BUS_TIMEOUT)) + { + return HAL_ERROR; + } + } + + /* Get MACMIIDR value */ + WRITE_REG(*pRegValue, (uint16_t)heth->Instance->MACMDIODR); + + return HAL_OK; +} + +/** + * @brief Writes to a PHY register. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param PHYAddr: PHY port address, must be a value from 0 to 31 + * @param PHYReg: PHY register address, must be a value from 0 to 31 + * @param RegValue: the value to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_WritePHYRegister(const ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg, + uint32_t RegValue) +{ + uint32_t tickstart; + uint32_t tmpreg; + + /* Check for the Busy flag */ + if (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) != (uint32_t)RESET) + { + return HAL_ERROR; + } + + /* Get the MACMDIOAR value */ + WRITE_REG(tmpreg, heth->Instance->MACMDIOAR); + + /* Prepare the MDIO Address Register value + - Set the PHY device address + - Set the PHY register address + - Set the write mode + - Set the MII Busy bit */ + + MODIFY_REG(tmpreg, ETH_MACMDIOAR_PA, (PHYAddr << 21)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_RDA, (PHYReg << 16)); + MODIFY_REG(tmpreg, ETH_MACMDIOAR_MOC, ETH_MACMDIOAR_MOC_WR); + SET_BIT(tmpreg, ETH_MACMDIOAR_MB); + + /* Give the value to the MII data register */ + WRITE_REG(ETH->MACMDIODR, (uint16_t)RegValue); + + /* Write the result value into the MII Address register */ + WRITE_REG(ETH->MACMDIOAR, tmpreg); + + tickstart = HAL_GetTick(); + + /* Wait for the Busy flag */ + while (READ_BIT(heth->Instance->MACMDIOAR, ETH_MACMDIOAR_MB) > 0U) + { + if (((HAL_GetTick() - tickstart) > ETH_MDIO_BUS_TIMEOUT)) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions + * @brief ETH control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the ETH + peripheral. + +@endverbatim + * @{ + */ +/** + * @brief Get the configuration of the MAC and MTL subsystems. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param macconf: pointer to a ETH_MACConfigTypeDef structure that will hold + * the configuration of the MAC. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_ETH_GetMACConfig(const ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) +{ + if (macconf == NULL) + { + return HAL_ERROR; + } + + /* Get MAC parameters */ + macconf->PreambleLength = READ_BIT(heth->Instance->MACCR, ETH_MACCR_PRELEN); + macconf->DeferralCheck = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DC) >> 4) > 0U) ? ENABLE : DISABLE; + macconf->BackOffLimit = READ_BIT(heth->Instance->MACCR, ETH_MACCR_BL); + macconf->RetryTransmission = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DR) >> 8) == 0U) ? ENABLE : DISABLE; + macconf->CarrierSenseDuringTransmit = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DCRS) >> 9) > 0U) + ? ENABLE : DISABLE; + macconf->ReceiveOwn = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_DO) >> 10) == 0U) ? ENABLE : DISABLE; + macconf->CarrierSenseBeforeTransmit = ((READ_BIT(heth->Instance->MACCR, + ETH_MACCR_ECRSFD) >> 11) > 0U) ? ENABLE : DISABLE; + macconf->LoopbackMode = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_LM) >> 12) > 0U) ? ENABLE : DISABLE; + macconf->DuplexMode = READ_BIT(heth->Instance->MACCR, ETH_MACCR_DM); + macconf->Speed = READ_BIT(heth->Instance->MACCR, ETH_MACCR_FES); + macconf->JumboPacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_JE) >> 16) > 0U) ? ENABLE : DISABLE; + macconf->Jabber = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_JD) >> 17) == 0U) ? ENABLE : DISABLE; + macconf->Watchdog = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_WD) >> 19) == 0U) ? ENABLE : DISABLE; + macconf->AutomaticPadCRCStrip = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_ACS) >> 20) > 0U) ? ENABLE : DISABLE; + macconf->CRCStripTypePacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_CST) >> 21) > 0U) ? ENABLE : DISABLE; + macconf->Support2KPacket = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_S2KP) >> 22) > 0U) ? ENABLE : DISABLE; + macconf->GiantPacketSizeLimitControl = ((READ_BIT(heth->Instance->MACCR, + ETH_MACCR_GPSLCE) >> 23) > 0U) ? ENABLE : DISABLE; + macconf->InterPacketGapVal = READ_BIT(heth->Instance->MACCR, ETH_MACCR_IPG); + macconf->ChecksumOffload = ((READ_BIT(heth->Instance->MACCR, ETH_MACCR_IPC) >> 27) > 0U) ? ENABLE : DISABLE; + macconf->SourceAddrControl = READ_BIT(heth->Instance->MACCR, ETH_MACCR_SARC); + + macconf->GiantPacketSizeLimit = READ_BIT(heth->Instance->MACECR, ETH_MACECR_GPSL); + macconf->CRCCheckingRxPackets = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_DCRCC) >> 16) == 0U) ? ENABLE : DISABLE; + macconf->SlowProtocolDetect = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_SPEN) >> 17) > 0U) ? ENABLE : DISABLE; + macconf->UnicastSlowProtocolPacketDetect = ((READ_BIT(heth->Instance->MACECR, + ETH_MACECR_USP) >> 18) > 0U) ? ENABLE : DISABLE; + macconf->ExtendedInterPacketGap = ((READ_BIT(heth->Instance->MACECR, ETH_MACECR_EIPGEN) >> 24) > 0U) + ? ENABLE : DISABLE; + macconf->ExtendedInterPacketGapVal = READ_BIT(heth->Instance->MACECR, ETH_MACECR_EIPG) >> 25; + + macconf->ProgrammableWatchdog = ((READ_BIT(heth->Instance->MACWTR, ETH_MACWTR_PWE) >> 8) > 0U) ? ENABLE : DISABLE; + macconf->WatchdogTimeout = READ_BIT(heth->Instance->MACWTR, ETH_MACWTR_WTO); + + macconf->TransmitFlowControl = ((READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_TFE) >> 1) > 0U) ? ENABLE : DISABLE; + macconf->ZeroQuantaPause = ((READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_DZPQ) >> 7) == 0U) ? ENABLE : DISABLE; + macconf->PauseLowThreshold = READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_PLT); + macconf->PauseTime = (READ_BIT(heth->Instance->MACTFCR, ETH_MACTFCR_PT) >> 16); + macconf->ReceiveFlowControl = (READ_BIT(heth->Instance->MACRFCR, ETH_MACRFCR_RFE) > 0U) ? ENABLE : DISABLE; + macconf->UnicastPausePacketDetect = ((READ_BIT(heth->Instance->MACRFCR, ETH_MACRFCR_UP) >> 1) > 0U) + ? ENABLE : DISABLE; + + macconf->TransmitQueueMode = READ_BIT(heth->Instance->MTLTQOMR, (ETH_MTLTQOMR_TTC | ETH_MTLTQOMR_TSF)); + + macconf->ReceiveQueueMode = READ_BIT(heth->Instance->MTLRQOMR, (ETH_MTLRQOMR_RTC | ETH_MTLRQOMR_RSF)); + macconf->ForwardRxUndersizedGoodPacket = ((READ_BIT(heth->Instance->MTLRQOMR, + ETH_MTLRQOMR_FUP) >> 3) > 0U) ? ENABLE : DISABLE; + macconf->ForwardRxErrorPacket = ((READ_BIT(heth->Instance->MTLRQOMR, ETH_MTLRQOMR_FEP) >> 4) > 0U) ? ENABLE : DISABLE; + macconf->DropTCPIPChecksumErrorPacket = ((READ_BIT(heth->Instance->MTLRQOMR, + ETH_MTLRQOMR_DISTCPEF) >> 6) == 0U) ? ENABLE : DISABLE; + + return HAL_OK; +} + +/** + * @brief Get the configuration of the DMA. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param dmaconf: pointer to a ETH_DMAConfigTypeDef structure that will hold + * the configuration of the ETH DMA. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_ETH_GetDMAConfig(const ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) +{ + if (dmaconf == NULL) + { + return HAL_ERROR; + } + + dmaconf->AddressAlignedBeats = ((READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_AAL) >> 12) > 0U) ? ENABLE : DISABLE; + dmaconf->BurstMode = READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_FB | ETH_DMASBMR_MB); + dmaconf->RebuildINCRxBurst = ((READ_BIT(heth->Instance->DMASBMR, ETH_DMASBMR_RB) >> 15) > 0U) ? ENABLE : DISABLE; + + dmaconf->DMAArbitration = READ_BIT(heth->Instance->DMAMR, (ETH_DMAMR_TXPR | ETH_DMAMR_PR | ETH_DMAMR_DA)); + + dmaconf->PBLx8Mode = ((READ_BIT(heth->Instance->DMACCR, ETH_DMACCR_8PBL) >> 16) > 0U) ? ENABLE : DISABLE; + dmaconf->MaximumSegmentSize = READ_BIT(heth->Instance->DMACCR, ETH_DMACCR_MSS); + + dmaconf->FlushRxPacket = ((READ_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_RPF) >> 31) > 0U) ? ENABLE : DISABLE; + dmaconf->RxDMABurstLength = READ_BIT(heth->Instance->DMACRCR, ETH_DMACRCR_RPBL); + + dmaconf->SecondPacketOperate = ((READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_OSP) >> 4) > 0U) ? ENABLE : DISABLE; + dmaconf->TCPSegmentation = ((READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_TSE) >> 12) > 0U) ? ENABLE : DISABLE; + dmaconf->TxDMABurstLength = READ_BIT(heth->Instance->DMACTCR, ETH_DMACTCR_TPBL); + + return HAL_OK; +} + +/** + * @brief Set the MAC configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param macconf: pointer to a ETH_MACConfigTypeDef structure that contains + * the configuration of the MAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetMACConfig(ETH_HandleTypeDef *heth, ETH_MACConfigTypeDef *macconf) +{ + if (macconf == NULL) + { + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + ETH_SetMACConfig(heth, macconf); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Set the ETH DMA configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param dmaconf: pointer to a ETH_DMAConfigTypeDef structure that will hold + * the configuration of the ETH DMA. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetDMAConfig(ETH_HandleTypeDef *heth, ETH_DMAConfigTypeDef *dmaconf) +{ + if (dmaconf == NULL) + { + return HAL_ERROR; + } + + if (heth->gState == HAL_ETH_STATE_READY) + { + ETH_SetDMAConfig(heth, dmaconf); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configures the Clock range of ETH MDIO interface. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +void HAL_ETH_SetMDIOClockRange(ETH_HandleTypeDef *heth) +{ + uint32_t hclk; + uint32_t tmpreg; + + /* Get the ETHERNET MACMDIOAR value */ + tmpreg = (heth->Instance)->MACMDIOAR; + + /* Clear CSR Clock Range bits */ + tmpreg &= ~ETH_MACMDIOAR_CR; + + /* Get hclk frequency value */ + hclk = HAL_RCC_GetHCLKFreq(); + + /* Set CR bits depending on hclk value */ + if (hclk < 35000000U) + { + /* CSR Clock Range between 0-35 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV16; + } + else if (hclk < 60000000U) + { + /* CSR Clock Range between 35-60 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV26; + } + else if (hclk < 100000000U) + { + /* CSR Clock Range between 60-100 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV42; + } + else if (hclk < 150000000U) + { + /* CSR Clock Range between 100-150 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV62; + } + else if (hclk < 250000000U) + { + /* CSR Clock Range between 150-250 MHz */ + tmpreg |= (uint32_t)ETH_MACMDIOAR_CR_DIV102; + } + else /* (hclk >= 250000000U) */ + { + /* CSR Clock >= 250 MHz */ + tmpreg |= (uint32_t)(ETH_MACMDIOAR_CR_DIV124); + } + + /* Configure the CSR Clock Range */ + (heth->Instance)->MACMDIOAR = (uint32_t)tmpreg; +} + +/** + * @brief Set the ETH MAC (L2) Filters configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilterConfig: pointer to a ETH_MACFilterConfigTypeDef structure that contains + * the configuration of the ETH MAC filters. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetMACFilterConfig(ETH_HandleTypeDef *heth, const ETH_MACFilterConfigTypeDef *pFilterConfig) +{ + uint32_t filterconfig; + + if (pFilterConfig == NULL) + { + return HAL_ERROR; + } + + filterconfig = ((uint32_t)pFilterConfig->PromiscuousMode | + ((uint32_t)pFilterConfig->HashUnicast << 1) | + ((uint32_t)pFilterConfig->HashMulticast << 2) | + ((uint32_t)pFilterConfig->DestAddrInverseFiltering << 3) | + ((uint32_t)pFilterConfig->PassAllMulticast << 4) | + ((uint32_t)((pFilterConfig->BroadcastFilter == DISABLE) ? 1U : 0U) << 5) | + ((uint32_t)pFilterConfig->SrcAddrInverseFiltering << 8) | + ((uint32_t)pFilterConfig->SrcAddrFiltering << 9) | + ((uint32_t)pFilterConfig->HachOrPerfectFilter << 10) | + ((uint32_t)pFilterConfig->ReceiveAllMode << 31) | + pFilterConfig->ControlPacketsFilter); + + MODIFY_REG(heth->Instance->MACPFR, ETH_MACPFR_MASK, filterconfig); + + return HAL_OK; +} + +/** + * @brief Get the ETH MAC (L2) Filters configuration. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilterConfig: pointer to a ETH_MACFilterConfigTypeDef structure that will hold + * the configuration of the ETH MAC filters. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_GetMACFilterConfig(const ETH_HandleTypeDef *heth, ETH_MACFilterConfigTypeDef *pFilterConfig) +{ + if (pFilterConfig == NULL) + { + return HAL_ERROR; + } + + pFilterConfig->PromiscuousMode = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PR)) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HashUnicast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HUC) >> 1) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HashMulticast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HMC) >> 2) > 0U) ? ENABLE : DISABLE; + pFilterConfig->DestAddrInverseFiltering = ((READ_BIT(heth->Instance->MACPFR, + ETH_MACPFR_DAIF) >> 3) > 0U) ? ENABLE : DISABLE; + pFilterConfig->PassAllMulticast = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PM) >> 4) > 0U) ? ENABLE : DISABLE; + pFilterConfig->BroadcastFilter = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_DBF) >> 5) == 0U) ? ENABLE : DISABLE; + pFilterConfig->ControlPacketsFilter = READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_PCF); + pFilterConfig->SrcAddrInverseFiltering = ((READ_BIT(heth->Instance->MACPFR, + ETH_MACPFR_SAIF) >> 8) > 0U) ? ENABLE : DISABLE; + pFilterConfig->SrcAddrFiltering = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_SAF) >> 9) > 0U) ? ENABLE : DISABLE; + pFilterConfig->HachOrPerfectFilter = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_HPF) >> 10) > 0U) + ? ENABLE : DISABLE; + pFilterConfig->ReceiveAllMode = ((READ_BIT(heth->Instance->MACPFR, ETH_MACPFR_RA) >> 31) > 0U) ? ENABLE : DISABLE; + + return HAL_OK; +} + +/** + * @brief Set the source MAC Address to be matched. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param AddrNbr: The MAC address to configure + * This parameter must be a value of the following: + * ETH_MAC_ADDRESS1 + * ETH_MAC_ADDRESS2 + * ETH_MAC_ADDRESS3 + * @param pMACAddr: Pointer to MAC address buffer data (6 bytes) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetSourceMACAddrMatch(const ETH_HandleTypeDef *heth, uint32_t AddrNbr, + const uint8_t *pMACAddr) +{ + uint32_t macaddrlr; + uint32_t macaddrhr; + + if (pMACAddr == NULL) + { + return HAL_ERROR; + } + + /* Get mac addr high reg offset */ + macaddrhr = ((uint32_t) &(heth->Instance->MACA0HR) + AddrNbr); + /* Get mac addr low reg offset */ + macaddrlr = ((uint32_t) &(heth->Instance->MACA0LR) + AddrNbr); + + /* Set MAC addr bits 32 to 47 */ + (*(__IO uint32_t *)macaddrhr) = (((uint32_t)(pMACAddr[5]) << 8) | (uint32_t)pMACAddr[4]); + /* Set MAC addr bits 0 to 31 */ + (*(__IO uint32_t *)macaddrlr) = (((uint32_t)(pMACAddr[3]) << 24) | ((uint32_t)(pMACAddr[2]) << 16) | + ((uint32_t)(pMACAddr[1]) << 8) | (uint32_t)pMACAddr[0]); + + /* Enable address and set source address bit */ + (*(__IO uint32_t *)macaddrhr) |= (ETH_MACAHR_SA | ETH_MACAHR_AE); + + return HAL_OK; +} + +/** + * @brief Set the ETH Hash Table Value. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pHashTable: pointer to a table of two 32 bit values, that contains + * the 64 bits of the hash table. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETH_SetHashTable(ETH_HandleTypeDef *heth, uint32_t *pHashTable) +{ + if (pHashTable == NULL) + { + return HAL_ERROR; + } + + heth->Instance->MACHT0R = pHashTable[0]; + heth->Instance->MACHT1R = pHashTable[1]; + + return HAL_OK; +} + +/** + * @brief Set the VLAN Identifier for Rx packets + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param ComparisonBits: 12 or 16 bit comparison mode + must be a value of @ref ETH_VLAN_Tag_Comparison + * @param VLANIdentifier: VLAN Identifier value + * @retval None + */ +void HAL_ETH_SetRxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t ComparisonBits, uint32_t VLANIdentifier) +{ + if (ComparisonBits == ETH_VLANTAGCOMPARISON_16BIT) + { + MODIFY_REG(heth->Instance->MACVTR, ETH_MACVTR_VL, VLANIdentifier); + CLEAR_BIT(heth->Instance->MACVTR, ETH_MACVTR_ETV); + } + else + { + MODIFY_REG(heth->Instance->MACVTR, ETH_MACVTR_VL_VID, VLANIdentifier); + SET_BIT(heth->Instance->MACVTR, ETH_MACVTR_ETV); + } +} + +/** + * @brief Enters the Power down mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pPowerDownConfig: a pointer to ETH_PowerDownConfigTypeDef structure + * that contains the Power Down configuration + * @retval None. + */ +void HAL_ETH_EnterPowerDownMode(ETH_HandleTypeDef *heth, const ETH_PowerDownConfigTypeDef *pPowerDownConfig) +{ + uint32_t powerdownconfig; + + powerdownconfig = (((uint32_t)pPowerDownConfig->MagicPacket << 1) | + ((uint32_t)pPowerDownConfig->WakeUpPacket << 2) | + ((uint32_t)pPowerDownConfig->GlobalUnicast << 9) | + ((uint32_t)pPowerDownConfig->WakeUpForward << 10) | + ETH_MACPCSR_PWRDWN); + + /* Enable PMT interrupt */ + __HAL_ETH_MAC_ENABLE_IT(heth, ETH_MACIER_PMTIE); + + MODIFY_REG(heth->Instance->MACPCSR, ETH_MACPCSR_MASK, powerdownconfig); +} + +/** + * @brief Exits from the Power down mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETH_ExitPowerDownMode(ETH_HandleTypeDef *heth) +{ + /* clear wake up sources */ + CLEAR_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_RWKPKTEN | ETH_MACPCSR_MGKPKTEN | ETH_MACPCSR_GLBLUCAST | + ETH_MACPCSR_RWKPFE); + + if (READ_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_PWRDWN) != (uint32_t)RESET) + { + /* Exit power down mode */ + CLEAR_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_PWRDWN); + } + + /* Disable PMT interrupt */ + __HAL_ETH_MAC_DISABLE_IT(heth, ETH_MACIER_PMTIE); +} + +/** + * @brief Set the WakeUp filter. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pFilter: pointer to filter registers values + * @param Count: number of filter registers, must be from 1 to 8. + * @retval None. + */ +HAL_StatusTypeDef HAL_ETH_SetWakeUpFilter(ETH_HandleTypeDef *heth, uint32_t *pFilter, uint32_t Count) +{ + uint32_t regindex; + + if (pFilter == NULL) + { + return HAL_ERROR; + } + + /* Reset Filter Pointer */ + SET_BIT(heth->Instance->MACPCSR, ETH_MACPCSR_RWKFILTRST); + + /* Wake up packet filter config */ + for (regindex = 0; regindex < Count; regindex++) + { + /* Write filter regs */ + WRITE_REG(heth->Instance->MACRWKPFR, pFilter[regindex]); + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup ETH_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief ETH State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of + ETH communication process, return Peripheral Errors occurred during communication + process + + +@endverbatim + * @{ + */ + +/** + * @brief Returns the ETH state. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL state + */ +HAL_ETH_StateTypeDef HAL_ETH_GetState(const ETH_HandleTypeDef *heth) +{ + return heth->gState; +} + +/** + * @brief Returns the ETH error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH Error Code + */ +uint32_t HAL_ETH_GetError(const ETH_HandleTypeDef *heth) +{ + return heth->ErrorCode; +} + +/** + * @brief Returns the ETH DMA error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH DMA Error Code + */ +uint32_t HAL_ETH_GetDMAError(const ETH_HandleTypeDef *heth) +{ + return heth->DMAErrorCode; +} + +/** + * @brief Returns the ETH MAC error code + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH MAC Error Code + */ +uint32_t HAL_ETH_GetMACError(const ETH_HandleTypeDef *heth) +{ + return heth->MACErrorCode; +} + +/** + * @brief Returns the ETH MAC WakeUp event source + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH MAC WakeUp event source + */ +uint32_t HAL_ETH_GetMACWakeUpSource(const ETH_HandleTypeDef *heth) +{ + return heth->MACWakeUpEvent; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup ETH_Private_Functions ETH Private Functions + * @{ + */ + +static void ETH_SetMACConfig(ETH_HandleTypeDef *heth, const ETH_MACConfigTypeDef *macconf) +{ + uint32_t macregval; + + /*------------------------ MACCR Configuration --------------------*/ + macregval = (macconf->InterPacketGapVal | + macconf->SourceAddrControl | + ((uint32_t)macconf->ChecksumOffload << 27) | + ((uint32_t)macconf->GiantPacketSizeLimitControl << 23) | + ((uint32_t)macconf->Support2KPacket << 22) | + ((uint32_t)macconf->CRCStripTypePacket << 21) | + ((uint32_t)macconf->AutomaticPadCRCStrip << 20) | + ((uint32_t)((macconf->Watchdog == DISABLE) ? 1U : 0U) << 19) | + ((uint32_t)((macconf->Jabber == DISABLE) ? 1U : 0U) << 17) | + ((uint32_t)macconf->JumboPacket << 16) | + macconf->Speed | + macconf->DuplexMode | + ((uint32_t)macconf->LoopbackMode << 12) | + ((uint32_t)macconf->CarrierSenseBeforeTransmit << 11) | + ((uint32_t)((macconf->ReceiveOwn == DISABLE) ? 1U : 0U) << 10) | + ((uint32_t)macconf->CarrierSenseDuringTransmit << 9) | + ((uint32_t)((macconf->RetryTransmission == DISABLE) ? 1U : 0U) << 8) | + macconf->BackOffLimit | + ((uint32_t)macconf->DeferralCheck << 4) | + macconf->PreambleLength); + + /* Write to MACCR */ + MODIFY_REG(heth->Instance->MACCR, ETH_MACCR_MASK, macregval); + + /*------------------------ MACECR Configuration --------------------*/ + macregval = ((macconf->ExtendedInterPacketGapVal << 25) | + ((uint32_t)macconf->ExtendedInterPacketGap << 24) | + ((uint32_t)macconf->UnicastSlowProtocolPacketDetect << 18) | + ((uint32_t)macconf->SlowProtocolDetect << 17) | + ((uint32_t)((macconf->CRCCheckingRxPackets == DISABLE) ? 1U : 0U) << 16) | + macconf->GiantPacketSizeLimit); + + /* Write to MACECR */ + MODIFY_REG(heth->Instance->MACECR, ETH_MACECR_MASK, macregval); + + /*------------------------ MACWTR Configuration --------------------*/ + macregval = (((uint32_t)macconf->ProgrammableWatchdog << 8) | + macconf->WatchdogTimeout); + + /* Write to MACWTR */ + MODIFY_REG(heth->Instance->MACWTR, ETH_MACWTR_MASK, macregval); + + /*------------------------ MACTFCR Configuration --------------------*/ + macregval = (((uint32_t)macconf->TransmitFlowControl << 1) | + macconf->PauseLowThreshold | + ((uint32_t)((macconf->ZeroQuantaPause == DISABLE) ? 1U : 0U) << 7) | + (macconf->PauseTime << 16)); + + /* Write to MACTFCR */ + MODIFY_REG(heth->Instance->MACTFCR, ETH_MACTFCR_MASK, macregval); + + /*------------------------ MACRFCR Configuration --------------------*/ + macregval = ((uint32_t)macconf->ReceiveFlowControl | + ((uint32_t)macconf->UnicastPausePacketDetect << 1)); + + /* Write to MACRFCR */ + MODIFY_REG(heth->Instance->MACRFCR, ETH_MACRFCR_MASK, macregval); + + /*------------------------ MTLTQOMR Configuration --------------------*/ + /* Write to MTLTQOMR */ + MODIFY_REG(heth->Instance->MTLTQOMR, ETH_MTLTQOMR_MASK, macconf->TransmitQueueMode); + + /*------------------------ MTLRQOMR Configuration --------------------*/ + macregval = (macconf->ReceiveQueueMode | + ((uint32_t)((macconf->DropTCPIPChecksumErrorPacket == DISABLE) ? 1U : 0U) << 6) | + ((uint32_t)macconf->ForwardRxErrorPacket << 4) | + ((uint32_t)macconf->ForwardRxUndersizedGoodPacket << 3)); + + /* Write to MTLRQOMR */ + MODIFY_REG(heth->Instance->MTLRQOMR, ETH_MTLRQOMR_MASK, macregval); +} + +static void ETH_SetDMAConfig(ETH_HandleTypeDef *heth, const ETH_DMAConfigTypeDef *dmaconf) +{ + uint32_t dmaregval; + + /*------------------------ DMAMR Configuration --------------------*/ + MODIFY_REG(heth->Instance->DMAMR, ETH_DMAMR_MASK, dmaconf->DMAArbitration); + + /*------------------------ DMASBMR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->AddressAlignedBeats << 12) | + dmaconf->BurstMode | + ((uint32_t)dmaconf->RebuildINCRxBurst << 15)); + + MODIFY_REG(heth->Instance->DMASBMR, ETH_DMASBMR_MASK, dmaregval); + + /*------------------------ DMACCR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->PBLx8Mode << 16) | + dmaconf->MaximumSegmentSize); + MODIFY_REG(heth->Instance->DMACCR, ETH_DMACCR_MASK, dmaregval); + + /*------------------------ DMACTCR Configuration --------------------*/ + dmaregval = (dmaconf->TxDMABurstLength | + ((uint32_t)dmaconf->SecondPacketOperate << 4) | + ((uint32_t)dmaconf->TCPSegmentation << 12)); + + MODIFY_REG(heth->Instance->DMACTCR, ETH_DMACTCR_MASK, dmaregval); + + /*------------------------ DMACRCR Configuration --------------------*/ + dmaregval = (((uint32_t)dmaconf->FlushRxPacket << 31) | + dmaconf->RxDMABurstLength); + + /* Write to DMACRCR */ + MODIFY_REG(heth->Instance->DMACRCR, ETH_DMACRCR_MASK, dmaregval); +} + +/** + * @brief Configures Ethernet MAC and DMA with default parameters. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval HAL status + */ +static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth) +{ + ETH_MACConfigTypeDef macDefaultConf; + ETH_DMAConfigTypeDef dmaDefaultConf; + + /*--------------- ETHERNET MAC registers default Configuration --------------*/ + macDefaultConf.AutomaticPadCRCStrip = ENABLE; + macDefaultConf.BackOffLimit = ETH_BACKOFFLIMIT_10; + macDefaultConf.CarrierSenseBeforeTransmit = DISABLE; + macDefaultConf.CarrierSenseDuringTransmit = DISABLE; + macDefaultConf.ChecksumOffload = ENABLE; + macDefaultConf.CRCCheckingRxPackets = ENABLE; + macDefaultConf.CRCStripTypePacket = ENABLE; + macDefaultConf.DeferralCheck = DISABLE; + macDefaultConf.DropTCPIPChecksumErrorPacket = ENABLE; + macDefaultConf.DuplexMode = ETH_FULLDUPLEX_MODE; + macDefaultConf.ExtendedInterPacketGap = DISABLE; + macDefaultConf.ExtendedInterPacketGapVal = 0x0U; + macDefaultConf.ForwardRxErrorPacket = DISABLE; + macDefaultConf.ForwardRxUndersizedGoodPacket = DISABLE; + macDefaultConf.GiantPacketSizeLimit = 0x618U; + macDefaultConf.GiantPacketSizeLimitControl = DISABLE; + macDefaultConf.InterPacketGapVal = ETH_INTERPACKETGAP_96BIT; + macDefaultConf.Jabber = ENABLE; + macDefaultConf.JumboPacket = DISABLE; + macDefaultConf.LoopbackMode = DISABLE; + macDefaultConf.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS_4; + macDefaultConf.PauseTime = 0x0U; + macDefaultConf.PreambleLength = ETH_PREAMBLELENGTH_7; + macDefaultConf.ProgrammableWatchdog = DISABLE; + macDefaultConf.ReceiveFlowControl = DISABLE; + macDefaultConf.ReceiveOwn = ENABLE; + macDefaultConf.ReceiveQueueMode = ETH_RECEIVESTOREFORWARD; + macDefaultConf.RetryTransmission = ENABLE; + macDefaultConf.SlowProtocolDetect = DISABLE; + macDefaultConf.SourceAddrControl = ETH_SOURCEADDRESS_REPLACE_ADDR0; + macDefaultConf.Speed = ETH_SPEED_100M; + macDefaultConf.Support2KPacket = DISABLE; + macDefaultConf.TransmitQueueMode = ETH_TRANSMITSTOREFORWARD; + macDefaultConf.TransmitFlowControl = DISABLE; + macDefaultConf.UnicastPausePacketDetect = DISABLE; + macDefaultConf.UnicastSlowProtocolPacketDetect = DISABLE; + macDefaultConf.Watchdog = ENABLE; + macDefaultConf.WatchdogTimeout = ETH_MACWTR_WTO_2KB; + macDefaultConf.ZeroQuantaPause = ENABLE; + + /* MAC default configuration */ + ETH_SetMACConfig(heth, &macDefaultConf); + + /*--------------- ETHERNET DMA registers default Configuration --------------*/ + dmaDefaultConf.AddressAlignedBeats = ENABLE; + dmaDefaultConf.BurstMode = ETH_BURSTLENGTH_FIXED; + dmaDefaultConf.DMAArbitration = ETH_DMAARBITRATION_RX1_TX1; + dmaDefaultConf.FlushRxPacket = DISABLE; + dmaDefaultConf.PBLx8Mode = DISABLE; + dmaDefaultConf.RebuildINCRxBurst = DISABLE; + dmaDefaultConf.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT; + dmaDefaultConf.SecondPacketOperate = DISABLE; + dmaDefaultConf.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT; + dmaDefaultConf.TCPSegmentation = DISABLE; + dmaDefaultConf.MaximumSegmentSize = ETH_SEGMENT_SIZE_DEFAULT; + + /* DMA default configuration */ + ETH_SetDMAConfig(heth, &dmaDefaultConf); +} + +/** + * @brief Initializes the DMA Tx descriptors. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMATxDescListInit(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmatxdesc; + uint32_t i; + + /* Fill each DMATxDesc descriptor with the right values */ + for (i = 0; i < (uint32_t)ETH_TX_DESC_CNT; i++) + { + dmatxdesc = heth->Init.TxDesc + i; + + WRITE_REG(dmatxdesc->DESC0, 0x0U); + WRITE_REG(dmatxdesc->DESC1, 0x0U); + WRITE_REG(dmatxdesc->DESC2, 0x0U); + WRITE_REG(dmatxdesc->DESC3, 0x0U); + + WRITE_REG(heth->TxDescList.TxDesc[i], (uint32_t)dmatxdesc); + + } + + heth->TxDescList.CurTxDesc = 0; + + /* Set Transmit Descriptor Ring Length */ + WRITE_REG(heth->Instance->DMACTDRLR, (ETH_TX_DESC_CNT - 1U)); + + /* Set Transmit Descriptor List Address */ + WRITE_REG(heth->Instance->DMACTDLAR, (uint32_t) heth->Init.TxDesc); + + /* Set Transmit Descriptor Tail pointer */ + WRITE_REG(heth->Instance->DMACTDTPR, (uint32_t) heth->Init.TxDesc); +} + +/** + * @brief Initializes the DMA Rx descriptors in chain mode. + * called by HAL_ETH_Init() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +static void ETH_DMARxDescListInit(ETH_HandleTypeDef *heth) +{ + ETH_DMADescTypeDef *dmarxdesc; + uint32_t i; + + for (i = 0; i < (uint32_t)ETH_RX_DESC_CNT; i++) + { + dmarxdesc = heth->Init.RxDesc + i; + + WRITE_REG(dmarxdesc->DESC0, 0x0U); + WRITE_REG(dmarxdesc->DESC1, 0x0U); + WRITE_REG(dmarxdesc->DESC2, 0x0U); + WRITE_REG(dmarxdesc->DESC3, 0x0U); + WRITE_REG(dmarxdesc->BackupAddr0, 0x0U); + WRITE_REG(dmarxdesc->BackupAddr1, 0x0U); + + /* Set Rx descritors addresses */ + WRITE_REG(heth->RxDescList.RxDesc[i], (uint32_t)dmarxdesc); + + } + + WRITE_REG(heth->RxDescList.RxDescIdx, 0U); + WRITE_REG(heth->RxDescList.RxDescCnt, 0U); + WRITE_REG(heth->RxDescList.RxBuildDescIdx, 0U); + WRITE_REG(heth->RxDescList.RxBuildDescCnt, 0U); + WRITE_REG(heth->RxDescList.ItMode, 0U); + + /* Set Receive Descriptor Ring Length */ + WRITE_REG(heth->Instance->DMACRDRLR, ((uint32_t)(ETH_RX_DESC_CNT - 1U))); + + /* Set Receive Descriptor List Address */ + WRITE_REG(heth->Instance->DMACRDLAR, (uint32_t) heth->Init.RxDesc); + + /* Set Receive Descriptor Tail pointer Address */ + WRITE_REG(heth->Instance->DMACRDTPR, ((uint32_t)(heth->Init.RxDesc + (uint32_t)(ETH_RX_DESC_CNT - 1U)))); +} + +/** + * @brief Prepare Tx DMA descriptor before transmission. + * called by HAL_ETH_Transmit_IT and HAL_ETH_Transmit_IT() API. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pTxConfig: Tx packet configuration + * @param ItMode: Enable or disable Tx EOT interrept + * @retval Status + */ +static uint32_t ETH_Prepare_Tx_Descriptors(ETH_HandleTypeDef *heth, const ETH_TxPacketConfigTypeDef *pTxConfig, + uint32_t ItMode) +{ + ETH_TxDescListTypeDef *dmatxdesclist = &heth->TxDescList; + uint32_t descidx = dmatxdesclist->CurTxDesc; + uint32_t firstdescidx = dmatxdesclist->CurTxDesc; + uint32_t idx; + uint32_t descnbr = 0; + ETH_DMADescTypeDef *dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + ETH_BufferTypeDef *txbuffer = pTxConfig->TxBuffer; + uint32_t bd_count = 0; + uint32_t primask_bit; + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if ((READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCWBF_OWN) == ETH_DMATXNDESCWBF_OWN) + || (dmatxdesclist->PacketAddress[descidx] != NULL)) + { + return HAL_ETH_ERROR_BUSY; + } + + /***************************************************************************/ + /***************** Context descriptor configuration (Optional) **********/ + /***************************************************************************/ + /* If VLAN tag is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + { + /* Set vlan tag value */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXCDESC_VT, pTxConfig->VlanTag); + /* Set vlan tag valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_VLTV); + /* Set the descriptor as the vlan input source */ + SET_BIT(heth->Instance->MACVIR, ETH_MACVIR_VLTI); + + /* if inner VLAN is enabled */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_INNERVLANTAG) != (uint32_t)RESET) + { + /* Set inner vlan tag value */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXCDESC_IVT, (pTxConfig->InnerVlanTag << 16)); + /* Set inner vlan tag valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_IVLTV); + + /* Set Vlan Tag control */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXCDESC_IVTIR, pTxConfig->InnerVlanCtrl); + + /* Set the descriptor as the inner vlan input source */ + SET_BIT(heth->Instance->MACIVIR, ETH_MACIVIR_VLTI); + /* Enable double VLAN processing */ + SET_BIT(heth->Instance->MACVTR, ETH_MACVTR_EDVLP); + } + } + + /* if tcp segmentation is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set MSS value */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXCDESC_MSS, pTxConfig->MaxSegmentSize); + /* Set MSS valid bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_TCMSSV); + } + + if ((READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + || (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET)) + { + /* Set as context descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_CTXT); + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Set own bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_OWN); + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + descnbr += 1U; + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if (READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCWBF_OWN) == ETH_DMATXNDESCWBF_OWN) + { + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[firstdescidx]; + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Clear own bit */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXCDESC_OWN); + + return HAL_ETH_ERROR_BUSY; + } + } + + /***************************************************************************/ + /***************** Normal descriptors configuration *****************/ + /***************************************************************************/ + + descnbr += 1U; + + /* Set header or buffer 1 address */ + WRITE_REG(dmatxdesc->DESC0, (uint32_t)txbuffer->buffer); + /* Set header or buffer 1 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B1L, txbuffer->len); + + if (txbuffer->next != NULL) + { + txbuffer = txbuffer->next; + /* Set buffer 2 address */ + WRITE_REG(dmatxdesc->DESC1, (uint32_t)txbuffer->buffer); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, (txbuffer->len << 16)); + } + else + { + WRITE_REG(dmatxdesc->DESC1, 0x0U); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, 0x0U); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set TCP Header length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_THL, (pTxConfig->TCPHeaderLen << 19)); + /* Set TCP payload length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TPL, pTxConfig->PayloadLen); + /* Set TCP Segmentation Enabled bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TSE); + } + else + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FL, pTxConfig->Length); + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CSUM) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CIC, pTxConfig->ChecksumCtrl); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CRCPAD) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CPC, pTxConfig->CRCPadCtrl); + } + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_VLANTAG) != (uint32_t)RESET) + { + /* Set Vlan Tag control */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_VTIR, pTxConfig->VlanCtrl); + } + + /* Mark it as First Descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FD); + /* Mark it as NORMAL descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CTXT); + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* set OWN bit of FIRST descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + + /* If source address insertion/replacement is enabled for this packet */ + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_SAIC) != (uint32_t)RESET) + { + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_SAIC, pTxConfig->SrcAddrCtrl); + } + + /* only if the packet is split into more than one descriptors > 1 */ + while (txbuffer->next != NULL) + { + /* Clear the LD bit of previous descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_LD); + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + /* Clear the FD bit of new Descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FD); + + /* Current Tx Descriptor Owned by DMA: cannot be used by the application */ + if ((READ_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN) == ETH_DMATXNDESCRF_OWN) + || (dmatxdesclist->PacketAddress[descidx] != NULL)) + { + descidx = firstdescidx; + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + + /* clear previous desc own bit */ + for (idx = 0; idx < descnbr; idx ++) + { + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + + /* Increment current tx descriptor index */ + INCR_TX_DESC_INDEX(descidx, 1U); + /* Get current descriptor address */ + dmatxdesc = (ETH_DMADescTypeDef *)dmatxdesclist->TxDesc[descidx]; + } + + return HAL_ETH_ERROR_BUSY; + } + + descnbr += 1U; + + /* Get the next Tx buffer in the list */ + txbuffer = txbuffer->next; + + /* Set header or buffer 1 address */ + WRITE_REG(dmatxdesc->DESC0, (uint32_t)txbuffer->buffer); + /* Set header or buffer 1 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B1L, txbuffer->len); + + if (txbuffer->next != NULL) + { + /* Get the next Tx buffer in the list */ + txbuffer = txbuffer->next; + /* Set buffer 2 address */ + WRITE_REG(dmatxdesc->DESC1, (uint32_t)txbuffer->buffer); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, (txbuffer->len << 16)); + } + else + { + WRITE_REG(dmatxdesc->DESC1, 0x0U); + /* Set buffer 2 Length */ + MODIFY_REG(dmatxdesc->DESC2, ETH_DMATXNDESCRF_B2L, 0x0U); + } + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_TSO) != (uint32_t)RESET) + { + /* Set TCP payload length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TPL, pTxConfig->PayloadLen); + /* Set TCP Segmentation Enabled bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_TSE); + } + else + { + /* Set the packet length */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_FL, pTxConfig->Length); + + if (READ_BIT(pTxConfig->Attributes, ETH_TX_PACKETS_FEATURES_CSUM) != (uint32_t)RESET) + { + /* Checksum Insertion Control */ + MODIFY_REG(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CIC, pTxConfig->ChecksumCtrl); + } + } + + bd_count += 1U; + + /* Ensure rest of descriptor is written to RAM before the OWN bit */ + __DMB(); + /* Set Own bit */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_OWN); + /* Mark it as NORMAL descriptor */ + CLEAR_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_CTXT); + } + + if (ItMode != ((uint32_t)RESET)) + { + /* Set Interrupt on completion bit */ + SET_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_IOC); + } + else + { + /* Clear Interrupt on completion bit */ + CLEAR_BIT(dmatxdesc->DESC2, ETH_DMATXNDESCRF_IOC); + } + + /* Mark it as LAST descriptor */ + SET_BIT(dmatxdesc->DESC3, ETH_DMATXNDESCRF_LD); + /* Save the current packet address to expose it to the application */ + dmatxdesclist->PacketAddress[descidx] = dmatxdesclist->CurrentPacketAddress; + + dmatxdesclist->CurTxDesc = descidx; + + /* Enter critical section */ + primask_bit = __get_PRIMASK(); + __set_PRIMASK(1); + + dmatxdesclist->BuffersInUse += bd_count + 1U; + + /* Exit critical section: restore previous priority mask */ + __set_PRIMASK(primask_bit); + + /* Return function status */ + return HAL_ETH_ERROR_NONE; +} + +#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1) +static void ETH_InitCallbacksToDefault(ETH_HandleTypeDef *heth) +{ + /* Init the ETH Callback settings */ + heth->TxCpltCallback = HAL_ETH_TxCpltCallback; /* Legacy weak TxCpltCallback */ + heth->RxCpltCallback = HAL_ETH_RxCpltCallback; /* Legacy weak RxCpltCallback */ + heth->ErrorCallback = HAL_ETH_ErrorCallback; /* Legacy weak ErrorCallback */ + heth->PMTCallback = HAL_ETH_PMTCallback; /* Legacy weak PMTCallback */ + heth->EEECallback = HAL_ETH_EEECallback; /* Legacy weak EEECallback */ + heth->WakeUpCallback = HAL_ETH_WakeUpCallback; /* Legacy weak WakeUpCallback */ + heth->rxLinkCallback = HAL_ETH_RxLinkCallback; /* Legacy weak RxLinkCallback */ + heth->txFreeCallback = HAL_ETH_TxFreeCallback; /* Legacy weak TxFreeCallback */ +#ifdef HAL_ETH_USE_PTP + heth->txPtpCallback = HAL_ETH_TxPtpCallback; /* Legacy weak TxPtpCallback */ +#endif /* HAL_ETH_USE_PTP */ + heth->rxAllocateCallback = HAL_ETH_RxAllocateCallback; /* Legacy weak RxAllocateCallback */ +} +#endif /* USE_HAL_ETH_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#endif /* HAL_ETH_MODULE_ENABLED */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c new file mode 100644 index 0000000..feb0cfd --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c @@ -0,0 +1,660 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_eth_ex.c + * @author MCD Application Team + * @brief ETH HAL Extended module driver. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +#ifdef HAL_ETH_MODULE_ENABLED + +#if defined(ETH) + +/** @defgroup ETHEx ETHEx + * @brief ETH HAL Extended module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup ETHEx_Private_Constants ETHEx Private Constants + * @{ + */ +#define ETH_MACL4CR_MASK (ETH_MACL3L4CR_L4PEN | ETH_MACL3L4CR_L4SPM | \ + ETH_MACL3L4CR_L4SPIM | ETH_MACL3L4CR_L4DPM | \ + ETH_MACL3L4CR_L4DPIM) + +#define ETH_MACL3CR_MASK (ETH_MACL3L4CR_L3PEN | ETH_MACL3L4CR_L3SAM | \ + ETH_MACL3L4CR_L3SAIM | ETH_MACL3L4CR_L3DAM | \ + ETH_MACL3L4CR_L3DAIM | ETH_MACL3L4CR_L3HSBM | \ + ETH_MACL3L4CR_L3HDBM) + +#define ETH_MACRXVLAN_MASK (ETH_MACVTR_EIVLRXS | ETH_MACVTR_EIVLS | \ + ETH_MACVTR_ERIVLT | ETH_MACVTR_EDVLP | \ + ETH_MACVTR_VTHM | ETH_MACVTR_EVLRXS | \ + ETH_MACVTR_EVLS | ETH_MACVTR_DOVLTC | \ + ETH_MACVTR_ERSVLM | ETH_MACVTR_ESVL | \ + ETH_MACVTR_VTIM | ETH_MACVTR_ETV) + +#define ETH_MACTXVLAN_MASK (ETH_MACVIR_VLTI | ETH_MACVIR_CSVL | \ + ETH_MACVIR_VLP | ETH_MACVIR_VLC) + +#define ETH_MAC_L4_SRSP_MASK 0x0000FFFFU +#define ETH_MAC_L4_DSTP_MASK 0xFFFF0000U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup ETHEx_Exported_Functions ETH Extended Exported Functions + * @{ + */ + +/** @defgroup ETHEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure ARP offload module + (+) Configure L3 and L4 filters + (+) Configure Extended VLAN features + (+) Configure Energy Efficient Ethernet module + +@endverbatim + * @{ + */ + +/** + * @brief Enables ARP Offload. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ + +void HAL_ETHEx_EnableARPOffload(ETH_HandleTypeDef *heth) +{ + SET_BIT(heth->Instance->MACCR, ETH_MACCR_ARP); +} + +/** + * @brief Disables ARP Offload. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +void HAL_ETHEx_DisableARPOffload(ETH_HandleTypeDef *heth) +{ + CLEAR_BIT(heth->Instance->MACCR, ETH_MACCR_ARP); +} + +/** + * @brief Set the ARP Match IP address + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param IpAddress: IP Address to be matched for incoming ARP requests + * @retval None + */ +void HAL_ETHEx_SetARPAddressMatch(ETH_HandleTypeDef *heth, uint32_t IpAddress) +{ + WRITE_REG(heth->Instance->MACARPAR, IpAddress); +} + +/** + * @brief Configures the L4 Filter, this function allow to: + * set the layer 4 protocol to be matched (TCP or UDP) + * enable/disable L4 source/destination port perfect/inverse match. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param Filter: L4 filter to configured, this parameter must be one of the following + * ETH_L4_FILTER_0 + * ETH_L4_FILTER_1 + * @param pL4FilterConfig: pointer to a ETH_L4FilterConfigTypeDef structure + * that contains L4 filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_SetL4FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, + const ETH_L4FilterConfigTypeDef *pL4FilterConfig) +{ + if (pL4FilterConfig == NULL) + { + return HAL_ERROR; + } + + if (Filter == ETH_L4_FILTER_0) + { + /* Write configuration to MACL3L4C0R register */ + MODIFY_REG(heth->Instance->MACL3L4C0R, ETH_MACL4CR_MASK, (pL4FilterConfig->Protocol | + pL4FilterConfig->SrcPortFilterMatch | + pL4FilterConfig->DestPortFilterMatch)); + + /* Write configuration to MACL4A0R register */ + WRITE_REG(heth->Instance->MACL4A0R, (pL4FilterConfig->SourcePort | (pL4FilterConfig->DestinationPort << 16))); + + } + else /* Filter == ETH_L4_FILTER_1 */ + { + /* Write configuration to MACL3L4C1R register */ + MODIFY_REG(heth->Instance->MACL3L4C1R, ETH_MACL4CR_MASK, (pL4FilterConfig->Protocol | + pL4FilterConfig->SrcPortFilterMatch | + pL4FilterConfig->DestPortFilterMatch)); + + /* Write configuration to MACL4A1R register */ + WRITE_REG(heth->Instance->MACL4A1R, (pL4FilterConfig->SourcePort | (pL4FilterConfig->DestinationPort << 16))); + } + + /* Enable L4 filter */ + SET_BIT(heth->Instance->MACPFR, ETH_MACPFR_IPFE); + + return HAL_OK; +} + +/** + * @brief Configures the L4 Filter, this function allow to: + * set the layer 4 protocol to be matched (TCP or UDP) + * enable/disable L4 source/destination port perfect/inverse match. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param Filter: L4 filter to configured, this parameter must be one of the following + * ETH_L4_FILTER_0 + * ETH_L4_FILTER_1 + * @param pL4FilterConfig: pointer to a ETH_L4FilterConfigTypeDef structure + * that contains L4 filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_GetL4FilterConfig(const ETH_HandleTypeDef *heth, uint32_t Filter, + ETH_L4FilterConfigTypeDef *pL4FilterConfig) +{ + if (pL4FilterConfig == NULL) + { + return HAL_ERROR; + } + + if (Filter == ETH_L4_FILTER_0) + { + /* Get configuration from MACL3L4C0R register */ + pL4FilterConfig->Protocol = READ_BIT(heth->Instance->MACL3L4C0R, ETH_MACL3L4CR_L4PEN); + pL4FilterConfig->DestPortFilterMatch = READ_BIT(heth->Instance->MACL3L4C0R, + (ETH_MACL3L4CR_L4DPM | ETH_MACL3L4CR_L4DPIM)); + pL4FilterConfig->SrcPortFilterMatch = READ_BIT(heth->Instance->MACL3L4C0R, + (ETH_MACL3L4CR_L4SPM | ETH_MACL3L4CR_L4SPIM)); + + /* Get configuration from MACL4A0R register */ + pL4FilterConfig->DestinationPort = (READ_BIT(heth->Instance->MACL4A0R, ETH_MAC_L4_DSTP_MASK) >> 16); + pL4FilterConfig->SourcePort = READ_BIT(heth->Instance->MACL4A0R, ETH_MAC_L4_SRSP_MASK); + } + else /* Filter == ETH_L4_FILTER_1 */ + { + /* Get configuration from MACL3L4C1R register */ + pL4FilterConfig->Protocol = READ_BIT(heth->Instance->MACL3L4C1R, ETH_MACL3L4CR_L4PEN); + pL4FilterConfig->DestPortFilterMatch = READ_BIT(heth->Instance->MACL3L4C1R, + (ETH_MACL3L4CR_L4DPM | ETH_MACL3L4CR_L4DPIM)); + pL4FilterConfig->SrcPortFilterMatch = READ_BIT(heth->Instance->MACL3L4C1R, + (ETH_MACL3L4CR_L4SPM | ETH_MACL3L4CR_L4SPIM)); + + /* Get configuration from MACL4A1R register */ + pL4FilterConfig->DestinationPort = (READ_BIT(heth->Instance->MACL4A1R, ETH_MAC_L4_DSTP_MASK) >> 16); + pL4FilterConfig->SourcePort = READ_BIT(heth->Instance->MACL4A1R, ETH_MAC_L4_SRSP_MASK); + } + + return HAL_OK; +} + +/** + * @brief Configures the L3 Filter, this function allow to: + * set the layer 3 protocol to be matched (IPv4 or IPv6) + * enable/disable L3 source/destination port perfect/inverse match. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param Filter: L3 filter to configured, this parameter must be one of the following + * ETH_L3_FILTER_0 + * ETH_L3_FILTER_1 + * @param pL3FilterConfig: pointer to a ETH_L3FilterConfigTypeDef structure + * that contains L3 filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_SetL3FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, + const ETH_L3FilterConfigTypeDef *pL3FilterConfig) +{ + if (pL3FilterConfig == NULL) + { + return HAL_ERROR; + } + + if (Filter == ETH_L3_FILTER_0) + { + /* Write configuration to MACL3L4C0R register */ + MODIFY_REG(heth->Instance->MACL3L4C0R, ETH_MACL3CR_MASK, (pL3FilterConfig->Protocol | + pL3FilterConfig->SrcAddrFilterMatch | + pL3FilterConfig->DestAddrFilterMatch | + (pL3FilterConfig->SrcAddrHigherBitsMatch << 6) | + (pL3FilterConfig->DestAddrHigherBitsMatch << 11))); + } + else /* Filter == ETH_L3_FILTER_1 */ + { + /* Write configuration to MACL3L4C1R register */ + MODIFY_REG(heth->Instance->MACL3L4C1R, ETH_MACL3CR_MASK, (pL3FilterConfig->Protocol | + pL3FilterConfig->SrcAddrFilterMatch | + pL3FilterConfig->DestAddrFilterMatch | + (pL3FilterConfig->SrcAddrHigherBitsMatch << 6) | + (pL3FilterConfig->DestAddrHigherBitsMatch << 11))); + } + + if (Filter == ETH_L3_FILTER_0) + { + /* Check if IPv6 protocol is selected */ + if (pL3FilterConfig->Protocol != ETH_L3_IPV4_MATCH) + { + /* Set the IPv6 address match */ + /* Set Bits[31:0] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A0R0R, pL3FilterConfig->Ip6Addr[0]); + /* Set Bits[63:32] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A1R0R, pL3FilterConfig->Ip6Addr[1]); + /* update Bits[95:64] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A2R0R, pL3FilterConfig->Ip6Addr[2]); + /* update Bits[127:96] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A3R0R, pL3FilterConfig->Ip6Addr[3]); + } + else /* IPv4 protocol is selected */ + { + /* Set the IPv4 source address match */ + WRITE_REG(heth->Instance->MACL3A0R0R, pL3FilterConfig->Ip4SrcAddr); + /* Set the IPv4 destination address match */ + WRITE_REG(heth->Instance->MACL3A1R0R, pL3FilterConfig->Ip4DestAddr); + } + } + else /* Filter == ETH_L3_FILTER_1 */ + { + /* Check if IPv6 protocol is selected */ + if (pL3FilterConfig->Protocol != ETH_L3_IPV4_MATCH) + { + /* Set the IPv6 address match */ + /* Set Bits[31:0] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A0R1R, pL3FilterConfig->Ip6Addr[0]); + /* Set Bits[63:32] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A1R1R, pL3FilterConfig->Ip6Addr[1]); + /* update Bits[95:64] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A1R1R, pL3FilterConfig->Ip6Addr[2]); + /* update Bits[127:96] of 128-bit IP addr */ + WRITE_REG(heth->Instance->MACL3A1R1R, pL3FilterConfig->Ip6Addr[3]); + } + else /* IPv4 protocol is selected */ + { + /* Set the IPv4 source address match */ + WRITE_REG(heth->Instance->MACL3A0R1R, pL3FilterConfig->Ip4SrcAddr); + /* Set the IPv4 destination address match */ + WRITE_REG(heth->Instance->MACL3A0R1R, pL3FilterConfig->Ip4DestAddr); + + } + } + + /* Enable L3 filter */ + SET_BIT(heth->Instance->MACPFR, ETH_MACPFR_IPFE); + + return HAL_OK; +} + +/** + * @brief Configures the L3 Filter, this function allow to: + * set the layer 3 protocol to be matched (IPv4 or IPv6) + * enable/disable L3 source/destination port perfect/inverse match. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param Filter: L3 filter to configured, this parameter must be one of the following + * ETH_L3_FILTER_0 + * ETH_L3_FILTER_1 + * @param pL3FilterConfig: pointer to a ETH_L3FilterConfigTypeDef structure + * that will contain the L3 filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_GetL3FilterConfig(const ETH_HandleTypeDef *heth, uint32_t Filter, + ETH_L3FilterConfigTypeDef *pL3FilterConfig) +{ + if (pL3FilterConfig == NULL) + { + return HAL_ERROR; + } + pL3FilterConfig->Protocol = READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + ETH_MACL3L4CR_L3PEN); + pL3FilterConfig->SrcAddrFilterMatch = READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + (ETH_MACL3L4CR_L3SAM | ETH_MACL3L4CR_L3SAIM)); + pL3FilterConfig->DestAddrFilterMatch = READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + (ETH_MACL3L4CR_L3DAM | ETH_MACL3L4CR_L3DAIM)); + pL3FilterConfig->SrcAddrHigherBitsMatch = (READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + ETH_MACL3L4CR_L3HSBM) >> 6); + pL3FilterConfig->DestAddrHigherBitsMatch = (READ_BIT(*((__IO uint32_t *)(&(heth->Instance->MACL3L4C0R) + Filter)), + ETH_MACL3L4CR_L3HDBM) >> 11); + + if (Filter == ETH_L3_FILTER_0) + { + if (pL3FilterConfig->Protocol != ETH_L3_IPV4_MATCH) + { + WRITE_REG(pL3FilterConfig->Ip6Addr[0], heth->Instance->MACL3A0R0R); + WRITE_REG(pL3FilterConfig->Ip6Addr[1], heth->Instance->MACL3A1R0R); + WRITE_REG(pL3FilterConfig->Ip6Addr[2], heth->Instance->MACL3A2R0R); + WRITE_REG(pL3FilterConfig->Ip6Addr[3], heth->Instance->MACL3A3R0R); + } + else + { + WRITE_REG(pL3FilterConfig->Ip4SrcAddr, heth->Instance->MACL3A0R0R); + WRITE_REG(pL3FilterConfig->Ip4DestAddr, heth->Instance->MACL3A1R0R); + } + } + else /* ETH_L3_FILTER_1 */ + { + if (pL3FilterConfig->Protocol != ETH_L3_IPV4_MATCH) + { + WRITE_REG(pL3FilterConfig->Ip6Addr[0], heth->Instance->MACL3A0R1R); + WRITE_REG(pL3FilterConfig->Ip6Addr[1], heth->Instance->MACL3A1R1R); + WRITE_REG(pL3FilterConfig->Ip6Addr[2], heth->Instance->MACL3A2R1R); + WRITE_REG(pL3FilterConfig->Ip6Addr[3], heth->Instance->MACL3A3R1R); + } + else + { + WRITE_REG(pL3FilterConfig->Ip4SrcAddr, heth->Instance->MACL3A0R1R); + WRITE_REG(pL3FilterConfig->Ip4DestAddr, heth->Instance->MACL3A1R1R); + } + } + + return HAL_OK; +} + +/** + * @brief Enables L3 and L4 filtering process. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETHEx_EnableL3L4Filtering(ETH_HandleTypeDef *heth) +{ + /* Enable L3/L4 filter */ + SET_BIT(heth->Instance->MACPFR, ETH_MACPFR_IPFE); +} + +/** + * @brief Disables L3 and L4 filtering process. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETHEx_DisableL3L4Filtering(ETH_HandleTypeDef *heth) +{ + /* Disable L3/L4 filter */ + CLEAR_BIT(heth->Instance->MACPFR, ETH_MACPFR_IPFE); +} + +/** + * @brief Get the VLAN Configuration for Receive Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pVlanConfig: pointer to a ETH_RxVLANConfigTypeDef structure + * that will contain the VLAN filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_GetRxVLANConfig(const ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig) +{ + if (pVlanConfig == NULL) + { + return HAL_ERROR; + } + + pVlanConfig->InnerVLANTagInStatus = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_EIVLRXS) >> 31) == 0U) ? DISABLE : ENABLE; + pVlanConfig->StripInnerVLANTag = READ_BIT(heth->Instance->MACVTR, ETH_MACVTR_EIVLS); + pVlanConfig->InnerVLANTag = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_ERIVLT) >> 27) == 0U) ? DISABLE : ENABLE; + pVlanConfig->DoubleVLANProcessing = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_EDVLP) >> 26) == 0U) ? DISABLE : ENABLE; + pVlanConfig->VLANTagHashTableMatch = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_VTHM) >> 25) == 0U) ? DISABLE : ENABLE; + pVlanConfig->VLANTagInStatus = ((READ_BIT(heth->Instance->MACVTR, + ETH_MACVTR_EVLRXS) >> 24) == 0U) ? DISABLE : ENABLE; + pVlanConfig->StripVLANTag = READ_BIT(heth->Instance->MACVTR, ETH_MACVTR_EVLS); + pVlanConfig->VLANTypeCheck = READ_BIT(heth->Instance->MACVTR, + (ETH_MACVTR_DOVLTC | ETH_MACVTR_ERSVLM | ETH_MACVTR_ESVL)); + pVlanConfig->VLANTagInverceMatch = ((READ_BIT(heth->Instance->MACVTR, ETH_MACVTR_VTIM) >> 17) == 0U) + ? DISABLE : ENABLE; + + return HAL_OK; +} + +/** + * @brief Set the VLAN Configuration for Receive Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param pVlanConfig: pointer to a ETH_RxVLANConfigTypeDef structure + * that contains VLAN filter configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ETHEx_SetRxVLANConfig(ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig) +{ + if (pVlanConfig == NULL) + { + return HAL_ERROR; + } + + /* Write config to MACVTR */ + MODIFY_REG(heth->Instance->MACVTR, ETH_MACRXVLAN_MASK, (((uint32_t)pVlanConfig->InnerVLANTagInStatus << 31) | + pVlanConfig->StripInnerVLANTag | + ((uint32_t)pVlanConfig->InnerVLANTag << 27) | + ((uint32_t)pVlanConfig->DoubleVLANProcessing << 26) | + ((uint32_t)pVlanConfig->VLANTagHashTableMatch << 25) | + ((uint32_t)pVlanConfig->VLANTagInStatus << 24) | + pVlanConfig->StripVLANTag | + pVlanConfig->VLANTypeCheck | + ((uint32_t)pVlanConfig->VLANTagInverceMatch << 17))); + + return HAL_OK; +} + +/** + * @brief Set the VLAN Hash Table + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param VLANHashTable: VLAN hash table 16 bit value + * @retval None + */ +void HAL_ETHEx_SetVLANHashTable(ETH_HandleTypeDef *heth, uint32_t VLANHashTable) +{ + MODIFY_REG(heth->Instance->MACVHTR, ETH_MACVHTR_VLHT, VLANHashTable); +} + +/** + * @brief Get the VLAN Configuration for Transmit Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param VLANTag: Selects the vlan tag, this parameter must be one of the following + * ETH_OUTER_TX_VLANTAG + * ETH_INNER_TX_VLANTAG + * @param pVlanConfig: pointer to a ETH_TxVLANConfigTypeDef structure + * that will contain the Tx VLAN filter configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_ETHEx_GetTxVLANConfig(const ETH_HandleTypeDef *heth, uint32_t VLANTag, + ETH_TxVLANConfigTypeDef *pVlanConfig) +{ + if (pVlanConfig == NULL) + { + return HAL_ERROR; + } + + if (VLANTag == ETH_INNER_TX_VLANTAG) + { + pVlanConfig->SourceTxDesc = ((READ_BIT(heth->Instance->MACIVIR, ETH_MACVIR_VLTI) >> 20) == 0U) ? DISABLE : ENABLE; + pVlanConfig->SVLANType = ((READ_BIT(heth->Instance->MACIVIR, ETH_MACVIR_CSVL) >> 19) == 0U) ? DISABLE : ENABLE; + pVlanConfig->VLANTagControl = READ_BIT(heth->Instance->MACIVIR, (ETH_MACVIR_VLP | ETH_MACVIR_VLC)); + } + else + { + pVlanConfig->SourceTxDesc = ((READ_BIT(heth->Instance->MACVIR, ETH_MACVIR_VLTI) >> 20) == 0U) ? DISABLE : ENABLE; + pVlanConfig->SVLANType = ((READ_BIT(heth->Instance->MACVIR, ETH_MACVIR_CSVL) >> 19) == 0U) ? DISABLE : ENABLE; + pVlanConfig->VLANTagControl = READ_BIT(heth->Instance->MACVIR, (ETH_MACVIR_VLP | ETH_MACVIR_VLC)); + } + + return HAL_OK;; +} + +/** + * @brief Set the VLAN Configuration for Transmit Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param VLANTag: Selects the vlan tag, this parameter must be one of the following + * ETH_OUTER_TX_VLANTAG + * ETH_INNER_TX_VLANTAG + * @param pVlanConfig: pointer to a ETH_TxVLANConfigTypeDef structure + * that contains Tx VLAN filter configuration. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_ETHEx_SetTxVLANConfig(ETH_HandleTypeDef *heth, uint32_t VLANTag, + const ETH_TxVLANConfigTypeDef *pVlanConfig) +{ + if (VLANTag == ETH_INNER_TX_VLANTAG) + { + MODIFY_REG(heth->Instance->MACIVIR, ETH_MACTXVLAN_MASK, (((uint32_t)pVlanConfig->SourceTxDesc << 20) | + ((uint32_t)pVlanConfig->SVLANType << 19) | + pVlanConfig->VLANTagControl)); + /* Enable Double VLAN processing */ + SET_BIT(heth->Instance->MACVTR, ETH_MACVTR_EDVLP); + } + else + { + MODIFY_REG(heth->Instance->MACVIR, ETH_MACTXVLAN_MASK, (((uint32_t)pVlanConfig->SourceTxDesc << 20) | + ((uint32_t)pVlanConfig->SVLANType << 19) | + pVlanConfig->VLANTagControl)); + } + + return HAL_OK; +} + +/** + * @brief Set the VLAN Tag Identifier for Transmit Packets. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param VLANTag: Selects the vlan tag, this parameter must be one of the following + * ETH_OUTER_TX_VLANTAG + * ETH_INNER_TX_VLANTAG + * @param VLANIdentifier: VLAN Identifier 16 bit value + * @retval None + */ +void HAL_ETHEx_SetTxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t VLANTag, uint32_t VLANIdentifier) +{ + if (VLANTag == ETH_INNER_TX_VLANTAG) + { + MODIFY_REG(heth->Instance->MACIVIR, ETH_MACVIR_VLT, VLANIdentifier); + } + else + { + MODIFY_REG(heth->Instance->MACVIR, ETH_MACVIR_VLT, VLANIdentifier); + } +} + +/** + * @brief Enables the VLAN Tag Filtering process. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETHEx_EnableVLANProcessing(ETH_HandleTypeDef *heth) +{ + /* Enable VLAN processing */ + SET_BIT(heth->Instance->MACPFR, ETH_MACPFR_VTFE); +} + +/** + * @brief Disables the VLAN Tag Filtering process. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None. + */ +void HAL_ETHEx_DisableVLANProcessing(ETH_HandleTypeDef *heth) +{ + /* Disable VLAN processing */ + CLEAR_BIT(heth->Instance->MACPFR, ETH_MACPFR_VTFE); +} + +/** + * @brief Enters the Low Power Idle (LPI) mode + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @param TxAutomate: Enable/Disable automate enter/exit LPI mode. + * @param TxClockStop: Enable/Disable Tx clock stop in LPI mode. + * @retval None + */ +void HAL_ETHEx_EnterLPIMode(ETH_HandleTypeDef *heth, FunctionalState TxAutomate, FunctionalState TxClockStop) +{ + /* Enable LPI Interrupts */ + __HAL_ETH_MAC_ENABLE_IT(heth, ETH_MACIER_LPIIE); + + /* Write to LPI Control register: Enter low power mode */ + MODIFY_REG(heth->Instance->MACLCSR, (ETH_MACLCSR_LPIEN | ETH_MACLCSR_LPITXA | ETH_MACLCSR_LPITCSE), + (((uint32_t)TxAutomate << 19) | + ((uint32_t)TxClockStop << 21) | + ETH_MACLCSR_LPIEN)); +} + +/** + * @brief Exits the Low Power Idle (LPI) mode. + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval None + */ +void HAL_ETHEx_ExitLPIMode(ETH_HandleTypeDef *heth) +{ + /* Clear the LPI Config and exit low power mode */ + CLEAR_BIT(heth->Instance->MACLCSR, (ETH_MACLCSR_LPIEN | ETH_MACLCSR_LPITXA | ETH_MACLCSR_LPITCSE)); + + /* Enable LPI Interrupts */ + __HAL_ETH_MAC_DISABLE_IT(heth, ETH_MACIER_LPIIE); +} + +/** + * @brief Returns the ETH MAC LPI event + * @param heth: pointer to a ETH_HandleTypeDef structure that contains + * the configuration information for ETHERNET module + * @retval ETH MAC WakeUp event + */ +uint32_t HAL_ETHEx_GetMACLPIEvent(const ETH_HandleTypeDef *heth) +{ + return heth->MACLPIEvent; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ETH */ + +#endif /* HAL_ETH_MODULE_ENABLED */ +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c new file mode 100644 index 0000000..fe54a03 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c @@ -0,0 +1,865 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt (CORE1 or CORE2 in case of dual core line ) + (++) Event (CORE1 or CORE2 in case of dual core line ) + (++) a combination of the previous + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two diffenrents + interrupt pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + (+) PendClearSource used to set the D3 Smart Run Domain autoamtic pend clear source. + It is applicable for line with wkaeup target is Any (CPU1 , CPU2 and D3 smart run domain). + Value can be one of the following: + (++) EXTI_D3_PENDCLR_SRC_NONE : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 0 + (+++) On a configurable Line : the D3 domain wakeup signal is + automatically cleared after after the Delay + Rising Edge detect + (+++) On a direct Line : the D3 domain wakeup signal is + cleared after the direct event input signal is cleared + + (++) EXTI_D3_PENDCLR_SRC_DMACH6 : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 1 + and corresponding bits(2) of D3PCRxL/H is set to b00 : + DMA ch6 event selected as D3 domain pendclear source + + (++) EXTI_D3_PENDCLR_SRC_DMACH7 : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 1 + and corresponding bits(2) of D3PCRxL/H is set to b01 : + DMA ch7 event selected as D3 domain pendclear source + + (++) EXTI_D3_PENDCLR_SRC_LPTIM4 : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 1 + and corresponding bits(2) of D3PCRxL/H is set to b10 : + LPTIM4 out selected as D3 domain pendclear source + + (++) EXTI_D3_PENDCLR_SRC_LPTIM5 : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 1 + and corresponding bits(2) of D3PCRxL/H is set to b11 : + LPTIM5 out selected as D3 domain pendclear source + + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + (++) For Exti lines with wkaeup target is Any (CPU1 , CPU2 and D3 smart run domain), + choose gpio D3 PendClearSource using PendClearSource + member from EXTI_PendClear_Source structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_ClearConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_ClearPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x04U /* 0x10: offset between CPU IMR/EMR registers */ +#define EXTI_CONFIG_OFFSET 0x08U /* 0x20: offset between CPU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + uint32_t pcrlinepos; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00U) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03U))); + regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03U))); + SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* The event mode cannot be configured if the line does not support it */ + assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT)); + + /* Configure event mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + +#if defined (DUAL_CORE) + /* Configure interrupt mode for Core2 : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_CORE2_INTERRUPT) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* The event mode cannot be configured if the line does not support it */ + assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_CORE2_EVENT) != EXTI_MODE_CORE2_EVENT)); + + /* Configure event mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_CORE2_EVENT) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; +#endif /* DUAL_CORE */ + + /* Configure the D3 PendClear source in case of Wakeup target is Any */ + if ((pExtiConfig->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL) + { + assert_param(IS_EXTI_D3_PENDCLR_SRC(pExtiConfig->PendClearSource)); + + /*Calc the PMR register address for the given line */ + regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + if(pExtiConfig->PendClearSource == EXTI_D3_PENDCLR_SRC_NONE) + { + /* Clear D3PMRx register for the given line */ + regval &= ~maskline; + /* Store D3PMRx register value */ + *regaddr = regval; + } + else + { + /* Set D3PMRx register to 1 for the given line */ + regval |= maskline; + /* Store D3PMRx register value */ + *regaddr = regval; + + if(linepos < 16UL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << linepos; + } + else + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << (linepos - 16UL); + } + + regval = (*regaddr & (~(pcrlinepos * pcrlinepos * 3UL))) | (pcrlinepos * pcrlinepos * (pExtiConfig->PendClearSource - 1UL)); + *regaddr = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + uint32_t pcrlinepos; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + pExtiConfig->Mode = EXTI_MODE_NONE; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + + /* Get event mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } +#if defined (DUAL_CORE) + regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Mode = EXTI_MODE_CORE2_INTERRUPT; + } + + /* Get event mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Mode |= EXTI_MODE_CORE2_EVENT; + } +#endif /*DUAL_CORE*/ + + /* Get default Trigger and GPIOSel configuration */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00U; + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00U) + { + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + + /* Get falling configuration */ + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL]; + pExtiConfig->GPIOSel = (regval >> (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))) & SYSCFG_EXTICR1_EXTI0; + } + } + + /* Get default Pend Clear Source */ + pExtiConfig->PendClearSource = EXTI_D3_PENDCLR_SRC_NONE; + + /* 3] Get D3 Pend Clear source */ + if ((pExtiConfig->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset)); + if(((*regaddr) & linepos) != 0UL) + { + /* if wakeup target is any and PMR set, the read pend clear source from D3PCRxL/H */ + if(linepos < 16UL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << linepos; + } + else + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << (linepos - 16UL); + } + + pExtiConfig->PendClearSource = 1UL + ((*regaddr & (pcrlinepos * pcrlinepos * 3UL)) / (pcrlinepos * pcrlinepos)); + } + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + uint32_t pcrlinepos; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + +#if defined (DUAL_CORE) + /* 1] Clear CM4 interrupt mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear CM4 event mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; +#endif /* DUAL_CORE */ + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00U) + { + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03UL))); + SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL] = regval; + } + } + + /* 4] Clear D3 Config lines */ + if ((hexti->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = (*regaddr & ~maskline); + + if(linepos < 16UL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << linepos; + } + else + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << (linepos - 16UL); + } + + /*Clear D3 PendClear source */ + *regaddr &= (~(pcrlinepos * pcrlinepos * 3UL)); + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + +#if defined(DUAL_CORE) + if (HAL_GetCurrentCPUID() == CM7_CPUID) + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + } + else /* Cortex-M4*/ + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset)); + } +#else + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); +#endif /* DUAL_CORE */ + + /* Get pending bit */ + regval = (*regaddr & maskline); + + if (regval != 0x00U) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Edge); + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + +#if defined(DUAL_CORE) + if (HAL_GetCurrentCPUID() == CM7_CPUID) + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + } + else /* Cortex-M4 */ + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset)); + } +#else + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); +#endif /* DUAL_CORE */ + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Edge); + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + +#if defined(DUAL_CORE) + if (HAL_GetCurrentCPUID() == CM7_CPUID) + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + } + else /* Cortex-M4 */ + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset)); + } +#else + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); +#endif /* DUAL_CORE */ + + /* Clear Pending bit */ + *regaddr = maskline; +} + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (__IO uint32_t *)(&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c new file mode 100644 index 0000000..3706941 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c @@ -0,0 +1,1270 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AXI I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) Error code correction (ECC) : Data in flash are 266-bits word + (10 bits added per flash word) + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32H7xx devices. + + (#) FLASH Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: 256-bit word only + (++) There Two modes of programming : + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions : + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_FLASH_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_OB_Launch() function. + In this case, a reset is generated + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the FLASH interrupts + (+) Monitor the FLASH flags status + [..] + (@) For any Flash memory program operation (erase or program), the CPU clock frequency + (HCLK) must be at least 1MHz. + (@) The contents of the Flash memory are not guaranteed if a device reset occurs during + a Flash memory operation. + (@) The application can simultaneously request a read and a write operation through each AXI + interface. + As the Flash memory is divided into two independent banks, the embedded Flash + memory interface can drive different operations at the same time on each bank. For + example a read, write or erase operation can be executed on bank 1 while another read, + write or erase operation is executed on bank 2. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +FLASH_ProcessTypeDef pFlash; +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup FLASH_Exported_Functions FLASH Exported functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program a flash word at a specified address + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param FlashAddress specifies the address to be programmed. + * This parameter shall be aligned to the Flash word: + * - 256 bits for STM32H74x/5X devices (8x 32bits words) + * - 128 bits for STM32H7Ax/BX devices (4x 32bits words) + * - 256 bits for STM32H72x/3X devices (8x 32bits words) + * @param DataAddress specifies the address of data to be programmed. + * This parameter shall be 32-bit aligned + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress) +{ + HAL_StatusTypeDef status; + __IO uint32_t *dest_addr = (__IO uint32_t *)FlashAddress; + __IO uint32_t *src_addr = (__IO uint32_t*)DataAddress; + uint32_t bank; + uint8_t row_index = FLASH_NB_32BITWORD_IN_FLASHWORD; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(FlashAddress)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + +#if defined (FLASH_OPTCR_PG_OTP) + if((IS_FLASH_PROGRAM_ADDRESS_BANK1(FlashAddress)) || (IS_FLASH_PROGRAM_ADDRESS_OTP(FlashAddress))) +#else + if(IS_FLASH_PROGRAM_ADDRESS_BANK1(FlashAddress)) +#endif /* FLASH_OPTCR_PG_OTP */ + { + bank = FLASH_BANK_1; + /* Prevent unused argument(s) compilation warning */ + UNUSED(TypeProgram); + } +#if defined (DUAL_BANK) + else if(IS_FLASH_PROGRAM_ADDRESS_BANK2(FlashAddress)) + { + bank = FLASH_BANK_2; + } +#endif /* DUAL_BANK */ + else + { + return HAL_ERROR; + } + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, bank); + + if(status == HAL_OK) + { +#if defined (DUAL_BANK) + if(bank == FLASH_BANK_1) + { +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Set OTP_PG bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Set PG bit */ + SET_BIT(FLASH->CR1, FLASH_CR_PG); + } + } + else + { + /* Set PG bit */ + SET_BIT(FLASH->CR2, FLASH_CR_PG); + } +#else /* Single Bank */ +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Set OTP_PG bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Set PG bit */ + SET_BIT(FLASH->CR1, FLASH_CR_PG); + } +#endif /* DUAL_BANK */ + + __ISB(); + __DSB(); + +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Program an OTP word (16 bits) */ + *(__IO uint16_t *)FlashAddress = *(__IO uint16_t*)DataAddress; + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Program the flash word */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + row_index--; + } while (row_index != 0U); + } + + __ISB(); + __DSB(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, bank); + +#if defined (DUAL_BANK) +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* If the program operation is completed, disable the OTP_PG */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + if(bank == FLASH_BANK_1) + { + /* If the program operation is completed, disable the PG */ + CLEAR_BIT(FLASH->CR1, FLASH_CR_PG); + } + else + { + /* If the program operation is completed, disable the PG */ + CLEAR_BIT(FLASH->CR2, FLASH_CR_PG); + } + } +#else /* Single Bank */ +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* If the program operation is completed, disable the OTP_PG */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* If the program operation is completed, disable the PG */ + CLEAR_BIT(FLASH->CR1, FLASH_CR_PG); + } +#endif /* DUAL_BANK */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program a flash word at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param FlashAddress specifies the address to be programmed. + * This parameter shall be aligned to the Flash word: + * - 256 bits for STM32H74x/5X devices (8x 32bits words) + * - 128 bits for STM32H7Ax/BX devices (4x 32bits words) + * - 256 bits for STM32H72x/3X devices (8x 32bits words) + * @param DataAddress specifies the address of data to be programmed. + * This parameter shall be 32-bit aligned + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress) +{ + HAL_StatusTypeDef status; + __IO uint32_t *dest_addr = (__IO uint32_t*)FlashAddress; + __IO uint32_t *src_addr = (__IO uint32_t*)DataAddress; + uint32_t bank; + uint8_t row_index = FLASH_NB_32BITWORD_IN_FLASHWORD; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(FlashAddress)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + +#if defined (FLASH_OPTCR_PG_OTP) + if((IS_FLASH_PROGRAM_ADDRESS_BANK1(FlashAddress)) || (IS_FLASH_PROGRAM_ADDRESS_OTP(FlashAddress))) +#else + if(IS_FLASH_PROGRAM_ADDRESS_BANK1(FlashAddress)) +#endif /* FLASH_OPTCR_PG_OTP */ + { + bank = FLASH_BANK_1; + /* Prevent unused argument(s) compilation warning */ + UNUSED(TypeProgram); + } +#if defined (DUAL_BANK) + else if(IS_FLASH_PROGRAM_ADDRESS_BANK2(FlashAddress)) + { + bank = FLASH_BANK_2; + } +#endif /* DUAL_BANK */ + else + { + return HAL_ERROR; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, bank); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + pFlash.Address = FlashAddress; + +#if defined (DUAL_BANK) + if(bank == FLASH_BANK_1) + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_BANK1; + +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Set OTP_PG bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Set PG bit */ + SET_BIT(FLASH->CR1, FLASH_CR_PG); + } + + /* Enable End of Operation and Error interrupts for Bank 1 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1); +#else + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1); +#endif /* FLASH_CR_OPERRIE */ + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_BANK2; + + /* Set PG bit */ + SET_BIT(FLASH->CR2, FLASH_CR_PG); + + /* Enable End of Operation and Error interrupts for Bank2 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2); +#else + __HAL_FLASH_ENABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2); +#endif /* FLASH_CR_OPERRIE */ + } +#else /* Single Bank */ + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_BANK1; + +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Set OTP_PG bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Set PG bit */ + SET_BIT(FLASH->CR1, FLASH_CR_PG); + } + + /* Enable End of Operation and Error interrupts for Bank 1 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1); +#else + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1); +#endif /* FLASH_CR_OPERRIE */ +#endif /* DUAL_BANK */ + + __ISB(); + __DSB(); + +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Program an OTP word (16 bits) */ + *(__IO uint16_t *)FlashAddress = *(__IO uint16_t*)DataAddress; + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Program the flash word */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + row_index--; + } while (row_index != 0U); + } + + __ISB(); + __DSB(); + } + + return status; +} + +/** + * @brief This function handles FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t temp; + uint32_t errorflag; + FLASH_ProcedureTypeDef procedure; + + /* Check FLASH Bank1 End of Operation flag */ + if(__HAL_FLASH_GET_FLAG_BANK1(FLASH_SR_EOP) != RESET) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE_BANK1) + { + /* Nb of sector to erased can be decreased */ + pFlash.NbSectorsToErase--; + + /* Check if there are still sectors to erase */ + if(pFlash.NbSectorsToErase != 0U) + { + /* Indicate user which sector has been erased */ + HAL_FLASH_EndOfOperationCallback(pFlash.Sector); + + /* Clear bank 1 End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_EOP_BANK1); + + /* Increment sector number */ + pFlash.Sector++; + temp = pFlash.Sector; + FLASH_Erase_Sector(temp, FLASH_BANK_1, pFlash.VoltageForErase); + } + else + { + /* No more sectors to Erase, user callback can be called */ + /* Reset Sector and stop Erase sectors procedure */ + pFlash.Sector = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Sector); + + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_EOP_BANK1); + } + } + else + { + procedure = pFlash.ProcedureOnGoing; + + if((procedure == FLASH_PROC_MASSERASE_BANK1) || (procedure == FLASH_PROC_ALLBANK_MASSERASE)) + { + /* MassErase ended. Return the selected bank */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(FLASH_BANK_1); + } + else if(procedure == FLASH_PROC_PROGRAM_BANK1) + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else + { + /* Nothing to do */ + } + + if((procedure != FLASH_PROC_SECTERASE_BANK2) && \ + (procedure != FLASH_PROC_MASSERASE_BANK2) && \ + (procedure != FLASH_PROC_PROGRAM_BANK2)) + { + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_EOP_BANK1); + } + } + } + +#if defined (DUAL_BANK) + /* Check FLASH Bank2 End of Operation flag */ + if(__HAL_FLASH_GET_FLAG_BANK2(FLASH_SR_EOP) != RESET) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE_BANK2) + { + /*Nb of sector to erased can be decreased*/ + pFlash.NbSectorsToErase--; + + /* Check if there are still sectors to erase*/ + if(pFlash.NbSectorsToErase != 0U) + { + /*Indicate user which sector has been erased*/ + HAL_FLASH_EndOfOperationCallback(pFlash.Sector); + + /* Clear bank 2 End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_EOP_BANK2); + + /*Increment sector number*/ + pFlash.Sector++; + temp = pFlash.Sector; + FLASH_Erase_Sector(temp, FLASH_BANK_2, pFlash.VoltageForErase); + } + else + { + /* No more sectors to Erase, user callback can be called */ + /* Reset Sector and stop Erase sectors procedure */ + pFlash.Sector = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Sector); + + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_EOP_BANK2); + } + } + else + { + procedure = pFlash.ProcedureOnGoing; + + if((procedure == FLASH_PROC_MASSERASE_BANK2) || (procedure == FLASH_PROC_ALLBANK_MASSERASE)) + { + /*MassErase ended. Return the selected bank*/ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(FLASH_BANK_2); + } + else if(procedure == FLASH_PROC_PROGRAM_BANK2) + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else + { + /* Nothing to do */ + } + + if((procedure != FLASH_PROC_SECTERASE_BANK1) && \ + (procedure != FLASH_PROC_MASSERASE_BANK1) && \ + (procedure != FLASH_PROC_PROGRAM_BANK1)) + { + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_EOP_BANK2); + } + } + } +#endif /* DUAL_BANK */ + + /* Check FLASH Bank1 operation error flags */ +#if defined (FLASH_SR_OPERR) + errorflag = FLASH->SR1 & (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | FLASH_FLAG_STRBERR_BANK1 | \ + FLASH_FLAG_INCERR_BANK1 | FLASH_FLAG_OPERR_BANK1); +#else + errorflag = FLASH->SR1 & (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | FLASH_FLAG_STRBERR_BANK1 | \ + FLASH_FLAG_INCERR_BANK1); +#endif /* FLASH_SR_OPERR */ + + if(errorflag != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= errorflag; + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG_BANK1(errorflag); + + procedure = pFlash.ProcedureOnGoing; + + if(procedure == FLASH_PROC_SECTERASE_BANK1) + { + /* Return the faulty sector */ + temp = pFlash.Sector; + pFlash.Sector = 0xFFFFFFFFU; + } + else if((procedure == FLASH_PROC_MASSERASE_BANK1) || (procedure == FLASH_PROC_ALLBANK_MASSERASE)) + { + /* Return the faulty bank */ + temp = FLASH_BANK_1; + } + else + { + /* Return the faulty address */ + temp = pFlash.Address; + } + + /* Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(temp); + } + +#if (USE_FLASH_ECC == 1U) + /* Check FLASH Bank1 ECC single correction error flag */ + errorflag = FLASH->SR1 & FLASH_FLAG_SNECCERR_BANK1; + + if(errorflag != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= errorflag; + + /* Call User callback */ + HAL_FLASHEx_EccCorrectionCallback(); + + /* Clear FLASH Bank1 ECC single correction error flag in order to allow new ECC error record */ + __HAL_FLASH_CLEAR_FLAG_BANK1(errorflag); + } + + /* Check FLASH Bank1 ECC double detection error flag */ + errorflag = FLASH->SR1 & FLASH_FLAG_DBECCERR_BANK1; + + if(errorflag != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= errorflag; + + /* Call User callback */ + HAL_FLASHEx_EccDetectionCallback(); + + /* Clear FLASH Bank1 ECC double detection error flag in order to allow new ECC error record */ + __HAL_FLASH_CLEAR_FLAG_BANK1(errorflag); + } +#endif /* USE_FLASH_ECC */ + +#if defined (DUAL_BANK) + /* Check FLASH Bank2 operation error flags */ +#if defined (FLASH_SR_OPERR) + errorflag = FLASH->SR2 & ((FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | FLASH_FLAG_STRBERR_BANK2 | \ + FLASH_FLAG_INCERR_BANK2 | FLASH_FLAG_OPERR_BANK2) & 0x7FFFFFFFU); +#else + errorflag = FLASH->SR2 & ((FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | FLASH_FLAG_STRBERR_BANK2 | \ + FLASH_FLAG_INCERR_BANK2) & 0x7FFFFFFFU); +#endif /* FLASH_SR_OPERR */ + + if(errorflag != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= (errorflag | 0x80000000U); + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG_BANK2(errorflag); + + procedure = pFlash.ProcedureOnGoing; + + if(procedure== FLASH_PROC_SECTERASE_BANK2) + { + /*return the faulty sector*/ + temp = pFlash.Sector; + pFlash.Sector = 0xFFFFFFFFU; + } + else if((procedure == FLASH_PROC_MASSERASE_BANK2) || (procedure == FLASH_PROC_ALLBANK_MASSERASE)) + { + /*return the faulty bank*/ + temp = FLASH_BANK_2; + } + else + { + /*return the faulty address*/ + temp = pFlash.Address; + } + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(temp); + } + +#if (USE_FLASH_ECC == 1U) + /* Check FLASH Bank2 ECC single correction error flag */ + errorflag = FLASH->SR2 & FLASH_FLAG_SNECCERR_BANK2; + + if(errorflag != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= (errorflag | 0x80000000U); + + /* Call User callback */ + HAL_FLASHEx_EccCorrectionCallback(); + + /* Clear FLASH Bank2 ECC single correction error flag in order to allow new ECC error record */ + __HAL_FLASH_CLEAR_FLAG_BANK2(errorflag); + } + + /* Check FLASH Bank2 ECC double detection error flag */ + errorflag = FLASH->SR2 & FLASH_FLAG_DBECCERR_BANK2; + + if(errorflag != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= (errorflag | 0x80000000U); + + /* Call User callback */ + HAL_FLASHEx_EccDetectionCallback(); + + /* Clear FLASH Bank2 ECC double detection error flag in order to allow new ECC error record */ + __HAL_FLASH_CLEAR_FLAG_BANK2(errorflag); + } + +#endif /* USE_FLASH_ECC */ +#endif /* DUAL_BANK */ + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { +#if defined (FLASH_CR_OPERRIE) + /* Disable Bank1 Operation and Error source interrupt */ + __HAL_FLASH_DISABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1); + +#if defined (DUAL_BANK) + /* Disable Bank2 Operation and Error source interrupt */ + __HAL_FLASH_DISABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2); +#endif /* DUAL_BANK */ +#else + /* Disable Bank1 Operation and Error source interrupt */ + __HAL_FLASH_DISABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1); + +#if defined (DUAL_BANK) + /* Disable Bank2 Operation and Error source interrupt */ + __HAL_FLASH_DISABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2); +#endif /* DUAL_BANK */ +#endif /* FLASH_CR_OPERRIE */ + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Sectors Erase: Sector which has been erased + * (if 0xFFFFFFFF, it means that all the selected sectors have been erased) + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Sectors Erase: Sector number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + if(READ_BIT(FLASH->CR1, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Bank1 Registers access */ + WRITE_REG(FLASH->KEYR1, FLASH_KEY1); + WRITE_REG(FLASH->KEYR1, FLASH_KEY2); + + /* Verify Flash Bank1 is unlocked */ + if (READ_BIT(FLASH->CR1, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } + +#if defined (DUAL_BANK) + if(READ_BIT(FLASH->CR2, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Bank2 Registers access */ + WRITE_REG(FLASH->KEYR2, FLASH_KEY1); + WRITE_REG(FLASH->KEYR2, FLASH_KEY2); + + /* Verify Flash Bank2 is unlocked */ + if (READ_BIT(FLASH->CR2, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } +#endif /* DUAL_BANK */ + + return HAL_OK; +} + +/** + * @brief Locks the FLASH control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Bank1 Control Register access */ + SET_BIT(FLASH->CR1, FLASH_CR_LOCK); + + /* Verify Flash Bank1 is locked */ + if (READ_BIT(FLASH->CR1, FLASH_CR_LOCK) == 0U) + { + return HAL_ERROR; + } + +#if defined (DUAL_BANK) + /* Set the LOCK Bit to lock the FLASH Bank2 Control Register access */ + SET_BIT(FLASH->CR2, FLASH_CR_LOCK); + + /* Verify Flash Bank2 is locked */ + if (READ_BIT(FLASH->CR2, FLASH_CR_LOCK) == 0U) + { + return HAL_ERROR; + } +#endif /* DUAL_BANK */ + + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if(READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) != 0U) + { + /* Authorizes the Option Byte registers programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPT_KEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPT_KEY2); + + /* Verify that the Option Bytes are unlocked */ + if (READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) != 0U) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK); + + /* Verify that the Option Bytes are locked */ + if (READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) == 0U) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Launch the option bytes loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + HAL_StatusTypeDef status; + + /* Wait for CRC computation to be completed */ + if (FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } +#if defined (DUAL_BANK) + else if (FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } +#endif /* DUAL_BANK */ + else + { + status = HAL_OK; + } + + if (status == HAL_OK) + { + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTSTART); + + /* Wait for OB change operation to be completed */ + status = FLASH_OB_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } + + return status; +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval HAL_FLASH_ERRORCode The returned value can be: + * @arg HAL_FLASH_ERROR_NONE : No error set + * + * @arg HAL_FLASH_ERROR_WRP_BANK1 : Write Protection Error on Bank 1 + * @arg HAL_FLASH_ERROR_PGS_BANK1 : Program Sequence Error on Bank 1 + * @arg HAL_FLASH_ERROR_STRB_BANK1 : Strobe Error on Bank 1 + * @arg HAL_FLASH_ERROR_INC_BANK1 : Inconsistency Error on Bank 1 + * @arg HAL_FLASH_ERROR_OPE_BANK1 : Operation Error on Bank 1 + * @arg HAL_FLASH_ERROR_RDP_BANK1 : Read Protection Error on Bank 1 + * @arg HAL_FLASH_ERROR_RDS_BANK1 : Read Secured Error on Bank 1 + * @arg HAL_FLASH_ERROR_SNECC_BANK1: ECC Single Correction Error on Bank 1 + * @arg HAL_FLASH_ERROR_DBECC_BANK1: ECC Double Detection Error on Bank 1 + * @arg HAL_FLASH_ERROR_CRCRD_BANK1: CRC Read Error on Bank 1 + * + * @arg HAL_FLASH_ERROR_WRP_BANK2 : Write Protection Error on Bank 2 + * @arg HAL_FLASH_ERROR_PGS_BANK2 : Program Sequence Error on Bank 2 + * @arg HAL_FLASH_ERROR_STRB_BANK2 : Strobe Error on Bank 2 + * @arg HAL_FLASH_ERROR_INC_BANK2 : Inconsistency Error on Bank 2 + * @arg HAL_FLASH_ERROR_OPE_BANK2 : Operation Error on Bank 2 + * @arg HAL_FLASH_ERROR_RDP_BANK2 : Read Protection Error on Bank 2 + * @arg HAL_FLASH_ERROR_RDS_BANK2 : Read Secured Error on Bank 2 + * @arg HAL_FLASH_ERROR_SNECC_BANK2: SNECC Error on Bank 2 + * @arg HAL_FLASH_ERROR_DBECC_BANK2: Double Detection ECC on Bank 2 + * @arg HAL_FLASH_ERROR_CRCRD_BANK2: CRC Read Error on Bank 2 + */ + +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @param Bank flash FLASH_BANK_1 or FLASH_BANK_2 + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout, uint32_t Bank) +{ + /* Wait for the FLASH operation to complete by polling on QW flag to be reset. + Even if the FLASH operation fails, the QW flag will be reset and an error + flag will be set */ + + uint32_t bsyflag = FLASH_FLAG_QW_BANK1; + uint32_t errorflag = 0; + uint32_t tickstart = HAL_GetTick(); + + assert_param(IS_FLASH_BANK_EXCLUSIVE(Bank)); + +#if defined (DUAL_BANK) + + if (Bank == FLASH_BANK_2) + { + /* Select bsyflag depending on Bank */ + bsyflag = FLASH_FLAG_QW_BANK2; + } +#endif /* DUAL_BANK */ + + while(__HAL_FLASH_GET_FLAG(bsyflag)) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Get Error Flags */ + if (Bank == FLASH_BANK_1) + { + errorflag = FLASH->SR1 & FLASH_FLAG_ALL_ERRORS_BANK1; + } +#if defined (DUAL_BANK) + else + { + errorflag = (FLASH->SR2 & FLASH_FLAG_ALL_ERRORS_BANK2) | 0x80000000U; + } +#endif /* DUAL_BANK */ + + /* In case of error reported in Flash SR1 or SR2 register */ + if((errorflag & 0x7FFFFFFFU) != 0U) + { + /*Save the error code*/ + pFlash.ErrorCode |= errorflag; + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG(errorflag); + + return HAL_ERROR; + } + + /* Check FLASH End of Operation flag */ + if(Bank == FLASH_BANK_1) + { + if (__HAL_FLASH_GET_FLAG_BANK1(FLASH_FLAG_EOP_BANK1)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_EOP_BANK1); + } + } +#if defined (DUAL_BANK) + else + { + if (__HAL_FLASH_GET_FLAG_BANK2(FLASH_FLAG_EOP_BANK2)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_EOP_BANK2); + } + } +#endif /* DUAL_BANK */ + + return HAL_OK; +} + +/** + * @brief Wait for a FLASH Option Bytes change operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_OB_WaitForLastOperation(uint32_t Timeout) +{ + /* Get timeout */ + uint32_t tickstart = HAL_GetTick(); + + /* Wait for the FLASH Option Bytes change operation to complete by polling on OPT_BUSY flag to be reset */ + while(READ_BIT(FLASH->OPTSR_CUR, FLASH_OPTSR_OPT_BUSY) != 0U) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check option byte change error */ + if(READ_BIT(FLASH->OPTSR_CUR, FLASH_OPTSR_OPTCHANGEERR) != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= HAL_FLASH_ERROR_OB_CHANGE; + + /* Clear the OB error flag */ + FLASH->OPTCCR |= FLASH_OPTCCR_CLR_OPTCHANGEERR; + + return HAL_ERROR; + } + + /* If there is no error flag set */ + return HAL_OK; +} + +/** + * @brief Wait for a FLASH CRC computation to complete. + * @param Timeout maximum flash operation timeout + * @param Bank flash FLASH_BANK_1 or FLASH_BANK_2 + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout, uint32_t Bank) +{ + uint32_t bsyflag; + uint32_t tickstart = HAL_GetTick(); + + assert_param(IS_FLASH_BANK_EXCLUSIVE(Bank)); + + /* Select bsyflag depending on Bank */ + if(Bank == FLASH_BANK_1) + { + bsyflag = FLASH_FLAG_CRC_BUSY_BANK1; + } + else + { + bsyflag = FLASH_FLAG_CRC_BUSY_BANK2; + } + + /* Wait for the FLASH CRC computation to complete by polling on CRC_BUSY flag to be reset */ + while(__HAL_FLASH_GET_FLAG(bsyflag)) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH CRC read error flag */ + if(Bank == FLASH_BANK_1) + { + if (__HAL_FLASH_GET_FLAG_BANK1(FLASH_FLAG_CRCRDERR_BANK1)) + { + /* Save the error code */ + pFlash.ErrorCode |= HAL_FLASH_ERROR_CRCRD_BANK1; + + /* Clear FLASH CRC read error pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_CRCRDERR_BANK1); + + return HAL_ERROR; + } + } +#if defined (DUAL_BANK) + else + { + if (__HAL_FLASH_GET_FLAG_BANK2(FLASH_FLAG_CRCRDERR_BANK2)) + { + /* Save the error code */ + pFlash.ErrorCode |= HAL_FLASH_ERROR_CRCRD_BANK2; + + /* Clear FLASH CRC read error pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_CRCRDERR_BANK2); + + return HAL_ERROR; + } + } +#endif /* DUAL_BANK */ + + /* If there is no error flag set */ + return HAL_OK; +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c new file mode 100644 index 0000000..c302c70 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c @@ -0,0 +1,2115 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extension peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extension features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32H7xx + devices contains the following additional features + + (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write + capability (RWW) + (+) Dual bank memory organization + (+) PCROP protection for all banks + (+) Global readout protection (RDP) + (+) Write protection + (+) Secure access only protection + (+) Bank / register swapping (when Dual-Bank) + (+) Cyclic Redundancy Check (CRC) + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32H7xx devices. It includes + (#) FLASH Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Sector erase, bank erase and dual-bank mass erase + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to: + (++) Set/Reset the write protection per bank + (++) Set the Read protection Level + (++) Set the BOR level + (++) Program the user Option Bytes + (++) PCROP protection configuration and control per bank + (++) Secure area configuration and control per bank + (++) Core Boot address configuration + (++) TCM / AXI shared RAM configuration + (++) CPU Frequency Boost configuration + + (#) FLASH Memory Lock and unlock per Bank: HAL_FLASHEx_Lock_Bank1(), HAL_FLASHEx_Unlock_Bank1(), + HAL_FLASHEx_Lock_Bank2() and HAL_FLASHEx_Unlock_Bank2() functions + + (#) FLASH CRC computation function: Use HAL_FLASHEx_ComputeCRC() to: + (++) Enable CRC feature + (++) Program the desired burst size + (++) Define the user Flash Area on which the CRC has be computed + (++) Perform the CRC computation + (++) Disable CRC feature + + (#) Error correction code error functions: + (++) Use the HAL_FLASHEx_EnableEccCorrectionInterrupt() and HAL_FLASHEx_DisableEccCorrectionInterrupt() + functions to enable and disable the FLASH ECC correction interruption. + (++) Use the HAL_FLASHEx_EnableEccDetectionInterrupt() and HAL_FLASHEx_DisableEccDetectionInterrupt() + functions to enable and disable the FLASH ECC Detection interruption. + (++) Handle ECCD interrupt by calling HAL_FLASHEx_BusFault_IRQHandler() + (++) Use HAL_FLASHEx_BusFault_IRQHandler() function called under BusFault_IRQHandler() interrupt subroutine + to handle the ECCD interrupt. + (++) Use HAL_FLASHEx_GetEccInfo() function to get the flash ECC fail information. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH HAL Extension module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ + +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(uint32_t VoltageRange, uint32_t Banks); +static void FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks); +static void FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Bank); +static void FLASH_OB_GetWRP(uint32_t *WRPState, uint32_t *WRPSector, uint32_t Bank); +static void FLASH_OB_RDPConfig(uint32_t RDPLevel); +static uint32_t FLASH_OB_GetRDP(void); +static void FLASH_OB_PCROPConfig(uint32_t PCROConfigRDP, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr, uint32_t Banks); +static void FLASH_OB_GetPCROP(uint32_t *PCROPConfig, uint32_t *PCROPStartAddr,uint32_t *PCROPEndAddr, uint32_t Bank); +static void FLASH_OB_BOR_LevelConfig(uint32_t Level); +static uint32_t FLASH_OB_GetBOR(void); +static void FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig); +static uint32_t FLASH_OB_GetUser(void); +static void FLASH_OB_BootAddConfig(uint32_t BootOption, uint32_t BootAddress0, uint32_t BootAddress1); +static void FLASH_OB_GetBootAdd(uint32_t *BootAddress0, uint32_t *BootAddress1); +static void FLASH_OB_SecureAreaConfig(uint32_t SecureAreaConfig, uint32_t SecureAreaStartAddr, uint32_t SecureAreaEndAddr, uint32_t Banks); +static void FLASH_OB_GetSecureArea(uint32_t *SecureAreaConfig, uint32_t *SecureAreaStartAddr, uint32_t *SecureAreaEndAddr, uint32_t Bank); +static void FLASH_CRC_AddSector(uint32_t Sector, uint32_t Bank); +static void FLASH_CRC_SelectAddress(uint32_t CRCStartAddr, uint32_t CRCEndAddr, uint32_t Bank); + +#if defined (DUAL_CORE) +static void FLASH_OB_CM4BootAddConfig(uint32_t BootOption, uint32_t BootAddress0, uint32_t BootAddress1); +static void FLASH_OB_GetCM4BootAdd(uint32_t *BootAddress0, uint32_t *BootAddress1); +#endif /*DUAL_CORE*/ + +#if defined (FLASH_OTPBL_LOCKBL) +static void FLASH_OB_OTP_LockConfig(uint32_t OTP_Block); +static uint32_t FLASH_OB_OTP_GetLock(void); +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +static void FLASH_OB_SharedRAM_Config(uint32_t SharedRamConfig); +static uint32_t FLASH_OB_SharedRAM_GetConfig(void); +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +static void FLASH_OB_CPUFreq_BoostConfig(uint32_t FreqBoost); +static uint32_t FLASH_OB_CPUFreq_GetBoost(void); +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extension FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory sectors + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] SectorError pointer to variable that contains the configuration + * information on faulty sector in case of error (0xFFFFFFFF means that all + * the sectors have been correctly erased) + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t sector_index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + assert_param(IS_FLASH_BANK(pEraseInit->Banks)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed on Bank1 */ + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } + } + +#if defined (DUAL_BANK) + /* Wait for last operation to be completed on Bank2 */ + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } + } +#endif /* DUAL_BANK */ + + if(status == HAL_OK) + { + if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + FLASH_MassErase(pEraseInit->VoltageRange, pEraseInit->Banks); + + /* Wait for last operation to be completed on Bank 1 */ + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } + /* if the erase operation is completed, disable the Bank1 BER Bit */ + FLASH->CR1 &= (~FLASH_CR_BER); + } +#if defined (DUAL_BANK) + /* Wait for last operation to be completed on Bank 2 */ + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } + /* if the erase operation is completed, disable the Bank2 BER Bit */ + FLASH->CR2 &= (~FLASH_CR_BER); + } +#endif /* DUAL_BANK */ + } + else + { + /*Initialization of SectorError variable*/ + *SectorError = 0xFFFFFFFFU; + + /* Erase by sector by sector to be done*/ + for(sector_index = pEraseInit->Sector; sector_index < (pEraseInit->NbSectors + pEraseInit->Sector); sector_index++) + { + FLASH_Erase_Sector(sector_index, pEraseInit->Banks, pEraseInit->VoltageRange); + + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1); + + /* If the erase operation is completed, disable the SER Bit */ + FLASH->CR1 &= (~(FLASH_CR_SER | FLASH_CR_SNB)); + } +#if defined (DUAL_BANK) + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2); + + /* If the erase operation is completed, disable the SER Bit */ + FLASH->CR2 &= (~(FLASH_CR_SER | FLASH_CR_SNB)); + } +#endif /* DUAL_BANK */ + + if(status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty sector */ + *SectorError = sector_index; + break; + } + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + assert_param(IS_FLASH_BANK(pEraseInit->Banks)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed on Bank 1 */ + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } + } + +#if defined (DUAL_BANK) + /* Wait for last operation to be completed on Bank 2 */ + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } + } +#endif /* DUAL_BANK */ + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Enable End of Operation and Error interrupts for Bank 1 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1); +#else + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1); +#endif /* FLASH_CR_OPERRIE */ + } +#if defined (DUAL_BANK) + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Enable End of Operation and Error interrupts for Bank 2 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2); +#else + __HAL_FLASH_ENABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2); +#endif /* FLASH_CR_OPERRIE */ + } +#endif /* DUAL_BANK */ + + if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /*Mass erase to be done*/ + if(pEraseInit->Banks == FLASH_BANK_1) + { + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE_BANK1; + } +#if defined (DUAL_BANK) + else if(pEraseInit->Banks == FLASH_BANK_2) + { + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE_BANK2; + } +#endif /* DUAL_BANK */ + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_ALLBANK_MASSERASE; + } + + FLASH_MassErase(pEraseInit->VoltageRange, pEraseInit->Banks); + } + else + { + /* Erase by sector to be done */ +#if defined (DUAL_BANK) + if(pEraseInit->Banks == FLASH_BANK_1) + { + pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE_BANK1; + } + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE_BANK2; + } +#else + pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE_BANK1; +#endif /* DUAL_BANK */ + + pFlash.NbSectorsToErase = pEraseInit->NbSectors; + pFlash.Sector = pEraseInit->Sector; + pFlash.VoltageForErase = pEraseInit->VoltageRange; + + /* Erase first sector and wait for IT */ + FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->Banks, pEraseInit->VoltageRange); + } + } + + return status; +} + +/** + * @brief Program option bytes + * @param pOBInit pointer to an FLASH_OBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset Error Code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } +#if defined (DUAL_BANK) + else if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } +#endif /* DUAL_BANK */ + else + { + status = HAL_OK; + } + + if(status == HAL_OK) + { + /*Write protection configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + { + assert_param(IS_WRPSTATE(pOBInit->WRPState)); + + if(pOBInit->WRPState == OB_WRPSTATE_ENABLE) + { + /*Enable of Write protection on the selected Sector*/ + FLASH_OB_EnableWRP(pOBInit->WRPSector,pOBInit->Banks); + } + else + { + /*Disable of Write protection on the selected Sector*/ + FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks); + } + } + + /* Read protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_RDP) != 0U) + { + /* Configure the Read protection level */ + FLASH_OB_RDPConfig(pOBInit->RDPLevel); + } + + /* User Configuration */ + if((pOBInit->OptionType & OPTIONBYTE_USER) != 0U) + { + /* Configure the user option bytes */ + FLASH_OB_UserConfig(pOBInit->USERType, pOBInit->USERConfig); + } + + /* PCROP Configuration */ + if((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0U) + { + assert_param(IS_FLASH_BANK(pOBInit->Banks)); + + /*Configure the Proprietary code readout protection */ + FLASH_OB_PCROPConfig(pOBInit->PCROPConfig, pOBInit->PCROPStartAddr, pOBInit->PCROPEndAddr, pOBInit->Banks); + } + + /* BOR Level configuration */ + if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) + { + FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel); + } + +#if defined(DUAL_CORE) + /* CM7 Boot Address configuration */ + if((pOBInit->OptionType & OPTIONBYTE_CM7_BOOTADD) == OPTIONBYTE_CM7_BOOTADD) + { + FLASH_OB_BootAddConfig(pOBInit->BootConfig, pOBInit->BootAddr0, pOBInit->BootAddr1); + } + + /* CM4 Boot Address configuration */ + if((pOBInit->OptionType & OPTIONBYTE_CM4_BOOTADD) == OPTIONBYTE_CM4_BOOTADD) + { + FLASH_OB_CM4BootAddConfig(pOBInit->CM4BootConfig, pOBInit->CM4BootAddr0, pOBInit->CM4BootAddr1); + } +#else /* Single Core*/ + /* Boot Address configuration */ + if((pOBInit->OptionType & OPTIONBYTE_BOOTADD) == OPTIONBYTE_BOOTADD) + { + FLASH_OB_BootAddConfig(pOBInit->BootConfig, pOBInit->BootAddr0, pOBInit->BootAddr1); + } +#endif /*DUAL_CORE*/ + + /* Secure area configuration */ + if((pOBInit->OptionType & OPTIONBYTE_SECURE_AREA) == OPTIONBYTE_SECURE_AREA) + { + FLASH_OB_SecureAreaConfig(pOBInit->SecureAreaConfig, pOBInit->SecureAreaStartAddr, pOBInit->SecureAreaEndAddr,pOBInit->Banks); + } + +#if defined(FLASH_OTPBL_LOCKBL) + /* OTP Block Lock configuration */ + if((pOBInit->OptionType & OPTIONBYTE_OTP_LOCK) == OPTIONBYTE_OTP_LOCK) + { + FLASH_OB_OTP_LockConfig(pOBInit->OTPBlockLock); + } +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined(FLASH_OPTSR2_TCM_AXI_SHARED) + /* TCM / AXI Shared RAM configuration */ + if((pOBInit->OptionType & OPTIONBYTE_SHARED_RAM) == OPTIONBYTE_SHARED_RAM) + { + FLASH_OB_SharedRAM_Config(pOBInit->SharedRamConfig); + } +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined(FLASH_OPTSR2_CPUFREQ_BOOST) + /* CPU Frequency Boost configuration */ + if((pOBInit->OptionType & OPTIONBYTE_FREQ_BOOST) == OPTIONBYTE_FREQ_BOOST) + { + FLASH_OB_CPUFreq_BoostConfig(pOBInit->FreqBoostState); + } +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option byte configuration + * @param pOBInit pointer to an FLASH_OBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * @note The parameter Banks of the pOBInit structure must be set exclusively to FLASH_BANK_1 or FLASH_BANK_2, + * as this parameter is use to get the given Bank WRP, PCROP and secured area configuration. + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = (OPTIONBYTE_USER | OPTIONBYTE_RDP | OPTIONBYTE_BOR); + + /* Get Read protection level */ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /* Get the user option bytes */ + pOBInit->USERConfig = FLASH_OB_GetUser(); + + /*Get BOR Level*/ + pOBInit->BORLevel = FLASH_OB_GetBOR(); + +#if defined (DUAL_BANK) + if ((pOBInit->Banks == FLASH_BANK_1) || (pOBInit->Banks == FLASH_BANK_2)) +#else + if (pOBInit->Banks == FLASH_BANK_1) +#endif /* DUAL_BANK */ + { + pOBInit->OptionType |= (OPTIONBYTE_WRP | OPTIONBYTE_PCROP | OPTIONBYTE_SECURE_AREA); + + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(&(pOBInit->WRPState), &(pOBInit->WRPSector), pOBInit->Banks); + + /* Get the Proprietary code readout protection */ + FLASH_OB_GetPCROP(&(pOBInit->PCROPConfig), &(pOBInit->PCROPStartAddr), &(pOBInit->PCROPEndAddr), pOBInit->Banks); + + /*Get Bank Secure area*/ + FLASH_OB_GetSecureArea(&(pOBInit->SecureAreaConfig), &(pOBInit->SecureAreaStartAddr), &(pOBInit->SecureAreaEndAddr), pOBInit->Banks); + } + + /*Get Boot Address*/ + FLASH_OB_GetBootAdd(&(pOBInit->BootAddr0), &(pOBInit->BootAddr1)); +#if defined(DUAL_CORE) + pOBInit->OptionType |= OPTIONBYTE_CM7_BOOTADD | OPTIONBYTE_CM4_BOOTADD; + + /*Get CM4 Boot Address*/ + FLASH_OB_GetCM4BootAdd(&(pOBInit->CM4BootAddr0), &(pOBInit->CM4BootAddr1)); +#else + pOBInit->OptionType |= OPTIONBYTE_BOOTADD; +#endif /*DUAL_CORE*/ + +#if defined (FLASH_OTPBL_LOCKBL) + pOBInit->OptionType |= OPTIONBYTE_OTP_LOCK; + + /* Get OTP Block Lock */ + pOBInit->OTPBlockLock = FLASH_OB_OTP_GetLock(); +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) + pOBInit->OptionType |= OPTIONBYTE_SHARED_RAM; + + /* Get TCM / AXI Shared RAM */ + pOBInit->SharedRamConfig = FLASH_OB_SharedRAM_GetConfig(); +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) + pOBInit->OptionType |= OPTIONBYTE_FREQ_BOOST; + + /* Get CPU Frequency Boost */ + pOBInit->FreqBoostState = FLASH_OB_CPUFreq_GetBoost(); +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ +} + +/** + * @brief Unlock the FLASH Bank1 control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Unlock_Bank1(void) +{ + if(READ_BIT(FLASH->CR1, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Bank1 Registers access */ + WRITE_REG(FLASH->KEYR1, FLASH_KEY1); + WRITE_REG(FLASH->KEYR1, FLASH_KEY2); + + /* Verify Flash Bank1 is unlocked */ + if (READ_BIT(FLASH->CR1, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Locks the FLASH Bank1 control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Lock_Bank1(void) +{ + /* Set the LOCK Bit to lock the FLASH Bank1 Registers access */ + SET_BIT(FLASH->CR1, FLASH_CR_LOCK); + return HAL_OK; +} + +#if defined (DUAL_BANK) +/** + * @brief Unlock the FLASH Bank2 control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Unlock_Bank2(void) +{ + if(READ_BIT(FLASH->CR2, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Bank2 Registers access */ + WRITE_REG(FLASH->KEYR2, FLASH_KEY1); + WRITE_REG(FLASH->KEYR2, FLASH_KEY2); + + /* Verify Flash Bank1 is unlocked */ + if (READ_BIT(FLASH->CR2, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Locks the FLASH Bank2 control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Lock_Bank2(void) +{ + /* Set the LOCK Bit to lock the FLASH Bank2 Registers access */ + SET_BIT(FLASH->CR2, FLASH_CR_LOCK); + return HAL_OK; +} +#endif /* DUAL_BANK */ + +/* + * @brief Perform a CRC computation on the specified FLASH memory area + * @param pCRCInit pointer to an FLASH_CRCInitTypeDef structure that + * contains the configuration information for the CRC computation. + * @note CRC computation uses CRC-32 (Ethernet) polynomial 0x4C11DB7 + * @note The application should avoid running a CRC on PCROP or secure-only + * user Flash memory area since it may alter the expected CRC value. + * A special error flag (CRC read error: CRCRDERR) can be used to + * detect such a case. + * @retval HAL Status +*/ +HAL_StatusTypeDef HAL_FLASHEx_ComputeCRC(FLASH_CRCInitTypeDef *pCRCInit, uint32_t *CRC_Result) +{ + HAL_StatusTypeDef status; + uint32_t sector_index; + + /* Check the parameters */ + assert_param(IS_FLASH_BANK_EXCLUSIVE(pCRCInit->Bank)); + assert_param(IS_FLASH_TYPECRC(pCRCInit->TypeCRC)); + + /* Wait for OB change operation to be completed */ + status = FLASH_OB_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (pCRCInit->Bank == FLASH_BANK_1) + { + /* Enable CRC feature */ + FLASH->CR1 |= FLASH_CR_CRC_EN; + + /* Clear CRC flags in Status Register: CRC end of calculation and CRC read error */ + FLASH->CCR1 |= (FLASH_CCR_CLR_CRCEND | FLASH_CCR_CLR_CRCRDERR); + + /* Clear current CRC result, program burst size and define memory area on which CRC has to be computed */ + FLASH->CRCCR1 |= FLASH_CRCCR_CLEAN_CRC | pCRCInit->BurstSize | pCRCInit->TypeCRC; + + if (pCRCInit->TypeCRC == FLASH_CRC_SECTORS) + { + /* Clear sectors list */ + FLASH->CRCCR1 |= FLASH_CRCCR_CLEAN_SECT; + + /* Select CRC sectors */ + for(sector_index = pCRCInit->Sector; sector_index < (pCRCInit->NbSectors + pCRCInit->Sector); sector_index++) + { + FLASH_CRC_AddSector(sector_index, FLASH_BANK_1); + } + } + else if (pCRCInit->TypeCRC == FLASH_CRC_BANK) + { + /* Enable Bank 1 CRC select bit */ + FLASH->CRCCR1 |= FLASH_CRCCR_ALL_BANK; + } + else + { + /* Select CRC start and end addresses */ + FLASH_CRC_SelectAddress(pCRCInit->CRCStartAddr, pCRCInit->CRCEndAddr, FLASH_BANK_1); + } + + /* Start the CRC calculation */ + FLASH->CRCCR1 |= FLASH_CRCCR_START_CRC; + + /* Wait on CRC busy flag */ + status = FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1); + + /* Return CRC result */ + (*CRC_Result) = FLASH->CRCDATA; + + /* Disable CRC feature */ + FLASH->CR1 &= (~FLASH_CR_CRC_EN); + + /* Clear CRC flags */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_CRCEND_BANK1 | FLASH_FLAG_CRCRDERR_BANK1); + } +#if defined (DUAL_BANK) + else + { + /* Enable CRC feature */ + FLASH->CR2 |= FLASH_CR_CRC_EN; + + /* Clear CRC flags in Status Register: CRC end of calculation and CRC read error */ + FLASH->CCR2 |= (FLASH_CCR_CLR_CRCEND | FLASH_CCR_CLR_CRCRDERR); + + /* Clear current CRC result, program burst size and define memory area on which CRC has to be computed */ + FLASH->CRCCR2 |= FLASH_CRCCR_CLEAN_CRC | pCRCInit->BurstSize | pCRCInit->TypeCRC; + + if (pCRCInit->TypeCRC == FLASH_CRC_SECTORS) + { + /* Clear sectors list */ + FLASH->CRCCR2 |= FLASH_CRCCR_CLEAN_SECT; + + /* Add CRC sectors */ + for(sector_index = pCRCInit->Sector; sector_index < (pCRCInit->NbSectors + pCRCInit->Sector); sector_index++) + { + FLASH_CRC_AddSector(sector_index, FLASH_BANK_2); + } + } + else if (pCRCInit->TypeCRC == FLASH_CRC_BANK) + { + /* Enable Bank 2 CRC select bit */ + FLASH->CRCCR2 |= FLASH_CRCCR_ALL_BANK; + } + else + { + /* Select CRC start and end addresses */ + FLASH_CRC_SelectAddress(pCRCInit->CRCStartAddr, pCRCInit->CRCEndAddr, FLASH_BANK_2); + } + + /* Start the CRC calculation */ + FLASH->CRCCR2 |= FLASH_CRCCR_START_CRC; + + /* Wait on CRC busy flag */ + status = FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2); + + /* Return CRC result */ + (*CRC_Result) = FLASH->CRCDATA; + + /* Disable CRC feature */ + FLASH->CR2 &= (~FLASH_CR_CRC_EN); + + /* Clear CRC flags */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_CRCEND_BANK2 | FLASH_FLAG_CRCRDERR_BANK2); + } +#endif /* DUAL_BANK */ + } + + return status; +} + +/** + * @} + */ + +#if (USE_FLASH_ECC == 1U) +/** @defgroup FLASHEx_Exported_Functions_Group2 Extended ECC operation functions + * @brief Extended ECC operation functions + * +@verbatim + =============================================================================== + ##### Extended ECC operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + ECC Operations. + +@endverbatim + * @{ + */ + +/** + * @brief Enable ECC correction interrupts on FLASH BANK1 and BANK2. + * @param None + * @retval None + */ +void HAL_FLASHEx_EnableEccCorrectionInterrupt(void) +{ + __HAL_FLASH_ENABLE_IT(FLASH_IT_SNECCERR_BANK1); + +#if defined (DUAL_BANK) + __HAL_FLASH_ENABLE_IT(FLASH_IT_SNECCERR_BANK2); +#endif /* DUAL_BANK */ +} + +/** + * @brief Disable ECC correction interrupts on FLASH BANK1 and BANK2. + * @param None + * @retval None + */ +void HAL_FLASHEx_DisableEccCorrectionInterrupt(void) +{ + __HAL_FLASH_DISABLE_IT(FLASH_IT_SNECCERR_BANK1); + +#if defined (DUAL_BANK) + __HAL_FLASH_DISABLE_IT(FLASH_IT_SNECCERR_BANK2); +#endif /* DUAL_BANK */ +} + +/** + * @brief Enable ECC correction interrupt on FLASH BANK1. + * @param None + * @retval None + */ +void HAL_FLASHEx_EnableEccCorrectionInterrupt_Bank1(void) +{ + __HAL_FLASH_ENABLE_IT(FLASH_IT_SNECCERR_BANK1); +} + +/** + * @brief Disable ECC correction interrupt on FLASH BANK1. + * @param None + * @retval None + */ +void HAL_FLASHEx_DisableEccCorrectionInterrupt_Bank1(void) +{ + __HAL_FLASH_DISABLE_IT(FLASH_IT_SNECCERR_BANK1); +} + +#if defined (DUAL_BANK) +/** + * @brief Enable ECC correction interrupt on FLASH BANK2. + * @param None + * @retval None + */ +void HAL_FLASHEx_EnableEccCorrectionInterrupt_Bank2(void) +{ + __HAL_FLASH_ENABLE_IT(FLASH_IT_SNECCERR_BANK2); +} + +/** + * @brief Disable ECC correction interrupt on FLASH BANK2. + * @param None + * @retval None + */ +void HAL_FLASHEx_DisableEccCorrectionInterrupt_Bank2(void) +{ + __HAL_FLASH_DISABLE_IT(FLASH_IT_SNECCERR_BANK2); +} +#endif /* DUAL_BANK */ + +/** + * @brief Enable ECC Detection interrupts on FLASH BANK1 and BANK2. + * @param None + * @retval None + */ +void HAL_FLASHEx_EnableEccDetectionInterrupt(void) +{ + __HAL_FLASH_ENABLE_IT(FLASH_IT_DBECCERR_BANK1); + +#if defined (DUAL_BANK) + __HAL_FLASH_ENABLE_IT(FLASH_IT_DBECCERR_BANK2); +#endif /* DUAL_BANK */ +} + +/** + * @brief Disable ECC Detection interrupts on FLASH BANK1 and BANK2. + * @param None + * @retval None + */ +void HAL_FLASHEx_DisableEccDetectionInterrupt(void) +{ + __HAL_FLASH_DISABLE_IT(FLASH_IT_DBECCERR_BANK1); + +#if defined (DUAL_BANK) + __HAL_FLASH_DISABLE_IT(FLASH_IT_DBECCERR_BANK2); +#endif /* DUAL_BANK */ +} + +/** + * @brief Enable ECC Detection interrupt on FLASH BANK1. + * @param None + * @retval None + */ +void HAL_FLASHEx_EnableEccDetectionInterrupt_Bank1(void) +{ + __HAL_FLASH_ENABLE_IT(FLASH_IT_DBECCERR_BANK1); +} + +/** + * @brief Disable ECC correction interrupt on FLASH BANK1. + * @param None + * @retval None + */ +void HAL_FLASHEx_DisableEccDetectionInterrupt_Bank1(void) +{ + __HAL_FLASH_DISABLE_IT(FLASH_IT_DBECCERR_BANK1); +} + +#if defined (DUAL_BANK) +/** + * @brief Enable ECC Detection interrupt on FLASH BANK2. + * @param None + * @retval None + */ +void HAL_FLASHEx_EnableEccDetectionInterrupt_Bank2(void) +{ + __HAL_FLASH_ENABLE_IT(FLASH_IT_DBECCERR_BANK2); +} + +/** + * @brief Disable ECC Detection interrupt on FLASH BANK2. + * @param None + * @retval None + */ +void HAL_FLASHEx_DisableEccDetectionInterrupt_Bank2(void) +{ + __HAL_FLASH_DISABLE_IT(FLASH_IT_DBECCERR_BANK2); +} +#endif /* DUAL_BANK */ + +/** + * @brief Get the ECC error information. + * @param pData Pointer to an FLASH_EccInfoTypeDef structure that contains the + * ECC error information. + * @note This function should be called before ECC bit is cleared + * (in callback function) + * @retval None + */ +void HAL_FLASHEx_GetEccInfo(FLASH_EccInfoTypeDef *pData) +{ + uint32_t errorflag; + + /* Check FLASH Bank1 ECC single correction and double detection error flags */ + errorflag = FLASH->SR1 & (FLASH_FLAG_SNECCERR_BANK1 | FLASH_FLAG_DBECCERR_BANK1); + if(errorflag != 0U) + { + pData->Area = FLASH_ECC_AREA_USER_BANK1; + pData->Address = ((((FLASH->ECC_FA1 & FLASH_ECC_FA_FAIL_ECC_ADDR))* FLASH_NB_32BITWORD_IN_FLASHWORD * 4) + FLASH_BANK1_BASE); + } +#if defined (DUAL_BANK) + /* Check FLASH Bank2 ECC single correction and double detection error flags */ + errorflag = FLASH->SR2 & (FLASH_FLAG_SNECCERR_BANK2 | FLASH_FLAG_DBECCERR_BANK2); + if(errorflag != 0U) + { + pData->Area = FLASH_ECC_AREA_USER_BANK2; + pData->Address = ((((FLASH->ECC_FA2 & FLASH_ECC_FA_FAIL_ECC_ADDR))* FLASH_NB_32BITWORD_IN_FLASHWORD * 4) + FLASH_BANK2_BASE); + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Handle Flash ECC Detection interrupt request. + * @retval None + */ +void HAL_FLASHEx_BusFault_IRQHandler(void) +{ + /* Check if the ECC double error occured*/ + if ((FLASH->SR1 & FLASH_FLAG_DBECCERR_BANK1) != 0) + { + /* FLASH ECC detection user callback */ + HAL_FLASHEx_EccDetectionCallback(); + + /* Clear Bank 1 ECC double detection error flag + note : this step will clear all the informations related to the flash ECC detection + */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_DBECCERR_BANK1); + } +#if defined (DUAL_BANK) + /* Check if the ECC double error occured*/ + if ((FLASH->SR2 & FLASH_FLAG_DBECCERR_BANK2) != 0) + { + /* FLASH ECC detection user callback */ + HAL_FLASHEx_EccDetectionCallback(); + + /* Clear Bank 2 ECC double detection error flag + note : this step will clear all the informations related to the flash ECC detection + */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_DBECCERR_BANK2); + } +#endif /* DUAL_BANK */ +} + +/** + * @brief FLASH ECC Correction interrupt callback. + * @retval None + */ +__weak void HAL_FLASHEx_EccCorrectionCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASHEx_EccCorrectionCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH ECC Detection interrupt callback. + * @retval None + */ +__weak void HAL_FLASHEx_EccDetectionCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASHEx_EccDetectionCallback could be implemented in the user file + */ +} + +/** + * @} + */ +#endif /* USE_FLASH_ECC */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Mass erase of FLASH memory + * @param VoltageRange The device program/erase parallelism. + * This parameter can be one of the following values: + * @arg FLASH_VOLTAGE_RANGE_1 : Flash program/erase by 8 bits + * @arg FLASH_VOLTAGE_RANGE_2 : Flash program/erase by 16 bits + * @arg FLASH_VOLTAGE_RANGE_3 : Flash program/erase by 32 bits + * @arg FLASH_VOLTAGE_RANGE_4 : Flash program/erase by 64 bits + * + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased + * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased + * + * @retval HAL Status + */ +static void FLASH_MassErase(uint32_t VoltageRange, uint32_t Banks) +{ + /* Check the parameters */ +#if defined (FLASH_CR_PSIZE) + assert_param(IS_VOLTAGERANGE(VoltageRange)); +#else + UNUSED(VoltageRange); +#endif /* FLASH_CR_PSIZE */ + assert_param(IS_FLASH_BANK(Banks)); + +#if defined (DUAL_BANK) + /* Flash Mass Erase */ + if((Banks & FLASH_BANK_BOTH) == FLASH_BANK_BOTH) + { +#if defined (FLASH_CR_PSIZE) + /* Reset Program/erase VoltageRange for Bank1 and Bank2 */ + FLASH->CR1 &= (~FLASH_CR_PSIZE); + FLASH->CR2 &= (~FLASH_CR_PSIZE); + + /* Set voltage range */ + FLASH->CR1 |= VoltageRange; + FLASH->CR2 |= VoltageRange; +#endif /* FLASH_CR_PSIZE */ + + /* Set Mass Erase Bit */ + FLASH->OPTCR |= FLASH_OPTCR_MER; + } + else +#endif /* DUAL_BANK */ + { + /* Proceed to erase Flash Bank */ + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { +#if defined (FLASH_CR_PSIZE) + /* Set Program/erase VoltageRange for Bank1 */ + FLASH->CR1 &= (~FLASH_CR_PSIZE); + FLASH->CR1 |= VoltageRange; +#endif /* FLASH_CR_PSIZE */ + + /* Erase Bank1 */ + FLASH->CR1 |= (FLASH_CR_BER | FLASH_CR_START); + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { +#if defined (FLASH_CR_PSIZE) + /* Set Program/erase VoltageRange for Bank2 */ + FLASH->CR2 &= (~FLASH_CR_PSIZE); + FLASH->CR2 |= VoltageRange; +#endif /* FLASH_CR_PSIZE */ + + /* Erase Bank2 */ + FLASH->CR2 |= (FLASH_CR_BER | FLASH_CR_START); + } +#endif /* DUAL_BANK */ + } +} + +/** + * @brief Erase the specified FLASH memory sector + * @param Sector FLASH sector to erase + * This parameter can be a value of @ref FLASH_Sectors + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased + * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased + * @param VoltageRange The device program/erase parallelism. + * This parameter can be one of the following values: + * @arg FLASH_VOLTAGE_RANGE_1 : Flash program/erase by 8 bits + * @arg FLASH_VOLTAGE_RANGE_2 : Flash program/erase by 16 bits + * @arg FLASH_VOLTAGE_RANGE_3 : Flash program/erase by 32 bits + * @arg FLASH_VOLTAGE_RANGE_4 : Flash program/erase by 64 bits + * + * @retval None + */ +void FLASH_Erase_Sector(uint32_t Sector, uint32_t Banks, uint32_t VoltageRange) +{ + assert_param(IS_FLASH_SECTOR(Sector)); + assert_param(IS_FLASH_BANK_EXCLUSIVE(Banks)); +#if defined (FLASH_CR_PSIZE) + assert_param(IS_VOLTAGERANGE(VoltageRange)); +#else + UNUSED(VoltageRange); +#endif /* FLASH_CR_PSIZE */ + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { +#if defined (FLASH_CR_PSIZE) + /* Reset Program/erase VoltageRange and Sector Number for Bank1 */ + FLASH->CR1 &= ~(FLASH_CR_PSIZE | FLASH_CR_SNB); + + FLASH->CR1 |= (FLASH_CR_SER | VoltageRange | (Sector << FLASH_CR_SNB_Pos) | FLASH_CR_START); +#else + /* Reset Sector Number for Bank1 */ + FLASH->CR1 &= ~(FLASH_CR_SNB); + + FLASH->CR1 |= (FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos) | FLASH_CR_START); +#endif /* FLASH_CR_PSIZE */ + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { +#if defined (FLASH_CR_PSIZE) + /* Reset Program/erase VoltageRange and Sector Number for Bank2 */ + FLASH->CR2 &= ~(FLASH_CR_PSIZE | FLASH_CR_SNB); + + FLASH->CR2 |= (FLASH_CR_SER | VoltageRange | (Sector << FLASH_CR_SNB_Pos) | FLASH_CR_START); +#else + /* Reset Sector Number for Bank2 */ + FLASH->CR2 &= ~(FLASH_CR_SNB); + + FLASH->CR2 |= (FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos) | FLASH_CR_START); +#endif /* FLASH_CR_PSIZE */ + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Enable the write protection of the desired bank1 or bank 2 sectors + * @param WRPSector specifies the sector(s) to be write protected. + * This parameter can be one of the following values: + * @arg WRPSector: A combination of OB_WRP_SECTOR_0 to OB_WRP_SECTOR_7 or OB_WRP_SECTOR_ALL + * + * @param Banks the specific bank to apply WRP sectors + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: enable WRP on specified bank1 sectors + * @arg FLASH_BANK_2: enable WRP on specified bank2 sectors + * @arg FLASH_BANK_BOTH: enable WRP on both bank1 and bank2 specified sectors + * + * @retval HAL FLASH State + */ +static void FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_OB_WRP_SECTOR(WRPSector)); + assert_param(IS_FLASH_BANK(Banks)); + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Enable Write Protection for bank 1 */ + FLASH->WPSN_PRG1 &= (~(WRPSector & FLASH_WPSN_WRPSN)); + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Enable Write Protection for bank 2 */ + FLASH->WPSN_PRG2 &= (~(WRPSector & FLASH_WPSN_WRPSN)); + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Disable the write protection of the desired bank1 or bank 2 sectors + * @param WRPSector specifies the sector(s) to disable write protection. + * This parameter can be one of the following values: + * @arg WRPSector: A combination of FLASH_OB_WRP_SECTOR_0 to FLASH_OB_WRP_SECTOR_7 or FLASH_OB_WRP_SECTOR_ALL + * + * @param Banks the specific bank to apply WRP sectors + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: disable WRP on specified bank1 sectors + * @arg FLASH_BANK_2: disable WRP on specified bank2 sectors + * @arg FLASH_BANK_BOTH: disable WRP on both bank1 and bank2 specified sectors + * + * @retval HAL FLASH State + */ +static void FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_OB_WRP_SECTOR(WRPSector)); + assert_param(IS_FLASH_BANK(Banks)); + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Disable Write Protection for bank 1 */ + FLASH->WPSN_PRG1 |= (WRPSector & FLASH_WPSN_WRPSN); + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Disable Write Protection for bank 2 */ + FLASH->WPSN_PRG2 |= (WRPSector & FLASH_WPSN_WRPSN); + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Get the write protection of the given bank 1 or bank 2 sectors + * @param WRPState gives the write protection state on the given bank. + * This parameter can be one of the following values: + * @arg WRPState: OB_WRPSTATE_DISABLE or OB_WRPSTATE_ENABLE + + * @param WRPSector gives the write protected sector(s) on the given bank . + * This parameter can be one of the following values: + * @arg WRPSector: A combination of FLASH_OB_WRP_SECTOR_0 to FLASH_OB_WRP_SECTOR_7 or FLASH_OB_WRP_SECTOR_ALL + * + * @param Bank the specific bank to apply WRP sectors + * This parameter can be exclusively one of the following values: + * @arg FLASH_BANK_1: Get bank1 WRP sectors + * @arg FLASH_BANK_2: Get bank2 WRP sectors + * @arg FLASH_BANK_BOTH: note allowed in this functions + * + * @retval HAL FLASH State + */ +static void FLASH_OB_GetWRP(uint32_t *WRPState, uint32_t *WRPSector, uint32_t Bank) +{ + uint32_t regvalue = 0U; + + if(Bank == FLASH_BANK_1) + { + regvalue = FLASH->WPSN_CUR1; + } + +#if defined (DUAL_BANK) + if(Bank == FLASH_BANK_2) + { + regvalue = FLASH->WPSN_CUR2; + } +#endif /* DUAL_BANK */ + + (*WRPSector) = (~regvalue) & FLASH_WPSN_WRPSN; + + if(*WRPSector == 0U) + { + (*WRPState) = OB_WRPSTATE_DISABLE; + } + else + { + (*WRPState) = OB_WRPSTATE_ENABLE; + } +} + +/** + * @brief Set the read protection level. + * + * @note To configure the RDP level, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the RDP level, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * @note !!! Warning : When enabling OB_RDP level 2 it's no more possible + * to go back to level 1 or 0 !!! + * + * @param RDPLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + * + * @retval HAL status + */ +static void FLASH_OB_RDPConfig(uint32_t RDPLevel) +{ + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(RDPLevel)); + + /* Configure the RDP level in the option bytes register */ + MODIFY_REG(FLASH->OPTSR_PRG, FLASH_OPTSR_RDP, RDPLevel); +} + +/** + * @brief Get the read protection level. + * @retval RDPLevel specifies the read protection level. + * This return value can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t rdp_level = READ_BIT(FLASH->OPTSR_CUR, FLASH_OPTSR_RDP); + + if ((rdp_level != OB_RDP_LEVEL_0) && (rdp_level != OB_RDP_LEVEL_2)) + { + return (OB_RDP_LEVEL_1); + } + else + { + return rdp_level; + } +} + +#if defined(DUAL_CORE) +/** + * @brief Program the FLASH User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @note To validate the user option bytes, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param UserType The FLASH User Option Bytes to be modified : + * a combination of @ref FLASHEx_OB_USER_Type + * + * @param UserConfig The FLASH User Option Bytes values: + * IWDG1_SW(Bit4), IWDG2_SW(Bit 5), nRST_STOP_D1(Bit 6), nRST_STDY_D1(Bit 7), + * FZ_IWDG_STOP(Bit 17), FZ_IWDG_SDBY(Bit 18), ST_RAM_SIZE(Bit[19:20]), + * SECURITY(Bit 21), BCM4(Bit 22), BCM7(Bit 23), nRST_STOP_D2(Bit 24), + * nRST_STDY_D2(Bit 25), IO_HSLV (Bit 29) and SWAP_BANK_OPT(Bit 31). + * + * @retval HAL status + */ +#else +/** + * @brief Program the FLASH User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @note To validate the user option bytes, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param UserType The FLASH User Option Bytes to be modified : + * a combination of @arg FLASHEx_OB_USER_Type + * + * @param UserConfig The FLASH User Option Bytes values: + * IWDG_SW(Bit4), nRST_STOP_D1(Bit 6), nRST_STDY_D1(Bit 7), + * FZ_IWDG_STOP(Bit 17), FZ_IWDG_SDBY(Bit 18), ST_RAM_SIZE(Bit[19:20]), + * SECURITY(Bit 21), IO_HSLV (Bit 29) and SWAP_BANK_OPT(Bit 31). + * + * @retval HAL status + */ +#endif /*DUAL_CORE*/ +static void FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig) +{ + uint32_t optr_reg_val = 0; + uint32_t optr_reg_mask = 0; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + + if((UserType & OB_USER_IWDG1_SW) != 0U) + { + /* IWDG_HW option byte should be modified */ + assert_param(IS_OB_IWDG1_SOURCE(UserConfig & FLASH_OPTSR_IWDG1_SW)); + + /* Set value and mask for IWDG_HW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_IWDG1_SW); + optr_reg_mask |= FLASH_OPTSR_IWDG1_SW; + } +#if defined(DUAL_CORE) + if((UserType & OB_USER_IWDG2_SW) != 0U) + { + /* IWDG2_SW option byte should be modified */ + assert_param(IS_OB_IWDG2_SOURCE(UserConfig & FLASH_OPTSR_IWDG2_SW)); + + /* Set value and mask for IWDG2_SW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_IWDG2_SW); + optr_reg_mask |= FLASH_OPTSR_IWDG2_SW; + } +#endif /*DUAL_CORE*/ + if((UserType & OB_USER_NRST_STOP_D1) != 0U) + { + /* NRST_STOP option byte should be modified */ + assert_param(IS_OB_STOP_D1_RESET(UserConfig & FLASH_OPTSR_NRST_STOP_D1)); + + /* Set value and mask for NRST_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_NRST_STOP_D1); + optr_reg_mask |= FLASH_OPTSR_NRST_STOP_D1; + } + + if((UserType & OB_USER_NRST_STDBY_D1) != 0U) + { + /* NRST_STDBY option byte should be modified */ + assert_param(IS_OB_STDBY_D1_RESET(UserConfig & FLASH_OPTSR_NRST_STBY_D1)); + + /* Set value and mask for NRST_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_NRST_STBY_D1); + optr_reg_mask |= FLASH_OPTSR_NRST_STBY_D1; + } + + if((UserType & OB_USER_IWDG_STOP) != 0U) + { + /* IWDG_STOP option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STOP(UserConfig & FLASH_OPTSR_FZ_IWDG_STOP)); + + /* Set value and mask for IWDG_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_FZ_IWDG_STOP); + optr_reg_mask |= FLASH_OPTSR_FZ_IWDG_STOP; + } + + if((UserType & OB_USER_IWDG_STDBY) != 0U) + { + /* IWDG_STDBY option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STDBY(UserConfig & FLASH_OPTSR_FZ_IWDG_SDBY)); + + /* Set value and mask for IWDG_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_FZ_IWDG_SDBY); + optr_reg_mask |= FLASH_OPTSR_FZ_IWDG_SDBY; + } + + if((UserType & OB_USER_ST_RAM_SIZE) != 0U) + { + /* ST_RAM_SIZE option byte should be modified */ + assert_param(IS_OB_USER_ST_RAM_SIZE(UserConfig & FLASH_OPTSR_ST_RAM_SIZE)); + + /* Set value and mask for ST_RAM_SIZE option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_ST_RAM_SIZE); + optr_reg_mask |= FLASH_OPTSR_ST_RAM_SIZE; + } + + if((UserType & OB_USER_SECURITY) != 0U) + { + /* SECURITY option byte should be modified */ + assert_param(IS_OB_USER_SECURITY(UserConfig & FLASH_OPTSR_SECURITY)); + + /* Set value and mask for SECURITY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_SECURITY); + optr_reg_mask |= FLASH_OPTSR_SECURITY; + } + +#if defined(DUAL_CORE) + if((UserType & OB_USER_BCM4) != 0U) + { + /* BCM4 option byte should be modified */ + assert_param(IS_OB_USER_BCM4(UserConfig & FLASH_OPTSR_BCM4)); + + /* Set value and mask for BCM4 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_BCM4); + optr_reg_mask |= FLASH_OPTSR_BCM4; + } + + if((UserType & OB_USER_BCM7) != 0U) + { + /* BCM7 option byte should be modified */ + assert_param(IS_OB_USER_BCM7(UserConfig & FLASH_OPTSR_BCM7)); + + /* Set value and mask for BCM7 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_BCM7); + optr_reg_mask |= FLASH_OPTSR_BCM7; + } +#endif /* DUAL_CORE */ + +#if defined (FLASH_OPTSR_NRST_STOP_D2) + if((UserType & OB_USER_NRST_STOP_D2) != 0U) + { + /* NRST_STOP option byte should be modified */ + assert_param(IS_OB_STOP_D2_RESET(UserConfig & FLASH_OPTSR_NRST_STOP_D2)); + + /* Set value and mask for NRST_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_NRST_STOP_D2); + optr_reg_mask |= FLASH_OPTSR_NRST_STOP_D2; + } + + if((UserType & OB_USER_NRST_STDBY_D2) != 0U) + { + /* NRST_STDBY option byte should be modified */ + assert_param(IS_OB_STDBY_D2_RESET(UserConfig & FLASH_OPTSR_NRST_STBY_D2)); + + /* Set value and mask for NRST_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_NRST_STBY_D2); + optr_reg_mask |= FLASH_OPTSR_NRST_STBY_D2; + } +#endif /* FLASH_OPTSR_NRST_STOP_D2 */ + +#if defined (DUAL_BANK) + if((UserType & OB_USER_SWAP_BANK) != 0U) + { + /* SWAP_BANK_OPT option byte should be modified */ + assert_param(IS_OB_USER_SWAP_BANK(UserConfig & FLASH_OPTSR_SWAP_BANK_OPT)); + + /* Set value and mask for SWAP_BANK_OPT option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_SWAP_BANK_OPT); + optr_reg_mask |= FLASH_OPTSR_SWAP_BANK_OPT; + } +#endif /* DUAL_BANK */ + + if((UserType & OB_USER_IOHSLV) != 0U) + { + /* IOHSLV_OPT option byte should be modified */ + assert_param(IS_OB_USER_IOHSLV(UserConfig & FLASH_OPTSR_IO_HSLV)); + + /* Set value and mask for IOHSLV_OPT option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_IO_HSLV); + optr_reg_mask |= FLASH_OPTSR_IO_HSLV; + } + +#if defined (FLASH_OPTSR_VDDMMC_HSLV) + if((UserType & OB_USER_VDDMMC_HSLV) != 0U) + { + /* VDDMMC_HSLV option byte should be modified */ + assert_param(IS_OB_USER_VDDMMC_HSLV(UserConfig & FLASH_OPTSR_VDDMMC_HSLV)); + + /* Set value and mask for VDDMMC_HSLV option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_VDDMMC_HSLV); + optr_reg_mask |= FLASH_OPTSR_VDDMMC_HSLV; + } +#endif /* FLASH_OPTSR_VDDMMC_HSLV */ + + /* Configure the option bytes register */ + MODIFY_REG(FLASH->OPTSR_PRG, optr_reg_mask, optr_reg_val); +} + +#if defined(DUAL_CORE) +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values + * IWDG1_SW(Bit4), IWDG2_SW(Bit 5), nRST_STOP_D1(Bit 6), nRST_STDY_D1(Bit 7), + * FZ_IWDG_STOP(Bit 17), FZ_IWDG_SDBY(Bit 18), ST_RAM_SIZE(Bit[19:20]), + * SECURITY(Bit 21), BCM4(Bit 22), BCM7(Bit 23), nRST_STOP_D2(Bit 24), + * nRST_STDY_D2(Bit 25), IO_HSLV (Bit 29) and SWAP_BANK_OPT(Bit 31). + */ +#else +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values + * IWDG_SW(Bit4), nRST_STOP_D1(Bit 6), nRST_STDY_D1(Bit 7), + * FZ_IWDG_STOP(Bit 17), FZ_IWDG_SDBY(Bit 18), ST_RAM_SIZE(Bit[19:20]), + * SECURITY(Bit 21), IO_HSLV (Bit 29) and SWAP_BANK_OPT(Bit 31). + */ +#endif /*DUAL_CORE*/ +static uint32_t FLASH_OB_GetUser(void) +{ + uint32_t userConfig = READ_REG(FLASH->OPTSR_CUR); + userConfig &= (~(FLASH_OPTSR_BOR_LEV | FLASH_OPTSR_RDP)); + + return userConfig; +} + +/** + * @brief Configure the Proprietary code readout protection of the desired addresses + * + * @note To configure the PCROP options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the PCROP options, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param PCROPConfig specifies if the PCROP area for the given Bank shall be erased or not + * when RDP level decreased from Level 1 to Level 0, or after a bank erase with protection removal + * This parameter must be a value of @arg FLASHEx_OB_PCROP_RDP enumeration + * + * @param PCROPStartAddr specifies the start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the bank + * + * @param PCROPEndAddr specifies the end address of the Proprietary code readout protection + * This parameter can be an address between PCROPStartAddr and end of the bank + * + * @param Banks the specific bank to apply PCROP protection + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: PCROP on specified bank1 area + * @arg FLASH_BANK_2: PCROP on specified bank2 area + * @arg FLASH_BANK_BOTH: PCROP on specified bank1 and bank2 area (same config will be applied on both banks) + * + * @retval None + */ +static void FLASH_OB_PCROPConfig(uint32_t PCROPConfig, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + assert_param(IS_OB_PCROP_RDP(PCROPConfig)); + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(PCROPStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(PCROPEndAddr)); + + /* Configure the Proprietary code readout protection */ + FLASH->PRAR_PRG1 = ((PCROPStartAddr - FLASH_BANK1_BASE) >> 8) | \ + (((PCROPEndAddr - FLASH_BANK1_BASE) >> 8) << FLASH_PRAR_PROT_AREA_END_Pos) | \ + PCROPConfig; + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(PCROPStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(PCROPEndAddr)); + + /* Configure the Proprietary code readout protection */ + FLASH->PRAR_PRG2 = ((PCROPStartAddr - FLASH_BANK2_BASE) >> 8) | \ + (((PCROPEndAddr - FLASH_BANK2_BASE) >> 8) << FLASH_PRAR_PROT_AREA_END_Pos) | \ + PCROPConfig; + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Get the Proprietary code readout protection configuration on a given Bank + * + * @param PCROPConfig indicates if the PCROP area for the given Bank shall be erased or not + * when RDP level decreased from Level 1 to Level 0 or after a bank erase with protection removal + * + * @param PCROPStartAddr gives the start address of the Proprietary code readout protection of the bank + * + * @param PCROPEndAddr gives the end address of the Proprietary code readout protection of the bank + * + * @param Bank the specific bank to apply PCROP protection + * This parameter can be exclusively one of the following values: + * @arg FLASH_BANK_1: PCROP on specified bank1 area + * @arg FLASH_BANK_2: PCROP on specified bank2 area + * @arg FLASH_BANK_BOTH: is not allowed here + * + * @retval None + */ +static void FLASH_OB_GetPCROP(uint32_t *PCROPConfig, uint32_t *PCROPStartAddr, uint32_t *PCROPEndAddr, uint32_t Bank) +{ + uint32_t regvalue = 0; + uint32_t bankBase = 0; + + if(Bank == FLASH_BANK_1) + { + regvalue = FLASH->PRAR_CUR1; + bankBase = FLASH_BANK1_BASE; + } + +#if defined (DUAL_BANK) + if(Bank == FLASH_BANK_2) + { + regvalue = FLASH->PRAR_CUR2; + bankBase = FLASH_BANK2_BASE; + } +#endif /* DUAL_BANK */ + + (*PCROPConfig) = (regvalue & FLASH_PRAR_DMEP); + + (*PCROPStartAddr) = ((regvalue & FLASH_PRAR_PROT_AREA_START) << 8) + bankBase; + (*PCROPEndAddr) = (regvalue & FLASH_PRAR_PROT_AREA_END) >> FLASH_PRAR_PROT_AREA_END_Pos; + (*PCROPEndAddr) = ((*PCROPEndAddr) << 8) + bankBase; +} + +/** + * @brief Set the BOR Level. + * @param Level specifies the Option Bytes BOR Reset Level. + * This parameter can be one of the following values: + * @arg OB_BOR_LEVEL0: Reset level threshold is set to 1.6V + * @arg OB_BOR_LEVEL1: Reset level threshold is set to 2.1V + * @arg OB_BOR_LEVEL2: Reset level threshold is set to 2.4V + * @arg OB_BOR_LEVEL3: Reset level threshold is set to 2.7V + * @retval None + */ +static void FLASH_OB_BOR_LevelConfig(uint32_t Level) +{ + assert_param(IS_OB_BOR_LEVEL(Level)); + + /* Configure BOR_LEV option byte */ + MODIFY_REG(FLASH->OPTSR_PRG, FLASH_OPTSR_BOR_LEV, Level); +} + +/** + * @brief Get the BOR Level. + * @retval The Option Bytes BOR Reset Level. + * This parameter can be one of the following values: + * @arg OB_BOR_LEVEL0: Reset level threshold is set to 1.6V + * @arg OB_BOR_LEVEL1: Reset level threshold is set to 2.1V + * @arg OB_BOR_LEVEL2: Reset level threshold is set to 2.4V + * @arg OB_BOR_LEVEL3: Reset level threshold is set to 2.7V + */ +static uint32_t FLASH_OB_GetBOR(void) +{ + return (FLASH->OPTSR_CUR & FLASH_OPTSR_BOR_LEV); +} + +/** + * @brief Set Boot address + * @param BootOption Boot address option byte to be programmed, + * This parameter must be a value of @ref FLASHEx_OB_BOOT_OPTION + (OB_BOOT_ADD0, OB_BOOT_ADD1 or OB_BOOT_ADD_BOTH) + * + * @param BootAddress0 Specifies the Boot Address 0 + * @param BootAddress1 Specifies the Boot Address 1 + * @retval HAL Status + */ +static void FLASH_OB_BootAddConfig(uint32_t BootOption, uint32_t BootAddress0, uint32_t BootAddress1) +{ + /* Check the parameters */ + assert_param(IS_OB_BOOT_ADD_OPTION(BootOption)); + + if((BootOption & OB_BOOT_ADD0) == OB_BOOT_ADD0) + { + /* Check the parameters */ + assert_param(IS_BOOT_ADDRESS(BootAddress0)); + + /* Configure CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + MODIFY_REG(FLASH->BOOT7_PRG, FLASH_BOOT7_BCM7_ADD0, (BootAddress0 >> 16)); +#else /* Single Core*/ + MODIFY_REG(FLASH->BOOT_PRG, FLASH_BOOT_ADD0, (BootAddress0 >> 16)); +#endif /* DUAL_CORE */ + } + + if((BootOption & OB_BOOT_ADD1) == OB_BOOT_ADD1) + { + /* Check the parameters */ + assert_param(IS_BOOT_ADDRESS(BootAddress1)); + + /* Configure CM7 BOOT ADD1 */ +#if defined(DUAL_CORE) + MODIFY_REG(FLASH->BOOT7_PRG, FLASH_BOOT7_BCM7_ADD1, BootAddress1); +#else /* Single Core*/ + MODIFY_REG(FLASH->BOOT_PRG, FLASH_BOOT_ADD1, BootAddress1); +#endif /* DUAL_CORE */ + } +} + +/** + * @brief Get Boot address + * @param BootAddress0 Specifies the Boot Address 0. + * @param BootAddress1 Specifies the Boot Address 1. + * @retval HAL Status + */ +static void FLASH_OB_GetBootAdd(uint32_t *BootAddress0, uint32_t *BootAddress1) +{ + uint32_t regvalue; + +#if defined(DUAL_CORE) + regvalue = FLASH->BOOT7_CUR; + + (*BootAddress0) = (regvalue & FLASH_BOOT7_BCM7_ADD0) << 16; + (*BootAddress1) = (regvalue & FLASH_BOOT7_BCM7_ADD1); +#else /* Single Core */ + regvalue = FLASH->BOOT_CUR; + + (*BootAddress0) = (regvalue & FLASH_BOOT_ADD0) << 16; + (*BootAddress1) = (regvalue & FLASH_BOOT_ADD1); +#endif /* DUAL_CORE */ +} + +#if defined(DUAL_CORE) +/** + * @brief Set CM4 Boot address + * @param BootOption Boot address option byte to be programmed, + * This parameter must be a value of @ref FLASHEx_OB_BOOT_OPTION + (OB_BOOT_ADD0, OB_BOOT_ADD1 or OB_BOOT_ADD_BOTH) + * + * @param BootAddress0 Specifies the CM4 Boot Address 0. + * @param BootAddress1 Specifies the CM4 Boot Address 1. + * @retval HAL Status + */ +static void FLASH_OB_CM4BootAddConfig(uint32_t BootOption, uint32_t BootAddress0, uint32_t BootAddress1) +{ + /* Check the parameters */ + assert_param(IS_OB_BOOT_ADD_OPTION(BootOption)); + + if((BootOption & OB_BOOT_ADD0) == OB_BOOT_ADD0) + { + /* Check the parameters */ + assert_param(IS_BOOT_ADDRESS(BootAddress0)); + + /* Configure CM4 BOOT ADD0 */ + MODIFY_REG(FLASH->BOOT4_PRG, FLASH_BOOT4_BCM4_ADD0, (BootAddress0 >> 16)); + + } + + if((BootOption & OB_BOOT_ADD1) == OB_BOOT_ADD1) + { + /* Check the parameters */ + assert_param(IS_BOOT_ADDRESS(BootAddress1)); + + /* Configure CM4 BOOT ADD1 */ + MODIFY_REG(FLASH->BOOT4_PRG, FLASH_BOOT4_BCM4_ADD1, BootAddress1); + } +} + +/** + * @brief Get CM4 Boot address + * @param BootAddress0 Specifies the CM4 Boot Address 0. + * @param BootAddress1 Specifies the CM4 Boot Address 1. + * @retval HAL Status + */ +static void FLASH_OB_GetCM4BootAdd(uint32_t *BootAddress0, uint32_t *BootAddress1) +{ + uint32_t regvalue; + + regvalue = FLASH->BOOT4_CUR; + + (*BootAddress0) = (regvalue & FLASH_BOOT4_BCM4_ADD0) << 16; + (*BootAddress1) = (regvalue & FLASH_BOOT4_BCM4_ADD1); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Set secure area configuration + * @param SecureAreaConfig specify if the secure area will be deleted or not + * when RDP level decreased from Level 1 to Level 0 or during a mass erase. + * + * @param SecureAreaStartAddr Specifies the secure area start address + * @param SecureAreaEndAddr Specifies the secure area end address + * @param Banks the specific bank to apply Security protection + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Secure area on specified bank1 area + * @arg FLASH_BANK_2: Secure area on specified bank2 area + * @arg FLASH_BANK_BOTH: Secure area on specified bank1 and bank2 area (same config will be applied on both banks) + * @retval None + */ +static void FLASH_OB_SecureAreaConfig(uint32_t SecureAreaConfig, uint32_t SecureAreaStartAddr, uint32_t SecureAreaEndAddr, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + assert_param(IS_OB_SECURE_RDP(SecureAreaConfig)); + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(SecureAreaStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(SecureAreaEndAddr)); + + /* Configure the secure area */ + FLASH->SCAR_PRG1 = ((SecureAreaStartAddr - FLASH_BANK1_BASE) >> 8) | \ + (((SecureAreaEndAddr - FLASH_BANK1_BASE) >> 8) << FLASH_SCAR_SEC_AREA_END_Pos) | \ + (SecureAreaConfig & FLASH_SCAR_DMES); + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(SecureAreaStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(SecureAreaEndAddr)); + + /* Configure the secure area */ + FLASH->SCAR_PRG2 = ((SecureAreaStartAddr - FLASH_BANK2_BASE) >> 8) | \ + (((SecureAreaEndAddr - FLASH_BANK2_BASE) >> 8) << FLASH_SCAR_SEC_AREA_END_Pos) | \ + (SecureAreaConfig & FLASH_SCAR_DMES); + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Get secure area configuration + * @param SecureAreaConfig indicates if the secure area will be deleted or not + * when RDP level decreased from Level 1 to Level 0 or during a mass erase. + * @param SecureAreaStartAddr gives the secure area start address + * @param SecureAreaEndAddr gives the secure area end address + * @param Bank Specifies the Bank + * @retval None + */ +static void FLASH_OB_GetSecureArea(uint32_t *SecureAreaConfig, uint32_t *SecureAreaStartAddr, uint32_t *SecureAreaEndAddr, uint32_t Bank) +{ + uint32_t regvalue = 0; + uint32_t bankBase = 0; + + /* Check Bank parameter value */ + if(Bank == FLASH_BANK_1) + { + regvalue = FLASH->SCAR_CUR1; + bankBase = FLASH_BANK1_BASE; + } + +#if defined (DUAL_BANK) + if(Bank == FLASH_BANK_2) + { + regvalue = FLASH->SCAR_CUR2; + bankBase = FLASH_BANK2_BASE; + } +#endif /* DUAL_BANK */ + + /* Get the secure area settings */ + (*SecureAreaConfig) = (regvalue & FLASH_SCAR_DMES); + (*SecureAreaStartAddr) = ((regvalue & FLASH_SCAR_SEC_AREA_START) << 8) + bankBase; + (*SecureAreaEndAddr) = (regvalue & FLASH_SCAR_SEC_AREA_END) >> FLASH_SCAR_SEC_AREA_END_Pos; + (*SecureAreaEndAddr) = ((*SecureAreaEndAddr) << 8) + bankBase; +} + +/** + * @brief Add a CRC sector to the list of sectors on which the CRC will be calculated + * @param Sector Specifies the CRC sector number + * @param Bank Specifies the Bank + * @retval None + */ +static void FLASH_CRC_AddSector(uint32_t Sector, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FLASH_SECTOR(Sector)); + + if (Bank == FLASH_BANK_1) + { + /* Clear CRC sector */ + FLASH->CRCCR1 &= (~FLASH_CRCCR_CRC_SECT); + + /* Select CRC Sector and activate ADD_SECT bit */ + FLASH->CRCCR1 |= Sector | FLASH_CRCCR_ADD_SECT; + } +#if defined (DUAL_BANK) + else + { + /* Clear CRC sector */ + FLASH->CRCCR2 &= (~FLASH_CRCCR_CRC_SECT); + + /* Select CRC Sector and activate ADD_SECT bit */ + FLASH->CRCCR2 |= Sector | FLASH_CRCCR_ADD_SECT; + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Select CRC start and end memory addresses on which the CRC will be calculated + * @param CRCStartAddr Specifies the CRC start address + * @param CRCEndAddr Specifies the CRC end address + * @param Bank Specifies the Bank + * @retval None + */ +static void FLASH_CRC_SelectAddress(uint32_t CRCStartAddr, uint32_t CRCEndAddr, uint32_t Bank) +{ + if (Bank == FLASH_BANK_1) + { + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(CRCStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(CRCEndAddr)); + + /* Write CRC Start and End addresses */ + FLASH->CRCSADD1 = CRCStartAddr; + FLASH->CRCEADD1 = CRCEndAddr; + } +#if defined (DUAL_BANK) + else + { + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(CRCStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(CRCEndAddr)); + + /* Write CRC Start and End addresses */ + FLASH->CRCSADD2 = CRCStartAddr; + FLASH->CRCEADD2 = CRCEndAddr; + } +#endif /* DUAL_BANK */ +} +/** + * @} + */ + +#if defined (FLASH_OTPBL_LOCKBL) +/** + * @brief Configure the OTP Block Lock. + * @param OTP_Block specifies the OTP Block to lock. + * This parameter can be a value of @ref FLASHEx_OTP_Blocks + * @retval None + */ +static void FLASH_OB_OTP_LockConfig(uint32_t OTP_Block) +{ + /* Check the parameters */ + assert_param(IS_OTP_BLOCK(OTP_Block)); + + /* Configure the OTP Block lock in the option bytes register */ + FLASH->OTPBL_PRG |= (OTP_Block & FLASH_OTPBL_LOCKBL); +} + +/** + * @brief Get the OTP Block Lock. + * @retval OTP_Block specifies the OTP Block to lock. + * This return value can be a value of @ref FLASHEx_OTP_Blocks + */ +static uint32_t FLASH_OB_OTP_GetLock(void) +{ + return (FLASH->OTPBL_CUR); +} +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +/** + * @brief Configure the TCM / AXI Shared RAM. + * @param SharedRamConfig specifies the Shared RAM configuration. + * This parameter can be a value of @ref FLASHEx_OB_TCM_AXI_SHARED + * @retval None + */ +static void FLASH_OB_SharedRAM_Config(uint32_t SharedRamConfig) +{ + /* Check the parameters */ + assert_param(IS_OB_USER_TCM_AXI_SHARED(SharedRamConfig)); + + /* Configure the TCM / AXI Shared RAM in the option bytes register */ + MODIFY_REG(FLASH->OPTSR2_PRG, FLASH_OPTSR2_TCM_AXI_SHARED, SharedRamConfig); +} + +/** + * @brief Get the TCM / AXI Shared RAM configuration. + * @retval SharedRamConfig returns the TCM / AXI Shared RAM configuration. + * This return value can be a value of @ref FLASHEx_OB_TCM_AXI_SHARED + */ +static uint32_t FLASH_OB_SharedRAM_GetConfig(void) +{ + return (FLASH->OPTSR2_CUR & FLASH_OPTSR2_TCM_AXI_SHARED); +} +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +/** + * @brief Configure the CPU Frequency Boost. + * @param FreqBoost specifies the CPU Frequency Boost state. + * This parameter can be a value of @ref FLASHEx_OB_CPUFREQ_BOOST + * @retval None + */ +static void FLASH_OB_CPUFreq_BoostConfig(uint32_t FreqBoost) +{ + /* Check the parameters */ + assert_param(IS_OB_USER_CPUFREQ_BOOST(FreqBoost)); + + /* Configure the CPU Frequency Boost in the option bytes register */ + MODIFY_REG(FLASH->OPTSR2_PRG, FLASH_OPTSR2_CPUFREQ_BOOST, FreqBoost); +} + +/** + * @brief Get the CPU Frequency Boost state. + * @retval FreqBoost returns the CPU Frequency Boost state. + * This return value can be a value of @ref FLASHEx_OB_CPUFREQ_BOOST + */ +static uint32_t FLASH_OB_CPUFreq_GetBoost(void) +{ + return (FLASH->OPTSR2_CUR & FLASH_OPTSR2_CPUFREQ_BOOST); +} +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c new file mode 100644 index 0000000..3580f78 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c @@ -0,0 +1,555 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + The external interrupt/event controller consists of up to 23 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PH0 and PH1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ + +#if defined(DUAL_CORE) +#define EXTI_CPU1 (0x01000000U) +#define EXTI_CPU2 (0x02000000U) +#endif /*DUAL_CORE*/ +#define GPIO_NUMBER (16U) +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize and de-initialize the GPIOs + to be ready for use. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00U; + uint32_t iocurrent; + uint32_t temp; + EXTI_Core_TypeDef *EXTI_CurrentCPU; + +#if defined(DUAL_CORE) && defined(CORE_CM4) + EXTI_CurrentCPU = EXTI_D2; /* EXTI for CM4 CPU */ +#else + EXTI_CurrentCPU = EXTI_D1; /* EXTI for CM7 CPU */ +#endif + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00U) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1UL << position); + + if (iocurrent != 0x00U) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2U)); + temp |= (GPIO_Init->Speed << (position * 2U)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + GPIOx->OTYPER = temp; + } + + if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + /* Check the Pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + temp |= ((GPIO_Init->Pull) << (position * 2U)); + GPIOx->PUPDR = temp; + } + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3U]; + temp &= ~(0xFU << ((position & 0x07U) * 4U)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07U) * 4U)); + GPIOx->AFR[position >> 3U] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2U)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) != 0x00U) + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + temp = SYSCFG->EXTICR[position >> 2U]; + temp &= ~(0x0FUL << (4U * (position & 0x03U))); + temp |= (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U))); + SYSCFG->EXTICR[position >> 2U] = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U) + { + temp |= iocurrent; + } + EXTI->RTSR1 = temp; + + temp = EXTI->FTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U) + { + temp |= iocurrent; + } + EXTI->FTSR1 = temp; + + temp = EXTI_CurrentCPU->EMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_EVT) != 0x00U) + { + temp |= iocurrent; + } + EXTI_CurrentCPU->EMR1 = temp; + + /* Clear EXTI line configuration */ + temp = EXTI_CurrentCPU->IMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_IT) != 0x00U) + { + temp |= iocurrent; + } + EXTI_CurrentCPU->IMR1 = temp; + } + } + + position++; + } +} + +/** + * @brief De-initializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00U; + uint32_t iocurrent; + uint32_t tmp; + EXTI_Core_TypeDef *EXTI_CurrentCPU; + +#if defined(DUAL_CORE) && defined(CORE_CM4) + EXTI_CurrentCPU = EXTI_D2; /* EXTI for CM4 CPU */ +#else + EXTI_CurrentCPU = EXTI_D1; /* EXTI for CM7 CPU */ +#endif + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00U) + { + /* Get current io position */ + iocurrent = GPIO_Pin & (1UL << position) ; + + if (iocurrent != 0x00U) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + tmp = SYSCFG->EXTICR[position >> 2U]; + tmp &= (0x0FUL << (4U * (position & 0x03U))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U)))) + { + /* Clear EXTI line configuration for Current CPU */ + EXTI_CurrentCPU->IMR1 &= ~(iocurrent); + EXTI_CurrentCPU->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->FTSR1 &= ~(iocurrent); + EXTI->RTSR1 &= ~(iocurrent); + + tmp = 0x0FUL << (4U * (position & 0x03U)); + SYSCFG->EXTICR[position >> 2U] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2U)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3U] &= ~(0xFU << ((position & 0x07U) * 4U)) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2U)); + } + + position++; + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00U) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Sets or clears the selected data port bit. + * + * @note This function uses GPIOx_BSRR register to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState: specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER; + } +} + +/** + * @brief Toggles the specified GPIO pins. + * @param GPIOx: Where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Pin: Specifies the pins to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32H7 family + * @param GPIO_Pin: specifies the port bit to be locked. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence*/ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00U) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ +#if defined(DUAL_CORE) && defined(CORE_CM4) + if (__HAL_GPIO_EXTID2_GET_IT(GPIO_Pin) != 0x00U) + { + __HAL_GPIO_EXTID2_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +#else + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00U) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +#endif +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c new file mode 100644 index 0000000..1d17bac --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c @@ -0,0 +1,447 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_hsem.c + * @author MCD Application Team + * @brief HSEM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the semaphore peripheral: + * + Semaphore Take function (2-Step Procedure) , non blocking + * + Semaphore FastTake function (1-Step Procedure) , non blocking + * + Semaphore Status check + * + Semaphore Clear Key Set and Get + * + Release and release all functions + * + Semaphore notification enabling and disabling and callnack functions + * + IRQ handler management + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#)Take a semaphore In 2-Step mode Using function HAL_HSEM_Take. This function takes as parameters : + (++) the semaphore ID from 0 to 31 + (++) the process ID from 0 to 255 + (#) Fast Take semaphore In 1-Step mode Using function HAL_HSEM_FastTake. This function takes as parameter : + (++) the semaphore ID from 0_ID to 31. Note that the process ID value is implicitly assumed as zero + (#) Check if a semaphore is Taken using function HAL_HSEM_IsSemTaken. This function takes as parameter : + (++) the semaphore ID from 0_ID to 31 + (++) It returns 1 if the given semaphore is taken otherwise (Free) zero + (#)Release a semaphore using function with HAL_HSEM_Release. This function takes as parameters : + (++) the semaphore ID from 0 to 31 + (++) the process ID from 0 to 255: + (++) Note: If ProcessID and MasterID match, semaphore is freed, and an interrupt + may be generated when enabled (notification activated). If ProcessID or MasterID does not match, + semaphore remains taken (locked) + + (#)Release all semaphores at once taken by a given Master using function HAL_HSEM_Release_All + This function takes as parameters : + (++) the Release Key (value from 0 to 0xFFFF) can be Set or Get respectively by + HAL_HSEM_SetClearKey() or HAL_HSEM_GetClearKey functions + (++) the Master ID: + (++) Note: If the Key and MasterID match, all semaphores taken by the given CPU that corresponds + to MasterID will be freed, and an interrupt may be generated when enabled (notification activated). If the + Key or the MasterID doesn't match, semaphores remains taken (locked) + + (#)Semaphores Release all key functions: + (++) HAL_HSEM_SetClearKey() to set semaphore release all Key + (++) HAL_HSEM_GetClearKey() to get release all Key + (#)Semaphores notification functions : + (++) HAL_HSEM_ActivateNotification to activate a notification callback on + a given semaphores Mask (bitfield). When one or more semaphores defined by the mask are released + the callback HAL_HSEM_FreeCallback will be asserted giving as parameters a mask of the released + semaphores (bitfield). + + (++) HAL_HSEM_DeactivateNotification to deactivate the notification of a given semaphores Mask (bitfield). + (++) See the description of the macro __HAL_HSEM_SEMID_TO_MASK to check how to calculate a semaphore mask + Used by the notification functions + *** HSEM HAL driver macros list *** + ============================================= + [..] Below the list of most used macros in HSEM HAL driver. + + (+) __HAL_HSEM_SEMID_TO_MASK: Helper macro to convert a Semaphore ID to a Mask. + [..] Example of use : + [..] mask = __HAL_HSEM_SEMID_TO_MASK(8) | __HAL_HSEM_SEMID_TO_MASK(21) | __HAL_HSEM_SEMID_TO_MASK(25). + [..] All next macros take as parameter a semaphore Mask (bitfiled) that can be constructed using __HAL_HSEM_SEMID_TO_MASK as the above example. + (+) __HAL_HSEM_ENABLE_IT: Enable the specified semaphores Mask interrupts. + (+) __HAL_HSEM_DISABLE_IT: Disable the specified semaphores Mask interrupts. + (+) __HAL_HSEM_GET_IT: Checks whether the specified semaphore interrupt has occurred or not. + (+) __HAL_HSEM_GET_FLAG: Get the semaphores status release flags. + (+) __HAL_HSEM_CLEAR_FLAG: Clear the semaphores status release flags. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup HSEM HSEM + * @brief HSEM HAL module driver + * @{ + */ + +#ifdef HAL_HSEM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(DUAL_CORE) +/** @defgroup HSEM_Private_Constants HSEM Private Constants + * @{ + */ + +#ifndef HSEM_R_MASTERID +#define HSEM_R_MASTERID HSEM_R_COREID +#endif + +#ifndef HSEM_RLR_MASTERID +#define HSEM_RLR_MASTERID HSEM_RLR_COREID +#endif + +#ifndef HSEM_CR_MASTERID +#define HSEM_CR_MASTERID HSEM_CR_COREID +#endif + +/** + * @} + */ +#endif /* DUAL_CORE */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HSEM_Exported_Functions HSEM Exported Functions + * @{ + */ + +/** @defgroup HSEM_Exported_Functions_Group1 Take and Release functions + * @brief HSEM Take and Release functions + * +@verbatim + ============================================================================== + ##### HSEM Take and Release functions ##### + ============================================================================== +[..] This section provides functions allowing to: + (+) Take a semaphore with 2 Step method + (+) Fast Take a semaphore with 1 Step method + (+) Check semaphore state Taken or not + (+) Release a semaphore + (+) Release all semaphore at once + +@endverbatim + * @{ + */ + + +/** + * @brief Take a semaphore in 2 Step mode. + * @param SemID: semaphore ID from 0 to 31 + * @param ProcessID: Process ID from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID) +{ + /* Check the parameters */ + assert_param(IS_HSEM_SEMID(SemID)); + assert_param(IS_HSEM_PROCESSID(ProcessID)); + +#if USE_MULTI_CORE_SHARED_CODE != 0U + /* First step write R register with MasterID, processID and take bit=1*/ + HSEM->R[SemID] = ((ProcessID & HSEM_R_PROCID) | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID) | HSEM_R_LOCK); + + /* second step : read the R register . Take achieved if MasterID and processID match and take bit set to 1 */ + if (HSEM->R[SemID] == ((ProcessID & HSEM_R_PROCID) | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID) | HSEM_R_LOCK)) + { + /*take success when MasterID and ProcessID match and take bit set*/ + return HAL_OK; + } +#else + /* First step write R register with MasterID, processID and take bit=1*/ + HSEM->R[SemID] = (ProcessID | HSEM_CR_COREID_CURRENT | HSEM_R_LOCK); + + /* second step : read the R register . Take achieved if MasterID and processID match and take bit set to 1 */ + if (HSEM->R[SemID] == (ProcessID | HSEM_CR_COREID_CURRENT | HSEM_R_LOCK)) + { + /*take success when MasterID and ProcessID match and take bit set*/ + return HAL_OK; + } +#endif + + /* Semaphore take fails*/ + return HAL_ERROR; +} + +/** + * @brief Fast Take a semaphore with 1 Step mode. + * @param SemID: semaphore ID from 0 to 31 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HSEM_FastTake(uint32_t SemID) +{ + /* Check the parameters */ + assert_param(IS_HSEM_SEMID(SemID)); + +#if USE_MULTI_CORE_SHARED_CODE != 0U + /* Read the RLR register to take the semaphore */ + if (HSEM->RLR[SemID] == (((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_RLR_MASTERID) | HSEM_RLR_LOCK)) + { + /*take success when MasterID match and take bit set*/ + return HAL_OK; + } +#else + /* Read the RLR register to take the semaphore */ + if (HSEM->RLR[SemID] == (HSEM_CR_COREID_CURRENT | HSEM_RLR_LOCK)) + { + /*take success when MasterID match and take bit set*/ + return HAL_OK; + } +#endif + + /* Semaphore take fails */ + return HAL_ERROR; +} +/** + * @brief Check semaphore state Taken or not. + * @param SemID: semaphore ID + * @retval HAL HSEM state + */ +uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID) +{ + return (((HSEM->R[SemID] & HSEM_R_LOCK) != 0U) ? 1UL : 0UL); +} + + +/** + * @brief Release a semaphore. + * @param SemID: semaphore ID from 0 to 31 + * @param ProcessID: Process ID from 0 to 255 + * @retval None + */ +void HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID) +{ + /* Check the parameters */ + assert_param(IS_HSEM_SEMID(SemID)); + assert_param(IS_HSEM_PROCESSID(ProcessID)); + + /* Clear the semaphore by writing to the R register : the MasterID , the processID and take bit = 0 */ +#if USE_MULTI_CORE_SHARED_CODE != 0U + HSEM->R[SemID] = (ProcessID | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID)); +#else + HSEM->R[SemID] = (ProcessID | HSEM_CR_COREID_CURRENT); +#endif + +} + +/** + * @brief Release All semaphore used by a given Master . + * @param Key: Semaphore Key , value from 0 to 0xFFFF + * @param CoreID: CoreID of the CPU that is using semaphores to be released + * @retval None + */ +void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID) +{ + assert_param(IS_HSEM_KEY(Key)); + assert_param(IS_HSEM_COREID(CoreID)); + + HSEM->CR = ((Key << HSEM_CR_KEY_Pos) | (CoreID << HSEM_CR_COREID_Pos)); +} + +/** + * @} + */ + +/** @defgroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions + * @brief HSEM Set and Get Key functions. + * +@verbatim + ============================================================================== + ##### HSEM Set and Get Key functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Set semaphore Key + (+) Get semaphore Key +@endverbatim + + * @{ + */ + +/** + * @brief Set semaphore Key . + * @param Key: Semaphore Key , value from 0 to 0xFFFF + * @retval None + */ +void HAL_HSEM_SetClearKey(uint32_t Key) +{ + assert_param(IS_HSEM_KEY(Key)); + + MODIFY_REG(HSEM->KEYR, HSEM_KEYR_KEY, (Key << HSEM_KEYR_KEY_Pos)); + +} + +/** + * @brief Get semaphore Key . + * @retval Semaphore Key , value from 0 to 0xFFFF + */ +uint32_t HAL_HSEM_GetClearKey(void) +{ + return (HSEM->KEYR >> HSEM_KEYR_KEY_Pos); +} + +/** + * @} + */ + +/** @defgroup HSEM_Exported_Functions_Group3 HSEM IRQ handler management + * @brief HSEM Notification functions. + * +@verbatim + ============================================================================== + ##### HSEM IRQ handler management and Notification functions ##### + ============================================================================== +[..] This section provides HSEM IRQ handler and Notification function. + +@endverbatim + * @{ + */ + +/** + * @brief Activate Semaphore release Notification for a given Semaphores Mask . + * @param SemMask: Mask of Released semaphores + * @retval Semaphore Key + */ +void HAL_HSEM_ActivateNotification(uint32_t SemMask) +{ +#if USE_MULTI_CORE_SHARED_CODE != 0U + /*enable the semaphore mask interrupts */ + if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID) + { + /*Use interrupt line 0 for CPU1 Master */ + HSEM->C1IER |= SemMask; + } + else /* HSEM_CPU2_COREID */ + { + /*Use interrupt line 1 for CPU2 Master*/ + HSEM->C2IER |= SemMask; + } +#else + HSEM_COMMON->IER |= SemMask; +#endif +} + +/** + * @brief Deactivate Semaphore release Notification for a given Semaphores Mask . + * @param SemMask: Mask of Released semaphores + * @retval Semaphore Key + */ +void HAL_HSEM_DeactivateNotification(uint32_t SemMask) +{ +#if USE_MULTI_CORE_SHARED_CODE != 0U + /*enable the semaphore mask interrupts */ + if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID) + { + /*Use interrupt line 0 for CPU1 Master */ + HSEM->C1IER &= ~SemMask; + } + else /* HSEM_CPU2_COREID */ + { + /*Use interrupt line 1 for CPU2 Master*/ + HSEM->C2IER &= ~SemMask; + } +#else + HSEM_COMMON->IER &= ~SemMask; +#endif +} + +/** + * @brief This function handles HSEM interrupt request + * @retval None + */ +void HAL_HSEM_IRQHandler(void) +{ + uint32_t statusreg; +#if USE_MULTI_CORE_SHARED_CODE != 0U + if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID) + { + /* Get the list of masked freed semaphores*/ + statusreg = HSEM->C1MISR; /*Use interrupt line 0 for CPU1 Master*/ + + /*Disable Interrupts*/ + HSEM->C1IER &= ~((uint32_t)statusreg); + + /*Clear Flags*/ + HSEM->C1ICR = ((uint32_t)statusreg); + } + else /* HSEM_CPU2_COREID */ + { + /* Get the list of masked freed semaphores*/ + statusreg = HSEM->C2MISR;/*Use interrupt line 1 for CPU2 Master*/ + + /*Disable Interrupts*/ + HSEM->C2IER &= ~((uint32_t)statusreg); + + /*Clear Flags*/ + HSEM->C2ICR = ((uint32_t)statusreg); + } +#else + /* Get the list of masked freed semaphores*/ + statusreg = HSEM_COMMON->MISR; + + /*Disable Interrupts*/ + HSEM_COMMON->IER &= ~((uint32_t)statusreg); + + /*Clear Flags*/ + HSEM_COMMON->ICR = ((uint32_t)statusreg); + +#endif + /* Call FreeCallback */ + HAL_HSEM_FreeCallback(statusreg); +} + +/** + * @brief Semaphore Released Callback. + * @param SemMask: Mask of Released semaphores + * @retval None + */ +__weak void HAL_HSEM_FreeCallback(uint32_t SemMask) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(SemMask); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HSEM_FreeCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_HSEM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c new file mode 100644 index 0000000..39b2d68 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c @@ -0,0 +1,7499 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit or receive stream or channel depends on Instance + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx stream or channel depends on Instance + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx stream or channel depends on Instance + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in + no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with + start condition, address and data to transfer without a final stop condition, + an then permit a call the same master sequential interface several times + (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition + after several call of the same master sequential interface several times + (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or + Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after + each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between + each bytes using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic + generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() + HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction request by master + (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SLAVE_ADDR_SHIFT 7U +#define SLAVE_ADDR_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ + (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ + (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) +/*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) +/*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT + and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error + and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Macro + * @{ + */ +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + else + { + /* Clear the I2C ADD10 bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @note The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @note The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t tmpXferCount; + HAL_StatusTypeDef error; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until AF flag is set */ + error = I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart); + + if (error != HAL_OK) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + + tmpXferCount = hi2c->XferCount; + if ((hi2c->ErrorCode == HAL_I2C_ERROR_AF) && (tmpXferCount == 0U)) + { + /* Reset ErrorCode to NONE */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + } + else + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), + xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferCount != 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, + (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->XferSize = 0U; + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, + (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + if (hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) == RESET) && \ + ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))) + { + /* Write data to TXDR */ + if (hi2c->XferCount != 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + if (hi2c->Memaddress == 0xFFFFFFFFU) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->XferCount != 0U) + { + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error and NACK interrupt for data transfer */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + uint32_t tmpoptions = hi2c->XferOptions; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else if (tmpstate == HAL_I2C_STATE_LISTEN) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_NONE; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA stream or channel depends on Instance */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA stream or channel depends on Instance */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + uint32_t treatdmaerror = 0U; + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + if (hi2c->hdmatx != NULL) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmaerror = 1U; + } + } + + if (hi2c->hdmarx != NULL) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmaerror = 1U; + } + } + + /* Check if a FIFO error is detected, if true normal use case, so no specific action to perform */ + if (!((HAL_DMA_GetError(hdma) == HAL_DMA_ERROR_FE)) && (treatdmaerror != 0U)) + { + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } +} + + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + + +/** + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) && (status == HAL_OK)) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) && (status == HAL_OK)) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + status = HAL_OK; + } + + /* Check a no-acknowledge have been detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + } + + /* Check for the Timeout */ + if ((((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) && (status == HAL_OK)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + } + } + return status; +} + +/** + * @brief This function handles errors detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + + status = HAL_ERROR; + + break; + } + } + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= error_code; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return status; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR != I2C_Master_ISR_DMA) && \ + (hi2c->XferISR != I2C_Slave_ISR_DMA) && \ + (hi2c->XferISR != I2C_Mem_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c new file mode 100644 index 0000000..d9b8e46 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c @@ -0,0 +1,372 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Filter Mode Functions + * + WakeUp Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32H7xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @brief Filter Mode Functions + * +@verbatim + =============================================================================== + ##### Filter Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @note For all I2C4 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C4 parameter. + * @note For all I2C5 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C5 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->PMCR, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @note For all I2C4 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C4 parameter. + * @note For all I2C5 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C5 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->PMCR, (uint32_t)ConfigFastModePlus); +} +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc.c new file mode 100644 index 0000000..80fe3ad --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc.c @@ -0,0 +1,2221 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_ltdc.c + * @author MCD Application Team + * @brief LTDC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the LTDC peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LTDC HAL driver can be used as follows: + + (#) Declare a LTDC_HandleTypeDef handle structure, for example: LTDC_HandleTypeDef hltdc; + + (#) Initialize the LTDC low level resources by implementing the HAL_LTDC_MspInit() API: + (##) Enable the LTDC interface clock + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the LTDC interrupt priority + (+++) Enable the NVIC LTDC IRQ Channel + + (#) Initialize the required configuration through the following parameters: + the LTDC timing, the horizontal and vertical polarity, the pixel clock polarity, + Data Enable polarity and the LTDC background color value using HAL_LTDC_Init() function + + *** Configuration *** + ========================= + [..] + (#) Program the required configuration through the following parameters: + the pixel format, the blending factors, input alpha value, the window size + and the image size using HAL_LTDC_ConfigLayer() function for foreground + or/and background layer. + + (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and + HAL_LTDC_EnableCLUT functions. + + (#) Optionally, enable the Dither using HAL_LTDC_EnableDither(). + + (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying() + and HAL_LTDC_EnableColorKeying functions. + + (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineEvent() + function + + (#) If needed, reconfigure and change the pixel format value, the alpha value + value, the window size, the window position and the layer start address + for foreground or/and background layer using respectively the following + functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(), + HAL_LTDC_SetWindowPosition() and HAL_LTDC_SetAddress(). + + (#) Variant functions with _NoReload suffix allows to set the LTDC configuration/settings without immediate reload. + This is useful in case when the program requires to modify serval LTDC settings (on one or both layers) + then applying(reload) these settings in one shot by calling the function HAL_LTDC_Reload(). + + After calling the _NoReload functions to set different color/format/layer settings, + the program shall call the function HAL_LTDC_Reload() to apply(reload) these settings. + Function HAL_LTDC_Reload() can be called with the parameter ReloadType set to LTDC_RELOAD_IMMEDIATE if + an immediate reload is required. + Function HAL_LTDC_Reload() can be called with the parameter ReloadType set to LTDC_RELOAD_VERTICAL_BLANKING if + the reload should be done in the next vertical blanking period, + this option allows to avoid display flicker by applying the new settings during the vertical blanking period. + + + (#) To control LTDC state you can use the following function: HAL_LTDC_GetState() + + *** LTDC HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in LTDC HAL driver. + + (+) __HAL_LTDC_ENABLE: Enable the LTDC. + (+) __HAL_LTDC_DISABLE: Disable the LTDC. + (+) __HAL_LTDC_LAYER_ENABLE: Enable an LTDC Layer. + (+) __HAL_LTDC_LAYER_DISABLE: Disable an LTDC Layer. + (+) __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG: Reload Layer Configuration. + (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags. + (+) __HAL_LTDC_CLEAR_FLAG: Clear the LTDC pending flags. + (+) __HAL_LTDC_ENABLE_IT: Enable the specified LTDC interrupts. + (+) __HAL_LTDC_DISABLE_IT: Disable the specified LTDC interrupts. + (+) __HAL_LTDC_GET_IT_SOURCE: Check whether the specified LTDC interrupt has occurred or not. + + [..] + (@) You can refer to the LTDC HAL driver header file for more useful macros + + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_LTDC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use function HAL_LTDC_RegisterCallback() to register a callback. + + [..] + Function HAL_LTDC_RegisterCallback() allows to register following callbacks: + (+) LineEventCallback : LTDC Line Event Callback. + (+) ReloadEventCallback : LTDC Reload Event Callback. + (+) ErrorCallback : LTDC Error Callback + (+) MspInitCallback : LTDC MspInit. + (+) MspDeInitCallback : LTDC MspDeInit. + [..] + This function takes as parameters the HAL peripheral handle, the callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_LTDC_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_LTDC_UnRegisterCallback() takes as parameters the HAL peripheral handle + and the callback ID. + [..] + This function allows to reset following callbacks: + (+) LineEventCallback : LTDC Line Event Callback + (+) ReloadEventCallback : LTDC Reload Event Callback + (+) ErrorCallback : LTDC Error Callback + (+) MspInitCallback : LTDC MspInit + (+) MspDeInitCallback : LTDC MspDeInit. + + [..] + By default, after the HAL_LTDC_Init and when the state is HAL_LTDC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_LTDC_LineEventCallback(), HAL_LTDC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak (surcharged) functions in the HAL_LTDC_Init() and HAL_LTDC_DeInit() + only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_LTDC_Init() and HAL_LTDC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_LTDC_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_LTDC_STATE_READY or HAL_LTDC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_LTDC_RegisterCallback() before calling HAL_LTDC_DeInit() + or HAL_LTDC_Init() function. + + [..] + When the compilation define USE_HAL_LTDC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +#ifdef HAL_LTDC_MODULE_ENABLED + +#if defined (LTDC) + +/** @defgroup LTDC LTDC + * @brief LTDC HAL module driver + * @{ + */ + + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup LTDC_Private_Define LTDC Private Define + * @{ + */ +#define LTDC_TIMEOUT_VALUE ((uint32_t)100U) /* 100ms */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx); +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup LTDC_Exported_Functions LTDC Exported Functions + * @{ + */ + +/** @defgroup LTDC_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the LTDC + (+) De-initialize the LTDC + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the LTDC according to the specified parameters in the LTDC_InitTypeDef. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc) +{ + uint32_t tmp; + uint32_t tmp1; + + /* Check the LTDC peripheral state */ + if (hltdc == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance)); + assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync)); + assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync)); + assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP)); + assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP)); + assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH)); + assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW)); + assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh)); + assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth)); + assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity)); + assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity)); + assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity)); + assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity)); + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + if (hltdc->State == HAL_LTDC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hltdc->Lock = HAL_UNLOCKED; + + /* Reset the LTDC callback to the legacy weak callbacks */ + hltdc->LineEventCallback = HAL_LTDC_LineEventCallback; /* Legacy weak LineEventCallback */ + hltdc->ReloadEventCallback = HAL_LTDC_ReloadEventCallback; /* Legacy weak ReloadEventCallback */ + hltdc->ErrorCallback = HAL_LTDC_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hltdc->MspInitCallback == NULL) + { + hltdc->MspInitCallback = HAL_LTDC_MspInit; + } + /* Init the low level hardware */ + hltdc->MspInitCallback(hltdc); + } +#else + if (hltdc->State == HAL_LTDC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hltdc->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_LTDC_MspInit(hltdc); + } +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Configure the HS, VS, DE and PC polarity */ + hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL); + hltdc->Instance->GCR |= (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \ + hltdc->Init.DEPolarity | hltdc->Init.PCPolarity); + + /* Set Synchronization size */ + hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW); + tmp = (hltdc->Init.HorizontalSync << 16U); + hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync); + + /* Set Accumulated Back porch */ + hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP); + tmp = (hltdc->Init.AccumulatedHBP << 16U); + hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP); + + /* Set Accumulated Active Width */ + hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW); + tmp = (hltdc->Init.AccumulatedActiveW << 16U); + hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH); + + /* Set Total Width */ + hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW); + tmp = (hltdc->Init.TotalWidth << 16U); + hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh); + + /* Set the background color value */ + tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8U); + tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16U); + hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED); + hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue); + + /* Enable the Transfer Error and FIFO underrun interrupts */ + __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE | LTDC_IT_FU); + + /* Enable LTDC by setting LTDCEN bit */ + __HAL_LTDC_ENABLE(hltdc); + + /* Initialize the error code */ + hltdc->ErrorCode = HAL_LTDC_ERROR_NONE; + + /* Initialize the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-initialize the LTDC peripheral. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ + +HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc) +{ + uint32_t tickstart; + + /* Check the LTDC peripheral state */ + if (hltdc == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance)); + + /* Disable LTDC Layer 1 */ + __HAL_LTDC_LAYER_DISABLE(hltdc, LTDC_LAYER_1); + +#if defined(LTDC_Layer2_BASE) + /* Disable LTDC Layer 2 */ + __HAL_LTDC_LAYER_DISABLE(hltdc, LTDC_LAYER_2); +#endif /* LTDC_Layer2_BASE */ + + /* Reload during vertical blanking period */ + __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(hltdc); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait for VSYNC Interrupt */ + while (READ_BIT(hltdc->Instance->CDSR, LTDC_CDSR_VSYNCS) == 0U) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > LTDC_TIMEOUT_VALUE) + { + break; + } + } + + /* Disable LTDC */ + __HAL_LTDC_DISABLE(hltdc); + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + if (hltdc->MspDeInitCallback == NULL) + { + hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; + } + /* DeInit the low level hardware */ + hltdc->MspDeInitCallback(hltdc); +#else + /* DeInit the low level hardware */ + HAL_LTDC_MspDeInit(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + + /* Initialize the error code */ + hltdc->ErrorCode = HAL_LTDC_ERROR_NONE; + + /* Initialize the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Initialize the LTDC MSP. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-initialize the LTDC MSP. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User LTDC Callback + * To be used instead of the weak predefined callback + * @param hltdc ltdc handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_LTDC_LINE_EVENT_CB_ID Line Event Callback ID + * @arg @ref HAL_LTDC_RELOAD_EVENT_CB_ID Reload Event Callback ID + * @arg @ref HAL_LTDC_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_LTDC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_LTDC_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID, + pLTDC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hltdc); + + if (hltdc->State == HAL_LTDC_STATE_READY) + { + switch (CallbackID) + { + case HAL_LTDC_LINE_EVENT_CB_ID : + hltdc->LineEventCallback = pCallback; + break; + + case HAL_LTDC_RELOAD_EVENT_CB_ID : + hltdc->ReloadEventCallback = pCallback; + break; + + case HAL_LTDC_ERROR_CB_ID : + hltdc->ErrorCallback = pCallback; + break; + + case HAL_LTDC_MSPINIT_CB_ID : + hltdc->MspInitCallback = pCallback; + break; + + case HAL_LTDC_MSPDEINIT_CB_ID : + hltdc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hltdc->State == HAL_LTDC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_LTDC_MSPINIT_CB_ID : + hltdc->MspInitCallback = pCallback; + break; + + case HAL_LTDC_MSPDEINIT_CB_ID : + hltdc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hltdc); + + return status; +} + +/** + * @brief Unregister an LTDC Callback + * LTDC callback is redirected to the weak predefined callback + * @param hltdc ltdc handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_LTDC_LINE_EVENT_CB_ID Line Event Callback ID + * @arg @ref HAL_LTDC_RELOAD_EVENT_CB_ID Reload Event Callback ID + * @arg @ref HAL_LTDC_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_LTDC_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_LTDC_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hltdc); + + if (hltdc->State == HAL_LTDC_STATE_READY) + { + switch (CallbackID) + { + case HAL_LTDC_LINE_EVENT_CB_ID : + hltdc->LineEventCallback = HAL_LTDC_LineEventCallback; /* Legacy weak LineEventCallback */ + break; + + case HAL_LTDC_RELOAD_EVENT_CB_ID : + hltdc->ReloadEventCallback = HAL_LTDC_ReloadEventCallback; /* Legacy weak ReloadEventCallback */ + break; + + case HAL_LTDC_ERROR_CB_ID : + hltdc->ErrorCallback = HAL_LTDC_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_LTDC_MSPINIT_CB_ID : + hltdc->MspInitCallback = HAL_LTDC_MspInit; /* Legcay weak MspInit Callback */ + break; + + case HAL_LTDC_MSPDEINIT_CB_ID : + hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; /* Legcay weak MspDeInit Callback */ + break; + + default : + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hltdc->State == HAL_LTDC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_LTDC_MSPINIT_CB_ID : + hltdc->MspInitCallback = HAL_LTDC_MspInit; /* Legcay weak MspInit Callback */ + break; + + case HAL_LTDC_MSPDEINIT_CB_ID : + hltdc->MspDeInitCallback = HAL_LTDC_MspDeInit; /* Legcay weak MspDeInit Callback */ + break; + + default : + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hltdc); + + return status; +} +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup LTDC_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides function allowing to: + (+) Handle LTDC interrupt request + +@endverbatim + * @{ + */ +/** + * @brief Handle LTDC interrupt request. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL status + */ +void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc) +{ + uint32_t isrflags = READ_REG(hltdc->Instance->ISR); + uint32_t itsources = READ_REG(hltdc->Instance->IER); + + /* Transfer Error Interrupt management ***************************************/ + if (((isrflags & LTDC_ISR_TERRIF) != 0U) && ((itsources & LTDC_IER_TERRIE) != 0U)) + { + /* Disable the transfer Error interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE); + + /* Clear the transfer error flag */ + __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE); + + /* Update error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_TE; + + /* Change LTDC state */ + hltdc->State = HAL_LTDC_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + /* Transfer error Callback */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + hltdc->ErrorCallback(hltdc); +#else + /* Call legacy error callback*/ + HAL_LTDC_ErrorCallback(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + } + + /* FIFO underrun Interrupt management ***************************************/ + if (((isrflags & LTDC_ISR_FUIF) != 0U) && ((itsources & LTDC_IER_FUIE) != 0U)) + { + /* Disable the FIFO underrun interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU); + + /* Clear the FIFO underrun flag */ + __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU); + + /* Update error code */ + hltdc->ErrorCode |= HAL_LTDC_ERROR_FU; + + /* Change LTDC state */ + hltdc->State = HAL_LTDC_STATE_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + /* Transfer error Callback */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + hltdc->ErrorCallback(hltdc); +#else + /* Call legacy error callback*/ + HAL_LTDC_ErrorCallback(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + } + + /* Line Interrupt management ************************************************/ + if (((isrflags & LTDC_ISR_LIF) != 0U) && ((itsources & LTDC_IER_LIE) != 0U)) + { + /* Disable the Line interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI); + + /* Clear the Line interrupt flag */ + __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI); + + /* Change LTDC state */ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + /* Line interrupt Callback */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + /*Call registered Line Event callback */ + hltdc->LineEventCallback(hltdc); +#else + /*Call Legacy Line Event callback */ + HAL_LTDC_LineEventCallback(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + } + + /* Register reload Interrupt management ***************************************/ + if (((isrflags & LTDC_ISR_RRIF) != 0U) && ((itsources & LTDC_IER_RRIE) != 0U)) + { + /* Disable the register reload interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_RR); + + /* Clear the register reload flag */ + __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_RR); + + /* Change LTDC state */ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + /* Reload interrupt Callback */ +#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1) + /*Call registered reload Event callback */ + hltdc->ReloadEventCallback(hltdc); +#else + /*Call Legacy Reload Event callback */ + HAL_LTDC_ReloadEventCallback(hltdc); +#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Error LTDC callback. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Line Event callback. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_LineEventCallback could be implemented in the user file + */ +} + +/** + * @brief Reload Event callback. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval None + */ +__weak void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hltdc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_LTDC_ReloadEvenCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup LTDC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the LTDC foreground or/and background parameters. + (+) Set the active layer. + (+) Configure the color keying. + (+) Configure the C-LUT. + (+) Enable / Disable the color keying. + (+) Enable / Disable the C-LUT. + (+) Update the layer position. + (+) Update the layer size. + (+) Update pixel format on the fly. + (+) Update transparency on the fly. + (+) Update address on the fly. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the LTDC Layer according to the specified + * parameters in the LTDC_InitTypeDef and create the associated handle. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param pLayerCfg pointer to a LTDC_LayerCfgTypeDef structure that contains + * the configuration information for the Layer. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); + assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); + assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); + assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); + assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat)); + assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha)); + assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0)); + assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1)); + assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2)); + assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth)); + assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Copy new layer configuration into handle structure */ + hltdc->LayerCfg[LayerIdx] = *pLayerCfg; + + /* Configure the LTDC Layer */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Initialize the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Configure the color keying. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param RGBValue the color key value + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Configure the default color values */ + LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED); + LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Load the color lookup table. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param pCLUT pointer to the color lookup table address. + * @param CLUTSize the color lookup table size. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx) +{ + uint32_t tmp; + uint32_t counter; + uint32_t *pcolorlut = pCLUT; + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + for (counter = 0U; (counter < CLUTSize); counter++) + { + if (hltdc->LayerCfg[LayerIdx].PixelFormat == LTDC_PIXEL_FORMAT_AL44) + { + tmp = (((counter + (16U * counter)) << 24U) | ((uint32_t)(*pcolorlut) & 0xFFU) | \ + ((uint32_t)(*pcolorlut) & 0xFF00U) | ((uint32_t)(*pcolorlut) & 0xFF0000U)); + } + else + { + tmp = ((counter << 24U) | ((uint32_t)(*pcolorlut) & 0xFFU) | \ + ((uint32_t)(*pcolorlut) & 0xFF00U) | ((uint32_t)(*pcolorlut) & 0xFF0000U)); + } + + pcolorlut++; + + /* Specifies the C-LUT address and RGB value */ + LTDC_LAYER(hltdc, LayerIdx)->CLUTWR = tmp; + } + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable the color keying. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable LTDC color keying by setting COLKEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable the color keying. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color keying by setting COLKEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable the color lookup table. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable LTDC color lookup table by setting CLUTEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable the color lookup table. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color lookup table by setting CLUTEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN; + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable Dither. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc) +{ + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable Dither by setting DTEN bit */ + LTDC->GCR |= (uint32_t)LTDC_GCR_DEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable Dither. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc) +{ + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable Dither by setting DTEN bit */ + LTDC->GCR &= ~(uint32_t)LTDC_GCR_DEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Set the LTDC window size. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param XSize LTDC Pixel per line + * @param YSize LTDC Line number + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters (Layers parameters)*/ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_CFBLL(XSize)); + assert_param(IS_LTDC_CFBLNBR(YSize)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* update horizontal stop */ + pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0; + + /* update vertical stop */ + pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0; + + /* Reconfigures the color frame buffer pitch in byte */ + pLayerCfg->ImageWidth = XSize; + + /* Reconfigures the frame buffer line number */ + pLayerCfg->ImageHeight = YSize; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Set the LTDC window position. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param X0 LTDC window X offset + * @param Y0 LTDC window Y offset + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_CFBLL(X0)); + assert_param(IS_LTDC_CFBLNBR(Y0)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* update horizontal start/stop */ + pLayerCfg->WindowX0 = X0; + pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth; + + /* update vertical start/stop */ + pLayerCfg->WindowY0 = Y0; + pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the pixel format. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Pixelformat new pixel format value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat)); + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the pixel format */ + pLayerCfg->PixelFormat = Pixelformat; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the layer alpha value. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Alpha new alpha value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_ALPHA(Alpha)); + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the Alpha value */ + pLayerCfg->Alpha = Alpha; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} +/** + * @brief Reconfigure the frame buffer Address. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Address new address value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the Address */ + pLayerCfg->FBStartAdress = Address; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Set the Immediate Reload type */ + hltdc->Instance->SRCR = LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width + * that is larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to + * layer for which we want to read and display on screen only a portion 320x240 taken in the center + * of the buffer. + * The pitch in pixels will be in that case 800 pixels and not 320 pixels as initially configured by previous + * call to HAL_LTDC_ConfigLayer(). + * @note This function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default + * pitch configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above). + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LinePitchInPixels New line pitch in pixels to configure for LTDC layer 'LayerIdx'. + * @param LayerIdx LTDC layer index concerned by the modification of line pitch. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx) +{ + uint32_t tmp; + uint32_t pitchUpdate; + uint32_t pixelFormat; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* get LayerIdx used pixel format */ + pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat; + + if (pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) + { + tmp = 4U; + } + else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888) + { + tmp = 3U; + } + else if ((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_AL88)) + { + tmp = 2U; + } + else + { + tmp = 1U; + } + + pitchUpdate = ((LinePitchInPixels * tmp) << 16U); + + /* Clear previously set standard pitch */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP; + + /* Set the Reload type as immediate update of LTDC pitch configured above */ + LTDC->SRCR |= LTDC_SRCR_IMR; + + /* Set new line pitch value */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate; + + /* Set the Reload type as immediate update of LTDC pitch configured above */ + LTDC->SRCR |= LTDC_SRCR_IMR; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Define the position of the line interrupt. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Line Line Interrupt Position. + * @note User application may resort to HAL_LTDC_LineEventCallback() at line interrupt generation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LIPOS(Line)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable the Line interrupt */ + __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI); + + /* Set the Line Interrupt position */ + LTDC->LIPCR = (uint32_t)Line; + + /* Enable the Line interrupt */ + __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reload LTDC Layers configuration. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param ReloadType This parameter can be one of the following values : + * LTDC_RELOAD_IMMEDIATE : Immediate Reload + * LTDC_RELOAD_VERTICAL_BLANKING : Reload in the next Vertical Blanking + * @note User application may resort to HAL_LTDC_ReloadEventCallback() at reload interrupt generation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType) +{ + /* Check the parameters */ + assert_param(IS_LTDC_RELOAD(ReloadType)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable the Reload interrupt */ + __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_RR); + + /* Apply Reload type */ + hltdc->Instance->SRCR = ReloadType; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Configure the LTDC Layer according to the specified without reloading + * parameters in the LTDC_InitTypeDef and create the associated handle. + * Variant of the function HAL_LTDC_ConfigLayer without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param pLayerCfg pointer to a LTDC_LayerCfgTypeDef structure that contains + * the configuration information for the Layer. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, + uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0)); + assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1)); + assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0)); + assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1)); + assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat)); + assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha)); + assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0)); + assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1)); + assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2)); + assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth)); + assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Copy new layer configuration into handle structure */ + hltdc->LayerCfg[LayerIdx] = *pLayerCfg; + + /* Configure the LTDC Layer */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Initialize the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Set the LTDC window size without reloading. + * Variant of the function HAL_LTDC_SetWindowSize without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param XSize LTDC Pixel per line + * @param YSize LTDC Line number + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, + uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters (Layers parameters)*/ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_CFBLL(XSize)); + assert_param(IS_LTDC_CFBLNBR(YSize)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* update horizontal stop */ + pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0; + + /* update vertical stop */ + pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0; + + /* Reconfigures the color frame buffer pitch in byte */ + pLayerCfg->ImageWidth = XSize; + + /* Reconfigures the frame buffer line number */ + pLayerCfg->ImageHeight = YSize; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Set the LTDC window position without reloading. + * Variant of the function HAL_LTDC_SetWindowPosition without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param X0 LTDC window X offset + * @param Y0 LTDC window Y offset + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, + uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + assert_param(IS_LTDC_CFBLL(X0)); + assert_param(IS_LTDC_CFBLNBR(Y0)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* update horizontal start/stop */ + pLayerCfg->WindowX0 = X0; + pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth; + + /* update vertical start/stop */ + pLayerCfg->WindowY0 = Y0; + pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the pixel format without reloading. + * Variant of the function HAL_LTDC_SetPixelFormat without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDfef structure that contains + * the configuration information for the LTDC. + * @param Pixelformat new pixel format value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat)); + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the pixel format */ + pLayerCfg->PixelFormat = Pixelformat; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the layer alpha value without reloading. + * Variant of the function HAL_LTDC_SetAlpha without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Alpha new alpha value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_ALPHA(Alpha)); + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the Alpha value */ + pLayerCfg->Alpha = Alpha; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Reconfigure the frame buffer Address without reloading. + * Variant of the function HAL_LTDC_SetAddress without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param Address new address value. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx) +{ + LTDC_LayerCfgTypeDef *pLayerCfg; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Get layer configuration from handle structure */ + pLayerCfg = &hltdc->LayerCfg[LayerIdx]; + + /* Reconfigure the Address */ + pLayerCfg->FBStartAdress = Address; + + /* Set LTDC parameters */ + LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx); + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Function used to reconfigure the pitch for specific cases where the attached LayerIdx buffer have a width + * that is larger than the one intended to be displayed on screen. Example of a buffer 800x480 attached to + * layer for which we want to read and display on screen only a portion 320x240 taken in the center + * of the buffer. + * The pitch in pixels will be in that case 800 pixels and not 320 pixels as initially configured by + * previous call to HAL_LTDC_ConfigLayer(). + * @note This function should be called only after a previous call to HAL_LTDC_ConfigLayer() to modify the default + * pitch configured by HAL_LTDC_ConfigLayer() when required (refer to example described just above). + * Variant of the function HAL_LTDC_SetPitch without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LinePitchInPixels New line pitch in pixels to configure for LTDC layer 'LayerIdx'. + * @param LayerIdx LTDC layer index concerned by the modification of line pitch. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx) +{ + uint32_t tmp; + uint32_t pitchUpdate; + uint32_t pixelFormat; + + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* get LayerIdx used pixel format */ + pixelFormat = hltdc->LayerCfg[LayerIdx].PixelFormat; + + if (pixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) + { + tmp = 4U; + } + else if (pixelFormat == LTDC_PIXEL_FORMAT_RGB888) + { + tmp = 3U; + } + else if ((pixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ + (pixelFormat == LTDC_PIXEL_FORMAT_AL88)) + { + tmp = 2U; + } + else + { + tmp = 1U; + } + + pitchUpdate = ((LinePitchInPixels * tmp) << 16U); + + /* Clear previously set standard pitch */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~LTDC_LxCFBLR_CFBP; + + /* Set new line pitch value */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR |= pitchUpdate; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + + +/** + * @brief Configure the color keying without reloading. + * Variant of the function HAL_LTDC_ConfigColorKeying without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param RGBValue the color key value + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Configure the default color values */ + LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED); + LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable the color keying without reloading. + * Variant of the function HAL_LTDC_EnableColorKeying without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Enable LTDC color keying by setting COLKEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable the color keying without reloading. + * Variant of the function HAL_LTDC_DisableColorKeying without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color keying by setting COLKEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Enable the color lookup table without reloading. + * Variant of the function HAL_LTDC_EnableCLUT without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color lookup table by setting CLUTEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @brief Disable the color lookup table without reloading. + * Variant of the function HAL_LTDC_DisableCLUT without immediate reload. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: + * LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx) +{ + /* Check the parameters */ + assert_param(IS_LTDC_LAYER(LayerIdx)); + + /* Process locked */ + __HAL_LOCK(hltdc); + + /* Change LTDC peripheral state */ + hltdc->State = HAL_LTDC_STATE_BUSY; + + /* Disable LTDC color lookup table by setting CLUTEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN; + + /* Change the LTDC state*/ + hltdc->State = HAL_LTDC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hltdc); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup LTDC_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the LTDC handle state. + (+) Get the LTDC handle error code. + +@endverbatim + * @{ + */ + +/** + * @brief Return the LTDC handle state. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval HAL state + */ +HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc) +{ + return hltdc->State; +} + +/** + * @brief Return the LTDC handle error code. + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @retval LTDC Error Code + */ +uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc) +{ + return hltdc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup LTDC_Private_Functions LTDC Private Functions + * @{ + */ + +/** + * @brief Configure the LTDC peripheral + * @param hltdc Pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param pLayerCfg Pointer LTDC Layer Configuration structure + * @param LayerIdx LTDC Layer index. + * This parameter can be one of the following values: LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1) + * @retval None + */ +static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx) +{ + uint32_t tmp; + uint32_t tmp1; + uint32_t tmp2; + + /* Configure the horizontal start and stop position */ + tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U)) << 16U); + LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS); + LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + \ + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16U) + 1U) | tmp); + + /* Configure the vertical start and stop position */ + tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16U); + LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS); + LTDC_LAYER(hltdc, LayerIdx)->WVPCR = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1U) | tmp); + + /* Specifies the pixel format */ + LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF); + LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat); + + /* Configure the default color values */ + tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8U); + tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16U); + tmp2 = (pLayerCfg->Alpha0 << 24U); + LTDC_LAYER(hltdc, LayerIdx)->DCCR &= ~(LTDC_LxDCCR_DCBLUE | LTDC_LxDCCR_DCGREEN | LTDC_LxDCCR_DCRED | + LTDC_LxDCCR_DCALPHA); + LTDC_LAYER(hltdc, LayerIdx)->DCCR = (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2); + + /* Specifies the constant alpha value */ + LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA); + LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha); + + /* Specifies the blending factors */ + LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1); + LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2); + + /* Configure the color frame buffer start address */ + LTDC_LAYER(hltdc, LayerIdx)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD); + LTDC_LAYER(hltdc, LayerIdx)->CFBAR = (pLayerCfg->FBStartAdress); + + if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888) + { + tmp = 4U; + } + else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888) + { + tmp = 3U; + } + else if ((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \ + (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \ + (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \ + (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88)) + { + tmp = 2U; + } + else + { + tmp = 1U; + } + + /* Configure the color frame buffer pitch in byte */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP); + LTDC_LAYER(hltdc, LayerIdx)->CFBLR = (((pLayerCfg->ImageWidth * tmp) << 16U) | + (((pLayerCfg->WindowX1 - pLayerCfg->WindowX0) * tmp) + 7U)); + /* Configure the frame buffer line number */ + LTDC_LAYER(hltdc, LayerIdx)->CFBLNR &= ~(LTDC_LxCFBLNR_CFBLNBR); + LTDC_LAYER(hltdc, LayerIdx)->CFBLNR = (pLayerCfg->ImageHeight); + + /* Enable LTDC_Layer by setting LEN bit */ + LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN; +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* LTDC */ + +#endif /* HAL_LTDC_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc_ex.c new file mode 100644 index 0000000..2ffdb1d --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ltdc_ex.c @@ -0,0 +1,154 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_ltdc_ex.c + * @author MCD Application Team + * @brief LTDC Extension HAL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +#if defined(HAL_LTDC_MODULE_ENABLED) && defined(HAL_DSI_MODULE_ENABLED) + +#if defined (LTDC) && defined (DSI) + +/** @defgroup LTDCEx LTDCEx + * @brief LTDC HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup LTDCEx_Exported_Functions LTDC Extended Exported Functions + * @{ + */ + +/** @defgroup LTDCEx_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the LTDC + +@endverbatim + * @{ + */ + +/** + * @brief Retrieve common parameters from DSI Video mode configuration structure + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains + * the DSI video mode configuration parameters + * @note The implementation of this function is taking into account the LTDC + * polarities inversion as described in the current LTDC specification + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg) +{ + /* Retrieve signal polarities from DSI */ + + /* The following polarity is inverted: + LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH */ + +#if !defined(POLARITIES_INVERSION_UPDATED) + /* Note 1 : Code in line w/ Current LTDC specification */ + hltdc->Init.DEPolarity = (VidCfg->DEPolarity == \ + DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH; + hltdc->Init.VSPolarity = (VidCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AH : LTDC_VSPOLARITY_AL; + hltdc->Init.HSPolarity = (VidCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AH : LTDC_HSPOLARITY_AL; +#else + /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */ + hltdc->Init.DEPolarity = VidCfg->DEPolarity << 29; + hltdc->Init.VSPolarity = VidCfg->VSPolarity << 29; + hltdc->Init.HSPolarity = VidCfg->HSPolarity << 29; +#endif /* POLARITIES_INVERSION_UPDATED */ + + /* Retrieve vertical timing parameters from DSI */ + hltdc->Init.VerticalSync = VidCfg->VerticalSyncActive - 1U; + hltdc->Init.AccumulatedVBP = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch - 1U; + hltdc->Init.AccumulatedActiveH = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + \ + VidCfg->VerticalActive - 1U; + hltdc->Init.TotalHeigh = VidCfg->VerticalSyncActive + VidCfg->VerticalBackPorch + \ + VidCfg->VerticalActive + VidCfg->VerticalFrontPorch - 1U; + + return HAL_OK; +} + +/** + * @brief Retrieve common parameters from DSI Adapted command mode configuration structure + * @param hltdc pointer to a LTDC_HandleTypeDef structure that contains + * the configuration information for the LTDC. + * @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains + * the DSI command mode configuration parameters + * @note The implementation of this function is taking into account the LTDC + * polarities inversion as described in the current LTDC specification + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg) +{ + /* Retrieve signal polarities from DSI */ + + /* The following polarities are inverted: + LTDC_DEPOLARITY_AL <-> LTDC_DEPOLARITY_AH + LTDC_VSPOLARITY_AL <-> LTDC_VSPOLARITY_AH + LTDC_HSPOLARITY_AL <-> LTDC_HSPOLARITY_AH)*/ + +#if !defined(POLARITIES_INVERSION_UPDATED) + /* Note 1 : Code in line w/ Current LTDC specification */ + hltdc->Init.DEPolarity = (CmdCfg->DEPolarity == \ + DSI_DATA_ENABLE_ACTIVE_HIGH) ? LTDC_DEPOLARITY_AL : LTDC_DEPOLARITY_AH; + hltdc->Init.VSPolarity = (CmdCfg->VSPolarity == DSI_VSYNC_ACTIVE_HIGH) ? LTDC_VSPOLARITY_AL : LTDC_VSPOLARITY_AH; + hltdc->Init.HSPolarity = (CmdCfg->HSPolarity == DSI_HSYNC_ACTIVE_HIGH) ? LTDC_HSPOLARITY_AL : LTDC_HSPOLARITY_AH; +#else + /* Note 2: Code to be used in case LTDC polarities inversion updated in the specification */ + hltdc->Init.DEPolarity = CmdCfg->DEPolarity << 29; + hltdc->Init.VSPolarity = CmdCfg->VSPolarity << 29; + hltdc->Init.HSPolarity = CmdCfg->HSPolarity << 29; +#endif /* POLARITIES_INVERSION_UPDATED */ + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LTDC && DSI */ + +#endif /* HAL_LTCD_MODULE_ENABLED && HAL_DSI_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c new file mode 100644 index 0000000..089d9fb --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c @@ -0,0 +1,1899 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_mdma.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Master Direct Memory Access (MDMA) peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral State and errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the MDMA Channel + (except for internal SRAM/FLASH memories: no initialization is + necessary) please refer to Reference manual for connection between peripherals + and MDMA requests. + + (#) + For a given Channel use HAL_MDMA_Init function to program the required configuration through the following parameters: + transfer request , channel priority, data endianness, Source increment, destination increment , + source data size, destination data size, data alignment, source Burst, destination Burst , + buffer Transfer Length, Transfer Trigger Mode (buffer transfer, block transfer, repeated block transfer + or full transfer) source and destination block address offset, mask address and data. + + If using the MDMA in linked list mode then use function HAL_MDMA_LinkedList_CreateNode to fill a transfer node. + Note that parameters given to the function HAL_MDMA_Init corresponds always to the node zero. + Use function HAL_MDMA_LinkedList_AddNode to connect the created node to the linked list at a given position. + User can make a linked list circular using function HAL_MDMA_LinkedList_EnableCircularMode , this function will automatically connect the + last node of the list to the first one in order to make the list circular. + In this case the linked list will loop on node 1 : first node connected after the initial transfer defined by the HAL_MDMA_Init + + -@- The initial transfer itself (node 0 corresponding to the Init). + User can disable the circular mode using function HAL_MDMA_LinkedList_DisableCircularMode, this function will then remove + the connection between last node and first one. + + Function HAL_MDMA_LinkedList_RemoveNode can be used to remove (disconnect) a node from the transfer linked list. + When a linked list is circular (last node connected to first one), if removing node1 (node where the linked list loops), + the linked list remains circular and node 2 becomes the first one. + Note that if the linked list is made circular the transfer will loop infinitely (or until aborted by the user). + + [..] + (+) User can select the transfer trigger mode (parameter TransferTriggerMode) to define the amount of data to be + transfer upon a request : + (++) MDMA_BUFFER_TRANSFER : each request triggers a transfer of BufferTransferLength data + with BufferTransferLength defined within the HAL_MDMA_Init. + (++) MDMA_BLOCK_TRANSFER : each request triggers a transfer of a block + with block size defined within the function HAL_MDMA_Start/HAL_MDMA_Start_IT + or within the current linked list node parameters. + (++) MDMA_REPEAT_BLOCK_TRANSFER : each request triggers a transfer of a number of blocks + with block size and number of blocks defined within the function HAL_MDMA_Start/HAL_MDMA_Start_IT + or within the current linked list node parameters. + (++) MDMA_FULL_TRANSFER : each request triggers a full transfer + all blocks and all nodes(if a linked list has been created using HAL_MDMA_LinkedList_CreateNode \ HAL_MDMA_LinkedList_AddNode). + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_MDMA_Start() to start MDMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred. + (+) Use HAL_MDMA_PollForTransfer() to poll for the end of current transfer or a transfer level + In this case a fixed Timeout can be configured by User depending from his application. + (+) Use HAL_MDMA_Abort() function to abort the current transfer : blocking method this API returns + when the abort ends or timeout (should not be called from an interrupt service routine). + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the MDMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the MDMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_MDMA_Start_IT() to start MDMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. In this + case the MDMA interrupt is configured. + (+) Use HAL_MDMA_IRQHandler() called under MDMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_MDMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e a member of MDMA handle structure). + + (+) Use HAL_MDMA_Abort_IT() function to abort the current transfer : non-blocking method. This API will finish the execution immediately + then the callback XferAbortCallback (if specified by the user) is asserted once the MDMA channel has effectively aborted. + (could be called from an interrupt service routine). + + (+) Use functions HAL_MDMA_RegisterCallback and HAL_MDMA_UnRegisterCallback respectevely to register unregister user callbacks + from the following list : + (++) XferCpltCallback : transfer complete callback. + (++) XferBufferCpltCallback : buffer transfer complete callback. + (++) XferBlockCpltCallback : block transfer complete callback. + (++) XferRepeatBlockCpltCallback : repeated block transfer complete callback. + (++) XferErrorCallback : transfer error callback. + (++) XferAbortCallback : transfer abort complete callback. + + [..] + (+) If the transfer Request corresponds to SW request (MDMA_REQUEST_SW) User can use function HAL_MDMA_GenerateSWRequest to + trigger requests manually. Function HAL_MDMA_GenerateSWRequest must be used with the following precautions: + (++) This function returns an error if used while the Transfer has ended or not started. + (++) If used while the current request has not been served yet (current request transfer on going) + this function returns an error and the new request is ignored. + + Generally this function should be used in conjunctions with the MDMA callbacks: + (++) example 1: + (+++) Configure a transfer with request set to MDMA_REQUEST_SW and trigger mode set to MDMA_BUFFER_TRANSFER + (+++) Register a callback for buffer transfer complete (using callback ID set to HAL_MDMA_XFER_BUFFERCPLT_CB_ID) + (+++) After calling HAL_MDMA_Start_IT the MDMA will issue the transfer of a first BufferTransferLength data. + (+++) When the buffer transfer complete callback is asserted first buffer has been transferred and user can ask for a new buffer transfer + request using HAL_MDMA_GenerateSWRequest. + + (++) example 2: + (+++) Configure a transfer with request set to MDMA_REQUEST_SW and trigger mode set to MDMA_BLOCK_TRANSFER + (+++) Register a callback for block transfer complete (using callback ID HAL_MDMA_XFER_BLOCKCPLT_CB_ID) + (+++) After calling HAL_MDMA_Start_IT the MDMA will issue the transfer of a first block of data. + (+++) When the block transfer complete callback is asserted the first block has been transferred and user can ask + for a new block transfer request using HAL_MDMA_GenerateSWRequest. + + [..] Use HAL_MDMA_GetState() function to return the MDMA state and HAL_MDMA_GetError() in case of error detection. + + *** MDMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in MDMA HAL driver. + + (+) __HAL_MDMA_ENABLE: Enable the specified MDMA Channel. + (+) __HAL_MDMA_DISABLE: Disable the specified MDMA Channel. + (+) __HAL_MDMA_GET_FLAG: Get the MDMA Channel pending flags. + (+) __HAL_MDMA_CLEAR_FLAG: Clear the MDMA Channel pending flags. + (+) __HAL_MDMA_ENABLE_IT: Enable the specified MDMA Channel interrupts. + (+) __HAL_MDMA_DISABLE_IT: Disable the specified MDMA Channel interrupts. + (+) __HAL_MDMA_GET_IT_SOURCE: Check whether the specified MDMA Channel interrupt has occurred or not. + + [..] + (@) You can refer to the header file of the MDMA HAL driver for more useful macros. + + [..] + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup MDMA MDMA + * @brief MDMA HAL module driver + * @{ + */ + +#ifdef HAL_MDMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup MDMA_Private_Constants + * @{ + */ +#define HAL_TIMEOUT_MDMA_ABORT 5U /* 5 ms */ +#define HAL_MDMA_CHANNEL_SIZE 0x40U /* an MDMA instance channel size is 64 byte */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup MDMA_Private_Functions_Prototypes + * @{ + */ +static void MDMA_SetConfig(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount); +static void MDMA_Init(MDMA_HandleTypeDef *hmdma); + +/** + * @} + */ + +/** @addtogroup MDMA_Exported_Functions MDMA Exported Functions + * @{ + */ + +/** @addtogroup MDMA_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to : + Initialize and de-initialize the MDMA channel. + Register and Unregister MDMA callbacks + [..] + The HAL_MDMA_Init() function follows the MDMA channel configuration procedures as described in + reference manual. + The HAL_MDMA_DeInit function allows to deinitialize the MDMA channel. + HAL_MDMA_RegisterCallback and HAL_MDMA_UnRegisterCallback functions allows + respectevely to register/unregister an MDMA callback function. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the MDMA according to the specified + * parameters in the MDMA_InitTypeDef and create the associated handle. + * @param hmdma: Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Init(MDMA_HandleTypeDef *hmdma) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_MDMA_STREAM_ALL_INSTANCE(hmdma->Instance)); + assert_param(IS_MDMA_PRIORITY(hmdma->Init.Priority)); + assert_param(IS_MDMA_ENDIANNESS_MODE(hmdma->Init.Endianness)); + assert_param(IS_MDMA_REQUEST(hmdma->Init.Request)); + assert_param(IS_MDMA_SOURCE_INC(hmdma->Init.SourceInc)); + assert_param(IS_MDMA_DESTINATION_INC(hmdma->Init.DestinationInc)); + assert_param(IS_MDMA_SOURCE_DATASIZE(hmdma->Init.SourceDataSize)); + assert_param(IS_MDMA_DESTINATION_DATASIZE(hmdma->Init.DestDataSize)); + assert_param(IS_MDMA_DATA_ALIGNMENT(hmdma->Init.DataAlignment)); + assert_param(IS_MDMA_SOURCE_BURST(hmdma->Init.SourceBurst)); + assert_param(IS_MDMA_DESTINATION_BURST(hmdma->Init.DestBurst)); + assert_param(IS_MDMA_BUFFER_TRANSFER_LENGTH(hmdma->Init.BufferTransferLength)); + assert_param(IS_MDMA_TRANSFER_TRIGGER_MODE(hmdma->Init.TransferTriggerMode)); + assert_param(IS_MDMA_BLOCK_ADDR_OFFSET(hmdma->Init.SourceBlockAddressOffset)); + assert_param(IS_MDMA_BLOCK_ADDR_OFFSET(hmdma->Init.DestBlockAddressOffset)); + + + /* Allocate lock resource */ + __HAL_UNLOCK(hmdma); + + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Check if the MDMA channel is effectively disabled */ + while((hmdma->Instance->CCR & MDMA_CCR_EN) != 0U) + { + /* Check for the Timeout */ + if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_MDMA_ABORT) + { + /* Update error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_TIMEOUT; + + /* Change the MDMA state */ + hmdma->State = HAL_MDMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Initialize the MDMA channel registers */ + MDMA_Init(hmdma); + + /* Reset the MDMA first/last linkedlist node addresses and node counter */ + hmdma->FirstLinkedListNodeAddress = 0; + hmdma->LastLinkedListNodeAddress = 0; + hmdma->LinkedListNodeCounter = 0; + + /* Initialize the error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NONE; + + /* Initialize the MDMA state */ + hmdma->State = HAL_MDMA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the MDMA peripheral + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_DeInit(MDMA_HandleTypeDef *hmdma) +{ + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Disable the selected MDMA Channelx */ + __HAL_MDMA_DISABLE(hmdma); + + /* Reset MDMA Channel control register */ + hmdma->Instance->CCR = 0; + hmdma->Instance->CTCR = 0; + hmdma->Instance->CBNDTR = 0; + hmdma->Instance->CSAR = 0; + hmdma->Instance->CDAR = 0; + hmdma->Instance->CBRUR = 0; + hmdma->Instance->CLAR = 0; + hmdma->Instance->CTBR = 0; + hmdma->Instance->CMAR = 0; + hmdma->Instance->CMDR = 0; + + /* Clear all flags */ + __HAL_MDMA_CLEAR_FLAG(hmdma,(MDMA_FLAG_TE | MDMA_FLAG_CTC | MDMA_FLAG_BRT | MDMA_FLAG_BT | MDMA_FLAG_BFTC)); + + /* Reset the MDMA first/last linkedlist node addresses and node counter */ + hmdma->FirstLinkedListNodeAddress = 0; + hmdma->LastLinkedListNodeAddress = 0; + hmdma->LinkedListNodeCounter = 0; + + /* Initialize the error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NONE; + + /* Initialize the MDMA state */ + hmdma->State = HAL_MDMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hmdma); + + return HAL_OK; +} + +/** + * @brief Config the Post request Mask address and Mask data + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param MaskAddress: specifies the address to be updated (written) with MaskData after a request is served. + * @param MaskData: specifies the value to be written to MaskAddress after a request is served. + * MaskAddress and MaskData could be used to automatically clear a peripheral flag when the request is served. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_ConfigPostRequestMask(MDMA_HandleTypeDef *hmdma, uint32_t MaskAddress, uint32_t MaskData) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* if HW request set Post Request MaskAddress and MaskData, */ + if((hmdma->Instance->CTCR & MDMA_CTCR_SWRM) == 0U) + { + /* Set the HW request clear Mask and Data */ + hmdma->Instance->CMAR = MaskAddress; + hmdma->Instance->CMDR = MaskData; + + /* + -If the request is done by SW : BWM could be set to 1 or 0. + -If the request is done by a peripheral : + If mask address not set (0) => BWM must be set to 0 + If mask address set (different than 0) => BWM could be set to 1 or 0 + */ + if(MaskAddress == 0U) + { + hmdma->Instance->CTCR &= ~MDMA_CTCR_BWM; + } + else + { + hmdma->Instance->CTCR |= MDMA_CTCR_BWM; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + /* Release Lock */ + __HAL_UNLOCK(hmdma); + + return status; +} + +/** + * @brief Register callbacks + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param CallbackID: User Callback identifier + * @param pCallback: pointer to callbacsk function. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_RegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID, void (* pCallback)(MDMA_HandleTypeDef *_hmdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + switch (CallbackID) + { + case HAL_MDMA_XFER_CPLT_CB_ID: + hmdma->XferCpltCallback = pCallback; + break; + + case HAL_MDMA_XFER_BUFFERCPLT_CB_ID: + hmdma->XferBufferCpltCallback = pCallback; + break; + + case HAL_MDMA_XFER_BLOCKCPLT_CB_ID: + hmdma->XferBlockCpltCallback = pCallback; + break; + + case HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID: + hmdma->XferRepeatBlockCpltCallback = pCallback; + break; + + case HAL_MDMA_XFER_ERROR_CB_ID: + hmdma->XferErrorCallback = pCallback; + break; + + case HAL_MDMA_XFER_ABORT_CB_ID: + hmdma->XferAbortCallback = pCallback; + break; + + default: + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hmdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param CallbackID: User Callback identifier + * a HAL_MDMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_UnRegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + switch (CallbackID) + { + case HAL_MDMA_XFER_CPLT_CB_ID: + hmdma->XferCpltCallback = NULL; + break; + + case HAL_MDMA_XFER_BUFFERCPLT_CB_ID: + hmdma->XferBufferCpltCallback = NULL; + break; + + case HAL_MDMA_XFER_BLOCKCPLT_CB_ID: + hmdma->XferBlockCpltCallback = NULL; + break; + + case HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID: + hmdma->XferRepeatBlockCpltCallback = NULL; + break; + + case HAL_MDMA_XFER_ERROR_CB_ID: + hmdma->XferErrorCallback = NULL; + break; + + case HAL_MDMA_XFER_ABORT_CB_ID: + hmdma->XferAbortCallback = NULL; + break; + + case HAL_MDMA_XFER_ALL_CB_ID: + hmdma->XferCpltCallback = NULL; + hmdma->XferBufferCpltCallback = NULL; + hmdma->XferBlockCpltCallback = NULL; + hmdma->XferRepeatBlockCpltCallback = NULL; + hmdma->XferErrorCallback = NULL; + hmdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hmdma); + + return status; +} + +/** + * @} + */ + +/** @addtogroup MDMA_Exported_Functions_Group2 + * +@verbatim + =============================================================================== + ##### Linked list operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Create a linked list node + (+) Add a node to the MDMA linked list + (+) Remove a node from the MDMA linked list + (+) Enable/Disable linked list circular mode +@endverbatim + * @{ + */ + +/** + * @brief Initializes an MDMA Link Node according to the specified + * parameters in the pMDMA_LinkedListNodeConfig . + * @param pNode: Pointer to a MDMA_LinkNodeTypeDef structure that contains Linked list node + * registers configurations. + * @param pNodeConfig: Pointer to a MDMA_LinkNodeConfTypeDef structure that contains + * the configuration information for the specified MDMA Linked List Node. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_CreateNode(MDMA_LinkNodeTypeDef *pNode, MDMA_LinkNodeConfTypeDef *pNodeConfig) +{ + uint32_t addressMask; + uint32_t blockoffset; + + /* Check the MDMA peripheral state */ + if((pNode == NULL) || (pNodeConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_MDMA_PRIORITY(pNodeConfig->Init.Priority)); + assert_param(IS_MDMA_ENDIANNESS_MODE(pNodeConfig->Init.Endianness)); + assert_param(IS_MDMA_REQUEST(pNodeConfig->Init.Request)); + assert_param(IS_MDMA_SOURCE_INC(pNodeConfig->Init.SourceInc)); + assert_param(IS_MDMA_DESTINATION_INC(pNodeConfig->Init.DestinationInc)); + assert_param(IS_MDMA_SOURCE_DATASIZE(pNodeConfig->Init.SourceDataSize)); + assert_param(IS_MDMA_DESTINATION_DATASIZE(pNodeConfig->Init.DestDataSize)); + assert_param(IS_MDMA_DATA_ALIGNMENT(pNodeConfig->Init.DataAlignment)); + assert_param(IS_MDMA_SOURCE_BURST(pNodeConfig->Init.SourceBurst)); + assert_param(IS_MDMA_DESTINATION_BURST(pNodeConfig->Init.DestBurst)); + assert_param(IS_MDMA_BUFFER_TRANSFER_LENGTH(pNodeConfig->Init.BufferTransferLength)); + assert_param(IS_MDMA_TRANSFER_TRIGGER_MODE(pNodeConfig->Init.TransferTriggerMode)); + assert_param(IS_MDMA_BLOCK_ADDR_OFFSET(pNodeConfig->Init.SourceBlockAddressOffset)); + assert_param(IS_MDMA_BLOCK_ADDR_OFFSET(pNodeConfig->Init.DestBlockAddressOffset)); + + assert_param(IS_MDMA_TRANSFER_LENGTH(pNodeConfig->BlockDataLength)); + assert_param(IS_MDMA_BLOCK_COUNT(pNodeConfig->BlockCount)); + + + /* Configure next Link node Address Register to zero */ + pNode->CLAR = 0; + + /* Configure the Link Node registers*/ + pNode->CTBR = 0; + pNode->CMAR = 0; + pNode->CMDR = 0; + pNode->Reserved = 0; + + /* Write new CTCR Register value */ + pNode->CTCR = pNodeConfig->Init.SourceInc | pNodeConfig->Init.DestinationInc | \ + pNodeConfig->Init.SourceDataSize | pNodeConfig->Init.DestDataSize | \ + pNodeConfig->Init.DataAlignment| pNodeConfig->Init.SourceBurst | \ + pNodeConfig->Init.DestBurst | \ + ((pNodeConfig->Init.BufferTransferLength - 1U) << MDMA_CTCR_TLEN_Pos) | \ + pNodeConfig->Init.TransferTriggerMode; + + /* If SW request set the CTCR register to SW Request Mode*/ + if(pNodeConfig->Init.Request == MDMA_REQUEST_SW) + { + pNode->CTCR |= MDMA_CTCR_SWRM; + } + + /* + -If the request is done by SW : BWM could be set to 1 or 0. + -If the request is done by a peripheral : + If mask address not set (0) => BWM must be set to 0 + If mask address set (different than 0) => BWM could be set to 1 or 0 + */ + if((pNodeConfig->Init.Request == MDMA_REQUEST_SW) || (pNodeConfig->PostRequestMaskAddress != 0U)) + { + pNode->CTCR |= MDMA_CTCR_BWM; + } + + /* Set the new CBNDTR Register value */ + pNode->CBNDTR = ((pNodeConfig->BlockCount - 1U) << MDMA_CBNDTR_BRC_Pos) & MDMA_CBNDTR_BRC; + + /* if block source address offset is negative set the Block Repeat Source address Update Mode to decrement */ + if(pNodeConfig->Init.SourceBlockAddressOffset < 0) + { + pNode->CBNDTR |= MDMA_CBNDTR_BRSUM; + /*write new CBRUR Register value : source repeat block offset */ + blockoffset = (uint32_t)(- pNodeConfig->Init.SourceBlockAddressOffset); + pNode->CBRUR = blockoffset & 0x0000FFFFU; + } + else + { + /*write new CBRUR Register value : source repeat block offset */ + pNode->CBRUR = (((uint32_t) pNodeConfig->Init.SourceBlockAddressOffset) & 0x0000FFFFU); + } + + /* if block destination address offset is negative set the Block Repeat destination address Update Mode to decrement */ + if(pNodeConfig->Init.DestBlockAddressOffset < 0) + { + pNode->CBNDTR |= MDMA_CBNDTR_BRDUM; + /*write new CBRUR Register value : destination repeat block offset */ + blockoffset = (uint32_t)(- pNodeConfig->Init.DestBlockAddressOffset); + pNode->CBRUR |= ((blockoffset & 0x0000FFFFU) << MDMA_CBRUR_DUV_Pos); + } + else + { + /*write new CBRUR Register value : destination repeat block offset */ + pNode->CBRUR |= ((((uint32_t)pNodeConfig->Init.DestBlockAddressOffset) & 0x0000FFFFU) << MDMA_CBRUR_DUV_Pos); + } + + /* Configure MDMA Link Node data length */ + pNode->CBNDTR |= pNodeConfig->BlockDataLength; + + /* Configure MDMA Link Node destination address */ + pNode->CDAR = pNodeConfig->DstAddress; + + /* Configure MDMA Link Node Source address */ + pNode->CSAR = pNodeConfig->SrcAddress; + + /* if HW request set the HW request and the requet CleraMask and ClearData MaskData, */ + if(pNodeConfig->Init.Request != MDMA_REQUEST_SW) + { + /* Set the HW request in CTBR register */ + pNode->CTBR = pNodeConfig->Init.Request & MDMA_CTBR_TSEL; + /* Set the HW request clear Mask and Data */ + pNode->CMAR = pNodeConfig->PostRequestMaskAddress; + pNode->CMDR = pNodeConfig->PostRequestMaskData; + } + + addressMask = pNodeConfig->SrcAddress & 0xFF000000U; + if((addressMask == 0x20000000U) || (addressMask == 0x00000000U)) + { + /*The AHBSbus is used as source (read operation) on channel x */ + pNode->CTBR |= MDMA_CTBR_SBUS; + } + + addressMask = pNodeConfig->DstAddress & 0xFF000000U; + if((addressMask == 0x20000000U) || (addressMask == 0x00000000U)) + { + /*The AHB bus is used as destination (write operation) on channel x */ + pNode->CTBR |= MDMA_CTBR_DBUS; + } + + return HAL_OK; +} + +/** + * @brief Connect a node to the linked list. + * @param hmdma : Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param pNewNode : Pointer to a MDMA_LinkNodeTypeDef structure that contains Linked list node + * to be add to the list. + * @param pPrevNode : Pointer to the new node position in the linked list or zero to insert the new node + * at the end of the list + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_AddNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNewNode, MDMA_LinkNodeTypeDef *pPrevNode) +{ + MDMA_LinkNodeTypeDef *pNode; + uint32_t counter = 0, nodeInserted = 0; + HAL_StatusTypeDef hal_status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if((hmdma == NULL) || (pNewNode == NULL)) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* Check if this is the first node (after the Inititlization node) */ + if((uint32_t)hmdma->FirstLinkedListNodeAddress == 0U) + { + if(pPrevNode == NULL) + { + /* if this is the first node after the initialization + connect this node to the node 0 by updating + the MDMA channel CLAR register to this node address */ + hmdma->Instance->CLAR = (uint32_t)pNewNode; + /* Set the MDMA handle First linked List node*/ + hmdma->FirstLinkedListNodeAddress = pNewNode; + + /*reset New node link */ + pNewNode->CLAR = 0; + + /* Update the Handle last node address */ + hmdma->LastLinkedListNodeAddress = pNewNode; + + hmdma->LinkedListNodeCounter = 1; + } + else + { + hal_status = HAL_ERROR; + } + } + else if(hmdma->FirstLinkedListNodeAddress != pNewNode) + { + /* Check if the node to insert already exists*/ + pNode = hmdma->FirstLinkedListNodeAddress; + while((counter < hmdma->LinkedListNodeCounter) && (hal_status == HAL_OK)) + { + if(pNode->CLAR == (uint32_t)pNewNode) + { + hal_status = HAL_ERROR; /* error this node already exist in the linked list and it is not first node */ + } + pNode = (MDMA_LinkNodeTypeDef *)pNode->CLAR; + counter++; + } + + if(hal_status == HAL_OK) + { + /* Check if the previous node is the last one in the current list or zero */ + if((pPrevNode == hmdma->LastLinkedListNodeAddress) || (pPrevNode == NULL)) + { + /* insert the new node at the end of the list */ + pNewNode->CLAR = hmdma->LastLinkedListNodeAddress->CLAR; + hmdma->LastLinkedListNodeAddress->CLAR = (uint32_t)pNewNode; + /* Update the Handle last node address */ + hmdma->LastLinkedListNodeAddress = pNewNode; + /* Increment the linked list node counter */ + hmdma->LinkedListNodeCounter++; + } + else + { + /*insert the new node after the pPreviousNode node */ + pNode = hmdma->FirstLinkedListNodeAddress; + counter = 0; + while((counter < hmdma->LinkedListNodeCounter) && (nodeInserted == 0U)) + { + counter++; + if(pNode == pPrevNode) + { + /*Insert the new node after the previous one */ + pNewNode->CLAR = pNode->CLAR; + pNode->CLAR = (uint32_t)pNewNode; + /* Increment the linked list node counter */ + hmdma->LinkedListNodeCounter++; + nodeInserted = 1; + } + else + { + pNode = (MDMA_LinkNodeTypeDef *)pNode->CLAR; + } + } + + if(nodeInserted == 0U) + { + hal_status = HAL_ERROR; + } + } + } + } + else + { + hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + + return hal_status; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + /* Return error status */ + return HAL_BUSY; + } +} + +/** + * @brief Disconnect/Remove a node from the transfer linked list. + * @param hmdma : Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param pNode : Pointer to a MDMA_LinkNodeTypeDef structure that contains Linked list node + * to be removed from the list. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_RemoveNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNode) +{ + MDMA_LinkNodeTypeDef *ptmpNode; + uint32_t counter = 0, nodeDeleted = 0; + HAL_StatusTypeDef hal_status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if((hmdma == NULL) || (pNode == NULL)) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* If first and last node are null (no nodes in the list) : return error*/ + if(((uint32_t)hmdma->FirstLinkedListNodeAddress == 0U) || ((uint32_t)hmdma->LastLinkedListNodeAddress == 0U) || (hmdma->LinkedListNodeCounter == 0U)) + { + hal_status = HAL_ERROR; + } + else if(hmdma->FirstLinkedListNodeAddress == pNode) /* Deleting first node */ + { + /* Delete 1st node */ + if(hmdma->LastLinkedListNodeAddress == pNode) + { + /*if the last node is at the same time the first one (1 single node after the init node 0) + then update the last node too */ + + hmdma->FirstLinkedListNodeAddress = 0; + hmdma->LastLinkedListNodeAddress = 0; + hmdma->LinkedListNodeCounter = 0; + + hmdma->Instance->CLAR = 0; + } + else + { + if((uint32_t)hmdma->FirstLinkedListNodeAddress == hmdma->LastLinkedListNodeAddress->CLAR) + { + /* if last node is looping to first (circular list) one update the last node connection */ + hmdma->LastLinkedListNodeAddress->CLAR = pNode->CLAR; + } + + /* if deleting the first node after the initialization + connect the next node to the node 0 by updating + the MDMA channel CLAR register to this node address */ + hmdma->Instance->CLAR = pNode->CLAR; + hmdma->FirstLinkedListNodeAddress = (MDMA_LinkNodeTypeDef *)hmdma->Instance->CLAR; + /* Update the Handle node counter */ + hmdma->LinkedListNodeCounter--; + } + } + else /* Deleting any other node */ + { + /*Deleted node is not the first one : find it */ + ptmpNode = hmdma->FirstLinkedListNodeAddress; + while((counter < hmdma->LinkedListNodeCounter) && (nodeDeleted == 0U)) + { + counter++; + if(ptmpNode->CLAR == ((uint32_t)pNode)) + { + /* if deleting the last node */ + if(pNode == hmdma->LastLinkedListNodeAddress) + { + /*Update the linked list last node address in the handle*/ + hmdma->LastLinkedListNodeAddress = ptmpNode; + } + /* update the next node link after deleting pMDMA_LinkedListNode */ + ptmpNode->CLAR = pNode->CLAR; + nodeDeleted = 1; + /* Update the Handle node counter */ + hmdma->LinkedListNodeCounter--; + } + else + { + ptmpNode = (MDMA_LinkNodeTypeDef *)ptmpNode->CLAR; + } + } + + if(nodeDeleted == 0U) + { + /* last node reashed without finding the node to delete : return error */ + hal_status = HAL_ERROR; + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + + return hal_status; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + /* Return error status */ + return HAL_BUSY; + } +} + +/** + * @brief Make the linked list circular by connecting the last node to the first. + * @param hmdma : Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_EnableCircularMode(MDMA_HandleTypeDef *hmdma) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* If first and last node are null (no nodes in the list) : return error*/ + if(((uint32_t)hmdma->FirstLinkedListNodeAddress == 0U) || ((uint32_t)hmdma->LastLinkedListNodeAddress == 0U) || (hmdma->LinkedListNodeCounter == 0U)) + { + hal_status = HAL_ERROR; + } + else + { + /* to enable circular mode Last Node should be connected to first node */ + hmdma->LastLinkedListNodeAddress->CLAR = (uint32_t)hmdma->FirstLinkedListNodeAddress; + } + + } + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + + return hal_status; +} + +/** + * @brief Disable the linked list circular mode by setting the last node connection to null + * @param hmdma : Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_DisableCircularMode(MDMA_HandleTypeDef *hmdma) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* If first and last node are null (no nodes in the list) : return error*/ + if(((uint32_t)hmdma->FirstLinkedListNodeAddress == 0U) || ((uint32_t)hmdma->LastLinkedListNodeAddress == 0U) || (hmdma->LinkedListNodeCounter == 0U)) + { + hal_status = HAL_ERROR; + } + else + { + /* to disable circular mode Last Node should be connected to NULL */ + hmdma->LastLinkedListNodeAddress->CLAR = 0; + } + + } + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + + return hal_status; +} + +/** + * @} + */ + +/** @addtogroup MDMA_Exported_Functions_Group3 + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start MDMA transfer + (+) Configure the source, destination address and data length and + Start MDMA transfer with interrupt + (+) Abort MDMA transfer + (+) Poll for transfer complete + (+) Generate a SW request (when Request is set to MDMA_REQUEST_SW) + (+) Handle MDMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Starts the MDMA Transfer. + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param SrcAddress : The source memory Buffer address + * @param DstAddress : The destination memory Buffer address + * @param BlockDataLength : The length of a block transfer in bytes + * @param BlockCount : The number of a blocks to be transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Start(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount) +{ + /* Check the parameters */ + assert_param(IS_MDMA_TRANSFER_LENGTH(BlockDataLength)); + assert_param(IS_MDMA_BLOCK_COUNT(BlockCount)); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* Initialize the error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_MDMA_DISABLE(hmdma); + + /* Configure the source, destination address and the data length */ + MDMA_SetConfig(hmdma, SrcAddress, DstAddress, BlockDataLength, BlockCount); + + /* Enable the Peripheral */ + __HAL_MDMA_ENABLE(hmdma); + + if(hmdma->Init.Request == MDMA_REQUEST_SW) + { + /* activate If SW request mode*/ + hmdma->Instance->CCR |= MDMA_CCR_SWRQ; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + /* Return error status */ + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief Starts the MDMA Transfer with interrupts enabled. + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param SrcAddress : The source memory Buffer address + * @param DstAddress : The destination memory Buffer address + * @param BlockDataLength : The length of a block transfer in bytes + * @param BlockCount : The number of a blocks to be transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Start_IT(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount) +{ + /* Check the parameters */ + assert_param(IS_MDMA_TRANSFER_LENGTH(BlockDataLength)); + assert_param(IS_MDMA_BLOCK_COUNT(BlockCount)); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* Initialize the error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_MDMA_DISABLE(hmdma); + + /* Configure the source, destination address and the data length */ + MDMA_SetConfig(hmdma, SrcAddress, DstAddress, BlockDataLength, BlockCount); + + /* Enable Common interrupts i.e Transfer Error IT and Channel Transfer Complete IT*/ + __HAL_MDMA_ENABLE_IT(hmdma, (MDMA_IT_TE | MDMA_IT_CTC)); + + if(hmdma->XferBlockCpltCallback != NULL) + { + /* if Block transfer complete Callback is set enable the corresponding IT*/ + __HAL_MDMA_ENABLE_IT(hmdma, MDMA_IT_BT); + } + + if(hmdma->XferRepeatBlockCpltCallback != NULL) + { + /* if Repeated Block transfer complete Callback is set enable the corresponding IT*/ + __HAL_MDMA_ENABLE_IT(hmdma, MDMA_IT_BRT); + } + + if(hmdma->XferBufferCpltCallback != NULL) + { + /* if buffer transfer complete Callback is set enable the corresponding IT*/ + __HAL_MDMA_ENABLE_IT(hmdma, MDMA_IT_BFTC); + } + + /* Enable the Peripheral */ + __HAL_MDMA_ENABLE(hmdma); + + if(hmdma->Init.Request == MDMA_REQUEST_SW) + { + /* activate If SW request mode*/ + hmdma->Instance->CCR |= MDMA_CCR_SWRQ; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + /* Return error status */ + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief Aborts the MDMA Transfer. + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * + * @note After disabling a MDMA Channel, a check for wait until the MDMA Channel is + * effectively disabled is added. If a Channel is disabled + * while a data transfer is ongoing, the current data will be transferred + * and the Channel will be effectively disabled only after the transfer of + * this single data is finished. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Abort(MDMA_HandleTypeDef *hmdma) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + if(HAL_MDMA_STATE_BUSY != hmdma->State) + { + hmdma->ErrorCode = HAL_MDMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + return HAL_ERROR; + } + else + { + /* Disable all the transfer interrupts */ + __HAL_MDMA_DISABLE_IT(hmdma, (MDMA_IT_TE | MDMA_IT_CTC | MDMA_IT_BT | MDMA_IT_BRT | MDMA_IT_BFTC)); + + /* Disable the channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Check if the MDMA Channel is effectively disabled */ + while((hmdma->Instance->CCR & MDMA_CCR_EN) != 0U) + { + /* Check for the Timeout */ + if( (HAL_GetTick() - tickstart ) > HAL_TIMEOUT_MDMA_ABORT) + { + /* Update error code */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + /* Change the MDMA state */ + hmdma->State = HAL_MDMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Clear all interrupt flags */ + __HAL_MDMA_CLEAR_FLAG(hmdma, (MDMA_FLAG_TE | MDMA_FLAG_CTC | MDMA_FLAG_BT | MDMA_FLAG_BRT | MDMA_FLAG_BFTC)); + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + /* Change the MDMA state*/ + hmdma->State = HAL_MDMA_STATE_READY; + } + + return HAL_OK; +} + +/** + * @brief Aborts the MDMA Transfer in Interrupt mode. + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Abort_IT(MDMA_HandleTypeDef *hmdma) +{ + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + if(HAL_MDMA_STATE_BUSY != hmdma->State) + { + /* No transfer ongoing */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NO_XFER; + + return HAL_ERROR; + } + else + { + /* Set Abort State */ + hmdma->State = HAL_MDMA_STATE_ABORT; + + /* Disable the stream */ + __HAL_MDMA_DISABLE(hmdma); + } + + return HAL_OK; +} + +/** + * @brief Polling for transfer complete. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param CompleteLevel: Specifies the MDMA level complete. + * @param Timeout: Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_PollForTransfer(MDMA_HandleTypeDef *hmdma, HAL_MDMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + uint32_t levelFlag, errorFlag; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_MDMA_LEVEL_COMPLETE(CompleteLevel)); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + if(HAL_MDMA_STATE_BUSY != hmdma->State) + { + /* No transfer ongoing */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NO_XFER; + + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + levelFlag = ((CompleteLevel == HAL_MDMA_FULL_TRANSFER) ? MDMA_FLAG_CTC : \ + (CompleteLevel == HAL_MDMA_BUFFER_TRANSFER)? MDMA_FLAG_BFTC : \ + (CompleteLevel == HAL_MDMA_BLOCK_TRANSFER) ? MDMA_FLAG_BT : \ + MDMA_FLAG_BRT); + + + /* Get timeout */ + tickstart = HAL_GetTick(); + + while(__HAL_MDMA_GET_FLAG(hmdma, levelFlag) == 0U) + { + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_TE) != 0U)) + { + /* Get the transfer error source flag */ + errorFlag = hmdma->Instance->CESR; + + if((errorFlag & MDMA_CESR_TED) == 0U) + { + /* Update error code : Read Transfer error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_READ_XFER; + } + else + { + /* Update error code : Write Transfer error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_WRITE_XFER; + } + + if((errorFlag & MDMA_CESR_TEMD) != 0U) + { + /* Update error code : Error Mask Data */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_MASK_DATA; + } + + if((errorFlag & MDMA_CESR_TELD) != 0U) + { + /* Update error code : Error Linked list */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_LINKED_LIST; + } + + if((errorFlag & MDMA_CESR_ASE) != 0U) + { + /* Update error code : Address/Size alignment error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_ALIGNMENT; + } + + if((errorFlag & MDMA_CESR_BSE) != 0U) + { + /* Update error code : Block Size error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_BLOCK_SIZE; + } + + (void) HAL_MDMA_Abort(hmdma); /* if error then abort the current transfer */ + + /* + Note that the Abort function will + - Clear all transfer flags + - Unlock + - Set the State + */ + + return HAL_ERROR; + + } + + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_TIMEOUT; + + (void) HAL_MDMA_Abort(hmdma); /* if timeout then abort the current transfer */ + + /* + Note that the Abort function will + - Clear all transfer flags + - Unlock + - Set the State + */ + + return HAL_ERROR; + } + } + } + + /* Clear the transfer level flag */ + if(CompleteLevel == HAL_MDMA_BUFFER_TRANSFER) + { + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_BFTC); + + } + else if(CompleteLevel == HAL_MDMA_BLOCK_TRANSFER) + { + __HAL_MDMA_CLEAR_FLAG(hmdma, (MDMA_FLAG_BFTC | MDMA_FLAG_BT)); + + } + else if(CompleteLevel == HAL_MDMA_REPEAT_BLOCK_TRANSFER) + { + __HAL_MDMA_CLEAR_FLAG(hmdma, (MDMA_FLAG_BFTC | MDMA_FLAG_BT | MDMA_FLAG_BRT)); + } + else if(CompleteLevel == HAL_MDMA_FULL_TRANSFER) + { + __HAL_MDMA_CLEAR_FLAG(hmdma, (MDMA_FLAG_BRT | MDMA_FLAG_BT | MDMA_FLAG_BFTC | MDMA_FLAG_CTC)); + + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Generate an MDMA SW request trigger to activate the request on the given Channel. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_GenerateSWRequest(MDMA_HandleTypeDef *hmdma) +{ + uint32_t request_mode; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Get the softawre request mode */ + request_mode = hmdma->Instance->CTCR & MDMA_CTCR_SWRM; + + if((hmdma->Instance->CCR & MDMA_CCR_EN) == 0U) + { + /* if no Transfer on going (MDMA enable bit not set) return error */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NO_XFER; + + return HAL_ERROR; + } + else if(((hmdma->Instance->CISR & MDMA_CISR_CRQA) != 0U) || (request_mode == 0U)) + { + /* if an MDMA ongoing request has not yet end or if request mode is not SW request return error */ + hmdma->ErrorCode = HAL_MDMA_ERROR_BUSY; + + return HAL_ERROR; + } + else + { + /* Set the SW request bit to activate the request on the Channel */ + hmdma->Instance->CCR |= MDMA_CCR_SWRQ; + + return HAL_OK; + } +} + +/** + * @brief Handles MDMA interrupt request. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval None + */ +void HAL_MDMA_IRQHandler(MDMA_HandleTypeDef *hmdma) +{ + __IO uint32_t count = 0; + uint32_t timeout = SystemCoreClock / 9600U; + + uint32_t generalIntFlag, errorFlag; + + /* General Interrupt Flag management ****************************************/ + generalIntFlag = 1UL << ((((uint32_t)hmdma->Instance - (uint32_t)(MDMA_Channel0))/HAL_MDMA_CHANNEL_SIZE) & 0x1FU); + if((MDMA->GISR0 & generalIntFlag) == 0U) + { + return; /* the General interrupt flag for the current channel is down , nothing to do */ + } + + /* Transfer Error Interrupt management ***************************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_TE) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_TE) != 0U) + { + /* Disable the transfer error interrupt */ + __HAL_MDMA_DISABLE_IT(hmdma, MDMA_IT_TE); + + /* Get the transfer error source flag */ + errorFlag = hmdma->Instance->CESR; + + if((errorFlag & MDMA_CESR_TED) == 0U) + { + /* Update error code : Read Transfer error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_READ_XFER; + } + else + { + /* Update error code : Write Transfer error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_WRITE_XFER; + } + + if((errorFlag & MDMA_CESR_TEMD) != 0U) + { + /* Update error code : Error Mask Data */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_MASK_DATA; + } + + if((errorFlag & MDMA_CESR_TELD) != 0U) + { + /* Update error code : Error Linked list */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_LINKED_LIST; + } + + if((errorFlag & MDMA_CESR_ASE) != 0U) + { + /* Update error code : Address/Size alignment error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_ALIGNMENT; + } + + if((errorFlag & MDMA_CESR_BSE) != 0U) + { + /* Update error code : Block Size error error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_BLOCK_SIZE; + } + + /* Clear the transfer error flags */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_TE); + } + } + + /* Buffer Transfer Complete Interrupt management ******************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_BFTC) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_BFTC) != 0U) + { + /* Clear the buffer transfer complete flag */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_BFTC); + + if(hmdma->XferBufferCpltCallback != NULL) + { + /* Buffer transfer callback */ + hmdma->XferBufferCpltCallback(hmdma); + } + } + } + + /* Block Transfer Complete Interrupt management ******************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_BT) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_BT) != 0U) + { + /* Clear the block transfer complete flag */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_BT); + + if(hmdma->XferBlockCpltCallback != NULL) + { + /* Block transfer callback */ + hmdma->XferBlockCpltCallback(hmdma); + } + } + } + + /* Repeated Block Transfer Complete Interrupt management ******************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_BRT) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_BRT) != 0U) + { + /* Clear the repeat block transfer complete flag */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_BRT); + + if(hmdma->XferRepeatBlockCpltCallback != NULL) + { + /* Repeated Block transfer callback */ + hmdma->XferRepeatBlockCpltCallback(hmdma); + } + } + } + + /* Channel Transfer Complete Interrupt management ***********************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_CTC) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_CTC) != 0U) + { + /* Disable all the transfer interrupts */ + __HAL_MDMA_DISABLE_IT(hmdma, (MDMA_IT_TE | MDMA_IT_CTC | MDMA_IT_BT | MDMA_IT_BRT | MDMA_IT_BFTC)); + + if(HAL_MDMA_STATE_ABORT == hmdma->State) + { + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + /* Change the DMA state */ + hmdma->State = HAL_MDMA_STATE_READY; + + if(hmdma->XferAbortCallback != NULL) + { + hmdma->XferAbortCallback(hmdma); + } + return; + } + + /* Clear the Channel Transfer Complete flag */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_CTC); + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_READY; + + if(hmdma->XferCpltCallback != NULL) + { + /* Channel Transfer Complete callback */ + hmdma->XferCpltCallback(hmdma); + } + } + } + + /* manage error case */ + if(hmdma->ErrorCode != HAL_MDMA_ERROR_NONE) + { + hmdma->State = HAL_MDMA_STATE_ABORT; + + /* Disable the channel */ + __HAL_MDMA_DISABLE(hmdma); + + do + { + if (++count > timeout) + { + break; + } + } + while((hmdma->Instance->CCR & MDMA_CCR_EN) != 0U); + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + if((hmdma->Instance->CCR & MDMA_CCR_EN) != 0U) + { + /* Change the MDMA state to error if MDMA disable fails */ + hmdma->State = HAL_MDMA_STATE_ERROR; + } + else + { + /* Change the MDMA state to Ready if MDMA disable success */ + hmdma->State = HAL_MDMA_STATE_READY; + } + + + if (hmdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hmdma->XferErrorCallback(hmdma); + } + } +} + +/** + * @} + */ + +/** @addtogroup MDMA_Exported_Functions_Group4 + * +@verbatim + =============================================================================== + ##### State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the MDMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Returns the MDMA state. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL state + */ +HAL_MDMA_StateTypeDef HAL_MDMA_GetState(MDMA_HandleTypeDef *hmdma) +{ + return hmdma->State; +} + +/** + * @brief Return the MDMA error code + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval MDMA Error Code + */ +uint32_t HAL_MDMA_GetError(MDMA_HandleTypeDef *hmdma) +{ + return hmdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup MDMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the MDMA Transfer parameter. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param BlockDataLength : The length of a block transfer in bytes + * @param BlockCount: The number of blocks to be transferred + * @retval HAL status + */ +static void MDMA_SetConfig(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount) +{ + uint32_t addressMask; + + /* Configure the MDMA Channel data length */ + MODIFY_REG(hmdma->Instance->CBNDTR ,MDMA_CBNDTR_BNDT, (BlockDataLength & MDMA_CBNDTR_BNDT)); + + /* Configure the MDMA block repeat count */ + MODIFY_REG(hmdma->Instance->CBNDTR , MDMA_CBNDTR_BRC , ((BlockCount - 1U) << MDMA_CBNDTR_BRC_Pos) & MDMA_CBNDTR_BRC); + + /* Clear all interrupt flags */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_TE | MDMA_FLAG_CTC | MDMA_CISR_BRTIF | MDMA_CISR_BTIF | MDMA_CISR_TCIF); + + /* Configure MDMA Channel destination address */ + hmdma->Instance->CDAR = DstAddress; + + /* Configure MDMA Channel Source address */ + hmdma->Instance->CSAR = SrcAddress; + + addressMask = SrcAddress & 0xFF000000U; + if((addressMask == 0x20000000U) || (addressMask == 0x00000000U)) + { + /*The AHBSbus is used as source (read operation) on channel x */ + hmdma->Instance->CTBR |= MDMA_CTBR_SBUS; + } + else + { + /*The AXI bus is used as source (read operation) on channel x */ + hmdma->Instance->CTBR &= (~MDMA_CTBR_SBUS); + } + + addressMask = DstAddress & 0xFF000000U; + if((addressMask == 0x20000000U) || (addressMask == 0x00000000U)) + { + /*The AHB bus is used as destination (write operation) on channel x */ + hmdma->Instance->CTBR |= MDMA_CTBR_DBUS; + } + else + { + /*The AXI bus is used as destination (write operation) on channel x */ + hmdma->Instance->CTBR &= (~MDMA_CTBR_DBUS); + } + + /* Set the linked list register to the first node of the list */ + hmdma->Instance->CLAR = (uint32_t)hmdma->FirstLinkedListNodeAddress; +} + +/** + * @brief Initializes the MDMA handle according to the specified + * parameters in the MDMA_InitTypeDef + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval None + */ +static void MDMA_Init(MDMA_HandleTypeDef *hmdma) +{ + uint32_t blockoffset; + + /* Prepare the MDMA Channel configuration */ + hmdma->Instance->CCR = hmdma->Init.Priority | hmdma->Init.Endianness; + + /* Write new CTCR Register value */ + hmdma->Instance->CTCR = hmdma->Init.SourceInc | hmdma->Init.DestinationInc | \ + hmdma->Init.SourceDataSize | hmdma->Init.DestDataSize | \ + hmdma->Init.DataAlignment | hmdma->Init.SourceBurst | \ + hmdma->Init.DestBurst | \ + ((hmdma->Init.BufferTransferLength - 1U) << MDMA_CTCR_TLEN_Pos) | \ + hmdma->Init.TransferTriggerMode; + + /* If SW request set the CTCR register to SW Request Mode */ + if(hmdma->Init.Request == MDMA_REQUEST_SW) + { + /* + -If the request is done by SW : BWM could be set to 1 or 0. + -If the request is done by a peripheral : + If mask address not set (0) => BWM must be set to 0 + If mask address set (different than 0) => BWM could be set to 1 or 0 + */ + hmdma->Instance->CTCR |= (MDMA_CTCR_SWRM | MDMA_CTCR_BWM); + } + + /* Reset CBNDTR Register */ + hmdma->Instance->CBNDTR = 0; + + /* if block source address offset is negative set the Block Repeat Source address Update Mode to decrement */ + if(hmdma->Init.SourceBlockAddressOffset < 0) + { + hmdma->Instance->CBNDTR |= MDMA_CBNDTR_BRSUM; + /* Write new CBRUR Register value : source repeat block offset */ + blockoffset = (uint32_t)(- hmdma->Init.SourceBlockAddressOffset); + hmdma->Instance->CBRUR = (blockoffset & 0x0000FFFFU); + } + else + { + /* Write new CBRUR Register value : source repeat block offset */ + hmdma->Instance->CBRUR = (((uint32_t)hmdma->Init.SourceBlockAddressOffset) & 0x0000FFFFU); + } + + /* If block destination address offset is negative set the Block Repeat destination address Update Mode to decrement */ + if(hmdma->Init.DestBlockAddressOffset < 0) + { + hmdma->Instance->CBNDTR |= MDMA_CBNDTR_BRDUM; + /* Write new CBRUR Register value : destination repeat block offset */ + blockoffset = (uint32_t)(- hmdma->Init.DestBlockAddressOffset); + hmdma->Instance->CBRUR |= ((blockoffset & 0x0000FFFFU) << MDMA_CBRUR_DUV_Pos); + } + else + { + /*write new CBRUR Register value : destination repeat block offset */ + hmdma->Instance->CBRUR |= ((((uint32_t)hmdma->Init.DestBlockAddressOffset) & 0x0000FFFFU) << MDMA_CBRUR_DUV_Pos); + } + + /* if HW request set the HW request and the requet CleraMask and ClearData MaskData, */ + if(hmdma->Init.Request != MDMA_REQUEST_SW) + { + /* Set the HW request in CTRB register */ + hmdma->Instance->CTBR = hmdma->Init.Request & MDMA_CTBR_TSEL; + } + else /* SW request : reset the CTBR register */ + { + hmdma->Instance->CTBR = 0; + } + + /* Write Link Address Register */ + hmdma->Instance->CLAR = 0; +} + +/** + * @} + */ + +#endif /* HAL_MDMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c new file mode 100644 index 0000000..71a7669 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_nor.c @@ -0,0 +1,1642 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_nor.c + * @author MCD Application Team + * @brief NOR HAL module driver. + * This file provides a generic firmware to drive NOR memories mounted + * as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control NOR flash memories. It uses the FMC layer functions to interface + with NOR devices. This driver is used as follows: + + (+) NOR flash memory configuration sequence using the function HAL_NOR_Init() + with control and timing parameters for both normal and extended mode. + + (+) Read NOR flash memory manufacturer code and device IDs using the function + HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef + structure declared by the function caller. + + (+) Access NOR flash memory by read/write data unit operations using the functions + HAL_NOR_Read(), HAL_NOR_Program(). + + (+) Perform NOR flash erase block/chip operations using the functions + HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip(). + + (+) Read the NOR flash CFI (common flash interface) IDs using the function + HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef + structure declared by the function caller. + + (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/ + HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation + + (+) You can monitor the NOR device HAL state by calling the function + HAL_NOR_GetState() + [..] + (@) This driver is a set of generic APIs which handle standard NOR flash operations. + If a NOR flash device contains different operations and/or implementations, + it should be implemented separately. + + *** NOR HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in NOR HAL driver. + + (+) NOR_WRITE : NOR memory write data to specified address + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_NOR_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_NOR_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : NOR MspInit. + (+) MspDeInitCallback : NOR MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_NOR_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : NOR MspInit. + (+) MspDeInitCallback : NOR MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_NOR_Init and if the state is HAL_NOR_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_NOR_Init + and HAL_NOR_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_NOR_Init and HAL_NOR_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_NOR_RegisterCallback before calling HAL_NOR_DeInit + or HAL_NOR_Init function. + + When The compilation define USE_HAL_NOR_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +#ifdef HAL_NOR_MODULE_ENABLED + +/** @defgroup NOR NOR + * @brief NOR driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup NOR_Private_Defines NOR Private Defines + * @{ + */ + +/* Constants to define address to set to write a command */ +#define NOR_CMD_ADDRESS_FIRST_BYTE (uint16_t)0x0AAA +#define NOR_CMD_ADDRESS_FIRST_CFI_BYTE (uint16_t)0x00AA +#define NOR_CMD_ADDRESS_SECOND_BYTE (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_THIRD_BYTE (uint16_t)0x0AAA + +#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055 +#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AA +#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555 +#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AA +#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555 + +/* Constants to define data to program a command */ +#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0 +#define NOR_CMD_DATA_FIRST (uint16_t)0x00AA +#define NOR_CMD_DATA_SECOND (uint16_t)0x0055 +#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090 +#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0 +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080 +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AA +#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055 +#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010 +#define NOR_CMD_DATA_CFI (uint16_t)0x0098 + +#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25 +#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29 +#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30 + +#define NOR_CMD_READ_ARRAY (uint16_t)0x00FF +#define NOR_CMD_WORD_PROGRAM (uint16_t)0x0040 +#define NOR_CMD_BUFFERED_PROGRAM (uint16_t)0x00E8 +#define NOR_CMD_CONFIRM (uint16_t)0x00D0 +#define NOR_CMD_BLOCK_ERASE (uint16_t)0x0020 +#define NOR_CMD_BLOCK_UNLOCK (uint16_t)0x0060 +#define NOR_CMD_READ_STATUS_REG (uint16_t)0x0070 +#define NOR_CMD_CLEAR_STATUS_REG (uint16_t)0x0050 + +/* Mask on NOR STATUS REGISTER */ +#define NOR_MASK_STATUS_DQ4 (uint16_t)0x0010 +#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020 +#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040 +#define NOR_MASK_STATUS_DQ7 (uint16_t)0x0080 + +/* Address of the primary command set */ +#define NOR_ADDRESS_COMMAND_SET (uint16_t)0x0013 + +/* Command set code assignment (defined in JEDEC JEP137B version may 2004) */ +#define NOR_INTEL_SHARP_EXT_COMMAND_SET (uint16_t)0x0001 /* Supported in this driver */ +#define NOR_AMD_FUJITSU_COMMAND_SET (uint16_t)0x0002 /* Supported in this driver */ +#define NOR_INTEL_STANDARD_COMMAND_SET (uint16_t)0x0003 /* Not Supported in this driver */ +#define NOR_AMD_FUJITSU_EXT_COMMAND_SET (uint16_t)0x0004 /* Not Supported in this driver */ +#define NOR_WINDBOND_STANDARD_COMMAND_SET (uint16_t)0x0006 /* Not Supported in this driver */ +#define NOR_MITSUBISHI_STANDARD_COMMAND_SET (uint16_t)0x0100 /* Not Supported in this driver */ +#define NOR_MITSUBISHI_EXT_COMMAND_SET (uint16_t)0x0101 /* Not Supported in this driver */ +#define NOR_PAGE_WRITE_COMMAND_SET (uint16_t)0x0102 /* Not Supported in this driver */ +#define NOR_INTEL_PERFORMANCE_COMMAND_SET (uint16_t)0x0200 /* Not Supported in this driver */ +#define NOR_INTEL_DATA_COMMAND_SET (uint16_t)0x0210 /* Not Supported in this driver */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup NOR_Private_Variables NOR Private Variables + * @{ + */ + +static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B; + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup NOR_Exported_Functions NOR Exported Functions + * @{ + */ + +/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### NOR Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the NOR memory + +@endverbatim + * @{ + */ + +/** + * @brief Perform the NOR memory Initialization sequence + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Timing pointer to NOR control timing structure + * @param ExtTiming pointer to NOR extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR handle parameter */ + if (hnor == NULL) + { + return HAL_ERROR; + } + + if (hnor->State == HAL_NOR_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hnor->Lock = HAL_UNLOCKED; + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + if (hnor->MspInitCallback == NULL) + { + hnor->MspInitCallback = HAL_NOR_MspInit; + } + + /* Init the low level hardware */ + hnor->MspInitCallback(hnor); +#else + /* Initialize the low level hardware (MSP) */ + HAL_NOR_MspInit(hnor); +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + } + + /* Initialize NOR control Interface */ + (void)FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init)); + + /* Initialize NOR timing Interface */ + (void)FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank); + + /* Initialize NOR extended mode timing Interface */ + (void)FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, + hnor->Init.NSBank, hnor->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank); + + /* Initialize NOR Memory Data Width*/ + if (hnor->Init.MemoryDataWidth == FMC_NORSRAM_MEM_BUS_WIDTH_8) + { + uwNORMemoryDataWidth = NOR_MEMORY_8B; + } + else + { + uwNORMemoryDataWidth = NOR_MEMORY_16B; + } + + /* Enable FMC Peripheral */ + __FMC_ENABLE(); + + /* Initialize the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + if (hnor->Init.WriteOperation == FMC_WRITE_OPERATION_DISABLE) + { + (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_PROTECTED; + } + else + { + /* Get the value of the command set */ + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI_BYTE), + NOR_CMD_DATA_CFI); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); + } + + hnor->CommandSet = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_ADDRESS_COMMAND_SET); + + status = HAL_NOR_ReturnToReadMode(hnor); + } + + return status; +} + +/** + * @brief Perform NOR memory De-Initialization sequence + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor) +{ +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) + if (hnor->MspDeInitCallback == NULL) + { + hnor->MspDeInitCallback = HAL_NOR_MspDeInit; + } + + /* DeInit the low level hardware */ + hnor->MspDeInitCallback(hnor); +#else + /* De-Initialize the low level hardware (MSP) */ + HAL_NOR_MspDeInit(hnor); +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + + /* Configure the NOR registers with their reset values */ + (void)FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank); + + /* Reset the NOR controller state */ + hnor->State = HAL_NOR_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hnor); + + return HAL_OK; +} + +/** + * @brief NOR MSP Init + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval None + */ +__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspInit could be implemented in the user file + */ +} + +/** + * @brief NOR MSP DeInit + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval None + */ +__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief NOR MSP Wait for Ready/Busy signal + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Timeout Maximum timeout value + * @retval None + */ +__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hnor); + UNUSED(Timeout); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_NOR_MspWait could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### NOR Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the NOR memory + +@endverbatim + * @{ + */ + +/** + * @brief Read NOR flash IDs + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pNOR_ID pointer to NOR ID structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read ID command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_AUTO_SELECT); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_AUTO_SELECT); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_DATA_AUTO_SELECT); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read the NOR IDs */ + pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS); + pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE1_ADDR); + pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE2_ADDR); + pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, + DEVICE_CODE3_ADDR); + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Returns the NOR memory to Read mode. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Read data from NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pAddress pointer to Device address + * @param pData pointer to read data + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_READ_RESET); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_READ_RESET); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(pAddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read the data */ + *pData = (uint16_t)(*(__IO uint32_t *)pAddress); + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Program data to NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pAddress Device address + * @param pData pointer to the data to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send program data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_PROGRAM); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(pAddress, NOR_CMD_WORD_PROGRAM); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Write the data */ + NOR_WRITE(pAddress, *pData); + } + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Reads a half-word buffer from the NOR memory. + * @param hnor pointer to the NOR handle + * @param uwAddress NOR memory internal address to read from. + * @param pData pointer to the buffer that receives the data read from the + * NOR memory. + * @param uwBufferSize number of Half word to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize) +{ + uint32_t deviceaddress; + uint32_t size = uwBufferSize; + uint32_t address = uwAddress; + uint16_t *data = pData; + HAL_NOR_StateTypeDef state; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read data command */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_READ_RESET); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_READ_RESET); + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE(deviceaddress, NOR_CMD_READ_ARRAY); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Read buffer */ + while (size > 0U) + { + *data = *(__IO uint16_t *)address; + data++; + address += 2U; + size--; + } + } + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Writes a half-word buffer to the NOR memory. This function must be used + only with S29GL128P NOR memory. + * @param hnor pointer to the NOR handle + * @param uwAddress NOR memory internal start write address + * @param pData pointer to source data buffer. + * @param uwBufferSize Size of the buffer to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, + uint32_t uwBufferSize) +{ + uint16_t *p_currentaddress; + const uint16_t *p_endaddress; + uint16_t *data = pData; + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Initialize variables */ + p_currentaddress = (uint16_t *)(deviceaddress + uwAddress); + p_endaddress = (uint16_t *)(deviceaddress + uwAddress + (2U * (uwBufferSize - 1U))); + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + /* Issue unlock command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + } + else + { + /* Issue unlock command sequence */ + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + } + /* Write Buffer Load Command */ + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG); + NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U)); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + /* Write Buffer Load Command */ + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_BUFFERED_PROGRAM); + NOR_WRITE((deviceaddress + uwAddress), (uint16_t)(uwBufferSize - 1U)); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + if (status != HAL_ERROR) + { + /* Load Data into NOR Buffer */ + while (p_currentaddress <= p_endaddress) + { + NOR_WRITE(p_currentaddress, *data); + + data++; + p_currentaddress ++; + } + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM); + } + else /* => hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET */ + { + NOR_WRITE((deviceaddress + uwAddress), NOR_CMD_CONFIRM); + } + } + + /* Check the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; + +} + +/** + * @brief Erase the specified block of the NOR memory + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param BlockAddress Block to erase address + * @param Address Device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send block erase command sequence */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH); + } + NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE); + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + NOR_WRITE((BlockAddress + Address), NOR_CMD_BLOCK_UNLOCK); + NOR_WRITE((BlockAddress + Address), NOR_CMD_CONFIRM); + NOR_WRITE((BlockAddress + Address), NOR_CMD_BLOCK_ERASE); + NOR_WRITE((BlockAddress + Address), NOR_CMD_CONFIRM); + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR memory status and update the controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; + +} + +/** + * @brief Erase the entire NOR chip. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Address Device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address) +{ + uint32_t deviceaddress; + HAL_StatusTypeDef status = HAL_OK; + UNUSED(Address); + + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send NOR chip erase command sequence */ + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_BYTE), + NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND_BYTE), + NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD_BYTE), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), + NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH); + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), + NOR_CMD_DATA_CHIP_ERASE); + } + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_ERROR; + } + + /* Check the NOR memory status and update the controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return status; +} + +/** + * @brief Read NOR flash CFI IDs + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param pNOR_CFI pointer to NOR CFI IDs structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI) +{ + uint32_t deviceaddress; + HAL_NOR_StateTypeDef state; + + /* Check the NOR controller state */ + state = hnor->State; + if (state == HAL_NOR_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_NOR_STATE_PROTECTED) + { + return HAL_ERROR; + } + else if (state == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Select the NOR device address */ + if (hnor->Init.NSBank == FMC_NORSRAM_BANK1) + { + deviceaddress = NOR_MEMORY_ADRESS1; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2) + { + deviceaddress = NOR_MEMORY_ADRESS2; + } + else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3) + { + deviceaddress = NOR_MEMORY_ADRESS3; + } + else /* FMC_NORSRAM_BANK4 */ + { + deviceaddress = NOR_MEMORY_ADRESS4; + } + + /* Send read CFI query command */ + if (uwNORMemoryDataWidth == NOR_MEMORY_8B) + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI_BYTE), + NOR_CMD_DATA_CFI); + } + else + { + NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI); + } + /* read the NOR CFI information */ + pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS); + pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS); + pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS); + pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS); + + /* Check the NOR controller state */ + hnor->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User NOR Callback + * To be used to override the weak predefined callback + * @param hnor : NOR handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_NOR_MSP_INIT_CB_ID NOR MspInit callback ID + * @arg @ref HAL_NOR_MSP_DEINIT_CB_ID NOR MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId, + pNOR_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_NOR_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + state = hnor->State; + if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_NOR_MSP_INIT_CB_ID : + hnor->MspInitCallback = pCallback; + break; + case HAL_NOR_MSP_DEINIT_CB_ID : + hnor->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User NOR Callback + * NOR Callback is redirected to the weak predefined callback + * @param hnor : NOR handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_NOR_MSP_INIT_CB_ID NOR MspInit callback ID + * @arg @ref HAL_NOR_MSP_DEINIT_CB_ID NOR MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_NOR_StateTypeDef state; + + state = hnor->State; + if ((state == HAL_NOR_STATE_READY) || (state == HAL_NOR_STATE_RESET) || (state == HAL_NOR_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_NOR_MSP_INIT_CB_ID : + hnor->MspInitCallback = HAL_NOR_MspInit; + break; + case HAL_NOR_MSP_DEINIT_CB_ID : + hnor->MspDeInitCallback = HAL_NOR_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* (USE_HAL_NOR_REGISTER_CALLBACKS) */ + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group3 NOR Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### NOR Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the NOR interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically NOR write operation. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor) +{ + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_PROTECTED) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Enable write operation */ + (void)FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically NOR write operation. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor) +{ + /* Check the NOR controller state */ + if (hnor->State == HAL_NOR_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hnor); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_BUSY; + + /* Disable write operation */ + (void)FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); + + /* Update the NOR controller state */ + hnor->State = HAL_NOR_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hnor); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup NOR_Exported_Functions_Group4 NOR State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### NOR State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the NOR controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief return the NOR controller state + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @retval NOR controller state + */ +HAL_NOR_StateTypeDef HAL_NOR_GetState(const NOR_HandleTypeDef *hnor) +{ + return hnor->State; +} + +/** + * @brief Returns the NOR operation status. + * @param hnor pointer to a NOR_HandleTypeDef structure that contains + * the configuration information for NOR module. + * @param Address Device address + * @param Timeout NOR programming Timeout + * @retval NOR_Status The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR + * or HAL_NOR_STATUS_TIMEOUT + */ +HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout) +{ + HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING; + uint16_t tmpsr1; + uint16_t tmpsr2; + uint32_t tickstart; + + /* Poll on NOR memory Ready/Busy signal ------------------------------------*/ + HAL_NOR_MspWait(hnor, Timeout); + + /* Get the NOR memory operation status -------------------------------------*/ + + /* Get tick */ + tickstart = HAL_GetTick(); + + if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET) + { + while ((status != HAL_NOR_STATUS_SUCCESS) && (status != HAL_NOR_STATUS_TIMEOUT)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + status = HAL_NOR_STATUS_TIMEOUT; + } + } + + /* Read NOR status register (DQ6 and DQ5) */ + tmpsr1 = *(__IO uint16_t *)Address; + tmpsr2 = *(__IO uint16_t *)Address; + + /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */ + if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6)) + { + return HAL_NOR_STATUS_SUCCESS ; + } + + if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5) + { + status = HAL_NOR_STATUS_ONGOING; + } + + tmpsr1 = *(__IO uint16_t *)Address; + tmpsr2 = *(__IO uint16_t *)Address; + + /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */ + if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6)) + { + return HAL_NOR_STATUS_SUCCESS; + } + if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5) + { + return HAL_NOR_STATUS_ERROR; + } + } + } + else if (hnor->CommandSet == NOR_INTEL_SHARP_EXT_COMMAND_SET) + { + do + { + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + tmpsr2 = *(__IO uint16_t *)(Address); + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_NOR_STATUS_TIMEOUT; + } + } + } while ((tmpsr2 & NOR_MASK_STATUS_DQ7) == 0U); + + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + tmpsr1 = *(__IO uint16_t *)(Address); + if ((tmpsr1 & (NOR_MASK_STATUS_DQ5 | NOR_MASK_STATUS_DQ4)) != 0U) + { + /* Clear the Status Register */ + NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG); + status = HAL_NOR_STATUS_ERROR; + } + else + { + status = HAL_NOR_STATUS_SUCCESS; + } + } + else + { + /* Primary command set not supported by the driver */ + status = HAL_NOR_STATUS_ERROR; + } + + /* Return the operation status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_NOR_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd.c new file mode 100644 index 0000000..221cdfc --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd.c @@ -0,0 +1,2347 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pcd.c + * @author MCD Application Team + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using + (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode) + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable PCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum); +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and initialize the associated handle. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + uint8_t i; + + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + + if (hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback = HAL_PCD_SOFCallback; + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + hpcd->ResetCallback = HAL_PCD_ResetCallback; + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; + + if (hpcd->MspInitCallback == NULL) + { + hpcd->MspInitCallback = HAL_PCD_MspInit; + } + + /* Init the low level hardware */ + hpcd->MspInitCallback(hpcd); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); +#endif /* (USE_HAL_PCD_REGISTER_CALLBACKS) */ + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /*Init the Core (common init.) */ + if (USB_CoreInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Force Device Mode */ + if (USB_SetCurrentMode(hpcd->Instance, USB_DEVICE_MODE) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + /* Init endpoints structures */ + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + /* Init ep structure */ + hpcd->IN_ep[i].is_in = 1U; + hpcd->IN_ep[i].num = i; + hpcd->IN_ep[i].tx_fifo_num = i; + /* Control until ep is activated */ + hpcd->IN_ep[i].type = EP_TYPE_CTRL; + hpcd->IN_ep[i].maxpacket = 0U; + hpcd->IN_ep[i].xfer_buff = 0U; + hpcd->IN_ep[i].xfer_len = 0U; + } + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + hpcd->OUT_ep[i].is_in = 0U; + hpcd->OUT_ep[i].num = i; + /* Control until ep is activated */ + hpcd->OUT_ep[i].type = EP_TYPE_CTRL; + hpcd->OUT_ep[i].maxpacket = 0U; + hpcd->OUT_ep[i].xfer_buff = 0U; + hpcd->OUT_ep[i].xfer_len = 0U; + } + + /* Init Device */ + if (USB_DevInit(hpcd->Instance, hpcd->Init) != HAL_OK) + { + hpcd->State = HAL_PCD_STATE_ERROR; + return HAL_ERROR; + } + + hpcd->USB_Address = 0U; + hpcd->State = HAL_PCD_STATE_READY; + + /* Activate LPM */ + if (hpcd->Init.lpm_enable == 1U) + { + (void)HAL_PCDEx_ActivateLPM(hpcd); + } + + (void)USB_DevDisconnect(hpcd->Instance); + + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if (hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + if (USB_StopDevice(hpcd->Instance) != HAL_OK) + { + return HAL_ERROR; + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + if (hpcd->MspDeInitCallback == NULL) + { + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware */ + hpcd->MspDeInitCallback(hpcd); +#else + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_PCD_MspDeInit(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User USB PCD Callback + * To be used instead of the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID USB PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, + HAL_PCD_CallbackIDTypeDef CallbackID, + pPCD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = pCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = pCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = pCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = pCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = pCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = pCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = pCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = pCallback; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Unregister an USB PCD Callback + * USB PCD callback is redirected to the weak predefined callback + * @param hpcd USB PCD handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_PCD_SOF_CB_ID USB PCD SOF callback ID + * @arg @ref HAL_PCD_SETUPSTAGE_CB_ID USB PCD Setup callback ID + * @arg @ref HAL_PCD_RESET_CB_ID USB PCD Reset callback ID + * @arg @ref HAL_PCD_SUSPEND_CB_ID USB PCD Suspend callback ID + * @arg @ref HAL_PCD_RESUME_CB_ID USB PCD Resume callback ID + * @arg @ref HAL_PCD_CONNECT_CB_ID USB PCD Connect callback ID + * @arg @ref HAL_PCD_DISCONNECT_CB_ID USB PCD Disconnect callback ID + * @arg @ref HAL_PCD_MSPINIT_CB_ID MspDeInit callback ID + * @arg @ref HAL_PCD_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + /* Setup Legacy weak Callbacks */ + if (hpcd->State == HAL_PCD_STATE_READY) + { + switch (CallbackID) + { + case HAL_PCD_SOF_CB_ID : + hpcd->SOFCallback = HAL_PCD_SOFCallback; + break; + + case HAL_PCD_SETUPSTAGE_CB_ID : + hpcd->SetupStageCallback = HAL_PCD_SetupStageCallback; + break; + + case HAL_PCD_RESET_CB_ID : + hpcd->ResetCallback = HAL_PCD_ResetCallback; + break; + + case HAL_PCD_SUSPEND_CB_ID : + hpcd->SuspendCallback = HAL_PCD_SuspendCallback; + break; + + case HAL_PCD_RESUME_CB_ID : + hpcd->ResumeCallback = HAL_PCD_ResumeCallback; + break; + + case HAL_PCD_CONNECT_CB_ID : + hpcd->ConnectCallback = HAL_PCD_ConnectCallback; + break; + + case HAL_PCD_DISCONNECT_CB_ID : + hpcd->DisconnectCallback = HAL_PCD_DisconnectCallback; + break; + + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hpcd->State == HAL_PCD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_PCD_MSPINIT_CB_ID : + hpcd->MspInitCallback = HAL_PCD_MspInit; + break; + + case HAL_PCD_MSPDEINIT_CB_ID : + hpcd->MspDeInitCallback = HAL_PCD_MspDeInit; + break; + + default : + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + return status; +} + +/** + * @brief Register USB PCD Data OUT Stage Callback + * To be used instead of the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data OUT Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataOutStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data OUT Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataOutStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataOutStageCallback = HAL_PCD_DataOutStageCallback; /* Legacy weak DataOutStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Data IN Stage Callback + * To be used instead of the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Data IN Stage Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, + pPCD_DataInStageCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Data IN Stage Callback + * USB PCD Data OUT Stage Callback is redirected to the weak HAL_PCD_DataInStageCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->DataInStageCallback = HAL_PCD_DataInStageCallback; /* Legacy weak DataInStageCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso OUT incomplete Callback + * To be used instead of the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoOutIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso OUT incomplete Callback + * USB PCD Iso OUT incomplete Callback is redirected + * to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOOUTIncompleteCallback = HAL_PCD_ISOOUTIncompleteCallback; /* Legacy weak ISOOUTIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD Iso IN incomplete Callback + * To be used instead of the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD Iso IN incomplete Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, + pPCD_IsoInIncpltCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD Iso IN incomplete Callback + * USB PCD Iso IN incomplete Callback is redirected + * to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->ISOINIncompleteCallback = HAL_PCD_ISOINIncompleteCallback; /* Legacy weak ISOINIncompleteCallback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD BCD Callback + * To be used instead of the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD BCD Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD BCD Callback + * USB BCD Callback is redirected to the weak HAL_PCDEx_BCD_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->BCDCallback = HAL_PCDEx_BCD_Callback; /* Legacy weak HAL_PCDEx_BCD_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Register USB PCD LPM Callback + * To be used instead of the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @param pCallback pointer to the USB PCD LPM Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = pCallback; + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} + +/** + * @brief Unregister the USB PCD LPM Callback + * USB LPM Callback is redirected to the weak HAL_PCDEx_LPM_Callback() predefined callback + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hpcd); + + if (hpcd->State == HAL_PCD_STATE_READY) + { + hpcd->LPMCallback = HAL_PCDEx_LPM_Callback; /* Legacy weak HAL_PCDEx_LPM_Callback */ + } + else + { + /* Update the error code */ + hpcd->ErrorCode |= HAL_PCD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hpcd); + + return status; +} +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + + if (((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) && + (hpcd->Init.battery_charging_enable == 1U)) + { + /* Enable USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + + __HAL_PCD_ENABLE(hpcd); + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Stop the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); + + if (((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) && + (hpcd->Init.battery_charging_enable == 1U)) + { + /* Disable USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Handles PCD interrupt request. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + USB_OTG_EPTypeDef *ep; + uint32_t i; + uint32_t ep_intr; + uint32_t epint; + uint32_t epnum; + uint32_t fifoemptymsk; + uint32_t RegVal; + + /* ensure that we are in device mode */ + if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) + { + /* avoid spurious interrupt */ + if (__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) + { + return; + } + + /* store current frame number */ + hpcd->FrameNumber = (USBx_DEVICE->DSTS & USB_OTG_DSTS_FNSOF_Msk) >> USB_OTG_DSTS_FNSOF_Pos; + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) + { + /* incorrect mode, acknowledge the interrupt */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); + } + + /* Handle RxQLevel Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) + { + USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + + RegVal = USBx->GRXSTSP; + + ep = &hpcd->OUT_ep[RegVal & USB_OTG_GRXSTSP_EPNUM]; + + if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) + { + if ((RegVal & USB_OTG_GRXSTSP_BCNT) != 0U) + { + (void)USB_ReadPacket(USBx, ep->xfer_buff, + (uint16_t)((RegVal & USB_OTG_GRXSTSP_BCNT) >> 4)); + + ep->xfer_buff += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + } + } + else if (((RegVal & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) + { + (void)USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8U); + ep->xfer_count += (RegVal & USB_OTG_GRXSTSP_BCNT) >> 4; + } + else + { + /* ... */ + } + + USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) + { + epnum = 0U; + + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) + { + epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); + (void)PCD_EP_OutXfrComplete_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); + /* Class B setup phase done for previous decoded setup */ + (void)PCD_EP_OutSetupPacket_int(hpcd, epnum); + } + + if ((epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); + } + + /* Clear OUT Endpoint disable interrupt */ + if ((epint & USB_OTG_DOEPINT_EPDISD) == USB_OTG_DOEPINT_EPDISD) + { + if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == USB_OTG_GINTSTS_BOUTNAKEFF) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGONAK; + } + + ep = &hpcd->OUT_ep[epnum]; + + if (ep->is_iso_incomplete == 1U) + { + ep->is_iso_incomplete = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOOUTIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_EPDISD); + } + + /* Clear Status Phase Received interrupt */ + if ((epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + + /* Clear OUT NAK interrupt */ + if ((epint & USB_OTG_DOEPINT_NAK) == USB_OTG_DOEPINT_NAK) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_NAK); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) + { + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); + + epnum = 0U; + + while (ep_intr != 0U) + { + if ((ep_intr & 0x1U) != 0U) /* In ITR */ + { + epint = USB_ReadDevInEPInterrupt(hpcd->Instance, (uint8_t)epnum); + + if ((epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); + + if (hpcd->Init.dma_enable == 1U) + { + hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket; + + /* this is ZLP, so prepare EP0 for next setup */ + if ((epnum == 0U) && (hpcd->IN_ep[epnum].xfer_len == 0U)) + { + /* prepare to rx more setup packets */ + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataInStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataInStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + if ((epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); + } + if ((epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); + } + if ((epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); + } + if ((epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) + { + (void)USB_FlushTxFifo(USBx, epnum); + + ep = &hpcd->IN_ep[epnum]; + + if (ep->is_iso_incomplete == 1U) + { + ep->is_iso_incomplete = 0U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_ISOINIncompleteCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); + } + if ((epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) + { + (void)PCD_WriteEmptyTxFifo(hpcd, epnum); + } + } + epnum++; + ep_intr >>= 1U; + } + } + + /* Handle Resume Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) + { + /* Clear the Remote Wake-up Signaling */ + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + + if (hpcd->LPM_State == LPM_L1) + { + hpcd->LPM_State = LPM_L0; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L0_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResumeCallback(hpcd); +#else + HAL_PCD_ResumeCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); + } + + /* Handle Suspend Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) + { + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); + } + + /* Handle LPM Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT); + + if (hpcd->LPM_State == LPM_L0) + { + hpcd->LPM_State = LPM_L1; + hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >> 2U; + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->LPMCallback(hpcd, PCD_LPM_L1_ACTIVE); +#else + HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SuspendCallback(hpcd); +#else + HAL_PCD_SuspendCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + /* Handle Reset Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) + { + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + (void)USB_FlushTxFifo(hpcd->Instance, 0x10U); + + for (i = 0U; i < hpcd->Init.dev_endpoints; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_INEP(i)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + USBx_OUTEP(i)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + } + USBx_DEVICE->DAINTMSK |= 0x10001U; + + if (hpcd->Init.use_dedicated_ep1 != 0U) + { + USBx_DEVICE->DOUTEP1MSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM; + + USBx_DEVICE->DINEP1MSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + else + { + USBx_DEVICE->DOEPMSK |= USB_OTG_DOEPMSK_STUPM | + USB_OTG_DOEPMSK_XFRCM | + USB_OTG_DOEPMSK_EPDM | + USB_OTG_DOEPMSK_OTEPSPRM | + USB_OTG_DOEPMSK_NAKM; + + USBx_DEVICE->DIEPMSK |= USB_OTG_DIEPMSK_TOM | + USB_OTG_DIEPMSK_XFRCM | + USB_OTG_DIEPMSK_EPDM; + } + + /* Set Default Address to 0 */ + USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; + + /* setup EP0 to receive SETUP packets */ + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, + (uint8_t *)hpcd->Setup); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); + } + + /* Handle Enumeration done Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) + { + (void)USB_ActivateSetup(hpcd->Instance); + hpcd->Init.speed = USB_GetDevSpeed(hpcd->Instance); + + /* Set USB Turnaround time */ + (void)USB_SetTurnaroundTime(hpcd->Instance, + HAL_RCC_GetHCLKFreq(), + (uint8_t)hpcd->Init.speed); + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ResetCallback(hpcd); +#else + HAL_PCD_ResetCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); + } + + /* Handle SOF Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SOFCallback(hpcd); +#else + HAL_PCD_SOFCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); + } + + /* Handle Global OUT NAK effective Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_BOUTNAKEFF)) + { + USBx->GINTMSK &= ~USB_OTG_GINTMSK_GONAKEFFM; + + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + if (hpcd->OUT_ep[epnum].is_iso_incomplete == 1U) + { + /* Abort current transaction and disable the EP */ + (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)epnum); + } + } + } + + /* Handle Incomplete ISO IN Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) + { + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + RegVal = USBx_INEP(epnum)->DIEPCTL; + + if ((hpcd->IN_ep[epnum].type == EP_TYPE_ISOC) && + ((RegVal & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)) + { + hpcd->IN_ep[epnum].is_iso_incomplete = 1U; + + /* Abort current transaction and disable the EP */ + (void)HAL_PCD_EP_Abort(hpcd, (uint8_t)(epnum | 0x80U)); + } + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); + } + + /* Handle Incomplete ISO OUT Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) + { + for (epnum = 1U; epnum < hpcd->Init.dev_endpoints; epnum++) + { + RegVal = USBx_OUTEP(epnum)->DOEPCTL; + + if ((hpcd->OUT_ep[epnum].type == EP_TYPE_ISOC) && + ((RegVal & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) && + ((RegVal & (0x1U << 16)) == (hpcd->FrameNumber & 0x1U))) + { + hpcd->OUT_ep[epnum].is_iso_incomplete = 1U; + + USBx->GINTMSK |= USB_OTG_GINTMSK_GONAKEFFM; + + if ((USBx->GINTSTS & USB_OTG_GINTSTS_BOUTNAKEFF) == 0U) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SGONAK; + break; + } + } + } + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); + } + + /* Handle Connection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->ConnectCallback(hpcd); +#else + HAL_PCD_ConnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); + } + + /* Handle Disconnection event Interrupt */ + if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) + { + RegVal = hpcd->Instance->GOTGINT; + + if ((RegVal & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DisconnectCallback(hpcd); +#else + HAL_PCD_DisconnectCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + hpcd->Instance->GOTGINT |= RegVal; + } + } +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @brief Data OUT stage callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callback + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callback. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval None + */ +__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callback. + * @param hpcd PCD handle + * @retval None + */ +__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + + if (((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) && + (hpcd->Init.battery_charging_enable == 1U)) + { + /* Enable USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + (void)USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Disconnect the USB device. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + __HAL_LOCK(hpcd); + (void)USB_DevDisconnect(hpcd->Instance); + + if (((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) != 0U) && + (hpcd->Init.battery_charging_enable == 1U)) + { + /* Disable USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set the USB Device address. + * @param hpcd PCD handle + * @param address new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + (void)USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} +/** + * @brief Open and configure an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param ep_mps endpoint max packet size + * @param ep_type endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, + uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->num = ep_addr & EP_ADDR_MSK; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + if (ep->is_in != 0U) + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + } + + /* Set initial data PID. */ + if (ep_type == EP_TYPE_BULK) + { + ep->data_pid_start = 0U; + } + + __HAL_LOCK(hpcd); + (void)USB_ActivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return ret; +} + +/** + * @brief Deactivate an endpoint. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if ((ep_addr & 0x80U) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_DeactivateEndpoint(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the reception buffer + * @param len amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + if (hpcd->Init.dma_enable == 1U) + { + ep->dma_addr = (uint32_t)pBuf; + } + + (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval Data Size + */ +uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef const *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & EP_ADDR_MSK].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @param pBuf pointer to the transmission buffer + * @param len amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep; + + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0U; + ep->is_in = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + if (hpcd->Init.dma_enable == 1U) + { + ep->dma_addr = (uint32_t)pBuf; + } + + (void)USB_EPStartXfer(hpcd->Instance, ep, (uint8_t)hpcd->Init.dma_enable); + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & EP_ADDR_MSK) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + ep->is_in = 0U; + } + + ep->is_stall = 1U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + + (void)USB_EPSetStall(hpcd->Instance, ep); + + if ((ep_addr & EP_ADDR_MSK) == 0U) + { + (void)USB_EP0_OutStart(hpcd->Instance, (uint8_t)hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep; + + if (((uint32_t)ep_addr & 0x0FU) > hpcd->Init.dev_endpoints) + { + return HAL_ERROR; + } + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 1U; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + ep->is_in = 0U; + } + + ep->is_stall = 0U; + ep->num = ep_addr & EP_ADDR_MSK; + + __HAL_LOCK(hpcd); + (void)USB_EPClearStall(hpcd->Instance, ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Abort an USB EP transaction. + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Abort(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + HAL_StatusTypeDef ret; + PCD_EPTypeDef *ep; + + if ((0x80U & ep_addr) == 0x80U) + { + ep = &hpcd->IN_ep[ep_addr & EP_ADDR_MSK]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & EP_ADDR_MSK]; + } + + /* Stop Xfer */ + ret = USB_EPStopXfer(hpcd->Instance, ep); + + return ret; +} + +/** + * @brief Flush an endpoint + * @param hpcd PCD handle + * @param ep_addr endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x80U) == 0x80U) + { + (void)USB_FlushTxFifo(hpcd->Instance, (uint32_t)ep_addr & EP_ADDR_MSK); + } + else + { + (void)USB_FlushRxFifo(hpcd->Instance); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Activate remote wakeup signalling + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief De-activate remote wakeup signalling. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return (USB_DeActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD handle state. + * @param hpcd PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef const *hpcd) +{ + return hpcd->State; +} + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Set the USB Device high speed test mode. + * @param hpcd PCD handle + * @param testmode USB Device high speed test mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetTestMode(const PCD_HandleTypeDef *hpcd, uint8_t testmode) +{ + const USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + + switch (testmode) + { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + USBx_DEVICE->DCTL |= (uint32_t)testmode << 4; + break; + + default: + break; + } + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup PCD_Private_Functions + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Check FIFO for the next packet to be loaded. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + USB_OTG_EPTypeDef *ep; + uint32_t len; + uint32_t len32b; + uint32_t fifoemptymsk; + + ep = &hpcd->IN_ep[epnum]; + + if (ep->xfer_count > ep->xfer_len) + { + return HAL_ERROR; + } + + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + + len32b = (len + 3U) / 4U; + + while (((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) >= len32b) && + (ep->xfer_count < ep->xfer_len) && (ep->xfer_len != 0U)) + { + /* Write the FIFO */ + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + len32b = (len + 3U) / 4U; + + (void)USB_WritePacket(USBx, ep->xfer_buff, (uint8_t)epnum, (uint16_t)len, + (uint8_t)hpcd->Init.dma_enable); + + ep->xfer_buff += len; + ep->xfer_count += len; + } + + if (ep->xfer_len <= ep->xfer_count) + { + fifoemptymsk = (uint32_t)(0x1UL << (epnum & EP_ADDR_MSK)); + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT transfer complete interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutXfrComplete_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_EPTypeDef *ep; + const USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO const uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if (hpcd->Init.dma_enable == 1U) + { + if ((DoepintReg & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) /* Class C */ + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + } + else if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) /* Class E */ + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + else if ((DoepintReg & (USB_OTG_DOEPINT_STUP | USB_OTG_DOEPINT_OTEPSPR)) == 0U) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + ep = &hpcd->OUT_ep[epnum]; + + /* out data packet received over EP */ + ep->xfer_count = ep->xfer_size - (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ); + + if (epnum == 0U) + { + if (ep->xfer_len == 0U) + { + /* this is ZLP, so prepare EP0 for next setup */ + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + else + { + ep->xfer_buff += ep->xfer_count; + } + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else + { + /* ... */ + } + } + else + { + if (gSNPSiD == USB_OTG_CORE_ID_310A) + { + /* StupPktRcvd = 1 this is a setup packet */ + if ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + else + { + if ((DoepintReg & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + else + { + if ((epnum == 0U) && (hpcd->OUT_ep[epnum].xfer_len == 0U)) + { + /* this is ZLP, so prepare EP0 for next setup */ + (void)USB_EP0_OutStart(hpcd->Instance, 0U, (uint8_t *)hpcd->Setup); + } + +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->DataOutStageCallback(hpcd, (uint8_t)epnum); +#else + HAL_PCD_DataOutStageCallback(hpcd, (uint8_t)epnum); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + return HAL_OK; +} + + +/** + * @brief process EP OUT setup packet received interrupt. + * @param hpcd PCD handle + * @param epnum endpoint number + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_OutSetupPacket_int(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + const USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO const uint32_t *)(&USBx->CID + 0x1U); + uint32_t DoepintReg = USBx_OUTEP(epnum)->DOEPINT; + + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && + ((DoepintReg & USB_OTG_DOEPINT_STPKTRX) == USB_OTG_DOEPINT_STPKTRX)) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STPKTRX); + } + + /* Inform the upper layer that a setup packet is available */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->SetupStageCallback(hpcd); +#else + HAL_PCD_SetupStageCallback(hpcd); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + + if ((gSNPSiD > USB_OTG_CORE_ID_300A) && (hpcd->Init.dma_enable == 1U)) + { + (void)USB_EP0_OutStart(hpcd->Instance, 1U, (uint8_t *)hpcd->Setup); + } + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd_ex.c new file mode 100644 index 0000000..1d4bfe9 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pcd_ex.c @@ -0,0 +1,341 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pcd_ex.c + * @author MCD Application Team + * @brief PCD Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO configuration + +@endverbatim + * @{ + */ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/** + * @brief Set Tx FIFO + * @param hpcd PCD handle + * @param fifo The number of Tx fifo + * @param size Fifo size + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) +{ + uint8_t i; + uint32_t Tx_Offset; + + /* TXn min size = 16 words. (n : Transmit FIFO index) + When a TxFIFO is not used, the Configuration should be as follows: + case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txm can use the space allocated for Txn. + case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txn should be configured with the minimum space of 16 words + The FIFO is used optimally when used TxFIFOs are allocated in the top + of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. + When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ + + Tx_Offset = hpcd->Instance->GRXFSIZ; + + if (fifo == 0U) + { + hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset; + } + else + { + Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; + for (i = 0U; i < (fifo - 1U); i++) + { + Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16); + } + + /* Multiply Tx_Size by 2 to get higher performance */ + hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset; + } + + return HAL_OK; +} + +/** + * @brief Set Rx FIFO + * @param hpcd PCD handle + * @param size Size of Rx fifo + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) +{ + hpcd->Instance->GRXFSIZ = size; + + return HAL_OK; +} + +/** + * @brief Activate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 1U; + hpcd->LPM_State = LPM_L0; + USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM; + USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); + + return HAL_OK; +} + +/** + * @brief Deactivate LPM feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + hpcd->lpm_active = 0U; + USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM; + USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL); + + return HAL_OK; +} + + +/** + * @brief Handle BatteryCharging Process. + * @param hpcd PCD handle + * @retval HAL status + */ +void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t tickstart = HAL_GetTick(); + + /* Enable DCD : Data Contact Detect */ + USBx->GCCFG |= USB_OTG_GCCFG_DCDEN; + + /* Wait for Min DCD Timeout */ + HAL_Delay(300U); + + /* Check Detect flag */ + if ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == USB_OTG_GCCFG_DCDET) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + + /* Primary detection: checks if connected to Standard Downstream Port + (without charging capability) */ + USBx->GCCFG &= ~USB_OTG_GCCFG_DCDEN; + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_PDEN; + HAL_Delay(50U); + + if ((USBx->GCCFG & USB_OTG_GCCFG_PDET) == 0U) + { + /* Case of Standard Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* start secondary detection to check connection to Charging Downstream + Port or Dedicated Charging Port */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + HAL_Delay(50U); + USBx->GCCFG |= USB_OTG_GCCFG_SDEN; + HAL_Delay(50U); + + if ((USBx->GCCFG & USB_OTG_GCCFG_SDET) == USB_OTG_GCCFG_SDET) + { + /* case Dedicated Charging Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { + /* case Charging Downstream Port */ +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + } + + /* Battery Charging capability discovery finished */ + (void)HAL_PCDEx_DeActivateBCD(hpcd); + + /* Check for the Timeout, else start USB Device */ + if ((HAL_GetTick() - tickstart) > 1000U) + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_ERROR); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U) + hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#else + HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED); +#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Activate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + + /* Power Down USB transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + + /* Enable Battery charging */ + USBx->GCCFG |= USB_OTG_GCCFG_BCDEN; + + hpcd->battery_charging_active = 1U; + + return HAL_OK; +} + +/** + * @brief Deactivate BatteryCharging feature. + * @param hpcd PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + + USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN); + USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN); + + /* Disable Battery charging */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); + + hpcd->battery_charging_active = 0U; + + return HAL_OK; +} + +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @brief Send LPM message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_LPM_Callback could be implemented in the user file + */ +} + +/** + * @brief Send BatteryCharging message to user layer callback. + * @param hpcd PCD handle + * @param msg LPM message + * @retval HAL status + */ +__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(msg); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCDEx_BCD_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* HAL_PCD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c new file mode 100644 index 0000000..4621780 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c @@ -0,0 +1,876 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization and de-initialization functions. + * + Peripheral Control functions. + * + Interrupt Handling functions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### PWR peripheral overview ##### + ============================================================================== + [..] + (#) The Power control (PWR) provides an overview of the supply architecture + for the different power domains and of the supply configuration + controller. + In the H7 family, the number of power domains is different between + device lines. This difference is due to characteristics of each device. + + (#) Domain architecture overview for the different H7 lines: + (+) Dual core lines are STM32H745, STM32H747, STM32H755 and STM32H757. + These devices have 3 power domains (D1, D2 and D3). + The domain D1 contains a CPU (Cortex-M7), a Flash memory and some + peripherals. The D2 domain contains peripherals and a CPU + (Cortex-M4). The D3 domain contains the system control, I/O logic + and low-power peripherals. + (+) STM32H72x, STM32H73x, STM32H742, STM32H743, STM32H750 and STM32H753 + devices have 3 power domains (D1, D2 and D3). + The domain D1 contains a CPU (Cortex-M7), a Flash memory and some + peripherals. The D2 domain contains peripherals. The D3 domains + contains the system control, I/O logic and low-power peripherals. + (+) STM32H7Axxx and STM32H7Bxxx devices have 2 power domains (CD and SRD). + The core domain (CD) contains a CPU (Cortex-M7), a Flash + memory and peripherals. The SmartRun domain contains the system + control, I/O logic and low-power peripherals. + + (#) Every entity have low power mode as described below : + (#) The CPU low power modes are : + (+) CPU CRUN. + (+) CPU CSLEEP. + (+) CPU CSTOP. + (#) The domain low power modes are : + (+) DRUN. + (+) DSTOP. + (+) DSTANDBY. + (#) The SYSTEM low power modes are : + (+) RUN* : The Run* mode is entered after a POR reset and a wakeup from + Standby. In Run* mode, the performance is limited and the + system supply configuration shall be programmed. The system + enters Run mode only when the ACTVOSRDY bit in PWR control + status register 1 (PWR_CSR1) is set to 1. + (+) RUN. + (+) STOP. + (+) STANDBY. + + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Power management peripheral is active by default at startup level in + STM32h7xx lines. + + (#) Call HAL_PWR_EnableBkUpAccess() and HAL_PWR_DisableBkUpAccess() functions + to enable/disable access to the backup domain (RTC registers, RTC backup + data registers and backup SRAM). + + (#) Call HAL_PWR_ConfigPVD() after setting parameters to be configured (event + mode and voltage threshold) in order to set up the Power Voltage Detector, + then use HAL_PWR_EnablePVD() and HAL_PWR_DisablePVD() functions to start + and stop the PVD detection. + (+) PVD level could be one of the following values : + (++) 1V95 + (++) 2V1 + (++) 2V25 + (++) 2V4 + (++) 2V55 + (++) 2V7 + (++) 2V85 + (++) External voltage level + + (#) Call HAL_PWR_EnableWakeUpPin() and HAL_PWR_DisableWakeUpPin() functions + with the right parameter to configure the wake up pin polarity (Low or + High) and to enable and disable it. + + (#) Call HAL_PWR_EnterSLEEPMode() function to enter the current Core in SLEEP + mode. Wake-up from SLEEP mode could be following to an event or an + interrupt according to low power mode intrinsic request called (__WFI() + or __WFE()). + Please ensure to clear all CPU pending events by calling + HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx + in SLEEP mode with __WFE() entry. + + (#) Call HAL_PWR_EnterSTOPMode() function to enter the whole system to Stop 0 + mode for single core devices. For dual core devices, this API will enter + the domain (containing Cortex-Mx that executing this function) in DSTOP + mode. According to the used parameter, user could select the regulator to + be kept actif in low power mode and wake-up event type. + Please ensure to clear all CPU pending events by calling + HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx + in CSTOP mode with __WFE() entry. + + (#) Call HAL_PWR_EnterSTANDBYMode() function to enter the whole system in + STANDBY mode for single core devices. For dual core devices, this API + will enter the domain (containing Cortex-Mx that executing this function) + in DSTANDBY mode. + + (#) Call HAL_PWR_EnableSleepOnExit() and HAL_PWR_DisableSleepOnExit() APIs to + enable and disable the Cortex-Mx re-entring in SLEEP mode after an + interruption handling is over. + + (#) Call HAL_PWR_EnableSEVOnPend() and HAL_PWR_DisableSEVOnPend() functions + to configure the Cortex-Mx to wake-up after any pending event / interrupt + even if it's disabled or has insufficient priority to cause exception + entry. + + (#) Call HAL_PWR_PVD_IRQHandler() function to handle the PWR PVD interrupt + request. + + *** PWR HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in PWR HAL driver. + + (+) __HAL_PWR_VOLTAGESCALING_CONFIG() : Configure the main internal + regulator output voltage. + (+) __HAL_PWR_GET_FLAG() : Get the PWR pending flags. + (+) __HAL_PWR_CLEAR_FLAG() : Clear the PWR pending flags. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @addtogroup PWR_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#if !defined (DUAL_CORE) +#define PVD_MODE_IT (0x00010000U) +#define PVD_MODE_EVT (0x00020000U) +#endif /* !defined (DUAL_CORE) */ + +#define PVD_RISING_EDGE (0x00000001U) +#define PVD_FALLING_EDGE (0x00000002U) +#define PVD_RISING_FALLING_EDGE (0x00000003U) +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions + * @brief Initialization and De-Initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and De-Initialization Functions ##### + =============================================================================== + [..] + This section provides functions allowing to deinitialize power peripheral. + + [..] + After system reset, the backup domain (RTC registers, RTC backup data + registers and backup SRAM) is protected against possible unwanted write + accesses. + The HAL_PWR_EnableBkUpAccess() function enables the access to the backup + domain. + The HAL_PWR_DisableBkUpAccess() function disables the access to the backup + domain. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset + * values. + * @note This functionality is not available in this product. + * The prototype is kept just to maintain compatibility with other + * products. + * @retval None. + */ +void HAL_PWR_DeInit (void) +{ +} + +/** + * @brief Enable access to the backup domain (RTC registers, RTC backup data + * registers and backup SRAM). + * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None. + */ +void HAL_PWR_EnableBkUpAccess (void) +{ + /* Enable access to RTC and backup registers */ + SET_BIT (PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain (RTC registers, RTC backup data + * registers and backup SRAM). + * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None. + */ +void HAL_PWR_DisableBkUpAccess (void) +{ + /* Disable access to RTC and backup registers */ + CLEAR_BIT (PWR->CR1, PWR_CR1_DBP); +} +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control Functions + * @brief Power Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control Functions ##### + =============================================================================== + [..] + This section provides functions allowing to control power peripheral. + + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[7:0] bits in the PWR_CR1 + register). + + (+) A PVDO flag is available to indicate if VDD is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line 16 to generate an interrupt if enabled. + It is configurable through __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. + + (+) The PVD is stopped in STANDBY mode. + + *** Wake-up pin configuration *** + ================================= + [..] + (+) Wake-up pin is used to wake up the system from STANDBY mode. + The pin pull is configurable through the WKUPEPR register to be in + No-pull, Pull-up and Pull-down. + The pin polarity is configurable through the WKUPEPR register to be + active on rising or falling edges. + + (+) There are up to six Wake-up pin in the STM32H7 devices family. + + *** Low Power modes configuration *** + ===================================== + [..] + The device present 3 principles low-power modes features: + (+) SLEEP mode : Cortex-Mx is stopped and all PWR domains are remaining + active (Powered and Clocked). + + (+) STOP mode : Cortex-Mx is stopped, clocks are stopped and the + regulator is running. The Main regulator or the LP + regulator could be selected. + + (+) STANDBY mode : All PWR domains enter DSTANDBY mode and the VCORE + supply regulator is powered off. + + *** SLEEP mode *** + ================== + [..] + (+) Entry: + The SLEEP mode is entered by using the HAL_PWR_EnterSLEEPMode(Regulator, + SLEEPEntry) function. + + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction. + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction. + + -@@- The Regulator parameter is not used for the STM32H7 family + and is kept as parameter just to maintain compatibility with the + lower power families (STM32L). + + (+) Exit: + Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from SLEEP mode. + + *** STOP mode *** + ================= + [..] + In system STOP mode, all clocks in the 1.2V domain are stopped, the PLL, + the HSI, and the HSE RC oscillators are disabled. Internal SRAM and + register contents are preserved. + The voltage regulator can be configured either in normal or low-power mode. + To minimize the consumption in STOP mode, FLASH can be powered off before + entering the STOP mode using the HAL_PWREx_EnableFlashPowerDown() function. + It can be switched on again by software after exiting the STOP mode using + the HAL_PWREx_DisableFlashPowerDown() function. + + (+) Entry: + The STOP mode is entered using the HAL_PWR_EnterSTOPMode(Regulator, + STOPEntry) function with: + + (++) Regulator: + (+++) PWR_MAINREGULATOR_ON: Main regulator ON. + (+++) PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON. + + (++) STOPEntry: + (+++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction. + (+++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction. + + (+) Exit: + Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + + *** STANDBY mode *** + ==================== + [..] + (+) + The system STANDBY mode allows to achieve the lowest power consumption. + It is based on the Cortex-Mx deep SLEEP mode, with the voltage regulator + disabled. The system is consequently powered off. The PLL, the HSI + oscillator and the HSE oscillator are also switched off. SRAM and register + contents are lost except for the RTC registers, RTC backup registers, + backup SRAM and standby circuitry. + + [..] + The voltage regulator is OFF. + + (++) Entry: + (+++) The STANDBY mode is entered using the HAL_PWR_EnterSTANDBYMode() + function. + + (++) Exit: + (+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), + RTC wakeup, tamper event, time stamp event, external reset in NRST + pin, IWDG reset. + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an + RTC Wakeup event, a tamper event or a time-stamp event, without + depending on an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the STOP and STANDBY modes + + (++) To wake up from the STOP mode with an RTC alarm event, it is + necessary to configure the RTC to generate the RTC alarm using the + HAL_RTC_SetAlarm_IT() function. + + (++) To wake up from the STOP mode with an RTC Tamper or time stamp event, + it is necessary to configure the RTC to detect the tamper or time + stamp event using the HAL_RTCEx_SetTimeStamp_IT() or + HAL_RTCEx_SetTamper_IT() functions. + + (++) To wake up from the STOP mode with an RTC WakeUp event, it is + necessary to configure the RTC to generate the RTC WakeUp event + using the HAL_RTCEx_SetWakeUpTimer_IT() function. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the event mode and the voltage threshold detected by the + * Programmable Voltage Detector(PVD). + * @param sConfigPVD : Pointer to an PWR_PVDTypeDef structure that contains + * the configuration information for the PVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @note For dual core devices, please ensure to configure the EXTI lines for + * the different Cortex-Mx through PWR_Exported_Macro provided by this + * driver. All combination are allowed: wake up only Cortex-M7, wake up + * only Cortex-M4 or wake up Cortex-M7 and Cortex-M4. + * @retval None. + */ +void HAL_PWR_ConfigPVD (PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the PVD configuration parameter */ + if (sConfigPVD == NULL) + { + return; + } + + /* Check the parameters */ + assert_param (IS_PWR_PVD_LEVEL (sConfigPVD->PVDLevel)); + assert_param (IS_PWR_PVD_MODE (sConfigPVD->Mode)); + + /* Set PLS[7:5] bits according to PVDLevel value */ + MODIFY_REG (PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel); + + /* Clear previous config */ +#if !defined (DUAL_CORE) + __HAL_PWR_PVD_EXTI_DISABLE_EVENT (); + __HAL_PWR_PVD_EXTI_DISABLE_IT (); +#endif /* !defined (DUAL_CORE) */ + + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE (); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE (); + +#if !defined (DUAL_CORE) + /* Interrupt mode configuration */ + if ((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT (); + } + + /* Event mode configuration */ + if ((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT (); + } +#endif /* !defined (DUAL_CORE) */ + + /* Rising edge configuration */ + if ((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE (); + } + + /* Falling edge configuration */ + if ((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE (); + } +} + +/** + * @brief Enable the Programmable Voltage Detector (PVD). + * @retval None. + */ +void HAL_PWR_EnablePVD (void) +{ + /* Enable the power voltage detector */ + SET_BIT (PWR->CR1, PWR_CR1_PVDEN); +} + +/** + * @brief Disable the Programmable Voltage Detector (PVD). + * @retval None. + */ +void HAL_PWR_DisablePVD (void) +{ + /* Disable the power voltage detector */ + CLEAR_BIT (PWR->CR1, PWR_CR1_PVDEN); +} + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity : Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values, which + * sets the default (rising edge): + * @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, + * PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6. + * or one of the following values where the user can explicitly states + * the enabled pin and the chosen polarity: + * @arg PWR_WAKEUP_PIN1_HIGH, PWR_WAKEUP_PIN1_LOW, + * PWR_WAKEUP_PIN2_HIGH, PWR_WAKEUP_PIN2_LOW, + * PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, + * PWR_WAKEUP_PIN4_HIGH, PWR_WAKEUP_PIN4_LOW, + * PWR_WAKEUP_PIN5_HIGH, PWR_WAKEUP_PIN5_LOW, + * PWR_WAKEUP_PIN6_HIGH, PWR_WAKEUP_PIN6_LOW. + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @note The PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, PWR_WAKEUP_PIN5_HIGH + * and PWR_WAKEUP_PIN5_LOW are available only for devices that includes + * GPIOI port. + * @retval None. + */ +void HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity) +{ + /* Check the parameters */ + assert_param (IS_PWR_WAKEUP_PIN (WakeUpPinPolarity)); + + /* + Enable and Specify the Wake-Up pin polarity and the pull configuration + for the event detection (rising or falling edge). + */ + MODIFY_REG (PWR->WKUPEPR, PWR_EWUP_MASK, WakeUpPinPolarity); +} + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx : Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, + * PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6, + * PWR_WAKEUP_PIN1_HIGH, PWR_WAKEUP_PIN1_LOW, + * PWR_WAKEUP_PIN2_HIGH, PWR_WAKEUP_PIN2_LOW, + * PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, + * PWR_WAKEUP_PIN4_HIGH, PWR_WAKEUP_PIN4_LOW, + * PWR_WAKEUP_PIN5_HIGH, PWR_WAKEUP_PIN5_LOW, + * PWR_WAKEUP_PIN6_HIGH, PWR_WAKEUP_PIN6_LOW. + * @note The PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, PWR_WAKEUP_PIN5_HIGH + * and PWR_WAKEUP_PIN5_LOW are available only for devices that includes + * GPIOI port. + * @retval None. + */ +void HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx) +{ + /* Check the parameters */ + assert_param (IS_PWR_WAKEUP_PIN (WakeUpPinx)); + + /* Disable the wake up pin selected */ + CLEAR_BIT (PWR->WKUPEPR, (PWR_WKUPEPR_WKUPEN & WakeUpPinx)); +} + +/** + * @brief Enter the current core in SLEEP mode (CSLEEP). + * @param Regulator : Specifies the regulator state in SLEEP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON : SLEEP mode with regulator ON. + * @arg PWR_LOWPOWERREGULATOR_ON : SLEEP mode with low power + * regulator ON. + * @note This parameter is not used for the STM32H7 family and is kept as + * parameter just to maintain compatibility with the lower power + * families. + * @param SLEEPEntry : Specifies if SLEEP mode is entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI : enter SLEEP mode with WFI instruction. + * @arg PWR_SLEEPENTRY_WFE : enter SLEEP mode with WFE instruction. + * @note Ensure to clear pending events before calling this API through + * HAL_PWREx_ClearPendingEvent() when the SLEEP entry is WFE. + * @retval None. + */ +void HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR (Regulator)); + assert_param (IS_PWR_SLEEP_ENTRY (SLEEPEntry)); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Regulator); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Select SLEEP mode entry */ + if (SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } +} + +/** + * @brief Enter STOP mode. + * @note For single core devices, this API will enter the system in STOP mode + * with all domains in DSTOP, if RUN_D3/RUN_SRD bit in CPUCR register is + * cleared. + * For dual core devices, this API will enter the domain (containing + * Cortex-Mx that executing this function) in DSTOP mode. If all + * Cortex-Mx domains are in DSTOP and RUN_D3 bit in CPUCR register is + * cleared, all the system will enter in STOP mode. + * @param Regulator : Specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON. + * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power + * regulator ON. + * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction. + * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction. + * @note In System STOP mode, all I/O pins keep the same state as in Run mode. + * @note When exiting System STOP mode by issuing an interrupt or a wakeup + * event, the HSI RC oscillator is selected as default system wakeup + * clock. + * @note In System STOP mode, when the voltage regulator operates in low + * power mode, an additional startup delay is incurred when the system + * is waking up. By keeping the internal regulator ON during STOP mode, + * the consumption is higher although the startup time is reduced. + * @retval None. + */ +void HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR (Regulator)); + assert_param (IS_PWR_STOP_ENTRY (STOPEntry)); + + /* Select the regulator state in STOP mode */ + MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator); + + /* Configure the PWR mode for the different Domains */ +#if defined (DUAL_CORE) + /* Check CPU ID */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + /* Keep DSTOP mode when Cortex-M7 enters DEEP-SLEEP */ + CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3)); + } + else + { + /* Keep DSTOP mode when Cortex-M4 enters DEEP-SLEEP */ + CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D2 | PWR_CPUCR_PDDS_D3)); + } +#else /* Single core devices */ + /* Keep DSTOP mode when Cortex-M7 enter in DEEP-SLEEP */ + CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3)); + +#if defined (PWR_CPUCR_PDDS_D2) + /* Keep DSTOP mode when Cortex-M7 enter in DEEP-SLEEP */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2); +#endif /* PWR_CPUCR_PDDS_D2 */ +#endif /* defined (DUAL_CORE) */ + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB (); + __ISB (); + + /* Select STOP mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } + + /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Enter STANDBY mode. + * @note For single core devices, this API will enter the system in STANDBY + * mode with all domains in DSTANDBY, if RUN_D3/RUN_SRD bit in CPUCR + * register is cleared. + * For dual core devices, this API will enter the domain (containing + * Cortex-Mx that executing this function) in DSTANDBY mode. If all + * Cortex-Mx domains are in DSTANDBY and RUN_D3 bit in CPUCR register + * is cleared, all the system will enter in STANDBY mode. + * @note The system enters Standby mode only when all domains are in DSTANDBY. + * @note When the System exit STANDBY mode by issuing an interrupt or a + * wakeup event, the HSI RC oscillator is selected as system clock. + * @note It is recommended to disable all regulators before entring STANDBY + * mode for power consumption saving purpose. + * @retval None. + */ +void HAL_PWR_EnterSTANDBYMode (void) +{ + /* Configure the PWR mode for the different Domains */ +#if defined (DUAL_CORE) + /* Check CPU ID */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + /* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */ + SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3)); + SET_BIT (PWR->CPU2CR, (PWR_CPU2CR_PDDS_D1 | PWR_CPU2CR_PDDS_D3)); + } + else + { + /* Enter DSTANDBY mode when Cortex-M4 enters DEEP-SLEEP */ + SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D2 | PWR_CPUCR_PDDS_D3)); + SET_BIT (PWR->CPU2CR, (PWR_CPU2CR_PDDS_D2 | PWR_CPU2CR_PDDS_D3)); + } +#else /* Single core devices */ + /* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */ + SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3)); + +#if defined (PWR_CPUCR_PDDS_D2) + /* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2); +#endif /* PWR_CPUCR_PDDS_D2 */ +#endif /* defined (DUAL_CORE) */ + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB (); + __ISB (); + + /* This option is used to ensure that store operations are completed */ +#if defined (__CC_ARM) + __force_stores(); +#endif /* defined (__CC_ARM) */ + + /* Request Wait For Interrupt */ + __WFI (); +} + +/** + * @brief Indicate Sleep-On-Exit feature when returning from Handler mode to + * Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run + * only on interruptions handling. + * @retval None. + */ +void HAL_PWR_EnableSleepOnExit (void) +{ + /* Set SLEEPONEXIT bit of Cortex-Mx System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Disable Sleep-On-Exit feature when returning from Handler mode to + * Thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit (void) +{ + /* Clear SLEEPONEXIT bit of Cortex-Mx System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Enable CORTEX SEVONPEND feature. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, any + * pending event / interrupt even if it's disabled or has insufficient + * priority to cause exception entry wakes up the Cortex-Mx. + * @retval None. + */ +void HAL_PWR_EnableSEVOnPend (void) +{ + /* Set SEVONPEND bit of Cortex-Mx System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief Disable CORTEX SEVONPEND feature. + * @note Resets SEVONPEND bit of SCR register. When this bit is reset, only + * enabled pending causes exception entry wakes up the Cortex-Mx. + * @retval None. + */ +void HAL_PWR_DisableSEVOnPend (void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group3 Interrupt Handling Functions + * @brief Interrupt Handling functions + * +@verbatim + =============================================================================== + ##### Interrupt Handling Functions ##### + =============================================================================== + [..] + This section provides functions allowing to handle the PVD pending + interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_AVD_IRQHandler(). + * @retval None. + */ +void HAL_PWR_PVD_IRQHandler (void) +{ +#if defined (DUAL_CORE) + /* Check Cortex-Mx ID */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + /* Check PWR EXTI D1 flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U) + { + /* Clear PWR EXTI D1 pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG (); + + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + } + } + else + { + /* Check PWR EXTI D2 flag */ + if (__HAL_PWR_PVD_EXTID2_GET_FLAG () != 0U) + { + /* Clear PWR EXTI D2 pending bit */ + __HAL_PWR_PVD_EXTID2_CLEAR_FLAG (); + + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + } + } +#else /* Single core devices */ + /* PVD EXTI line interrupt detected */ + if (__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U) + { + /* Clear PWR EXTI pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG (); + + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + } +#endif /* defined (DUAL_CORE) */ +} + +/** + * @brief PWR PVD interrupt callback. + * @retval None. + */ +__weak void HAL_PWR_PVDCallback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWR_PVDCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c new file mode 100644 index 0000000..4b1a86e --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c @@ -0,0 +1,2154 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of PWR extension peripheral: + * + Peripheral Extended features functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Call HAL_PWREx_ConfigSupply() function to configure the regulator supply + with the following different setups according to hardware (support SMPS): + (+) PWR_DIRECT_SMPS_SUPPLY + (+) PWR_SMPS_1V8_SUPPLIES_LDO + (+) PWR_SMPS_2V5_SUPPLIES_LDO + (+) PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + (+) PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO + (+) PWR_SMPS_1V8_SUPPLIES_EXT + (+) PWR_SMPS_2V5_SUPPLIES_EXT + (+) PWR_LDO_SUPPLY + (+) PWR_EXTERNAL_SOURCE_SUPPLY + + (#) Call HAL_PWREx_GetSupplyConfig() function to get the current supply setup. + + (#) Call HAL_PWREx_ControlVoltageScaling() function to configure the main + internal regulator output voltage. The voltage scaling could be one of + the following scales : + (+) PWR_REGULATOR_VOLTAGE_SCALE0 + (+) PWR_REGULATOR_VOLTAGE_SCALE1 + (+) PWR_REGULATOR_VOLTAGE_SCALE2 + (+) PWR_REGULATOR_VOLTAGE_SCALE3 + + (#) Call HAL_PWREx_GetVoltageRange() function to get the current output + voltage applied to the main regulator. + + (#) Call HAL_PWREx_ControlStopModeVoltageScaling() function to configure the + main internal regulator output voltage in STOP mode. The voltage scaling + in STOP mode could be one of the following scales : + (+) PWR_REGULATOR_SVOS_SCALE3 + (+) PWR_REGULATOR_SVOS_SCALE4 + (+) PWR_REGULATOR_SVOS_SCALE5 + + (#) Call HAL_PWREx_GetStopModeVoltageRange() function to get the current + output voltage applied to the main regulator in STOP mode. + + (#) Call HAL_PWREx_EnterSTOP2Mode() function to enter the system in STOP mode + with core domain in D2STOP mode. This API is used only for STM32H7Axxx + and STM32H7Bxxx devices. + Please ensure to clear all CPU pending events by calling + HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx + in DEEP-SLEEP mode with __WFE() entry. + + (#) Call HAL_PWREx_EnterSTOPMode() function to enter the selected domain in + DSTOP mode. Call this API with all available power domains to enter the + system in STOP mode. + Please ensure to clear all CPU pending events by calling + HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx + in DEEP-SLEEP mode with __WFE() entry. + + (#) Call HAL_PWREx_ClearPendingEvent() function always before entring the + Cortex-Mx in any low power mode (SLEEP/DEEP-SLEEP) using WFE entry. + + (#) Call HAL_PWREx_EnterSTANDBYMode() function to enter the selected domain + in DSTANDBY mode. Call this API with all available power domains to enter + the system in STANDBY mode. + + (#) Call HAL_PWREx_ConfigD3Domain() function to setup the D3/SRD domain state + (RUN/STOP) when the system enter to low power mode. + + (#) Call HAL_PWREx_ClearDomainFlags() function to clear the CPU flags for the + selected power domain. This API is used only for dual core devices. + + (#) Call HAL_PWREx_HoldCore() and HAL_PWREx_ReleaseCore() functions to hold + and release the selected CPU and and their domain peripherals when + exiting STOP mode. These APIs are used only for dual core devices. + + (#) Call HAL_PWREx_EnableFlashPowerDown() and + HAL_PWREx_DisableFlashPowerDown() functions to enable and disable the + Flash Power Down in STOP mode. + + (#) Call HAL_PWREx_EnableMemoryShutOff() and + HAL_PWREx_DisableMemoryShutOff() functions to enable and disable the + memory block shut-off in DStop or DStop2. These APIs are used only for + STM32H7Axxx and STM32H7Bxxx lines. + + (#) Call HAL_PWREx_EnableWakeUpPin() and HAL_PWREx_DisableWakeUpPin() + functions to enable and disable the Wake-up pin functionality for + the selected pin. + + (#) Call HAL_PWREx_GetWakeupFlag() and HAL_PWREx_ClearWakeupFlag() + functions to manage wake-up flag for the selected pin. + + (#) Call HAL_PWREx_WAKEUP_PIN_IRQHandler() function to handle all wake-up + pins interrupts. + + (#) Call HAL_PWREx_EnableBkUpReg() and HAL_PWREx_DisableBkUpReg() functions + to enable and disable the backup domain regulator. + + (#) Call HAL_PWREx_EnableUSBReg(), HAL_PWREx_DisableUSBReg(), + HAL_PWREx_EnableUSBVoltageDetector() and + HAL_PWREx_DisableUSBVoltageDetector() functions to manage USB power + regulation functionalities. + + (#) Call HAL_PWREx_EnableBatteryCharging() and + HAL_PWREx_DisableBatteryCharging() functions to enable and disable the + battery charging feature with the selected resistor. + + (#) Call HAL_PWREx_EnableAnalogBooster() and + HAL_PWREx_DisableAnalogBooster() functions to enable and disable the + AVD boost feature when the VDD supply voltage is below 2V7. + + (#) Call HAL_PWREx_EnableMonitoring() and HAL_PWREx_DisableMonitoring() + functions to enable and disable the VBAT and Temperature monitoring. + When VBAT and Temperature monitoring feature is enables, use + HAL_PWREx_GetTemperatureLevel() and HAL_PWREx_GetVBATLevel() to get + respectively the Temperature level and VBAT level. + + (#) Call HAL_PWREx_GetMMCVoltage() and HAL_PWREx_DisableMonitoring() + function to get VDDMMC voltage level. This API is used only for + STM32H7Axxx and STM32H7Bxxx lines + + (#) Call HAL_PWREx_ConfigAVD() after setting parameter to be configured + (event mode and voltage threshold) in order to set up the Analog Voltage + Detector then use HAL_PWREx_EnableAVD() and HAL_PWREx_DisableAVD() + functions to start and stop the AVD detection. + (+) AVD level could be one of the following values : + (++) 1V7 + (++) 2V1 + (++) 2V5 + (++) 2V8 + + (#) Call HAL_PWREx_PVD_AVD_IRQHandler() function to handle the PWR PVD and + AVD interrupt request. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @addtogroup PWREx_Private_Constants + * @{ + */ + +/** @defgroup PWREx_AVD_Mode_Mask PWR Extended AVD Mode Mask + * @{ + */ +#define AVD_MODE_IT (0x00010000U) +#define AVD_MODE_EVT (0x00020000U) +#define AVD_RISING_EDGE (0x00000001U) +#define AVD_FALLING_EDGE (0x00000002U) +#define AVD_RISING_FALLING_EDGE (0x00000003U) +/** + * @} + */ + +/** @defgroup PWREx_REG_SET_TIMEOUT PWR Extended Flag Setting Time Out Value + * @{ + */ +#define PWR_FLAG_SETTING_DELAY (1000U) +/** + * @} + */ + +/** @defgroup PWREx_WakeUp_Pins_Offsets PWREx Wake-Up Pins masks and offsets + * @{ + */ +/* Wake-Up Pins EXTI register mask */ +#if defined (EXTI_IMR2_IM57) +#define PWR_EXTI_WAKEUP_PINS_MASK (EXTI_IMR2_IM55 | EXTI_IMR2_IM56 |\ + EXTI_IMR2_IM57 | EXTI_IMR2_IM58 |\ + EXTI_IMR2_IM59 | EXTI_IMR2_IM60) +#else +#define PWR_EXTI_WAKEUP_PINS_MASK (EXTI_IMR2_IM55 | EXTI_IMR2_IM56 |\ + EXTI_IMR2_IM58 | EXTI_IMR2_IM60) +#endif /* defined (EXTI_IMR2_IM57) */ + +/* Wake-Up Pins PWR Pin Pull shift offsets */ +#define PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET (2U) +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Power Supply Control Functions + * @brief Power supply control functions + * +@verbatim + =============================================================================== + ##### Power supply control functions ##### + =============================================================================== + [..] + (#) When the system is powered on, the POR monitors VDD supply. Once VDD is + above the POR threshold level, the voltage regulator is enabled in the + default supply configuration: + (+) The Voltage converter output level is set at 1V0 in accordance with + the VOS3 level configured in PWR (D3/SRD) domain control register + (PWR_D3CR/PWR_SRDCR). + (+) The system is kept in reset mode as long as VCORE is not ok. + (+) Once VCORE is ok, the system is taken out of reset and the HSI + oscillator is enabled. + (+) Once the oscillator is stable, the system is initialized: Flash memory + and option bytes are loaded and the CPU starts in Run* mode. + (+) The software shall then initialize the system including supply + configuration programming using the HAL_PWREx_ConfigSupply(). + (+) Once the supply configuration has been configured, the + HAL_PWREx_ConfigSupply() function checks the ACTVOSRDY bit in PWR + control status register 1 (PWR_CSR1) to guarantee a valid voltage + levels: + (++) As long as ACTVOSRDY indicates that voltage levels are invalid, the + system is in limited Run* mode, write accesses to the RAMs are not + permitted and VOS shall not be changed. + (++) Once ACTVOSRDY indicates that voltage levels are valid, the system + is in normal Run mode, write accesses to RAMs are allowed and VOS + can be changed. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the system Power Supply. + * @param SupplySource : Specifies the Power Supply source to set after a + * system startup. + * This parameter can be one of the following values : + * @arg PWR_DIRECT_SMPS_SUPPLY : The SMPS supplies the Vcore Power + * Domains. The LDO is Bypassed. + * @arg PWR_SMPS_1V8_SUPPLIES_LDO : The SMPS 1.8V output supplies + * the LDO. The Vcore Power Domains + * are supplied from the LDO. + * @arg PWR_SMPS_2V5_SUPPLIES_LDO : The SMPS 2.5V output supplies + * the LDO. The Vcore Power Domains + * are supplied from the LDO. + * @arg PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO : The SMPS 1.8V output + * supplies external + * circuits and the LDO. + * The Vcore Power Domains + * are supplied from the + * LDO. + * @arg PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO : The SMPS 2.5V output + * supplies external + * circuits and the LDO. + * The Vcore Power Domains + * are supplied from the + * LDO. + * @arg PWR_SMPS_1V8_SUPPLIES_EXT : The SMPS 1.8V output supplies + * external circuits. The LDO is + * Bypassed. The Vcore Power + * Domains are supplied from + * external source. + * @arg PWR_SMPS_2V5_SUPPLIES_EXT : The SMPS 2.5V output supplies + * external circuits. The LDO is + * Bypassed. The Vcore Power + * Domains are supplied from + * external source. + * @arg PWR_LDO_SUPPLY : The LDO regulator supplies the Vcore Power + * Domains. The SMPS regulator is Bypassed. + * @arg PWR_EXTERNAL_SOURCE_SUPPLY : The SMPS and the LDO are + * Bypassed. The Vcore Power + * Domains are supplied from + * external source. + * @note The PWR_LDO_SUPPLY and PWR_EXTERNAL_SOURCE_SUPPLY are used by all + * H7 lines. + * The PWR_DIRECT_SMPS_SUPPLY, PWR_SMPS_1V8_SUPPLIES_LDO, + * PWR_SMPS_2V5_SUPPLIES_LDO, PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO, + * PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO, PWR_SMPS_1V8_SUPPLIES_EXT and + * PWR_SMPS_2V5_SUPPLIES_EXT are used only for lines that supports SMPS + * regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param (IS_PWR_SUPPLY (SupplySource)); + + /* Check if supply source was configured */ +#if defined (PWR_FLAG_SCUEN) + if (__HAL_PWR_GET_FLAG (PWR_FLAG_SCUEN) == 0U) +#else + if ((PWR->CR3 & (PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS)) != (PWR_CR3_SMPSEN | PWR_CR3_LDOEN)) +#endif /* defined (PWR_FLAG_SCUEN) */ + { + /* Check supply configuration */ + if ((PWR->CR3 & PWR_SUPPLY_CONFIG_MASK) != SupplySource) + { + /* Supply configuration update locked, can't apply a new supply config */ + return HAL_ERROR; + } + else + { + /* Supply configuration update locked, but new supply configuration + matches with old supply configuration : nothing to do + */ + return HAL_OK; + } + } + + /* Set the power supply configuration */ + MODIFY_REG (PWR->CR3, PWR_SUPPLY_CONFIG_MASK, SupplySource); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till voltage level flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + +#if defined (SMPS) + /* When the SMPS supplies external circuits verify that SDEXTRDY flag is set */ + if ((SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) || + (SupplySource == PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) || + (SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT) || + (SupplySource == PWR_SMPS_2V5_SUPPLIES_EXT)) + { + /* Get the current tick number */ + tickstart = HAL_GetTick (); + + /* Wait till SMPS external supply ready flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_SMPSEXTRDY) == 0U) + { + if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + } +#endif /* defined (SMPS) */ + + return HAL_OK; +} + +/** + * @brief Get the power supply configuration. + * @retval The supply configuration. + */ +uint32_t HAL_PWREx_GetSupplyConfig (void) +{ + return (PWR->CR3 & PWR_SUPPLY_CONFIG_MASK); +} + +/** + * @brief Configure the main internal regulator output voltage. + * @param VoltageScaling : Specifies the regulator output voltage to achieve + * a tradeoff between performance and power + * consumption. + * This parameter can be one of the following values : + * @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output + * Scale 0 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output + * range 1 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output + * range 2 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output + * range 3 mode. + * @note For STM32H74x and STM32H75x lines, configuring Voltage Scale 0 is + * only possible when Vcore is supplied from LDO (Low DropOut). The + * SYSCFG Clock must be enabled through __HAL_RCC_SYSCFG_CLK_ENABLE() + * macro before configuring Voltage Scale 0. + * To enter low power mode , and if current regulator voltage is + * Voltage Scale 0 then first switch to Voltage Scale 1 before entering + * low power mode. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR_VOLTAGE (VoltageScaling)); + + /* Get the voltage scaling */ + if ((PWR->CSR1 & PWR_CSR1_ACTVOS) == VoltageScaling) + { + /* Old and new voltage scaling configuration match : nothing to do */ + return HAL_OK; + } + +#if defined (PWR_SRDCR_VOS) + /* Set the voltage range */ + MODIFY_REG (PWR->SRDCR, PWR_SRDCR_VOS, VoltageScaling); +#else +#if defined(SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */ + if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE0) + { + if ((PWR->CR3 & PWR_CR3_LDOEN) == PWR_CR3_LDOEN) + { + /* Set the voltage range */ + MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till voltage level flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + /* Enable the PWR overdrive */ + SET_BIT (SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); + } + else + { + /* The voltage scale 0 is only possible when LDO regulator is enabled */ + return HAL_ERROR; + } + } + else + { + if ((PWR->CSR1 & PWR_CSR1_ACTVOS) == PWR_REGULATOR_VOLTAGE_SCALE1) + { + if ((SYSCFG->PWRCR & SYSCFG_PWRCR_ODEN) != 0U) + { + /* Disable the PWR overdrive */ + CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till voltage level flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + } + } + + /* Set the voltage range */ + MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, VoltageScaling); + } +#else /* STM32H72xxx and STM32H73xxx lines */ + /* Set the voltage range */ + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, VoltageScaling); +#endif /* defined (SYSCFG_PWRCR_ODEN) */ +#endif /* defined (PWR_SRDCR_VOS) */ + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till voltage level flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Get the main internal regulator output voltage. Reflecting the last + * VOS value applied to the PMU. + * @retval The current applied VOS selection. + */ +uint32_t HAL_PWREx_GetVoltageRange (void) +{ + /* Get the active voltage scaling */ + return (PWR->CSR1 & PWR_CSR1_ACTVOS); +} + +/** + * @brief Configure the main internal regulator output voltage in STOP mode. + * @param VoltageScaling : Specifies the regulator output voltage when the + * system enters Stop mode to achieve a tradeoff between performance + * and power consumption. + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_SVOS_SCALE3 : Regulator voltage output range + * 3 mode. + * @arg PWR_REGULATOR_SVOS_SCALE4 : Regulator voltage output range + * 4 mode. + * @arg PWR_REGULATOR_SVOS_SCALE5 : Regulator voltage output range + * 5 mode. + * @note The Stop mode voltage scaling for SVOS4 and SVOS5 sets the voltage + * regulator in Low-power (LP) mode to further reduce power consumption. + * When preselecting SVOS3, the use of the voltage regulator low-power + * mode (LP) can be selected by LPDS register bit. + * @note The selected SVOS4 and SVOS5 levels add an additional startup delay + * when exiting from system Stop mode. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param (IS_PWR_STOP_MODE_REGULATOR_VOLTAGE (VoltageScaling)); + + /* Return the stop mode voltage range */ + MODIFY_REG (PWR->CR1, PWR_CR1_SVOS, VoltageScaling); + + return HAL_OK; +} + +/** + * @brief Get the main internal regulator output voltage in STOP mode. + * @retval The actual applied VOS selection. + */ +uint32_t HAL_PWREx_GetStopModeVoltageRange (void) +{ + /* Return the stop voltage scaling */ + return (PWR->CR1 & PWR_CR1_SVOS); +} +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group2 Low Power Control Functions + * @brief Low power control functions + * +@verbatim + =============================================================================== + ##### Low power control functions ##### + =============================================================================== + + *** Domains Low Power modes configuration *** + ============================================= + [..] + This section provides the extended low power mode control APIs. + The system presents 3 principles domains (D1, D2 and D3) that can be + operated in low-power modes (DSTOP or DSTANDBY mode): + + (+) DSTOP mode to enters a domain to STOP mode: + (++) D1 domain and/or D2 domain enters DSTOP mode only when the CPU + subsystem is in CSTOP mode and has allocated peripheral in the + domain. + In DSTOP mode the domain bus matrix clock is stopped. + (++) The system enters STOP mode using one of the following scenarios: + (+++) D1 domain enters DSTANDBY mode (powered off) and D2, D3 domains + enter DSTOP mode. + (+++) D2 domain enters DSTANDBY mode (powered off) and D1, D3 domains + enter DSTOP mode. + (+++) D3 domain enters DSTANDBY mode (powered off) and D1, D2 domains + enter DSTOP mode. + (+++) D1 and D2 domains enter DSTANDBY mode (powered off) and D3 domain + enters DSTOP mode. + (+++) D1 and D3 domains enter DSTANDBY mode (powered off) and D2 domain + enters DSTOP mode. + (+++) D2 and D3 domains enter DSTANDBY mode (powered off) and D1 domain + enters DSTOP mode. + (+++) D1, D2 and D3 domains enter DSTOP mode. + (++) When the system enters STOP mode, the clocks are stopped and the + regulator is running in main or low power mode. + (++) D3 domain can be kept in Run mode regardless of the CPU status when + enter STOP mode by using HAL_PWREx_ConfigD3Domain(D3State) function. + + (+) DSTANDBY mode to enters a domain to STANDBY mode: + (++) The DSTANDBY mode is entered when the PDDS_Dn bit in PWR CPU control + register (PWR_CPUCR) for the Dn domain selects Standby mode. + (++) The system enters STANDBY mode only when D1, D2 and D3 domains enter + DSTANDBY mode. Consequently the VCORE supply regulator is powered + off. + + *** DSTOP mode *** + ================== + [..] + In DStop mode the domain bus matrix clock is stopped. + The Flash memory can enter low-power Stop mode when it is enabled through + FLPS in PWR_CR1 register. This allows a trade-off between domain DStop + restart time and low power consumption. + [..] + In DStop mode domain peripherals using the LSI or LSE clock and + peripherals having a kernel clock request are still able to operate. + [..] + Before entering DSTOP mode it is recommended to call SCB_CleanDCache + function in order to clean the D-Cache and guarantee the data integrity + for the SRAM memories. + + (+) Entry: + The DSTOP mode is entered using the HAL_PWREx_EnterSTOPMode(Regulator, + STOPEntry, Domain) function with: + (++) Regulator: + (+++) PWR_MAINREGULATOR_ON : Main regulator ON. + (+++) PWR_LOWPOWERREGULATOR_ON : Low Power regulator ON. + (++) STOPEntry: + (+++) PWR_STOPENTRY_WFI : enter STOP mode with WFI instruction + (+++) PWR_STOPENTRY_WFE : enter STOP mode with WFE instruction + (++) Domain: + (+++) PWR_D1_DOMAIN : Enters D1/CD domain to DSTOP mode. + (+++) PWR_D2_DOMAIN : Enters D2 domain to DSTOP mode. + (+++) PWR_D3_DOMAIN : Enters D3/SRD domain to DSTOP mode. + + (+) Exit: + Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + + *** DSTANDBY mode *** + ===================== + [..] + In DStandby mode: + (+) The domain bus matrix clock is stopped. + (+) The domain is powered down and the domain RAM and register contents + are lost. + [..] + Before entering DSTANDBY mode it is recommended to call SCB_CleanDCache + function in order to clean the D-Cache and guarantee the data integrity + for the SRAM memories. + + (+) Entry: + The DSTANDBY mode is entered using the HAL_PWREx_EnterSTANDBYMode + (Domain) function with: + (++) Domain: + (+++) PWR_D1_DOMAIN : Enters D1/CD domain to DSTANDBY mode. + (+++) PWR_D2_DOMAIN : Enters D2 domain to DSTANDBY mode. + (+++) PWR_D3_DOMAIN : Enters D3/SRD domain to DSTANDBY mode. + + (+) Exit: + WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC + wakeup, tamper event, time stamp event, external reset in NRST pin, + IWDG reset. + + *** Keep D3/SRD in RUN mode *** + =============================== + [..] + D3/SRD domain can be kept in Run mode regardless of the CPU status when + entering STOP mode by using HAL_PWREx_ConfigD3Domain(D3State) function + with : + (+) D3State: + (++) PWR_D3_DOMAIN_STOP : D3/SDR domain follows the CPU sub-system + mode. + (++) PWR_D3_DOMAIN_RUN : D3/SRD domain remains in Run mode regardless + of CPU subsystem mode. + + *** FLASH Power Down configuration **** + ======================================= + [..] + By setting the FLPS bit in the PWR_CR1 register using the + HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters + power down mode when the device enters STOP mode. When the Flash memory is + in power down mode, an additional startup delay is incurred when waking up + from STOP mode. + + *** Wakeup Pins configuration **** + =================================== + [..] + Wakeup pins allow the system to exit from Standby mode. The configuration + of wakeup pins is done with the HAL_PWREx_EnableWakeUpPin(sPinParams) + function with: + (+) sPinParams: structure to enable and configure a wakeup pin: + (++) WakeUpPin: Wakeup pin to be enabled. + (++) PinPolarity: Wakeup pin polarity (rising or falling edge). + (++) PinPull: Wakeup pin pull (no pull, pull-up or pull-down). + [..] + The wakeup pins are internally connected to the EXTI lines [55-60] to + generate an interrupt if enabled. The EXTI lines configuration is done by + the HAL_EXTI_Dx_EventInputConfig() functions defined in the stm32h7xxhal.c + file. + [..] + When a wakeup pin event is received the HAL_PWREx_WAKEUP_PIN_IRQHandler is + called and the appropriate flag is set in the PWR_WKUPFR register. Then in + the HAL_PWREx_WAKEUP_PIN_IRQHandler function the wakeup pin flag will be + cleared and the appropriate user callback will be called. The user can add + his own code by customization of function pointer HAL_PWREx_WKUPx_Callback. + +@endverbatim + * @{ + */ + +#if defined (PWR_CPUCR_RETDS_CD) +/** + * @brief Enter the system to STOP mode with main domain in DSTOP2. + * @note In STOP mode, the domain bus matrix clock is stalled. + * @note In STOP mode, memories and registers are maintained and peripherals + * in CPU domain are no longer operational. + * @note All clocks in the VCORE domain are stopped, the PLL, the HSI and the + * HSE oscillators are disabled. Only Peripherals that have wakeup + * capability can switch on the HSI to receive a frame, and switch off + * the HSI after receiving the frame if it is not a wakeup frame. In + * this case the HSI clock is propagated only to the peripheral + * requesting it. + * @note When exiting STOP mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in + * RCC_CFGR register is set. + * @param Regulator : Specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON. + * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power + * regulator ON. + * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction. + * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction. + * @retval None. + */ +void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR (Regulator)); + assert_param (IS_PWR_STOP_ENTRY (STOPEntry)); + + /* Select the regulator state in Stop mode */ + MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator); + + /* Go to DStop2 mode (deep retention) when CPU domain enters Deepsleep */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_RETDS_CD); + + /* Keep DSTOP mode when SmartRun domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_SRD); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __ISB (); + __DSB (); + + /* Select Stop mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } + + /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} +#endif /* defined (PWR_CPUCR_RETDS_CD) */ + +/** + * @brief Enter a Domain to DSTOP mode. + * @note This API gives flexibility to manage independently each domain STOP + * mode. For dual core lines, this API should be executed with the + * corresponding Cortex-Mx to enter domain to DSTOP mode. When it is + * executed by all available Cortex-Mx, the system enter to STOP mode. + * For single core lines, calling this API with domain parameter set to + * PWR_D1_DOMAIN (D1/CD), the whole system will enter in STOP mode + * independently of PWR_CPUCR_PDDS_Dx bits values if RUN_D3 bit in the + * CPUCR_RUN_D3 is cleared. + * @note In DStop mode the domain bus matrix clock is stopped. + * @note The system D3/SRD domain enter Stop mode only when the CPU subsystem + * is in CStop mode, the EXTI wakeup sources are inactive and at least + * one PDDS_Dn bit in PWR CPU control register (PWR_CPUCR) for + * any domain request Stop. + * @note Before entering DSTOP mode it is recommended to call SCB_CleanDCache + * function in order to clean the D-Cache and guarantee the data + * integrity for the SRAM memories. + * @note In System Stop mode, the domain peripherals that use the LSI or LSE + * clock, and the peripherals that have a kernel clock request to + * select HSI or CSI as source, are still able to operate. + * @param Regulator : Specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON. + * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power + * regulator ON. + * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction. + * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction. + * @param Domain : Specifies the Domain to enter in DSTOP mode. + * This parameter can be one of the following values: + * @arg PWR_D1_DOMAIN : Enter D1/CD Domain to DSTOP mode. + * @arg PWR_D2_DOMAIN : Enter D2 Domain to DSTOP mode. + * @arg PWR_D3_DOMAIN : Enter D3/SRD Domain to DSTOP mode. + * @retval None. + */ +void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain) +{ + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR (Regulator)); + assert_param (IS_PWR_STOP_ENTRY (STOPEntry)); + assert_param (IS_PWR_DOMAIN (Domain)); + + /* Select the regulator state in Stop mode */ + MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator); + + /* Select the domain Power Down DeepSleep */ + if (Domain == PWR_D1_DOMAIN) + { +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () != CM7_CPUID) + { + /* + When the domain selected and the cortex-mx don't match, entering stop + mode will not be performed + */ + return; + } +#endif /* defined (DUAL_CORE) */ + + /* Keep DSTOP mode when D1/CD domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D1); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB (); + __ISB (); + + /* Select Stop mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } + + /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + } +#if defined (PWR_CPUCR_PDDS_D2) + else if (Domain == PWR_D2_DOMAIN) + { +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () != CM4_CPUID) + { + /* + When the domain selected and the cortex-mx don't match, entering stop + mode will not be performed + */ + return; + } + + /* Keep DSTOP mode when D2 domain enters Deepsleep */ + CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D2); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB (); + __ISB (); + + /* Select Stop mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } + + /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +#else + /* Keep DSTOP mode when D2 domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2); +#endif /* defined (DUAL_CORE) */ + } +#endif /* defined (PWR_CPUCR_PDDS_D2) */ + else + { +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + /* Keep DSTOP mode when D3 domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3); + } + else + { + /* Keep DSTOP mode when D3 domain enters Deepsleep */ + CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D3); + } +#else + /* Keep DSTOP mode when D3/SRD domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3); +#endif /* defined (DUAL_CORE) */ + } +} + +/** + * @brief Clear pending event. + * @note This API clears the pending event in order to enter a given CPU + * to CSLEEP or CSTOP. It should be called just before APIs performing + * enter low power mode using Wait For Event request. + * @note Cortex-M7 must be in CRUN mode when calling this API by Cortex-M4. + * @retval None. + */ +void HAL_PWREx_ClearPendingEvent (void) +{ +#if defined (DUAL_CORE) + /* Check the current Core */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + __WFE (); + } + else + { + __SEV (); + __WFE (); + } +#else + __WFE (); +#endif /* defined (DUAL_CORE) */ +} + +/** + * @brief Enter a Domain to DSTANDBY mode. + * @note This API gives flexibility to manage independently each domain + * STANDBY mode. For dual core lines, this API should be executed with + * the corresponding Cortex-Mx to enter domain to DSTANDBY mode. When + * it is executed by all available Cortex-Mx, the system enter STANDBY + * mode. + * For single core lines, calling this API with D1/SRD the selected + * domain will enter the whole system in STOP if PWR_CPUCR_PDDS_D3 = 0 + * and enter the whole system in STANDBY if PWR_CPUCR_PDDS_D3 = 1. + * @note The DStandby mode is entered when all PDDS_Dn bits in PWR_CPUCR for + * the Dn domain select Standby mode. When the system enters Standby + * mode, the voltage regulator is disabled. + * @note When D2 or D3 domain is in DStandby mode and the CPU sets the + * domain PDDS_Dn bit to select Stop mode, the domain remains in + * DStandby mode. The domain will only exit DStandby when the CPU + * allocates a peripheral in the domain. + * @note The system D3/SRD domain enters Standby mode only when the D1 and D2 + * domain are in DStandby. + * @note Before entering DSTANDBY mode it is recommended to call + * SCB_CleanDCache function in order to clean the D-Cache and guarantee + * the data integrity for the SRAM memories. + * @param Domain : Specifies the Domain to enter to STANDBY mode. + * This parameter can be one of the following values: + * @arg PWR_D1_DOMAIN: Enter D1/CD Domain to DSTANDBY mode. + * @arg PWR_D2_DOMAIN: Enter D2 Domain to DSTANDBY mode. + * @arg PWR_D3_DOMAIN: Enter D3/SRD Domain to DSTANDBY mode. + * @retval None + */ +void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain) +{ + /* Check the parameters */ + assert_param (IS_PWR_DOMAIN (Domain)); + + /* Select the domain Power Down DeepSleep */ + if (Domain == PWR_D1_DOMAIN) + { +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () != CM7_CPUID) + { + /* + When the domain selected and the cortex-mx don't match, entering + standby mode will not be performed + */ + return; + } +#endif /* defined (DUAL_CORE) */ + + /* Allow DSTANDBY mode when D1/CD domain enters Deepsleep */ + SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D1); + +#if defined (DUAL_CORE) + /* Allow DSTANDBY mode when D1/CD domain enters Deepsleep */ + SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D1); +#endif /*DUAL_CORE*/ + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* This option is used to ensure that store operations are completed */ +#if defined (__CC_ARM) + __force_stores (); +#endif /* defined (__CC_ARM) */ + + /* Request Wait For Interrupt */ + __WFI (); + } +#if defined (PWR_CPUCR_PDDS_D2) + else if (Domain == PWR_D2_DOMAIN) + { + /* Allow DSTANDBY mode when D2 domain enters Deepsleep */ + SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D2); + +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () != CM4_CPUID) + { + /* + When the domain selected and the cortex-mx don't match, entering + standby mode will not be performed + */ + return; + } + + /* Allow DSTANDBY mode when D2 domain enters Deepsleep */ + SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D2); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* This option is used to ensure that store operations are completed */ +#if defined (__CC_ARM) + __force_stores (); +#endif /* defined (__CC_ARM) */ + + /* Request Wait For Interrupt */ + __WFI (); +#endif /* defined (DUAL_CORE) */ + } +#endif /* defined (PWR_CPUCR_PDDS_D2) */ + else + { + /* Allow DSTANDBY mode when D3/SRD domain enters Deepsleep */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3); + +#if defined (DUAL_CORE) + /* Allow DSTANDBY mode when D3/SRD domain enters Deepsleep */ + SET_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D3); +#endif /* defined (DUAL_CORE) */ + } +} + +/** + * @brief Configure the D3/SRD Domain state when the System in low power mode. + * @param D3State : Specifies the D3/SRD state. + * This parameter can be one of the following values : + * @arg PWR_D3_DOMAIN_STOP : D3/SRD domain will follow the most deep + * CPU sub-system low power mode. + * @arg PWR_D3_DOMAIN_RUN : D3/SRD domain will stay in RUN mode + * regardless of the CPU sub-system low + * power mode. + * @retval None + */ +void HAL_PWREx_ConfigD3Domain (uint32_t D3State) +{ + /* Check the parameter */ + assert_param (IS_D3_STATE (D3State)); + + /* Keep D3/SRD in run mode */ + MODIFY_REG (PWR->CPUCR, PWR_CPUCR_RUN_D3, D3State); +} + +#if defined (DUAL_CORE) +/** + * @brief Clear HOLD2F, HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2 flags for a + * given domain. + * @param DomainFlags : Specifies the Domain flags to be cleared. + * This parameter can be one of the following values: + * @arg PWR_D1_DOMAIN_FLAGS : Clear D1 Domain flags. + * @arg PWR_D2_DOMAIN_FLAGS : Clear D2 Domain flags. + * @arg PWR_ALL_DOMAIN_FLAGS : Clear D1 and D2 Domain flags. + * @retval None. + */ +void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags) +{ + /* Check the parameter */ + assert_param (IS_PWR_DOMAIN_FLAG (DomainFlags)); + + /* D1 CPU flags */ + if (DomainFlags == PWR_D1_DOMAIN_FLAGS) + { + /* Clear D1 domain flags (HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2) */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_CSSF); + } + /* D2 CPU flags */ + else if (DomainFlags == PWR_D2_DOMAIN_FLAGS) + { + /* Clear D2 domain flags (HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2) */ + SET_BIT (PWR->CPU2CR, PWR_CPU2CR_CSSF); + } + else + { + /* Clear D1 domain flags (HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2) */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_CSSF); + /* Clear D2 domain flags (HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2) */ + SET_BIT (PWR->CPU2CR, PWR_CPU2CR_CSSF); + } +} + +/** + * @brief Hold the CPU and their domain peripherals when exiting STOP mode. + * @param CPU : Specifies the core to be held. + * This parameter can be one of the following values: + * @arg PWR_CORE_CPU1: Hold CPU1 and set CPU2 as master. + * @arg PWR_CORE_CPU2: Hold CPU2 and set CPU1 as master. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param (IS_PWR_CORE (CPU)); + + /* Check CPU index */ + if (CPU == PWR_CORE_CPU2) + { + /* If CPU1 is not held */ + if ((PWR->CPU2CR & PWR_CPU2CR_HOLD1) != PWR_CPU2CR_HOLD1) + { + /* Set HOLD2 bit */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_HOLD2); + } + else + { + status = HAL_ERROR; + } + } + else + { + /* If CPU2 is not held */ + if ((PWR->CPUCR & PWR_CPUCR_HOLD2) != PWR_CPUCR_HOLD2) + { + /* Set HOLD1 bit */ + SET_BIT (PWR->CPU2CR, PWR_CPU2CR_HOLD1); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Release the CPU and their domain peripherals after a wake-up from + * STOP mode. + * @param CPU: Specifies the core to be released. + * This parameter can be one of the following values: + * @arg PWR_CORE_CPU1: Release the CPU1 and their domain + * peripherals from holding. + * @arg PWR_CORE_CPU2: Release the CPU2 and their domain + * peripherals from holding. + * @retval None + */ +void HAL_PWREx_ReleaseCore (uint32_t CPU) +{ + /* Check the parameters */ + assert_param (IS_PWR_CORE (CPU)); + + /* Check CPU index */ + if (CPU == PWR_CORE_CPU2) + { + /* Reset HOLD2 bit */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_HOLD2); + } + else + { + /* Reset HOLD1 bit */ + CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_HOLD1); + } +} +#endif /* defined (DUAL_CORE) */ + + +/** + * @brief Enable the Flash Power Down in Stop mode. + * @note When Flash Power Down is enabled the Flash memory enters low-power + * mode when D1/SRD domain is in DStop mode. This feature allows to + * obtain the best trade-off between low-power consumption and restart + * time when exiting from DStop mode. + * @retval None. + */ +void HAL_PWREx_EnableFlashPowerDown (void) +{ + /* Enable the Flash Power Down */ + SET_BIT (PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Disable the Flash Power Down in Stop mode. + * @note When Flash Power Down is disabled the Flash memory is kept on + * normal mode when D1/SRD domain is in DStop mode. This feature allows + * to obtain the best trade-off between low-power consumption and + * restart time when exiting from DStop mode. + * @retval None. + */ +void HAL_PWREx_DisableFlashPowerDown (void) +{ + /* Disable the Flash Power Down */ + CLEAR_BIT (PWR->CR1, PWR_CR1_FLPS); +} + +#if defined (PWR_CR1_SRDRAMSO) +/** + * @brief Enable memory block shut-off in DStop or DStop2 modes + * @note In DStop or DStop2 mode, the content of the memory blocks is + * maintained. Further power optimization can be obtained by switching + * off some memory blocks. This optimization implies loss of the memory + * content. The user can select which memory is discarded during STOP + * mode by means of xxSO bits. + * @param MemoryBlock : Specifies the memory block to shut-off during DStop or + * DStop2 mode. + * This parameter can be one of the following values: + * @arg PWR_SRD_AHB_MEMORY_BLOCK : SmartRun domain AHB memory. + * @arg PWR_USB_FDCAN_MEMORY_BLOCK : High-speed interfaces USB and + * FDCAN memories. + * @arg PWR_GFXMMU_JPEG_MEMORY_BLOCK : GFXMMU and JPEG memories. + * @arg PWR_TCM_ECM_MEMORY_BLOCK : Instruction TCM and ETM memories. + * @arg PWR_RAM1_AHB_MEMORY_BLOCK : AHB RAM1 memory. + * @arg PWR_RAM2_AHB_MEMORY_BLOCK : AHB RAM2 memory. + * @arg PWR_RAM1_AXI_MEMORY_BLOCK : AXI RAM1 memory. + * @arg PWR_RAM2_AXI_MEMORY_BLOCK : AXI RAM2 memory. + * @arg PWR_RAM3_AXI_MEMORY_BLOCK : AXI RAM3 memory. + * @retval None. + */ +void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock) +{ + /* Check the parameter */ + assert_param (IS_PWR_MEMORY_BLOCK (MemoryBlock)); + + /* Enable memory block shut-off */ + SET_BIT (PWR->CR1, MemoryBlock); +} + +/** + * @brief Disable memory block shut-off in DStop or DStop2 modes + * @param MemoryBlock : Specifies the memory block to keep content during + * DStop or DStop2 mode. + * This parameter can be one of the following values: + * @arg PWR_SRD_AHB_MEMORY_BLOCK : SmartRun domain AHB memory. + * @arg PWR_USB_FDCAN_MEMORY_BLOCK : High-speed interfaces USB and + * FDCAN memories. + * @arg PWR_GFXMMU_JPEG_MEMORY_BLOCK : GFXMMU and JPEG memories. + * @arg PWR_TCM_ECM_MEMORY_BLOCK : Instruction TCM and ETM memories. + * @arg PWR_RAM1_AHB_MEMORY_BLOCK : AHB RAM1 memory. + * @arg PWR_RAM2_AHB_MEMORY_BLOCK : AHB RAM2 memory. + * @arg PWR_RAM1_AXI_MEMORY_BLOCK : AXI RAM1 memory. + * @arg PWR_RAM2_AXI_MEMORY_BLOCK : AXI RAM2 memory. + * @arg PWR_RAM3_AXI_MEMORY_BLOCK : AXI RAM3 memory. + * @retval None. + */ +void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock) +{ + /* Check the parameter */ + assert_param (IS_PWR_MEMORY_BLOCK (MemoryBlock)); + + /* Disable memory block shut-off */ + CLEAR_BIT (PWR->CR1, MemoryBlock); +} +#endif /* defined (PWR_CR1_SRDRAMSO) */ + +/** + * @brief Enable the Wake-up PINx functionality. + * @param sPinParams : Pointer to a PWREx_WakeupPinTypeDef structure that + * contains the configuration information for the wake-up + * Pin. + * @note For dual core devices, please ensure to configure the EXTI lines for + * the different Cortex-Mx. All combination are allowed: wake up only + * Cortex-M7, wake up only Cortex-M4 and wake up Cortex-M7 and + * Cortex-M4. + * @retval None. + */ +void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams) +{ + uint32_t pinConfig; + uint32_t regMask; + const uint32_t pullMask = PWR_WKUPEPR_WKUPPUPD1; + + /* Check the parameters */ + assert_param (IS_PWR_WAKEUP_PIN (sPinParams->WakeUpPin)); + assert_param (IS_PWR_WAKEUP_PIN_POLARITY (sPinParams->PinPolarity)); + assert_param (IS_PWR_WAKEUP_PIN_PULL (sPinParams->PinPull)); + + pinConfig = sPinParams->WakeUpPin | \ + (sPinParams->PinPolarity << ((POSITION_VAL(sPinParams->WakeUpPin) + PWR_WKUPEPR_WKUPP1_Pos) & 0x1FU)) | \ + (sPinParams->PinPull << (((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) + PWR_WKUPEPR_WKUPPUPD1_Pos) & 0x1FU)); + + regMask = sPinParams->WakeUpPin | \ + (PWR_WKUPEPR_WKUPP1 << (POSITION_VAL(sPinParams->WakeUpPin) & 0x1FU)) | \ + (pullMask << ((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) & 0x1FU)); + + /* Enable and Specify the Wake-Up pin polarity and the pull configuration + for the event detection (rising or falling edge) */ + MODIFY_REG (PWR->WKUPEPR, regMask, pinConfig); +#ifndef DUAL_CORE + /* Configure the Wakeup Pin EXTI Line */ + MODIFY_REG (EXTI->IMR2, PWR_EXTI_WAKEUP_PINS_MASK, (sPinParams->WakeUpPin << EXTI_IMR2_IM55_Pos)); +#endif /* !DUAL_CORE */ +} + +/** + * @brief Disable the Wake-up PINx functionality. + * @param WakeUpPin : Specifies the Wake-Up pin to be disabled. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 : Disable PA0 wake-up PIN. + * @arg PWR_WAKEUP_PIN2 : Disable PA2 wake-up PIN. + * @arg PWR_WAKEUP_PIN3 : Disable PI8 wake-up PIN. + * @arg PWR_WAKEUP_PIN4 : Disable PC13 wake-up PIN. + * @arg PWR_WAKEUP_PIN5 : Disable PI11 wake-up PIN. + * @arg PWR_WAKEUP_PIN6 : Disable PC1 wake-up PIN. + * @note The PWR_WAKEUP_PIN3 and PWR_WAKEUP_PIN5 are available only for + * devices that support GPIOI port. + * @retval None + */ +void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin) +{ + /* Check the parameter */ + assert_param (IS_PWR_WAKEUP_PIN (WakeUpPin)); + + /* Disable the WakeUpPin */ + CLEAR_BIT (PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Get the Wake-Up Pin pending flags. + * @param WakeUpFlag : Specifies the Wake-Up PIN flag to be checked. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_FLAG1 : Get wakeup event received from PA0. + * @arg PWR_WAKEUP_FLAG2 : Get wakeup event received from PA2. + * @arg PWR_WAKEUP_FLAG3 : Get wakeup event received from PI8. + * @arg PWR_WAKEUP_FLAG4 : Get wakeup event received from PC13. + * @arg PWR_WAKEUP_FLAG5 : Get wakeup event received from PI11. + * @arg PWR_WAKEUP_FLAG6 : Get wakeup event received from PC1. + * @arg PWR_WAKEUP_FLAG_ALL : Get Wakeup event received from all + * wake up pins. + * @note The PWR_WAKEUP_FLAG3 and PWR_WAKEUP_FLAG5 are available only for + * devices that support GPIOI port. + * @retval The Wake-Up pin flag. + */ +uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag) +{ + /* Check the parameters */ + assert_param (IS_PWR_WAKEUP_FLAG (WakeUpFlag)); + + /* Return the wake up pin flag */ + return (PWR->WKUPFR & WakeUpFlag); +} + +/** + * @brief Clear the Wake-Up pin pending flag. + * @param WakeUpFlag: Specifies the Wake-Up PIN flag to clear. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_FLAG1 : Clear the wakeup event received from PA0. + * @arg PWR_WAKEUP_FLAG2 : Clear the wakeup event received from PA2. + * @arg PWR_WAKEUP_FLAG3 : Clear the wakeup event received from PI8. + * @arg PWR_WAKEUP_FLAG4 : Clear the wakeup event received from PC13. + * @arg PWR_WAKEUP_FLAG5 : Clear the wakeup event received from PI11. + * @arg PWR_WAKEUP_FLAG6 : Clear the wakeup event received from PC1. + * @arg PWR_WAKEUP_FLAG_ALL : Clear the wakeup events received from + * all wake up pins. + * @note The PWR_WAKEUP_FLAG3 and PWR_WAKEUP_FLAG5 are available only for + * devices that support GPIOI port. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag) +{ + /* Check the parameter */ + assert_param (IS_PWR_WAKEUP_FLAG (WakeUpFlag)); + + /* Clear the wake up event received from wake up pin x */ + SET_BIT (PWR->WKUPCR, WakeUpFlag); + + /* Check if the wake up event is well cleared */ + if ((PWR->WKUPFR & WakeUpFlag) != 0U) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief This function handles the PWR WAKEUP PIN interrupt request. + * @note This API should be called under the WAKEUP_PIN_IRQHandler(). + * @retval None. + */ +void HAL_PWREx_WAKEUP_PIN_IRQHandler (void) +{ + /* Wakeup pin EXTI line interrupt detected */ + if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) != 0U) + { + /* Clear PWR WKUPF1 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP1); + + /* PWR WKUP1 interrupt user callback */ + HAL_PWREx_WKUP1_Callback (); + } + else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF2) != 0U) + { + /* Clear PWR WKUPF2 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP2); + + /* PWR WKUP2 interrupt user callback */ + HAL_PWREx_WKUP2_Callback (); + } +#if defined (PWR_WKUPFR_WKUPF3) + else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF3) != 0U) + { + /* Clear PWR WKUPF3 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP3); + + /* PWR WKUP3 interrupt user callback */ + HAL_PWREx_WKUP3_Callback (); + } +#endif /* defined (PWR_WKUPFR_WKUPF3) */ + else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF4) != 0U) + { + /* Clear PWR WKUPF4 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP4); + + /* PWR WKUP4 interrupt user callback */ + HAL_PWREx_WKUP4_Callback (); + } +#if defined (PWR_WKUPFR_WKUPF5) + else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF5) != 0U) + { + /* Clear PWR WKUPF5 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP5); + + /* PWR WKUP5 interrupt user callback */ + HAL_PWREx_WKUP5_Callback (); + } +#endif /* defined (PWR_WKUPFR_WKUPF5) */ + else + { + /* Clear PWR WKUPF6 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP6); + + /* PWR WKUP6 interrupt user callback */ + HAL_PWREx_WKUP6_Callback (); + } +} + +/** + * @brief PWR WKUP1 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP1_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP1Callback can be implemented in the user file + */ +} + +/** + * @brief PWR WKUP2 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP2_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP2Callback can be implemented in the user file + */ +} + +#if defined (PWR_WKUPFR_WKUPF3) +/** + * @brief PWR WKUP3 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP3_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP3Callback can be implemented in the user file + */ +} +#endif /* defined (PWR_WKUPFR_WKUPF3) */ + +/** + * @brief PWR WKUP4 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP4_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP4Callback can be implemented in the user file + */ +} + +#if defined (PWR_WKUPFR_WKUPF5) +/** + * @brief PWR WKUP5 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP5_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP5Callback can be implemented in the user file + */ +} +#endif /* defined (PWR_WKUPFR_WKUPF5) */ + +/** + * @brief PWR WKUP6 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP6_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP6Callback can be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group3 Peripherals control functions + * @brief Peripherals control functions + * +@verbatim + =============================================================================== + ##### Peripherals control functions ##### + =============================================================================== + + *** Main and Backup Regulators configuration *** + ================================================ + [..] + (+) The backup domain includes 4 Kbytes of backup SRAM accessible only + from the CPU, and addressed in 32-bit, 16-bit or 8-bit mode. Its + content is retained even in Standby or VBAT mode when the low power + backup regulator is enabled. It can be considered as an internal + EEPROM when VBAT is always present. You can use the + HAL_PWREx_EnableBkUpReg() function to enable the low power backup + regulator. + (+) When the backup domain is supplied by VDD (analog switch connected to + VDD) the backup SRAM is powered from VDD which replaces the VBAT power + supply to save battery life. + (+) The backup SRAM is not mass erased by a tamper event. It is read + protected to prevent confidential data, such as cryptographic private + key, from being accessed. The backup SRAM can be erased only through + the Flash interface when a protection level change from level 1 to + level 0 is requested. + -@- Refer to the description of Read protection (RDP) in the Flash + programming manual. + (+) The main internal regulator can be configured to have a tradeoff + between performance and power consumption when the device does not + operate at the maximum frequency. This is done through + HAL_PWREx_ControlVoltageScaling(VOS) function which configure the VOS + bit in PWR_D3CR register. + (+) The main internal regulator can be configured to operate in Low Power + mode when the system enters STOP mode to further reduce power + consumption. + This is done through HAL_PWREx_ControlStopModeVoltageScaling(SVOS) + function which configure the SVOS bit in PWR_CR1 register. + The selected SVOS4 and SVOS5 levels add an additional startup delay + when exiting from system Stop mode. + -@- Refer to the product datasheets for more details. + + *** USB Regulator configuration *** + =================================== + [..] + (+) The USB transceivers are supplied from a dedicated VDD33USB supply + that can be provided either by the integrated USB regulator, or by an + external USB supply. + (+) The USB regulator is enabled by HAL_PWREx_EnableUSBReg() function, the + VDD33USB is then provided from the USB regulator. + (+) When the USB regulator is enabled, the VDD33USB supply level detector + shall be enabled through HAL_PWREx_EnableUSBVoltageDetector() + function. + (+) The USB regulator is disabled through HAL_PWREx_DisableUSBReg() + function and VDD33USB can be provided from an external supply. In this + case VDD33USB and VDD50USB shall be connected together. + + *** VBAT battery charging *** + ============================= + [..] + (+) When VDD is present, the external battery connected to VBAT can be + charged through an internal resistance. VBAT charging can be performed + either through a 5 KOhm resistor or through a 1.5 KOhm resistor. + (+) VBAT charging is enabled by HAL_PWREx_EnableBatteryCharging + (ResistorValue) function with: + (++) ResistorValue: + (+++) PWR_BATTERY_CHARGING_RESISTOR_5: 5 KOhm resistor. + (+++) PWR_BATTERY_CHARGING_RESISTOR_1_5: 1.5 KOhm resistor. + (+) VBAT charging is disabled by HAL_PWREx_DisableBatteryCharging() + function. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Backup Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void) +{ + uint32_t tickstart; + + /* Enable the Backup regulator */ + SET_BIT (PWR->CR2, PWR_CR2_BREN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till Backup regulator ready flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_BRR) == 0U) + { + if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Backup Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void) +{ + uint32_t tickstart; + + /* Disable the Backup regulator */ + CLEAR_BIT (PWR->CR2, PWR_CR2_BREN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till Backup regulator ready flag is reset */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_BRR) != 0U) + { + if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Enable the USB Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void) +{ + uint32_t tickstart; + + /* Enable the USB regulator */ + SET_BIT (PWR->CR3, PWR_CR3_USBREGEN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till the USB regulator ready flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_USB33RDY) == 0U) + { + if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the USB Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void) +{ + uint32_t tickstart; + + /* Disable the USB regulator */ + CLEAR_BIT (PWR->CR3, PWR_CR3_USBREGEN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till the USB regulator ready flag is reset */ + while(__HAL_PWR_GET_FLAG (PWR_FLAG_USB33RDY) != 0U) + { + if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Enable the USB voltage level detector. + * @retval None. + */ +void HAL_PWREx_EnableUSBVoltageDetector (void) +{ + /* Enable the USB voltage detector */ + SET_BIT (PWR->CR3, PWR_CR3_USB33DEN); +} + +/** + * @brief Disable the USB voltage level detector. + * @retval None. + */ +void HAL_PWREx_DisableUSBVoltageDetector (void) +{ + /* Disable the USB voltage detector */ + CLEAR_BIT (PWR->CR3, PWR_CR3_USB33DEN); +} + +/** + * @brief Enable the Battery charging. + * @note When VDD is present, charge the external battery through an internal + * resistor. + * @param ResistorValue : Specifies the charging resistor. + * This parameter can be one of the following values : + * @arg PWR_BATTERY_CHARGING_RESISTOR_5 : 5 KOhm resistor. + * @arg PWR_BATTERY_CHARGING_RESISTOR_1_5 : 1.5 KOhm resistor. + * @retval None. + */ +void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue) +{ + /* Check the parameter */ + assert_param (IS_PWR_BATTERY_RESISTOR_SELECT (ResistorValue)); + + /* Specify the charging resistor */ + MODIFY_REG (PWR->CR3, PWR_CR3_VBRS, ResistorValue); + + /* Enable the Battery charging */ + SET_BIT (PWR->CR3, PWR_CR3_VBE); +} + +/** + * @brief Disable the Battery charging. + * @retval None. + */ +void HAL_PWREx_DisableBatteryCharging (void) +{ + /* Disable the Battery charging */ + CLEAR_BIT (PWR->CR3, PWR_CR3_VBE); +} + +#if defined (PWR_CR1_BOOSTE) +/** + * @brief Enable the booster to guarantee the analog switch AC performance when + * the VDD supply voltage is below 2V7. + * @note The VDD supply voltage can be monitored through the PVD and the PLS + * field bits. + * @retval None. + */ +void HAL_PWREx_EnableAnalogBooster (void) +{ + /* Enable the Analog voltage */ + SET_BIT (PWR->CR1, PWR_CR1_AVD_READY); + + /* Enable VDDA booster */ + SET_BIT (PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Disable the analog booster. + * @retval None. + */ +void HAL_PWREx_DisableAnalogBooster (void) +{ + /* Disable VDDA booster */ + CLEAR_BIT (PWR->CR1, PWR_CR1_BOOSTE); + + /* Disable the Analog voltage */ + CLEAR_BIT (PWR->CR1, PWR_CR1_AVD_READY); +} +#endif /* defined (PWR_CR1_BOOSTE) */ +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group4 Power Monitoring functions + * @brief Power Monitoring functions + * +@verbatim + =============================================================================== + ##### Power Monitoring functions ##### + =============================================================================== + + *** VBAT and Temperature supervision *** + ======================================== + [..] + (+) The VBAT battery voltage supply can be monitored by comparing it with + two threshold levels: VBAThigh and VBATlow. VBATH flag and VBATL flags + in the PWR control register 2 (PWR_CR2), indicate if VBAT is higher or + lower than the threshold. + (+) The temperature can be monitored by comparing it with two threshold + levels, TEMPhigh and TEMPlow. TEMPH and TEMPL flags, in the PWR + control register 2 (PWR_CR2), indicate whether the device temperature + is higher or lower than the threshold. + (+) The VBAT and the temperature monitoring is enabled by + HAL_PWREx_EnableMonitoring() function and disabled by + HAL_PWREx_DisableMonitoring() function. + (+) The HAL_PWREx_GetVBATLevel() function returns the VBAT level which can + be : PWR_VBAT_BELOW_LOW_THRESHOLD or PWR_VBAT_ABOVE_HIGH_THRESHOLD or + PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD. + (+) The HAL_PWREx_GetTemperatureLevel() function returns the Temperature + level which can be : + PWR_TEMP_BELOW_LOW_THRESHOLD or PWR_TEMP_ABOVE_HIGH_THRESHOLD or + PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD. + + *** AVD configuration *** + ========================= + [..] + (+) The AVD is used to monitor the VDDA power supply by comparing it to a + threshold selected by the AVD Level (ALS[3:0] bits in the PWR_CR1 + register). + (+) A AVDO flag is available to indicate if VDDA is higher or lower + than the AVD threshold. This event is internally connected to the EXTI + line 16 to generate an interrupt if enabled. + It is configurable through __HAL_PWR_AVD_EXTI_ENABLE_IT() macro. + (+) The AVD is stopped in System Standby mode. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the VBAT and temperature monitoring. + * @retval HAL status. + */ +void HAL_PWREx_EnableMonitoring (void) +{ + /* Enable the VBAT and Temperature monitoring */ + SET_BIT (PWR->CR2, PWR_CR2_MONEN); +} + +/** + * @brief Disable the VBAT and temperature monitoring. + * @retval HAL status. + */ +void HAL_PWREx_DisableMonitoring (void) +{ + /* Disable the VBAT and Temperature monitoring */ + CLEAR_BIT (PWR->CR2, PWR_CR2_MONEN); +} + +/** + * @brief Indicate whether the junction temperature is between, above or below + * the thresholds. + * @retval Temperature level. + */ +uint32_t HAL_PWREx_GetTemperatureLevel (void) +{ + uint32_t tempLevel, regValue; + + /* Read the temperature flags */ + regValue = READ_BIT (PWR->CR2, (PWR_CR2_TEMPH | PWR_CR2_TEMPL)); + + /* Check if the temperature is below the threshold */ + if (regValue == PWR_CR2_TEMPL) + { + tempLevel = PWR_TEMP_BELOW_LOW_THRESHOLD; + } + /* Check if the temperature is above the threshold */ + else if (regValue == PWR_CR2_TEMPH) + { + tempLevel = PWR_TEMP_ABOVE_HIGH_THRESHOLD; + } + /* The temperature is between the thresholds */ + else + { + tempLevel = PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD; + } + + return tempLevel; +} + +/** + * @brief Indicate whether the Battery voltage level is between, above or below + * the thresholds. + * @retval VBAT level. + */ +uint32_t HAL_PWREx_GetVBATLevel (void) +{ + uint32_t VBATLevel, regValue; + + /* Read the VBAT flags */ + regValue = READ_BIT (PWR->CR2, (PWR_CR2_VBATH | PWR_CR2_VBATL)); + + /* Check if the VBAT is below the threshold */ + if (regValue == PWR_CR2_VBATL) + { + VBATLevel = PWR_VBAT_BELOW_LOW_THRESHOLD; + } + /* Check if the VBAT is above the threshold */ + else if (regValue == PWR_CR2_VBATH) + { + VBATLevel = PWR_VBAT_ABOVE_HIGH_THRESHOLD; + } + /* The VBAT is between the thresholds */ + else + { + VBATLevel = PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD; + } + + return VBATLevel; +} + +#if defined (PWR_CSR1_MMCVDO) +/** + * @brief Get the VDDMMC voltage level. + * @retval The VDDMMC voltage level. + */ +PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void) +{ + PWREx_MMC_VoltageLevel mmc_voltage; + + /* Check voltage detector output on VDDMMC value */ + if ((PWR->CSR1 & PWR_CSR1_MMCVDO_Msk) == 0U) + { + mmc_voltage = PWR_MMC_VOLTAGE_BELOW_1V2; + } + else + { + mmc_voltage = PWR_MMC_VOLTAGE_EQUAL_ABOVE_1V2; + } + + return mmc_voltage; +} +#endif /* defined (PWR_CSR1_MMCVDO) */ + +/** + * @brief Configure the event mode and the voltage threshold detected by the + * Analog Voltage Detector (AVD). + * @param sConfigAVD : Pointer to an PWREx_AVDTypeDef structure that contains + * the configuration information for the AVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @note For dual core devices, please ensure to configure the EXTI lines for + * the different Cortex-Mx through PWR_Exported_Macro provided by this + * driver. All combination are allowed: wake up only Cortex-M7, wake up + * only Cortex-M4 and wake up Cortex-M7 and Cortex-M4. + * @retval None. + */ +void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD) +{ + /* Check the parameters */ + assert_param (IS_PWR_AVD_LEVEL (sConfigAVD->AVDLevel)); + assert_param (IS_PWR_AVD_MODE (sConfigAVD->Mode)); + + /* Set the ALS[18:17] bits according to AVDLevel value */ + MODIFY_REG (PWR->CR1, PWR_CR1_ALS, sConfigAVD->AVDLevel); + + /* Clear any previous config */ +#if !defined (DUAL_CORE) + __HAL_PWR_AVD_EXTI_DISABLE_EVENT (); + __HAL_PWR_AVD_EXTI_DISABLE_IT (); +#endif /* !defined (DUAL_CORE) */ + + __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE (); + __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE (); + +#if !defined (DUAL_CORE) + /* Configure the interrupt mode */ + if ((sConfigAVD->Mode & AVD_MODE_IT) == AVD_MODE_IT) + { + __HAL_PWR_AVD_EXTI_ENABLE_IT (); + } + + /* Configure the event mode */ + if ((sConfigAVD->Mode & AVD_MODE_EVT) == AVD_MODE_EVT) + { + __HAL_PWR_AVD_EXTI_ENABLE_EVENT (); + } +#endif /* !defined (DUAL_CORE) */ + + /* Rising edge configuration */ + if ((sConfigAVD->Mode & AVD_RISING_EDGE) == AVD_RISING_EDGE) + { + __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE (); + } + + /* Falling edge configuration */ + if ((sConfigAVD->Mode & AVD_FALLING_EDGE) == AVD_FALLING_EDGE) + { + __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE (); + } +} + +/** + * @brief Enable the Analog Voltage Detector (AVD). + * @retval None. + */ +void HAL_PWREx_EnableAVD (void) +{ + /* Enable the Analog Voltage Detector */ + SET_BIT (PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Disable the Analog Voltage Detector(AVD). + * @retval None. + */ +void HAL_PWREx_DisableAVD (void) +{ + /* Disable the Analog Voltage Detector */ + CLEAR_BIT (PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief This function handles the PWR PVD/AVD interrupt request. + * @note This API should be called under the PVD_AVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_AVD_IRQHandler (void) +{ + /* Check if the Programmable Voltage Detector is enabled (PVD) */ + if (READ_BIT (PWR->CR1, PWR_CR1_PVDEN) != 0U) + { +#if defined (DUAL_CORE) + if (HAL_GetCurrentCPUID () == CM7_CPUID) +#endif /* defined (DUAL_CORE) */ + { + /* Check PWR D1/CD EXTI flag */ + if (__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + + if(__HAL_PWR_GET_FLAG (PWR_FLAG_AVDO) == 0U) + { + /* Clear PWR EXTI D1/CD pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG (); + } + } + } +#if defined (DUAL_CORE) + else + { + /* Check PWR EXTI D2 flag */ + if (__HAL_PWR_PVD_EXTID2_GET_FLAG () != 0U) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + + if(__HAL_PWR_GET_FLAG (PWR_FLAG_AVDO) == 0U) + { + /* Clear PWR EXTI D2 pending bit */ + __HAL_PWR_PVD_EXTID2_CLEAR_FLAG (); + } + } + } +#endif /* defined (DUAL_CORE) */ + } + + /* Check if the Analog Voltage Detector is enabled (AVD) */ + if (READ_BIT (PWR->CR1, PWR_CR1_AVDEN) != 0U) + { +#if defined (DUAL_CORE) + if (HAL_GetCurrentCPUID () == CM7_CPUID) +#endif /* defined (DUAL_CORE) */ + { + /* Check PWR EXTI D1/CD flag */ + if (__HAL_PWR_AVD_EXTI_GET_FLAG () != 0U) + { + /* PWR AVD interrupt user callback */ + HAL_PWREx_AVDCallback (); + + if(__HAL_PWR_GET_FLAG (PWR_FLAG_PVDO) == 0U) + { + /* Clear PWR EXTI D1/CD pending bit */ + __HAL_PWR_AVD_EXTI_CLEAR_FLAG (); + } + } + } +#if defined (DUAL_CORE) + else + { + /* Check PWR EXTI D2 flag */ + if (__HAL_PWR_AVD_EXTID2_GET_FLAG () != 0U) + { + /* PWR AVD interrupt user callback */ + HAL_PWREx_AVDCallback (); + + if(__HAL_PWR_GET_FLAG (PWR_FLAG_PVDO) == 0U) + { + /* Clear PWR EXTI D2 pending bit */ + __HAL_PWR_AVD_EXTID2_CLEAR_FLAG (); + } + } + } +#endif /* defined (DUAL_CORE) */ + } +} + +/** + * @brief PWR AVD interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_AVDCallback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWR_AVDCallback can be implemented in the user file + */ +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_qspi.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_qspi.c new file mode 100644 index 0000000..fc0a603 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_qspi.c @@ -0,0 +1,2666 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_qspi.c + * @author MCD Application Team + * @brief QSPI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the QuadSPI interface (QSPI). + * + Initialization and de-initialization functions + * + Indirect functional mode management + * + Memory-mapped functional mode management + * + Auto-polling functional mode management + * + Interrupts and flags management + * + MDMA channel configuration for indirect functional mode + * + Errors management and abort functionality + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + *** Initialization *** + ====================== + [..] + (#) As prerequisite, fill in the HAL_QSPI_MspInit() : + (++) Enable QuadSPI clock interface with __HAL_RCC_QSPI_CLK_ENABLE(). + (++) Reset QuadSPI Peripheral with __HAL_RCC_QSPI_FORCE_RESET() and __HAL_RCC_QSPI_RELEASE_RESET(). + (++) Enable the clocks for the QuadSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). + (++) Configure these QuadSPI pins in alternate mode using HAL_GPIO_Init(). + (++) If interrupt mode is used, enable and configure QuadSPI global + interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + (++) If DMA mode is used, enable the clocks for the QuadSPI MDMA + with __HAL_RCC_MDMA_CLK_ENABLE(), configure MDMA with HAL_MDMA_Init(), + link it with QuadSPI handle using __HAL_LINKDMA(), enable and configure + MDMA global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + (#) Configure the flash size, the clock prescaler, the fifo threshold, the + clock mode, the sample shifting and the CS high time using the HAL_QSPI_Init() function. + + *** Indirect functional mode *** + ================================ + [..] + (#) Configure the command sequence using the HAL_QSPI_Command() or HAL_QSPI_Command_IT() + functions : + (++) Instruction phase : the mode used and if present the instruction opcode. + (++) Address phase : the mode used and if present the size and the address value. + (++) Alternate-bytes phase : the mode used and if present the size and the alternate + bytes values. + (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase). + (++) Data phase : the mode used and if present the number of bytes. + (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay + if activated. + (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode. + (#) If no data is required for the command, it is sent directly to the memory : + (++) In polling mode, the output of the function is done when the transfer is complete. + (++) In interrupt mode, HAL_QSPI_CmdCpltCallback() will be called when the transfer is complete. + (#) For the indirect write mode, use HAL_QSPI_Transmit(), HAL_QSPI_Transmit_DMA() or + HAL_QSPI_Transmit_IT() after the command configuration : + (++) In polling mode, the output of the function is done when the transfer is complete. + (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold + is reached and HAL_QSPI_TxCpltCallback() will be called when the transfer is complete. + (++) In DMA mode,HAL_QSPI_TxCpltCallback() will be called when the transfer is complete. + (#) For the indirect read mode, use HAL_QSPI_Receive(), HAL_QSPI_Receive_DMA() or + HAL_QSPI_Receive_IT() after the command configuration : + (++) In polling mode, the output of the function is done when the transfer is complete. + (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold + is reached and HAL_QSPI_RxCpltCallback() will be called when the transfer is complete. + (++) In DMA mode,HAL_QSPI_RxCpltCallback() will be called when the transfer is complete. + + *** Auto-polling functional mode *** + ==================================== + [..] + (#) Configure the command sequence and the auto-polling functional mode using the + HAL_QSPI_AutoPolling() or HAL_QSPI_AutoPolling_IT() functions : + (++) Instruction phase : the mode used and if present the instruction opcode. + (++) Address phase : the mode used and if present the size and the address value. + (++) Alternate-bytes phase : the mode used and if present the size and the alternate + bytes values. + (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase). + (++) Data phase : the mode used. + (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay + if activated. + (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode. + (++) The size of the status bytes, the match value, the mask used, the match mode (OR/AND), + the polling interval and the automatic stop activation. + (#) After the configuration : + (++) In polling mode, the output of the function is done when the status match is reached. The + automatic stop is activated to avoid an infinite loop. + (++) In interrupt mode, HAL_QSPI_StatusMatchCallback() will be called each time the status match is reached. + + *** MDMA functional mode *** + ==================================== + [..] + (#) Configure the SourceInc and DestinationInc of MDMA parameters in the HAL_QSPI_MspInit() function : + (++) MDMA settings for write operation : + (+) The DestinationInc should be MDMA_DEST_INC_DISABLE + (+) The SourceInc must be a value of MDMA_Source_increment_mode (Except the MDMA_SRC_INC_DOUBLEWORD). + (+) The SourceDataSize must be a value of MDMA Source data size (Except the MDMA_SRC_DATASIZE_DOUBLEWORD) + aligned with MDMA_Source_increment_mode . + (+) The DestDataSize must be a value of MDMA Destination data size (Except the MDMA_DEST_DATASIZE_DOUBLEWORD) + (++) MDMA settings for read operation : + (+) The SourceInc should be MDMA_SRC_INC_DISABLE + (+) The DestinationInc must be a value of MDMA_Destination_increment_mode (Except the MDMA_DEST_INC_DOUBLEWORD). + (+) The SourceDataSize must be a value of MDMA Source data size (Except the MDMA_SRC_DATASIZE_DOUBLEWORD) . + (+) The DestDataSize must be a value of MDMA Destination data size (Except the MDMA_DEST_DATASIZE_DOUBLEWORD) + aligned with MDMA_Destination_increment_mode. + (++)The buffer Transfer Length (BufferTransferLength) = number of bytes in the FIFO (FifoThreshold) of the Quadspi. + (#)In case of wrong MDMA setting + (++) For write operation : + (+) If the DestinationInc is different to MDMA_DEST_INC_DISABLE , it will be disabled by the HAL_QSPI_Transmit_DMA(). + (++) For read operation : + (+) If the SourceInc is not set to MDMA_SRC_INC_DISABLE , it will be disabled by the HAL_QSPI_Receive_DMA(). + + *** Memory-mapped functional mode *** + ===================================== + [..] + (#) Configure the command sequence and the memory-mapped functional mode using the + HAL_QSPI_MemoryMapped() functions : + (++) Instruction phase : the mode used and if present the instruction opcode. + (++) Address phase : the mode used and the size. + (++) Alternate-bytes phase : the mode used and if present the size and the alternate + bytes values. + (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase). + (++) Data phase : the mode used. + (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay + if activated. + (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode. + (++) The timeout activation and the timeout period. + (#) After the configuration, the QuadSPI will be used as soon as an access on the AHB is done on + the address range. HAL_QSPI_TimeOutCallback() will be called when the timeout expires. + + *** Errors management and abort functionality *** + ================================================= + [..] + (#) HAL_QSPI_GetError() function gives the error raised during the last operation. + (#) HAL_QSPI_Abort() and HAL_QSPI_Abort_IT() functions aborts any on-going operation and + flushes the fifo : + (++) In polling mode, the output of the function is done when the transfer + complete bit is set and the busy bit cleared. + (++) In interrupt mode, HAL_QSPI_AbortCpltCallback() will be called when + the transfer complete bit is set. + + *** Control functions *** + ========================= + [..] + (#) HAL_QSPI_GetState() function gives the current state of the HAL QuadSPI driver. + (#) HAL_QSPI_SetTimeout() function configures the timeout value used in the driver. + (#) HAL_QSPI_SetFifoThreshold() function configures the threshold on the Fifo of the QSPI IP. + (#) HAL_QSPI_GetFifoThreshold() function gives the current of the Fifo's threshold + (#) HAL_QSPI_SetFlashID() function configures the index of the flash memory to be accessed. + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_QSPI_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_QSPI_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) FifoThresholdCallback : callback when the fifo threshold is reached. + (+) CmdCpltCallback : callback when a command without data is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) StatusMatchCallback : callback when a status match occurs. + (+) TimeOutCallback : callback when the timeout perioed expires. + (+) MspInitCallback : QSPI MspInit. + (+) MspDeInitCallback : QSPI MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_QSPI_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) FifoThresholdCallback : callback when the fifo threshold is reached. + (+) CmdCpltCallback : callback when a command without data is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) StatusMatchCallback : callback when a status match occurs. + (+) TimeOutCallback : callback when the timeout perioed expires. + (+) MspInitCallback : QSPI MspInit. + (+) MspDeInitCallback : QSPI MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_QSPI_Init and if the state is HAL_QSPI_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_QSPI_Init + and HAL_QSPI_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_QSPI_Init and HAL_QSPI_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_QSPI_RegisterCallback before calling HAL_QSPI_DeInit + or HAL_QSPI_Init function. + + When The compilation define USE_HAL_QSPI_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + *** Workarounds linked to Silicon Limitation *** + ==================================================== + [..] + (#) Workarounds Implemented inside HAL Driver + (++) Extra data written in the FIFO at the end of a read transfer + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +#if defined(QUADSPI) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup QSPI QSPI + * @brief QSPI HAL module driver + * @{ + */ +#ifdef HAL_QSPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ + +/* Private define ------------------------------------------------------------*/ +/** @defgroup QSPI_Private_Constants QSPI Private Constants + * @{ + */ +#define QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE 0x00000000U /*!Instance)); + assert_param(IS_QSPI_CLOCK_PRESCALER(hqspi->Init.ClockPrescaler)); + assert_param(IS_QSPI_FIFO_THRESHOLD(hqspi->Init.FifoThreshold)); + assert_param(IS_QSPI_SSHIFT(hqspi->Init.SampleShifting)); + assert_param(IS_QSPI_FLASH_SIZE(hqspi->Init.FlashSize)); + assert_param(IS_QSPI_CS_HIGH_TIME(hqspi->Init.ChipSelectHighTime)); + assert_param(IS_QSPI_CLOCK_MODE(hqspi->Init.ClockMode)); + assert_param(IS_QSPI_DUAL_FLASH_MODE(hqspi->Init.DualFlash)); + + if (hqspi->Init.DualFlash != QSPI_DUALFLASH_ENABLE ) + { + assert_param(IS_QSPI_FLASH_ID(hqspi->Init.FlashID)); + } + + if(hqspi->State == HAL_QSPI_STATE_RESET) + { + +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + /* Reset Callback pointers in HAL_QSPI_STATE_RESET only */ + hqspi->ErrorCallback = HAL_QSPI_ErrorCallback; + hqspi->AbortCpltCallback = HAL_QSPI_AbortCpltCallback; + hqspi->FifoThresholdCallback = HAL_QSPI_FifoThresholdCallback; + hqspi->CmdCpltCallback = HAL_QSPI_CmdCpltCallback; + hqspi->RxCpltCallback = HAL_QSPI_RxCpltCallback; + hqspi->TxCpltCallback = HAL_QSPI_TxCpltCallback; + hqspi->StatusMatchCallback = HAL_QSPI_StatusMatchCallback; + hqspi->TimeOutCallback = HAL_QSPI_TimeOutCallback; + + if(hqspi->MspInitCallback == NULL) + { + hqspi->MspInitCallback = HAL_QSPI_MspInit; + } + + /* Init the low level hardware */ + hqspi->MspInitCallback(hqspi); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_QSPI_MspInit(hqspi); +#endif + + /* Configure the default timeout for the QSPI memory access */ + HAL_QSPI_SetTimeout(hqspi, HAL_QSPI_TIMEOUT_DEFAULT_VALUE); + } + + /* Configure QSPI FIFO Threshold */ + MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, + ((hqspi->Init.FifoThreshold - 1U) << QUADSPI_CR_FTHRES_Pos)); + + /* Wait till BUSY flag reset */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout); + + if(status == HAL_OK) + { + /* Configure QSPI Clock Prescaler and Sample Shift */ + MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PRESCALER | QUADSPI_CR_SSHIFT | QUADSPI_CR_FSEL | QUADSPI_CR_DFM), + ((hqspi->Init.ClockPrescaler << QUADSPI_CR_PRESCALER_Pos) | + hqspi->Init.SampleShifting | hqspi->Init.FlashID | hqspi->Init.DualFlash)); + + /* Configure QSPI Flash Size, CS High Time and Clock Mode */ + MODIFY_REG(hqspi->Instance->DCR, (QUADSPI_DCR_FSIZE | QUADSPI_DCR_CSHT | QUADSPI_DCR_CKMODE), + ((hqspi->Init.FlashSize << QUADSPI_DCR_FSIZE_Pos) | + hqspi->Init.ChipSelectHighTime | hqspi->Init.ClockMode)); + + /* Enable the QSPI peripheral */ + __HAL_QSPI_ENABLE(hqspi); + + /* Set QSPI error code to none */ + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + /* Initialize the QSPI state */ + hqspi->State = HAL_QSPI_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief De-Initialize the QSPI peripheral. + * @param hqspi QSPI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_DeInit(QSPI_HandleTypeDef *hqspi) +{ + /* Check the QSPI handle allocation */ + if(hqspi == NULL) + { + return HAL_ERROR; + } + + /* Disable the QSPI Peripheral Clock */ + __HAL_QSPI_DISABLE(hqspi); + +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + if(hqspi->MspDeInitCallback == NULL) + { + hqspi->MspDeInitCallback = HAL_QSPI_MspDeInit; + } + + /* DeInit the low level hardware */ + hqspi->MspDeInitCallback(hqspi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_QSPI_MspDeInit(hqspi); +#endif + + /* Set QSPI error code to none */ + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + /* Initialize the QSPI state */ + hqspi->State = HAL_QSPI_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initialize the QSPI MSP. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_MspInit(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_QSPI_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the QSPI MSP. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_QSPI_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup QSPI_Exported_Functions_Group2 Input and Output operation functions + * @brief QSPI Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Handle the interrupts. + (+) Handle the command sequence. + (+) Transmit data in blocking, interrupt or DMA mode. + (+) Receive data in blocking, interrupt or DMA mode. + (+) Manage the auto-polling functional mode. + (+) Manage the memory-mapped functional mode. + +@endverbatim + * @{ + */ + +/** + * @brief Handle QSPI interrupt request. + * @param hqspi QSPI handle + * @retval None + */ +void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi) +{ + __IO uint32_t *data_reg; + uint32_t flag = READ_REG(hqspi->Instance->SR); + uint32_t itsource = READ_REG(hqspi->Instance->CR); + + /* QSPI Fifo Threshold interrupt occurred ----------------------------------*/ + if(((flag & QSPI_FLAG_FT) != 0U) && ((itsource & QSPI_IT_FT) != 0U)) + { + data_reg = &hqspi->Instance->DR; + + if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX) + { + /* Transmission process */ + while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != RESET) + { + if (hqspi->TxXferCount > 0U) + { + /* Fill the FIFO until the threshold is reached */ + *((__IO uint8_t *)data_reg) = *hqspi->pTxBuffPtr; + hqspi->pTxBuffPtr++; + hqspi->TxXferCount--; + } + else + { + /* No more data available for the transfer */ + /* Disable the QSPI FIFO Threshold Interrupt */ + __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_FT); + break; + } + } + } + else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX) + { + /* Receiving Process */ + while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != RESET) + { + if (hqspi->RxXferCount > 0U) + { + /* Read the FIFO until the threshold is reached */ + *hqspi->pRxBuffPtr = *((__IO uint8_t *)data_reg); + hqspi->pRxBuffPtr++; + hqspi->RxXferCount--; + } + else + { + /* All data have been received for the transfer */ + /* Disable the QSPI FIFO Threshold Interrupt */ + __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_FT); + break; + } + } + } + else + { + /* Nothing to do */ + } + + /* FIFO Threshold callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->FifoThresholdCallback(hqspi); +#else + HAL_QSPI_FifoThresholdCallback(hqspi); +#endif + } + + /* QSPI Transfer Complete interrupt occurred -------------------------------*/ + else if(((flag & QSPI_FLAG_TC) != 0U) && ((itsource & QSPI_IT_TC) != 0U)) + { + /* Clear interrupt */ + WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TC); + + /* Disable the QSPI FIFO Threshold, Transfer Error and Transfer complete Interrupts */ + __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT); + + /* Transfer complete callback */ + if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX) + { + if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) + { + /* Disable using MDMA by clearing DMAEN, note that DMAEN bit is "reserved" + but no impact on H7 HW and it minimize the cost in the footprint */ + CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hqspi->hmdma); + } + + + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + + /* TX Complete callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->TxCpltCallback(hqspi); +#else + HAL_QSPI_TxCpltCallback(hqspi); +#endif + } + else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX) + { + if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) + { + /* Disable using MDMA by clearing DMAEN, note that DMAEN bit is "reserved" + but no impact on H7 HW and it minimize the cost in the footprint */ + CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hqspi->hmdma); + } + else + { + data_reg = &hqspi->Instance->DR; + while(READ_BIT(hqspi->Instance->SR, QUADSPI_SR_FLEVEL) != 0U) + { + if (hqspi->RxXferCount > 0U) + { + /* Read the last data received in the FIFO until it is empty */ + *hqspi->pRxBuffPtr = *((__IO uint8_t *)data_reg); + hqspi->pRxBuffPtr++; + hqspi->RxXferCount--; + } + else + { + /* All data have been received for the transfer */ + break; + } + } + } + + + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + + /* RX Complete callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->RxCpltCallback(hqspi); +#else + HAL_QSPI_RxCpltCallback(hqspi); +#endif + } + else if(hqspi->State == HAL_QSPI_STATE_BUSY) + { + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + + /* Command Complete callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->CmdCpltCallback(hqspi); +#else + HAL_QSPI_CmdCpltCallback(hqspi); +#endif + } + else if(hqspi->State == HAL_QSPI_STATE_ABORT) + { + /* Reset functional mode configuration to indirect write mode by default */ + CLEAR_BIT(hqspi->Instance->CCR, QUADSPI_CCR_FMODE); + + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + + if (hqspi->ErrorCode == HAL_QSPI_ERROR_NONE) + { + /* Abort called by the user */ + + /* Abort Complete callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->AbortCpltCallback(hqspi); +#else + HAL_QSPI_AbortCpltCallback(hqspi); +#endif + } + else + { + /* Abort due to an error (eg : MDMA error) */ + + /* Error callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->ErrorCallback(hqspi); +#else + HAL_QSPI_ErrorCallback(hqspi); +#endif + } + } + else + { + /* Nothing to do */ + } + } + + /* QSPI Status Match interrupt occurred ------------------------------------*/ + else if(((flag & QSPI_FLAG_SM) != 0U) && ((itsource & QSPI_IT_SM) != 0U)) + { + /* Clear interrupt */ + WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_SM); + + /* Check if the automatic poll mode stop is activated */ + if(READ_BIT(hqspi->Instance->CR, QUADSPI_CR_APMS) != 0U) + { + /* Disable the QSPI Transfer Error and Status Match Interrupts */ + __HAL_QSPI_DISABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE)); + + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + } + + /* Status match callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->StatusMatchCallback(hqspi); +#else + HAL_QSPI_StatusMatchCallback(hqspi); +#endif + } + + /* QSPI Transfer Error interrupt occurred ----------------------------------*/ + else if(((flag & QSPI_FLAG_TE) != 0U) && ((itsource & QSPI_IT_TE) != 0U)) + { + /* Clear interrupt */ + WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TE); + + /* Disable all the QSPI Interrupts */ + __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT); + + /* Set error code */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_TRANSFER; + + if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) + { + /* Disable using MDMA by clearing DMAEN, note that DMAEN bit is "reserved" + but no impact on H7 HW and it minimize the cost in the footprint */ + CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); + + /* Disable the MDMA channel */ + hqspi->hmdma->XferAbortCallback = QSPI_DMAAbortCplt; + if (HAL_MDMA_Abort_IT(hqspi->hmdma) != HAL_OK) + { + /* Set error code to DMA */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; + + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + + /* Error callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->ErrorCallback(hqspi); +#else + HAL_QSPI_ErrorCallback(hqspi); +#endif + } + } + else + { + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + + /* Error callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->ErrorCallback(hqspi); +#else + HAL_QSPI_ErrorCallback(hqspi); +#endif + } + } + + /* QSPI Timeout interrupt occurred -----------------------------------------*/ + else if(((flag & QSPI_FLAG_TO) != 0U) && ((itsource & QSPI_IT_TO) != 0U)) + { + /* Clear interrupt */ + WRITE_REG(hqspi->Instance->FCR, QSPI_FLAG_TO); + + /* Timeout callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->TimeOutCallback(hqspi); +#else + HAL_QSPI_TimeOutCallback(hqspi); +#endif + } + + else + { + /* Nothing to do */ + } +} + +/** + * @brief Set the command configuration. + * @param hqspi QSPI handle + * @param cmd : structure that contains the command configuration information + * @param Timeout Timeout duration + * @note This function is used only in Indirect Read or Write Modes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_Command(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); + if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) + { + assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); + } + + assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); + } + + assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); + if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) + { + assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); + } + + assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); + assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); + + assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); + assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); + assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + /* Update QSPI state */ + hqspi->State = HAL_QSPI_STATE_BUSY; + + /* Wait till BUSY flag reset */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Call the configuration function */ + QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + if (cmd->DataMode == QSPI_DATA_NONE) + { + /* When there is no data phase, the transfer start as soon as the configuration is done + so wait until TC flag is set to go back in idle state */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); + + /* Update QSPI state */ + hqspi->State = HAL_QSPI_STATE_READY; + } + } + else + { + /* Update QSPI state */ + hqspi->State = HAL_QSPI_STATE_READY; + } + } + } + else + { + status = HAL_BUSY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Return function status */ + return status; +} + +/** + * @brief Set the command configuration in interrupt mode. + * @param hqspi QSPI handle + * @param cmd structure that contains the command configuration information + * @note This function is used only in Indirect Read or Write Modes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_Command_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); + if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) + { + assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); + } + + assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); + } + + assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); + if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) + { + assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); + } + + assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); + assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); + + assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); + assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); + assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + /* Update QSPI state */ + hqspi->State = HAL_QSPI_STATE_BUSY; + + /* Wait till BUSY flag reset */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout); + + if (status == HAL_OK) + { + if (cmd->DataMode == QSPI_DATA_NONE) + { + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC); + } + + /* Call the configuration function */ + QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + if (cmd->DataMode == QSPI_DATA_NONE) + { + /* When there is no data phase, the transfer start as soon as the configuration is done + so activate TC and TE interrupts */ + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Enable the QSPI Transfer Error Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_TC); + } + else + { + /* Update QSPI state */ + hqspi->State = HAL_QSPI_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + status = HAL_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + + /* Return function status */ + return status; +} + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hqspi QSPI handle + * @param pData pointer to data buffer + * @param Timeout Timeout duration + * @note This function is used only in Indirect Write Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_Transmit(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart = HAL_GetTick(); + __IO uint32_t *data_reg = &hqspi->Instance->DR; + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + if(pData != NULL ) + { + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX; + + /* Configure counters and size of the handle */ + hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1U; + hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1U; + hqspi->pTxBuffPtr = pData; + + /* Configure QSPI: CCR register with functional as indirect write */ + MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + while(hqspi->TxXferCount > 0U) + { + /* Wait until FT flag is set to send data */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_FT, SET, tickstart, Timeout); + + if (status != HAL_OK) + { + break; + } + + *((__IO uint8_t *)data_reg) = *hqspi->pTxBuffPtr; + hqspi->pTxBuffPtr++; + hqspi->TxXferCount--; + } + + if (status == HAL_OK) + { + /* Wait until TC flag is set to go back in idle state */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Clear Transfer Complete bit */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); + + } + } + + /* Update QSPI state */ + hqspi->State = HAL_QSPI_STATE_READY; + } + else + { + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + } + else + { + status = HAL_BUSY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + return status; +} + + +/** + * @brief Receive an amount of data in blocking mode. + * @param hqspi QSPI handle + * @param pData pointer to data buffer + * @param Timeout Timeout duration + * @note This function is used only in Indirect Read Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_Receive(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart = HAL_GetTick(); + uint32_t addr_reg = READ_REG(hqspi->Instance->AR); + __IO uint32_t *data_reg = &hqspi->Instance->DR; + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + if(pData != NULL ) + { + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX; + + /* Configure counters and size of the handle */ + hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1U; + hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1U; + hqspi->pRxBuffPtr = pData; + + /* Configure QSPI: CCR register with functional as indirect read */ + MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Start the transfer by re-writing the address in AR register */ + WRITE_REG(hqspi->Instance->AR, addr_reg); + + while(hqspi->RxXferCount > 0U) + { + /* Wait until FT or TC flag is set to read received data */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, (QSPI_FLAG_FT | QSPI_FLAG_TC), SET, tickstart, Timeout); + + if (status != HAL_OK) + { + break; + } + + *hqspi->pRxBuffPtr = *((__IO uint8_t *)data_reg); + hqspi->pRxBuffPtr++; + hqspi->RxXferCount--; + } + + if (status == HAL_OK) + { + /* Wait until TC flag is set to go back in idle state */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Clear Transfer Complete bit */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); + + } + } + + /* Update QSPI state */ + hqspi->State = HAL_QSPI_STATE_READY; + } + else + { + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + } + } + else + { + status = HAL_BUSY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + return status; +} + +/** + * @brief Send an amount of data in non-blocking mode with interrupt. + * @param hqspi QSPI handle + * @param pData pointer to data buffer + * @note This function is used only in Indirect Write Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_Transmit_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + if(pData != NULL ) + { + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX; + + /* Configure counters and size of the handle */ + hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1U; + hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1U; + hqspi->pTxBuffPtr = pData; + + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC); + + /* Configure QSPI: CCR register with functional as indirect write */ + MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC); + } + else + { + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + status = HAL_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + + return status; +} + +/** + * @brief Receive an amount of data in non-blocking mode with interrupt. + * @param hqspi QSPI handle + * @param pData pointer to data buffer + * @note This function is used only in Indirect Read Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_Receive_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t addr_reg = READ_REG(hqspi->Instance->AR); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + if(pData != NULL ) + { + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX; + + /* Configure counters and size of the handle */ + hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1U; + hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1U; + hqspi->pRxBuffPtr = pData; + + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_TC); + + /* Configure QSPI: CCR register with functional as indirect read */ + MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Start the transfer by re-writing the address in AR register */ + WRITE_REG(hqspi->Instance->AR, addr_reg); + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC); + } + else + { + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + status = HAL_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + + return status; +} + +/** + * @brief Send an amount of data in non-blocking mode with DMA. + * @param hqspi QSPI handle + * @param pData pointer to data buffer + * @note This function is used only in Indirect Write Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_Transmit_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t data_size = (READ_REG(hqspi->Instance->DLR) + 1U); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + /* Clear the error code */ + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + if(pData != NULL ) + { + /* Configure counters of the handle */ + hqspi->TxXferCount = data_size; + + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX; + + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, (QSPI_FLAG_TE | QSPI_FLAG_TC)); + + /* Configure size and pointer of the handle */ + hqspi->TxXferSize = hqspi->TxXferCount; + hqspi->pTxBuffPtr = pData; + + /* Configure QSPI: CCR register with functional mode as indirect write */ + MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + /* Set the QSPI MDMA transfer complete callback */ + hqspi->hmdma->XferCpltCallback = QSPI_DMATxCplt; + + /* Set the MDMA error callback */ + hqspi->hmdma->XferErrorCallback = QSPI_DMAError; + + /* Clear the MDMA abort callback */ + hqspi->hmdma->XferAbortCallback = NULL; + + /* In Transmit mode , the MDMA destination is the QSPI DR register : Force the MDMA Destination Increment to disable */ + MODIFY_REG(hqspi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) ,MDMA_DEST_INC_DISABLE); + + /* Update MDMA configuration with the correct SourceInc field for Write operation */ + if (hqspi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_BYTE) + { + MODIFY_REG(hqspi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_BYTE); + } + else if (hqspi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_HALFWORD) + { + MODIFY_REG(hqspi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_HALFWORD); + } + else if (hqspi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_WORD) + { + MODIFY_REG(hqspi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_WORD); + } + else + { + /* in case of incorrect source data size */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; + status = HAL_ERROR; + } + + /* Enable the QSPI transmit MDMA */ + if (HAL_MDMA_Start_IT(hqspi->hmdma, (uint32_t)pData, (uint32_t)&hqspi->Instance->DR, hqspi->TxXferSize, 1) == HAL_OK) + { + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Enable the QSPI transfer error Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE); + + /* Enable using MDMA by setting DMAEN, note that DMAEN bit is "reserved" + but no impact on H7 HW and it minimize the cost in the footprint */ + SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); + } + else + { + status = HAL_ERROR; + hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; + hqspi->State = HAL_QSPI_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + status = HAL_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + + return status; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @param hqspi QSPI handle + * @param pData pointer to data buffer. + * @note This function is used only in Indirect Read Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_Receive_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t addr_reg = READ_REG(hqspi->Instance->AR); + uint32_t data_size = (READ_REG(hqspi->Instance->DLR) + 1U); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + /* Clear the error code */ + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + if(pData != NULL ) + { + /* Configure counters of the handle */ + hqspi->RxXferCount = data_size; + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX; + + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, (QSPI_FLAG_TE | QSPI_FLAG_TC)); + + /* Configure size and pointer of the handle */ + hqspi->RxXferSize = hqspi->RxXferCount; + hqspi->pRxBuffPtr = pData; + + /* Set the QSPI MDMA transfer complete callback */ + hqspi->hmdma->XferCpltCallback = QSPI_DMARxCplt; + + /* Set the MDMA error callback */ + hqspi->hmdma->XferErrorCallback = QSPI_DMAError; + + /* Clear the MDMA abort callback */ + hqspi->hmdma->XferAbortCallback = NULL; + + /* In Receive mode , the MDMA source is the QSPI DR register : Force the MDMA Source Increment to disable */ + MODIFY_REG(hqspi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_DISABLE); + + /* Update MDMA configuration with the correct DestinationInc field for read operation */ + if (hqspi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_BYTE) + { + MODIFY_REG(hqspi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_BYTE); + } + else if (hqspi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_HALFWORD) + { + MODIFY_REG(hqspi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_HALFWORD); + } + else if (hqspi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_WORD) + { + MODIFY_REG(hqspi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_WORD); + } + else + { + /* in case of incorrect destination data size */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; + status = HAL_ERROR; + } + /* Configure QSPI: CCR register with functional as indirect read */ + MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Start the transfer by re-writing the address in AR register */ + WRITE_REG(hqspi->Instance->AR, addr_reg); + + /* Enable the MDMA */ + if (HAL_MDMA_Start_IT(hqspi->hmdma, (uint32_t)&hqspi->Instance->DR, (uint32_t)pData, hqspi->RxXferSize, 1) == HAL_OK) + { + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Enable the QSPI transfer error Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE); + + /* Enable using MDMA by setting DMAEN, note that DMAEN bit is "reserved" + but no impact on H7 HW and it minimize the cost in the footprint */ + SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); + } + else + { + status = HAL_ERROR; + hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; + hqspi->State = HAL_QSPI_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_PARAM; + status = HAL_ERROR; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + status = HAL_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + + return status; +} + +/** + * @brief Configure the QSPI Automatic Polling Mode in blocking mode. + * @param hqspi QSPI handle + * @param cmd structure that contains the command configuration information. + * @param cfg structure that contains the polling configuration information. + * @param Timeout Timeout duration + * @note This function is used only in Automatic Polling Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_AutoPolling(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); + if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) + { + assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); + } + + assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); + } + + assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); + if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) + { + assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); + } + + assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); + assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); + + assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); + assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); + assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); + + assert_param(IS_QSPI_INTERVAL(cfg->Interval)); + assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize)); + assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode)); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING; + + /* Wait till BUSY flag reset */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Configure QSPI: PSMAR register with the status match value */ + WRITE_REG(hqspi->Instance->PSMAR, cfg->Match); + + /* Configure QSPI: PSMKR register with the status mask value */ + WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask); + + /* Configure QSPI: PIR register with the interval value */ + WRITE_REG(hqspi->Instance->PIR, cfg->Interval); + + /* Configure QSPI: CR register with Match mode and Automatic stop enabled + (otherwise there will be an infinite loop in blocking mode) */ + MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS), + (cfg->MatchMode | QSPI_AUTOMATIC_STOP_ENABLE)); + + /* Call the configuration function */ + cmd->NbData = cfg->StatusBytesSize; + QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING); + + /* Wait until SM flag is set to go back in idle state */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_SM, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM); + + /* Update state */ + hqspi->State = HAL_QSPI_STATE_READY; + } + } + } + else + { + status = HAL_BUSY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Return function status */ + return status; +} + +/** + * @brief Configure the QSPI Automatic Polling Mode in non-blocking mode. + * @param hqspi QSPI handle + * @param cmd structure that contains the command configuration information. + * @param cfg structure that contains the polling configuration information. + * @note This function is used only in Automatic Polling Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); + if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) + { + assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); + } + + assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); + } + + assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); + if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) + { + assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); + } + + assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); + assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); + + assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); + assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); + assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); + + assert_param(IS_QSPI_INTERVAL(cfg->Interval)); + assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize)); + assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode)); + assert_param(IS_QSPI_AUTOMATIC_STOP(cfg->AutomaticStop)); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING; + + /* Wait till BUSY flag reset */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout); + + if (status == HAL_OK) + { + /* Configure QSPI: PSMAR register with the status match value */ + WRITE_REG(hqspi->Instance->PSMAR, cfg->Match); + + /* Configure QSPI: PSMKR register with the status mask value */ + WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask); + + /* Configure QSPI: PIR register with the interval value */ + WRITE_REG(hqspi->Instance->PIR, cfg->Interval); + + /* Configure QSPI: CR register with Match mode and Automatic stop mode */ + MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS), + (cfg->MatchMode | cfg->AutomaticStop)); + + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_SM); + + /* Call the configuration function */ + cmd->NbData = cfg->StatusBytesSize; + QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING); + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Enable the QSPI Transfer Error and status match Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE)); + + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + } + else + { + status = HAL_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the Memory Mapped mode. + * @param hqspi QSPI handle + * @param cmd structure that contains the command configuration information. + * @param cfg structure that contains the memory mapped configuration information. + * @note This function is used only in Memory mapped Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode)); + if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) + { + assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction)); + } + + assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode)); + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize)); + } + + assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode)); + if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) + { + assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize)); + } + + assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles)); + assert_param(IS_QSPI_DATA_MODE(cmd->DataMode)); + + assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode)); + assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle)); + assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode)); + + assert_param(IS_QSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation)); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + hqspi->ErrorCode = HAL_QSPI_ERROR_NONE; + + /* Update state */ + hqspi->State = HAL_QSPI_STATE_BUSY_MEM_MAPPED; + + /* Wait till BUSY flag reset */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout); + + if (status == HAL_OK) + { + /* Configure QSPI: CR register with timeout counter enable */ + MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_TCEN, cfg->TimeOutActivation); + + if (cfg->TimeOutActivation == QSPI_TIMEOUT_COUNTER_ENABLE) + { + assert_param(IS_QSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod)); + + /* Configure QSPI: LPTR register with the low-power timeout value */ + WRITE_REG(hqspi->Instance->LPTR, cfg->TimeOutPeriod); + + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TO); + + /* Enable the QSPI TimeOut Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TO); + } + + /* Call the configuration function */ + QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED); + } + } + else + { + status = HAL_BUSY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Return function status */ + return status; +} + +/** + * @brief Transfer Error callback. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_ErrorCallback(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_QSPI_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Abort completed callback. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_AbortCpltCallback(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_QSPI_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Command completed callback. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_CmdCpltCallback(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_QSPI_CmdCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_RxCpltCallback(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_QSPI_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callback. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_TxCpltCallback(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_QSPI_TxCpltCallback could be implemented in the user file + */ +} + + +/** + * @brief FIFO Threshold callback. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_QSPI_FIFOThresholdCallback could be implemented in the user file + */ +} + +/** + * @brief Status Match callback. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_StatusMatchCallback(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_QSPI_StatusMatchCallback could be implemented in the user file + */ +} + +/** + * @brief Timeout callback. + * @param hqspi QSPI handle + * @retval None + */ +__weak void HAL_QSPI_TimeOutCallback(QSPI_HandleTypeDef *hqspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hqspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_QSPI_TimeOutCallback could be implemented in the user file + */ +} +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User QSPI Callback + * To be used to override the weak predefined callback + * @param hqspi QSPI handle + * @param CallbackId ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_QSPI_ERROR_CB_ID QSPI Error Callback ID + * @arg @ref HAL_QSPI_ABORT_CB_ID QSPI Abort Callback ID + * @arg @ref HAL_QSPI_FIFO_THRESHOLD_CB_ID QSPI FIFO Threshold Callback ID + * @arg @ref HAL_QSPI_CMD_CPLT_CB_ID QSPI Command Complete Callback ID + * @arg @ref HAL_QSPI_RX_CPLT_CB_ID QSPI Rx Complete Callback ID + * @arg @ref HAL_QSPI_TX_CPLT_CB_ID QSPI Tx Complete Callback ID + * @arg @ref HAL_QSPI_STATUS_MATCH_CB_ID QSPI Status Match Callback ID + * @arg @ref HAL_QSPI_TIMEOUT_CB_ID QSPI Timeout Callback ID + * @arg @ref HAL_QSPI_MSP_INIT_CB_ID QSPI MspInit callback ID + * @arg @ref HAL_QSPI_MSP_DEINIT_CB_ID QSPI MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_QSPI_RegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId, pQSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(pCallback == NULL) + { + /* Update the error code */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + switch (CallbackId) + { + case HAL_QSPI_ERROR_CB_ID : + hqspi->ErrorCallback = pCallback; + break; + case HAL_QSPI_ABORT_CB_ID : + hqspi->AbortCpltCallback = pCallback; + break; + case HAL_QSPI_FIFO_THRESHOLD_CB_ID : + hqspi->FifoThresholdCallback = pCallback; + break; + case HAL_QSPI_CMD_CPLT_CB_ID : + hqspi->CmdCpltCallback = pCallback; + break; + case HAL_QSPI_RX_CPLT_CB_ID : + hqspi->RxCpltCallback = pCallback; + break; + case HAL_QSPI_TX_CPLT_CB_ID : + hqspi->TxCpltCallback = pCallback; + break; + case HAL_QSPI_STATUS_MATCH_CB_ID : + hqspi->StatusMatchCallback = pCallback; + break; + case HAL_QSPI_TIMEOUT_CB_ID : + hqspi->TimeOutCallback = pCallback; + break; + case HAL_QSPI_MSP_INIT_CB_ID : + hqspi->MspInitCallback = pCallback; + break; + case HAL_QSPI_MSP_DEINIT_CB_ID : + hqspi->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hqspi->State == HAL_QSPI_STATE_RESET) + { + switch (CallbackId) + { + case HAL_QSPI_MSP_INIT_CB_ID : + hqspi->MspInitCallback = pCallback; + break; + case HAL_QSPI_MSP_DEINIT_CB_ID : + hqspi->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hqspi); + return status; +} + +/** + * @brief Unregister a User QSPI Callback + * QSPI Callback is redirected to the weak predefined callback + * @param hqspi QSPI handle + * @param CallbackId ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_QSPI_ERROR_CB_ID QSPI Error Callback ID + * @arg @ref HAL_QSPI_ABORT_CB_ID QSPI Abort Callback ID + * @arg @ref HAL_QSPI_FIFO_THRESHOLD_CB_ID QSPI FIFO Threshold Callback ID + * @arg @ref HAL_QSPI_CMD_CPLT_CB_ID QSPI Command Complete Callback ID + * @arg @ref HAL_QSPI_RX_CPLT_CB_ID QSPI Rx Complete Callback ID + * @arg @ref HAL_QSPI_TX_CPLT_CB_ID QSPI Tx Complete Callback ID + * @arg @ref HAL_QSPI_STATUS_MATCH_CB_ID QSPI Status Match Callback ID + * @arg @ref HAL_QSPI_TIMEOUT_CB_ID QSPI Timeout Callback ID + * @arg @ref HAL_QSPI_MSP_INIT_CB_ID QSPI MspInit callback ID + * @arg @ref HAL_QSPI_MSP_DEINIT_CB_ID QSPI MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_QSPI_UnRegisterCallback (QSPI_HandleTypeDef *hqspi, HAL_QSPI_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + switch (CallbackId) + { + case HAL_QSPI_ERROR_CB_ID : + hqspi->ErrorCallback = HAL_QSPI_ErrorCallback; + break; + case HAL_QSPI_ABORT_CB_ID : + hqspi->AbortCpltCallback = HAL_QSPI_AbortCpltCallback; + break; + case HAL_QSPI_FIFO_THRESHOLD_CB_ID : + hqspi->FifoThresholdCallback = HAL_QSPI_FifoThresholdCallback; + break; + case HAL_QSPI_CMD_CPLT_CB_ID : + hqspi->CmdCpltCallback = HAL_QSPI_CmdCpltCallback; + break; + case HAL_QSPI_RX_CPLT_CB_ID : + hqspi->RxCpltCallback = HAL_QSPI_RxCpltCallback; + break; + case HAL_QSPI_TX_CPLT_CB_ID : + hqspi->TxCpltCallback = HAL_QSPI_TxCpltCallback; + break; + case HAL_QSPI_STATUS_MATCH_CB_ID : + hqspi->StatusMatchCallback = HAL_QSPI_StatusMatchCallback; + break; + case HAL_QSPI_TIMEOUT_CB_ID : + hqspi->TimeOutCallback = HAL_QSPI_TimeOutCallback; + break; + case HAL_QSPI_MSP_INIT_CB_ID : + hqspi->MspInitCallback = HAL_QSPI_MspInit; + break; + case HAL_QSPI_MSP_DEINIT_CB_ID : + hqspi->MspDeInitCallback = HAL_QSPI_MspDeInit; + break; + default : + /* Update the error code */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hqspi->State == HAL_QSPI_STATE_RESET) + { + switch (CallbackId) + { + case HAL_QSPI_MSP_INIT_CB_ID : + hqspi->MspInitCallback = HAL_QSPI_MspInit; + break; + case HAL_QSPI_MSP_DEINIT_CB_ID : + hqspi->MspDeInitCallback = HAL_QSPI_MspDeInit; + break; + default : + /* Update the error code */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hqspi->ErrorCode |= HAL_QSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hqspi); + return status; +} +#endif + +/** + * @} + */ + +/** @defgroup QSPI_Exported_Functions_Group3 Peripheral Control and State functions + * @brief QSPI control and State functions + * +@verbatim + =============================================================================== + ##### Peripheral Control and State functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Check in run-time the state of the driver. + (+) Check the error code set during last operation. + (+) Abort any operation. + + +@endverbatim + * @{ + */ + +/** + * @brief Return the QSPI handle state. + * @param hqspi QSPI handle + * @retval HAL state + */ +HAL_QSPI_StateTypeDef HAL_QSPI_GetState(const QSPI_HandleTypeDef *hqspi) +{ + /* Return QSPI handle state */ + return hqspi->State; +} + +/** +* @brief Return the QSPI error code. +* @param hqspi QSPI handle +* @retval QSPI Error Code +*/ +uint32_t HAL_QSPI_GetError(const QSPI_HandleTypeDef *hqspi) +{ + return hqspi->ErrorCode; +} + +/** +* @brief Abort the current transmission. +* @param hqspi QSPI handle +* @retval HAL status +*/ +HAL_StatusTypeDef HAL_QSPI_Abort(QSPI_HandleTypeDef *hqspi) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart = HAL_GetTick(); + + /* Check if the state is in one of the busy states */ + if (((uint32_t)hqspi->State & 0x2U) != 0U) + { + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) + { + /* Disable using MDMA by clearing DMAEN, note that DMAEN bit is "reserved" + but no impact on H7 HW and it minimize the cost in the footprint */ + CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); + + /* Abort MDMA */ + status = HAL_MDMA_Abort(hqspi->hmdma); + if(status != HAL_OK) + { + hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; + } + } + + if (__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY) != RESET) + { + /* Configure QSPI: CR register with Abort request */ + SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT); + + /* Wait until TC flag is set to go back in idle state */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, hqspi->Timeout); + + if (status == HAL_OK) + { + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); + + /* Wait until BUSY flag is reset */ + status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout); + } + + if (status == HAL_OK) + { + /* Reset functional mode configuration to indirect write mode by default */ + CLEAR_BIT(hqspi->Instance->CCR, QUADSPI_CCR_FMODE); + + /* Update state */ + hqspi->State = HAL_QSPI_STATE_READY; + } + } + else + { + /* Update state */ + hqspi->State = HAL_QSPI_STATE_READY; + } + } + + return status; +} + +/** +* @brief Abort the current transmission (non-blocking function) +* @param hqspi QSPI handle +* @retval HAL status +*/ +HAL_StatusTypeDef HAL_QSPI_Abort_IT(QSPI_HandleTypeDef *hqspi) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check if the state is in one of the busy states */ + if (((uint32_t)hqspi->State & 0x2U) != 0U) + { + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Update QSPI state */ + hqspi->State = HAL_QSPI_STATE_ABORT; + + /* Disable all interrupts */ + __HAL_QSPI_DISABLE_IT(hqspi, (QSPI_IT_TO | QSPI_IT_SM | QSPI_IT_FT | QSPI_IT_TC | QSPI_IT_TE)); + + if ((hqspi->Instance->CR & QUADSPI_CR_DMAEN) != 0U) + { + /* Disable using MDMA by clearing DMAEN, note that DMAEN bit is "reserved" + but no impact on H7 HW and it minimize the cost in the footprint */ + CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); + + /* Abort MDMA channel */ + hqspi->hmdma->XferAbortCallback = QSPI_DMAAbortCplt; + if (HAL_MDMA_Abort_IT(hqspi->hmdma) != HAL_OK) + { + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + + /* Abort Complete callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->AbortCpltCallback(hqspi); +#else + HAL_QSPI_AbortCpltCallback(hqspi); +#endif + } + } + else + { + if (__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY) != RESET) + { + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); + + /* Enable the QSPI Transfer Complete Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC); + + /* Configure QSPI: CR register with Abort request */ + SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT); + } + else + { + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + } + } + } + return status; +} + +/** @brief Set QSPI timeout. + * @param hqspi QSPI handle. + * @param Timeout Timeout for the QSPI memory access. + * @retval None + */ +void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout) +{ + hqspi->Timeout = Timeout; +} + +/** @brief Set QSPI Fifo threshold. + * @param hqspi QSPI handle. + * @param Threshold Threshold of the Fifo (value between 1 and 16). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + /* Synchronize init structure with new FIFO threshold value */ + hqspi->Init.FifoThreshold = Threshold; + + /* Configure QSPI FIFO Threshold */ + MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, + ((hqspi->Init.FifoThreshold - 1U) << QUADSPI_CR_FTHRES_Pos)); + } + else + { + status = HAL_BUSY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Return function status */ + return status; +} + +/** @brief Get QSPI Fifo threshold. + * @param hqspi QSPI handle. + * @retval Fifo threshold (value between 1 and 16) + */ +uint32_t HAL_QSPI_GetFifoThreshold(const QSPI_HandleTypeDef *hqspi) +{ + return ((READ_BIT(hqspi->Instance->CR, QUADSPI_CR_FTHRES) >> QUADSPI_CR_FTHRES_Pos) + 1U); +} + +/** @brief Set FlashID. + * @param hqspi QSPI handle. + * @param FlashID Index of the flash memory to be accessed. + * This parameter can be a value of @ref QSPI_Flash_Select. + * @note The FlashID is ignored when dual flash mode is enabled. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_QSPI_SetFlashID(QSPI_HandleTypeDef *hqspi, uint32_t FlashID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameter */ + assert_param(IS_QSPI_FLASH_ID(FlashID)); + + /* Process locked */ + __HAL_LOCK(hqspi); + + if(hqspi->State == HAL_QSPI_STATE_READY) + { + /* Synchronize init structure with new FlashID value */ + hqspi->Init.FlashID = FlashID; + + /* Configure QSPI FlashID */ + MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FSEL, FlashID); + } + else + { + status = HAL_BUSY; + } + + /* Process unlocked */ + __HAL_UNLOCK(hqspi); + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup QSPI_Private_Functions QSPI Private Functions + * @{ + */ + +/** + * @brief DMA QSPI receive process complete callback. + * @param hmdma MDMA handle + * @retval None + */ +static void QSPI_DMARxCplt(MDMA_HandleTypeDef *hmdma) +{ + QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)(hmdma->Parent); + hqspi->RxXferCount = 0U; + + /* Enable the QSPI transfer complete Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC); +} + +/** + * @brief DMA QSPI transmit process complete callback. + * @param hmdma MDMA handle + * @retval None + */ +static void QSPI_DMATxCplt(MDMA_HandleTypeDef *hmdma) +{ + QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)(hmdma->Parent); + hqspi->TxXferCount = 0U; + + /* Enable the QSPI transfer complete Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC); +} + +/** + * @brief DMA QSPI communication error callback. + * @param hmdma MDMA handle + * @retval None + */ +static void QSPI_DMAError(MDMA_HandleTypeDef *hmdma) +{ + QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )(hmdma->Parent); + + hqspi->RxXferCount = 0U; + hqspi->TxXferCount = 0U; + hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA; + + /* Disable using MDMA by clearing DMAEN, note that DMAEN bit is "reserved" + but no impact on H7 HW and it minimize the cost in the footprint */ + CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN); + + /* Abort the QSPI */ + (void)HAL_QSPI_Abort_IT(hqspi); + +} + +/** + * @brief MDMA QSPI abort complete callback. + * @param hmdma MDMA handle + * @retval None + */ +static void QSPI_DMAAbortCplt(MDMA_HandleTypeDef *hmdma) +{ + QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )(hmdma->Parent); + + hqspi->RxXferCount = 0U; + hqspi->TxXferCount = 0U; + + if(hqspi->State == HAL_QSPI_STATE_ABORT) + { + /* MDMA Abort called by QSPI abort */ + /* Clear interrupt */ + __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC); + + /* Enable the QSPI Transfer Complete Interrupt */ + __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC); + + /* Configure QSPI: CR register with Abort request */ + SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT); + } + else + { + /* MDMA Abort called due to a transfer error interrupt */ + /* Change state of QSPI */ + hqspi->State = HAL_QSPI_STATE_READY; + + /* Error callback */ +#if (USE_HAL_QSPI_REGISTER_CALLBACKS == 1) + hqspi->ErrorCallback(hqspi); +#else + HAL_QSPI_ErrorCallback(hqspi); +#endif + } +} + +/** + * @brief Wait for a flag state until timeout. + * @param hqspi QSPI handle + * @param Flag Flag checked + * @param State Value of the flag expected + * @param Tickstart Tick start value + * @param Timeout Duration of the timeout + * @retval HAL status + */ +static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag, + FlagStatus State, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is in expected state */ + while((__HAL_QSPI_GET_FLAG(hqspi, Flag)) != State) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hqspi->State = HAL_QSPI_STATE_ERROR; + hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT; + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief Configure the communication registers. + * @param hqspi QSPI handle + * @param cmd structure that contains the command configuration information + * @param FunctionalMode functional mode to configured + * This parameter can be one of the following values: + * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE: Indirect write mode + * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_READ: Indirect read mode + * @arg QSPI_FUNCTIONAL_MODE_AUTO_POLLING: Automatic polling mode + * @arg QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED: Memory-mapped mode + * @retval None + */ +static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode) +{ + assert_param(IS_QSPI_FUNCTIONAL_MODE(FunctionalMode)); + + if ((cmd->DataMode != QSPI_DATA_NONE) && (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)) + { + /* Configure QSPI: DLR register with the number of data to read or write */ + WRITE_REG(hqspi->Instance->DLR, (cmd->NbData - 1U)); + } + + if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE) + { + if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) + { + /* Configure QSPI: ABR register with alternate bytes value */ + WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes); + + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + /*---- Command with instruction, address and alternate bytes ----*/ + /* Configure QSPI: CCR register with all communications parameters */ + WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | + cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | + cmd->AlternateBytesSize | cmd->AlternateByteMode | + cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode | + cmd->Instruction | FunctionalMode)); + + if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED) + { + /* Configure QSPI: AR register with address value */ + WRITE_REG(hqspi->Instance->AR, cmd->Address); + } + } + else + { + /*---- Command with instruction and alternate bytes ----*/ + /* Configure QSPI: CCR register with all communications parameters */ + WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | + cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | + cmd->AlternateBytesSize | cmd->AlternateByteMode | + cmd->AddressMode | cmd->InstructionMode | + cmd->Instruction | FunctionalMode)); + } + } + else + { + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + /*---- Command with instruction and address ----*/ + /* Configure QSPI: CCR register with all communications parameters */ + WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | + cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | + cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode | + cmd->InstructionMode | cmd->Instruction | FunctionalMode)); + + if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED) + { + /* Configure QSPI: AR register with address value */ + WRITE_REG(hqspi->Instance->AR, cmd->Address); + } + } + else + { + /*---- Command with only instruction ----*/ + /* Configure QSPI: CCR register with all communications parameters */ + WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | + cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | + cmd->AlternateByteMode | cmd->AddressMode | + cmd->InstructionMode | cmd->Instruction | FunctionalMode)); + } + } + } + else + { + if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE) + { + /* Configure QSPI: ABR register with alternate bytes value */ + WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes); + + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + /*---- Command with address and alternate bytes ----*/ + /* Configure QSPI: CCR register with all communications parameters */ + WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | + cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | + cmd->AlternateBytesSize | cmd->AlternateByteMode | + cmd->AddressSize | cmd->AddressMode | + cmd->InstructionMode | FunctionalMode)); + + if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED) + { + /* Configure QSPI: AR register with address value */ + WRITE_REG(hqspi->Instance->AR, cmd->Address); + } + } + else + { + /*---- Command with only alternate bytes ----*/ + /* Configure QSPI: CCR register with all communications parameters */ + WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | + cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | + cmd->AlternateBytesSize | cmd->AlternateByteMode | + cmd->AddressMode | cmd->InstructionMode | FunctionalMode)); + } + } + else + { + if (cmd->AddressMode != QSPI_ADDRESS_NONE) + { + /*---- Command with only address ----*/ + /* Configure QSPI: CCR register with all communications parameters */ + WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | + cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | + cmd->AlternateByteMode | cmd->AddressSize | + cmd->AddressMode | cmd->InstructionMode | FunctionalMode)); + + if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED) + { + /* Configure QSPI: AR register with address value */ + WRITE_REG(hqspi->Instance->AR, cmd->Address); + } + } + else + { + /*---- Command with only data phase ----*/ + if (cmd->DataMode != QSPI_DATA_NONE) + { + /* Configure QSPI: CCR register with all communications parameters */ + WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode | + cmd->DataMode | (cmd->DummyCycles << QUADSPI_CCR_DCYC_Pos) | + cmd->AlternateByteMode | cmd->AddressMode | + cmd->InstructionMode | FunctionalMode)); + } + } + } + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_QSPI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(QUADSPI) */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c new file mode 100644 index 0000000..8c987ac --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c @@ -0,0 +1,1814 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Internal High Speed oscillator + (HSI 64MHz) with Flash 0 wait state,and all peripherals are off except + internal SRAM, Flash, JTAG and PWR + (+) There is no pre-scaler on High speed (AHB) and Low speed (APB) buses; + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analogue mode , except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses pre-scalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock kernel source(s) for peripherals which clocks are not + derived from the System clock through :RCC_D1CCIPR,RCC_D2CCIP1R,RCC_D2CCIP2R + and RCC_D3CCIPR registers + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle + after the clock enable bit is set on the hardware register + (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle + after the clock enable bit is set on the hardware register + + [..] + Implemented Workaround: + (+) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +#define MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define MCO2_GPIO_PORT GPIOC +#define MCO2_PIN GPIO_PIN_9 + +/** + * @} + */ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ + +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (HSE, HSI, LSE,CSI, LSI,HSI48, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB3, AHB1 + AHB2,AHB4,APB3, APB1L, APB1H, APB2, and APB4). + + [..] Internal/external clock and PLL configuration + (#) HSI (high-speed internal), 64 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + (#) CSI is a low-power RC oscillator which can be used directly as system clock, peripheral + clock, or PLL input.But even with frequency calibration, is less accurate than an + external crystal oscillator or ceramic resonator. + (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL , The RCC features three independent PLLs (clocked by HSI , HSE or CSI), + featuring three different output clocks and able to work either in integer or Fractional mode. + (++) A main PLL, PLL1, which is generally used to provide clocks to the CPU + and to some peripherals. + (++) Two dedicated PLLs, PLL2 and PLL3, which are used to generate the kernel clock for peripherals. + + + (#) CSS (Clock security system), once enabled and if a HSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched to HSI and an interrupt is generated if enabled. + The interrupt is linked to the Cortex-M NMI (Non-Mask-able Interrupt) + exception vector. + + (#) MCO1 (micro controller clock output), used to output HSI, LSE, HSE, PLL1(PLL1_Q) + or HSI48 clock (through a configurable pre-scaler) on PA8 pin. + + (#) MCO2 (micro controller clock output), used to output HSE, PLL2(PLL2_P), SYSCLK, + LSI, CSI, or PLL1(PLL1_P) clock (through a configurable pre-scaler) on PC9 pin. + + [..] System, AHB and APB buses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): CSI,HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System core clock through configurable + pre-scaler and used to clock the CPU, memory and peripherals mapped + on AHB and APB bus of the 3 Domains (D1, D2, D3)* through configurable pre-scalers + and used to clock the peripherals mapped on these buses. You can use + "HAL_RCC_GetSysClockFreq()" function to retrieve system clock frequency. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except those + with dual clock domain where kernel source clock could be selected through + RCC_D1CCIPR,RCC_D2CCIP1R,RCC_D2CCIP2R and RCC_D3CCIPR registers. + + (*) : 2 Domains (CD and SRD) for stm32h7a3xx and stm32h7b3xx family lines. +@endverbatim + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL1, PLL2 and PLL3 OFF + * - AHB, APB Bus pre-scaler set to 1. + * - CSS, MCO1 and MCO2 OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Increasing the CPU frequency */ + if (FLASH_LATENCY_DEFAULT > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_DEFAULT); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLASH_LATENCY_DEFAULT) + { + return HAL_ERROR; + } + + } + + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Set HSION bit */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM[6:0] bits to the reset value */ + SET_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM_6); + + /* Reset CFGR register */ + CLEAR_REG(RCC->CFGR); + + /* Update the SystemCoreClock and SystemD2Clock global variables */ + SystemCoreClock = HSI_VALUE; + SystemD2Clock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till clock switch is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != 0U) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset CSION, CSIKERON, HSEON, HSI48ON, HSECSSON, HSIDIV bits */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSIKERON | RCC_CR_HSIDIV | RCC_CR_HSIDIVF | RCC_CR_CSION | RCC_CR_CSIKERON \ + | RCC_CR_HSI48ON | RCC_CR_CSSHSEON); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear PLLON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL1RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset PLL2ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); + + /* Wait till PLL2 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL2RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset PLL3 bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); + + /* Wait till PLL3 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL3RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + +#if defined(RCC_D1CFGR_HPRE) + /* Reset D1CFGR register */ + CLEAR_REG(RCC->D1CFGR); + + /* Reset D2CFGR register */ + CLEAR_REG(RCC->D2CFGR); + + /* Reset D3CFGR register */ + CLEAR_REG(RCC->D3CFGR); +#else + /* Reset CDCFGR1 register */ + CLEAR_REG(RCC->CDCFGR1); + + /* Reset CDCFGR2 register */ + CLEAR_REG(RCC->CDCFGR2); + + /* Reset SRDCFGR register */ + CLEAR_REG(RCC->SRDCFGR); +#endif + + /* Reset PLLCKSELR register to default value */ + RCC->PLLCKSELR = RCC_PLLCKSELR_DIVM1_5 | RCC_PLLCKSELR_DIVM2_5 | RCC_PLLCKSELR_DIVM3_5; + + /* Reset PLLCFGR register to default value */ + WRITE_REG(RCC->PLLCFGR, 0x01FF0000U); + + /* Reset PLL1DIVR register to default value */ + WRITE_REG(RCC->PLL1DIVR, 0x01010280U); + + /* Reset PLL1FRACR register */ + CLEAR_REG(RCC->PLL1FRACR); + + /* Reset PLL2DIVR register to default value */ + WRITE_REG(RCC->PLL2DIVR, 0x01010280U); + + /* Reset PLL2FRACR register */ + CLEAR_REG(RCC->PLL2FRACR); + + /* Reset PLL3DIVR register to default value */ + WRITE_REG(RCC->PLL3DIVR, 0x01010280U); + + /* Reset PLL3FRACR register */ + CLEAR_REG(RCC->PLL3FRACR); + +#if defined(RCC_CR_HSEEXT) + /* Reset HSEEXT */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); +#endif /* RCC_CR_HSEEXT */ + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIER); + + /* Clear all interrupts flags */ + WRITE_REG(RCC->CICR, 0xFFFFFFFFU); + + /* Reset all RSR flags */ + SET_BIT(RCC->RSR, RCC_RSR_RMVF); + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLASH_LATENCY_DEFAULT < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_DEFAULT); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLASH_LATENCY_DEFAULT) + { + return HAL_ERROR; + } + + } + + return HAL_OK; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this function. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this function. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t temp1_pllckcfg, temp2_pllckcfg; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + const uint32_t temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + const uint32_t temp_pllckselr = RCC->PLLCKSELR; + /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ + if ((temp_sysclksrc == RCC_CFGR_SWS_HSE) || ((temp_sysclksrc == RCC_CFGR_SWS_PLL1) && ((temp_pllckselr & RCC_PLLCKSELR_PLLSRC) == RCC_PLLCKSELR_PLLSRC_HSE))) + { + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == 0U) + { + if ((uint32_t)(HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0U) + { + if ((uint32_t)(HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSICALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* When the HSI is used as system clock it will not be disabled */ + const uint32_t temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + const uint32_t temp_pllckselr = RCC->PLLCKSELR; + if ((temp_sysclksrc == RCC_CFGR_SWS_HSI) || ((temp_sysclksrc == RCC_CFGR_SWS_PLL1) && ((temp_pllckselr & RCC_PLLCKSELR_PLLSRC) == RCC_PLLCKSELR_PLLSRC_HSI))) + { + /* When HSI is used as system clock it will not be disabled */ + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, only HSI division and calibration are allowed */ + else + { + /* Enable the Internal High Speed oscillator (HSI, HSIDIV2, HSIDIV4, or HSIDIV8) */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIState); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == 0U) + { + if ((uint32_t)(HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + + else + { + /* Check the HSI State */ + if ((RCC_OscInitStruct->HSIState) != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI, HSIDIV2,HSIDIV4, or HSIDIV8) */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIState); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- CSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_CSI) == RCC_OSCILLATORTYPE_CSI) + { + /* Check the parameters */ + assert_param(IS_RCC_CSI(RCC_OscInitStruct->CSIState)); + assert_param(IS_RCC_CSICALIBRATION_VALUE(RCC_OscInitStruct->CSICalibrationValue)); + + /* When the CSI is used as system clock it will not disabled */ + const uint32_t temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + const uint32_t temp_pllckselr = RCC->PLLCKSELR; + if ((temp_sysclksrc == RCC_CFGR_SWS_CSI) || ((temp_sysclksrc == RCC_CFGR_SWS_PLL1) && ((temp_pllckselr & RCC_PLLCKSELR_PLLSRC) == RCC_PLLCKSELR_PLLSRC_CSI))) + { + /* When CSI is used as system clock it will not disabled */ + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_CSIRDY) != 0U) && (RCC_OscInitStruct->CSIState != RCC_CSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (CSI) calibration value.*/ + __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->CSICalibrationValue); + } + } + else + { + /* Check the CSI State */ + if ((RCC_OscInitStruct->CSIState) != RCC_CSI_OFF) + { + /* Enable the Internal High Speed oscillator (CSI). */ + __HAL_RCC_CSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till CSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_CSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > CSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (CSI) calibration value.*/ + __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->CSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (CSI). */ + __HAL_RCC_CSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till CSI is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_CSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > CSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if ((RCC_OscInitStruct->LSIState) != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + /*------------------------------ HSI48 Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the HSI48 State */ + if ((RCC_OscInitStruct->HSI48State) != RCC_HSI48_OFF) + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Enable write access to Backup domain */ + PWR->CR1 |= PWR_CR1_DBP; + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while ((PWR->CR1 & PWR_CR1_DBP) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if ((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL1) + { + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLRGE_VALUE(RCC_OscInitStruct->PLL.PLLRGE)); + assert_param(IS_RCC_PLLVCO_VALUE(RCC_OscInitStruct->PLL.PLLVCOSEL)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + assert_param(IS_RCC_PLLFRACN_VALUE(RCC_OscInitStruct->PLL.PLLFRACN)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); + + /* Disable PLLFRACN . */ + __HAL_RCC_PLLFRACN_DISABLE(); + + /* Configure PLL PLL1FRACN */ + __HAL_RCC_PLLFRACN_CONFIG(RCC_OscInitStruct->PLL.PLLFRACN); + + /* Select PLL1 input reference frequency range: VCI */ + __HAL_RCC_PLL_VCIRANGE(RCC_OscInitStruct->PLL.PLLRGE) ; + + /* Select PLL1 output frequency range : VCO */ + __HAL_RCC_PLL_VCORANGE(RCC_OscInitStruct->PLL.PLLVCOSEL) ; + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVP); + + /* Enable PLL1Q Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* Enable PLL1R Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVR); + + /* Enable PLL1FRACN . */ + __HAL_RCC_PLLFRACN_ENABLE(); + + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + temp1_pllckcfg = RCC->PLLCKSELR; + temp2_pllckcfg = RCC->PLL1DIVR; + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(temp1_pllckcfg, RCC_PLLCKSELR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + ((READ_BIT(temp1_pllckcfg, RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos) != RCC_OscInitStruct->PLL.PLLM) || + (READ_BIT(temp2_pllckcfg, RCC_PLL1DIVR_N1) != (RCC_OscInitStruct->PLL.PLLN - 1U)) || + ((READ_BIT(temp2_pllckcfg, RCC_PLL1DIVR_P1) >> RCC_PLL1DIVR_P1_Pos) != (RCC_OscInitStruct->PLL.PLLP - 1U)) || + ((READ_BIT(temp2_pllckcfg, RCC_PLL1DIVR_Q1) >> RCC_PLL1DIVR_Q1_Pos) != (RCC_OscInitStruct->PLL.PLLQ - 1U)) || + ((READ_BIT(temp2_pllckcfg, RCC_PLL1DIVR_R1) >> RCC_PLL1DIVR_R1_Pos) != (RCC_OscInitStruct->PLL.PLLR - 1U))) + { + return HAL_ERROR; + } + else + { + /* Check if only fractional part needs to be updated */ + temp1_pllckcfg = ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> RCC_PLL1FRACR_FRACN1_Pos); + if (RCC_OscInitStruct->PLL.PLLFRACN != temp1_pllckcfg) + { + assert_param(IS_RCC_PLLFRACN_VALUE(RCC_OscInitStruct->PLL.PLLFRACN)); + /* Disable PLL1FRACEN */ + __HAL_RCC_PLLFRACN_DISABLE(); + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + /* Wait at least 2 CK_REF (PLL input source divided by M) period to make sure next latched value will be taken into account. */ + while ((HAL_GetTick() - tickstart) < PLL_FRAC_TIMEOUT_VALUE) + { + } + /* Configure PLL1 PLL1FRACN */ + __HAL_RCC_PLLFRACN_CONFIG(RCC_OscInitStruct->PLL.PLLFRACN); + /* Enable PLL1FRACEN to latch new value. */ + __HAL_RCC_PLLFRACN_ENABLE(); + } + } + } + } + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency: FLASH Latency, this parameter depend on device selected + * + * @note The SystemCoreClock CMSIS variable is used to store System Core Clock Frequency + * and updated by HAL_InitTick() function called within this function + * + * @note The HSI is used (enabled by hardware) as system clock source after + * start-up from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after start-up delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @note Depending on the device voltage range, the software has to set correctly + * D1CPRE[3:0] bits to ensure that Domain1 core clock not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + HAL_StatusTypeDef halstatus; + uint32_t tickstart; + uint32_t common_system_clock; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + + } + + /* Increasing the BUS frequency divider */ + /*-------------------------- D1PCLK1/CDPCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_D1PCLK1) == RCC_CLOCKTYPE_D1PCLK1) + { +#if defined (RCC_D1CFGR_D1PPRE) + if ((RCC_ClkInitStruct->APB3CLKDivider) > (RCC->D1CFGR & RCC_D1CFGR_D1PPRE)) + { + assert_param(IS_RCC_D1PCLK1(RCC_ClkInitStruct->APB3CLKDivider)); + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1PPRE, RCC_ClkInitStruct->APB3CLKDivider); + } +#else + if ((RCC_ClkInitStruct->APB3CLKDivider) > (RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE)) + { + assert_param(IS_RCC_CDPCLK1(RCC_ClkInitStruct->APB3CLKDivider)); + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDPPRE, RCC_ClkInitStruct->APB3CLKDivider); + } +#endif + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { +#if defined (RCC_D2CFGR_D2PPRE1) + if ((RCC_ClkInitStruct->APB1CLKDivider) > (RCC->D2CFGR & RCC_D2CFGR_D2PPRE1)) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB1CLKDivider) > (RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE1)) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } +#endif + } + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { +#if defined(RCC_D2CFGR_D2PPRE2) + if ((RCC_ClkInitStruct->APB2CLKDivider) > (RCC->D2CFGR & RCC_D2CFGR_D2PPRE2)) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB2CLKDivider) > (RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE2)) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } +#endif + } + + /*-------------------------- D3PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_D3PCLK1) == RCC_CLOCKTYPE_D3PCLK1) + { +#if defined(RCC_D3CFGR_D3PPRE) + if ((RCC_ClkInitStruct->APB4CLKDivider) > (RCC->D3CFGR & RCC_D3CFGR_D3PPRE)) + { + assert_param(IS_RCC_D3PCLK1(RCC_ClkInitStruct->APB4CLKDivider)); + MODIFY_REG(RCC->D3CFGR, RCC_D3CFGR_D3PPRE, (RCC_ClkInitStruct->APB4CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB4CLKDivider) > (RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE)) + { + assert_param(IS_RCC_D3PCLK1(RCC_ClkInitStruct->APB4CLKDivider)); + MODIFY_REG(RCC->SRDCFGR, RCC_SRDCFGR_SRDPPRE, (RCC_ClkInitStruct->APB4CLKDivider)); + } +#endif + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { +#if defined (RCC_D1CFGR_HPRE) + if ((RCC_ClkInitStruct->AHBCLKDivider) > (RCC->D1CFGR & RCC_D1CFGR_HPRE)) + { + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } +#else + if ((RCC_ClkInitStruct->AHBCLKDivider) > (RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)) + { + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } +#endif + } + + /*------------------------- SYSCLK Configuration -------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLK(RCC_ClkInitStruct->SYSCLKDivider)); + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); +#if defined(RCC_D1CFGR_D1CPRE) + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1CPRE, RCC_ClkInitStruct->SYSCLKDivider); +#else + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDCPRE, RCC_ClkInitStruct->SYSCLKDivider); +#endif + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == 0U) + { + return HAL_ERROR; + } + } + /* CSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_CSI) + { + /* Check the PLL ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_CSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + } + + /* Decreasing the BUS frequency divider */ + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { +#if defined(RCC_D1CFGR_HPRE) + if ((RCC_ClkInitStruct->AHBCLKDivider) < (RCC->D1CFGR & RCC_D1CFGR_HPRE)) + { + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } +#else + if ((RCC_ClkInitStruct->AHBCLKDivider) < (RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)) + { + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } +#endif + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- D1PCLK1/CDPCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_D1PCLK1) == RCC_CLOCKTYPE_D1PCLK1) + { +#if defined(RCC_D1CFGR_D1PPRE) + if ((RCC_ClkInitStruct->APB3CLKDivider) < (RCC->D1CFGR & RCC_D1CFGR_D1PPRE)) + { + assert_param(IS_RCC_D1PCLK1(RCC_ClkInitStruct->APB3CLKDivider)); + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1PPRE, RCC_ClkInitStruct->APB3CLKDivider); + } +#else + if ((RCC_ClkInitStruct->APB3CLKDivider) < (RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE)) + { + assert_param(IS_RCC_CDPCLK1(RCC_ClkInitStruct->APB3CLKDivider)); + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDPPRE, RCC_ClkInitStruct->APB3CLKDivider); + } +#endif + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { +#if defined(RCC_D2CFGR_D2PPRE1) + if ((RCC_ClkInitStruct->APB1CLKDivider) < (RCC->D2CFGR & RCC_D2CFGR_D2PPRE1)) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB1CLKDivider) < (RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE1)) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } +#endif + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { +#if defined (RCC_D2CFGR_D2PPRE2) + if ((RCC_ClkInitStruct->APB2CLKDivider) < (RCC->D2CFGR & RCC_D2CFGR_D2PPRE2)) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB2CLKDivider) < (RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE2)) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } +#endif + } + + /*-------------------------- D3PCLK1/SRDPCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_D3PCLK1) == RCC_CLOCKTYPE_D3PCLK1) + { +#if defined(RCC_D3CFGR_D3PPRE) + if ((RCC_ClkInitStruct->APB4CLKDivider) < (RCC->D3CFGR & RCC_D3CFGR_D3PPRE)) + { + assert_param(IS_RCC_D3PCLK1(RCC_ClkInitStruct->APB4CLKDivider)); + MODIFY_REG(RCC->D3CFGR, RCC_D3CFGR_D3PPRE, (RCC_ClkInitStruct->APB4CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB4CLKDivider) < (RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE)) + { + assert_param(IS_RCC_SRDPCLK1(RCC_ClkInitStruct->APB4CLKDivider)); + MODIFY_REG(RCC->SRDCFGR, RCC_SRDCFGR_SRDPPRE, (RCC_ClkInitStruct->APB4CLKDivider)); + } +#endif + } + + /* Update the SystemCoreClock global variable */ +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos]) & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos]) & 0x1FU); +#endif + +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + /* Configure the source of time base considering new system clocks settings*/ + halstatus = HAL_InitTick(uwTickPrio); + + return halstatus; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + +@endverbatim + * @{ + */ + +/** + * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9). + * @note PA8/PC9 should be configured in alternate function mode. + * @param RCC_MCOx: specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8). + * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9). + * @param RCC_MCOSource: specifies the clock source to output. + * This parameter can be one of the following values: + * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_PLL1QCLK: PLL1Q clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSI48: HSI48 (48MHZ) selected as MCO1 source + * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLL2PCLK: PLL2P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLLCLK: PLL1P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_CSICLK: CSI clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_LSICLK: LSI clock selected as MCO2 source + * @param RCC_MCODiv: specifies the MCOx pre-scaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCOx clock + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef GPIO_InitStruct; + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + /* RCC_MCO1 */ + if (RCC_MCOx == RCC_MCO1) + { + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + + /* Configure the MCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO1_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); + + /* Mask MCO1 and MCO1PRE[3:0] bits then Select MCO1 clock source and pre-scaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv)); + } + else + { + assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); + + /* MCO2 Clock Enable */ + MCO2_CLK_ENABLE(); + + /* Configure the MCO2 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO2_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); + + /* Mask MCO2 and MCO2PRE[3:0] bits then Select MCO2 clock source and pre-scaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 7U))); + } +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M NMI (Non-Mask-able Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSHSEON) ; +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSSHSEON); +} + +/** + * @brief Returns the SYSCLK frequency + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is CSI, function returns values based on CSI_VALUE(*) + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on CSI_VALUE(*), + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * @note (*) CSI_VALUE is a constant defined in stm32h7xx_hal_conf.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSI_VALUE is a constant defined in stm32h7xx_hal_conf.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (***) HSE_VALUE is a constant defined in stm32h7xx_hal_conf.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baud rate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t pllp, pllsource, pllm, pllfracen, hsivalue; + float_t fracn1, pllvco; + uint32_t sysclockfreq; + + /* Get SYSCLK source -------------------------------------------------------*/ + + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + sysclockfreq = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + else + { + sysclockfreq = (uint32_t) HSI_VALUE; + } + + break; + + case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */ + sysclockfreq = CSI_VALUE; + break; + + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + break; + + case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> 4) ; + pllfracen = ((RCC-> PLLCFGR & RCC_PLLCFGR_PLL1FRACEN) >> RCC_PLLCFGR_PLL1FRACEN_Pos); + fracn1 = (float_t)(uint32_t)(pllfracen * ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> 3)); + + if (pllm != 0U) + { + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pllvco = ((float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + else + { + pllvco = ((float_t)HSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + break; + + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + default: + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + } + pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >> 9) + 1U) ; + sysclockfreq = (uint32_t)(float_t)(pllvco / (float_t)pllp); + } + else + { + sysclockfreq = 0U; + } + break; + + default: + sysclockfreq = CSI_VALUE; + break; + } + + return sysclockfreq; +} + + +/** + * @brief Returns the HCLK frequency + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemD2Clock CMSIS variable is used to store System domain2 Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + uint32_t common_system_clock; + +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos] & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos] & 0x1FU); +#endif + +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + return SystemD2Clock; +} + + +/** + * @brief Returns the PCLK1 frequency + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ +#if defined (RCC_D2CFGR_D2PPRE1) + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> ((D1CorePrescTable[(RCC->D2CFGR & RCC_D2CFGR_D2PPRE1) >> RCC_D2CFGR_D2PPRE1_Pos]) & 0x1FU)); +#else + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> ((D1CorePrescTable[(RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE1) >> RCC_CDCFGR2_CDPPRE1_Pos]) & 0x1FU)); +#endif +} + + +/** + * @brief Returns the D2 PCLK2 frequency + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ +#if defined(RCC_D2CFGR_D2PPRE2) + return (HAL_RCC_GetHCLKFreq() >> ((D1CorePrescTable[(RCC->D2CFGR & RCC_D2CFGR_D2PPRE2) >> RCC_D2CFGR_D2PPRE2_Pos]) & 0x1FU)); +#else + return (HAL_RCC_GetHCLKFreq() >> ((D1CorePrescTable[(RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE2) >> RCC_CDCFGR2_CDPPRE2_Pos]) & 0x1FU)); +#endif +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_CSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; + + /* Get the HSE configuration -----------------------------------------------*/ +#if defined(RCC_CR_HSEEXT) + if ((RCC->CR & (RCC_CR_HSEBYP | RCC_CR_HSEEXT)) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & (RCC_CR_HSEBYP | RCC_CR_HSEEXT)) == (RCC_CR_HSEBYP | RCC_CR_HSEEXT)) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS_DIGITAL; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } +#else + if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } +#endif /* RCC_CR_HSEEXT */ + + /* Get the CSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_CSION) == RCC_CR_CSION) + { + RCC_OscInitStruct->CSIState = RCC_CSI_ON; + } + else + { + RCC_OscInitStruct->CSIState = RCC_CSI_OFF; + } + +#if defined(RCC_VER_X) + if (HAL_GetREVID() <= REV_ID_Y) + { + RCC_OscInitStruct->CSICalibrationValue = (uint32_t)(READ_BIT(RCC->HSICFGR, HAL_RCC_REV_Y_CSITRIM_Msk) >> HAL_RCC_REV_Y_CSITRIM_Pos); + } + else + { + RCC_OscInitStruct->CSICalibrationValue = (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); + } +#else + RCC_OscInitStruct->CSICalibrationValue = (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); +#endif /*RCC_VER_X*/ + + /* Get the HSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + +#if defined(RCC_VER_X) + if (HAL_GetREVID() <= REV_ID_Y) + { + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)(READ_BIT(RCC->HSICFGR, HAL_RCC_REV_Y_HSITRIM_Msk) >> HAL_RCC_REV_Y_HSITRIM_Pos); + } + else + { + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); + } +#else + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); +#endif /*RCC_VER_X*/ + + /* Get the LSE configuration -----------------------------------------------*/ +#if defined(RCC_BDCR_LSEEXT) + if ((RCC->BDCR & (RCC_BDCR_LSEBYP | RCC_BDCR_LSEEXT)) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & (RCC_BDCR_LSEBYP | RCC_BDCR_LSEEXT)) == (RCC_BDCR_LSEBYP | RCC_BDCR_LSEEXT)) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS_DIGITAL; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } +#else + if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } +#endif /* RCC_BDCR_LSEEXT */ + + /* Get the LSI configuration -----------------------------------------------*/ + if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + /* Get the HSI48 configuration ---------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSI48ON) == RCC_CR_HSI48ON) + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_ON; + } + else + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; + } + + /* Get the PLL configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (uint32_t)((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos); + RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_N1) >> RCC_PLL1DIVR_N1_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_R1) >> RCC_PLL1DIVR_R1_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLP = (uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >> RCC_PLL1DIVR_P1_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_Q1) >> RCC_PLL1DIVR_Q1_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLRGE = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL1RGE)); + RCC_OscInitStruct->PLL.PLLVCOSEL = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL1VCOSEL) >> RCC_PLLCFGR_PLL1VCOSEL_Pos); + RCC_OscInitStruct->PLL.PLLFRACN = (uint32_t)(((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> RCC_PLL1FRACR_FRACN1_Pos)); +} + +/** + * @brief Configures the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency: Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | + RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1 ; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + +#if defined(RCC_D1CFGR_D1CPRE) + /* Get the SYSCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKDivider = (uint32_t)(RCC->D1CFGR & RCC_D1CFGR_D1CPRE); + + /* Get the D1HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->D1CFGR & RCC_D1CFGR_HPRE); + + /* Get the APB3 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB3CLKDivider = (uint32_t)(RCC->D1CFGR & RCC_D1CFGR_D1PPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->D2CFGR & RCC_D2CFGR_D2PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)(RCC->D2CFGR & RCC_D2CFGR_D2PPRE2); + + /* Get the APB4 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB4CLKDivider = (uint32_t)(RCC->D3CFGR & RCC_D3CFGR_D3PPRE); +#else + /* Get the SYSCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKDivider = (uint32_t)(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE); + + /* Get the D1HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE); + + /* Get the APB3 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB3CLKDivider = (uint32_t)(RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)(RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE2); + + /* Get the APB4 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB4CLKDivider = (uint32_t)(RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE); +#endif + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +} + +/** + * @brief This function handles the RCC CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF flag */ + if (__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief RCC Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c new file mode 100644 index 0000000..b771887 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c @@ -0,0 +1,3935 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_defines RCCEx Private Defines + * @{ + */ +#define PLL2_TIMEOUT_VALUE PLL_TIMEOUT_VALUE /* 2 ms */ +#define PLL3_TIMEOUT_VALUE PLL_TIMEOUT_VALUE /* 2 ms */ + +#define DIVIDER_P_UPDATE 0U +#define DIVIDER_Q_UPDATE 1U +#define DIVIDER_R_UPDATE 2U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static HAL_StatusTypeDef RCCEx_PLL2_Config(RCC_PLL2InitTypeDef *pll2, uint32_t Divider); +static HAL_StatusTypeDef RCCEx_PLL3_Config(RCC_PLL3InitTypeDef *pll3, uint32_t Divider); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals + * clocks (SDMMC, CKPER, FMC, QSPI*, OSPI*, DSI, SPI45, SPDIF, DFSDM1, DFSDM2*, FDCAN, SWPMI, SAI23*,SAI2A*, SAI2B*, SAI1, SPI123, + * USART234578, USART16 (USART16910*), RNG, HRTIM1*, I2C123 (I2C1235*), USB, CEC, LPTIM1, LPUART1, I2C4, LPTIM2, LPTIM345, ADC, + * SAI4A*, SAI4B*, SPI6, RTC). + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) are set to their reset values. + * + * (*) : Available on some STM32H7 lines only. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpreg; + uint32_t tickstart; + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /*---------------------------- SPDIFRX configuration -------------------------------*/ + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) + { + + switch (PeriphClkInit->SpdifrxClockSelection) + { + case RCC_SPDIFRXCLKSOURCE_PLL: /* PLL is used as clock source for SPDIFRX*/ + /* Enable PLL1Q Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_PLL2: /* PLL2 is used as clock source for SPDIFRX*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_PLL3: /* PLL3 is used as clock source for SPDIFRX*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_HSI: + /* Internal OSC clock is used as source of SPDIFRX clock*/ + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPDIFRX clock*/ + __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifrxClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SAI1 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) + { + switch (PeriphClkInit->Sai1ClockSelection) + { + case RCC_SAI1CLKSOURCE_PLL: /* PLL is used as clock source for SAI1*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI1*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI1*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PIN: + /* External clock is used as source of SAI1 clock*/ + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI1 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI1 clock*/ + __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(SAI3) + /*---------------------------- SAI2/3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI23) == RCC_PERIPHCLK_SAI23) + { + switch (PeriphClkInit->Sai23ClockSelection) + { + case RCC_SAI23CLKSOURCE_PLL: /* PLL is used as clock source for SAI2/3 */ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2/3 */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2/3 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PIN: + /* External clock is used as source of SAI2/3 clock*/ + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2/3 clock */ + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2/3 clock*/ + __HAL_RCC_SAI23_CONFIG(PeriphClkInit->Sai23ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) + /*---------------------------- SAI2A configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2A) == RCC_PERIPHCLK_SAI2A) + { + switch (PeriphClkInit->Sai2AClockSelection) + { + case RCC_SAI2ACLKSOURCE_PLL: /* PLL is used as clock source for SAI2A */ + /* Enable SAI2A Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2A */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2A */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PIN: + /* External clock is used as source of SAI2A clock*/ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2A clock */ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI2A clock */ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2A clock*/ + __HAL_RCC_SAI2A_CONFIG(PeriphClkInit->Sai2AClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI2A*/ + +#if defined(RCC_CDCCIP1R_SAI2BSEL) + + /*---------------------------- SAI2B configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2B) == RCC_PERIPHCLK_SAI2B) + { + switch (PeriphClkInit->Sai2BClockSelection) + { + case RCC_SAI2BCLKSOURCE_PLL: /* PLL is used as clock source for SAI2B */ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2B */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2B */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PIN: + /* External clock is used as source of SAI2B clock*/ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2B clock */ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI2B clock */ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2B clock*/ + __HAL_RCC_SAI2B_CONFIG(PeriphClkInit->Sai2BClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI2B*/ + +#if defined(SAI4) + /*---------------------------- SAI4A configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI4A) == RCC_PERIPHCLK_SAI4A) + { + switch (PeriphClkInit->Sai4AClockSelection) + { + case RCC_SAI4ACLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PIN: + /* External clock is used as source of SAI2 clock*/ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + +#if defined(RCC_VER_3_0) + case RCC_SAI4ACLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI4A clock */ + /* SAI4A clock source configuration done later after clock selection check */ + break; +#endif /* RCC_VER_3_0 */ + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI4A clock*/ + __HAL_RCC_SAI4A_CONFIG(PeriphClkInit->Sai4AClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + /*---------------------------- SAI4B configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI4B) == RCC_PERIPHCLK_SAI4B) + { + switch (PeriphClkInit->Sai4BClockSelection) + { + case RCC_SAI4BCLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PIN: + /* External clock is used as source of SAI2 clock*/ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + +#if defined(RCC_VER_3_0) + case RCC_SAI4BCLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI4B clock */ + /* SAI4B clock source configuration done later after clock selection check */ + break; +#endif /* RCC_VER_3_0 */ + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI4B clock*/ + __HAL_RCC_SAI4B_CONFIG(PeriphClkInit->Sai4BClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI4*/ + +#if defined(QUADSPI) + /*---------------------------- QSPI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_QSPI) == RCC_PERIPHCLK_QSPI) + { + switch (PeriphClkInit->QspiClockSelection) + { + case RCC_QSPICLKSOURCE_PLL: /* PLL is used as clock source for QSPI*/ + /* Enable QSPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* QSPI clock source configuration done later after clock selection check */ + break; + + case RCC_QSPICLKSOURCE_PLL2: /* PLL2 is used as clock source for QSPI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* QSPI clock source configuration done later after clock selection check */ + break; + + + case RCC_QSPICLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of QSPI clock */ + /* QSPI clock source configuration done later after clock selection check */ + break; + + case RCC_QSPICLKSOURCE_D1HCLK: + /* Domain1 HCLK clock selected as QSPI kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of QSPI clock*/ + __HAL_RCC_QSPI_CONFIG(PeriphClkInit->QspiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*QUADSPI*/ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + /*---------------------------- OCTOSPI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) + { + switch (PeriphClkInit->OspiClockSelection) + { + case RCC_OSPICLKSOURCE_PLL: /* PLL is used as clock source for OSPI*/ + /* Enable OSPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* OSPI clock source configuration done later after clock selection check */ + break; + + case RCC_OSPICLKSOURCE_PLL2: /* PLL2 is used as clock source for OSPI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* OSPI clock source configuration done later after clock selection check */ + break; + + + case RCC_OSPICLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of OSPI clock */ + /* OSPI clock source configuration done later after clock selection check */ + break; + + case RCC_OSPICLKSOURCE_HCLK: + /* HCLK clock selected as OSPI kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of OSPI clock*/ + __HAL_RCC_OSPI_CONFIG(PeriphClkInit->OspiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*OCTOSPI*/ + + /*---------------------------- SPI1/2/3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI123) == RCC_PERIPHCLK_SPI123) + { + switch (PeriphClkInit->Spi123ClockSelection) + { + case RCC_SPI123CLKSOURCE_PLL: /* PLL is used as clock source for SPI1/2/3 */ + /* Enable SPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI1/2/3 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI1/2/3 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PIN: + /* External clock is used as source of SPI1/2/3 clock*/ + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SPI1/2/3 clock */ + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI1/2/3 clock*/ + __HAL_RCC_SPI123_CONFIG(PeriphClkInit->Spi123ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI4/5 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI45) == RCC_PERIPHCLK_SPI45) + { + switch (PeriphClkInit->Spi45ClockSelection) + { + case RCC_SPI45CLKSOURCE_PCLK2: /* CD/D2 PCLK2 as clock source for SPI4/5 */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI4/5 */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + case RCC_SPI45CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI4/5 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of SPI4/5 clock*/ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of SPI4/5 clock */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_HSE: + /* HSE, oscillator is used as source of SPI4/5 clock */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI4/5 clock*/ + __HAL_RCC_SPI45_CONFIG(PeriphClkInit->Spi45ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI6 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI6) == RCC_PERIPHCLK_SPI6) + { + switch (PeriphClkInit->Spi6ClockSelection) + { + case RCC_SPI6CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for SPI6*/ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI6*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* SPI6 clock source configuration done later after clock selection check */ + break; + case RCC_SPI6CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI6*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of SPI6 clock*/ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_HSE: + /* HSE, oscillator is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; +#if defined(RCC_SPI6CLKSOURCE_PIN) + case RCC_SPI6CLKSOURCE_PIN: + /* 2S_CKIN is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; +#endif + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI6 clock*/ + __HAL_RCC_SPI6_CONFIG(PeriphClkInit->Spi6ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(DSI) + /*---------------------------- DSI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DSI) == RCC_PERIPHCLK_DSI) + { + switch (PeriphClkInit->DsiClockSelection) + { + + case RCC_DSICLKSOURCE_PLL2: /* PLL2 is used as clock source for DSI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* DSI clock source configuration done later after clock selection check */ + break; + + case RCC_DSICLKSOURCE_PHY: + /* PHY is used as clock source for DSI*/ + /* DSI clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of DSI clock*/ + __HAL_RCC_DSI_CONFIG(PeriphClkInit->DsiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*DSI*/ + +#if defined(FDCAN1) || defined(FDCAN2) + /*---------------------------- FDCAN configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) + { + switch (PeriphClkInit->FdcanClockSelection) + { + case RCC_FDCANCLKSOURCE_PLL: /* PLL is used as clock source for FDCAN*/ + /* Enable FDCAN Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* FDCAN clock source configuration done later after clock selection check */ + break; + + case RCC_FDCANCLKSOURCE_PLL2: /* PLL2 is used as clock source for FDCAN*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* FDCAN clock source configuration done later after clock selection check */ + break; + + case RCC_FDCANCLKSOURCE_HSE: + /* HSE is used as clock source for FDCAN*/ + /* FDCAN clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of FDCAN clock*/ + __HAL_RCC_FDCAN_CONFIG(PeriphClkInit->FdcanClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*FDCAN1 || FDCAN2*/ + + /*---------------------------- FMC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMC) == RCC_PERIPHCLK_FMC) + { + switch (PeriphClkInit->FmcClockSelection) + { + case RCC_FMCCLKSOURCE_PLL: /* PLL is used as clock source for FMC*/ + /* Enable FMC Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* FMC clock source configuration done later after clock selection check */ + break; + + case RCC_FMCCLKSOURCE_PLL2: /* PLL2 is used as clock source for FMC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* FMC clock source configuration done later after clock selection check */ + break; + + + case RCC_FMCCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of FMC clock */ + /* FMC clock source configuration done later after clock selection check */ + break; + + case RCC_FMCCLKSOURCE_HCLK: + /* D1/CD HCLK clock selected as FMC kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of FMC clock*/ + __HAL_RCC_FMC_CONFIG(PeriphClkInit->FmcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- RTC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while ((PWR->CR1 & PWR_CR1_DBP) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if (ret == HAL_OK) + { + /* Reset the Backup domain only if the RTC Clock source selection is modified */ + if ((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg; + } + + /* If LSE is selected as RTC clock source (and enabled prior to Backup Domain reset), wait for LSE reactivation */ + if (PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if (ret == HAL_OK) + { + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + } + + + /*-------------------------- USART1/6 configuration --------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART16) == RCC_PERIPHCLK_USART16) + { + switch (PeriphClkInit->Usart16ClockSelection) + { + case RCC_USART16CLKSOURCE_PCLK2: /* CD/D2 PCLK2 as clock source for USART1/6 */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_PLL2: /* PLL2 is used as clock source for USART1/6 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_PLL3: /* PLL3 is used as clock source for USART1/6 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_LSE: + /* LSE, oscillator is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USART1/6 clock */ + __HAL_RCC_USART16_CONFIG(PeriphClkInit->Usart16ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- USART2/3/4/5/7/8 Configuration --------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART234578) == RCC_PERIPHCLK_USART234578) + { + switch (PeriphClkInit->Usart234578ClockSelection) + { + case RCC_USART234578CLKSOURCE_PCLK1: /* CD/D2 PCLK1 as clock source for USART2/3/4/5/7/8 */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_PLL2: /* PLL2 is used as clock source for USART2/3/4/5/7/8 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_PLL3: /* PLL3 is used as clock source for USART2/3/4/5/7/8 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_LSE: + /* LSE, oscillator is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USART2/3/4/5/7/8 clock */ + __HAL_RCC_USART234578_CONFIG(PeriphClkInit->Usart234578ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- LPUART1 Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + switch (PeriphClkInit->Lpuart1ClockSelection) + { + case RCC_LPUART1CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPUART1 */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPUART1 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPUART1 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_LSE: + /* LSE, oscillator is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPUART1 clock */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM1 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) + { + switch (PeriphClkInit->Lptim1ClockSelection) + { + case RCC_LPTIM1CLKSOURCE_PCLK1: /* CD/D2 PCLK1 as clock source for LPTIM1*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM1*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM1*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM1 clock*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM1 clock*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM1CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM1 clock */ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM1 clock*/ + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM2 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) + { + switch (PeriphClkInit->Lptim2ClockSelection) + { + case RCC_LPTIM2CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPTIM2*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM2 clock*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM2 clock*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM2CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM2 clock */ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM2 clock*/ + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM345 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM345) == RCC_PERIPHCLK_LPTIM345) + { + switch (PeriphClkInit->Lptim345ClockSelection) + { + + case RCC_LPTIM345CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPTIM3/4/5 */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM3/4/5 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM3/4/5 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM345CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM3/4/5 clock */ + __HAL_RCC_LPTIM345_CONFIG(PeriphClkInit->Lptim345ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ I2C1/2/3/5* Configuration ------------------------*/ +#if defined(I2C5) + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1235) == RCC_PERIPHCLK_I2C1235) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1235CLKSOURCE(PeriphClkInit->I2c1235ClockSelection)); + + if ((PeriphClkInit->I2c1235ClockSelection) == RCC_I2C1235CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C1235_CONFIG(PeriphClkInit->I2c1235ClockSelection); + + } +#else + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C123) == RCC_PERIPHCLK_I2C123) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C123CLKSOURCE(PeriphClkInit->I2c123ClockSelection)); + + if ((PeriphClkInit->I2c123ClockSelection) == RCC_I2C123CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C123_CONFIG(PeriphClkInit->I2c123ClockSelection); + + } +#endif /* I2C5 */ + + /*------------------------------ I2C4 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); + + if ((PeriphClkInit->I2c4ClockSelection) == RCC_I2C4CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); + + } + + /*---------------------------- ADC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + switch (PeriphClkInit->AdcClockSelection) + { + + case RCC_ADCCLKSOURCE_PLL2: /* PLL2 is used as clock source for ADC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* ADC clock source configuration done later after clock selection check */ + break; + + case RCC_ADCCLKSOURCE_PLL3: /* PLL3 is used as clock source for ADC*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* ADC clock source configuration done later after clock selection check */ + break; + + case RCC_ADCCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of ADC clock */ + /* ADC clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of ADC clock*/ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ USB Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + + switch (PeriphClkInit->UsbClockSelection) + { + case RCC_USBCLKSOURCE_PLL: /* PLL is used as clock source for USB*/ + /* Enable USB Clock output generated form System USB . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* USB clock source configuration done later after clock selection check */ + break; + + case RCC_USBCLKSOURCE_PLL3: /* PLL3 is used as clock source for USB*/ + + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + + /* USB clock source configuration done later after clock selection check */ + break; + + case RCC_USBCLKSOURCE_HSI48: + /* HSI48 oscillator is used as source of USB clock */ + /* USB clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USB clock*/ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + + } + + /*------------------------------------- SDMMC Configuration ------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC) == RCC_PERIPHCLK_SDMMC) + { + /* Check the parameters */ + assert_param(IS_RCC_SDMMC(PeriphClkInit->SdmmcClockSelection)); + + switch (PeriphClkInit->SdmmcClockSelection) + { + case RCC_SDMMCCLKSOURCE_PLL: /* PLL is used as clock source for SDMMC*/ + /* Enable SDMMC Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SDMMC clock source configuration done later after clock selection check */ + break; + + case RCC_SDMMCCLKSOURCE_PLL2: /* PLL2 is used as clock source for SDMMC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* SDMMC clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SDMMC clock*/ + __HAL_RCC_SDMMC_CONFIG(PeriphClkInit->SdmmcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(LTDC) + /*-------------------------------------- LTDC Configuration -----------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } +#endif /* LTDC */ + + /*------------------------------ RNG Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) + { + + switch (PeriphClkInit->RngClockSelection) + { + case RCC_RNGCLKSOURCE_PLL: /* PLL is used as clock source for RNG*/ + /* Enable RNG Clock output generated form System RNG . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* RNG clock source configuration done later after clock selection check */ + break; + + case RCC_RNGCLKSOURCE_LSE: /* LSE is used as clock source for RNG*/ + + /* RNG clock source configuration done later after clock selection check */ + break; + + case RCC_RNGCLKSOURCE_LSI: /* LSI is used as clock source for RNG*/ + + /* RNG clock source configuration done later after clock selection check */ + break; + case RCC_RNGCLKSOURCE_HSI48: + /* HSI48 oscillator is used as source of RNG clock */ + /* RNG clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of RNG clock*/ + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + + } + + /*------------------------------ SWPMI1 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) + { + /* Check the parameters */ + assert_param(IS_RCC_SWPMI1CLKSOURCE(PeriphClkInit->Swpmi1ClockSelection)); + + /* Configure the SWPMI1 interface clock source */ + __HAL_RCC_SWPMI1_CONFIG(PeriphClkInit->Swpmi1ClockSelection); + } +#if defined(HRTIM1) + /*------------------------------ HRTIM1 clock Configuration ----------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_HRTIM1) == RCC_PERIPHCLK_HRTIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_HRTIM1CLKSOURCE(PeriphClkInit->Hrtim1ClockSelection)); + + /* Configure the HRTIM1 clock source */ + __HAL_RCC_HRTIM1_CONFIG(PeriphClkInit->Hrtim1ClockSelection); + } +#endif /*HRTIM1*/ + /*------------------------------ DFSDM1 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); + + /* Configure the DFSDM1 interface clock source */ + __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); + } + +#if defined(DFSDM2_BASE) + /*------------------------------ DFSDM2 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2) == RCC_PERIPHCLK_DFSDM2) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM2CLKSOURCE(PeriphClkInit->Dfsdm2ClockSelection)); + + /* Configure the DFSDM2 interface clock source */ + __HAL_RCC_DFSDM2_CONFIG(PeriphClkInit->Dfsdm2ClockSelection); + } +#endif /* DFSDM2 */ + + /*------------------------------------ TIM configuration --------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) + { + /* Check the parameters */ + assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection)); + + /* Configure Timer Prescaler */ + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } + + /*------------------------------------ CKPER configuration --------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CKPER) == RCC_PERIPHCLK_CKPER) + { + /* Check the parameters */ + assert_param(IS_RCC_CLKPSOURCE(PeriphClkInit->CkperClockSelection)); + + /* Configure the CKPER clock source */ + __HAL_RCC_CLKP_CONFIG(PeriphClkInit->CkperClockSelection); + } + + /*------------------------------ CEC Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC interface clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } + + /*---------------------------- PLL2 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVP) == RCC_PERIPHCLK_PLL2_DIVP) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVQ) == RCC_PERIPHCLK_PLL2_DIVQ) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVR) == RCC_PERIPHCLK_PLL2_DIVR) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + /*---------------------------- PLL3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVP) == RCC_PERIPHCLK_PLL3_DIVP) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVQ) == RCC_PERIPHCLK_PLL3_DIVQ) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVR) == RCC_PERIPHCLK_PLL3_DIVR) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + if (status == HAL_OK) + { + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks : + * (SDMMC, CKPER, FMC, QSPI*, OSPI*, DSI*, SPI45, SPDIF, DFSDM1, DFSDM2*, FDCAN, SWPMI, SAI23*, SAI1, SPI123, + * USART234578, USART16, RNG, HRTIM1*, I2C123 (I2C1235*), USB, CEC, LPTIM1, LPUART1, I2C4, LPTIM2, LPTIM345, ADC. + * SAI4A*, SAI4B*, SPI6, RTC, TIM). + * @retval None + * + * (*) : Available on some STM32H7 lines only. + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = + RCC_PERIPHCLK_USART16 | RCC_PERIPHCLK_USART234578 | RCC_PERIPHCLK_LPUART1 | + RCC_PERIPHCLK_I2C4 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_LPTIM345 | + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SPI123 | RCC_PERIPHCLK_SPI45 | RCC_PERIPHCLK_SPI6 | + RCC_PERIPHCLK_FDCAN | RCC_PERIPHCLK_SDMMC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_USB | + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_RTC | + RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMC | RCC_PERIPHCLK_SPDIFRX | RCC_PERIPHCLK_TIM | + RCC_PERIPHCLK_CKPER; + +#if defined(I2C5) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C1235; +#else + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C123; +#endif /*I2C5*/ +#if defined(RCC_CDCCIP1R_SAI2ASEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI2A; +#endif /* RCC_CDCCIP1R_SAI2ASEL */ +#if defined(RCC_CDCCIP1R_SAI2BSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI2B; +#endif /* RCC_CDCCIP1R_SAI2BSEL */ +#if defined(SAI3) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI23; +#endif /* SAI3 */ +#if defined(SAI4) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI4A; + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI4B; +#endif /* SAI4 */ +#if defined(DFSDM2_BASE) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_DFSDM2; +#endif /* DFSDM2 */ +#if defined(QUADSPI) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_QSPI; +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_OSPI; +#endif /* OCTOSPI1 || OCTOSPI2 */ +#if defined(HRTIM1) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_HRTIM1; +#endif /* HRTIM1 */ +#if defined(LTDC) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LTDC; +#endif /* LTDC */ +#if defined(DSI) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_DSI; +#endif /* DSI */ + + /* Get the PLL3 Clock configuration -----------------------------------------------*/ + PeriphClkInit->PLL3.PLL3M = (uint32_t)((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM3) >> RCC_PLLCKSELR_DIVM3_Pos); + PeriphClkInit->PLL3.PLL3N = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_N3) >> RCC_PLL3DIVR_N3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3R = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_R3) >> RCC_PLL3DIVR_R3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3P = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_P3) >> RCC_PLL3DIVR_P3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3Q = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_Q3) >> RCC_PLL3DIVR_Q3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3RGE = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL3RGE) >> RCC_PLLCFGR_PLL3RGE_Pos); + PeriphClkInit->PLL3.PLL3VCOSEL = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL3VCOSEL) >> RCC_PLLCFGR_PLL3VCOSEL_Pos); + + /* Get the PLL2 Clock configuration -----------------------------------------------*/ + PeriphClkInit->PLL2.PLL2M = (uint32_t)((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM2) >> RCC_PLLCKSELR_DIVM2_Pos); + PeriphClkInit->PLL2.PLL2N = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_N2) >> RCC_PLL2DIVR_N2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2R = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_R2) >> RCC_PLL2DIVR_R2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2P = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_P2) >> RCC_PLL2DIVR_P2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2Q = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_Q2) >> RCC_PLL2DIVR_Q2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2RGE = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL2RGE) >> RCC_PLLCFGR_PLL2RGE_Pos); + PeriphClkInit->PLL2.PLL2VCOSEL = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL2VCOSEL) >> RCC_PLLCFGR_PLL2VCOSEL_Pos); + + /* Get the USART1 configuration --------------------------------------------*/ + PeriphClkInit->Usart16ClockSelection = __HAL_RCC_GET_USART16_SOURCE(); + /* Get the USART2/3/4/5/7/8 clock source -----------------------------------*/ + PeriphClkInit->Usart234578ClockSelection = __HAL_RCC_GET_USART234578_SOURCE(); + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); +#if defined(I2C5) + /* Get the I2C1/2/3/5 clock source -----------------------------------------*/ + PeriphClkInit->I2c1235ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#else + /* Get the I2C1/2/3 clock source -------------------------------------------*/ + PeriphClkInit->I2c123ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#endif /*I2C5*/ + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); + /* Get the LPTIM2 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); + /* Get the LPTIM3/4/5 clock source -----------------------------------------*/ + PeriphClkInit->Lptim345ClockSelection = __HAL_RCC_GET_LPTIM345_SOURCE(); + /* Get the SAI1 clock source -----------------------------------------------*/ + PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); +#if defined(SAI3) + /* Get the SAI2/3 clock source ---------------------------------------------*/ + PeriphClkInit->Sai23ClockSelection = __HAL_RCC_GET_SAI23_SOURCE(); +#endif /*SAI3*/ +#if defined(RCC_CDCCIP1R_SAI2ASEL_0) + /* Get the SAI2A clock source ---------------------------------------------*/ + PeriphClkInit->Sai2AClockSelection = __HAL_RCC_GET_SAI2A_SOURCE(); +#endif /*SAI2A*/ +#if defined(RCC_CDCCIP1R_SAI2BSEL_0) + /* Get the SAI2B clock source ---------------------------------------------*/ + PeriphClkInit->Sai2BClockSelection = __HAL_RCC_GET_SAI2B_SOURCE(); +#endif /*SAI2B*/ +#if defined(SAI4) + /* Get the SAI4A clock source ----------------------------------------------*/ + PeriphClkInit->Sai4AClockSelection = __HAL_RCC_GET_SAI4A_SOURCE(); + /* Get the SAI4B clock source ----------------------------------------------*/ + PeriphClkInit->Sai4BClockSelection = __HAL_RCC_GET_SAI4B_SOURCE(); +#endif /*SAI4*/ + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + /* Get the USB clock source ------------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); + /* Get the SDMMC clock source ----------------------------------------------*/ + PeriphClkInit->SdmmcClockSelection = __HAL_RCC_GET_SDMMC_SOURCE(); + /* Get the RNG clock source ------------------------------------------------*/ + PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); +#if defined(HRTIM1) + /* Get the HRTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Hrtim1ClockSelection = __HAL_RCC_GET_HRTIM1_SOURCE(); +#endif /* HRTIM1 */ + /* Get the ADC clock source ------------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); + /* Get the SWPMI1 clock source ---------------------------------------------*/ + PeriphClkInit->Swpmi1ClockSelection = __HAL_RCC_GET_SWPMI1_SOURCE(); + /* Get the DFSDM1 clock source ---------------------------------------------*/ + PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); +#if defined(DFSDM2_BASE) + /* Get the DFSDM2 clock source ---------------------------------------------*/ + PeriphClkInit->Dfsdm2ClockSelection = __HAL_RCC_GET_DFSDM2_SOURCE(); +#endif /* DFSDM2 */ + /* Get the SPDIFRX clock source --------------------------------------------*/ + PeriphClkInit->SpdifrxClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE(); + /* Get the SPI1/2/3 clock source -------------------------------------------*/ + PeriphClkInit->Spi123ClockSelection = __HAL_RCC_GET_SPI123_SOURCE(); + /* Get the SPI4/5 clock source ---------------------------------------------*/ + PeriphClkInit->Spi45ClockSelection = __HAL_RCC_GET_SPI45_SOURCE(); + /* Get the SPI6 clock source -----------------------------------------------*/ + PeriphClkInit->Spi6ClockSelection = __HAL_RCC_GET_SPI6_SOURCE(); + /* Get the FDCAN clock source ----------------------------------------------*/ + PeriphClkInit->FdcanClockSelection = __HAL_RCC_GET_FDCAN_SOURCE(); + /* Get the CEC clock source ------------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); + /* Get the FMC clock source ------------------------------------------------*/ + PeriphClkInit->FmcClockSelection = __HAL_RCC_GET_FMC_SOURCE(); +#if defined(QUADSPI) + /* Get the QSPI clock source -----------------------------------------------*/ + PeriphClkInit->QspiClockSelection = __HAL_RCC_GET_QSPI_SOURCE(); +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) + /* Get the OSPI clock source -----------------------------------------------*/ + PeriphClkInit->OspiClockSelection = __HAL_RCC_GET_OSPI_SOURCE(); +#endif /* OCTOSPI1 || OCTOSPI2 */ + +#if defined(DSI) + /* Get the DSI clock source ------------------------------------------------*/ + PeriphClkInit->DsiClockSelection = __HAL_RCC_GET_DSI_SOURCE(); +#endif /*DSI*/ + + /* Get the CKPER clock source ----------------------------------------------*/ + PeriphClkInit->CkperClockSelection = __HAL_RCC_GET_CLKP_SOURCE(); + + /* Get the TIM Prescaler configuration -------------------------------------*/ + if ((RCC->CFGR & RCC_CFGR_TIMPRE) == 0U) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral(SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk: Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_SAI1 : SAI1 peripheral clock + * @arg RCC_PERIPHCLK_SAI23 : SAI2/3 peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI2A : SAI2A peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI2B : SAI2B peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI4A : SAI4A peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI4B : SAI4B peripheral clock (*) + * @arg RCC_PERIPHCLK_SPI123: SPI1/2/3 peripheral clock + * @arg RCC_PERIPHCLK_ADC : ADC peripheral clock + * @arg RCC_PERIPHCLK_SDMMC : SDMMC peripheral clock + * @arg RCC_PERIPHCLK_SPI6 : SPI6 peripheral clock + * @retval Frequency in KHz + * + * (*) : Available on some STM32H7 lines only. + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint64_t PeriphClk) +{ + PLL1_ClocksTypeDef pll1_clocks; + PLL2_ClocksTypeDef pll2_clocks; + PLL3_ClocksTypeDef pll3_clocks; + + /* This variable is used to store the clock frequency (value in Hz) */ + uint32_t frequency; + /* This variable is used to store the SAI and CKP clock source */ + uint32_t saiclocksource; + uint32_t ckpclocksource; + uint32_t srcclk; + + if (PeriphClk == RCC_PERIPHCLK_SAI1) + { + + saiclocksource = __HAL_RCC_GET_SAI1_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI1CLKSOURCE_PLL: /* PLL1 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI1CLKSOURCE_PLL2: /* PLL2 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI1CLKSOURCE_PLL3: /* PLL3 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI1CLKSOURCE_CLKP: /* CKPER is the clock source for SAI1*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI1CLKSOURCE_PIN): /* External clock is the clock source for SAI1 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } + +#if defined(SAI3) + else if (PeriphClk == RCC_PERIPHCLK_SAI23) + { + + saiclocksource = __HAL_RCC_GET_SAI23_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI23CLKSOURCE_PLL: /* PLL1 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI23CLKSOURCE_PLL2: /* PLL2 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI23CLKSOURCE_PLL3: /* PLL3 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI23CLKSOURCE_CLKP: /* CKPER is the clock source for SAI2/3 */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI23CLKSOURCE_PIN): /* External clock is the clock source for SAI2/3 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) + + else if (PeriphClk == RCC_PERIPHCLK_SAI2A) + { + saiclocksource = __HAL_RCC_GET_SAI2A_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI2ACLKSOURCE_PLL: /* PLL1 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI2ACLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2ACLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2ACLKSOURCE_CLKP: /* CKPER is the clock source for SAI2A */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI2ACLKSOURCE_PIN): /* External clock is the clock source for SAI2A */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + + } +#endif + +#if defined(RCC_CDCCIP1R_SAI2BSEL_0) + else if (PeriphClk == RCC_PERIPHCLK_SAI2B) + { + + saiclocksource = __HAL_RCC_GET_SAI2B_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI2BCLKSOURCE_PLL: /* PLL1 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI2BCLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2BCLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2BCLKSOURCE_CLKP: /* CKPER is the clock source for SAI2B*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + break; + } + + case (RCC_SAI2BCLKSOURCE_PIN): /* External clock is the clock source for SAI2B */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } +#endif + +#if defined(SAI4) + else if (PeriphClk == RCC_PERIPHCLK_SAI4A) + { + + saiclocksource = __HAL_RCC_GET_SAI4A_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI4ACLKSOURCE_PLL: /* PLL1 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI4ACLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4ACLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4ACLKSOURCE_CLKP: /* CKPER is the clock source for SAI4A*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case RCC_SAI4ACLKSOURCE_PIN: /* External clock is the clock source for SAI4A */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } + + else if (PeriphClk == RCC_PERIPHCLK_SAI4B) + { + + saiclocksource = __HAL_RCC_GET_SAI4B_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI4BCLKSOURCE_PLL: /* PLL1 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI4BCLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4BCLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4BCLKSOURCE_CLKP: /* CKPER is the clock source for SAI4B*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case RCC_SAI4BCLKSOURCE_PIN: /* External clock is the clock source for SAI4B */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } +#endif /*SAI4*/ + else if (PeriphClk == RCC_PERIPHCLK_SPI123) + { + /* Get SPI1/2/3 clock source */ + srcclk = __HAL_RCC_GET_SPI123_SOURCE(); + + switch (srcclk) + { + case RCC_SPI123CLKSOURCE_PLL: /* PLL1 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI123CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SPI123CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SPI123CLKSOURCE_CLKP: /* CKPER is the clock source for SPI123 */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SPI123CLKSOURCE_PIN): /* External clock is the clock source for I2S */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SPI45) + { + /* Get SPI45 clock source */ + srcclk = __HAL_RCC_GET_SPI45_SOURCE(); + switch (srcclk) + { + case RCC_SPI45CLKSOURCE_PCLK2: /* CD/D2 PCLK2 is the clock source for SPI4/5 */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + break; + } + case RCC_SPI45CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_HSI: /* HSI is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_CSI: /* CSI is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) + { + frequency = CSI_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_HSE: /* HSE is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_ADC) + { + /* Get ADC clock source */ + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + switch (srcclk) + { + case RCC_ADCCLKSOURCE_PLL2: + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_ADCCLKSOURCE_PLL3: + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_R_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_ADCCLKSOURCE_CLKP: + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SDMMC) + { + /* Get SDMMC clock source */ + srcclk = __HAL_RCC_GET_SDMMC_SOURCE(); + + switch (srcclk) + { + case RCC_SDMMCCLKSOURCE_PLL: /* PLL1 is the clock source for SDMMC */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SDMMCCLKSOURCE_PLL2: /* PLL2 is the clock source for SDMMC */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_R_Frequency; + } + else + { + frequency = 0; + } + break; + } + + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SPI6) + { + /* Get SPI6 clock source */ + srcclk = __HAL_RCC_GET_SPI6_SOURCE(); + + switch (srcclk) + { + case RCC_SPI6CLKSOURCE_D3PCLK1: /* D3PCLK1 (PCLK4) is the clock source for SPI6 */ + { + frequency = HAL_RCCEx_GetD3PCLK1Freq(); + break; + } + case RCC_SPI6CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_HSI: /* HSI is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_CSI: /* CSI is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) + { + frequency = CSI_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_HSE: /* HSE is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } +#if defined(RCC_SPI6CLKSOURCE_PIN) + case RCC_SPI6CLKSOURCE_PIN: /* External clock is the clock source for SPI6 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } +#endif /* RCC_SPI6CLKSOURCE_PIN */ + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_FDCAN) + { + /* Get FDCAN clock source */ + srcclk = __HAL_RCC_GET_FDCAN_SOURCE(); + + switch (srcclk) + { + case RCC_FDCANCLKSOURCE_HSE: /* HSE is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_FDCANCLKSOURCE_PLL: /* PLL is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_FDCANCLKSOURCE_PLL2: /* PLL2 is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + default : + { + frequency = 0; + break; + } + } + } + else + { + frequency = 0; + } + + return frequency; +} + + +/** + * @brief Returns the D1PCLK1 frequency + * @note Each time D1PCLK1 changes, this function must be called to update the + * right D1PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval D1PCLK1 frequency + */ +uint32_t HAL_RCCEx_GetD1PCLK1Freq(void) +{ +#if defined(RCC_D1CFGR_D1PPRE) + /* Get HCLK source and Compute D1PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1PPRE) >> RCC_D1CFGR_D1PPRE_Pos] & 0x1FU)); +#else + /* Get HCLK source and Compute D1PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE) >> RCC_CDCFGR1_CDPPRE_Pos] & 0x1FU)); +#endif +} + +/** + * @brief Returns the D3PCLK1 frequency + * @note Each time D3PCLK1 changes, this function must be called to update the + * right D3PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval D3PCLK1 frequency + */ +uint32_t HAL_RCCEx_GetD3PCLK1Freq(void) +{ +#if defined(RCC_D3CFGR_D3PPRE) + /* Get HCLK source and Compute D3PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->D3CFGR & RCC_D3CFGR_D3PPRE) >> RCC_D3CFGR_D3PPRE_Pos] & 0x1FU)); +#else + /* Get HCLK source and Compute D3PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE) >> RCC_SRDCFGR_SRDPPRE_Pos] & 0x1FU)); +#endif +} +/** +* @brief Returns the PLL2 clock frequencies :PLL2_P_Frequency,PLL2_R_Frequency and PLL2_Q_Frequency + * @note The PLL2 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL2CLK changes, this function must be called to update the + * right PLL2CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL2_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL2ClockFreq(PLL2_ClocksTypeDef *PLL2_Clocks) +{ + uint32_t pllsource, pll2m, pll2fracen, hsivalue; + float_t fracn2, pll2vco; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLL2M) * PLL2N + PLL2xCLK = PLL2_VCO / PLL2x + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll2m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM2) >> 12); + pll2fracen = (RCC->PLLCFGR & RCC_PLLCFGR_PLL2FRACEN) >> RCC_PLLCFGR_PLL2FRACEN_Pos; + fracn2 = (float_t)(uint32_t)(pll2fracen * ((RCC->PLL2FRACR & RCC_PLL2FRACR_FRACN2) >> 3)); + + if (pll2m != 0U) + { + switch (pllsource) + { + + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll2vco = ((float_t)hsivalue / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + } + else + { + pll2vco = ((float_t)HSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + } + break; + + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll2vco = ((float_t)CSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll2vco = ((float_t)HSE_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll2vco = ((float_t)CSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + } + PLL2_Clocks->PLL2_P_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_P2) >> 9) + (float_t)1)) ; + PLL2_Clocks->PLL2_Q_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_Q2) >> 16) + (float_t)1)) ; + PLL2_Clocks->PLL2_R_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_R2) >> 24) + (float_t)1)) ; + } + else + { + PLL2_Clocks->PLL2_P_Frequency = 0U; + PLL2_Clocks->PLL2_Q_Frequency = 0U; + PLL2_Clocks->PLL2_R_Frequency = 0U; + } +} + +/** +* @brief Returns the PLL3 clock frequencies :PLL3_P_Frequency,PLL3_R_Frequency and PLL3_Q_Frequency + * @note The PLL3 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL3CLK changes, this function must be called to update the + * right PLL3CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL3_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL3ClockFreq(PLL3_ClocksTypeDef *PLL3_Clocks) +{ + uint32_t pllsource, pll3m, pll3fracen, hsivalue; + float_t fracn3, pll3vco; + + /* PLL3_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLL3M) * PLL3N + PLL3xCLK = PLL3_VCO / PLLxR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll3m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM3) >> 20) ; + pll3fracen = (RCC->PLLCFGR & RCC_PLLCFGR_PLL3FRACEN) >> RCC_PLLCFGR_PLL3FRACEN_Pos; + fracn3 = (float_t)(uint32_t)(pll3fracen * ((RCC->PLL3FRACR & RCC_PLL3FRACR_FRACN3) >> 3)); + + if (pll3m != 0U) + { + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll3vco = ((float_t)hsivalue / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + } + else + { + pll3vco = ((float_t)HSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + } + break; + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll3vco = ((float_t)CSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll3vco = ((float_t)HSE_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll3vco = ((float_t)CSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + } + PLL3_Clocks->PLL3_P_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_P3) >> 9) + (float_t)1)) ; + PLL3_Clocks->PLL3_Q_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_Q3) >> 16) + (float_t)1)) ; + PLL3_Clocks->PLL3_R_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_R3) >> 24) + (float_t)1)) ; + } + else + { + PLL3_Clocks->PLL3_P_Frequency = 0U; + PLL3_Clocks->PLL3_Q_Frequency = 0U; + PLL3_Clocks->PLL3_R_Frequency = 0U; + } + +} + +/** +* @brief Returns the PLL1 clock frequencies :PLL1_P_Frequency,PLL1_R_Frequency and PLL1_Q_Frequency + * @note The PLL1 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL1CLK changes, this function must be called to update the + * right PLL1CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL1_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL1ClockFreq(PLL1_ClocksTypeDef *PLL1_Clocks) +{ + uint32_t pllsource, pll1m, pll1fracen, hsivalue; + float_t fracn1, pll1vco; + + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll1m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> 4); + pll1fracen = RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN; + fracn1 = (float_t)(uint32_t)(pll1fracen * ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> 3)); + + if (pll1m != 0U) + { + switch (pllsource) + { + + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll1vco = ((float_t)hsivalue / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + else + { + pll1vco = ((float_t)HSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + break; + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll1vco = ((float_t)CSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll1vco = ((float_t)HSE_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll1vco = ((float_t)HSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + } + + PLL1_Clocks->PLL1_P_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >> 9) + (float_t)1)) ; + PLL1_Clocks->PLL1_Q_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_Q1) >> 16) + (float_t)1)) ; + PLL1_Clocks->PLL1_R_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_R1) >> 24) + (float_t)1)) ; + } + else + { + PLL1_Clocks->PLL1_P_Frequency = 0U; + PLL1_Clocks->PLL1_Q_Frequency = 0U; + PLL1_Clocks->PLL1_R_Frequency = 0U; + } + +} + +/** + * @brief Returns the main System frequency + * @note Each time System clock changes, this function must be called to update the + * right core clock value. Otherwise, any configuration based on this function will be incorrect. + * @note The SystemCoreClock CMSIS variable is used to store System current Core Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCCEx_GetD1SysClockFreq(void) +{ + uint32_t common_system_clock; + +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos] & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos] & 0x1FU); +#endif + + /* Update the SystemD2Clock global variable */ +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + return common_system_clock; +} +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended System Control functions + * @brief Extended Peripheral Control functions + * @{ + */ +/** + * @brief Enables the LSE Clock Security System. + * @note Prior to enable the LSE Clock Security System, LSE oscillator is to be enabled + * with HAL_RCC_OscConfig() and the LSE oscillator clock is to be selected as RTC + * clock with HAL_RCCEx_PeriphCLKConfig(). + * @retval None + */ +void HAL_RCCEx_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Disables the LSE Clock Security System. + * @note LSE Clock Security System can only be disabled after a LSE failure detection. + * @retval None + */ +void HAL_RCCEx_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + /* Disable LSE CSS IT if any */ + __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); +} + +/** + * @brief Enable the LSE Clock Security System Interrupt & corresponding EXTI line. + * @note LSE Clock Security System Interrupt is mapped on EXTI line 18 + * @retval None + */ +void HAL_RCCEx_EnableLSECSS_IT(void) +{ + /* Enable LSE CSS */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + + /* Enable LSE CSS IT */ + __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); + + /* Enable IT on EXTI Line 18 */ +#if defined(DUAL_CORE) && defined(CORE_CM4) + __HAL_RCC_C2_LSECSS_EXTI_ENABLE_IT(); +#else + __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); +#endif /* DUAL_CORE && CORE_CM4 */ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); +} + +/** + * @brief Configure the oscillator clock source for wakeup from Stop and CSS backup clock + * @param WakeUpClk: Wakeup clock + * This parameter can be one of the following values: + * @arg RCC_STOP_WAKEUPCLOCK_CSI: CSI oscillator selection + * @arg RCC_STOP_WAKEUPCLOCK_HSI: HSI oscillator selection + * @note This function shall not be called after the Clock Security System on HSE has been + * enabled. + * @retval None + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_WAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +/** + * @brief Configure the oscillator Kernel clock source for wakeup from Stop + * @param WakeUpClk: Kernel Wakeup clock + * This parameter can be one of the following values: + * @arg RCC_STOP_KERWAKEUPCLOCK_CSI: CSI oscillator selection + * @arg RCC_STOP_KERWAKEUPCLOCK_HSI: HSI oscillator selection + * @retval None + */ +void HAL_RCCEx_KerWakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_KERWAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_KERWAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable COREx boot independently of CMx_B option byte value + * @param RCC_BootCx: Boot Core to be enabled + * This parameter can be one of the following values: + * @arg RCC_BOOT_C1: CM7 core selection + * @arg RCC_BOOT_C2: CM4 core selection + * @note This bit can be set by software but is cleared by hardware after a system reset or STANDBY + * + * @retval None + */ +void HAL_RCCEx_EnableBootCore(uint32_t RCC_BootCx) +{ + assert_param(IS_RCC_BOOT_CORE(RCC_BootCx)); + SET_BIT(RCC->GCR, RCC_BootCx) ; +} + +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +/** + * @brief Configure WWDGx to generate a system reset not only CPUx reset(default) when a time-out occurs + * @param RCC_WWDGx: WWDGx to be configured + * This parameter can be one of the following values: + * @arg RCC_WWDG1: WWDG1 generates system reset + * @arg RCC_WWDG2: WWDG2 generates system reset + * @note This bit can be set by software but is cleared by hardware during a system reset + * + * @retval None + */ +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx) +{ + assert_param(IS_RCC_SCOPE_WWDG(RCC_WWDGx)); + SET_BIT(RCC->GCR, RCC_WWDGx) ; +} + +#else +#if defined(RCC_GCR_WW1RSC) +/** + * @brief Configure WWDG1 to generate a system reset not only CPU reset(default) when a time-out occurs + * @param RCC_WWDGx: WWDGx to be configured + * This parameter can be one of the following values: + * @arg RCC_WWDG1: WWDG1 generates system reset + * @note This bit can be set by software but is cleared by hardware during a system reset + * + * @retval None + */ +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx) +{ + assert_param(IS_RCC_SCOPE_WWDG(RCC_WWDGx)); + SET_BIT(RCC->GCR, RCC_WWDGx) ; +} +#endif +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the down-counting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the up-counting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Pre-scaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + if ((HAL_GetREVID() <= REV_ID_Y) && (pInit->Source == RCC_CRS_SYNC_SOURCE_USB2)) + { + /* Use Rev.Y value of USB2 */ + value = (pInit->Prescaler | RCC_CRS_SYNC_SOURCE_PIN | pInit->Polarity); + } + else + { + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + } + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[5:0] bits according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** +* @brief Wait for CRS Synchronization status. +* @param Timeout Duration of the time-out +* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization +* frequency. +* @note If Time-out set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. +* @retval Combination of Synchronization status +* This parameter can be a combination of the following values: +* @arg @ref RCC_CRS_TIMEOUT +* @arg @ref RCC_CRS_SYNCOK +* @arg @ref RCC_CRS_SYNCWARN +* @arg @ref RCC_CRS_SYNCERR +* @arg @ref RCC_CRS_SYNCMISS +* @arg @ref RCC_CRS_TRIMOVF +*/ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or time-out detection */ + do + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } + while (RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if (((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if (((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if (((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if (((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if ((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if ((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if ((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RCCEx_Private_functions RCCEx Private Functions + * @{ + */ +/** + * @brief Configure the PLL2 VCI,VCO ranges, multiplication and division factors and enable it + * @param pll2: Pointer to an RCC_PLL2InitTypeDef structure that + * contains the configuration parameters as well as VCI, VCO clock ranges. + * @param Divider divider parameter to be updated + * @note PLL2 is temporary disabled to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLL2_Config(RCC_PLL2InitTypeDef *pll2, uint32_t Divider) +{ + + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + assert_param(IS_RCC_PLL2M_VALUE(pll2->PLL2M)); + assert_param(IS_RCC_PLL2N_VALUE(pll2->PLL2N)); + assert_param(IS_RCC_PLL2P_VALUE(pll2->PLL2P)); + assert_param(IS_RCC_PLL2R_VALUE(pll2->PLL2R)); + assert_param(IS_RCC_PLL2Q_VALUE(pll2->PLL2Q)); + assert_param(IS_RCC_PLL2RGE_VALUE(pll2->PLL2RGE)); + assert_param(IS_RCC_PLL2VCO_VALUE(pll2->PLL2VCOSEL)); + assert_param(IS_RCC_PLLFRACN_VALUE(pll2->PLL2FRACN)); + + /* Check that PLL2 OSC clock source is already set */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_NONE) + { + return HAL_ERROR; + } + + + else + { + /* Disable PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure PLL2 multiplication and division factors. */ + __HAL_RCC_PLL2_CONFIG(pll2->PLL2M, + pll2->PLL2N, + pll2->PLL2P, + pll2->PLL2Q, + pll2->PLL2R); + + /* Select PLL2 input reference frequency range: VCI */ + __HAL_RCC_PLL2_VCIRANGE(pll2->PLL2RGE) ; + + /* Select PLL2 output frequency range : VCO */ + __HAL_RCC_PLL2_VCORANGE(pll2->PLL2VCOSEL) ; + + /* Disable PLL2FRACN . */ + __HAL_RCC_PLL2FRACN_DISABLE(); + + /* Configures PLL2 clock Fractional Part Of The Multiplication Factor */ + __HAL_RCC_PLL2FRACN_CONFIG(pll2->PLL2FRACN); + + /* Enable PLL2FRACN . */ + __HAL_RCC_PLL2FRACN_ENABLE(); + + /* Enable the PLL2 clock output */ + if (Divider == DIVIDER_P_UPDATE) + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVP); + } + else if (Divider == DIVIDER_Q_UPDATE) + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVQ); + } + else + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVR); + } + + /* Enable PLL2. */ + __HAL_RCC_PLL2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + } + + + return status; +} + + +/** + * @brief Configure the PLL3 VCI,VCO ranges, multiplication and division factors and enable it + * @param pll3: Pointer to an RCC_PLL3InitTypeDef structure that + * contains the configuration parameters as well as VCI, VCO clock ranges. + * @param Divider divider parameter to be updated + * @note PLL3 is temporary disabled to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLL3_Config(RCC_PLL3InitTypeDef *pll3, uint32_t Divider) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + assert_param(IS_RCC_PLL3M_VALUE(pll3->PLL3M)); + assert_param(IS_RCC_PLL3N_VALUE(pll3->PLL3N)); + assert_param(IS_RCC_PLL3P_VALUE(pll3->PLL3P)); + assert_param(IS_RCC_PLL3R_VALUE(pll3->PLL3R)); + assert_param(IS_RCC_PLL3Q_VALUE(pll3->PLL3Q)); + assert_param(IS_RCC_PLL3RGE_VALUE(pll3->PLL3RGE)); + assert_param(IS_RCC_PLL3VCO_VALUE(pll3->PLL3VCOSEL)); + assert_param(IS_RCC_PLLFRACN_VALUE(pll3->PLL3FRACN)); + + /* Check that PLL3 OSC clock source is already set */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_NONE) + { + return HAL_ERROR; + } + + + else + { + /* Disable PLL3. */ + __HAL_RCC_PLL3_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + /* Wait till PLL3 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL3RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL3_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the PLL3 multiplication and division factors. */ + __HAL_RCC_PLL3_CONFIG(pll3->PLL3M, + pll3->PLL3N, + pll3->PLL3P, + pll3->PLL3Q, + pll3->PLL3R); + + /* Select PLL3 input reference frequency range: VCI */ + __HAL_RCC_PLL3_VCIRANGE(pll3->PLL3RGE) ; + + /* Select PLL3 output frequency range : VCO */ + __HAL_RCC_PLL3_VCORANGE(pll3->PLL3VCOSEL) ; + + /* Disable PLL3FRACN . */ + __HAL_RCC_PLL3FRACN_DISABLE(); + + /* Configures PLL3 clock Fractional Part Of The Multiplication Factor */ + __HAL_RCC_PLL3FRACN_CONFIG(pll3->PLL3FRACN); + + /* Enable PLL3FRACN . */ + __HAL_RCC_PLL3FRACN_ENABLE(); + + /* Enable the PLL3 clock output */ + if (Divider == DIVIDER_P_UPDATE) + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVP); + } + else if (Divider == DIVIDER_Q_UPDATE) + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVQ); + } + else + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVR); + } + + /* Enable PLL3. */ + __HAL_RCC_PLL3_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL3 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL3RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL3_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + } + + + return status; +} + +/** + * @brief Handle the RCC LSE Clock Security System interrupt request. + * @retval None + */ +void HAL_RCCEx_LSECSS_IRQHandler(void) +{ + /* Check RCC LSE CSSF flag */ + if (__HAL_RCC_GET_IT(RCC_IT_LSECSS)) + { + + /* Clear RCC LSE CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); + + /* RCC LSE Clock Security System interrupt user callback */ + HAL_RCCEx_LSECSS_Callback(); + + } +} + +/** + * @brief RCCEx LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_LSECSS_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file + */ +} + + + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai.c new file mode 100644 index 0000000..6a11433 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai.c @@ -0,0 +1,2946 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sai.c + * @author MCD Application Team + * @brief SAI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Audio Interface (SAI) peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + The SAI HAL driver can be used as follows: + + (#) Declare a SAI_HandleTypeDef handle structure (eg. SAI_HandleTypeDef hsai). + (#) Initialize the SAI low level resources by implementing the HAL_SAI_MspInit() API: + (##) Enable the SAI interface clock. + (##) SAI pins configuration: + (+++) Enable the clock for the SAI GPIOs. + (+++) Configure these SAI pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT() + and HAL_SAI_Receive_IT() APIs): + (+++) Configure the SAI interrupt priority. + (+++) Enable the NVIC SAI IRQ handle. + + (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA() + and HAL_SAI_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx stream. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream. + (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Stream. + + (#) The initialization can be done by two ways + (##) Expert mode : Initialize the structures Init, FrameInit and SlotInit and call HAL_SAI_Init(). + (##) Simplified mode : Initialize the high part of Init Structure and call HAL_SAI_InitProtocol(). + + [..] + (@) The specific SAI interrupts (FIFO request and Overrun underrun interrupt) + will be managed using the macros __HAL_SAI_ENABLE_IT() and __HAL_SAI_DISABLE_IT() + inside the transmit and receive process. + [..] + (@) Make sure that either: + (+@) PLLSAI1CLK output is configured or + (+@) PLLSAI2CLK output is configured or + (+@) PLLSAI3CLK output is configured or + (+@) PLLSAI4ACLK output is configured or + (+@) PLLSAI4BCLK output is configured or + (+@) External clock source is configured after setting correctly + the define constant EXTERNAL_CLOCK_VALUE in the stm32h7xx_hal_conf.h file. + + [..] + (@) In master Tx mode: enabling the audio block immediately generates the bit clock + for the external slaves even if there is no data in the FIFO, However FS signal + generation is conditioned by the presence of data in the FIFO. + + [..] + (@) In master Rx mode: enabling the audio block immediately generates the bit clock + and FS signal for the external slaves. + + [..] + (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior: + (+@) First bit Offset <= (SLOT size - Data size) + (+@) Data size <= SLOT size + (+@) Number of SLOT x SLOT size = Frame length + (+@) The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected. + + [..] + (@) PDM interface can be activated through HAL_SAI_Init function. + Please note that PDM interface is only available for SAI1 or SAI4 sub-block A. + PDM microphone delays can be tuned with HAL_SAIEx_ConfigPdmMicDelay function. + + [..] + Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SAI_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SAI_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_SAI_Transmit_IT() + (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SAI_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_SAI_Receive_IT() + (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SAI_RxCpltCallback() + (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SAI_ErrorCallback() + + *** DMA mode IO operation *** + ============================= + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_SAI_Transmit_DMA() + (+) At transmission end of transfer HAL_SAI_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SAI_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SAI_Receive_DMA() + (+) At reception end of transfer HAL_SAI_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SAI_RxCpltCallback() + (+) In case of flag error, HAL_SAI_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SAI_ErrorCallback() + (+) Pause the DMA Transfer using HAL_SAI_DMAPause() + (+) Resume the DMA Transfer using HAL_SAI_DMAResume() + (+) Stop the DMA Transfer using HAL_SAI_DMAStop() + + *** SAI HAL driver additional function list *** + =============================================== + [..] + Below the list the others API available SAI HAL driver : + + (+) HAL_SAI_EnableTxMuteMode(): Enable the mute in tx mode + (+) HAL_SAI_DisableTxMuteMode(): Disable the mute in tx mode + (+) HAL_SAI_EnableRxMuteMode(): Enable the mute in Rx mode + (+) HAL_SAI_DisableRxMuteMode(): Disable the mute in Rx mode + (+) HAL_SAI_FlushRxFifo(): Flush the rx fifo. + (+) HAL_SAI_Abort(): Abort the current transfer + + *** SAI HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SAI HAL driver : + + (+) __HAL_SAI_ENABLE(): Enable the SAI peripheral + (+) __HAL_SAI_DISABLE(): Disable the SAI peripheral + (+) __HAL_SAI_ENABLE_IT(): Enable the specified SAI interrupts + (+) __HAL_SAI_DISABLE_IT(): Disable the specified SAI interrupts + (+) __HAL_SAI_GET_IT_SOURCE(): Check if the specified SAI interrupt source is + enabled or disabled + (+) __HAL_SAI_GET_FLAG(): Check whether the specified SAI flag is set or not + + *** Callback registration *** + ============================= + [..] + The compilation define USE_HAL_SAI_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use functions HAL_SAI_RegisterCallback() to register a user callback. + + [..] + Function HAL_SAI_RegisterCallback() allows to register following callbacks: + (+) RxCpltCallback : SAI receive complete. + (+) RxHalfCpltCallback : SAI receive half complete. + (+) TxCpltCallback : SAI transmit complete. + (+) TxHalfCpltCallback : SAI transmit half complete. + (+) ErrorCallback : SAI error. + (+) MspInitCallback : SAI MspInit. + (+) MspDeInitCallback : SAI MspDeInit. + [..] + This function takes as parameters the HAL peripheral handle, the callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_SAI_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_SAI_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the callback ID. + [..] + This function allows to reset following callbacks: + (+) RxCpltCallback : SAI receive complete. + (+) RxHalfCpltCallback : SAI receive half complete. + (+) TxCpltCallback : SAI transmit complete. + (+) TxHalfCpltCallback : SAI transmit half complete. + (+) ErrorCallback : SAI error. + (+) MspInitCallback : SAI MspInit. + (+) MspDeInitCallback : SAI MspDeInit. + + [..] + By default, after the HAL_SAI_Init and if the state is HAL_SAI_STATE_RESET + all callbacks are reset to the corresponding legacy weak functions: + examples HAL_SAI_RxCpltCallback(), HAL_SAI_ErrorCallback(). + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak functions in the HAL_SAI_Init + and HAL_SAI_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SAI_Init and HAL_SAI_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SAI_RegisterCallback before calling HAL_SAI_DeInit + or HAL_SAI_Init function. + + [..] + When the compilation define USE_HAL_SAI_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak callbacks are used. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup SAI SAI + * @brief SAI HAL module driver + * @{ + */ + +#ifdef HAL_SAI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/** @defgroup SAI_Private_Typedefs SAI Private Typedefs + * @{ + */ +typedef enum +{ + SAI_MODE_DMA, + SAI_MODE_IT +} SAI_ModeTypedef; +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/** @defgroup SAI_Private_Constants SAI Private Constants + * @{ + */ +#define SAI_DEFAULT_TIMEOUT 4U +#define SAI_LONG_TIMEOUT 1000U +#define SAI_SPDIF_FRAME_LENGTH 64U +#define SAI_AC97_FRAME_LENGTH 256U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SAI_Private_Functions SAI Private Functions + * @{ + */ +static void SAI_FillFifo(SAI_HandleTypeDef *hsai); +static uint32_t SAI_InterruptFlag(const SAI_HandleTypeDef *hsai, SAI_ModeTypedef mode); +static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); +static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); + +static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai); +static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai); +static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai); +static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai); +static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai); +static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai); +static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai); + +static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void SAI_DMAError(DMA_HandleTypeDef *hdma); +static void SAI_DMAAbort(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup SAI_Exported_Functions SAI Exported Functions + * @{ + */ + +/** @defgroup SAI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SAIx peripheral: + + (+) User must implement HAL_SAI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SAI_Init() to configure the selected device with + the selected configuration: + (++) Mode (Master/slave TX/RX) + (++) Protocol + (++) Data Size + (++) MCLK Output + (++) Audio frequency + (++) FIFO Threshold + (++) Frame Config + (++) Slot Config + (++) PDM Config + + (+) Call the function HAL_SAI_DeInit() to restore the default configuration + of the selected SAI peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the structure FrameInit, SlotInit and the low part of + * Init according to the specified parameters and call the function + * HAL_SAI_Init to initialize the SAI block. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param protocol one of the supported protocol @ref SAI_Protocol + * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize + * the configuration information for SAI module. + * @param nbslot Number of slot. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol)); + assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize)); + + switch (protocol) + { + case SAI_I2S_STANDARD : + case SAI_I2S_MSBJUSTIFIED : + case SAI_I2S_LSBJUSTIFIED : + status = SAI_InitI2S(hsai, protocol, datasize, nbslot); + break; + case SAI_PCM_LONG : + case SAI_PCM_SHORT : + status = SAI_InitPCM(hsai, protocol, datasize, nbslot); + break; + default : + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + status = HAL_SAI_Init(hsai); + } + + return status; +} + +/** + * @brief Initialize the SAI according to the specified parameters. + * in the SAI_InitTypeDef structure and initialize the associated handle. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai) +{ + uint32_t tmpregisterGCR; + uint32_t ckstr_bits; + uint32_t syncen_bits; + SAI_TypeDef *SaiBaseAddress; + + /* Check the SAI handle allocation */ + if (hsai == NULL) + { + return HAL_ERROR; + } + + /* check the instance */ + assert_param(IS_SAI_ALL_INSTANCE(hsai->Instance)); + + /* Check the SAI Block parameters */ + assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency)); + assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol)); + assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode)); + assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize)); + assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit)); + assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing)); + assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro)); +#if defined(SAI_VER_V2_X) + /* SAI Peripheral version depends on STM32H7 device revision ID */ + if (HAL_GetREVID() >= REV_ID_B) /* STM32H7xx Rev.B and above */ + { + assert_param(IS_SAI_BLOCK_MCK_OUTPUT(hsai->Init.MckOutput)); + } +#else /* SAI_VER_V2_1 */ + assert_param(IS_SAI_BLOCK_MCK_OUTPUT(hsai->Init.MckOutput)); +#endif /* SAI_VER_V2_X */ + assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive)); + assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider)); + assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold)); + assert_param(IS_SAI_MONO_STEREO_MODE(hsai->Init.MonoStereoMode)); + assert_param(IS_SAI_BLOCK_COMPANDING_MODE(hsai->Init.CompandingMode)); + assert_param(IS_SAI_BLOCK_TRISTATE_MANAGEMENT(hsai->Init.TriState)); + assert_param(IS_SAI_BLOCK_SYNCEXT(hsai->Init.SynchroExt)); + assert_param(IS_SAI_BLOCK_MCK_OVERSAMPLING(hsai->Init.MckOverSampling)); + + /* Check the SAI Block Frame parameters */ + assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength)); + assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength)); + assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition)); + assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity)); + assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset)); + + /* Check the SAI Block Slot parameters */ + assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset)); + assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize)); + assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber)); + assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive)); + + /* Check the SAI PDM parameters */ + assert_param(IS_FUNCTIONAL_STATE(hsai->Init.PdmInit.Activation)); + if (hsai->Init.PdmInit.Activation == ENABLE) + { + assert_param(IS_SAI_PDM_MIC_PAIRS_NUMBER(hsai->Init.PdmInit.MicPairsNbr)); + assert_param(IS_SAI_PDM_CLOCK_ENABLE(hsai->Init.PdmInit.ClockEnable)); + /* Check that SAI sub-block is SAI1 or SAI4 sub-block A, in master RX mode with free protocol */ +#if defined(SAI4) + if (((hsai->Instance != SAI1_Block_A) && (hsai->Instance != SAI4_Block_A)) || + (hsai->Init.AudioMode != SAI_MODEMASTER_RX) || + (hsai->Init.Protocol != SAI_FREE_PROTOCOL)) + { + return HAL_ERROR; + } +#else + if ((hsai->Instance != SAI1_Block_A) || + (hsai->Init.AudioMode != SAI_MODEMASTER_RX) || + (hsai->Init.Protocol != SAI_FREE_PROTOCOL)) + { + return HAL_ERROR; + } +#endif /* SAI4 */ + } + + /* Get the SAI base address according to the SAI handle */ + if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B)) + { + SaiBaseAddress = SAI1; + } +#if defined(SAI2) + else if ((hsai->Instance == SAI2_Block_A) || (hsai->Instance == SAI2_Block_B)) + { + SaiBaseAddress = SAI2; + } +#endif /* SAI2 */ +#if defined(SAI3) + else if ((hsai->Instance == SAI3_Block_A) || (hsai->Instance == SAI3_Block_B)) + { + SaiBaseAddress = SAI3; + } +#endif /* SAI3 */ +#if defined(SAI4) + else if ((hsai->Instance == SAI4_Block_A) || (hsai->Instance == SAI4_Block_B)) + { + SaiBaseAddress = SAI4; + } +#endif /* SAI4 */ + else + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsai->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + /* Reset callback pointers to the weak predefined callbacks */ + hsai->RxCpltCallback = HAL_SAI_RxCpltCallback; + hsai->RxHalfCpltCallback = HAL_SAI_RxHalfCpltCallback; + hsai->TxCpltCallback = HAL_SAI_TxCpltCallback; + hsai->TxHalfCpltCallback = HAL_SAI_TxHalfCpltCallback; + hsai->ErrorCallback = HAL_SAI_ErrorCallback; + + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + if (hsai->MspInitCallback == NULL) + { + hsai->MspInitCallback = HAL_SAI_MspInit; + } + hsai->MspInitCallback(hsai); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_SAI_MspInit(hsai); +#endif + } + + /* Disable the selected SAI peripheral */ + if(SAI_Disable(hsai) != HAL_OK) + { + return HAL_ERROR; + } + + hsai->State = HAL_SAI_STATE_BUSY; + + /* SAI Block Synchro Configuration -----------------------------------------*/ + /* This setting must be done with both audio block (A & B) disabled */ + switch (hsai->Init.SynchroExt) + { + case SAI_SYNCEXT_DISABLE : + tmpregisterGCR = 0; + break; + case SAI_SYNCEXT_OUTBLOCKA_ENABLE : + tmpregisterGCR = SAI_GCR_SYNCOUT_0; + break; + case SAI_SYNCEXT_OUTBLOCKB_ENABLE : + tmpregisterGCR = SAI_GCR_SYNCOUT_1; + break; + default: + tmpregisterGCR = 0; + break; + } + + switch (hsai->Init.Synchro) + { + case SAI_ASYNCHRONOUS : + syncen_bits = 0; + break; + case SAI_SYNCHRONOUS : + syncen_bits = SAI_xCR1_SYNCEN_0; + break; + case SAI_SYNCHRONOUS_EXT_SAI1 : + syncen_bits = SAI_xCR1_SYNCEN_1; + break; +#if defined(SAI2) + case SAI_SYNCHRONOUS_EXT_SAI2 : + syncen_bits = SAI_xCR1_SYNCEN_1; + tmpregisterGCR |= SAI_GCR_SYNCIN_0; + break; +#endif /* SAI2 */ +#if defined(SAI3) + case SAI_SYNCHRONOUS_EXT_SAI3 : + syncen_bits = SAI_xCR1_SYNCEN_1; + tmpregisterGCR |= SAI_GCR_SYNCIN_1; + break; +#endif /* SAI3 */ +#if defined(SAI4) + case SAI_SYNCHRONOUS_EXT_SAI4 : + syncen_bits = SAI_xCR1_SYNCEN_1; + tmpregisterGCR |= (SAI_GCR_SYNCIN_1 | SAI_GCR_SYNCIN_0); + break; +#endif /* SAI4 */ + default: + syncen_bits = 0; + break; + } + + /* Set the SAI Block Synchro Configuration */ + SaiBaseAddress->GCR = tmpregisterGCR; + + if (hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV) + { + uint32_t freq = 0; + uint32_t tmpval; + + /* In this case, the MCKDIV value is calculated to get AudioFrequency */ + if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B)) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1); + } + +#if defined(SAI2) +#if defined(RCC_PERIPHCLK_SAI2) + if ((hsai->Instance == SAI2_Block_A) || (hsai->Instance == SAI2_Block_B)) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2); + } +#else + if (hsai->Instance == SAI2_Block_A) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2A); + } + if (hsai->Instance == SAI2_Block_B) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2B); + } +#endif /* RCC_PERIPHCLK_SAI2 */ +#endif /* SAI2 */ + +#if defined(SAI3) + if ((hsai->Instance == SAI3_Block_A) || (hsai->Instance == SAI3_Block_B)) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI3); + } +#endif /* SAI3 */ +#if defined(SAI4) + if (hsai->Instance == SAI4_Block_A) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI4A); + } + if (hsai->Instance == SAI4_Block_B) + { + freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI4B); + } +#endif /* SAI4 */ + + /* Configure Master Clock Divider using the following formula : + - If NODIV = 1 : + MCKDIV[5:0] = SAI_CK_x / (FS * (FRL + 1)) + - If NODIV = 0 : + MCKDIV[5:0] = SAI_CK_x / (FS * (OSR + 1) * 256) */ + if (hsai->Init.NoDivider == SAI_MASTERDIVIDER_DISABLE) + { + /* NODIV = 1 */ + uint32_t tmpframelength; + + if (hsai->Init.Protocol == SAI_SPDIF_PROTOCOL) + { + /* For SPDIF protocol, frame length is set by hardware to 64 */ + tmpframelength = SAI_SPDIF_FRAME_LENGTH; + } + else if (hsai->Init.Protocol == SAI_AC97_PROTOCOL) + { + /* For AC97 protocol, frame length is set by hardware to 256 */ + tmpframelength = SAI_AC97_FRAME_LENGTH; + } + else + { + /* For free protocol, frame length is set by user */ + tmpframelength = hsai->FrameInit.FrameLength; + } + + /* (freq x 10) to keep Significant digits */ + tmpval = (freq * 10U) / (hsai->Init.AudioFrequency * tmpframelength); + } + else + { + /* NODIV = 0 */ + uint32_t tmposr; + tmposr = (hsai->Init.MckOverSampling == SAI_MCK_OVERSAMPLING_ENABLE) ? 2U : 1U; + /* (freq x 10) to keep Significant digits */ + tmpval = (freq * 10U) / (hsai->Init.AudioFrequency * tmposr * 256U); + } + hsai->Init.Mckdiv = tmpval / 10U; + + /* Round result to the nearest integer */ + if ((tmpval % 10U) > 8U) + { + hsai->Init.Mckdiv += 1U; + } + + /* For SPDIF protocol, SAI shall provide a bit clock twice faster the symbol-rate */ + if (hsai->Init.Protocol == SAI_SPDIF_PROTOCOL) + { + hsai->Init.Mckdiv = hsai->Init.Mckdiv >> 1; + } + } + + /* Check the SAI Block master clock divider parameter */ + assert_param(IS_SAI_BLOCK_MASTER_DIVIDER(hsai->Init.Mckdiv)); + + /* Compute CKSTR bits of SAI CR1 according ClockStrobing and AudioMode */ + if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) + { + /* Transmit */ + ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? 0U : SAI_xCR1_CKSTR; + } + else + { + /* Receive */ + ckstr_bits = (hsai->Init.ClockStrobing == SAI_CLOCKSTROBING_RISINGEDGE) ? SAI_xCR1_CKSTR : 0U; + } + + /* SAI Block Configuration -------------------------------------------------*/ + /* SAI CR1 Configuration */ +#if defined(SAI_VER_V2_X) /* SAI Peripheral version depends on STM32H7 device revision ID */ + + if (HAL_GetREVID() >= REV_ID_B) /* STM32H7xx Rev.B and above */ + { + hsai->Instance->CR1 &= ~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG | SAI_xCR1_DS | \ + SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN | \ + SAI_xCR1_MONO | SAI_xCR1_OUTDRIV | SAI_xCR1_DMAEN | \ + SAI_xCR1_NODIV | SAI_xCR1_MCKDIV | SAI_xCR1_OSR | \ + SAI_xCR1_MCKEN); + + hsai->Instance->CR1 |= (hsai->Init.AudioMode | hsai->Init.Protocol | \ + hsai->Init.DataSize | hsai->Init.FirstBit | \ + ckstr_bits | syncen_bits | \ + hsai->Init.MonoStereoMode | hsai->Init.OutputDrive | \ + hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20) | \ + hsai->Init.MckOverSampling | hsai->Init.MckOutput); + } + else /* STM32H7xx Rev.Y */ + { + hsai->Instance->CR1 &= ~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG | SAI_xCR1_DS | \ + SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN | \ + SAI_xCR1_MONO | SAI_xCR1_OUTDRIV | SAI_xCR1_DMAEN | \ + SAI_xCR1_NODIV | SAI_xCR1_MCKDIV | SAI_xCR1_OSR); + + hsai->Instance->CR1 |= (hsai->Init.AudioMode | hsai->Init.Protocol | \ + hsai->Init.DataSize | hsai->Init.FirstBit | \ + ckstr_bits | syncen_bits | \ + hsai->Init.MonoStereoMode | hsai->Init.OutputDrive | \ + hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20) | \ + hsai->Init.MckOverSampling); + } +#else /* SAI_VER_V2_1*/ + hsai->Instance->CR1 &= ~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG | SAI_xCR1_DS | \ + SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN | \ + SAI_xCR1_MONO | SAI_xCR1_OUTDRIV | SAI_xCR1_DMAEN | \ + SAI_xCR1_NODIV | SAI_xCR1_MCKDIV | SAI_xCR1_OSR | \ + SAI_xCR1_MCKEN); + + hsai->Instance->CR1 |= (hsai->Init.AudioMode | hsai->Init.Protocol | \ + hsai->Init.DataSize | hsai->Init.FirstBit | \ + ckstr_bits | syncen_bits | \ + hsai->Init.MonoStereoMode | hsai->Init.OutputDrive | \ + hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20) | \ + hsai->Init.MckOverSampling | hsai->Init.MckOutput); +#endif /* SAI_VER_V2_X */ + + /* SAI CR2 Configuration */ + hsai->Instance->CR2 &= ~(SAI_xCR2_FTH | SAI_xCR2_FFLUSH | SAI_xCR2_COMP | SAI_xCR2_CPL); + hsai->Instance->CR2 |= (hsai->Init.FIFOThreshold | hsai->Init.CompandingMode | hsai->Init.TriState); + + /* SAI Frame Configuration -----------------------------------------*/ + hsai->Instance->FRCR &= (~(SAI_xFRCR_FRL | SAI_xFRCR_FSALL | SAI_xFRCR_FSDEF | \ + SAI_xFRCR_FSPOL | SAI_xFRCR_FSOFF)); + hsai->Instance->FRCR |= ((hsai->FrameInit.FrameLength - 1U) | + hsai->FrameInit.FSOffset | + hsai->FrameInit.FSDefinition | + hsai->FrameInit.FSPolarity | + ((hsai->FrameInit.ActiveFrameLength - 1U) << 8)); + + /* SAI Block_x SLOT Configuration ------------------------------------------*/ + /* This register has no meaning in AC 97 and SPDIF audio protocol */ + hsai->Instance->SLOTR &= (~(SAI_xSLOTR_FBOFF | SAI_xSLOTR_SLOTSZ | \ + SAI_xSLOTR_NBSLOT | SAI_xSLOTR_SLOTEN)); + + hsai->Instance->SLOTR |= hsai->SlotInit.FirstBitOffset | hsai->SlotInit.SlotSize | \ + (hsai->SlotInit.SlotActive << 16) | ((hsai->SlotInit.SlotNumber - 1U) << 8); + + /* SAI PDM Configuration ---------------------------------------------------*/ +#if defined(SAI4) + if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI4_Block_A)) +#else + if (hsai->Instance == SAI1_Block_A) +#endif /* SAI4 */ + { + /* Disable PDM interface */ + SaiBaseAddress->PDMCR &= ~(SAI_PDMCR_PDMEN); + if (hsai->Init.PdmInit.Activation == ENABLE) + { + /* Configure and enable PDM interface */ + SaiBaseAddress->PDMCR = (hsai->Init.PdmInit.ClockEnable | + ((hsai->Init.PdmInit.MicPairsNbr - 1U) << SAI_PDMCR_MICNBR_Pos)); + SaiBaseAddress->PDMCR |= SAI_PDMCR_PDMEN; + } + } + + /* Initialize the error code */ + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Initialize the SAI state */ + hsai->State = HAL_SAI_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief DeInitialize the SAI peripheral. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai) +{ + SAI_TypeDef *SaiBaseAddress; + + /* Check the SAI handle allocation */ + if (hsai == NULL) + { + return HAL_ERROR; + } + + hsai->State = HAL_SAI_STATE_BUSY; + + /* Disabled All interrupt and clear all the flag */ + hsai->Instance->IMR = 0; + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + /* Disable the SAI */ + if (SAI_Disable(hsai) != HAL_OK) + { + /* Reset SAI state to ready */ + hsai->State = HAL_SAI_STATE_READY; + + /* Release Lock */ + __HAL_UNLOCK(hsai); + + return HAL_ERROR; + } + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Disable SAI PDM interface */ +#if defined(SAI4) + if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI4_Block_A)) +#else + if (hsai->Instance == SAI1_Block_A) +#endif /* SAI4 */ + { + /* Get the SAI base address according to the SAI handle */ +#if defined(SAI4) + SaiBaseAddress = (hsai->Instance == SAI1_Block_A) ? SAI1 : SAI4; +#else + SaiBaseAddress = SAI1; +#endif /* SAI4 */ + + /* Reset PDM delays */ + SaiBaseAddress->PDMDLY = 0U; + + /* Disable PDM interface */ + SaiBaseAddress->PDMCR &= ~(SAI_PDMCR_PDMEN); + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + if (hsai->MspDeInitCallback == NULL) + { + hsai->MspDeInitCallback = HAL_SAI_MspDeInit; + } + hsai->MspDeInitCallback(hsai); +#else + HAL_SAI_MspDeInit(hsai); +#endif + + /* Initialize the error code */ + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Initialize the SAI state */ + hsai->State = HAL_SAI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief Initialize the SAI MSP. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SAI MSP. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) +/** + * @brief Register a user SAI callback + * to be used instead of the weak predefined callback. + * @param hsai SAI handle. + * @param CallbackID ID of the callback to be registered. + * This parameter can be one of the following values: + * @arg @ref HAL_SAI_RX_COMPLETE_CB_ID receive complete callback ID. + * @arg @ref HAL_SAI_RX_HALFCOMPLETE_CB_ID receive half complete callback ID. + * @arg @ref HAL_SAI_TX_COMPLETE_CB_ID transmit complete callback ID. + * @arg @ref HAL_SAI_TX_HALFCOMPLETE_CB_ID transmit half complete callback ID. + * @arg @ref HAL_SAI_ERROR_CB_ID error callback ID. + * @arg @ref HAL_SAI_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_SAI_MSPDEINIT_CB_ID MSP de-init callback ID. + * @param pCallback pointer to the callback function. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_SAI_RegisterCallback(SAI_HandleTypeDef *hsai, + HAL_SAI_CallbackIDTypeDef CallbackID, + pSAI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + else + { + if (HAL_SAI_STATE_READY == hsai->State) + { + switch (CallbackID) + { + case HAL_SAI_RX_COMPLETE_CB_ID : + hsai->RxCpltCallback = pCallback; + break; + case HAL_SAI_RX_HALFCOMPLETE_CB_ID : + hsai->RxHalfCpltCallback = pCallback; + break; + case HAL_SAI_TX_COMPLETE_CB_ID : + hsai->TxCpltCallback = pCallback; + break; + case HAL_SAI_TX_HALFCOMPLETE_CB_ID : + hsai->TxHalfCpltCallback = pCallback; + break; + case HAL_SAI_ERROR_CB_ID : + hsai->ErrorCallback = pCallback; + break; + case HAL_SAI_MSPINIT_CB_ID : + hsai->MspInitCallback = pCallback; + break; + case HAL_SAI_MSPDEINIT_CB_ID : + hsai->MspDeInitCallback = pCallback; + break; + default : + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SAI_STATE_RESET == hsai->State) + { + switch (CallbackID) + { + case HAL_SAI_MSPINIT_CB_ID : + hsai->MspInitCallback = pCallback; + break; + case HAL_SAI_MSPDEINIT_CB_ID : + hsai->MspDeInitCallback = pCallback; + break; + default : + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Unregister a user SAI callback. + * SAI callback is redirected to the weak predefined callback. + * @param hsai SAI handle. + * @param CallbackID ID of the callback to be unregistered. + * This parameter can be one of the following values: + * @arg @ref HAL_SAI_RX_COMPLETE_CB_ID receive complete callback ID. + * @arg @ref HAL_SAI_RX_HALFCOMPLETE_CB_ID receive half complete callback ID. + * @arg @ref HAL_SAI_TX_COMPLETE_CB_ID transmit complete callback ID. + * @arg @ref HAL_SAI_TX_HALFCOMPLETE_CB_ID transmit half complete callback ID. + * @arg @ref HAL_SAI_ERROR_CB_ID error callback ID. + * @arg @ref HAL_SAI_MSPINIT_CB_ID MSP init callback ID. + * @arg @ref HAL_SAI_MSPDEINIT_CB_ID MSP de-init callback ID. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_SAI_UnRegisterCallback(SAI_HandleTypeDef *hsai, + HAL_SAI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_SAI_STATE_READY == hsai->State) + { + switch (CallbackID) + { + case HAL_SAI_RX_COMPLETE_CB_ID : + hsai->RxCpltCallback = HAL_SAI_RxCpltCallback; + break; + case HAL_SAI_RX_HALFCOMPLETE_CB_ID : + hsai->RxHalfCpltCallback = HAL_SAI_RxHalfCpltCallback; + break; + case HAL_SAI_TX_COMPLETE_CB_ID : + hsai->TxCpltCallback = HAL_SAI_TxCpltCallback; + break; + case HAL_SAI_TX_HALFCOMPLETE_CB_ID : + hsai->TxHalfCpltCallback = HAL_SAI_TxHalfCpltCallback; + break; + case HAL_SAI_ERROR_CB_ID : + hsai->ErrorCallback = HAL_SAI_ErrorCallback; + break; + case HAL_SAI_MSPINIT_CB_ID : + hsai->MspInitCallback = HAL_SAI_MspInit; + break; + case HAL_SAI_MSPDEINIT_CB_ID : + hsai->MspDeInitCallback = HAL_SAI_MspDeInit; + break; + default : + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SAI_STATE_RESET == hsai->State) + { + switch (CallbackID) + { + case HAL_SAI_MSPINIT_CB_ID : + hsai->MspInitCallback = HAL_SAI_MspInit; + break; + case HAL_SAI_MSPDEINIT_CB_ID : + hsai->MspDeInitCallback = HAL_SAI_MspDeInit; + break; + default : + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update the error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + return status; +} +#endif /* USE_HAL_SAI_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SAI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SAI data + transfers. + + (+) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (+) Blocking mode functions are : + (++) HAL_SAI_Transmit() + (++) HAL_SAI_Receive() + + (+) Non Blocking mode functions with Interrupt are : + (++) HAL_SAI_Transmit_IT() + (++) HAL_SAI_Receive_IT() + + (+) Non Blocking mode functions with DMA are : + (++) HAL_SAI_Transmit_DMA() + (++) HAL_SAI_Receive_DMA() + + (+) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_SAI_TxCpltCallback() + (++) HAL_SAI_RxCpltCallback() + (++) HAL_SAI_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t temp; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->pBuffPtr = pData; + hsai->State = HAL_SAI_STATE_BUSY_TX; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* fill the fifo with data before to enabled the SAI */ + SAI_FillFifo(hsai); + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + while (hsai->XferCount > 0U) + { + /* Write data if the FIFO is not full */ + if ((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) + { + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + hsai->Instance->DR = *hsai->pBuffPtr; + hsai->pBuffPtr++; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + } + else + { + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 16); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 24); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + } + hsai->XferCount--; + } + else + { + /* Check for the Timeout */ + if ((((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) && (Timeout != HAL_MAX_DELAY)) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Clear all the flags */ + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + /* Disable SAI peripheral */ + /* No need to check return value because state update, unlock and error return will be performed later */ + (void) SAI_Disable(hsai); + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Change the SAI state */ + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_ERROR; + } + } + } + + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t temp; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->State = HAL_SAI_STATE_BUSY_RX; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Receive data */ + while (hsai->XferCount > 0U) + { + if ((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_EMPTY) + { + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + *hsai->pBuffPtr = (uint8_t)hsai->Instance->DR; + hsai->pBuffPtr++; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + temp = hsai->Instance->DR; + *hsai->pBuffPtr = (uint8_t)temp; + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 8); + hsai->pBuffPtr++; + } + else + { + temp = hsai->Instance->DR; + *hsai->pBuffPtr = (uint8_t)temp; + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 8); + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 16); + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 24); + hsai->pBuffPtr++; + } + hsai->XferCount--; + } + else + { + /* Check for the Timeout */ + if ((((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) && (Timeout != HAL_MAX_DELAY)) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Clear all the flags */ + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + /* Disable SAI peripheral */ + /* No need to check return value because state update, unlock and error return will be performed later */ + (void) SAI_Disable(hsai); + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Change the SAI state */ + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_ERROR; + } + } + } + + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) +{ + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + hsai->State = HAL_SAI_STATE_BUSY_TX; + + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + hsai->InterruptServiceRoutine = SAI_Transmit_IT8Bit; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + hsai->InterruptServiceRoutine = SAI_Transmit_IT16Bit; + } + else + { + hsai->InterruptServiceRoutine = SAI_Transmit_IT32Bit; + } + + /* Fill the fifo before starting the communication */ + SAI_FillFifo(hsai); + + /* Enable FRQ and OVRUDR interrupts */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) +{ + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + hsai->State = HAL_SAI_STATE_BUSY_RX; + + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + hsai->InterruptServiceRoutine = SAI_Receive_IT8Bit; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + hsai->InterruptServiceRoutine = SAI_Receive_IT16Bit; + } + else + { + hsai->InterruptServiceRoutine = SAI_Receive_IT32Bit; + } + + /* Enable TXE and OVRUDR interrupts */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the audio stream playing from the Media. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai) +{ + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Pause the audio file playing by disabling the SAI DMA requests */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief Resume the audio stream playing from the Media. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai) +{ + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Enable the SAI DMA requests */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + /* If the SAI peripheral is still not enabled, enable it */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; +} + +/** + * @brief Stop the audio stream playing from the Media. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Disable SAI peripheral */ + if (SAI_Disable(hsai) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Disable the SAI DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Abort the SAI Tx DMA Stream */ + if ((hsai->State == HAL_SAI_STATE_BUSY_TX) && (hsai->hdmatx != NULL)) + { + if (HAL_DMA_Abort(hsai->hdmatx) != HAL_OK) + { + /* If the DMA Tx errorCode is different from DMA No Transfer then return Error */ + if (hsai->hdmatx->ErrorCode != HAL_DMA_ERROR_NO_XFER) + { + status = HAL_ERROR; + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + } + } + } + + /* Abort the SAI Rx DMA Stream */ + if ((hsai->State == HAL_SAI_STATE_BUSY_RX) && (hsai->hdmarx != NULL)) + { + if (HAL_DMA_Abort(hsai->hdmarx) != HAL_OK) + { + /* If the DMA Rx errorCode is different from DMA No Transfer then return Error */ + if (hsai->hdmarx->ErrorCode != HAL_DMA_ERROR_NO_XFER) + { + status = HAL_ERROR; + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + } + } + } + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Set hsai state to ready */ + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return status; +} + +/** + * @brief Abort the current transfer and disable the SAI. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hsai); + + /* Disable SAI peripheral */ + if (SAI_Disable(hsai) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Check SAI DMA is enabled or not */ + if ((hsai->Instance->CR1 & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) + { + /* Disable the SAI DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Abort the SAI Tx DMA Stream */ + if ((hsai->State == HAL_SAI_STATE_BUSY_TX)&& (hsai->hdmatx != NULL)) + { + if (HAL_DMA_Abort(hsai->hdmatx) != HAL_OK) + { + /* If the DMA Tx errorCode is different from DMA No Transfer then return Error */ + if (hsai->hdmatx->ErrorCode != HAL_DMA_ERROR_NO_XFER) + { + status = HAL_ERROR; + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + } + } + } + + /* Abort the SAI Rx DMA Stream */ + if ((hsai->State == HAL_SAI_STATE_BUSY_RX) && (hsai->hdmarx != NULL)) + { + if (HAL_DMA_Abort(hsai->hdmarx) != HAL_OK) + { + /* If the DMA Rx errorCode is different from DMA No Transfer then return Error */ + if (hsai->hdmarx->ErrorCode != HAL_DMA_ERROR_NO_XFER) + { + status = HAL_ERROR; + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + } + } + } + } + + /* Disabled All interrupt and clear all the flag */ + hsai->Instance->IMR = 0; + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + + /* Set hsai state to ready */ + hsai->State = HAL_SAI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return status; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) +{ + uint32_t tickstart = HAL_GetTick(); + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + hsai->State = HAL_SAI_STATE_BUSY_TX; + + /* Set the SAI Tx DMA Half transfer complete callback */ + hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt; + + /* Set the SAI TxDMA transfer complete callback */ + hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt; + + /* Set the DMA error callback */ + hsai->hdmatx->XferErrorCallback = SAI_DMAError; + + /* Set the DMA Tx abort callback */ + hsai->hdmatx->XferAbortCallback = NULL; + + /* Enable the Tx DMA Stream */ + if (HAL_DMA_Start_IT(hsai->hdmatx, (uint32_t)hsai->pBuffPtr, (uint32_t)&hsai->Instance->DR, hsai->XferSize) != HAL_OK) + { + __HAL_UNLOCK(hsai); + return HAL_ERROR; + } + + /* Enable the interrupts for error handling */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + /* Enable SAI Tx DMA Request */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + /* Wait until FIFO is not empty */ + while ((hsai->Instance->SR & SAI_xSR_FLVL) == SAI_FIFOSTATUS_EMPTY) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > SAI_LONG_TIMEOUT) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_TIMEOUT; + } + } + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param pData Pointer to data buffer + * @param Size Amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size) +{ + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hsai->State == HAL_SAI_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsai); + + hsai->pBuffPtr = pData; + hsai->XferSize = Size; + hsai->XferCount = Size; + hsai->ErrorCode = HAL_SAI_ERROR_NONE; + hsai->State = HAL_SAI_STATE_BUSY_RX; + + /* Set the SAI Rx DMA Half transfer complete callback */ + hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt; + + /* Set the SAI Rx DMA transfer complete callback */ + hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt; + + /* Set the DMA error callback */ + hsai->hdmarx->XferErrorCallback = SAI_DMAError; + + /* Set the DMA Rx abort callback */ + hsai->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream */ + if (HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, (uint32_t)hsai->pBuffPtr, hsai->XferSize) != HAL_OK) + { + __HAL_UNLOCK(hsai); + return HAL_ERROR; + } + + /* Enable the interrupts for error handling */ + __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + /* Enable SAI Rx DMA Request */ + hsai->Instance->CR1 |= SAI_xCR1_DMAEN; + + /* Check if the SAI is already enabled */ + if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == 0U) + { + /* Enable SAI peripheral */ + __HAL_SAI_ENABLE(hsai); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsai); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the Tx mute mode. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param val value sent during the mute @ref SAI_Block_Mute_Value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val) +{ + assert_param(IS_SAI_BLOCK_MUTE_VALUE(val)); + + if (hsai->State != HAL_SAI_STATE_RESET) + { + CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE); + SET_BIT(hsai->Instance->CR2, SAI_xCR2_MUTE | (uint32_t)val); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Disable the Tx mute mode. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai) +{ + if (hsai->State != HAL_SAI_STATE_RESET) + { + CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Enable the Rx mute detection. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param callback function called when the mute is detected. + * @param counter number a data before mute detection max 63. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter) +{ + assert_param(IS_SAI_BLOCK_MUTE_COUNTER(counter)); + + if (hsai->State != HAL_SAI_STATE_RESET) + { + /* set the mute counter */ + CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTECNT); + SET_BIT(hsai->Instance->CR2, (uint32_t)((uint32_t)counter << SAI_xCR2_MUTECNT_Pos)); + hsai->mutecallback = callback; + /* enable the IT interrupt */ + __HAL_SAI_ENABLE_IT(hsai, SAI_IT_MUTEDET); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Disable the Rx mute detection. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai) +{ + if (hsai->State != HAL_SAI_STATE_RESET) + { + /* set the mutecallback to NULL */ + hsai->mutecallback = NULL; + /* enable the IT interrupt */ + __HAL_SAI_DISABLE_IT(hsai, SAI_IT_MUTEDET); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Handle SAI interrupt request. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai) +{ + if (hsai->State != HAL_SAI_STATE_RESET) + { + uint32_t itflags = hsai->Instance->SR; + uint32_t itsources = hsai->Instance->IMR; + uint32_t cr1config = hsai->Instance->CR1; + uint32_t tmperror; + + /* SAI Fifo request interrupt occurred ------------------------------------*/ + if (((itflags & SAI_xSR_FREQ) == SAI_xSR_FREQ) && ((itsources & SAI_IT_FREQ) == SAI_IT_FREQ)) + { + hsai->InterruptServiceRoutine(hsai); + } + /* SAI Overrun error interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_OVRUDR) == SAI_FLAG_OVRUDR) && ((itsources & SAI_IT_OVRUDR) == SAI_IT_OVRUDR)) + { + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + /* Get the SAI error code */ + tmperror = ((hsai->State == HAL_SAI_STATE_BUSY_RX) ? HAL_SAI_ERROR_OVR : HAL_SAI_ERROR_UDR); + /* Change the SAI error code */ + hsai->ErrorCode |= tmperror; + /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + /* SAI mutedet interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_MUTEDET) == SAI_FLAG_MUTEDET) && ((itsources & SAI_IT_MUTEDET) == SAI_IT_MUTEDET)) + { + /* Clear the SAI mutedet flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_MUTEDET); + /* call the call back function */ + if (hsai->mutecallback != NULL) + { + /* inform the user that an RX mute event has been detected */ + hsai->mutecallback(); + } + } + /* SAI AFSDET interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((itsources & SAI_IT_AFSDET) == SAI_IT_AFSDET)) + { + /* Clear the SAI AFSDET flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_AFSDET); + + /* Change the SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_AFSDET; + + /* Check SAI DMA is enabled or not */ + if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) + { + /* Abort the SAI DMA Streams */ + if (hsai->hdmatx != NULL) + { + /* Set the DMA Tx abort callback */ + hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmatx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + if (hsai->hdmarx != NULL) + { + /* Set the DMA Rx abort callback */ + hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmarx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + } + else + { + /* Abort SAI */ + /* No need to check return value because HAL_SAI_ErrorCallback will be called later */ + (void) HAL_SAI_Abort(hsai); + + /* Set error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + /* SAI LFSDET interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((itsources & SAI_IT_LFSDET) == SAI_IT_LFSDET)) + { + /* Clear the SAI LFSDET flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_LFSDET); + + /* Change the SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_LFSDET; + + /* Check SAI DMA is enabled or not */ + if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) + { + /* Abort the SAI DMA Streams */ + if (hsai->hdmatx != NULL) + { + /* Set the DMA Tx abort callback */ + hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmatx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + if (hsai->hdmarx != NULL) + { + /* Set the DMA Rx abort callback */ + hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmarx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + } + else + { + /* Abort SAI */ + /* No need to check return value because HAL_SAI_ErrorCallback will be called later */ + (void) HAL_SAI_Abort(hsai); + + /* Set error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + /* SAI WCKCFG interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((itsources & SAI_IT_WCKCFG) == SAI_IT_WCKCFG)) + { + /* Clear the SAI WCKCFG flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_WCKCFG); + + /* Change the SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_WCKCFG; + + /* Check SAI DMA is enabled or not */ + if ((cr1config & SAI_xCR1_DMAEN) == SAI_xCR1_DMAEN) + { + /* Abort the SAI DMA Streams */ + if (hsai->hdmatx != NULL) + { + /* Set the DMA Tx abort callback */ + hsai->hdmatx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmatx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + if (hsai->hdmarx != NULL) + { + /* Set the DMA Rx abort callback */ + hsai->hdmarx->XferAbortCallback = SAI_DMAAbort; + + /* Abort DMA in IT mode */ + if (HAL_DMA_Abort_IT(hsai->hdmarx) != HAL_OK) + { + /* Update SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Call SAI error callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + } + else + { + /* If WCKCFG occurs, SAI audio block is automatically disabled */ + /* Disable all interrupts and clear all flags */ + hsai->Instance->IMR = 0U; + hsai->Instance->CLRFR = 0xFFFFFFFFU; + /* Set the SAI state to ready to be able to start again the process */ + hsai->State = HAL_SAI_STATE_READY; + + /* Initialize XferCount */ + hsai->XferCount = 0U; + + /* SAI error Callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + } + /* SAI CNRDY interrupt occurred ----------------------------------*/ + else if (((itflags & SAI_FLAG_CNRDY) == SAI_FLAG_CNRDY) && ((itsources & SAI_IT_CNRDY) == SAI_IT_CNRDY)) + { + /* Clear the SAI CNRDY flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_CNRDY); + /* Change the SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_CNREADY; + /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer Half completed callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief SAI error callback. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsai); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SAI_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SAI_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SAI handle state. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval HAL state + */ +HAL_SAI_StateTypeDef HAL_SAI_GetState(const SAI_HandleTypeDef *hsai) +{ + return hsai->State; +} + +/** + * @brief Return the SAI error code. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for the specified SAI Block. + * @retval SAI Error Code + */ +uint32_t HAL_SAI_GetError(const SAI_HandleTypeDef *hsai) +{ + return hsai->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SAI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief Initialize the SAI I2S protocol according to the specified parameters + * in the SAI_InitTypeDef and create the associated handle. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param protocol one of the supported protocol. + * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize. + * @param nbslot number of slot minimum value is 2 and max is 16. + * the value must be a multiple of 2. + * @retval HAL status + */ +static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) +{ + HAL_StatusTypeDef status = HAL_OK; + + hsai->Init.Protocol = SAI_FREE_PROTOCOL; + hsai->Init.FirstBit = SAI_FIRSTBIT_MSB; + /* Compute ClockStrobing according AudioMode */ + if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) + { + /* Transmit */ + hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE; + } + else + { + /* Receive */ + hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE; + } + hsai->FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION; + hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL; + hsai->SlotInit.FirstBitOffset = 0; + hsai->SlotInit.SlotNumber = nbslot; + + /* in IS2 the number of slot must be even */ + if ((nbslot & 0x1U) != 0U) + { + return HAL_ERROR; + } + + if (protocol == SAI_I2S_STANDARD) + { + hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW; + hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT; + } + else + { + /* SAI_I2S_MSBJUSTIFIED or SAI_I2S_LSBJUSTIFIED */ + hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH; + hsai->FrameInit.FSOffset = SAI_FS_FIRSTBIT; + } + + /* Frame definition */ + switch (datasize) + { + case SAI_PROTOCOL_DATASIZE_16BIT: + hsai->Init.DataSize = SAI_DATASIZE_16; + hsai->FrameInit.FrameLength = 32U * (nbslot / 2U); + hsai->FrameInit.ActiveFrameLength = 16U * (nbslot / 2U); + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B; + break; + case SAI_PROTOCOL_DATASIZE_16BITEXTENDED : + hsai->Init.DataSize = SAI_DATASIZE_16; + hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); + hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + case SAI_PROTOCOL_DATASIZE_24BIT: + hsai->Init.DataSize = SAI_DATASIZE_24; + hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); + hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + case SAI_PROTOCOL_DATASIZE_32BIT: + hsai->Init.DataSize = SAI_DATASIZE_32; + hsai->FrameInit.FrameLength = 64U * (nbslot / 2U); + hsai->FrameInit.ActiveFrameLength = 32U * (nbslot / 2U); + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + default : + status = HAL_ERROR; + break; + } + if (protocol == SAI_I2S_LSBJUSTIFIED) + { + if (datasize == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) + { + hsai->SlotInit.FirstBitOffset = 16; + } + if (datasize == SAI_PROTOCOL_DATASIZE_24BIT) + { + hsai->SlotInit.FirstBitOffset = 8; + } + } + return status; +} + +/** + * @brief Initialize the SAI PCM protocol according to the specified parameters + * in the SAI_InitTypeDef and create the associated handle. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param protocol one of the supported protocol + * @param datasize one of the supported datasize @ref SAI_Protocol_DataSize + * @param nbslot number of slot minimum value is 1 and the max is 16. + * @retval HAL status + */ +static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot) +{ + HAL_StatusTypeDef status = HAL_OK; + + hsai->Init.Protocol = SAI_FREE_PROTOCOL; + hsai->Init.FirstBit = SAI_FIRSTBIT_MSB; + /* Compute ClockStrobing according AudioMode */ + if ((hsai->Init.AudioMode == SAI_MODEMASTER_TX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) + { + /* Transmit */ + hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_RISINGEDGE; + } + else + { + /* Receive */ + hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE; + } + hsai->FrameInit.FSDefinition = SAI_FS_STARTFRAME; + hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH; + hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT; + hsai->SlotInit.FirstBitOffset = 0; + hsai->SlotInit.SlotNumber = nbslot; + hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL; + + if (protocol == SAI_PCM_SHORT) + { + hsai->FrameInit.ActiveFrameLength = 1; + } + else + { + /* SAI_PCM_LONG */ + hsai->FrameInit.ActiveFrameLength = 13; + } + + switch (datasize) + { + case SAI_PROTOCOL_DATASIZE_16BIT: + hsai->Init.DataSize = SAI_DATASIZE_16; + hsai->FrameInit.FrameLength = 16U * nbslot; + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B; + break; + case SAI_PROTOCOL_DATASIZE_16BITEXTENDED : + hsai->Init.DataSize = SAI_DATASIZE_16; + hsai->FrameInit.FrameLength = 32U * nbslot; + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + case SAI_PROTOCOL_DATASIZE_24BIT : + hsai->Init.DataSize = SAI_DATASIZE_24; + hsai->FrameInit.FrameLength = 32U * nbslot; + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + case SAI_PROTOCOL_DATASIZE_32BIT: + hsai->Init.DataSize = SAI_DATASIZE_32; + hsai->FrameInit.FrameLength = 32U * nbslot; + hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B; + break; + default : + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Fill the fifo. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_FillFifo(SAI_HandleTypeDef *hsai) +{ + uint32_t temp; + + /* fill the fifo with data before to enabled the SAI */ + while (((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) && (hsai->XferCount > 0U)) + { + if ((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING)) + { + hsai->Instance->DR = *hsai->pBuffPtr; + hsai->pBuffPtr++; + } + else if (hsai->Init.DataSize <= SAI_DATASIZE_16) + { + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + } + else + { + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 16); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 24); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + } + hsai->XferCount--; + } +} + +/** + * @brief Return the interrupt flag to set according the SAI setup. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @param mode SAI_MODE_DMA or SAI_MODE_IT + * @retval the list of the IT flag to enable + */ +static uint32_t SAI_InterruptFlag(const SAI_HandleTypeDef *hsai, SAI_ModeTypedef mode) +{ + uint32_t tmpIT = SAI_IT_OVRUDR; + + if (mode == SAI_MODE_IT) + { + tmpIT |= SAI_IT_FREQ; + } + + if ((hsai->Init.Protocol == SAI_AC97_PROTOCOL) && + ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODEMASTER_RX))) + { + tmpIT |= SAI_IT_CNRDY; + } + + if ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX)) + { + tmpIT |= SAI_IT_AFSDET | SAI_IT_LFSDET; + } + else + { + /* hsai has been configured in master mode */ + tmpIT |= SAI_IT_WCKCFG; + } + return tmpIT; +} + +/** + * @brief Disable the SAI and wait for the disabling. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai) +{ + uint32_t count = SAI_DEFAULT_TIMEOUT * (SystemCoreClock / 7U / 1000U); + HAL_StatusTypeDef status = HAL_OK; + + /* Disable the SAI instance */ + __HAL_SAI_DISABLE(hsai); + + do + { + /* Check for the Timeout */ + if (count == 0U) + { + /* Update error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT; + status = HAL_TIMEOUT; + break; + } + count--; + } + while ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != 0U); + + return status; +} + +/** + * @brief Tx Handler for Transmit in Interrupt mode 8-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai) +{ + if (hsai->XferCount == 0U) + { + /* Handle the end of the transmission */ + /* Disable FREQ and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxCpltCallback(hsai); +#else + HAL_SAI_TxCpltCallback(hsai); +#endif + } + else + { + /* Write data on DR register */ + hsai->Instance->DR = *hsai->pBuffPtr; + hsai->pBuffPtr++; + hsai->XferCount--; + } +} + +/** + * @brief Tx Handler for Transmit in Interrupt mode for 16-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai) +{ + if (hsai->XferCount == 0U) + { + /* Handle the end of the transmission */ + /* Disable FREQ and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxCpltCallback(hsai); +#else + HAL_SAI_TxCpltCallback(hsai); +#endif + } + else + { + /* Write data on DR register */ + uint32_t temp; + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + hsai->XferCount--; + } +} + +/** + * @brief Tx Handler for Transmit in Interrupt mode for 32-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai) +{ + if (hsai->XferCount == 0U) + { + /* Handle the end of the transmission */ + /* Disable FREQ and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxCpltCallback(hsai); +#else + HAL_SAI_TxCpltCallback(hsai); +#endif + } + else + { + /* Write data on DR register */ + uint32_t temp; + temp = (uint32_t)(*hsai->pBuffPtr); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 8); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 16); + hsai->pBuffPtr++; + temp |= ((uint32_t)(*hsai->pBuffPtr) << 24); + hsai->pBuffPtr++; + hsai->Instance->DR = temp; + hsai->XferCount--; + } +} + +/** + * @brief Rx Handler for Receive in Interrupt mode 8-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai) +{ + /* Receive data */ + *hsai->pBuffPtr = (uint8_t)hsai->Instance->DR; + hsai->pBuffPtr++; + hsai->XferCount--; + + /* Check end of the transfer */ + if (hsai->XferCount == 0U) + { + /* Disable TXE and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxCpltCallback(hsai); +#else + HAL_SAI_RxCpltCallback(hsai); +#endif + } +} + +/** + * @brief Rx Handler for Receive in Interrupt mode for 16-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai) +{ + uint32_t temp; + + /* Receive data */ + temp = hsai->Instance->DR; + *hsai->pBuffPtr = (uint8_t)temp; + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 8); + hsai->pBuffPtr++; + hsai->XferCount--; + + /* Check end of the transfer */ + if (hsai->XferCount == 0U) + { + /* Disable TXE and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxCpltCallback(hsai); +#else + HAL_SAI_RxCpltCallback(hsai); +#endif + } +} + +/** + * @brief Rx Handler for Receive in Interrupt mode for 32-Bit transfer. + * @param hsai pointer to a SAI_HandleTypeDef structure that contains + * the configuration information for SAI module. + * @retval None + */ +static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai) +{ + uint32_t temp; + + /* Receive data */ + temp = hsai->Instance->DR; + *hsai->pBuffPtr = (uint8_t)temp; + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 8); + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 16); + hsai->pBuffPtr++; + *hsai->pBuffPtr = (uint8_t)(temp >> 24); + hsai->pBuffPtr++; + hsai->XferCount--; + + /* Check end of the transfer */ + if (hsai->XferCount == 0U) + { + /* Disable TXE and OVRUDR interrupts */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); + + /* Clear the SAI Overrun flag */ + __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR); + + hsai->State = HAL_SAI_STATE_READY; +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxCpltCallback(hsai); +#else + HAL_SAI_RxCpltCallback(hsai); +#endif + } +} + +/** + * @brief DMA SAI transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma->Init.Mode != DMA_CIRCULAR) + { + hsai->XferCount = 0; + + /* Disable SAI Tx DMA Request */ + hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN); + + /* Stop the interrupts error handling */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + hsai->State = HAL_SAI_STATE_READY; + } +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxCpltCallback(hsai); +#else + HAL_SAI_TxCpltCallback(hsai); +#endif +} + +/** + * @brief DMA SAI transmit process half complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->TxHalfCpltCallback(hsai); +#else + HAL_SAI_TxHalfCpltCallback(hsai); +#endif +} + +/** + * @brief DMA SAI receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma->Init.Mode != DMA_CIRCULAR) + { + /* Disable Rx DMA Request */ + hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN); + hsai->XferCount = 0; + + /* Stop the interrupts error handling */ + __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA)); + + hsai->State = HAL_SAI_STATE_READY; + } +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxCpltCallback(hsai); +#else + HAL_SAI_RxCpltCallback(hsai); +#endif +} + +/** + * @brief DMA SAI receive process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->RxHalfCpltCallback(hsai); +#else + HAL_SAI_RxHalfCpltCallback(hsai); +#endif +} + +/** + * @brief DMA SAI communication error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMAError(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Ignore DMA FIFO error */ + if (HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE) + { + /* Set SAI error code */ + hsai->ErrorCode |= HAL_SAI_ERROR_DMA; + + /* Disable the SAI DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Disable SAI peripheral */ + /* No need to check return value because state will be updated and HAL_SAI_ErrorCallback will be called later */ + (void) SAI_Disable(hsai); + + /* Set the SAI state ready to be able to start again the process */ + hsai->State = HAL_SAI_STATE_READY; + + /* Initialize XferCount */ + hsai->XferCount = 0U; + + /* SAI error Callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif + } +} + +/** + * @brief DMA SAI Abort callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SAI_DMAAbort(DMA_HandleTypeDef *hdma) +{ + SAI_HandleTypeDef *hsai = (SAI_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Disable DMA request */ + hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN; + + /* Disable all interrupts and clear all flags */ + hsai->Instance->IMR = 0U; + hsai->Instance->CLRFR = 0xFFFFFFFFU; + + if (hsai->ErrorCode != HAL_SAI_ERROR_WCKCFG) + { + /* Disable SAI peripheral */ + /* No need to check return value because state will be updated and HAL_SAI_ErrorCallback will be called later */ + (void) SAI_Disable(hsai); + + /* Flush the fifo */ + SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH); + } + /* Set the SAI state to ready to be able to start again the process */ + hsai->State = HAL_SAI_STATE_READY; + + /* Initialize XferCount */ + hsai->XferCount = 0U; + + /* SAI error Callback */ +#if (USE_HAL_SAI_REGISTER_CALLBACKS == 1) + hsai->ErrorCallback(hsai); +#else + HAL_SAI_ErrorCallback(hsai); +#endif +} + +/** + * @} + */ + +#endif /* HAL_SAI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai_ex.c new file mode 100644 index 0000000..702e130 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sai_ex.c @@ -0,0 +1,134 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sai_ex.c + * @author MCD Application Team + * @brief SAI Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionality of the SAI Peripheral Controller: + * + Modify PDM microphone delays. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ +#ifdef HAL_SAI_MODULE_ENABLED + +/** @defgroup SAIEx SAIEx + * @brief SAI Extended HAL module driver + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +#define SAI_PDM_DELAY_MASK 0x77U +#define SAI_PDM_DELAY_OFFSET 8U +#define SAI_PDM_RIGHT_DELAY_OFFSET 4U + +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SAIEx_Exported_Functions SAIEx Extended Exported Functions + * @{ + */ + +/** @defgroup SAIEx_Exported_Functions_Group1 Peripheral Control functions + * @brief SAIEx control functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Modify PDM microphone delays + +@endverbatim + * @{ + */ + +/** + * @brief Configure PDM microphone delays. + * @param hsai SAI handle. + * @param pdmMicDelay Microphone delays configuration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SAIEx_ConfigPdmMicDelay(const SAI_HandleTypeDef *hsai, + const SAIEx_PdmMicDelayParamTypeDef *pdmMicDelay) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t offset; + SAI_TypeDef *SaiBaseAddress; + + /* Get the SAI base address according to the SAI handle */ +#if defined(SAI4) + SaiBaseAddress = ((hsai->Instance == SAI1_Block_A) ? SAI1 : \ + (hsai->Instance == SAI4_Block_A) ? SAI4 : \ + NULL); +#else + SaiBaseAddress = ((hsai->Instance == SAI1_Block_A) ? SAI1 : NULL); +#endif /* SAI4 */ + + /* Check that SAI sub-block is SAI sub-block A */ + if (SaiBaseAddress == NULL) + { + status = HAL_ERROR; + } + else + { + /* Check microphone delay parameters */ + assert_param(IS_SAI_PDM_MIC_PAIRS_NUMBER(pdmMicDelay->MicPair)); + assert_param(IS_SAI_PDM_MIC_DELAY(pdmMicDelay->LeftDelay)); + assert_param(IS_SAI_PDM_MIC_DELAY(pdmMicDelay->RightDelay)); + + /* Compute offset on PDMDLY register according mic pair number */ + offset = SAI_PDM_DELAY_OFFSET * (pdmMicDelay->MicPair - 1U); + + /* Check SAI state and offset */ + if ((hsai->State != HAL_SAI_STATE_RESET) && (offset <= 24U)) + { + /* Reset current delays for specified microphone */ + SaiBaseAddress->PDMDLY &= ~(SAI_PDM_DELAY_MASK << offset); + + /* Apply new microphone delays */ + SaiBaseAddress->PDMDLY |= (((pdmMicDelay->RightDelay << SAI_PDM_RIGHT_DELAY_OFFSET) | pdmMicDelay->LeftDelay) << offset); + } + else + { + status = HAL_ERROR; + } + } + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SAI_MODULE_ENABLED */ +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd.c new file mode 100644 index 0000000..704d1ba --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd.c @@ -0,0 +1,4158 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sd.c + * @author MCD Application Team + * @brief SD card HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (SD) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver implements a high level communication layer for read and write from/to + this memory. The needed STM32 hardware resources (SDMMC and GPIO) are performed by + the user in HAL_SD_MspInit() function (MSP layer). + Basically, the MSP layer configuration should be the same as we provide in the + examples. + You can easily tailor this configuration according to hardware resources. + + [..] + This driver is a generic layered driver for SDMMC memories which uses the HAL + SDMMC driver functions to interface with SD and uSD cards devices. + It is used as follows: + + (#)Initialize the SDMMC low level resources by implementing the HAL_SD_MspInit() API: + (##) Enable the SDMMC interface clock using __HAL_RCC_SDMMC_CLK_ENABLE(); + (##) SDMMC pins configuration for SD card + (+++) Enable the clock for the SDMMC GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these SDMMC pins as alternate function pull-up using HAL_GPIO_Init() + and according to your pin assignment; + (##) NVIC configuration if you need to use interrupt process (HAL_SD_ReadBlocks_IT() + and HAL_SD_WriteBlocks_IT() APIs). + (+++) Configure the SDMMC interrupt priorities using function HAL_NVIC_SetPriority(); + (+++) Enable the NVIC SDMMC IRQs using function HAL_NVIC_EnableIRQ() + (+++) SDMMC interrupts are managed using the macros __HAL_SD_ENABLE_IT() + and __HAL_SD_DISABLE_IT() inside the communication process. + (+++) SDMMC interrupts pending bits are managed using the macros __HAL_SD_GET_IT() + and __HAL_SD_CLEAR_IT() + (##) No general propose DMA Configuration is needed, an Internal DMA for SDMMC Peripheral are used. + + (#) At this stage, you can perform SD read/write/erase operations after SD card initialization + + + *** SD Card Initialization and configuration *** + ================================================ + [..] + To initialize the SD Card, use the HAL_SD_Init() function. It Initializes + SDMMC Peripheral(STM32 side) and the SD Card, and put it into StandBy State (Ready for data transfer). + This function provide the following operations: + + (#) Apply the SD Card initialization process at 400KHz and check the SD Card + type (Standard Capacity or High Capacity). You can change or adapt this + frequency by adjusting the "ClockDiv" field. + The SD Card frequency (SDMMC_CK) is computed as follows: + + SDMMC_CK = SDMMCCLK / (2 * ClockDiv) + + In initialization mode and according to the SD Card standard, + make sure that the SDMMC_CK frequency doesn't exceed 400KHz. + + This phase of initialization is done through SDMMC_Init() and + SDMMC_PowerState_ON() SDMMC low level APIs. + + (#) Initialize the SD card. The API used is HAL_SD_InitCard(). + This phase allows the card initialization and identification + and check the SD Card type (Standard Capacity or High Capacity) + The initialization flow is compatible with SD standard. + + This API (HAL_SD_InitCard()) could be used also to reinitialize the card in case + of plug-off plug-in. + + (#) Configure the SD Card Data transfer frequency. You can change or adapt this + frequency by adjusting the "ClockDiv" field. + In transfer mode and according to the SD Card standard, make sure that the + SDMMC_CK frequency doesn't exceed 25MHz and 100MHz in High-speed mode switch. + + (#) Select the corresponding SD Card according to the address read with the step 2. + + (#) Configure the SD Card in wide bus mode: 4-bits data. + + *** SD Card Read operation *** + ============================== + [..] + (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + + (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the DMA transfer process through the SD Rx interrupt event. + + (+) You can read from SD card in Interrupt mode by using function HAL_SD_ReadBlocks_IT(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the IT transfer process through the SD Rx interrupt event. + + *** SD Card Write operation *** + =============================== + [..] + (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + + (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the DMA transfer process through the SD Tx interrupt event. + + (+) You can write to SD card in Interrupt mode by using function HAL_SD_WriteBlocks_IT(). + This function support only 512-bytes block length (the block size should be + chosen as 512 bytes). + You can choose either one block read operation or multiple block read operation + by adjusting the "NumberOfBlocks" parameter. + After this, you have to ensure that the transfer is done correctly. The check is done + through HAL_SD_GetCardState() function for SD card state. + You could also check the IT transfer process through the SD Tx interrupt event. + + *** SD card status *** + ====================== + [..] + (+) The SD Status contains status bits that are related to the SD Memory + Card proprietary features. To get SD card status use the HAL_SD_GetCardStatus(). + + *** SD card information *** + =========================== + [..] + (+) To get SD card information, you can use the function HAL_SD_GetCardInfo(). + It returns useful information about the SD card such as block size, card type, + block number ... + + *** SD card CSD register *** + ============================ + (+) The HAL_SD_GetCardCSD() API allows to get the parameters of the CSD register. + Some of the CSD parameters are useful for card initialization and identification. + + *** SD card CID register *** + ============================ + (+) The HAL_SD_GetCardCID() API allows to get the parameters of the CID register. + Some of the CSD parameters are useful for card initialization and identification. + + *** SD HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SD HAL driver. + + (+) __HAL_SD_ENABLE_IT: Enable the SD device interrupt + (+) __HAL_SD_DISABLE_IT: Disable the SD device interrupt + (+) __HAL_SD_GET_FLAG:Check whether the specified SD flag is set or not + (+) __HAL_SD_CLEAR_FLAG: Clear the SD's pending flags + + (@) You can refer to the SD HAL driver header file for more useful macros + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_SD_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) Read_DMADblBuf0CpltCallback : callback when the DMA reception of first buffer is completed. + (+) Read_DMADblBuf1CpltCallback : callback when the DMA reception of second buffer is completed. + (+) Write_DMADblBuf0CpltCallback : callback when the DMA transmission of first buffer is completed. + (+) Write_DMADblBuf1CpltCallback : callback when the DMA transmission of second buffer is completed. + (+) MspInitCallback : SD MspInit. + (+) MspDeInitCallback : SD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + For specific callbacks TransceiverCallback use dedicated register callbacks: + respectively HAL_SD_RegisterTransceiverCallback(). + + Use function HAL_SD_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) Read_DMADblBuf0CpltCallback : callback when the DMA reception of first buffer is completed. + (+) Read_DMADblBuf1CpltCallback : callback when the DMA reception of second buffer is completed. + (+) Write_DMADblBuf0CpltCallback : callback when the DMA transmission of first buffer is completed. + (+) Write_DMADblBuf1CpltCallback : callback when the DMA transmission of second buffer is completed. + (+) MspInitCallback : SD MspInit. + (+) MspDeInitCallback : SD MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + For specific callbacks TransceiverCallback use dedicated unregister callbacks: + respectively HAL_SD_UnRegisterTransceiverCallback(). + + By default, after the HAL_SD_Init and if the state is HAL_SD_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the HAL_SD_Init + and HAL_SD_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SD_Init and HAL_SD_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SD_RegisterCallback before calling HAL_SD_DeInit + or HAL_SD_Init function. + + When The compilation define USE_HAL_SD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup SD + * @{ + */ + +#ifdef HAL_SD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup SD_Private_Defines + * @{ + */ +/* Frequencies used in the driver for clock divider calculation */ +#define SD_INIT_FREQ 400000U /* Initialization phase : 400 kHz max */ +#define SD_NORMAL_SPEED_FREQ 25000000U /* Normal speed phase : 25 MHz max */ +#define SD_HIGH_SPEED_FREQ 50000000U /* High speed phase : 50 MHz max */ +/* Private macro -------------------------------------------------------------*/ +#if defined (DLYB_SDMMC1) && defined (DLYB_SDMMC2) +#define SD_GET_DLYB_INSTANCE(SDMMC_INSTANCE) (((SDMMC_INSTANCE) == SDMMC1)? \ + DLYB_SDMMC1 : DLYB_SDMMC2 ) +#elif defined (DLYB_SDMMC1) +#define SD_GET_DLYB_INSTANCE(SDMMC_INSTANCE) ( DLYB_SDMMC1 ) +#endif /* (DLYB_SDMMC1) && defined (DLYB_SDMMC2) */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions + * @{ + */ +static uint32_t SD_InitCard(SD_HandleTypeDef *hsd); +static uint32_t SD_PowerON(SD_HandleTypeDef *hsd); +static uint32_t SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); +static uint32_t SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus); +static uint32_t SD_WideBus_Enable(SD_HandleTypeDef *hsd); +static uint32_t SD_WideBus_Disable(SD_HandleTypeDef *hsd); +static uint32_t SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR); +static void SD_PowerOFF(SD_HandleTypeDef *hsd); +static void SD_Write_IT(SD_HandleTypeDef *hsd); +static void SD_Read_IT(SD_HandleTypeDef *hsd); +static uint32_t SD_SwitchSpeed(SD_HandleTypeDef *hsd, uint32_t SwitchSpeedMode); +#if (USE_SD_TRANSCEIVER != 0U) +static uint32_t SD_UltraHighSpeed(SD_HandleTypeDef *hsd, uint32_t UltraHighSpeedMode); +static uint32_t SD_DDR_Mode(SD_HandleTypeDef *hsd); +#endif /* USE_SD_TRANSCEIVER */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SD_Exported_Functions + * @{ + */ + +/** @addtogroup SD_Exported_Functions_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize the SD + card device to be ready for use. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SD according to the specified parameters in the + SD_HandleTypeDef and create the associated handle. + * @param hsd: Pointer to the SD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardStatusTypeDef CardStatus; + uint32_t speedgrade; + uint32_t unitsize; + uint32_t tickstart; + + /* Check the SD handle allocation */ + if (hsd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(hsd->Instance)); + assert_param(IS_SDMMC_CLOCK_EDGE(hsd->Init.ClockEdge)); + assert_param(IS_SDMMC_CLOCK_POWER_SAVE(hsd->Init.ClockPowerSave)); + assert_param(IS_SDMMC_BUS_WIDE(hsd->Init.BusWide)); + assert_param(IS_SDMMC_HARDWARE_FLOW_CONTROL(hsd->Init.HardwareFlowControl)); + assert_param(IS_SDMMC_CLKDIV(hsd->Init.ClockDiv)); + + if (hsd->State == HAL_SD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsd->Lock = HAL_UNLOCKED; + +#if (USE_SD_TRANSCEIVER != 0U) + /* Force SDMMC_TRANSCEIVER_PRESENT for Legacy usage */ + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_UNKNOWN) + { + hsd->Init.TranceiverPresent = SDMMC_TRANSCEIVER_PRESENT; + } +#endif /*USE_SD_TRANSCEIVER */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + /* Reset Callback pointers in HAL_SD_STATE_RESET only */ + hsd->TxCpltCallback = HAL_SD_TxCpltCallback; + hsd->RxCpltCallback = HAL_SD_RxCpltCallback; + hsd->ErrorCallback = HAL_SD_ErrorCallback; + hsd->AbortCpltCallback = HAL_SD_AbortCallback; + hsd->Read_DMADblBuf0CpltCallback = HAL_SDEx_Read_DMADoubleBuf0CpltCallback; + hsd->Read_DMADblBuf1CpltCallback = HAL_SDEx_Read_DMADoubleBuf1CpltCallback; + hsd->Write_DMADblBuf0CpltCallback = HAL_SDEx_Write_DMADoubleBuf0CpltCallback; + hsd->Write_DMADblBuf1CpltCallback = HAL_SDEx_Write_DMADoubleBuf1CpltCallback; +#if (USE_SD_TRANSCEIVER != 0U) + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { + hsd->DriveTransceiver_1_8V_Callback = HAL_SD_DriveTransceiver_1_8V_Callback; + } +#endif /* USE_SD_TRANSCEIVER */ + + if (hsd->MspInitCallback == NULL) + { + hsd->MspInitCallback = HAL_SD_MspInit; + } + + /* Init the low level hardware */ + hsd->MspInitCallback(hsd); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_SD_MspInit(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + + hsd->State = HAL_SD_STATE_PROGRAMMING; + + /* Initialize the Card parameters */ + if (HAL_SD_InitCard(hsd) != HAL_OK) + { + return HAL_ERROR; + } + + if (HAL_SD_GetCardStatus(hsd, &CardStatus) != HAL_OK) + { + return HAL_ERROR; + } + /* Get Initial Card Speed from Card Status*/ + speedgrade = CardStatus.UhsSpeedGrade; + unitsize = CardStatus.UhsAllocationUnitSize; + if ((hsd->SdCard.CardType == CARD_SDHC_SDXC) && ((speedgrade != 0U) || (unitsize != 0U))) + { + hsd->SdCard.CardSpeed = CARD_ULTRA_HIGH_SPEED; + } + else + { + if (hsd->SdCard.CardType == CARD_SDHC_SDXC) + { + hsd->SdCard.CardSpeed = CARD_HIGH_SPEED; + } + else + { + hsd->SdCard.CardSpeed = CARD_NORMAL_SPEED; + } + + } + /* Configure the bus wide */ + if (HAL_SD_ConfigWideBusOperation(hsd, hsd->Init.BusWide) != HAL_OK) + { + return HAL_ERROR; + } + + /* Verify that SD card is ready to use after Initialization */ + tickstart = HAL_GetTick(); + while ((HAL_SD_GetCardState(hsd) != HAL_SD_CARD_TRANSFER)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Initialize the error code */ + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + /* Initialize the SD operation */ + hsd->Context = SD_CONTEXT_NONE; + + /* Initialize the SD state */ + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Initializes the SD Card. + * @param hsd: Pointer to SD handle + * @note This function initializes the SD card. It could be used when a card + re-initialization is needed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd) +{ + uint32_t errorstate; + SD_InitTypeDef Init; + uint32_t sdmmc_clk; + + /* Default SDMMC peripheral configuration for SD card initialization */ + Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING; + Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE; + Init.BusWide = SDMMC_BUS_WIDE_1B; + Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE; + + /* Init Clock should be less or equal to 400Khz*/ + sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC); + if (sdmmc_clk == 0U) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode = SDMMC_ERROR_INVALID_PARAMETER; + return HAL_ERROR; + } + Init.ClockDiv = sdmmc_clk / (2U * SD_INIT_FREQ); + +#if (USE_SD_TRANSCEIVER != 0U) + Init.TranceiverPresent = hsd->Init.TranceiverPresent; + + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { + /* Set Transceiver polarity */ + hsd->Instance->POWER |= SDMMC_POWER_DIRPOL; + } +#elif defined (USE_SD_DIRPOL) + /* Set Transceiver polarity */ + hsd->Instance->POWER |= SDMMC_POWER_DIRPOL; +#endif /* USE_SD_TRANSCEIVER */ + + /* Initialize SDMMC peripheral interface with default configuration */ + (void)SDMMC_Init(hsd->Instance, Init); + + /* Set Power State to ON */ + (void)SDMMC_PowerState_ON(hsd->Instance); + + /* wait 74 Cycles: required power up waiting time before starting + the SD initialization sequence */ + if (Init.ClockDiv != 0U) + { + sdmmc_clk = sdmmc_clk / (2U * Init.ClockDiv); + } + + if (sdmmc_clk != 0U) + { + HAL_Delay(1U + (74U * 1000U / (sdmmc_clk))); + } + + /* Identify card operating voltage */ + errorstate = SD_PowerON(hsd); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Card initialization */ + errorstate = SD_InitCard(hsd); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief De-Initializes the SD card. + * @param hsd: Pointer to SD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd) +{ + /* Check the SD handle allocation */ + if (hsd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(hsd->Instance)); + + hsd->State = HAL_SD_STATE_BUSY; + +#if (USE_SD_TRANSCEIVER != 0U) + /* Deactivate the 1.8V Mode */ + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + if (hsd->DriveTransceiver_1_8V_Callback == NULL) + { + hsd->DriveTransceiver_1_8V_Callback = HAL_SD_DriveTransceiver_1_8V_Callback; + } + hsd->DriveTransceiver_1_8V_Callback(RESET); +#else + HAL_SD_DriveTransceiver_1_8V_Callback(RESET); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } +#endif /* USE_SD_TRANSCEIVER */ + + /* Set SD power state to off */ + SD_PowerOFF(hsd); + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + if (hsd->MspDeInitCallback == NULL) + { + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + } + + /* DeInit the low level hardware */ + hsd->MspDeInitCallback(hsd); +#else + /* De-Initialize the MSP layer */ + HAL_SD_MspDeInit(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_RESET; + + return HAL_OK; +} + + +/** + * @brief Initializes the SD MSP. + * @param hsd: Pointer to SD handle + * @retval None + */ +__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_MspInit could be implemented in the user file + */ +} + +/** + * @brief De-Initialize SD MSP. + * @param hsd: Pointer to SD handle + * @retval None + */ +__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group2 + * @brief Data transfer functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the data + transfer from/to SD card. + +@endverbatim + * @{ + */ + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd: Pointer to SD handle + * @param pData: pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of SD blocks to read + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, + uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t data; + uint32_t dataremaining; + uint32_t add = BlockAdd; + uint8_t *tempbuff = pData; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + /* Read block(s) in polling mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = SD_CONTEXT_READ_MULTIPLE_BLOCK; + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = SD_CONTEXT_READ_SINGLE_BLOCK; + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Poll on SDMMC flags */ + dataremaining = config.DataLength; + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF) && (dataremaining >= 32U)) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < 8U; count++) + { + data = SDMMC_ReadFIFO(hsd->Instance); + *tempbuff = (uint8_t)(data & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 8U) & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 16U) & 0xFFU); + tempbuff++; + *tempbuff = (uint8_t)((data >> 24U) & 0xFFU); + tempbuff++; + } + dataremaining -= 32U; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + + /* Send stop transmission command in case of multiblock read */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + } + } + + /* Get error state */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Allows to write block(s) to a specified address in a card. The Data + * transfer is managed by polling mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd: Pointer to SD handle + * @param pData: pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of SD blocks to write + * @param Timeout: Specify timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks, uint32_t Timeout) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t data; + uint32_t dataremaining; + uint32_t add = BlockAdd; + const uint8_t *tempbuff = pData; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = NumberOfBlocks * BLOCKSIZE; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = SD_CONTEXT_WRITE_MULTIPLE_BLOCK; + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = SD_CONTEXT_WRITE_SINGLE_BLOCK; + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Write block(s) in polling mode */ + dataremaining = config.DataLength; + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_TXFIFOHE) && (dataremaining >= 32U)) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < 8U; count++) + { + data = (uint32_t)(*tempbuff); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 8U); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 16U); + tempbuff++; + data |= ((uint32_t)(*tempbuff) << 24U); + tempbuff++; + (void)SDMMC_WriteFIFO(hsd->Instance, &data); + } + dataremaining -= 32U; + } + + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_TIMEOUT; + } + } + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + + /* Send stop transmission command in case of multiblock write */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1U)) + { + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send stop transmission command */ + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + } + } + + /* Get error state */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_TXUNDERR)) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the IT transfer process through the SD Rx + * interrupt event. + * @param hsd: Pointer to SD handle + * @param pData: Pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pRxBuffPtr = pData; + hsd->RxXferSize = BLOCKSIZE * NumberOfBlocks; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + /* Read Blocks in IT mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_IT); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = (SD_CONTEXT_READ_SINGLE_BLOCK | SD_CONTEXT_IT); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_RXFIFOHF)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed in interrupt mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the IT transfer process through the SD Tx + * interrupt event. + * @param hsd: Pointer to SD handle + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pTxBuffPtr = pData; + hsd->TxXferSize = BLOCKSIZE * NumberOfBlocks; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK | SD_CONTEXT_IT); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = (SD_CONTEXT_WRITE_SINGLE_BLOCK | SD_CONTEXT_IT); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | + SDMMC_FLAG_TXFIFOHE)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the DMA transfer process through the SD Rx + * interrupt event. + * @param hsd: Pointer SD handle + * @param pData: Pointer to the buffer that will contain the received data + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Number of blocks to read. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pRxBuffPtr = pData; + hsd->RxXferSize = BLOCKSIZE * NumberOfBlocks; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + hsd->Instance->IDMABASE0 = (uint32_t) pData ; + hsd->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF; + + /* Read Blocks in DMA mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = (SD_CONTEXT_READ_SINGLE_BLOCK | SD_CONTEXT_DMA); + + /* Read Single Block command */ + errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND)); + + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Writes block(s) to a specified address in a card. The Data transfer + * is managed by DMA mode. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @note You could also check the DMA transfer process through the SD Tx + * interrupt event. + * @param hsd: Pointer to SD handle + * @param pData: Pointer to the buffer that will contain the data to transmit + * @param BlockAdd: Block Address where data will be written + * @param NumberOfBlocks: Number of blocks to write + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, const uint8_t *pData, uint32_t BlockAdd, + uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t add = BlockAdd; + + if (NULL == pData) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0U; + + hsd->pTxBuffPtr = pData; + hsd->TxXferSize = BLOCKSIZE * NumberOfBlocks; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + hsd->Instance->IDMABASE0 = (uint32_t) pData ; + hsd->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF; + + /* Write Blocks in Polling mode */ + if (NumberOfBlocks > 1U) + { + hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add); + } + else + { + hsd->Context = (SD_CONTEXT_WRITE_SINGLE_BLOCK | SD_CONTEXT_DMA); + + /* Write Single Block command */ + errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add); + } + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + return HAL_ERROR; + } + + /* Enable transfer interrupts */ + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Erases the specified memory area of the given SD card. + * @note This API should be followed by a check on the card state through + * HAL_SD_GetCardState(). + * @param hsd: Pointer to SD handle + * @param BlockStartAdd: Start Block address + * @param BlockEndAdd: End Block address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd) +{ + uint32_t errorstate; + uint32_t start_add = BlockStartAdd; + uint32_t end_add = BlockEndAdd; + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + if (end_add < start_add) + { + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + return HAL_ERROR; + } + + if (end_add > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_BUSY; + + /* Check if the card command class supports erase command */ + if (((hsd->SdCard.Class) & SDMMC_CCCC_ERASE) == 0U) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Get start and end block for high capacity cards */ + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + start_add *= 512U; + end_add *= 512U; + } + + /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */ + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD32 SD_ERASE_GRP_START with argument as addr */ + errorstate = SDMMC_CmdSDEraseStartAdd(hsd->Instance, start_add); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + /* Send CMD33 SD_ERASE_GRP_END with argument as addr */ + errorstate = SDMMC_CmdSDEraseEndAdd(hsd->Instance, end_add); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + } + + /* Send CMD38 ERASE */ + errorstate = SDMMC_CmdErase(hsd->Instance, 0UL); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + hsd->State = HAL_SD_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief This function handles SD card interrupt request. + * @param hsd: Pointer to SD handle + * @retval None + */ +void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd) +{ + uint32_t errorstate; + uint32_t context = hsd->Context; + + /* Check for SDMMC interrupt flags */ + if ((__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF) != RESET) && ((context & SD_CONTEXT_IT) != 0U)) + { + SD_Read_IT(hsd); + } + + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DATAEND) != RESET) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DATAEND); + + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR | SDMMC_IT_TXFIFOHE | \ + SDMMC_IT_RXFIFOHF); + + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_IDMABTC); + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + + if ((context & SD_CONTEXT_IT) != 0U) + { + if (((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + if (((context & SD_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->RxCpltCallback(hsd); +#else + HAL_SD_RxCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + else + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->TxCpltCallback(hsd); +#else + HAL_SD_TxCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + else if ((context & SD_CONTEXT_DMA) != 0U) + { + hsd->Instance->DLEN = 0; + hsd->Instance->DCTRL = 0; + hsd->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Stop Transfer for Write Multi blocks or Read Multi blocks */ + if (((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { + errorstate = SDMMC_CmdStopTransfer(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; + if (((context & SD_CONTEXT_WRITE_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->TxCpltCallback(hsd); +#else + HAL_SD_TxCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + if (((context & SD_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U)) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->RxCpltCallback(hsd); +#else + HAL_SD_RxCpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } + + else if ((__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_TXFIFOHE) != RESET) && ((context & SD_CONTEXT_IT) != 0U)) + { + SD_Write_IT(hsd); + } + + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_RXOVERR | + SDMMC_FLAG_TXUNDERR) != RESET) + { + /* Set Error code */ + if (__HAL_SD_GET_FLAG(hsd, SDMMC_IT_DCRCFAIL) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL; + } + if (__HAL_SD_GET_FLAG(hsd, SDMMC_IT_DTIMEOUT) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT; + } + if (__HAL_SD_GET_FLAG(hsd, SDMMC_IT_RXOVERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN; + } + if (__HAL_SD_GET_FLAG(hsd, SDMMC_IT_TXUNDERR) != RESET) + { + hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN; + } + + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + /* Disable all interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + hsd->Instance->DCTRL |= SDMMC_DCTRL_FIFORST; + hsd->Instance->CMD |= SDMMC_CMD_CMDSTOP; + hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance); + hsd->Instance->CMD &= ~(SDMMC_CMD_CMDSTOP); + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DABORT); + + if ((context & SD_CONTEXT_IT) != 0U) + { + /* Set the SD state to ready to be able to start again the process */ + hsd->State = HAL_SD_STATE_READY; + hsd->Context = SD_CONTEXT_NONE; +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + else if ((context & SD_CONTEXT_DMA) != 0U) + { + if (hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + /* Disable Internal DMA */ + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_IDMABTC); + hsd->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Set the SD state to ready to be able to start again the process */ + hsd->State = HAL_SD_STATE_READY; +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->ErrorCallback(hsd); +#else + HAL_SD_ErrorCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + } + + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_IDMABTC) != RESET) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_IDMABTC); + if (READ_BIT(hsd->Instance->IDMACTRL, SDMMC_IDMA_IDMABACT) == 0U) + { + /* Current buffer is buffer0, Transfer complete for buffer1 */ + if ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->Write_DMADblBuf1CpltCallback(hsd); +#else + HAL_SDEx_Write_DMADoubleBuf1CpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + else /* SD_CONTEXT_READ_MULTIPLE_BLOCK */ + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->Read_DMADblBuf1CpltCallback(hsd); +#else + HAL_SDEx_Read_DMADoubleBuf1CpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + else /* SD_DMA_BUFFER1 */ + { + /* Current buffer is buffer1, Transfer complete for buffer0 */ + if ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U) + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->Write_DMADblBuf0CpltCallback(hsd); +#else + HAL_SDEx_Write_DMADoubleBuf0CpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + else /* SD_CONTEXT_READ_MULTIPLE_BLOCK */ + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->Read_DMADblBuf0CpltCallback(hsd); +#else + HAL_SDEx_Read_DMADoubleBuf0CpltCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief return the SD state + * @param hsd: Pointer to sd handle + * @retval HAL state + */ +HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd) +{ + return hsd->State; +} + +/** + * @brief Return the SD error code + * @param hsd : Pointer to a SD_HandleTypeDef structure that contains + * the configuration information. + * @retval SD Error Code + */ +uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd) +{ + return hsd->ErrorCode; +} + +/** + * @brief Tx Transfer completed callbacks + * @param hsd: Pointer to SD handle + * @retval None + */ +__weak void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_TxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hsd: Pointer SD handle + * @retval None + */ +__weak void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_RxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief SD error callbacks + * @param hsd: Pointer SD handle + * @retval None + */ +__weak void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_ErrorCallback can be implemented in the user file + */ +} + +/** + * @brief SD Abort callbacks + * @param hsd: Pointer SD handle + * @retval None + */ +__weak void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_AbortCallback can be implemented in the user file + */ +} + +#if (USE_SD_TRANSCEIVER != 0U) +/** + * @brief Enable/Disable the SD Transceiver 1.8V Mode Callback. + * @param status: Voltage Switch State + * @retval None + */ +__weak void HAL_SD_DriveTransceiver_1_8V_Callback(FlagStatus status) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(status); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SD_EnableTransceiver could be implemented in the user file + */ +} +#endif /* USE_SD_TRANSCEIVER */ + +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User SD Callback + * To be used instead of the weak (surcharged) predefined callback + * @note The HAL_SD_RegisterCallback() may be called before HAL_SD_Init() in + * HAL_SD_STATE_RESET to register callbacks for HAL_SD_MSP_INIT_CB_ID + * and HAL_SD_MSP_DEINIT_CB_ID. + * @param hsd : SD handle + * @param CallbackID : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID + * @arg @ref HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID + * @arg @ref HAL_SD_ERROR_CB_ID SD Error Callback ID + * @arg @ref HAL_SD_ABORT_CB_ID SD Abort Callback ID + * @arg @ref HAL_SD_READ_DMA_DBL_BUF0_CPLT_CB_ID SD DMA Rx Double buffer 0 Callback ID + * @arg @ref HAL_SD_READ_DMA_DBL_BUF1_CPLT_CB_ID SD DMA Rx Double buffer 1 Callback ID + * @arg @ref HAL_SD_WRITE_DMA_DBL_BUF0_CPLT_CB_ID SD DMA Tx Double buffer 0 Callback ID + * @arg @ref HAL_SD_WRITE_DMA_DBL_BUF1_CPLT_CB_ID SD DMA Tx Double buffer 1 Callback ID + * @arg @ref HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID + * @arg @ref HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SD_RegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, + pSD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hsd->State == HAL_SD_STATE_READY) + { + switch (CallbackID) + { + case HAL_SD_TX_CPLT_CB_ID : + hsd->TxCpltCallback = pCallback; + break; + case HAL_SD_RX_CPLT_CB_ID : + hsd->RxCpltCallback = pCallback; + break; + case HAL_SD_ERROR_CB_ID : + hsd->ErrorCallback = pCallback; + break; + case HAL_SD_ABORT_CB_ID : + hsd->AbortCpltCallback = pCallback; + break; + case HAL_SD_READ_DMA_DBL_BUF0_CPLT_CB_ID : + hsd->Read_DMADblBuf0CpltCallback = pCallback; + break; + case HAL_SD_READ_DMA_DBL_BUF1_CPLT_CB_ID : + hsd->Read_DMADblBuf1CpltCallback = pCallback; + break; + case HAL_SD_WRITE_DMA_DBL_BUF0_CPLT_CB_ID : + hsd->Write_DMADblBuf0CpltCallback = pCallback; + break; + case HAL_SD_WRITE_DMA_DBL_BUF1_CPLT_CB_ID : + hsd->Write_DMADblBuf1CpltCallback = pCallback; + break; + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = pCallback; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsd->State == HAL_SD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = pCallback; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User SD Callback + * SD Callback is redirected to the weak (surcharged) predefined callback + * @note The HAL_SD_UnRegisterCallback() may be called before HAL_SD_Init() in + * HAL_SD_STATE_RESET to register callbacks for HAL_SD_MSP_INIT_CB_ID + * and HAL_SD_MSP_DEINIT_CB_ID. + * @param hsd : SD handle + * @param CallbackID : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID + * @arg @ref HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID + * @arg @ref HAL_SD_ERROR_CB_ID SD Error Callback ID + * @arg @ref HAL_SD_ABORT_CB_ID SD Abort Callback ID + * @arg @ref HAL_SD_READ_DMA_DBL_BUF0_CPLT_CB_ID SD DMA Rx Double buffer 0 Callback ID + * @arg @ref HAL_SD_READ_DMA_DBL_BUF1_CPLT_CB_ID SD DMA Rx Double buffer 1 Callback ID + * @arg @ref HAL_SD_WRITE_DMA_DBL_BUF0_CPLT_CB_ID SD DMA Tx Double buffer 0 Callback ID + * @arg @ref HAL_SD_WRITE_DMA_DBL_BUF1_CPLT_CB_ID SD DMA Tx Double buffer 1 Callback ID + * @arg @ref HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID + * @arg @ref HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (hsd->State == HAL_SD_STATE_READY) + { + switch (CallbackID) + { + case HAL_SD_TX_CPLT_CB_ID : + hsd->TxCpltCallback = HAL_SD_TxCpltCallback; + break; + case HAL_SD_RX_CPLT_CB_ID : + hsd->RxCpltCallback = HAL_SD_RxCpltCallback; + break; + case HAL_SD_ERROR_CB_ID : + hsd->ErrorCallback = HAL_SD_ErrorCallback; + break; + case HAL_SD_ABORT_CB_ID : + hsd->AbortCpltCallback = HAL_SD_AbortCallback; + break; + case HAL_SD_READ_DMA_DBL_BUF0_CPLT_CB_ID : + hsd->Read_DMADblBuf0CpltCallback = HAL_SDEx_Read_DMADoubleBuf0CpltCallback; + break; + case HAL_SD_READ_DMA_DBL_BUF1_CPLT_CB_ID : + hsd->Read_DMADblBuf1CpltCallback = HAL_SDEx_Read_DMADoubleBuf1CpltCallback; + break; + case HAL_SD_WRITE_DMA_DBL_BUF0_CPLT_CB_ID : + hsd->Write_DMADblBuf0CpltCallback = HAL_SDEx_Write_DMADoubleBuf0CpltCallback; + break; + case HAL_SD_WRITE_DMA_DBL_BUF1_CPLT_CB_ID : + hsd->Write_DMADblBuf1CpltCallback = HAL_SDEx_Write_DMADoubleBuf1CpltCallback; + break; + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = HAL_SD_MspInit; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsd->State == HAL_SD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SD_MSP_INIT_CB_ID : + hsd->MspInitCallback = HAL_SD_MspInit; + break; + case HAL_SD_MSP_DEINIT_CB_ID : + hsd->MspDeInitCallback = HAL_SD_MspDeInit; + break; + default : + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +#if (USE_SD_TRANSCEIVER != 0U) +/** + * @brief Register a User SD Transceiver Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hsd : SD handle + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SD_RegisterTransceiverCallback(SD_HandleTypeDef *hsd, pSD_TransceiverCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsd); + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->DriveTransceiver_1_8V_Callback = pCallback; + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsd); + return status; +} + +/** + * @brief Unregister a User SD Transceiver Callback + * SD Callback is redirected to the weak (surcharged) predefined callback + * @param hsd : SD handle + * @retval status + */ +HAL_StatusTypeDef HAL_SD_UnRegisterTransceiverCallback(SD_HandleTypeDef *hsd) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hsd); + + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->DriveTransceiver_1_8V_Callback = HAL_SD_DriveTransceiver_1_8V_Callback; + } + else + { + /* Update the error code */ + hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsd); + return status; +} +#endif /* USE_SD_TRANSCEIVER */ +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup SD_Exported_Functions_Group3 + * @brief management functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the SD card + operations and get the related information + +@endverbatim + * @{ + */ + +/** + * @brief Returns information the information of the card which are stored on + * the CID register. + * @param hsd: Pointer to SD handle + * @param pCID: Pointer to a HAL_SD_CardCIDTypeDef structure that + * contains all CID register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID) +{ + pCID->ManufacturerID = (uint8_t)((hsd->CID[0] & 0xFF000000U) >> 24U); + + pCID->OEM_AppliID = (uint16_t)((hsd->CID[0] & 0x00FFFF00U) >> 8U); + + pCID->ProdName1 = (((hsd->CID[0] & 0x000000FFU) << 24U) | ((hsd->CID[1] & 0xFFFFFF00U) >> 8U)); + + pCID->ProdName2 = (uint8_t)(hsd->CID[1] & 0x000000FFU); + + pCID->ProdRev = (uint8_t)((hsd->CID[2] & 0xFF000000U) >> 24U); + + pCID->ProdSN = (((hsd->CID[2] & 0x00FFFFFFU) << 8U) | ((hsd->CID[3] & 0xFF000000U) >> 24U)); + + pCID->Reserved1 = (uint8_t)((hsd->CID[3] & 0x00F00000U) >> 20U); + + pCID->ManufactDate = (uint16_t)((hsd->CID[3] & 0x000FFF00U) >> 8U); + + pCID->CID_CRC = (uint8_t)((hsd->CID[3] & 0x000000FEU) >> 1U); + + pCID->Reserved2 = 1U; + + return HAL_OK; +} + +/** + * @brief Returns information the information of the card which are stored on + * the CSD register. + * @param hsd: Pointer to SD handle + * @param pCSD: Pointer to a HAL_SD_CardCSDTypeDef structure that + * contains all CSD register parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD) +{ + pCSD->CSDStruct = (uint8_t)((hsd->CSD[0] & 0xC0000000U) >> 30U); + + pCSD->SysSpecVersion = (uint8_t)((hsd->CSD[0] & 0x3C000000U) >> 26U); + + pCSD->Reserved1 = (uint8_t)((hsd->CSD[0] & 0x03000000U) >> 24U); + + pCSD->TAAC = (uint8_t)((hsd->CSD[0] & 0x00FF0000U) >> 16U); + + pCSD->NSAC = (uint8_t)((hsd->CSD[0] & 0x0000FF00U) >> 8U); + + pCSD->MaxBusClkFrec = (uint8_t)(hsd->CSD[0] & 0x000000FFU); + + pCSD->CardComdClasses = (uint16_t)((hsd->CSD[1] & 0xFFF00000U) >> 20U); + + pCSD->RdBlockLen = (uint8_t)((hsd->CSD[1] & 0x000F0000U) >> 16U); + + pCSD->PartBlockRead = (uint8_t)((hsd->CSD[1] & 0x00008000U) >> 15U); + + pCSD->WrBlockMisalign = (uint8_t)((hsd->CSD[1] & 0x00004000U) >> 14U); + + pCSD->RdBlockMisalign = (uint8_t)((hsd->CSD[1] & 0x00002000U) >> 13U); + + pCSD->DSRImpl = (uint8_t)((hsd->CSD[1] & 0x00001000U) >> 12U); + + pCSD->Reserved2 = 0U; /*!< Reserved */ + + if (hsd->SdCard.CardType == CARD_SDSC) + { + pCSD->DeviceSize = (((hsd->CSD[1] & 0x000003FFU) << 2U) | ((hsd->CSD[2] & 0xC0000000U) >> 30U)); + + pCSD->MaxRdCurrentVDDMin = (uint8_t)((hsd->CSD[2] & 0x38000000U) >> 27U); + + pCSD->MaxRdCurrentVDDMax = (uint8_t)((hsd->CSD[2] & 0x07000000U) >> 24U); + + pCSD->MaxWrCurrentVDDMin = (uint8_t)((hsd->CSD[2] & 0x00E00000U) >> 21U); + + pCSD->MaxWrCurrentVDDMax = (uint8_t)((hsd->CSD[2] & 0x001C0000U) >> 18U); + + pCSD->DeviceSizeMul = (uint8_t)((hsd->CSD[2] & 0x00038000U) >> 15U); + + hsd->SdCard.BlockNbr = (pCSD->DeviceSize + 1U) ; + hsd->SdCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U)); + hsd->SdCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU)); + + hsd->SdCard.LogBlockNbr = (hsd->SdCard.BlockNbr) * ((hsd->SdCard.BlockSize) / 512U); + hsd->SdCard.LogBlockSize = 512U; + } + else if (hsd->SdCard.CardType == CARD_SDHC_SDXC) + { + /* Byte 7 */ + pCSD->DeviceSize = (((hsd->CSD[1] & 0x0000003FU) << 16U) | ((hsd->CSD[2] & 0xFFFF0000U) >> 16U)); + + hsd->SdCard.BlockNbr = ((pCSD->DeviceSize + 1U) * 1024U); + hsd->SdCard.LogBlockNbr = hsd->SdCard.BlockNbr; + hsd->SdCard.BlockSize = 512U; + hsd->SdCard.LogBlockSize = hsd->SdCard.BlockSize; + } + else + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + hsd->State = HAL_SD_STATE_READY; + return HAL_ERROR; + } + + pCSD->EraseGrSize = (uint8_t)((hsd->CSD[2] & 0x00004000U) >> 14U); + + pCSD->EraseGrMul = (uint8_t)((hsd->CSD[2] & 0x00003F80U) >> 7U); + + pCSD->WrProtectGrSize = (uint8_t)(hsd->CSD[2] & 0x0000007FU); + + pCSD->WrProtectGrEnable = (uint8_t)((hsd->CSD[3] & 0x80000000U) >> 31U); + + pCSD->ManDeflECC = (uint8_t)((hsd->CSD[3] & 0x60000000U) >> 29U); + + pCSD->WrSpeedFact = (uint8_t)((hsd->CSD[3] & 0x1C000000U) >> 26U); + + pCSD->MaxWrBlockLen = (uint8_t)((hsd->CSD[3] & 0x03C00000U) >> 22U); + + pCSD->WriteBlockPaPartial = (uint8_t)((hsd->CSD[3] & 0x00200000U) >> 21U); + + pCSD->Reserved3 = 0; + + pCSD->ContentProtectAppli = (uint8_t)((hsd->CSD[3] & 0x00010000U) >> 16U); + + pCSD->FileFormatGroup = (uint8_t)((hsd->CSD[3] & 0x00008000U) >> 15U); + + pCSD->CopyFlag = (uint8_t)((hsd->CSD[3] & 0x00004000U) >> 14U); + + pCSD->PermWrProtect = (uint8_t)((hsd->CSD[3] & 0x00002000U) >> 13U); + + pCSD->TempWrProtect = (uint8_t)((hsd->CSD[3] & 0x00001000U) >> 12U); + + pCSD->FileFormat = (uint8_t)((hsd->CSD[3] & 0x00000C00U) >> 10U); + + pCSD->ECC = (uint8_t)((hsd->CSD[3] & 0x00000300U) >> 8U); + + pCSD->CSD_CRC = (uint8_t)((hsd->CSD[3] & 0x000000FEU) >> 1U); + + pCSD->Reserved4 = 1; + + return HAL_OK; +} + +/** + * @brief Gets the SD status info.( shall be called if there is no SD transaction ongoing ) + * @param hsd: Pointer to SD handle + * @param pStatus: Pointer to the HAL_SD_CardStatusTypeDef structure that + * will contain the SD card status information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus) +{ + uint32_t sd_status[16]; + uint32_t errorstate; + HAL_StatusTypeDef status = HAL_OK; + + if (hsd->State == HAL_SD_STATE_BUSY) + { + return HAL_ERROR; + } + + errorstate = SD_SendSDStatus(hsd, sd_status); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + hsd->State = HAL_SD_STATE_READY; + status = HAL_ERROR; + } + else + { + pStatus->DataBusWidth = (uint8_t)((sd_status[0] & 0xC0U) >> 6U); + + pStatus->SecuredMode = (uint8_t)((sd_status[0] & 0x20U) >> 5U); + + pStatus->CardType = (uint16_t)(((sd_status[0] & 0x00FF0000U) >> 8U) | ((sd_status[0] & 0xFF000000U) >> 24U)); + + pStatus->ProtectedAreaSize = (((sd_status[1] & 0xFFU) << 24U) | ((sd_status[1] & 0xFF00U) << 8U) | + ((sd_status[1] & 0xFF0000U) >> 8U) | ((sd_status[1] & 0xFF000000U) >> 24U)); + + pStatus->SpeedClass = (uint8_t)(sd_status[2] & 0xFFU); + + pStatus->PerformanceMove = (uint8_t)((sd_status[2] & 0xFF00U) >> 8U); + + pStatus->AllocationUnitSize = (uint8_t)((sd_status[2] & 0xF00000U) >> 20U); + + pStatus->EraseSize = (uint16_t)(((sd_status[2] & 0xFF000000U) >> 16U) | (sd_status[3] & 0xFFU)); + + pStatus->EraseTimeout = (uint8_t)((sd_status[3] & 0xFC00U) >> 10U); + + pStatus->EraseOffset = (uint8_t)((sd_status[3] & 0x0300U) >> 8U); + + pStatus->UhsSpeedGrade = (uint8_t)((sd_status[3] & 0x00F0U) >> 4U); + pStatus->UhsAllocationUnitSize = (uint8_t)(sd_status[3] & 0x000FU) ; + pStatus->VideoSpeedClass = (uint8_t)((sd_status[4] & 0xFF000000U) >> 24U); + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode = errorstate; + hsd->State = HAL_SD_STATE_READY; + status = HAL_ERROR; + } + + + return status; +} + +/** + * @brief Gets the SD card info. + * @param hsd: Pointer to SD handle + * @param pCardInfo: Pointer to the HAL_SD_CardInfoTypeDef structure that + * will contain the SD card status information + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo) +{ + pCardInfo->CardType = (uint32_t)(hsd->SdCard.CardType); + pCardInfo->CardVersion = (uint32_t)(hsd->SdCard.CardVersion); + pCardInfo->Class = (uint32_t)(hsd->SdCard.Class); + pCardInfo->RelCardAdd = (uint32_t)(hsd->SdCard.RelCardAdd); + pCardInfo->BlockNbr = (uint32_t)(hsd->SdCard.BlockNbr); + pCardInfo->BlockSize = (uint32_t)(hsd->SdCard.BlockSize); + pCardInfo->LogBlockNbr = (uint32_t)(hsd->SdCard.LogBlockNbr); + pCardInfo->LogBlockSize = (uint32_t)(hsd->SdCard.LogBlockSize); + + return HAL_OK; +} + +/** + * @brief Enables wide bus operation for the requested card if supported by + * card. + * @param hsd: Pointer to SD handle + * @param WideMode: Specifies the SD card wide bus mode + * This parameter can be one of the following values: + * @arg SDMMC_BUS_WIDE_8B: 8-bit data transfer + * @arg SDMMC_BUS_WIDE_4B: 4-bit data transfer + * @arg SDMMC_BUS_WIDE_1B: 1-bit data transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode) +{ + SDMMC_InitTypeDef Init; + uint32_t errorstate; + uint32_t sdmmc_clk; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_SDMMC_BUS_WIDE(WideMode)); + + /* Change State */ + hsd->State = HAL_SD_STATE_BUSY; + + if (hsd->SdCard.CardType != CARD_SECURED) + { + if (WideMode == SDMMC_BUS_WIDE_8B) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + else if (WideMode == SDMMC_BUS_WIDE_4B) + { + errorstate = SD_WideBus_Enable(hsd); + + hsd->ErrorCode |= errorstate; + } + else if (WideMode == SDMMC_BUS_WIDE_1B) + { + errorstate = SD_WideBus_Disable(hsd); + + hsd->ErrorCode |= errorstate; + } + else + { + /* WideMode is not a valid argument*/ + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + } + } + else + { + /* SD Card does not support this feature */ + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + if (hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + status = HAL_ERROR; + } + else + { + sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC); + if (sdmmc_clk != 0U) + { + /* Configure the SDMMC peripheral */ + Init.ClockEdge = hsd->Init.ClockEdge; + Init.ClockPowerSave = hsd->Init.ClockPowerSave; + Init.BusWide = WideMode; + Init.HardwareFlowControl = hsd->Init.HardwareFlowControl; + + /* Check if user Clock div < Normal speed 25Mhz, no change in Clockdiv */ + if (hsd->Init.ClockDiv >= (sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ))) + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + else if (hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) + { + /* UltraHigh speed SD card,user Clock div */ + Init.ClockDiv = hsd->Init.ClockDiv; + } + else if (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) + { + /* High speed SD card, Max Frequency = 50Mhz */ + if (hsd->Init.ClockDiv == 0U) + { + if (sdmmc_clk > SD_HIGH_SPEED_FREQ) + { + Init.ClockDiv = sdmmc_clk / (2U * SD_HIGH_SPEED_FREQ); + } + else + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + } + else + { + if ((sdmmc_clk / (2U * hsd->Init.ClockDiv)) > SD_HIGH_SPEED_FREQ) + { + Init.ClockDiv = sdmmc_clk / (2U * SD_HIGH_SPEED_FREQ); + } + else + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + } + } + else + { + /* No High speed SD card, Max Frequency = 25Mhz */ + if (hsd->Init.ClockDiv == 0U) + { + if (sdmmc_clk > SD_NORMAL_SPEED_FREQ) + { + Init.ClockDiv = sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ); + } + else + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + } + else + { + if ((sdmmc_clk / (2U * hsd->Init.ClockDiv)) > SD_NORMAL_SPEED_FREQ) + { + Init.ClockDiv = sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ); + } + else + { + Init.ClockDiv = hsd->Init.ClockDiv; + } + } + } + +#if (USE_SD_TRANSCEIVER != 0U) + Init.TranceiverPresent = hsd->Init.TranceiverPresent; +#endif /* USE_SD_TRANSCEIVER */ + + (void)SDMMC_Init(hsd->Instance, Init); + } + else + { + hsd->ErrorCode |= SDMMC_ERROR_INVALID_PARAMETER; + status = HAL_ERROR; + } + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + status = HAL_ERROR; + } + + /* Change State */ + hsd->State = HAL_SD_STATE_READY; + + return status; +} + +/** + * @brief Configure the speed bus mode + * @param hsd: Pointer to the SD handle + * @param SpeedMode: Specifies the SD card speed bus mode + * This parameter can be one of the following values: + * @arg SDMMC_SPEED_MODE_AUTO: Max speed mode supported by the card + * @arg SDMMC_SPEED_MODE_DEFAULT: Default Speed/SDR12 mode + * @arg SDMMC_SPEED_MODE_HIGH: High Speed/SDR25 mode + * @arg SDMMC_SPEED_MODE_ULTRA: Ultra high speed mode + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode) +{ + uint32_t tickstart; + uint32_t errorstate; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_SDMMC_SPEED_MODE(SpeedMode)); + /* Change State */ + hsd->State = HAL_SD_STATE_BUSY; + +#if (USE_SD_TRANSCEIVER != 0U) + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { + switch (SpeedMode) + { + case SDMMC_SPEED_MODE_AUTO: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + hsd->Instance->CLKCR |= SDMMC_CLKCR_BUSSPEED; + /* Enable Ultra High Speed */ + if (SD_UltraHighSpeed(hsd, SDMMC_SDR104_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + } + else if (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + /*Nothing to do, Use defaultSpeed */ + } + break; + } + case SDMMC_SPEED_MODE_ULTRA_SDR104: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable UltraHigh Speed */ + if (SD_UltraHighSpeed(hsd, SDMMC_SDR104_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + hsd->Instance->CLKCR |= SDMMC_CLKCR_BUSSPEED; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_ULTRA_SDR50: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable UltraHigh Speed */ + if (SD_UltraHighSpeed(hsd, SDMMC_SDR50_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + hsd->Instance->CLKCR |= SDMMC_CLKCR_BUSSPEED; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DDR: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable DDR Mode*/ + if (SD_DDR_Mode(hsd) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + hsd->Instance->CLKCR |= SDMMC_CLKCR_BUSSPEED | SDMMC_CLKCR_DDR; + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_HIGH: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DEFAULT: + { + /* Switch to default Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR12_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + + break; + } + default: + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + status = HAL_ERROR; + break; + } + } + else + { + switch (SpeedMode) + { + case SDMMC_SPEED_MODE_AUTO: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + /*Nothing to do, Use defaultSpeed */ + } + break; + } + case SDMMC_SPEED_MODE_HIGH: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DEFAULT: + { + /* Switch to default Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR12_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + + break; + } + case SDMMC_SPEED_MODE_ULTRA: /*not valid without transceiver*/ + default: + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + status = HAL_ERROR; + break; + } + } +#else + switch (SpeedMode) + { + case SDMMC_SPEED_MODE_AUTO: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + /*Nothing to do, Use defaultSpeed */ + } + break; + } + case SDMMC_SPEED_MODE_HIGH: + { + if ((hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) || + (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED) || + (hsd->SdCard.CardType == CARD_SDHC_SDXC)) + { + /* Enable High Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR25_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + } + else + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + break; + } + case SDMMC_SPEED_MODE_DEFAULT: + { + /* Switch to default Speed */ + if (SD_SwitchSpeed(hsd, SDMMC_SDR12_SWITCH_PATTERN) != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE; + status = HAL_ERROR; + } + + break; + } + case SDMMC_SPEED_MODE_ULTRA: /*not valid without transceiver*/ + default: + hsd->ErrorCode |= HAL_SD_ERROR_PARAM; + status = HAL_ERROR; + break; + } +#endif /* USE_SD_TRANSCEIVER */ + + /* Verify that SD card is ready to use after Speed mode switch*/ + tickstart = HAL_GetTick(); + while ((HAL_SD_GetCardState(hsd) != HAL_SD_CARD_TRANSFER)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + + /* Set Block Size for Card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE); + if (errorstate != HAL_SD_ERROR_NONE) + { + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS); + hsd->ErrorCode |= errorstate; + status = HAL_ERROR; + } + + /* Change State */ + hsd->State = HAL_SD_STATE_READY; + return status; +} + +/** + * @brief Gets the current sd card data state. + * @param hsd: pointer to SD handle + * @retval Card state + */ +HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd) +{ + uint32_t cardstate; + uint32_t errorstate; + uint32_t resp1 = 0; + + errorstate = SD_SendStatus(hsd, &resp1); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= errorstate; + } + + cardstate = ((resp1 >> 9U) & 0x0FU); + + return (HAL_SD_CardStateTypeDef)cardstate; +} + +/** + * @brief Abort the current transfer and disable the SD. + * @param hsd: pointer to a SD_HandleTypeDef structure that contains + * the configuration information for SD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd) +{ + uint32_t error_code; + uint32_t tickstart; + + if (hsd->State == HAL_SD_STATE_BUSY) + { + /* DIsable All interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + __SDMMC_CMDTRANS_DISABLE(hsd->Instance); + + /*we will send the CMD12 in all cases in order to stop the data transfers*/ + /*In case the data transfer just finished , the external memory will not respond and will return HAL_SD_ERROR_CMD_RSP_TIMEOUT*/ + /*In case the data transfer aborted , the external memory will respond and will return HAL_SD_ERROR_NONE*/ + /*Other scenario will return HAL_ERROR*/ + + hsd->ErrorCode = SDMMC_CmdStopTransfer(hsd->Instance); + error_code = hsd->ErrorCode; + if ((error_code != HAL_SD_ERROR_NONE) && (error_code != HAL_SD_ERROR_CMD_RSP_TIMEOUT)) + { + return HAL_ERROR; + } + + tickstart = HAL_GetTick(); + if ((hsd->Instance->DCTRL & SDMMC_DCTRL_DTDIR) == SDMMC_TRANSFER_DIR_TO_CARD) + { + if (hsd->ErrorCode == HAL_SD_ERROR_NONE) + { + while(!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DABORT | SDMMC_FLAG_BUSYD0END)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + } + + if (hsd->ErrorCode == HAL_SD_ERROR_CMD_RSP_TIMEOUT) + { + while(!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DATAEND)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + } + } + else if ((hsd->Instance->DCTRL & SDMMC_DCTRL_DTDIR) == SDMMC_TRANSFER_DIR_TO_SDMMC) + { + while(!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DABORT | SDMMC_FLAG_DATAEND)) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_TIMEOUT; + } + } + } + else + { + /* Nothing to do*/ + } + + /*The reason of all these while conditions previously is that we need to wait the SDMMC and clear + the appropriate flags that will be set depending of the abort/non abort of the memory */ + /*Not waiting the SDMMC flags will cause the next SDMMC_DISABLE_IDMA to not get cleared + and will result in next SDMMC read/write operation to fail */ + + /*SDMMC ready for clear data flags*/ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_BUSYD0END); + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + /* If IDMA Context, disable Internal DMA */ + hsd->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + hsd->State = HAL_SD_STATE_READY; + + /* Initialize the SD operation */ + hsd->Context = SD_CONTEXT_NONE; + } + return HAL_OK; +} + + +/** + * @brief Abort the current transfer and disable the SD (IT mode). + * @param hsd: pointer to a SD_HandleTypeDef structure that contains + * the configuration information for SD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardStateTypeDef CardState; + + /* Disable All interrupts */ + __HAL_SD_DISABLE_IT(hsd, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | \ + SDMMC_IT_TXUNDERR | SDMMC_IT_RXOVERR); + + /* If IDMA Context, disable Internal DMA */ + hsd->Instance->IDMACTRL = SDMMC_DISABLE_IDMA; + + /* Clear All flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + CardState = HAL_SD_GetCardState(hsd); + hsd->State = HAL_SD_STATE_READY; + + if ((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING)) + { + hsd->ErrorCode = SDMMC_CmdStopTransfer(hsd->Instance); + } + + if (hsd->ErrorCode != HAL_SD_ERROR_NONE) + { + return HAL_ERROR; + } + else + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->AbortCpltCallback(hsd); +#else + HAL_SD_AbortCallback(hsd); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup SD_Private_Functions + * @{ + */ + + +/** + * @brief Initializes the sd card. + * @param hsd: Pointer to SD handle + * @retval SD Card error state + */ +static uint32_t SD_InitCard(SD_HandleTypeDef *hsd) +{ + HAL_SD_CardCSDTypeDef CSD; + uint32_t errorstate; + uint16_t sd_rca = 0U; + uint32_t tickstart = HAL_GetTick(); + + /* Check the power State */ + if (SDMMC_GetPowerState(hsd->Instance) == 0U) + { + /* Power off */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD2 ALL_SEND_CID */ + errorstate = SDMMC_CmdSendCID(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card identification number data */ + hsd->CID[0U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1); + hsd->CID[1U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP2); + hsd->CID[2U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP3); + hsd->CID[3U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP4); + } + } + + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Send CMD3 SET_REL_ADDR with argument 0 */ + /* SD Card publishes its RCA. */ + while (sd_rca == 0U) + { + errorstate = SDMMC_CmdSetRelAdd(hsd->Instance, &sd_rca); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + if ((HAL_GetTick() - tickstart) >= SDMMC_CMDTIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + } + if (hsd->SdCard.CardType != CARD_SECURED) + { + /* Get the SD card RCA */ + hsd->SdCard.RelCardAdd = sd_rca; + + /* Send CMD9 SEND_CSD with argument as card's RCA */ + errorstate = SDMMC_CmdSendCSD(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + else + { + /* Get Card Specific Data */ + hsd->CSD[0U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1); + hsd->CSD[1U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP2); + hsd->CSD[2U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP3); + hsd->CSD[3U] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP4); + } + } + + /* Get the Card Class */ + hsd->SdCard.Class = (SDMMC_GetResponse(hsd->Instance, SDMMC_RESP2) >> 20U); + + /* Get CSD parameters */ + if (HAL_SD_GetCardCSD(hsd, &CSD) != HAL_OK) + { + return HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + /* Select the Card */ + errorstate = SDMMC_CmdSelDesel(hsd->Instance, (uint32_t)(((uint32_t)hsd->SdCard.RelCardAdd) << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* All cards are initialized */ + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Enquires cards about their operating voltage and configures clock + * controls and stores SD information that will be needed in future + * in the SD handle. + * @param hsd: Pointer to SD handle + * @retval error state + */ +static uint32_t SD_PowerON(SD_HandleTypeDef *hsd) +{ + __IO uint32_t count = 0U; + uint32_t response = 0U; + uint32_t validvoltage = 0U; + uint32_t errorstate; +#if (USE_SD_TRANSCEIVER != 0U) + uint32_t tickstart = HAL_GetTick(); +#endif /* USE_SD_TRANSCEIVER */ + + /* CMD0: GO_IDLE_STATE */ + errorstate = SDMMC_CmdGoIdleState(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* CMD8: SEND_IF_COND: Command available only on V2.0 cards */ + errorstate = SDMMC_CmdOperCond(hsd->Instance); + if (errorstate == SDMMC_ERROR_TIMEOUT) /* No response to CMD8 */ + { + hsd->SdCard.CardVersion = CARD_V1_X; + /* CMD0: GO_IDLE_STATE */ + errorstate = SDMMC_CmdGoIdleState(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + } + else + { + hsd->SdCard.CardVersion = CARD_V2_X; + } + + if (hsd->SdCard.CardVersion == CARD_V2_X) + { + /* SEND CMD55 APP_CMD with RCA as 0 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, 0); + if (errorstate != HAL_SD_ERROR_NONE) + { + return HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + } + /* SD CARD */ + /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */ + while ((count < SDMMC_MAX_VOLT_TRIAL) && (validvoltage == 0U)) + { + /* SEND CMD55 APP_CMD with RCA as 0 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, 0); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send CMD41 */ + errorstate = SDMMC_CmdAppOperCommand(hsd->Instance, SDMMC_VOLTAGE_WINDOW_SD | SDMMC_HIGH_CAPACITY | + SD_SWITCH_1_8V_CAPACITY); + if (errorstate != HAL_SD_ERROR_NONE) + { + return HAL_SD_ERROR_UNSUPPORTED_FEATURE; + } + + /* Get command response */ + response = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1); + + /* Get operating voltage*/ + validvoltage = (((response >> 31U) == 1U) ? 1U : 0U); + + count++; + } + + if (count >= SDMMC_MAX_VOLT_TRIAL) + { + return HAL_SD_ERROR_INVALID_VOLTRANGE; + } + + /* Set default card type */ + hsd->SdCard.CardType = CARD_SDSC; + + if ((response & SDMMC_HIGH_CAPACITY) == SDMMC_HIGH_CAPACITY) + { + hsd->SdCard.CardType = CARD_SDHC_SDXC; +#if (USE_SD_TRANSCEIVER != 0U) + if (hsd->Init.TranceiverPresent == SDMMC_TRANSCEIVER_PRESENT) + { + if ((response & SD_SWITCH_1_8V_CAPACITY) == SD_SWITCH_1_8V_CAPACITY) + { + hsd->SdCard.CardSpeed = CARD_ULTRA_HIGH_SPEED; + + /* Start switching procedue */ + hsd->Instance->POWER |= SDMMC_POWER_VSWITCHEN; + + /* Send CMD11 to switch 1.8V mode */ + errorstate = SDMMC_CmdVoltageSwitch(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Check to CKSTOP */ + while ((hsd->Instance->STA & SDMMC_FLAG_CKSTOP) != SDMMC_FLAG_CKSTOP) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + /* Clear CKSTOP Flag */ + hsd->Instance->ICR = SDMMC_FLAG_CKSTOP; + + /* Check to BusyD0 */ + if ((hsd->Instance->STA & SDMMC_FLAG_BUSYD0) != SDMMC_FLAG_BUSYD0) + { + /* Error when activate Voltage Switch in SDMMC Peripheral */ + return SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { + /* Enable Transceiver Switch PIN */ +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->DriveTransceiver_1_8V_Callback(SET); +#else + HAL_SD_DriveTransceiver_1_8V_Callback(SET); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ + + /* Switch ready */ + hsd->Instance->POWER |= SDMMC_POWER_VSWITCH; + + /* Check VSWEND Flag */ + while ((hsd->Instance->STA & SDMMC_FLAG_VSWEND) != SDMMC_FLAG_VSWEND) + { + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + /* Clear VSWEND Flag */ + hsd->Instance->ICR = SDMMC_FLAG_VSWEND; + + /* Check BusyD0 status */ + if ((hsd->Instance->STA & SDMMC_FLAG_BUSYD0) == SDMMC_FLAG_BUSYD0) + { + /* Error when enabling 1.8V mode */ + return HAL_SD_ERROR_INVALID_VOLTRANGE; + } + /* Switch to 1.8V OK */ + + /* Disable VSWITCH FLAG from SDMMC Peripheral */ + hsd->Instance->POWER = 0x13U; + + /* Clean Status flags */ + hsd->Instance->ICR = 0xFFFFFFFFU; + } + } + } +#endif /* USE_SD_TRANSCEIVER */ + } + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Turns the SDMMC output signals off. + * @param hsd: Pointer to SD handle + * @retval None + */ +static void SD_PowerOFF(SD_HandleTypeDef *hsd) +{ + /* Set Power State to OFF */ + (void)SDMMC_PowerState_OFF(hsd->Instance); +} + +/** + * @brief Send Status info command. + * @param hsd: pointer to SD handle + * @param pSDstatus: Pointer to the buffer that will contain the SD card status + * SD Status register) + * @retval error state + */ +static uint32_t SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t count; + uint32_t *pData = pSDstatus; + + /* Check SD response */ + if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Set block size for card if it is not equal to current block size for card */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Send CMD55 */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = 64U; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_ENABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + /* Send ACMD13 (SD_APP_STAUS) with argument as card's RCA */ + errorstate = SDMMC_CmdStatusRegister(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->ErrorCode |= HAL_SD_ERROR_NONE; + return errorstate; + } + + /* Get status data */ + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF)) + { + for (count = 0U; count < 8U; count++) + { + *pData = SDMMC_ReadFIFO(hsd->Instance); + pData++; + } + } + + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + return HAL_SD_ERROR_DATA_TIMEOUT; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + return HAL_SD_ERROR_DATA_CRC_FAIL; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + return HAL_SD_ERROR_RX_OVERRUN; + } + else + { + /* Nothing to do */ + } + + while ((__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DPSMACT))) + { + *pData = SDMMC_ReadFIFO(hsd->Instance); + pData++; + + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + /* Clear all the static status flags*/ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Returns the current card's status. + * @param hsd: Pointer to SD handle + * @param pCardStatus: pointer to the buffer that will contain the SD card + * status (Card Status register) + * @retval error state + */ +static uint32_t SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus) +{ + uint32_t errorstate; + + if (pCardStatus == NULL) + { + return HAL_SD_ERROR_PARAM; + } + + /* Send Status command */ + errorstate = SDMMC_CmdSendStatus(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Get SD card status */ + *pCardStatus = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1); + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Enables the SDMMC wide bus mode. + * @param hsd: pointer to SD handle + * @retval error state + */ +static uint32_t SD_WideBus_Enable(SD_HandleTypeDef *hsd) +{ + uint32_t scr[2U] = {0UL, 0UL}; + uint32_t errorstate; + + if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, scr); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* If requested card supports wide bus operation */ + if ((scr[1U] & SDMMC_WIDE_BUS_SUPPORT) != SDMMC_ALLZERO) + { + /* Send CMD55 APP_CMD with argument as card's RCA.*/ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ + errorstate = SDMMC_CmdBusWidth(hsd->Instance, 2U); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + return HAL_SD_ERROR_NONE; + } + else + { + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } +} + +/** + * @brief Disables the SDMMC wide bus mode. + * @param hsd: Pointer to SD handle + * @retval error state + */ +static uint32_t SD_WideBus_Disable(SD_HandleTypeDef *hsd) +{ + uint32_t scr[2U] = {0UL, 0UL}; + uint32_t errorstate; + + if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED) + { + return HAL_SD_ERROR_LOCK_UNLOCK_FAILED; + } + + /* Get SCR Register */ + errorstate = SD_FindSCR(hsd, scr); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* If requested card supports 1 bit mode operation */ + if ((scr[1U] & SDMMC_SINGLE_BUS_SUPPORT) != SDMMC_ALLZERO) + { + /* Send CMD55 APP_CMD with argument as card's RCA */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */ + errorstate = SDMMC_CmdBusWidth(hsd->Instance, 0U); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + return HAL_SD_ERROR_NONE; + } + else + { + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } +} + + +/** + * @brief Finds the SD card SCR register value. + * @param hsd: Pointer to SD handle + * @param pSCR: pointer to the buffer that will contain the SCR value + * @retval error state + */ +static uint32_t SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t tickstart = HAL_GetTick(); + uint32_t index = 0U; + uint32_t tempscr[2U] = {0UL, 0UL}; + uint32_t *scr = pSCR; + + /* Set Block Size To 8 Bytes */ + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 8U); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Send CMD55 APP_CMD with argument as card's RCA */ + errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)((hsd->SdCard.RelCardAdd) << 16U)); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = 8U; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_8B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_ENABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */ + errorstate = SDMMC_CmdSendSCR(hsd->Instance); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND | + SDMMC_FLAG_DATAEND)) + { + if ((!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOE)) && (index == 0U)) + { + tempscr[0] = SDMMC_ReadFIFO(hsd->Instance); + tempscr[1] = SDMMC_ReadFIFO(hsd->Instance); + index++; + } + + + if ((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT) + { + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT); + + return HAL_SD_ERROR_DATA_TIMEOUT; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL); + + return HAL_SD_ERROR_DATA_CRC_FAIL; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR); + + return HAL_SD_ERROR_RX_OVERRUN; + } + else + { + /* No error flag set */ + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + *scr = (((tempscr[1] & SDMMC_0TO7BITS) << 24) | ((tempscr[1] & SDMMC_8TO15BITS) << 8) | \ + ((tempscr[1] & SDMMC_16TO23BITS) >> 8) | ((tempscr[1] & SDMMC_24TO31BITS) >> 24)); + scr++; + *scr = (((tempscr[0] & SDMMC_0TO7BITS) << 24) | ((tempscr[0] & SDMMC_8TO15BITS) << 8) | \ + ((tempscr[0] & SDMMC_16TO23BITS) >> 8) | ((tempscr[0] & SDMMC_24TO31BITS) >> 24)); + + } + + return HAL_SD_ERROR_NONE; +} + +/** + * @brief Wrap up reading in non-blocking mode. + * @param hsd: pointer to a SD_HandleTypeDef structure that contains + * the configuration information. + * @retval None + */ +static void SD_Read_IT(SD_HandleTypeDef *hsd) +{ + uint32_t count; + uint32_t data; + uint8_t *tmp; + + tmp = hsd->pRxBuffPtr; + + if (hsd->RxXferSize >= 32U) + { + /* Read data from SDMMC Rx FIFO */ + for (count = 0U; count < 8U; count++) + { + data = SDMMC_ReadFIFO(hsd->Instance); + *tmp = (uint8_t)(data & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 8U) & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 16U) & 0xFFU); + tmp++; + *tmp = (uint8_t)((data >> 24U) & 0xFFU); + tmp++; + } + + hsd->pRxBuffPtr = tmp; + hsd->RxXferSize -= 32U; + } +} + +/** + * @brief Wrap up writing in non-blocking mode. + * @param hsd: pointer to a SD_HandleTypeDef structure that contains + * the configuration information. + * @retval None + */ +static void SD_Write_IT(SD_HandleTypeDef *hsd) +{ + uint32_t count; + uint32_t data; + const uint8_t *tmp; + + tmp = hsd->pTxBuffPtr; + + if (hsd->TxXferSize >= 32U) + { + /* Write data to SDMMC Tx FIFO */ + for (count = 0U; count < 8U; count++) + { + data = (uint32_t)(*tmp); + tmp++; + data |= ((uint32_t)(*tmp) << 8U); + tmp++; + data |= ((uint32_t)(*tmp) << 16U); + tmp++; + data |= ((uint32_t)(*tmp) << 24U); + tmp++; + (void)SDMMC_WriteFIFO(hsd->Instance, &data); + } + + hsd->pTxBuffPtr = tmp; + hsd->TxXferSize -= 32U; + } +} + +/** + * @brief Switches the SD card to High Speed mode. + * This API must be used after "Transfer State" + * @note This operation should be followed by the configuration + * of PLL to have SDMMCCK clock between 25 and 50 MHz + * @param hsd: SD handle + * @param SwitchSpeedMode: SD speed mode( SDMMC_SDR12_SWITCH_PATTERN, SDMMC_SDR25_SWITCH_PATTERN) + * @retval SD Card error state + */ +uint32_t SD_SwitchSpeed(SD_HandleTypeDef *hsd, uint32_t SwitchSpeedMode) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + SDMMC_DataInitTypeDef sdmmc_datainitstructure; + uint32_t SD_hs[16] = {0}; + uint32_t count; + uint32_t loop = 0 ; + uint32_t Timeout = HAL_GetTick(); + + if (hsd->SdCard.CardSpeed == CARD_NORMAL_SPEED) + { + /* Standard Speed Card <= 12.5Mhz */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if (hsd->SdCard.CardSpeed >= CARD_HIGH_SPEED) + { + /* Initialize the Data control register */ + hsd->Instance->DCTRL = 0; + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdmmc_datainitstructure.DataTimeOut = SDMMC_DATATIMEOUT; + sdmmc_datainitstructure.DataLength = 64U; + sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B ; + sdmmc_datainitstructure.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + sdmmc_datainitstructure.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + sdmmc_datainitstructure.DPSM = SDMMC_DPSM_ENABLE; + + (void)SDMMC_ConfigData(hsd->Instance, &sdmmc_datainitstructure); + + + errorstate = SDMMC_CmdSwitch(hsd->Instance, SwitchSpeedMode); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF)) + { + for (count = 0U; count < 8U; count++) + { + SD_hs[(8U * loop) + count] = SDMMC_ReadFIFO(hsd->Instance); + } + loop ++; + } + + if ((HAL_GetTick() - Timeout) >= SDMMC_DATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT); + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL); + + errorstate = SDMMC_ERROR_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR); + + errorstate = SDMMC_ERROR_RX_OVERRUN; + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + /* Test if the switch mode HS is ok */ + if ((((uint8_t *)SD_hs)[13] & 2U) != 2U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + + } + + return errorstate; +} + +#if (USE_SD_TRANSCEIVER != 0U) +/** + * @brief Switches the SD card to Ultra High Speed mode. + * This API must be used after "Transfer State" + * @note This operation should be followed by the configuration + * of PLL to have SDMMCCK clock between 50 and 120 MHz + * @param hsd: SD handle + * @param UltraHighSpeedMode: SD speed mode( SDMMC_SDR50_SWITCH_PATTERN, SDMMC_SDR104_SWITCH_PATTERN) + * @retval SD Card error state + */ +static uint32_t SD_UltraHighSpeed(SD_HandleTypeDef *hsd, uint32_t UltraHighSpeedMode) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + SDMMC_DataInitTypeDef sdmmc_datainitstructure; + uint32_t SD_hs[16] = {0}; + uint32_t count; + uint32_t loop = 0 ; + uint32_t Timeout = HAL_GetTick(); + + if (hsd->SdCard.CardSpeed == CARD_NORMAL_SPEED) + { + /* Standard Speed Card <= 12.5Mhz */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if (hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) + { + /* Initialize the Data control register */ + hsd->Instance->DCTRL = 0; + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdmmc_datainitstructure.DataTimeOut = SDMMC_DATATIMEOUT; + sdmmc_datainitstructure.DataLength = 64U; + sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B ; + sdmmc_datainitstructure.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + sdmmc_datainitstructure.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + sdmmc_datainitstructure.DPSM = SDMMC_DPSM_ENABLE; + + if (SDMMC_ConfigData(hsd->Instance, &sdmmc_datainitstructure) != HAL_OK) + { + return (HAL_SD_ERROR_GENERAL_UNKNOWN_ERR); + } + + errorstate = SDMMC_CmdSwitch(hsd->Instance, UltraHighSpeedMode); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF)) + { + for (count = 0U; count < 8U; count++) + { + SD_hs[(8U * loop) + count] = SDMMC_ReadFIFO(hsd->Instance); + } + loop ++; + } + + if ((HAL_GetTick() - Timeout) >= SDMMC_DATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT); + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL); + + errorstate = SDMMC_ERROR_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR); + + errorstate = SDMMC_ERROR_RX_OVERRUN; + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + /* Test if the switch mode HS is ok */ + if ((((uint8_t *)SD_hs)[13] & 2U) != 2U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->DriveTransceiver_1_8V_Callback(SET); +#else + HAL_SD_DriveTransceiver_1_8V_Callback(SET); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) + /* Enable DelayBlock Peripheral */ + /* SDMMC_FB_CLK tuned feedback clock selected as receive clock, for SDR104 */ + MODIFY_REG(hsd->Instance->CLKCR, SDMMC_CLKCR_SELCLKRX, SDMMC_CLKCR_SELCLKRX_1); + if (DelayBlock_Enable(SD_GET_DLYB_INSTANCE(hsd->Instance)) != HAL_OK) + { + return (HAL_SD_ERROR_GENERAL_UNKNOWN_ERR); + } +#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */ + } + } + + return errorstate; +} + +/** + * @brief Switches the SD card to Double Data Rate (DDR) mode. + * This API must be used after "Transfer State" + * @note This operation should be followed by the configuration + * of PLL to have SDMMCCK clock less than 50MHz + * @param hsd: SD handle + * @retval SD Card error state + */ +static uint32_t SD_DDR_Mode(SD_HandleTypeDef *hsd) +{ + uint32_t errorstate = HAL_SD_ERROR_NONE; + SDMMC_DataInitTypeDef sdmmc_datainitstructure; + uint32_t SD_hs[16] = {0}; + uint32_t count; + uint32_t loop = 0 ; + uint32_t Timeout = HAL_GetTick(); + + if (hsd->SdCard.CardSpeed == CARD_NORMAL_SPEED) + { + /* Standard Speed Card <= 12.5Mhz */ + return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE; + } + + if (hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED) + { + /* Initialize the Data control register */ + hsd->Instance->DCTRL = 0; + errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U); + + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + sdmmc_datainitstructure.DataTimeOut = SDMMC_DATATIMEOUT; + sdmmc_datainitstructure.DataLength = 64U; + sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B ; + sdmmc_datainitstructure.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + sdmmc_datainitstructure.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + sdmmc_datainitstructure.DPSM = SDMMC_DPSM_ENABLE; + + if (SDMMC_ConfigData(hsd->Instance, &sdmmc_datainitstructure) != HAL_OK) + { + return (HAL_SD_ERROR_GENERAL_UNKNOWN_ERR); + } + + errorstate = SDMMC_CmdSwitch(hsd->Instance, SDMMC_DDR50_SWITCH_PATTERN); + if (errorstate != HAL_SD_ERROR_NONE) + { + return errorstate; + } + + while (!__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND | + SDMMC_FLAG_DATAEND)) + { + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF)) + { + for (count = 0U; count < 8U; count++) + { + SD_hs[(8U * loop) + count] = SDMMC_ReadFIFO(hsd->Instance); + } + loop ++; + } + + if ((HAL_GetTick() - Timeout) >= SDMMC_DATATIMEOUT) + { + hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT; + hsd->State = HAL_SD_STATE_READY; + return HAL_SD_ERROR_TIMEOUT; + } + } + + if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT); + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL); + + errorstate = SDMMC_ERROR_DATA_CRC_FAIL; + + return errorstate; + } + else if (__HAL_SD_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR)) + { + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR); + + errorstate = SDMMC_ERROR_RX_OVERRUN; + + return errorstate; + } + else + { + /* No error flag set */ + } + + /* Clear all the static flags */ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + /* Test if the switch mode is ok */ + if ((((uint8_t *)SD_hs)[13] & 2U) != 2U) + { + errorstate = SDMMC_ERROR_UNSUPPORTED_FEATURE; + } + else + { +#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) + hsd->DriveTransceiver_1_8V_Callback(SET); +#else + HAL_SD_DriveTransceiver_1_8V_Callback(SET); +#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ +#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) + /* Enable DelayBlock Peripheral */ + /* SDMMC_CKin feedback clock selected as receive clock, for DDR50 */ + MODIFY_REG(hsd->Instance->CLKCR, SDMMC_CLKCR_SELCLKRX, SDMMC_CLKCR_SELCLKRX_0); + if (DelayBlock_Enable(SD_GET_DLYB_INSTANCE(hsd->Instance)) != HAL_OK) + { + return (HAL_SD_ERROR_GENERAL_UNKNOWN_ERR); + } +#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */ + } + } + + return errorstate; +} + +#endif /* USE_SD_TRANSCEIVER */ + +/** + * @brief Read DMA Buffer 0 Transfer completed callbacks + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SDEx_Read_DMADoubleBuf0CpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SDEx_Read_DMADoubleBuf0CpltCallback can be implemented in the user file + */ +} + +/** + * @brief Read DMA Buffer 1 Transfer completed callbacks + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SDEx_Read_DMADoubleBuf1CpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SDEx_Read_DMADoubleBuf1CpltCallback can be implemented in the user file + */ +} + +/** + * @brief Write DMA Buffer 0 Transfer completed callbacks + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SDEx_Write_DMADoubleBuf0CpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SDEx_Write_DMADoubleBuf0CpltCallback can be implemented in the user file + */ +} + +/** + * @brief Write DMA Buffer 1 Transfer completed callbacks + * @param hsd: SD handle + * @retval None + */ +__weak void HAL_SDEx_Write_DMADoubleBuf1CpltCallback(SD_HandleTypeDef *hsd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsd); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SDEx_Write_DMADoubleBuf1CpltCallback can be implemented in the user file + */ +} + + +/** + * @} + */ + +#endif /* HAL_SD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd_ex.c new file mode 100644 index 0000000..1cc19e3 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sd_ex.c @@ -0,0 +1,313 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sd_ex.c + * @author MCD Application Team + * @brief SD card Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Secure Digital (SD) peripheral: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SD Extension HAL driver can be used as follows: + (+) Configure Buffer0 and Buffer1 start address and Buffer size using HAL_SDEx_ConfigDMAMultiBuffer() function. + (+) Start Read and Write for multibuffer mode using HAL_SDEx_ReadBlocksDMAMultiBuffer() + and HAL_SDEx_WriteBlocksDMAMultiBuffer() functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup SDEx SDEx + * @brief SD Extended HAL module driver + * @{ + */ + +#ifdef HAL_SD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SDEx_Exported_Functions + * @{ + */ + +/** @addtogroup SDEx_Exported_Functions_Group1 + * @brief Multibuffer functions + * +@verbatim + ============================================================================== + ##### Multibuffer functions ##### + ============================================================================== + [..] + This section provides functions allowing to configure the multibuffer mode and start read and write + multibuffer mode for SD HAL driver. + +@endverbatim + * @{ + */ + +/** + * @brief Configure DMA Dual Buffer mode. The Data transfer is managed by an Internal DMA. + * @param hsd: SD handle + * @param pDataBuffer0: Pointer to the buffer0 that will contain/receive the transferred data + * @param pDataBuffer1: Pointer to the buffer1 that will contain/receive the transferred data + * @param BufferSize: Size of Buffer0 in Blocks. Buffer0 and Buffer1 must have the same size. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_ConfigDMAMultiBuffer(SD_HandleTypeDef *hsd, uint32_t *pDataBuffer0, uint32_t *pDataBuffer1, + uint32_t BufferSize) +{ + if (hsd->State == HAL_SD_STATE_READY) + { + hsd->Instance->IDMABASE0 = (uint32_t) pDataBuffer0; + hsd->Instance->IDMABASE1 = (uint32_t) pDataBuffer1; + hsd->Instance->IDMABSIZE = (uint32_t)(BLOCKSIZE * BufferSize); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads block(s) from a specified address in a card. The received Data will be stored in Buffer0 and Buffer1. + * Buffer0, Buffer1 and BufferSize need to be configured by function HAL_SDEx_ConfigDMAMultiBuffer before + * call this function. + * @param hsd: SD handle + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Total number of blocks to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_ReadBlocksDMAMultiBuffer(SD_HandleTypeDef *hsd, uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t DmaBase0_reg; + uint32_t DmaBase1_reg; + uint32_t add = BlockAdd; + + if (hsd->State == HAL_SD_STATE_READY) + { + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + DmaBase0_reg = hsd->Instance->IDMABASE0; + DmaBase1_reg = hsd->Instance->IDMABASE1; + + if ((hsd->Instance->IDMABSIZE == 0U) || (DmaBase0_reg == 0U) || (DmaBase1_reg == 0U)) + { + hsd->ErrorCode = HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0; + /* Clear old Flags*/ + __HAL_SD_CLEAR_FLAG(hsd, SDMMC_STATIC_DATA_FLAGS); + + hsd->ErrorCode = HAL_SD_ERROR_NONE; + hsd->State = HAL_SD_STATE_BUSY; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_SDMMC; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + hsd->Instance->DCTRL |= SDMMC_DCTRL_FIFORST; + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + hsd->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_DOUBLE_BUFF0; + + /* Read Blocks in DMA mode */ + hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Read Multi Block command */ + errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | + SDMMC_IT_IDMABTC)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + +} + +/** + * @brief Write block(s) to a specified address in a card. The transferred Data are stored in Buffer0 and Buffer1. + * Buffer0, Buffer1 and BufferSize need to be configured by function HAL_SDEx_ConfigDMAMultiBuffer before + * call this function. + * @param hsd: SD handle + * @param BlockAdd: Block Address from where data is to be read + * @param NumberOfBlocks: Total number of blocks to read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_WriteBlocksDMAMultiBuffer(SD_HandleTypeDef *hsd, uint32_t BlockAdd, uint32_t NumberOfBlocks) +{ + SDMMC_DataInitTypeDef config; + uint32_t errorstate; + uint32_t DmaBase0_reg; + uint32_t DmaBase1_reg; + uint32_t add = BlockAdd; + + if (hsd->State == HAL_SD_STATE_READY) + { + if ((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr)) + { + hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + DmaBase0_reg = hsd->Instance->IDMABASE0; + DmaBase1_reg = hsd->Instance->IDMABASE1; + if ((hsd->Instance->IDMABSIZE == 0U) || (DmaBase0_reg == 0U) || (DmaBase1_reg == 0U)) + { + hsd->ErrorCode = HAL_SD_ERROR_ADDR_OUT_OF_RANGE; + return HAL_ERROR; + } + + /* Initialize data control register */ + hsd->Instance->DCTRL = 0; + + hsd->ErrorCode = HAL_SD_ERROR_NONE; + + hsd->State = HAL_SD_STATE_BUSY; + + if (hsd->SdCard.CardType != CARD_SDHC_SDXC) + { + add *= 512U; + } + + /* Configure the SD DPSM (Data Path State Machine) */ + config.DataTimeOut = SDMMC_DATATIMEOUT; + config.DataLength = BLOCKSIZE * NumberOfBlocks; + config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B; + config.TransferDir = SDMMC_TRANSFER_DIR_TO_CARD; + config.TransferMode = SDMMC_TRANSFER_MODE_BLOCK; + config.DPSM = SDMMC_DPSM_DISABLE; + (void)SDMMC_ConfigData(hsd->Instance, &config); + + __SDMMC_CMDTRANS_ENABLE(hsd->Instance); + + hsd->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_DOUBLE_BUFF0; + + /* Write Blocks in DMA mode */ + hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK | SD_CONTEXT_DMA); + + /* Write Multi Block command */ + errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add); + if (errorstate != HAL_SD_ERROR_NONE) + { + hsd->State = HAL_SD_STATE_READY; + hsd->ErrorCode |= errorstate; + return HAL_ERROR; + } + + __HAL_SD_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | + SDMMC_IT_IDMABTC)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Change the DMA Buffer0 or Buffer1 address on the fly. + * @param hsd: pointer to a SD_HandleTypeDef structure. + * @param Buffer: the buffer to be changed, This parameter can be one of + * the following values: SD_DMA_BUFFER0 or SD_DMA_BUFFER1 + * @param pDataBuffer: The new address + * @note The BUFFER0 address can be changed only when the current transfer use + * BUFFER1 and the BUFFER1 address can be changed only when the current + * transfer use BUFFER0. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDEx_ChangeDMABuffer(SD_HandleTypeDef *hsd, HAL_SDEx_DMABuffer_MemoryTypeDef Buffer, + uint32_t *pDataBuffer) +{ + if (Buffer == SD_DMA_BUFFER0) + { + /* change the buffer0 address */ + hsd->Instance->IDMABASE0 = (uint32_t)pDataBuffer; + } + else + { + /* change the memory1 address */ + hsd->Instance->IDMABASE1 = (uint32_t)pDataBuffer; + } + + return HAL_OK; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sdram.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sdram.c new file mode 100644 index 0000000..8859a08 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sdram.c @@ -0,0 +1,1311 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sdram.c + * @author MCD Application Team + * @brief SDRAM HAL module driver. + * This file provides a generic firmware to drive SDRAM memories mounted + * as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control SDRAM memories. It uses the FMC layer functions to interface + with SDRAM devices. + The following sequence should be followed to configure the FMC to interface + with SDRAM memories: + + (#) Declare a SDRAM_HandleTypeDef handle structure, for example: + SDRAM_HandleTypeDef hsdram + + (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed + values of the structure member. + + (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined + base register instance for NOR or SDRAM device + + (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example: + FMC_SDRAM_TimingTypeDef Timing; + and fill its fields with the allowed values of the structure member. + + (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function + performs the following sequence: + + (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit() + (##) Control register configuration using the FMC SDRAM interface function + FMC_SDRAM_Init() + (##) Timing register configuration using the FMC SDRAM interface function + FMC_SDRAM_Timing_Init() + (##) Program the SDRAM external device by applying its initialization sequence + according to the device plugged in your hardware. This step is mandatory + for accessing the SDRAM device. + + (#) At this stage you can perform read/write accesses from/to the memory connected + to the SDRAM Bank. You can perform either polling or DMA transfer using the + following APIs: + (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access + (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer + + (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/ + HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or + the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM + device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef + structure. + + (#) You can continuously monitor the SDRAM device HAL state by calling the function + HAL_SDRAM_GetState() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SDRAM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_SDRAM_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : SDRAM MspInit. + (+) MspDeInitCallback : SDRAM MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_SDRAM_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : SDRAM MspInit. + (+) MspDeInitCallback : SDRAM MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_SDRAM_Init and if the state is HAL_SDRAM_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_SDRAM_Init + and HAL_SDRAM_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SDRAM_Init and HAL_SDRAM_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SDRAM_RegisterCallback before calling HAL_SDRAM_DeInit + or HAL_SDRAM_Init function. + + When The compilation define USE_HAL_SDRAM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + +/** @defgroup SDRAM SDRAM + * @brief SDRAM driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SDRAM_Private_Functions SDRAM Private Functions + * @{ + */ +static void SDRAM_DMACplt(MDMA_HandleTypeDef *hmdma); +static void SDRAM_DMACpltProt(MDMA_HandleTypeDef *hmdma); +static void SDRAM_DMAError(MDMA_HandleTypeDef *hmdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions + * @{ + */ + +/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### SDRAM Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to initialize/de-initialize + the SDRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Performs the SDRAM device initialization sequence. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param Timing Pointer to SDRAM control timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing) +{ + /* Check the SDRAM handle parameter */ + if (hsdram == NULL) + { + return HAL_ERROR; + } + + if (hsdram->State == HAL_SDRAM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsdram->Lock = HAL_UNLOCKED; +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + if (hsdram->MspInitCallback == NULL) + { + hsdram->MspInitCallback = HAL_SDRAM_MspInit; + } + hsdram->RefreshErrorCallback = HAL_SDRAM_RefreshErrorCallback; + hsdram->DmaXferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback; + hsdram->DmaXferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback; + + /* Init the low level hardware */ + hsdram->MspInitCallback(hsdram); +#else + /* Initialize the low level hardware (MSP) */ + HAL_SDRAM_MspInit(hsdram); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + } + + /* Initialize the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Initialize SDRAM control Interface */ + (void)FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init)); + + /* Initialize SDRAM timing Interface */ + (void)FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank); + + /* Enable FMC Peripheral */ + __FMC_ENABLE(); + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Perform the SDRAM device initialization sequence. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram) +{ +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + if (hsdram->MspDeInitCallback == NULL) + { + hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; + } + + /* DeInit the low level hardware */ + hsdram->MspDeInitCallback(hsdram); +#else + /* Initialize the low level hardware (MSP) */ + HAL_SDRAM_MspDeInit(hsdram); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + + /* Configure the SDRAM registers with their reset values */ + (void)FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank); + + /* Reset the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsdram); + + return HAL_OK; +} + +/** + * @brief SDRAM MSP Init. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval None + */ +__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsdram); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_MspInit could be implemented in the user file + */ +} + +/** + * @brief SDRAM MSP DeInit. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval None + */ +__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsdram); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function handles SDRAM refresh error interrupt request. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL status + */ +void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram) +{ + /* Check SDRAM interrupt Rising edge flag */ + if (__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT)) + { + /* SDRAM refresh error interrupt callback */ +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + hsdram->RefreshErrorCallback(hsdram); +#else + HAL_SDRAM_RefreshErrorCallback(hsdram); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + + /* Clear SDRAM refresh error interrupt pending bit */ + __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR); + } +} + +/** + * @brief SDRAM Refresh error callback. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval None + */ +__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsdram); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete callback. + * @param hmdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +__weak void HAL_SDRAM_DMA_XferCpltCallback(MDMA_HandleTypeDef *hmdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdma); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete error callback. + * @param hmdma DMA handle + * @retval None + */ +__weak void HAL_SDRAM_DMA_XferErrorCallback(MDMA_HandleTypeDef *hmdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdma); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### SDRAM Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the SDRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Reads 8-bit data buffer from the SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *pSdramAddress = (uint8_t *)pAddress; + uint8_t *pdestbuff = pDstBuffer; + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Read data from source */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *(__IO uint8_t *)pSdramAddress; + pdestbuff++; + pSdramAddress++; + } + + /* Update the SDRAM controller state */ + hsdram->State = state; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 8-bit data buffer to SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *pSdramAddress = (uint8_t *)pAddress; + uint8_t *psrcbuff = pSrcBuffer; + + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *(__IO uint8_t *)pSdramAddress = *psrcbuff; + psrcbuff++; + pSdramAddress++; + } + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 16-bit data buffer from the SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *pSdramAddress = pAddress; + uint16_t *pdestbuff = pDstBuffer; + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Read data from memory */ + for (size = BufferSize; size >= 2U ; size -= 2U) + { + *pdestbuff = (uint16_t)((*pSdramAddress) & 0x0000FFFFU); + pdestbuff++; + *pdestbuff = (uint16_t)(((*pSdramAddress) & 0xFFFF0000U) >> 16U); + pdestbuff++; + pSdramAddress++; + } + + /* Read last 16-bits if size is not 32-bits multiple */ + if ((BufferSize % 2U) != 0U) + { + *pdestbuff = (uint16_t)((*pSdramAddress) & 0x0000FFFFU); + } + + /* Update the SDRAM controller state */ + hsdram->State = state; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 16-bit data buffer to SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psdramaddress = pAddress; + uint16_t *psrcbuff = pSrcBuffer; + + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size >= 2U ; size -= 2U) + { + *psdramaddress = (uint32_t)(*psrcbuff); + psrcbuff++; + *psdramaddress |= ((uint32_t)(*psrcbuff) << 16U); + psrcbuff++; + psdramaddress++; + } + + /* Write last 16-bits if size is not 32-bits multiple */ + if ((BufferSize % 2U) != 0U) + { + *psdramaddress = ((uint32_t)(*psrcbuff) & 0x0000FFFFU) | ((*psdramaddress) & 0xFFFF0000U); + } + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 32-bit data buffer from the SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *pSdramAddress = (uint32_t *)pAddress; + uint32_t *pdestbuff = pDstBuffer; + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Read data from source */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *(__IO uint32_t *)pSdramAddress; + pdestbuff++; + pSdramAddress++; + } + + /* Update the SDRAM controller state */ + hsdram->State = state; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 32-bit data buffer to SDRAM memory. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *pSdramAddress = pAddress; + uint32_t *psrcbuff = pSrcBuffer; + + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *pSdramAddress = *psrcbuff; + psrcbuff++; + pSdramAddress++; + } + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads a Words data from the SDRAM memory using DMA transfer. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + status = HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + if (state == HAL_SDRAM_STATE_READY) + { + hsdram->hmdma->XferCpltCallback = SDRAM_DMACplt; + } + else + { + hsdram->hmdma->XferCpltCallback = SDRAM_DMACpltProt; + } + hsdram->hmdma->XferErrorCallback = SDRAM_DMAError; + + /* Enable the DMA Stream */ + status = HAL_MDMA_Start_IT(hsdram->hmdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)(BufferSize * 4U), 1); + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Writes a Words data buffer to SDRAM memory using DMA transfer. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + status = HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsdram); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsdram->hmdma->XferCpltCallback = SDRAM_DMACplt; + hsdram->hmdma->XferErrorCallback = SDRAM_DMAError; + + /* Enable the DMA Stream */ + status = HAL_MDMA_Start_IT(hsdram->hmdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)(BufferSize * 4U), 1); + + /* Process Unlocked */ + __HAL_UNLOCK(hsdram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SDRAM Callback + * To be used to override the weak predefined callback + * @param hsdram : SDRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SDRAM_MSP_INIT_CB_ID SDRAM MspInit callback ID + * @arg @ref HAL_SDRAM_MSP_DEINIT_CB_ID SDRAM MspDeInit callback ID + * @arg @ref HAL_SDRAM_REFRESH_ERR_CB_ID SDRAM Refresh Error callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, + pSDRAM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SDRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + state = hsdram->State; + if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SDRAM_MSP_INIT_CB_ID : + hsdram->MspInitCallback = pCallback; + break; + case HAL_SDRAM_MSP_DEINIT_CB_ID : + hsdram->MspDeInitCallback = pCallback; + break; + case HAL_SDRAM_REFRESH_ERR_CB_ID : + hsdram->RefreshErrorCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsdram->State == HAL_SDRAM_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SDRAM_MSP_INIT_CB_ID : + hsdram->MspInitCallback = pCallback; + break; + case HAL_SDRAM_MSP_DEINIT_CB_ID : + hsdram->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User SDRAM Callback + * SDRAM Callback is redirected to the weak predefined callback + * @param hsdram : SDRAM handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SDRAM_MSP_INIT_CB_ID SDRAM MspInit callback ID + * @arg @ref HAL_SDRAM_MSP_DEINIT_CB_ID SDRAM MspDeInit callback ID + * @arg @ref HAL_SDRAM_REFRESH_ERR_CB_ID SDRAM Refresh Error callback ID + * @arg @ref HAL_SDRAM_DMA_XFER_CPLT_CB_ID SDRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SDRAM_DMA_XFER_ERR_CB_ID SDRAM DMA Xfer Error callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SDRAM_StateTypeDef state; + + state = hsdram->State; + if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SDRAM_MSP_INIT_CB_ID : + hsdram->MspInitCallback = HAL_SDRAM_MspInit; + break; + case HAL_SDRAM_MSP_DEINIT_CB_ID : + hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; + break; + case HAL_SDRAM_REFRESH_ERR_CB_ID : + hsdram->RefreshErrorCallback = HAL_SDRAM_RefreshErrorCallback; + break; + case HAL_SDRAM_DMA_XFER_CPLT_CB_ID : + hsdram->DmaXferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback; + break; + case HAL_SDRAM_DMA_XFER_ERR_CB_ID : + hsdram->DmaXferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hsdram->State == HAL_SDRAM_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SDRAM_MSP_INIT_CB_ID : + hsdram->MspInitCallback = HAL_SDRAM_MspInit; + break; + case HAL_SDRAM_MSP_DEINIT_CB_ID : + hsdram->MspDeInitCallback = HAL_SDRAM_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User SDRAM Callback for DMA transfers + * To be used to override the weak predefined callback + * @param hsdram : SDRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SDRAM_DMA_XFER_CPLT_CB_ID SDRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SDRAM_DMA_XFER_ERR_CB_ID SDRAM DMA Xfer Error callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, + pSDRAM_DmaCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SDRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsdram); + + state = hsdram->State; + if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_WRITE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SDRAM_DMA_XFER_CPLT_CB_ID : + hsdram->DmaXferCpltCallback = pCallback; + break; + case HAL_SDRAM_DMA_XFER_ERR_CB_ID : + hsdram->DmaXferErrorCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsdram); + return status; +} +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SDRAM_Exported_Functions_Group3 Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### SDRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the SDRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically SDRAM write protection. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram) +{ + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Enable write protection */ + (void)FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank); + + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically SDRAM write protection. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram) +{ + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (state == HAL_SDRAM_STATE_WRITE_PROTECTED) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Disable write protection */ + (void)FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank); + + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Sends Command to the SDRAM bank. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param Command SDRAM command structure + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, + uint32_t Timeout) +{ + HAL_SDRAM_StateTypeDef state = hsdram->State; + + /* Check the SDRAM controller state */ + if (state == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if ((state == HAL_SDRAM_STATE_READY) || (state == HAL_SDRAM_STATE_PRECHARGED)) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Send SDRAM command */ + (void)FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout); + + /* Update the SDRAM controller state state */ + if (Command->CommandMode == FMC_SDRAM_CMD_PALL) + { + hsdram->State = HAL_SDRAM_STATE_PRECHARGED; + } + else + { + hsdram->State = HAL_SDRAM_STATE_READY; + } + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Programs the SDRAM Memory Refresh rate. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param RefreshRate The SDRAM refresh rate value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate) +{ + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Program the refresh rate */ + (void)FMC_SDRAM_ProgramRefreshRate(hsdram->Instance, RefreshRate); + + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Sets the Number of consecutive SDRAM Memory auto Refresh commands. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @param AutoRefreshNumber The SDRAM auto Refresh number + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber) +{ + /* Check the SDRAM controller state */ + if (hsdram->State == HAL_SDRAM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (hsdram->State == HAL_SDRAM_STATE_READY) + { + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_BUSY; + + /* Set the Auto-Refresh number */ + (void)FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance, AutoRefreshNumber); + + /* Update the SDRAM state */ + hsdram->State = HAL_SDRAM_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Returns the SDRAM memory current mode. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval The SDRAM memory mode. + */ +uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram) +{ + /* Return the SDRAM memory current mode */ + return (FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank)); +} + +/** + * @} + */ + +/** @defgroup SDRAM_Exported_Functions_Group4 State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### SDRAM State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the SDRAM controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SDRAM state. + * @param hsdram pointer to a SDRAM_HandleTypeDef structure that contains + * the configuration information for SDRAM module. + * @retval HAL state + */ +HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram) +{ + return hsdram->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SDRAM_Private_Functions SDRAM Private Functions + * @{ + */ +/** + * @brief MDMA SDRAM process complete callback. + * @param hmdma : MDMA handle + * @retval None + */ +static void SDRAM_DMACplt(MDMA_HandleTypeDef *hmdma) +{ + SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hmdma->Parent); + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_READY; + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + hsdram->DmaXferCpltCallback(hmdma); +#else + HAL_SDRAM_DMA_XferCpltCallback(hmdma); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief MDMA SRAM process complete callback. + * @param hmdma : MDMA handle + * @retval None + */ +static void SDRAM_DMACpltProt(MDMA_HandleTypeDef *hmdma) +{ + SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hmdma->Parent); + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED; + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + hsdram->DmaXferCpltCallback(hmdma); +#else + HAL_SDRAM_DMA_XferCpltCallback(hmdma); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief MDMA SDRAM error callback. + * @param hmdma : MDMA handle + * @retval None + */ +static void SDRAM_DMAError(MDMA_HandleTypeDef *hmdma) +{ + SDRAM_HandleTypeDef *hsdram = (SDRAM_HandleTypeDef *)(hmdma->Parent); + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Update the SDRAM controller state */ + hsdram->State = HAL_SDRAM_STATE_ERROR; + +#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1) + hsdram->DmaXferErrorCallback(hmdma); +#else + HAL_SDRAM_DMA_XferErrorCallback(hmdma); +#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */ +} + +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sram.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sram.c new file mode 100644 index 0000000..94d93ca --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_sram.c @@ -0,0 +1,1115 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_sram.c + * @author MCD Application Team + * @brief SRAM HAL module driver. + * This file provides a generic firmware to drive SRAM memories + * mounted as external device. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a generic layered driver which contains a set of APIs used to + control SRAM memories. It uses the FMC layer functions to interface + with SRAM devices. + The following sequence should be followed to configure the FMC to interface + with SRAM/PSRAM memories: + + (#) Declare a SRAM_HandleTypeDef handle structure, for example: + SRAM_HandleTypeDef hsram; and: + + (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed + values of the structure member. + + (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined + base register instance for NOR or SRAM device + + (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined + base register instance for NOR or SRAM extended mode + + (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended + mode timings; for example: + FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming; + and fill its fields with the allowed values of the structure member. + + (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function + performs the following sequence: + + (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit() + (##) Control register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Init() + (##) Timing register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Timing_Init() + (##) Extended mode Timing register configuration using the FMC NORSRAM interface function + FMC_NORSRAM_Extended_Timing_Init() + (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE() + + (#) At this stage you can perform read/write accesses from/to the memory connected + to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the + following APIs: + (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access + (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer + + (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/ + HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation + + (#) You can continuously monitor the SRAM device HAL state by calling the function + HAL_SRAM_GetState() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_SRAM_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) MspInitCallback : SRAM MspInit. + (+) MspDeInitCallback : SRAM MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_SRAM_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) MspInitCallback : SRAM MspInit. + (+) MspDeInitCallback : SRAM MspDeInit. + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_SRAM_Init and if the state is HAL_SRAM_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_SRAM_Init + and HAL_SRAM_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SRAM_Init and HAL_SRAM_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SRAM_RegisterCallback before calling HAL_SRAM_DeInit + or HAL_SRAM_Init function. + + When The compilation define USE_HAL_SRAM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +#ifdef HAL_SRAM_MODULE_ENABLED + +/** @defgroup SRAM SRAM + * @brief SRAM driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SRAM_Private_Functions SRAM Private Functions + * @{ + */ +static void SRAM_DMACplt(MDMA_HandleTypeDef *hmdma); +static void SRAM_DMACpltProt(MDMA_HandleTypeDef *hmdma); +static void SRAM_DMAError(MDMA_HandleTypeDef *hmdma); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SRAM_Exported_Functions SRAM Exported Functions + * @{ + */ + +/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * + @verbatim + ============================================================================== + ##### SRAM Initialization and de_initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to initialize/de-initialize + the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Performs the SRAM device initialization sequence + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param Timing Pointer to SRAM control timing structure + * @param ExtTiming Pointer to SRAM extended mode timing structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, + FMC_NORSRAM_TimingTypeDef *ExtTiming) +{ + /* Check the SRAM handle parameter */ + if (hsram == NULL) + { + return HAL_ERROR; + } + + if (hsram->State == HAL_SRAM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsram->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + if (hsram->MspInitCallback == NULL) + { + hsram->MspInitCallback = HAL_SRAM_MspInit; + } + hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + + /* Init the low level hardware */ + hsram->MspInitCallback(hsram); +#else + /* Initialize the low level hardware (MSP) */ + HAL_SRAM_MspInit(hsram); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + } + + /* Initialize SRAM control Interface */ + (void)FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init)); + + /* Initialize SRAM timing Interface */ + (void)FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank); + + /* Initialize SRAM extended mode timing Interface */ + (void)FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, + hsram->Init.ExtendedMode); + + /* Enable the NORSRAM device */ + __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank); + + /* Enable FMC Peripheral */ + __FMC_ENABLE(); + + /* Initialize the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Performs the SRAM device De-initialization sequence. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram) +{ +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + if (hsram->MspDeInitCallback == NULL) + { + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + } + + /* DeInit the low level hardware */ + hsram->MspDeInitCallback(hsram); +#else + /* De-Initialize the low level hardware (MSP) */ + HAL_SRAM_MspDeInit(hsram); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + + /* Configure the SRAM registers with their reset values */ + (void)FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank); + + /* Reset the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsram); + + return HAL_OK; +} + +/** + * @brief SRAM MSP Init. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspInit could be implemented in the user file + */ +} + +/** + * @brief SRAM MSP DeInit. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsram); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete callback. + * @param hmdma pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferCpltCallback(MDMA_HandleTypeDef *hmdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file + */ +} + +/** + * @brief DMA transfer complete error callback. + * @param hmdma pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval None + */ +__weak void HAL_SRAM_DMA_XferErrorCallback(MDMA_HandleTypeDef *hmdma) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hmdma); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group2 Input Output and memory control functions + * @brief Input Output and memory control functions + * + @verbatim + ============================================================================== + ##### SRAM Input and Output functions ##### + ============================================================================== + [..] + This section provides functions allowing to use and control the SRAM memory + +@endverbatim + * @{ + */ + +/** + * @brief Reads 8-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *psramaddress = (uint8_t *)pAddress; + uint8_t *pdestbuff = pDstBuffer; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *psramaddress; + pdestbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 8-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint8_t *psramaddress = (uint8_t *)pAddress; + uint8_t *psrcbuff = pSrcBuffer; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *psramaddress = *psrcbuff; + psrcbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 16-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint16_t *pdestbuff = pDstBuffer; + uint8_t limit; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Check if the size is a 32-bits multiple */ + limit = (((BufferSize % 2U) != 0U) ? 1U : 0U); + + /* Read data from memory */ + for (size = BufferSize; size != limit; size -= 2U) + { + *pdestbuff = (uint16_t)((*psramaddress) & 0x0000FFFFU); + pdestbuff++; + *pdestbuff = (uint16_t)(((*psramaddress) & 0xFFFF0000U) >> 16U); + pdestbuff++; + psramaddress++; + } + + /* Read last 16-bits if size is not 32-bits multiple */ + if (limit != 0U) + { + *pdestbuff = (uint16_t)((*psramaddress) & 0x0000FFFFU); + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 16-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint16_t *psrcbuff = pSrcBuffer; + uint8_t limit; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Check if the size is a 32-bits multiple */ + limit = (((BufferSize % 2U) != 0U) ? 1U : 0U); + + /* Write data to memory */ + for (size = BufferSize; size != limit; size -= 2U) + { + *psramaddress = (uint32_t)(*psrcbuff); + psrcbuff++; + *psramaddress |= ((uint32_t)(*psrcbuff) << 16U); + psrcbuff++; + psramaddress++; + } + + /* Write last 16-bits if size is not 32-bits multiple */ + if (limit != 0U) + { + *psramaddress = ((uint32_t)(*psrcbuff) & 0x0000FFFFU) | ((*psramaddress) & 0xFFFF0000U); + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads 32-bit buffer from SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint32_t *pdestbuff = pDstBuffer; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Read data from memory */ + for (size = BufferSize; size != 0U; size--) + { + *pdestbuff = *psramaddress; + pdestbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = state; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Writes 32-bit buffer to SRAM memory. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + uint32_t size; + __IO uint32_t *psramaddress = pAddress; + uint32_t *psrcbuff = pSrcBuffer; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Write data to memory */ + for (size = BufferSize; size != 0U; size--) + { + *psramaddress = *psrcbuff; + psrcbuff++; + psramaddress++; + } + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Reads a Words data from the SRAM memory using DMA transfer. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to read start address + * @param pDstBuffer Pointer to destination buffer + * @param BufferSize Size of the buffer to read from memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + HAL_SRAM_StateTypeDef state = hsram->State; + + /* Check the SRAM controller state */ + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + if (state == HAL_SRAM_STATE_READY) + { + hsram->hmdma->XferCpltCallback = SRAM_DMACplt; + } + else + { + hsram->hmdma->XferCpltCallback = SRAM_DMACpltProt; + } + hsram->hmdma->XferErrorCallback = SRAM_DMAError; + + /* Enable the DMA Stream */ + status = HAL_MDMA_Start_IT(hsram->hmdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)(BufferSize * 4U), 1); + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Writes a Words data buffer to SRAM memory using DMA transfer. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @param pAddress Pointer to write start address + * @param pSrcBuffer Pointer to source buffer to write + * @param BufferSize Size of the buffer to write to memory + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, + uint32_t BufferSize) +{ + HAL_StatusTypeDef status; + + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Configure DMA user callbacks */ + hsram->hmdma->XferCpltCallback = SRAM_DMACplt; + hsram->hmdma->XferErrorCallback = SRAM_DMAError; + + /* Enable the DMA Stream */ + status = HAL_MDMA_Start_IT(hsram->hmdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)(BufferSize * 4U), 1); + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + status = HAL_ERROR; + } + + return status; +} + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SRAM Callback + * To be used to override the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_MSP_INIT_CB_ID SRAM MspInit callback ID + * @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID SRAM MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_RegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_RESET) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = pCallback; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User SRAM Callback + * SRAM Callback is redirected to the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_MSP_INIT_CB_ID SRAM MspInit callback ID + * @arg @ref HAL_SRAM_MSP_DEINIT_CB_ID SRAM MspDeInit callback ID + * @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID SRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID SRAM DMA Xfer Error callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = HAL_SRAM_MspInit; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + break; + case HAL_SRAM_DMA_XFER_CPLT_CB_ID : + hsram->DmaXferCpltCallback = HAL_SRAM_DMA_XferCpltCallback; + break; + case HAL_SRAM_DMA_XFER_ERR_CB_ID : + hsram->DmaXferErrorCallback = HAL_SRAM_DMA_XferErrorCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (state == HAL_SRAM_STATE_RESET) + { + switch (CallbackId) + { + case HAL_SRAM_MSP_INIT_CB_ID : + hsram->MspInitCallback = HAL_SRAM_MspInit; + break; + case HAL_SRAM_MSP_DEINIT_CB_ID : + hsram->MspDeInitCallback = HAL_SRAM_MspDeInit; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User SRAM Callback for DMA transfers + * To be used to override the weak predefined callback + * @param hsram : SRAM handle + * @param CallbackId : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SRAM_DMA_XFER_CPLT_CB_ID SRAM DMA Xfer Complete callback ID + * @arg @ref HAL_SRAM_DMA_XFER_ERR_CB_ID SRAM DMA Xfer Error callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId, + pSRAM_DmaCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_SRAM_StateTypeDef state; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hsram); + + state = hsram->State; + if ((state == HAL_SRAM_STATE_READY) || (state == HAL_SRAM_STATE_PROTECTED)) + { + switch (CallbackId) + { + case HAL_SRAM_DMA_XFER_CPLT_CB_ID : + hsram->DmaXferCpltCallback = pCallback; + break; + case HAL_SRAM_DMA_XFER_ERR_CB_ID : + hsram->DmaXferErrorCallback = pCallback; + break; + default : + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* update return status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hsram); + return status; +} +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group3 Control functions + * @brief Control functions + * +@verbatim + ============================================================================== + ##### SRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the SRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically SRAM write operation. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram) +{ + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_PROTECTED) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Enable write operation */ + (void)FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Disables dynamically SRAM write operation. + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram) +{ + /* Check the SRAM controller state */ + if (hsram->State == HAL_SRAM_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsram); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_BUSY; + + /* Disable write operation */ + (void)FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_PROTECTED; + + /* Process unlocked */ + __HAL_UNLOCK(hsram); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup SRAM_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + ============================================================================== + ##### SRAM State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the SRAM controller + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the SRAM controller state + * @param hsram pointer to a SRAM_HandleTypeDef structure that contains + * the configuration information for SRAM module. + * @retval HAL state + */ +HAL_SRAM_StateTypeDef HAL_SRAM_GetState(const SRAM_HandleTypeDef *hsram) +{ + return hsram->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SRAM_Private_Functions SRAM Private Functions + * @{ + */ + +/** + * @brief MDMA SRAM process complete callback. + * @param hmdma : MDMA handle + * @retval None + */ +static void SRAM_DMACplt(MDMA_HandleTypeDef *hmdma) +{ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hmdma->Parent); + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_READY; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferCpltCallback(hmdma); +#else + HAL_SRAM_DMA_XferCpltCallback(hmdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief MDMA SRAM process complete callback. + * @param hmdma : MDMA handle + * @retval None + */ +static void SRAM_DMACpltProt(MDMA_HandleTypeDef *hmdma) +{ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hmdma->Parent); + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_PROTECTED; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferCpltCallback(hmdma); +#else + HAL_SRAM_DMA_XferCpltCallback(hmdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @brief MDMA SRAM error callback. + * @param hmdma : MDMA handle + * @retval None + */ +static void SRAM_DMAError(MDMA_HandleTypeDef *hmdma) +{ + SRAM_HandleTypeDef *hsram = (SRAM_HandleTypeDef *)(hmdma->Parent); + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Update the SRAM controller state */ + hsram->State = HAL_SRAM_STATE_ERROR; + +#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1) + hsram->DmaXferErrorCallback(hmdma); +#else + HAL_SRAM_DMA_XferErrorCallback(hmdma); +#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SRAM_MODULE_ENABLED */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c new file mode 100644 index 0000000..1020295 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c @@ -0,0 +1,7925 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + (+) Break2Callback : TIM Break2 Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + default: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + uint32_t itsource = htim->Instance->DIER; + uint32_t itflag = htim->Instance->SR; + + /* Capture compare 1 event */ + if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1)) + { + if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1)) + { + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2)) + { + if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3)) + { + if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4)) + { + if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE)) + { + if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK)) || \ + ((itflag & (TIM_FLAG_SYSTEM_BREAK)) == (TIM_FLAG_SYSTEM_BREAK))) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK | TIM_FLAG_SYSTEM_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break2 input event */ + if ((itflag & (TIM_FLAG_BREAK2)) == (TIM_FLAG_BREAK2)) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->Break2Callback(htim); +#else + HAL_TIMEx_Break2Callback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER)) + { + if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM)) + { + if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 5 in Output Compare */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 6 in Output Compare */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_4) + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + else + { + status = HAL_ERROR; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the Channel 5 in PWM mode */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel5*/ + htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the Channel 6 in PWM mode */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel6 */ + htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + HAL_StatusTypeDef status = HAL_OK; + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA stream) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA stream) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant + * only for timer instances supporting break input(s). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + case TIM_CHANNEL_5: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 5 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + else + { + /* Disable the OCREF clear feature for Channel 5 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + break; + } + case TIM_CHANNEL_6: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 6 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + else + { + /* Disable the OCREF clear feature for Channel 6 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + break; + } + default: + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + case TIM_CLOCKSOURCE_ITR4: + case TIM_CLOCKSOURCE_ITR5: + case TIM_CLOCKSOURCE_ITR6: + case TIM_CLOCKSOURCE_ITR7: + case TIM_CLOCKSOURCE_ITR8: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + status = HAL_ERROR; + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + /* Legacy weak Commutation half complete Callback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + /* Legacy weak Break2 Callback */ + htim->Break2Callback = HAL_TIMEx_Break2Callback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; + + /* Check if the update flag is set after the Update Generation, if so clear the UIF flag */ + if (HAL_IS_BIT_SET(TIMx->SR, TIM_FLAG_UPDATE)) + { + /* Clear the update flag */ + CLEAR_BIT(TIMx->SR, TIM_FLAG_UPDATE); + } +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 5 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC5E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC5M); + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC5P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS5; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 8U); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR5 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 6 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC6E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC6M); + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= (uint32_t)~TIM_CCER_CC6P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS6; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 10U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR6 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + case TIM_TS_ITR4: + case TIM_TS_ITR5: + case TIM_TS_ITR6: + case TIM_TS_ITR7: + case TIM_TS_ITR8: + case TIM_TS_ITR9: + case TIM_TS_ITR10: + case TIM_TS_ITR11: + case TIM_TS_ITR12: + case TIM_TS_ITR13: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_ITR4: Internal Trigger 4 (*) + * @arg TIM_TS_ITR5: Internal Trigger 5 + * @arg TIM_TS_ITR6: Internal Trigger 6 + * @arg TIM_TS_ITR7: Internal Trigger 7 + * @arg TIM_TS_ITR8: Internal Trigger 8 (*) + * @arg TIM_TS_ITR9: Internal Trigger 9 (*) + * @arg TIM_TS_ITR10: Internal Trigger 10 (*) + * @arg TIM_TS_ITR11: Internal Trigger 11 (*) + * @arg TIM_TS_ITR12: Internal Trigger 12 (*) + * @arg TIM_TS_ITR13: Internal Trigger 13 (*) + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * + * (*) Value not defined in all devices. + * + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; + htim->Break2Callback = HAL_TIMEx_Break2Callback; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c new file mode 100644 index 0000000..21ef06b --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c @@ -0,0 +1,2921 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Timer remapping capabilities configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), + HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(TIM_BDTR_BKBID) +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Constants TIM Extended Private Constants + * @{ + */ +/* Timeout for break input rearm */ +#define TIM_BREAKINPUT_REARM_TIMEOUT 5UL /* 5 milliseconds */ +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +#endif /* TIM_BDTR_BKBID */ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Select timer input source. + (+) Enable or disable channel grouping. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR12: Internal trigger 12 selected (*) + * @arg TIM_TS_ITR13: Internal trigger 13 selected (*) + * @arg TIM_TS_NONE: No trigger is needed + * + * (*) Value not defined in all devices. + * + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3) || + (InputTrigger == TIM_TS_ITR12) || (InputTrigger == TIM_TS_ITR13)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR12: Internal trigger 12 selected (*) + * @arg TIM_TS_ITR13: Internal trigger 13 selected (*) + * @arg TIM_TS_NONE: No trigger is needed + * + * (*) Value not defined in all devices. + * + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3) || + (InputTrigger == TIM_TS_ITR12) || (InputTrigger == TIM_TS_ITR13)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR12: Internal trigger 12 selected (*) + * @arg TIM_TS_ITR13: Internal trigger 13 selected (*) + * @arg TIM_TS_NONE: No trigger is needed + * + * (*) Value not defined in all devices. + * + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3) || + (InputTrigger == TIM_TS_ITR12) || (InputTrigger == TIM_TS_ITR13)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ + if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); + + /* Clear the MMS2 bits */ + tmpcr2 &= ~TIM_CR2_MMS2; + /* Select the TRGO2 source*/ + tmpcr2 |= sMasterConfig->MasterOutputTrigger2; + } + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); +#if defined(TIM_BDTR_BKBID) + assert_param(IS_TIM_BREAK_AFMODE(sBreakDeadTimeConfig->BreakAFMode)); +#endif /* TIM_BDTR_BKBID */ + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); +#if defined(TIM_BDTR_BKBID) + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, sBreakDeadTimeConfig->BreakAFMode); +#endif /* TIM_BDTR_BKBID */ + + if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); + assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); +#if defined(TIM_BDTR_BKBID) + assert_param(IS_TIM_BREAK2_AFMODE(sBreakDeadTimeConfig->Break2AFMode)); +#endif /* TIM_BDTR_BKBID */ + + /* Set the BREAK2 input related BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); +#if defined(TIM_BDTR_BKBID) + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, sBreakDeadTimeConfig->Break2AFMode); +#endif /* TIM_BDTR_BKBID */ + } + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} +#if defined(TIM_BREAK_INPUT_SUPPORT) + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) + { + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + } + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM1_AF1_BKINE; + bkin_enable_bitpos = TIM1_AF1_BKINE_Pos; + bkin_polarity_mask = TIM1_AF1_BKINP; + bkin_polarity_bitpos = TIM1_AF1_BKINP_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP1: + { + bkin_enable_mask = TIM1_AF1_BKCMP1E; + bkin_enable_bitpos = TIM1_AF1_BKCMP1E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP1P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP1P_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP2: + { + bkin_enable_mask = TIM1_AF1_BKCMP2E; + bkin_enable_bitpos = TIM1_AF1_BKCMP2E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP2P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP2P_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_DFSDM1: + { + bkin_enable_mask = TIM1_AF1_BKDF1BK0E; + bkin_enable_bitpos = TIM1_AF1_BKDF1BK0E_Pos; + bkin_polarity_mask = 0U; + bkin_polarity_bitpos = 0U; + break; + } + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_AF1 register value */ + tmporx = htim->Instance->AF1; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) + { + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + } + + /* Set TIMx_AF1 */ + htim->Instance->AF1 = tmporx; + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Get the TIMx_AF2 register value */ + tmporx = htim->Instance->AF2; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) + { + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + } + + /* Set TIMx_AF2 */ + htim->Instance->AF2 = tmporx; + break; + } + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} +#endif /*TIM_BREAK_INPUT_SUPPORT */ + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM1, the parameter is one of the following values: + * @arg TIM_TIM1_ETR_GPIO: TIM1_ETR is connected to GPIO + * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output + * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output + * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 + * @arg TIM_TIM1_ETR_ADC3_AWD1: TIM1_ETR is connected to ADC3 AWD1 + * @arg TIM_TIM1_ETR_ADC3_AWD2: TIM1_ETR is connected to ADC3 AWD2 + * @arg TIM_TIM1_ETR_ADC3_AWD3: TIM1_ETR is connected to ADC3 AWD3 + * + * For TIM2, the parameter is one of the following values: + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output + * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output + * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE + * @arg TIM_TIM2_ETR_SAI1_FSA: TIM2_ETR is connected to SAI1 FS_A + * @arg TIM_TIM2_ETR_SAI1_FSB: TIM2_ETR is connected to SAI1 FS_B + * + * For TIM3, the parameter is one of the following values: + * @arg TIM_TIM3_ETR_GPIO: TIM3_ETR is connected to GPIO + * @arg TIM_TIM3_ETR_COMP1: TIM3_ETR is connected to COMP1 output + * + * For TIM5, the parameter is one of the following values: + * @arg TIM_TIM5_ETR_GPIO: TIM5_ETR is connected to GPIO + * @arg TIM_TIM5_ETR_SAI2_FSA: TIM5_ETR is connected to SAI2 FS_A (*) + * @arg TIM_TIM5_ETR_SAI2_FSB: TIM5_ETR is connected to SAI2 FS_B (*) + * @arg TIM_TIM5_ETR_SAI4_FSA: TIM5_ETR is connected to SAI2 FS_A (*) + * @arg TIM_TIM5_ETR_SAI4_FSB: TIM5_ETR is connected to SAI2 FS_B (*) + * + * For TIM8, the parameter is one of the following values: + * @arg TIM_TIM8_ETR_GPIO: TIM8_ETR is connected to GPIO + * @arg TIM_TIM8_ETR_COMP1: TIM8_ETR is connected to COMP1 output + * @arg TIM_TIM8_ETR_COMP2: TIM8_ETR is connected to COMP2 output + * @arg TIM_TIM8_ETR_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1 + * @arg TIM_TIM8_ETR_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2 + * @arg TIM_TIM8_ETR_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3 + * @arg TIM_TIM8_ETR_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1 + * @arg TIM_TIM8_ETR_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2 + * @arg TIM_TIM8_ETR_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3 + * + * For TIM23, the parameter is one of the following values: (*) + * @arg TIM_TIM23_ETR_GPIO TIM23_ETR is connected to GPIO + * @arg TIM_TIM23_ETR_COMP1 TIM23_ETR is connected to COMP1 output + * @arg TIM_TIM23_ETR_COMP2 TIM23_ETR is connected to COMP2 output + * + * For TIM24, the parameter is one of the following values: (*) + * @arg TIM_TIM24_ETR_GPIO TIM24_ETR is connected to GPIO + * @arg TIM_TIM24_ETR_SAI4_FSA TIM24_ETR is connected to SAI4 FS_A + * @arg TIM_TIM24_ETR_SAI4_FSB TIM24_ETR is connected to SAI4 FS_B + * @arg TIM_TIM24_ETR_SAI1_FSA TIM24_ETR is connected to SAI1 FS_A + * @arg TIM_TIM24_ETR_SAI1_FSB TIM24_ETR is connected to SAI1 FS_B + * + * (*) Value not defined in all devices. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(Remap)); + + __HAL_LOCK(htim); + + MODIFY_REG(htim->Instance->AF1, TIM1_AF1_ETRSEL_Msk, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Select the timer input source + * @param htim TIM handle. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TI1 input channel + * @arg TIM_CHANNEL_2: TI2 input channel + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @param TISelection parameter of the TIM_TISelectionStruct structure is detailed as follows: + * For TIM1, the parameter is one of the following values: + * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * + * For TIM2, the parameter is one of the following values: + * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO + * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output + * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output + * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output + * + * For TIM3, the parameter is one of the following values: + * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO + * @arg TIM_TIM3_TI1_COMP1: TIM3 TI1 is connected to COMP1 output + * @arg TIM_TIM3_TI1_COMP2: TIM3 TI1 is connected to COMP2 output + * @arg TIM_TIM3_TI1_COMP1_COMP2: TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output + * + * For TIM5, the parameter is one of the following values: + * @arg TIM_TIM5_TI1_GPIO: TIM5 TI1 is connected to GPIO + * @arg TIM_TIM5_TI1_CAN_TMP: TIM5 TI1 is connected to CAN TMP + * @arg TIM_TIM5_TI1_CAN_RTP: TIM5 TI1 is connected to CAN RTP + * + * For TIM8, the parameter is one of the following values: + * @arg TIM_TIM8_TI1_GPIO: TIM8 TI1 is connected to GPIO + * @arg TIM_TIM8_TI1_COMP2: TIM8 TI1 is connected to COMP2 output + * + * For TIM12, the parameter can have the following values: (*) + * @arg TIM_TIM12_TI1_GPIO: TIM12 TI1 is connected to GPIO + * @arg TIM_TIM12_TI1_SPDIF_FS: TIM12 TI1 is connected to SPDIF FS + * + * For TIM15, the parameter is one of the following values: + * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO + * @arg TIM_TIM15_TI1_TIM2_CH1: TIM15 TI1 is connected to TIM2 CH1 + * @arg TIM_TIM15_TI1_TIM3_CH1: TIM15 TI1 is connected to TIM3 CH1 + * @arg TIM_TIM15_TI1_TIM4_CH1: TIM15 TI1 is connected to TIM4 CH1 + * @arg TIM_TIM15_TI1_RCC_LSE: TIM15 TI1 is connected to LSE + * @arg TIM_TIM15_TI1_RCC_CSI: TIM15 TI1 is connected to CSI + * @arg TIM_TIM15_TI1_RCC_MCO2: TIM15 TI1 is connected to MCO2 + * @arg TIM_TIM15_TI2_GPIO: TIM15 TI2 is connected to GPIO + * @arg TIM_TIM15_TI2_TIM2_CH2: TIM15 TI2 is connected to TIM2 CH2 + * @arg TIM_TIM15_TI2_TIM3_CH2: TIM15 TI2 is connected to TIM3 CH2 + * @arg TIM_TIM15_TI2_TIM4_CH2: TIM15 TI2 is connected to TIM4 CH2 + * + * For TIM16, the parameter can have the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_RCC_LSI: TIM16 TI1 is connected to LSI + * @arg TIM_TIM16_TI1_RCC_LSE: TIM16 TI1 is connected to LSE + * @arg TIM_TIM16_TI1_WKUP_IT: TIM16 TI1 is connected to RTC wakeup interrupt + * + * For TIM17, the parameter can have the following values: + * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO + * @arg TIM_TIM17_TI1_SPDIF_FS: TIM17 TI1 is connected to SPDIF FS (*) + * @arg TIM_TIM17_TI1_RCC_HSE1MHZ: TIM17 TI1 is connected to HSE 1MHz + * @arg TIM_TIM17_TI1_RCC_MCO1: TIM17 TI1 is connected to MCO1 + * + * For TIM23, the parameter can have the following values: (*) + * @arg TIM_TIM23_TI4_GPIO TIM23_TI4 is connected to GPIO + * @arg TIM_TIM23_TI4_COMP1 TIM23_TI4 is connected to COMP1 output + * @arg TIM_TIM23_TI4_COMP2 TIM23_TI4 is connected to COMP2 output + * @arg TIM_TIM23_TI4_COMP1_COMP2 TIM23_TI4 is connected to COMP2 output + * + * For TIM24, the parameter can have the following values: (*) + * @arg TIM_TIM24_TI1_GPIO TIM24_TI1 is connected to GPIO + * @arg TIM_TIM24_TI1_CAN_TMP TIM24_TI1 is connected to CAN_TMP + * @arg TIM_TIM24_TI1_CAN_RTP TIM24_TI1 is connected to CAN_RTP + * @arg TIM_TIM24_TI1_CAN_SOC TIM24_TI1 is connected to CAN_SOC + * + * (*) Value not defined in all devices. \n + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_TIM_TISEL_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TISEL(TISelection)); + + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI1SEL, TISelection); + break; + case TIM_CHANNEL_2: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI2SEL, TISelection); + break; + case TIM_CHANNEL_3: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI3SEL, TISelection); + break; + case TIM_CHANNEL_4: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI4SEL, TISelection); + break; + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Group channel 5 and channel 1, 2 or 3 + * @param htim TIM handle. + * @param Channels specifies the reference signal(s) the OC5REF is combined with. + * This parameter can be any combination of the following values: + * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC + * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF + * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF + * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) +{ + /* Check parameters */ + assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_GROUPCH5(Channels)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Clear GC5Cx bit fields */ + htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); + + /* Set GC5Cx bit fields */ + htim->Instance->CCR5 |= Channels; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} +#if defined(TIM_BDTR_BKBID) + +/** + * @brief Disarm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to disarm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpbdtr; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM); + } + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM); + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Arm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to arm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note Arming is possible at anytime, even if fault is present. + * @note Break input is automatically armed as soon as MOE bit is set. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(const TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) + { + /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) + { + /* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif /* TIM_BDTR_BKBID */ + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Commutation callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Commutation half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} + +/** + * @brief Break2 detection callback in non blocking mode + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIMEx_Break2Callback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0xFU); /* 0xFU = 15 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0xFU)); /* 0xFU = 15 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c new file mode 100644 index 0000000..3465d29 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c @@ -0,0 +1,4719 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_UART_RegisterCallback() to register a user callback. + Function HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_UART_Init() + and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() + or HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \ + USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + +#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ +#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup UART_Private_variables + * @{ + */ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; +/** + * @} + */ + +/* Exported Constants --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used to override the weak predefined callback + * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to un-register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced + reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + /* Enable the TX FIFO threshold interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + && ((isrflags & USART_ISR_IDLE) != 0U) + && ((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ((nb_remaining_rx_data > 0U) + && (nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (huart->hdmarx->Init.Mode != DMA_CIRCULAR) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ((huart->RxXferCount > 0U) + && (nb_rx_data > 0U)) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t lpuart_ker_ck_pres; + PLL2_ClocksTypeDef pll2_clocks; + PLL3_ClocksTypeDef pll3_clocks; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + if (UART_INSTANCE_LOWPOWER(huart)) + { + assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); + } + else + { + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + } + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + if (!(UART_INSTANCE_LOWPOWER(huart))) + { + tmpreg |= huart->Init.OneBitSampling; + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + { + /* Retrieve frequency clock */ + switch (clocksource) + { + case UART_CLOCKSOURCE_D3PCLK1: + pclk = HAL_RCCEx_GetD3PCLK1Freq(); + break; + case UART_CLOCKSOURCE_PLL2: + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + pclk = pll2_clocks.PLL2_Q_Frequency; + break; + case UART_CLOCKSOURCE_PLL3: + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + pclk = pll3_clocks.PLL3_Q_Frequency; + break; + case UART_CLOCKSOURCE_HSI: + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + pclk = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3U)); + } + else + { + pclk = (uint32_t) HSI_VALUE; + } + break; + case UART_CLOCKSOURCE_CSI: + pclk = (uint32_t) CSI_VALUE; + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* If proper clock source reported */ + if (pclk != 0U) + { + /* Compute clock after Prescaler */ + lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); + + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || + (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + /* Check computed UsartDiv value is in allocated range + (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_D2PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_D2PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + break; + case UART_CLOCKSOURCE_PLL2: + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + pclk = pll2_clocks.PLL2_Q_Frequency; + break; + case UART_CLOCKSOURCE_PLL3: + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + pclk = pll3_clocks.PLL3_Q_Frequency; + break; + case UART_CLOCKSOURCE_HSI: + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + pclk = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3U)); + } + else + { + pclk = (uint32_t) HSI_VALUE; + } + break; + case UART_CLOCKSOURCE_CSI: + pclk = (uint32_t) CSI_VALUE; + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_D2PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_D2PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + break; + case UART_CLOCKSOURCE_PLL2: + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + pclk = pll2_clocks.PLL2_Q_Frequency; + break; + case UART_CLOCKSOURCE_PLL3: + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + pclk = pll3_clocks.PLL3_Q_Frequency; + break; + case UART_CLOCKSOURCE_HSI: + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + pclk = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3U)); + } + else + { + pclk = (uint32_t) HSI_VALUE; + } + break; + case UART_CLOCKSOURCE_CSI: + pclk = (uint32_t) CSI_VALUE; + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = (uint16_t)usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable TXE interrupt for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE)); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + + return HAL_TIMEOUT; + } + + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_ORE; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->RxState to ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + + /* Enable the UART Parity Error Interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, TXFT interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (hdma->Init.Mode != DMA_CIRCULAR) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (hdma->Init.Mode != DMA_CIRCULAR) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Half Transfer */ + huart->RxEventType = HAL_UART_RXEVENT_HT; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize / 2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c new file mode 100644 index 0000000..6e5c0b2 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c @@ -0,0 +1,1042 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 16U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 16U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + + (#) TX/RX Fifos Callbacks: + (+) HAL_UARTEx_RxFifoFullCallback() + (+) HAL_UARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data + * is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received + * (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data + * is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + (void)UART_Start_Receive_IT(huart, pData, Size); + + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number + * of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Provide Rx Event type that has lead to RxEvent callback execution. + * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress + * of reception process is provided to application through calls of Rx Event callback (either default one + * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, + * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead + * to Rx Event callback execution. + * @note This function is expected to be called within the user implementation of Rx Event Callback, + * in order to provide the accurate value : + * In Interrupt Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one) + * In DMA Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one). + * In DMA mode, RxEvent callback could be called several times; + * When DMA is configured in Normal Mode, HT event does not stop Reception process; + * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; + * @param huart UART handle. + * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values) + */ +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart) +{ + /* Return Rx Event type value, as stored in UART handle */ + return (huart->RxEventType); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_delayblock.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_delayblock.c new file mode 100644 index 0000000..d7ac9bc --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_delayblock.c @@ -0,0 +1,214 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_delayblock.c + * @author MCD Application Team + * @brief DelayBlock Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Delay Block peripheral: + * + input clock frequency range 25MHz to 208MHz + * + up to 12 oversampling phases + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### DelayBlock peripheral features ##### + ============================================================================== + [..] The Delay block is used to generate an Output clock which is de-phased from the Input + clock. The phase of the Output clock is programmed by FW. The Output clock is then used + to clock the receive data in i.e. a SDMMC or QSPI interface. + The delay is Voltage and Temperature dependent, which may require FW to do re-tuning + and recenter the Output clock phase to the receive data. + + [..] The Delay Block features include the following: + (+) Input clock frequency range 25MHz to 208MHz. + (+) Up to 12 oversampling phases. + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a considered as a driver of service for external devices drivers + that interfaces with the DELAY peripheral. + The DelayBlock_Enable() function, enables the DelayBlock instance, configure the delay line length + and configure the Output clock phase. + The DelayBlock_Disable() function, disables the DelayBlock instance by setting DEN flag to 0. + + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup DELAYBLOCK_LL DELAYBLOCK_LL + * @brief Low layer module for Delay Block + * @{ + */ + +#if defined(HAL_SD_MODULE_ENABLED) || defined(HAL_QSPI_MODULE_ENABLED) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup DelayBlock_LL_Private_Defines Delay Block Low Layer Private Defines + * @{ + */ +#define DLYB_TIMEOUT 0xFFU +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DelayBlock_LL_Exported_Functions Delay Block Low Layer Exported Functions + * @{ + */ + +/** @defgroup HAL_DELAY_LL_Group1 Initialization de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + + +/** + * @brief Enable the Delay Block instance. + * @param DLYBx: Pointer to DLYB instance. + * @retval HAL status + */ +HAL_StatusTypeDef DelayBlock_Enable(DLYB_TypeDef *DLYBx) +{ + uint32_t unit = 0U; + uint32_t sel = 0U; + uint32_t sel_current; + uint32_t unit_current; + uint32_t tuning; + uint32_t lng_mask; + uint32_t tickstart; + + DLYBx->CR = DLYB_CR_DEN | DLYB_CR_SEN; + + for (sel_current = 0U; sel_current < DLYB_MAX_SELECT; sel_current++) + { + /* lng_mask is the mask bit for the LNG field to check the output of the UNITx*/ + lng_mask = DLYB_CFGR_LNG_0 << sel_current; + tuning = 0U; + for (unit_current = 0U; unit_current < DLYB_MAX_UNIT; unit_current++) + { + /* Set the Delay of the UNIT(s)*/ + DLYBx->CFGR = DLYB_MAX_SELECT | (unit_current << DLYB_CFGR_UNIT_Pos); + + /* Waiting for a LNG valid value */ + tickstart = HAL_GetTick(); + while ((DLYBx->CFGR & DLYB_CFGR_LNGF) == 0U) + { + if((HAL_GetTick() - tickstart) >= DLYB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } + if (tuning == 0U) + { + if ((DLYBx->CFGR & lng_mask) != 0U) + { + /* 1/2 period HIGH is detected */ + tuning = 1U; + } + } + else + { + /* 1/2 period LOW detected after the HIGH 1/2 period => FULL PERIOD passed*/ + if((DLYBx->CFGR & lng_mask ) == 0U) + { + /* Save the first result */ + if( unit == 0U ) + { + unit = unit_current; + sel = sel_current + 1U; + } + break; + } + } + } + } + + /* Apply the Tuning settings */ + DLYBx->CR = 0U; + DLYBx->CR = DLYB_CR_DEN | DLYB_CR_SEN; + DLYBx->CFGR = sel | (unit << DLYB_CFGR_UNIT_Pos); + DLYBx->CR = DLYB_CR_DEN; + + return HAL_OK; +} + +/** + * @brief Disable the Delay Block instance. + * @param DLYBx: Pointer to DLYB instance. + * @retval HAL status + */ +HAL_StatusTypeDef DelayBlock_Disable(DLYB_TypeDef *DLYBx) +{ + /* Disable DLYB */ + DLYBx->CR = 0U; + return HAL_OK; +} + +/** + * @brief Configure the Delay Block instance. + * @param DLYBx: Pointer to DLYB instance. + * @param PhaseSel: Phase selection [0..11]. + * @param Units: Delay units[0..127]. + * @retval HAL status + */ +HAL_StatusTypeDef DelayBlock_Configure(DLYB_TypeDef *DLYBx,uint32_t PhaseSel, uint32_t Units ) +{ + /* Apply the delay settings */ + + DLYBx->CR = 0U; + DLYBx->CR = DLYB_CR_DEN | DLYB_CR_SEN; + DLYBx->CFGR = PhaseSel | (Units << DLYB_CFGR_UNIT_Pos); + DLYBx->CR = DLYB_CR_DEN; + + return HAL_OK; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* (HAL_SD_MODULE_ENABLED) & (HAL_QSPI_MODULE_ENABLED)*/ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_fmc.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_fmc.c new file mode 100644 index 0000000..b9fa468 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_fmc.c @@ -0,0 +1,1092 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_fmc.c + * @author MCD Application Team + * @brief FMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Flexible Memory Controller (FMC) peripheral memories: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### FMC peripheral features ##### + ============================================================================== + [..] The Flexible memory controller (FMC) includes following memory controllers: + (+) The NOR/PSRAM memory controller + (+) The NAND memory controller + (+) The Synchronous DRAM (SDRAM) controller + + [..] The FMC functional block makes the interface with synchronous and asynchronous static + memories and SDRAM memories. Its main purposes are: + (+) to translate AHB transactions into the appropriate external device protocol + (+) to meet the access time requirements of the external memory devices + + [..] All external memories share the addresses, data and control signals with the controller. + Each external device is accessed by means of a unique Chip Select. The FMC performs + only one access at a time to an external device. + The main features of the FMC controller are the following: + (+) Interface with static-memory mapped devices including: + (++) Static random access memory (SRAM) + (++) Read-only memory (ROM) + (++) NOR Flash memory/OneNAND Flash memory + (++) PSRAM (4 memory banks) + (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of + data + (+) Interface with synchronous DRAM (SDRAM) memories + (+) Independent Chip Select control for each memory bank + (+) Independent configuration for each memory bank + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ +#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED)\ + || defined(HAL_SRAM_MODULE_ENABLED) + +/** @defgroup FMC_LL FMC Low Layer + * @brief FMC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup FMC_LL_Private_Constants FMC Low Layer Private Constants + * @{ + */ + +/* ----------------------- FMC registers bit mask --------------------------- */ + +/* --- BCR Register ---*/ +/* BCR register clear mask */ + +/* --- BTR Register ---*/ +/* BTR register clear mask */ +#define BTR_CLEAR_MASK ((uint32_t)(FMC_BTRx_ADDSET | FMC_BTRx_ADDHLD |\ + FMC_BTRx_DATAST | FMC_BTRx_BUSTURN |\ + FMC_BTRx_CLKDIV | FMC_BTRx_DATLAT |\ + FMC_BTRx_ACCMOD)) + +/* --- BWTR Register ---*/ +/* BWTR register clear mask */ +#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\ + FMC_BWTRx_DATAST | FMC_BWTRx_BUSTURN |\ + FMC_BWTRx_ACCMOD)) + +/* --- PCR Register ---*/ +/* PCR register clear mask */ +#define PCR_CLEAR_MASK ((uint32_t)(FMC_PCR_PWAITEN | FMC_PCR_PBKEN | \ + FMC_PCR_PWID | FMC_PCR_ECCEN | \ + FMC_PCR_TCLR | FMC_PCR_TAR | \ + FMC_PCR_ECCPS)) +/* --- PMEM Register ---*/ +/* PMEM register clear mask */ +#define PMEM_CLEAR_MASK ((uint32_t)(FMC_PMEM_MEMSET | FMC_PMEM_MEMWAIT |\ + FMC_PMEM_MEMHOLD | FMC_PMEM_MEMHIZ)) + +/* --- PATT Register ---*/ +/* PATT register clear mask */ +#define PATT_CLEAR_MASK ((uint32_t)(FMC_PATT_ATTSET | FMC_PATT_ATTWAIT |\ + FMC_PATT_ATTHOLD | FMC_PATT_ATTHIZ)) + + +/* --- SDCR Register ---*/ +/* SDCR register clear mask */ +#define SDCR_CLEAR_MASK ((uint32_t)(FMC_SDCRx_NC | FMC_SDCRx_NR | \ + FMC_SDCRx_MWID | FMC_SDCRx_NB | \ + FMC_SDCRx_CAS | FMC_SDCRx_WP | \ + FMC_SDCRx_SDCLK | FMC_SDCRx_RBURST | \ + FMC_SDCRx_RPIPE)) + +/* --- SDTR Register ---*/ +/* SDTR register clear mask */ +#define SDTR_CLEAR_MASK ((uint32_t)(FMC_SDTRx_TMRD | FMC_SDTRx_TXSR | \ + FMC_SDTRx_TRAS | FMC_SDTRx_TRC | \ + FMC_SDTRx_TWR | FMC_SDTRx_TRP | \ + FMC_SDTRx_TRCD)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup FMC_LL_Exported_Functions FMC Low Layer Exported Functions + * @{ + */ + + +/** @defgroup FMC_LL_Exported_Functions_NORSRAM FMC Low Layer NOR SRAM Exported Functions + * @brief NORSRAM Controller functions + * + @verbatim + ============================================================================== + ##### How to use NORSRAM device driver ##### + ============================================================================== + + [..] + This driver contains a set of APIs to interface with the FMC NORSRAM banks in order + to run the NORSRAM external devices. + + (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit() + (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init() + (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init() + (+) FMC NORSRAM bank extended timing configuration using the function + FMC_NORSRAM_Extended_Timing_Init() + (+) FMC NORSRAM bank enable/disable write operation using the functions + FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable() + +@endverbatim + * @{ + */ + +/** @defgroup FMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FMC NORSRAM interface + (+) De-initialize the FMC NORSRAM interface + (+) Configure the FMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the FMC_NORSRAM device according to the specified + * control parameters in the FMC_NORSRAM_InitTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Init Pointer to NORSRAM Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_InitTypeDef *Init) +{ + uint32_t flashaccess; + uint32_t btcr_reg; + uint32_t mask; + + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank)); + assert_param(IS_FMC_MUX(Init->DataAddressMux)); + assert_param(IS_FMC_MEMORY(Init->MemoryType)); + assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode)); + assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity)); + assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); + assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation)); + assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal)); + assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode)); + assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait)); + assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst)); + assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock)); + assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo)); + assert_param(IS_FMC_PAGESIZE(Init->PageSize)); + + /* Disable NORSRAM Device */ + __FMC_NORSRAM_DISABLE(Device, Init->NSBank); + + /* Set NORSRAM device control parameters */ + if (Init->MemoryType == FMC_MEMORY_TYPE_NOR) + { + flashaccess = FMC_NORSRAM_FLASH_ACCESS_ENABLE; + } + else + { + flashaccess = FMC_NORSRAM_FLASH_ACCESS_DISABLE; + } + + btcr_reg = (flashaccess | \ + Init->DataAddressMux | \ + Init->MemoryType | \ + Init->MemoryDataWidth | \ + Init->BurstAccessMode | \ + Init->WaitSignalPolarity | \ + Init->WaitSignalActive | \ + Init->WriteOperation | \ + Init->WaitSignal | \ + Init->ExtendedMode | \ + Init->AsynchronousWait | \ + Init->WriteBurst); + + btcr_reg |= Init->ContinuousClock; + btcr_reg |= Init->WriteFifo; + btcr_reg |= Init->PageSize; + + mask = (FMC_BCRx_MBKEN | + FMC_BCRx_MUXEN | + FMC_BCRx_MTYP | + FMC_BCRx_MWID | + FMC_BCRx_FACCEN | + FMC_BCRx_BURSTEN | + FMC_BCRx_WAITPOL | + FMC_BCRx_WAITCFG | + FMC_BCRx_WREN | + FMC_BCRx_WAITEN | + FMC_BCRx_EXTMOD | + FMC_BCRx_ASYNCWAIT | + FMC_BCRx_CBURSTRW); + + mask |= FMC_BCR1_CCLKEN; + mask |= FMC_BCR1_WFDIS; + mask |= FMC_BCRx_CPSIZE; + + MODIFY_REG(Device->BTCR[Init->NSBank], mask, btcr_reg); + + /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */ + if ((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1)) + { + MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN, Init->ContinuousClock); + } + + if (Init->NSBank != FMC_NORSRAM_BANK1) + { + /* Configure Write FIFO mode when Write Fifo is enabled for bank2..4 */ + SET_BIT(Device->BTCR[FMC_NORSRAM_BANK1], (uint32_t)(Init->WriteFifo)); + } + + return HAL_OK; +} + +/** + * @brief DeInitialize the FMC_NORSRAM peripheral + * @param Device Pointer to NORSRAM device instance + * @param ExDevice Pointer to NORSRAM extended mode device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Disable the FMC_NORSRAM device */ + __FMC_NORSRAM_DISABLE(Device, Bank); + + /* De-initialize the FMC_NORSRAM device */ + /* FMC_NORSRAM_BANK1 */ + if (Bank == FMC_NORSRAM_BANK1) + { + Device->BTCR[Bank] = 0x000030DBU; + } + /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */ + else + { + Device->BTCR[Bank] = 0x000030D2U; + } + + Device->BTCR[Bank + 1U] = 0x0FFFFFFFU; + ExDevice->BWTR[Bank] = 0x0FFFFFFFU; + + return HAL_OK; +} + +/** + * @brief Initialize the FMC_NORSRAM Timing according to the specified + * parameters in the FMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, + FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) +{ + uint32_t tmpr; + + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision)); + assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency)); + assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Set FMC_NORSRAM device timing parameters */ + MODIFY_REG(Device->BTCR[Bank + 1U], BTR_CLEAR_MASK, (Timing->AddressSetupTime | + ((Timing->AddressHoldTime) << FMC_BTRx_ADDHLD_Pos) | + ((Timing->DataSetupTime) << FMC_BTRx_DATAST_Pos) | + ((Timing->BusTurnAroundDuration) << FMC_BTRx_BUSTURN_Pos) | + (((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos) | + (((Timing->DataLatency) - 2U) << FMC_BTRx_DATLAT_Pos) | + (Timing->AccessMode))); + + /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */ + if (HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN)) + { + tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~((0x0FU) << FMC_BTRx_CLKDIV_Pos)); + tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos); + MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1 + 1U], FMC_BTRx_CLKDIV, tmpr); + } + + return HAL_OK; +} + +/** + * @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified + * parameters in the FMC_NORSRAM_TimingTypeDef + * @param Device Pointer to NORSRAM device instance + * @param Timing Pointer to NORSRAM Timing structure + * @param Bank NORSRAM bank number + * @param ExtendedMode FMC Extended Mode + * This parameter can be one of the following values: + * @arg FMC_EXTENDED_MODE_DISABLE + * @arg FMC_EXTENDED_MODE_ENABLE + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, + FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, + uint32_t ExtendedMode) +{ + /* Check the parameters */ + assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + if (ExtendedMode == FMC_EXTENDED_MODE_ENABLE) + { + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device)); + assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime | + ((Timing->AddressHoldTime) << FMC_BWTRx_ADDHLD_Pos) | + ((Timing->DataSetupTime) << FMC_BWTRx_DATAST_Pos) | + Timing->AccessMode | + ((Timing->BusTurnAroundDuration) << FMC_BWTRx_BUSTURN_Pos))); + } + else + { + Device->BWTR[Bank] = 0x0FFFFFFFU; + } + + return HAL_OK; +} +/** + * @} + */ + +/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2 + * @brief management functions + * +@verbatim + ============================================================================== + ##### FMC_NORSRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FMC NORSRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Enable write operation */ + SET_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE); + + return HAL_OK; +} + +/** + * @brief Disables dynamically FMC_NORSRAM write operation. + * @param Device Pointer to NORSRAM device instance + * @param Bank NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FMC_NORSRAM_BANK(Bank)); + + /* Disable write operation */ + CLEAR_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup FMC_LL_Exported_Functions_NAND FMC Low Layer NAND Exported Functions + * @brief NAND Controller functions + * + @verbatim + ============================================================================== + ##### How to use NAND device driver ##### + ============================================================================== + [..] + This driver contains a set of APIs to interface with the FMC NAND banks in order + to run the NAND external devices. + + (+) FMC NAND bank reset using the function FMC_NAND_DeInit() + (+) FMC NAND bank control configuration using the function FMC_NAND_Init() + (+) FMC NAND bank common space timing configuration using the function + FMC_NAND_CommonSpace_Timing_Init() + (+) FMC NAND bank attribute space timing configuration using the function + FMC_NAND_AttributeSpace_Timing_Init() + (+) FMC NAND bank enable/disable ECC correction feature using the functions + FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable() + (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC() + +@endverbatim + * @{ + */ + +/** @defgroup FMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FMC NAND interface + (+) De-initialize the FMC NAND interface + (+) Configure the FMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FMC_NAND device according to the specified + * control parameters in the FMC_NAND_HandleTypeDef + * @param Device Pointer to NAND device instance + * @param Init Pointer to NAND Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Init->NandBank)); + assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature)); + assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FMC_ECC_STATE(Init->EccComputation)); + assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize)); + assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime)); + assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime)); + + /* NAND bank 3 registers configuration */ + MODIFY_REG(Device->PCR, PCR_CLEAR_MASK, (Init->Waitfeature | + FMC_PCR_MEMORY_TYPE_NAND | + Init->MemoryDataWidth | + Init->EccComputation | + Init->ECCPageSize | + ((Init->TCLRSetupTime) << FMC_PCR_TCLR_Pos) | + ((Init->TARSetupTime) << FMC_PCR_TAR_Pos))); + + return HAL_OK; +} + +/** + * @brief Initializes the FMC_NAND Common space Timing according to the specified + * parameters in the FMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to NAND device instance + * @param Timing Pointer to NAND timing structure + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, + FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + /* NAND bank 3 registers configuration */ + MODIFY_REG(Device->PMEM, PMEM_CLEAR_MASK, (Timing->SetupTime | + ((Timing->WaitSetupTime) << FMC_PMEM_MEMWAIT_Pos) | + ((Timing->HoldSetupTime) << FMC_PMEM_MEMHOLD_Pos) | + ((Timing->HiZSetupTime) << FMC_PMEM_MEMHIZ_Pos))); + + return HAL_OK; +} + +/** + * @brief Initializes the FMC_NAND Attribute space Timing according to the specified + * parameters in the FMC_NAND_PCC_TimingTypeDef + * @param Device Pointer to NAND device instance + * @param Timing Pointer to NAND timing structure + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, + FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); + assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); + assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); + assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + /* NAND bank 3 registers configuration */ + MODIFY_REG(Device->PATT, PATT_CLEAR_MASK, (Timing->SetupTime | + ((Timing->WaitSetupTime) << FMC_PATT_ATTWAIT_Pos) | + ((Timing->HoldSetupTime) << FMC_PATT_ATTHOLD_Pos) | + ((Timing->HiZSetupTime) << FMC_PATT_ATTHIZ_Pos))); + + return HAL_OK; +} + +/** + * @brief DeInitializes the FMC_NAND device + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Disable the NAND Bank */ + __FMC_NAND_DISABLE(Device, Bank); + + /* De-initialize the NAND Bank */ + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + /* Set the FMC_NAND_BANK3 registers to their reset values */ + WRITE_REG(Device->PCR, 0x00000018U); + WRITE_REG(Device->SR, 0x00000040U); + WRITE_REG(Device->PMEM, 0xFCFCFCFCU); + WRITE_REG(Device->PATT, 0xFCFCFCFCU); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_FMC_NAND_Group2 Peripheral Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### FMC_NAND Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FMC NAND interface. + +@endverbatim + * @{ + */ + + +/** + * @brief Enables dynamically FMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Enable ECC feature */ + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + SET_BIT(Device->PCR, FMC_PCR_ECCEN); + + return HAL_OK; +} + + +/** + * @brief Disables dynamically FMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param Bank NAND bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Disable ECC feature */ + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + CLEAR_BIT(Device->PCR, FMC_PCR_ECCEN); + + return HAL_OK; +} + +/** + * @brief Disables dynamically FMC_NAND ECC feature. + * @param Device Pointer to NAND device instance + * @param ECCval Pointer to ECC value + * @param Bank NAND bank number + * @param Timeout Timeout wait value + * @retval HAL status + */ +HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_FMC_NAND_DEVICE(Device)); + assert_param(IS_FMC_NAND_BANK(Bank)); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until FIFO is empty */ + while (__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(Bank); + + /* Get the ECCR register value */ + *ECCval = (uint32_t)Device->ECCR; + + return HAL_OK; +} + +/** + * @} + */ + + + +/** @defgroup FMC_LL_SDRAM + * @brief SDRAM Controller functions + * + @verbatim + ============================================================================== + ##### How to use SDRAM device driver ##### + ============================================================================== + [..] + This driver contains a set of APIs to interface with the FMC SDRAM banks in order + to run the SDRAM external devices. + + (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit() + (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init() + (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init() + (+) FMC SDRAM bank enable/disable write operation using the functions + FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable() + (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand() + +@endverbatim + * @{ + */ + +/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FMC SDRAM interface + (+) De-initialize the FMC SDRAM interface + (+) Configure the FMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the FMC_SDRAM device according to the specified + * control parameters in the FMC_SDRAM_InitTypeDef + * @param Device Pointer to SDRAM device instance + * @param Init Pointer to SDRAM Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Init->SDBank)); + assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber)); + assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber)); + assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber)); + assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency)); + assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection)); + assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod)); + assert_param(IS_FMC_READ_BURST(Init->ReadBurst)); + assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay)); + + /* Set SDRAM bank configuration parameters */ + if (Init->SDBank == FMC_SDRAM_BANK1) + { + MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK1], + SDCR_CLEAR_MASK, + (Init->ColumnBitsNumber | + Init->RowBitsNumber | + Init->MemoryDataWidth | + Init->InternalBankNumber | + Init->CASLatency | + Init->WriteProtection | + Init->SDClockPeriod | + Init->ReadBurst | + Init->ReadPipeDelay)); + } + else /* FMC_Bank2_SDRAM */ + { + MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK1], + FMC_SDCRx_SDCLK | + FMC_SDCRx_RBURST | + FMC_SDCRx_RPIPE, + (Init->SDClockPeriod | + Init->ReadBurst | + Init->ReadPipeDelay)); + + MODIFY_REG(Device->SDCR[FMC_SDRAM_BANK2], + SDCR_CLEAR_MASK, + (Init->ColumnBitsNumber | + Init->RowBitsNumber | + Init->MemoryDataWidth | + Init->InternalBankNumber | + Init->CASLatency | + Init->WriteProtection)); + } + + return HAL_OK; +} + + +/** + * @brief Initializes the FMC_SDRAM device timing according to the specified + * parameters in the FMC_SDRAM_TimingTypeDef + * @param Device Pointer to SDRAM device instance + * @param Timing Pointer to SDRAM Timing structure + * @param Bank SDRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, + FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay)); + assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay)); + assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime)); + assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay)); + assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime)); + assert_param(IS_FMC_RP_DELAY(Timing->RPDelay)); + assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* Set SDRAM device timing parameters */ + if (Bank == FMC_SDRAM_BANK1) + { + MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK1], + SDTR_CLEAR_MASK, + (((Timing->LoadToActiveDelay) - 1U) | + (((Timing->ExitSelfRefreshDelay) - 1U) << FMC_SDTRx_TXSR_Pos) | + (((Timing->SelfRefreshTime) - 1U) << FMC_SDTRx_TRAS_Pos) | + (((Timing->RowCycleDelay) - 1U) << FMC_SDTRx_TRC_Pos) | + (((Timing->WriteRecoveryTime) - 1U) << FMC_SDTRx_TWR_Pos) | + (((Timing->RPDelay) - 1U) << FMC_SDTRx_TRP_Pos) | + (((Timing->RCDDelay) - 1U) << FMC_SDTRx_TRCD_Pos))); + } + else /* FMC_Bank2_SDRAM */ + { + MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK1], + FMC_SDTRx_TRC | + FMC_SDTRx_TRP, + (((Timing->RowCycleDelay) - 1U) << FMC_SDTRx_TRC_Pos) | + (((Timing->RPDelay) - 1U) << FMC_SDTRx_TRP_Pos)); + + MODIFY_REG(Device->SDTR[FMC_SDRAM_BANK2], + SDTR_CLEAR_MASK, + (((Timing->LoadToActiveDelay) - 1U) | + (((Timing->ExitSelfRefreshDelay) - 1U) << FMC_SDTRx_TXSR_Pos) | + (((Timing->SelfRefreshTime) - 1U) << FMC_SDTRx_TRAS_Pos) | + (((Timing->WriteRecoveryTime) - 1U) << FMC_SDTRx_TWR_Pos) | + (((Timing->RCDDelay) - 1U) << FMC_SDTRx_TRCD_Pos))); + } + + return HAL_OK; +} + +/** + * @brief DeInitializes the FMC_SDRAM peripheral + * @param Device Pointer to SDRAM device instance + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* De-initialize the SDRAM device */ + Device->SDCR[Bank] = 0x000002D0U; + Device->SDTR[Bank] = 0x0FFFFFFFU; + Device->SDCMR = 0x00000000U; + Device->SDRTR = 0x00000000U; + Device->SDSR = 0x00000000U; + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2 + * @brief management functions + * +@verbatim + ============================================================================== + ##### FMC_SDRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FMC SDRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FMC_SDRAM write protection. + * @param Device Pointer to SDRAM device instance + * @param Bank SDRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* Enable write protection */ + SET_BIT(Device->SDCR[Bank], FMC_SDRAM_WRITE_PROTECTION_ENABLE); + + return HAL_OK; +} + +/** + * @brief Disables dynamically FMC_SDRAM write protection. + * @param hsdram FMC_SDRAM handle + * @retval HAL status + */ +HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* Disable write protection */ + CLEAR_BIT(Device->SDCR[Bank], FMC_SDRAM_WRITE_PROTECTION_ENABLE); + + return HAL_OK; +} + +/** + * @brief Send Command to the FMC SDRAM bank + * @param Device Pointer to SDRAM device instance + * @param Command Pointer to SDRAM command structure + * @param Timing Pointer to SDRAM Timing structure + * @param Timeout Timeout wait value + * @retval HAL state + */ +HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, + FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode)); + assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget)); + assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber)); + assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition)); + + /* Set command register */ + MODIFY_REG(Device->SDCMR, (FMC_SDCMR_MODE | FMC_SDCMR_CTB2 | FMC_SDCMR_CTB1 | FMC_SDCMR_NRFS | FMC_SDCMR_MRD), + ((Command->CommandMode) | (Command->CommandTarget) | + (((Command->AutoRefreshNumber) - 1U) << FMC_SDCMR_NRFS_Pos) | + ((Command->ModeRegisterDefinition) << FMC_SDCMR_MRD_Pos))); + /* Prevent unused argument(s) compilation warning */ + UNUSED(Timeout); + return HAL_OK; +} + +/** + * @brief Program the SDRAM Memory Refresh rate. + * @param Device Pointer to SDRAM device instance + * @param RefreshRate The SDRAM refresh rate value. + * @retval HAL state + */ +HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_REFRESH_RATE(RefreshRate)); + + /* Set the refresh rate in command register */ + MODIFY_REG(Device->SDRTR, FMC_SDRTR_COUNT, (RefreshRate << FMC_SDRTR_COUNT_Pos)); + + return HAL_OK; +} + +/** + * @brief Set the Number of consecutive SDRAM Memory auto Refresh commands. + * @param Device Pointer to SDRAM device instance + * @param AutoRefreshNumber Specifies the auto Refresh number. + * @retval None + */ +HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, + uint32_t AutoRefreshNumber) +{ + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber)); + + /* Set the Auto-refresh number in command register */ + MODIFY_REG(Device->SDCMR, FMC_SDCMR_NRFS, ((AutoRefreshNumber - 1U) << FMC_SDCMR_NRFS_Pos)); + + return HAL_OK; +} + +/** + * @brief Returns the indicated FMC SDRAM bank mode status. + * @param Device Pointer to SDRAM device instance + * @param Bank Defines the FMC SDRAM bank. This parameter can be + * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM. + * @retval The FMC SDRAM bank mode status, could be on of the following values: + * FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or + * FMC_SDRAM_POWER_DOWN_MODE. + */ +uint32_t FMC_SDRAM_GetModeStatus(const FMC_SDRAM_TypeDef *Device, uint32_t Bank) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_FMC_SDRAM_DEVICE(Device)); + assert_param(IS_FMC_SDRAM_BANK(Bank)); + + /* Get the corresponding bank mode */ + if (Bank == FMC_SDRAM_BANK1) + { + tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1); + } + else + { + tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2U); + } + + /* Return the mode status */ + return tmpreg; +} + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_NOR_MODULE_ENABLED */ +/** + * @} + */ +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_sdmmc.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_sdmmc.c new file mode 100644 index 0000000..38e7697 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_sdmmc.c @@ -0,0 +1,1644 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_sdmmc.c + * @author MCD Application Team + * @brief SDMMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the SDMMC peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### SDMMC peripheral features ##### + ============================================================================== + [..] The SD/SDMMC MMC card host interface (SDMMC) provides an interface between the AHB + peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDMMC cards and CE-ATA + devices. + + [..] The SDMMC features include the following: + (+) Full compliance with MultiMediaCard System Specification Version 4.51. Card support + for three different databus modes: 1-bit (default), 4-bit and 8-bit. + (+) Full compatibility with previous versions of MultiMediaCards (backward compatibility). + (+) Full compliance with SD memory card specifications version 4.1. + (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and + UHS-II mode not supported). + (+) Full compliance with SDIO card specification version 4.0. Card support + for two different databus modes: 1-bit (default) and 4-bit. + (SDR104 SDMMC_CK speed limited to maximum allowed IO speed, SPI mode and + UHS-II mode not supported). + (+) Data transfer up to 208 Mbyte/s for the 8 bit mode. (depending maximum allowed IO speed). + (+) Data and command output enable signals to control external bidirectional drivers + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver is a considered as a driver of service for external devices drivers + that interfaces with the SDMMC peripheral. + According to the device used (SD card/ MMC card / SDMMC card ...), a set of APIs + is used in the device's driver to perform SDMMC operations and functionalities. + + This driver is almost transparent for the final user, it is only used to implement other + functionalities of the external device. + + [..] + (+) The SDMMC clock is coming from output of PLL1_Q or PLL2_R. + Before start working with SDMMC peripheral make sure that the PLL is well configured. + The SDMMC peripheral uses two clock signals: + (++) PLL1_Q bus clock (default after reset) + (++) PLL2_R bus clock + + (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDMMC + peripheral. + + (+) Enable the Power ON State using the SDMMC_PowerState_ON(SDMMCx) + function and disable it using the function SDMMC_PowerState_OFF(SDMMCx). + + (+) Enable/Disable the peripheral interrupts using the macros __SDMMC_ENABLE_IT(hSDMMC, IT) + and __SDMMC_DISABLE_IT(hSDMMC, IT) if you need to use interrupt mode. + + (+) When using the DMA mode + (++) Configure the IDMA mode (Single buffer or double) + (++) Configure the buffer address + (++) Configure Data Path State Machine + + (+) To control the CPSM (Command Path State Machine) and send + commands to the card use the SDMMC_SendCommand(SDMMCx), + SDMMC_GetCommandResponse() and SDMMC_GetResponse() functions. First, user has + to fill the command structure (pointer to SDMMC_CmdInitTypeDef) according + to the selected command to be sent. + The parameters that should be filled are: + (++) Command Argument + (++) Command Index + (++) Command Response type + (++) Command Wait + (++) CPSM Status (Enable or Disable). + + -@@- To check if the command is well received, read the SDMMC_CMDRESP + register using the SDMMC_GetCommandResponse(). + The SDMMC responses registers (SDMMC_RESP1 to SDMMC_RESP2), use the + SDMMC_GetResponse() function. + + (+) To control the DPSM (Data Path State Machine) and send/receive + data to/from the card use the SDMMC_DataConfig(), SDMMC_GetDataCounter(), + SDMMC_ReadFIFO(), SDMMC_WriteFIFO() and SDMMC_GetFIFOCount() functions. + + *** Read Operations *** + ======================= + [..] + (#) First, user has to fill the data structure (pointer to + SDMMC_DataInitTypeDef) according to the selected data type to be received. + The parameters that should be filled are: + (++) Data TimeOut + (++) Data Length + (++) Data Block size + (++) Data Transfer direction: should be from card (To SDMMC) + (++) Data Transfer mode + (++) DPSM Status (Enable or Disable) + + (#) Configure the SDMMC resources to receive the data from the card + according to selected transfer mode (Refer to Step 8, 9 and 10). + + (#) Send the selected Read command (refer to step 11). + + (#) Use the SDMMC flags/interrupts to check the transfer status. + + *** Write Operations *** + ======================== + [..] + (#) First, user has to fill the data structure (pointer to + SDMMC_DataInitTypeDef) according to the selected data type to be received. + The parameters that should be filled are: + (++) Data TimeOut + (++) Data Length + (++) Data Block size + (++) Data Transfer direction: should be to card (To CARD) + (++) Data Transfer mode + (++) DPSM Status (Enable or Disable) + + (#) Configure the SDMMC resources to send the data to the card according to + selected transfer mode. + + (#) Send the selected Write command. + + (#) Use the SDMMC flags/interrupts to check the transfer status. + + *** Command management operations *** + ===================================== + [..] + (#) The commands used for Read/Write/Erase operations are managed in + separate functions. + Each function allows to send the needed command with the related argument, + then check the response. + By the same approach, you could implement a command and check the response. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup SDMMC_LL SDMMC Low Layer + * @brief Low layer module for SD + * @{ + */ + +#if defined (HAL_SD_MODULE_ENABLED) || defined (HAL_MMC_MODULE_ENABLED) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static uint32_t SDMMC_GetCmdError(SDMMC_TypeDef *SDMMCx); + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SDMMC_LL_Exported_Functions SDMMC Low Layer Exported Functions + * @{ + */ + +/** @defgroup HAL_SDMMC_LL_Group1 Initialization de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the SDMMC according to the specified + * parameters in the SDMMC_InitTypeDef and create the associated handle. + * @param SDMMCx: Pointer to SDMMC register base + * @param Init: SDMMC initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_Init(SDMMC_TypeDef *SDMMCx, SDMMC_InitTypeDef Init) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDMMC_ALL_INSTANCE(SDMMCx)); + assert_param(IS_SDMMC_CLOCK_EDGE(Init.ClockEdge)); + assert_param(IS_SDMMC_CLOCK_POWER_SAVE(Init.ClockPowerSave)); + assert_param(IS_SDMMC_BUS_WIDE(Init.BusWide)); + assert_param(IS_SDMMC_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl)); + assert_param(IS_SDMMC_CLKDIV(Init.ClockDiv)); + + /* Set SDMMC configuration parameters */ + tmpreg |= (Init.ClockEdge | \ + Init.ClockPowerSave | \ + Init.BusWide | \ + Init.HardwareFlowControl | \ + Init.ClockDiv + ); + + /* Write to SDMMC CLKCR */ + MODIFY_REG(SDMMCx->CLKCR, CLKCR_CLEAR_MASK, tmpreg); + + return HAL_OK; +} + + +/** + * @} + */ + +/** @defgroup HAL_SDMMC_LL_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### I/O operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SDMMC data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Read data (word) from Rx FIFO in blocking mode (polling) + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_ReadFIFO(SDMMC_TypeDef *SDMMCx) +{ + /* Read data from Rx FIFO */ + return (SDMMCx->FIFO); +} + +/** + * @brief Write data (word) to Tx FIFO in blocking mode (polling) + * @param SDMMCx: Pointer to SDMMC register base + * @param pWriteData: pointer to data to write + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_WriteFIFO(SDMMC_TypeDef *SDMMCx, uint32_t *pWriteData) +{ + /* Write data to FIFO */ + SDMMCx->FIFO = *pWriteData; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SDMMC data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Set SDMMC Power state to ON. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_PowerState_ON(SDMMC_TypeDef *SDMMCx) +{ + /* Set power state to ON */ + SDMMCx->POWER |= SDMMC_POWER_PWRCTRL; + + return HAL_OK; +} + +/** + * @brief Set SDMMC Power state to Power-Cycle. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_PowerState_Cycle(SDMMC_TypeDef *SDMMCx) +{ + /* Set power state to Power Cycle*/ + SDMMCx->POWER |= SDMMC_POWER_PWRCTRL_1; + + return HAL_OK; +} + +/** + * @brief Set SDMMC Power state to OFF. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_PowerState_OFF(SDMMC_TypeDef *SDMMCx) +{ + /* Set power state to OFF */ + SDMMCx->POWER &= ~(SDMMC_POWER_PWRCTRL); + + return HAL_OK; +} + +/** + * @brief Get SDMMC Power state. + * @param SDMMCx: Pointer to SDMMC register base + * @retval Power status of the controller. The returned value can be one of the + * following values: + * - 0x00: Power OFF + * - 0x02: Power UP + * - 0x03: Power ON + */ +uint32_t SDMMC_GetPowerState(SDMMC_TypeDef *SDMMCx) +{ + return (SDMMCx->POWER & SDMMC_POWER_PWRCTRL); +} + +/** + * @brief Configure the SDMMC command path according to the specified parameters in + * SDMMC_CmdInitTypeDef structure and send the command + * @param SDMMCx: Pointer to SDMMC register base + * @param Command: pointer to a SDMMC_CmdInitTypeDef structure that contains + * the configuration information for the SDMMC command + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_SendCommand(SDMMC_TypeDef *SDMMCx, SDMMC_CmdInitTypeDef *Command) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDMMC_CMD_INDEX(Command->CmdIndex)); + assert_param(IS_SDMMC_RESPONSE(Command->Response)); + assert_param(IS_SDMMC_WAIT(Command->WaitForInterrupt)); + assert_param(IS_SDMMC_CPSM(Command->CPSM)); + + /* Set the SDMMC Argument value */ + SDMMCx->ARG = Command->Argument; + + /* Set SDMMC command parameters */ + tmpreg |= (uint32_t)(Command->CmdIndex | \ + Command->Response | \ + Command->WaitForInterrupt | \ + Command->CPSM); + + /* Write to SDMMC CMD register */ + MODIFY_REG(SDMMCx->CMD, CMD_CLEAR_MASK, tmpreg); + + return HAL_OK; +} + +/** + * @brief Return the command index of last command for which response received + * @param SDMMCx: Pointer to SDMMC register base + * @retval Command index of the last command response received + */ +uint8_t SDMMC_GetCommandResponse(SDMMC_TypeDef *SDMMCx) +{ + return (uint8_t)(SDMMCx->RESPCMD); +} + + +/** + * @brief Return the response received from the card for the last command + * @param SDMMCx: Pointer to SDMMC register base + * @param Response: Specifies the SDMMC response register. + * This parameter can be one of the following values: + * @arg SDMMC_RESP1: Response Register 1 + * @arg SDMMC_RESP2: Response Register 2 + * @arg SDMMC_RESP3: Response Register 3 + * @arg SDMMC_RESP4: Response Register 4 + * @retval The Corresponding response register value + */ +uint32_t SDMMC_GetResponse(SDMMC_TypeDef *SDMMCx, uint32_t Response) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SDMMC_RESP(Response)); + + /* Get the response */ + tmp = (uint32_t)(&(SDMMCx->RESP1)) + Response; + + return (*(__IO uint32_t *) tmp); +} + +/** + * @brief Configure the SDMMC data path according to the specified + * parameters in the SDMMC_DataInitTypeDef. + * @param SDMMCx: Pointer to SDMMC register base + * @param Data : pointer to a SDMMC_DataInitTypeDef structure + * that contains the configuration information for the SDMMC data. + * @retval HAL status + */ +HAL_StatusTypeDef SDMMC_ConfigData(SDMMC_TypeDef *SDMMCx, SDMMC_DataInitTypeDef *Data) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDMMC_DATA_LENGTH(Data->DataLength)); + assert_param(IS_SDMMC_BLOCK_SIZE(Data->DataBlockSize)); + assert_param(IS_SDMMC_TRANSFER_DIR(Data->TransferDir)); + assert_param(IS_SDMMC_TRANSFER_MODE(Data->TransferMode)); + assert_param(IS_SDMMC_DPSM(Data->DPSM)); + + /* Set the SDMMC Data TimeOut value */ + SDMMCx->DTIMER = Data->DataTimeOut; + + /* Set the SDMMC DataLength value */ + SDMMCx->DLEN = Data->DataLength; + + /* Set the SDMMC data configuration parameters */ + tmpreg |= (uint32_t)(Data->DataBlockSize | \ + Data->TransferDir | \ + Data->TransferMode | \ + Data->DPSM); + + /* Write to SDMMC DCTRL */ + MODIFY_REG(SDMMCx->DCTRL, DCTRL_CLEAR_MASK, tmpreg); + + return HAL_OK; + +} + +/** + * @brief Returns number of remaining data bytes to be transferred. + * @param SDMMCx: Pointer to SDMMC register base + * @retval Number of remaining data bytes to be transferred + */ +uint32_t SDMMC_GetDataCounter(SDMMC_TypeDef *SDMMCx) +{ + return (SDMMCx->DCOUNT); +} + +/** + * @brief Get the FIFO data + * @param SDMMCx: Pointer to SDMMC register base + * @retval Data received + */ +uint32_t SDMMC_GetFIFOCount(SDMMC_TypeDef *SDMMCx) +{ + return (SDMMCx->FIFO); +} + +/** + * @brief Sets one of the two options of inserting read wait interval. + * @param SDMMCx: Pointer to SDMMC register base + * @param SDMMC_ReadWaitMode: SDMMC Read Wait operation mode. + * This parameter can be: + * @arg SDMMC_READ_WAIT_MODE_CLK: Read Wait control by stopping SDMMCCLK + * @arg SDMMC_READ_WAIT_MODE_DATA2: Read Wait control using SDMMC_DATA2 + * @retval None + */ +HAL_StatusTypeDef SDMMC_SetSDMMCReadWaitMode(SDMMC_TypeDef *SDMMCx, uint32_t SDMMC_ReadWaitMode) +{ + /* Check the parameters */ + assert_param(IS_SDMMC_READWAIT_MODE(SDMMC_ReadWaitMode)); + + /* Set SDMMC read wait mode */ + MODIFY_REG(SDMMCx->DCTRL, SDMMC_DCTRL_RWMOD, SDMMC_ReadWaitMode); + + return HAL_OK; +} + +/** + * @} + */ + + +/** @defgroup HAL_SDMMC_LL_Group4 Command management functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### Commands management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the needed commands. + +@endverbatim + * @{ + */ + +/** + * @brief Send the Data Block Length command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdBlockLength(SDMMC_TypeDef *SDMMCx, uint32_t BlockSize) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)BlockSize; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_BLOCKLEN; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SET_BLOCKLEN, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Read Single Block command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdReadSingleBlock(SDMMC_TypeDef *SDMMCx, uint32_t ReadAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)ReadAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_READ_SINGLE_BLOCK; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_READ_SINGLE_BLOCK, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Read Multi Block command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdReadMultiBlock(SDMMC_TypeDef *SDMMCx, uint32_t ReadAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)ReadAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_READ_MULT_BLOCK; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_READ_MULT_BLOCK, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Write Single Block command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdWriteSingleBlock(SDMMC_TypeDef *SDMMCx, uint32_t WriteAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)WriteAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_WRITE_SINGLE_BLOCK; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_WRITE_SINGLE_BLOCK, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Write Multi Block command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdWriteMultiBlock(SDMMC_TypeDef *SDMMCx, uint32_t WriteAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)WriteAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_WRITE_MULT_BLOCK; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_WRITE_MULT_BLOCK, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Start Address Erase command for SD and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSDEraseStartAdd(SDMMC_TypeDef *SDMMCx, uint32_t StartAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)StartAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_ERASE_GRP_START; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SD_ERASE_GRP_START, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the End Address Erase command for SD and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSDEraseEndAdd(SDMMC_TypeDef *SDMMCx, uint32_t EndAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)EndAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_ERASE_GRP_END; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SD_ERASE_GRP_END, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Start Address Erase command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdEraseStartAdd(SDMMC_TypeDef *SDMMCx, uint32_t StartAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)StartAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE_GRP_START; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_ERASE_GRP_START, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the End Address Erase command and check the response + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdEraseEndAdd(SDMMC_TypeDef *SDMMCx, uint32_t EndAdd) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = (uint32_t)EndAdd; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE_GRP_END; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_ERASE_GRP_END, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Erase command and check the response + * @param SDMMCx Pointer to SDMMC register base + * @param EraseType Type of erase to be performed + * @retval HAL status + */ +uint32_t SDMMC_CmdErase(SDMMC_TypeDef *SDMMCx, uint32_t EraseType) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Set Block Size for Card */ + sdmmc_cmdinit.Argument = EraseType; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_ERASE, SDMMC_MAXERASETIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Stop Transfer command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdStopTransfer(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD12 STOP_TRANSMISSION */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_STOP_TRANSMISSION; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + + __SDMMC_CMDSTOP_ENABLE(SDMMCx); + __SDMMC_CMDTRANS_DISABLE(SDMMCx); + + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_STOP_TRANSMISSION, SDMMC_STOPTRANSFERTIMEOUT); + + __SDMMC_CMDSTOP_DISABLE(SDMMCx); + + /* Ignore Address Out Of Range Error, Not relevant at end of memory */ + if (errorstate == SDMMC_ERROR_ADDR_OUT_OF_RANGE) + { + errorstate = SDMMC_ERROR_NONE; + } + + return errorstate; +} + +/** + * @brief Send the Select Deselect command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param addr: Address of the card to be selected + * @retval HAL status + */ +uint32_t SDMMC_CmdSelDesel(SDMMC_TypeDef *SDMMCx, uint32_t Addr) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD7 SDMMC_SEL_DESEL_CARD */ + sdmmc_cmdinit.Argument = (uint32_t)Addr; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEL_DESEL_CARD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SEL_DESEL_CARD, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Go Idle State command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdGoIdleState(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_GO_IDLE_STATE; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_NO; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdError(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Operating Condition command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdOperCond(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD8 to verify SD card interface operating condition */ + /* Argument: - [31:12]: Reserved (shall be set to '0') + - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) + - [7:0]: Check Pattern (recommended 0xAA) */ + /* CMD Response: R7 */ + sdmmc_cmdinit.Argument = SDMMC_CHECK_PATTERN; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp7(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Application command to verify that that the next command + * is an application specific com-mand rather than a standard command + * and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdAppCommand(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = (uint32_t)Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_APP_CMD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + /* If there is a HAL_ERROR, it is a MMC card, else + it is a SD card: SD card 2.0 (voltage range mismatch) + or SD card 1.x */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_APP_CMD, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the command asking the accessed card to send its operating + * condition register (OCR) + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdAppOperCommand(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_OP_COND; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp3(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Bus Width command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param BusWidth: BusWidth + * @retval HAL status + */ +uint32_t SDMMC_CmdBusWidth(SDMMC_TypeDef *SDMMCx, uint32_t BusWidth) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = (uint32_t)BusWidth; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_APP_SD_SET_BUSWIDTH; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_APP_SD_SET_BUSWIDTH, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Send SCR command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSendSCR(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD51 SD_APP_SEND_SCR */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_SEND_SCR; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SD_APP_SEND_SCR, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Send CID command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdSendCID(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD2 ALL_SEND_CID */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ALL_SEND_CID; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_LONG; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp2(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Send CSD command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdSendCSD(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD9 SEND_CSD */ + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_CSD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_LONG; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp2(SDMMCx); + + return errorstate; +} + +/** + * @brief Send the Send CSD command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param pRCA: Card RCA + * @retval HAL status + */ +uint32_t SDMMC_CmdSetRelAdd(SDMMC_TypeDef *SDMMCx, uint16_t *pRCA) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD3 SD_CMD_SET_REL_ADDR */ + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_REL_ADDR; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp6(SDMMCx, SDMMC_CMD_SET_REL_ADDR, pRCA); + + return errorstate; +} + +/** + * @brief Send the Set Relative Address command to MMC card (not SD card). + * @param SDMMCx Pointer to SDMMC register base + * @param RCA Card RCA + * @retval HAL status + */ +uint32_t SDMMC_CmdSetRelAddMmc(SDMMC_TypeDef *SDMMCx, uint16_t RCA) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD3 SD_CMD_SET_REL_ADDR */ + sdmmc_cmdinit.Argument = ((uint32_t)RCA << 16U); + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_REL_ADDR; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SET_REL_ADDR, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Sleep command to MMC card (not SD card). + * @param SDMMCx Pointer to SDMMC register base + * @param Argument Argument of the command (RCA and Sleep/Awake) + * @retval HAL status + */ +uint32_t SDMMC_CmdSleepMmc(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD5 SDMMC_CMD_MMC_SLEEP_AWAKE */ + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_MMC_SLEEP_AWAKE; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_MMC_SLEEP_AWAKE, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Status command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdSendStatus(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_STATUS; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SEND_STATUS, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Status register command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @retval HAL status + */ +uint32_t SDMMC_CmdStatusRegister(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = 0U; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_STATUS; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_SD_APP_STATUS, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Sends host capacity support information and activates the card's + * initialization process. Send SDMMC_CMD_SEND_OP_COND command + * @param SDMMCx: Pointer to SDMMC register base + * @parame Argument: Argument used for the command + * @retval HAL status + */ +uint32_t SDMMC_CmdOpCondition(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_OP_COND; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp3(SDMMCx); + + return errorstate; +} + +/** + * @brief Checks switchable function and switch card function. SDMMC_CMD_HS_SWITCH command + * @param SDMMCx: Pointer to SDMMC register base + * @parame Argument: Argument used for the command + * @retval HAL status + */ +uint32_t SDMMC_CmdSwitch(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD6 to activate SDR50 Mode and Power Limit 1.44W */ + /* CMD Response: R1 */ + sdmmc_cmdinit.Argument = Argument; /* SDMMC_SDR25_SWITCH_PATTERN*/ + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SWITCH; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_HS_SWITCH, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the command asking the accessed card to send its operating + * condition register (OCR) + * @param None + * @retval HAL status + */ +uint32_t SDMMC_CmdVoltageSwitch(SDMMC_TypeDef *SDMMCx) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + sdmmc_cmdinit.Argument = 0x00000000; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_VOLTAGE_SWITCH; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_VOLTAGE_SWITCH, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @brief Send the Send EXT_CSD command and check the response. + * @param SDMMCx: Pointer to SDMMC register base + * @param Argument: Command Argument + * @retval HAL status + */ +uint32_t SDMMC_CmdSendEXTCSD(SDMMC_TypeDef *SDMMCx, uint32_t Argument) +{ + SDMMC_CmdInitTypeDef sdmmc_cmdinit; + uint32_t errorstate; + + /* Send CMD9 SEND_CSD */ + sdmmc_cmdinit.Argument = Argument; + sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD; + sdmmc_cmdinit.Response = SDMMC_RESPONSE_SHORT; + sdmmc_cmdinit.WaitForInterrupt = SDMMC_WAIT_NO; + sdmmc_cmdinit.CPSM = SDMMC_CPSM_ENABLE; + (void)SDMMC_SendCommand(SDMMCx, &sdmmc_cmdinit); + + /* Check for error conditions */ + errorstate = SDMMC_GetCmdResp1(SDMMCx, SDMMC_CMD_HS_SEND_EXT_CSD, SDMMC_CMDTIMEOUT); + + return errorstate; +} + +/** + * @} + */ + + +/** @defgroup HAL_SDMMC_LL_Group5 Responses management functions + * @brief Responses functions + * +@verbatim + =============================================================================== + ##### Responses management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the needed responses. + +@endverbatim + * @{ + */ +/** + * @brief Checks for error conditions for R1 response. + * @param hsd: SD handle + * @param SD_CMD: The sent command index + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp1(SDMMC_TypeDef *SDMMCx, uint8_t SD_CMD, uint32_t Timeout) +{ + uint32_t response_r1; + uint32_t sta_reg; + + /* 8 is the number of required instructions cycles for the below loop statement. + The Timeout is expressed in ms */ + uint32_t count = Timeout * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT | + SDMMC_FLAG_BUSYD0END)) == 0U) || ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* Nothing to do */ + } + + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + + /* Check response received is of desired command */ + if (SDMMC_GetCommandResponse(SDMMCx) != SD_CMD) + { + return SDMMC_ERROR_CMD_CRC_FAIL; + } + + /* We have received response, retrieve it for analysis */ + response_r1 = SDMMC_GetResponse(SDMMCx, SDMMC_RESP1); + + if ((response_r1 & SDMMC_OCR_ERRORBITS) == SDMMC_ALLZERO) + { + return SDMMC_ERROR_NONE; + } + else if ((response_r1 & SDMMC_OCR_ADDR_OUT_OF_RANGE) == SDMMC_OCR_ADDR_OUT_OF_RANGE) + { + return SDMMC_ERROR_ADDR_OUT_OF_RANGE; + } + else if ((response_r1 & SDMMC_OCR_ADDR_MISALIGNED) == SDMMC_OCR_ADDR_MISALIGNED) + { + return SDMMC_ERROR_ADDR_MISALIGNED; + } + else if ((response_r1 & SDMMC_OCR_BLOCK_LEN_ERR) == SDMMC_OCR_BLOCK_LEN_ERR) + { + return SDMMC_ERROR_BLOCK_LEN_ERR; + } + else if ((response_r1 & SDMMC_OCR_ERASE_SEQ_ERR) == SDMMC_OCR_ERASE_SEQ_ERR) + { + return SDMMC_ERROR_ERASE_SEQ_ERR; + } + else if ((response_r1 & SDMMC_OCR_BAD_ERASE_PARAM) == SDMMC_OCR_BAD_ERASE_PARAM) + { + return SDMMC_ERROR_BAD_ERASE_PARAM; + } + else if ((response_r1 & SDMMC_OCR_WRITE_PROT_VIOLATION) == SDMMC_OCR_WRITE_PROT_VIOLATION) + { + return SDMMC_ERROR_WRITE_PROT_VIOLATION; + } + else if ((response_r1 & SDMMC_OCR_LOCK_UNLOCK_FAILED) == SDMMC_OCR_LOCK_UNLOCK_FAILED) + { + return SDMMC_ERROR_LOCK_UNLOCK_FAILED; + } + else if ((response_r1 & SDMMC_OCR_COM_CRC_FAILED) == SDMMC_OCR_COM_CRC_FAILED) + { + return SDMMC_ERROR_COM_CRC_FAILED; + } + else if ((response_r1 & SDMMC_OCR_ILLEGAL_CMD) == SDMMC_OCR_ILLEGAL_CMD) + { + return SDMMC_ERROR_ILLEGAL_CMD; + } + else if ((response_r1 & SDMMC_OCR_CARD_ECC_FAILED) == SDMMC_OCR_CARD_ECC_FAILED) + { + return SDMMC_ERROR_CARD_ECC_FAILED; + } + else if ((response_r1 & SDMMC_OCR_CC_ERROR) == SDMMC_OCR_CC_ERROR) + { + return SDMMC_ERROR_CC_ERR; + } + else if ((response_r1 & SDMMC_OCR_STREAM_READ_UNDERRUN) == SDMMC_OCR_STREAM_READ_UNDERRUN) + { + return SDMMC_ERROR_STREAM_READ_UNDERRUN; + } + else if ((response_r1 & SDMMC_OCR_STREAM_WRITE_OVERRUN) == SDMMC_OCR_STREAM_WRITE_OVERRUN) + { + return SDMMC_ERROR_STREAM_WRITE_OVERRUN; + } + else if ((response_r1 & SDMMC_OCR_CID_CSD_OVERWRITE) == SDMMC_OCR_CID_CSD_OVERWRITE) + { + return SDMMC_ERROR_CID_CSD_OVERWRITE; + } + else if ((response_r1 & SDMMC_OCR_WP_ERASE_SKIP) == SDMMC_OCR_WP_ERASE_SKIP) + { + return SDMMC_ERROR_WP_ERASE_SKIP; + } + else if ((response_r1 & SDMMC_OCR_CARD_ECC_DISABLED) == SDMMC_OCR_CARD_ECC_DISABLED) + { + return SDMMC_ERROR_CARD_ECC_DISABLED; + } + else if ((response_r1 & SDMMC_OCR_ERASE_RESET) == SDMMC_OCR_ERASE_RESET) + { + return SDMMC_ERROR_ERASE_RESET; + } + else if ((response_r1 & SDMMC_OCR_AKE_SEQ_ERROR) == SDMMC_OCR_AKE_SEQ_ERROR) + { + return SDMMC_ERROR_AKE_SEQ_ERR; + } + else + { + return SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } +} + +/** + * @brief Checks for error conditions for R2 (CID or CSD) response. + * @param hsd: SD handle + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp2(SDMMC_TypeDef *SDMMCx) +{ + uint32_t sta_reg; + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT)) == 0U) || + ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* No error flag set */ + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + } + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Checks for error conditions for R3 (OCR) response. + * @param hsd: SD handle + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp3(SDMMC_TypeDef *SDMMCx) +{ + uint32_t sta_reg; + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT)) == 0U) || + ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else + { + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + } + + return SDMMC_ERROR_NONE; +} + +/** + * @brief Checks for error conditions for R6 (RCA) response. + * @param hsd: SD handle + * @param SD_CMD: The sent command index + * @param pRCA: Pointer to the variable that will contain the SD card relative + * address RCA + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp6(SDMMC_TypeDef *SDMMCx, uint8_t SD_CMD, uint16_t *pRCA) +{ + uint32_t response_r1; + uint32_t sta_reg; + + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT)) == 0U) || + ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + else if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL)) + { + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* Nothing to do */ + } + + /* Check response received is of desired command */ + if (SDMMC_GetCommandResponse(SDMMCx) != SD_CMD) + { + return SDMMC_ERROR_CMD_CRC_FAIL; + } + + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + + /* We have received response, retrieve it. */ + response_r1 = SDMMC_GetResponse(SDMMCx, SDMMC_RESP1); + + if ((response_r1 & (SDMMC_R6_GENERAL_UNKNOWN_ERROR | SDMMC_R6_ILLEGAL_CMD | + SDMMC_R6_COM_CRC_FAILED)) == SDMMC_ALLZERO) + { + *pRCA = (uint16_t)(response_r1 >> 16); + + return SDMMC_ERROR_NONE; + } + else if ((response_r1 & SDMMC_R6_ILLEGAL_CMD) == SDMMC_R6_ILLEGAL_CMD) + { + return SDMMC_ERROR_ILLEGAL_CMD; + } + else if ((response_r1 & SDMMC_R6_COM_CRC_FAILED) == SDMMC_R6_COM_CRC_FAILED) + { + return SDMMC_ERROR_COM_CRC_FAILED; + } + else + { + return SDMMC_ERROR_GENERAL_UNKNOWN_ERR; + } +} + +/** + * @brief Checks for error conditions for R7 response. + * @param hsd: SD handle + * @retval SD Card error state + */ +uint32_t SDMMC_GetCmdResp7(SDMMC_TypeDef *SDMMCx) +{ + uint32_t sta_reg; + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + sta_reg = SDMMCx->STA; + } while (((sta_reg & (SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT)) == 0U) || + ((sta_reg & SDMMC_FLAG_CMDACT) != 0U)); + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT)) + { + /* Card is not SD V2.0 compliant */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CTIMEOUT); + + return SDMMC_ERROR_CMD_RSP_TIMEOUT; + } + + else if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL)) + { + /* Card is not SD V2.0 compliant */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CCRCFAIL); + + return SDMMC_ERROR_CMD_CRC_FAIL; + } + else + { + /* Nothing to do */ + } + + if (__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CMDREND)) + { + /* Card is SD V2.0 compliant */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_FLAG_CMDREND); + } + + return SDMMC_ERROR_NONE; + +} + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup SD_Private_Functions + * @{ + */ + +/** + * @brief Checks for error conditions for CMD0. + * @param hsd: SD handle + * @retval SD Card error state + */ +static uint32_t SDMMC_GetCmdError(SDMMC_TypeDef *SDMMCx) +{ + /* 8 is the number of required instructions cycles for the below loop statement. + The SDMMC_CMDTIMEOUT is expressed in ms */ + uint32_t count = SDMMC_CMDTIMEOUT * (SystemCoreClock / 8U / 1000U); + + do + { + if (count-- == 0U) + { + return SDMMC_ERROR_TIMEOUT; + } + + } while (!__SDMMC_GET_FLAG(SDMMCx, SDMMC_FLAG_CMDSENT)); + + /* Clear all the static flags */ + __SDMMC_CLEAR_FLAG(SDMMCx, SDMMC_STATIC_CMD_FLAGS); + + return SDMMC_ERROR_NONE; +} + +/** + * @} + */ + +#endif /* HAL_SD_MODULE_ENABLED || HAL_MMC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_usb.c b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_usb.c new file mode 100644 index 0000000..ed2ca0f --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_usb.c @@ -0,0 +1,2257 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_usb.c + * @author MCD Application Team + * @brief USB Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Fill parameters of Init structure in USB_CfgTypeDef structure. + + (#) Call USB_CoreInit() API to initialize the USB Core peripheral. + + (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. + + @endverbatim + + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_LL_USB_DRIVER + * @{ + */ + +#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +#if defined (USB_OTG_FS) || defined (USB_OTG_HS) +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + +/** @defgroup USB_LL_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization/de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the USB Core + * @param USBx USB Instance + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret; + if (cfg.phy_itface == USB_OTG_ULPI_PHY) + { + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + + /* Init The ULPI Interface */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL); + + /* Select vbus source */ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); + if (cfg.use_external_vbus == 1U) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD; + } + + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + } + else /* FS interface (embedded Phy) */ + { + /* Select FS Embedded PHY */ + USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; + + /* Reset after a PHY select */ + ret = USB_CoreReset(USBx); + + if (cfg.battery_charging_enable == 0U) + { + /* Activate the USB Transceiver */ + USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN; + } + else + { + /* Deactivate the USB Transceiver */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN); + } + } + + if (cfg.dma_enable == 1U) + { + /* make sure to reserve 18 fifo Locations for DMA buffers */ + USBx->GDFIFOCFG &= ~(0xFFFFU << 16); + USBx->GDFIFOCFG |= 0x3EEU << 16; + + USBx->GAHBCFG |= USB_OTG_GAHBCFG_HBSTLEN_2; + USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN; + } + + return ret; +} + + +/** + * @brief Set the USB turnaround time + * @param USBx USB Instance + * @param hclk: AHB clock frequency + * @retval USB turnaround time In PHY Clocks number + */ +HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, + uint32_t hclk, uint8_t speed) +{ + uint32_t UsbTrd; + + /* The USBTRD is configured according to the tables below, depending on AHB frequency + used by application. In the low AHB frequency range it is used to stretch enough the USB response + time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access + latency to the Data FIFO */ + if (speed == USBD_FS_SPEED) + { + if ((hclk >= 14200000U) && (hclk < 15000000U)) + { + /* hclk Clock Range between 14.2-15 MHz */ + UsbTrd = 0xFU; + } + else if ((hclk >= 15000000U) && (hclk < 16000000U)) + { + /* hclk Clock Range between 15-16 MHz */ + UsbTrd = 0xEU; + } + else if ((hclk >= 16000000U) && (hclk < 17200000U)) + { + /* hclk Clock Range between 16-17.2 MHz */ + UsbTrd = 0xDU; + } + else if ((hclk >= 17200000U) && (hclk < 18500000U)) + { + /* hclk Clock Range between 17.2-18.5 MHz */ + UsbTrd = 0xCU; + } + else if ((hclk >= 18500000U) && (hclk < 20000000U)) + { + /* hclk Clock Range between 18.5-20 MHz */ + UsbTrd = 0xBU; + } + else if ((hclk >= 20000000U) && (hclk < 21800000U)) + { + /* hclk Clock Range between 20-21.8 MHz */ + UsbTrd = 0xAU; + } + else if ((hclk >= 21800000U) && (hclk < 24000000U)) + { + /* hclk Clock Range between 21.8-24 MHz */ + UsbTrd = 0x9U; + } + else if ((hclk >= 24000000U) && (hclk < 27700000U)) + { + /* hclk Clock Range between 24-27.7 MHz */ + UsbTrd = 0x8U; + } + else if ((hclk >= 27700000U) && (hclk < 32000000U)) + { + /* hclk Clock Range between 27.7-32 MHz */ + UsbTrd = 0x7U; + } + else /* if(hclk >= 32000000) */ + { + /* hclk Clock Range between 32-200 MHz */ + UsbTrd = 0x6U; + } + } + else if (speed == USBD_HS_SPEED) + { + UsbTrd = USBD_HS_TRDT_VALUE; + } + else + { + UsbTrd = USBD_DEFAULT_TRDT_VALUE; + } + + USBx->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; + USBx->GUSBCFG |= (uint32_t)((UsbTrd << 10) & USB_OTG_GUSBCFG_TRDT); + + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode Set functional mode + * @param USBx Selected device + * @param mode current core mode + * This parameter can be one of these values: + * @arg USB_DEVICE_MODE Peripheral mode + * @arg USB_HOST_MODE Host mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode) +{ + uint32_t ms = 0U; + + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); + + if (mode == USB_HOST_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; + + do + { + HAL_Delay(10U); + ms += 10U; + } while ((USB_GetMode(USBx) != (uint32_t)USB_HOST_MODE) && (ms < HAL_USB_CURRENT_MODE_MAX_DELAY_MS)); + } + else if (mode == USB_DEVICE_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + + do + { + HAL_Delay(10U); + ms += 10U; + } while ((USB_GetMode(USBx) != (uint32_t)USB_DEVICE_MODE) && (ms < HAL_USB_CURRENT_MODE_MAX_DELAY_MS)); + } + else + { + return HAL_ERROR; + } + + if (ms == HAL_USB_CURRENT_MODE_MAX_DELAY_MS) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief USB_DevInit Initializes the USB_OTG controller registers + * for device mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + for (i = 0U; i < 15U; i++) + { + USBx->DIEPTXF[i] = 0U; + } + + /* VBUS Sensing setup */ + if (cfg.vbus_sensing_enable == 0U) + { + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + + /* Deactivate VBUS Sensing B */ + USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + /* B-peripheral session valid override enable */ + USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + } + else + { + /* Enable HW VBUS sensing */ + USBx->GCCFG |= USB_OTG_GCCFG_VBDEN; + } + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + + if (cfg.phy_itface == USB_OTG_ULPI_PHY) + { + if (cfg.speed == USBD_HS_SPEED) + { + /* Set Core speed to High speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH); + } + else + { + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_HIGH_IN_FULL); + } + } + else + { + /* Set Core speed to Full speed mode */ + (void)USB_SetDevSpeed(USBx, USB_OTG_SPEED_FULL); + } + + /* Flush the FIFOs */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Clear all pending Device Interrupts */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + if (i == 0U) + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_SNAK; + } + else + { + USBx_INEP(i)->DIEPCTL = USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK; + } + } + else + { + USBx_INEP(i)->DIEPCTL = 0U; + } + + USBx_INEP(i)->DIEPTSIZ = 0U; + USBx_INEP(i)->DIEPINT = 0xFB7FU; + } + + for (i = 0U; i < cfg.dev_endpoints; i++) + { + if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + if (i == 0U) + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_SNAK; + } + else + { + USBx_OUTEP(i)->DOEPCTL = USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK; + } + } + else + { + USBx_OUTEP(i)->DOEPCTL = 0U; + } + + USBx_OUTEP(i)->DOEPTSIZ = 0U; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xBFFFFFFFU; + + /* Enable the common interrupts */ + if (cfg.dma_enable == 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + } + + /* Enable interrupts matching to the Device mode ONLY */ + USBx->GINTMSK |= USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST | + USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT | + USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM | + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM; + + if (cfg.Sof_enable != 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; + } + + if (cfg.vbus_sensing_enable == 1U) + { + USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); + } + + return ret; +} + +/** + * @brief USB_FlushTxFifo Flush a Tx FIFO + * @param USBx Selected device + * @param num FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Flush TX Fifo */ + count = 0U; + USBx->GRSTCTL = (USB_OTG_GRSTCTL_TXFFLSH | (num << 6)); + + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo Flush Rx FIFO + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Flush RX Fifo */ + count = 0U; + USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; + + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_SetDevSpeed Initializes the DevSpd field of DCFG register + * depending the PHY type and the enumeration speed of the device. + * @param USBx Selected device + * @param speed device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_HIGH: High speed mode + * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @retval Hal status + */ +HAL_StatusTypeDef USB_SetDevSpeed(const USB_OTG_GlobalTypeDef *USBx, uint8_t speed) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG |= speed; + return HAL_OK; +} + +/** + * @brief USB_GetDevSpeed Return the Dev Speed + * @param USBx Selected device + * @retval speed device speed + * This parameter can be one of these values: + * @arg USBD_HS_SPEED: High speed mode + * @arg USBD_FS_SPEED: Full speed mode + */ +uint8_t USB_GetDevSpeed(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t speed; + uint32_t DevEnumSpeed = USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD; + + if (DevEnumSpeed == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ) + { + speed = USBD_HS_SPEED; + } + else if ((DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ) || + (DevEnumSpeed == DSTS_ENUMSPD_FS_PHY_48MHZ)) + { + speed = USBD_FS_SPEED; + } + else + { + speed = 0xFU; + } + + return speed; +} + +/** + * @brief Activate and configure an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + } + else + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_USBAEP; + } + } + return HAL_OK; +} + +/** + * @brief Activate and configure a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= (ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK)); + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= (ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ) | + ((uint32_t)ep->type << 18) | (epnum << 22) | + USB_OTG_DOEPCTL_USBAEP; + } + + USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; + } + + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_USBAEP | + USB_OTG_DIEPCTL_MPSIZ | + USB_OTG_DIEPCTL_TXFNUM | + USB_OTG_DIEPCTL_SD0PID_SEVNFRM | + USB_OTG_DIEPCTL_EPTYP); + } + else + { + if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; + } + + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_USBAEP | + USB_OTG_DOEPCTL_MPSIZ | + USB_OTG_DOEPCTL_SD0PID_SEVNFRM | + USB_OTG_DOEPCTL_EPTYP); + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize a dedicated endpoint + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + /* Read DEPCTLn register */ + if (ep->is_in == 1U) + { + if ((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SNAK; + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_EPDIS; + } + + USBx_INEP(epnum)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & (uint32_t)(1UL << (ep->num & EP_ADDR_MSK))); + } + else + { + if ((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SNAK; + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_EPDIS; + } + + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((uint32_t)(1UL << (ep->num & EP_ADDR_MSK)) << 16)); + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer : setup and starts a transfer over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + uint16_t pktcnt; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0U) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + + if (epnum == 0U) + { + if (ep->xfer_len > ep->maxpacket) + { + ep->xfer_len = ep->maxpacket; + } + + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & + (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19)); + } + + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + + if (ep->type == EP_TYPE_ISOC) + { + USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); + USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1U << 29)); + } + } + + if (dma == 1U) + { + if ((uint32_t)ep->dma_addr != 0U) + { + USBx_INEP(epnum)->DIEPDMA = (uint32_t)(ep->dma_addr); + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + } + else + { + /* EP enable, IN data in FIFO */ + USBx_INEP(epnum)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + if (ep->type != EP_TYPE_ISOC) + { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0U) + { + USBx_DEVICE->DIEPEMPMSK |= 1UL << (ep->num & EP_ADDR_MSK); + } + } + else + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + + (void)USB_WritePacket(USBx, ep->xfer_buff, ep->num, (uint16_t)ep->xfer_len, dma); + } + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(epnum)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (epnum == 0U) + { + if (ep->xfer_len > 0U) + { + ep->xfer_len = ep->maxpacket; + } + + /* Store transfer size, for EP0 this is equal to endpoint max packet size */ + ep->xfer_size = ep->maxpacket; + + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + if (ep->xfer_len == 0U) + { + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); + USBx_OUTEP(epnum)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + } + else + { + pktcnt = (uint16_t)((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket); + ep->xfer_size = ep->maxpacket * pktcnt; + + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_PKTCNT & ((uint32_t)pktcnt << 19); + USBx_OUTEP(epnum)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_XFRSIZ & ep->xfer_size; + } + } + + if (dma == 1U) + { + if ((uint32_t)ep->xfer_buff != 0U) + { + USBx_OUTEP(epnum)->DOEPDMA = (uint32_t)(ep->xfer_buff); + } + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & (1U << 8)) == 0U) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; + } + else + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; + } + } + /* EP enable */ + USBx_OUTEP(epnum)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + + +/** + * @brief USB_EPStoptXfer Stop transfer on an EP + * @param USBx usb device instance + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStopXfer(const USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + __IO uint32_t count = 0U; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + + /* IN endpoint */ + if (ep->is_in == 1U) + { + /* EP enable, IN data in FIFO */ + if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_SNAK); + USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_EPDIS); + + do + { + count++; + + if (count > 10000U) + { + ret = HAL_ERROR; + break; + } + } while (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA); + } + } + else /* OUT endpoint */ + { + if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_SNAK); + USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_EPDIS); + + do + { + count++; + + if (count > 10000U) + { + ret = HAL_ERROR; + break; + } + } while (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA); + } + } + + return ret; +} + + +/** + * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated + * with the EP/channel + * @param USBx Selected device + * @param src pointer to source buffer + * @param ch_ep_num endpoint or host channel number + * @param len Number of bytes to write + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL status + */ +HAL_StatusTypeDef USB_WritePacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *src, + uint8_t ch_ep_num, uint16_t len, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t *pSrc = src; + uint32_t count32b; + uint32_t i; + + if (dma == 0U) + { + count32b = ((uint32_t)len + 3U) / 4U; + for (i = 0U; i < count32b; i++) + { + USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc); + pSrc++; + pSrc++; + pSrc++; + pSrc++; + } + } + + return HAL_OK; +} + +/** + * @brief USB_ReadPacket : read a packet from the RX FIFO + * @param USBx Selected device + * @param dest source pointer + * @param len Number of bytes to read + * @retval pointer to destination buffer + */ +void *USB_ReadPacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint8_t *pDest = dest; + uint32_t pData; + uint32_t i; + uint32_t count32b = (uint32_t)len >> 2U; + uint16_t remaining_bytes = len % 4U; + + for (i = 0U; i < count32b; i++) + { + __UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U)); + pDest++; + pDest++; + pDest++; + pDest++; + } + + /* When Number of data is not word aligned, read the remaining byte */ + if (remaining_bytes != 0U) + { + i = 0U; + __UNALIGNED_UINT32_WRITE(&pData, USBx_DFIFO(0U)); + + do + { + *(uint8_t *)pDest = (uint8_t)(pData >> (8U * (uint8_t)(i))); + i++; + pDest++; + remaining_bytes--; + } while (remaining_bytes != 0U); + } + + return ((void *)pDest); +} + +/** + * @brief USB_EPSetStall : set a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + if (((USBx_INEP(epnum)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_INEP(epnum)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); + } + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; + } + else + { + if (((USBx_OUTEP(epnum)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == 0U) && (epnum != 0U)) + { + USBx_OUTEP(epnum)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); + } + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; + } + + return HAL_OK; +} + +/** + * @brief USB_EPClearStall : Clear a stall condition over an EP + * @param USBx Selected device + * @param ep pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t epnum = (uint32_t)ep->num; + + if (ep->is_in == 1U) + { + USBx_INEP(epnum)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_INEP(epnum)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + else + { + USBx_OUTEP(epnum)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_BULK)) + { + USBx_OUTEP(epnum)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + return HAL_OK; +} + +/** + * @brief USB_StopDevice : Stop the usb device mode + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) +{ + HAL_StatusTypeDef ret; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Clear Pending interrupt */ + for (i = 0U; i < 15U; i++) + { + USBx_INEP(i)->DIEPINT = 0xFB7FU; + USBx_OUTEP(i)->DOEPINT = 0xFB7FU; + } + + /* Clear interrupt masks */ + USBx_DEVICE->DIEPMSK = 0U; + USBx_DEVICE->DOEPMSK = 0U; + USBx_DEVICE->DAINTMSK = 0U; + + /* Flush the FIFO */ + ret = USB_FlushRxFifo(USBx); + if (ret != HAL_OK) + { + return ret; + } + + ret = USB_FlushTxFifo(USBx, 0x10U); + if (ret != HAL_OK) + { + return ret; + } + + return ret; +} + +/** + * @brief USB_SetDevAddress : Stop the usb device mode + * @param USBx Selected device + * @param address new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress(const USB_OTG_GlobalTypeDef *USBx, uint8_t address) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_DEVICE->DCFG &= ~(USB_OTG_DCFG_DAD); + USBx_DEVICE->DCFG |= ((uint32_t)address << 4) & USB_OTG_DCFG_DAD; + + return HAL_OK; +} + +/** + * @brief USB_DevConnect : Connect the USB device by enabling Rpu + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* In case phy is stopped, ensure to ungate and restore the phy CLK */ + USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); + + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS; + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect : Disconnect the USB device by disabling Rpu + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* In case phy is stopped, ensure to ungate and restore the phy CLK */ + USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK); + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts: return the global USB interrupt status + * @param USBx Selected device + * @retval USB Global Interrupt status + */ +uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx) +{ + uint32_t tmpreg; + + tmpreg = USBx->GINTSTS; + tmpreg &= USBx->GINTMSK; + + return tmpreg; +} + +/** + * @brief USB_ReadChInterrupts: return USB channel interrupt status + * @param USBx Selected device + * @param chnum Channel number + * @retval USB Channel Interrupt status + */ +uint32_t USB_ReadChInterrupts(const USB_OTG_GlobalTypeDef *USBx, uint8_t chnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_HC(chnum)->HCINT; + tmpreg &= USBx_HC(chnum)->HCINTMSK; + + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status + * @param USBx Selected device + * @retval USB Device OUT EP interrupt status + */ +uint32_t USB_ReadDevAllOutEpInterrupt(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xffff0000U) >> 16); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status + * @param USBx Selected device + * @retval USB Device IN EP interrupt status + */ +uint32_t USB_ReadDevAllInEpInterrupt(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + + return ((tmpreg & 0xFFFFU)); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + + tmpreg = USBx_OUTEP((uint32_t)epnum)->DOEPINT; + tmpreg &= USBx_DEVICE->DOEPMSK; + + return tmpreg; +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx Selected device + * @param epnum endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t tmpreg; + uint32_t msk; + uint32_t emp; + + msk = USBx_DEVICE->DIEPMSK; + emp = USBx_DEVICE->DIEPEMPMSK; + msk |= ((emp >> (epnum & EP_ADDR_MSK)) & 0x1U) << 7; + tmpreg = USBx_INEP((uint32_t)epnum)->DIEPINT & msk; + + return tmpreg; +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx Selected device + * @param interrupt flag + * @retval None + */ +void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) +{ + USBx->GINTSTS &= interrupt; +} + +/** + * @brief Returns USB core mode + * @param USBx Selected device + * @retval return core mode : Host or Device + * This parameter can be one of these values: + * 0 : Host + * 1 : Device + */ +uint32_t USB_GetMode(const USB_OTG_GlobalTypeDef *USBx) +{ + return ((USBx->GINTSTS) & 0x1U); +} + +/** + * @brief Activate EP0 for Setup transactions + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateSetup(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* Set the MPS of the IN EP0 to 64 bytes */ + USBx_INEP(0U)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; + + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; + + return HAL_OK; +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx Selected device + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @param psetup pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(const USB_OTG_GlobalTypeDef *USBx, uint8_t dma, const uint8_t *psetup) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t gSNPSiD = *(__IO const uint32_t *)(&USBx->CID + 0x1U); + + if (gSNPSiD > USB_OTG_CORE_ID_300A) + { + if ((USBx_OUTEP(0U)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + return HAL_OK; + } + } + + USBx_OUTEP(0U)->DOEPTSIZ = 0U; + USBx_OUTEP(0U)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)); + USBx_OUTEP(0U)->DOEPTSIZ |= (3U * 8U); + USBx_OUTEP(0U)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; + + if (dma == 1U) + { + USBx_OUTEP(0U)->DOEPDMA = (uint32_t)psetup; + /* EP enable */ + USBx_OUTEP(0U)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP; + } + + return HAL_OK; +} + +/** + * @brief Reset the USB Core (needed after USB clock settings change) + * @param USBx Selected device + * @retval HAL status + */ +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) +{ + __IO uint32_t count = 0U; + + /* Wait for AHB master IDLE state. */ + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0U); + + /* Core Soft Reset */ + count = 0U; + USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; + + do + { + count++; + + if (count > HAL_USB_TIMEOUT) + { + return HAL_TIMEOUT; + } + } while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); + + return HAL_OK; +} + +/** + * @brief USB_HostInit : Initializes the USB OTG controller registers + * for Host mode + * @param USBx Selected device + * @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t i; + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0U; + + /* Disable VBUS sensing */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_VBDEN); + + /* Disable Battery chargin detector */ + USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN); + + + if ((USBx->GUSBCFG & USB_OTG_GUSBCFG_PHYSEL) == 0U) + { + if (cfg.speed == USBH_FSLS_SPEED) + { + /* Force Device Enumeration to FS/LS mode only */ + USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; + } + else + { + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + } + else + { + /* Set default Max speed support */ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + + /* Make sure the FIFOs are flushed. */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Clear all pending HC Interrupts */ + for (i = 0U; i < cfg.Host_channels; i++) + { + USBx_HC(i)->HCINT = CLEAR_INTERRUPT_MASK; + USBx_HC(i)->HCINTMSK = 0U; + } + + /* Disable all interrupts. */ + USBx->GINTMSK = 0U; + + /* Clear any pending interrupts */ + USBx->GINTSTS = CLEAR_INTERRUPT_MASK; + /* set Rx FIFO size */ + USBx->GRXFSIZ = 0x200U; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((0x100U << 16) & USB_OTG_NPTXFD) | 0x200U); + USBx->HPTXFSIZ = (uint32_t)(((0xE0U << 16) & USB_OTG_HPTXFSIZ_PTXFD) | 0x300U); + + /* Enable the common interrupts */ + if (cfg.dma_enable == 0U) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + } + + /* Enable interrupts matching to the Host mode ONLY */ + USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM | \ + USB_OTG_GINTMSK_SOFM | USB_OTG_GINTSTS_DISCINT | \ + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); + + return ret; +} + +/** + * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the + * HCFG register on the PHY type and set the right frame interval + * @param USBx Selected device + * @param freq clock frequency + * This parameter can be one of these values: + * HCFG_48_MHZ : Full Speed 48 MHz Clock + * HCFG_6_MHZ : Low Speed 6 MHz Clock + * @retval HAL status + */ +HAL_StatusTypeDef USB_InitFSLSPClkSel(const USB_OTG_GlobalTypeDef *USBx, uint8_t freq) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); + USBx_HOST->HCFG |= (uint32_t)freq & USB_OTG_HCFG_FSLSPCS; + + if (freq == HCFG_48_MHZ) + { + USBx_HOST->HFIR = HFIR_48_MHZ; + } + else if (freq == HCFG_6_MHZ) + { + USBx_HOST->HFIR = HFIR_6_MHZ; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief USB_OTG_ResetPort : Reset Host Port + * @param USBx Selected device + * @retval HAL status + * @note (1)The application must wait at least 10 ms + * before clearing the reset bit. + */ +HAL_StatusTypeDef USB_ResetPort(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); + HAL_Delay(100U); /* See Note #1 */ + USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); + HAL_Delay(10U); + + return HAL_OK; +} + +/** + * @brief USB_DriveVbus : activate or de-activate vbus + * @param state VBUS state + * This parameter can be one of these values: + * 0 : Deactivate VBUS + * 1 : Activate VBUS + * @retval HAL status + */ +HAL_StatusTypeDef USB_DriveVbus(const USB_OTG_GlobalTypeDef *USBx, uint8_t state) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET | + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG); + + if (((hprt0 & USB_OTG_HPRT_PPWR) == 0U) && (state == 1U)) + { + USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); + } + if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0U)) + { + USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); + } + return HAL_OK; +} + +/** + * @brief Return Host Core speed + * @param USBx Selected device + * @retval speed : Host speed + * This parameter can be one of these values: + * @arg HCD_SPEED_HIGH: High speed mode + * @arg HCD_SPEED_FULL: Full speed mode + * @arg HCD_SPEED_LOW: Low speed mode + */ +uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t hprt0 = 0U; + + hprt0 = USBx_HPRT0; + return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); +} + +/** + * @brief Return Host Current Frame number + * @param USBx Selected device + * @retval current frame number + */ +uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); +} + +/** + * @brief Initialize a host channel + * @param USBx Selected device + * @param ch_num Channel number + * This parameter can be a value from 1 to 15 + * @param epnum Endpoint number + * This parameter can be a value from 1 to 15 + * @param dev_address Current device address + * This parameter can be a value from 0 to 255 + * @param speed Current device speed + * This parameter can be one of these values: + * @arg USB_OTG_SPEED_HIGH: High speed mode + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + * @param ep_type Endpoint Type + * This parameter can be one of these values: + * @arg EP_TYPE_CTRL: Control type + * @arg EP_TYPE_ISOC: Isochronous type + * @arg EP_TYPE_BULK: Bulk type + * @arg EP_TYPE_INTR: Interrupt type + * @param mps Max Packet Size + * This parameter can be a value from 0 to 32K + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, + uint8_t epnum, uint8_t dev_address, uint8_t speed, + uint8_t ep_type, uint16_t mps) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t HCcharEpDir; + uint32_t HCcharLowSpeed; + uint32_t HostCoreSpeed; + + /* Clear old interrupt conditions for this host channel. */ + USBx_HC((uint32_t)ch_num)->HCINT = CLEAR_INTERRUPT_MASK; + + /* Enable channel interrupts required for this transfer. */ + switch (ep_type) + { + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_NAKM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + else + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET | + USB_OTG_HCINTMSK_ACKM; + } + break; + + case EP_TYPE_INTR: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_STALLM | + USB_OTG_HCINTMSK_TXERRM | + USB_OTG_HCINTMSK_DTERRM | + USB_OTG_HCINTMSK_NAKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + + break; + + case EP_TYPE_ISOC: + USBx_HC((uint32_t)ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM | + USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_AHBERR | + USB_OTG_HCINTMSK_FRMORM; + + if ((epnum & 0x80U) == 0x80U) + { + USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); + } + break; + + default: + ret = HAL_ERROR; + break; + } + + /* Clear Hub Start Split transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT = 0U; + + /* Enable host channel Halt interrupt */ + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM; + + /* Enable the top level host channel interrupt. */ + USBx_HOST->HAINTMSK |= 1UL << (ch_num & 0xFU); + + /* Make sure host channel interrupts are enabled. */ + USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; + + /* Program the HCCHAR register */ + if ((epnum & 0x80U) == 0x80U) + { + HCcharEpDir = (0x1U << 15) & USB_OTG_HCCHAR_EPDIR; + } + else + { + HCcharEpDir = 0U; + } + + HostCoreSpeed = USB_GetHostSpeed(USBx); + + /* LS device plugged to HUB */ + if ((speed == HPRT0_PRTSPD_LOW_SPEED) && (HostCoreSpeed != HPRT0_PRTSPD_LOW_SPEED)) + { + HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV; + } + else + { + HCcharLowSpeed = 0U; + } + + USBx_HC((uint32_t)ch_num)->HCCHAR = (((uint32_t)dev_address << 22) & USB_OTG_HCCHAR_DAD) | + ((((uint32_t)epnum & 0x7FU) << 11) & USB_OTG_HCCHAR_EPNUM) | + (((uint32_t)ep_type << 18) & USB_OTG_HCCHAR_EPTYP) | + ((uint32_t)mps & USB_OTG_HCCHAR_MPSIZ) | + USB_OTG_HCCHAR_MC_0 | HCcharEpDir | HCcharLowSpeed; + + if ((ep_type == EP_TYPE_INTR) || (ep_type == EP_TYPE_ISOC)) + { + USBx_HC((uint32_t)ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM; + } + + return ret; +} + +/** + * @brief Start a transfer over a host channel + * @param USBx Selected device + * @param hc pointer to host channel structure + * @param dma USB dma enabled or disabled + * This parameter can be one of these values: + * 0 : DMA feature not used + * 1 : DMA feature used + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t ch_num = (uint32_t)hc->ch_num; + __IO uint32_t tmpreg; + uint8_t is_oddframe; + uint16_t len_words; + uint16_t num_packets; + uint16_t max_hc_pkt_count = HC_MAX_PKT_CNT; + + /* in DMA mode host Core automatically issues ping in case of NYET/NAK */ + if (dma == 1U) + { + if ((hc->ep_type == EP_TYPE_CTRL) || (hc->ep_type == EP_TYPE_BULK)) + { + + USBx_HC((uint32_t)ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | + USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_NAKM); + } + } + else + { + if ((hc->speed == USBH_HS_SPEED) && (hc->do_ping == 1U)) + { + (void)USB_DoPing(USBx, hc->ch_num); + return HAL_OK; + } + } + + if (hc->do_ssplit == 1U) + { + /* Set number of packet to 1 for Split transaction */ + num_packets = 1U; + + if (hc->ep_is_in != 0U) + { + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + else + { + if (hc->ep_type == EP_TYPE_ISOC) + { + if (hc->xfer_len > ISO_SPLT_MPS) + { + /* Isochrone Max Packet Size for Split mode */ + hc->XferSize = hc->max_packet; + hc->xfer_len = hc->XferSize; + + if ((hc->iso_splt_xactPos == HCSPLT_BEGIN) || (hc->iso_splt_xactPos == HCSPLT_MIDDLE)) + { + hc->iso_splt_xactPos = HCSPLT_MIDDLE; + } + else + { + hc->iso_splt_xactPos = HCSPLT_BEGIN; + } + } + else + { + hc->XferSize = hc->xfer_len; + + if ((hc->iso_splt_xactPos != HCSPLT_BEGIN) && (hc->iso_splt_xactPos != HCSPLT_MIDDLE)) + { + hc->iso_splt_xactPos = HCSPLT_FULL; + } + else + { + hc->iso_splt_xactPos = HCSPLT_END; + } + } + } + else + { + if ((dma == 1U) && (hc->xfer_len > hc->max_packet)) + { + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + else + { + hc->XferSize = hc->xfer_len; + } + } + } + } + else + { + /* Compute the expected number of packets associated to the transfer */ + if (hc->xfer_len > 0U) + { + num_packets = (uint16_t)((hc->xfer_len + hc->max_packet - 1U) / hc->max_packet); + + if (num_packets > max_hc_pkt_count) + { + num_packets = max_hc_pkt_count; + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + } + else + { + num_packets = 1U; + } + + /* + * For IN channel HCTSIZ.XferSize is expected to be an integer multiple of + * max_packet size. + */ + if (hc->ep_is_in != 0U) + { + hc->XferSize = (uint32_t)num_packets * hc->max_packet; + } + else + { + hc->XferSize = hc->xfer_len; + } + } + + /* Initialize the HCTSIZn register */ + USBx_HC(ch_num)->HCTSIZ = (hc->XferSize & USB_OTG_HCTSIZ_XFRSIZ) | + (((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + (((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID); + + if (dma != 0U) + { + /* xfer_buff MUST be 32-bits aligned */ + USBx_HC(ch_num)->HCDMA = (uint32_t)hc->xfer_buff; + } + + is_oddframe = (((uint32_t)USBx_HOST->HFNUM & 0x01U) != 0U) ? 0U : 1U; + USBx_HC(ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; + USBx_HC(ch_num)->HCCHAR |= (uint32_t)is_oddframe << 29; + + if (hc->do_ssplit == 1U) + { + /* Set Hub start Split transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT = ((uint32_t)hc->hub_addr << USB_OTG_HCSPLT_HUBADDR_Pos) | + (uint32_t)hc->hub_port_nbr | USB_OTG_HCSPLT_SPLITEN; + + /* unmask ack & nyet for IN/OUT transactions */ + USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_ACKM | + USB_OTG_HCINTMSK_NYET); + + if ((hc->do_csplit == 1U) && (hc->ep_is_in == 0U)) + { + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_COMPLSPLT; + USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET; + } + + if (((hc->ep_type == EP_TYPE_ISOC) || (hc->ep_type == EP_TYPE_INTR)) && + (hc->do_csplit == 1U) && (hc->ep_is_in == 1U)) + { + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_COMPLSPLT; + } + + /* Position management for iso out transaction on split mode */ + if ((hc->ep_type == EP_TYPE_ISOC) && (hc->ep_is_in == 0U)) + { + /* Set data payload position */ + switch (hc->iso_splt_xactPos) + { + case HCSPLT_BEGIN: + /* First data payload for OUT Transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_XACTPOS_1; + break; + + case HCSPLT_MIDDLE: + /* Middle data payload for OUT Transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_XACTPOS_Pos; + break; + + case HCSPLT_END: + /* End data payload for OUT Transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_XACTPOS_0; + break; + + case HCSPLT_FULL: + /* Entire data payload for OUT Transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT |= USB_OTG_HCSPLT_XACTPOS; + break; + + default: + break; + } + } + } + else + { + /* Clear Hub Start Split transaction */ + USBx_HC((uint32_t)ch_num)->HCSPLT = 0U; + } + + /* Set host channel enable */ + tmpreg = USBx_HC(ch_num)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + + /* make sure to set the correct ep direction */ + if (hc->ep_is_in != 0U) + { + tmpreg |= USB_OTG_HCCHAR_EPDIR; + } + else + { + tmpreg &= ~USB_OTG_HCCHAR_EPDIR; + } + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(ch_num)->HCCHAR = tmpreg; + + if (dma != 0U) /* dma mode */ + { + return HAL_OK; + } + + if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U) && (hc->do_csplit == 0U)) + { + switch (hc->ep_type) + { + /* Non periodic transfer */ + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + + /* check if there is enough space in FIFO space */ + if (len_words > (USBx->HNPTXSTS & 0xFFFFU)) + { + /* need to process data in nptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; + } + break; + + /* Periodic transfer */ + case EP_TYPE_INTR: + case EP_TYPE_ISOC: + len_words = (uint16_t)((hc->xfer_len + 3U) / 4U); + /* check if there is enough space in FIFO space */ + if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */ + { + /* need to process data in ptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; + } + break; + + default: + break; + } + + /* Write packet into the Tx FIFO. */ + (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len, 0); + } + + return HAL_OK; +} + +/** + * @brief Read all host channel interrupts status + * @param USBx Selected device + * @retval HAL state + */ +uint32_t USB_HC_ReadInterrupt(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + return ((USBx_HOST->HAINT) & 0xFFFFU); +} + +/** + * @brief Halt a host channel + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Halt(const USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t hcnum = (uint32_t)hc_num; + __IO uint32_t count = 0U; + uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18; + uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31; + uint32_t SplitEna = (USBx_HC(hcnum)->HCSPLT & USB_OTG_HCSPLT_SPLITEN) >> 31; + + /* In buffer DMA, Channel disable must not be programmed for non-split periodic channels. + At the end of the next uframe/frame (in the worst case), the core generates a channel halted + and disables the channel automatically. */ + + if ((((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) && (SplitEna == 0U)) && + ((ChannelEna == 0U) || (((HcEpType == HCCHAR_ISOC) || (HcEpType == HCCHAR_INTR))))) + { + return HAL_OK; + } + + /* Check for space in the request queue to issue the halt. */ + if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK)) + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == 0U) + { + if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx_HOST->HPTXSTS & (0xFFU << 16)) == 0U) + { + USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + + return HAL_OK; +} + +/** + * @brief Initiate Do Ping protocol + * @param USBx Selected device + * @param hc_num Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_DoPing(const USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + uint32_t chnum = (uint32_t)ch_num; + uint32_t num_packets = 1U; + uint32_t tmpreg; + + USBx_HC(chnum)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) | + USB_OTG_HCTSIZ_DOPING; + + /* Set host channel enable */ + tmpreg = USBx_HC(chnum)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(chnum)->HCCHAR = tmpreg; + + return HAL_OK; +} + +/** + * @brief Stop Host Core + * @param USBx Selected device + * @retval HAL state + */ +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) +{ + HAL_StatusTypeDef ret = HAL_OK; + uint32_t USBx_BASE = (uint32_t)USBx; + __IO uint32_t count = 0U; + uint32_t value; + uint32_t i; + + (void)USB_DisableGlobalInt(USBx); + + /* Flush USB FIFO */ + if (USB_FlushTxFifo(USBx, 0x10U) != HAL_OK) /* all Tx FIFOs */ + { + ret = HAL_ERROR; + } + + if (USB_FlushRxFifo(USBx) != HAL_OK) + { + ret = HAL_ERROR; + } + + /* Flush out any leftover queued requests. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value &= ~USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + } + + /* Halt all channels to put them into a known state. */ + for (i = 0U; i <= 15U; i++) + { + value = USBx_HC(i)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value |= USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(i)->HCCHAR = value; + + do + { + count++; + + if (count > 1000U) + { + break; + } + } while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + + /* Clear any pending Host interrupts */ + USBx_HOST->HAINT = CLEAR_INTERRUPT_MASK; + USBx->GINTSTS = CLEAR_INTERRUPT_MASK; + + (void)USB_EnableGlobalInt(USBx); + + return ret; +} + +/** + * @brief USB_ActivateRemoteWakeup active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + if ((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; + } + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling + * @param USBx Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t USBx_BASE = (uint32_t)USBx; + + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); + + return HAL_OK; +} +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ +#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ + +/** + * @} + */ diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM4.s b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM4.s new file mode 100644 index 0000000..2c9ed0a --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM4.s @@ -0,0 +1,621 @@ +;******************************************************************************** +;* File Name : startup_stm32h747xx.s +;* @author MCD Application Team +;* Description : STM32H7xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;****************************************************************************** +;* @attention +;* +;* Copyright (c) 2019 STMicroelectronics. +;* All rights reserved. +;* +;* This software is licensed under terms that can be found in the LICENSE file +;* in the root directory of this software component. +;* If no LICENSE file comes with this software, it is provided AS-IS. +;* +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog interrupt ( wwdg1_it, wwdg2_it) + DCD PVD_AVD_IRQHandler ; PVD/AVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 + DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0 + DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0 + DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1 + DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1 + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt + DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10] + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD 0 ; Reserved + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD ETH_IRQHandler ; Ethernet + DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line + DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt + DCD CM7_SEV_IRQHandler ; CM7 Send event interrupt for CM4 + DCD CM4_SEV_IRQHandler ; CM4 Send event interrupt for CM7 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out + DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In + DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI + DCD OTG_HS_IRQHandler ; USB OTG HS + DCD DCMI_IRQHandler ; DCMI + DCD 0 ; Reserved + DCD RNG_IRQHandler ; Rng + DCD FPU_IRQHandler ; FPU + DCD UART7_IRQHandler ; UART7 + DCD UART8_IRQHandler ; UART8 + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + DCD SPI6_IRQHandler ; SPI6 + DCD SAI1_IRQHandler ; SAI1 + DCD LTDC_IRQHandler ; LTDC + DCD LTDC_ER_IRQHandler ; LTDC error + DCD DMA2D_IRQHandler ; DMA2D + DCD SAI2_IRQHandler ; SAI2 + DCD QUADSPI_IRQHandler ; QUADSPI + DCD LPTIM1_IRQHandler ; LPTIM1 + DCD CEC_IRQHandler ; HDMI_CEC + DCD I2C4_EV_IRQHandler ; I2C4 Event + DCD I2C4_ER_IRQHandler ; I2C4 Error + DCD SPDIF_RX_IRQHandler ; SPDIF_RX + DCD OTG_FS_EP1_OUT_IRQHandler ; USB OTG FS End Point 1 Out + DCD OTG_FS_EP1_IN_IRQHandler ; USB OTG FS End Point 1 In + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt + DCD HRTIM1_Master_IRQHandler ; HRTIM Master Timer global Interrupts + DCD HRTIM1_TIMA_IRQHandler ; HRTIM Timer A global Interrupt + DCD HRTIM1_TIMB_IRQHandler ; HRTIM Timer B global Interrupt + DCD HRTIM1_TIMC_IRQHandler ; HRTIM Timer C global Interrupt + DCD HRTIM1_TIMD_IRQHandler ; HRTIM Timer D global Interrupt + DCD HRTIM1_TIME_IRQHandler ; HRTIM Timer E global Interrupt + DCD HRTIM1_FLT_IRQHandler ; HRTIM Fault global Interrupt + DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt + DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt + DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt + DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt + DCD SAI3_IRQHandler ; SAI3 global Interrupt + DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt + DCD TIM15_IRQHandler ; TIM15 global Interrupt + DCD TIM16_IRQHandler ; TIM16 global Interrupt + DCD TIM17_IRQHandler ; TIM17 global Interrupt + DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt + DCD MDIOS_IRQHandler ; MDIOS global Interrupt + DCD JPEG_IRQHandler ; JPEG global Interrupt + DCD MDMA_IRQHandler ; MDMA global Interrupt + DCD DSI_IRQHandler ; DSI global Interrupt + DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt + DCD HSEM1_IRQHandler ; HSEM1 global Interrupt + DCD HSEM2_IRQHandler ; HSEM2 global Interrupt + DCD ADC3_IRQHandler ; ADC3 global Interrupt + DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt + DCD BDMA_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt + DCD BDMA_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt + DCD BDMA_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt + DCD BDMA_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt + DCD BDMA_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt + DCD BDMA_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt + DCD BDMA_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt + DCD BDMA_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt + DCD COMP1_IRQHandler ; COMP1 global Interrupt + DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt + DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt + DCD LPTIM4_IRQHandler ; LP TIM4 global interrupt + DCD LPTIM5_IRQHandler ; LP TIM5 global interrupt + DCD LPUART1_IRQHandler ; LP UART1 interrupt + DCD WWDG_RST_IRQHandler ; Window Watchdog reset interrupt (exti_d2_wwdg_it, exti_d1_wwdg_it) + DCD CRS_IRQHandler ; Clock Recovery Global Interrupt + DCD ECC_IRQHandler ; ECC diagnostic Global Interrupt + DCD SAI4_IRQHandler ; SAI4 global interrupt + DCD 0 ; Reserved + DCD HOLD_CORE_IRQHandler ; Hold core interrupt + DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins + + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_AVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT FDCAN1_IT0_IRQHandler [WEAK] + EXPORT FDCAN2_IT0_IRQHandler [WEAK] + EXPORT FDCAN1_IT1_IRQHandler [WEAK] + EXPORT FDCAN2_IT1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] + EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT SDMMC1_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT ETH_IRQHandler [WEAK] + EXPORT ETH_WKUP_IRQHandler [WEAK] + EXPORT FDCAN_CAL_IRQHandler [WEAK] + EXPORT CM7_SEV_IRQHandler [WEAK] + EXPORT CM4_SEV_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK] + EXPORT OTG_HS_WKUP_IRQHandler [WEAK] + EXPORT OTG_HS_IRQHandler [WEAK] + EXPORT DCMI_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT UART7_IRQHandler [WEAK] + EXPORT UART8_IRQHandler [WEAK] + EXPORT SPI4_IRQHandler [WEAK] + EXPORT SPI5_IRQHandler [WEAK] + EXPORT SPI6_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT LTDC_IRQHandler [WEAK] + EXPORT LTDC_ER_IRQHandler [WEAK] + EXPORT DMA2D_IRQHandler [WEAK] + EXPORT SAI2_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT I2C4_EV_IRQHandler [WEAK] + EXPORT I2C4_ER_IRQHandler [WEAK] + EXPORT SPDIF_RX_IRQHandler [WEAK] + EXPORT OTG_FS_EP1_OUT_IRQHandler [WEAK] + EXPORT OTG_FS_EP1_IN_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMAMUX1_OVR_IRQHandler [WEAK] + EXPORT HRTIM1_Master_IRQHandler [WEAK] + EXPORT HRTIM1_TIMA_IRQHandler [WEAK] + EXPORT HRTIM1_TIMB_IRQHandler [WEAK] + EXPORT HRTIM1_TIMC_IRQHandler [WEAK] + EXPORT HRTIM1_TIMD_IRQHandler [WEAK] + EXPORT HRTIM1_TIME_IRQHandler [WEAK] + EXPORT HRTIM1_FLT_IRQHandler [WEAK] + EXPORT DFSDM1_FLT0_IRQHandler [WEAK] + EXPORT DFSDM1_FLT1_IRQHandler [WEAK] + EXPORT DFSDM1_FLT2_IRQHandler [WEAK] + EXPORT DFSDM1_FLT3_IRQHandler [WEAK] + EXPORT SAI3_IRQHandler [WEAK] + EXPORT SWPMI1_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT MDIOS_WKUP_IRQHandler [WEAK] + EXPORT MDIOS_IRQHandler [WEAK] + EXPORT JPEG_IRQHandler [WEAK] + EXPORT MDMA_IRQHandler [WEAK] + EXPORT DSI_IRQHandler [WEAK] + EXPORT SDMMC2_IRQHandler [WEAK] + EXPORT HSEM1_IRQHandler [WEAK] + EXPORT HSEM2_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT DMAMUX2_OVR_IRQHandler [WEAK] + EXPORT BDMA_Channel0_IRQHandler [WEAK] + EXPORT BDMA_Channel1_IRQHandler [WEAK] + EXPORT BDMA_Channel2_IRQHandler [WEAK] + EXPORT BDMA_Channel3_IRQHandler [WEAK] + EXPORT BDMA_Channel4_IRQHandler [WEAK] + EXPORT BDMA_Channel5_IRQHandler [WEAK] + EXPORT BDMA_Channel6_IRQHandler [WEAK] + EXPORT BDMA_Channel7_IRQHandler [WEAK] + EXPORT COMP1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT LPTIM3_IRQHandler [WEAK] + EXPORT LPTIM4_IRQHandler [WEAK] + EXPORT LPTIM5_IRQHandler [WEAK] + EXPORT LPUART1_IRQHandler [WEAK] + EXPORT WWDG_RST_IRQHandler [WEAK] + EXPORT CRS_IRQHandler [WEAK] + EXPORT ECC_IRQHandler [WEAK] + EXPORT SAI4_IRQHandler [WEAK] + EXPORT HOLD_CORE_IRQHandler [WEAK] + EXPORT WAKEUP_PIN_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_AVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +FDCAN1_IT0_IRQHandler +FDCAN2_IT0_IRQHandler +FDCAN1_IT1_IRQHandler +FDCAN2_IT1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +TIM8_BRK_TIM12_IRQHandler +TIM8_UP_TIM13_IRQHandler +TIM8_TRG_COM_TIM14_IRQHandler +TIM8_CC_IRQHandler +DMA1_Stream7_IRQHandler +FMC_IRQHandler +SDMMC1_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +ETH_IRQHandler +ETH_WKUP_IRQHandler +FDCAN_CAL_IRQHandler +CM7_SEV_IRQHandler +CM4_SEV_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +OTG_HS_EP1_OUT_IRQHandler +OTG_HS_EP1_IN_IRQHandler +OTG_HS_WKUP_IRQHandler +OTG_HS_IRQHandler +DCMI_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +UART7_IRQHandler +UART8_IRQHandler +SPI4_IRQHandler +SPI5_IRQHandler +SPI6_IRQHandler +SAI1_IRQHandler +LTDC_IRQHandler +LTDC_ER_IRQHandler +DMA2D_IRQHandler +SAI2_IRQHandler +QUADSPI_IRQHandler +LPTIM1_IRQHandler +CEC_IRQHandler +I2C4_EV_IRQHandler +I2C4_ER_IRQHandler +SPDIF_RX_IRQHandler +OTG_FS_EP1_OUT_IRQHandler +OTG_FS_EP1_IN_IRQHandler +OTG_FS_WKUP_IRQHandler +OTG_FS_IRQHandler +DMAMUX1_OVR_IRQHandler +HRTIM1_Master_IRQHandler +HRTIM1_TIMA_IRQHandler +HRTIM1_TIMB_IRQHandler +HRTIM1_TIMC_IRQHandler +HRTIM1_TIMD_IRQHandler +HRTIM1_TIME_IRQHandler +HRTIM1_FLT_IRQHandler +DFSDM1_FLT0_IRQHandler +DFSDM1_FLT1_IRQHandler +DFSDM1_FLT2_IRQHandler +DFSDM1_FLT3_IRQHandler +SAI3_IRQHandler +SWPMI1_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +MDIOS_WKUP_IRQHandler +MDIOS_IRQHandler +JPEG_IRQHandler +MDMA_IRQHandler +DSI_IRQHandler +SDMMC2_IRQHandler +HSEM1_IRQHandler +HSEM2_IRQHandler +ADC3_IRQHandler +DMAMUX2_OVR_IRQHandler +BDMA_Channel0_IRQHandler +BDMA_Channel1_IRQHandler +BDMA_Channel2_IRQHandler +BDMA_Channel3_IRQHandler +BDMA_Channel4_IRQHandler +BDMA_Channel5_IRQHandler +BDMA_Channel6_IRQHandler +BDMA_Channel7_IRQHandler +COMP1_IRQHandler +LPTIM2_IRQHandler +LPTIM3_IRQHandler +LPTIM4_IRQHandler +LPTIM5_IRQHandler +LPUART1_IRQHandler +WWDG_RST_IRQHandler +CRS_IRQHandler +ECC_IRQHandler +SAI4_IRQHandler +HOLD_CORE_IRQHandler +WAKEUP_PIN_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM7.s b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM7.s new file mode 100644 index 0000000..2c9ed0a --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/startup_stm32h747xx_CM7.s @@ -0,0 +1,621 @@ +;******************************************************************************** +;* File Name : startup_stm32h747xx.s +;* @author MCD Application Team +;* Description : STM32H7xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;****************************************************************************** +;* @attention +;* +;* Copyright (c) 2019 STMicroelectronics. +;* All rights reserved. +;* +;* This software is licensed under terms that can be found in the LICENSE file +;* in the root directory of this software component. +;* If no LICENSE file comes with this software, it is provided AS-IS. +;* +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog interrupt ( wwdg1_it, wwdg2_it) + DCD PVD_AVD_IRQHandler ; PVD/AVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 + DCD FDCAN1_IT0_IRQHandler ; FDCAN1 interrupt line 0 + DCD FDCAN2_IT0_IRQHandler ; FDCAN2 interrupt line 0 + DCD FDCAN1_IT1_IRQHandler ; FDCAN1 interrupt line 1 + DCD FDCAN2_IT1_IRQHandler ; FDCAN2 interrupt line 1 + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_IRQHandler ; TIM1 Break interrupt + DCD TIM1_UP_IRQHandler ; TIM1 Update Interrupt + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation Interrupt + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10] + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD 0 ; Reserved + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break Interrupt and TIM12 global interrupt + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update Interrupt and TIM13 global interrupt + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare Interrupt + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD ETH_IRQHandler ; Ethernet + DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line + DCD FDCAN_CAL_IRQHandler ; FDCAN calibration unit interrupt + DCD CM7_SEV_IRQHandler ; CM7 Send event interrupt for CM4 + DCD CM4_SEV_IRQHandler ; CM4 Send event interrupt for CM7 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out + DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In + DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI + DCD OTG_HS_IRQHandler ; USB OTG HS + DCD DCMI_IRQHandler ; DCMI + DCD 0 ; Reserved + DCD RNG_IRQHandler ; Rng + DCD FPU_IRQHandler ; FPU + DCD UART7_IRQHandler ; UART7 + DCD UART8_IRQHandler ; UART8 + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + DCD SPI6_IRQHandler ; SPI6 + DCD SAI1_IRQHandler ; SAI1 + DCD LTDC_IRQHandler ; LTDC + DCD LTDC_ER_IRQHandler ; LTDC error + DCD DMA2D_IRQHandler ; DMA2D + DCD SAI2_IRQHandler ; SAI2 + DCD QUADSPI_IRQHandler ; QUADSPI + DCD LPTIM1_IRQHandler ; LPTIM1 + DCD CEC_IRQHandler ; HDMI_CEC + DCD I2C4_EV_IRQHandler ; I2C4 Event + DCD I2C4_ER_IRQHandler ; I2C4 Error + DCD SPDIF_RX_IRQHandler ; SPDIF_RX + DCD OTG_FS_EP1_OUT_IRQHandler ; USB OTG FS End Point 1 Out + DCD OTG_FS_EP1_IN_IRQHandler ; USB OTG FS End Point 1 In + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMAMUX1_OVR_IRQHandler ; DMAMUX1 Overrun interrupt + DCD HRTIM1_Master_IRQHandler ; HRTIM Master Timer global Interrupts + DCD HRTIM1_TIMA_IRQHandler ; HRTIM Timer A global Interrupt + DCD HRTIM1_TIMB_IRQHandler ; HRTIM Timer B global Interrupt + DCD HRTIM1_TIMC_IRQHandler ; HRTIM Timer C global Interrupt + DCD HRTIM1_TIMD_IRQHandler ; HRTIM Timer D global Interrupt + DCD HRTIM1_TIME_IRQHandler ; HRTIM Timer E global Interrupt + DCD HRTIM1_FLT_IRQHandler ; HRTIM Fault global Interrupt + DCD DFSDM1_FLT0_IRQHandler ; DFSDM Filter0 Interrupt + DCD DFSDM1_FLT1_IRQHandler ; DFSDM Filter1 Interrupt + DCD DFSDM1_FLT2_IRQHandler ; DFSDM Filter2 Interrupt + DCD DFSDM1_FLT3_IRQHandler ; DFSDM Filter3 Interrupt + DCD SAI3_IRQHandler ; SAI3 global Interrupt + DCD SWPMI1_IRQHandler ; Serial Wire Interface 1 global interrupt + DCD TIM15_IRQHandler ; TIM15 global Interrupt + DCD TIM16_IRQHandler ; TIM16 global Interrupt + DCD TIM17_IRQHandler ; TIM17 global Interrupt + DCD MDIOS_WKUP_IRQHandler ; MDIOS Wakeup Interrupt + DCD MDIOS_IRQHandler ; MDIOS global Interrupt + DCD JPEG_IRQHandler ; JPEG global Interrupt + DCD MDMA_IRQHandler ; MDMA global Interrupt + DCD DSI_IRQHandler ; DSI global Interrupt + DCD SDMMC2_IRQHandler ; SDMMC2 global Interrupt + DCD HSEM1_IRQHandler ; HSEM1 global Interrupt + DCD HSEM2_IRQHandler ; HSEM2 global Interrupt + DCD ADC3_IRQHandler ; ADC3 global Interrupt + DCD DMAMUX2_OVR_IRQHandler ; DMAMUX Overrun interrupt + DCD BDMA_Channel0_IRQHandler ; BDMA Channel 0 global Interrupt + DCD BDMA_Channel1_IRQHandler ; BDMA Channel 1 global Interrupt + DCD BDMA_Channel2_IRQHandler ; BDMA Channel 2 global Interrupt + DCD BDMA_Channel3_IRQHandler ; BDMA Channel 3 global Interrupt + DCD BDMA_Channel4_IRQHandler ; BDMA Channel 4 global Interrupt + DCD BDMA_Channel5_IRQHandler ; BDMA Channel 5 global Interrupt + DCD BDMA_Channel6_IRQHandler ; BDMA Channel 6 global Interrupt + DCD BDMA_Channel7_IRQHandler ; BDMA Channel 7 global Interrupt + DCD COMP1_IRQHandler ; COMP1 global Interrupt + DCD LPTIM2_IRQHandler ; LP TIM2 global interrupt + DCD LPTIM3_IRQHandler ; LP TIM3 global interrupt + DCD LPTIM4_IRQHandler ; LP TIM4 global interrupt + DCD LPTIM5_IRQHandler ; LP TIM5 global interrupt + DCD LPUART1_IRQHandler ; LP UART1 interrupt + DCD WWDG_RST_IRQHandler ; Window Watchdog reset interrupt (exti_d2_wwdg_it, exti_d1_wwdg_it) + DCD CRS_IRQHandler ; Clock Recovery Global Interrupt + DCD ECC_IRQHandler ; ECC diagnostic Global Interrupt + DCD SAI4_IRQHandler ; SAI4 global interrupt + DCD 0 ; Reserved + DCD HOLD_CORE_IRQHandler ; Hold core interrupt + DCD WAKEUP_PIN_IRQHandler ; Interrupt for all 6 wake-up pins + + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_AVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT FDCAN1_IT0_IRQHandler [WEAK] + EXPORT FDCAN2_IT0_IRQHandler [WEAK] + EXPORT FDCAN1_IT1_IRQHandler [WEAK] + EXPORT FDCAN2_IT1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] + EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT SDMMC1_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT ETH_IRQHandler [WEAK] + EXPORT ETH_WKUP_IRQHandler [WEAK] + EXPORT FDCAN_CAL_IRQHandler [WEAK] + EXPORT CM7_SEV_IRQHandler [WEAK] + EXPORT CM4_SEV_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK] + EXPORT OTG_HS_WKUP_IRQHandler [WEAK] + EXPORT OTG_HS_IRQHandler [WEAK] + EXPORT DCMI_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT UART7_IRQHandler [WEAK] + EXPORT UART8_IRQHandler [WEAK] + EXPORT SPI4_IRQHandler [WEAK] + EXPORT SPI5_IRQHandler [WEAK] + EXPORT SPI6_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT LTDC_IRQHandler [WEAK] + EXPORT LTDC_ER_IRQHandler [WEAK] + EXPORT DMA2D_IRQHandler [WEAK] + EXPORT SAI2_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT I2C4_EV_IRQHandler [WEAK] + EXPORT I2C4_ER_IRQHandler [WEAK] + EXPORT SPDIF_RX_IRQHandler [WEAK] + EXPORT OTG_FS_EP1_OUT_IRQHandler [WEAK] + EXPORT OTG_FS_EP1_IN_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMAMUX1_OVR_IRQHandler [WEAK] + EXPORT HRTIM1_Master_IRQHandler [WEAK] + EXPORT HRTIM1_TIMA_IRQHandler [WEAK] + EXPORT HRTIM1_TIMB_IRQHandler [WEAK] + EXPORT HRTIM1_TIMC_IRQHandler [WEAK] + EXPORT HRTIM1_TIMD_IRQHandler [WEAK] + EXPORT HRTIM1_TIME_IRQHandler [WEAK] + EXPORT HRTIM1_FLT_IRQHandler [WEAK] + EXPORT DFSDM1_FLT0_IRQHandler [WEAK] + EXPORT DFSDM1_FLT1_IRQHandler [WEAK] + EXPORT DFSDM1_FLT2_IRQHandler [WEAK] + EXPORT DFSDM1_FLT3_IRQHandler [WEAK] + EXPORT SAI3_IRQHandler [WEAK] + EXPORT SWPMI1_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT MDIOS_WKUP_IRQHandler [WEAK] + EXPORT MDIOS_IRQHandler [WEAK] + EXPORT JPEG_IRQHandler [WEAK] + EXPORT MDMA_IRQHandler [WEAK] + EXPORT DSI_IRQHandler [WEAK] + EXPORT SDMMC2_IRQHandler [WEAK] + EXPORT HSEM1_IRQHandler [WEAK] + EXPORT HSEM2_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT DMAMUX2_OVR_IRQHandler [WEAK] + EXPORT BDMA_Channel0_IRQHandler [WEAK] + EXPORT BDMA_Channel1_IRQHandler [WEAK] + EXPORT BDMA_Channel2_IRQHandler [WEAK] + EXPORT BDMA_Channel3_IRQHandler [WEAK] + EXPORT BDMA_Channel4_IRQHandler [WEAK] + EXPORT BDMA_Channel5_IRQHandler [WEAK] + EXPORT BDMA_Channel6_IRQHandler [WEAK] + EXPORT BDMA_Channel7_IRQHandler [WEAK] + EXPORT COMP1_IRQHandler [WEAK] + EXPORT LPTIM2_IRQHandler [WEAK] + EXPORT LPTIM3_IRQHandler [WEAK] + EXPORT LPTIM4_IRQHandler [WEAK] + EXPORT LPTIM5_IRQHandler [WEAK] + EXPORT LPUART1_IRQHandler [WEAK] + EXPORT WWDG_RST_IRQHandler [WEAK] + EXPORT CRS_IRQHandler [WEAK] + EXPORT ECC_IRQHandler [WEAK] + EXPORT SAI4_IRQHandler [WEAK] + EXPORT HOLD_CORE_IRQHandler [WEAK] + EXPORT WAKEUP_PIN_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_AVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +FDCAN1_IT0_IRQHandler +FDCAN2_IT0_IRQHandler +FDCAN1_IT1_IRQHandler +FDCAN2_IT1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +TIM8_BRK_TIM12_IRQHandler +TIM8_UP_TIM13_IRQHandler +TIM8_TRG_COM_TIM14_IRQHandler +TIM8_CC_IRQHandler +DMA1_Stream7_IRQHandler +FMC_IRQHandler +SDMMC1_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +ETH_IRQHandler +ETH_WKUP_IRQHandler +FDCAN_CAL_IRQHandler +CM7_SEV_IRQHandler +CM4_SEV_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +OTG_HS_EP1_OUT_IRQHandler +OTG_HS_EP1_IN_IRQHandler +OTG_HS_WKUP_IRQHandler +OTG_HS_IRQHandler +DCMI_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +UART7_IRQHandler +UART8_IRQHandler +SPI4_IRQHandler +SPI5_IRQHandler +SPI6_IRQHandler +SAI1_IRQHandler +LTDC_IRQHandler +LTDC_ER_IRQHandler +DMA2D_IRQHandler +SAI2_IRQHandler +QUADSPI_IRQHandler +LPTIM1_IRQHandler +CEC_IRQHandler +I2C4_EV_IRQHandler +I2C4_ER_IRQHandler +SPDIF_RX_IRQHandler +OTG_FS_EP1_OUT_IRQHandler +OTG_FS_EP1_IN_IRQHandler +OTG_FS_WKUP_IRQHandler +OTG_FS_IRQHandler +DMAMUX1_OVR_IRQHandler +HRTIM1_Master_IRQHandler +HRTIM1_TIMA_IRQHandler +HRTIM1_TIMB_IRQHandler +HRTIM1_TIMC_IRQHandler +HRTIM1_TIMD_IRQHandler +HRTIM1_TIME_IRQHandler +HRTIM1_FLT_IRQHandler +DFSDM1_FLT0_IRQHandler +DFSDM1_FLT1_IRQHandler +DFSDM1_FLT2_IRQHandler +DFSDM1_FLT3_IRQHandler +SAI3_IRQHandler +SWPMI1_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +MDIOS_WKUP_IRQHandler +MDIOS_IRQHandler +JPEG_IRQHandler +MDMA_IRQHandler +DSI_IRQHandler +SDMMC2_IRQHandler +HSEM1_IRQHandler +HSEM2_IRQHandler +ADC3_IRQHandler +DMAMUX2_OVR_IRQHandler +BDMA_Channel0_IRQHandler +BDMA_Channel1_IRQHandler +BDMA_Channel2_IRQHandler +BDMA_Channel3_IRQHandler +BDMA_Channel4_IRQHandler +BDMA_Channel5_IRQHandler +BDMA_Channel6_IRQHandler +BDMA_Channel7_IRQHandler +COMP1_IRQHandler +LPTIM2_IRQHandler +LPTIM3_IRQHandler +LPTIM4_IRQHandler +LPTIM5_IRQHandler +LPUART1_IRQHandler +WWDG_RST_IRQHandler +CRS_IRQHandler +ECC_IRQHandler +SAI4_IRQHandler +HOLD_CORE_IRQHandler +WAKEUP_PIN_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_flash_CM4.sct b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_flash_CM4.sct new file mode 100644 index 0000000..ae5556b --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_flash_CM4.sct @@ -0,0 +1,14 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08100000 0x00100000 { ; load region size_region + ER_IROM1 0x08100000 0x00100000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x10000000 0x00048000{ ; RW data + .ANY (+RW +ZI) + } +} diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_flash_CM7.sct b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_flash_CM7.sct new file mode 100644 index 0000000..3c1ccf3 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_flash_CM7.sct @@ -0,0 +1,14 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00100000 { ; load region size_region + ER_IROM1 0x08000000 0x00100000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x20000000 0x00020000{ ; RW data + .ANY (+RW +ZI) + } +} diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_sram1_CM7.sct b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_sram1_CM7.sct new file mode 100644 index 0000000..e756dbc --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_sram1_CM7.sct @@ -0,0 +1,14 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x24000000 0x00040000 { ; load region size_region + ER_IROM1 0x24000000 0x00040000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x24040000 0x00040000{ ; RW data + .ANY (+RW +ZI) + } +} diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_sram2_CM4.sct b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_sram2_CM4.sct new file mode 100644 index 0000000..db51c42 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/MDK-ARM/stm32h747xx_sram2_CM4.sct @@ -0,0 +1,14 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x10000000 0x00020000 { ; load region size_region + ER_IROM1 0x10000000 0x00020000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x10020000 0x00028000{ ; RW data + .ANY (+RW +ZI) + } +} diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/STM32CubeMX.ioc b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/STM32CubeMX.ioc new file mode 100644 index 0000000..036a83a --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/STM32CubeMX/STM32CubeMX.ioc @@ -0,0 +1,1328 @@ +#MicroXplorer Configuration settings - do not modify +CAD.formats= +CAD.pinconfig= +CAD.provider= +CortexM4.IPs=FATFS_M4\:I,FREERTOS_M4\:I,IWDG2\:I,RCC,USB_DEVICE_M4\:I,USB_HOST_M4\:I,WWDG2\:I,DMA,BDMA,MDMA,NVIC2\:I,DFSDM1\:I,ETH\:I,FMC,I2C1,QUADSPI,SAI1,SAI4,SDMMC1,DEBUG,PDM2PCM_M4\:I,PWR,RESMGR_UTILITY,SYS_M4\:I,CORTEX_M4\:I,OPENAMP_M4\:I,VREFBUF,GPIO,USART1 +CortexM7.IPs=FATFS_M7\:I,FREERTOS_M7\:I,IWDG1\:I,RCC\:I,USB_DEVICE_M7\:I,USB_HOST_M7\:I,WWDG1\:I,DMA\:I,BDMA\:I,MDMA\:I,NVIC1\:I,FMC\:I,I2C1\:I,LTDC\:I,DSIHOST\:I,QUADSPI\:I,SAI1\:I,SAI4\:I,SDMMC1\:I,SYS\:I,USART1\:I,USB_OTG_FS\:I,USB_OTG_HS\:I,CORTEX_M7\:I,DEBUG\:I,ETH,DFSDM1,PDM2PCM_M7\:I,PWR\:I,RESMGR_UTILITY\:I,OPENAMP_M7\:I,VREFBUF\:I,GPIO\:I,TIM17\:I +DSI_CKN.GPIOParameters=PinAttribute +DSI_CKN.Locked=true +DSI_CKN.Mode=DSIHost_Adapted_TE +DSI_CKN.PinAttribute=CortexM7 +DSI_CKN.Signal=DSIHOST_CKN +DSI_CKP.GPIOParameters=PinAttribute +DSI_CKP.Locked=true +DSI_CKP.Mode=DSIHost_Adapted_TE +DSI_CKP.PinAttribute=CortexM7 +DSI_CKP.Signal=DSIHOST_CKP +DSI_D0N.GPIOParameters=PinAttribute +DSI_D0N.Locked=true +DSI_D0N.Mode=DSIHost_Adapted_TE +DSI_D0N.PinAttribute=CortexM7 +DSI_D0N.Signal=DSIHOST_D0N +DSI_D0P.GPIOParameters=PinAttribute +DSI_D0P.Locked=true +DSI_D0P.Mode=DSIHost_Adapted_TE +DSI_D0P.PinAttribute=CortexM7 +DSI_D0P.Signal=DSIHOST_D0P +DSI_D1N.GPIOParameters=PinAttribute +DSI_D1N.Locked=true +DSI_D1N.Mode=DSIHost_Adapted_TE +DSI_D1N.PinAttribute=CortexM7 +DSI_D1N.Signal=DSIHOST_D1N +DSI_D1P.GPIOParameters=PinAttribute +DSI_D1P.Locked=true +DSI_D1P.Mode=DSIHost_Adapted_TE +DSI_D1P.PinAttribute=CortexM7 +DSI_D1P.Signal=DSIHOST_D1P +ETH.IPParameters=MediaInterface +ETH.MediaInterface=HAL_ETH_RMII_MODE +File.Version=6 +GPIO.groupedBy=Group By Peripherals +I2C1.IPParameters=Timing +I2C1.Timing=0x109093DC +KeepUserPlacement=false +Mcu.CPN=STM32H747XIH6 +Mcu.Context0=CortexM7 +Mcu.Context1=CortexM4 +Mcu.ContextNb=2 +Mcu.Family=STM32H7 +Mcu.IP0=CORTEX_M4 +Mcu.IP1=CORTEX_M7 +Mcu.IP10=QUADSPI +Mcu.IP11=RCC +Mcu.IP12=SAI1 +Mcu.IP13=SDMMC1 +Mcu.IP14=SYS +Mcu.IP15=SYS_M4 +Mcu.IP16=USART1 +Mcu.IP17=USB_OTG_FS +Mcu.IP18=USB_OTG_HS +Mcu.IP2=DFSDM1 +Mcu.IP3=DSIHOST +Mcu.IP4=ETH +Mcu.IP5=FMC +Mcu.IP6=I2C1 +Mcu.IP7=LTDC +Mcu.IP8=NVIC1 +Mcu.IP9=NVIC2 +Mcu.IPNb=19 +Mcu.Name=STM32H747XIHx +Mcu.Package=TFBGA240 +Mcu.Pin0=PI6 +Mcu.Pin1=PI5 +Mcu.Pin10=PI1 +Mcu.Pin100=PH10 +Mcu.Pin101=PH11 +Mcu.Pin102=PD15 +Mcu.Pin103=PD14 +Mcu.Pin104=PA6 +Mcu.Pin105=PA7 +Mcu.Pin106=PB2 +Mcu.Pin107=PF12 +Mcu.Pin108=PF15 +Mcu.Pin109=PE12 +Mcu.Pin11=PI0 +Mcu.Pin110=PE15 +Mcu.Pin111=PH9 +Mcu.Pin112=PH12 +Mcu.Pin113=PD11 +Mcu.Pin114=PD12 +Mcu.Pin115=PD13 +Mcu.Pin116=PA5 +Mcu.Pin117=PC4 +Mcu.Pin118=PB1 +Mcu.Pin119=PF11 +Mcu.Pin12=PI7 +Mcu.Pin120=PG0 +Mcu.Pin121=PE8 +Mcu.Pin122=PE13 +Mcu.Pin123=PH6 +Mcu.Pin124=PH8 +Mcu.Pin125=PB12 +Mcu.Pin126=PB15 +Mcu.Pin127=PD10 +Mcu.Pin128=PD9 +Mcu.Pin129=PA3 +Mcu.Pin13=PE1 +Mcu.Pin130=PA4 +Mcu.Pin131=PC5 +Mcu.Pin132=PB0 +Mcu.Pin133=PG1 +Mcu.Pin134=PE7 +Mcu.Pin135=PE14 +Mcu.Pin136=PH7 +Mcu.Pin137=PB13 +Mcu.Pin138=PB14 +Mcu.Pin139=PD8 +Mcu.Pin14=PB6 +Mcu.Pin140=VP_LTDC_DSIMode +Mcu.Pin141=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC +Mcu.Pin142=VP_SYS_VS_tim17 +Mcu.Pin143=VP_SYS_M4_VS_Systick +Mcu.Pin15=PG11 +Mcu.Pin16=PD6 +Mcu.Pin17=PD3 +Mcu.Pin18=PC11 +Mcu.Pin19=PI2 +Mcu.Pin2=PI4 +Mcu.Pin20=PH15 +Mcu.Pin21=PH14 +Mcu.Pin22=PC15-OSC32_OUT (OSC32_OUT) +Mcu.Pin23=PC14-OSC32_IN (OSC32_IN) +Mcu.Pin24=PE2 +Mcu.Pin25=PE0 +Mcu.Pin26=PB7 +Mcu.Pin27=PG12 +Mcu.Pin28=PD7 +Mcu.Pin29=PC12 +Mcu.Pin3=PB5 +Mcu.Pin30=PI3 +Mcu.Pin31=PE5 +Mcu.Pin32=PE4 +Mcu.Pin33=PE3 +Mcu.Pin34=PB9 +Mcu.Pin35=PB8 +Mcu.Pin36=PG15 +Mcu.Pin37=PG14 +Mcu.Pin38=PG13 +Mcu.Pin39=PD2 +Mcu.Pin4=PG10 +Mcu.Pin40=PD0 +Mcu.Pin41=PA9 +Mcu.Pin42=PH13 +Mcu.Pin43=PI9 +Mcu.Pin44=PC13 +Mcu.Pin45=PI8 +Mcu.Pin46=PE6 +Mcu.Pin47=PD1 +Mcu.Pin48=PC8 +Mcu.Pin49=PC9 +Mcu.Pin5=PG9 +Mcu.Pin50=PA8 +Mcu.Pin51=PA12 +Mcu.Pin52=PA11 +Mcu.Pin53=PI10 +Mcu.Pin54=PI11 +Mcu.Pin55=PC7 +Mcu.Pin56=PC6 +Mcu.Pin57=PG8 +Mcu.Pin58=PG7 +Mcu.Pin59=PF2 +Mcu.Pin6=PD5 +Mcu.Pin60=PF1 +Mcu.Pin61=PF0 +Mcu.Pin62=PG5 +Mcu.Pin63=PG6 +Mcu.Pin64=PF3 +Mcu.Pin65=PG4 +Mcu.Pin66=PG3 +Mcu.Pin67=PG2 +Mcu.Pin68=PH1-OSC_OUT (PH1) +Mcu.Pin69=PH0-OSC_IN (PH0) +Mcu.Pin7=PD4 +Mcu.Pin70=PF5 +Mcu.Pin71=PF4 +Mcu.Pin72=PF6 +Mcu.Pin73=PF7 +Mcu.Pin74=PF8 +Mcu.Pin75=DSI_D1P +Mcu.Pin76=DSI_D1N +Mcu.Pin77=PC0 +Mcu.Pin78=PF10 +Mcu.Pin79=PF9 +Mcu.Pin8=PC10 +Mcu.Pin80=DSI_CKP +Mcu.Pin81=DSI_CKN +Mcu.Pin82=PC1 +Mcu.Pin83=PC2 +Mcu.Pin84=PC3 +Mcu.Pin85=DSI_D0P +Mcu.Pin86=DSI_D0N +Mcu.Pin87=PH2 +Mcu.Pin88=PA2 +Mcu.Pin89=PA1 +Mcu.Pin9=PA15 (JTDI) +Mcu.Pin90=PE10 +Mcu.Pin91=PH3 +Mcu.Pin92=PH4 +Mcu.Pin93=PH5 +Mcu.Pin94=PF13 +Mcu.Pin95=PF14 +Mcu.Pin96=PE9 +Mcu.Pin97=PE11 +Mcu.Pin98=PB10 +Mcu.Pin99=PB11 +Mcu.PinsNb=144 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32H747XIHx +MxCube.Version=6.12.1 +MxDb.Version=DB.6.0.121 +NVIC1.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC1.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC1.ForceEnableDMAVector=true +NVIC1.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC1.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC1.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC1.PendSV_IRQn=true\:0\:0\:false\:false\:false\:true\:false\:false +NVIC1.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC1.SVCall_IRQn=true\:0\:0\:false\:false\:false\:true\:false\:false +NVIC1.SysTick_IRQn=true\:0\:0\:false\:false\:false\:true\:true\:false +NVIC1.TIM17_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:true +NVIC1.TimeBase=TIM17_IRQn +NVIC1.TimeBaseIP=TIM17 +NVIC1.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true +NVIC1.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC2.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC2.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC2.ForceEnableDMAVector=true +NVIC2.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC2.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC2.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC2.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC2.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC2.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC2.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false +NVIC2.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +PA1.GPIOParameters=GPIO_Label,PinAttribute +PA1.GPIO_Label=RMII_REF_CLK [LAN8742A_REFCLK0] +PA1.Locked=true +PA1.Mode=RMII +PA1.PinAttribute=CortexM4 +PA1.Signal=ETH_REF_CLK +PA11.GPIOParameters=GPIO_Label,PinAttribute +PA11.GPIO_Label=USB_FS2_DM +PA11.Locked=true +PA11.Mode=Device_Only +PA11.PinAttribute=CortexM7 +PA11.Signal=USB_OTG_FS_DM +PA12.GPIOParameters=GPIO_Label,PinAttribute +PA12.GPIO_Label=USB_FS2_DP +PA12.Locked=true +PA12.Mode=Device_Only +PA12.PinAttribute=CortexM7 +PA12.Signal=USB_OTG_FS_DP +PA15\ (JTDI).GPIOParameters=PinAttribute +PA15\ (JTDI).Mode=DSIHost_Adapted_TE +PA15\ (JTDI).PinAttribute=CortexM7 +PA15\ (JTDI).Signal=DSIHOST_TE +PA2.GPIOParameters=GPIO_Label,PinAttribute +PA2.GPIO_Label=RMII_MDIO [LAN8742A_MDIO] +PA2.Locked=true +PA2.Mode=RMII +PA2.PinAttribute=CortexM4 +PA2.Signal=ETH_MDIO +PA3.GPIOParameters=GPIO_Label,PinAttribute +PA3.GPIO_Label=ULPI_D0 [USB3320C_D0] +PA3.Locked=true +PA3.Mode=Device_HS +PA3.PinAttribute=CortexM7 +PA3.Signal=USB_OTG_HS_ULPI_D0 +PA4.GPIOParameters=GPIO_Label,PinAttribute +PA4.GPIO_Label=EXT_RESET +PA4.Locked=true +PA4.PinAttribute=Free +PA4.Signal=GPIO_Output +PA5.GPIOParameters=GPIO_Label,PinAttribute +PA5.GPIO_Label=ULPI_CK [USB3320C_CLKOUT] +PA5.Locked=true +PA5.Mode=Device_HS +PA5.PinAttribute=CortexM7 +PA5.Signal=USB_OTG_HS_ULPI_CK +PA6.GPIOParameters=GPIO_Label,PinAttribute +PA6.GPIO_Label=LCD_BL_CTRL +PA6.Locked=true +PA6.PinAttribute=Free +PA6.Signal=GPIO_Output +PA7.GPIOParameters=GPIO_Label,PinAttribute +PA7.GPIO_Label=RMII_CRS_DV [LAN8742A_CRS_DV] +PA7.Locked=true +PA7.Mode=RMII +PA7.PinAttribute=CortexM4 +PA7.Signal=ETH_CRS_DV +PA8.GPIOParameters=GPIO_Label,PinAttribute +PA8.GPIO_Label=MCO1 +PA8.Locked=true +PA8.Mode=Clock-out-1 +PA8.PinAttribute=CortexM7 +PA8.Signal=RCC_MCO_1 +PA9.GPIOParameters=GPIO_Label,PinAttribute +PA9.GPIO_Label=USB_FS2_VBUS +PA9.Locked=true +PA9.Mode=Activate_VBUS +PA9.PinAttribute=CortexM7 +PA9.Signal=USB_OTG_FS_VBUS +PB0.GPIOParameters=GPIO_Label,PinAttribute +PB0.GPIO_Label=ULPI_D1 [USB3320C_D1] +PB0.Locked=true +PB0.Mode=Device_HS +PB0.PinAttribute=CortexM7 +PB0.Signal=USB_OTG_HS_ULPI_D1 +PB1.GPIOParameters=GPIO_Label,PinAttribute +PB1.GPIO_Label=ULPI_D2 [USB3320C_D2] +PB1.Locked=true +PB1.Mode=Device_HS +PB1.PinAttribute=CortexM7 +PB1.Signal=USB_OTG_HS_ULPI_D2 +PB10.GPIOParameters=GPIO_Label,PinAttribute +PB10.GPIO_Label=ULPI_D3 [USB3320C_D3] +PB10.Locked=true +PB10.Mode=Device_HS +PB10.PinAttribute=CortexM7 +PB10.Signal=USB_OTG_HS_ULPI_D3 +PB11.GPIOParameters=GPIO_Label,PinAttribute +PB11.GPIO_Label=ULPI_D4 [USB3320C_D4] +PB11.Locked=true +PB11.Mode=Device_HS +PB11.PinAttribute=CortexM7 +PB11.Signal=USB_OTG_HS_ULPI_D4 +PB12.GPIOParameters=GPIO_Label,PinAttribute +PB12.GPIO_Label=ULPI_D5 [USB3320C_D5] +PB12.Locked=true +PB12.Mode=Device_HS +PB12.PinAttribute=CortexM7 +PB12.Signal=USB_OTG_HS_ULPI_D5 +PB13.GPIOParameters=GPIO_Label,PinAttribute +PB13.GPIO_Label=ULPI_D6 [USB3320C_D6] +PB13.Locked=true +PB13.Mode=Device_HS +PB13.PinAttribute=CortexM7 +PB13.Signal=USB_OTG_HS_ULPI_D6 +PB14.GPIOParameters=GPIO_Label,PinAttribute +PB14.GPIO_Label=RS232_TX [ST3241EBPR_T2IN] +PB14.Locked=true +PB14.Mode=Asynchronous +PB14.PinAttribute=CortexM7 +PB14.Signal=USART1_TX +PB15.GPIOParameters=GPIO_Label,PinAttribute +PB15.GPIO_Label=RS_232RX [ST3241EBPR_R3OUT] +PB15.Locked=true +PB15.Mode=Asynchronous +PB15.PinAttribute=CortexM7 +PB15.Signal=USART1_RX +PB2.GPIOParameters=GPIO_Label,PinAttribute +PB2.GPIO_Label=QSPI_CLK [MT25TL01GHBA8ESF_CLK_1] +PB2.Locked=true +PB2.Mode=Dual_Bank +PB2.PinAttribute=CortexM7 +PB2.Signal=QUADSPI_CLK +PB5.GPIOParameters=GPIO_Label,PinAttribute +PB5.GPIO_Label=ULPI_D7 [USB3320C_D7] +PB5.Locked=true +PB5.Mode=Device_HS +PB5.PinAttribute=CortexM7 +PB5.Signal=USB_OTG_HS_ULPI_D7 +PB6.GPIOParameters=GPIO_Label,GPIO_Pu,PinAttribute +PB6.GPIO_Label=I2C1_SCL [STM32L152CCT6_I2C_SCL] +PB6.GPIO_Pu=GPIO_PULLUP +PB6.Locked=true +PB6.Mode=I2C +PB6.PinAttribute=CortexM7 +PB6.Signal=I2C1_SCL +PB7.GPIOParameters=GPIO_Label,GPIO_Pu,PinAttribute +PB7.GPIO_Label=I2C1_SDA [STM32L152CCT6_I2C_SDA] +PB7.GPIO_Pu=GPIO_PULLUP +PB7.Locked=true +PB7.Mode=I2C +PB7.PinAttribute=CortexM7 +PB7.Signal=I2C1_SDA +PB8.GPIOParameters=GPIO_Label,PinAttribute +PB8.GPIO_Label=SDIO1_CKIN +PB8.Locked=true +PB8.Mode=SD_4_bits_Wide_bus_auto_dir_voltage_converter +PB8.PinAttribute=CortexM7 +PB8.Signal=SDMMC1_CKIN +PB9.GPIOParameters=GPIO_Label,PinAttribute +PB9.GPIO_Label=SDIO1_CDIR +PB9.Locked=true +PB9.Mode=SD_4_bits_Wide_bus_dir_voltage_converter +PB9.PinAttribute=CortexM7 +PB9.Signal=SDMMC1_CDIR +PC0.GPIOParameters=GPIO_Label,PinAttribute +PC0.GPIO_Label=ULPI_STP [USB3320C_STP] +PC0.Locked=true +PC0.Mode=Device_HS +PC0.PinAttribute=CortexM7 +PC0.Signal=USB_OTG_HS_ULPI_STP +PC1.GPIOParameters=GPIO_Label,PinAttribute +PC1.GPIO_Label=RMII_MDC [LAN8742A_MDC] +PC1.Locked=true +PC1.Mode=RMII +PC1.PinAttribute=CortexM4 +PC1.Signal=ETH_MDC +PC10.GPIOParameters=GPIO_Label,PinAttribute +PC10.GPIO_Label=SDIO1_D2 +PC10.Locked=true +PC10.Mode=SD_4_bits_Wide_bus_auto_dir_voltage_converter +PC10.PinAttribute=CortexM7 +PC10.Signal=SDMMC1_D2 +PC11.GPIOParameters=GPIO_Label,PinAttribute +PC11.GPIO_Label=SDIO1_D3 +PC11.Locked=true +PC11.Mode=SD_4_bits_Wide_bus_auto_dir_voltage_converter +PC11.PinAttribute=CortexM7 +PC11.Signal=SDMMC1_D3 +PC12.GPIOParameters=GPIO_Label,PinAttribute +PC12.GPIO_Label=SDIO1_CLK +PC12.Locked=true +PC12.Mode=SD_4_bits_Wide_bus_auto_dir_voltage_converter +PC12.PinAttribute=CortexM7 +PC12.Signal=SDMMC1_CK +PC13.GPIOParameters=GPIO_Label,PinAttribute +PC13.GPIO_Label=B3 [Tamper Key Button] +PC13.Locked=true +PC13.PinAttribute=Free +PC13.Signal=GPIO_Input +PC14-OSC32_IN\ (OSC32_IN).GPIOParameters=GPIO_Label,PinAttribute +PC14-OSC32_IN\ (OSC32_IN).GPIO_Label=OSC32_IN +PC14-OSC32_IN\ (OSC32_IN).Locked=true +PC14-OSC32_IN\ (OSC32_IN).Mode=LSE-External-Oscillator +PC14-OSC32_IN\ (OSC32_IN).PinAttribute=CortexM7 +PC14-OSC32_IN\ (OSC32_IN).Signal=RCC_OSC32_IN +PC15-OSC32_OUT\ (OSC32_OUT).GPIOParameters=GPIO_Label,PinAttribute +PC15-OSC32_OUT\ (OSC32_OUT).GPIO_Label=OSC32_OUT +PC15-OSC32_OUT\ (OSC32_OUT).Locked=true +PC15-OSC32_OUT\ (OSC32_OUT).Mode=LSE-External-Oscillator +PC15-OSC32_OUT\ (OSC32_OUT).PinAttribute=CortexM7 +PC15-OSC32_OUT\ (OSC32_OUT).Signal=RCC_OSC32_OUT +PC2.GPIOParameters=GPIO_Label,PinAttribute +PC2.GPIO_Label=DFSDM_CLK +PC2.Locked=true +PC2.PinAttribute=CortexM4 +PC2.Signal=S_CKOUTDFSDM1 +PC3.GPIOParameters=GPIO_Label,PinAttribute +PC3.GPIO_Label=DFSM_DAT1 +PC3.Locked=true +PC3.PinAttribute=CortexM4 +PC3.Signal=S_DATAIN1DFSDM1 +PC4.GPIOParameters=GPIO_Label,PinAttribute +PC4.GPIO_Label=RMII_RXD0 [LAN8742A_RXD0] +PC4.Locked=true +PC4.Mode=RMII +PC4.PinAttribute=CortexM4 +PC4.Signal=ETH_RXD0 +PC5.GPIOParameters=GPIO_Label,PinAttribute +PC5.GPIO_Label=RMII_RXD1 [LAN8742A_RXD1] +PC5.Locked=true +PC5.Mode=RMII +PC5.PinAttribute=CortexM4 +PC5.Signal=ETH_RXD1 +PC6.GPIOParameters=GPIO_Label,PinAttribute +PC6.GPIO_Label=SDIO1_D0DIR +PC6.Locked=true +PC6.Mode=SD_4_bits_Wide_bus_dir_voltage_converter +PC6.PinAttribute=CortexM7 +PC6.Signal=SDMMC1_D0DIR +PC7.GPIOParameters=GPIO_Label,PinAttribute +PC7.GPIO_Label=SDIO1_D123DIR +PC7.Locked=true +PC7.Mode=SD_4_bits_Wide_bus_dir_voltage_converter +PC7.PinAttribute=CortexM7 +PC7.Signal=SDMMC1_D123DIR +PC8.GPIOParameters=GPIO_Label,PinAttribute +PC8.GPIO_Label=SDIO1_D0 +PC8.Locked=true +PC8.Mode=SD_4_bits_Wide_bus_auto_dir_voltage_converter +PC8.PinAttribute=CortexM7 +PC8.Signal=SDMMC1_D0 +PC9.GPIOParameters=GPIO_Label,PinAttribute +PC9.GPIO_Label=SDIO1_D1 +PC9.Locked=true +PC9.Mode=SD_4_bits_Wide_bus_auto_dir_voltage_converter +PC9.PinAttribute=CortexM7 +PC9.Signal=SDMMC1_D1 +PD0.GPIOParameters=GPIO_Label,PinAttribute +PD0.GPIO_Label=D2 [IS42S32800G_DQ2] +PD0.Locked=true +PD0.PinAttribute=CortexM7 +PD0.Signal=FMC_D2_DA2 +PD1.GPIOParameters=GPIO_Label,PinAttribute +PD1.GPIO_Label=D3 [IS42S32800G_DQ3] +PD1.Locked=true +PD1.PinAttribute=CortexM7 +PD1.Signal=FMC_D3_DA3 +PD10.GPIOParameters=GPIO_Label,PinAttribute +PD10.GPIO_Label=D15 [IS42S32800G_DQ15] +PD10.Locked=true +PD10.PinAttribute=CortexM7 +PD10.Signal=FMC_D15_DA15 +PD11.GPIOParameters=GPIO_Label,PinAttribute +PD11.GPIO_Label=A16 [PC28F128M29EWLA_A16] +PD11.Locked=true +PD11.PinAttribute=CortexM7 +PD11.Signal=FMC_A16_CLE +PD12.GPIOParameters=GPIO_Label,PinAttribute +PD12.GPIO_Label=A17 [PC28F128M29EWLA_A17] +PD12.Locked=true +PD12.PinAttribute=CortexM7 +PD12.Signal=FMC_A17_ALE +PD13.GPIOParameters=GPIO_Label,PinAttribute +PD13.GPIO_Label=A18 [PC28F128M29EWLA_A18] +PD13.Locked=true +PD13.PinAttribute=CortexM7 +PD13.Signal=FMC_A18 +PD14.GPIOParameters=GPIO_Label,PinAttribute +PD14.GPIO_Label=D0 [IS42S32800G_DQ0] +PD14.Locked=true +PD14.PinAttribute=CortexM7 +PD14.Signal=FMC_D0_DA0 +PD15.GPIOParameters=GPIO_Label,PinAttribute +PD15.GPIO_Label=D1 [IS42S32800G_DQ1] +PD15.Locked=true +PD15.PinAttribute=CortexM7 +PD15.Signal=FMC_D1_DA1 +PD2.GPIOParameters=GPIO_Label,PinAttribute +PD2.GPIO_Label=SDIO1_CMD +PD2.Locked=true +PD2.Mode=SD_4_bits_Wide_bus_auto_dir_voltage_converter +PD2.PinAttribute=CortexM7 +PD2.Signal=SDMMC1_CMD +PD3.GPIOParameters=GPIO_Label,PinAttribute +PD3.GPIO_Label=FDCAN1_STBY [MCP2562FD_STBY] +PD3.Locked=true +PD3.PinAttribute=Free +PD3.Signal=GPIO_Output +PD4.GPIOParameters=GPIO_Label,PinAttribute +PD4.GPIO_Label=FMC_NOE [IS61WV102416BLL_OE] +PD4.Locked=true +PD4.PinAttribute=CortexM7 +PD4.Signal=FMC_NOE +PD5.GPIOParameters=GPIO_Label,PinAttribute +PD5.GPIO_Label=FMC_NWE [IS61WV102416BLL_WE] +PD5.Locked=true +PD5.PinAttribute=CortexM7 +PD5.Signal=FMC_NWE +PD6.GPIOParameters=GPIO_Label,PinAttribute +PD6.GPIO_Label=FMC_NWAIT [PC28F128M29EWLA_RB] +PD6.Locked=true +PD6.PinAttribute=CortexM7 +PD6.Signal=FMC_NWAIT +PD7.GPIOParameters=GPIO_Label,PinAttribute +PD7.GPIO_Label=FMC_NE1 [PC28F128M29EWLA_E] +PD7.Locked=true +PD7.Mode=NorPsramChipSelect1_1 +PD7.PinAttribute=CortexM7 +PD7.Signal=FMC_NE1 +PD8.GPIOParameters=GPIO_Label,PinAttribute +PD8.GPIO_Label=D13 [IS42S32800G_DQ13] +PD8.Locked=true +PD8.PinAttribute=CortexM7 +PD8.Signal=FMC_D13_DA13 +PD9.GPIOParameters=GPIO_Label,PinAttribute +PD9.GPIO_Label=D14 [IS42S32800G_DQ14] +PD9.Locked=true +PD9.PinAttribute=CortexM7 +PD9.Signal=FMC_D14_DA14 +PE0.GPIOParameters=GPIO_Label,PinAttribute +PE0.GPIO_Label=FMC_NBL0 [IS42S32800G_DQM0] +PE0.Locked=true +PE0.PinAttribute=CortexM7 +PE0.Signal=FMC_NBL0 +PE1.GPIOParameters=GPIO_Label,PinAttribute +PE1.GPIO_Label=FMC_NBL1 [IS42S32800G_DQM1] +PE1.Locked=true +PE1.PinAttribute=CortexM7 +PE1.Signal=FMC_NBL1 +PE10.GPIOParameters=GPIO_Label,PinAttribute +PE10.GPIO_Label=D7 [IS42S32800G_DQ7] +PE10.Locked=true +PE10.PinAttribute=CortexM7 +PE10.Signal=FMC_D7_DA7 +PE11.GPIOParameters=GPIO_Label,PinAttribute +PE11.GPIO_Label=D8 [IS42S32800G_DQ8] +PE11.Locked=true +PE11.PinAttribute=CortexM7 +PE11.Signal=FMC_D8_DA8 +PE12.GPIOParameters=GPIO_Label,PinAttribute +PE12.GPIO_Label=D9 [IS42S32800G_DQ9] +PE12.Locked=true +PE12.PinAttribute=CortexM7 +PE12.Signal=FMC_D9_DA9 +PE13.GPIOParameters=GPIO_Label,PinAttribute +PE13.GPIO_Label=D10 [IS42S32800G_DQ10] +PE13.Locked=true +PE13.PinAttribute=CortexM7 +PE13.Signal=FMC_D10_DA10 +PE14.GPIOParameters=GPIO_Label,PinAttribute +PE14.GPIO_Label=D11 [IS42S32800G_DQ11] +PE14.Locked=true +PE14.PinAttribute=CortexM7 +PE14.Signal=FMC_D11_DA11 +PE15.GPIOParameters=GPIO_Label,PinAttribute +PE15.GPIO_Label=D12 [IS42S32800G_DQ12] +PE15.Locked=true +PE15.PinAttribute=CortexM7 +PE15.Signal=FMC_D12_DA12 +PE2.GPIOParameters=GPIO_Label,PinAttribute +PE2.GPIO_Label=PDM1_CLK +PE2.Locked=true +PE2.PinAttribute=CortexM7 +PE2.Signal=SAI4_CK1 +PE3.GPIOParameters=GPIO_Label,PinAttribute +PE3.GPIO_Label=SAI1_SDB [WM8994ECS_ADCDAT1] +PE3.Locked=true +PE3.Mode=SAI_B_SyncSlave +PE3.PinAttribute=CortexM7 +PE3.Signal=SAI1_SD_B +PE4.GPIOParameters=GPIO_Label,PinAttribute +PE4.GPIO_Label=SAI1_FSA [WM8994ECS_LRCLK1] +PE4.Locked=true +PE4.Mode=SAI_A_MasterWithClock +PE4.PinAttribute=CortexM7 +PE4.Signal=SAI1_FS_A +PE5.GPIOParameters=GPIO_Label,PinAttribute +PE5.GPIO_Label=SAI1_SCKA [WM8994ECS_BCK1] +PE5.Locked=true +PE5.Mode=SAI_A_MasterWithClock +PE5.PinAttribute=CortexM7 +PE5.Signal=SAI1_SCK_A +PE6.GPIOParameters=GPIO_Label,PinAttribute +PE6.GPIO_Label=SAI1_SDA [WM8994ECS_DACDAT1] +PE6.Locked=true +PE6.Mode=SAI_A_MasterWithClock +PE6.PinAttribute=CortexM7 +PE6.Signal=SAI1_SD_A +PE7.GPIOParameters=GPIO_Label,PinAttribute +PE7.GPIO_Label=D4 [IS42S32800G_DQ4] +PE7.Locked=true +PE7.PinAttribute=CortexM7 +PE7.Signal=FMC_D4_DA4 +PE8.GPIOParameters=GPIO_Label,PinAttribute +PE8.GPIO_Label=D5 [IS42S32800G_DQ5] +PE8.Locked=true +PE8.PinAttribute=CortexM7 +PE8.Signal=FMC_D5_DA5 +PE9.GPIOParameters=GPIO_Label,PinAttribute +PE9.GPIO_Label=D6 [IS42S32800G_DQ6] +PE9.Locked=true +PE9.PinAttribute=CortexM7 +PE9.Signal=FMC_D6_DA6 +PF0.GPIOParameters=GPIO_Label,PinAttribute +PF0.GPIO_Label=A0 [PC28F128M29EWLA_A0] +PF0.Locked=true +PF0.PinAttribute=CortexM7 +PF0.Signal=FMC_A0 +PF1.GPIOParameters=GPIO_Label,PinAttribute +PF1.GPIO_Label=A1 [PC28F128M29EWLA_A1] +PF1.Locked=true +PF1.PinAttribute=CortexM7 +PF1.Signal=FMC_A1 +PF10.GPIOParameters=GPIO_Label,PinAttribute +PF10.GPIO_Label=GPIO_DSI_RST +PF10.Locked=true +PF10.PinAttribute=Free +PF10.Signal=GPIO_Output +PF11.GPIOParameters=GPIO_Label,PinAttribute +PF11.GPIO_Label=SNDRAS [IS42S32800G_RAS] +PF11.Locked=true +PF11.PinAttribute=CortexM7 +PF11.Signal=FMC_SDNRAS +PF12.GPIOParameters=GPIO_Label,PinAttribute +PF12.GPIO_Label=A6 [PC28F128M29EWLA_A6] +PF12.Locked=true +PF12.PinAttribute=CortexM7 +PF12.Signal=FMC_A6 +PF13.GPIOParameters=GPIO_Label,PinAttribute +PF13.GPIO_Label=A7 [PC28F128M29EWLA_A7] +PF13.Locked=true +PF13.PinAttribute=CortexM7 +PF13.Signal=FMC_A7 +PF14.GPIOParameters=GPIO_Label,PinAttribute +PF14.GPIO_Label=A8 [PC28F128M29EWLA_A8] +PF14.Locked=true +PF14.PinAttribute=CortexM7 +PF14.Signal=FMC_A8 +PF15.GPIOParameters=GPIO_Label,PinAttribute +PF15.GPIO_Label=A9 [PC28F128M29EWLA_A9] +PF15.Locked=true +PF15.PinAttribute=CortexM7 +PF15.Signal=FMC_A9 +PF2.GPIOParameters=GPIO_Label,PinAttribute +PF2.GPIO_Label=A2 [PC28F128M29EWLA_A2] +PF2.Locked=true +PF2.PinAttribute=CortexM7 +PF2.Signal=FMC_A2 +PF3.GPIOParameters=GPIO_Label,PinAttribute +PF3.GPIO_Label=A3 [PC28F128M29EWLA_A3] +PF3.Locked=true +PF3.PinAttribute=CortexM7 +PF3.Signal=FMC_A3 +PF4.GPIOParameters=GPIO_Label,PinAttribute +PF4.GPIO_Label=A4 [PC28F128M29EWLA_A4] +PF4.Locked=true +PF4.PinAttribute=CortexM7 +PF4.Signal=FMC_A4 +PF5.GPIOParameters=GPIO_Label,PinAttribute +PF5.GPIO_Label=A5 [PC28F128M29EWLA_A5] +PF5.Locked=true +PF5.PinAttribute=CortexM7 +PF5.Signal=FMC_A5 +PF6.GPIOParameters=GPIO_Label,PinAttribute +PF6.GPIO_Label=QSPI_BK1_IO3 [MT25TL01GHBA8ESF_DQ3] +PF6.Locked=true +PF6.Mode=Dual_Bank +PF6.PinAttribute=CortexM7 +PF6.Signal=QUADSPI_BK1_IO3 +PF7.GPIOParameters=GPIO_Label,PinAttribute +PF7.GPIO_Label=QSPI_BK1_IO2 [MT25TL01GHBA8ESF_DQ2] +PF7.Locked=true +PF7.Mode=Dual_Bank +PF7.PinAttribute=CortexM7 +PF7.Signal=QUADSPI_BK1_IO2 +PF8.GPIOParameters=GPIO_Label,PinAttribute +PF8.GPIO_Label=QSPI_BK1_IO0 [MT25TL01GHBA8ESF_DQ0] +PF8.Locked=true +PF8.Mode=Dual_Bank +PF8.PinAttribute=CortexM7 +PF8.Signal=QUADSPI_BK1_IO0 +PF9.GPIOParameters=GPIO_Label,PinAttribute +PF9.GPIO_Label=QSPI_BK1_IO1 [MT25TL01GHBA8ESF_DQ1] +PF9.Locked=true +PF9.Mode=Dual_Bank +PF9.PinAttribute=CortexM7 +PF9.Signal=QUADSPI_BK1_IO1 +PG0.GPIOParameters=GPIO_Label,PinAttribute +PG0.GPIO_Label=A10 [PC28F128M29EWLA_A10] +PG0.Locked=true +PG0.PinAttribute=CortexM7 +PG0.Signal=FMC_A10 +PG1.GPIOParameters=GPIO_Label,PinAttribute +PG1.GPIO_Label=A11 [PC28F128M29EWLA_A11] +PG1.Locked=true +PG1.PinAttribute=CortexM7 +PG1.Signal=FMC_A11 +PG10.GPIOParameters=GPIO_Label,PinAttribute +PG10.GPIO_Label=FMC_NE3 [IS61WV102416BLL_CE] +PG10.Locked=true +PG10.Mode=NorPsramChipSelect3_2 +PG10.PinAttribute=CortexM7 +PG10.Signal=FMC_NE3 +PG11.GPIOParameters=GPIO_Label,PinAttribute +PG11.GPIO_Label=RMII_TX_EN [LAN8742A_TXEN] +PG11.Locked=true +PG11.Mode=RMII +PG11.PinAttribute=CortexM4 +PG11.Signal=ETH_TX_EN +PG12.GPIOParameters=GPIO_Label,PinAttribute +PG12.GPIO_Label=RMII_TXD1 [LAN8742A_TXD1] +PG12.Locked=true +PG12.Mode=RMII +PG12.PinAttribute=CortexM4 +PG12.Signal=ETH_TXD1 +PG13.GPIOParameters=GPIO_Label,PinAttribute +PG13.GPIO_Label=RMII_TXD0 [LAN8742A_TXD0] +PG13.Locked=true +PG13.Mode=RMII +PG13.PinAttribute=CortexM4 +PG13.Signal=ETH_TXD0 +PG14.GPIOParameters=GPIO_Label,PinAttribute +PG14.GPIO_Label=QSPI_BK2_IO3 [MT25TL01GHBA8ESF_DQ7] +PG14.Locked=true +PG14.Mode=Dual_Bank +PG14.PinAttribute=CortexM7 +PG14.Signal=QUADSPI_BK2_IO3 +PG15.GPIOParameters=GPIO_Label,PinAttribute +PG15.GPIO_Label=SDNCAS [IS42S32800G_CAS] +PG15.Locked=true +PG15.PinAttribute=CortexM7 +PG15.Signal=FMC_SDNCAS +PG2.GPIOParameters=GPIO_Label,PinAttribute +PG2.GPIO_Label=A12 [PC28F128M29EWLA_A12] +PG2.Locked=true +PG2.PinAttribute=CortexM7 +PG2.Signal=FMC_A12 +PG3.GPIOParameters=GPIO_Label,PinAttribute +PG3.GPIO_Label=A13 [PC28F128M29EWLA_A13] +PG3.Locked=true +PG3.PinAttribute=CortexM7 +PG3.Signal=FMC_A13 +PG4.GPIOParameters=PinAttribute +PG4.Locked=true +PG4.PinAttribute=CortexM7 +PG4.Signal=FMC_A14_BA0 +PG5.GPIOParameters=PinAttribute +PG5.Locked=true +PG5.PinAttribute=CortexM7 +PG5.Signal=FMC_A15_BA1 +PG6.GPIOParameters=GPIO_Label,PinAttribute +PG6.GPIO_Label=QSPI_BK1_NCS [MT25TL01GHBA8ESF_CS] +PG6.Locked=true +PG6.Mode=Enable Chip Select 1 for both banks +PG6.PinAttribute=CortexM7 +PG6.Signal=QUADSPI_BK1_NCS +PG7.GPIOParameters=GPIO_Label,PinAttribute +PG7.GPIO_Label=SAI1_MCLKA [WM8994ECS_MCLK1] +PG7.Locked=true +PG7.Mode=SAI_A_MasterWithClock +PG7.PinAttribute=CortexM7 +PG7.Signal=SAI1_MCLK_A +PG8.GPIOParameters=GPIO_Label,PinAttribute +PG8.GPIO_Label=SDCLK [IS42S32800G_CLK] +PG8.Locked=true +PG8.PinAttribute=CortexM7 +PG8.Signal=FMC_SDCLK +PG9.GPIOParameters=GPIO_Label,PinAttribute +PG9.GPIO_Label=QSPI_BK2_IO2 [MT25TL01GHBA8ESF_DQ6] +PG9.Locked=true +PG9.Mode=Dual_Bank +PG9.PinAttribute=CortexM7 +PG9.Signal=QUADSPI_BK2_IO2 +PH0-OSC_IN\ (PH0).GPIOParameters=GPIO_Label,PinAttribute +PH0-OSC_IN\ (PH0).GPIO_Label=OSC_IN +PH0-OSC_IN\ (PH0).Locked=true +PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator +PH0-OSC_IN\ (PH0).PinAttribute=CortexM7 +PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN +PH1-OSC_OUT\ (PH1).GPIOParameters=GPIO_Label,PinAttribute +PH1-OSC_OUT\ (PH1).GPIO_Label=OSC_OUT +PH1-OSC_OUT\ (PH1).Locked=true +PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator +PH1-OSC_OUT\ (PH1).PinAttribute=CortexM7 +PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT +PH10.GPIOParameters=GPIO_Label,PinAttribute +PH10.GPIO_Label=D18 [IS42S32800G_DQ18] +PH10.Locked=true +PH10.PinAttribute=CortexM7 +PH10.Signal=FMC_D18 +PH11.GPIOParameters=GPIO_Label,PinAttribute +PH11.GPIO_Label=D19 [IS42S32800G_DQ19] +PH11.Locked=true +PH11.PinAttribute=CortexM7 +PH11.Signal=FMC_D19 +PH12.GPIOParameters=GPIO_Label,PinAttribute +PH12.GPIO_Label=D20 [IS42S32800G_DQ20] +PH12.Locked=true +PH12.PinAttribute=CortexM7 +PH12.Signal=FMC_D20 +PH13.GPIOParameters=GPIO_Label,PinAttribute +PH13.GPIO_Label=D21 [IS42S32800G_DQ21] +PH13.Locked=true +PH13.PinAttribute=CortexM7 +PH13.Signal=FMC_D21 +PH14.GPIOParameters=GPIO_Label,PinAttribute +PH14.GPIO_Label=D22 [IS42S32800G_DQ22] +PH14.Locked=true +PH14.PinAttribute=CortexM7 +PH14.Signal=FMC_D22 +PH15.GPIOParameters=GPIO_Label,PinAttribute +PH15.GPIO_Label=D23 [IS42S32800G_DQ23] +PH15.Locked=true +PH15.PinAttribute=CortexM7 +PH15.Signal=FMC_D23 +PH2.GPIOParameters=GPIO_Label,PinAttribute +PH2.GPIO_Label=QSPI_BK2_IO0 [MT25TL01GHBA8ESF_DQ4] +PH2.Locked=true +PH2.Mode=Dual_Bank +PH2.PinAttribute=CortexM7 +PH2.Signal=QUADSPI_BK2_IO0 +PH3.GPIOParameters=GPIO_Label,PinAttribute +PH3.GPIO_Label=QSPI_BK2_IO1 [MT25TL01GHBA8ESF_DQ5] +PH3.Locked=true +PH3.Mode=Dual_Bank +PH3.PinAttribute=CortexM7 +PH3.Signal=QUADSPI_BK2_IO1 +PH4.GPIOParameters=GPIO_Label,PinAttribute +PH4.GPIO_Label=ULPI_NXT [USB3320C_NXT] +PH4.Locked=true +PH4.Mode=Device_HS +PH4.PinAttribute=CortexM7 +PH4.Signal=USB_OTG_HS_ULPI_NXT +PH5.GPIOParameters=GPIO_Label,PinAttribute +PH5.GPIO_Label=SDNWE [IS42S32800G_WE] +PH5.Locked=true +PH5.PinAttribute=CortexM7 +PH5.Signal=FMC_SDNWE +PH6.GPIOParameters=GPIO_Label,PinAttribute +PH6.GPIO_Label=SDNE1 [IS42S32800G_CS] +PH6.Locked=true +PH6.Mode=SdramChipSelect2_1 +PH6.PinAttribute=CortexM7 +PH6.Signal=FMC_SDNE1 +PH7.GPIOParameters=GPIO_Label,PinAttribute +PH7.GPIO_Label=SDCKE1 [IS42S32800G_CKE] +PH7.Locked=true +PH7.Mode=SdramChipSelect2_1 +PH7.PinAttribute=CortexM7 +PH7.Signal=FMC_SDCKE1 +PH8.GPIOParameters=GPIO_Label,PinAttribute +PH8.GPIO_Label=D16 [IS42S32800G_DQ16] +PH8.Locked=true +PH8.PinAttribute=CortexM7 +PH8.Signal=FMC_D16 +PH9.GPIOParameters=GPIO_Label,PinAttribute +PH9.GPIO_Label=D17 [IS42S32800G_DQ17] +PH9.Locked=true +PH9.PinAttribute=CortexM7 +PH9.Signal=FMC_D17 +PI0.GPIOParameters=GPIO_Label,PinAttribute +PI0.GPIO_Label=D24 [IS42S32800G_DQ24] +PI0.Locked=true +PI0.PinAttribute=CortexM7 +PI0.Signal=FMC_D24 +PI1.GPIOParameters=GPIO_Label,PinAttribute +PI1.GPIO_Label=D25 [IS42S32800G_DQ25] +PI1.Locked=true +PI1.PinAttribute=CortexM7 +PI1.Signal=FMC_D25 +PI10.GPIOParameters=GPIO_Label,PinAttribute +PI10.GPIO_Label=D31 [IS42S32800G_DQ31] +PI10.Locked=true +PI10.PinAttribute=CortexM7 +PI10.Signal=FMC_D31 +PI11.GPIOParameters=GPIO_Label,PinAttribute +PI11.GPIO_Label=ULPI_DIR [USB3320C_DIR] +PI11.Locked=true +PI11.Mode=Device_HS +PI11.PinAttribute=CortexM7 +PI11.Signal=USB_OTG_HS_ULPI_DIR +PI2.GPIOParameters=GPIO_Label,PinAttribute +PI2.GPIO_Label=D26 [IS42S32800G_DQ26] +PI2.Locked=true +PI2.PinAttribute=CortexM7 +PI2.Signal=FMC_D26 +PI3.GPIOParameters=GPIO_Label,PinAttribute +PI3.GPIO_Label=D27 [IS42S32800G_DQ27 +PI3.Locked=true +PI3.PinAttribute=CortexM7 +PI3.Signal=FMC_D27 +PI4.GPIOParameters=GPIO_Label,PinAttribute +PI4.GPIO_Label=FMC_NBL2 [IS42S32800G_DQM2] +PI4.Locked=true +PI4.PinAttribute=CortexM7 +PI4.Signal=FMC_NBL2 +PI5.GPIOParameters=GPIO_Label,PinAttribute +PI5.GPIO_Label=FMC_NBL3 [IS42S32800G_DQM3] +PI5.Locked=true +PI5.PinAttribute=CortexM7 +PI5.Signal=FMC_NBL3 +PI6.GPIOParameters=GPIO_Label,PinAttribute +PI6.GPIO_Label=D28 [IS42S32800G_DQ28] +PI6.Locked=true +PI6.PinAttribute=CortexM7 +PI6.Signal=FMC_D28 +PI7.GPIOParameters=GPIO_Label,PinAttribute +PI7.GPIO_Label=D29 [IS42S32800G_DQ29] +PI7.Locked=true +PI7.PinAttribute=CortexM7 +PI7.Signal=FMC_D29 +PI8.GPIOParameters=GPIO_Label,PinAttribute +PI8.GPIO_Label=GPIO_EXPANDER_INT [MFX_V3_IRQOUT] +PI8.Locked=true +PI8.PinAttribute=Free +PI8.Signal=GPXTI8 +PI9.GPIOParameters=GPIO_Label,PinAttribute +PI9.GPIO_Label=D30 [IS42S32800G_DQ30] +PI9.Locked=true +PI9.PinAttribute=CortexM7 +PI9.Signal=FMC_D30 +PinOutPanel.CurrentBGAView=Top +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.BootMode=boot0 +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32H747XIHx +ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.2 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=M4-0x200,M7-0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=1 +ProjectManager.MainLocation=Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=STM32CubeMX.ioc +ProjectManager.ProjectName=STM32CubeMX +ProjectManager.ProjectStructure=M7\:CortexM7 Project\:true;M4\:CortexM4 Project\:true; +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=M4-0x400,M7-0x400 +ProjectManager.TargetToolchain=MDK-ARM V5.32 +ProjectManager.ToolChainLocation= +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false-CortexM7,2-MX_GPIO_Init-GPIO-false-HAL-true-CortexM7,3-MX_DFSDM1_Init-DFSDM1-true-HAL-false-CortexM7,4-MX_DSIHOST_DSI_Init-DSIHOST-false-HAL-true-CortexM7,5-MX_ETH_Init-ETH-true-HAL-false-CortexM7,6-MX_FMC_Init-FMC-false-HAL-true-CortexM7,7-MX_I2C1_Init-I2C1-false-HAL-true-CortexM7,8-MX_LTDC_Init-LTDC-false-HAL-true-CortexM7,9-MX_QUADSPI_Init-QUADSPI-false-HAL-true-CortexM7,10-MX_SAI1_Init-SAI1-false-HAL-true-CortexM7,11-MX_SDMMC1_SD_Init-SDMMC1-true-HAL-true-CortexM7,12-MX_USART1_UART_Init-USART1-false-HAL-true-CortexM7,13-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true-CortexM7,14-MX_USB_OTG_HS_PCD_Init-USB_OTG_HS-false-HAL-true-CortexM7,1-MX_GPIO_Init-GPIO-false-HAL-true-CortexM4,2-MX_DFSDM1_Init-DFSDM1-false-HAL-true-CortexM4,3-MX_ETH_Init-ETH-false-HAL-true-CortexM4,4-MX_FMC_Init-FMC-true-HAL-false-CortexM4,5-MX_I2C1_Init-I2C1-true-HAL-false-CortexM4,6-MX_QUADSPI_Init-QUADSPI-true-HAL-false-CortexM4,7-MX_SAI1_Init-SAI1-true-HAL-false-CortexM4,8-MX_SDMMC1_SD_Init-SDMMC1-true-HAL-false-CortexM4,9-MX_USART1_UART_Init-USART1-true-HAL-false-CortexM4,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true-CortexM7,0-MX_CORTEX_M4_Init-CORTEX_M4-false-HAL-true-CortexM4 +RCC.ADCFreq_Value=58593750 +RCC.AHB12Freq_Value=75000000 +RCC.AHB4Freq_Value=75000000 +RCC.APB1Freq_Value=75000000 +RCC.APB2Freq_Value=75000000 +RCC.APB3Freq_Value=75000000 +RCC.APB4Freq_Value=75000000 +RCC.AXIClockFreq_Value=75000000 +RCC.CECFreq_Value=32000 +RCC.CKPERFreq_Value=64000000 +RCC.CPU2Freq_Value=75000000 +RCC.CPU2SystikFreq_Value=75000000 +RCC.CortexFreq_Value=75000000 +RCC.CpuClockFreq_Value=75000000 +RCC.D1CPREFreq_Value=75000000 +RCC.DFSDMACLkFreq_Value=150000000 +RCC.DFSDMFreq_Value=75000000 +RCC.DIVM1=2 +RCC.DIVM2=4 +RCC.DIVM3=1 +RCC.DIVN1=12 +RCC.DIVN2=9 +RCC.DIVN3=6 +RCC.DIVP1Freq_Value=75000000 +RCC.DIVP2=1 +RCC.DIVP2Freq_Value=58593750 +RCC.DIVP3Freq_Value=75000000 +RCC.DIVQ1=1 +RCC.DIVQ1Freq_Value=150000000 +RCC.DIVQ2Freq_Value=29296875 +RCC.DIVQ3Freq_Value=75000000 +RCC.DIVR1Freq_Value=75000000 +RCC.DIVR2Freq_Value=29296875 +RCC.DIVR3=1 +RCC.DIVR3Freq_Value=150000000 +RCC.DSIFreq_Value=31250000 +RCC.DSITXEscFreq_Value=15625000 +RCC.DSITX_Div=2 +RCC.FDCANFreq_Value=150000000 +RCC.FMCFreq_Value=75000000 +RCC.FamilyName=M +RCC.HCLK3ClockFreq_Value=75000000 +RCC.HCLKFreq_Value=75000000 +RCC.HPREFreq_Value=80000000 +RCC.HRTIMFreq_Value=75000000 +RCC.I2C123Freq_Value=75000000 +RCC.I2C4Freq_Value=75000000 +RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CPU2Freq_Value,CPU2SystikFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,DSIFreq_Value,DSITXEscFreq_Value,DSITX_Div,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPREFreq_Value,HRTIMFreq_Value,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL3FRACN,PLLDSIFreq_Value,PLLDSIODF,PLLDSIVCOFreq_Value,PLLFRACN,PLLSourceVirtual,PWR_Regulator_Voltage_Scale,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SupplySource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBCLockSelection,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value +RCC.LPTIM1Freq_Value=75000000 +RCC.LPTIM2Freq_Value=75000000 +RCC.LPTIM345Freq_Value=75000000 +RCC.LPUART1Freq_Value=75000000 +RCC.LTDCFreq_Value=150000000 +RCC.MCO1PinFreq_Value=64000000 +RCC.MCO2PinFreq_Value=75000000 +RCC.PLL2FRACN=3072 +RCC.PLL3FRACN=0 +RCC.PLLDSIFreq_Value=250000000 +RCC.PLLDSIODF=DSI_PLL_OUT_DIV2 +RCC.PLLDSIVCOFreq_Value=1000000000 +RCC.PLLFRACN=0 +RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE +RCC.PWR_Regulator_Voltage_Scale=PWR_REGULATOR_VOLTAGE_SCALE1 +RCC.QSPIFreq_Value=75000000 +RCC.RNGFreq_Value=48000000 +RCC.RTCFreq_Value=32000 +RCC.SAI1Freq_Value=150000000 +RCC.SAI23Freq_Value=150000000 +RCC.SAI4AFreq_Value=150000000 +RCC.SAI4BFreq_Value=150000000 +RCC.SDMMCFreq_Value=150000000 +RCC.SPDIFRXFreq_Value=150000000 +RCC.SPI123Freq_Value=150000000 +RCC.SPI45Freq_Value=75000000 +RCC.SPI6Freq_Value=75000000 +RCC.SWPMI1Freq_Value=75000000 +RCC.SYSCLKFreq_VALUE=75000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.SupplySource=PWR_DIRECT_SMPS_SUPPLY +RCC.Tim1OutputFreq_Value=75000000 +RCC.Tim2OutputFreq_Value=75000000 +RCC.TraceFreq_Value=64000000 +RCC.USART16Freq_Value=75000000 +RCC.USART234578Freq_Value=75000000 +RCC.USBCLockSelection=RCC_USBCLKSOURCE_HSI48 +RCC.USBFreq_Value=48000000 +RCC.VCO1OutputFreq_Value=150000000 +RCC.VCO2OutputFreq_Value=58593750 +RCC.VCO3OutputFreq_Value=150000000 +RCC.VCOInput1Freq_Value=12500000 +RCC.VCOInput2Freq_Value=6250000 +RCC.VCOInput3Freq_Value=25000000 +SAI1.ErrorAudioFreq-SAI_A_MasterWithClock=52.58 % +SAI1.IPParameters=Instance-SAI_A_MasterWithClock,VirtualMode-SAI_A_MasterWithClock,MClockEnable-SAI_A_MasterWithClock,RealAudioFreq-SAI_A_MasterWithClock,ErrorAudioFreq-SAI_A_MasterWithClock,Instance-SAI_B_SyncSlave,VirtualMode-SAI_B_SyncSlave,InitProtocol-SAI_A_MasterWithClock,VirtualProtocol-SAI_A_BASIC +SAI1.InitProtocol-SAI_A_MasterWithClock=Enable +SAI1.Instance-SAI_A_MasterWithClock=SAI$Index_Block_A +SAI1.Instance-SAI_B_SyncSlave=SAI$Index_Block_B +SAI1.MClockEnable-SAI_A_MasterWithClock=SAI_MASTERCLOCK_ENABLE +SAI1.RealAudioFreq-SAI_A_MasterWithClock=292.968 KHz +SAI1.VirtualMode-SAI_A_MasterWithClock=VM_MASTER +SAI1.VirtualMode-SAI_B_SyncSlave=VM_SLAVE +SAI1.VirtualProtocol-SAI_A_BASIC=VM_BASIC_PROTOCOL +SH.FMC_A0.0=FMC_A0,19b-a1 +SH.FMC_A0.1=FMC_A0,19b-a2 +SH.FMC_A0.2=FMC_A0,11b-sda1 +SH.FMC_A0.ConfNb=3 +SH.FMC_A1.0=FMC_A1,19b-a1 +SH.FMC_A1.1=FMC_A1,19b-a2 +SH.FMC_A1.2=FMC_A1,11b-sda1 +SH.FMC_A1.ConfNb=3 +SH.FMC_A10.0=FMC_A10,19b-a1 +SH.FMC_A10.1=FMC_A10,19b-a2 +SH.FMC_A10.2=FMC_A10,11b-sda1 +SH.FMC_A10.ConfNb=3 +SH.FMC_A11.0=FMC_A11,19b-a1 +SH.FMC_A11.1=FMC_A11,19b-a2 +SH.FMC_A11.ConfNb=2 +SH.FMC_A12.0=FMC_A12,19b-a1 +SH.FMC_A12.1=FMC_A12,19b-a2 +SH.FMC_A12.ConfNb=2 +SH.FMC_A13.0=FMC_A13,19b-a1 +SH.FMC_A13.1=FMC_A13,19b-a2 +SH.FMC_A13.ConfNb=2 +SH.FMC_A14_BA0.0=FMC_A14,19b-a1 +SH.FMC_A14_BA0.1=FMC_A14,19b-a2 +SH.FMC_A14_BA0.2=FMC_BA0,FourSdramBanks1 +SH.FMC_A14_BA0.ConfNb=3 +SH.FMC_A15_BA1.0=FMC_A15,19b-a1 +SH.FMC_A15_BA1.1=FMC_A15,19b-a2 +SH.FMC_A15_BA1.2=FMC_BA1,FourSdramBanks1 +SH.FMC_A15_BA1.ConfNb=3 +SH.FMC_A16_CLE.0=FMC_A16,19b-a1 +SH.FMC_A16_CLE.1=FMC_A16,19b-a2 +SH.FMC_A16_CLE.ConfNb=2 +SH.FMC_A17_ALE.0=FMC_A17,19b-a1 +SH.FMC_A17_ALE.1=FMC_A17,19b-a2 +SH.FMC_A17_ALE.ConfNb=2 +SH.FMC_A18.0=FMC_A18,19b-a1 +SH.FMC_A18.1=FMC_A18,19b-a2 +SH.FMC_A18.ConfNb=2 +SH.FMC_A2.0=FMC_A2,19b-a1 +SH.FMC_A2.1=FMC_A2,19b-a2 +SH.FMC_A2.2=FMC_A2,11b-sda1 +SH.FMC_A2.ConfNb=3 +SH.FMC_A3.0=FMC_A3,19b-a1 +SH.FMC_A3.1=FMC_A3,19b-a2 +SH.FMC_A3.2=FMC_A3,11b-sda1 +SH.FMC_A3.ConfNb=3 +SH.FMC_A4.0=FMC_A4,19b-a1 +SH.FMC_A4.1=FMC_A4,19b-a2 +SH.FMC_A4.2=FMC_A4,11b-sda1 +SH.FMC_A4.ConfNb=3 +SH.FMC_A5.0=FMC_A5,19b-a1 +SH.FMC_A5.1=FMC_A5,19b-a2 +SH.FMC_A5.2=FMC_A5,11b-sda1 +SH.FMC_A5.ConfNb=3 +SH.FMC_A6.0=FMC_A6,19b-a1 +SH.FMC_A6.1=FMC_A6,19b-a2 +SH.FMC_A6.2=FMC_A6,11b-sda1 +SH.FMC_A6.ConfNb=3 +SH.FMC_A7.0=FMC_A7,19b-a1 +SH.FMC_A7.1=FMC_A7,19b-a2 +SH.FMC_A7.2=FMC_A7,11b-sda1 +SH.FMC_A7.ConfNb=3 +SH.FMC_A8.0=FMC_A8,19b-a1 +SH.FMC_A8.1=FMC_A8,19b-a2 +SH.FMC_A8.2=FMC_A8,11b-sda1 +SH.FMC_A8.ConfNb=3 +SH.FMC_A9.0=FMC_A9,19b-a1 +SH.FMC_A9.1=FMC_A9,19b-a2 +SH.FMC_A9.2=FMC_A9,11b-sda1 +SH.FMC_A9.ConfNb=3 +SH.FMC_D0_DA0.0=FMC_D0,16b-d1 +SH.FMC_D0_DA0.1=FMC_D0,16b-d2 +SH.FMC_D0_DA0.2=FMC_D0,sd-32b-d1 +SH.FMC_D0_DA0.ConfNb=3 +SH.FMC_D10_DA10.0=FMC_D10,16b-d1 +SH.FMC_D10_DA10.1=FMC_D10,16b-d2 +SH.FMC_D10_DA10.2=FMC_D10,sd-32b-d1 +SH.FMC_D10_DA10.ConfNb=3 +SH.FMC_D11_DA11.0=FMC_D11,16b-d1 +SH.FMC_D11_DA11.1=FMC_D11,16b-d2 +SH.FMC_D11_DA11.2=FMC_D11,sd-32b-d1 +SH.FMC_D11_DA11.ConfNb=3 +SH.FMC_D12_DA12.0=FMC_D12,16b-d1 +SH.FMC_D12_DA12.1=FMC_D12,16b-d2 +SH.FMC_D12_DA12.2=FMC_D12,sd-32b-d1 +SH.FMC_D12_DA12.ConfNb=3 +SH.FMC_D13_DA13.0=FMC_D13,16b-d1 +SH.FMC_D13_DA13.1=FMC_D13,16b-d2 +SH.FMC_D13_DA13.2=FMC_D13,sd-32b-d1 +SH.FMC_D13_DA13.ConfNb=3 +SH.FMC_D14_DA14.0=FMC_D14,16b-d1 +SH.FMC_D14_DA14.1=FMC_D14,16b-d2 +SH.FMC_D14_DA14.2=FMC_D14,sd-32b-d1 +SH.FMC_D14_DA14.ConfNb=3 +SH.FMC_D15_DA15.0=FMC_D15,16b-d1 +SH.FMC_D15_DA15.1=FMC_D15,16b-d2 +SH.FMC_D15_DA15.2=FMC_D15,sd-32b-d1 +SH.FMC_D15_DA15.ConfNb=3 +SH.FMC_D16.0=FMC_D16,sd-32b-d1 +SH.FMC_D16.ConfNb=1 +SH.FMC_D17.0=FMC_D17,sd-32b-d1 +SH.FMC_D17.ConfNb=1 +SH.FMC_D18.0=FMC_D18,sd-32b-d1 +SH.FMC_D18.ConfNb=1 +SH.FMC_D19.0=FMC_D19,sd-32b-d1 +SH.FMC_D19.ConfNb=1 +SH.FMC_D1_DA1.0=FMC_D1,16b-d1 +SH.FMC_D1_DA1.1=FMC_D1,16b-d2 +SH.FMC_D1_DA1.2=FMC_D1,sd-32b-d1 +SH.FMC_D1_DA1.ConfNb=3 +SH.FMC_D20.0=FMC_D20,sd-32b-d1 +SH.FMC_D20.ConfNb=1 +SH.FMC_D21.0=FMC_D21,sd-32b-d1 +SH.FMC_D21.ConfNb=1 +SH.FMC_D22.0=FMC_D22,sd-32b-d1 +SH.FMC_D22.ConfNb=1 +SH.FMC_D23.0=FMC_D23,sd-32b-d1 +SH.FMC_D23.ConfNb=1 +SH.FMC_D24.0=FMC_D24,sd-32b-d1 +SH.FMC_D24.ConfNb=1 +SH.FMC_D25.0=FMC_D25,sd-32b-d1 +SH.FMC_D25.ConfNb=1 +SH.FMC_D26.0=FMC_D26,sd-32b-d1 +SH.FMC_D26.ConfNb=1 +SH.FMC_D27.0=FMC_D27,sd-32b-d1 +SH.FMC_D27.ConfNb=1 +SH.FMC_D28.0=FMC_D28,sd-32b-d1 +SH.FMC_D28.ConfNb=1 +SH.FMC_D29.0=FMC_D29,sd-32b-d1 +SH.FMC_D29.ConfNb=1 +SH.FMC_D2_DA2.0=FMC_D2,16b-d1 +SH.FMC_D2_DA2.1=FMC_D2,16b-d2 +SH.FMC_D2_DA2.2=FMC_D2,sd-32b-d1 +SH.FMC_D2_DA2.ConfNb=3 +SH.FMC_D30.0=FMC_D30,sd-32b-d1 +SH.FMC_D30.ConfNb=1 +SH.FMC_D31.0=FMC_D31,sd-32b-d1 +SH.FMC_D31.ConfNb=1 +SH.FMC_D3_DA3.0=FMC_D3,16b-d1 +SH.FMC_D3_DA3.1=FMC_D3,16b-d2 +SH.FMC_D3_DA3.2=FMC_D3,sd-32b-d1 +SH.FMC_D3_DA3.ConfNb=3 +SH.FMC_D4_DA4.0=FMC_D4,16b-d1 +SH.FMC_D4_DA4.1=FMC_D4,16b-d2 +SH.FMC_D4_DA4.2=FMC_D4,sd-32b-d1 +SH.FMC_D4_DA4.ConfNb=3 +SH.FMC_D5_DA5.0=FMC_D5,16b-d1 +SH.FMC_D5_DA5.1=FMC_D5,16b-d2 +SH.FMC_D5_DA5.2=FMC_D5,sd-32b-d1 +SH.FMC_D5_DA5.ConfNb=3 +SH.FMC_D6_DA6.0=FMC_D6,16b-d1 +SH.FMC_D6_DA6.1=FMC_D6,16b-d2 +SH.FMC_D6_DA6.2=FMC_D6,sd-32b-d1 +SH.FMC_D6_DA6.ConfNb=3 +SH.FMC_D7_DA7.0=FMC_D7,16b-d1 +SH.FMC_D7_DA7.1=FMC_D7,16b-d2 +SH.FMC_D7_DA7.2=FMC_D7,sd-32b-d1 +SH.FMC_D7_DA7.ConfNb=3 +SH.FMC_D8_DA8.0=FMC_D8,16b-d1 +SH.FMC_D8_DA8.1=FMC_D8,16b-d2 +SH.FMC_D8_DA8.2=FMC_D8,sd-32b-d1 +SH.FMC_D8_DA8.ConfNb=3 +SH.FMC_D9_DA9.0=FMC_D9,16b-d1 +SH.FMC_D9_DA9.1=FMC_D9,16b-d2 +SH.FMC_D9_DA9.2=FMC_D9,sd-32b-d1 +SH.FMC_D9_DA9.ConfNb=3 +SH.FMC_NBL0.0=FMC_NBL0,2ByteEnable2 +SH.FMC_NBL0.1=FMC_NBL0,Sd4ByteEnable1 +SH.FMC_NBL0.ConfNb=2 +SH.FMC_NBL1.0=FMC_NBL1,2ByteEnable2 +SH.FMC_NBL1.1=FMC_NBL1,Sd4ByteEnable1 +SH.FMC_NBL1.ConfNb=2 +SH.FMC_NBL2.0=FMC_NBL2,Sd4ByteEnable1 +SH.FMC_NBL2.ConfNb=1 +SH.FMC_NBL3.0=FMC_NBL3,Sd4ByteEnable1 +SH.FMC_NBL3.ConfNb=1 +SH.FMC_NOE.0=FMC_NOE,NorFlash1 +SH.FMC_NOE.1=FMC_NOE,Sram2 +SH.FMC_NOE.ConfNb=2 +SH.FMC_NWAIT.0=FMC_NWAIT,AsynchronousWait1 +SH.FMC_NWAIT.1=FMC_NWAIT,AsynchronousWait2 +SH.FMC_NWAIT.ConfNb=2 +SH.FMC_NWE.0=FMC_NWE,NorFlash1 +SH.FMC_NWE.1=FMC_NWE,Sram2 +SH.FMC_NWE.ConfNb=2 +SH.FMC_SDCLK.0=FMC_SDCLK,11b-sda1 +SH.FMC_SDCLK.ConfNb=1 +SH.FMC_SDNCAS.0=FMC_SDNCAS,11b-sda1 +SH.FMC_SDNCAS.ConfNb=1 +SH.FMC_SDNRAS.0=FMC_SDNRAS,11b-sda1 +SH.FMC_SDNRAS.ConfNb=1 +SH.FMC_SDNWE.0=FMC_SDNWE,11b-sda1 +SH.FMC_SDNWE.ConfNb=1 +SH.GPXTI8.0=GPIO_EXTI8 +SH.GPXTI8.ConfNb=1 +SH.S_CKOUTDFSDM1.0=DFSDM1_CKOUT,PDM_SPI_input_from_ch1_and_internal_clock +SH.S_CKOUTDFSDM1.ConfNb=1 +SH.S_DATAIN1DFSDM1.0=DFSDM1_DATIN1,PDM_SPI_input_from_ch1_and_internal_clock +SH.S_DATAIN1DFSDM1.ConfNb=1 +USART1.IPParameters=VirtualMode-Asynchronous +USART1.VirtualMode-Asynchronous=VM_ASYNC +USB_OTG_FS.IPParameters=VirtualMode +USB_OTG_FS.VirtualMode=Device_Only +USB_OTG_HS.IPParameters=VirtualMode-Device_HS +USB_OTG_HS.VirtualMode-Device_HS=Device_HS +VP_LTDC_DSIMode.Mode=RGB888 +VP_LTDC_DSIMode.Signal=LTDC_DSIMode +VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Mode=SAI_A_BASIC +VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIA_SAI_BASIC +VP_SYS_M4_VS_Systick.Mode=SysTick +VP_SYS_M4_VS_Systick.Signal=SYS_M4_VS_Systick +VP_SYS_VS_tim17.Mode=TIM17 +VP_SYS_VS_tim17.Signal=SYS_VS_tim17 +board=STM32H747I-EVAL +boardIOC=true diff --git a/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/project.script b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/project.script new file mode 100644 index 0000000..3c5f947 --- /dev/null +++ b/Examples/Blinky/STM32CubeMX/STM32H747I-EVAL/project.script @@ -0,0 +1,4 @@ +loadboard STM32H747I-EVAL allmodes +project name STM32CubeMX +project toolchain "MDK-ARM V5" +SetCopyLibrary "copy only" diff --git a/Examples/Blinky/cdefault.yml b/Examples/Blinky/cdefault.yml new file mode 100644 index 0000000..b32da5f --- /dev/null +++ b/Examples/Blinky/cdefault.yml @@ -0,0 +1,56 @@ +default: + misc: + - for-compiler: AC6 + C-CPP: + - -Wno-macro-redefined + - -Wno-pragma-pack + - -Wno-parentheses-equality + - -Wno-license-management + C: + - -std=gnu11 + ASM: + - -masm=auto + Link: + - --entry=Reset_Handler + - --map + - --info summarysizes + - --summary_stderr + - --diag_suppress=L6314W + + - for-compiler: GCC + ASM: + - -gdwarf-4 + C-CPP: + - -masm-syntax-unified + - -fomit-frame-pointer + - -ffunction-sections + - -fdata-sections + - -gdwarf-4 + C: + - -std=gnu11 + Link: + - --specs=nano.specs + - -Wl,-Map=$elf()$.map + - -Wl,--gc-sections + + - for-compiler: CLANG + ASM: + - -gdwarf-4 + C-CPP: + - -fomit-frame-pointer + - -ffunction-sections + - -fdata-sections + - -gdwarf-4 + C: + - -std=gnu11 + Link: + - -lcrt0 + - -Wl,-Map=$elf()$.map + - -Wl,--gc-sections + + - for-compiler: IAR + C-CPP: + - -e + - --dlib_config DLib_Config_Full.h + Link: + - --map=$elf()$.map diff --git a/Images/stm32h747i-eval_large.png b/Images/stm32h747i-eval_large.png new file mode 100644 index 0000000000000000000000000000000000000000..b783c760013d9281207d4cbc9690eba0b33aefd0 GIT binary patch literal 162506 zcmXuKV~{R9(=~bx_t>^=+t_2xnF^?Tr4XL<9gp|F!=N2=4z!0I)~bf0Ee3!uJ0b{XZ}2f5HU#|Azf93}KLP-N zoB;r!mj4k1dkc4q|MNgVK>Ua37WOv(Z%hBh1qu`h0{UM-LpH_+&PV_#C@iub_r-o7 zSnyz`ibqI90w7QXL4l`^>B*@UwSp-PGvGYio$V)I{wB{aN)V)pMGHQGo9(BiKNkml zPu(w(!4mP{s}2&!H>@JDTWv5@2bGLSLBLVG$3mV;_>$GqH=e7iNRd5{r^Q75(Jrq@ zRd=AH3mE|`6h;+~Fxd`!md&eRMda?Z{nSbIY;bTOZ@38gs5hTI_0$~q;_GQE4B~}L zrR&VsdXIr~{PRPRXq1hS7Tg**Xjei^%Uz;-M{2kFS34f}t`af%F1gulwUEQFXn%RY z6$j*$o!J8hRHGmt%nHjksuI&BAoUT%}*=tG{VbA0H^6avMaHOU+*y zsH;!y{tUBsda-?c4h$hA%3Gqo!Xr4s=H(SgOxuHoZVfir01xj$basXv@WJ`RP{9Ws9P?tHmjZ%kxkPE{G9KGK}06^QiqW#0pL!DZ8`=_!Ix8G|TqJk(BVX*Y0|g)|&* zdWZ&o8Q6C&HF+K~Mpad`-%$pMqDfP6xVuu{Ovfp`T)2}66TJDWHR>}FQFCgu8ubmY z{F*U)Nroe!&r=uu-Ty6AD53xP`NM@(kX_khYVUBT%99l$h>|8LT0SP@FQ}0!)%1qZ zt}3S9O%6tzYsG3VZ-y~7-qTL65k^W~N^YFLz6Rp}SSXXQr|w2uAIu#^_Y_BW_&6NS7%X zW_GQBwdT*|!l{)O*)~lr79cKG$$qk=&vhE+GtkccSXxGUDG&deA>wJ{oY<*xY}xZTpp(ATG*%6O$2u!n&)jgqg#u&*MuQC2QKb@A3gGPP;5H31*Lca zgTG(K#~uc_g`vkZc|wPWvS-`)OhK$9M?%PlA;Tkfd7C$~Y%VMC>Bi8&V*Cw2FEdq` zkMzhKnfaouY?<#{Rf7L}rEpF-bdqy}m0XyThUE}O;+gA{KS&s25 zO)kJiI?im}$04sD=SvO5gF8sMuZnJ6)Pl7j%aree1<3LAw1K#N2j)`_# ztO!(_AO~|Gv-x*`RG9YFCkG64vdrc<+%B~Ps-E6D`uuDBxAmp~gIf>58LQKQcsB8P zkz%MPy!p1(Ftg_#i^OoJK(axFD7T5DJ5IJG^q8?DK-LU4G|oeG7eo&WW=7eH6PTiB zu+rrPrDrMRGT*G_a(}=&+wdKq%7Ul-Z`x>s#gP_wMwK2O3JAq2WR;Cm2Lmj}dxKE} zbpwbKA8bSozeV^5_{{d26#B(qJDnq_i-;8AjnY=W2l3zYu53$`PhCyPDX>D&!Ur%yc%4WJw^mzR93U?! zf$|CPl#cd5#_SLGYkNF@>C3@8g>|DV(+rtSwp(83F2F{WN9lY+buQ_uaE#$)@XUwW zKY!A1!kjud7Ni%AE5w@%@_zdGcA9g5`NW6D5x!zrID73WGdK00N9MM~6Yu#?E_H9r zKl@p_?d!-aK3)CjEG6w~vRw~zpee=tL3m78Z(cA#<^5*UQaZD!*4?xO@J*`1E>$|N zqk_bRh)Eu6ai3B~hH2f%*l*<2s$P@D2A1`0mx+!we7RR5kkW=a9Gg(ZRL(&x7^c^n+uRo%A`DS{w)y4 zO7TNsPn@}n9GXj<#eFoB-yrGIcA1nqm=J0jiQObwH|YsjFs{k-rRJGUxdm;qUccxm z7|#ORflgZFVdBX_p;a+b>8%@x=t&l{CRgo6tkoaeAx{G?7V&@~8{(EfFv zkC4c{U|rJV3LEbD6woOlxhXlt$gZ(t@t#_m39r6q_a%+G`VB<}N<+uDAAVw*W-oWM z<=4#ZVlAJ{p(`RO$~Bw!uI>ykZ~26Be-ep*+^(0y>m;3kiT;WqPLd=<|EB`(@Io3Z8;3c*8V@Cy?a2c*qT97HT=fE^EaG6?) zZCU|?9fhLW5c$;BMx|nUG#qWvzvx9_G7aO&M6bA0qdl{>@2<$7Um=Rs?T&YYvrmN_ zMAi;tFa4`}U1sje&L$^fG{;I2^)+#5JG7esE{;%ZW;D_~Y8}s1*_~Ful8qoe-QL+* zDc7=U8?N*mc38i2K!>@EDbzm>FN|L~qR7wdhXQ%^$a8-Xe&p;!(vOVZ>3L(}E`-nn zV#E!0TEpxwjt~$7b%2bx8$@2?$YNHr?vMw#(W!i7tQnrkSzKxqH?#Nruoa_d{|Xf9 z085|Uc=>@XvG!b7S5PFru61%Y=?U8A{N7mYjlu*N@>DH;UxK24HG}oz_B*Z6Zq{zh z_oro){?QU+lD{wE}jzWu$@}1!tLaLFq45K@_a^_|vmG z%%hQIyE+FRrcJ%mR#WvdieQ~kw<4ju(_AEIEiH)V_xPTqHBB=Zo#JZscj*LxQo>GL z&;~zp1~h%>mtkmy0q@byy@!!I1!kLHGZKmm4x5ewA{lWL+O@4xWWEQq*=9ETPV<6( z&cwNu640%YNwZ@?+=Q5sJ340uq_9OtzFQ#F49K(dsOg8Vs|~6T`y#vq_p^jK)&&xZ zTr(K0({$65HuH3V<|Ml;7XDu~?_?CsFc6Sua8Qe8ZPyZ*gZE&oR!qY(QlKshy8P4nTnGxd{Hkv7C3pWW@4*)QH&U5Hkh%zzarNOt1YI(KBJxq zVx-lB8~cI!98HIySbScLMdrHhz)1BrgY^7pr}OM;(4}<&_&D$WV#c3BPdPT0 z&%19>3m{f8%PNQ{VX`m5pMCJ)>MfO(hZux=M3 zYfhcH_|!XHm2QU9LPXKYfw1BGVwp`2ZMshrFS}BZmY}6C(ES#wOHmG%p??hPGb&Dc zA3&-8wBjuVVG(y#rk$f`S%L^Fg1}YmlR=*a&NE5Z)c16t=VR^J+9I#vE6n<{8Vum-P$O4z?0k@XbDhajNM>dz}Nz%Xbj77=4?gGLmGy){8tK|19jTRcbg|Z(NZjbCWIyyfN5u+XvJm%l{Vsyq zbUUXx4HFpz!7Nn`TcwdgaCQLVek?`UNL%k>w2f2SeHKDt9wChONuFwleAFh|u7YzzPaaX)s}{Y&%mDb5%v3 zQ~!{neH^7i!Jp6$7fHPQ4RKVdbiu?2@9Sxm0QL#eyTL4+Z``r3er;#86k!Rbo7SX7 zQQMXSncPJ?gjfe0s>VxZyn|z8Q|T>s@Z-Qz4y@2tB7cEAng>7G<7w*j+evuxVvYe7 znWSbSUjq(aee49%EwSL#aIY#UgmT7F*hf_0KTUg7=B4cU(hId;AoZ`MHc}SYM5TJo z0Tgw#O)Y?7=$u#ytzA7aw_HDwq6@=N%mCSj_4AH&Kk*OUa3PVwrBM=*;yJEkW{vHO z?344` z*-1eRq6%^co1Zf>k49^`0qE#|;1qSDzG=;9o}^^b;?mTqkdhc=MJ1RMb`B;b7(1Va z8wCTNo2IQ2_+Th;j)kLTnv&tMQwn2ejx2tQl42PAl9SI7>gcyWl_KwiTIGMY9v z;?-$`q0DSVl$Q`rro!1u04vq3sq^MY*$hF|$rrW{f6kq&?Dd2v8NziLVv51h#!fAc zg(CD*U6=6!G}Nnp7{to9H8^jp{HOvOI6RXWhnY;@@R2m#*9dPzKI%M_UFP>{q0y<` zp(ruH;R$~>SnLJfFhqt%;pM{Q5p`Frt6wa>8f`A# z0V?|}>S%NLE8cl3gGJyht3`Mt?Lz_4YQ_sSm4)0Pe51Fi1Vk(HYsIm2q}X$UCkiJH zX0q~M8!DSOvD?>$$;E%Xe{#v28U&{rMG5*qO^1I*TQ6QYI^P0+@cI9IEFpqr!XT*6 z;RH3KzY~1b!U2k&^w&hGi!{SG)hs+G7cdrZe5tR|$fFey{gti&?Kqh7`9)#tJ}>b2 zPb8D;x7efAl02kdxKSB}E`sH4hP=R}``}IlX6GH&IE(NXV7>Wvy+jU`YjXa5)syM$o2;*@}HUxty952=jl%b=B)-_?-;ckeu?omLhz} zUGfCxZZ~yV-)^yp!mdBwPlWY&>Jt3fm1ZSR>a*e%J4=Y!u6mr!yNXgkHHmRI3G!!f zOP;-i*h1j)SK7b|%B`~i&eZ83 zJK_D%6?M^U!oi=DT#HK%O1ME{l4x-+Du?P})8ra(d19W>jYen4_dkD8u^Ao#+FtNr z43T`k_s1hu$_6N$%e9~QoUxs<%1#Bb%=!fvbd&J9h0Syj-@1C`0QtJoSg*vCc-pmY z@WJ2E-O<%Po!K9l0WOf=3Wr#~*xnMjx!VqnBzf*Xx@P-lFvLRUuC;0bA^;|qgB_34 z7S9u7H+;2w*dv{SNkd|6pW*q!xiR$_?e8FjlGc%PT$Xe$nUBaA3|uQzTpk}t*^x&N z95PpCQvCZ}?S(0d5i-e$DsUjS{(~!uRwoy@}#h0Iv|aoUK;t;S6SRqAP-JpB|5BU?Aj| z+jk)z610i!??bw!w)5?NBcGe>45?6GVTbWXgFJTN9mS+_K9@`1pc84FQh~xDK4r;4 zK-6+gDTAIPbMGf~iN;b9aoe^vw|ooTG%mtw&DkCNsDO>A&wWfl4T&$$#2|+p1H%lH ztE)xovBX<_r5qyi7AWp5#%>W#amcGpE7UNC0Vomtog(H$!bq_W0uuN#QnV!_%6=Cv@5@?)j(r1UCRaEy;zYlUw zRT*ve2UWhJ_3ugd)RFS4%-GV`m!*R6Nh23tYUq{Ph`7Y2I}sNQMLizK{@^8_R3+6p z;PAys!NlK*bTh)dOm=V@r>pP{e=$EujIADOX*!4o`!UdI(u6W7Rk)lJxZZFACGZXk-4#CQR`> z$8ZYB?LQ30kW+BRl@l*Tqi~@7mMZEvX*G0vqk1Omh>+D|;9Yr8jpe52Ah$vQgx12)sRlULq?Rc%-5JZbS@eCe zxy(UkZl9VLY%JYCw%qF*<64Ov@0YTyF>)GAz{1T8*4+0mWTB^c&52Dk8y+)2A29VS z4s*}~lX={kZ7VCL8rwqA!fC%qxFt^nm&hU=DQtSCvI1y}@%l4Yd>o>T`2FC;Ue%uh zv_RVoQ(9GEcX<+L!FavYAHKTU1_xs7+bm$h-_T50%=n?0ISs=Wk|zYh+-ZNC=NU3s zdYDw&jFY1L$CMHq3R8iaKMsv|4gdCd&L~?fT&9#Og50!&kSLj)tW=QbVFhHgB>byy$8h<2W%|&_Z`QBr`EDzD( zks?yO8ZfX%AkEFe0Be`EE8KX|HEs#yaZ$S#DGpWw6FvR%xJhEQw^};El)aeR{uAD> z$<$^&afs2Lm?Ck9X`AwHP~)o;<9ylnT*s*q&X$SG`?}ZOlFb-4MrJ1YK9j*so%~ok zINQ^B`(2!L0ON^4yfG6YvBK!?XC02;*v-zj_Y@`GGOkBq;1hGsHkAO+2~E|n@)kw! z{f*TbJA)w_|2huZXbcr&lyE*W(EvBC*9X*&M_^zV3AfEww8AO zkW!r*@SQ^l0j+5G%neI9`e)nZ75bE)$p@L6;=c#==|wJlweG=Z!c1uI@*0g)8V9?F zjW?cd73uoy&qgd40Xqt zgjB1FL{pm+A)z@6Jg3E5;a7r2ciU>vS;DAFJ3y%b+kDH z1WB2*Vog)f=YS8egNm)|r+loA)#JG$>Sp2%u5g2HY8)~ONcmwsPd9@7! z#8S|$eHeVjeFkfZ|6b8MkRKG$otCJN&?J2#nWMQ);uw|Z@cstO9YdI*LtX?~=;->n zPle_(UYM|=0mq$v3EFNXO~65fSvToEhzP_=pYLLGmj0f6T+%}+34-L%)Z4(k19?1- z17f~|V0X)-`^bt9b&lX^NBY&%OnTwSX!t+h(^^jLJHJ|`XDYHct87kOKA>oE*Z&d; zLO=g&f<3J41=$yDq|bSfz{fQR8LE+d5bHO4XuXwo*h2c)W9`R%yYyD8$#nhdgkxn1 z1VvcL1WVGWo;0|t<0ttn-bd;?H}kk4++dEi67480j3q@V1v*46gu^5~8un)Y;ct3u zW!E;+zz$Ve*X_)x<}YsrSXAV+F!*WfU>6g64#zjsrMO_K_nIPJRo>EHoLp^G#OVIo zwZ&ceM!2va{lF)m1YAExzSQ~K*+|5o(bAlW@W*=MDvnL}HQvjZ zX=RlXcJTr)Hci2)rLwX+a_sJSpeR%Aunwsn@-MJ-5;=4wkf2GjbcjIev}vf4Y~o<# zXYm-=oEE#IsdZD zZ2yCojBJXqFbM$*tu@_}*;5p_SOvMCy6$ejQq4R(?8yy$`b%_P`$Ab*!|d!ELde?aS8Pg6(x;0IR955|ObJ0T#a_v2157$@Ftu&uphsnDNGd{qipBt^1tN<+MlOFAH`Ose zks)Z|%r5yd9k+eW`AdV%ersW(cP1in`C?*1~!hybY z?eiv+L=y|=;t|r+##@Y~)EArXsj?O3X1Dt-VS3$B1LV9w2|B_Fj)proPE}IPs;)XM zS}g+tdN}Wp)^HXUR#Hzaa08uD-1cSIGT^k6ZSu{Kx490 z->#BkCv$gW$4rz(k8|B`DSi+D1MI|xStsQ#pPnsJ3hOw|srcnNsa#X50@Ry;Y?RM;8msWzzGuc={E zlEMR!27j_vW*a03p-{~BtNzI={%Zh29T8(g@f;puNo-7~hIhp`R7og{VAinlPq{$j zA+Q89?-gnDuoS|)amrPbw$;U(>m*|p1`IU#X=L*Jom+Kk{x=E>0gx%w)<677xvhF} zBv2rq=Pr`B0v|!>5CH%}(ha6qT|fs9*s1#_n7F6~|G;9RY0jU6uH(u|TW$!MXpNKi zkIAW1;w(587MkZCA7jgg5mBKs;UE5&0MC-k9CQWbwpNz)@p|(_kqoELzgZ3-c*ln^ zYASc+(}vT_yybOyv$YVh+JZNbU!^)D?zsVD?GtvQ@jF;qU1`5rTLMjq*7(l2m%X9> zcO`W(Q(Gd3ZPy>pu0XZ40095-=i4uz9HmWad<_?y(Dd{<3ausJl3P1#sF)R)bU`K4 z^kD>+Cj1zl=}95;-5(`nOi39$#bye7t`eu;n!5k}bUi#kAjbW<-bR;$0(KVbsD)y| zkG;F$33t*dp$#109ztCR#g+iBIv>^9IFZ=GO%t_LtBnhCjcGGT95m|XjDG=v&P!2) z^kfM8TMECbr_N+xNFFTI6>3t+qRQj!6gwsY6V?Bs;y0pO82p+v?ih4%mL{~u?p-0( zyfnu52KxP~j73LwT(y%8X-#(QD#+Vaf)3Flt)#JGO;+fIV^Il4`%u!~ z8;A*=fc=%2TQ#YQS(&` zj3yHD`dLkv<4e(8)G>0ECf4X#hfcdn%`htbAM{(M%=Pr=TbUncJjTfpeoRR^})z zmg@oNipkXf!Z(#pkOC}%Jf>cG2ESR~0-_dk(>-ZO`o5d{HHA3N5@P%^mh2Urdh-N+ zfAG~X4%HqddS11m7BInEaoSDYz;$bE@n#A&&CBjD!$Dg%mTGYrHAU zc(dPcD4tbG0(E%~baOk1usW%@%A+$CM#qmjSePQ=*%<2Je_T}M(|bFO?y`gI&?l;V zw*%snt5Cd0HTOg3EeC7EEZjPQO)Pu`9eQEpKTxR}sHRAsI)1Zt)lv{C&U$ zoxL{D!xbrxb6BE2U_pfE;m$@y7PcPI)3~UJ5D!qu@@*Rm%(*}2wZpw{hd)p@YyKGZ zQG!-h;zR;et0lQcH8^|&@lj8>+z~%c=!fArLWaULx35sfuKoCY8b__bjj!mjR?sr@ zu>$s|3J9q2qjcyn9YZX$6XITiapG>hsOR_I8$bb3cFDr>MdHlP?@M-0pJ6OZ(Bn0R5cdr~a zb)ESJC)lct^dpFwL`D4nPA;&sW1s%mbLu#b&r0^Bg14Of@QyLag1wM=Wb4 zQrPDYu>&5iiSpf(SJmp~?4KT!A=wAMRXkHM5t4=wXEiQ4UeI-B?S>pw@vVY8QS`j0 zZ!POzF~|;~2yiB$HfXl^-Y*Wl53gQC4B?4t%mTQ*bT7rSN(tg{uq5lAmzZ4O z2xcfHR0{ELym4tlA@Vb&<#deg#4^7%-%OM-bgz#I-e@n=w8YuPw9m{wxYS39Q5?Tc zX5l-ThdPH4)r)nM%8ns&qA9q?MA;kv@*(KbO;G_K!BGMK7~N? z%rZoFFTP=JaSOQ~4$Z-R$0_rQyQJJ8Kw0$76ZGTswwudfeg!0#o%eMXm^A(Jq#kGl zBY;|e3>#bk2JbDi?DwL(+E{ZT@Z7v55*fnE<`2@q+boNh4{$P{TzTw*Qu8V29gRQpOp zJ~7N?8N-N=Y?m@WE8H@e8V|T#w$f`^1LZ^2tE~L*8OMT<)9^L#&u1q`gW4@IJ^^2} z>HX|E;RUryE*}R)l_OItgA4woEzNTDp5Mn(rCRg}CPlCeVb2-d5BlkT$>8;Z9xtc z?)j#i6}1OB$joaxB+esiwtZ!{xAL90s`-g#;v%h52~ec$vH1apKuv5U??L1ffF1%8 z#A;CYYl2O~vnK^d8eQx}Bv*AZjsF|FS2Y1OV6Q+l-=;FN>c`P2g{0P4;LYMdIV}oV z0Ol#!sL;>G|4J1cZxyi#H@?|o+oDwalUFqPk9p$WfyIz2iJV;Wqp@Prafx zO?g)MO72HrRKRxW3l(}-zp%Bb2tA6V@y$Qa?c;lzx8J@L?0hN^w&tl}L=9fo8ncgG zdG)BdF^SVIfit!^DW90Y0t~gr(+3!=o8+zmYniwd?&XXe&P}sbJ+ZyeSRteCfPat; ziLqhjR`~StR76;CvK7|_D>z1l4K+fkn=egFRkJ@*UH8ho^7$N(vLAnjym!d0PKtfjH{dF1zT?v!bISyRep|Flk1Zvq1BTX@-bf>u8yzuBz?4a) zG+5WCP>sZs1-3^QzkLi1Lp$^wO7VS}n>MI&y#HCd?&@a z{Nih=^bq?DpUd*v-lH%8ha9 z={N|mq=ORR2={{)(ILFn_hn^SQ*nhK>L!GL|9JO}qn0eY4VGQtae+&;csF{zmU9J?kyMA z(LVVK@jW`ts88b?iM}~^aP76H|}Z`(=e(P<&Ab{uqKKx$IOlpTJnGK?|Fp zHYqJH!4zHeqq*1*BjJlY6L#PN0)p+03ea;?>qn_B&)wOy_i2pohVfpyaK_S{i z3k%;zaVM`Fr`1?80C%42^V-tc9XfeHcR9nXG#ODxSW^s!n8u@ZfpK>YZtt@wzp>ar zY0YQd($nRWZ%j9hKiwe;sE*qzgnYkeq<}&SpIH*pHOsq@i-=Jm^YG#jnfv{n+OoPX zL_x{~bKo~|ShZwPMu(2I?F7>s;4fZr-ANDV7Ba6EqcvPp}KmOv&k74EqXVJb&3Z(6-#}7;0n@Xn-Ms%ZJdS^_a|2O57 zi4h&T;WwM0FK|3H+?F`RWa{sHNtn!U{6M|_Wr>Lj^dHsXG$wYxVo;Y+AcUAkv53Y{)dc8K?fd59Z~*gTg8P!JHIQA zoa#R-CyGNrw#-VAi#%Q-_X;@bJ9lk@t@ZD~4pv^4S!{&utdnOJ{k0eMTpK0H!z`J~ z;7CuqR4wCd#UN~m1>izIv*(FVEj2+A$HEJl%lNaKbm(3`72mTa%UiaN9$-X-!yKxu3YgMk=p1Ra8 z2zOhdv@B6QIM-IE16(Cmb1iHCuB3Xpzku(hBB>w*!!kvsdBiTTky}O69T-I0)lX1+Z+eiQ4@{dc5BpF?{n{TU$O-Tp-E&D>P$-h?hGJLjd0}+`H%taI3Q~`_}ZleJLWvmLj?v*MxOFOcTIO#gv=&g z>MW!nydIIb`$;#4{41)Yh`wC4{tG7p-+xixR$he@==%>#QIJdM%Y0UTiu<;ik(hu6 z)x^+kwNik_5-PZkL<_>wOpr;i)ICxf?P-dR|zG$a_>cR$t0g< zmz|&JDgz8->}p2N8cM$~i(^g5)0S`3#d7IL1T1U}86qIg;%jKs*U|67V>hsI=G3x{ zORQUsag-QcayN2p_lh}<`g8cW<(mn&1aup^CBg5%nv|gY+uwUN%HZB&<;NznH!m9T zNr?EVLoRVdXl8C>zh>)uQ@K_!lVqR%x1M*K$Lw2{k}NC34QW51%11S%){@N`d6ikb zE0-Rqp=4wFf`BtR>ToK_Bt6C+Z>&tW*6@nBF$kNQZS%zqj+9G6k&V|_uQ~iQ$hS%T zD#Zw4mRU*{D97bm*FK|3Zqx|-m!%z?0WEpm6Ab!-g{|6dK)!2qq%rYKST+6muKCv+ z_9h4b?#$Ex1FDZXp+Yk#2;GBu^5CU6`0!v&ub zjBxAAV$YM->7F2%X8H<4<5?aWj2`+_GqFR8|7Z_6Om7)RHXEmT?wD=-N24~w6Q;G| z7wo=5b+D*$E>=*>nK8|WXXDe7pntk+sdja<66kc{a(`jwksT{M={;29gf!*9xdMO~z_RMo zs8+`wreAP=%MoHMU4EmW-}e?0|82n|sZQpqEtXi?JWI&^qgrt$Wc+eBKmcJ2F<$)G zcDhS}ou6Q{z*|TWYNpo0wNyr7)qh^Q5bs`cZFrjy%2fZU!2VivsW|&3(jA`o-W+HP z1#HN-OT{%umJPquMxz!8%ibBBu4tZOuHXiC<6>23wA9Xm#`h|C^~w~yipc}~(W>>= zY@gZwL-s)dd-M_i6;+~k55c|{0$LQBFRv@g5UzR^oK!zR#1|x_yJFxwK;Sa z{N3^;q1_J+-HM*(K*Gj_cFs|4zry?sF<0IT^10Y|f!(3?x|m5pWFSjLr0f=N?Z8|d zj(BZ1v=8<~QVNSsFEU!@ShJCwVRz27vJuQJ;W+$Dvify2fXieRHL6z>790{L>Sc9^ z7?Et#{KGUK3N}KAC24-T#tc+wSg#noC|Hr@NtI?gwAHqcRM^XO9+p- z<-c;j$JC_bc*+$QLdjn3!dZB~LOu@h>BIy%>iD%bOR!Ey*_%s&#aJniuj0s6XRr4j zNavCkgT$n=nQhHwq-WeV;1US*cr%LkF1iT*Z)=yKB|AjkJtQ; zqA5n4GLe!!g}MaT5TMc8O{~b?@4wi^!c%z`VEPVsC@z`$2PX5$+_s9Y0I%WxxRpX! z>RvDWV&v6B)<_3v_l%4K-_0+8UZjKkx`jfC-H)z!#dP%vivTIm8xoY_f|j4~;I^6y z+_rQRrYr7AvC~35Nrj!Mk*OiYCOA&4h55@zQUFMCR4p)0DDkD|nJojK$x#9}HLFQ^ zOg@+Hft8mn%DMjyqwI=N{|rs*#(rQTW<3*o?Vk%WfVA$Yh0?$4c44vRF9?pGsf25+ z%aU0_x_IFc>o}9Hj&zgsouL@gOiub%Rkp~YrdX^sRXx;_@A(HfuhhYtvz{q;U-@Z; z;oAD=(hunA!!JnmDnrM)b^mz0gBh5{~&y zaJ*Or4L0CG&Ude`QK0!xmeB^PIi?2u3Q)Sl##{|0x59SntARzUew*x1IO^sR0%aXu z^!U;Cw?h{xx%THp=zaCli9b*1Q>C_~wUX}nQl5=kmj1(GGDy!KZG^c;7oD-fUkvgB z2E%CBdCZ!uV@zrFx5Vj=Y@Br1suFz1t|8V6til`$v;DfyS|yA6V>9H203-fxPw{<@ zRSB#CHMRLp!b@FLyIg!L_~?G?V!rJ9XRev8s>b@xnL035%kzKEE_2yP2~I>VN#(w~ z?EMANnKw#XZK)}JlF7S0HFuKD> zZ*B0z5KLfq!Q`%DyT1KaZ)BIy9KW@#k#&S(feayj#uui+{XI+geOfY&)Vy=MdD&yV zWV~;ySLuP3nB2fdR^&XRjQ!cGDy2QL-Q}~mb>?}!{-klB*GS<#rMUT^I`eVN*2RmU zc+c{nOtTR((0;~j|g7;$b(p2?$sSY z8t`bc=8Fzcr-$3QSD;{{jIKb*`?JKEUu##+*Q#rnv>Y>9Eh>1fKe+!$jTKeQWk{W# zT+?*IFGhSG)(=9%>5J(!M#PKHe?%Gnb>{H_B0cfT6l&dz=BB+p$e`@AH`+%7US zw8X6@br7Y5{MFl4$3PC37IyJE0$Ol;HBIw!s5!_PSQ;uZRcd-uf_lTUjZP3HSf+@4 zhWN`8Ly6n${RMl6D|zRn*xRS<;AjGqJ@Fu53di4yF6i&M ztbYF8I0{BOPqqH{u~00&&<{RUqz;cNs4&+jd1@o?1m%3Z%UQ11580uEH$p&PvDvj4 zW`6Av1zZBO&1x>zA5zlq_(_7IX|Gg#Z)?65KWpqV0|inrYVGbckd8+~7??vIJqq}g z#k0`P016_)VO{Cd8s9a2(T4%d!>OxrC%d(C%AuqwdB+6w6!;j2Wjxl)EvC?brwF5( z*qY|VmpDhf=>HYw?zP)buu*p#IJ1*nnJVpz!r!@%vPQB=n_MPXn*CB1Q3ELe<#Xkn zV|pe-#bkk6DQO z8S-!~ve`+-zU_`>4;uv~w_mK%48Hg%T@o@hG%IfxGZg~e6k=Ee0NKoM+fOyB}D0Hd_37o zBmetkc1~|swSW7o5$BVBgKs9CwGDQpu28C{%DG}wPzns7;0kXd|8%-8a&@QsZn;Is zm2d3f4eb<=`3+zYU6h@)SvJxzLibKnmOk#uyl0qRr!D(Tr z{jJ-gOSYKVcuuE=^SgX8hfBURtp78e>J;~1-J3l>*t(;7;zLNlC&v2(rn=V%bAuBh z^q;O$78o$|7#Fz;9h?~c?Zjunadx40{N%jpGp{gaD!A_XgsDE^kCN_@WvQNhG0By+r;kT$1`xjc^qY>=d?qd9MOc=u@>(z0n z{1JpzKT9dA33l3ZrV=s9pw<_~Mg-eliPwv2khe#|Q<IgfA6WI``J-M^=cEyo?TWcyiXV|aVks4-+bXmGYV#Pcc zdj0b4Ags_Ctrd)<@nyv;MDJ!WzXh+FK_zV@=Es-+lo=Xl4e|I~dIdBOQQC$P4>JHKiDaI#&GKjS9=m2J(E0iJz5gWj(J9vz}Z* zG5%nfvX4Z+ZlwWDg;^8>9r)a(=)?-WXO2w>CPcdJ;R6yv{tQc`!7K@6WU1GHVy)cn zA`=brE-r}T^9?WAp7J7w1B-diFM`S|mub^E)vG2ls1&jLXWoW<1b(9{zG1TggpThq z{S%hj6eq(~RXzC5ZYI4VD0*C6HI2-Fn|*|6R5Up`6}4Q^?m~&{Ota39>!goV6p}|4 z51Q;^Dz5V;@U*Q-fAkJa=A}4hvZ9jLsK;*!Ye@@-bZ{1GjpdP~=s~GYk?9((uUe1p zNBuiy5WdR(T4e3|b5}JR+^Xl8iCyuhQOu83KA7@v;NuoZ^_>L;y26zA@E~^C4&V&D zMr#sE@L#ACZ~|xp&q~QH7S&8r7OuERTY<%FdvaBz*!A>Fb6Mhmo6unqhYd9{Do1o4 zw^|*1FE2tSY{!Q!3CK#Z9w*uY9F=&^v%d4Rqk3%DdD~!h2mj$y1Izz3w$paW_Lo*DYCUsnCjuyqdfI|NMZgqY3LwP;zX$m{f%Mu^RcQ#qpvzDIM>L4 zpA4eHwoF|^S4(?^EMt=>eA8f#_3=!lA7sftWFjF~Ib!w(5*UnEeGi563T6<($sDEs z(Z4V)W58jYqXr$cJ&m~Za?lfNH}s)AJs(r)k1(JKj=!WKb^)CB!~58J^rqottst=x zc8`ZITpryU$zCcW719V91?gkw%*Ilar>%OS0%%v0?bX8XCXE5R2|IQ2UjVUHxD&{l z=1{tUpWF1U`3UQmR+4*NqejC~%-tzHeC^YDuBT6-I4axq-I-Rn*p_)1;K1@#2H(g2F>TS@7cuQop#K7H*D^tUB z*g3Zm$M@g*H$9HyBTyUe9&^0RQ@@wI6~B)H$lJaKhqe6=&idK#QWZR&FY8_JVp?5v z5%V{LPsQxAR}%id2xmkpapupI{+i6kR3j$+4O^T{zNF_Og|K?_REcn~HB;Zjc+CAz zguj9>N6mbTClv)^6KY3j*IgvnVknF4((jT=pA^oXTg7J|mFna{7R886sZz}9RO2ae zTiEqZM1ls&r5*+uWQ#mm8+=r@9o1?|hf&-j_iKl6a_;h@lP0a!R!EIYo^$&RmRet# zvosOMBO6*SAzCgVbF$p2z@lyPTpJ+T9UOeo7kt{GpO7C-a+A8a3GkA3^{6ZwBd$r$ z$p=6i3!aJII+-)VSH08uJZ&z7Xc0xvRVxbfhKA2Lm(#{mqF@lBft_~OwNo2RSMFrD z%cK#ki|?^mU^^IX^wv+BqG&?gr`G)_8Z>lZ1F7MPqvVJl)?S-PjyOhs7vR`mh_pZq zO9)O?G5wz3I2IQwqTjAY5}0aFG;FU;!b1hCuy{GTHcV!=I2D)l9RU~Os}3d+IuR0L zBi<4`9H?Z5T))SiU|?LKD@cB4bM%}^_w-yA^k&f7Y@+T~@ZiEjdY6TtX+DyBNp^v) zVfGX+p~l7XJWOw9Mrz*l{(T*}L$=QcYB$)VjpwWlsj8W^PaueIOvDe-2}*Da=%R_m z5MbR(xxNYBT*5xB3w{F}Jz$1bFOV#{B(9AQRrOQC^uHXj*hP@LtpN|+rK-c(5$TV6 zah&^Lvy203%Qgv1)nGQmlAf}G>5)tVAA~BsZVUHBS7y-!I?kjCZ|8&dD0w?rK+aVNc>y6)o);r83 zNj5*hHq7nb&3L`&@upCyf=;q}Sh*m`Rwn(^{xXlczqA(T)}y`@l*vMj?6R2fGESSA zdvXqA>qw?5SmN@cM4xw}pT41jH>3H}m%kf+L9}ty$d?4a}~@k z-%M>y@*;0Vgwv?2YGN<`n2(5K!m!26?9e0)rG9ykb@w`*3mjM+i%*+_{?NZ$jKfR` z*||EnuatvVXUfxE4V*p(A+rQLplNDp4et=&%qlN<`0k~(O~f@Q9|P|e*K<68a|ZXK zGUH;0gSqf2yN=2TN=3k0qD~bc>YtQax$!NQc>wJMO^ToIrj|_EZv!VYZ$5!hLm18C zad|G%_u~Ah`Ez*#)KmQbTbWF+#+M&(Q$%eD-bOfu6%fIXs`Hq^qznaA;(nLj*k#W$ z_5!1rGAiTf+LMS65nXeO8;M6M9&(ww&fH6|m+9!iEfnLT0MSA)cn8rfh-&agUUY(n zL!s5rOC)KK7X9r`?Zv-n#=uOXeDJP=@Hr+i`geLdLu^`Ww_uMK<#hv>&1v!+rX8 zB`#R)CE&Y#bwd&dG3+A7z@`MBs*zIjI^x{^YAEU-)loOHlj<1&8Ku~&v4pi5XH&g{ z^AS@Q*vx+ByGzg-8})xiyFD_vY-w~=5Ru#1e2kqdZ=YaS?Q<_miXs+5*g&gY2+qAq zYW=jOjtfm>o&5M{*GiqLgZ!?E*pU491C|)!14l}wV37Q&A{TtNwAkbeXzA7bJ?+cs zv-y%C`j%Fo>}uWvs(v%Jit+Lx8?d6*M`FeGsJUBHkGg2CsO^LaV;^j?h#9232^EA+ z^6md{f_v%lo>46ACRkO4`=}*qP$pqpQVSg94*ssf#{%>mfOVkYJ&kXXwg<5A!*5bL z=_U<29bSoy5gfANk6|`-1!Rz+6nwpA5?K4;?bF(5$n%}1Rfa#4uUR@eQK|h#f0lwV zSr^9T2GT%VivCj|4o?!Z&J2iScai?4TY@S;PsIIDQ&Sx_~6q1rOO|0W=h7<+Jeg z6v$qtpo;u;21hV_JO^mvn%WF>*QFXvmN!$7!!#!{X#hzBWF9lW;qg5J>*ex@Fav(e zh3t$@#T6d2O_CUaN}dO~>bNHY0(bIvpsCsjEpCbL1?cA12Hgjx5e*W}{*5+EO`Uz>F*}4vz18poTYlz>xb-5`rvnS{^&uiG{AY5Wz8pq<;4*c?E#oNq+)2@ z9u0Mv1&s7ykoHcOR!A^Yqs7V-wD|@`AS$ zYFs;gt>*wUI}H^k+>vqRFpO3q6K0Jm?P0O?k!9qvc0!K`p0ViZXvt$1IziX9=U82eDR5k~tNmh8N3v1`r7}zQ5E0xDPF~LE0T$ESDYtOp0az{sv7Ctz9bT_;&Zj}_0x!B{WQUyR zURo`66SO1!V+o97nS#oWBMWUG#~~|Kn68!YaJ6&;p`Ln0j*#J=+i^S%A2E%T1F z>apUMmCv`lDC)K&NmOMH|=Qu3|n3N{5& z*Ozvq15KeVFj(pAH0yuz*fxvMZFL8{GaV61TbFabDcUn2^&OkGAsfgtNM2c7XwOgx z);1yovxpXc6-$fzmU20*p!2MtU^kKPf*B@c(fwq@YOOp)ltM#UR5wi|d9-TauwjGr zDH(NNF71DJV$!zE$gpHt|(Y|k!U%+I|eIMn!!s7mT|qB&l|@^8PUVB z4@e0`t1J@>2EfllO2+5(b#k%U+)s5-oA*EIy{TnHhrO3eR<#1kvw`A3K+&&GR3|*v zM@$PQr88gW(2m=@uh!nDltD_mx)E(!_B?|O`pHj7Y_Bb++AE>cfXuj;dQT3bT?akm zruA1Ykgas-5Ga{iZ2**!C3_Zn-|!2cN`%M@|7Ne#;m@==%zh+d43rP*ElXLvV0GHf&Z=&UD zb!M{_tWXB00<<1=(I4>L2Wx7d4}|{Cq!beY?5D zzi+vvxUQF+)J06h$y+s#&CuGB+kN;W6;7xyBVu01 zJ>QeUVUBSs@zD}Z+cVA8+7Cp z83}NFO10oFYXxTIuSy_D#_}(zKh$;Xd*>VS%o&#_8&6*j_9gooef z9Q&35DQ-^#sU*t^0&%q!b z`H#JqEK!EpdGMh}dftk^YrAd(!>0W=Jek_mZ@sSS8u??SGs2;apXdrSdT&{gmyXGb zHO^CYS|<`4B0KM|t)^X)EWK{-YjrE$^`$W&K%) zI>kQ6mx3JO#YCM4JvIw?%z=@f4gvrd5mjw0e|xNJ(cxHUYn$pk*Gn$^TCfEtc@4az zKM-v=hEO)g05py(aRgE(hZ{HQE(1sFSR%S}LBi+bWpBm#XN?o*d(Xae1^# z?ul}we7ku2hlh$h*mv`Y2e1f^H1N0bDD_QVV;x{A(X4Hc8u!v=+JJ|-XItQElD?)D z;V6@B9%@b`QD4~NpKD%k?LACZDQi|s%Ik%>^j`B2fCO73QlBG2=K`5O@AIR^BvZVF z`4()>*)1{JtsErZA~5zUAGme*$22ds5t`h&>9-o>+-6D ztNhRTW}y01nCtNI*!yNs#)d$*uBm{B$I3Nj zrl}WzsgCvf_9yAm_r9{~^3^oUi8Po`lc5Uhiq(vnTVv^AU;Q@y>TwDDnL*?Janl7s zQG=ArdTb>K35t*ST#-R^9vvcriL1|U@s8HLa!UIjIUwcE;*0*}&%M)GR(4}%?+TIv zaq@0s#LQa5Bma;SFVy{Y4uROxXTh2Fg|G2Rts^%bmG)aNNuV@+^}dBcKhI468P$Tu zaUj0H+*oI^8Z65bD$n}=!s8ggY|LUc_Wx09z1IzCD6O*bMIV(8^qPe-iHnd&m3kgc zCk6?iEV`!5dBUwu&ce;1703E8KYbG+(9ZaC+A(~eb#~vD-hBy;&HBVpDud2=X?|W) zj<3}7PEQNTj4(l(PogEi;)0wNEim8MxCg;2X!&!w4_^YfD6OLLh&;f5hP1?%D#okI zztRsLdeIp)n*?TEo-5n!A%9^w@)7^o;@K6ZX8se!%XaR{K+pTKHk%8RfR9pnL-fNW zq=!&!o#4y6rrT_Gt_Lo4UU3J4`2l0^r}MHc{IX}2ml?Pf!rKXzjc`E@rbQ5KQ$Yf)AIyJLzaG)~>bCFOM3R zS`X_l-!tX5W4WDj6PeFe{wi1$qE~IkY|LW{F`cqHLc8oTJ8>=p@;FnEJmC#7- z<}_AnI%IC@11%cR3{@o5FHb-7fF%^|F0cIildP7lUURK(uH?yUj2d9B=mB4atRnlq z3h`~Bt6jK*_wP#|Hv<)U(SY*YtodOqEu`-suIsIf_h5ZetoF80rxz?$p}cc@j(ZV~F1@orXCQotGk8i7_}6)#(P_Y~L7m@K z3ixk{r5cQGZ7*Hmlf>jCQ$J4J*91Dbyz37D`ZP$|nzlKABO8i!W-3e%4_{~t3v z*JL(XSq2uzPb=z`8d3Xz8}P3ow|gPFzm_iK8_W zlg!0chYWcHWh1fDY`Ym!dB!;0jqqvXC5db&@xJQA2XpzQD8}0sqSvencB*(HJ@x!pJEz*$EZ*;AaGix+LT+I}l5| z#dxc$Wrx6iwUnB8&<6ZFRgL>R)b1>Q8cl=M{O#0;eIXA_9~qSD3`N*c#a9n&3u}&%!bUAZW~y@qPN!%p`%MYMCq0pY_vI}<)E^_aNwOy3+7x5msSc z=lC-!Z|!5|iX}l$`*c#-k&9kZ@xsEzjR9re7sBU4OgM1CzPWkN`r?zlJ&UU5_@vG1 z`w%)t6z+#Bhe&IUBpT8^^vkwBuikgrIT)^k9~mWz|1(R23TMuKCfRomGI=(1%^#TBC$n4VYWOw6*?<2jK+PPxc6X zeBslvOQhD`>2=#EATQ)j2av5*P)!I>tJ^|P*MHX=%=O#4l|V42|45*r1jR2P@MrYf z^1ILAgfp2Jr6C>&6u1Bv7miM{vMZkwy>IuL4H!9I3E+)oW)e*ZSO0fu!HyF-=IzT{ zR-%YfT9PdRsen=w-Qfe=iY2fSQ>wNjm8PPhfsZG;R3Ar~Ox?G)j^eD&kDwYp`g-eG zDp*bI{w`DlCau|uraRlPds7UsXs9@>-=kr#+i%E)K(29pgu1z!^i?;U!XqMf?43r! z5T{S#FZ0xHJ)0vw%XB5;^}|E27Xqn~f6s3<;IaB=t^cbRFFY1H-gPPdteC3f>7Q+V zM>)DBp|8|hn{tE&B#^@FSV|36kQ7d#QvvMt7#jBYZ9^dcBXU-J1`02H@hRJTpeJx z+WA%rEPU*vmFEJ6^yR<48Vg~_SRe!q(o?{ffD>!)B7Qg*6=d>`0XOTb(as8?gd_SsISVeF4zdxtF&)1bfU5gW`$SXns~gb!v#7Fg`Ka9{SHTf2=Ld=s^_;6Giag9NK+5%;i)BhWFyeC2zK zY`8!D?Zv_qYqj(7u2ueZLPI%)83JFt3#8Gg%Os4eQ3TTpx563bs!!)=4KbL_i1o<^ zE-@EUk(k9^p%SSnJrYHHQ?2u0{8})6o8n5?YA!v)fg*Z+1;Zv8Tf|C)Mfn53@Ng?| zI+!QF&wHb|=lq~{NDT-#Nt5QJ)6kUXmBAKQeO8w_@NUomJxZwWzA)iLP6jr$y@F|? z0WzMBkd$%n>_s|WQZRB)_(r(9DAgNCn-3=w(|C;)*gX48N`@K1KOwDxIb6v79Q4D( zgOH0ycx7E|n=~V~TDEWR7!@G!mPzi1#oZaS$)@wUe8*Qxp|Z%JUkRkSyRdd~?+IXY zARV!gT5ja=5Ns^%VzxfH^eDHsr{k8uHEj!|-83ZrPeHh$;a8SnJX#%wHs;o-4s)U^ z15zGl&vrl&@48AI28u?%t$Z9Iy_vEPy=8pa#*?0PN)ToE*I!@U%BFJM$nl%ET-l{V zeRb!ER@))iGZ}bpjV?~ht#9$VC}_@X21}O~GBV4u@6^3yF2pPFMr-k}M|ICY-{-!* z2Zwu?=}*ZWyW|bcOeSd@8*Cyjl`PcI_6w-{p?mZ>P%3yl0=mf>&o{XA(UP#RvDig1 zxo%9DkLqR-P}rqT_w0NRH2`AJ!msLwhPtn4IS`EU6>E$up|$>w$!LIdqk{xU6UX;6 z=YeRekJOT=1+3v4!s6gYo@Ue1B2|F$nJ3 z5_V?pogppxLTJULY7Yr?-_N1%27cnvGRvzHJ6X2a&BKEDc04ta2(9H^mnb`(MOTX? zugSk;G$bPkgsq9vzk~km*`wOpYqw0&$N{}AB~pjBKCvkXj!CM{PtKB7;K&T2+9;@Ompuv)r;6CJVTRF$kaDKl1=A-BGifO zFW!5tRs9R_NA18W{CSac$U6_L#$#G7LVnW-&wOpLLQA;kU=LWN&ciqx^J#K+LHLMoHeOHl?h+78g0Wm!dfY-Qi#=e~F{yB&iztr&v#i4CUz z(hO(WpY(a!*0jzf1sbRas^)F}#86}M3eny$=PQDd4BE0R`|vlbFi!S7)3h$`BtQjL=Q^CCtAQyk(`(1EC81_&Ck z@SI+i+L%908r4>-n=Z76G|b>dXAqmiaXlZN@JCa&J~8oU8oO@et#w>T40!!mPbQ5h ztAnT*fG2#(4R469k8keq)N*Y@-;nPhoZ~9eO%iNw+6IR}a2VFNKX}*C(ntp)2poQI zh5}ap8$j{70F&7m6Ja{Q1-wdhw2AYSEmh3!1^g!j`D;3Worz;uHj{*HQEy3m2byzA zNv}5`l|$y^M$HMF=EO~0IyM}&M%yhsGGXp)+AOF&$)k*OXW_f9+f3S^8*zh+2FlcG z(7fb2AQPsYNr)K4yAhYBu*OQpM^SUP4K1iuAPp|f{Qrs-FFmAE=ifA!@lcB-(`W?q zuU>p%p&+_+*{s@-k$&km_7qRz5~!+Jkhy?)ZF!H{nkTUrmt18oALwdN9l5*fVRtmx zgKgM%u%jUScK*#pLy|G0<2Dkvy_>9pE}w80KqGvk+~r4oH~zqJr@sl_VceBv{vl9vzlmmw^7WfSJ+rai(6nuw)4m4Da!O zaIRV>{@u#aq)+p#!Ygg;d9=blul2?>St@=Qz!B;o5&!0E`SU??e}}?5I|mV-V$Eh) zW}GWrxi){Kr)Dq$kfp88voNw1h%$RZ6sIk8;Z9?a8`e>a=;;^p^5eo6)74Q07u^ht z`K{tQ@{#F(+(!4c5A5Y;VJ1~)TmgP@(xr29FmUHA;PdqO zW1zk@kDh1B{ZoA3Ca`T{BI9}-InDn$ktE}UM>Cz9Y&~7;3-Ud75hHywiHMdD!piujvcijI+dCK!$stt;HJ z+arPe-BTq~itjkRe&unFi<}wpV9rC&p6d{7uFdfxFSac-oyY!K8;pj&(iqZ_25I9K zT&w#(S<{n=G!oQ0KruDk7Ll2H4;avas&yLXjuGiilLF(Isqt;xA`=C#4+&Ywc|0Bd z8Q(8`52a7dpDM8;f4yP}k%t)g$ZJ3s!mu!%kq`hD-Q~1Y!cKY5%ASG39k5hF}oA-mFTDNcSv9Jzmf>2tp3oEEf;{po!)5ro*AU$Qt~gj%+C4 zY$E2Dzm74gPjKZ+e5dZPL}DW6&K}xG?eng25HzmOjy^Zjb2+r91bsNE5b5WjB#;35 zdsqHo>Yz8)K=@5ImPjSy>Ed%ZDavwtWjnd~)GaebM1YOM0+;nvD)g$cs=B>^Z~_O| zSm-EM?y1JmXZd7yt)B+;vVIo6% zOqA+ABV`bsJ1}d~^VK+Y!;&-e3j8RwPHPxXICUh- zcWzxGIY?$9apo6S%H%0#l(yA|#m-2A@=D0@{1s&Xrf^k{qpDMvI~iQ*{E#YXL{yR!A^s^8P9#2lBKU*|rNx2;1+ z4;synaY+=&w^zP$e3Ud95lJTX}mi=OM2ct}03>+yUy|x#EYfasmA}o@?{3`v# zX_@TayXDxk9llcbG9FtBa)#N%;s4f2Lf_4UT`PltLAc|y#olQ!@kOpb^{lnwU|*KQ zoWKKPDveEyRM_XWfwaBUHoFTzqnUQtq^tF^p@}(S1HrTF`+XQTr|zb{8X5AaCdtK+ z?sPQ6*t}i>6wYP?oo#WUoK1-MB;>|BiURux!Xk}6N!_Q=ev};b+jX&U(CV2@M>Vm; z!SCal%pN-K;9S9I5jv3PWmZn-YlJt}q4o@sks4-yfSx2!W0~fJLO;$qQo9eU-eZuy zEE-+fupGEC%qlu(QjV#HhF@#~k)r^rfw$T=%v$JSvp_6H^t=nyw>p#DJM~q=hm{C_ zH0I>4G`-Ta=G z3S85o?XbyG47r*qK5vhgsNw`TB8$qce{HaZ+|a&pPI&VrMDUcQ!{_RFMPnBzhaBK4 zSLQ1r4EF@buXPGPXFo@91S6wsP1>IT?3^RW7$Y|ZyHUtdXQvd*LUSpFbnl=@2n;HA zL=+H79)KI#FiyMgwJ2?Jh~0{xKavICa83ZQ6#dr)zkA+6OO`&t7p3jM6efey(N+#y zSs94P-P<&B(RHo4D=lPbkKe~>s0jFDKq=X-S<#Fo+Ik;;E|&|0rsW~)xo}Mg5y=?` zNy-m1v3bIy&_;KOPRmf6*w@q|--IqefYgws^yQ&AKz9CA<%9j~JcoDZb z=s3)3_x$GQLJS~@!k)hU=q!f85H07ASNi&Lx(L|;<4dHtJ!v!=Toe+-q!-x^R_X;) zp<@yd2uy{(h!(o-*pi?D7MJ2hFyqBN|y#(8`6YUZaAm_ zq;5Z2wySw#2ZKv?8Wr_?PM408ivOtoH(cc7nrZR)^$hCXo|(Ys6A}SShLw*WcVB;E zM!OnW?qtJgi4Jh>@y?=)H1na-QTqDh7Q!>`#eP@z9S*_->lX}zT>sZicW#iaXv;Ra z%|&|fLY&^Dp>D*uSEvASN<`a=>m=F^E|*b81U{%5b3VoyN|cE*twdh4=TK4}ZLvc) zFIj5ag>fWc5Qdcj1HQScZu<-(t@h3Cq z5J~WB89}`+q(`3&7tASv^FilOR0)CT8pjD4FJ*jGyKSUfF!{ctn!>>nWEF%4|vnr_sOtr1#w@JuD^m7$JBZBU9y zgcY=Aeed7^e9TdCN!|lgYv~K!A_Gt5eF=HtT{e3h+!Q~%R0`+WmC8enP8?l=sOx@q zz3WFd=z=43lJARwE|U49*PEr6lt15LZm6@A;=%#zU3N0fsWVWIIY!7^DqR@wjb|p{ zw33lLNdsv6`_q184uc@{msVINT%>kBkB2FhX7rGK;mG;B%&tLyVUsh3;{YZ)BQmM| z$H+ls$0=BUP#_=5_Qz6QzaI46`A0&xs%)3=3=+;r73?rNd|c+M#Oy{72MuBnGmVy) zVx4R)#k(xEgZ>sh>>}!_y$V>~KK5 z){2?rnodW0pn5)4%D{bnA3@th&S)Xv7mnzI6NlBzsjBp{%a}zN32yJeAa5O40JK>x zwHI9|-A)bEg4m9ZEl)|mMx+7%HCQ=ixxf~rli3iWr7!wT!|}=rcutNucQbi z$U%HN;OCD9_8(XGBzA@E!60u5#1^UBkrOC!^uqKBr(s{V+1is)_Dch)n83 zsVhEZVu+Sb`9!toS>1~119U4(-A6M!YK&B86VuucH4uKk>wf@~A;bM+iWjkYp2kF@ zvc&F{3YW_gz!~)?{ffj=MwJR$7H=J&HIO8g3H@FMMq&>r3iqWN3lLgCJeUN3k)=AE z8tu!%^nEJ2F*|2P(7 zZ)e79+rEvVW3&YU{wVQubse0NZ!8uzy9{R!A~weD^}X|jK!L%o^Z3k=mYN&b{53RF zb96oWAue?gPa=z7 zVhU<*v%+$bM<#*Rk^V7&ONK_|ZINB5zxw-E!qL7&CwaFs%V91|t-y)$G37BXs z&lZXt)}&s@_w#fG$xczn)dgsFwYOOFgu=5~Vg>giB}}c%=Lc97$Sp#!vrb`#n)1~g zQ%^}R7sKED>wYkde=V@!qN$zM(4J&fVx~U4>({$KKmo~6cmST_*P%mzv_>TKV@z9%v)QQ@hfSAyeUNi(oH>+j57`P9) z6}PFF+iJVD$ai{cD$*w%iTprdYZ^#hYuC?uNo+L+`wW_=rGx@Oku~aq_Lae! z2PZ&x+{H#4_q5{H1qOj#c6;DPpiAgb!>>UrT$BQN-%`t*yS?Sb(+30$ich!c)zV+q z%h$nqS}wC#Y2PMRu*g7@&ACb-<1XVz1||rZylKS6m!DiX|C?BYM}`Q#aaBMp5f~bA z&!dSjJ<5K5`F+^zBEp zGH*%)HxLXZ-^ONZ%iO`nX%Q5gy}UJ&lK#4GI@V%&MQF5RjxJXv)X~)}c>}z%mnviM zeXmwAx~POTR-Eu;TBifrx&CfuoXUdUwzPHF3&U3HUu18ze=rysWlw)!NW@R9WW@S9 za-Bw^tv8H>ua=}1%p}JkicvVJrl~?MZM4>i>Mzh)zpo7RWHnL3Da`^YRy4m^^o6Y%k8B^Y`G8R*&bg zK9>_tAv32H484Ow11?}`I+__On%g=DUGRI{ZOepn#G$-40*PTtgqJIE#*J7(*U`4H*_C|i) zq|(AB)ssh*Ak|Ug^fwS=k>7gRS4bNh(?uis>r3+?YljNu7W9muD78p7|T69Dy6oRdmeDS$_;FACZY>dZBy4{)f%k3 z7_MN9m6SBMtD|HeoiDC)!pjGxFx_NleIG&R55R(?+~!S0?bgl*y7N&>`BSBY{__C> z6HYwI9lFY;FFoT@WxrCLk~)p96@>fDYKN~ZypIyAxQrB&91xcKo)Gd*oJ6sM^oM6< zimRibbWD;15^I*vX!EkS3&c*+Yj&T7Jwqzo|A@gFvb%4|NoE3&_r0xDFqq!ko$A{D zmmDh$B1hX~brpZm?W&1x`$}dPZ$fL1tRD=Y>k7`rk3+5jKM%|Kdg2HMcgIq@!;>HiuhRslaOT}o7fRJ5u9 zgoWT|t_OK1hssGGa@dGoMud|%-Xl^#dk1-z`@5B12qg6% zLc3YRzaAD^-u|txv6IXNSR-Cv=h*?N3$wwnF_V3G-NF4ZX}Ya2Aq(oiLzme z)vRKVJj)^Qyn2JY7$}JFhlLh|s0>p!%?zE$6|VqT`sTnYKZ6J+L8b zOp9yfCBP2vE88%uJfi8f?C)>owjd&L&L|M`%8ID?e4s!2X`vt^|2DNbL7#MVd}Slr zZf3+M9+LMbps@e+E|U9eZ`|@4*umYz7#E!rPQWmyrK1dMwk=Wz{r*}cx%}c?8Sr4& zxwAR3ALj{48gaI@9Mr4KYIxDF*1VAslhWwu%#FE#0NzsHPsN^q5!3&!SXE_0Am*LN z2x9OM3ZH_>57rWMv1E%buuN#{WzGGa<3w&t>QS}0)1k6ui|Z>6RTA4=o{I$>id>%U zUa5}bWqXw`m;5)RBo-7?qhka_E$~)ovxp=}cVR{*WK}!XqSs1JyjPN&xe_;5SfZHS z;ynv&i!n$IyU}+cg5>Lp=2ux`6sKEotwhH3)N04SK}^kZ9qcsyR?5wkll%h{y;e8~Z8*_g|rq>WyG`L7W&eBUIJm4Kmw zX98}_1;vW};qu=G?ROyN`XgzWd|ey*W)REd>=j9PT^kKmm*|W z=77LE2=#y4quE=zLOP^OZ$r9G8B4!=sYbPdpX7=d)S?w znv;O4`%v*W?I~7~ZxsAVxWaL;B#o`VwO@Qlq)S&pO}9Vbe@pS)1gfXjcg_q^n}Uf@ zU*KnET!5wQhu{Q04-D?+4uHgb$pX1Qs?IU76 zUGUiW-H7iH6rO(Yk(C$sR=MeexwJ-8{QhrA%jnTx3J&)EN&97?2a`DqN)rFR(-@}WrNqTjbez|2#a;CC91;>zOF;a!IdC!I*Nz8S!lm;YQIt+3$E zClT#jS#@`SC!Dxwb6fsh@+cBj!h|V8F2RPg1)7L=_J#;Br!1hf^iEmN&&N$uHlGh( z`k-2Ncey@$QwQ7#ns!%3YnT>hPu zok33jrP8E;ej!M_GToh`4P!v2$yfG}_(*o=j3=AXtM&2Qrwy%;II1$PhFOT4n~s{$XU6f!c$8oH`4gY0_hfZhy`eUWjJ zR~pr;pWUF-x+UM{NH8@Ib20{(vxbW-HU6E}J5VaE@}9nk+4-QvBU|KUmuw!-$iU(@ zzG>43IEW2Bef{HT%~&$Y3DsD}3Saf94B*p{0SPZK?}N1oAa zwt6uE3{~LhI){QnDH!d5G3Hma0?emo-PKslU2a(D)g*37j+F6qx&sA5vs$k=l{S4 z&6;yLTmRemojE3J_AqoKiessO80qL3r40wy{01S-QXoC!od3!mKpP#-KjJN51DXqZ)ewVF0;ZRfmp4;s$%>++JS;gd|gb;_$X(H zart_^0*(mMUZMHC_j`F-Zjq;W>nQo6Y>epks6iA*)~4$m6SBxhoMtEMVxF1lD-+N1 zaYyWGs(}?`o?(tG*Z^ymd07F2$zwuRj%Uf2;HxyX zBW(RALzI1`{-pwh1|>q^axKBFxRo=Y(JJ;=hK`!Lz}IVx z9b-|`$5ftRWHUtg|0??uvZA+=-bq*A@CJYG7x{~aX=dp-E+e-Xgm zhKG>Bu+aCeTBY6b@mC3op%y)J%@U3dO#C>E?Bmvd08KUkY6~CMr^1zO*l0YWd^%mO zESSp9`bVkqMn~D+N6`1><)-}^U2teJP@Tbk$|uB1YxVih zVP}{U9kMzAh&BD@URDYeVOoQa48oT1Bng3uo@pL1@Y4`!lQ$(gV_C9gXTU&Oa6%s^ zR@W4qOlYMn??dIn_Vp$@DN%ouC8H_6{#gx69*@4t&OD*$V{ZV}eHTb#=i`C!5%TnM z!qOMqf-cvF-xEcmNzZ4II~K=Nv-$Y3Yx}`?G<219Z{nwhqUNbQ|LLoZTc9j(IgXd##sR7c*gO%Qb1ZWAfaTUEz84cmhiVCEiLLX+j!=7mw_J2f#o{n~|V4 zA9^wc<*Hdf92-ju{g~WUbg;K297XF)0h}6xhqq^S{FYD$(iC3NkzurC_%j+u1>s+tZn4Q`!MKaf_Rsyu$%iugtRWeboOy*uYaf@Ij1{tyYZ6(rYIypNf66|H{z7x0(JKGMi6)@cysvQj8z=s6b=wmL1HXQZj zXm*`w!T=Hd#&|iH*5=Ht^3Tzd6?-OuKKj%eWh3v5Ycv5n5 zB8N<7OOkj@+o9e=+pH+JVs?46M_(&?fx7DvW2jvF`kGMc!>Zh5PFrg{wOjfm6)k04 zT^~gYvbtnQtg|Mo<3sUYY>43#`b7A2!FMzaCaGl)UArfOA3N}Or+6%g4%0DHt~?l$+m6gXRR&9Pb!i)ZmW(w#*(g9i0PtV_H^w3UU1AG~?6xNd3Qv z3(jDg1aJz?_{c;k8PsI#UPuTLn}SIv?H7BNYum4^bA{0cZZ7>i_n2%#2Iv^IGO0#{rz^vKFT*ZXb} z4BteS*~j%Jy|G#|j5rE+%L+Dlr#O=L1EZ&8N_C;Bkuqvnpzcy8zB^+Ai|j4^(KXZ% zZZ2ojACdIsV@>(%bf$xqu@c}1;fPY16>_lx`^+~{q}q}UUr1BUW})Ccm5W6ZR+?$o zdTNm)t-PR4?v~Sa7{}TVDNDHb>?^rmxffBREuD0xy#Jn3R z)Zo(O8|TJO4dbx>@zE6#a|M9Ce~P5B2+am+v3OJ5AB)y9WNd7(+vr7kZ@2Y189wnd zq3JFl@*}@DZd^Lx3{JA0o@u9{Mn8bL=poQM;&^-P`p*8aZBXP{gqftT2S9V?nv-)X z^_16a>4gYZr*l+rKy6>JfXww%$p&z!>I+43`qqv>2V1#*M?<6~-Ld^QB?IYOsDpl2 zCDwl7vMrJf^s9BVp3s7sjEPf>cW~tZfE}qiq|D&|{8X*08o;Whf%F6BKeMa@YuDZ3 zHEHbv6Ns&=iaxNMR&(HXJQi7sU_VW{Dc_0_Gx{3%_jX&7cAr*z*r60Z)dP4{UgEAV^q!aO0tGsqKTfq6G0#5cw3dCEW#9nB!2#lpU2$fa?PuF zLzHOA9!cPhsXO2!$Ptsk#$Cr?U#%7Q=!0MZXz`aRnWIEP1$z3izfRUxn381lP$Bdd zPAUm2Z!*VJ=Ebz<2zAko z^coiyxP_AhCSJS3oy$Y3fF)`sO?+cfhMw3$<#MJf@VF7UKA6!NF}X1pk<<)mg5%i` z136e=>}whgiZus^s_)i&0bMeYN>+AuvcrjiA}XhHdP@%yQRA#0Q1gQGm5R4i|1?u? zJCWkHwAD(=S$XnjqsGDdYKhgp+xHRRN@LpN>zB_^G*y^GhrHN?q>O82IcgTzm4sk_ z?X)O_W_kvh3QTrDoLn#zk*~y5u=1wFa2LZrUA=~RztL-+M1$QaFsJ?sPx+z(g{-AV z2mkeCA_p!v9E0kB8%*yJP(_R9$-iQ~&VJB?SKD}cDQUU~H4WjL=*ioZu`q4RGfFNx zHr@FW;gzb|=U8Rn(&L6IV3CiqCX5r)>ZD*k?Z4De&Vlfw9GQ=j)?2S5!@ZH2Scga$ zHV&hyL?y*u{OI=Cy*5I113kouS3_1#TNYt0hoUJa&N~Fus5^zPQ|ASEMU93LuyX<5q{IC4=cd4uT{?&!oAEMVM(Gv|$qq{hf-9Jy8Edt?DbXBcxLz{{M;huwJ!kc&kpZj}5Q09j4x!t>Uj z%g!=-Z}ORIw%kv^yF~NgHdz2}I-S>P;xc#8j8|V?uT?iOLs>Ic@f3KV3W5q(JH;=d z%QfuL%RKg?F9a4G+fZ1<{`d*?n9$YEt=?bRO%FtH@^<56uA$WJwDH|FgbqKF^J0zw zd&q*auP=buPi6m2`#oNv)V*$fg?2y%V{p$}kCXpCqFxsR7saJ9-sDX699E-sfp+kT>*&P3-<+U2l{p;o>AHlj1F^*&|qhk^MWdM>W@h_XeN zwU@#tF;H zoOs2UwNKcTuk+GM9R@PL&aD_(-N(7O3{R`dQ&UWXem&{WyRI6z44KtbpE85@T&>yN z&N1%RBVcXc4u&@3Nxrm04(F}Gceyr1()y?as~H__u5TczO4FXe%tb_WG@mDuUAHOZ zQE3RaSm2)}R!jfdjIx8+dV_YMOe0&^Mvg7t=iq(~m!1ftqYA$p^(4MuX_hS}vbuZF!G=v2t94q>(;r*;J4OFDAM?lp<%()~?qZW8$QJ%`*Rq%`v24cLh zG)^kUN!DpY6Q$)@mdnsLUc82ZU)`~F8B^Syy%gj9)*RIQBh!Hk8kYe$FSG(9@F*w? zy={zU+@*ZAca50#gYdw>uKkiv*z0v&@7yw!lC|)Z;~Ak+z(EmsG`0S4hI*1&^W}zL z^|9i*q%C{S#X2a1$kuPuJZ8+Ay{d$}7iJ|TcPTC8jt5xqns)gwLelL0Wz#u0`;+(+qu%bI{%5!8%bPf>KFB8=!#OWQF z4L#2O;EpAYso`eSH;hvJCVLO1y9oA6ff$Qx0PTxP=W2` zshPI7g*MWaV1RP8SR)lY1zj4-3*B6K${f9()Jl`gc<@DsBXP0W`doW?NWlX5;z;LM zN8)1U%nekXkhED5f1Z!GD8sky0+Ffw%MtO43wt$zhx^lAp9IrKd2bDlN8i48LRD8z z>LfAA4Ww4(vV1j2o>MFGis(Osq6I!8_mNp!6!|hQR#_|@#U={%O z+tErh^WF}NFiPRsFu6E1k-qCRW!zQ8CaAIaBQ#r6a`Efp%(mg42@Jon3R~6FSlhT^ zkYUUbBPVjG+ipL9zDqXC`sl>KI#izgWWZ{_C<>+akv-Int(hhd4wxucu@05HJcNie z(eSWFqqOL znF{uRAb^374snRHjp)^p+lX$p6RDG*bq7NIKkr5Go;-}R#DMs_BXs$F8D*^%PBie; zD=TRy$W4Ln@`KW`>DZ@KD6Zk{6>%qsC21~2dpqs$ONP$=Q$Y7HPjXn#9I`J2R)qo5 zRj_Cq(NzKvW8~R^oK;Hr`6Bd&uob3-ZIu~g?`Ctz${+Yqy z>EXv*kzmES7ut7Fi>sik7`}Xr5au1wpY|oo9!4p@g;uuD0~4#oxKKKeoth|Gy1sAX zCmL{GNJ!;WZM_~n@A?@F=S^ZpaH#+tZo8%w1btHnn-*E{he(0!4lGi()p_fj*sr)0r6(t2G0ItP8h$kMp>2@r8Yqx= zIqSdB#1u?_Bb^LR|8u18K3ZKR8>l*bmrTt=jiD!O+F&Pd@};Y=+VG|e7FMI)H27*Y z0d{eHqonO;Qq%+Puwr{D@@>ljg?4%O&H;4!kU>)d@NK@P@ZtPE@X$x=)=XE?D8?4H zjQp6ZU^=h0pESXc;SjcpRv+tf_v`2Rg2vq(&r33=H}a8gmXAYt`g&q;oY*?RDyVZ| zo$0`LVEXF}@@-fZb{lwG%?XMxJL{n1O9o`bpAin0Po;PD5yuR!Z~pO3u>tQ6>be zPHdTeGCoM$Ah%bMbqDV=HT(RG**b|xH@UlRBgy8ExB4>hhVhq#=)a$!LnjXU4k!7- z_KhMC6D`E%qsFNntlZ44|~PQ5k{g{dD|;rv>8^tsIM#wBNN|2xw$=OvH)4(41&_m z&QJyJ1a*fM;ofxUXIlx*cUcndpEN${!xQl(4+J*rUsmK$W2Btq=}*D>;Z5*u^YnCM zQ*zR3DUtJeq|E<2ALvrc8_`v&@MO6Z6Dg&ivd@~Ko5zqL`?uG8W@v@8_o$E#ZQsSj z6IFI-yX^iFQ87pI9;vi;6SV#IL3(N@8Wb)vS1a$Ka#^kt+dB*iPd39R#)VZYuX2se)pm=Ot<&&Ou0dWOvbFB_mr2zomfZ=uMWJGMtQxD3u`MQ&?5{iBSJ9l7u zd?ardo2Q6};=PXiVraG^v-A8t*opTh=M8;+h+%>Ep#KAaU=Bh&6!3!jFQq0%GX1H_ z|0+FjuznpGwJ2>V{bLeM2yB7Tmv%n<9KwoBAr1@(YsQ41IK*ZArf4-6q941E9CB7L zWd0BM4^Da}VRL*h6&l7R?=TqcwGV2s$P|WoTZvgj+#ABk@yC}o87*o46_f+wFxlw# zGS+cZyhxV&Z9&AUBgbi<*T`G;v1*H{sMc#Z(^l9rfvTj=C3?McDpSg$Q&5(FAzXPp zqr-+vu$zY~m?OJu8#rJZX-hK!;jC~aF?UFx%Tl@(!ugFdwZqf_y{6BqrF0LOE#j}wx3 zImmRiU>yyJK*$QNY$^vNfVu>LIl$T4S1_R*r$u$DRc_u$>m{e`-JORUNP6zm3Mr%= z?TLkAadYcm%X-xQKW^0PvK%-e%v}QwiIgjs!n@3Ab5N$y_&*;Nf~7wG zZ}BP7|3eHg3q-~6Qt(M#^gdm2RVUC1Cp^~dpcRRiy zN=brXhSxuD8nC2l6GQH9F&%8Ic|Q-$a=nYBlOn+O8l%yPv5lE9ikC0NmjIaSXT2m$vMI&ZO|L@Q_awZCM+8@|!fiyV%}F zPpicJ@%e7d^dB!M=C6>81!ai0z7=X9Q+bivD(|t#fW@+>m0CwdT?J=&ZYvB~5>_Vf zjjNy!$oaU#s4%r=csV4R#=1LAuqAMk+HK=2j~_Bapy-8CHeOo(r_RRYy7GG}htP1F z9n}qwm^W7nz;g7Iv5ayMW!9N|EwXzqC3pnq#aYu1YbYO*Gen%{x%2;m&Bl+~9+CX} zsLcX2{1s)VGzzbO4K<$f!hWPj2dwIyE31jp)g6+vimYvrD6PT}(64OKT^ledM4I4H z$%F88x^&7^)J|bIWj(Mygir+2uXAki2&)17V?v*+6rECNGU>kj+mP!_n;5b&xB$*M zuNE>Q2Pm|u_htOjY?BuKuZT;OrFvWiMmeh}PK@%pH=HO)MaIdY-tSO%Cr{!T%d$}H zps6sRt<=HU8k!;u z5)c*P7zJF9#xKS~wOHi4{sKXq~>$AXM78(k=B7>6qMVI)57dzbS{V|(RRR> zgt}q_3&$4x%NBI>=|~G!`~5(>=lwn&8trdUatj$&b3iehuIB!1WXn`{t7XZnX&3v< zpHc(hQKT$IX_sFG*fr&;kcZp#)4|^>^W;2{IT`u_2%e5fjFdsuS&5%@3E55V|IC^S zC1zfKfxVQz<-&^eOBNHeKu|C%qP@u;km$^G+@Py2>(+3Zah1)Z`E1{NGZqUap7cee ziw4=pcE13gS@@^dcchBnODIHfrvW|C?_o^1;fS;DP(Q7z zv_Uq4I|B2_D!vAw2>ec#(UMhSpesAtk8XJ6WrZ=FiLs-;#hVHpiHr!9E)5A{dO5i> z@|11bmQt*YTW)uO5in{zKo?8@9r31j&=9~B%0z|k9+ zKISJKjBcD9yClu?bDlAh)N=!_pTrw~-9uk=e+!A#u-xRq$TXP~xwu(90%h)d8fJ#Mut(h@W7mDFwVnfLwuO6N<64Uy~zAe9ZT!L2J{;wlK& zkUD(~&C_Lwn)vf?DGo4aPr4|*9GfOI;SJiO`l>Bezu!!pw9d=q0G>fmfjh8s~`%64E7%Kh9@-H)AOhe#-QOGQ$=r`fDtx+v(YhP!HQl8(&M{qra*v0zS9hs z-FMB$+>GT~bxkj;vw6TMo?*{vi#k zuxua4wJw!K7teteFq%S&;Fb0-bmqcqZaiD(msgvi{Gl|y#*8<}Ta}%cWRkw+XF`Av zM7OSv_2H{W+Xk6lH{zAAYA~TCwO-~7)!L1%+3r7Sp1=dlkvUa<0|&j2nOh>o2Ra(T z!&N!50biJ(_zGydeVxG6M3m-tQ{98B>DH9k_*-_r>LwRq^oo3c&pcC6R17B0iK%gpGB9Q3wPQ&=&dk;>0^T5z3N zI3t{pkPep&Lg1D&$A8A@$1jvGN>yFwxFGaWOn#QNR`bzkD8lMHn#t#a^3GvNwR zg)hGe{(f_~Iuwck3uhT3`F$HX>1EN>v>UR3Fy$v~dihkm9c?^rbKQ9wK*Wp5c{4XF=LO*MXo?MI)DsH_bJLe-8>FUCMqe* zHqx3j(GeMW3oDCNb>>ui*^4CYz0m;GhM7;dEQsm?%aZwVQ<*;|%puAEWpyR(4Vg!K zfIdT^)Jg~jTgU;ZwneOfme@DMASMFje`w`! z48P(at6^Dc{yC2-ukf{7h1Y&q9(B?+!T*K(N{VLm-)rDDpPWcRAZ zD5?j`-`Njm0Z{xS;-hG7Q}$F|{bxpE(IsaiM&HH}5e*C*tXXbsk% zsE6d*!lOZ<&^b0-<9HN9fjM#xXf%bKC&uo$O~C&i5}ZN(%I2f;ZqcaiPmZLpQTn0MZ{7C;HR|m=<-Dy93rp?jpWi$tn{9Ff*qg zk0V*E$48*VkPtQjgR{W&?5VGK-7WBmNekz%Bv2eE?d$enku$By?%MIiN_kN}4kuQ*}$ZR#@iYgm8OcgToEMMTwZ7vZwMDEIww% zk-mJgWK%GoXPV+UXQR#A|M`=|6MnurlY|d-YcNa|rGHSH(61d`?z^5D|8kqD`+bZr z$Rl{~FA&6fD}ST9Z#t0c)ZeABkE=ta6vUaHg)O`cDc?p`jKZD{b zwCMHW1~R6V=?AoIl-X9TcfyGml5p4L0XXE1gf$s|M{`{EAUU3Z_G759eW=2aWo-9f zxfkY>fPBof_lAZQbr56rea3D|B>wUq`NbG)<{<=fqpme-S5}6%exzXSt2v0IPR$!A zM&}oJ7NU!%TKS_L%T9f8%u*G=<|kGmPWQ{?Atf&nmW=bpVtpL9y8E4|Qr%TSF7`+BBxaz~igIs9la*esf| zZ{!5`0fw$27O#1qEq5EBt#`VwwnpGZ^R!anKxCWGEy1`Ml<|(x&ubm7v{T_ z53^&umtp;=9R(A|Z^*yyvrxtP9M_jIhQaPDM;>>*Wv0=H2$sesyr-v;%ZL*Ot& zsHNe#)*mQ6uu4dTXZ7XhQw|S?eU}X`L!jhHO%-+-qTd3NqyNq@=hIt@*rWBkZ?V^1 z7`(%ZhWES@xuy~DF3YlWk7d-^hNXoT*}}=3^U_N!)vAI&jz2xsDTetsW-vt69;+}v?rR| z+ite!WpVs0NOf&J6GoxTR`vv0daJ%^v7zv_jj~FaT;~Gih3JmTvUc3g2=3hghKZ@JkvwVhVLmk$KV*O1>&ufuB zgs9-AP0EJ^xgzPH)+kp>y?{z`N$z#IJ_Rv5dCt!L(1UUd*sijzg98dfG7s=YIQR_Y z6N7tr)K<4{JWT13p!_1n%WRduQTX4IVls~K`Q3rDvQ>6RQ!dfR+P)!md&?UQ@JS%8 z+Kei10S-NKmu1Vo_`z+J(kY4SuYkgy=*0i<`5z-U(RIOl zU)`jN4TA4=kW72$R-kbzg?oGqpkm#~!fnFMP=sU33=}E2W2D*tG}V&h5>zl{sP0u4 z2tJ{Q=>TBcCkNHI%$6ywo-g!zD{MPC5W>tIP|Bhoo44>hIjm-L;F8L~sqVv8HMMCp zW%+cEX`vForasSK3u~yEl$4=B;tmP!o$MS|``N8WeHwa=34AxBdI=c+ZVJ%)jS|m$ zCP!aiKr$EV*?Q?CPyP&BOVwXU&CV;{PVdMXh-3W9VeIVjCJ+id!qM3eqEJV0GCu>H-582TAd7TLX^dW|#+||nZ zvu2%@?NmGtgJeXQH;=J@qim$F84t$X?u$i?f99NobvbAby@RapG^u-Z71CI1kBiS@ zuE(>T=&N3fa{hnsx6k8{n{IUABAdLCuH?ozoK-t*W<(HG8CNJ+yPqoiM;I7}nj1%T zPCBt|VbbN}Fy-Eh44|;xiZ(?&#?8`dRE7#KQ()-{n>c*QQ^h;@ku0uaBAv^=r3`*! z4m_7!_{}BcN1_Djpi@KfrsVE;Zp%Ach>J??!g3j&FL?an66JHPMTI;2)JAA;c0P8} zkf%Q)H}O7dh$$DBT=++)kkRJvacWCih6Jg6+L}H02W(DiRrTA*dW2(;t}Q3l500$! zrBE0TS~!)VZn*0ktAMsY0-fXs&H5uZ6kj7WSQW&d;@mZ&g>3D_vw)&#`1xl+L*$gc zs5WokA(s+GT;>6!*_}60fvm+!WzWAU5t0*L7;y<8zwv%-xp>qYk1*-;Q!qE!VO@y< z?agf3FmE-~92V9MuS}!}1gj)4DJWNN(^O`sQEo|8mZ~t&)J?e^y4z9!re6ax)!|L0 zl0A>e%vXY)FgOI3Ex`&4OpjEFM1$0Z=Hpak?4dBk$?4TRF%QsO*`@4J&o*ykwr#MZ zC$LEsblk@P#O1-HyWEkWjRff7{@DMn4zcAr@XIHdK791VrK|i^atTrA{gBih%1rIY z2$;>}P?9acbR7%LZ~`c78m<{sH-CoxuFG=7*oA>j)4E4W$n%{?hRrA(&b5Li9|4X> z*_AwTAy$`TZ*=Ls*!YQbzdtGZxpm{3Cc52U%(`Etrpj7Wq_w;+?McO?g`H~LnOq46v1j&ID(~@al9zX~yetwDn zD`%7yW-p@vMNSq~voPTBHkVSELK4ZBw1z>VopU~vg)O&>)5 z{43*YSI{$DO#`|bSzlQ_Y!C?5vOk+N7Xx(p`#-Hgv8jHyNuZaJ&0Rzlx3j_(m<6DG z)1GQ6*ZYR1dj0GQC2radJwg7S@lTkFK%0m*9r=H*tz%98GCKGK9bvZGx!=ElX{O$x zV`OYsbh)g>ibquG%m~V|FJ#|U;zMjwJr`6cFB@bBvI?jp&N(oHMIk~ zyTHtOo>r(!Y3q<{^xRLdY)dP001EX&NqMbU6aP$+dBr$-(5uI!^zAH9WCmVqt=mX5 zL`gmMBntz$SDyO4#S%UN%QGs~1yo~n;s8$%vN6Ubpj4-H;t~?LQvl2Nky#8F$?xNp zZa`nb=?^Gv?1a;fQyr`g)F?i7cC`Q|%!p9uj|wFEiT=22G(RkQ%t|qqZ>gfyA^oCP zuZ^w`3c3ID*I1|7Ld0Cuf)QR$0o(WakSMA@C}BJRQc%H^7T>$8$yTyl`@m;`9X2x^ zVOikQZ@o~WcpSf+MyvU8=<&HJ0S|hvmcpFFlD)zlw}{rQr|aG|bmIo!tnEtgghgBG zr%kqVL7zgA5wIBV531mq=tm@eT}V_RpYhgGBvk3+_vh4;?Wx%3T(d2aKllM;Zvu7vHf%Grh4Z0DXB#=NaqVv3cG8BEU?_qtgXBBm>4$fCiF& zp-Fextv$h|xuKA%kn(|WnrvB6EKNk6nu+v1a=NGLCcitxEM=Kol#SGjb?yreqOBT;I(5if&~%0&;v_;twOXnsk^5e`e?L*li>=#hS*I-2w*gq+OfXfEAb0}Z;E#{ zprD!B92LC&H%C)AF-UbYBHgjY4^oYE#qXW)33a=M-J$U+)f|j{lwfAq7E#vE-)c6jaaD4`BY!0Re_Qp_Yy7sYCT9 z8&=sBku~+fERgp|BJe2exHWvrp!|PUwL)U5_y%JU4u&sl*&m^o<$}HukL9BqXFN|Y ziV}rhDwjiX9x9YRN%jUo@qBRQ_z)~bX+1!$&bsvb+e<^^rqiNYa@9lUvYQCl=h?oX zlRJ5Y5I!Cv+kL!OdG8JYBP{AHv7G62nJJmdU~-TVxmdJ%83d9{Y}8!V3CTucyE)bg zX|IXW#pXsVv8P<$$MqA||1shnlDwT;sjLhC-Z7f$4T+EQX8!LMdDuscpcrB((Fnw- zNb}xO0jZH>IQ~Iy$OgUyV%E)MK->ZqrsAu7rrD3T1@J}LEW{}su5(>ChReMlHmqOv zZ`9-PhSz-9VKWwM$VDHvM^5WMQ;`bA!_>);-66EzB!+_Qy`&O0x+W&>DsJZXm~*t; zDF;UpY46~=TF$JU0Jrm2H+jE|Rq^U(p+M5ObNgCca|rfy`nc}IY{0@yYR#&XkGd#D z;y_Eo?sL$kat2Wnsb|@Vf{$sG)PDvl#;0eEoh}3g$kLkq}SiNTIm3I3X zo|E(rpp_137;Kw+Y}9%sv~jz*v~?LrXIb4voWtV>l3n#Yp!( zNb|>=6_HY00ng(tU~$E(TrBG^^6NP6^-8f?(k=kJWaWhMx}6qAG}+ju5PI#wDGlKy zz;`w5{mRJi#|rU8uIU^0Gh<_E{xHZ|h=EyiX{Fpw7t<3Y+=fX;H{?x2zFurH(-?nz z<1w?`1Y+W>W9l)>D2u$-pkA`=RkO;FV*xNn=cUZ%X4ifTq&4*mr4ngZOQ@RlJ%;O2 z-qP3?9ge^7jhEr%r|42qdTPP4sUNKR!@eh9AWoA-^woS@KYgq&qCEg_2Yg3P=KUK4 zB`*k1ne2_p+o8IVWA@I44osDna|dyDKvGeYSfy05^QcYkp3I63h{DDzJd66>jkg5Y zZ~%FM2&6PsDro2)5(@ND!@V^G?Ss9+U=HRgz+i=IVs3JolfekkX|MC=0vBv6W0Tr@ zjeswAN4idu5i%q6knABI_w2;QSGEZpPaUNs6B(@{a12{@N1Gc>eVp0p|6FpMg#2$z z(l*K~ITR`$e{A3!6#Mm=R6f;z3b`U+ZqVYR?W%zn+JyhBFWfYDrW}7Rq@96n`juzS ztN7DO(s;&D{OC|A7Zj9Fnm4B}AJ}=S)7_g8DgQDNz|V0XZ~7)lBO$`m_->Mo#&*a3 zx@23PX;VjX#72*0B_e2|dy!%)cVoy`Ko4UC;eMBsXGKOPz53L?&?0qch}0CBxFuRJ zU=&f1AxLGJG?C$=?7uO-_rPBxAN!P8`%zrnAUeMqia{&yEXzRQY;389TFnc)H6<_p zBj~OQ?{cx}x4aIany?OtS8PD9(jPMsgAQP&s46&sf!@2KNCSNWmTjBUeOj?#qg!br zny_*dzl@pF^|rpjY{|E!r~9BrIExx*p&{Kcp~AGditvLE}#(_O;}9V-E97MG38aSTeYm*mLu64(B3FIFWeE;*1eZq(GiB2z z>rowm3DYH2OVxv%C*7eogJ*x#1g)d2$t0m(oCXu9Hq|A%kax7Ft{m?W5Yy7166UGVS zwJYu5j~}Vd^{J|>r#639DVKbAS^Y(p)bX)aqMSE zSD)fa6V{6DnfCXvz5Ou_b7(_Wk9to-ilf_>UAI%+4b`Sh7+*lwkwLUxYN~yRZY(2P zMH*`4|MM;XaG`KC%8Vf9RobqHS`5g7x{R64Qlh7AG1%P&6F`L3Y1{J3}%|iu7&aD9&o6H%(%TF}~ z1BQJL+27=qLytGN)3rX@lPlywavCkmGoX^_=L4;J-Bv$raWd+a!W{2mLKh%bm~mZ# zja9jLimE@SIRB?<*YD<9kOMXG&H)-WZb+_*6WFb|mw=TTQ=zotGRW3BXu!7{x?KDZ zLA96m>xgLjTrFixsG>ys%}2h=i_pHEQBZT5+o&M$#zTcX9yQbI5WQ2%KW8d!Mi?>^g}ETPNucBUo}H4>QvT;wp5TH&fd?0Ikw% zwe0Nt5D_D@BGquuRv=1D6%G^^T_5arFxm&$Mx&M_aW1A49H+{*`Z*p073ID#B~r}j zsw{v*8zX}7?yGx7mvVSJNWgLjC!kcho!zHcWJ0;jr>MbL>;tdH@@GdgNUhV#8%W&j zdZkVb<&d!(MPm6KeGTs7d^^xY*F#ZjNOrd0l=!;Bh!e#gKb9IMa+MyT2bH8%&rtD4 z?J7V9H%LClmcs@&Uhd;R(IA2Q1g^6qvK>Wa(op$XTp7z$TT zwt0>Sy1+TX9L+I(TSy&1zw?1%A1h{}VoHd%N9=WNZ%!Xz69G&#q|2DK)L0=yS(mlK zAHQv;QVvKmyik$*#y+_v-cIHBG1RWKjhRSI*jZ(`nZsljG{W4qTBD^)BTZ~nP7}%% z($(|N8d0f6K~B_yhThhz1fy(x*>%jt^v0QE;ExdOEw~?@;)+CES=)|RB0fHfbHFE9CF?vK!HPQ0m?&=}O9$z32M z4#OKGt4BE|eb4l%{cABWdqQG6=8v1ff7Y!EvdcF~p2F;HRo#dpG@nLg$jH%88>^RN zFIzDyd%8Hn=g`)CHf#(;GaC}G4Y+u$khy~zkthhVUmgQGvF5R3{|vTSAdk;Q;Ilba zQ=CQyjqiMJETgZws=VOZz2syO>X^sdb$;-wwwo@q-z27Lf)qXu_SGx>#^(-n8Mw8w zB^)M*wl`wcRS(pcQlM^XkK>og*MrS%A7-39sAG&hK()uD%C0RB{|!);@+rl56$=KH zjWC=n5Cw~~W{z$7+y#yM`-47iUmyYGlr<&^U-kyaI%FF>M<%Egi&;F5`1GQBFHQ*J zY!z5C$Pi0_-aNDn1+2?a*=Pu!C9CUW)6JE+o+)S>pl6^OpA8FB4fc*aru1_D$x}Y- zX_W`Eqv$R*d{k?P@6I%0G*D2gkDhzqmi?_ClV1DQ*>vlGxFtICMefS2&KLLF6V1p7 zvnoFm%Fi#&h|L$W3Jm_skS!SWme+3Kw(jqo3p_}e`Oq_2STrkk-IoUpv6;I#nzHwO z b0^!5=)phgpN1+Ss7SD_-BO*G!Znv7x%@TJT#UfUSwZacgF<=~+%{Q@cpU||tF z#OC=}_hV8-yO$y|5N7S`f&j~Wa2VlO({GkHpR!UIMY%X0Do*h^vN)VRMS-zqVUfsj z#&?t#Cnu!M%J1OCAW693l{J(4a+iMQn!VaFk3h9 zy8F11IBg<-fteR7oUq*Wql@;X%Bfl=$)r<58Zf{FZ7ccen*Sow$Z14}j6(y4E8VaO z3KNDw4X(~mY3tdhZG1YvE0_UXP41@A2-|_y9|18NUtt9v2qR+LWzHNzfm8LGM7-SF zP)3{#j5zxXq(06T49Dlg`zVC2*nrA79p^SSov-AU{o*XAh=b!Y<}nQH@>gj51j9H| z_W6RET&vln2&dO^6kx*)_i&M8&LbTYKx-|HoI==&%BqZ-xIxk*R|7@x0y`qbLdSB- z$tp9nv4D#dQe_t=7mZ(?V%V?`j(J3q@6F_!5Ssasg;@CIiH??t(JMbW)`8-hPx2hi znHSf+IeMtT*-0FZY5??^Jy|lTb4l-K`EP+4N!$K2O6CYqpt-#@v^@Yu4DS{#${ zl|W^O@$LLrbWRwPsLb%j=x1GJfcW#h7Hswo-YgJyh6NjZF? z5?^p2Xwj<8L+H#Ba{k*MU1A~E?k<@SZmD%CstKQ-`@=3mxx|{PA*ZP&*&3Xuq$HPX zDK3L*w55O2Ote?o`(<3PY-6n21{EdIPAv1`zIfJ(SX??Sd=?swvr;m{F`G^cNZ~kP zRH8@|-P*v4AwB>hPG1J*QemWdQr~JqdZ{u>0Dj+KPLKi{R6d%$6@TWz?;fIe*X=2b z=L&v}G_z|Y;Uj9g)qbA3fF#v|_=Ci1*&WCsd+_8Z@&wmSUOiV?Vu`!3dSG~2(*E@$ zVYJDGh$XkVPRgp+wo2C_SVuwy@mS)ZeGrq79O)6JOVSM$$;NDia4pt{Z8d;s6ZOEq z25uU{7vgj0TFZIZA}FKcdsFAD&ou!^n7Pg>iRGf*!rpeK%A*^9aJo}bd=Xq5PVgV7 zy#=@Y1+lWDs}C$}vlJ~kIiY6&$+izVCyh7yXIYbFoZ#683!Z-QbYwV?eJOwzD=AFD zOlkiDx^kS+`~`zPr|&J)@KdkQy*RR7fHfQ{BLC`J<-2Ir&9K;XI=KJhkQJC8#xH%b zQ}alsMqnm|`R}(2l^UXc&vAF{7ZnJ{r|?wPu^A&CmXH3ZX|$o4Oige?=UWQ#afipw z4ngi+ByPJ_r0+f&TDht_Sa&29?x7GG&8@`@pc%9Fr zcj^$2ct|jdZw2=ET6sl68rC2(5^QT01(J;Z@4^`8Yhw`Bef{LRg~BxAZ>{kr`i-YW zX+Sm^^?DZ0yyt=?C30eY+S$LYbH{t{$NOu}tYi70c9_xp0SO7c5766;{z>BV{be&% z8fPFoFRSe2gXm=S{ruE{#Azb@Us>99xJyt_7AYnE7?8mQ2{%o)IO;w0bb09`hY97Ds#FgJU^{9-%n1?A#D--h+$)cBOd#^BxRe2G- z*yw>`7@zQ$oiC+hbhb@J?yY#^9GkRaY?*(f5h-z25#+YNA1Cp~9BynW=Q zqie2juR>z4xpy_o^DX?&V5*$Xz!1U>$uPSxnVo|0qizu!aZCO^UBPs(AeEGuEQ3;*NmZkZxumVmIEs(^Js@aDj&J&DkFT9jz@j zSz0@^oNRNQp51XHr6( zPP7zmF?uDjp0;YgspAvlF@8!lIYo>Ooa+cTJ}~SBw=08v!e!Q|W&=yQ#OJBF!&qSK z$j-O%voI!819fEaBbnCo9>Ip~B6j>6-8lRUoz_L1tY%_hjG60ixpb;3%SXjPOwG;q zf|??X!RI2Eh#riJ1p2Tki68@0!PGj~7kTg<*4_h)x!`Zf`5kJK^}9{@HC-;a9n!(F zX5Xx+$gpC?`|3k8>evqpg+Z;P{I}*#p(Ju=`zHKaEo2_Z*H|q3j+`IgL89Uz&ULw< zc)~nh5F^j){nTZzdb>}gHzPE|&t-w_?o6DKPdUX<0H!op?!j(5g1+CV-Z?J4$XW?b z)jUS2|KS;V37zS6z^Q@@hOm+4DWzQW!sqAQ@S2xHvQQu9jT)k_lidplwSGehq`-Q${#EAu_gqDJ zzRinWFk>dx$5u=)xh`Suk9j`j>unq$QE1_6U2QhuXQ*!DdLY1flP{FU1A!l~e3Q~F z>DZAf6v9fW1g*~nRVNP+{f;X8pDo~+KQRQ znJpa;Mgr%?Km+%yZ!resuV1UQ=h%!G&f-g*l}PVSggTkw3OaMK96YV%MBLmD{W;m8 z0kjCx&^BCclDZ2YIvoURQv2BE^g&+Y-eGpoo9cnrB!_qPJLXe*XNC(hVRFmIPD*%o z&}q%-je^0rqzf&%i!8vKD7c>uc`Xdbbi)4Vb6+nEb?&cmELJfJECvzAyRxCPF)KpQ zJ{8=C#&mlJ()P|?D7u7aa!b;kJiqvcK~3*9Y#zp?yU{(h{aR)3NMM^jeI40G#AeLt zgOsOkbCjZTs-!hEl;g#>-P=?_)-_ug>}bF&4u%jjWG6nMDT>Pv1SKDw!bN|p$MJvo z8`qs_KKtrfq>sOvgE2a(0;)A!kvVD|?_QGzw*hlG{JtN+Q>ls&c!T`vVF)ZRt*~ex zPhpzMF0Y5Cq(Ut$?|K8DfYyI-69(NR?N}{=OTW%$|DJ5|L}J7vK)C>v_0`;HNxe-% z)Yh|h8-$2OoOwIsXe>g(oWV^fZazsO*}O`v^-m* z{{3O|dcYbwyoSs7xh{4sAfzl-9EjaQ=y0&Na;ni-pd8rr|UTr;LZy> zDR>5Qg<(l}Q#ib;OL$Y-sQ7tHbD6at>w~8Lz0z!m3Yb`bVCe4e(vSi`!20~rjQW76 z&OmB;6LjYyqU-?Sy}?&!WGtJeg(E9tZmoG*{PAKg%Rua$(xF?G+Eg!kC@dc^^>)M5 zV$_Iz2KzfvLxLW@v6_G$>IsF5egt3kc-z>>Xj_R*ExMXkFbYU|RABd;%53TPNeyh4 z>qzPpguBf-<~TI@dtZOp@C&(QJ$8RI{Rh!q}R8iw?@xYt0&rkWcxWyB@;QFWEF znq(D9b%*8lIh>M4Ek3~4>hw;dx#v+it*bg(y=E{9EdE2;9c>=eoe*ddiYK4KDlXYq zSv&rBNC8mFLEHo7R69i}>S;mj|E5P%EgN2s_56bnTVn>kNVT7iPtN>&1EYH6tzl@| zk@lBca2Uzq-SXHSbm_9CtT8|NJ&WRSMpn#*m6rYiG|5O`xPknJ!yIwgQe;q_UZXsj zu4L|JXSK%FYT9r~eS@xfwN0%IVBzani9B2TcqVm)f-up$HmiaLS{9_-%MlbJaZe4s zg|xC5SS&}{0kROk8VBSPvUjVk*C>+4+DaV|{m5%GcB>ERCf|DEJMpkZnNN!WXJJGLQ z1~^|y=b*~_fIGP54)$WAc2K)#Pjq>pM*6P;fdd*f?# z_)cHnchFmirVZmn2cB^wgPrAIw(M>@UKbp4I*oP01s^5uUKwSKhWVS!dv!IPZzM0; z^zaD|fO=PRuTzEs2{>s571B|qoK^-T^buPhzxK3tt>P9s_QISKDqq^{MaTYHV}DRn zIrQCXwbj+Lp)!2YdXvVRi#J6XdbfPV*;m#-o)r7>KZCuky76Owh^9wRij=5R4$a4> z3cl&nX-88dQ_R5)!45VRb2TWj|sUcPVuSLvKkvXO6Pwtz-Db85!L5mTcp;&4RF|2g|(nX@HYRnnyD z83qiUOCB*VIS{3eCbBs=)_Da%$)#Rt>12dxMY!&KFSkpxyu%aFoj8Z@ zOWC`?ulAb^cGuhu*TaNf495*5YNjL~m6@05|3R~KDTS_q=3i-nZ)j5oNV*yU=iZPZ zcYpd5CV6HVehO%+l{)3bN|)nXsY2XTiVz8Q@{-wi2TnHy6tQ-zu@J%Si;XSeK5{!} zf*cF=j;TKD+lIZNFPO??Y-6K5FW>2`vb=Wy#|jxFaCd(^FkShQK(avk12le)VRwBr z6EU}^?(I?cV<~5{7|CjG&ko(gKrEkJ*8H@!SJmt1VW+HGXX8NP9@SKkjVe{cdTSo^ z#VWce30Yl2bgzQ>lKwfJFVl6nFT*5O@jrqg6wo~_a+ zT+9tgW{8xQ2Ez@o?scGNd<>ZGjR)-^3pb+pDUceq7MU$={i+mJEnz*d$&bT`QHLbs zbZNSY31JKxa05Y{{MkFct0GFR*rMvUa$hXP-MS8noE3{2kaj>NV;7y3Od>4E!)f{b zhzhKK5Er&~^S0efQqq0|jpo_M>bfY%XHa;?0q;iTnZbQ3#aPbMKw-s<_FJZ--%O3C zwwik4y)H79s$ql!0AN_W7j~gjN9PHAFi3=cOEPhZ)UPQ!Mc-rX#* zEQ5=cpFFSVLh6|*aWTB&&x)WJM~SXxIOjiwOs~L#wwhEWPQtNcKhp~PNENI!(zM|2Z5SV}vOtOxpr z?K$2i=JlEzLl=hGFNx+J^&@#Ww%p8=$^l5UNEOjE#Bfm7E>k6suiGY}#(x{G5{sJ$ zR5N6+*m!g1!XV$@(#Aw}K)Q1x%k~B7hXDKfq=Fw}K6Ux*mu*;)p7i4>Mtkuo)3XTm zhK@_U+(f!3NEVcQbUV;^v@r~PJz`~o!CNGDTot?1*{~25)hK(pg{r{2+{g6ovyngf zhsMdgm0Iv~EWg~JFNgKor!#ku80IBY_W>i_UQ#b=!s1Vv2fn(%L|_CFY~p3<7sc0w z<5rfA)Wgu1_6Qh5KWU3G{Mb!Hw&_{2ZdkLGeQ_BPTIhwvKpEkcWBMMP&w~@0G3-Yn zYHCf}<9lT%szQsfk82b53~qn|Ue?twR3rsclYvFP&23Y)uONa*3PF4QwBswcuwz)2 zCiCP8BjiZ*e3Z0p1=4hYi`ItK>BoIH{3FtXl?CTO9f2x9Z+-fUcQ@u0N5^fp1PPc= zQZPcvMJbp%b4aoJd?xLIPba2=91&s}vIhPmBy@l$iw8z}syviWh~0LiX-;nWY6BMJ z{j-|}BFgseP|sO`Qq987F(nY|)KWxMSI1lyA?Jr+!O}>e?A}rvAY*ZZ3;uPtoCczN za@3eI!NX9>d`Dk5)FURI(_Q!*FzVL$)&@C0o zfdu@^X|zbRV5E*(wP62VK-ZYDpAdvAKl+~Nh#dCa1q>mh5dg;?QYVz)6VGB)_}May zk0&mV0IrmcgH(}Ht!}F_0b9)d;nR67Dda6HA-yB9QrSX~W&FA+d^%|KIh5W62F%a^ zNT^au1b;bBv9v<8DkANfVpI4vN^93Cj2^$J534}8dUCzHil@YE7IR6pMFSmWp7kZx z-@ACzgtH0QzZUf(XVFEAs;uc0g@4EI=EG1jguh)WaQTCD)EhJ!Iz26MPZcl1fbMPR z=#V_b*VvzUT=W=4`9CF49~szg3FN<;3LOG}z`tl`#-Rz9v%&ovz~k8VJy z!D9&isMwyA_<|f%crse1!P}C6+Z>ug$Edeyx)qh%lE%0h1!xTM;C}y)ui%|9x9z|k zvEOp83~?pwR>mu-vTwV4-M>Sf%n&!<85Oq&K^YX1Yw`AQSN^pnkp+PE@oEhzuUiaD zz!%aeV3lk<$0!!ajIJ&XdaobAEfa6ER(nP(8Jp1kYbxT!5}^HAqQ|zRgwZ^_L81oa z#5P9i5NU!At)Rp8vw#oirpT~mesq!$V+5pw-8kiZLxP)AyoWdfDr$&v(yn<$8po#8 zr{DV}rVmlYD2j3c5nAlsenPb|3_hTzC_EB6bb}su=2^D(=q5bpP2?(`Ax~C-Z5te6 zD~jL(I|97ufYN>h)nHOr(;aRKzyD+`y$c-uA_WJF!9@*u9ztjEATBz1qe=RlKY5;= z@8a&UP|8kj@l2h_ZXM`#x>D%!rp`?&X~B)4L^Z6`{Nrq!ajXW&dGxFbf+ zDHZ^1YXaZb^(lt8W|7QT7{k0GOB=Oke9#7$l=Uiv$ zona!8N+)`}K;M#iuH~Z)%`ZrTBU~5nu)XbZdJQ4+ zQ6xjOY!>G#Ab5`-gu0q}76m(z0}rI2PtXji56b9(YQQ>~Ijxn-jPLL)ivHj9O6oS! z(G-e{|EFe|Q(fI0Aqf4k^)k$M5LO3F1za+qNzI)>?$Jc<)vn60i=DouQ^eOQgKU(` z;$rqa7O1Vvn%O~eJKdn?s}Miha`&hL*%GwmI^3xQxH3YC$9Y>$vIgp3R!l z)}DYBfswhF*}tWNcjj!}@~1TS@Zi_Bkxh=+7k}4zO`=6aarSk$)Osl%gsapYmD+rD z_uF`O@^{6AM@xFcg*0hDU}{sgkfIx~9F7`bpKYXugu!HeMLh#nEgfP&)xCJZuMA5u z7fM(Y;o*f&6or844iD1HxSvl{EG>FhxV7!vnPh^&BQH4VQthGgrwUh6>xhN3MkSSP ztEcX_m2Fbw8D4nz}wa>v7wZV!vyDn=u^^vbib_(ki6oWz}#z0Hy|OL$9yzySQC1lv4G?MVv5E>eHB= zhXfhmT|hX2;{XBz-|xon6?BN`Tgx>U+avts0f<>ZFJ-;htO#5m+eestZ~%+KlGNf{ z=z=S+`r^GG;1cg%pG_ZSuwViAiPUgCfTDe;<;G_QXNLnaGsl><@qGx*iMPUtr-%R1 zY2@#`}|)D<`hqkdSL^TKl=}WQNFfE6?T{s8q2~)8s$YKTQXx_(Qj#$+9TjXHcO( z22PrT84=$7rt+-&V>Dfyopo^|GFl+F02#p3UdF?~!!6wi4No&9>&fRJ{=)8SpEO43XoQPmgx5g%eeGs=_=T;B@{i-X1=rJQRJ$1(bZqMW(!zw+(b|Ahk z8#E)1s^+#=O&w*DwOdwZFBBFluU)BDe7l6cA1b1e(hD2r=51 zo5^Yv@8acI8xFnYowT75iA+g`ujl}}nDhugJGud<^d7}~*7P=YCxcf!*kSEsJXk3f zN7yK8A4^A~*Ms!63@QWe#HRQmZY+c~#pGz*REq395K{B5II`0fMdyE(%MG9AWOr)2 za2XaNZM~4S0+JlR|3(g1+hw#)0kq&MneQX^H>VKSKFSRUTi6^?m{)!9^IjtLMdQ~@ zB0rGz0FPXlh@y1|-U3%lRH2%=E+$^sn=?C=&ZxX~)`{#1iq0_GM)KWO51d-fSHD{q zNZC7Ql82;@P$IHd{?DCknR4wVhE=yI;ZRcwSh8J7dG@4A&{6T6KVzmgln`7Nb5FI% zJ)MCcxy=IMqt2;K@Idup_!~Kt7`(T`NU-18(Cq*WNUl9@c-#LTPiW6!rnVr=-Iu^| z?ON~1G%y@1_IeNEFU&2(d|3I){YL3RVvEX~*%58Q25qAy*0bO{QuNdNmJP-IaYK*s zS$lBr`9P%QaGZsRpt#5T2!eUo6_02m2Rs@(S-JLLrj_8^o$^of66+N>g(pdC{KkH5Q0HIFUh{<}TqsaYpd(O{N&B^Oh*F}&-K$32;s}46etZzr^E8lp4 z_%5T1w~f_q+{TzSDa1dp9fGEXU-Mxq(cL}`-|&rA;^_|bshXPpjEn1em)N^&v*Haj zw31r!7%lc9bHcuasvSOb95lYy!EEcuwrhcX^p}=YI3ri7L6149fXiHMM4GCcp>b>F zvqVEo+%MXbQ$M3K4?l*1thmYSJ$`O=IJ!P2&&0!0hD|$n6E>@&NKI!KI>@3ciq$s# zJALOrFM{auBArV(irxL^OJaRY8<|^n`05@dMN@{$>4-^O4S?g zCMCBKego;WyGMjv@!0mA<1eL3$YISmwGHHPitM1MWzp`;E5D~hPG|s3(9_^vUR}ho zh6X$%{CQ9QqUagEcz{dlfLoCUU5cvM)gBVSWC_kBZTH0=zuB?ZcccrNs(>%F(`)0NR_R20zcm#)UhOjat4JI$R>!V!>s>5^H)f<$#KVr(!Jx++@yb8%uBbq!8-lWF zLEunsSIRugaMgu??r~i#zpVsaHC@EK8QinY5{7;DK!G94fo&lE&pq|q!uaUW%ILWm zG}{eySEwH0@s%5MJs$kJnv`yWXWJAeA%mbI#tH8gRXl*GE?xf>Ot4?|a}844Pr&#Cml%4Z zcmKP`9{WKG4sk@LxnJh7D?U{FI0^z>keg`;y=SOm4mBLN`M|RNR6gh@jsP&zK2T<4qDE;0OJ*mI-<_c!HBAQC%ddV*`FLkfO(3MsB=L1 zh5$sc93)E3Oe|$-;F^5L^DYxDFYPWFA;86`zO{8qSDTp;;O+VoXO7>UE4$^FD?`FR zO_KE5@KQ?_isEo!gTY9*m-*hTet2FnUf-sGwlEWnsZCk{VJJD3IdK00yOODbQCom) zGAs?B$hSU}&ilnm0px}i?^xV|!7@GOG=&9n&^v%AUP{*dO>Y4XD8h?%G59MMl}GxK zAivU`DZ2`~#JgRY3B_`tKCb5RQ1Ig}(+^*^oG2pFzukpZ+co=1z4LI3mn zAu{}e=XzMkb_7KZHgz7o`(gu_jwJ&PsGCr-sR2ta^Vr=I7HGeFIHQ{${9X4me#=Q>v*s4214Z$(4wL%zDhDoxA*!q8@!@pJuCcygJ;!e9WH?rO3a9x~c(oo=m z1rQt2i1S^HViCquJEL4J9o@q)H}iBe{opRx#8!IQ&tqs;M-J8msOZ^l4Cl6sr&4_X zRCC*HBbtLoIXV$DY^+nu5QDLl{Ap+oX@}5&X&s*Qkcm1L6*&<9QNqU!y(Pt+&^sV) zIv5i=E8xZ4WBh*W8Z^j5n-B5v;!6OE+Z@FjvuL^taK*2{+L~cwq~DL|np}E35$9zh zF+a@-)gANC@!!aCer8k;-v>fY)f}TWH9p2G<-Wl4h13oCwl?6dd=|3&-RX`gYtFE9 zwL%!o`yO2n6)HlW1+o+2LSjnUv5NS`$&kx$=-_s`C0oFGs&l6L_w@SBTz9i~l(D%R z%s0VuA=R&W-3~ZT;3`2i!2x_dp304Vmqv0N?`5oDqrOoa8S&^ConO$}INMC*&xIpL z!5I?uqMqx+o}3`$O!4HpXoU@C2LbGbAoI z8!eIwm_n0dH8*v+o=D*LLG-`UtCX{966r1Ftpv17e<}A77^jbZp9M_2e}VH2um4?! z^BI?y)vMLj{>Z_W-J;Of7OkIzK_ON>0R^hEjKr!-dpcd0;4a;;BO~CLT$)b*VJlv$Ldy`3id-h%!RB)hF=A(!x{L za${NppbPLiV?y9gyRK+3$g~e3me$3b9u_rNL=y5pKPy8}xP$ve_e|VHoC!>D$JuW` zWTeJ41~coe-dw}+L*<3BDf?q+^g9NT&=Q0WvcI4NdX4=ZB;rMnJy-K>5Mc2RN(rl@NuhZ{pb_SW#T~cpD&!>Jiex`sW6KOlN6kQx3y#IChT> z&x{#ZWO2``U`dfn-VyB~g((u*qzD(-%J6YC@OhCqLqK&Aj5ob@%vwWscv^uTybc3l z0Ks%ViJdYFQxlpfz<}D2AxnHLlgRcOLWfoB!jAcUAouBH*+l9%MJqPo_hwrCffC& zhiaoTv4&`El(R-rLH76MuYd^_UW8KcrbJEo{Js^)`xs_6Fq#dr(I3Db3ab&D){2ja zCrqem_oQ{H;Sn#XR4wvzALBYE(nrxyy+My|H+04(=06f930=Mh#blsrOF8p;ke0?{ zzoBmb&@56rQE>lIkDHRTKw8Ih&GU@U5y|*=!BT!|Ufpyr!HoGsp>&)pN$hYV`TPSn zW%r}#wQ(mH!OO8OtQl^NxD2-pEw~pPWkg|V@ED@k6WysWX zoTc?==4KIhnO(^m`QnRwM2|2}ruX>7D)w%!UU4?_Nu#+NPd~^I7DL|3ewr=b0`r2J z^78)xVM2v8h+vRAUIwcF=xBMh;$Tte7eY{A$e{-9M)xt;s|k;l4?OI?pu9iAJ^ zv!^(K7rnLceJahifJT@$^~yNd7N0hzo=-wJ)u95-*<&ShC=%m?DJBRpFW&wiT9|U& zw)KFG%9Qu-L#E|aWpUkc^Hex_2b#U(V9Isq&h0W?)w2Cc`%0VeOh~eGU8Do)Nt%gN zPQ`|_!i@VE5rK=?x2ZVovKt}UdqgaD7{Tpk_a81@pJcyw{)xJ8t054G>_)2 zHwx611B3_&@c$uMq&uU_P_K8jRp4 zTYDJL{tvdaY5T1o4_17~zv`J7q?{oAuBh*QPG@A(cZVc+7sl8G{q?G0=*U=G&GS|B znDJJp+vP#>eqdOPeEiXeS3FEq>!l}&^l)Oyc zd2J{z*;7hJsdfKO7af-AlyeG#Ir4?S`7GY#!EG!gtHrSOy4K7jsZ~*xacbm~Ex{un z_!PfiUXBwuAh%S!$x{*--av8-&R%f_?XlT(2qE6T zeLbf^%>8Q?iGk4<@xpr*6#X-Kx^^@{rt&w59T!4Bb>-)KEs4>F!;uh%fto~bfm#!$F&bgoT^YEVBkADxBo> zu7+EYK*p;EBYS#pgxDGPf=<{ob4LLU4sgE|5ROkd z`lq-)0h-JzlE0%2C%Ovvhh#~Um*oq8eF^KP0$&A5Ac_+re^>4H8v48cFRs>ZLQ+Rw z-Tt@Q*f4HMTd}S8ExT#_ID9?RRWu^<^XW<$ZLDVkEqPBp5@~L@_i}24Z-r4&aBR7& zLEIE$eJW#%9DtdNO*+~mUZ>hSw+)NXpAU#)4|y&I<|!Kj%ivWteC-Lf`rLe_AooRF zfZ#{0<#qbJA`et4kEx_G%t-8+avydVXP%bU5;9LeoW_}`&zR+{y-5Q4|W`juPWH$xm4 zj2ztuWN+W~6B3`*mOz3DkyucMj&Q0_NyhKLtV=uSK^Y1P27rGPu*0iebF`nBhys|Q zfA}ZTR?u@NyrOf6qiOAT zC+QH*rdlqy^nQk`2@p6Q^(&>Qwd)1Ip*D82cZCgX*&aM2*2_;(=5Tw6kD3c`P;*VM zV~h!42_zg5tUgL~Y(3aW$c;#FHMLFmFR(y$W{!e=3~Nh<_d*wJHEBDycIeYgtxYsa zb5%A-*{xOMaX@pvhD#`6xDM_)n~Vz#U-~NMloJRGAyydIJ8LGO##U@OI+Mb4mfC=cPeb;Y=Cn7^#Z~ zMcfD0&IF1e_vEwLStC>-68(vWC7ps>MM|Yl=o@b5>Vzy`C<{wy#$0X|8Bb|tgd_xO z>DSD#M?8Ky)W$65Xk~wI}+$>~wX00hquyN5oHbpTY!u!^DqI%X+} zG#)>?zf=7#(a~)Zsr#>dGiVQ;vL?3Rs6S%sOG)+DVIp<<#`!@G0kPrlGJ0)HC7-(( z%9CEsF2GYrvM55NHg)YxO9>P5h}Nspnp_nnWm*Y2y31S{a5o%Dwhi^WE;&fGAYL_OIY%^R%^AJWTM zGU>}c>06;85X<$!l)4gKI){`+M`{WS&R_>6^}4@9|LLR%CX_CwzAed zM|8f^k6y=GhvL~OSkwP_GJl`O$kw;t_7>C722_*zXg*WrW1(oV)5_j8Rsi)Kxf83f zpk5PKQ-}C&#y>1d6ydq6+NO0V?%l^jOZju?14f54x3Jw)McaDR+T7?Uv3-Y*q%!93 z7V&bOvh{FIKo3^BlT}smsTUJMv_{d$-I>!H86}x!%lX^eACvzLpF5Ts%c|<-jM*Em zv3M`eze-Kga@NhoJo1avMI$`LJ<~{G{LBGS3 zdO<+q8POm`L7@lg@6DD3&(VGLt~XwQCusL%3bJ6a;YooD3QE%4ZY?#@OrUfREL$uN z@$r7sah~r}=!(-}BBqh&_ZaYDnQur@s9N*ZmZ8Kl+C=l~UUa79G1VAzg>L$J(%gKN zp$BS;xtsU?PpQ`S7YI@M_DzVSPp;3K9i|a?x2h`h$f+EiOVIDzeM_Q%&frKISN>h3 z09}CDrlV_&zp;ml!FtnO`0m^T%Cy!F5?`lx%hy6GlwAzomS0_!fHrDpGaoukJ>NS} zJEj&aZ=7@DdAd>~j!!f9ZPofNbkutdKB^h;1*nqEU?PfI4&k$p&9~cUA`rmp^8KU6 z^icq}R+pAe@>rXSJ-PWkSZ_yWx+Go3oy%l{4A`OV<*4^~ZeYJd%h_P7bVcc`6SztL z1JMn6U|I!N*Kaok*NyQhC^#_>={}@WUN66+{L6oq71nMCE^eB)9o`Z!Dntk;$2NhV zh5J2-%Bk&GbO0?UOq^jg(wsxM?8eMBX8<{-`rpAP0%6U&qEF`9YC^fbz}r@e)2Itv zDAfF;76c`65$O#?thA^m7A-?0SZ(-_Ip1&c%4z!>(5B`5288a`Ot;#L?Ze0QGYF@( z-8VGE71>1K$=vfu{$3cC;d<~t60X8MO*;vU#7>)lu?!rjcmke5P0HiOJ*r}4DC5l} zCB}UI4%>)}qo1}kag113QlbwmBv(3RjvL-h7#4Ap+5mS8%?b}f4&l*a;!9`1=CgoX z*t^2$-2*Mg`JQenUnovjx$!2@!i_f&B6fl^%u-y zaO96sjSyF^%w?)#+5`GqfGw1!idDr~tzxu3MZ7n4Ir@rIEGkKGgXhv@`bEZk75N&& zr8$TY;m;(YLus$S-x$9#tW#MLupf>?TO)O!qNhRz0nKA{KW@f2*HGQ)x52&6d3Ub3 zJ`?vbMi266>k?avXi$WYmada@5-;{KjPhdp5qhGA8~MUpH%!VB$<@)Gc0$NCc4^o~yMiVr^H-j^WzlB3u5paRN z02K@qVX~g1JXtn?fkMkRMEJ`Pcaii`V6~q7G4dVyUhXyaawWJpsR8kz?7rHGKF0-E zU5`gEiH1C&@Kb3}AYMpwJdNk$J*cq8)Rh+_(+je^9}e(yA}LH{tdUT^kO9|eu++_+xsCffbL*m)psn4C zFlZMlIi;6@$+-i!CuZ3;Iz9!zbhV0LHgyk90K;kP7#@iU=^qkzJQ=A`MWbK0&3)k{ zU>3`tlXG38|80?*3}n-qm zprxWVB+}K#ep=cDx5O3#H^+3yp^Ca*vV{RTHubj0*$I~yy1-fvfS0hr&qdcMtFxg= zaNM;zY}?KFJgu-NnT`&v=3O=K@7VR<$347{n91}lcPn)?m5p`ZYFPekda~EMeiD|O z&=>e?4U(X^I2Jhn*pZ8VajvK<&8`d_;NM0>!Z=!|8QrXZy z-U|@xvMU(&VbZz5p&X#sJhsdo&6xuz2U4dbt0dCA^bgFDwSyXv-fxfW&Y3fdK;tnKj^(cv@2C5PP2&%MudA2+K(4KuONcNY#Fnj7Xc+uy{p%S_!JRQ=wAB%kPp_Ec@Wqjy z50T3$c?MqYe$u(TlTAcPWn*}UIIc8qLM8mCZPz?o6bJ~g-LDgARe`w zE}IMh&PaMi%|MHB?9SFmIp_qq?QyROq)0VRyfceFn}RTp1xuNyyE^ek0vXv&u$`r@ez$bv&isT z;Jr($8AcW_ahc;?IiRq@K(ZMg6YO(a$;*wGyfV)7I0F)9!XYd*ImhaIZg^iobU()b z&hIiKLq^MQIJ!^+`&B4F4n0BYd6MTSSm!5CQ@TbkR88v^F#=!z}1kD8ZRyXRfqIl-jP@NJ=i+8v)-e zg4<~}gjYl2{o%$}MG+NoU|rW1HE5r#}D6qQ7geSqqJUo>P)@w~87O^LT2a{n-+S4$>!MC}G?flW zK4ZUrU+jkIH7i7V>ej5XgA>dcK;tv~@A+As1jpFkmLb7G7Do~b1X27Kd!3m%IdDqs zB9a5qz07h|owDo96h4(*Fwza0MPWFJt=F`s^aj0p+dX{o{}$@t;>4v!Y(aaVBAYB! z9Z!FMV5;Ge=qy!GiVsdqlAR4bp*t%m^ndLV#wXov4wM?hTD!uKMnB+=m?$eTU;)F_B@gR{btF+-r z^6~zBxF(1k;v_sG;R&uReE(lo$>pT1r=xFir=+#e7!Yc}G+>Z}I92l&Brbxlr|1I) z0Fx8>3}0Zz#gP=|ccwVfjDhsTzlf_S*e7!a9vt~%8CBwP%6Op?5Ns7f;|6Jv7+r`{ zZD-!JWf3I>(J=bjrb}+3oc*+HuAT;0RNRpL?jIjkxXh4xKjBXRB8(>+z;c!%rTj8OoaJ(M9WOkf8ugJAI*!b5+9N($SR2`^WDeXoJNqV1+?qyT0C| zuHs3Y4PIZyShi;Py0Js|{KKf^T#9&Jv~$OY;}CqK!9lC}NloM1=-saf9kfD%zt)#! zVxO=UMgyYVE$dfY*IdGwA>v!Re+|P93Tfb+u%cep_-iVg^2`KMW}zVU4^M8Z)G7Sr zf~g&RRDZZ!5+KNh8j$-Qfei8NYC`G_lPuJ`(ZJE0oRq!qNzmfZ)+;4Y0Xjcu$VXu+ zW*IH9{dZhkvRXkS8vib`=2)AH1t`MDa|1s*N4rzC*lmc(Lu4i5GU`mY*?_Wl=rnL= ze<=zn3x(ipf6lhfvKNp~sE~fq`62_>HAtE65f^;~=8;)BHVt=W4*~WnDyy!28X?-~ z6kI(H-oJO4Dz$nHJgN`f^pYhTKulU@ubm!JNj5Qb3j!7`!l!kG>u6ERnLSF);PqhQ zRM=phbf|;mY;E|w*-mO(m!Ap61&^dv+Y8~PtfQGwU&j&xgHP{~85=bu2;pW>6O{Ah znqS**RF=&-F1#9&eP6VG{3RqH3KLHFr^-+_<88*G9zM~N8IcpjN_^msQ)pjjp+SGy zK1kuB$v8krB~V~UUZ{A}lqUaJGH)13yxe|jUaI9Ue=Qy`IXeuCAs7ZbyDiV*jw>Tt zpdu3v=QTPH2IJzw(!+O!x8YN(#qV0rG&iYNY^k(v&-MktD*xu6A0%3 zy$je;a4Dnkqx=UQUEqOOx|CU3*=&0Xrl|QT$+5}2vYFFGV*z~+7GDXi<+jk%fbe&Q z60jKKc!pcVWs7HtBbOW9QTW1iS>2i<9o9q23P*5iTr&<3B?;nJ zH%|k1w#U){=dC=eUO9pn7b4)q^^<+=_$~JgZChm?j=s&NpXPI;2QT6n<`|T^N8*tp z!Ki032RfBMw7o@jUh&Ge7kDb8@-9)2mW;HG!0^JrpiP<`%{J-*e@Ikb1c5wit3Vxc zNz5e}RmG+bs|^fLe?EqyKh?Ek4xx0-kzU}qegM~>+xrDe=h>P(^rZbjsOQoKl}rR3FkC)%3%I-wTL4`1!2 zI}gh+##PL8zHTe8UkvxB_fyEr1}h=I1`a_Ix zMbUCKdP+sF{D=#oE1fyjd~=JOapzs_vO%9T5Z5jF5%sz0&>cvDDf^r;xh>4Uu-?{+ zLZ1j@yfVl^3eS@bz0C+06B9F?y@QW5tGJUld7|5mrwi}lk49g0R062vHfrwtjqJFt z`RB_B(C|NZ(JfxN#sgOUw@(Jgrs>vRGB9;7Pa3Q3f7XSHWvxO-&(<{&WDZFfi(y+= z=8F_6T31HlIXgNt=U^VB93!wPf|1=nhy&cuL%Qb`G1SS5l4n8K6SCp^o(T=lgG=a} zNx98ynYE!JNr9CAdA0zb`*{%IcZ?$0E}Ho3?I5uSHB!xYZy+8~j#hM$z2`Jy6_EHMu{PmzkZFTP(d(2W4$h56xi3Gp^?7u^2vq`gI7tjX- z1g<+ar5eNo8R`bOoGXFo-nn%WrP7-K9|E>c@U~nyAA6X-eu7188~0T83V+E8&pNCk zxq$Zebww%QaH+3JcE>*fRNii#DJA{B*kS|C)}zEW+#R18q@ixsY}nm1bcE{kZ6ogAq9G8N32Gm8wr!*Pt6YQ-(BlvT zPZr5%)uM&5NuUb@(FQ}sRu?ZWYbOk=g?p>E@;@^u{^^i&HJ%M320dck`i*SiX*ss; ze2$GA5*xlcT;7cC?TP|cI-csW#|%g|F043uimsxr<#03AaZDd+SeEwX6RtY?IhSg% zK%t2Zc$Dx)4UHvx)mt`D07pQ$zq~lbCK5+2Ex0~rIe{_ysZH(1Eo0F#3Q1}k>oiDY z{^Rm&y)u9pa&Mv$=rt2+=l3%PUq1$D!-VpcjP{ZuB<=l2LMN?UHJI|&j=H0H4F1?r zT52}G7jn$(yA^}XFnUdda@?T3=IvD7sm!!+X;qTefS!@5kvd*sh0W-McmJ}dUdm`m z$3oS@H~j^MOYhQ#R_n~iKZ&xz3PP7rG4L=xmUX`l(UIs%F`Pn27ylx))_lIqe~!!! z&R<0CMWs%2R0^o*x51D>{6L4!eBE4{iC*4?$Yy$yIajXk+p5cAMpeT)6QW8;Ur|K1 zgpsQRc|yFWz@VAd+1Yl>>Q}V?BiY3jqk+^#>;)U+ zH-W}TK-urnYl>g*suQJaH=Y?E_dr;9bQ?NbNth41E;o_&jxEaIfQOhUA<$MSTvy; zd{Sz!CS=}8mosm*6VbAXcJP{Uvc6c*t{?^)MT{~aB#hJWz4_H{JtOzfkE$SwXQjv0 zZNZK%(N&*EDRV_HN}3M67q1y(*u#Yw1G?SNqe2AT1`l?@x?lW(*{FA(5^c2dI9!HI z!#7LA66)RXz!op=h(kKto0WW3*Yq^PyG1O<5Jo(o$mknfj+u-Zw14DsjACO&S&;Ku z{ZaJD2}qK)E1$d!LS&F(yfnQPG2C|m7I)U$xwHpLEXe05`dpVwp56s3>NbV>uTil& zh1xm_1yy@kGe%E_X|QFS6|=Yx-05>*60Nw-v`|e#1M@$A5EQaVig=ACd4?yc2ma^b zDH5io&>(e(()>CCtY15eq)}-_wx>8ve$(9b2~FKPBC#K!g7f%qSRgLW!M8AlfM5E| zQgrmE0|GC)u6jwZcIeFbXC> zu!+%oNQv9g58_*aDE#jic5B zwC{u(;7zE)kZ&s&X4QAec z$m>t8gk3m9csEXh2N8qR?6*?QoCdGDftQ(jKJKm{hdpSI{62l;Ym$@K*9enor*hUT zf_L;DI*kx&v5JL0RafLbCxqduchYY*pa{CZZlB=$skLoZ87>+-wbckVVst_eyuk^Z zZ7(wi=9iU}jC1Lveh!kb-SJ;nuxTc@ret(dFZlklgBI7@aiP7F=jQ-1zyV1Erswk$ z>N*1HUZ-bn%GIG^CE($0w%Gg(zJD{PpzIXiLnG&M53{0kjUA*UzgUn91kp(&40N@& zAp!QkU+=qHj$w=6g;Vh>axWkn7%A0o?(c;o>JLhpF*}>HP(|VUC|gAD7j~b`xU$K+ zAXNVNv|{nD%ygj;YF^?~LX{e1kGfzWi`4ZjgN2ewg$iR+U0H9oE79pl0D9=q(H(H@ zQ%FG*9r8tv4e{@0Vw9)k_k>e84wY+od?>#mxK>HB#t1;-vh<|TLjE4ZTde1T03Xz!#<%~u~SH0xP?pp4AY>YGfMp?!e~T(>pq^DoY5% zfvqkJR3C~Y)%?Vsz=Us>Z)5BL`6Zgz#HZDCOf};V_#715WMNq^G!YtQYu<^dEBW;b zUE1IG$#lIx7t!2qz&AW4a0nJfp|~^-Tm4x)k{WUR)(3Zspyftk{circbvFUj`aQe7 zTD72Uvvk02wEu_{X1K9LL{0!VdU*TbHMNtvL#^N4#1n{Lm>wq8su+31*uTM~U+7D$ z6hJU&;%JSZ)sd$EFSMz7Q&_QqhZsE#QY%XE-^3E;YOlNE*=Up?j@zlW6LFKDlHcF0 zr>qxtII|-4U02pfcN7))0D^S^gBsorvV?}WVzeQ2h!Ai@673@D#KA`9HRh0a0ds9( zPx`czVeWo0vRazb(W|J%!z?{bU9Mn*SBDcm53Zb&qW^itO-6&iSG1ak zBJV)~S5Jx(B~FDQ8s9UTtMoGc{15c-83N*;PJ>;qX0WndMLsb~N{2pVME7 z$G3mP1q6q9z-sdTdYY8bfA%`^58KfGH=+dm*UI~$-g%PF${SH$M{S3SB+KBaS*nnM zP^g{tQ>;zt&7uf$&k4%d5&t-(^sS9_(v0oWhzE3!sFg!TSYTghdQnu zE?)fn5rGlMUDOs`Bcz*Dr)Q;0Iz?Ea_a3Mb3w`qPQyvUSzoO9{PP4g6x3|h#wK<|| z1=QMm#WMRC+eJuxA73(Ke#y$(qP7p4)F4D$?Uw&%{LVZOq+_;W{9;}A!i>R9?KJef z&RJQGKf}$03nTZZKwFk-KL{w;qQ}iB8cHX3;cr`WbDsFMOl+b@;-AS3oZ`B)mNlPc z?@bE45)*{U)t|csIBBTqam)()cAUo6Qs2Y z$<4w$>@)}D@I;Yke1T}&m5M}t*mc+`!>Sr|@h1aZ$jyjKFd%;^U_6ym(}Uo41^N5L z@;B-GSJvEdx%VEQ@N`b=C`W;JAx%6Nhf}iKZ4!6m0md7WM&;JZt@>epbVqf+oJ z!*~AOjLbjWWene1at{7h2ZGxbPclOlG9W{^Nqb-(QiuP0uf`<1Q3pP+j32NLcaRme z{UYujeZBo!V`CJvcpp$YKST3~^$C>WYP=|%`cJOnJ%zAC71zey))E`{9-u~I8QPYU zT~}INL4Cp8d{-XxQl9~syH%mp;wBkV2@6;4zEy#g7H z`Ol!yZ|{2f7WQiPlF2V>*V1?C#DA&F>7uSZSzx57)z-Xn)uy>y;8uMX-V?n()`MNOA zL;g<0@K2)n@~f=M+&*~#ZRN(|;hdSxJqC^5I9US?h6JSkHsymFgSsT^+lC-`+R0`23IZwy4zkc7J=Av$gA4Q*I*~JnuZjCf+99#ZLk1yTp9oW z$Ska9mdUF6dtF)=R&Qv;|a`?VfI4t283G zxSzcKRlvY|;c#w0w6T?jwsaNnntz8;=K@`KI}-w;oXzY%_#`3Qhy{J=qNYpqtkbSy z@q~s|0V`6vy|tz7q$m#UdJ4$V1;JEakMx61eH-Akba7VXtm}}gsSS2Q130KghtUHF z-;=HC#r62O=;D3S^eB?W%&;+2D@8|A+9oC$r-(Ec)6VNKs+*hgA+!~IuE-jT7NS_} zwB|r8{Q|h?j>oa+X9}*;OT2#zNrw%X72h!iS3l46jMBk16j~`BOv_(-*$(ablPNRw zEQ`|@av`yDDuY8#(PA~1wjde^PDOf?q6?d<4o35mx<6pm=a9CIL@%(XXtscl;!^GV8S zTa-U%*ORm?pD=fInT+s$nLe0kvHGMLG>RVgUraf)%VBXUL1*JEaj#oE0k6F*=Ov;6 zhOYB%nyd}=k#BS=YJWXpGZ6s1sh7PEl;|mtSzde5^(2mNX56^_;@8ZQnZ0nPN}rDI zVHC*!o#3YXLDi>)oc00&DBg&Ja+CYoN{#VQ1<r-|2|U?#-Ho_)GjRE1L%7*w#2R@uV1^W&3QS{QmzMsph9$l>)&fi+=7l8Cj$f zr9z9Jgy3JFL*#FqO~Y4QnUtXb)P1eWaflqzCisb&y-qDGt7_jw0Pc-eT}3ewLneJ3 zkqe=FF6~-}sC)}|Y7tVvgEB&M-CvJ!pYjYBmivRXOcogN*iP@knGE(Vd(mLVW0sGS z-PFfjK1^~6?V*~;b6Nw9^rDNyqn-QvWgWo5A+y8KH_ ziBT1B!R>Y5-x#=T0B-Lolu3OU^H5%cw4SfFph}gm1m1-{aaAF*OoI6J;7-}>WwcGK z*^=4^mZpz*cExQqCdpiS5V};h+s4XqKtYQ|y?WU&I)6UK)n9cc>b#qY=r0+qczb;PGR}Wd_d2=lNUV zHuouw-g!0WD^INhu^xscXxIsFg;IyV6i(Y`8T+gi?OO;71zIDyU6*11^161R!jNhv zI%YEVTnu~IP9mn=yVI_)ujm!Zx3Il=h=(IdM={q~2y=ALR+qtwBXMc-Y*;8Z2o=4- z#jeAR+rS@}AByN5mLE)lJr?nlf)rLMxJG&vPmaVKJpWEK4|D3aLDUP~cKtK^b#(`J zOLRnzc<-;L7hARN`tWv|-n7QHW;Vjxt?oBHf*Wxo4P3?|uBH)t_-K46wXv*)Z=|82 z_0{vEBrID>bnA^bq^#F0qN~uX0Du*E-9G}n^QC*vrTA=G&|s0Bq&V&@3w|bl_e~Th zUS=I`v0w!;t-^P@gvC8W$@CTbnYh`4>{uwCVa{F83MuQ zSAPykQT4)CM2LsTigGU8=+&VgfXUuSoDX(OnYJH+we0c+*?*4#{DAfh7-jo2Dx`wp z%Gmo9fN?43HM9EHIzt=Zv(VAK0CXg-w`aNiZ(9NMl)UjvmpC_39Sf_p+2JQb2}zp< zLMfNCz3^iB_5BMb?MtYZgd_vklZ=0RNps^-a9lmIJZ`Ysoy--Vj zkE~xqoW*BSWOR#gHj4ia<|>gukv)SQOzETe+LHeYNeGgL7b3H#afO+Gp0(Hubn>=k zS}*~!Lln_iMh8~1iTC$*NFFcu^B17rAZ5;DGTjX=wy7x!6w@$iD^BtlY%dj-HXY4ob(vbDRMI>6|6_Vo9fGpM*B*0k13= zS=F2%TUtpd!T5r^+bUi_^#Q4Ztv^tLf@sR3GYm3x?wS+Y-?zBs(kuW%)#4_~NCRvZ z4q#6>6f<|iO|DzaN1e*omz_RWONMiucqFi-GLF`Lq2&0&>3x zOs`OSTsnIPo)1BrP@4HLU#_>bf7(|roThk;=ZLJunxY+&Z=7Ms9_ej~M+I%clQ@V( zZFae;ySo|A{NnZKKbGAFRs2`yvF8iUaJYV;39?vF#-$794vDznKfgE^!-lp`8Okl2LxGx^sW>Xp4p>| zV*ubs@B1qgkp3ksAb8@}c+M2%YsT`U>&tIFl0g`lbiKbj+Am>Pvt&yH>e(W)h;M%U z)(ZN{U5^11HB@^T6;~#V`!#%vm9XghBu)h*G+aeSD%dkJ8~b!RvcO9)4G__s;rFeO zc>gFe;dk=%`sMvNF--L84H&9V%tup=1cq{W9wozb<^H%McwzRZiUe@z>Ufi$TKH|OtcQBfKKr;(@cZ)ryM2%Fubq;Sy4;(krSx&au z_4^m4!ryQ+08ugrs|W2JxVp@v)ghuTidrWqXJ*dz^^stQh;m31hED0_2kIDTR9~`P zuXqhaC!k?VZdbVYDcN$Zs3J9&^?Vkn7C67t3B@adoJh6Srm|`5ad2x z&9)A7DX6tION3X|BZ;v^dFK9O%<2yz5XNd^= z4Fv@|ANX4I5aB#%a_r_4h)`#}>?E(V`o|?M((@InaX}^k4bI3j7V9p#Du{Ox4KxEC z6w#C#CUup8y)Z!aIIqP68__#glcw=XFJ`X1d=`d=VXZYjGr`5(c0^$efh<1OC6>y8T55z*}8G$Uq5GXFO2zyo(DJzfwDH&?CTd$(O+@{k|T*EH+l z7%vo8I1G9Xu`kiZ#2Qmbakey+8wv!K2Zj#(+@XG}sUq(?;O}+x0w|SrKs|=~IuY0R z+1|1KQCdE!X`xZqstVg@_OqZ@Q;f2?F-(h?_ahW)H#?}OLv3zTwS45fiu=(}bSJM^tEL5BcPOYtxNgTJ-Vw^|q zZTOT^Nw}Yr)AlZwCOT-0E9_*qRL~sXZe^uqURfsE)ZAvcze#O@OIe9V(+AQ>1-YW* zAM?LNe#&1&6h~`U)-==2&bijEcz5r!%T%(I8V;BVkn;~#%#K`)Ai1&qR= zSDu+}42=rZ=5ekEVu&1twp#yGRZLe*{>({|g(#UiszXK!bSpMzBk-W1t(!n-RtRGR z=5BpgJh%i`xMoo+(d%z=8t7>v%#t%YGlE?1Bvk;+O>>@5=#%G%)H!-I|<4O4x? zqDrj3tun&9zwRUX5qPThAl0PYI0K5}pbrOr5t8daLaXex(%$jIWa=Z5E#@wkVRs^f z-xh1oCkhV!&p&UBx3eDpbTdd*M8=FuI}%%;+P)Fy<7+p*Wk>1L!G}(pE8~-JZ>;@X zCY9WRBSf}O;^wv6op! znlFafZr}szWfy7Sxs-agAnlYaSn413+h;_dYO$wRDOUoP4!d*60VTTmif*{|3a=v8 ztx^Pl2;x8M-+RB>bpnPJH# zP)d8sk<+ndqHL`#+gYOV=NQq@_HC)6>W7HA4@U)$^Uv!7v1kqaOg!NADxXbe%AXr3 zbx>1Gz=}QdkGGciJM-Z`hsV$}%YzsavR&@u zQ{lzFCBXh}n;tJuEyu3aJToiTJ%uU=tw{+$;sB)(Rx$^vf1j;lw0fb?J*gA^Fe;?7 zv_WfJx-|!<2`Xr4{7|v4UfUuN9WK!V6)jY2$ou*&%lODrP~ym)qMdM)N4R&JHv`oF>OjycUQ zTuaog4-upwngWTvid4a5*m66XpJT(9+o;CJRKnLmDdN?Fzl-;ZK`kqof}0&t#~?Bd z`wD{bI#TyYD^QHeGM|=8o$LyqMe(XNWV`}x3@bR7vg**7MPn*gjquZ|#`EP0vgErLchIn)#IWz3;yG%Wsk#-IX1T+1 z1wZ7Z9L3bNn9LB=?IEIWKE3>|w;O|2n6zB6Ow6rFb{2GKaWO!?KILaNWVSH=5*P2O zDWH_(4U%QY%~4omJo=3dSHLf7jF&-24UU^=QXfqczw=d_sg%+(6RF4Bx-u@Kfndm# z{u{j4ToG<2;liFF!63~1Pv&>h; z(RaN$y!Lcg`=d0*a&(1ojDpuH5iypli$iV!is<7Yx4MW5VWsj6^S9+0+F1&7Np5*_K_a(zJRNmb0L5dm`O5jk!t^A2@UU7a zn7+!;{NxQ3mxrcCzPQ%>KsVgPqH`YFlkn5b&m4pRXM$CS4WTa09xiLp2}EGu2V2;a#g!yvT5a7 z1PveP^ENo2$AEb#oMM_9YVwA8G-H0 z+WsJB-wRvFWeG6+8GdG>5oD$v<){a~NHkW^4urrWheEe3H8?Ys_Q~_)#bPU2wz~LF zp#gBK`oKW~eJvSC54_bHD9ZEk9rnURSdYm6dH+IG;S{Fs7_@>V^)Y2}J`DjjPGzRp z100ebPo6af9D(cwJ;|<8fW{94!4Iw`WQ}ej_l`QwbGmh2@1OX1A5P9`sA!w1^ILk% zmF+_RaTh7q$UlP7r|4eiP??`(`XIGDrb4d`eBhl*L(~{dg9csAe&f76PXjO^z+M!K zZgL18+VT@2nES-6OOV?sy)#!x**uejZV2&OK)LQn5)gEm*b0Im zxZ4s7QGvBMEJ-6NjKz0~7QmZsuLRu1N9LbVLe8T}jzB=veZcSAUJec%^0Fl~%96=h zMcuk@YV#cGwK)Y>R^$E{D>Y zfMIw$r4)XgapSw*HnLbcf8x$EKh!8>DZfq#obmIPMNqK;0nx(ZZD0t`*h!jshP0F5 z^z5~_km#Y0*ZtirpVl{`%;ajd*aL(!McA$P;h=c5Eyp~1(j_K~VtV1~1srnt-*`_l z7FoJ~049%9NtH9!vhsf&PVTlNN(oqSMnM^!U$9(#YqyKLj>@vmEDmqIs%|Xz@JDCm zO8h>dWjRp*FzpW29Nm^j*&hk_tUs}fQIGFqPDelMdv`*Vm*>K0VBpr0*c!SBy?1~* za7@%9d?#rprjju^^R+@T9j^DFV@(I@QM~5A6th=Uu?o#o#Pp)xtuxt7Qe@oHQen+} zPUTqUO;fs>N`>5$a2o>`6A4JV-ci?@(C!|5F1%N&p^wPKd&)Y$X0-WpZDUAW-%RhCwm3J2@C16 z=H27pB|Iz=9@t0r|1wNivq9x2D%<+~lTxib6ukqmgM3&@43Tn*)4$W3mmd8^wI|qY zT)Sbz;u2sxPqJiaQlFsRyX6HX$>|9UZ3Ig&F5Ol?dxw?m8f?Slk7Iu^aY{ygBX5Y3 znB^Gtx3@oD%+GOK`+5OyZm{vM_Xv;Pt<5pE$kYmN7;4I#ZUIb+(?Ld!nB&Pqz2LS) z0w@%@?i5HgFmQl4hS+%eo{a^(9SSCjVPExo!=}^C<=k+7u#6?ah%i^kE%-R4V{5<} zI9g~gwReTw2E9JbvsD^^Q_4&l0ZJ6C|L0_S8|j)Ctez%y^SOeqZf+Ie(5`mK-bEEo zdRGTCjs3DlFicK7pJy^3DYZW(o)n$oa68(+N|oM&tG3fTCXw-cgpTM|Lc6LIH;&+M zjpMuEU^QY;a)RH)2hqv}s-Jb|^XyfaqH<>5b0|oUsxcQK#9e=|z>3%w}w*qH5@Fakg^>%;*n}T5n8zRTu zb1Z1~v_8ot8za@dG}jztk}rSpHDb;=C`T|S0-_U{m-g(9`?HpTq_W<#3X zXIU(maox>S3H={WYekMdiG@Q8+b_EkD-X;F#Y&TVB<9b`7#|qkLJ1!XzPi{Y&K`N+lXLEb{&dUK{fvjox z)yMB~R{p0wX z*qbg5e>+^mvZsMa(X-eZ0|XzE`FS%_&JX2ZB9D!u(>GGSRhsRM`(FN`Pw(^@n@Gc)Su>oT5k8z`qc?PmFm0<7?z&E zl798!ePD+HmI|3pJ(ZBae$+>>hBZ?#3O_N}%lmgzJ~ru2a%SeAkKoA=Wf}Vu17c@# zI@s(Sd)aj}H-XqE%%LKy1~qm!!9y*sc{CmLo&nbc3snSND4?wC6>@3Elh`||!UnT< zz+|?b2>yNqfmj+uqE^7Gczh3obd)vJ|M_>EefsRkJ1-Q=EaKoa+xe!QkmQ}sSbT-7 zZ@KwXLoc*4v`Yp0+ul3wEW+J!x@AD4uA}%2^k@z#{2;-YEp|_tPQ1+E=9aCf606ft zUOl427=)B;Hx$@%$5Y8ibG7*X+`{I8^=JyCD{v42RX%g>_&(|-m~JdXqT z0e9j#6||MmUS&mCkX}3HJT%sRy^x@-t?#H&YfMiY2Xu|1sw%q1m`z2o3F^^1@if!n zV7S+u0L5U}l6oO(A_S=9ojdi^FxCyAI+%63wRU5wV5P=XXHBiICOU5#2W*0zCP@^#P`vry3>vyiK>0UQ2O4QHm{X1Sfr-E}C}ga|Yf6V4SxR&6Iie z)Av&Yy$x0_#mn<4^I?TrbDB8NGZt&HVyVZdU}s$5?@Vw2o{u@Jw{g)_qkGEr5>-Zl zCQE&i+O9&l1|6QsTfGfK{igQGM+-59_l+u7kZ>c3O|sFS?hv7eh|8^@dTe`kFgNxA zu40+1e}-kAY-agt0}o<4TlMLImBk1Y+Pj_04tpVPcGh%ft01LRD^T>v^ysoTs1`Ku zVz_Xg{{mr{5OhEKSM#gj4oSYNR-h|Etbl$&M z&qk`ntrsY%S!`lu$Oi3f_Ew;3GnYQd;6N2V1_qps-PjF z%I;~pn$FX~>cV49Xjxwf66C9t5a+L8<&*7;6Il8zm`h+-bky-e-eStm71~!mRxx=9 z*F!D!$O}aLC3axFmCvfI$?vdMe---|;LzshXMxx#%ej@f;MPryLZ{qg7N2z>Z2>ID z6S(2%!G)VK>^bNPMrrTmrC%!KY=6A7nKvjnv{p?Pge8KayCMHDC4fM!eA{npT` z1Ax{p2S@ivOa2{^_(5cK_lqyJ^lCLUPJdY6N@QK*bCW zMZ%*g-G8Uq#!^-bB{>?Ut9xa4Vk{`TmBzCgDVaq_+OagPm6X?k#r@3e zB9J_gKs#9Q;F(;aVHgQ0+I>F;McsT$ahq-pE;Z9=rGQ4;8Sb!rXMZ}yGUR}ZSQQ~_ z;Qzmx0r_IRZ+IvHynh0DL4Yi5>B%wAj*QmqViP1yakr<;Wvp8&1^E|RY|TL!N1X~) zXh#lWy}vJz28IRF2VOt5NV&^QIGF<7hW$}S8XJKB-?=|n*yr8uTZ86_@q8o;qHtr2 z_i9xe2yf(50uMAm)IrgO5Xkg`7q0;bu~Vi3tFsZ<8vowh4^$5;MP0>I`;UJqNYgJ9 z%m&WeLvLf!lg}C-4oXfHvCecjKu(5{;K2r#KO2&dvAE>AOW6e9y+Dytl|rwj5dtCR zXu#Gj(kB`6w87GO5I1wQEN!Bs^pRqzaf`}`Q0`LmDy!duH{dWPdcC=gMfkCB3>sW;6q@sCUQ6Cs})d2J&;_q zx|Jthj#6#w!zUTJ==-sW$uGWmQ1K8%8r|3YUg}1_r<%4O|6CFiO@R*V{aCjc^_F9; zjq?cA&w!E@vTs;qUDCL0#dkw|WrxdCE6l#mO?{Qbp?0PTQsZ3vRg#Dp_$6LUjl+oK zA9rsgunS2A|7!}mjsU~(Xa0+PKHn@dp`7T<6w;dm%@g%9nuGGCW{o>C;TQ&2U~w2t zMW}Kaz&ccJHNLQ{sw69|^Hyd2-PdE$7oL#pzWXTsq?zPAMg0-DZPdC{+zQHvI{ksb zgR_spk1%nT#JN__y-TmY$Oo+sB$L2BxZqr$n}2_&XK|yyfw-{RtV~5%GMNHrYvc@B z=4w4DKiq`HoNAej%mh!rJ^%za#351VeHiCmmxiuNZ!t`oI7G}5u7n~~QX-3o=dSBn zl6ZjEi(;I;7ZcVJ43}w|BU#n^jbU`aA#PQs5lF3rZH-X)w_zST?v6YY$u=x8y_Zbo zP`vZALgXQ|1X!KO?ODJdX%a%|_qk1T9(pUuwhgtLRBI=}C_TKX-X#kegUasIoTc^|L$x)tr(MgQf4 z#pF1urm&BG8(0@X1KH~%#t?W)LyWvr3wLn~vO$XKlC!wLHTb}>c>DK&uamcPUtVF2zAPHxB^p<>}fuSwnU`0PV?1bn|3}Tu~0RRo21>t^FHC2Z8rmJcn40N~u4G;4DELqx4vQbwYiWSEEb9cGFYNSP<-zV^sNO zL8yMIq%!91o4TgzGLTfA{HL`Ar>|1N`qn6O+WG2|1_| zG0~nqrV`9@$9_kHlx8F&b%l^*g~&L$5`lu`HilJl`*#_Oe;)gRv@!9f3G$43_BwK`Ax z$ztxvCsRz z>8YO5<4pwS;=2KdQHet|G^XluF`C>Ivh!996T;3i9mo1xH*_`VJgo!6T7LudhU(uI ztl*p6+X5~oA_zyr;;aS^M1K20z2f9sq^X8pd-W2b_isvg?digP4cMLQ+c!*iie6QX z2R3#l0&!I-R8AU1a}h_S77H=}je6^E}E92hs~z!g)F?SWdWHo!|w0cEJ8rOX+VM@^J2&^EhSiE-9%*OSa8!#HhHn`*0jn) z;a0X}bdtHAk`NPSj?6{;_?S1zVB+}T5q2r!X7?jpUf0}~sYWqvMR7k}6)hNb3DJ*p zN!DEI2}~i}{NeW)%9y$cgB?8VV8&vt8DjiLE(LaXKCae~cHo&ZzD0?m*@yXp^ zB{f~thmwX7k9|-q=!JZr2#xLaOUAei5rc_>_w*j8?76=kO-v>HcSGq}s8CNhm@&bI zbn9R1(NFqnS6?pgN7NHexE5Ih{a{o>6cB}S2E6lc-{bDrnv&!wT9_i5b%>AvXR4OwJDg2b z8lrbTpV;whsOflKxPT@X>jHeFp1w1 zL4j$>S3J>#Jk`rDWGozzV5qlhXM8isF$pV_))=V}?F)y_igDZo`Te;4qA%?#Tuh8! z)XTUW{H=o;yU4yO=6-d#-?Npa5F@nI_O{{o>+ct0W?Oq7b1xwv&n1xzh>wGUJ+&1D zI?5{tK`46p@iz{ja5;!zm2Vv~;!TPKXJY+AaYfFvTVc;qK_!*gkj9vEVK$Nii1&Ok zOjN8}7*Z7NSb|ESccJl^)em+7lxA0&DbC0WY73a0n8VQ~E%{t+#55xpK_f1rxHwB- zvs-38n7*`M)-@Ue*g2b0uct@2b@m=4Kh8R^JcGyVtjfb=s64t`C12A(A-6hhipp{K z`?)=HY=Ho18j(Efdbxy}TU{1QX7JB%;67+sM{}nUaOk{3Lo%>S?ozz|ib@azM&niR z#Wb|7faCE(7#Lc0%~0UNvPO@#<9@s`rBo&NBUU1@dWbS9p-gpcOEdb1J63d0Ivx-5 z?C7fi{(B4`_kUJg6l0f+V)sdzmW{C^9X(E~TtZB0&F|IQu7dNEc;oV&(6Ao|2<)`~ zt|ivqvqLWD0Ag2&DygECsyuPJQMMNc;fA~-G7}mMa?0gmab)8Xy5-v*OT(APnB;Sl=$oY-CTX* zakt-?7pi1#-RpxwGpfFv$Z*_au(Z4p5=wrv9(3dHk;@Rt?DuNmBp-?6GyIdi;dUq4 ze#BY@q)uXx4(w^8f#c15&5{f$@@zKi z$dem@=3S6EbWVuCK0eMJP0W6d$eeFiknb(|*JL*$je+|~8T{nHw3j9+D(`Z;_YE_V z338>|wG4XbmZ<%-4DzT;r#ov_JI7915sSr%UHVF#-s4)4J;=sajU|1Uec(3-;fOT^ z$I)k<49g9s@gIBr0H0E1o*EN%G_khc+9A|PCo{QRODO&wpcMhPp0>0nHD6v-HPZn27o*KKW1nhtO`Rc!qRb+!n=++%>&?5i{~ z9w{sI+dx`t3HH&f+LLO;V=Sp=Nt>4+fy&61lfjoRKBc&CAmIR4-Pc%sIKv1oK!7)P zoHwYz6eY2LncCmwth9&Y#~%X2*m~HZu%9=Ts~*r|TmLCg79x*APSNJbJ>#Yf6W^uy z&R|^8nAm2~VENU)JfYYrSdIdUZa^8!bl$%tf!1mxNWlval$n0$$rAn+XUPz|A!H}x zU&2r){ltr65&bZV3M5Z{e6HJ#O?I0)%hg)0Kl@~jbONjEzpm9#PSnp~XPvvqn*dbq zJv|M~gjaI7#xh>64@LN2!6ENEa_;xhD>!+7_H306c3N^7p%_@wsGg*(k1E6@6;g;q zZ;mrUf-f+Gx^M>Vse=H5vdf9P|8%1@>=>*vEF`teZzo4oMObUW+a}UngZ4j^L(m5w zp&JRM2XM`$$+1Ki+F~3OlWi;j4h1fM7Zmn~GeMVwNe&`>fdh$ypGMSHQLOiE#h+8jLk-fc!F!mFobwA_;3a&Mm zEaMxQST*3zZV1TD;KZ^e!Shpte8TrM>;thVEJaK6kh&D%0UYC|wlJNwX9!q8+<)c9 zIdFgYlBwW5RU2o~fg9Y>w34F9G1pKNUTIO-&(>CG=g~QR;avG8Zd|p*B07pQ$zX$qU z5)F2zaR~c_8igb#&UW>Q-Eo1c0oP$>8i>66IS&4Wv|?T%s1@TU#1!sN;?bGMmt=7w zLbZT=rc^jb#?kqE#DZoe4eu&N}kx=E$`=L=4yFWjK2ScEH@Er$w#N!YLj94p<^%0@NTO;im@6sF@4Nx>{Uh*VOC z%|8AQJfDNl#xlF>seC~K-f{aqF@1T=M;}=nb(M@hHX+z(IzhP~It0ULn+7y;fui8jhuVbS$KucmA1yoA~ z<3W9TA)&er>(E1gUqg&>H)!`bk0+Msy`I(m35&(VD!+0k6M2tM1PHOfcfZMds`F^?nw~B79^`S>^ zoK1OnJAb+wru5y`JQwb?>J;zyxA#0SQ1f@)_X&}pNVoPr_{!J3F}p}zYA#k;z;#WlP@wI(=k{?JpiFYI6u0rMO0AetnRAx* zzV~NBt_k3VKLE)M7y3F+jSPaV{?A01pyUxkXrGQ)--P+CP$c~P>lcLM&xZNP)x0D6 zqnrWoy!#ONq4&l2m(<@DLi3V4r(u@6&?f(WNCN+H3WR@dU6JmJ;i$**_y=kkvZlz? z6N<%2?+vUs26c6erPHu$;Bj*1MbPJGBB>`pu)blc&me(qsMEog9L4aEhF^=Y4L8AwHxGpcD`|cZ9PmD|#cn zx=8~f8+J<2%3?u|N#h+Kw6ESJ2oa6n!f<`Q-5U3nLyd2iHTiAyD$j@F!KX|gNOP*D zYy|e9L|JYv^EN}c+Je?%R^+v-JRlOP09Pu?pOG>4XdqJ#|3olFrJ=cjO`2#fBaDh_ zsRH>dvKR5mY}6`y{A>jfmpWT_n8DmIpio`48WD)HjdfEy_X<6At62-F!M;*1(Wr4Zgp9()@x7BJaDL*n2L%m=fvpM|l8tIFSA(JpPDizk+edoyH*wkq35rao<{bqmg(Dc{+Hk6JCFcAlzUdfwz_67@oUWBqtOc zJupC*VNL}v=m|%m8nnNK#0+-ZD^Wkm!hzu6GM-arNn5^&l>YdAZJ`iSg&~$`YtiDWd>Z5a!mI>6Qpw01~y2*_Mu0 zj(OLEVgN`T1!tt92rT`5j{apM-_drW_#w;nVzmWh-4m`Bu0`wh-)^q&Zjx28auKg5 zr184OTw~kE1_>2TKxj42T2>+_iwMjReALCGEdR5;d1PN++)t%h1r0hRZU@Rjjy!A+ zx2YKd626m?w+Z6_Q5OuIDca%f5heKD*tvNDvJHra2!narIN#=uGo3zfMfRpIFSSe7 zv-Io3micq8f)-OFNI2iQoVe0XaQ;d~1$aD;iJ+oLS+?LHM3?fOFUL7YZ-)4`wvlN& zJsl~ks~x1HDrPU+mW~1#vAF_vFj2iNN>9W5TeQ>RHj`U-~1QH{qj5i>fLU@n|qDu7s|^psLHYcUKdsq@i36Cc9#i*Wj< zJye+UufL94&Jrvxe%$f(wH=RmUl9dIJ7UWsKugF0ZbCrPy14?H6NQ!=iJP-RPPN-! zkB1bhguy3ZsX%6Mjn^U4k*<p~?akM3~ZWxFL*c@9@om~s_v zDuK)lr%(Be$$5?pZS?f)^OJ`zK2hV;p{g#3!Muo9zd_@sI@xA&feyc9Q_hd)N!45I z?*Cn{9>?dGi`cQmFy1#%g(T{mx{G?TK2!%z)PCcEJZX7!`12Cgj7M!Z`lM|LEElzH z9aAqSe~Pnx+D5;d**3bsCOQ%$&5dhl6ugf@)rz&_eZoodN0oSFF|mK1*SNyu)Vr>K zg*ZQF*=`kJ?8l_^oRgQb?(aF3knH{s{HBgNK&H5}q$@2Q{w>Fyhd-5L<1<1O+c6}O zW-Ajr9Drzyb?yo78^_@7)8+=GV7u)YB(&XV_9*!Cgyto1=-@Vhdj2Ih_59ouIK&&ZQQuEv0}8RB5X!3Lo+b{reebD8^_`)Oqx`u+9jBSpj`4iuKlaM|A297y~c1>h5mV+`H^qE=V-`W+1wIH|@%khlI6vhOpj%*WnNumh zOYfO)%s5HVkPk?%;p`1Y&7PRPC<^yKz4xA-RT*L&8qZy>j+y)Eu~$DWjCtlcLKH8! z!-fAQR>G40cl@VEomOItz@+)y_R=0?PiAV)ut}njt{I4~Suye}jd8;HpRsla)D7B! zijhs#RHw_Q^Y@V1SLNw2-Tsx18lkIa4@|=;`iT;LEeT4g3Y|oN7OxUE%)mg$1=Zr@ zFv2}wnYg-!VeLM>rVsAiDxuJl_jrjm zt`qx?>$D=NiBo_nK1;vr3I0iEmZZz$wciwCLfq&tH{6#(j@7UrEV;L z_vS$TuK%}^qlS%$hR8&Mjd=G4IVGm2)_MWH6CmS`1I1Yw>Z;wzGFMI2 zw#OZUY4(_XzAW)MtT?s&F+Jlk5IH$KFtOJTV&^y}9yqu*F&+SqC0XjwPJEX1puqap z@L3kN;HIx-FP>c&U$7n0`IodZ1fA}{6#(wO+aHAH&icy zfd(5uDU!)$#<_SyS@tR1$lzo!X`65wcl~TP-i@eJvb}(gk*31DC_FG~zW;ct;Ic$t zt#$wTm_*n_riJoR^~F+{P(y=OFUG^oL(R?x`6-dfBeGgx|(L(9OCrX z5qc5+I=K3j9dU}@$E8Zl`39bPsWOuh3eD=sSSPL)1v<7d*}np&o3Eq3&&yS8J2+uh zmGDE{KTauWhtgn^=ff4cAJufb@H(}LDajUTw+d6y(;%Sr8x1^L zI3!?6DW)9%IIaty8)p7w8xF;yh@?ooshWDn%Bq8TOGW?jV$}#PeWnfKT z;BjOY9G1jEcU4ChL()7@NNe%?#5UppQAWpsFdnGPzhx;z3Ugp{j>b6kAX0_9`Dy`C z@(Xo=##==KN|!V=ItDS3L48hT61ihHLPvdHXN8x!Z$1f1`WISb2>oV7g&6L<<8p*9?r(7s7G80 zff>t|0cGFR9+lk~Nmflm4)F@=8}Z=MM<$>J0-&Jy51ZJzhA3ANq5IPJtdX_m7dM%iG*n-vrWehFV1or?) z=PjoAnN<;0ac={s6=C0@fw-7ig-d_UIdt4a%6Xc)@qE6uR=B~zLRxhu{Eu+hfB*AD z5beEpifhGHuuY(I+PBlUkvoz*{UU8U{E)xPyEM0`+i2^|LopYHOIz1(`qn|z0E4>u#N}T+DULa!7Qr;h6UBue}oW1%*nH6%A-uo7`hhMaPxl}AH-DK>s{R^ zr2z#O15)f2Wuy_?^6?u`&bD^%P9-J@>y0w<8)({YTr(Dh5=RIRg5Q5_5>gTXkg{(nV|4($!HXMV$wzyo2AqsZ*S)z!U5&}TZF>_yP zD0O;jNH+aul`CgQK`4VM^iM8Bxm4J_yF#L-RvYdAl>V${D9-W}eDe;ZWNIx3aV=q9 zAv>kj5FG<)$d{&)2Ieb&OCZK@iy8#K#Wjy{IYFy`4Y|IySL{*9>=jmhh`dIFFt_2p z-X%G4p)5{dg^*Ssp96BtNYSfkRNmo=87KRPS^{EE47xdnS68OnWP}G(bua>2k@V5p zYBDZJ$k5H!N?d4kCnf}||C}+oO`q|MvX5_OviT4mZ5pAS?=!P=vD8VJ%jad&6GaFY zsz7D4Hlr>ns3|qmo3cI>W^n=5P3t14zs8OOG<0ieuC+v$w>uasFO3?`t8*cX0>1Fl zLlbs=RoSahyr$x$(Irhuf~bk~-IQ_I?s=ZS9J6P&Z>Obx_(7(;&M)Cez5VVU;i)Qa ze5WC9@bIS8T}r)pm_c8VIH1QXIVTS*n6@%{r}kM?w(Yu!e2Zay)&Y#CtHX42ry2UZ zb+N|}S6{56?`VR2fjprF1?!QZ;N0WouyxQDPeH|cGR)P!yyk|tXd*ChDLauvN8t4{ z!3@PUb#5>@q5W9-+1jXEIq}S>?md+|m|d}!Xx!y=*t>h@WcG074OGl#V8su=dKlOY zkRsd(Kq~^GX-H=@!<38=+f{KjU42qjDMW`cmoR(jkFfN&qB^b|IoYVhwJ0prOgIq= z<+9pOlbIzA^9492r5|V`f}T=J)9o)>t`Ev@80zB3jE;=F=^ zQK3F}K@~qq`F&_Lm{!~5f}q3q?BSYgj~G$aEzle8FSi1ygZp62!y##>t%C*|U_2tXk4G#BSItOtEOfktNvYn{^20 zxZ<4zh)ut2gL}aSyN8sSI}M&`a&CF4AqoBzrt}D!!&^A^s^g673ALoB&Uebo*U}ty z@%s}kr^Hy_i>SeEd8jx~DRzyQ2rRRoVVR_4=JjFD3L z(KC}U>?(PV!HV51GzpV_YGAaqe8t$AONbm1)Xehrgi1TtGs|~721y=kSwr47{9YzM zk%l(RqYLJXMZwcFk;iwNo&lXn*+;w?&Vr2FcFT^YLaZf|lp4yUrU%33uRD_B0LwG) z-V9SY2V|L(2;Fk6Sh}+4!`4))Z|sOpC-JWh6DYh7s-AJUo2kq!sg7hp&@GzIz3Y04 zEf6_0flL{`@?8pQMCtqg6k)!Tn(n#ItzvAc?s~n7lUEYpK-vC_Rqmw4%FcR3?|Mut zMzv_ir5+jcE6{Yqo_-PAa|f~$lTbgSUdU{xA}a+9?17X8h@$P@o^TnV9e5lfR;RR~aY$!E}e=LY|Ty+O}V=(vlJ)c)PHo zYrQqEoedIlh%#vB1n5Q60~-zQQ+Or>Qaia*6fsHE&9UEobUPc<-xF70;#>-%DQUnzU@9$B1J;b(mYZ>Rzo_aE27JN;}}G zB`&&r<&M);yF=mNG!$g}Tih(*N!p5Ii|_^zfVZ`yU$Cp56-i5M@vP$5Z+G ztxizOD&9RO9tW{NX=nQY2d_ji+X&W+GY8y2@~XLOFs~Q80Am=;GW(DAI`XN+`FtCC zS+U~$RlhqX8H^g+L`Kd7n6Rn{bz>sC3AMry$@4Yr7n@31wK3=20#!PHwoR3T&9ocG z1%xC?_HnVlNmFVm&qC?uy_c3R>Ed0|WsC-@5}c7wD>j2O7V@tlH(DTZ%ZGc-QzwEv zLQkiv^86JFOv5O$dHd8%YYW4VJhh*eKHVdkEg(}?Alu$@BbF%WM;d+|B;mn^q+<*) z?*jXCLtX)C6jQjIU=GW4MGbj3xRvU{a_FWTP)CYlbVb-f>-Eiu_m)R~+?bOSQ#bhz ziVOG4(4H=a0oCda%PXY;|2AvSfq-@eEq(oU6sgDUURJGBtt6U8rEAC>q@NIpgV1R- zYyU1(6Y7QGp!vungF6$}&bp}qv!oE+K<)sr!h{iJhXnRR=&as_ZY8~Y zP88X?B0MWG+4BjXe>mkFpY8Zs?nY}t3kCV$VEXw$^o^>Me{XK~vA_!^VLP#RXW$+BduxyM zum&Y-B&Uz=PJ^{Eg4_9X8xKsI+uCcI22D~Orw7Yg+-|OCFyxFNG9R%Qa9Mow6(LL~ zIP*GK7)ZcBM3k-!GyI(48qz8D3Xf&^WoTHDNYpOp8{;&#>WFl{(k-h(w;zf;97yWz z{(n3ZgQU1Q&8-vd#khoz&toTz(!q%MsH4)z)KXwJRF*T8?dw=d@#?TqNeQ6k%jUh43~!>S z-xj)dqp4D5w9Kf=)MV&=Mex*;zEWnW?`aSoM6ua;T9`9K?3`o4!#Sl0YB~>SVxIu9 zNZ`cU->v;3_9|WcgsmZFalxzo2~8i4@#wS6ZhcZEstusOFd;eCD;TD_tkMng=K}Ya zVrNfmF5c?q!{J&qtL>bO;v0VHKm-3{1vrne| zL2jyhz|xaRrmpkzk?C5mZo_Nar>8%Y{QyzQcfq!+(RFuMR}-P0()@CtL+95VGss*< z@y9y*lQr!aM+eWBaZe??kLNt#Hx(}gzalv4C28|#UUd<-WZk6048oZNp_%+)el*6= zQN$oN-YV126_YuFUgJdFLtGh~Tz1C}Ay0St+)~6EMKnfUfezDz?<5Bykn<$OnDZUP z1sL0vpc_9j<%Bm<2JtMWWKaw2p$2;4ahFYDxPld&ZHS8V#o%a%LV^7qcaeGt{2}X!z5w4zeAp4LxioQ|CiilynNY3;VOav#33U z;h`~QIH6ppDG}|Ks)3%mFLxs(?Nhd4pwGMaRbMH(nLG)W7YhW21`ymec}?N!^ok+O zSn|MdIO#K)gbbzsUtw#Joo;e46~tXoPrt>^T0#foMIz+ewWsU#4YfaX;l{~&lRQd8 zZS7XYAMIIvH7%e662uFa#&a` z9TUtkh}t*=y$55sM5XTwSunA95SuH%*xL-qv!qy@*iZYnMrs=zPOR7@)5V3fgi4Vy z-Qd9P(g0~|VOfX9w27)cjOQqf@SLu=rv^T^$C4I?3f5e>`@%aXf%UHZEm3EArRn5- z@7Awjh_>cl@wxEfPP$V^_f}SR1FSU0CqoHcw=$6lBQ2C#4 zbK!hK&pzZ)l}1lEW~@Y`Zqir&#dAST%WRQZD)}%$5+J{3Z*71w_mVp8rhbI2-H1W> zA_r5Vuxmanlo>nLstLpvxn+r5)V&~qyTH-da-87{O$y=d$fcB`o?ZbgI3R2*i&1+` z8l9)+r~lJ>$zK~bpp*NeD>4#rwf6uth@N0H5te-x(>a4qskaR)0f^L` zdOKz_T<1b3DNuV=`rF!6Y|>t?`Q`fwgNIp63uxN8v{}-s z^0~Tdu1lJ1elk+CG6`Sw*Zy12$*5ui8TeIHH+Pm#iFh=qyCg;S)hv`TZ!OG{T-`Ov z$u~qyw&6AeAU@bYL9g*3sfK2jc46m}JJaR6=%abqn4>dDT$BsfYeZWd6SzJ*(>O?& zem@JBpE9+8`eYbDF=%^5nDxW{MOS*gjlY&{q7lC*o?YK$aX~qme1_V%#S$;?xN4{s z<*k_HbB$SN+>O{H1Wy}0-8IbKAaFOH;!Vu*akjiFio9zCgP)N|a_h0PDLDa^WqA+7 zu!P5(z4@q}0l;55D{&|v1RrcTy&ak&h-gqfcnBfAm6{?-0R7-RCIl%7MTN7yUipM& zW?1Rp}$;EHHqY`Afu%cTU=z+OQMMaZTdzApv4E5FPz&bL3 zC;3{1P#x)~nM5H?BQ1DTzukZM6$^-OH!;GXen{v^{IN06e<|S#c`plJVLRm@NQ!%0 z*(m$;DmaNCPXf7axlv`3yE&Exbf3#X;Yu*|s8@QKTs?8MCtTcQNjft>w?qZew|T9O zu{J$~e4_q#!M`&f09<;PL?+FK7IA#>R=u(&bGm#UmC1<1Amls=Ma+jSyOTIUsb&%( zMS+0Ttr^|E4F5;{ny*mG3gP2XRYttn<|H;WF`+Ks@NSkh0B5a==JQ#XVrvtGTUf>3 zNEF!m910}Uv#y^wO*Nb4K_; z8zV?ZlY1(*EB;HCC%*r79Ur^tl8&nt4WVvf>Jde;RVvz^2OjEBW7gQ$1> z%6>`;ob0HCeQ;qkYg&AR`SQKH6rJ;QsXpRr-#bbUcK09JZ&}`v0daUbqf>ZN)ivK49XeCX;Y}p0} zNRme7-->J?fesO%BhNySi1$~NE*AZu*mK_n2~Gr(a^Qv7>WPPv*p(eidj9Tu7X z+zS<8ASruWAT}bERaGycmMxUmRbWk^4A*t3bA+!O>v3+(L`t=xETEDh_FDcrGR970 zj^P{UBA;P?!0yNvgmda?7!`ImkjrFY)spOp2G=mOq87imO+@F$_5i5WLYDnd#jZII zbETdpo}E?>PS;<-TokXu#)Fmk&1tl*!T1U0+B z-z7WsRU$+J7Ck%>4fMhLQiXUlxJPTmw=kL_gB8>g9b2=L$l?6 zWmYcVX7RBT<#ec-Oi4M;zzO0amNUypkS0w_TIV@#&?gVzIMZ`rn{jcj=YoJolas7BRTzn^3}RNN%g)qFe6Z9)_UFUf?<((5wlNxd#br7G#*vCj__Avv zs)b-)bv5Q%NMnmyhM|RR61V{evcZAfxMw=mpMh5WTa0I54LyBIqhh7PKe#o@^@&-p zc9C+o_m%_%E_f2xFTCKqIgV?=eoY31^Tz()AQH)*k-41154Iq*>67SIe3YNF8ql6b za|d#9WP{2%=C!4LZCPd;RLjp7gaa0@DNN18~w|7+V(R%I0am$?;K{mX*B z%0zAtP(E5JW~|3SBniC@^NaeH{@WSrW`U-TBpL{vxqtgx~RT%=-CwG3fh<9o& zzL?i5xe>`U^m$4$m>X$2E~abV^`mNI5?kQv_j<#u%w2c*1hGLY2eHCN!?C}3j)Hm( zEe6t^^%tXV-$=jxhlUV;#HKcTUYUe89div}1s>p+m^2@RPYY3+p$qye)G!RGQ~U9_ zUnw+25Fig+hBaZHUhh*z>@uoghZNNG^JkXtk1X^sRHHOv3Nw+mcIVH+kphGIFqAxFTy`mIhOyW=#km8E>vNCH%pI&!--XvMFzi zIo~Y`d?|Xc?&6Z*@UzZoOwRR^i1vGN?63lUm&Oxsu4Yw0^KLKECV*#&ZBLl{vbTPG zt1SrFbZ1KB@h?c*!7R4t{Y2aVP(rT)6eSFSW6@ANjp7LJMy)6LIu3=towF-NAjq_b zy9^jHdi4F%OslIOQRfH{B6lF--CovGnI{30NnOhGg?|^aLi1wYLoxVmS}`0C8da}O z*mvBHgVHw?&j`V7vMmH#N6+mAaCh(I{s9%y5cj**Qm;)B*OuKCu@1-3Xoc%V;kZtd z`OhSFo$3T_{@VZ15}Az+L?KXZumd){il2uB?x;y6B7YhEO-Z}#x&6k&Bw2*1yQfwa z;8H+|^+!iCBmMp3`2O4n^H|`ilN79`x4q*1o)9=6Eq5%pikffd{%6al;hx*y^UInm zNs`{V3RDZIIqpsZu!N(-s&&&0s_DZvSob9uYq6kGD6uTXDWb3Mvd67+_H2Ha#iqv^ zO+d+oz4?_6Uw!0GBD5WbWW2`Tsw#b?!|bdTkA}4_S|MwZsFw-R#1oN}Cm{o&9_eiq zoedd{kcC~g0Zfy4kvJ1xffVC|C!zCtZEd}z2w8wCBcl!UH^R+%Wtoom?77OJ{X-{; zequIQ1e~fF^<_911VcOjN6EJ=Ix>(7HxFY^LrEmO5Kdw9Y=^ug!i_7EHe&cK;v$%v=CD0gf=|TT zBvOQ4t?)gBKqiKXMrhjOHaB-;x5S+o{nNAO1q0p z?J=@pa}X({c&8$^r$QWT$E=bRDt``>6R>#PF&{G0Iy(mx$F!UK@ziadeLxQ_mDmR4 zZ-+rusip-N*x*3chi}7RleHc|t&j65k;B5TRa0+#mZbRR!3UEc5SHyLxo3^;L3%z+ zUtCaCNRi-F^gw8bq@hcw6V2Ci{^p5N*del{wKnDpP`(i7C^L0mQR(sz#ecq;bT1M*|7!i+rK- zXv#-ZxkJy2!tw2M>=NPL!$v)jK-bHf4XZWS0E>CND;T)DlLxYQHo2fNmIFN2t{-)D zma{_CXR#XJ*9`dna*G5cud?+YO7K}G25s-4>T|xb^0Ka%SvzgvoNyz?`G*{P6iPIb zF<>O$kyaM<>n`N(TO)6j*tN9D7JG+Oq24OOsY3O~($z$p&L#z={Pk8iUse2Lh|#GG zy7_?@T<}2kTVB!C9LV`%#s4;I4ek+h0=T~%nS*XxVmwM56C+-O7to2buc#WB7zx5Y z%&1t)vFfr`V0Euud9zw`OzKonuRO8h9e7r% znl_m&vt?WA6;PUgv!KK+XO@|!!cj0}%<-j)oX~X^+1P6^A{-5#N$Gn*8(EdDjvarJF?%BfP@~SkYYp{M)9S=lfP7L#(F} zFlQI!*4$9Ne=N#xdwlRR7G&6mdG=U@Ee!)RKx3BeWL5*kgl;Y*+tU4TrNp}#-wQv1 zLgdiO(zR)Ce$a4syBN$r>rFM5>SKvf=21EY`M_GpW#UY#0paC?A~SX7>T+mWTfRzf zsUc2rDGQsJ)BLu_m#VYUqs?H*R^3Bj zlkQo9{o8;rYPB4!s~O)xoU;;BeFZuiHKiMsg0jX9+(>jEb@xxx*)l)T$7$R~xoO); zTeg=%TI#)+u|(d))`HCBmah6|#2zgP%S`g1Z@s$Z8Nq&h#$Dhr##kq&t*b;d6SoS@ zoiamayIQnJ0-rMl4C5}RT%c9Z#D(Y*w_Wk!5~YhLsM@ky#7JQs#n3ZUm+J*#$}W`d_`D6lgvr+x0?1zaM%lXJ!`?x-S7By z9ETK6>Fo!CEZKAHP6~<7LS8heIAMa%e}BL!mX(V6Mn1;wMh!R^H2|{*Rz~CF(&Jak&FZ;(P@( zA~NNN4}aHoquZp2qDgyc5HPcP-2Pq#iXD?$2L+F2H7HmTh}y1}w>hNkHWR0RWGP5f(q9g?BXPV*No?Y;$Q-U2F7)lJ zkeHRhtx`>C81533@n&ISX|U!9g<_>$N1H+0&d02M_7wRSJ8dm0 zvgj&H`?~Ps@P$S76zcCX`jmmrhAKp?GZ=DAWD=Sr`kZ5mqH--g%5KO#8B`~%jc*%R zEetH0QBEG{ya!ZU7RKcqyRn-lym>h{1HqTo6%Hj@89Z^xj#cnukF|J4wXu`EWyjoZ zLBe`-u!L;abs8&dTDCc3>i(!S`PSTega_%`LmDfdY_YqR%3)*ZxgVE-sC{IYLe*QU zp$CpQdDn*Mht@T76@N_p5ffX{4{Kb-(T~*jZ4R~Jn}(RQ;<@*@a{UkI!dXkqVc3<3 z;rLSjLpU=X-?Ia|H2^+abJA?6_CR9PUxI8yX*sX+MsoIzns1=WVy?c1J%S<*CjO9B zQ2!1gV-B(u1C1>LbCVNgz5_s}Uf6ER%DerSa}iU-@H`7{*260MVf_1=xPF-Ym-c3I z_#(iR`sOt`7#!M73j+z_d%D8C?w1;^b(s96d(AL6>q&64Bo+obj_>k3PW%x``&P7v zagClceyBkb%{jYF%QPkY0j zCXH4@C~=tZVBB( z)EG)DAsBW#4!r&AYa7g(8Op<#NMfqny;=%_zNm7?wlO4-Capf6V`G8zfGcJemQwBj zHY&?!-#oyE_~wExZMx{MnQxjTUK!({p;LH7>ijJOejc4}iib`it^UxBW*!+k$6!8K zA%ThQ61&nY22< zuzriT(=B0#fk+{P2z&!LD3CpnB21wo<A7ntWn<8@lGkG?`aUI&xHq9%b z(;fG1W70|6+E7!kY>pf)M7M+>)wS^3q{WteSBx*Yj+`k$JK^?Jfb!QrY~bMe4ErU? zeA4iwRkr2F<({1H@Uicv{xMs_LIYS{dgI9XTsb^4Fe{zn0O8@zP`gpi5`Vpa0^NQz z42%2RPfloBn10b0AdZ|f zmS*lk8#UD8T-AA~xYCUrKQ8Ls9X79gUi#Rx@P76|tq|GO#GfBFRGQ){LSA6fL(ai@ zPhF2WDSBhC^R(#NA6}t#x~qyV-F>++G9y%)3On#~p1PFd3wsN6d8CWdy|DhF<}7yx z{jbSw=O9$><>2+8phwzG4UP+Lp1yJ&cdu!DbIIL-F8PLDv_!HFp)=bd1Jw;p3ebaX!8? ze8wxdyJ8-OIFr4>*$36#=51AnE~s+aLAVWfWgJH2!4{~;<**6$aG@BzeDt3ro!GPq zG87cNZj)*U27w(={s_ZkIot(=3gv6zXJ{##5px&kZ*t(qx-!tgY4F?-%h@3#rgKW_ zbUm2)RucBd=J6bXo~K5##%Y76ylV0LtZeD`3er`*{|NMx|2kcqQ2^23_o_xl0D3c)qoHM$U6&tRGwH%m#3yL1;EL2XcydO>l{x^eE_cJDj%)19X0W z0M^M|)C36;0@m&FRq~;2zsPP(h;#`?T!L(n>N?%Q)m}24`L<*v%Gbqabuc-KmU1F? z3?k8UB*MRo`&p&uN6nMPAUL7ROh}e|0BAx}dr<~a24Ly5xrrnZO z*NNv%2{bnd<2N+x2W4h#>00$kDa_X$2( zPXu?$ShCr|iwCw}MqNs|;rO7;X(}dc;msC`qe&q5KBwxU+%~K_RojH8$qg)e-+5k> zJaqq~Hm+1ZE=O7tM3RO2Os0%p*l#QHwa4#g4ATAA*LUBV`C{nfg|^al~#Oa;SLR-H9%+kRK2VwkItJ`mT{7= z@Mb-9c`YB_%x&!@P@gt|{*0vu5{YMo9e)q9j4ku#oA+-$P-KFq6n(5I2BdI)#%Ft1 zRCz%G7AJt5pIudfbI+~)Sg3QGCM51%O{7%#6B+vNj$cx6K}#f0KY(q2-)rs*|62LY=duxCz zZ|#O+IEQz)!#TdymD*(YoOMEH;?j5c+@TRWl;O67cdaT|8gb~2E~h}bqux{WR!U(!dsyU?Kw%13G(c%Nf&D-iUx8mtB+ z{iWr_+!)I)GL72MzQB10l!2>zIh&m-A&h z6XeirOO_`E8k3odxvHQ{HY{0x^nQAk6Yf7mm_r&vFz|MdS)I=-xr*U_F6Qcqu!{6R_Wh-*1++Mk0sVJ3{(Mgc8}j5TKD zTg0|j5z1!6lX{&!x6+=muiLKYm7#`C3j> z%Bvi5?!Y;|ot-WXe;9-=mI+Fd>V|xhi-BvP^`&-a$3z3rFoBN=w2s~%R$BunUmFSc z*p9x z9$=8*7?$!wR=6md<{G;uj)Q77rJIUkU7i4B$WfI+eDXYV={hqErmr0Sirj4zKzYB4 z%j8l%L5o%eveeO%(zO}t5*}t(Hq6cob4;op>-=Nb2VU7UlNhe^9c*uLbX)5b_^=;? zQTf+x=M?#3rCqUKA@4#0WwTSEV16D+b5gquN6J7`M0-NNJ`*~!I5=jxas}YR6RfvR zHB*JU!b^+}8g#+FYSJvjve39mlwKQDG*fhQ?Pax4z5QRGqiegFZsnt~9B1-1v?t(X z@9@ZCw&rf03br!2mH3f?h#EK&iDPqAiYt+&y|Y$gHdhan0(zfWH?d0lIkfg5??swG&lQS#S}c*mX{J|sI*2w- zrJ1}dl65%B30U6Uuizoww#b53C04=x1Jh&N+)K6!5oMUNN)k}ZZaf+gK*cr^!X}KF z-NDZ6NtGLryDsDMf%X|6?M;>L?Ioi|@kZ7Oww0Aj^P{fgcHPKc)T zTc~KI?PI;KF`mFXiOQ~e-#W(>{WS6tX$*J~+2GmPzIe4IUSY;53VNeDnrW#yx>R%u zva%0W)P`^v!QZfMr~}#Fb!}8Ih+D{3P*b?o^*y3qrT&u%Ns182hh`z$#z6+R601a@ z;^*1_^wh_s{U=p>=$XEZFuO_+DY_<|leVItBK*iAzxOvm-@)MAIH1x2y&M*v4Q99Q zC`-|1zE5-I?-d?S;bDFW+dc1&?7}y}bws^;09y=Zk*|z^F$~1|i=7aF^)~6$Ts_Sq0{?w(;5H z4n_YH_+$;lJaK=JnQH1TfhzEa#uU9oy7%~c+!NtP|ITy)r|!z2pvV8MS|;ec%ON1oXsXb{p9~agA3SI}l;#m?ZDh{y_R%G0 zn#!kOs39iTYP@w!q8W|3XuYYy2q~9&)XfG6fKk9moIc-`J_?Z+WEPyY@e#=7AO5+x zDF`%ua(Jit89R$ulx<~@W6A?s1 z>+9~Y+JdpR`xY#VgkYhJBzAe{0UJa5jQ<>9+)h3vt|YSdClV;Xc7-VqWX2zg3kSrC z{?n351aMhZxR=K`VNhiPU4=;wH+3#kO#6KpL5j)#x@qK>Q1ZozYG-Q0+-7R#oocV2q7c zSw&kVQF7O;3n=|(FE|Ap3Ew&bw`V4BbwfC^l-S&HNqVC=vN7Ywl_i;uy-7NKuf|Qa4@G%>ImxeAR1Mmo1{v-6p4Co~m_L z@CF}zXg;X+vRuKAxUt(r3{OHsK-ATgde4p+cBdFl^oBit#EEC9KqYFl0;K`frFp62 zn;9X`=d?iMNV?zSN^*h12t+Pz<{AxY|Ur%CI~JCCG3@|EeM6+`?knJ*fch#7_$rI#;$S4n{+ z5{c1z(S?-Ybw>{&+qvmF2C@G$A0;}@yR^<{A<%ZqG5q38uTTv%mnyyZD)^jJHz^8?SmVHF9e{}uio#MqhybHV2w*GwM=GkNz#VyxC9 z*&o@bVUicXLbyEYot-XAe*`a7(%<-=%j?1NpX6DYJzgp77xd^(U`xPhu_g#KZu+K-hTXELoL_z(o}J&7Rv=u)D^)VnoW44s+dO?S zRC%?9=e2Ds7W%0~{DDlvw$J^ZEWQ|LjRoZf@TlghHB4ZSKg{FkAnc5Re6VuvAsob% z^pO(QmOvbt4j!}gMV8+YP7VQ+Vw&9!qu_w%4!KFhDI~c#+WKQ@u zUfhQ0C9Qg~^$7p~@WG6LVnE4&5WCs~f9x5PtwTdtF6!MVQG?}jI$m-~-(0)^qV;o( zNW>AVLRDSfaje}(BIkj|=x>L%=rIck`3tXRVAqS0mPu&ue%cLprAh0a7kZ;`^4c*o zZo7k8mzwq1fqO?bg*UUS?5|^tk)&Ntc2G(W)sx@Q+m6>l^i+{kR3}Emm4I+Yiq7h$ zgR97*Ys~6!ib`jv#C)&pcA1foD!AnTpaT}lk)CpK1yc&P3#ahN^;&_8`R6C-D6k!r z`k~|hVh+Zkwc@SW>?tsze9#@K2dF4s1mZnSOI2OSQQQJMES=*A-9sb`Ht>lHNO4K{ zWv`!}hKP8cg1@MPW;nTH+Ct;KF!QUPn$Z#ihS>1;G}4U+OQmGfiJFQZ-MEB=sZZ?f zU5~2zXaqW(EPEawdF*)7N`(XKzCI{{8S#WDJLt(V7wOP}osuLd%m;1L6UV>3?E{(i ztM10j#5S8D5J8WtnON~lhqoO6*&TJed+OxQ+Uye`WE)TOR@`5aiQnNrK$shw)P;km zt4sSNe8-UawoGv%9!AEGu+Q9!;%7lK2~kGRT*^>W;2jE`P)BvHftFmWO!eJ~m}8g? zt+}6)#(|qKbof>c6-&}sHGr>%VASS$_l=d2ROR5Phs&d z0V(uJj_sHuWl0QJF%hCnv7HV06B_AWHb`O*G++1t2HJwE2^^*(EA<~4Z)T{DwuNev z#;yJtE~KOF$Jw07&6kta-Wtj%Xi@m!eeC)?`Lo`{p_R$Bc7rtNb*>MAINeFi11O4 z00z+wubm;;$`LYTCNpr4>M56UW1ykwOC zE{p`u<6~CvFlVUKbRBn^BF#(^Q<6f9uo5uzEPsWGt+!tQi0Leg)H-=*4OL2|<)ZW# zUuVK#YuLIG-AliTM((&}$V@^aV2ZzSk96@z+Mq^E1l7NPPN=DHmrh-FAlZJ`97VPx zE!_23fQor8GTzTQ*Dw9omxAN!6AWU+>33WSXU2h%vwlcvsytQyVf~#GLv!n0Ki&ql z^^Hoi1K>yB=5UYkkN%n-kWrp&;WYlVYhVAb*l8;q?+zL@-p(fcD#vwW5}&TR;7P;5 z54@ubIn`r-dHwS(D>7Lw;mI@juP&l;ZmJ$_{QB@}~zS6<#uV>$1lxvuylo6DkkAaDV=OOm& zA%W-}H`}o^EWXbf)}OTW%9{#pPUZx)9-Tz_^8+Z!or36riS3S=dx&sg6;`Z7AQGffMH6j7@94wV7W|3O`ZXE( z(R2Ehg_HDN3C1i=xH<8(gh!DByZXnVCf^+C11oWz?Tx-;Hv{lPj<7Gug}Eu1b09nA z60X&Tsa80cktV$obYBW~s&C%@gR!ev|BiUv0-i0w0u|3{~nCL6jN-e3F zD>@>5G7svRHQXfAOz8}#=%5+p?Q#M1qCM>B|5;AUKI{6-bvC3zlPOV?)EW87t)If1D$fBoyt_GZRPYpcKLk zrdR01{=$$)I`Ih7v1qsQ=-Af_0&g+>tBYCf%n4ra$S!OUkFaGF z^1bnYA}>i&TA1y=Bo>u{^DQ|jfCtHjB0H`%IAdg&YRL(-k&p{qp+>35{Q>1yUXOm? zqDw=2js)IjIykZe8NkeuQi2iXFyQf2CAlO`oE|9o^%g{LzdUq)5YZo#S-QK!kt7jb zjUw1wuq$6(Ik%tQ`6&+IZv<|k@Z0Jtw!KP}#?yr(IUaN13$ctOy9{!eYaXJlGWX@) zTB-u-nN{G4%EpJWX`^N^{v=a{9+ZNSHUQ`}W;2vrSwksdc?2X{?ec2j2-4yHx-ly+ zC3#fZ9CrsNALXpETyk7bGX|VS!LwpFM;QdEJo2H;sK@B-(v*^TNkoV5t9&{a?~Ue6 z&qYA$b(h(&wYn2iluNk93pP5>nW9DSia*X$TFCw8P*Y0q)3#G2yZ-z3l} zdC5MT2Qo|SXfnh?pmbK3dq8Z2Vonp4CtxC9I=f~$V5n!L1q{m1w&Q#dMLJh94@R;Vu^a#{Pz#b8rYX`hw8BbqkB59!Lgz* zR@u1&UNe01{@p@4F`N3BCk+LG_}$3Om+$t689Dt&6L+!B_Fa~3r2;WVCxa#@nz4Ao zf{jhPxoV}z+sPa#Cr-*6L9}hZ_U}l{nqKxwa-s7cPbQJ9Bo_2uM%Z)spLQ0zdsQ}m z%(x%;SuO?=O>uy|p zk;S_zYkdtnBUSeFFqDHfqeg;&SJ6#-dA(k?A(47xGsso9mhX4q=m9pP0#xz8HlYOJ z2MNI8wSCf9d?5mo+N+a2Wq<1Oo+>v#z|a1p^g~IyxA45QfZtLRvjrJrHGGg*Gd*-6 z(&tlT1Ao=_kub^oaSWS4po@vmb^I+qfj}tXEK>F7ldVG99*GoBKcyP zAK2=gxKKoR)||ZrdP`Mpb;EHO0 z^jhdYzHy-wrV)yrDj47{xi~YL60(}anUbyuXoBHei<;UtHoL|h70C8AK1Qwv3r%@< zwMXajQoE`-TZ)CK9x!Iaf22eEtj~+Y)ve&A^hqJ`{21RcqIXXCdMOP(?%g~z&s9Z@ z^CCHcxLt^2vA-4}(}(?#_gcKNDx~SwyV!U57<%_0gKaZ2Qz$ za^;xgc;V%VnfeSPQHBcNj&-0VmI0bZ+2&V6j!OrStp=g~zdz-`x_9?8L1&6pbSd5NJsU2t= zB3R%_zn^Iwy}X-P%#DBRLt-LjYd3Eu%& z8*UUpjCyKg5Rb3ZY$K66WhK9M@lWT86>4&Y&^rO7Q$^6lr<1xJiz6Dl)qUL4;}%6? zSD}@R#TIgdrp%JwQ90WXqDxLFlHNA>VOG!?w6$e>d`jY4Ea83FX>R7f*P-5g_a zs>xYo@bTe)-iNNGz;|4)m7)I+-A&td@Opw#KoV&qkp}8bWwQf{B?9aU=h|<^#!c%; zs{|xK9oiI{m~I6XBe6+-KyeDs#*bz`pw6vak0y@ZL46(+6|QuwwpsN?QLHb`eV7+j zR5M6KoQ!ykV}-r<9k|zy4T!MbHN*mPu3`x+GRzX^s4iNU^Y!UP}F60Vyf(Kvx zr%}Hxj7QU1Uy=|Y9A#!f*7v|XEs_5s7d$ocS;`26#y!CU-hJ(NFRI4}+!dlIXVQ-= zA9nZtmO~=OG|9O~<2`R#vMK!8!Dz1Xl}-Tw`Rnaa58>8in;Ia{)Ve;Le**%yeRbmsN$>7Tymn1@Qv!vXNS3vj`;wX1r<2E!GKjog{Q)9#=z zP(Hn{C32};4JU^j2U&lyZ~H5EVVw*Jg* zpch0*8G7W)4pY{fdwHVH1rG?_lBs@62sFH3l{#ZGd#S3kR|5L5)Ot<5;nu&T@XKd@ zld(x*RPMc;-;5f){VO_wF*n_;kLCDgQtu$KI$xzGH7;UL2P7S!$vF?T=Fki7TYP{g zmO~}*w>XNPE2Y$*Cy!fb8B?tqlv zP*>YAn&ou}n%uiS&v#wWk=grW>6HlAtb~qmLWsC{%@^;XFZ*R#RF8OSgS`$OuFx4k zF40$j=&`C-AMX>)h|+FS!5cxmOr}{-lGG#QaC$KGyK%t6!D|nsAO;Y~-$ep0yazFq z*r-JBD#6wFTaP0eR!L;P4jANB$@nOvDtQpclS=0kim`og?qS3CXY!$QMxJvzUr2WbE zVJw}9h0sgQ{K|_RTnW@3oYD7Rel9Z|{29qF@O>u`No2k!0)3o@q`y-+W#pW69AsDy zQd{G{G^`sAXR#T*Z0~QVQ;dW?m6-{bQjNMVcW=m2RK=Ts=wP&`#(U#AiRGv2bMwR~ z7mlfix#jr5K6~;H;55$)IYK-dlplhk#@Ri!Ot|nosw-~pt%O%GhaWuu?H!W7KG598 zQ%E+HVQv&a%H_Y)hSFR%3#qqLEHwW|q7Elko$Z)*#Of*)@3?p>sZT@6>%bWj@1T;7 z>zG`s>|Aim6C-jnkR3ckxRbyWuoE%)t@nxdiyEU>IV=U*;KS9xi3@pR$fAnHGO$&= zo%<#`?fPq-R5 zhEWU{=3?;R6@+N?1{R-D4-%IlLS3rx0^9sjopk?x@{KmOF0H|p_*+-0Cl+3mV|S1I z&A-TeyA6^;Unn%lJGX72&>}!nUl>*!%zNFNV~Kp|2!9e2Z3-A_PWs@*`A2QlQhmtH zcH8>0%s3`It!Fy&^Av)XAz3OjK{kVDbjd-HoAh~^b-i@phCPrFm?z2d()D|`J-p4t4f%4>dCO%E(YC7XSV|_=?hcJ4h1+dJ zWu8*1C)amkD`mD%Ia1N9z1r)b2eQ0hidVC>We%+MgJ+1G<16I^>6V%wIR&_*s1kRg z*7K2}hX;go5(dkY4bJ{O;!HhAlVR2x*3!AGu# zgxBdA){voJbHvaPmi61;-0IsK5kSzig1 zcK@-e?mMJfo>aL-C22=Z6;p$8cd-#hVij(8g}YjwWuvc%Ab_q#WkO3f)zk)<(|WR+ z10wJCn+U1ygUij-zzezwIk0WcO%d;64kolwt|gzsAQL0vk=7OrO4gg#u0h32a~j;v z>b+Wpz$-2?abD(^Xo?O?8f+5GSk%qYa|O!6_=q1i{Ln^gk*JHFBT9{RjElU)ar0f$ zFZXjRXxd-g*`{KQ%c35!Ve9>QKv%mBoWD(`;VJi8tyGQctiZf~jKuPA#0}gvt6wVz zS8%zn(hnS+Q97yuCWXTKxa>rYFh%=K{-Gn1%Ac5ygoVHR08n-B!Ax!rQ)nVIDcmB^ zw1&|nwr@b>+m2LN>kdL(9XIz=k=VmFAetPWS4ARkKs(GbU(oLg|K+4%9lMNd?|NQ1 z4UKz>KTaVKL6!$z_OZ`Mjy(9Di~}XH18!0~=VhS3Ia3F1Is38S^<3rB{+~OAS``3% zC>1tHJ2d7?lj3&55ef({q0)GIE4j`2{3Q&?u)#efaM?I$TWcZPWQ%5j5K8dX*gwjd z5~3@tstgrRc$vNLhCTq+(z7B=phV1<;m9g72VC{-Gz(uBPY(%eRpGgj2b9FZnI?BP z+vJ7&XAk(E5Ef|3HyWTG=8t@+FpHivWErYcqA9~HWyBNzzGi`YiXY)C*ok z-|a5p3FgS)e7gJ5ZjSg@ev^s^jm|D6KNj%0mHBoX)75oYV<%*AcEIB7BCodzo36Y> zsc{A9XV={T|Ca2{u5hhiD|3RM5%)so<@XIPi#xKB%Tx>|W_4S7e+1G%0?56pR*vz& z8dOzqPo)^}fcrL07Vh`6atKX@5-*r2g_W~B2onVB`~%QX98P&+`I6Gy7LfpeWbRCHr||@xV9(b#4hWsd z{}(7YLh3RZZ0Lez5$|p<+_?nmR*#d*n=~)s|3NfhyXS2e5BD~oXE=(|w5eDWhNnld z7=)neF6}OrCmYMBIpc#XMH1E!LeUX9dpH$4V3LS$XgFfbp%>(mUHbhWNa{FJzQMzY zSSt}6e3az3aFzAlVQiOgyvS%Uism%^ZW&c2A9-3Nu6 z96QGx-x$SNB-Zgo+sdqVKYW)9|H_+Vm&5GF6H3$qr9EXUxxg3ZG)f@RSQ`s6OnA4` z-dN&GjcmmM{OUv3y9j|)Q^E;}*-dJ-ZL6~j|NMLa6UXWLl`O1+3tau+0u3EgVh@cP*c7%lc?poW zXGiqLWk@^^PxwplR577rx~pg@ZaQ{28RB2>ccI9Nl)R4Etuz%oN0E@iwJ~*}t&mqj z8`}V3GQD!`%CIHh0vS|-<2lNeM}yZtpHXBwCca$w{QBPnSo?>|-;VmXWKYja(r zWWAq^^O1(<20$3nVSw6-eT4KA>p|T$vOr$ZW^t$;C9}Ec4#_>-(j#VmbxQx(TEFE` zw)>G%uC?`2sM*j9S|4}B(&{FiEYMMm`H7?pp7k+HX@VB>yHjr}5(Y@=$gtz4pVXQv?P*O&OP7qqi19oN8B9#`j{BMPv=5*MBCg5 zc{9Ry*X^F{tuIPU(oDL^U|o4`R&Vo_hMX+L4wYh(YAsjEnZ|y01u!bFHk)-y8ehW7 zTZ(dlaPzsp6zAoiC<4LGk1^jZ-}=RCzt%gRw2h|ENe`3pmW2Pqt9JW|b?EUF=j%Sb z%bbSkod(-q&Y%cz(i*Xe&m;oA0BSDvYPDw+-yKMH^pdVD%HzmezR+A3ICP)_t0+6f zZ=geb8#L6Yc3yWcDQ;bvljF(&L=asU1OObq&9_X|D63y)khp?bSAzOky~9M8SlwEh zHkkrpOZ&sYEqLb~mcMYs&H4k+`FxGLhZrzk0A%BJY6_K~Djfrv>WC3`LVUZZFp$C# zyEcFi-)*ws=<7gfgjWdS@jGHQtSTl`036C-&)o;->?b?Nw_QMK5!In=oVBXOFI*J$ z^jHPf5C5q8;bowui5xPA3tNqnsJg~05M56LNL`D3|9eq<>X2%zn!-LeRCryJWo&;I zEz4kzV`$M@lps_0MvSWz+^;UBevpqn<@7fHm>@KxIE)~l0$`_IZ%GB3zZ$=;t^R(HwN4zc`>HRU?NvuVirD;IEmqWk^@|3$llaFkvY4&Ig0wJ4 z7>FRL=hTo+(+r87cfhr})Kq$9y&5CDuj!$HR_p%b=?*s-pBdwe4;hH%?!9+I6{w5a zRwjIW{!BZ;x;7&QsDAeDY~r6}pXcj(?@L7^82VS0cVC0Z?^5b404oN+s_c_&!|#3V z&rWF`Tx1nvGjO#R@ZzLm6mO`uef=~Hqq>xk%&cjYmK`ZaI*|JVK`}$|T1YHAeP=Uh zPNI=zM9!Njl5xu9pwuS{53r{4L6RHb(-u%}v5{3&+j#_kUq75di=1KMGQ$pPGv_BU3Nc}*DsgsPQS|jGg@tpOZ*Sx z;p42&RY@aW;zCd60UU)^eVv%?+}2^Am$Rk{T6hzT<*7Rzi0fmk+SZThHq#-=IUL;B z&z$BXWIb5-nLbq!EyqKL9oGaUOc<%0-2;G#{Bl$dlz-a4hx(?;RfHF8KH9DY1WA(l z06KC0paypXx<8x}_Me#JeO2Lt94Q-}&E}_n5Ly)EM1vKtidRbcdyR+9+Ytg;sdz|hu@i?D2-2tJ~=pnLwX$})Vx z+@Cl|EajN=`6AHtb$N;ZXFIc|)H!^~(Mi_cj&i7q@UwI9>@49yMPcUW{2XSYc6Ge$ zs(tq}0Ox<$s9mQRlO8+73bz;deUt^IdAkVisl&1Yh_6!;LxeoKz6c z?}#8&YH_Kz?Z>5GucFAKcOCa6x7U~8)zJ4K)wT32EG849{`qm#G`yUmP6XZfTJ6(5 zBfu?;wJ8>7I3legvvv&M#xXA?6Z~0SzXy(R_?~m0S6o|QUTL#`WQ|8}cfSWc|5fBNtD8iq!_v@9kFTv8}`n zD;{v)!57NA?Dm8f^a?;ZFL#>{j#`*1`3>q=ero>>@=XqEQs{uMmNHJ+jorugpeQpF z{Tw%8EMOF-V#DyfxG%&!g6ViLqd3RDW#%i@B}a#g>RWf;m-YFzQ{RSP?Z&qyr z60^@iaw?3N4qQj{@gKFH;<+n3*n--gw!FocF$A{c;dSE~P*ssb->}UP?URcOTcK0I zdD(uSQ+_C34$4~K#Io^mi_=!4JuskW95qH)Dj_`vhc;GKp$K?{U1`C!PwZnROROX6 zDBDEB1nnG4w*KjI46xG>R26Ln)%;(3-zHTtqNeskW$6?mfFG9!_RMrGX+f~><{eX7 z-=a)OQ^bylGi;HjweV}MZc7wH&z=Gjq+rQSk$2im@LBU1$U8ZZoL|T-q;W7BRVMo> zd+?q>u7Gx9ltYq+m>$k0#6bzO6NrNDJlZ^s7CC2lpx{c7Q01Sj`M?ziBH*~aSj$4OYPm;=>VdEQz4?hMA_gla>MiYElhDeE?;bf;B-%!qslctpd*=-_ll4aV&#*HOH}h zF?FF4Vi*0#1!GqbplO`Flo)$zNW2Ep9V$tv>Lyf6tvYh zGadjdhCA23pXeYb+LYJXEZkP~xQ1`iskJKqZv zQ9}p%c=^(ruCsZVXZdnn@v^=-2q4UBYxaF2`uth9#e@lJokqoIp=)DyxjAKkT%vsF z>X&gEz|K|SEc&FKT{Ib63d~!;q8?=i*4OqZvMR{A%gcNnq8`IOTHz#d9#T|NGr2KC z*7}L{^jdw%aafUs5mF)jl0Xgb1A|VAI7i!|^xu|_Z-5;-P9gJg3L&ORQ#h(cSz>N8 z#ze3x9!wCDl7GXX#|^O>XjpgqujGuZiYnej^~d0_`idctnH7f4v}@Ns>w;prY;)Yx zhfOtL5Ofi|IKD*M702jy7n&=dx0-V` zr6J`K_B<*2H%X1CsF4uB*rXWUOj)BgT^YdTY^q0#zlu~u06;5;-^$X*grhui+Un!fWI zc!_Oee@!7)KKLET4fRj#h?jTUxp$5Y4i?Pcgy;grbqSrwe4Eh}nWX+P*}5^82sh8{ z{6)U?PQQM!WnX7mV3*#5gw#l?!MX?q+NS6@1FzxTF zXE-Wa$~#gv(|(nLNw3RcRz|fV2?)laiQ6}}Wq)7b1H{2KNeX>-uq%z}%hNO(%9BL? zVsCcwlDu#ZMrTTzP2S}vK-RGt&6LM)v_BehB`_qOoQ>n$M5iEpX$U*C--()rM%`Wq z{7(H{4tqIiZ-EAZe7+TtOR70&EoC5HShVTD3z^w8nQ*>b?%0}{8y6?I!$5t9Pq?b5 zR2UqnLcZDb#Ian|{qN*HOOKA*sLD+xkCQa6z_1(|X^wF+bL@XY)gw0qj|0c|8CG2ePl7h`6{o*&<;*-o^=Y_u2J|W5PFv z^+7N+JxIBbdlV!)I>Hvd?M^K=?9;MDb~ZZv`|FWVcVma798L#$UjQUE4_{mkr3 zyM~9QbwRigyH_8dk-g2R{UX$GLZJzt5}Hmpe*Ouy9SW%2dfyWRA*)1Xk8)LO{^|rS zW6fmNKncfwQq*)GWvWh<;bII&TEyxiYvztW4^_V{^{Ddv^4q2Es+)|XB;}wNJNv(x z078!1jHow7B9u{Q1tcB+EJu@mD{HZ9B35`bp0ikwh4>R9)!9e;L~0tYD$R#gEqk>A z`Nrf6;}xEugEfPI1F$;+ z>=%Lv0PGE%ewhv48u=wibf42oeHACy*g2)jukGJ6reHP!<*1SMN|9g5B`g`TV)~I} z)5-c5CHWz|)?u;oE-(*8%_v(L)r!=D?)_~@o;Do-TEPQXTj^UXWTfV2HOdyW``qu_ zF$7CVo3L{60EKwPYIGp7R0Q?;+-k_Bby2ndpx<@8)v8H95PqmiKzRO9eS*@3g8uq^6G^-Hb#qPQGnpc7CB5?v}>En)5mNKR^SRIaXB7X1zab zoq`Ece`Jc>S{T?@As$D5uQ~M&_{zGT+%EX(lGO`5*}TPyI2!c1)$$XVS|U>N zfosiUX(x^2b+J#<7Frn|08^uj+!X|Fp7Ii+yg}O2sF1ZP`!s&{-_>DG9;UxatL$02QBBBtnaV{g|JRNRSJw<(E-(st_r3 z79fKQqk4V^+{_8xS~7f`ec{mVKkH&n7PH|Q4;eLHCwhoeH@by+FJr?He-RMPql~m1 z4GO3gRkf!KRm6|w!q!v@fi}?=HJp)gV>TuTh-%Y$HA-<*W$&1S)E`JPGAKCm*w+mX zX$ihC15RkMN4)h@6Y9d0C~{HY?zT?u0lz5NSzsnrw`*33&padXesuVOTP+SXs)hSF zncQmw`CYt`9WCv@66e4ZjGb&s^U#p}Tx^iOa%Li5(mdfO&~)M(gg;+zHjIMbA5?h2 zLjN@Q8QFPe20Dxx#FMHBmCwpA3(*_@)PAbxu;R6UQs7mi!NR|2V|zd`w2s7DfBsC( zIwkrrBKjh@-EMNT6v$6VHadNP0F(A=39)Rs#{-IZB8pzl3oK{7UyEcXq zvrkxDVL(IEcI8dvClTv^4;1NjITsBXYE(8T)3L4?deuHDjTj(D_hpW7>_r&B)-yd( zkDfKpx9|IT{Mu)_XhnPRH!!)QI-qh@DYX;NG%wS#lvcN*$Q@f;9H(q9>jFE1+Lhs< zBHPjo2KXLC$MIkyleQF&r1a{H`AZx5U9>Ij0$vS5jopC&Sx+}V6=Z_|BszMGajkje zx$}Dir)?toUxrsgLZJ%R8-(g=eJnp_)Os|uE2lK@^)2H~hD{~S77L~n%OT58M6gR; zs}4z7B)`VgpU<}^JNTN>wFXlqYHVdnTi7XJ$1ewlY&1B|wlSb(-`Y1?d<8mBNk5AL z+AkkPqKbd?%Legbb>EPFPMIg#14a;Bz*)P=$X85Ucn*H+ZiK}4-+^3O-*bOTXK7E> zb-K(++vA~En$cuS_o4l-l|caQ=yc84u>u1Xj~zC9i?#YmPMbr`R(o$>1@EuIG<(z} zC1Jb;MgI<=NWb*T_3Om0cPKmmYnj<&IOs=mn@Mh&%qq=HqF0+wk2GMQ>2jxcYn?7T zSqYxHq{{JjR5$g4?8j`6jtoJQE={ae0gv(qge9RD#bJB-4F5iYz9!$4TbkAPljSW( zGRn;#s{GCzDJi9w#ij1ty=(y-te_d_gYo0? zYQ~uhe~$8{(5;&;KKt1o(hzlkYMF%+s1;_20uM0wJ#%7Ul7mpZuIHG%7aYB4n8X2} zqkgVq@^Gy>kg(iR^We$)wv+B(;a@e`B{Hvnbtz~jnw#Z$y<@+=CD6%-Eot>uIevzO zpzAodK54d+tE#;hbaMV=t!f#Z2r5QV2KKS;B!KVX7AR`(8?~U%k@Wn+YDhHeav13X zKg>Jv>~S@ZTu$dXq&65arVpyglgr5U>MuCU^l}$_=d{e*mav zVgOL`89!&P=xV3V(+V zV4i|OeH4d6k`D<9!UWCJ5vfIt+Va4cZ-wU)Wy!RxYwjm>tP{zO`a6UF0(1F-fTY;uQJ!?+i)t#K zRPA`-NY-c@XQg>q!f*un*K~07ele$sbMpf?0P!!|KK#03QR6PrK|g%?n<3h)1NSXL z)ZLuToYmL?E8(BVd>dziGX3F>ZruzkQ>VDl7L$|-_SDM3h{uBh+f^)dVj>&CI~d@2 zjFE|H5Tg~+X6wk{O04tq^JZjW{j_nguQHnki(_o3>R4~ImiAPDW{wdo$0l-JBt{cw z&b@gvum)&un*dT=V!BHqQx7-QZt}mGtt$}Y{JZ-oDbN{bn$)Iw+?ijujkni+sJ9&f zcOv7c4`PEjD?!}uDxSwKsy;R?V^>Uir?`vc-Z8UgK+D5t6JX8h)7x0mw|Rb@0hJ_x zf?LP$p=l+Fdf^she=pE5;;+ zXRXPJn*zyip0nj~le`V1GIjn~&Bxd3^stuT26lU9vcB4@( ztM>yQ*l@C-N?TsKC7gIPqAESAFArz{tCzK4uvxa|VO^L=3}IDFojeSE+TW7u-q_r9 z5b__)8&|j}3cacF(Q#1VaCW7akf!ivNrQeooe%8wVE1W5dQIj`#`OlI#-Iq=W1y@t zYrURJEJu)dQC12g({KqD1k6$lSE);+v@uuPY>0q7Yf~aRH zC+G}8FB@TUvQ2z6AoiFDsG=nNQn)ae4m$|eJK_>Vb0TaoBd%idatXOnKM+s01Czrl zh5D6pkx_NIrWdSxlTiD9%G~Y+`0k8I!?7BRY&@p33=ppa1l$U@sFfhlQ3ntDX;R8i zw#qVyY_!q_Z{Lv!i>3j1p0K%r)WwUUTH6PTK35xZ zgY6s>7bu?X`>|KQ$W->%?+no`r>`Y){ZF_>zx-}v^DxAMc6%!IQd#V8${q*zgiHjB!b-+6>GtXY~{ z2%|y3<$;JhP5ut8_wH6BF<$?$5q8Hk?L>oT2N=l3;nVNF9K8&+FlQgNOwFx!fN_5} z0Eo7a!dY|plGpOXYe;Rtu7CX#iHKnBvmFs+x|N0n-oO#6%k`BJ>f9@-=Tx-0{g723 zR;Zs!EzeyHcWO8PnEVr$Vdkq^p(T9U=z+if4}2N3NLev|&La(SFk+J`!B+g(v-mTZ zLWL7coXjRM!D-zAlYNc9KGw}kE=u@R$9t) z_4fcvK(xQkeK6t?3=)s<2VW0#_GOKR(44?}Cr^lRvcny3z|H|!z{sS5HQs9epl9C+ z7n@bl>4}wtHplzgGwI3fRYzv4S_BE>RTGblujmI=#7(E**oS`Hc6}zm?GvWRlu^O$ z7bl<+yEqrUcaydQqbX!9wJmi1I?SLS+>OyeJ{_s=NQ4PNvjfz!jMcB1rM#7gA`yy? z_B~V!mh+uM3ol25?2)n}l&}*3l^?6dEzOMdEz6i*oJ1_&VAq+-bTJ>+T2S=XYF>#` zBUMSu4~JS*k1T86*aK}yCqwq*tZANG;7nD_39E7{cFANr4BA|W62}}MAx9gPgaGhp; zf1*Jc%6>^e&GW~Kpl?qCU33Y8tP!3soV9J@mvoc_;o(tYa8~|rBs&UB`Cc9eBIN&oCH_*mtk)) zglP~AQ)_N6HpU^x4po3o940aaV~m5oDYTYCZ52ZE-Ps6?*O7OrrJC^rKb45m0Q1#M zBubZ6f?Rl*UC{Z}y0V?Ya4P#s6kh5q&rzCtJl0{R%;oPsmW0)lpB7%IB4;0FMMtw)3Que4Xi|UM66g3D?iR0Z^D@PYVv?jLaz-n?Jlk}V9{AHA{{4X z4zWO?==x)xY~WV8=yR+~5bAGkj>$F!kTiGHC$M2Z@)#qVf-eV?IUXc!e z5d8V6_HARo^Wwa<1`?+ltfXs3@J-{?HlH^MBeQ1infFHCV|0ME&7AY=pbIaUux&g; zGt&Ts+S(*bBl2OoJdJcKDYl9P{U0h2+?x~JaAad;kD0QGD1UrUPEg5kF7EuqVI#>> zyH^cK4*|t5qvGv}M1+ykiJUzHc);btrps|{HD(%|bjm0?^WbGSmw-H9ntrcK`*_%Q z>_89dyp1c?#_8Wwtg)1t%Y+Nb${u(SN)Nui8MT=?lZga#cNDg?nc8jmXDCe!mlHK5 zCTJjlunC-ciqA1mfP1*mZ3bdOJRUFG>4DByscNiqu&tNfaSX&2$<6OD`M2gFpHF8Iv`By zj6!3508EBJ^y_h__c-i^`MUz2^O7TSHlw0_X_}{Mkp`w=z-5Sq^w8s%lHUp^9nwA? z^3w8(wE{L>TM6sjNnmKF8R_iWZ>{U^ZIR78N; z#*3^X1aqp6AIkiw_xbkXQ22UHpig-y7mRpw>2u5T@7*mAdZtDxj%2cn73fu9=m9vC zDMI0d;()sdCbgWK;sxK=WnMWlDFfcUJ7;Yu^9L$p5QU)d=JVt$qZvIb4^inDV&94D zd0cN-ZBH{E~{3 z?@LBEoX)^mWjJ=))T%DA#9`6l5Rbau1ffTLme8bTQ5Ih|L0A@w43=^S$7_XHDSGC@ zm_kVk7amZG$`}$E-%RVsmGb;1li9&M>CsK+A4poZ$E%|(BVPqgt2Gc&$!CFfD!T(yFIq*$|maz(uFPg4P!NA2$X>+28 zVYuqSZ&r=l)*pJHmamL9h2nlJvQ$_y2W(mf-*${@;fh~fM^11>wVc~`5}2Pi?!6`~ z$J$qygf(29+J-~c6OupeQR(0Uwgia+qyN*h>|-&lP>2p}l`r^ftfiT((pA1H`7@+` z6v>v#FVKCvi+<9oAdO#MyiME(qAmG>7N&!R7D;0kSTp%f1N&sHHx8H7+66S$+D!VS zbr@rUK`AJrzPls!_1kjH(=X4Dq2rFMPvQBuLh|$ADGA_V&?g%go+sy)yrG=9*YO>@Cr)l;HQg8| z=@nRSv0X&9Hld80#EqqWHJE8wU-sAurV6f->WhVjQC&Q|82#(>BYia$tM^!dy%jT) zuSa?*(oUPdb~u8L)B?n3(O5KEdKOXUk*orS%@&Fq| z8bMIX!GcThs;)8AGM>u?ht>>`ug10V_UPVPX(F>&YWQhl`)m6VuSZJjx8j&H#*&TC z(vz!-=lC_g)>q^vjSYgTD;`P;N6}K6T+vd%CbKcJz*YsrH0;dB_|_oa1;2hVw;!)Ktj2iHK(q-+y0p6SEMA zEfIenf9I;>kZy4=6BKKfVhM&Lg9+y5*fT%RQ;i)2 zvJ{;KVREr{xDB;vgaGO;umfTqOdWqWodkm#*;$Gi2va+(rFq%0kh;s4h(iOHV;y{B zm%l^cS4QCOV{OlB38$r7v?>{=@el9cWmPIC<0`|m8ZS)~@_D{7onb`BtRf!EYk}K+ z>0KQ{O#oKA!R6@^xaXE6t@e_w`;^F~j^z55vu~>UGhc}7>~gP1lza=jYM7n z;<82X?CF`Vj135K`hf!b&{at*I9Tw4*6~{jp2CT8 zK&RdL@b~$ycPIH08UTWU@rWF{#HR0044bQVSOE~rGj_Hyku``4##IA(+{Q}=WRyF& zIq!P`5uGo~H^wO50?G@H1-uNThSZ(DsXkNMU%c6jGFs_EZIAU+);6h6iqsFEN^>w3mqN zMTl~ot~cDpNozi-ZA$Fo0Cde_p$m`y|{sbEq076@m9E`aG3e#i&A`d>y-uI+4Uk849qUxau zdnz}0MOXCOkFZ&!h*$@-_pt4!Gg`RecGMg^poDPs^^mD4q3*BMd>P1N9)tT*@mZf5 z)yHSRVXZ^LTd-c(A|$k$WcoUnbb|L1x?xG(v+17Ink%Cf7U{ zjZ6N|#nyvp|rUChP2!U8BS}Y1w6myzB%yZQDRu(y6T8&$bGJeKR z`!t8Im+BppyiNF|hiM?2?Y7gc?L zN-!O%%@u`j1q*!+4I8+q+j*s&VewrK8R;566|nWZ0d(E(iG< z^@Exg5A?ij4F!5)kS~ROMF4X>s9*%YnhO;9>PBW8PU7L{dJByUyjPP@CH6GX8L|xt zGAOn6XK#uRN1%nzn9h4y+vHJ{^Hlks@1NIBiI_;I7l)!J`AFJ%g8p)^EB7fvd* zHA8FAd3|TdB#_G?{wgB7^Gz<4+~vAX^D?1jcKy%JTEYw&H9M4jq~;PHmOl8dpo&!% zFr@1umrb}XZj+p;b;oa0Zu|?gXH5S5Px$*+xd$Azk(KM}2P*nfN211j+Y z+(nXLs$3s?TCm!Dq8vr;w!|sjKyAy^?^FMQDPNGCg3u!I>6Baee+Qm8Q!rCCF>kJq zhigPb4ir^j;I^NM!?X^leV!CNEK5q`sfi*_8FG4B@WH#mX~pPbGhK$C^*y;o^7 zk?;*G7;&8=RmO|ptWy$|d<;+&qx7{TJwp?sc-#88&E{FEom9`ZFjRcp%& z--nlGCR4acAtp;k;_k7;G|s@{sCCIy$`3bpR1733~IPD4h}aF=*HT*KT`R@!H(jx7vH4?-s5SnB}oRV36Zx_cGj%S-XksYnF4`7VoiV`$^|Qxa#T*xNg22GjDyDL zT28a4^ZdE)WK8Aa%|A!a6>|4teq$@Rl}Or%+jO)a8I`mo5svWKP?z85J+(I)qd+-EnJ8DrWj9vTD)33}f@+&MGv82Y(LZa+UWU0}Wn zkIM#7uS*y~B`oHI3{nR*+7<`iw5qBLnt5oSQeTxEz)cpuh{S@VNzYk68t;z-a@q2| zQ#aR5hyPXH3K+-Snl*JKTFNpb6Sx;$9ZziKp6SL$1%0eYwIL&)AA$hSe&+ zI`mz+0xk>uyQKzV+5o73H~kj}~W z8arcn5CF`&zs!NTA1NSe!&my{66T&8NopSv_E_nfDf__tida$nE|>Lqh&U`1t&V9b ziBDmgawC<(@e_X_M&N7_TIJh9oyW*G3bFCn22(4pqJ)W4%)eTZC}p&{6SWw(-6Xb& zCBXd(xT$#aaXH%DT%A2tG(+#~bPxG_0EVz?fmrk=Q+w38cJu6rpHKq%qIHDCl6@kC zDdpL{CACV7eYs0}g%kAhf7qVm;r!gDMm@t`&$KD3e@+gRD48m8dm~xsY~bEdn`l+)Ez2w+OeFYA@wMIPQ@k92W!v3Kx{P)d*Df z2E>ZhGO>-C0SeAUCw!dv9Yh>`^F1F<{C&;Z#)%fZ@2X`ZeU#_<(-2Vj8`wxk!lNO^ z|JEG$+Jb%Wpvuo2P}iJqGvG|6$McIIx(M~04%U&@Pa-Xe+xGQ(mXOGo)`2w*sZPy8 zF&*ZD-NaRuhm5pTz|e35I@=kY0#To>7HKJomPeN(@qeErVA<>@gXQgp2dJr|FSV6F z_sp%(Sh*NdBOIF?C0l#6lb>7S^-I%7;`niQsOj^g3aEUBo}b=)SllvjuYf4xIpi%! ztYDy%o1vUe9Q|&oSqxWYCcRjDwTysubKWUQStT8B94VN<{vfr8}c^Kj<{&TkECO5GdzK$*};Ip&doKj>o}II8OFd}4NTZH!`0 z4)6=ilw5xIpa)-fe(rh16Gz!URSR4-A^dxMXTNzOy?-o`<4ejG$I;TpB7H1dDP3NM zJApQ=P5`#o$D4h`qaRVRIu_wZEj7;*IyaZwchZB!H$9Puj`_C)_=@H%4_hsCy;2K= zo?=S_?zmCFR#s+Oe~DGHs=i%aZd(O5(%y-Oe?EX5802F2q5WTJ(eo<^L2W70?N;07 zi`sp=XPQGxzXsFNoG|*k;QH-gvKjoy61=q`vPJ@W9C~9hxMS8UN(+PUaeM&ut(N_B zTpZsuORU6jlU${+@N=z)lh8rKMG2$Pr^}x%LVjfscoG2oweCFwx6Pz!CM455D5g{*CLMW z9YFzLa(K2TJlifOerw7JVTfNi1=GA_ta!u*yv&3rz%Ah-4sEv+y)zC$! zoy6m;iGQ3o&TX=CN9?Y;-(&qBgU~f0>z*AvGPjjZ!5Bh7=WvGkYkzfi;!H-$OL{BrgN4VBCl%Y&SL9mAYXpzIPTtW5Hxx;71;Pc_t4at^LW?C7-WuB_s&AX`>Yqr>Wz{U`d3e<0yd^yEyKh~VEm6pP_H z9d~g@HArZ`_W)rO@aS_5^NR9eefie9AaSHyXI_QxeRGqJcU+jeyNj7)wc0azo{?tm zrRm4(Ag0pX7VA$D992{xoJX+r65bF&F=ZEvR!G53_Xnr@de5l#LP4^39tdb`BndeJ zef(_|JZD@qPO}wnA}~vhwMrRwdAPAST^QAQz-`bN1rF6Fgccjanw7R6gw^>^;~<5T z692kZiwWgkn5JRY==Mtem=f5LK&GcK>Bc1RsR^CcRWvztM+}8lw)bx`s-_etRuZTn zUp%-}+u-17{NEx%zQvz)W70r2nOBpzr7KIUy^qUedKf2Gjjv8LmUp}&Xq^}b0dzx* zUXK}Ce2Y2GWe$H}!}JGXeY&Em9dbw>s{d6)Ps@er54`I;GZmrjw8Q)`P<<53@IDGU zkN9cHo^@R^wQblnCi}2>SM7=|4#RSRpbp?dQXEy2$eU*GO;f*b_J3VMi&Frny#@iQ zB6BLbAU>p?Tdq+O{S^-eb*mePq*j0I?G5}F1Ga6@8QzqT=PQfj-D8iZ>INx_OS2$l zD!E-~{H`Qq+r~~MnlxOxo2q7T=x@pI0LX)BW*O9}g>yq-5GOLSfwoqU^U!FkLF-V@ z>x&ugq18;h?JJoQ(v$4lLhPTnsqJwm`h?R7Qo9+FSNlpKK=Bqwe-N?rA2bdiGu(fa zrR@spZON>8Sxnq=)+U;)6g$|@CX^x>PO)TJQ+-ut|Leo_)uFk?- zRI|AgyY%Q8B~4_W#5u$v>XswEPA1!)V+Ad$K*r)aGTQYgUxIV%F>rw2b$#vGI;dM286gB zp*7FI+L4i<)NaGCjQ1J4zlJoCiaz^PNvNB6}r?$CV>APY!`DxE`OxzYYS1Gd{~ zRRNF^zqu~X%!MV`po!E%0!%f(KERvO{Gcz70+l@6hE;&=Vu}Io`@JIo=xpWxJ$t(6HDZ}*P zt3X3A>{#Nz0c&N7qqMZq0Ga9GDUUGMMGQI<7T`dp)PyHDQsq|4C6K_Jif8D@Hrnc9 z7m}LkBA)VQew#}}H}R~6wYFKEqy1#o@Z4Of0JsKACZV}2GU1-qtO0L^xd>V=W_zz{ z)sf2Y$aS8ebVcgNh?L8#E-dwAk)=Tbr67w~RQUZ6Ubarj-Q)I(W^H$S-8{4(z_KXg zA=?VFi_v;(4xkXdaA9v%xCePRrgw&;$k+wmSL$!#Hu6Kz3(?P+6r+}CT%sE0c+wxi zz|{pwLiv$2_{J9xgvC-c?p;8+GrK3~9kUqRO@<&2M*pa?h5erZBL-rE-TamD?X$_R zj}ezF28%tq_gDUAZyqLU`gXgV3Moz(7(VQzcAUhHgvS+C-v2Rd+}?>BB}A$>dXuFH z5iPZc|A<;IZcRd*iaCR_Ib~4RSsSNak&gMio>8r6uFa+%^UP-BSgAI-AgA;V&c>=W zvmkD+qgo?Iz{c&4x05ExH7oOCn) zjqMOSLHzc!88pJ`1ntC+LBC>p`w%W}ne(c(Ct zqo%Apjnb5vepz&tNNiyX?cURN&H_IysP2+L!8;Am2~f?WMWhwY`#}9-_|54ozr~o} zIi7OG{r>`dmZH8q+Cya@dO)R*4Mvj$oMcjw74%KAfA7%VcfAQ5HC~O>p2T6(_Bj?L z-m26t|0La_Nrl1T$QNQV+tOLnhJ6-a{D2*M zA}Yr^3hwUAXb44K;WsX&j25U}q;bh~b}98-xfSa3*=!W<3L&xm4rjO{X!mW)ge=iZCL$V=h!yJcEtzj6xy+0w@yRoPRG1u zjIg|@Qw7uiP&5r{ZADnw7m|b|<_}3y|Y3nJX#HD6d0;N%9xG_>rSE5vJ=%?=qVR z6}rT#L`mpdwmTC@&qf`lbWC{kZ%dxJ^!%ZiaKAR?dDzETm(X`>e8UK%rxKA98auE9M+ks3kq<@2TSzpW#ber7*M|#&s(Ygu4FB`P ztmIsW{iT2;S5n8vij2flX&TjPTN{#%ID4ip={*1d6P#UOk!%!at&YQ+z z&8Ho#FoGKXn^gn>9BH1Z_&N2CWE_2%17Cb_n`<7(ShJAz_vVtt1-Igen=>geErCni zN08_JARRSmt?+^fmxve)V^@B7fHw)3t>i*5?>Sre)i$nV=NS!XXlUNlrXcqJ^Am+^m1mH+TPpt<}!T*15@k?+3Bo*1!l?muQi-*QDuiey3yI&eDXH z9t0ZA9P^*oFOrRrLOU(A+cYJd65yZIzkQZB2P3DgZ*TixU%gaNk3y<_uq3>D>f{c^ z`v-?!Ns~Xob%6Aq%_~~+P5^aojP_2?{?3=a0e0xqI_|T@aB?nm|2P&5UxMqjOV0jy z2_~LDT!jKt?&`?~!a3j^8Y&4_gTU|_*Y(K^zj<6q(fNoPokZV+uyZwmKW&8HyBjcc(;uvGANkfPj$@xnmB)0t%o++^@_ z<*yuS>%@m38=M%yoGM+qV@nW-@bKR6_+t^iPT&4wVDR?gNouo2i>HD}rElt>GHNX5 zn(6w~Tt*@$MP!XEEXmeRTHZ!%R#8?B2Hk?E9%RR_NO(HI`8GHZ%6}k^YoVe&QpXCt zU|<=X>K;QG2@d}eRCq1s7Xmr00>ycL;D$S-gc+Q&q7*1BU|_!2I?ODQxLdDGX~Q7^ zJxIYrLABT)b!bv%=3U(CXF4exB;YrHNLAO4E0W@v&XZ=>*~BjeHxgm`-%Hu75Q8Ac zm6}J7nhqM$b!71`q`9x^2Bp|@u9~DS&wW&feG2tr=sQ+w4>H!r$)zVD@S&Lp@`Td3 zKrAQ*1|g$+wZ|a+X3gBJTrGU=;Cvy2kZ=dqU1>_ehf7A94}-OTjHL3Mgq(L7a8N+k zT@^kMXj{;&(K6@Iu6*RB7t*01??FVIad((Wj-D;jz(@!_0HS>%WjF(BV0oF zLqDUEG-kE~AN$jo@ncSUY--eG+7c=OMgw%Y`pIbq8-Rr5#KtC{^B=M9JyXmK#wQxE z5vv`JYq#n_8C$04{Z~$sB~I*yzO3oOggW}eWVYsO&12ifdp2=rbGq?*4CETyRR|Ng z+);EhI<%3 zmo&fL=^-8I^_cp{ zHZo)U2)(}JP7+Js!bE^H8Hsy9}cUps2;f|3qjahcYj z++55XGBr8P)4{6M%T(1r+0lX&W$JEI*TFQ;)(^22!I4x&CQcI~HNcf?Q#0j)e9Hj) zKt)n<+fVTvAoK1MDxx3WNlt4CIB=q3hN}35BmcQ2?*vNxhn+1%!X=8nvP1yWH7Wo> zrVuA-M4XEClL=#z_f4Ifg}D1yaPi ze;#Nvto66qad+nWP3_T+fgu_FwfFuh#NgbHss|qW8LM^;Srh*FHtMFTJ)Q?y{lC_A z4pv%(^(B;6oj>a#$6CPQq}_RYu= zFX_zFq|M=A4W38WRe$nct8G*sI$pMQZMAO2jcAkY&UE+KByIE)?;jWL21P^W$ncx3b_Mqh`&te~+qfO#_%UqDuPle9${ z6~(Hh;gZ;5Mj8bgPd)b;!Crj$ER%nF&2qgAo!3Y9Y!qq6FU2GEdu;T>ej6%;ak2+) z5F@jn6@`}m%shzguEN(qMMb+$C#{L%mXvTfAQ`7>&aZ3LA$NG+mb z=3yAsuZif9`SR9FC+s`UN}xT;s7)DLIC2xFj;7 zF*87WPz&Y}+OV6TV1Xz3sQU~fwh@1yrrZ9_6}xIBa(Q@X1m6aPpfOvo^{W7vCOApg zrI~9+H(4k#irtkYErbzIYESFvaD0u{&h!@J<{Wb14S zo|LbUld@{4PUh}~=FA2?&+#LQmO;~TYajK*!QK<4gNjmi-}wXP=Tx7fPZv0kk-z>SEcmfVN6n*WJgn@7h4%N3uIwQ&6`KtBjjrNVSAh ze?Xhfj+`HV8=V+djS}zUXnu?`y>qJ=urEd2X(+OxroSjy*%#5T*;|%J-n2WR4BgVemFN zk`ZBQ0PwQiovFKO6Ym<1!?9$}S2Ne~&IAVoj7lHAlUXYA#eAq-P+72RD!NNmLraf@ z*r6aS?YO{td5~P6Ue|N4TexwZ=NY+|Cl5s+`>oqOMvgFCPpXP=@jxEwalt2zs_6D; z>kMcSZIPN$s!4UMak4aA1^K+D18DZ(F5 zeR^X(mJ754Q~Ya~i>;ORVZ`{+J-&<%d*h9L4*g;p2?lX!bcISEei`*e8Z)^al7jj5xSV4S9O5u z_^8H155T+D)x;Xf5ddq@?ef|PQGH^z0E64(2bsna0>f103no-ul;15X8+R?}LB9S* zS`V(2+|%Atb$Y+vi-YT0AU8jCj5!DaS%Eq_s&p)fGHh+~f?lQo%)dy}DbC~KB5sej z_h%#K=@{YAVeDQ$K5@7C?o?Y3bNIP9n^ItnBsxhQhTZKuH9iNIwy`jnQHK01292tZJY z2%*v2!5VC}(a_FJWR9ba^(|ClUAMGt4{EZV@VptjQ6n4yWuu0Nq~c@LRe_^1BUAa% z((`U5w9oWZYmk8KJ&}nEf9b!fy?g@$tE^mw%VJ3OH&@l#jtQI3KFWpnBHG(o@<{ou4g%VsEz;pe>(BL}t#F20pmI z2xi;b7QOT*9BUJdqAf|B>WO<>Q~#iQcDPMG37?=pbt)NIL0UYbgA`d4mDwnQ+G|Pu z=q`^syY>+&Z8;c9_KmO+J21HRAV|g51=LBGwvI0C+M#I#>7|LnFxQ0VP*5<;%ZsPE zQVbf+w(?2ZVRHgB)zVe<{|%8n2D3FGBU5%bZ50Y8=((>&gNT-^_a3BgY?NttQn(cN zMj|r&7$pqxAih01=qd<=qKS8kGH>93&$-kyO+27>SuBwg2aMSuV zm*Ye#JQ(?eVXN`i@ZCivv&Lt4c5NHdsG3a2uCuNYX<_q4>6+Ogl)kQ5-n|mS0g8PV z0rt+rLn%M~DXpTvu#voy9@FNGZ&*i)YfI`NPBvUhJBOyL zz%BlBZJNyq-cX#U*aYk4I6%3I7+ z%pb%gPM7&XVd9urH6OH3i)&if5zKjsLBEF-Gi*UrR5gT)_Siv4I7QmqgY{+cYL~q2 zm0I~EPh>wUd>Qg85#;_H{L80gAFhn+Z^6)KkGqeopk=2)FKvh{ZK=vusR9w& ztPpscwH4?r@Z?doV4ftU;H9?mJ@nXj+np=I^t}Z);Mt29rW2D{zTfM{!2I`iA)_be9@Mo5^ zcsIoM1RD9YjG1B8?O8H3RkB4Dzt{K-h|0CgqtLLaEgBRhw2IFwNZ8BA5OHpJiB|d0 zwng*7yq}mtGlLbF1z3dcXD7LlxVS@EN^(B4G`vq+kHi zC++4Iq%cc=&#~*ch1u^Tvq{4ag6htK$#+>UTFf?43gd9sK6{1`7Og|Mxhlg@wZ>Tk zpenMJccGF`0eOP_h}q{@icR_)E|dyHR}GNo&_urda{jw?8Dqk@codRVyLySZ2X{CT zpw137C*p6J(>$TRzBwsmX_giCfIz^TxD=>QpGk)^n>?Nz(`B*>;suP?xz?A>*Lv$i zAU4n53C(jL%|j{DQ@Ux;ks(rTia2@HrfmL;wKIyiS)Yclf;h;t`W26Ai5zyDaBVOC zs#=@ahekLA30Z=EP2cIF@(HN=M{Al+TSClDBT{jl6EZ@p(1oo1nNavR7JWH0A2 zFAmN`D>d3azEmJxHCEHD~Fnfxes}TG%<1r++m2rf`rnc|^ zv}a!-K*|iOY<6=Rt_R&1s{~S@_B;xV+4Ra_dkTg+&~do}UCOQr4iEE4&t;k&0vxMp zyZjZ%3X}91vjHsmcCm6Q?qnyiaBWm!919!A8*>%a%z;)25p%&kI11yd-G6#&@mW#5 z?BdaVdAbWbB#i05jFLMiM42!Kk=agzjEd9+&l<1#9fu>^ zD0l!MM-L+q4j?vSg&0Fm(zPPfF>*ib+QGyk2Zoo+%I);){=Jq%v+u_as4MQ0WL!VN zqDn0r`Mn(sBaw+Ejk>hQX<2oS5VBV}5;`i!?pDQpR9}A`evxj2ICq;cTN1Dar)X>Y z(xmOl` z;LGMgEQ=b^fA)`!E+YPem_Ol4em={%Z2>YQV4cWw$m_F(`M96gjPlmwG(!BkCo47lKbW=gifNmHA z2}OQ*ey|n&(nul%IX+pJz;Vmgl*Yn_e#LK~tq6`2jJm|QIeP25RvKey-_i*|wZr!$c+r#mO<>`jUAcBu|EL{Z1M=w=Ho}>Z&P))y^(h5zecz%6P zUTlUMMOUOxC)^gf%D+Eh_fGLBWF(~*3mK+;z!tav&hd38wfv|O;d%ZBI%j#7*%(<7 zkzh=CcXcZcWk|yj`BKMs$sR6V-B5zgJV^)v*bV5%oCc!2ARUI}6kmT)n<7j~QsPfP z_&oKiX9{`RXMA~6ms_6J+Ogs9)Q%E1?Ht0bb;UVUc;l(j<(k|8;Du9jo3f|yUVh*X zm5l=_P9u%}jHQG2lxRC(!k)P^Blex z;n}HuC*WvOYwJPhH7QGQqL8d%a+w|>ksm5@;XcU&{ZVB(fp8$S>HWN7nMmF-p>CQhg8%WQT%gGsWVMb)-?t0Y7HKn zN*RM%ws0%^jO_nv%x=HJb!m17iT zhz2$Qjy0ws`6wqL5)@~jiKxTBP?E>*mx~jW3y7%%O$k=s3L+~z3^swaiO;Pyy=--% zFMak*1%qA46hgqr$~!0_AgxOtp?c@p(|}2L9>Q;**&)71@QL+eqR*L7~Vq1O=^{^BR0sqXK-5{xBx4r2g}!Zh*~lAX)o%3sMCoU z8cU$bJ^|T@ z`khXoQ(8w}saov3-?IDV&$B*|qj|KS!V5g2>$8cZ;j#wWXqx@-YKs17uVU*M5zO4; zzS_YY27K7f`rNZl;9WQm3-e%%yFpnTHI4wJ6~1+!kz$i5S4L1zt{6G{_Cp#np6`YE z80TekX^;7xNgoEH13k*v@^G%ge6P#3qv{8jezp+(^ zL&w0-ZxFzr+k*v_9B-wmavY?vW)S}-7teiq<1}JZ&;{$TLSJBW&M;e;DMdHsapIO_ z4VfTc9+OwY?3AFcVLx_Ci;NN5-Mj7CBfOc?UFI=r1t*epreZRy{4Rp{6~U21-$L7!;pkvFPd`E%O{kF5j&5eX zATol?az!!{K{XDevo=lzo-x-9k^X6QyckoEu4XyTEi)_1e&CGD0%TAGO~sL$>H4r; zjR>pyqf(_i%WgIgeq?Oy%BtyFe2pY9Nbzi!ub#g)eCh)n`N$_(ol&{xpWQKlwqIVn zM+)LI4P@ye4?D^8yi9g_Hq=`q%1j8m;tQxO7zi!Fxb4$~ol-(v$f92-_g0|8Rf8So zk^(pI2?qqTRF>w9_=mwodRUIKW?rl-@h3>!( zb|a=0g^}?%!hBq4E8TwKHFN8jd+CM?=NMfYSzVYqtdd?kj;Ry-0l)H}UBDB%V79em z<$10j7_k3b49E4(Ov(8V;j^F7M}BCsO{s>31VQM~U%wArj!FwNb%|1kTBESrrq_WI zq(T-_i#waUWCiWM86CPT{td4Ms%m6olKrRKDhV-D$+7@PK)Anl8ihIx8sYH3W;7F{ z7lav!uWurraQ`$c;5Ee8v9w{}#8?@=>15QDX4KeL&ynJ$qItu>F{j8n!^)e&%W_)vo(nehHFq0y8n6t<;L z!h2G*thmK=or^bqktz$739y%0G@;C!oc&Mgo0YI%T1kJlxsK%Rri>KbiR}9hM=|f+ z)u)?O^(eLM-yvoGFtVE06%EW7Rv;4l-Lo1*_B#?M$~63t|6LG;(KY7r*Z2}g?q>TD zOhsq-t0|^M>+3yP^{jUnUQg5B|BALl zboFxsj%^`zZJSCL^Q+`+3CGi}K_S9K`Gd%h!*}^)yT?q4CJLm4 z3uwc+nc)^KFC*enqox~Jv6}fJL3_w!KB!gk!I2;DT56n3xM=aq^rO6O@FR{?$FBVW z2Mx>wYFi1*7%TB!aG!EJ83~e|^Rlb^fQ>VD5kAAkVW)a8Rit;G2nNY6+)_;b!gO|Q zG#MhpVrrteFG(KM>M-dWWcH-w+~uAj9ijK;1-I1F7QGjdg&DjX1NijWWoD=;q}$P&v~lJ1=>*}oP7GU^*%K&ATQ?Rxi7*SBgRU%J6T z*Y#?Z)T%#lL)n6M+-zMVH;UR4vnwH&6cRv!wsh*V-sM;22!bYMB))MnR8qw51`bh?J!1)9#O_7{ z^J+P*jEX4A#el7(~8P^=zKF5yg{2>sg}xm3J3nP)pvm!EMvYk%u=Sz7oR2r|57 zbZLd&jC1O6c__Lc6vsC$_+Kv3i=L7z>=LiUft`w0sNrWwr?TUcM4RVx;M<~w4qFZF11Ub}!+cV|w43iT3RLC}IVn2* znzN3&QYI_Xngt^`?$*|(Xdy|1?ayQRfN3w}Fg$EY3_gwBEZxcUgamd9%LU#a@$Js$ zY}-lpmqm5!n`}qq(LqPKP^y(>3)1G^+c4El1)Y^G)j%g`VeFR#)nMeOwbRf)n$1W7QDKjuqn?jmN3kIJJK{*9n;X&tQm$rHMpyiB(q?&d zBbTxH54GV4M&~ckPW6>5+$t%uII51hg(oj*umNNgJR8R{@|x0C1Q|DYOm0}hr>bBt zkK&^u731QiF$CbXC!g{&@>x8;D-WBLE0o}|AmcVmX>eQ@S~sYVqb$t#mGA>ob)>Ln{GICciUuXy;U(=Akhf4Q*XNS=LAN;X3ziTAMgQG%E==#S zZVg-#52~f?$tK3Zk$xlP5(6}Fd}r*dUW@T zmL;FoHC@Z+@L4hAJTC^IXKn@ZViM)BN65~q3X!Nud0Bg^<6(MmVe7uoHE;mmx*zum zKI&>U6S(gonfm>Oy})Y6U%)z3ILK4@r@={zbK7efgvj6g<-x2B$C$}i%&Kp@4TH-1 zCk?az!JwJ6`KZxvDpcK{S+B%$=3JXf#2SHz^=4{~PN!V?Xs;B|Q*(Zy4f&0%6jjw6Osyw)8SuEhOXerq&0Io=@QPa4Y=#m)BW`zoHk54skl~LEJ zq639BrX;F8L3bJ}`d~p5VeQqOxz>3ZrZqWd*;EyAB{y zLPSK|i=VEquvkcm>KtdW&g11;(L#rvGXqJJihN|Y5%~Y27e!Qn+r7U6%J61pj1wWe z(|Z{_Pk9()mN)Ed);5V--ifg~?t|(xUIUu?6y$Ty{p+e@s~vPKW9LIa9{z@~Ed5=q zAIQ>+td_C>Ww{}zzvks-L8YarI>>pTPMY~f+0h10D5R|<4g7-3r3nAJRuuINmFjsy zf^95wCJ3~@$=%Kd_-}FX;H$sQDOCqQslp1eB*J~>ETyTk(lOLqOwiA+1lDS%G@}82 zvnawIQ&Ngw(*sPp*rJ!|Z*cY7=S9~a5CKDYNq;pb)Q=7pSKGEj;MBh13KYJVza%R% z!IM-6c;t8RVtRm3g2QAv9}qVtwt|tT2-LVa1sEpNd_M}w)8*h7dPAqzXgbfB<{S>K ztfV33FevE6rjy~kVMpAjq$YP0QV(nH0;uWlgAXPdKZ|E#eW1-b(;MHP#Zd^{mW=Z6 zhPy;anXJNRS94OK&G?Q{=MJB`YbAkH*~%tn<&7nU`2-*(y}ovQRME604Ce#D-DPn= zp%7{?4oeHb=(7#5il`ntrMu5NyUUOXMbnm*F=8cNq#fFYp!{RXXf7udf`z@s8)Z8K zJfUN|mySkC&C+38{>*DNZ?Cf|K}sMeVu#3TSwV$@>4(pWacBzHYg=^xgHu^4adVCP zl59RtTZo8q!uMW-fpm|hyt;E&dFNV?4@Rz`b$auOZFkDW^ii?9c!cQKJ3=`f=>HPq zfFJfYd)&JD*@9`8qp$L@O`c;FoOF50fROQbF1lD(-_vutWb#NE?Cfj-l0Rt8WWYB$ zg)J#}l#|Ty$KuWV4+Q!!a)dc6_K%}u4LYwmi=>dL?OF3DwV`Y=CFGZa0V2%xW$j3Q z>hF4Lq_Mz;Oa*3D_riJMJgzf0t)L)l4*Vm*L$O@Br}K*94_PmOFfDvv6B)^G_Uo_h zcFf2~pTwmLs!)X?n0fg-P%mA~rpjdS>VV@j5&+`V=jWR`G=yW+B-xzS>(@h!Y~`aw zB2O_aS}+)7K68av3xuK%7`HTP($*pX$*B;;V`<-l&QHw-RB2k z(}1*8rapXfm>bxSjGa|Wm~7R}ZnEt7@NeUDdZ*F?WBJO>2j!s2IL9bN+^;9i%LvDD zpm2l0+oKcg=1+0U@QL-Uc_l~UL%tgnj?|J+JOpsC?Z%GAa2+!2@}5&s|@)W4i+%&_E_m-xw$XcR!Kp6phv(c?uplI%{zz+C@7`(O zc!P=a>--^{sAFVf%P$+xPd!+0mINW{_2W~)t+*XdN4fj*8eGNy2IkUO%nNfpfsN87%gM~2%8+NwL-6N{^XB%m<><0<69eSa z*hwDYR#)^Hr3>w!W%>w1?r5>213+mhjks(>)OY18D*M^PRKyl8=+pEVSp%9*gs|tJ zS|Y|uexnUnEz)n4wT5Z=4sKM3pK8R=xp#+>nFOwa>~jhE`1aRWG6dxl?^D@C&^6-} zo3Sy|ZWaBxm^MIh>cN6lunk|^IrSOHWFltt#swr zPA13l&1E5fml%CSnfs(kU(;V^h3GvHA;;6ifBPI)EkHz8+*7+it-$%X} zQN>kLmc#j1_Orj^@_PdVHtU2+tGda?4bKUE27OSvLKyuDmfLzQ8gzH45kDryYl;@w z2Wf8r?I{{EGu|RZ$x_X4O~&>po!Iu1qrlHw zIqxk_1jc#SQz2I=03pnSRom!5d3x9<_-0=BKK#OP1PFr5w;MNEkmKnSAW2Ed;orK~ z6T8+n+7;Uf)#lbvO=?X)+I4=+$6I=?NBCVUUI?G5D03__pn$!ZWD_hN&#(~4X*t#Q zecuSlXcuZ1T|3^uhohA1Wn7hF3?(f_1tkUDi7lOkyJ6g# zDz9BrOvU&yb<|u!^F_=`lzEyqK%=NDRBQwDDGkh4Q`SV`G#&Xy}-A6fULUS8Vnn z-CAi*P_BV~VvejAG2U^XTr|X)Yki<%7YeUqM>f`SIX={`PEd#6=&nY0ZiES`f7-y# zpK596&+7wWaF!EU7_U29D#Ad4A1qhwHv(F203lOoSAd!OCo<13Wzo&1<)ZU!^eO>g z$(Zr3lGT`Oa0iv;u*J91HY55C21YE5p|qXghHZq*+e!cUm_m#G+U0TRkY5RPgW z;^D4zYhP;%aruOJz}$o1oK5-PGK2RG&k)0&#RWpMuL}!{;}9?rZrK?mK2_=%?w}Ew`cnHyJ=&MM(;^)x z05-JqO_KbfHQx~#+EqMd;##OYizdbO%nXR~bZZc6-}@>lwFmv(1EicGBR>k89tfeV z*iMoD_`1UtpoAa1+R9+zDzRjfIzEArO5AIk^R`k4IWb~<`vZoEVF4qch{D3|_(Znb znRY5v;3){MOETc0Bo{LVKVC%dVD;9slvce2Po>kB^DzC3YG%-R{n?&H#+xf6gv)ey zuNGZL+E?>0HjQRcuHKa|ubT%-#3%hX8@H0reDzDip7qVnEY4*6;-|q|J zZsh~uN^HGwCF@GR0@c~533T4(U9D; zToG|~%$ph_HFmu`JmhDq2i*tGT zr=axH16R*wY25uZ`mejsOkvdTm-9)vn)lN;N-Q@MPJc&Gar=g8wJmn^EThvTB+jJr z#S^QQZ1_ubkmSvLgx`})r8FAQuTo$P64MH9rd%nK<01A4*#>tB5ke%eO+n2nMsqYP zttlEz9(2o3yinWM#6GN5jOZ7Vd;5~<*iuSFx+)}hDto*H@r#sa(N_R1gW7-dV~cl$ zFnY-C?5;akEv&q>=uMssj%1kvZ%h6pum$5wof-=;^7=Yf{1=ue(Z@A2v2Sb4w5?kf zMle))u4>L4Js9@%hW-TEsh>9$Kwjs4t1d~Labm;MYV!)-w_MmasS06dlEy6-(VJoq zZ)*cuQ6%%Gx6r|PtSkpo6jHZ+4Sa(cV|}4cu;s_koRIH*@rh@MHJgK6ocF=AA~N#F z>>5tobfg^Ov%r}t*sJsS*=kiUKpWg#w)^pMt8AW7CF|2sIErI1Tcmk#4L0LOfWwyc zoy*Q_VYE_AYj?huOF>Skt!KuM z{>~f-mBo8Z6(jbuNJw_ooekNGU)qP2S0!i3R|s8K9Z}@sUGshY8cnUwFG*%& z{i?W{7pD9u7Ztk<>>HgvED(F1wJ-O9Aps|CQ zdCBgD*#eUEb)H7{u8da&%P$=z>Pl)Z)x%ZP$OwA-$8qV^v++=x@A?QipYz*Nl9?p2 zBEU@04}QoJe~ZI6PpyTuw;CnjCwEA+^=f35h+s6#QnD4z+Bu;SINy}&7A>W;!ie3X zpqpu(S%=SaI82``hs~j?B|+o`vFjt)!}dU8Hr`i|RkkM-Ap%{4_>xQ#D`RvjUsFo{ z?wMw2;qyhDK4|m_-3F%e$buotc7M{E-dU<56m`P3xU;7Se&Py)8x97$0QO8(qxK#A5fbDCwz z^M?7k@GZVs;2`kPj)4EDuCpNjmN0Y)>_n1T785>5-n3=ZA}EhRNkWsE`B#U0k;-7!t8cr$fJ!Wd2Gg{ z&blkyUk-QObN| zr_$1W#Y7^Lo^kC%Q40N6qwkrt2alyoMkBE|l z9SymoooRqJcf*jYWAzU1ox9_U-Fr#mPOZG{2M6q#uTc!&zrCnAp`x5OkZ_yY_6GO^ zaR*A)x5si|B9(81RGkAc(Xok`9)gFs%x&{)W6PT=l_c`Xs6kgOeuchSeSU2IM9?RM zdZK`_5c)%0*c!R4?w7M)1%NwSG>=YgjLOhf#Ulc4Fa2|_t3y?YBr?nydHrS)shV?j zMtIR)XziScONJ**jle+b7OY{}Zh}BYG z_m@Z1AXWGV7-A@@!51WqAu}G9Q!UX-T-KG@feo;-{dPE~?h~{1!bVX0;X=0?=ZfRA zcpzYr6z9f^F{n!y?Q{7QlibsyjAV4>9#Fj^Jf-{rkA#=vKvQI-4JhUS%b@X@>Jw{n zw-gCVB(rCMeg`(P9-7j|#$7rd*r&5qUm8)`96>otV&S+G;yY~9EnbKUBRdo(M>0kS z6}7&{R>qoy);ZNjA($QG;HVDgvRzuO2mC#0W~+b0Q_Q-cOn7aqebD}6B8k~j)j%x@ z!@I4&T`wTJxhv66iu);tafG}*3j48ZS=wGcfM#HmqecqIu&xpOXEK@%XeC7D1W}8W zkCwN~?v+=rEbXZ|Z9fYV(2S;cZ95?>FW}o*ECIl)rKz?fC#0SimT&wd zD}UQGW1Y4^zpz!Ntm&Sv#tk>W))8Q)%MQM6eSH7(@cx+MJo5ZixO_d8hn|rq4I$+ zpK)1X?fuQxtvC70FjGU4QsKbJuC6-72WkXA7Hz5i`n_|c^Tubv>o55Uk!?%55d#9lx*|*5%18tPPVHn0GTiZ)hE72SYp-C5#w00TQ@!{I>yst#~?M5J?}|O|4s0^>j7fCQPDY*nYa)v!qm>0I8fu}kq>tr8{Oh1;HA`vY+0bxba* z_Hp}_=&PrAwm(xxNXAVP@lt1ur5Bow#Q;@v+WO42dYp}6c-9j2F>qSH7D#dd1!k3x z3B@GbgGT1;|AFRlBf72RFIPha1#Js%>bfCHf4EV7^g!zcYz+01bQ;IbF4xi%lKc3tS`%?VtZ=mD^m@9M-ju8eMx&>DX2S zf0AF}@lmrwx38j?bP10t-e}m0lTw*z!}58*x>EJ~5AgzfIJ+Y_`$4;7z>r<1X%>ve zko{yW!^)}^yYNTM8S*)6lSY^o8&5c);$34)OZeuAb)UZ5#<0X!OuB5ai;sTbO(&G;aLo|HCydELW@kevY zA*BM$>IN%6cw8LQdnI%>))6vLLKz+QgLAfm)m`B)ChXm$me~9;*_b_d(1fTj4GGLx(nl9R=II-`?*L}P1NcoJ?2r<}QaA&6cEjdA8@bcCh zarR$C)7jmy)WH*`$a6(9NOwGvd9tGAK2UvxID3xaYB26MCo%=6h+@$=04haVPC&$Q zA!48u4)7cDNl{#GkA+`aT`szR%x$*^-FB$xH{e`aEWM%h@sSSnG#FU&e`oc!apAU2 zc0%iX<;Y(DzEN%W8@kKPB(ceu))dx0Qq8?JM)avW6w}}BSA8FhOqa$&I~4FmZVxa| z0IdO(RCGSt*^De0guRs+Co8QCQESAE-I{oZ9CR2miHDD~uw=N7j zI=Y?Dn`?&mbkn}|Fw;$zei7M0g~>)x7<`7A_*3BlLjL&oIyRbwVcMgin?G}<^Tsus zf1(+n)7nz3KX-&qFmvR8_C5l4PMAytJ0NQ2pv^nqpmI#n*~dAA-`JPG-ZS;Z8~aEd zn`-Y?OeT2#fYh7{r$yG*_)0KabNv@!rIlm}<~Y1Q2(`if3J zhC$Cy*qS-0*7qFWA!NtaTCPvdVAL z0LXLkJGgfrSy((~kcbfmq0I1`b!CR`bkJzbb_B4)p%-})tVRTtKiR;+rn^U}i-B7` zz`_qMVLGc-^3YhSq*(So8!qBaHdFzDO+WD7_Ce5YUt}M=>P!xrKT>a?bjymy7@RIm zpzT~7?lPjYi6}91$5!Q36rd=%eAp4gO+j=CE9TeL86y0cflZw%={SGyyB~>*1FOxV zDwb?pX)LGXp5g)ye;f`1N;@V;%sO)l==k?67CW{iDr-8r)!eK?Z|=8yqXmG+oEd1N zToaX*j@)~h3T$uWtlO3a|73o(UAG)ro`YO@9P}t_z-UV#SW^*|N7(rjraJM*y*c(s z@fkEv^!jYd;2On-m2o|g6!!NLWTE1?kUYGZuStpGA-6$?faAdR^Jw=xH>`p*eJ#G7z zVb@D{9pqKk;D2&2hd9gYq)BAVec|9L$6q^2HT; z(Tj_Yfj&la3SLlmmX41orZ%&#BNWo9{|-~dMEdq|K!H<3Cn^<=lIfm zwK6uwGHL#hOdRje=V3mPjo%*$K%dm4CA+F&$rYs+AU1mJx1}C|LdtCsyT-n1!;kk? zyOv;u!)#5Q^X;S9pF##9fPl^>7c;i!PQVA?3<|HStVt}}LC$Z*AImFq+(Ut?jXydKes))5`!#= zMV$@PIX>d3`>dxB^KM3aJVzr`MOH zSN5v(j z{^LIMK<1X%_=1*rk+rg$Q-<6pd-&n(*^?08NvH;%7*$Htd-&@D_D2DF>1~(-!!#a( zC!MJ1vn565f_eqRk%+r9>HQi$;wY4r{{Tnc$_V;gCueQ_nIns|42wdwKrxrfZPEXs zfkvE2e+3QU5QXNrOXg1P8T#y!I*2A+kBaPx25jKJC&xs-5&b(>1Q42MUdop5`6}Z_ z-)kQ1eCD^j=AS=(5D3z+x72c{TtVY|dgx0o`vxGxzwd>WN-I@kBUx&d;&UvsBeLS~ z>!Y-@VEeA_U}L@dI+XDN(y;PywPZ}3oaNHHWDg7HdZNs@3WGLCJI5vXr)3w66ZWNR zp-H69Y#_GTae0dW^>KRTz)LSbFvbujWC(r8b9{WkQZ-2J8fi7b+2*LTR=J#nab8dY zG*f6~^X&Z8@MnA4OQr&DWBqzEqi1F){!4D;4iwxnO7*R1!O`lY>*f!SCVlu$NDr8V znai{C=k_kBnaxGQ3kFtOwuB8C;8bos@}(eEjZvp!TY3<}$U%36q*wm3vv8&R9q|05 z@tZN?>?T91dyy^7g&B}&3EW#q*Ih$1N+d$#7+u4Zt2Cp?#xJr@clD78S_r(IZwfnR&UOBt%vL~%HC2{%Fc;fD4T2MVX7!+i)lCHUIy#P0c^b%< zYr1q2)kwEzax~NO4^m4&?`Ty(%61@Ffws-KjfSSVbDFZsSrkP6i2kxRfBJ07wquLi znHabckG)Fuge=s=zsOIi1zosf`lYm^7jn}A%fAyp6PV(g&*=hcpDEwls(e-H=#BJd zmw6OcWZRTt4QVEh5QT-ALI`vZNG5Kfm@?8MBA&RS(zxa>_W`Up^8K?vmc`|M`T7L6 z1_4_XufTgm3tOmnOkQutWCQ2SF6%akg3fV3LszAwT5QITW z0z0`{KNb@W$&e9ecp#*f%c`3tRSZxk`er377)ha98B75<)8bXw%P=F(*8d_zj9iuc z8rgX?dHUcqhZq<-b^YwWy^mN<(^{8og_7;yFh9gv!B4PNX`wfYEV-PbZd|{zTA$=U z4e#$8Y2JiI{v)=~?Pj%980>c@3oMTzB_jpG+M)ENj$!KWGXB?aB+v=^`)*!^Q&0)r zybvgY@b5fg_@Sl8_=phI3N~}5uYjmp!M>DAs zPCyw4ZTuHbMIpO1pl?Dy($1{q- zx`w&Enqn~>@(6^D>*h`I5v~?|7kCL52_mX|pA}kCbd?LAT$QL```Q_XP@T(dKm9P? z)HE0j5)2*`)YnEoJEeVo7xQo9k1o3l#04ED&S0`GY^1qxCA8&zmsF}?2nJZUWqJZC zCvF{yqcQ7y{L0T0V=SbmN=k{Qs1b{MEwhb($4_@vAtD8!!~H4R0?F6;wqtB552_I< zkwf_+1+8z7-^p6*cUKP8^_1>Fyr+;m( zE~^HEl+f$^5x^{Bpf@IPbEGm%mB0Tk$b_i|{}fHw4m3JBqb4nSUeAbEavhtUkbo^4 zkmqsBV=0YAUIcqju06GO{V9}0rWeC}x2guuLgXGSXxjdD2rvcu4x80Dnn}qfV)9@E znTG+-9$Kdf`O%(qoI_&3!BbI?wY3B zbxpgK8jCgZ7cdNDVxivr1uu$LKsDqNJbX7vi|VD;kb7*3y>G4(v&oAiwqr4DYw`wT z*V(E8$SSTBYAcoPkrqnS>#J_wfOa5tcD*M-4lWI%C7sg%K)h1xrAKTS`zssQ=O%@g zm1@nGIu03~)j}U`adiT+w#Ek0D$~l zA&AAleWuDR^)hL=-3?%wJzJ-y|FSrO!jXY1Ur|K2itP>OvMq$C?O&YQ9#r$@@0#Va zzNkj*Ua%?eRogA#5YB@K;?XZaJOQqVn$KW4gxl7BqV~_9TGeBCRqJ$yg&ui2E$2i~ ze=r%jVyn0?0MozU?eYMxmAswzfC1W*^*-u_QZ`%p3tx#48R!|fUN#8#=0SLPl;E4t zQ+Kz7v&NE?0MJ#sPti;m;hQ%PI@p+HKC-}KrAgSa5M^Ak8h zi+UQkQ&Y{+?a?+!^I$@`9^o8kX{U6qpe3sXMI<2=k=v^xcRT!r>usJ zCpLw1&0DE+e1B@CBulokqCn2A;Y-x21$(mf`CfBi+sVD|#`)OW7l!0<=GckQMy@Xy!#Sw>ScBMIoqT+d}p-<(v+RoLz+xARJiWF zjKuX_`C1A#9>+XT*=f+F=--JGU!E|2#={rTaeFpS#Ju3z<9VaSE+`EIXlRC_-txm-aZwQr~{2#jZ= z{HhigHi4;%Jx(q&q`U?_CMRD4)wzp_Yd2DnoBVgOtc*PEw5h{-@bEjgX2jxfGHA`b z`xJ;}J$@ZA$uHj<>y2`P<-RrtGDElp+L;v?f?G>AOOaB)-Y*O!E2fxml|G1b?YE=| zit4dzhQO+YuM(IFIdV|*!y4XU+DNJ$d}ia#`FMPj5k0{O`m6c7#V^5$7)={g`J(U! z+nCJe7bZl89yi3QWC^bf!k@;HZEh}t)loFFHt10ab=N+K-X3*IaK5Q=N=R*Ag?d{y zrG0L;0&C@$@%JxR4p~b0g6J1!-L&4<&g=HKH9fO^kOn)+dm<*tKQ+eboN0MvS z{-B&`_Q_3pk#H;G0P|MVd|^08jfIf{o6!o~OE=4dDi4$h^=}GNYM_Ix**WxtpVWjw z$V6tou4v{OQafn>R4*UaEp_9HpTi#Sm12a>(V1)m!vXdjC0?5Ct%#7gA=Ksrm_kBb zrj48reITb7rS>Fem~LEj@vy0w&MR+$%dMhw-)ZMk32fw*r$iqDI?*wF-a0wq529?a zn@=dPWPf@*UuU>UUAioz^vox-kL8>Cl#l}0r#wjNb28-!z26rhmtqejNt{mMN%b>0 z2)SMps?b*2Nm>+W1Y;l)KL}{`4F2YQjIH#P8@QK2I;p^aavke%tdp~CFt4vfm^2l9 z|686}rkz;z;LH?TSmX#nq1Ie)LN}M`tDW3$`&ij81dz5>ggz)D1KJ^8#|7qRFQ>Vp z=3*@GxOveg!d3b1yMO&u&kSxb29X2Ma`T8dNA&B-TYGW$3IqL@p2d_>$_Fd$sZ#)@dmWy95wIwfyE{R3n6cNfs08FFHS|5r1x)OO6E++ z!co2o-=abyMF|ZR@Q4yISpZC--Z1Szyqn|=TLJ$UNpTQ*uT)#TyuBGau(Y@-+2pRx z(cWkme5nK|?m~p&(f7*D9tOCY{Ld&@5g+MezngWg4{&@pv0I5=ysl*xM|)%Y&?LC& zY$nqdY{81F^s*pNlBO#eb4RVXh2Dq?{Zc1g_IIWvjAifvlx?aVlLDb(TJu znE~Y<@#ziF{y8x*q>E)*>~@DgeJmUY8!vVVCYy#U6b^pR@-^{hON>sJ9_=Gsjowkx zENbP-RQKg_GDsJptwM^KPJaGn3&Q;RAAN^ay)AAwR9k05+tzzVU=kg-X6Q;TOmY)& zvcLYJ3TGHjj(i?%i zKBY`wS@n6XBaT2CwU+{yt>my6<5ozkV39drUxjP^m=O_f@z$`BV$zB@>2LtOXuEMNGP!6@{KF~S8Jz51!~e>OH>OK$Y5?s`MEH|t^saw#2~0GIDv zZn01Vz?ENV-Qj)P0dF>aDU%7m#X!Tw2^TxPG#L+cw>)AB#2dDJ27IbXef%yiMf6}3 zw|9_+Vmyqie%4%a4H%Gd+-hfwy}A3*|9hGwl7+;oMf7ZPT{tb(Y)i&>H5_ON2wn)D z%hrJwI1>2nCH9aza_svqqxIL7b57mchY#ZY#pBnNr002pndr0Hf}=srvY8vn;iVDz z?dklYTo#Cx@InjKy*CXaAa zK*B(q*%IiR^Q_~}S?lI{1aiyBpkV_HJ0&!5b5C7TDSyW~`{`^bk6&=eAS3B#`=3Si zc0o*ug;i@$+^GIXM=FH%oNFLV`68nIKcQA2^WgR9_MPqTS#2uIXv@x^i(t8plUrH6 z!}-Mv?7}o4ED9x$aL7NauXYykuowdrz`~OCg)zm;J{wE~#GrROh~H)hR5C+kYGy8k z!|PNG`E&AvAzEB0i}t_F%!pxzBHB7COJ~>Gifm}C10w+!#N55=@IS4;C_aC?`2|+6 zLJpzW!6R|kTAIqjoVzT-+&Wv4b!MPLBWWkz2GR_R2-h%AVVWZU>Bh7ixL$(5JB7sx z(*%}^=%<}$S!6pffSoOC>vWh5X_;p)o89*-u%SeB_L#~p60CFQ@N=mKqV`_TC_wX)VyuS;VcfZm978Yg^~yU4Y)$+80PI~ z;R}*u?0@Z9tgGi1E-Ib7!n!ml92_zDZLmhj@2JwBl>}P^C=^>7f#cCE=+Cmr--!MU z&LNf?iRr*ulMn3YwWx#!5%>Gpz|=8Wij?Z1nc`N-F;K2_sI2>k7nUUDOI$6GBeGI2 zTN_UG{%rT3;kJ4si!lcE5m}42rq4Zoi`chc=Y2UF^bujoI^y5{*$dH^%l9GbTQKa; zL~7gr(IE(|*mJ1$JwZgCT`_;4SOD2sdr0BF@BPt1Y&X>76p~Gr=}p3S2bXC5T}Z7!p6=YMAG-SW#pK}LS!0%)>Fn}ZlrsreH(PW z4ROG=QZ;s$DzLys8D~;C66yfgI;~{X|g8{F)VOH?Do4)VXwD{2tfIX_4TZUA=wahkMqi@bX5+ zuqa3Bz4q?s|6i;+z=)@cuxqLGzJ+&3j)T}1`-}@JSSKTUCK7?joFqi?pbcsBcen$< za8X71#T;!a{T+T>yX7}G(`8UyTCTyS2ZaO~o$@ams!2UPfX<7PZj(EKv%Z4>H0|`- zo{OiH#355Y*y{7e9UScx)_ zdLvn^ZMw}`JU!;Zhkad1-9O5l2Pxy^+xhx#eI#ncM0Xj{IrGOpRJT9O_V$|;-;t%N zlK*n&TO`uu29y3q9pOH3P2#4z(S^`xN5SNf8V$oI*%OAa)f1k*fcy~_`)@SQM*!9} zVy$y}O@20pneoB%ZEn3BBmo&>1=u@IK;*AQP)4tjPq#izwZ6x3HMr}h6;4f$;S_xD zR8Rp}27yH8E2AIZa61)Z+MEuKo~ti*qUqUH1&E}{!SbXuLIDvF+euP2d@1f<6H{y4 zjF9_~MIG-~p!;zRyf}pR?d%Bl^JUaM3Y&YmWmwjPp)N#GKj@ib{^md8frZff);qv0 zxVTmkhaf=IxcT?TBng}Dj=DZaiSo;v$sYFk-=E=#;Rd(rlvb3ItF_yk) z*&Gd768R5WW&H>S>`BDh5&5j&z2QS)Va>=N}&E$YFvYZ{z^keS`;PTsl0#7PPz2pyHVNd;BVT7U=)|9FoIK;Rc)w92WD zkt%qd^@Bby8UR8IPBv331G%2M3#C%N211k%nrF>RqYXsDB}l#njC5<~hmKyGX|`1` z*ccN8L^N6P(OmYrj;t_DK`mYok1G1b5t>=yX;NZ4r<^L$&&|FOk{;OO0r%J*;N2L} znP~5>n_!Q7I#GH5>_gw^BW38c)_CcNYT!bidop#})*hitHY}X3>7XiahiEA$2Ileu zS*~7J`C8Nz2d`>9*18gkgV_6TSQh}d-Oh%>h?_t{!&?113b57FFYzh(v<5{Op0g_5 z9sf=56rA2#;eroq8Sm+-PUylqXtBpv9*}w>*s@`K**+E}j6g@vqoJO-Ip)(n)MScT zl0S}7K?;WtIFNKhH2^zm7wDo#bDDmu*Ufnz(e!iNl&c-hl}Zn$0bEpu2fc8}J}p`~_9+jGxR4~sToV@10&5=2$07#b}o6D~UKi422Bg-amwvEkUU zpYFJ-V6L@G#=F63IZbVc%I(AD*!wO}X6FqYZ9!?XJuZ3giO_)r+Ce3IYX)gx!R-2fWAo|(Bq2oWQ`}RT09524_H3_awzO+eDq`haCDM@SvdQyBdK;-% z`kIwn^N&>!o>ul@Ywm-3Rg8WG>96WO4SPurdr1+TgME)qh{=xu(CgmgshcNk7NZ|T znMhrRW<5gpvbZY=Tt6;RB{Hc7_~ zS(U2+5b(5MkWUj^^1s@spbht1vTFYfEp`a;WLs*=Vd$G?4tyfM9qB$nX^shxf;UpR zNc1te(@A_5yXNNQ%qU4J{V2I?H)uqil5d};(!XKsI9&%Ze|!H zy%?8@7!0w6U&r>+f}RNQYg3$svEWCZO4(p0y$B&cczL~dvPv)>z4#3WSlU3mN|jlDaWiYh zY5Z<)x3O|)o%G=&v?PyM<1?}a5XKqy!UKVMpovSI;VQ{*EF;Tsg3 z{7~7TjT5;Oo-7;AEP@^aM3l~U;=Xx@!Zjiq;Sz-STJ^oJxtUV7WvA14s7b~+)p!Ci zGPwvT(z@2|R*-ib%mS9 z;XLX8$2Pw#oTEQe@%&^=4~RZRI|Q#JTtbUh6ko)hAv3TqR3^%An;T`?!wvofzXvKj zp;JI9_am*|;eN*jpT(iex%OQ7+Vhs@1TFs~GFZva&DFwWdNvN=H{r4;8)82M7yFjF zsUYM|v6t%g$Wf`{@k^82hxN6^MpNaLLO=D;_3^^(z22X(6{Yb|MV+w)sCfDfG`)MZX7o8cQhAXvi1WRn2dPfm}5J)RP{J301Id)8U1Qd z`O7W;(YGG)F%_Z0Qk!ZzcTx@?muZMQYjCE@!go~Ym5BQb_A*z#B*?E6#^X73Iz|Hr zghJM62P*cI451jmBGjZb1wB+%&EaV~cE!=c#Fgr~lsZZ4f=Dx(%YSlQ-B*mn7Thad z*~VbA6eh^oaod^!mWKmspC=%1^D#0-;R`T+1q-&<3vh6I?EnAz zNst<|_=r1s+IB$o0dMC^Ak=J0XQcwR=t1sCo)=fN9a@{vi@ zEm(wPW)yhwUh9=@;+pldDlPm%%)1NT0d`E1n(3vgw6GfTY>QbEk?K|@HY`u$T2UkX z6hmul(Y{aV@OX(vC7{F0IScaOKzOR{&A7|1d$*gbXRsP|RzzNM1;0Ez3+vpwgxC;- zaNG14Ddk<8+>4E59c*ZpB-@uFquN&Y<%WMEL`CX0EG~!*2HW7-q*h4MpY=>Xtz9Kf za6qLtkbbhH?K@1lvI-W&0FeT^e%=e_8KawJ?YzZb)2m}5p2Rk~X#LENnPv2=wuB3mC^?)bl;);p}Z(`3UplPi&E32KL<5Z4NJc;}Zp z@V4z+yMOs3hv2eHKiZQlB_yrulr1rxu@cw6}u+Kj8tsV#WwK2(qo z8v{+e-uv+f+4{I{VxvD{WS*Tf{XLo~{%wpVEf_bqHipSRK{{>|p9C^$(WAFh={MYB znWTMjo`9T0LnEA=;*7A2=M%-s2wJk)dsEdO((A1^(~+q;ga7KUxFPi_<;J2+HipQl zLrAN}0nv737W!%z3Zm5Z3fmo?P&_piF=G$HItahCDv3@a>z^xuG-4y714 zps8Q`#1A_N&h=4DA-C#T<38GX{#h*Ie^#KQB~+FEhb)dDM-x-IQl_H?DUyI1!j3=RTUy zh&}a~CXNx2k!vYTJ%5|(+aE^8Yrwo}g-9Gcr=Fk9+ke&RsEkwwI0{+Bh!FEPYO0%a z26lin-x|?%J{bq$SLJDa<@01yb1MDDPK4N>=L9zw*?AUIiY(-N15fSHvyp_5|x(tK#V5d^Tb)_4=TA#I&78!IaW z)CSlIJK^NO*|?H8ZV;&_^?)>&5dvkh^z{Q?)PD6dl)S(1m($Dbe;GsZ zpaPkW?5*#(nDHZE>UMR0V@9Q~qBpAAih3IqvzH|##4A8`rw-tU`~1TFU>mA8TfT%# zUqWjp{S0#`J;E=kI6L5yk(?~y{h99xp(G+Rhmn%a-pCmgUw5EMIIE+@mvtMp-C+Wi zV3#5Vl)nZ#@j}rhz~0K-%rKVPgqCl@PD{0ODlzSd%`hV2Q2gl@4KlsL2UuvsTIUFI z%Vz8Yh60TR?!ZpQ2VBrMhkqxT_}D9df|$hW4ogesrIm?8llWv79c&AsW7AWGpYW8* z;A6mZin>po{JzDqJU*D3QCbm=nh{xDhZLRgSwqWQjWcIq^cUaoiDwQ5>>>-5 z9tVc3^{2F$wqCK%bjQ0B+^{~;DlW4&Zhp)IKHZo!Ml!&+A>iBhIJLT}xs&=}^@4ag zvti2dD9vh)={ts`OZJMpAW+08dYh>VNb|b4o%HmTUdji8n}PKjVt+(Ds_ULvUc*zju7W04_W1}MpQc=eL@QXzlHsQKTgU$tSOlXTiY>?S;N`9kRj z%M9@z3+e~P`tC3#;=-^Gl|?pg`EUF9hJ9+T{!Y!QgMFW>4`5X*5I|_l@U=S*Bpsnd zrr;`w*dv8YM>9O=n|h7^C7NndOVMd#h*!mEQGv`>2rkl#>{9zxL21?;)1ketiF)yD&)SpA zW&reavcM6o50C?%AbLZ+)4&=lD82nKHxNkaZjg0!cd7gWJFI9mrM1?Io@&bMmAw33 zv2F3@NB5j5P7m{++TJoorvmCpub!7fpz%O0t(rFn{YGnAg9N_Zaolj+j~6cgBLnYU z%v$-$?2x8!Qsd)1%nt&hBjmN{ewI@-vd9i`-G>@h;{V*8uyZaw!fyXQQ`H&;>SV4~ z&5O=VRSvi!Ep`!2kQ4)%Pl%a8lYUak(bqR~%_;5s9tZ8I2qSfQcyC9UgXV2Wgy@eW z9pN1w)EB%KQV z^vb$T8h3o(0$q4qtN_m@g;h_-s7fA5iExwFK!otq;Bt;n{CK+{Y7Y}#7DITMuVG^E zf8{Y6Zb~;X#`4aZT)+%CMQn&)ffLs?4%2z^nhxVJ8(!0KSvqVBCG|ms1!M|_azFt2 z8HEHkcF#RUb~0>nF>hLj!PSMqS%Aw%{~=u8EcjMq3~j?YA_weY>td^%%M0*bdz`lYjy?3)6 zHz`sSnmMK^7E~BtDeC1d`&Zu=EYl$KKhRE*K3%SF9|BqM#*q&(sruLcp<2OSl_Uyr zo|2770_MEczZ?`k)(c8v75iJuw5j&UW3-k4IY)!oj-67pyz=dE`2l zp^KHmW$gl(#GH(PV*x;t{ev%2{0P`79OGOS-TfQK?CtNA4;k@G=FeiJ!ypdc!Nd32 zx~A71l%J_(b3(i^x8e1gY$cl?SJb$p%ht|j_Y|k~GNjciFaURK>r0=PfuCK`PK-EPPq zT-0P0^1N$Iuh&74y?1kO;}l7(jPhL&Z*z{~HAv!)3tD+KrDlTw#;|FRG(A8NdKzOi zlGy@p9qy@~{^3c(KECHFV2TbM%La;I;Go|nGWDLHXDAOPVQ8dda)H_wX`uF4Tne~_ zjCRmx10z>{Z7Um9^V8QzNdClZ?Q?SeySK&_rzORY=%`&hb(jrXwRM#Y3Ub(Dm`WNI zKT~Kgbs@)e62-(>ihz*y2c??9VM~0k=6_zZZ^zJ!NDNJY5RR(bI!NvaX#S}n3dE3s zfct8qbSp#c0l%Qem#fNDrn6J(E@B1eC+4qleDknqCZk_|-V3GsUi*rJAsO1UFB~#D z_sveaQ8UniU#FAEWK=(Nysq{vYTe71T=KRie$}dOuO7RA_?1e%fe{~2EOP$|0_j2y zdHSl1j-46FCo=@W$SW zr0TtoVB~*n+kyJF>%)}0IZJ&q<&YNNX@w8fs0|^`dE+#cxANv~VP3Lz?3O!hmr2`v zAlxdUOO&0lsA8kIt8SH;8s0v5eZh+UR|qJ`v`zn2r8DHVtXFsvIG}z8CoW>1JPY)GpPQkb@*p-L1W|iOD(WIWFE83cQADnzW zM<6do3k?$Pn|X4A3+>`S-qeeO_hSHt9a915h5)qm+)FQ1ObGajkgG7m>-1DJhZ_TH zv~ZSw88Jj91VtvCYU*(y+t#f`&n-f>({12A-?|xc7~)3fO-TY8zzl0VE&C{V)JXzp zX`LWAS@^FeDJP;b2^TSp1EG*nj^ua#nIx2J;&^meOwMv}8vqI|qZkJ7$j#teWBIUe zNNfXnVYtpfy1dQ$l9-d1{LNeq;K_E|78*KxyL(=_Z^6E&aiyRbqr!IOP+_c( z(}!kuc!Il91q4gEDAT_{-H}Uzm3O>NN|%u}3EK7+e$`Yn+sR@i*k$s*6rj|Og6k7Av?I9*k3qe0(y%+iY^jr3XZ@nT8W{+&&P?i!2Bk=>bd=Zaq4uY zR1pvpOpVT%M*B6XsZMfR>Yi)g&cQ#M8tY-q(m7#jLmEIOt0jwyEQ+M9y&~@}2D{6g6ox?JhtmbuES1rHP1YKQ0L(%Q=h zASLVj%vSb=K+o8^{gN>ivD|djt?-ZJQ92bBHs1_nsHcWHUA^YQg)6UGIpY3j=es(o z@qygx4B?BH92my=F0{U0;`mG{S zn%rvq)%)E0k(c{>HaGH$bRFlV*AA0tiwv%`kDP`@c_R}X6|qTArq6w5GGkU+$>(@2 zh`3Xgt2{$FRUtey@&tFVUe9tauA@vQMT;y7MA0NP5Dp9mS!wl6+IAu6LZj}@o){=| zdZ!N_){1CGp!Y2I5^K7TXLYspfk_!Qh z7`uWkY8}WBH5uQNJ#K0~ZC4Bgj@swu{@W!nlSe}O`%v6Oupc^UGH_j8hVE9s8g?Ya zk6lAoP4fX)Sd>o*<}`Ghz5|%Yut?D9qN*(Pv}FGT=5^s@W4G1(j#PjDKs0}tQ5-z` zG5Eue+*`g9C^>J;hkQ&CjrX$j0H4HiWig2~v~E~g>}@3jI&7qoXs7ImS~To$20AQs_GoWKy*yx<994!K?u z?d4P!+ez}aLp=}T2Kq#y5McmX^R%^6ZUsq)GLctWqlQ>mpu6ayYr9YRLXdCXghQ~$@A~(aFMF~5PjWAi(g~5o0F$colpo*onRS+cnj7umVrR1&?eAC! z?GEFiN+cp0ghfx-e6O?2O`P1`U7)c_JoOlbFYwGmWMZ!wJB5@W_-(Pa@LR3 z2rC(p+(ae5CO4VOM>pTUVmb9y&IA%Fr*@;EDjY(XSkB!z-bs~DRE1Eil;T&cBFa}) ze90Sy%;FRquf7{D(O!SOax0XUeFue{9mmYg zF{r~lU+QD!@lA!#L=`&kC%P3(<;pma+CH4q8d~b}GdjtJ2{3tW+_$}o8solM#^oSK zlQ%f;z|~`>=*>OoO$7l?-5R-1lk6++&;Y}fvzuT`m|uzoaR^5uMzR9l1l$�OJTd zQxs*a9Q^XS=rd^sAuEt2a%I+8m4_3a`D;s)Z;`ex5*`pX^teqvdRL1^bT+Zhx^{-c z2Zied0?D4QVDM(??`3QTFcwJO<`77*NryytS52Jz_oo@|3ftpH2ti_6U?CMg)uvj@ z%kgJ{D63UQSY{J19AQkuUph>@0yQiSXy4guvBVoXg(CL_XD9QT$b?L;Z(8{X2Yo&X zL42SP{=Z!Ch;IRnF}}F-uEoS6-Wa>uFGO0K07)M<#v_dltRg~u|6ho>wmP|U)a$;g zjdsOr_oH}lhR$L>O2 z!m~fhZA1?ogX|48YG&FZ?)!#4ZlJ#yM)I!&78>`t?lI3{Xn;%(d>2*to+o41%E&ER z6l$F&<+x~7+4wmw66UBj@6wW2m!BT%*Q}|6+YX>yY$KpOw%_!kCrKp_|2imOryd z`$>(jDqZ4+LfKfB0%p?g2p{!h7|0-qx_v4rc6noarv~5|Zg*9j1}%7?m=1 zZoT?Pm^n8<`xh5!@CA33T&q@qK}EYKxt{;jf9aj6o54qmqU827oFv2Tt4ZHLh$3SC z`JG+WUR|`$i^5c(UfxUMZ=jnNg?+o~;J*DxY8D1TIT6c+O59xp18 z+LAo@6|yyaIzJoTs>Rv`v_sTes$)MEAX(?mMS_2@hRc(-1x?i6h{)jp2X;0)H^T=4 zm8+4+of{TkDp6lM6y$5Rzhkl{F1I`7dYkTqUh;2O|9X1I1zKxFW<;MnsEinb>@A%0 z>NdTZ-9}60*OS2uO6Uq7@^Rqt!qzOP$d80EFEUv2EO8#tGJ{ia?*RW7Yevinn7I*x zoKaS?g@la?HDdia23mqauI}Mdsda>7x6!%s)>7mN=gDlLVU5Tj zd60A!*5jwBRGI=b+c&fcVKkwkPuQ>;p3LugX{!(P&wxn_z~C5ia)J01@EHQPl*Q=a z26sTxUM*zTIQ+5#pvoe_*SM<2uCZh2V*$jSPyCF*~GZuqSJp^<3O)nSzV)l zY*naW@2m*RMbU}qH2cY4)of6tTmHO3Z=eztivl9vHAka72lmq_-jKG{J(uj$9ebJz zoN_MYzv4aE?tN}LDY%2HzTwV6RsKhJv!c1sLr% z4ak~bn7))L4TEB!dp){6ed@gV1?oKfKnwcy7G3n;)Y64y#s_L1$6OavRI87MChhq6$Z5=lcO8FQjaq))UL^?~8(z7%n2|v$)-?~qdH2<1 zRw)0Z86=xO-f7^zcUFG^BI}Mm z6krhcxg=IJE&}OVc+cfSP5f%0@4`L{4+vSm%%MJMJNso?n!9Wt1v~VCa+ppz$f2F6 zlX91atDrWpwn}wj=3msncd&4Vpw;{MV3+5A^8s7*i^R{KJciR!F3VK)X0+^$9?9&B zjaF$}8)yoIs@NN>qE32cYOR|s)OMk^SXoT>V5qcuKY;U5w4)=vgdJ8p2?kBHi8Q01 z+S_}~K;%0uT|`FW!L$hJ-D)M6HtW#v=)B=wG5DJ!Z<`8k9&KAq*@ECsrhQ5m$|m2u zWl!o%A>GOqc!zS%4*~4#O(2+IGISeg9E}j!hlbp>H+A zv^z*nrhr$dWgVLEFl2Cwp4W7^Be+McbRRr!AbY3LYHV}0ZXD)TAmuo2F{yslYe3SV zoXy~CCQCi3Ai{FLJa6k+s&;jE)(#f5fzvd7#B-Cg4?459Q)PYH4)q8gSVK6jWZf;V zpRxZ8S)vE2*iivmkAUKs7I!^<$#i9fDuOBC_OS)*EFx1dmGUwDMnIdNgky{aFH0k! zj7&hNY-@1-4J#^a4l`U&E`kQ;y`Sgb|K{j{JN6#j4~|9$Maq==4-4xt5spMO4|IJ6 zp{E?9E?-NU*6F&`#Bkbq;Y~gnDouhg;Pv(Y*s@zJ6wEmlW(i z;OZ@GH?Gdi#ZL)g9V*1WFXUd?g4DSN;LF`y*e<3hRtl$;1ib&g%&vwDWWllQU6UI< zm=idL2sQLct8nda&QWbm@nFfS1x|7OdS4O%!ULg><(o9yx&1lhT^E8{2F3hqWe%UH zyckd!^L>U(evCE#dXwD|64VMmBpjP3D9{`42klz@gR zBNb*YLTMOk+WP5NKcu=9EV(#f6H<3WtvVP$=Ti|ZWuw-Y1}8iOx;jx+sivf6>MpQp zXjjFiP5`sDCp11v>LzAUe50p*8KpS@0uFDkfWQ=aimSFL!62_>?a{Q+|D&XYy=<3+ zkL5wYKh%ieilY1|tMw_qUYZKr%y)PNPc&3QRosFf&N#Z)9|V;@cSv7!-w)oYTifSa zNVJVdW~=~>>fJ$&+W5;JOoC>w<92pLEW_30igKo^+dv0ok07-l6<5lIv~r+ZLWFJw z`}(o51DmdEH;<4`wZ;NY--EDKca_g6{vd=4RDrZM6}zdLLM!cO-@^qz=&@X}EU6kN`qJ6<$$z&a_N`bK@|XU+dtCH&IGdB%JH= z6*wj0_!4s{E}u?hkf_cSIUc5t(MeSBB_Y09psbl8-#H{p;UmOKsox!a`?XssYJiBJ zRwB3Ffvz1tH~p(>#%-M}9@y_|v$uKjXG8;+iJv_3r$94kS@I@+_GSo*v=|d9Yg*I4 zE4LV|>AKFX{)!A;jKD+`JHpLg~}SLA$z zLEH`v`Nt8T7ooqQLH&Z}_{S6ReA1MC_h#-o)p}R{2;2W$l6Kq6o0(>$azbxt=!dCNjzj`PSgfBxhyrz z$I*fy-)bDzQF}eA+N$Tjo@-P3PD6YbwJ-H7Rirl5T=mY4rNd0=zP?$tgS(Bf+Eg%6 zbvqR036czyOgmdsQ4qw7qT8|1^1p7vB-N2?#!T^39a|TCZFse(gJBb4i-nC3AYF5a z5Q{_khY@@MlV<wf&>AnMtM1u4g1@Cgoi-r`$Zgvheas6b1iG@d z>RzlkyZJ}4hhW*@^_)(C zo189?`+4JT{x$NIrfr#%Y+y=?aoWEh#|v znG*x_&lx#U!Z*eM8-X#Z{r;YHDv3^KN$);l;z15$(-K_))gn_0TgORE3VogUN-C#5 ztsVIfXba4nJG+X-GR!UGR7b7+`!WA#DTo$rSl$unNF7J%<#Hef*KV`#C_{HzwOL4Z{oD7B;jw&lWXbPc{1oLe>U}(gCMAE*>|(A zcn>_#qRQDC=$xcpR%zFAFZXH6*3i<1-fg$ElJkFg=&*rurn30VIfDk~EKt3l|xQK~|^mRWut%(_aGKb2gGeraDmmYDj=?zOEca};%0u5T`kx)Xt+ z@6}}Qf$i-<`LXpl5dyl7D1sB8I1*YSYIVf%97bxrCC*~xG>P>h=?#A0do;Ko_KXPN zg#JIYwF-UtTlbKLx3saJO8_n@LSWB!6Bm9=uB`Ld$bUoj4=Ot%bTwFJq5R&%h>?_w zjm*v;=BAmJBkQt+QO}{SKK9~4Or#@M3nILAL-J=1}*Sqeg(H`%Tqk^7I%O00B2fxFzqq#`0Fo0sbbnh zym=6AKhVls=W_k^93D$l*qyHQj6kQEhyO4c;)pin<;^t5)sFb8gx;b3*=%CBk~VP3 zIZpZ^lFCSNC~Q}9+3JXhS~dz{I#1YZTd4;1H|sE5L-FTVhFOW9RPHfvpT##=>L+qx zc2mSk>T^D6sE8HB{2THZL(iaVo6LczbaH2P-t#l$v^suw+kO~sa@)$8)SJaS&YOtv z5+rvYv1QO89u#d)Y7zk)Ng&T_4T4FY=^7qt#=CQ32pahk%}A}h$78eIRQDee%P-l~ z-kK(1?C~rY4x&-Rr+8F#MRu5B)X!-$2Jup@Y4P)up9BUnt{vo^|ArhCWt=#`< z(jjELnTz%BQWlSXX;KV5j@rcY?*1SG?kaOX4*yjB^aE`!(~J`DRxH&HspY{~ZSGXE zWvD7%n;achhXNyJ)8R$R8D31)EaA*pbhZ~GhyFC{JXvvJcu_PS%D38!wV)rcc)tqY z)mlx^XLa3(@9e5>>6eLjTLNvaXR6Nmb;~f_j3Wc8;bM6pX6~LmLz@1@ zFV!pmzL-G2?BnGAFAlISY7>KpcFW0X=pp*_JJVxQQMgptc49K42@?rrufI~<0K4n0 z``g1GD)3{XkNi8^#$w51+qmGx0IdD9qcw2Pr%bv-2MOym0oGVBoTrp4KF4jymB9YPsK5Z^3sMe9O zZeu$n3&-NLdR86T0RME7m((ZNs+yac-5#Yx z?UyRr2lZU>17SM3QJbI7UGyu-X<*u1LtD0K6xd>7KVkI+DvZ3nN-Ol7F!`RuF7m^^ z)@N2Ydi|1BaM@#g#ROGn^X#55RYN+YtflO`Wkad9oDz0dx!?Ze5*~3=eSPohY92e>qAZ07!B! z@J*p`QG5q7gjwD%D(w5vszH`?dn@$e#-y6XGvFxRbhGh|aZJy6j7iiFy&<<0ED217 zW(C3G;`7>{vf*jl>~?gLiJ`F}TD)mrjWf3Jk8F|OT;DPgFd?aC>f<;Uj+*4rh7yBh z0>KS`AV%LlbVp(KZ1SJIl_Q~al@i{iS6Vtb7x^D$W-H*Sy)AbBgCu!U+I80tv>fBj zyrGf<`T{u0rfo|WBZJk@9}z9e65N<*4&@5k)3|N<4ks8h9v@j8tr=tizVC4n{2Npe z#)PH$Bd{YB(DMfqZL|zq@5&G0{4KTCK`t6h;)=vu-wo5cpLCQPP!T4W^-IpOe6Sd% zb6X|T8IN7d@fIB}5-4Fkr%)#h8fwWE1*WQr1?6&s6c6vvxlXn?6q4*H98E#vFtZ%j zBqwtN%&>J7_SgW!+av3+I=M&HC$D@i?Ybvx8ujo{wH*_TlIdv{sv|9x)Kpfhsp;ga znyP-8X2wURAbXJ8E1SNeClpNb7Z?sOfU;Z`#&|S{nD<7J@_U2vE-_I0`y98d7?v-6)sg{!EG zoVOD>)M$zt2a3XLpzu?D!UO4T`7A!YwZadc1|}okcA>GO2xL8I_R{q#k!}UXa^v@!5o3Ld66*0QIuU- z!s-`~N^5$wzJN9sZU0K~G`0|K+QGwAXFLM8z9*kL#RxA)AS(;&juN6{G^ZyMvBhFg z`{+|Ewf1VZNLp@0BeCp=>thw}kNF_}zwE;q>?H8RP%?c( zli*&R-O9d#sc=>V6+XEQ4>8E z`vbTF<5RL2w`*kBscO6^NNS^$PcJho|Gk1S;L!jG}PxnAF`ZOP5=$ zbvaX~rAhH&cUfAQ_Qq2smxs`n4(!+-Y5$vsFQZ(g6DK5yVjB!;lLH#`{MVGB5RZZ= z5pKIe7b=mOkeSZK_|j4;aiF7uz<=qvRZEYzu(kx(&?}HEU(CE`mjO@~gYuR`caFa8 z7FY0e$Cx|>@o4?Su_hQGcOIR*wxfj4D>5?`R_T*GvsVC4LWtC{@^D1*%GXv$ymaNXuvlb|{R8AJ2?{jK7!|qTGcSAl*?Jtv+MJD^ zWXqV&r7DH@QKiQT0=09l*t(WvG$?z{4vx>z6}(^wi?{|N=9!nu`35NXvlj$xWgDxK z^@jqjKum_34KNU6Aa(3GugAWYc=MJ!_(M>F>KUoRmf95NXdO5)weNY-u?*KQFxqVBcq>+%Z-Lrk4 zG>njCwkyuUhb-q7wlAs2JMF8LQ|1CRl>k8PW^9us=t?vQ=<45-RVzvCeh3Clxc7rb z%(`()!Zr>+A4+Ee^)6SJJU22#cbPJ;ZUwv3tUb%>={HTaHx4(1?|+X7QZ!X<^^C+A z^SSa#Vrg6}lVJ-JRXH#jW9ldryLwG~bMt=Jl?`j!HrrK+)y`mzi2h%k%{pY1&p6Cu zO+2#VKdYhU5-~Ig?VwG1w zh=*^-tIckJZ4j;(3j$%(^~rc#F}MN!dG*Mnt_o7L58TcdpD}s)<3sz`LBhq8|3^L2D$r?s&+BF7XuDX=4g(OfV8jrNk4wEu-dTh?zO`MYoQV@A zJYRT;VfzoTN>o?*h%?xx!{E-ENJA6m*L)$;pC{d;<-q&ckhA6Z=f7Z9Hqp$3-My~= z=Rc_@)!b2hpmfCrNeD!!^U$I#l%gb}09ZMfy977tITrG`Y<$N3@EvQW&OYow z5;+D!NB5d3F4_tkY7Qq4$3p21+^!m7f<0R?|FHyW8X>}I**FJlL%Uwflc8*WhUQ4r zE30uXG>-__TehUY`nm|rCwT+5>Z(SS#AVT|3PEK@ z4?vdC`g9TzwWVyVhkDdW2Nn7>T|*{=+;Wxb$Cgbtv)T(%t}WHIO)i#Z&3YYe$fUJD zvNmd4od(B%u-3^Y4KhfO^a=D0^~3J7_srAQ7ChDRj%iWa>g=(A>VeEh zHJ2x(rZUC2yfle5@K^rnGXpRl!tBPL@^3rpks$R_N@|$dkz=|Wk48~av?Jp}gWiJ1 zy4C{Wp(HOpH{b>GL=dxdprkyoA#N~ShjyJCuhwJH51>OE%E4U3`Kx+i#fOlZQqRdM z+tt=IndF4QNHEhp@OYZ!8BZWURfCPk7a`);A;*k0vPifH!AYB%^n70Ew3Ub7mJ)%^ zNQigj9>p)!39uH0D?* z<~6bA?sd9fhd*VN16h zFnomM!)>B?EdG4DGbWa1^>qpw9r}0&%5`zbaV(9*SjbcWSFGQ|P#G3F+_cytJl{fw z{#v!2F@-p3!b^_frcl&`!s{JN`}oMc9(pg#UxaB6rJw`b%Lom*5OdXZ3WLidhlu&0 z84yesY``GH8eq6^gYf4XBh){F(_PFJQU^3tnbR8dE2V%|Dw*nM1;#VHLV6e z!M_mI+Mzqm0`L)0KV&84ZODM{V{1yRfPOvYI8pngGNaV*&YWPqdtKq&Bp~S?&aV5) zT1eEn;~~g&+HXqdI^V8-PrZl@Tkq916*WbS_kk93EJHm=z_`~;1eaRFpfm6i$0@ZG zdkGz2@CMYeMR6ghg#a0yBj8HdU12fP@n7fda?kbc{N~@Tvs~YJA%*cmC9QbsHa$Y7 ro}9c8-kk$eLZrKlO@FM9vCqar$M8&qZ+{Pl~lU4kbqjNO!~N2I&+~Qlvov=}t+NhQXxX%_13xy~!^Bz;|VB78c0002Ow@mj?Y06)#&F>-8I70Dyq>e*-Pj!6p*`Kvij|C>aM?pFCp)S&esz zr%%slw-yvuu_a^2=$ELva zjAKEYGn~5zc^#Bq_=#ED-N|a`+)U}4wm&l`tDL}ydlse@j8I$RlkEj20QCQ@{`~*6 zQt$^n9adyq4B`N}%}!wBzq~ynna`{cB%My@S1YKL&7Iy<&bz%))cP%HlT#`zlJYJC z5xMb~3(PK{){nSS9))|*z`mu9gT%&A9-SEqPlXj$anypHpY zcg?b$&x0>}Pz#8u0{W@mXS9s)*Zp^%eA$-BL$)OP;ftd8W$Qg?lEK3MdPz9v4}GyP z7A8|-_0Ixh%stZ29A~Y{=j(w%jKSD}LBOs?%k;U!@GZoP42>Xba-XK|JB0oaJRr*8n9U_Vd={7p&-Lgk|NB+u zyb*L74nH`5VI{44B7ve|ips$WNu0zBygGeeKc~IaIhzapBEoT38JZB>a2e0}fMj_# zmfz`{>hIq1yb7*;WIf=?j|e>H8z-96OW*u?*L^UVQ9O0_%+8eBpJNcLFm_Rv_pAkg zjz6ao?``$1Y$mWZ{;g?I+#+^HHF4evQFUe%%hjT?H;Ey4<0zEFnD3b+4oj8ZG&c*pp}^H#+t!yirhA1WAK_W<@z46R z25>PsS9`kOdR8e%;#*q0G*K2+X<%b>H2pEHbo#+JmR}O@A_8F}vUCwXp8llD=4>lT zliwG9DKu3~;hhII&3IWfGCu?-1nUU;r-TA(r(U2$@p(1L{PAWKffrlo5Hgi49?m0) z%1IJaaqBUWS`UZLM*IND9zgkz7tbTPM(0B4z}nEZjanz~W%l#G=+`L7o?3)q8T(70 zQcFGU+?T7=*m z)u*7F_~R;zL5yhXVBcspHRBKzl|tu@!12WPQDDlANzFWCg(&W(Xi@>><~9E+{Iu)Q^aAS9wfz(JmE*b8QCj%?H;tKhc&oJtk2P z^8hHIy~n&TrLJ_Av_L+JCBX+4?Zfc1ZLoW226V#G2*P=mkQLApdY2QV(T8tAb<27u zDP#i|HGU75{M#$+G3Ned-iIenn77YIf7h|IdIzxNb@wCw>i&dAZK^ECM!9rCoT!=( zcg%)P3{6{_bJ=wHVD4}#IR0LvbG_65_}mZc$;Ah>-&FY~N*2Zjxnp|M0jO^7xGV7N zh>e@P`apkmM{J82mnWJ#2Eud0@wk>h+|#yZuGg{HZB1j{XS*VY36FwM0-ah9Iq`2P zQY_Dx+9UA*6y5!c+cxlXVzz+({?8YL2#o;H{Il6D3Jb6W>_AZ??jOd)=rbn!-~|hF z&SUm`2G$FGo%Uq!H?9W+pXe2xp9k@R6PIXKRR%VJS zi!9~*{yRYAe`{G1Op=h6zm!IGi=4|@PaL6?*-yQEr*V^8?}A)t{)!~aPZe%RDv&27 z0NNPxKeH(YBtWW4i)k`aC`@;POD$nc0Fho^f&XYVrIBUF%}*o3n%Be+si~TyH2X`f z|GrL+wm3z4WOG?Yf@o2lVjyq@l}0;^GP~6{coO|t@JBB>MObg-@BR3&NDW1|un+}U zf=tbF&As*8x`TZ^rV8lkDb!|EOV4uDH=|^H+D~sr7dk%+E|C^XB1eq1xPB&pJrk`+ z%*Sr7|M0dQ2c(}c4gT^+<|UsFvvG!W_B<+QTltEngIug_A!s`qwsb4-xm>n3x8E=g?Qs|2nJ# zd&m7UHLikr=Iuh#=JH=yVXV*sMxprJw6`2T$XeY;%Dp%!OzR!JD=4=!u{DnRHnrG?0eHCF$zXFDQ;e)tL1O}q37pJ5ZR z6c(wFNPCy|?>>j6KrRuWC#HV(rTe|6h^XzS+x#FzgN;FEpE4rl(>xhN#8a9ioS*N= zskAe84&;k59*_oh(~|!#M)|3l8}Csla6~VPhd>LJ_A#S|J65L@uWeZzc;;!g~YZ z9sS6{BaVwr&TI;`ns)XWA)T=UKG2b6KM+6!bpj~n0@0t6cQxZ!6O+HDCp9&PS!?lj z{zcoAJx9{cfda7fgAvN=M*yzZBx3W1zD&m(&RSHl4AT{<-VOBFymu~}FAlW?iv z!#xx2h84tdivUpPijTn-BW7FrB>cDc$wAM@Xz+ORbuF5p|KCP$o6;1!;L8$R$P_!n zoN#ozFi~C4Wg#6xoG84cCuT!MU>x=j*6IMY?A%v7rR=$cm3+^XyHmg9u?*h1dS1)~BlzRiI$HY+xzIwHw3Y!sq~yE{Hre4(lsj#=psB#uD+S&u&$ zs?>}V-j8~%1eQo1tWADt>+B4m@X9*sy(+eWg8FW-!XEZ&;J?1L1wB5}hCTmwg8y8$ z8So{x8W4=QAhN!;3cJX+fsGb(!7sB9;8k<-(FZ{JnEg72+-j)?$-yngzS&}vqG_L9 z5>jYt`-_QBnLT^#{ z5MV#*`Bq~G`1 zQxuJdzQi{tkDeD~Dcy%7ImbBibJd380#N{ zjqhkqYDWblZ!xeS34!UKBtTf|frL9l3!4)B%kn-mzCGV*|E(uJoY`x2n31a6kqzwBimK+u!>P z?DPwgrM=(?yZXrmpQwuAo=i3|H7Q6vw3WQ?D)zYZu)69J{)#B`QED8 zy}XcLnyhQ`?JvqICE$rh{7JGzJUtl6p^j50_i(b5k5?oxpMcm&qCYTU3M*6mWn>f^ zvcFx(X4L6(MxtA`k}*xKXNUL>mivcW|Kmgkdy4~=?7dlxD1ef3DUErBceAqE&2M2I z*{lRN3JSKqn-_hLYXk*!r-NxJHC_+bq?XeD6x10;Yh?=Qb-QwMH}}e&HwW7=jOdjv zdj!uafmf~%YH>2A(`TQX?yIJk!#N=mdC&pB1NFu&TL;noR$cA%c_a}ik&E@^dI4i? z@_+mbmV3M)y6H*vHW}cWF`}zO{8yZ*ja=8VMN>rkfk4xjaUHdBgl?AM^U-Q$ryA4N z^5Ubmod|Cu9sd&vJk3r=Z5Igz)4GeTxqqJ-b0>R7O`Z`4qP(TYo$nIJ6T3k(&*Q1< zk)a2H_d_X?@S8c1s)lUxV*6`j2enTUS_y+|{BFlzh7YX6QghEUI)mJ(GOXmZ2YTWK zdxJ0#Tr$QhQDf+pvE9S|S9ZVl$Fh2LK1oRvs%o%Iq!7mvJU^c-?@YD0_!<32wb(EA z5?uyl5oF$^X7-YgP^m2`_eTXUwI~~7?X0dMVU+_P-;!Rx`t8kKhqqlFwaF3binzWy zNs$UTIgd=3A?eY%vW62@146R!5g2hAYM2mC+S_BW?J4o*ecHWBw2S^=aCC=ErS`BM zSfWnf9hu=?<7-_o%TB0vldqQHT`>Fr8O$?$w|@>lJCA@2R-?-W!le4{a_69#R|ta~ zhGZ%Us-GN_^C54Bw!w_wf9*p*8Fhc4g{hl<{Iqyt-%Y16Q!_4jqHYmPmuxhopVz2d z-iC!90COaJ0OF|j*4Q#S^9ak-KpjgjFRVhdCy{NxbcOYg3 zBc-!_=}o(-t(KWM6N|+&+iD?&HZ8l52s;k~o4h(ut1JF-`0^dY@4P3Li*T=$V4q{X znc{7jBq)fyt%69ZwGD^*{;9E~1dJgWqct9|^H`|NEjTeio?-1|-fAQ=N{{*1bnKaR zxI|h7q7V-FDPASj?3y*MI@F)i)N?7v>r3t(vMu#OhZs6w41CdYa=NAvixFB4@4LPc z5g@bi5PBbGZCKhR7_0VQ*ND}NXFl#`Jw`y<0N0s(cKExzPZ#vH{jJ^Mc<9lKi{Z78 z%7nJp+v3)yt6Yo-P$8gP?p+0*PKD4UuIke7gP&Vw@flYB#J%)?SoyP_ zSRtEWptrhVS@enB@6B7n-6yLB{gSlvh*JXX`7*DtP~uBG?q~luQjxX{Sd%*wuM<^# z!uWlBMc^=CgpCPBaG!|PD>dJT!*hjDj6;pl{z!$-+N=MdKam>Pm&i5CG?ICWLF3Fj z>g>ydCPZb$@r7FpU)58Y1*X__`-gbJs5q^riD^)BD=405NXhtMgA%II_ z#WMB)FALqLbjrdq-o%hv~_4T*B^5O>( z*|j7^GXj-tET%F>E`1b}r<_05L*`a3)IX3&oXk>`^7zdC>&S>Xj)$eZJwTDi(vZY> z7)hMx@BtN%hPTJHx32(rg3gBCzs4>)>ls!%e<|mCiu*|4<_({~EZipa`0#OCuA6vS z?|e9WSvMQ)9qcjJSMFoEKSIx8M4c98C>Qd8OS@|=7qZ9x!{U9juU#S>TwoD7CTWc# zEShffKK<)avI>g&cTuIjJ24;v)9n463Ht6BC4y2jM&>>MI8}CetZ1{ai;B+c=wy^T z^_CQFlt@|-gSy%gyK{^l^LipF?+z6m<(@Z zB=!|-cuMLgy*LM*XMf-03Kts!^j}}FdRlCME6LrMBn5x)KC=umg|- z0dhLn_YL{LK}qf?uC=N1yEbKl!nr`}P%Vy+pwq%nniVPbbG^V*HUU*~YfZ`ec5dvENom-lx? zCH3kCi=3JmO#mxz^ODWVek67jB0*0lUwPe$%L+Ma$FGWd?@x*QA^rbI)WzL)81Z(< zjW<>vn>)unGT(Y2GVD(0>2Glp)U_;(@JkBD$*7uxts&5Q=HEw)o;ltbDANym#XN$M(aav z_=g>*ajlXO^8y&$CI(+CGkuq!uuXJ(jaL2|s=O3*xuJv=v5h>bSOG02KbDwlH;bGz zd5mR#VR9UHkU)nFMU1#t$(_{A8Y*Ve*BBs&(BrTe*S55d$NeJ7zZ)NX{zwVK=hM|w z#(QO1uW$7F9T!;vKuUJyRgz1bVf59)YC|orwz{7=GnxJ85BY`ZWvG#P9On-aSzHeN zmpvSt4kVX)k3DDkgUMYR4{QpE5l6YmQ_NXl$%ta8G_4gWozIQ4psp#QS9#aS03Z^f z>?b5YmxYFerp)o=Q3Fp>2|p6+p3@Hg^9|zBe*nWDu(WS~F^dlwp&?hpEht?huDZT< zhB;&{nmxXa;lUWcXglwT>OjJd?`Nq?2h(@deo?~v+_+=ouw^||sA#tbCz-Gyg4=Rw zC0@i7jkYJGQ!HImH2A-pRY$??UHo3w*(%cwDp#iqUC%K15^py8sYk^Ow#fls@o&!+K zlc=;wd4)*@o|9)z_`~)p*T<{=?z!G85YZGl64-Yy(udf~ z|2+ZAdt~L%sCg{*PJ(m<_E3Au35G)=2aIyWn?T`M+u=7Za)CFUt!3fQZTEY`TLb42 zkB(1|>NW#S5%-)C$d7X{>g`Y>(8JjD{Z@Xd(aGgc>LwU{le|)SI6mlpir~M3*kFW{ z&G0!2MjwQzv0?LlltDgCpYK%kqp14t&!}4}nsUqKlD1KoT=iw=yP4UclO^xHb}lGN zJN6MJ%^suxBlMdzKB1^Blkjzf7^*vOxL4VP0C|jUP9) z1~!uD-GpTS(^^VX%kn;@;_WG1m~W7CFf?I7yaGPvy`HGb&*52Jd&ud?x$ z>YgrX>5l7vIijhUT4NC893XhsYFoPl~x{RI<|iJZuulLa5o^cWy>z zpgx8#c9l7l`85_$ykcWcdNu=tj^3)-cB48Mw)HzvgShAY3BqO8!8*Uv zmD#;@AYB>g+=Az}ir_!0HI$tr!4;?lW*k<1ocqwixVe?UCBQVWw44DgJXVLFD3AYB z{cP>SQ|F=?AIE&B&V@=N?=efegVE;#Idw)-NoJf@6K==XG%*fWVCHEhu+L(wNQ$P3j%U~f9K3is zM1b^(-?V@n;}7`B%zIY{rUVz4r8v~kmHya+90os@8Oa*!%JrAZ3aP!ZU@W)z|ANWb3y+NOmL?G7;d0pdxU+@$Z`Jf zF_VcHSKC>}3|Wmh9=CzQ1$Q%0aFfUWr0wRNf7rM+avu3ad3MFHCfGmjyHe2eywtSY zP!>j67XE}TKzdOYdWg9dc>uZ?^EI2-3y26pP_@nvV=gNx#Kd$4IbhcipNuSJSdM2z z-eX{qWa0cb?m%Y^&lX{ERGNx{l!5=7mM`y-Wo-mpoc9mY&sh#UgvUsUFO41urTMA{ z@&bB%-V?uhRIro}e2r$iooBl7aBOjZvAMlFQ7U}ho=?gj*rN22h5R23Hdl+$1GgSA znov$X_xGyp%MN@1xo?35C!PiTUbtNEzSl;z5{$q5XHSIZ&i#Z;*U6=5(Du3F0}44u z(Yu~q)@tw}btcT42llCc9Gq_^yl6-Ylv>EUPC6Y;+;`Sko4`gcvrmTRlj{* zT!qHQs6xcc)&A`fy{Rwo0=OJplu7cDelF8}l31Ga0Zho&$WXi?kgn0ND2lgru<12Zbn}XzB zYKUV>Qm)x|V;gETMc#gN(0=saEy2hezMQ-qRzW`Mt~b)Jb+q^8KbJ3$zZyRt7xhSL zS-3t3C*S?RK(6zLHsR#jm}1YNT#AdxM77JgmS2gj;nQat|Gl`{mwe?m!f%hKe!q6s za;KFku3NCS(TLP^du#8AR`eBrLg?$l8=JV0(sfIVB+j?K;o?Q_Y5H17#VPk{xdqiU z444KhY0`f0IlDHhDVvZM)uqh8HAy~O<7MJg(KV%ufTxu4m46Tbn3C=%e1d1Y2>)jS zask-dM&kqaxMs}hVu`o^XJqBLq2wAFwvwlD61=Wv1WIH@;!-ecr^jo&kM3V^#PJbi z8R(EaJrMUL+aT|cS0sMb(Ug+{nm(?kr2jw{KRx)k{q$kr(L(N3@P=h+avRRLm)koC z(J_hcDbqm9k*+w_KZjo(zS-0pmEq9-_GYCfHTGnN7Izs_Q==Zh8A2-8%9rB?$IYkSFvi#b&J7h6KUdcb_Y`(3dJ0e#0mB z82*qFbfslyquv%B8%YO3?Fn9#ZA2h4A_puY?|XeBuWrxhx0jXmSvwb=tXfqM|TaqCct)p8_x+5G)YL{+xY;bt&%km8ut{ zf3Pf~Rd8L25O%Pm`{CwQc?Px8a>CuUy170{G`bk>&J8PG9(pAhbJ{D~kpj(7tC@(1 zNZq_SFCsIMFhj}tHO1X2?HqU)G56-ytRfe*nj`|lL!j*6md}jBt6+Jhc7YD zgGeH_BD?|u;!{!xEK3-m&aN0vp%z6%8w@AVgZ=77mZQZuQYc0^DeVby!x+vEooDQQ z2zP(&2f)bt7?-F-BH~zq5#SH~$VY^*dqml^$ zMcaJrVPL68Bc)i+SX0DJSzYEo%H(5Q z6#1QOF?tI@`+mVD@{XJ%s;sXaN6%(MH7OF;iP*Cr2SS~$842YdRG_C#$_zSdnGU+m zB-of6y4NQc&_|YnWE!f6{UoW_IAj3ZVOPOV*TqeCpjapkr@q0o1U7NHmo(FB1pK3Po=kU>!`Sf_r@3)Da-O|5rL9CoVf9OY?Rq2WBwVw0sPYp^zN1n2 zyWx6b-iQ@zd>HLM3bti zQC0oU8ja)8Pp+n?RI8@sjUY`-S!7Xj_44;)8~#Qp=+Wsj>PMP+_ubxK=B-#EQibf|iqx-i2zEvb$zp?%LGHI-61ZcK4E zaE4LNU|Bq|5O&bwe-73L$|il}ngw6Z^SH_SVR!4=j9({xr2+Yo>I`?!&r7EDHHaS4 zuV|7GbK)kD0b=kbSY`;&J@vVxHZvfH$`btb1t%*@#B|$==(0*h%nXdAqjC$ZY6W$b z`RiF+EvccFeqy`!b|idmS;6H_|7@L~Vn`Huk}LU^ ze+dhKQ;nLFvn#DGRp}C%6~SAdaEbApHpIQW{NlU&LAo~mQ8lZF3J?4F@PBE=SVdDL zmR=8BTn_nYmdl4A?nkO_IAA=lxO(np=7Tb7Y=SZLdI!{ylj0YduajhWmuZqTTz>v=h(#5OqsHbAQ7t9g_Uu zs3Ba7I__c%EfbsVPdsS-)(op#QO_2x@XLyt92Ml#f%O0od1;1`LOrHQLJ?n=cVs7@ zugaH7_D}R^st;NLa>C(}WreJOd+JA2X~L})il0hq#J)ufpGt}oobE2SFUxM9uFSeG z&9!uRo)sUQ{-xmf13o!|VkU5ML?n6{fBV&pziv#Dy@+;+Va`ud7&5Gs?TjJ5%yry8 zfDrb<0r#LNDi=B0qepjMm>hhI*W<~sZ$2*KCbz$G*aajYU#Hm;C7ZUafR^efz6{m- z?6l2uB8S5LUKUPfUsK9K;si&2DNweRXgQF#EWoaz;lD{%eZS7l+i|9B7Y>ZZgSd!? z<4)GAMIfXei7l0X9}2gh|A<|K!_4={lBy)=>RT_>{Okl;+ma__#BwUp#WFAMswg<= z3GkV_*|Z3lzmi|EVO(EbI>r%ja>uidfFLJ)iMfJ_l%o1?5>IeQUmqsZK39nl0Pvxc z-lO+t@wu9eGodN;L(Nh3J%bK;pB##YE}}8eccu|Px;jb2dhlK&FK$V`A1Rw^2<`Tj z<%7bWmBD)_37?L_X$s|2XW=gG89JZ6y$IPt(`};xD{U|m-q7!#-0eUTU2(R(G1zEp zm?L9V%!$yZUK|5noj-9{`btDO5_R7E4=h+;|S7nd+_54^vNC%NAh^HIDtdk9babRyMT$=(}N_w1AnqlEeEdLux8 zgW!EmZ%r4bdO!v*AO|@U zZc*&z)x%VCM+in;1AeU0FUZP$2I#Z@cndXkK#T+Co3;PcxRyOKC#E8&^uDJtqB;td zI`AOpB*5+c7Uhhd^e)UYRm^HihoCD)TyxAH(z=+k>S*H8Wxg`|ihbVK;tGlt0$xbHc0Sw7TzdAH88PB`PCh}Khw^YYux&U4M>xQN!5`)4PwT#f*G z*2}}ACUL&`u4~dmzw?$`{D=05-U(TCv&|iTkeDjA6L$vZoZo>zr>3a#{@e;}x?ySY$p(eGLY4j;?fh4DIW(%Y$mwF& zH=i1Dcit^6-0z%a>Um`6^~u5UanmZeQS>U#C9u8C>|uX@sHgHNpn1=?<(t{gNXaSV z&e_BhxU_3+eQ3#bk$iiKLfAvxh zH$;?1!H>!!NA-7 zgXdUtrw1K7l6P*HQT11n*+NZQbUu%7f4~Z`wTPtWxU3Jcg0CIL9C|h=g>?cI?x#KB z3#Xu+>nNUf6YAajQVoWctqctE&6T!qlsKFg-tZBz7pFjVCGQu>ykB#f^JUzbr3@## zCV#vn;Gghg8csxV!G=K7|C*{41KDK`IVS`hdAgoxieN~81!Ly}-F~J&9>5)!dklZh za&&E|?k;Z(9HXuEVDR)*(!k;@W#EB`21xZJb?lOnwWsG`s73e9J9DGo% z&evcI;svl@u`w4Fj4$8@{ecU$uw1q4v13pGQU~m~nARDRgQ<4RVI_)CO(o+1an`mv zk`hb8a1Uv+t7HSi<=9^JblA~yf7(ZCn`o2QXjB(;R}IRU=3Q99FJbf4?Zb<*FZ`cF zNehgVQh$*CA_9)Rui?(|`)PX!rF1Klj@xetH89^!y8q>d`M!OnJw((^Vx8ov9^AbO zfc&AC6N>$M_ixEW=t++ z3~;sJa#qhyxYIJT$;B3By4M0}#wM;`{Q6_|Ne)D*{w{vrDmSX-7M)@14`ha0y**DA z_Nz34p_l{rj1hKQ5E27>{PM=nn3{RuH`Sbc7*A*-9HuD>OL~g&Mim0rY}S%HfeVLfVZ9|t7t+4~W|sEQ zuDaz|a9p6&Rh(Fr?rrW&jpnPvD}i&#^nK9W0jN8VA8+BOuvVSUT;okcq>SJ;xn-_; zPt&66UQ4$U#X7atI*WI$eWvQ7%%|x}=MBpohr_lvhLC(sgEF0fD>v?sFNdI2O|hH; zK++`I*AqNyM#Kcdj@IC5_Rl`uEzxdEl3&ok4_2?a&l4mnn2ILE4q-+HmimzP6>fI* zI2LJE^EZ}>g1bj*2{!Ah8yEaIoR{~{@EP8T#NWElNQHy3PC!d@=PN_^us>IBJB0BgVfEJ&Luy9} zHxmPI4^;Rih(>mAN^w&vds34X%R6MzH%g!f4jHzR)IqXqgLA`$`T$J7dqYBNscNi_=2e^NGh@4jO30fZ`dA@;eNh$l6mGqiKEeB z8VzBml%*E9qOaKAGs{G~5a)TIc?LL+RTP<#qmk5n%o}?j2GeSSPJIb4 zICNEWF_l}a5U-tJ2h6^J9j05CRI14T_)0vE7ynOh4*w~AE0LG7%Ips5|B5yA{L$+_ zXn^M5k5a5nou`cBL6PK^^~*yGb{xYE2~BN0oY+O)1!O^YD#QWleqe+?{db~{-T6Tm zZE_lm&>!>CQg!hzu`3gjdJdFA;^RgG`f0n<6oTNWvQ!)t|Nl}dfL_Ed9Y-?&${3P@ ziDWz-81^K~$#UiqYZYx3V*|`mepd&GMVCU#JJDm&A-f#2jr0jom67u`cJGCsBE>DTpYhmxR z?}4|&pPNti>juVm=Yu}oUImEJir{rLbf~FV#+h=274=l{+6OD+czFcz?tN8_!G=Q0 zO=-?DYt*TI^N`Xw{%P{#taaEG7Yd^(;&lCft7&UgSuipqRfIsR-rszmBxW>cTFZU7 zd1V7QE%C1yC`Z?jmgf9LK-txwN5*wZXx=d9#}MJK{QZimMzR}|z4s&zzb`2rq5~3{ zFH}`XO6+z?btR*jX=uN&G0*Ect@JsGy#6do=rzHtCZ?qG`291RLTiQTa&kKSOmo|01olMgXj^?r0wvTRrldsVeF(@IKebUs)32Kpu$ zQH)$97AwTdD7PB96jClcbRsD&|*`Mq`E zJR$|YBub#tfWzOLlyFPD7q|HS$@>H|Y_Y>uU`cjdAW1VW7@9eTEkmF3e2MoDz;_Fy z_ht>u!KZ0A`+vBn^v2IlmFwmNl=bFsyZ9U*QFD=6t=Hz{esy z$YhxX7jz8)czksjCY~q|)8m%ghBNS&BfI5x{FifMKMpnPQyRt$-Nm)h>x7n@(64$| z*M5+yG~Ae<7Nzda_F^{B8sE%(?(?Ls@14loZ4(lbjyYMxrZDwX3V1^xGEJ9hZKyZ4 z9Mf4(*4jmesm}GO@(1nj2IZ9iC~H7z1eyC%KD2C24U#r$*zL?OL_FeSBuSX23$v0a z><>W@-|xwGz=yXZ6F;PK&b0jkN4XPn1hP|^$J>2T1>`k$sN23~e?K+tWsATKcoA6M zCW8~xK>2>Mj>HqE{Wpbu=U1X68OA(8b3#{NdQ%UyX7drUa?A@myX(ZXG^4ZeJNt^8 z#FU+Y9I&F2qOKmO#hkH8DJ7HCxu`VnU)}89T$(D)!PGh20dr$=#Pnq$acGK;a{~|9 z(N)FtGZoJdX2Ng3S%rCV<5nkEj9A;E8>h=1t5X~;My_vZ4IU1Y3U^NaZiTkJvpIZC4{Kq;@>+WZjn3{a=ehipAbuWhM&7Er~1 z2(eQm97S=##6s|OcE;cYju|EZ^$NAUc&l(7Pj_9Q#mNll{GeF#{o~}d10W`Xz_QI4 zRhBi9)8hMa;_1X09dgDRs@2TgOm-z+Wlr}NJEc;sK9zTv%w71;$TwRPOX5{9CDnbN zeU~0fo)o8jixvN$AMCchDNJ9vBPFHc26!NsJiN5PDx3F-N6lP2tw+s%cE_laXanK$7qP$$Ws?n$dBx z5!?WDh#fYz^GY76u47NUr8+>rI(cMt0=GW3@sbWxQ4+_(?QI)F@v;Ed3Kn@z7U}*$ z>_{RY+L(AyC>c-?z18=Ey^`yb>#(w&zwc5r0YhAP>kg2zVgMc(Z z?IVE-c3adv!V3G|;zxH=uV%T{=W88s)oTN`7S8?5oB=rg#XcT0{zc1ZiEIArfe(X8 z&KxN^C0GCgbBJcHpZP%c^q9lKF`#>=7-{|3Xc5Tw z^Ml*t>QSn1G{nW$*v%1#EgLd4oL}XeM_3C|MM&via!`V9$akq*<0qqC-+IS+A<}mbK`s*2OMN^5Q?=3>F>{!pR@6 zSKQWOb-w-qFa78Lo?WyEo=8rm-kdG%iEb$qt$1x^Yow@79>4|VD(CV>b@DAq6V`w5 zk>td~OHHwMvQ0o|7x8D$v^})*OdxVKwHvN;Y-Yy5zwu2Nn?@^4%Dg`c>{F5W6?OTU zu$7Cbo}omj<$xbMz(yUOXK!vR_}mz_f7#P;{hn$-?kkM~-+tU10F|egqJtZHw0NnI zO*h5l8i1nuaDH7s`Co&W;-~-Ug?}KVqnP|py=7dLmZ|M%tBF@@prN7ZE>OMttJ#t% z5-nCubjFuLjq8dAHAs=Bt?!gc`@X*f8WW6v3Ll$v5kN-Qs^T7ns!oTT^#1GhYa(n~pC}yG$JUB%A^28j-R)Gsc zC1!@-+kSN&L(gX@kTS&XrnW1Mq&3Cb9~R*!@L<6+|29T3ZR$QmXJk>}c0FJ@?QA~s z-L9qjEgIDBfSsz{p^~D5^=tWy1fID7-E;6xI`g~>6sCT0MXdCpOnZQcWd&<+8w5b2 zAvf|R(V~AJ*1j%Zn|iOE?mj;8{aFfe_;tdaM%iUf0kh_p{T7{``O3prN%pWHB6Tz3 zf>i{wLI>7D*QU@ah1v!A5p^BFYxEt6|BY)(;);rR@E@N|y2^3YijH2=g@zG!FF}+&;i&eRNJ|t%WMub&|_4%HX8CN)A4vg;8&DbbwH0iMeLI(YA>|#S@ zKTEyD#`#XXdxv_!&`$MZ9hjz_{cc)E?02-7iy{Z$Py93AC-7W*flrtl4u&117lie5 zwqwCrtiH;QBBDzA)4uFYso^o`u_D`gdI1cYJp6!8@NdI{#y8l+>RPd`8zhJB37)+V ztpB=lCKOd%ujrvT7C3=!s{w$~-q4-AmN-L6f|Td0=06}j*OG8y&(nAOYqsfK$EU)} zL%?J4Rr9|BqSO~I3IG%)bKX&3%9{JeTKcN5BLE5onRs2i$*+3iCdJ$827`pc9zm5XemN@jxpbQ zUs-pEwMJ#;TY9va58K+iM%I>yEJB_SZbFG!JPbwk5+f#QpTiDmLT*9HzZG%@T$Lx# zm$*F%S}e2iz9wp~+{fDfUi;nb-8>xPYgAC*VTZLe!2kWl6$Wq1uO>nQE0LBhHZ<5@cZ`>X|= zYa535w1{_-oNPvkBOe0WGniB~#$Tws`(-y6!o}{8!z$Z>$+T6^KkKpL0K*Q~Wn>lM ziIGsX&2%KBdVAPBA@=``5dwc#d$cxGV)yPzXeiA$*#)4q zV;9UdMOf=yfI0S=Wbo-^`7+qWMo!qgB^kfD4hzkLF@K#S0Wej)uD6~b8|3YV&c+(F z)RdznHxuRg%!9mKHE(hGlI2*rd<|AIFC3j*DO<_HBBE42+z;|%S{VsvzJvuE(rg4Z z8TC~ozjxEGjMoX4a5TAw_{lV*kU)8-T8lWHPQC8uY-7drFUN+JOW|r~fw;&}#Dr_m z-_?lW{#LX$*Hcx5!O9~9`CU7)%!iG=hK;a)8dmrxVzYM$R&QL7rIhh2Y0KAbhRI3` zEOXRhxle(bnzfMiVv%Jy7MS{D$p%M+k&%Z6`XR#CkqmG zoiMz8Q~e4Ejo>GMC%`8Yo7L96|;bu&av?>7HLonSw(oG3JgsoFEC~WLO zA^}hhf{@{AK>)G zmsEeyB1(eAj&U##%7eag6yZg^@W~)U>)L~L0qJmvE<;plKlD{2$m!gJ)V95-o_ZJ- zaV?k|P(T1oCp%1m9~q0e#U`>qR*ZEkV6uE27I{QsqplJrUd34GRfNTEIaq2JfsKxS z3Ya2;LJ$`b1FeRYM6tDCczGG-&dIzu4c$B=Q2FV4ZlwjqQ>#lg%e1Z5q2u*4w=bF32ydg)~S*@nR^`*Z>z z!H@tbgHr|obU<``x_Wnc!>Z*7@N_|IT_vSt3|22$fcQu)*=3JP_tHg6v3kW?tY%&~ zyLlj#c_5Nk0MHPBLqibCbO%fN@8*R9ySv-QJdnJReE~XuHhw`Y7eNF(W4;;80D$@^ z%Hp6vf}RcYU=5l05;Y){l^n;0(i5B4Ekjyz6voGf5D^s%Tb~HzckjY{w>X&iWZnh9 z1XxmKtX{twD|r6KH7l`v%|{I~QJvfTEyecH+m!qbwOU>kvH$db~5LR{d(${;kwxNI@_hq@PPr`(M zrhUo)_yKO;evc3*EyNwjXC6iVzDG=amnirr9{CMz=E}=h=opX14$)X>6$1C@LR9tb zf`5Dwf>X;8U(yC&eLmugTaec@gp8UVTznO_F-@4`k&i`w#aJFxip>!v zu!}0dQjb_lgZJ355X z{4`+%APoV|4?&tBXaWKeK=Wm#2o4Q~CYV4N;6<72i4e-EjJy(Tu=d1qGaoE8^g&PSHPGpY+w7{?^glJ>n9UOH$kY$+(@zsX39lg_$a}1`Ao>Rq3<6oXgQe2bWaLvAkYT={0Z2p! z%K%DBLNdJF+zEgiV7`78Ojj*t{5B%Q%K<))=CD|^NP$&Vc?Eofqp;aE6y?49vD}4B z&o+tAMdo^@W07MP7T9M{63e7?R&tTRW}#TJ-W#!rc?b;-#HO_?34qRs4Gn!Fk*>!1kCGNilcY~0&y!}{Rv>rRR9Lb#*;e^* z7x=_g%uyII!$e9$6B)_ijp;^}4{r9Bhzw?#VZ*q2?Fs~VyP~A16ycGHa14ki z0Pe+nS4w`*3@q}^#4^7$mD@PYUom< zz@p>~%a;kI5x`?Tr`i)1C?Kc^;{SpP|6Kdj0Z`@w2>_}!&gdsCg8<;)Xz%dIueiVS z^2?ZO8;zw-F_>>2h=`mPoP6w6L}b+>p`;bvQ^yqGjqE#*v4fYeW%?Lq&p(OU;UhTl zJQdt6|(y$`=2Wj9(aPrr9QzpA2Ei(&k zy(1W#If2OoH{ho)#{!EGEH)1y0J_22RfFIN9X$PlVDID!OQ!(D4>m&1-o7wrqqfG%8EafZu#y0{ z#H9cWZIiK>4a1y`8Z6ixpxCjaX8;@>9SDFfY9WJt1go8cjcOs+SD(F%%O`i@^no!v z`_M5wa$%oZ-|_Lw2XXoM6wV)>;PwGrmldQL?(D&FoY*s@R)D#Ba)(+D|K_I0-ro_hxK?FoR6($5iqteQT|9KVk32Tx;YYBx?^eHceC+`#bk9vr`P13M3$ zz{rkS%pALf;n{N-Joq?SU@PXhKt`&lF=CQ|-t5D=tAfUGLQ)?dj&VFbbiL@N6F zlNFFf_;|pVjHIij4p+{d#Q7`N@%>-_1=ZctWPt%#w%H#`H+mvDs|vXV<#6{7gr%K3 zOzpf8L1wE>F2y<WL!Q;Q4G z6~BA?cl~5KjZB&jW2Kk=Gg;|Hr;R2UB_lZ|o>JEh_EPaTtcLmOMXX3W@caMxHV#e= zV#h!mZeBQrKfV1sWEWLnqmu?D{Rc3|ncyd{AUfnx0_PD7GGSuP#>gg_4U$ZRjwdS* zr37?>E-nMwkYF{RZ2)tmrajz&tX#4Po7Qc_=8dLsqXZ5o zfJq-4TdmlS!qVgMnw8q zWswMX0-&qCyau-lJ12Va$KU)I4_!Wr;jVfd-8F%~y!{p$>sw*(9f{(ey=(yVWWWS{ zSC&I}GGLE1EcH#ss=y4a3C_gIfNU&qB|y5QW3kMIwU+s$L0D?)fmIvquzoF>HW{X; zttldX9B}@?Bz6zA;Ow3eJb(2NUVr8io*>{Ip6SP<7xyVJd*aF=Wdd;5PtOqKb}0Z9 zuoII7Q015`i2LZp{R%8)BJ~8XJ3i8jscqY^Wq2oS{8O;b&L7QNhSfx9R&!O?4Qm*R z1b!d4sEu#k5deI^02M_xu5xQw3ZI$7ocbFx>ko8=0gjz|LIL1nd&*Tx!Hnu&jO{y% zy{E5WbY>QBeDiw*zJ~~gvp9L>Ax!Q$h>6|%aq`+z7}|9P$DjBHyfOw=MKbXcncGOY z+lVFFHq0UT%^~=i$lD>lHLQSzN`lR^io_Bt4OUpVK|^L#Sz3(J;zAbuC^9>;y_D*q${?AZ5*(mGSbz^Ag^i@ev)~V6bbJC6`%WS>u>^}YYbaHGuxK3_ zpc7fGE`iK35dGIIv;uCNdvyf>@jaIk9LmKN-2bw@*-uA*ku^ z`WXSycudTAOtuwsBpVh$5Gkno0|@{EfQby3s!vn^=tuyx+em4?aRq7$Qq|nIZ9NSb zZmC35MG@MY>*1vdgM~*JN(TEe{A6mS@ufW1(`3T20x@lAn?iPk&FWWk(u;s+O{*#PzuFhnO!(m+xjD|m~ynT z9*td;g{0f@X*npUs6c6LEgIX~(Kj-TmhKL0o!&{%Xhr+ParmZo69D7YD|9klX1*+g zB~vV%GO*Ai7xUb5=+A9CwyZWun9mBgm~v~mSs*r;dScyj3#_N~j0lm!9gVQSKsCuV zJTzF11_luTLV^f>fnkUsiwL3g2@4CMObSCR*;-*~lX~N0{w6Ohwg|?;&B463KbEa` z#(E1Egc4YS$k2SrES-G95uH^HjXoPItzD5{*N$cusJfm}6gF)^Vor(b}vT#bH)k@d=AtFp$PNWXZb z#3#Vh%^jAT&0uf284hM^5gFi(imWu0XQv`BDTWeVBxf)-SvxBUT+x37i(Ik^e(8qk zOZH@db_JMYmxDRBshDFHi)A)(SZWr8B^z82!#s$I2!I`#RkWW6>hjXjBrB1S`Ie?7 zBZZBXvxN;zSFgtgg5O3mBTrW^%3rd-*hI2iS?($xaj|jClLQ55F*2VqCXs&0%$qo- zQ|3Mz@<_)#ilOPF6PYgr&zLx9WuSxkp_s7h5?~(4`hn4GVCaVV`@_}75-v8T@U&i! z>_|V1HkG2cDi=jE|4+|6rF8c6(jZiygS?grn5=e($r@jntn-7(dYa615M#PcEJHEZ zG8`tRA(&?xjCtz=V6wsm3)VVg*;*ScS+)jVF80_`lZX6-P$Y(Xs*g8GpWU(DgLwRs zd_Auh2PugUjJM;^WQVfD+dJvMMfLw3+dZHFP(V&>|F$k1nC!yTK%M&V)AUe-I(~3x zA0|gzF+NHLI5mZ~p`BRonS|vQ-e~O|yZ0*Gt=qSxlS>V9%KSh1srvu#{w9b3pa7k8 zkxGkji_%v>P)3hr9-v5IVSoaF3+-doyRfnrUVe2O+WLktyln<8T|>C~@Dn(C<`la6 zd$IS>0gP=QNB<}v;?X0hY3;<=follN>Sy86W1&>jlL=B}fu@15unvZgOE`SpLl7AngIEHfED^7kgbxp8p_l%!NHPlAQ>B440@CuTkXKp-2X|j=w6McE zOIHLZ6hadx0O*3ofiXPy`j;@i{}{&hpFmbwEg}i3zP>?lwR3@sl?^54N~~M55Nj#- zHm+I*)3qyMv1tPVXtQEIPEKx!Co4-!N=0Ty4$?Amk(`u{WHJv!g{CxSrH_r0SK1OO z^^=f9xu2SvfAn^wZzY#qETdHwY(U@g;4OgF+|Bk#RtBg_eW z>sGEI3nT+{a3x5`A}u)s=_wg%3H{`RB*YW2C7rT&q_9Q>f+CG+k%on26Jukb4G16rnyUuD%W5q`9X2WpvRwyH=7)os znPTZ~9{%u)NJIVTLBtmIz%#lE?z#%NMwP)gu^v824RF?#!!EKEcG^-{$edQcEVzdj z!8Irgj=u45@eGHHn>QOlZ!{MsAv4+!X;Hp7vwuttUL2U(g8kdO33%P=tAMjZjdf>2un+rpQP~W2 zD*$XCp21po)-6+abPa7+efa`%vLrrhypq5IfMNoS4*-zhChSjji1Lq2jFgPI^TGQB z!S~f-2yZddww`zbvLNYvvcQEl5zywgWBlk%bWEK>&&)YI^Oc`t^4LQdn7x3b4}Bi} zdoJSa(_h5s;TxDd{Wy+2`BgZ^)(~|3$u_*?kv9You476atr2D{z_+cP;?Rwo;Z(;tUP#n2f)_G8RoX0 zh)5_xKr}&Mtt%{jSQ&FWVeOj&J54%FokF2cD@I^=G;Hkb;OO88^G%!8vP$NgZD3(; z2Xix9<(iq>V(mI}xO)Y`$1fZ~p|J>wOhrIgD&=+@{DTt^5RweffJ93DRQLtT+bFT{ z3(_MXG#;;_J4kEPaHHF%VeQH%)6Q&V2cN|pg5+uOL_94nTuS8wjDUbPWxXv>$c z!-|y~uzHOtT-|)22?;|yfjuoV7fH!ENJpT*%+|q|~c!xpRk=@)Tv61<`GU_Y!+^{ez zsgLUV`d@M3pJ|^u02m@2K?vf6FjqC!bU=!!LA*!$Mmf%>2{gpHvBR zzeITHSx_r_;X$x)3eSR5ST?Kzk`a<#3&)6T_@z|BJ-!M{T;s9YE*P7w+>suy$52fU zZk#%ffh{A@XSZXSdjU*rGGVeYkroY;RT|7)VM|741HC>Jhjw*i*S21y#u)%mM*QRz zDFHhHzzAV~A@T}Tm;yxsK=mC7jXSFH6L5ho=aq}6@#OQLLrOuD0>DKZonXxhnOjnY zSh5d!#m?T&70w>P2#(H0Ty7HznkG=)vkyhByWksBK~@@|I=j;gYN4fMb9Hrrua7r8 zT-?+GpDs?UNG@LR;B_7BU9rj3N|}QbLB`UF<_sH0f0$bPVx6fgHf*Mud0^Eh4_Mj- zV57M^Hd}ho-x;Qs?#ecp5xi`@vC+&KRt}!9v}ahlP97TAx%k4?*%yu;L2z^rf}3wR ztew2E!NMLk4jyoH_J$qf;pO2AKT3Arz)jDl*Uq-Ma$(OIoaC`;aZkx99__`rj4b9M2C zBkyg=xL8=)!_mnT);3N|n;GNn1ZOudI65-VT>atZ9!PNXLqK3SynKV<=@&wm<`WDL zuRwTn-&Ye355FLIcn7kv3W7WDi|8% z(#uiOu@wmgjfl&xLu=m-q~umZms*J2nl@B+3?QYr8a2%wkav`0w87|YuEgns+ttM7 zos_)WWg5%2b^>7wrU#p_ceD$8$GWg{uo=5X+Ze9--b81a?>h2$u3=g9bchmL_M^*%qVx$5haIxf{*0MPK^cLLyt z|Mm><0~pEi{lnvTggSHk9lCFGf9tU)vDzyiYdmvQ1z6{vj765gFj?n~1(sShT}2iq zmDk2h%wx#nlGJxWR(j=PsZ*+2F=M$?JT};c!p7PY1xaz3sL#M>AG(O~ZWfyCdaQ9z z!A4g~yMhjA<0}x8T8Hq&DzdFetlI2CAhd_MwHo z>nYi+oZ;>ph1|*>4DP;yy%#@+?%g+#Q8$ITn?f*WtuHdG$KV>Chk2X4D3b%R%36c9 zb|F}19)RT*8Z0#@%-`U{xCAgS{V{ig zKjv-lg~@79n5^+8`}8tw8;#d6S?|HHZZKKlV6bI&Fj;O3lcko1{pHT|bA-tP3!dY` z>$oz!JLd4bIU76;uBi{^GJbQ`y7PX#F5UU&!6+X*gXJFil)b5HkqZ<147xHHl0`Y3 zig~ulYFVshc6z2;gVgc?IA{_vceN9i@tODmHePpwE19+v7H@RM z5;E?2OBt^P8!>mW8Rjpu;=VN&uXe`#RZf^kTR_G=XN42yETgSs!#@lG|qVx5GR+zJk|T#r$98%J_I- zIUAi78(grKjA;o0eYJG}wjaKU@{TE_Rdl1ErW<3^`w>G{>EZ5;z@SjnH8dkHzYqa_ z8bl|gB8rT)xSCMdhMFO|{iWSnNAMmd< z0l?uyk72%js$u}LipmmOO1~h=f}#O9N7uk9sv6F^8u%o4!6~+#3@(cDiA>H)UY&|1 zI7ZUKu!Mzn(*|4U1H3R?8jXpja&%YLA~vBIOC4h27G8jpmtREx_;CzxKZAkk^RV$Y>(*K5Gpb?Zm(12b12!Rf zWVSh2Y#D`l8v~(9s6|X(ms(*aBC`>?>?TBIi8UiUtpVEfCIlzdk~NmWUtbAtT`9by zOW_kkizh3NE{9u0F`R;P;1HAx$IxPUM3uuMvIOoCB@9_5^d^KbTwqEaq6>RbJ$eDINn6x4s2q4u-n;ngVd20$C*W+h_Qz&hHaM34 zSZfggGv_GS`zFCPC=>1>IdEfsI|XLLJ}?6g0hw?P%z-QO%EmhZn_P4-_l#2uS=jrg z!O1rr4&JG-r~I>biziEtpwb9nnF+)Og4#yw5Lmm!F-$r%G1c(b@tMRF!9Ow&n#gRp z1t!75BND-hW$4{;7WSGXSoy@jPn&{vDimM!uDJ#^)qLi$aqyOvxM^wG`G`r&MRH+1 zH2OlUcMQf7OHVA@WCx$1aI#-3=)*j5=D>EtTOee524-ilodmj>;SNj*2oenCec9QxueEHQOL z*YMcA<*@E>Lw({@jFnp?@JDyvqbpP3{#RW1XWFL1AEEU&EhZWpj zVHJgymJyh@#+U5I538)gdEaodzfdfuEin(}b_gvDi_NsO2yRD^J@PzWce#u-uJIx3 z@h5W)CGeIIaPnDsv(Pp?gX+#9^laOU^438VHw`1Bsu!->Y~;6W$7+K81`h&4KoVjp z+rqLM;mLGw^3TBr-+XM6FYEbcVlzQxBLQWZ9UHEVWcC|qreyUS!wGl^Y{b}rSwt`& z!pRo>=&w=kO6Pbs427@_DuRus5LR?8f(u|CmP-$< zvf2X6*IHsNx7Vzww!7d7_^zk8*e$kITM%C2pd>8Ixpx+h~&`^rOkVzwI*hh4OiNyaU_E+A%!X ziK(ecY$E{5GhS}#hApELcu&oDA)ygT#~-V?GDBw|H6EGZC*i_B)BYs@(6Abej26i} zq4)0r;JeH#`6}GNzK1c#A`Z(P6IjW$*yI$5lNYX{nC#8f!wW8+!8my0VRUXijurN? z$m=`+o2Uv{hZn()EGICFE!x?au;(~*F(IgrxC9_>Bj z=p5LF%#tc>o!Wtl>T;x~=y2`KZd^Hi1PPI{h(IWULf9(%`XMqf7~%dJgv%Gyf&=OL zsSk*UX#CapV$Hov!-#{!Ua0Kh?$!_v_uK>(n&-AaM>|I4Eyw;ymm7v1?IqQQdgUL?U1QB3( z?rIHXnyi7CgSEDil#`x_$f!X=ej|LfX&Byl1a;jb=p_L5OzcBd=Qc9JIux}{qOxxv zr7tD(Mn5bv_rv7TYxLU#U2(s<-(ve@EV5@h>|}+PFhu3GBeP)&Sq-}oU$G6|N$rR& z-;PBN$q30Gf?q}#yy6=WS3HFHvJu44T_S^G*0NHzo}jPCe1g6#mNCzoaiuMynaDH| zk>&GEVPdidbCztNreTrvZ#tx?GQ7r~plj=k+^l?fdw9a$ z)*4>!o(KsrOtyEhwt=m^BkWu~kXhD(teRmyS5Hc5A1qyGi-6!T_<6Y^CfEb#56@ut z)*j4`c4J1Cucx%#I?#lzeT|CoO_AMgA8e<8D@L|7kli&>=5{Cm9P4Ys7=cn&d=?ug z0B#crJkW@3BP|#kYEo+f&dlt#Girj8h#oK}M%0)V1;Wj>%7tG!wk`or6| z2!yi#$=LAEvQHHNrNd7xn0SY+!TXfK%oG^}5m1!rG3vX(Y%GQjJc@ZXNmyjZ0>T2c z-YF7Ww(dhtWe04$w3H}u7}$Ldy4+T^!g6KrEYhlb5MM%xmQ%;pu@3e9GZ@`>5xdVm ziIl2-M3;0!Urq*@CCg4VBQdWLfiYR=pWKUGM=zqeZ#%XhI16o39wOqhP+Zo8tb$6! zrRG2vmjqpm9$HyZB}$LTShB&mMEWHlR-XiYTnds>vJj+=RSTlVWtH;&lSr-VMq+h8 ztTk!a5|6ElZ0hXDOf0*s&89ntZJA$ip(1EXDBV zm<6eKyZ2vyme1#5^zS~6`k_4-*mD8PC?QKbCJz#y!mP~VCha~zS@(_%Nujn zc*10*Gv=(Y$Go*pe72$3NCvsiF#?X1)AH58Ib_-ckHx4ooS=HrCsqnBB;hIt=&LVvHa*NkCIe+V_ipGy2=>(c4mm zzLrY#G?&t^7UKj<1%9+KGRM*0MxN7(p`JPnQVRF>k`?Zp!WbE#CZ!fj&D=3CF{2hl zRcufG%izZcQtu4_DD_>W@F(HIKhr*S0F)NONQqV7z(+D5Vt5-wB=B1dHb?-JQNRV1 zd@IP<);dzIdh4J~E=G_(7Xf;&M>r5GF8?HW5)IEI+bpyN9`@xl6+t4|_A49uN zsZUmp9l4H^&wLS0+m68{vH<#mR_q~z+;j3FB_~pg8j+OWfYg#!gr}AwBsLH3z689u z9K@#Oqo|?|`Gv*E%q>7>eklqoY7oi-CvS5^(z0@jQQz1BkAQHv21LOlT>A0iFvr}7 z>5xhgfO(q&v4o63r09HMDJ$J6HQfy0w1SLfr6(C3E6O?<+@Ty4X=)dT)W$tn>y^#z zMEVirEMo|EWQx|5!gdK*N&sBqkf=alu4xFCScGD^nFgC3Lf{*k4h_M`pRP}E3j9Jd z;NhPHSD$!zXp-O=lmd^SWH|Xy0=k65!6OQ`uHlGIsepw`6dAH3B9h7xm)WTLyXG$5 zh;Usr3d_q-SyxMDG=`4pBV=f8@Fq~E*A8Is;~jD4UEt#820wp47}oyN z!dJdk91?-7{0f447B*VDqpr0JwJl_wsi`QhYeZE`4mly&b!Uek8O77dVz22$FSS(BB^fZbxUzm=}3WWk9l4;I=> z|7H^1L@afPW`2btDX$(KWY|IBF|cxQhJ~#YJbi*FeZ!!Q)FUA+2f5`nXzHIpNyiAP zw`|8I$51j-D>Xn8LPZiC9)Lr;$I#bShM~@C4763Fr=<-2-Bkt<>~B!4Z(^_meeHGV zX{|+HYmFfs0kF4~AV{Da6QCpj_H|aFx4jBmn#xPd`!Y7&GUeMOE)^Y;X)ms6HD5qua3e;C}4dGmW9GLntgQMq5WahKGl7 z;J`r~*nfcgo#@=shm5RT#E|vL8vwEKdc?-*5gHZ>FZpDoEUOfgio%*+thWikGE=tJ z+FW#x944qXA|kB>`88cIa|*!9jn-JRZWCNw+|?vnCnrZFB@&F>+-aV0bM=HiHVNSo zF|c>>glC`*1@-+{MTsnL#n=Spz&0cwW&yca;gX_&aK1HJvQ#4bc(NxgR#*gJojF;- z^7Tl|$VWNBy0om4R)NZjaunreBPSyr`8heXTx4ftAtfmZX(`D_N=`*wQaVyH3Sj5t zi**|x7=&n+Qa z@<(9(FQ$(U=KtVW0DT9G|j#jEtslNF@Z8j4|LVo`7lh(-Uv zB>H=Y(b~`icNb>@o;$*VHAslnAtKzcx=VRw9de2)kda>oJ2yY%6qh14S&u+%h?+N; zQ&P#sFbyS*eaNrtgJS@JcZDUYTDQW^opO8rIxJbS8E)ReNK7Nx#;3E<%wS`qC!l&_ zlbs({S$bikQ?QyWT--5(70zs|%-G1S^(8?1W1&?z=E^(bHX7tsccQAHO(_f0&E}Z5 za4B3o{Sg$ZBUncwEvu06%S5<74XFh+=pLQLS_^N?UtvntnnxuPj}VP7jvkoBSKoXY z&p&YkJH`hvyL}kDw+&$D_!i8JcM<$rv3F_&d+5JwVgRqc@Cd&4`m?xxZa-ymz3TIu z6sbJgg~^d_N?bdq>)a9)6CK(JIp6$&PVUFJ#mfMA*sBHwLty@si-jB&+7tk;~gH|%Y{@K&;ODsfD z$94ke3AHlwoHfpH@ry)fPakIY&fw9MY$-+&!Jm@!kjD=D{$!igupN%>BRPj=`WqQ_&;y?|F7P~6hT7&X1O`XIfeg^f#tGpu zh6(0&j_zcHt}32!=>e zssi*hm7}3F9d*SlyA_#euFOM6U9qzMwo1z7da^u{fSPPF$4U%#RHCz?m~5~K<06;4 zo6t~Ig8n{&;q(k9cOOLnRoD_Xx@&CwFg&$O^#OiJu>0UP<*ooB)t!K#lEm^Ju#&`| zu6?QiC{thVd_)tMvRBRjBPhx=7;YLCMBw(|o-sCMWy^(=BOtCMxbV3A9fsn7&W~!sO*_WdG{ox?@3Ibx{1ayO0W|T;rdJ8KymX3 z%pC(Mb%sz`(}t#&KJ<{Gw6yjkDZLQ6tPFMaO{lJ{K}|(9l9SUZ^%`0E8`W~`>A8g{ zt*(PUIfE6Y6G=Ix=pNsV-KTD#bK47pVLt<$o?%TiF`kTvmQ zB6Nremyv8Ow80^2lDAIFV_NyjSs0>pI>g56;p62CbJL9o)A(Rwe2fi54H_F8k)4@> z{CrmCx&{o4?LtgeJ#1V9P)eZPzi$TDE*!zrk6xyG5;t#L#r2zyVCSKWc=Yo>!|ate zvB-%s*iMfX?#YNLA4W`BKYWrK5tO|Jv1Oys=5A5nPTuS#Bfj|v$m+$0z*3mlrWn5Y zVl8isr1BaWSnQO=1~N%~HbIuqUu>&W-(7L>)1$p(7=vs;+FM%5{=A@%j)pcO9AOb6 zCnFH9jX+^pH8RL@C^fUCi=@02jzRIrCX+93A4X(C z1`?9eaQNUsHXa#>4hw?K#RdQ0(5b2WKCC5iunL z2+3$*89zrwGDGz;j>e&Vn7hsquKr*|2JD?!!E8C9i)h>M9vkdGJqoE(s(*CR1G z4P~{>$ggNZR(TUj+6J+BlMN!0GLc(WhhS|y99;e2<`ax0GRBbDWY~HHz%xV#_aL!o z_^|PD_tU~VfMrA8fsTno7~>eDk48AlNg{z%8p2oty7X%YN5~sQI)XkKram8uMP2Ys zsKW}XuqDo^SZe9d#)AOJN_^`UHJwy!)@uPjRqtislk`yL2YwtA{@L~~1Aqd0DxU~? z(lsbU=6J(-Z%1LrD9XCW(Y$pJ3JIc7Nrl*R=mNTX$8q%7Rm4W; z;sk**EGiub4xd40P9b`?464;SDkzaM@`@0jo`urd288JJXzb{Lhkq#g#%G{S%E7>n zBWN9&MV74E!q(m^CI{|h3Z0Xb&|`bC{qR+^Z{3TPR-Py>E5b`pp26rAURNIhcUF>w z*l0M~TEfSZ%+%Hlu^~PP4{&2k?uV@tBRF{aEGj#DS>UoTxc@9Bj$cDUWgn`yo+O)M z<+q5%BFey}WXh}97_7D8`7tSoW`z%y*YiR&(1r%7d5W?mR9KJ}LB2tV2qqY)<-9Zq z50;gX0}!myKtB58E2~}eSbTIOs*1Al(hJXG-~K~vEIQHC(TF;-;3Bf$p26)%%xlJ~ zjW#GMDaPd1ejM64NVZXizP38FHPx}=&tm(YQ%El9hpBH4Of1OgZ4zj4m_s>iVxh%C z*L2Kt%)oN50xWaO#eC`Sw1}eIO<=z1O)m`rFf0`z@ukog_F$7wCL7>5EOE`i3Y%aBfYJwe`?dg| zXkqF0GxYIuQvsj=;V0q3Khr*S2`s<&g$^^5B%{QnkCa}JwW5UqzWSY?qHotxY}#2}T0t zMN}>eI4j8}w*+i*3RB}tB;~(WExv`9zt>35G#5kGALzAn+MT4Fiin5fB`NV5U_Q8qQWfn)#lG%ElJ#KXDE_ z4xUC)O$*{P^3m2mj*g-2XzJeqhrkppTW^cp!eR`t!cK1OMoCT*nQkFUD6{(phcLwk z$6a5JH7;8C#pI&AbpTD>Lx@hvMrvLuTDA-zHM;<{4Gm~-ZNl(CFGgtHJp*WHA4J{Y zK7|ti@h`7`&_^{lj=H;VncnCQq4{UUcz;dT>%wt|JaEQYSTMfo{?7=NE8RKfu3iU+R(NrD(fXtBg$++;(vrioW z<=sH}aaRU~)ZmZ+ps+y!Kw*GSy!vHi*L9-2xtkRuAFf`0$RPmQx&**CG!>}@E$TJ1 z$=PElrxZ&_N@Zbhr0jDj!SlG@UJEFeUbzo+P`pjc@TPq53vXPsahU)SXBeN*<4(~vILpS!HdjwT&qm)+F=pUcO&8J==proR?p&6Hs@55Lp zrDSv{nSur4bs=OBwg~q1V8yXUS|lY?0KwAN5?$Sm7@wL(TxJp6v}qXHEB%{f4E5Wf zD;gpI68H!P3ke4EOtqN5))$M`I8oxIAW=`26Hd^J(IGxAhO$;xE@6vL85k2DjO55r zBJS{MM`%nE3Tm2AT;G9%=O0FW_b6H^3wIs8fHOCr zMbiK!T;mv-K>}(Cl(W00@tJ3C;4@EM#}n61#w|m7hif6hc7=1UBxIC z*z2*>F%^r*3}sqSV0sS%0E<9$ztegUK$Fp6`SAR5R&qyg9S)MsU%qq$TZgt%-bWxK zIgyQ6JYw~+YOo+REdw)q_T%u$vlyP3hMfx;*Tha_=j6l7M}tC2{_XpYAibg&w8huz7@$-4pDh^$gSO?05B;n9X9rMG#fZLJF)D0!NJ}EHfH8n zzupvq;W0?dD@JKeomvjAdw2j-yZ5rO7)1f&oS2=9*pw`?w^HO)wjw^a4uLU+2#6|z z$wEh%Eb~$`4onu=!DQ|x`1;3^4JRWYC`5gy#6K_;(TN!dib}<5Gk5q#WWzl)1$th` z%1ejjVm9ub+tI%BG}4-Z%FD5JdJh?35u8GjP}FLe`cToc11WXGSYRDQ5DY_n z*#OGBX0dhuHJH0;;jM{;EC8Air$=gXJi#y;2{91_bsf^;*t#btASHpo7!`^%eH0R+ zqYy6Z8Uuev*vwBpN%qaq!edJo?<{v4gVRHY5dR-eG7Q7{$qJ*KzLpRWx^XOoZzgk3u(@$^e?K%d`+=$r;M zJ*&8V47p8%ylyw@dZ!Vl&qPE_GQ9nQVdvlqTYDEcyZOM(!WNq?tYK~A2oE=JxV!rx zTAxHV8_ovb53Q|@sI99+1IuqtK`xqGTQI$22OfX?VU(5TptY+Tg>@a!Wfa0SG=_3J z0G{FTh|s4ZCMHpR-^SD31zx`1WWMfdd41o|IIP}aN-`0P*0yF04)mk6q6$aOp2wE) z8Jv3Lv*_7%9!nf#?qdKZ_w2)M%D4}1y^jxX-=U3$m(K&#~ zP%RuRt>Ee4054~I1o_I85=YoO+EG4u!#7Z`=CUof4rMD=kL-#TR5!Mg`RK`pWNE7q z#1IH{+CW5dTYdi`M3%mahE}6Rgnuw12#WH?hc+mHtvRI>fzV&0K}CH7TKWcY{PGRT z@d#``a0W*%KZE}1!|0yehk}Maw)A}{qMK3FfC>VdtdQK(T!AD4ptrLnQsctm<7!0) z=*TpfA~z`#x?peayQ8tG8N*Y15D=XX_lR`#?L3aIiGySg<7nG)5=$LIVPfu�pBq zp~Gk%IS5P7Ncb}D^39HTeTs)*LU=+dw23Jw zs;@)O_#}GAr%~C`OIA~exWWdc)ej)1pa!)){n&fz6sGp=q5RCi#LPCFAZS)q)uO4U zRIOTk?(lYO?W)Dh(u-!7IcFamz5O^7NPfMswoOg6~G zXv$)FTgF~qAB@5R^C-HMe72z|XdXiI)_rIlKZ4C(DOhYBkGZCim@gygn*w3&&xWCH z0Es271gS=r7k_Bti;+g~%d8zjY+)y2@|uxT(+e%jUi*4;=U z+Yi&SF((Mh>N6WRQ~p{zz|P4Po6W4?@9mE`eKK?eE<1aBn3}Fr%eTeowa6tS)$!Rj zG&UeBD+^f}iO9{0MO9rjVlpU~$#gR+>kyofhNPk@#Te7mvf<(G4omY**lcNrjg;T( zE$zwv)39d!1~}PoMpHv2>MF|+5E#Hls}t4jeW>i5AQPOT6pqAN2Qt9jWPq&0ACb%$ zUv$7nbP0SPzE1%B@HW-n?T_KXKi@u8095mU)NILr0HFMCG3Vanwk(Dq0N6S-iNw4r z^o>lYrGwHE;;??%64=q+gfKGBz@RV|LRsV> z91*exV7L}xp`nPNE35hX`}(lObV6HuD|YYShliec7KN2fIC=F+>^}Jrl1f_O9i4^5 zqIR~rluqf@NX@B6GXeAX%m|uFGm#q20&cq=!QOUc4mJc?7iiqA5aMC07(|$#7us6e zFnj1ELgO>wM9^;>+KJqTeoFc}Or3t7l23>EmeJVYkq!&53~X|y9A57ZjW&rgI2H*B zNd)=?BqhWmB{3Fx*=fpT;3XkC8l|~;s3<5zECDbrH3=m}g{&~yNKQ>hXjC-9bkRs< zMY{6n3zV)?2v4m-a8e~Q$%OLBTym@0P}{l%vxiUO$cgi~`Pj3#{_qpHa{VSwojr$r z2an?9naenL^)Xz1;w2oq@F-GBno-j|jFzEM>^^#&4DcLIpFfKoJEw5u;4EgRM{#8T zPVAqZ!ccz~whj+sYIYx{4xdI+c^3jw8sVichcj7yPm<`RIy?anzUW7?Xi)f0;T(fCwmz7goyGef zeW>2fAa&h)zYvzabo2;;4 z)jBL%y9t&qUa0Bl!SO3M&^JDY^12EXmllu}$u}KjYKXk+YgpP`Bt@_`f*?p47#X9! z0(S3{ij;-21bUc^o{|Ly`g@?GqZK=L&EVXXhfrA2jOl}CvFqdwRCH~_;Otp+Zaa?p z-u);bU~DjRRjVeCv{fqEq-SLbA@~)fN5RM06p?|>l)#&j6CaMq08eQBy%hisj7=dp zmW5rHiq@^Os2kWx3A_uvvkzg7YZB#Nq8bEQxG4+^HwIw-T36^23y_#ZImL8HA7ET; z6xnSM8DS)n6Jrn~j4v_@IVow#OiV^(SQw>F9CCBA6aeZelOxEwiz_PC;t=2c+3(0| zPh*L>A6D6gp?}u}w2U1oeWb)2d ztN08ZkPzujR_Ke?Mk<=A-3X2^Ku7``o~|JjHuotoDr_8p$ubMH_Dvxk$_dkDQELRF>7?{OOB0bMia}21juD@->W% zj^l~PAH&e#7CiU4&!Kr}8yl}Y1W@8@Gb<2~Pyh|Don4rZ;o%{S65zItjiIZ13yzFg-(CfPAHIK! zlJ_nM(&XD9#t)&%0LjNO;h$}vvII6PfJ**%FJr`RlP>?AW}FAuvu!v0B9oDtU5voM z5cLtFg6w>_xCX-2mjxoG082J|Vaa+*16O~z`$WLeH3Z&%1Vjx1VWkZ#fjQ=_vcb}g z4oEMm#rE057#`n-p584e$jc=IBEXT|MG*v}2z~+rT3PciEL1IiARqnK1_x30YAAaH z88(pNcswLn%^}l}3AXnPvgO;4$DVtctSbg5EMto+;HozjUp zW&v1b?~fhFFW~>j-d{#pmSyMJXfiWK1~W7B2|RIvnVFfHnK>geG9x3IsTjMfxmpcs zvDCIq^0j?skY!nx)Kt~o&z);Wm8{S1VgLDVmB)~)$Lf73BjW76*R$Stt-0o$S>K|j zy`Njp-lcbPgD|m+Q3Br1o>5-C`!%jVeo0UtK)7W-M*yF&fMHr@%*J(QD-DBE`9M&2Eua-APt$H))ma#ETMdU$~E5L?K6QW4PcD z$n5$iKl`OhfhD5mS89LPFZtwGpNK6M>nr_!civweRp0-Aw%^2w|9`bF9e`?UjFQ5; z1(bJ326e)ICID1(fT}J?*W@B+&7HAw^u*cOU8`7Dm|KLmPo%b=)jc?!!;jJ--lw5fM$ZVb!2SV5 zimHnW3)8YX>jZ?V=#i@L5EmV*Rr*iT$B>bfK)fi%sIU-p!9fHGG<||})V6dny}H5H z?FY2?4zcs(bq3}($*=2_o9Y(R8;|H1+oqsqh?AF{Nr+3Nvr0zq++-sB+zIt^q9`*S zcRN#ope5c8<`k#JiUM>c#LJDU$|^dOZ8vAh0%mrgh8@jr?7#r?obhwX+v0*v(Gc!5Dl(eytL3wS2@sVN1$A%c6 z7-DEd+UOV)OV9x_X**td9;iyuzL4R?!5jnJ#)7?W#dnI_ZW+J?y>#aJ3RU7Z&5Qe zLt)1diRJC2RQ8C?AEB^mioAwN+;oMwMwgP^u}o%*D5&%f>44)@_V0-GEyqUQQ<=i; z{Pb+zd%=g_`5rf)y~#BJ^NVl)3nGiAwVE$`OvDafQi0=%q7GG@VG8@KRV-nuv=sKM zKx=cc%cgn`SVVHrLI%{>d@^gg1kR%*7BmXDL;+TI;U6RlS`=VUQz^wM;t1T#uroS> z&fAtyX&yELK=ZTsJDCtI%04EoPEpgirq1`M zWVcrWq^ZJ6L0YCDZMTeBg0_oB#ax~gHGIa=z;UZ!xkeSlRp`p;GZ#5^>Jmmq);QREVrJ8GZd{*Q0gVZh8^K>jU4L&>!R?$B164)Yq!}V8 z$TU!0l1+s?kB^NYI#Q?Yl!y@f;o%=HaO+_C<}>-5S6RCC2E!{)NE5|ZKfFePbmI2O zJED+oa`=QLL%n@`@azUH<=G@h1>s_K881h3vA|~dyIJ97Z;Y>lG0qkjv`#ZBaC-Un zholzP;1iw2#MOtC%T1V6(nfXfl9qirGOr7L$r#5}@=%iq4#~}b?6NCoE?YA?InTo4 zBFkb==9U&&T$p2HWs!~bRn|7vzg%xOV?78itkxGJix~(=bkf3DkBBGc-9zR#BxWr5=)U@+hjV zqPnx6p7|RTwT@uq6fE!cv2*_pHy=D|_sL@hpe_L8BADQ1_KnOIzBX6+Vt-}okJ zH3K+=rm`sKwxVl}(9~)CV^l&&6TC3B_-qQABKxxES}K?a{Yq^?%@LZPyuDel9)x=bx&ScdBnIcefk+r_$gl2LA5? zp}z<<_@x8zQcht(gl360;J%SI%4u#2u!RN8>s@BtGQz4MUo+&+Wa{3lEMk| zaVAh~Z$Wz8XBOB-3!W{@)D!9NEFH;(`nnq0dWQwxX#~XO(LKFI^Uw+{qw5ST-NQG& zjN+~p8YUib#6pz~h~l_;7^jRqIegNH(uz9z#8M3o570N*D{8Qx*-=q}qV@)ddKnRA zI5|GRKySOeHpsjHWMpiCu90=jJX6Hl#85wUorcl7oOeoL??q2ya%&hAm^Jp!QQkF0 z=i+Tq4Fv=x6wo?2MgQm|Ej@#b&M(XL5lcMS!Mzwqr08@)((cImRZ_)L4>H2xWXpxzx5p&hgJpt9Tc@ph&mJ{yYm)< zH{Qn7HwJsLkc~Zk~$tw(mVdms(47W-W&NI^qlKXdYXlb!49G z(mJl+x<_F_9?p*P^Tgu1I@)4-`4W~U#zctoFhqru7_C|uu|a-BgoJ5xy@rem{0wDU z@?aGhzvoJXC_YiU=FwW{&_TNdPKd?dXPe9(6)NPM${tmV*hgE&4nhj-%RB! zjK(G;Ps;*+-ot=(WIkbqeV7Io;2c|tbyzN5sZGSyPjk^fo8vA?oO1|fZsUfQ(oVXs z^k;$KFI4?+73J|MKUY=J)$9M*0jMILKmD1E6EYg8P1EYN&%E6Z8%aQzI5QI!Z@)h#zT*kz^+6Da*^DAR~<|vAa1bNn|9% zQIeNINns|r*~yfM0*s9eB_lCWZvF&<{k^p037ws-)Hc-%T^E#R!L#WA`XYkA)-rV^j{YJ3tZDDJ&VLd}d=Y=fw; zGHe3#*n7#FfCSZPhq&UD$Qkn}F52liWf{)F%N}Ic^s{#VJ&Ic=*?9bc0Qwd_QR!m! z9`f|PAF}=YJG72(Yo9gb)$;I-52WLZrA;hl?#4@QJpF)v0qdwJzwwO+Om02n)|=m= zw0n}Oo=IMP<$K(C@(wM-3-YsfXdb`H{N4B2dFKzX3rxm2D4M0s>%4gNnB~Fl#f)6()Ev`Z63n8abLSb?U$ z3}n^J-+GPNn{SX+J4(~w4NjYeVr=e4MoJ=+{p~cDq!JV0f~8V`2@%AG`ru-D8QUvo z2=%n3I4xS-g&W-+O`=S<(WO@qn^VQOe9!4?55zItp+@czgIv?~yDv!2EyOz@L`(eZ z;^Bk2jU!eLuDJLH;-eNrbmCkRQYoyeqoAsh&e3^hww{ySFwOoep`vyLd`6=F%;LoI z8aU>p@=6*wX&r=LT&@f%k9hvk$K00lpVd4n-#LmS&IS%jJK-3`A!9d8Tmof~O2#En zM_^1Mx`Z6U47o(6mEbKF-Y32ooA6vtIqSLPlfhY0fXV`EWieIzsW(V~7YB(8ZCRA;3!)C}t%Q85&4> zd^{z&8Df_`818S=Dr7aa)KFem!Pc!?yz%abqFz?WEN-T*dy0m>S<>=qNKPvzOJLoQ zpGZMsIN@IQ(n0Jf5(VKSR>{-e2rt{qWX1%@>-L0rJ8NMnjU9b>hsEI-5KB&N7b)dU zB$v0-IeUx9tQK+`W+?65V!x$~_7(yo>u?U42a{ek%E0PtoO6tq&K$u3GqHEl4vO7V z$!1jofqhEt*oyrzjp2ZnQ%|hZ1$QdP?l5%oYrFPIWs5%Rg>PaFIgLvgiY7THYT>N> zjI*L3TtbRO{Z)}&)kjtL0-3c#v`lQ0-#A2UW+hF1GxSVer=o2^o7eM;D-mV3%GQGy ztlxV>gUg_(*&_LTVe=3rZNrqydCO}WrF(IQm*4$EBC{(fYZ+ofps{-UDXnA6v`=57 ztY?{`&UMVa3(CJ_AZ06c7$s^wwaZybPMLb<5iXo!c*m*>ltV6`eP>L z?`auZ<5u07g>diaceDs{jm8;x-@&;2&+uV8iAyb==7`yh2zN;@d z>lV)mCxZacpM}jET5a!7KKV62|LG@u@-ulR0MxR;s1B~Z_rIP4{6_#lp`IEQed5#h9+5B+n}+jS)0qt6wsCC z=aQ3_N|Ii$h1^7j1`!(}H%v&VJl<{5;W}a>qKFC!qA)#~iqaxNbvkOBTUguP;rji@ z49|Ttk(-}Kf+3FX_7=I;0}QP^!ZIM0i*BM=q+=g84d#fE3;w!zo(KT% z-rlCGyN9{Ob)J9teWHuIIc)BYE~iGm(<<4mvjV?u`Tc`p|FWgy7m6KJmFO}Bfb!ff zOUpE*s@A1e^|NsM730^QkXb)OPTd&Cjs3K#n0S38?e%5UmudxWt;fPBLXPslYATY})s9<_(lH0d- zv>hP#A3vm9#bd6nGPb-d*I=8qCm&%RAm_|Fnp4((EL^+EFXV?R0DdY>sXpcI)PJ8S zDth;CGR&=Nk>KHDWzwuN2_-%z}sgf@Dl*4LhyTS<*}8@ zs3M)-Duw+5$OG1~qV@vNWjFKk8-KvS$^#19=cpUHA$Id60s0DRIu|&5&X^3fNR((0 ziylT^aXtFH4$eBpXsdz8?BYZbByrR}j#DmTlRX6}ju{+x&E$le9G%leWe8v#R2fV? zM_p4m<((-OEKNQmpLNI(2xV|ml*=Vi7MCqO@%Qy6PE>iUE`-SVOp;3b@k^@3E3saH zor{;gn!vaMxd#lqeB*7NJiJR~Wfe1XD?EAkV*)c82+OW#YUic2w`rWdOLD_9`>oYH znEWoE3J$vn1g$gVe25AZ7#_7t)Bu=V(MwhDG;_CJ(Kx;#YH*Pwm%Xub@u#+`gw@#* z>Wjnz2fAsN*WcZSKvDLtqU7yNPvK;7M%29#`Uqd<=f-&OTuw?ME=RPYj4#iAEB zjuVzx$(|$DoW9~pO=AxZ&H_U#M~qCYv9NaKikU5!%&a+b)(D@71WFs)sPF8hxUN<1 zz1JAqe2#B&GY4c4RP&m9EaTZLD*d=~5~m$w2@>o3SO4{IKQmooPd^J$Q8jq}gS?p0 zGRGmOWX`$7aoHh=^t>{f8tRyzou*h^$nx4UH7)hD5A@MGI6!6B2z@Iu01E(**r{X) zz8V1kPKiG0zrT<^uGIsUey;8QlBT-+FGTG8CN6xwSn`|R`+vKAsQ^^@!BnzDHU8`d zN~%y8X>xjg{>x9bogm5r*Y(e^|DqFzF4}SOk}b9#;n;abV(u!(fJF9PbYY*72gfYD zs2!N2ymNx+jB4yv?FL;M7472`2=oeD#^{;7L%nq5i;f9+hUXKNSVE*eoydq7RI&5; z*j*6DiXx1S3MVEil-OvUwtqH3I$mmQj2z{8jE)4c%?UB`dVB)GVbRox0&E}XrM17G zGEtS|0@%*Ut5l1HTe$h05wQ((8}}%zZ0FcXQ$}SpRja_0J@q8${PA)yCo0GbH(O%@ zJ?z9fT_GjX7dPw6q9ptokQ?sa)7Qu@Zx+>1%H-7tbd0ZR`;9Y2sa_e-UAss>$R1yFlRB5CHfO{;}M7Rn85%8(>@&doZHc?uKj})79=Z&vX z)i+N@!w5xP%artNXlc(2nkP7W$&{SrC^}nev9dH1AmyOX?cU99e8G>?&MDH;q|+s0 z;h)PTk93Zxx-NF{92YRE^!;kJTK#={Rd#3VB#tLc=@{6%zIQdw=uhZgO^|X zZ6flUF%-A3aOV|c*I&@N`i$hJWe(V5mnLF*x_4JR;;jb?sD!qb%*-dRfb$)dpxdO#78PucV(`jkzAV_8AaTk>t9Zj%U zVIL0<%*~AP2?!uKDwdM!Iywi2MX8n3HZVg)_X?RU8=R2AM%(!!*L0w?mu`) z|6o7QUwcVQcRL%mZ?P$_&E9w@s`v%xodtfo{0Ms(Ysv={VP;Hz`vBY)nvbwj{!@8o_kOnVTOFN z%DV_lDkG_+8<&V2_FeJhxRnpBlj{tw+>w!VRDkKo!3*{@4J}jIGeu?ZJVj!8>V|gM zZxqh4D}kcKJUDM;hfWvG*zg$M?j9`8&EVtd%J|p-;c{cEthXr%akMwoP*sqp&G~gU z*N_|+&BV|k0seu^Ev%7USV&`M3sWnLGBWlvcWsBB=?(If0+dc#**?PH^csfbLe8F7 zD~HK+)nrqd6HlbS8$OO!qNMyq0ooGespgKZU z0Z?AE6)S8R#SvTi>=i!&U>$FK^GCEytZM*lo4Zd|^CAaL{m5$?*Y;vp=Ec+ASWa(u zE15-goU@50B%?ztZ=0ydaIN6aUgK~si269L^8Lwc`^}>TF7kJn$L(hNR!w!(E22`B zQdQ5DbyH12`nbxX82AfK?tkz*Ec_f#&P}ng}ZqqPnRo&XYag|Bs z;cIX5;Kega>zf#!TjR-BzE41EC2>W~tUh>yl_ww4GJl`6)-?_aaF4qeaL_4FV3^H0 zuQE}tSsb(wjTVID$e?Eo!fOSDaHiV}WIRnMvhz>^ovXqQ3Y(XFerRpw#{^}+I@ zC_q;Sd|c%^+MDBGdLAe9i+IW7gy=ACY^?L)H@{CpK?`v?bs7NI#9nXQeT(V!2NcQu zqNZ~Si;Co4bR#0jmz9}mVnV}lcXHHf{`QIbO3N*j`>vFhu3iFku_R=bQQEOcSne=~ zv~mHWuC0;;>;iI8*k_!hwL)Tl{7?Q=v!uWL`7im!Pe0-30>r=hDITIzX0Jyld z!%xM*sl|_9E9)zc?vr2qLVoA2>Qn!HQ7Z3$)xKN{{41fGoDj81`q#hw`DXz9l%Id{ z3x1)3p#^}dFw&hD?~q;AN=a1da4K4(HC|Q zk=cwszm2S#A@oJ^Tpq`i^b?jRHfG|XfFP26rXd_M^5y6SJKVhjxPA8tZmxc8U%!Kg ztB=@}CF0@?jE_%}msdb%TQ@DWEtC|NGd?j(a#9A@H*ew}9L4juzmA_So~3Jd>77`l zdt!mjNAF@NXcvnxPw&i4T1VFDn%ttUeS+hsOz3NG<;Bf;x~g-D@^i*VEN_Ir3$9j| zL@n6h>u5?!gb!YJ#-!>)85DJS(=^7OiFn1=VCG@qicO#>m|jvuWf|EA zYKc9~Ty@xZ#$e_ghK*MgrmkU_dq-lXRJ=#DRuo*--8FNGz(kt4yL`q?-ggPb)WMI0 z>DA26Z=1oVpUZJlZ!8WFz{Q|vXF2$VmsN{re3CEoBr8BGfzf_J1 z0FRmn5t-9KS=Ttl9aHoQ0MjZ*WRUgd%w;R0BZ8KbZwQdG9=RQA~k z0Nu0XyCup%6i$XH&42zMf1)ims5O<+W#+(4NG#8+yobf@fe1f^DsBFx1zN=2`Zj2pe#8ND9jBzz91)us8dpGaUW3@Id^~k2a(zH6uyOwdZKI2FU3Zw?yhBU>AQ|}?0y}F$gT2HG`-uJZ!ok5_25dLH z{k;hc3ua(!g1OaAX4h`;-nW07xWXRxT-3>RmjTUOuC0*_d`6VQ~c~Smegk{x<+McF$ z<~rpAOPq1niQ2EEdHx~Mr2`zaj?ltj)_3k{WieF(n9l*I%3l2Rvjq_K-~TQS@QY|) zDgd<+K~9L;`u3@&{#3=NpYtn$pV|titpW=Gmv28MHcL)&r*wkyN`ibmsV>fy5ilFa z;0!LfNT(KCr6zrkiOo`FAy3#RYn$Cqxo30KHG`v`SseE(;B1(T@Bu{}^DpFtmkQiW z#yhEzjM_=^n-?(kOs2eN6H}iwiaM6C@Jk}6aRL)jH;KhP1SeJ#mRduMsDU6uF=+x= zYp)pk7k3CuED_b&f`3A}be0j4D+W1d7fxaGB+Wys)Ce^4@6GcbS~H0DPTINr(!dySsypoA-!J&L${6hvi!@X&PLl zdGtEX;}2vIkel8lmc1r=4SZTLby0i=OXjjwAZI91%?QDZNX z(~Hm>G6)J1^`q0Hi-<#~Q_Vm`gn`J&c*5lMV3l-2J&sBwOnWVsNO>F@ZXi4&p2(O4 zEx0^9BAV#96m+p_;U|aH=ieu)XqfYE(y=dkl2z9)gUSuIAHTuoy_ZzC4w6^dz-u3T z#2fFu&%=igsjRJKVt$@Czy5vnc`ChC6C01e%KV-8S$qC51-*CW9EkOGC}f{w0Y}`5 z`0FG(~=;BcwIJ%RnADOM>UyW>nz*Xv0aU@(fpNJM z*LRRsP()m6CW#rj0>g63>N+rF6p~R=Lv&gZ^}VwUFI+>PmP=dTFx3r>1j{*BDeyf4 zVzrVF{;_$42=qOZ8#(5lE-jON4r;zN0lTOwJX71Si>nj$tCB**aoA4Wg3<2wIjg`- zdX}G%*D}eTV`jvaw2E?m%FwmPG|%pE(KC*a+%{&Pe4C)$ZgCq?oU-y`VE3Q)!i%>t`MkiV4o zYkJ2;HKfxuI6+)gGyxtiBt`|1DmQ|OTO6ky;zZ^v2&%axRT@%ko^>P=AGI4oe@pmp-8s6Pch`R=9$fndA_K9v(s#ep4^*N=z-RC|OE zOUG6VAp6wZpRIsUj;f}HS`FT7tss~!kEL1X%K6LE)Zt!%z+p>2(yN=8x$%&S&T%$g ze3#DE_qCY8qxPa2joe90$w9AAA=p2Ru;2*7g2IUijY20aJS2+9uo&%egf5z}@E8K+ zHI=F>G&F*6c`rOv9tTHi@9T7t@_IPI@|l3pIGlsiXkB=PO?ZVsT+bo1Kr(B4sc08v zc|;7S060)e^h#|$prm4APW%Jx-lC&-zLHncX? zaPP)4owZpQ!rZXDbcDDtFKsp7)4>=gOEo7b015LXD#VBNr3LOje5HlKsObV#C~M>4 zy8^&DEwlDMxj)KV`sF*#QBc_^cDRh9+A^DE)cDxMFzfs_4{-#-=chQRR&gn{L&lgyYUXrhFT6- z#RvccxGEO-XVQ0np`iEoc2*rf-Cg|^1-J{r|CtM4Wc!j8pqdC30E#qLDp2hK*3#ts zTFw7`!r#bA`U^Qpc@3R-#|i+4C#7@6;O*&xgRL2v`IVRn03E{0wEdf^OrqM_qmpFq zu}PH+n!z5&Tn-ETP6ifm(pxUPO&CX=qB!fTz$n19OT;9)fh!U9@^2GG?Fb0e26#0` zb~zN+*h<>w9&+pLABweT#o9;D&6i(eZ0(*vIg3|c{Uf@jZ{rf4Lw)}uHy*zw%IpPR zV&k5E_#@iHn$~p7D7|!(-kBR(8mYqSK2D#vqo%Bqjj3K5i!+JzbtBZvk-XFx+-;5U z5!>q}$FlTj0iroEVu9P*TD08*!2%d}T|6TzHyB;r*7C5`O*|3Hs{)#n*<%(j%1^a8 zfuTTMKzPJFL4Y9&Pyl#HogZ_7nhJ-pNRd%nl#W1A6&Y7aMh}RZ-giZ1m62u?D?c}$ zLpFN(8NMVHS24eJpWO0R=5C1{o_|9F;Bm)9j$ZM=kSG8!q!AntPN=|7r3=$QC{PPm zU=zq`31$U&pgruQ zBeJ+`;XqkQK1tDm+*uvr>u=oU8*e@28}B^j*0p&C2K#vY`g`1Z<2xL&SCIgra^0nw zhs*Vq;}vPvF>;M{9J36-U4CZ&%r!#e^SEg3jc-&2AqfTaEbNfeGLBhb5*@=<%iIT_y zL2Xa4S_PId;&T8NGokDqID{%rqA8&WL;CU33H)7`_Fo>>`izxsUyQ1Qq_Q-LM zgWSlD*&OmH70X-75#MZ%xQdOf8Di|tyR5(SLpruU#3^f7K$yZok9-ch*-j^;M5sg(EyX+-(C<7sD#UKE0l zlbKjxD?F_)X*EIAYH(6)2t7SrT$7PCJRt+$*i>3ZXPMmGp>5_C8O>K^5KybS^4$e~ zdjx!1v2gWR<-$8HH~V=3+8MP$K1x%6do0w(|8#+0sz5PW6r&z%U4=lu4*QTYJmcGO z(YFiW;5zp0*D9LqrWtJkrKN3v;)*6pYg!ncTgTZ?$Me_U|*Atpq zC!P5g%~N-1nSYLWstmy_qLsi`Psdwq_f)-qC}{II-ul;|KgZS~&EQCZ-V1bLW|6y+g29>08(YfnC4pMcygu?~-v zdTgS~FbOKc0LVZ$zbU?n<8E?482fSARfkVhCIwaPWS2G(lTt`TVgXTUr4+P`;uc%L zp5vB;6|_^(vrJmU7|Hb$@-wQ$g+&MiQ#Ampj7VxLoa)=3svTcS^2vWH9`JJjYVm;o z4<3B+?MnrqiVOO+Iz#HjXdwKx7L@smUwi;79*VUVp;U?KgPv-VewX>rkm|&Cn8Y`3*D&J z$^|o9DoP6(ZZ4)gQ%|^$GXbtP+Wt`=CvzZ+L?`2~ z&tg=m%87OA`qwDw+SKMicUO27{Nlv2Msq|)`;+pw+4-kq=97+9U_K`uTLHqJd2g%Hd!=R__F02j6&GQN0&wXMh8di@9V zZGKe);4wK*3V;d8ImE^$YXDT>(}hM76B$QrRJ^FXSj`5jY(6UNC?q73D0w|P+MpGh zSIRI-rzcY0kBTw~7zL7HI)asIj7-K$0B9Oez#%IYt7s6l5<*qy6vfr8G`DtASXxd+ zT?2C~8|0Q$bN$v`u3p<6monXH*@?9I*)?rSFi^hOuxriIOnEv(?IOCv&nmsHZK?f)%pAIFea z!{EX-uHJsg=aAybc7mIap0V}#O)feFYu0*NEOJZ#1Py&tbkAO=ylalW=?#3c2IlCTyGhgR9l}co*<&g0$}x`9);?VO zOaZF;KEgi@e7h=8&HKx1@>tsu@*BADMYb;;fNB9)ofx%3q~-z@0Dtz&U+^>0fPXEo z?*ecT6ZdeuLSt}t_aIp8QAt?^;f5Tsp7|Jgid9jzPFX+)xsjEXvr7^6m(2;k0#3W? zNi1pR&;Ik@YAJf;S88(*3b21JZS}n$bI`AXqtcH1lySs4>$8NJ2?91fdrgAG4!U9O zr)OzLB{f}VYV{H08*g*bL*Q!>#bGBs7d-VeO|A>@W*AtyOaJmcZKHT;*EG3}1EM-^ zGIjk0$;EZJ28J*;D%RxM6dhH$S{$H?74vto#!nSNQi0HRR|s*l5KDZC;w%Gmb2B`B z^Fw0N3JH_}p=*4Np3zmY*AMAiddU&%SWN})SCRi_0ts^+hm3p(h%ck8eVX!~6^gsB zl2W^*%@6LA^QFRGjyMsY>ao2%RRXzm(he&=;oUj7iH0I`Ge85L_8lUb_O z04c5RX7&C@)J?q*m_}+A_@tQ+@k!a50#p`Q&Gmf_!03oLt+1485n^dI0E$A4iZqC- zPtpJws-6n~qazH&ssi0n@;EwH1E7CcJl@d-n9E>y+&-Ses{EpLFwOmQ+<*2akDffE zp{13sfk9rr^&UeLb3AzZlI=UUsS`M=f#dP}-^V+tmayy=I_K}xFmVS%)i^$xz39r9 zIp84oky94?)ylY7VYL-b)f_%*lgNJKK&pFJnZ5pu;pGRk4Ba3;rmzssh4{@TsktX;p!lQ-Vsg;KQfB}68s(LdNq zRbf0+9r=tj=QGw?LTOek-R)I8cygZ`51(rJ2G0qc8aoHsytYYAQ=7JjcyjF)rK0Yd zd&kfxB#~cONN}(}21B%5%P0+o3WA|ANkoVu%&YBSaYydC`7IeFw;0+I$J4vPL3@>L zCX%zZer(@;q$M;_+1)<}pt8T(UVnM4`rjv-GW>GemkdCKA~iC|i4hB|nwm8IL@k0y zQz`NPv$WE-5sqGQ;jFP8UcLdu#V6tC7bF18#4{!ruY`II*~#c_BTdcwsqI~kGID$6 zampu`3vN-Y?uaB;C;d~EYHRlb{5Sc(zmVe({_XppbbUoVtH+~`ms4lI#GVc_`8`C=x#=FdW0y5 zi{z!oGB`M>mHrGhhLZ++@GG+Uh2DP3@{M*NaV*8`3Bc>%bh+ zY9`3*SVLDlM0CZJSp5_ZJBrm;0m?2(9JGnXCMb!W=Wp=g$3J9t^*S%U_9H(0qyI#Z zSjG!(5u}$jGB7^D%H}q`!_#cP_%;nQuVnCv(-hzdQ*RA`+9HTH2dFaaM0^H90iLKr zr2rKG74QOs1Q7CmMC7gw4h{^H_an8>hlR=KBBF_mlz%76Q323RmnVv?K-=Sd)GnD5 z)}dk@XL;wV-{QrK=QK1m(myoB`yYLc$@yimz^`-b{w)g2N|{?)?diNze7~j1PAP*IcOWrSsPz&+Imgg#$*ypRjYOB{VV^<96MI@(YY8}VM#sPCjZ|s8N3D4_B)pStSRqbrh z0O*{_5sw_s_zD1Bbv$_OZEaQRCqMZKKl$m;1+>5BFMsxH{)1elKM^vTqztf60C>Q= zn!}#u0yTl3nh>{B9YN(z6Gb4_NNpY4YpDW<1(4RF7VLB6bE(=^Bb7l!EiN2X@pP&h znWZQr%WxV7w?r{)kXqa+H}x7hrL7!0VZ>-(FZb7`X|K%J6riKoIYPW_!~z==?4{CT zT_iTx0axn_+TzIc^bBu(_4~wURS{$;V07gk6&+I~7WdIK{!kR4K?C4^3sHckG1|7X zy+*;JUIRE`Z{UP;vU~?oPcG^_iTzc3el2wJZ**eyVzBUwr+aFi{;37@soAtmtg-&` zTe!#NW9%Kt_LJB7xBvdndF`F|c=P?Q@q>T%SAP#cwdePku_uWsx!NL#QhEwz5dtzb z7r6UeJ&q(yUJsIM7!(ptV6cLqz%o?L0q%Z2QYQ*ALN&3=QDT1ufC1qNxQ6FqHZ!)sDPI-H`fO3`A z$vJu4Lw)xUexU(0Hy2YT09+cbmA|2ozSas+rP+*54zPZ6i;57JFUuIpkTuNq@PKog(R;SkzSCPk-?VKmFM+G|>K)!0$iFYY%?w-*P&< zmBYT30>2V%G30gg!IX3?&@y_JCTT^jQ|QwxICa*P?36@0D>JCb(u)EV@Tr|2(JJoG0$&$t zPUaM*MB!;?LVQFZO-;?ruHD2xDg~dYG#PfQv3Cylsz|kuhx2Sw_O7L?4hN$;M0jgtQV5kPZ*r+(7B4V|&2Ql(ECdNRRSmHokBJL3d zq5z9IAlChmjVM4Hopi)0-uUXb`POfJpMkL{t#aVEe*5>idgl?(-g=j(Z@i+Wt&QpR z4LPkQYHJ8%6i8_&N-{n#A}dv+MU{R7VXS8~8fAm~!aVdo-_$#K65gch}V z$TETq0bWk?I1Q6GXqvrEX5Bb@jyZ7VqBRvIg{;ku(pr&8sHZh{CMRVuvn4XnT@<_# zw(>m4!%B+GAnhE?GG+J}oMKaYXu1HFZsO%&u&ZkX1=WP6=ftrBs%e%C!i>ppVe9+{CJ~sd~8< z326k!q)}YcK=<$fahZ9PwGGm__yE(;61nH2wCR*HR=(W1|5RJ(P|8os@T7qES^pO9 zX#o79c6O17G>Zx8*1P_y3du z|KY#+OLP^J?DwwXL|`q4-3vtt2+V9m$*F}DvBGLj=%9_VL&_GXa!??vg-m<~zoq zU)Rzd?GXU(w@qM=SpKd!5yNqsTtiQD6Ni){_E&+2RLOBgimM^kDk532k*Yg!r}@aeB*ok@L&9`76!A= zJX*8BN&&`+N>B<=DZNN#bp>z=fa1^QD>sIk2z*?(l(On&PlO%J8TJ*Yg;vwKb z+StU@#&tHIe+Ac=avUQ|i76VA@7628ufxq#*g!;KM)ZfYa_C5R)iU|?*r4mkb%v`5y>6VtJ%R^s+ky|uJjNPg16kxx6 zhxYMV=5E~P!8>24eQF&GZymwO`HaoZur$+0g@EtoWFws=iF8+H(bG`G&b2v)2D*9j z;uV`W?_loW!p!_6J6kh!b=1=*?=7y2>P#yUca@`MDL2GMqK^t8ElI?NLDh^77bPyo z_!P2>Yw744Vt8tl+=^-{JBI07d5m#zvGf_emJ^{UjEeI}=a)#`2*?rE)z+TaL&>lCuawyJM#GYwQBy&+e7^M8{PcL(|&&Z<|=PLxxxCqN7N53 zamGPLZ!=F4N*j3n<3FOJcb>2O!GENE@hK;*{BW1^|Ll$T`RD)gpE0?x%pd-%Kj)wQ z7pR?lt^x3K1sH2c*H(cQ=t2U+2@VLACcyh_{!g_)0b+1)xHgaltB@A~UvQ94Q-&&b zP=(2a2ryMhOtAc%;4nEqVu95h;6<-Ij@T!1)KR5&3Z+35UxReWwt*oEs~aej!LoI9 z9z$V0UZNsv+FF=iS!8Bup5d7Vv3|>98^?*34zJHDCn~*|h|Ef2i&}}uZzZi^iolEx z43)FQl+B2uNfWgh%YM0zIc+nf*7lNE)kFEf3ONm93@_ft%-WgCvI16Tphhp2FHT)~^Y~Vk3Bb=Ndo!?l<`- zfAUA%y7z!i83?wYyv2Lp`xAlahgiA?F*ZHT{A9mYXL)*Visg-MlJjeD_6{L2Et|Nc zG@=cOq-5q2pOQgTToS<%dbtL1^iM3y^N#iQ z&;3U)G$Eq^sQRkBEAz8(CxS_ET0LzD;ra ztk}tTPMkGoW^9CKH)d%m%Ou3pL6qKQBK({+1?b~!j-QJu3E{4|TA!mN+rY%cIIrIO zCb4Oy#Aem7eCsv(W^ORL{(`RMSE5o4qDm9AN&6G_F`Tz>!rsP&sm6FdT1@5lx3c*0 zW-5QMUBPc%Z{yzT5K~vLij5xPlx?WC(LKAqgZ0PnFnskP6F1+)%}^-=izD8;B;NSo z>-^wHKM)9SYL(W$@yGv(j+J-WYZmqQ3Q)}f#>6BM=ocz5(+T)Qr0WeG+Yv2oxA}ln9pg;j+xPhREBn^O8yvi~@{MJV-uFg|fUe1oF!|nUesc9e33NY36 z3^OEf8C<&~9r-rn+pkeKwnNkOBT^fd1%N5q2LFBLffRJklHEK+cup2(p zk+}_-qR@xC8)zt2VK7!$TsTUysHkL7PcGKR(u{}>^1vX9UhM=?)%hkD*71tWB{5$V z`o<%ov#aTrK`p+thk)cJ&O60&)YOj}8H~o)b||Rt)wa#`%MIFZ_V`}SyiH#F>uD&E^72~f}sGS-E8t*LKOxdsoXia`?Ohv)5iy-@it3SvR$VYYbg`llJwu1WE}U z@UGxkP!0QiO4#RJ${x=W_P7^w(6fx={$hPa{q1upVxO|KVsH1^$Wd&qn(y1If@2lr z)D|&;<39U*`I(~n)N2ZWN-1i)2t+N~s_kS+(p26(Ra7RD%=!rmTPLXQUn0MG4Cg=r z;5kc*@^Tq$DxxCGK%k2?UIIRSmdTuBLaAi>{?lrR@!101z5 zhn5jlV`G}rHldWY$!I<^yl%|I8XC0)nxv zw`f~>Tgx2t`6_TqdVv-OqhO~NK{Q1t$Ill)KA!_rtG;S6%P$~=KmlQ(+BKp+E047u zBmz&hB`!oj7#I?ZZhwiJh!%>7b!!kh!gU)D6s#Qqf6x zb`zo59k|9f${-joz}2%)2C|Cbbq#=qvUVCLuai>VM|R~9C(oJC+EmTcyIXYDJms8z7$emXo(LJ-xd21iMqSGj9=q0_RfrOkgEpdbjkS=Z> zB(0(iT}FkLE&ZaMA0|$IB;}QH_2v%4qXW#&PqDBv&(h`w?SmssEG{xWKg*B|wCz3J zB&4KJR9Z$!MI|HSleBmDiU6skwX28Hs%lCbTF4L>miI2=5G(GDJmvVjS(tEk6HxDtZpPQK7#@|7MItM zTTn?=ZM)bWmD_JYV30>pR3@zhOY}}`(K@_B-`qA+H{W9V!8Zvgn&Mbsqkyl1{r*+# z@s;LX#a@qcQHAB~cNHkQ3KTWK3Cu+09k9z|zZ{hv)<9>Swc8W`?ef`Yt->X;+3O_# zMuknt>ne@FwSy=#R8O>oc9qqFZF%)$Wo!clQ{0_;5O&mLI!N|Y>kGE#&sVgGH z-A-HdFzCEQ0bbVZZScPq>V_swk4md)T`uYGCjh^^;FD z1*r1+9k-3*ii?hjq#U_nD@0KRk{Bbfad*JN=q#p}PUB*4ftSBO@%d%c_Ah8PL$XBC z)OAeq;@$7?#)lts>*?D}tnLU{UT1atDWi*<%x;SP>X{&|w2gtams%X4vcN|~k*Ppv z1wa)Bv#a<7VgfTY7pQiDC^j7qe=yU~$D#tCNGI;&+RZznoW`l|=w@N-Hp5F>EZlxc+ssXduf4_C?Qdw+ z)An0OanL$MEO951`E_Iptdgty1uhNbR*!JuiVa!miOh_2(^!)J_W)GMPty$%xZA00 zFsF$Oa3)R$xbOfs2722Von6CKCvGOIp2|*@%6^W_+CGXq7l<#HpX(&b+SG&cwqdS6 zddA$wO{Q0GuzvRy9pfsrYLWhhYb@M&%=r2paRVDH%Hyo+PT~q18N2p~AuYb}1|!Qm z)OD+QyLzUUmbv}lHq-OdY~8%Z%Xi*nPMpA7U-^Kw>l`HYIy%Ptq-wYRanxyt{@65SjlE2--4x|A$H4S5Pv859rR#U8YUyWY;{lxl#O~$igcVPql5y^_ zRG}a7Vig5aYQN{_+n)qpD%54aor0WFa#K6 zy#huJl*%Hj1Op0ycF7!;j&sx^kcz$~f>TN{2sFBu?qDdWW$%fL6c^?)(ppMcMl1o& zRsui^qJrGs(=?1-C9brOfQ&W{ z$?rQNw)?2LA7w3K@viMqn4d?YSh2c-L{TRy@1UKwHLJEFo20Y^BGa?TscoU6XI$)6 z4TaTByd(DM-~GjZ;K7R*y#C==`P2XJf8phazs=Rh?{V|ZZ_&MQmx|ss9)0a!(7O1R zW`R{Qgu|EJGyp0KygTQo6kjCK5qfPWh_=fkJQm$&`+q~j1aM*UIbD<%7Z@Q;7pfyB zQa-OT$As&(@}^;tNd!cs;2B-Q1@8h;WpQG)5;%8+d6R^^a{A{s znUZUtQBq5GNhN>qSzB$oG(Su;qZ{G5v>)^xPi@%;V` z#yV?=33SygaHzKvQGwpL*_vW+rse?62yn9^I@E{hi9ud}{~N^QwqnR{p<`l0AofrO zqa~WhZgKE(kXDEJgt-sJO@nMdd5y*GdrYit(>r&S(#}zuMXmSC{WL0&YaLmox@V4s zTW=DUR)a%m7L($LdS`aH_V7Ixu0Nwqlw?LxEj3Lotgg;6A}Vljbda0(Zqd};#`Mw* zeM7y>EKEy3lY6V7mbKMo+FF}fT$rW4zJ{gMB_?JjwK>(nnK|nEhM3xZL3HVmI3Ar0 zgt1(74C2A_*QF1O|LL?vX=);}h8xIsQs&gA+A z^P4wm?VsZM{Wq!Wnvt9K1<8%e#8gb9E13`&&R`lY_QpI}TADyHRY0b!Y`O+PEh~yz z(9l+X)tufg__Qo38UzJ?_6nE+J!?@2@}61^RsdAEHrDl?)*&$O8{s6M>)>F`TmY7v;81OGl3=JsW%-%!%`}rYciM zPOK*>(H`WbN8sh>ik+Vy=@r!su3jS{znC1cI8WbrjgNo(V;0tzc`T2={kwm{&1YXB zyRMG{vE6YcorGmJQ$K!RY~jPdUjN#WqlC<#s~o8ViGk7YI}l}B2+=n zQL%(YL=hPstL^$wdx2F_1buWoaZ!o#?*y7!YOFK@BU15-Db)bD-`XG+IFVyke)LSv zQPtYTuvo;Y)h(I^CRpBi#J7L{pVK}xNq$u=U;EZ~c=7Z(bBkAb^DE!u`jZa{POc%d zZjA7(CIZu1h_9K)IiU^X;3_Wrmth)Qja5XeHW#e+Ngp)Vq4ph@c21MsFicWKuNJi2 z(6`L_D;A_A#%Re9R85co7YnT{W>RF30MG|VOBD!xfiNFOVuL-15&){YzylKtctjNt zm)A&5_Y7TATa>m>lTkg6nO8PvY$7;r?kfNsqOos`inc!5<=+&^;9k--N=fG=%`(8} zH;>RPt|vpK>|cLIP*SxF4q^1pKcKK~l;MRt)O1XXNLVK^yPT@}1~%8{n3^1>w4#KS zjTOr4%IO~LqPwqyhUPlC*SaXk&tZ0Ig0hkVh6j5nmOeN!GfqcuCp{wrH1zZmnUO=I z48mdgee5v}k!z!hBKc|nR69XbF(m2QpY{3O*uUN92o(QkCVbKDO9kL=9N_M1kZPJV z76qslM1C&MH2})VDrs!TJtUf$l?^(&dPQYqla`rBl~@BKmvAmSg<>L>&&)Lh$AAbr zh9|gw=dLKm9j@Pd$*5Sxu+%D=CvPxx?FGxvzE5n$qFgY&z%E%-n*dN-Hgc<+^mV4FDu-x5ZcE~D1ZiZm3aCdff z5ABoJv^YT5pm;n3qN%H@q_?4nl1u|WPF8pbr~(CoUe1>IxJYxhAW|UZZf8nnats5* zL)>}x7QWG`_#5&lY#Spgzn<1vQNSyY*n7o~eOH3ycZSR8|AMB$C7gUC364y`KSWPR zL;}(JbOOWU2ndVC*-zjamY~%Ze)k9e1YMfSOp?v;+!9x}Z_ze1!OGni3}1alY5xwV zT+=w~mCqUX9FEziU=vYCZugG11LdTe1H9r%Mno&k`O8;FQ8sfz8U!hRN%? z&=^sHF~md}L={GBSzxr4U$MsF0>E7*7(uuwM4kNGKv9i8Iyq;tMFJgr~G^{RYtJvk-SJbm>BEKW9SuCXwN77SiB=cb;@n|kf;>>tb~E9_1ZVB$sw-3mmOekFYO@Y1>{MWv$GxN-Lm6Vu}q78Ni)K1NPi-z z%5EH>iVMI*?nf+a-4}b;%+Tr`#;!l*##_HbQr!xBOrix|qSh4jMD6X- zQfMgvstxhGR#z!L1-^YYx$?O@QGC1eg8Lm5G?fLG$4Vh;uvBq^YKO>f9=Ri8Nl#b= z&@i+{n{=A=@@|S-XNXQI(_+UuTU(jvuA?ATFYvPW8#!%<x_1hq! zb{UmqL8;^YDuuq8flI!k7`wMQXc@zCyEsl6dr2oLC0?!22SpMYDRws|Mig8e5vqo* z*x9JhTBHD2rN>f>9y)EYMC`BtP^}CH2Zj(^-be|8pz~(?J-N>h>Kizl^xqj)V zI8$-UxLC|B99%uf&rD>byPnG2cul!G7@x)v=1Y*Lqo(Lx)Gi+ZV4NsG71Tb~uT<+Y z&Y{_;miFbA84_F>vvzW zdG9rb7H_h8=M5S3p0X)QUFAqjt?uB)%Xe7Zxh?1BH6FcugIDi-MF02-V+%J}+7hc@ z*39743i;Kd=KII#oR~$QnakwjA{$#9q^72jmYPaqV#$^u&2 zTd8hpqjhLX&doHLRZVj5bP|)8&ci3KGyrPtGuSER_qqC0dxF(}znKePT>Fv%s1`lc z+<=nBYI5|mg%D|K!t|$dqW-H|1SzZI*kx->ter%jx5?-X5((W~q>sL7- zP*>l5zXHFU2a}L$vN~^Z*hr!Pa!%ghUBC~5)%ws^}KjP zBKp`wA|nihhKMSZrqp0uRDx!Y6$B%7dJ^L^H9e!`*0=HcH^0ZNSMM+-o&M^RkC=b- zUC#NG?yi`-sIr@}95nWzd+`Cc-uV$Ho#W;DC&>3qmG3MNw2hbR7)<-rHuI{w-}(bl zftwUGj#J;e#<@#YbhkF}?Cy1j+bS`HdSWFO*bwfAubVw?qTrn@E{e*x5KHV%tS*qH zg=ua*dJV7GLUQT`<-9M_Ik&&@NFlnsv8S89Wg0+4319`DyrSl*@L9iYzm61DH1hZUS3B{Z8OCs zRg?=jtDCy16oFD%RZn?U4OMmWJHsQmbMK*+2th@2Xev;en*LMSVN^1NU#Rdmq2d3? zgD<*$=>Xhq$_D@Uicv}ds?{S^6zQ+!#7(YVCoZd0OADTynl37^g$l8c!65;7`?#Qw z*HhKdjH_QHo}n4|>nkzw%EZ#YkfY`X4ydG{*2x@Jb8{+1yrtT~Q7-T+6-B4!@6=pg zq9{E9n}VA(wFOQslBig}y#h#Wmxr1Q5(sEESAeL(V|M2Uch%osrHsT|LOFY>ocqJIvgCMPy1bC(oMFP*cTZPc5aHaau0GXiPY()FcdoKsG=e#d_F9mV% zayWa>hj7>^k^`4Q<#7OeE(XYF0yu6H$szMl>>~2T%F5_p)Id&6Gj$z(tZ(g5-O|tc zy|+YZ-Xx)BQG@zkIS*RW00D!AuAa>Hn;a1Uo>gEq^Cek2RkQ#rOcY*fawaK>DWr>% z$V^WnIXRKIxOi#u_lu?4!wT93i`Lg4HMA#5ppTvkt*bY(3%C*MC4#Sv?75HCz)VbnW>& zj9q&|S>HN_nmLX*=WxU^gA=YYa2ffCVlLv3|HI$%@1=tl^<5J+7^8h(HK%*bE?%x< z7+JN$YO>b=_yPNcG6Lur!9h5Up_%hh&TQoPIx+6;wS)A zyL%!8fGLJ3Muz$rm|Vs-Fj*_`lwI9Rb>F-Ob6su|d7TR!v-H){z>RO*qJChQ{)H8) z#0J+7O;gb`$6Mp0(HEL^`Uc6o`Z z%{$cf&5~4DPie~#{c|@-E9<6da1D>JOkDk=scvk;Cny{TXHTsdyQPf>E^YyMdWRAc z8i$|1^fg}{j-DYnIC!V@8Kiq!@Cgq{RZ5s3x^ zF7|eKIN75M4<#)-3s>K8Y&@d4>>!=pD3IWUS{daUu=O?I6q1BPP!eIOl>{W!?PkGM zbAXp(1zrL?HLs_|_3f_ss+C<8+qYN6{Ao5gPdn~a?@K!%ukW?Z)jq$+M*gkXWd%c3 zT};`keFEE~0tFRdT+zG4+^yHR@#-6_Jotc!loC!zr%_=r^MlP4BuC+8Zy^vg*Ggjg zx>yqEVIzvrmQ>QP~xuoW_}1 zzfE=5B-dYjgU0EH80yyLy9@jsGCAUuq1jN&&`Pq}Z?Mlag8gznk6m^b02UD{7FUJ0 z#E626iiww_08Z6gjuP7&8bPe6!r;IFLV|FHYA}M(&{(1)6NnBs$T3a> zruuna0WwHP=d=mP!X~ts12zUx*gA6C#tF@7V(RWkm<48Wz#^2&!E4Oyyop<62Fc~k z%|iamQrNIT<)@>BHOK{4IVe_nOKW^y9z$8MYCPs0>2~ zWH38w6T@kn5H0b<*vd`T@4wCBop;2l4q)n*#Houm^mMkdv$4ofdj$y*KA2xTN8kxWX1f(rd|Xo{`@fh)&)w zZ0skys+GopY1+mY=wI5QZ|MQmgFD0&&!TER@3V?wpUVCt?T}g}7u$ZsDncL{NK{58 z`BjZftlglvxtCG7wz>8FVp-d19-5`DdxCTs{DwvC`|2`q4~U^u)SZimKd$b+oH}!f zlV>htZefp=l@oThZkU@pU~X!~h4U9Uf95O~&Ya=YiDMWUUBb!9iI>k`?pj`L_lGoX znoEvyewD-fO>u!=M*BYkfV*jOcHyUvT6%mrS*jwODvaJVIE`DVs0Ha5ZmvEA`UT_S z;Dnol1O9HVc)Gjd;^~f)S1?{-X?W`LIVb>h4ap`Zt&+T&Zv4cSc||0VD5IV#;#@Pd zO?>qdSv`-mA~^e;RY4q4Pxb}cLdPM8d=5G7KG$}6NZV_h$3BNbdB0GUpjr%3v48?i z8`YE=6fml-a<)oEsxTNCjm-l@L2XjnIYmlE51q5O@C;Ao+!Z_Os;X!$%OpJ}7-tJ3 zVnck;`MV1QtqJzBBiO@^Y=chTyG%i5BK-q{tlxY@KukI@S=CzTM1Ve*(W}q3LQV%v zbnI1$PEDfZC{U8)eu1IZjKZ|z0n=Fan;OK{3CJuHIA9z`RDLfjkH1B1VJp$O)g%@- zkXPMFN@*K84WoqS_K?`JCErykzzl7B*ioB!tix+4=zAaoNi=7j1QbRdWaXEMB2OVq zY>-NG6&?{wWMm9ck!o*nB+Az4MCJsq1tuJYjJABTjhcb3&!@Hw$KPVOtB@{a63-FZuWn|0xeX_#K?}?HpDM zEiPGdu2h|iK&rZ?xO(R~GnEDgiUly}dOT0KNuNgo#+!VnqJUohccY%v%PIKwpSobK#3@Uorq?Bv3U#dMx~W$p*j(1C0eSbNKxLg>D9!E-HQ|3o|svSK?bLoFZp7_8z_SHyK)etW^m-CJ;VvWJ^})M1Ff8(kgET)p)G*O+Wd1mfe@A5$j) zRP}cYS|_mfkJt8cS2T9v84ylhNhPh_ee{n{GPS%(|Ky6crSgcV?z7@D((6Ytc8^9? z&a(?h#L_f6aGC?_c;o4^18{JBeC%YHZRD`A zFSb6h_=)PPXz0K{G!lFF0P-t4xc}ZC5STrTU0fT^$^9I35Zh{@=I_J`tCe3fd2As^ z)dYSATr1e?RKh`*G7dP2{c z!^383cS;mj+%qus&cN6!3BROT>c?&h0E$A|paY;f15u$6`pzBS4pny>BA6{z+K*8^p54NlV7kCl&j^41s1U z4*qGl1!UvomyV-QGSLV=a6LFr6arhMd0o3O+;8I z`PpgYiM`dA4&oSHgMY>lXWa8R;+RH6$rx!(vs`qEq_Am#d#}CElegaG)@vUyvhkSC z)t6lI7X@h&Nm9ci!MXi15Qtj39Ki`^8O*N4$Y3b$p<+eug?O#z@iD6qO1ox7Ijv}6 zFg*)*iOz0j&q*gvU$CH|vV@iCemZKh2=lVR?A&3Zf;{nZw#Cu%GS*j4YSrOFeeH;g z4rF3%fX#bPa1@mqo?Az!{8*a|k1Io4oP<*R)v5m1{e6^pB8NEY7K*Oxww0eAyUl3k$7Tn3!T?Zi9oB zGnQh3jV@ji_?^Sl=!!fRfnsZqkEb_ZdG~!S_T|@~sLJRHgu4qKpYIJ;0n-2I7eTa< z;Ip{D-2h2>tVRfVtjz%m{QgRt-32xP0RQw!L_t*A!p(amoY7CQ2^;{gY;!CDdo74xT5pR&Gc z->}$VE2aFhIi!j)iB&vm6U%Aq5PIhC5G;xK~c$2b@DfETy zb~Ifw%SzXPK7_8E&EHc~*0lIM}y*1Q9vT2zIz!nR3ro8)G18YQi|kJQR8 zGAcTV%_^t4Z<4UYe69X(`M?G-)pP83P!?FgF1GN5b2=xkI1=pdDxJiKlSdEZ8yb(j zfNk$t5B6UUkmkoeBVSRT{sQ6<`MuIE2XgRI2#4kGIVey*pcZP3g4ln_SBqghXcDTm zee&7;CMub$H%CnTIC;gJGw00+@N&b)#gTKz;qIAImc zo%es6-~IEy#luji#aF6rcjbLcq96q>U2~$U<_V53BiK;NB@=6!>q=Ok8)T@hL`#Qd ze)bR<@j9`=t~gkTGBQ0yh*)El5H(ik&&0?eYda5cj?N~ow1vun8M5m74ML}*BE)F(0+gs!B?XKBOGjnsC+&t;%9pdWFBNFrEKF=;;Y-Wze?p~_e zIv83MP|vQ@J+(sPz!X(|v(%4oU?lf?YR$M@3pdQ&!^teE7uDBFeOnLF38~b!bWvDd zOI&;^-X6Z9@Bp$vO~1@>v~!Z?fSZex0L~LnH*r^%R#=Mqvo6W^4jKhGE-BC4E86&-y3%aYh3NE6oBzX@}K^Z)*FAvugX8y8eW&$#nwcoXu@)Q`*$S?AAjqKVW9(Rr$VgV*gVF@M#>j zPsZHYj|TbsYf3Xo)<=+2(kQmGnv?Q5RY^@PjvTRx;kfAw7vELUWcB|A~ zh-9xS%p?~5kW~yv?Bx6ktoI1C&$?xC&Ml48PVrn8SeZLSiM?{w3dc8=6F0~zAC%U| z%;s~9Eo^D2FBSj}&|RNPw7;VO@Gy}9ZsJnxMbTfv(c%ogE~bS0*%KS?&rn}CS8qSU zMbw_YxS1*~5kotDi?=9i9pi$zJF8c>S(urmC_4jBCtCtMUC;&jiVHHq)5`-dA0Gi= zFSj4P5H;LFQbrzaogK9I_t4bSN$>P59g~X;FK^K{GEe91HAb&L!(0@4TJ@L=EFReV z$1psmMdICBXH8yDQ%Jb3H9w?y20qV4R`R(z#X@7DdHJ0P zo&E8N$R#1Ko5M!IoG|vnH6U7Ul5zZeL-7rcCcUs)tJm8wDYl_yOq9+z!;>?7^tG?> z;>8mlKf1>^KK?d0?mytY@BY33@*yde!+7Z{Nhlv7Fr$T-vN2qf+O*vsS_q6-XDtv~ z+d`*8Xi~IbXr%y+T%zfky~*g>T}IaKk=HmxMo9yu)lCfdce60uN&2=0x^`W?Rkm>7>ncaCo%ftp{-Sd=oi{e;(C`xcp zKz*0mp)I4q_3q#|Ys9sTk0+j>OR2<+X0ZOJQiNJ&^^tr7>WHyO~YazCvi-_zN zf${+HC4)p{G!tLYMpSw=d6nIiG!9bTK1O5TG!4B|RLI{_P}@ObQL|P!KEHL9(Ci^% zO2iTtj1ihML}dOLQ8_)t<+RIS*g~jQy1)|P#<+|i@K>p@~R-*VV{0WTDzfD=o zFy~F37#tp@r>zcsm>=%8=5jwch)b}?-qIK!ccrvk$j-@OW@(KyaY%8==~UNMQ`JyM zR#5@9-F>1~2g$DMkn7Y*TI~RtEwdQ;q>xlI%~3NyPMdo$G`q>QTMwyg?Pc-mOPahS9t)(UQR+a>Mc@h~C!o@RZxpeL#4))HtDFyi6 z`vN=>IU4+S`?MUit#O*dQ6T({O!#8kmkz*R{pu6#Y^dYs0Njlig1-?ysyV>e%u@Co zH{#&YvzQy3lNcK-u<+1E#1KDGO@7`)gofeZ5`eD&Fs)>mz2^dmOm845zm}Bja{L8^ zHckOF$Oyjq>|0z3$l;uAFy?liq$DTv=F?lW)#Pz&eVoz3W_tUZdGPWjH3HA6%|{fA zO`H_fSk|-1X<&vEkCMw~gbQVYXPL4QQ8A+3yOs#)Nzd#?yGWD}ZN zOykfTqsup_766vE&r#L0iLtw=&&%N)G>+U=TMB*xK~*Er2-E{Ozrgd;d29-B>{hg2aoj?3B|Nbxj zf^YxU_jvr`rM6?Ie{6zAIoD4<_#qQp?_wQNiCuUd=E0Si1y^GhDt||4HMU{Z8hFiv z@-gxjH&EEh;=T9Se)&zBM{f$eCs}>+d*~|!*rrMmib6M+W>v@`+bj-Q>SX}%MGlhU*V$9rl@y<{LTTICs!ETd?)}M6aYFhIyOdMdkyJ^aNMkn3H5T4e;bOEJP!17 z!QaP&(vlJu*EU2AR}r6@j!J)DU0*|4Z57Rf!<6?739!dxV3{VrV}_*qX;dlDgqj&t z!quZjF65N8GO=)#n8YlKDw{+Fj+2<4Lq=8}VL_o-m|6$~t+;a02x|*V9Bu7I5n5qo zYKpnhWz3|RUcQ9!rOP-tIN|Cl3hYO3oT{N?!2J75mi3G|0*Y|zGoC?Ke0ego?7@zMNuJD0uK*I8%+Tw#75EB z(15#dIQG7AI0a{GJ0ZNIbBNC>qP(sd9~sFUT|LPvDCPS7*Qjitrl>|BRNF*qMjEeP z69`Q7vvqZzsfhumW`=p~-4Cdj8)taoCVf*|bWe*Sk`Bu~Aplf6 zK|Y6|+FzWcWoJ2U8=|cqDz!B%DloS}R7*n_O&vXSwl*=?Qb9&ss1_(2?&l^p$xdKs zjI;F>yd5ow@^{7A(uji01V$&Oc=q-;@r_Q$MyyMhjNDzKQt}$dXq&!|RZsy(tPBD@ zQGlkAVuQu{UWt^)vFsPCdB`l9lh!dD69rh=Im*PwBkBg%X_?xgZT_hNikQVnY4!llvmn+YNnqFt%cWy*-=>3J#>Gten}k>vDb@h|ex%Y+;p_ zzEP^%dTEvcvSnh8hLL4CUZq*AyGr)z7+FkQ=`ap~$+Qj5QrXza#M~mzUMlfvE>rW1 zB&BAMktS+3FbMO@mt{b4F+KGEWXmk|G0SRKHA^udCeXq8RM0aJMtV+rffp=`3pW zSNQ;Y`-fQ;kXm|#W9bv6?bA)K>Lk5pnChXM>@yA%*u_YTVxO6SPk^Va?;!!xK2tr% z1OjJObvUs;wLPMg?!7Gv@D6pO+Z1%I3cSKeu3N@dS1al%PHeou#!|qipkpC+Ulp9v zGGgaTQ+sK1w~+5{qg0`McTre}98<7~Yvzi7KIa|dIc+5>yD*|Ym08p}NB{b3G|xQ6EU-`mv1>v-Mg7+(9oiH0_$S}P9eDMhi7TEQXT-<_7a2&}66-1@w5h@lxHmic3uBl1eapmvhOMr(5HYQi({9|Hyb{83i)h`qAIhMt@@|8Tt^MEG`fc;3l@$ zM%xdpGQb46+mIOUjl1m?TI))fnVsj}^Y;l)%tN17#rW0RbkD9aas3tL{o7)7MHva` z_KC_-I|5X)2lf1bQgEiCfUFY*$njzU1%UlCTz~OZ#;!i2b^4YlgPWYNk0qsk6}zZL z`57r3wikt`_DQQ|FZR(zRG$EFpHm)twa}kz4%n&rHMJ*tcZK|bf}?gmxdG;JN#?--+`_EtUpa14>c<}5A(~FCI`};rOwGTgH{>E*- z@jHLa$ifCKBXhj?`VSes_7o$pcmdrLYKGUy6=3MH>qOmb(lolJW&7z`d4iFTDAG%! zv_zq8$#=Z<)^|l6KBaT{C8Kvf#x_>|221(O6&b)x<=mJ^GZ)aCNi+WJxv9z-skXwU z3E)LFTSrjXK2LtrhzuC(q&JL_-#ku5$26waj#QLnGuqQcQ+X!A9yXYsJ)-4dRB?db zj@DW*yIRyri0~#!AHYCgBa@=EoC6F3s%i!oMY-1X(>S<9UUe7eOr2O{q%19_^=B$+;W-gJKI7M>VCX9==((J-9b&D2P zl!}>$0V8Jv=bfU^_rP#AG||QLJfAI zIrwDMVdNbv7RQU3?bj&~n{)V*8{PAF$?sU>m~A3fVYQs|EW$jpk>j2P7=_kx!d>kM zkxnm=P=MI4_7khUzyd|Jr&s|{ZG}7M7(s_v;A(-Y%3fX7H-nvTCwNnMKVW&|Dvj-J zG_;>i)nev@; z`w_1T#?Q?`1FE&@W!#+|u(Gih_}UPcQA}cCtH3UdCQ-W=ZDruw zW5u3>w(L3K#1-clTtc%rX%WI+6)b<;2Ai;Ct)yslLKX$(btGqI5tEomY+@2M^>rl4 z;~+nO8I*&tGd087=rUH9FX1XSSgAq>D@!bmjl>pP;Obzf%>iD%co9bdpofR)aqk0BSB+nsjez|HuKTPJlWYYHnaxDyslVd0jo0_IGL#MBtcJ*2G0~ zSBx#}xpMh3MFlxzrWx=NP^cVw5uyH6l$GKU5RSdS9{+?g4w(dFvx}1P}zcsjW_+1*Qk~EPq-)*BNkFr zm1cQWMig674`M6#I*QV96a}dE$U2GrQ?G0LWmDPjl)@pq2u|7gGqL@IdHLC$^P(oJ z+X;w{7eyLKbA2WMKlc7QPV(hG@5Og_c9wZ}n3a_#FRlFpI+{GLzEIg*q3Z^^HhwNjmLcMo;fx9VNbQ}wA&O>{M& z#FUGKP;V3&^N>kZn?h@!93F@qem+}X3Sxq3W&K265E%;}&;Ha;Os!x(WI0!+)&yVk$#XZ=L^P&I)($Pc3d*_YMVCLp?46!qh zUw;dcIs&kL7vTlHaF?KPUkNAC^K)DH^M@lDg_JBEq7rft5XSbDn2Xkd3G|H4ptPnDlk>|M9-l%(Ydf0S zJ25-I1hdtKVplPW>A3toeGn-2HYf;j;UUOLONJ(k{fS`rx_kjXo*sNJK?n#8Mr=|F z64Ns9#jkx`xwylHPKoJ||4Cn$-Cl&?PgUSQ<-yOt{6YaJ@qZ!!<@(dtBoJEW2>AN{ zARJ{Y+{*q#H1&+5vaT8Vxmj=(nqaf!BR0Yp@hrJ)6qQxwNXXV8AXNvyR0~cAYgCkb zdTs&w`iGF0#St_!A61R*c;kz|gNB*M$Sfa5YH>G5%rrDKb)cBm)a)#ShK(oRP=VsM zMI@I_szn7ApC&7+w2?<-GCi^oM`MfGfe5`wS|*O=4;VT0?|R`puxqcbaX6i zW98wCSbOvmiaQ2TRM&{6)@C%o|NIuU1uY=A9sW7(@X2n&g@jsoWVFGHF!su*hfiu5 zf>K=wO4MSQgVA67hyMqE|HB{R8{hakzV?OB;qU(T?-UHzcenAi?|c<6yw3N-&-&Yc z_=ottAN&zJX$`suhB3K*11VP7I<|(0U-(5w8LX}--D)kfdJIQodcA692IVS1MgQ22QI2XNqiAeM<9y2Z^Fsg zdYp={!pSHH&PEw%uV2H=!7J$HfYUIwhcrhU+iD8HhzJeJ4b4ZK!fIcf6y4(a>;Bh>B;SFS38q{{f@$E;n^0#sG<@eDtIE71I z{#aUCKz)T%ZH3H^4O3esWj-(}#2@i7p$H7{qY4a1WkVOLI;U~YI|ll~TDBxTNz`P$zL013jy8xK*{HiY7eI#|tS zR(QOcgq4vnDJBBZ5n%}D%?XK3L4vjzsb)4{?{t+Lu(X=itGE*BY3T@!j7BGKxa5oT zO19t_NAJ^tIS5J8VrXI(;ZZS2OJk$W%7af(G@K1XDC}54YGF6Zdbg++U&fgPNqkUz z82=|LzcNo2%hx24s%)tXui)bf9E+;JiEtY(Md?sIv;hs@OG)| zE$FE)f`uI-I`A@_x-4YJM&-9arf0vBKxV}GXbt+;?$ZL_!s7k6P(HMY zXk8uKPd+YshoZBs4l6T*7;Udqr}>3?o`y9)4cUp&DkF4^?r}X4NgELM?qgU2LJGQWLazA zYMz8U0hp9q3};CbTH1P%oScNXm7QK?37~Xyb=?*!3dx{|4gnzsi7q10lsIM1YwGIL>UTu|<>@OLy;mDK#?`Sr7 zTH#Cy^@$3_|bm8Eq(#*Tj~!iaMbX_(yG!1GUk9+TS-uzder9K8D*w2f4wR7eSi2Arcx>={|W zox6AO;PDeI5J+PPlS@mO*}AC$eT&)_a4yu0Ysn?>%Be(PekDQ+$}zNlN1Zo3E$4g;jp5zT ze+AFqcpt9Xb}Za@f`hlejjNdrgi?61nawb|7=RdtHR%NBDNN%VjAHVO85myzQ0!08B?3!Icyi zfGDp^$dhCU`3bNavT*0tuKH|->H*s7+o&5_R=aa5x~E~UYD1RBf@K1!uEdGFlmz4? z#UUXg2zlv=Y7Q`iA|N=3HaIi}<#MKP^EfX0L?Jn&0E1LRYxz{7x4Nr`VLs==9SAvk;C8b={7RI^dkmD-U)TaZLske8Ez zy1H6QZ`$JALS)(-aV97WCq1JPlbVl)wm#Z`9HeLK;HqfGTc7(a>^=Vqww`)AnM-mePk_)M8Y zq7pnNtHE-m`jZ5!l1cbPh#3JXPX3)wLtoWP_${J+{(#mz2UmSU(9u$l)>1u;84*-` zmr$rnMP__3G^tTYjrNB&Jqm`b7^Fn`V6eLubBl|#yzd~10JPN(plxgm8O9oQ_)X{B zBU*HgQhLV%tZIvyyPQoz2#O*+>TAX^!cfleJszBgf!!xqd-1avzVR9+?|cIL@BI#P z>t<0u|4d~QJ{6R&I_8U?{wf~7{dw#>e2wLG+Jj#M>jrr7aPyNjJ%pfzE?syg!Vkx0{1{F z?)UBwU&MHE9b`=urBRH4RN^pq^mqiK=I3ZNr zfh7c39gYaRsLtIu@I)AT3H3if*UFn}{??tKydaAoA%v&gD+yncEZ~HpTT}^7#>oC{ z$?VO6ESSG1lJ_r05?d4#fEM1%9JCO8jpOSm>YT&kqt8HBJ&sfUxwuRP*w@*BwW&S~ zHMpQp4n-&ds7pHxgw9O}LvqkHE7H_I^fvbCF2(l5l zDqGRe(18~oJ-~E-8%it%$VrZ&mG*%yGYQdzk10DFF?2ot!9l2Q=|j`t8m{=oB0eb> z?X5kq=`E-&D@9`^ZERjT95TO5h}KnBAuS~Xg+=A4sBJ?3*c6&Nx=>bAgVxSY6zKIB z8687;X$1=Hg|JaIMuvqUA|wc5f&MD)Pl~|L-}5T2T{sJmD_0N@5Cm`9;E1?Hq-5p% z6o4Pk?aSQX&tNFZ@36oBpG^4qmR~pkc~RwXY5b$fQ9@6i|B%n+Sj@T2n<%bnhtpL? z=^ctnmj%t04#b9fBPPrj8s6ZFiW0=6WFat73!elnPEf&QQVnVgE8#3}Kx(=MG4VMV z9NWPC7rugcO&e0ook+2@!BRJbrr{;D%AVTtPE>a;!rm~C7;QI!Aqg?dXd9h4>StG5 zz*Jgzc0!d3i{)rAJC$sM`)EhVadkE@J5GpE#U#!jyoyXmJ=$llWA~-cAU@ZMxYTS6 z_jO>PfeJ7y0tq1(2)+=c$NHimJsc^~-h`nqM}B{*2yX(g3X4=*FMsOmNY<6YQr(Z* zz7<;GUd-Nj3*8IPaO6x1?XDSa1fN@w9qu6x$U?@c5GU0j;TK3t97H$<6(Fg&hrpXq zC97&2`qovXRZJqYb{l0v?Tcs_Syc%WDhF27YObW262QNHFp3#Qsm0kSW@Bbxj^ec$VuSYzU+qIM?H9vPGlCb08b2O@vplaek)PR$* z4eFjq*v<*U>wH`lQi^5~XBowD3F1}@GZN}j%KIeuOp;s_5r9^zJO>9YDnUv06(dP6 z2v^?Eld)Aemso@2VN}wg`RH7_hiMLuBiqk0bLU+c>m==3E<$6{urM`@HvVahp>9jgh%?WsU$etlj7ej5hS+&%!S(Spp> zRNjmL1p9fZ8xRp1fxv(Wcm~8HI@5{B95!bEbZCnj;Hs`gRbvyPVqy>$9YfjQhuw#- zASB(UwnQECPJpGV1uwnx4rbQ2&_A_^(#CFdjjd1tKE$Osc7|)YR4n;88Aj_ANaezg zb9h8%IjtD41fN^D1Oc;yv9leevXP9??!kI08w>iE@6+~8pm};1<2PPFSh^m8kx5j5 zO=v4K!I7V=4nHq3YpDD}kd+Xrc7GJG;hOUjkreHV&Q@B)$qB6Ae;H9!x!S58)DA2o zzo-Qr(>GDtxr~TxD&-J40>DII+X+60$`CC|@PxdlKmt6NHZj@ADX)h!^npo@P~29RPZ=puC{hi|+A?V~Gr z_lsYLv$77uQ?vNQ=e~&DTX!(Ld>#9*e+~5#d>%!GCJHb@GIh(;gXCwd$Emnx0*f#V zuOrO(x(rBxPNl@%C1z2wb_erkCCnvI1}xs!U{QbqK?k8nB}kR%9$l^!;gK+^XV%fF z82*kBEzU(2pk;O+y(_oSzxf;^*WaZDo>X&y(aHH3?(e|n{1E!{Jc?Q;)S1>zE$w)8?*Nni z&B#xSQvv@uDX}oqRwsn`LqiLk936#{qGH^6@G|PV=5f(8f`fcII@)+Ivh(?KDKKOw z!IYB(r#4+#X{%0;@bG9jOKVWo(2mN+POR_U#Kw&qe60*Cw8D!^D{wemsI073+e8C= zeGug51AlK%n6&vQc39!(bqzsOf%4o$)hKg-{(&KgPE1i2`0L;K)x!nOj}|`!d~)d7 z;d4=iANBqJg$F`0+W1|+8I)S0mfl-ZtF zuMvVF$V^FrzfUl(UI~IAvtec-I58KwM!lM+N=-{dL`(#1#f5nHD__IH z!4uSvETL!V7QZhOvnvaD_w%2_!P6H|*VTvD-v0ugf9luaomP#I{3aw=yHQZTh@#=U z2s4kcBe4U?fk@GkDvPQ@lwqigS3-~$Or16tPyo+Z6Gk_mp?m%o`quAb`p#Pl*hs^@%`gLNI!|YO!pgs%P(%i-2M~HTz`nE-Fp~bxq;D*yJ#BU zpuO)wrzV{qpc)J;7`oT(FMLv#p;l5>9hv9&mYk=7Du zQ-Tpf0M-`kk(C&NxR5J|@;!rmzHZ7R#I#wMnVshSd<E-O11boD0oBKuR9QHx5wXtVVpkl@@IZPe1i* zn7#Wc3~kCGMW4d8pcrU4lD+!&yQpgEKr$u#i!Z-|-pMVT4K<)`<{moOi6t=l!Ds&j z=@m-~7_wUEMnxh=VIHNjIvz%_gch?iQDspHx(90D9jin0*g9(aXQ%{kV&>+H2uar9 z!nGh&SCpgNnuBb1lK6066k9Y%j}KSLP$e+hm>my&b}Z8Q^^VqREN|^#;l?urr5K?p z??y4LsJ&?dr5#jOWrMVtTkubE;A*%QL8(q$j?m*uv=!&6=q^$19T(*%pqAJ`Ir@>R z&rKPAY=gg*3egm@`n7jEhR-b+m$wlKz(H)l^D1@IIRiIl;6Hdgn z5OPffoMh>i-71Gc+bVCPOiQSNss`?arF>lu!jb_@Am}DaQFh7%$kYJ`2tHPU!{8z0Sap zm4NivFqQ2)TBXDfr7DYs)lh)h*%_?t-sXL4L)+vI#yChejBKlY*@1C62%$=Q>4hg4 z>usW9%ta!tt|UMxvFVUP5Snr_*e>GH)ZB>2FTRO}-Z@<0pc)n(kM5oU7zw~^0?&|} z2!}2M)lQvKkcPZ$#3v-6i0ZDky&Ha!@o-huqHlDR*1L}b&j8jpx7A_wWo6~4sjgJ1 zul(81e7&zJ@CCBSo?w{=^uBUY?E;ZGK(WB00OM2Bf4T}R*7xHgDp2)r0#MYSlz+;D zUqtzZ15ky)$o%L>kL7g%pd>^U3oHQCIV*6{Cj!I$ z*@Y`%I$R9N!wIisXv=!2Bxa~?@1wkL3#o+z(ABKc0$XY02^>PiP0lZlAQWQ=6sj@z z*gBj|l!Kn^eE<147oLutrvkcH@bHayvG?RT9=#=J&%TW3?|vEkkKV$}#%+u(?O=B6 z4kp%aQNbNxXyqol=Opjp9rQ13V`}>rx~A7Kz4ri36I%q_t0)^jpw%v?YLmaufrAP# zIKLV@uYD7a?sXgw%0v?fpBjR5hTzk2-ufIF?P%>NxKKT&rz zeE;=Sht)V9SBsPJa=r`IqAYq4hG&x6_!&F-a}78y-xFR*HC#@MOY2KTd@9U^6TEMd zIp=7gB#~eVlti*QbQCG59a+Zk&TUNHd_kqq&vSM1URV(xos7P=2CPo^VW7DXX%QX> zzI+@NHZ7qSfha#ugm_#+Zek2vgkNrY3dTmqFuAyebW0@~N7vCbx`Ud*O*q@;;Te{S z;LsRsZ?0jYzZFil_c*$O%;Y#2Xn~WWLZC@Yf|fAr=;^@h+74U|{W#|tge;8?^NTAg z+{I-#!l;q6rejfF$oG;&%j_^CF)0Dg$_g~~4j?Qs4Ti!ZXpANpsrGU-1*jkpO%@vx z2ue*}4x%E%R1U(BU_S&BdSZRU1N{!?0X?oD(9ciJ0m>psY;qb)ssf+{LVpZCxvIWR z1^96o%)k0Mz@Gt-|B;D5dCJQA7=ZtS&;RoW1Yk)GVzb%l?ZvQIEb25dt3?l+*#v_| zkD{V-7|c#&8;TK|SA;Wx88~t-3P-Lb;FxC;ZD1^pdhqI-rt-QS@nZ4h_jsi8Yy6(8 zQD_^S#S8C!1q(Nyqqt=VZ+`LHc z=4XmYO+{2nG8<4Lq7!0}n3{x4Hgc`mtU?tYzVTTsKX?zPg0m5tSAoXy8-(3}I(+@e zl^C4xO@O<1G~w8(PK}eevhwa(6qI(MxOIWwlY%2xGvMghfuC4q3GnvJ=heu%GD4EL zo{S|}A{?}RW=!nAi{Z^zu=(Wkw7swL`b7+Fzk$6Me}zDM2P^kJtG>Se=t~&eehW)? zKZj9Xm+yZblQ-VM!tGB{MZSsg-PbX3{S6HB@zm|lp=F+C zk<dZHv%!2V7!|#mKJ7VHtGlkA2olL zo|cK|$QVRLL?a_TQzh*vE-%CK&K7Pwe-kmr8rI7z=w5jNm4ka!>Ly$WNJ2l6f=Q<>!0`AO4jw&+sk|AduKFUIB4K=bP8~|sTwhJG zkdK1&SQKhA)J~F8y9IHv(XbRcQPRKgkMX)Z`*RC+DYefN?45NJz`TH-7ckKH3R#*stY!IRE!E z1^7z~EOjGAv@$D1{z>Hs0DnXP$_nsb5rFmmf zPs~6p^MjDC`Y=us8O@TH6mNt#WXBsmcdfGja$1S@nEBRK~haTI3S=rM2U1 zYzJ%KQ$NDAJ%};%s}=GT+Xx@`A;mGy-_wUw$0Xv6 zL%fdj^=UTwQ@%&mQ2jzwtfRXBEsGoHR8vh_|%kh)*WY`6nPeHW^Q!&^fHnQU$id zP8(ck(x9%g5OzABsuC9*HY-NQ$MNQ;K8NPP8C(qvr${Km{K^JO$}7>^*@n6j8=XWt zY8*NhSl?V#f$Yo-bkgqjk4?fqDh|%_Dpc}4U-r0$nua>`4fH{;*DBz}M@JwcBmg0@ z*ccK>0BfPor$zTWRDt^3EMyX#G6(1v5RAn1EMOOuzqj}^&@Mj=v$;h+Ct0JE?Q>~P&>X)HPOe8)`UjB);zt<*Y{94v`FZ! zqHbh?-@l61nOzL+yo7-KI(C#|c18!zCY9k_B0FD{6IV0pc`a6uI8ETW5rh(mD=Vu< zRKPKdOsZ1_x`o-{1JcdFClRD#D?G6?RWmD_MM4N|QQ zqHSy*!%LeOUR*~__aG+M_weNXuVLoaYcSLdqLr3BG}VBawSA1ttfPdh>19IA%Z3B@Op{L`W&z4qxqbVFS4BH^K;>cUq8?5SzgcZ^|J{|WgZVO z5nyJu7g^1*iOr;HmXIO|UOo{~h$v$>%ElhS)_+&k-4U6ql)Q?8l9`2yEwG%xlrR^u zv;>^Y>q)SAES0Rv_*}`~#S&af_)+aq=^ZEdPDF5Eq8h(Mt6e^LfU=<*$f+3TK(dXJ z?hRzx+mVo8g65uSR8jf24=2q7I$Xgky>Cya=uly^<<45 zk?C5r@ZRq{eglzddB`(ZF|)LSuHIf$P-$B98rY0PREGbR4@>F?5RqcRS%Tv9S$~{3SuklR4d$^iz}@2I_-^Flg;r!A zH{bnLT%|%f;%}h3I9$~gs2vHD)j?imk1adc33k*g31#rjXu#E^T3m{+hG$w6mCIp} z?MZ^tJ)Cxz5Ijbh91GH_mEjXIzvM~9aW)P|PDd)ce%d=7eu)+;xiWQpW^vmHT1My5 zIy!?Pf>2KM-+c5M_Fw%1s`?htMR><%>9DbP1B=V+=>_$>BsKgIO=LtLQktQ^?H;N~OD9K4N<=U;`PagD$;5*$T16;E|b^%|6A zN6pw8`nT`U{>r}LM;P0CM63G*L!0+8ymb#Fe0^~J7J8R&u)Ysy^>48rAEJHnDFSnv z34KYTU}b&EDzm_h^%q9_OBJT(^a#6iwBB*9X$0s82stV?vAJO-d@m)eYf*P~EL948 zALm|_xIf8GBL~wS|F(Rb;lA;4CUeSw$U&W)`rpe+wD5 z5|x>|Wo#AQQ`@L)UqFVb6K1nAfUqmWRXT>C6dQt4ZSYT_`p+#!WI+YO zbDZ!^)FQ{#i20k(2}CRHY$4Wm_R!JYg{8%G;V70AaSL4ok{xC(zCZ>qsy1n}y4 z^$G%f59a_y0j6f>AtO(NU-`9PKQwk9f$wMb_izqS#LvHa04fPA@jwDUnHQk?`-h)= z!15tJ{D%*f0+dA%eMt*WdBx%AX+NAkAApP3!f@(>KaQQch9f5~h;$>` zsq753Jt*uLL&d-hYDZ>KH8_W|o_Uz+`jJ=CipGgeG_h1sE!GUL!qveMucQsGwpoH_ znVsWJcx1LwrASs6DvxM(q9_*?pABw-Ickx`C&{Fe3KX}`V)FXSR8Y?_vimA#?|d4X z+C_FkHsq)hc0xN&5`w2AL=BqR*$J2cszASFgrwUMm|(;i-&CCT&A?HQR2=uqg)93Sarb-{4E% z|Ihg95B{33$>aZmFaFWr;uF93w}^L6alj}f$jS++!(A8(U?Jr=6<4oTbX7KOs|lO+62*jEL4gJ)vjKUzxv&_` ztUEn4`Pu3)pz`8k42?};a%~66hC<|*wV-)o1@%L7D&c5$(EyHI%f!)Zc{t`l1${-s z#~LcNZDUBbl@ol!=v|@>p4dnyG%+fh4_s6gyJ{?MY-I8>fjX(hhs`FgmAKk!dZ%(#@xM z^DDoBH^1>)_~ftuF~0QO{|EgWuc^j;JcL${YSEp_Q4$fzj)G%hR71YWh@gcT+Pnut zc^A^m4ajwMb40IU=g7w~?|j1W@K{NA?-aDrviC0BfU&wq#fp`-j$vfsI-+9|vAa5t z(LQzps|5zy7N^;S`pRn5SJlHw@agqN6c!f2Zg-)!p&ecQ6BwM^#nq@hR1U6ErQJeq zWe;-rK8pI*Fm>k>@JMnJ(s``QNe)2&fUkY;FHkqKhrG%`hUD&WcETB^4O^<2K@E?Wu-F?EKA z}HYuzM=A1uElDePga2icJec7H8@Oma7X|&RbsFNKFi}uTHtD&V*UH3 z6k~AX1#~XnhOurEGyCr&EQP=GbO0QMCAhP@gvsGvIPDJP;Uhet8CxPdHN8MM_MRJ_;GJh==_WiLwmx8WY3!wE@D>n)k2IRMJGL|;9v ztrP=N?BggOe#|z;&*R1RAg2uaI1cA7{rH})8F9qJL}+I7aR!cDjKxWx1Z+Qh7n3^= z&^*3D1^ODcAHR*($$50mEVE7Y;MrTBMoaG)X4h}v=HnOPs%}ASY5`)B@)64t9G-xn z@EACX%kb=lm$85E5&Ea*v32V{R<`$HFDk>$TlX+bWhemjkpSr6U_?hnDF8-=N5JLa zpi1C*d3aI@`oLx~!lXCA)6-jp!6ap5vt<2L0e<}Na25DxbAUf9|2!LhUga0801qMf z4+NbGh88O<6~rPZN&S%Jzy0VRQPJFu*z^K5&zGxrpuki_Yv({ndo@LU;pPh%*?hpx z^^gkiW$eBB9aIe8C**86!A>i&cc;Q6F@dOoWH#(%s@Ygnw+*6qd;wZ}35ps9;A)wp z{cSot!`D|wg(yc@=Bho--SY<+<=-&Z4si4zN7K*>=64?Ju$uKKp_MDN+tJ-i^%MMiCqm8eO|@fm=Q%Ap z2b~&Oy?ut*oD!Vpy|>z(*x#7J#9%i{orUUm_r#SeXpxr-CW$Q)->_(gG9>f9AH=n?K zj@Q2O0~Az_A~dstKq;u2SRCkGcC2~nY)f64(yi7 zRxIt@!S?-^=nn2+_Qqp%0Q#MmKMfNdj+H{7k}A}9^Y8r9((Nj!J&cNj=LP}CH^0IRf9TBOrLx<7=Cnv-q zQsx8$0uk)*rxLTqL`K2G!yCT-!AQx-MKU4yo!|T|{Fr_EpDMtQ;rH<_5GnsV4}RX| z7Y{(G1^!b>P+3Vo{NWGrKdA=)=Z`;BYa?=MS4DjjVv^I5l3k!8*d?c*qqG`{1VA#a zU1Wv^^&I({hNsarzlO2h+vwZ4f!y*&v{0!{A3Va;t%p=*x6wX(L)pl#xf@8(m$3nw zkz_1Gx~&>1<|-ty(PcVXkzs2^s<{>M1@%;EBXHGC;~EubM`IJ7+`fS)2U~di{ZG@H zK1Nyh97=nZ;p$pLcKI}XGh1*hz=czxMJ((HK}IB*yO8VbMRZm%G}apQ^o=7UrvRDx z8e|$vV5%OYMW4q}KO>I%8{jTUJA?AonIdh|H~4<9Bfqpm*{tS~HFQsHLc`C#JUfAb z9xC5L8#FnYa9E5eb-4&X7YeBgZRP@YTpR3EhOMnFm|a}L_`;4l5wC7=5k2!;SiSce zuD|>R4i?K)9T|jQDsl>4__wsafBxTqz*HkHge2qbuYL#L{dfNkU;n-D;p^Z1KFgos z8{hjk`1E)F0>1H1W$8cho$unSfAsHg_fy{`tjttz5-%wLlpQAoR|KIYnR7(p(H1N4 zQT-k6$0yW62)|F%q(G6tlizbPwi52qw8RAG zkubh4v4Toj^7T+7RlOC197Os!2-4HF+I0}o!d{5r7wiDrX2%wdl*~2hvhr(qHgpi6{)Fdai9L44Ua z9Y;?1;fT8z{35atlVQWri-GWq%Y?qP36-6b(9j{tIl#|ec^g~%ch&sit8c%j5~3FJ z{&#nDp^k1M(AN*4fk6ZxAsFbVvN2_*rXeaU6h0o8;pgo`3mk}mpl~FmW+N>t7vG@; z765*1eGdT$x;yFj0zN7K$`znWhsE-r|LU*s;`8Tt^xz@x-@B)-j~+h4%P+r*x88XV zWtBBZ&(1}zMhAn%jzUUxquGJ%Tpe;WM(B)o6qi<^qPhV!&F!dSsch>)L*Fo3N2aJ& z8VQkgG_WBBWjGL=rbitC)Yv-=tE(6#we_fKX+wQ`HyYZy(cImSn)WVKwDNZhjAQlg zD|q)CKfsl+Or+{cFubsjwVN-gmAtmudl=Y!1-+ZEVd?2N;g{2{ER7t&cs$HW`)kFC z5IuTUpRzGDW?=m}XvpP#6EmMOVTdNrAr3Egu!>G+yaawYCyo2>*)E2;OpenQzgtRJc zZEYAB8AbmjI|zTT>`;-DXrN-EqTaf77k|gW=imOfAEKSGJ?A(L^YG9H>!{x|QDeryrdpJjEPVU@S&;KjS+Kb<$dUMj|R^oJgJxP73J!9XQG7?o@}O^4!8o2|fv-sZcR~ za!8V7;E{Mt0jYbG1apfG7T8wsxdb}v5s+cW$j(#ruib;TVgS>7Zz0WCr{)0dg~ixg zokD*{6AH}+0+0$&mj{z3PXSP$n+*d2Smtt|ytD)Z!)z0KcaUjt!dBIeo|$b9giq)M zjbiJbvSgw6gDG@yDXxdvRf(R_DQxcF!Q$2)oE!+2 zw|6iyF$t5|qK@1wv{~Wf>3Mh#FaemAmaGO=0bq1^7-1Nx7D@sGL*XA7hS-EO_SHOf zEq&)kd&T*TU34*h>5zU>Q7#i$>tE3Q)A_pPrLTybY>YJ)jQCEtV{&w7a_7Ho|Ud0!F z_unDAxC7?KNmLH*BGu7{Yw<25S$kmb*hWt60vZ?Jz_s*Nb^zKPc3{a>cPzw+Q{j5p z+vib8^_ExIfTHRa7))klWTd0Lr2$SV)yPa2JgK6N_zD2c1Ry&L)x!CZOmxj$N7vLg z`e=pQCvPAyL5EY~i4iE)sH`}1g&xesp#z|W&0PODW#_+go zwx5H$R|2a0=4sz6;k)1e6a2@&{d@eI|MLIhH~;*vP&c%R zQ=SoO1O0dZ^w05MfBZxICBOb3e)toV_l)COR3^Uuy+6lavtfVlul^?z979kCG!bIQ zqhj`1_zd!{m}=bB5Pb5yCkiVXzlFkR8`#4;uq*3msGc76lX ztD9))?V|{2L(kv2!L0OTD>MvXY(aidie(U8W`2d3z z07U_Q``3R%B{x?6oYGIOD#lms0Qoo(!Y>sdYvCX9tKa%Ik`oe<6rZ3<3Lhu)8XORy zk}c+BW+Epmi#H<;iE(lK-UOs35^~XTNQjC>d_)xDI2y%@0 z9Gi^b1i~aR8E#%lIO!DyTX`*9W#!n}TtR8E15SsD_NEw(bp&92B}&Q)(LXVScfR;J zDx?Q^`#XP%;=Xm%Ox{81$SpQ-iTTrTl(&C$Zb%_6rPL|KA!#ZIcGea#(%(&+>wuvk4;EvAYM@S=gKAKA%V-HihXP=0Yb(a4rqMUG z05%YVnn>Rp`oi9>DY z5dQM7{|0~g|NanP{=I*LvjI^kZtcXs|DPY?KeBP(e)}7=^0_!4!+{`7l9d+XVtf_O z#uO6-Cb)A@IO4BWzhI$H=p9W zrnaA6CHMZ9e;wB!zJ$F;FX81+eF2+ypAwRv#mLew?!EE}+<)agtnA;z zi=X-$w3VGOl(!=x&!Mt(H+GM(4B@4BK7l7Mzm6H&*=&tTWs0t7Xv4_t0@dRzZrQ`y{tu7LrV?Kb4(WFsphjs4IcL4;s{w+E8rqL7}HfbhUT zl_4fADPGM1Uc2TEZ{Hv!BxfR-;^WsSYCfI={NDj6E5L_yf&V8He%|F54?uRX-}u#E zLoP=ViC2=VC_s6f93PL2IR`)il9XT8fduE>xEmqQYfGM{_OOSQ_gp zP+V-I9d4x6y@B!V+xYSi{s!@mPQ=)H5bGMEs$m0XhdnBR&NA6ASzrQW(*L9Fagr!O z=76XKSWZ$l&TMx;i z^1Ff6TQB17tDnXF*S~~ZYaK56#v_iS?bgaX2D;k`y+Q&o7gm!1(5b>ToHm&Q)S}34 zRko$CuMgwXGZ>s*M~bC}s*cKnoonaW+j#umSD~j8Jnfr=^#`xwv%m3Mc>h;^6`%R` zuj3Qn`VD;J5C08b{oHTjoPQcZ5_9o?{ng*77)@DOKkgZTH^2M^Wqto6Z>g?k5ND}+ zo8}&%bZ8Hj)>T;Awy1#2@XM-1!z^DPq~+?}fwS*A&O}(@9;ic>a{vv)*HIz42D_%< ztn0zx)G|Kt#c$)iFa0X^pT3LF{raE5RzHb=lu|@%IuNGmMPS|l>%5-85eQQKh0-qb z`Edg9L?o?sh!%0iN=)B)f#7=$x8L|0CTW4aWAs#jQMACNc=^#SY%I>8+~q_rZJq!x zpPgSzCt@zhR~A?RSW#Ali5aS^TaQp!-KwSqRt}zFVgC{CzWpuKj6eJ-0FOl!v7N9D zuuZs!m8n4Rlfilf(8bF4<31ywLY9Fw(c?M@#_m;9wD#K5pb(jO&%0BuzKs61| z(JnuOrJ@Z@l2@^9kWOG8H(q`ZR<<3y%_U|YKDDeB(27kN&B1O9XFBKq* zD8S!iWog*ZWW`CY+Ppkf1bn*uJT;eP;mB;J6>*sK>Kp=>)dV|7W~arhI=YLU+-0-D zVX>m9un?7HWoT)vM^!}$5)u;;MA-O7q{BPTgfspr(3iBKq?VSJN=c&Qt1D>}*yyt| zl3*|!Xj3a`D`*>9y3x#0dFt-_I7$U~Jd7$Ox)7%mXyqd9aHF!51CowKQtio!a4c?7 zrMwb^Qo^WuWE)nX1*Ze37`>Bm>T;lp&r3;3Lwy4+acvg@QwwoQ(l4oO&XT=Z6ktBi z2W4Y+?Fvk-{hx!OY68c6a%t<^k?d$g3W1+u z@1foAL3Zg7G!;YeNibn->w%i<`{Td*5dxE`JZZoFh7JAyM<71@C4_S!zG)o~1OzKr4Rx6!@%30hxCh9CJhBq{}{ zVdpPko0K^~eQpLVu$6A15Pd@nhW&1Enng>x> z*M+9R8R&}WTG(bwoBQBu>cZ&SE{0dOuzceV?eYTV*S9e`J%_&0aV+obsx{+#Ge4)k{$?4uZ}_&=s*$m%HpJW`~xLk0J-v z4IdYZ%CS4(DlAf&Fv^Qd(AnCI?v7^kbakMRP%N$QhJTWk0L);=wIMmzp$@gq$jU)! zsS6gWB>_lLMHzajlxq4$kW*5RmbraYjUOPSpaDk-DcL7`I-YQgawq^Elat|Swd6R= zBM}_=qh$-7%xh5rNaL4GBZQzN&phLojFXrAkeZf`JdFlT?XAeRlps8>6c?gstNo1x zppl)0orC~9M=LnE{1B70NyV*mEK3MWAym)P`X}b#V0RsJlfx)2vMK=DEn;~K2|TgD zI_L}JHJzFV93LOW(%LG<7Pko2G_;MZU}5JjJJ%{Z)2nc{ZQ@vfNp;{O91stRFnattT&H=guAM-MkKq zRg0T&O0{K&z=HD#oS|&JOSA&ZHu(G-Vj}A7`&$i-XTgypJQou9h5q^33$_fh*D@&Y8 z0gg;esX4%0YX#CxRhZpL-w2F-0f9flRVYOFNLGQ^TnOC6GIimYC{ZLZf7m zbMqlss|QtHM@b=8);@%ek!cLgETMmF7M;U07+Kh+>YKp8>8{A?=0Yf2Hy-e8%p z_w@8t0F=KYiy$8>Kv944PxW`D27eX;^Gg7-hywiH?|oO{r14$3kYp%|9C_eG_ryG-Z5HIGp9>=pGzE-|!&DSJrX;rMEG*`vAH+HZ+dxqX(aW zt#_Ap*T~LRP6fyjJ<>t=S=IG;ObL~si^`9dH(G3P5mZ`ycEHo24x9_M;hZQszcie^ z6httYkeNwqWiCXfu^d^h9(W~}6E*@tc8(wmEwDy)Qc1-%x^a)Ta0dBB?MTs8ATHC1 zxWr7X)3%8Pc36!BU=Hg@ixOuc>&T*3g|+z^gr5mE)<;)YC#L5YFg&+Gu%@EEU-ldC zqJ`iYTzL#@(=t1#O<8#<$7tP;5!^?EJZKWmc+G_Gf~5UmB-jYn(z> zQ6HkUEl4r9Kwr^ARY~Rc^mX*kZee2kf!bAa_w`R;>;8*q?3qyc1RuQpHMP2(U)+q% zd#~X33vXg}Yacfry?|Fg@mcKNdx+=nd=jsJ?rSQO_nV*p7J)sFB3i%h`P+EB_lO#}ht}}@bMTR*s{~+XQ5*VJ?h(q*Rm!Qp)fZU@nK~G)7s6$pucN&|3E|-9jA)k@UhYxO(?k zPgJzwcASudmEvS|x&o)7YSgOsNrLcfR29y#oQ*2Nh1fz|inSsjqXfNM??Kmb7nyZ? zEZ31)vjbi80kWz#plR5Jp=k|iu5M(OcEi>&g??J(@s%Ac?cKt`(-(2?#W%2d@Q8}= z0q^Z3hNh$byk`iBX|M_0KguDzn6F5zs2NLY(O`(#7^psRJ2j~|NssNapne!0<4=t|z zJA|L~ds+QGw7|avAd75)`=dYn{viNAQh)+Lc`l0~htG5PT;>L|2t_KVtW0H(^Ri@a zFcSs&{5l({PE)|w`Fk>Goq1z4nF%oE#&UFD#nMzS^fo7=@~8+1K(Vt&yp!M;p9fQA z1NtVXQPtcEYjH6a_wV80&Cj8K^8uoawaBfRKu*mpVw?j?@tuk<#Yr~qqY4-%*^-&ViBOV$YxsrvWms4>3QViTqc*CM|AS^Tvo<3m+rCl`F%_1zn zg#ffD8!QJHoeV0#rLa77%4I6uyrEa+KB$ST};qs znaUff*oH8+v9By!-}Dj+%j;3rGN7_bo2$E^p%oisClnQ8EU7{F_&gT&?$D+$p?hW> zL#qd99$v)o;&qjTwPkn#^+Rhoc>PF;<7*_RD03KRkJ#tDrF}nQ} z^9Qd$S2c{@l^5U{eYl$La2DhKjTQ8@Hz;S3m!7PECt)xJY){>qEim*DgDR6z721bsZN zz{itt^bP!}0u&4UTNE|q-2c+wKL+68Hn@*hf`9h)UqtzZ0#GGDpaT5!KmHTwXf<-v zGuYs0e+7WD2oe{s;*A81xv~;WMVOtQ{?n45olOXeVx(Qp%_a2mk)J_Os>$nA7;=-~ zG^XLDM>nv$J_ko>4K1)4r-E{5ku*5!n}Dq18Vs*)VrFdv#^O>0#3f*e7Nc+NHVn1H zRBu#aF$5eNv}}iSj~39;=2GDuiP?NBFSJ za$F3`!qtFO1cegp1bkFv9Br@}7kuKVfCdqk+f3UjhZo5rh()aeUk=Yzi4P{WZqt%a zqo{R+3TOcXGuvujXKQ5veVuJe9cyXXEL6f`|K;oyla5N*tS21pyqeM8-l^uVx<(dp zAvg>511lI>K0xQ}4GeESg{^fN=fWj+k)MkIKQ3o>NPa^BA77WaMmg`~2o>RRN&6pU zgl}dg>c;QjxNk1bQfZwE(BQOx4o-Qcz&E;p^{Js!qH4@9gJ(n@{9<+Riz$FdNG5!u z3gDk;ru|K!8cT*xOfJGx_5A)K_{QWRB*g^p*aCRR8*wQ@hjYRCxDu)(OjqD+Swf<@ z2b!uyBo)o6xj%{jbBiSS2p6}IDg{8b2o+pF1=yle^iS?Sg`;^I!yB*QT4X-lE(KHR zSg^S;g6@`DHMcAPltqt2>#K!Xqd`Gtnwo;CC@VuBZRq0GEo2xe-Ka3oBJBmBE=5hlJLKK9R}>&R8pAQwWlxD>9#l^84A2kSDB^^shH{)2DB zzwiL3GbeB=eEvTD(}@)QT3{2r?2Uq*UyH_F-u5S^vP;*C4l zd;Bu?pS^*>#eEnnd*KtEg`TNp)Kc-;*ajpIprp5|t8YO}avs|Hr{EcyfIfatQ{O0B z2F6g{*oMaT9u!Ct4TDLA!3Y4u{QVFe8jL{iYb+k>SWKA%^tyTpzFyu42nbP&ATkFi z7WlWn`}-=>-T&I>50&397ePKM9|Q0&2te7$uK-9eNYN00nUvNAVnO&dQ8Y$cTdUEe zijDGI7Ch{{+IXW1d374i>db>ev4M6S>Pp$^>+IOyoWq^#n^;)ig9k_blY!YBfwgc8 zNJK!E29BmylsC1&T2+In?0nj}ZYqX01f)9=o>z;~ft&EjCY%Dz1Rgs+0eCb*&W@l` zqCz?zQ_R=o5FG&^?V^NwMDTlq@~G;n(6x9UYxmzn+vo;W<_IclTL{1mBqk=Kt)ma; zy<(79(1^hFS_MFNNf|}UsQ?&}i_V!HOl{vrRnIs(KYzYs482q9(C93n^LAVFGo+FN7*L#6|T&WfNqEZ+11xhHm1BPcGd2@^C)P$PTW@ zIlpX{OdP)&4?7ifzOxs{E+^xRkF3H=$--%$EFAYr#|htbob*rQ<9I?aA7$+`IOUs) z$eapT>!x9>okiu~E%>ES<(*5X<=#Y`zK_tQ`t}pG%=Z~q&G#l@Ftr3wE#Y?vz@xGN z6{1C6IpM!@N1blhIJS$C%~x?HOb*4@&;nQD_Ra!EdRvtO%+E-H-Jsz$ogkD9%* z*(kExQN}^Cr+*Zyd-srQtwb&XII{i_O{07K8$;+=ea`ohhf@g_l#E?RR?R39oNaJ) z%p#jMys&Wug$;u!YLWw{2%Nqhgyz@ba)JxZ8()B*V;|?T#&9vK7gaMaql=(UE$YR_ zOJBn1&Wp_fWNhWf4nw*NNRD{EjatweomC$xGqve^$4<6{vT7=Q>_ z3HI|*3y@hUiG-l1$_yK7Qx-zo!)7$00C> zu-;NvfuZhZ^t9H%sMnyJKU3c|0k1d-FUi5_Fe;UxM4S%}LzbDghk$TaS3&P8L^=Ty zp|!(1#fW5kJH~FjkF=s0T0hzqnHQ5FS6SfT^$abRSlwe(e(q6{=T6{Z!SP7iAddEa zS$sd^`boIli(IY@`Lw$NA7K zw6Z~ut?#3{cM>J7qXg*+n)+vuoR*EHnF*x;iwh+VFrN)Fn~$9=5(Z;alhmRB1%Lws zL$tsvXzrcD#gJ@T$Q2B)-Qn-wfu(UmS-ASC$7-(cC_ks<<&!uzf#Gpk+>ub9ASzv| zz~f=Ezg3Um>?%|bUdJgaoHM>@u#|VHT?bjZLSz;=kdkdiMO`K2UAmJLpAg|nipq!`U@Js4luLZ+bFy^$7v<>q5dZ|q}if#1vaxbx^eSZl{| zjY_a{>+=XI+{2ZeUPMscw$I&zwSsok*@EuHTX^=_-@(w%t5|#WcaU6j1DE3p(bziy zowE!*;}clizJa-o8<^jDNM(NqndT}~whg1ExkJs7$5H*s9Os2g*N~E9MrC6cs+u}f zKEV2pPS{GyVPjo1wecS6OvuT~L2P6M!U#YKd-1w_i35Zc*{Mm&1_!aoJaYlv+vUqt zgFb<3E1WF4hys+IAOgUj6;XYM%1;3J%Q!$5QGtK{Cx50osMucFdL;0Z$!BAM4%Ouq z3Vv3qJ5hXvRvSBXp?a;5pt9Ki1wKy53#g$kSf-;H_LPhBjrGZyi zI!f5Nvvn@SXP6O}TZYQM>j)(PkNQyo2GbVFf#C$;IRda};Ra@Q@1m-ELS=&K7+*sJ zAr>8%jN8|@)J~A9(oz^S`Km#>s8lQls$tq*SqUz7$cnHDL$tp$3(FXt-^E2*VA%>c zzI7LM1fip42DM`c7~FY>>dy8N0BMC~WjmCLRKj}*!lS`iQ3Zpd~?qobDDT0q87Y za@riNFzv9Kdz0N5A$nw&bfACj0m^$9QPI0b)%FUmQUzZPN}pW}l*5E% z4p5t&soJ7sJr+wWbAYAAF0^&_V`lX_GPEVoI9f2Ycn=*@2L$YGw9G$;B$7QFWkz1r z2y}HrFxN|d$1xSovb1xP_0NHZwp3#&!P?DdC~la52OUH2_U94m+Qqe;cBHs^P{^P2 z35Z5;TrOhrUFf8fXqbD1+2_BBl)78EmQaKiwgYQPC59#^u}B5j*fD^?nJtXc?nk7V z5tVL)jdgA|>Q#FCa+d>FJ^T=xrlU3PMSI^6_U}Ew#KHmw#wRf_Hi7oeUKov5IIMOg z#>OC+$}h;r8~&aihzSc-nV>`bJZXWi(H`?_{sC$g*n=ui6kt|f0e<&;f1niL&td?j z{I3@HUp)Y&NG`yC^XGq|I;c)Io>TQ%^agh30(I6vNs$X$cI>2tc(n^eHe$y_L?A9I z645d`@rFpAvY3cS#72bi1_dELG8DcCNMt-N2S($_;S z;A&_X)rS^2*#$7OlN#+*C>95zjZXNa8Ie)kg~@|=ky1DS@8l9%<_bg`S`cq+L4>9e zafS{=Y1`E<2RGU36lJF^CLqI1d~T+a)3Kvw6PRf@axIy#OvTZw32dBB+U-*KBv|2} zR*od=FfPZI6DoF`2(i+(nN;4u%Tak$D_fY@JU|T_dr6Dz^_)OM_atHnz>OtZ+V*A+ z2sRjG`<5<`R#>YPwXFQ=HQB6N)+rT0b8{2=hKATd)^O4%5ek<@rU_hRFRL8+sVuN;^CK7u{A2zF2+XWN-S9r^l7q@s!bui9%4^_o zNGf;-98{ySmC@9UUG)XYUBs z_8ww%`7VxJjEAFXO{LzKgX$%5!cjTdP10mVR1$oWSfK`P(XuC407w-Wq(g?Q6*a?a zFw=e(woGAY8BK+0PxTPi^@CP4IJJPSGlkqp)=f%lF?#=lor?P2a=vqc0;Qzl|M{ zz$5hBr~;2g(8lulahXpGphEP`B`~Dqz|A`g$F8Ko-G`3@@(4Wxi$i4)k@>&lL6SaR z4>!L|T#nAe;OZ^RUB8dYu5pyNjiac(4?UyHNXy8<{exW$bhn|j$VRK53%gaocNjJ# z3n2M9sjwI|YR_gzM;qpr7BRKDi_ml%+Qv6AzJ3q3+J2a;1%k^M-~9vuO!x&m2s^4j zIY?X}sB-a%1*XEKIy}kmIZg{4ltY^}um^Wv4k#WmRDIP{eHB#dg|LVMrJ|DDaz;YX zXtHvUDTLWIru#e&ZB@kNT03{xs;ov@YAQ0*Qq`d?x!G9=4GTv^ zbR42%6X5ORkF)14;>;;RkLB!{b2xW~;5%~$XHU4{tou=xBe-ztDBr z0;etpz=t65O_m9B!pA=gC#V433BW7SREatRVzP4(o6AD$6P}-sSgVtbP_mO~;F03Q zY1-N5shcW~U|IJJ)*iftzLf_U*?I-9|H@w?);5eI0R|kS3UmvXt#Kx*6RH4pzN{Rt zn6JuFKgk9yAvh9P%&Wjroh3qR8BCiQ!Xgv*p;na);Zj5vy5{yUzIg|w9b+h_1$H(L zpk-(QNoiTQv9*Hs#u^k_4A9Z06g!0ho_7Ua@eNR?$+H6KFQrBsCX-QCm%wSX~9H*-98XVU=kMn<&7-LnTP1SSZh} zR<&Sbvl5&VyGZM9q#DBAFAm<<-WqpeR>{-5z;f;G}nb?M@W&rKuTS(Cq5z0;+Y_DK^pc`dWqOuc2w!&$1 zvY;1NLI;wcnX0xJ$~hYYV^f&jyoF3l1+ra@sOq0bamNG!yNmwKw|SrCzMFB11EE)X z8T_+qIDobxs-Q_7w3JuWk8E2f5(*lS&&S^JHh9Ka(YE$3LJHU5kzR?y<^jy^JwVIg z3}$Y=0ZZ3)8tkZS>_A0BJ6gK>P*q=#n#N{Guyhl_XwX}sFVG=A zDncbe@b~h7@3pINn2g9uO@R*|dtJS(23so!x{H^t(pq~XIW1EG@b|y}gTpyM0#Ew6 zngf*1E`_iD<3CC$%+Gd-{G!S)9Doum`N4-j!Pmd>O}y~@Ii5Xvh=&jE;ql{#xOwXi zW|lXQl#xpiCLtm!UY%<1?;ip`zhHP>^TNfm=c)EiAtRBNIK+pl&y7m)4E!n4y}f+l z=^cvWXZ+z2mIu#xBRfYTl|vSlRt`ZJhci@w{#jYH6LGi@8w#(qNSuidMS58|@@u=O z+&(%+(>oKonqfBdNi>eHW1J(pQ*2}B61vx3fmc=|JDh>AApAm%v}7_bsKv2h9igVh z(Le%^>hA~vcqFiZUo$9R9ub8|b#;t3PR_?TqJZP%V_HoD@CqAo7a=9PDJ0#0W#1f} z%|kGhwIMM*8;|bXzzD6I%v~8ZIc%U>WpfJIFf~~mOj2XvvKa{$GX@6-R5qCY$rbp- zXwW&nfzg!%3@_cr5<6LG+d881+6jC9eZtO-@9SugguMv(L={p2irwT@QvSOI7!jOV zM*toWfCV`18AA(P#ST_Pz|qRuO=xMXLRVW8#)k(`;*!kNEDo32f@rlIAs1FGpe=$P4svta)(Aq!2fx(WF&OtN`&7zR*pszYAAjsxeeh9R@S3M~N`5F7;$?-0bN5ds0Dtg< zKV#n}{61oy^!I<1T_IG33V{Fc;V%LB@oJF#llg)F@!$Uk{>R_{J^t=*{}zA$_x~UM z_W%3u_;>&Je}qP7Mp`CEVGXUS)`+;cBt%of2L}Y>jQeqTUpk9oiv|u|77`=;ks24u zkvomn%8q>6+7lN8aqM!0+M{}kAe6balVXDd_&gw*4KWIr!s6f^mx{0~Ej$u(;G1DV zU~Z|J&=wG#Ccr!+vY~U7qHk;-D;o!B>R+P*s>iiNIgLzCJEQ85ofLsq7TL{lnAYkz zVRw|!I~t(jl_f~vNErL`Dxo!UfKON{p-BKr2`nTK3vnt$hig%JXrJ0f&+HC*=l4+6 zGYwl!Hwv6}Y{(f(0S@1R!R&U=0jWD)6=bvLu~1r#D&0A z)b-7yeQXtd^EdJ2-S5CyHH9OmlWE26e2j^|NzsC-v*#(oc88Nill1Re+N&>1l@XT-BMHkyG=jKm^A7q6)2aywO7eSe&7~1~~ytRWk9m@fvZ4uSux1p(< zL)*ru5NMjm@u*tFyXKKmy90my7%oJa&^$1Sg2FP|-fcX8`;+LMoJT|NIL0MIP3JhW zjHRe)?u5ah$CayB;U5?TqrC)4d1h2Jb)v0z2-`PrV`OR?Llcu|?;Sv6YdiG37e=E2 zDM<+k@b^W4pD+AJSapw;p628Puk$5f*}@PzsHYt^gO-XVQvtBd zX;Z7=X$jGUV7#)$vN|kV;UpnyJ8hK!u)co*ZG=c0t>6?ti?x0Z@w#rDmepQDP86WP zSe@eb5fBg6pPikT9o$b#0G6Y6@H*UlGI81~3WcQ=C@d*a3eHN1m6kYBT~&tiVke9` zEeu+ny4oxzwK`o$2$sl(n){$telQkC{hVsLyKdTkCou3bcCPP$4O>=%`KSa;)-`1Wu8Hny(c zz`^|oxc~Gy+PZsSvRP17TaARoI0Od=AtI7iIFRBZIYEV;84C0WV?PY=_NP6TLKu4Z zB87vpPOHZs{n7XFlMg?@2Osj(T;g3JSfBNhHg1me!yjjs+w6x)&5x9266IU)>#l`a% zaq--FTs(aSp65>^BETCl!TyMk3_&O#2L}b?iU)5_L^5>F24q<4&@i?~^(W`@=HhH% z4o>)_!0lQ*{1Z&bb+r=$qp-Kl5n?%1Z24@gW_I=hoDb39oKLLUCe+l{kK&R#EbhJv zpX53m^)azQbA%6|`Xl({38&rkA`?%~Np+bZ*sT>Cuj^)80D-^V$2SanpR zDASJ=pFCG8<|6>Q@w3XgB?0MWDh^N^LRww5_+c>~&JhvL7JUIN@ZoB& zyl$sOE+_0NSSksY>ar5FHP)f0qZ#eZb?SAKK~^k_ptsi}Cbt^r0|c^(sBRlkS&Z8U zMp53-hW61#Ozl2JhP?r4_9kQ%^&-{Yj~GJ-PJ~E2WiB)&9q5_g$MEVsSZW8=AQzry z#?`D8M^$af&Cuomsp zTk6oNvYu6x^zN~~K8hEWfrR%~auTYnK!oBcz8`nCtFvrRXF_O|{d6h|(3NO2TwUuZ z?%jr~a~W0r8_?H`@%L@Q*tm?Ev8Sk;cnSwqZS}}K*xO|q=0$W(Y$7hpjIsGGEbiPw z>%bVD$rL8H?!!^ngEHBIIJb@hok<;tly5GCp{N$2X?hN#{b=qR!WX{ztNi(8Y#-dm z(^uX`@6ZGsu2QtLbRa%99zlU22nhHB;xkN-I){5;FQ004f#tIQF|9>JgB1C9_s`q7Wn z*&sjs(U0-lzx!Qvo@r=kIDr;|*r-^Q`8h5+4pEWOh>VOuSa2wT=Z~-eDmia2N^?I% zgoGf7H!U!fUytQTZmC4By$*TKHe3kFR{%Us8+?|H@uY9Ix?Tv^!7IsztBH1;j4Vh|CdE4IU2{r9fa3ct3?8AG;|FY$O1U=v%zQaue;7+h`r%fvaHz zX@&|Ursm@2&Ki2!8daJweO?xYN$hb83Ae2qu6CZb%j9CsgkzVRhOfssRng5 zWdw}{CZiDslO0-nEn@R)aEgP~39nd`HuYd__lC-S*Ge_kJGF*^+J;Z{psL5c*W^aP}~B0<1D;WD&g*@!G&Ng0+Q@}y$$6O>O`e)E^9$q>kwQ`BPi=! zLP_g9jFrPEX`6+;y$9%6(^%NKiH_lE^o}o5T@Ry{_3Lm_$veu}-xA>O6AVA^ zUshGnGlJf#&q>$?e3W7i8^=n`M24Z4jk(`)J`JJNX9`dqs zkVg9#8x_sbC=Q8n0>x;=MnoV!IvQDNX~;@XM`C;u;^R`Nlu{6%l80DY7D+pPF*Fy) zY1!n|H97sw&4+5wD+@=iCDG2t;>hJ_cAN|x_07Z)pKL0;EUK|wHHR3HZRhCv2z!s; zgR^B3`ISoqp9Dx#>4^;{EF`0f08o;eN-8Ng$pJ^J>n8JoVN`_#;n7f8DB;(_O*kG& zu*e?b2?*cy-FQ_s{~jPHmuLUQ^(AL(fEO1lrI4%UGp?+WytrKf#o7%zVqffz9H;Yp;FDc1e z)vB*RParPynuk|`;&E9Z@#AOk%ZGnfDXNBd2^mpL@(lT%e0440DfY6hClm%3Ok^x1|T`6`t(NFL$ z@7_l|VUp>nMfbuU`c`hDW^@;h?rqi++k>cj-b;5$#y}WK*wER)e0YRrqO87KWn`&p zpF-upJ}yPET?FLfs7D;qt(8>z^GMa(X<;X@a^neA{}isUoyh*-Gl7|Gzf#iR6`qU} z=dZ!TCkRH19YtkTFxp(Ol{KQ65H*ywqNu5#N^bMn$(>JgZ%M^Ks(ar#nJ_fjct zTt{R77{*t((KEgPpRfdEX{fyI#Yjp_Lj;9~zmGpc0>cnR1sNTAxDXi}5{8Jda0L1L zAI<|_y$X-39*B)gL;>yb_x|9I)Z)is?B7QrFdy}ExgI|Mr3K~)acF`0khb^3!%>2j zCKg!Aul&ldAcjy&O-e>aYMP1@l=BE8LPFus(MQs9$45sYE-HdRj6yoUN7Cxc8Kz;u zVF>UEL_k0o;u6vknUqHW%BFgP%`26im~fMj6aw&wZyt{OWf6!ew8$wq=9R!sorQ~$ zW?B>t+=Dc53(ST`vW1pp9M@Y#et3dL2a6T@_XwbF1kA{h5bS>?pbKwAC*$#L_WTC)d z$M(uRty?pkCId{G9A({#Z6;U>@|6P2lQ}@MPVEzJY-~hFPcP~?%3lgjM}7Yy+9b2e z#1^LaUO7C}`*H?92j8c_Po=@))t{e5KARK*-i_B|zDB|&AHG>dC>z{_I|qz2-Vp>~ zF{O&B4l{b&8qm{v2*BprYBbc>(EgfH=(JJo)e(S&s4Oi;eRUP;DofE^Q%;!6 z!UzE<0n`>30oZ_u%qpDmNh1Jb(AGDBo!vb+3X2gHn+%P$9JPeGwxSDlV;d+R+(yIn z6NKcq;<%i|M!3j{dUCePz`{+`^)I1&ZXX`u8Hh;IqP(I8d#khPY^vqo)zSJAeuSVb zhDf~`G_o@(L#b4U&4TuxLCmb(qyn@d&02$w`CatV64wx_rK1OjEBvzX!E#(>q;}vO z2fz!y83+hT!sO(fT5z!z)noqFC*Ye}!aC+4>=O@5V<%=0?xLWq9NYJwTb32onWj&gvJRo)#2psJ&dgEuuf>F*LN^HzmE7UE$k&#DmXleq9Zyi3^D9W$#Drt zOG-s{RvwZmK2j+%(kV#N;^L7Q8Hw1i5QGHfhaCq}VORQ!-wVFkc%Pytfu$r&MX9;w%rEAYB}83A6N2=F{CvQIH0 zC;;Js0SNZ>!Ns#@aQWf|czbxk^QxDU>)}!Hv;dh1Nyx)le=5Ce2{`6W2>N8;xNjOu z3eNcPChLo!V*}FI%23ua1bbaS%#sy`w)r@L=pLMd^HD~e2{Uq3H{(o%OF>Q&2nhJx zWWj(+Q1bd6B{(Dvy37U2oS7SeA}78bE`AV>w77Cmx&Y8kGRO${SVR%JM^H7=E?th+ zpqt>UADu_T7_Cg(gv!7yDbOVw%+2jJ^mnwtDreWqt`90e0ian!rA!5wn--^FV$v3% zp{^dS9bKqy?Z-L)L^RR*iUMqz*hK%*ePp@%RZzC%B0OBlmLl+$&&JnOA?W3E(dNlq zRzN0IT>lyejx+^8t88&|xnQ*zX>Uu>R9l6bGG1$HP*q;0cJ>(cS_P8&nkuFIN(s#R z>S`*$B7R>Ls!I4f%toq637{^7)>?}QTJ3YZN2jkvqH|yzBcp=|kBmZjWj!*qh46{j zAfvDmix1vHZp9!9Y3DD+$+^5#**@vemJ$X_2kh{)%7kTk$23d?M0jEWN=hqn@A^7A z8frLz|xPAr2zs@@9gtlrB_2XNZx$zX8Gs{@H^OS?bI;y+JIVetHnO3@I zbV2Rv(VJbcyDDL(+prgv!(ekF-)MnO!k1hna2Cs|e;G?Dzt;-0onO~d0si6l)oQP} zxWhTWe^ghs`pd^3{tK|bQhwn8lp^tf$^w7L3L*gySBZY2)ZsV2`ZaYhb1WOXC&72^ z!g=^zyMjPZ4+Q&oBhcFi9v3gd>(WJBJ$DvokGtXAsgt;RuV zRCLeD(foRpq}+1AJ(9MF0K7^C*fh3|n!zbvS5!6=TXhfeY*mPjPsQH)5*1b> zY`OxqUscYtEi`Fi%Fjhsa-5n2l#Tro%-h!7g67tCls9zYv`?Js92MP@=$zf7eSCln zXD^j5fk6eRz!yaI$ImA4lMKePYAGt$jn@%WiYxjV3Stl&x_??sTF z%05k<#y3DU)HAb%R@R}baR@^T`$)**-*pt>=H?>W>#Ed1l9!qYquL6WqUHb(b4$uj z5F4Bhn*!kQ>?T4}G)S|Qp?z`{J$zo>w~X51eL8}CDrnwY*-y=Slp_(`0xh^2XGff_ z5;@L#G!9MiUT(oNzL*1RK2C%c5Ri!|YwE#uD!-0F!m+sz)g18ZsAwgHzPn#K|Hd4a zw)Ux>8}M+d8vpm}-T1#=uELMM)`<^)V+sHHTO0VjFFnEZ^fbyFyZE;np)K!0R6!N| z(~9Ah=tQhe7K>WZI=Mw~U&j=cVE5cEN;<}1s_sEG_z?m4fyDdqe;@wi zPY(Mv;rHWz_%Zwazw$XiNroVMfqx=taR@)91PMR|MEM#kPyiSa8m4To$E8bZLv~b< zA6)F@)~qC$6C|9$ydLqS#lA}Wa+TopV#o01Yd*P$ zw%bb*v+^-Jz!BQXV-hM8O#9@^=Yd+Bqy_efp>-Ww!|?ib%v^trrQ5F{Nn3(*-ciWR zF2Ie=6=g9CO**xG%a|_^%u}5=GbtA736ZcHXeSAjj@CAGboHRFeE^}UCaRzbbQ1_O z*PmhG;58&$+HvG!Iu)L*YRmi|!7ldKkI(rz<+F;4b)({Sm(R-gACy^)vR+Yu>2SXq z3Ugrz6+;mWMx%XEv|)UBHPu3?H50Vme~VT z4DRAuJe3#g^Az7(7OiT#WWJtbJ#Iaw3S5PuxD`P$*|g)uxUoKu4%$+gO2|o$hc+V_ zazJ`M0hphWssLDIwvD>D$;g_hx1^*QI#A+!Na^M;9QT%Ih zGrIYHhL*N4$+kGVb(8O-6IE@!Y5}FXwGZ8+Q&_ukpw1-u!$1BL6$CAcPo=%0?-k$) z{C>j6KmPCo_1Ztjg`a2ng#%EsCjO%e8JFijn;=!+!_nfaU-~iv{p3)V5QK5W52w{l ziVVfwomH$2G-I;dh`Aao7VGVpYp`R!tr#P%rFi}MT}%%5!Rwj_l|nEALc`%35(VF| z1Z0>>5tM3xM_4>!Q!?Nc5Cq?VK;-A;p{2eKd)wQ%wSN=OUw9Gs9zDj;#2l4PC49qE z5t6LusM-bJv`QTH(crki!cR+8RKSL%$3=GXZ4woVe7<-1QfQa`}>)wLGWd*Cc383~i4 z7}i1;bcCG*(i-@8je5dPtAjzWhlv2xOWs1hE=L*2>hvK1b$V6HmvmTC zm#Ktds!E3?dzNJmP*zqmO-0a_)Tl%iGkf%{x@4g&E zHCs7Bl{Eo#)hNp4hy@>huWX6Dnn6G%BF@r)^1($USjy3{ypPqV@1m${MID)XF|+^` z?K3KPy{NteojpBhYheAG(oyfoL_@I-O;t{ejB#M2Dor(&sl>kd#oah^N|J#H1UVRA zOQAzaM)mLl2G(~mxPDWeQ`|PWgFIIo&IjIw`+35pf|7=ZGc0ML&%HzY6!$#HQ=iHSi90r>g1Uc}SYQLHywvENmU zo82YY>S7tF##CoDzWC|4vAwo}09xSiuqcE_#3C>>8bJ{WNH4G=fL7Q$C=$uZX$TGu zQ=9eYXXh|IF^<-j7PL|=b@%pSV`mf3Uw#R%y#5Bt>ssLxmV{J8H9Qlj0KGG5uVhaz z8_eYdT#YuNqGuf$_I8A2mLT2Mio&L87^{cjY@K1_A3$_LC0uQ@$Sma7S|^c16;j%> zi2RB^q!qR!D60ew6St64I!Hy3imQ>i7~Qyyv90T98eK$r*EBTF29!1QBPk^dxAzVY z^AP}w1uirdCCS zZ(b+ZsqO@Vw7PDzzyiNRwJVn2fD^o)3gDHhH6V>J>ReT;>Zd#+VX(Piu-Fvl$YZ3KK`E$b{!S>TTWsLjq$1B!&m6cySrNToBq zas!EZ7UVmtuy%(kZSgw#mmk1TGec#Zs}!JwKOGb0Mi`zX08a*JaVC%ho+OK<@()OH zAvC)Jk-3$K*VZ5+uNYA}7gCIcNXjcf9j$g7)m2Vm6OMUh!7s&*8!vqZtM^|={g9mP zvW@QkDO6N8A|XBrK^){0($dg3HBTVlgQlcKoq?Qb@5I$mgGvQ=SxU44zNr?p&Fo-! z;}+H)zNt>9lR3in={sz{orGQjjtM9|(%|l$hI0Yg@R7{iq1o_an+#3V!d}^le0vSj zbwz4$a@BO8ZD0~@eIxkZ5B?NC{4x8uQh|pnzVg2hfARtUd#DEgcNY92$}b#%GSBz% zmYKuANvW8_3X^|wVw~(ANKZ*c6dQbUbTkq|1MsD{U%>N~AuN<-W3yhb%6zRJQ}rec z)ED8i@4tza`8fpo2GK&tAS5UXVG(hNj!QvUtk~Xgc>9GQAvy*LvGHhYYQtbJN4Kg9 zmA%B~aKcKv<8ax~+)|Gl*SGNK>2u_0tq4t_N(l)<$eTdS?3grn+DO`H;t6E?2qOE8x-^efHr-en)4IO zCRQ##HGu%s5r78N*VLhsrKqX}XMEyNO_(+g%%i?<0TrEdDD7B9%haPot1b&W0b<<* zf-?U{YwjoZ+(4+9al%i>PMNKCf)sa90ZORQ)d)CBt6*~$!D6+-NIPjZ8>sq>EN18p zRCff7jz!PcjkL*CRGhb3IcBrxaak)Jb~ZE%)1At9#-*8-Dq=3*f4NjZP7 z9#K&d=0VwAUyZdLU!=$D*A7fyCAAQp|`I$Fy zIUogRu7xT9?yk&y1i%6XK&vKOg~JE{B_CjRO1xSjmK`bsLvk?sKH{ot_wTx>qRz&2NV(Z2CIY4f3(3wHY=nncO@1U83u2)Dlj$H~y zU~(2_uHVJN?Z<3)2PkP@Mk1Acvc46G##Y1`n-H8+N;~dAn!S+&aU=BA1IQ~IK!&pi zn({G3dPUjRGMB zF)6wDqd)&k{Fuh>BXg(v^I<@=!~;qn|79HD|5B6^WKI3(M<1v;1F5WkVEMuK{}7G! z^(yPEzn3Qg7=@&;0DR$%CwOgZ9CJl!*r?H9v$g;WRa#6`>M`6QSFVOXYK}C$2Zh5kma4z=$P0h zxMm5zWfZlI!%{bZ?)e)iBYb)mt`lhE7+SxBioQ9t&g{X_I)RbxXRtL-v+*UsH=#fQ zuz7rn*A=u-t!0|35E7e*jEsD>3Ov}=s-P#T&!Wxw=uq!u6lA0*02WzHFi~X*0GnFc zP~F^%^Ztpb<@;*rn?=jeDs9y+oQ?BTuC=sV8U?A_!i)( zMp{goL8j z#v++V_?TbUYc1;a0v4@K_HrLCf+XgY)5Znj$VqRMRyR`_8W0p5&Vi~Fv8j66wp1$E zPTY9;(}c(!6td%=4I`{+LEZf`k?U%qf?gvu)=@veGPtKY?OBg76grBqwJ?FshAIU> zvB0L>L)E91j4-*G3V@OhUb1WV_K#v>aU0R;TI3h9y+|DrQuf9P7#ijd=XhnWH`SkH z&2|qo;kYl0Hx(eEc!n1Fm`4Uowd3enBKW5EFue8u0y7E`kyC**LM=gCi_2lzwEHOtN;jZ;@dk#s?xV7I1xW;7 zP;xOMGAa<0T}mZwM~=Y`vx9Z4*Qu0hQHeS53X?FVc$~Nv2e(VKz2|6u&xGUH`6ymP zSwi4;E*O_M(1b>3ASNLLKI~gpu3UznpAUR}y%7);gn-a6#3!fVkN@o7syRRrG%^n; zdgicSOMjQxUnz(4{Qn#eeqQBYgauZWz>4{}g8u*Py#-(#N1FaEX33T;OR~tan3+e+ z%*<$!CCkjr5GS_dILyqjyGb_8%&^JQ?JeKk(*Jfhu^o86=dGTx$I3Wy;NtAJk@KXw ztE+o@db)n~zJ*%fKyiyd!efs{;)-O~_anD)kZy51Gs+bA2T;)?VLysH z#*y2y5Ct6*$ZH>mu5kouHN&(T;uQeJO6**`6l3dmqi^X>%nQjN2)vOHpP}ji#R8Oi zKdGmZR$#FNl`>M05f`bo5NBnhtGyEgLkrQ+F$4$iXta;4M$g1rOi2H@wFl|Wjl;}7 zmQa@#Zp{KTo0m_QIA7KKnF|mlp2x+SkxVR^tB#hVm1iof-6G*1oI)kS%P$P`e8b@% z5DQ=5Xw07<$BYsVKfh4;`G-)!YTIAZ_=I7BFRgUHX!!d@!N)fe-VD8Yp09rb<^`l< z?t(nn%nFCOy|0>0yP>%SKD>^XcPIiPvk?$qjv;yZ5ep)@M)c+-^K9w?} zMF2QHxfDy+?SOw|8sCL>R7u@f*95JnQMG=wG!B^&bZR;@y1{nR5nh%$@Z|P90U(df zNk(G%AQ~n&qIPsGN_&=~pmm&9_zDcK*rZxoWooPORXfx&3Qm66h|1w-4XnmIy27(U z^ORM%Ah{8afm!fLE>kn!gl5$tyLk-#YY))1ZiUPI0u~P0YAqHg&luRz289CuuEIri_~kBC?utQ>t|J!=8%Y02BU1;fUf+p|L9^Fh zXR~Y?^%b<}Q-ZK=NiX(oS&ZG=R^pONF2Itdi}Cim@2inqYDnvc5`Lt5d5E+;enNS8 z|KNYb1kmD;d)$le&Te29o1fW;6PSyQ&PATK9cTlHgdBv(B9sT!O?Lvb`HbQGXk9i zLJwWw(UrT=HL)25jf-h93~27{JZ4@Q-NMk^i~BOg6GMTaSb&!EvJ?P=k{Zx3xCLgj zVqrcjQdtUSw!U|A}}z91f+VLGH&^kB=8ThP69AL>W8V|J)? z*P+|#CD!2(-NEH*3C{X~RVZm&MvFBJZr&lv0^GWG1-hE*RX3QFm@sloh|I(Wxd!85v;Dnx$EFq#%FRt4UwJ(r@OiEg!P z6k>CmvEh8aXZLLiS`SA7e#)ef>_|YAguG_YFZAG5;GAOn})FPIMshv zX3J^s=tW~g1C~uM!bOMnV|=(9eavUe#@le;Ef?eY$L{2H9>Q;a{XXuv{U*Hm#_P(9 z`&3$eY0!Kumf&$2_A1p|QU|D?AmKAi_;z*90eEU?49#I8Pawzwf+6ES2JX7;PP)F{ zhz^fHpszRPy4bYoSXn?pybw4Jd6}godGwbh8h`Y96gSW>#~r0%qnS zm~q>T@H6wsR-vVLE|2RJ07Gbjw2$t>0$PIpF_naK0X%}TF)ut1ULiT~X6PB315a*y z1?OVU{4BV5r@`4P4X!?^4CCMxs8jM>Aj&!^FJ5P^e;T)`pj3DSCc|SvBC^U`5t^Kb zfS3#<7gW);E5`h|9CS@?M#t1vq*V%; zuzCkNCg~NiFqRhSh^$u3UXY96!x}V0>%{t5+_;$|a*%zkCFXM>|oLpN!VpTm`^An-}B4 zed}=Hfi1Y~;`4F-{++n@&fAm$Ljp=Ouo!#Vp8!x=fmOwKQZ+5 zm89Ck;Wp!?#E|gT8*f2?uRo%~!r?x9Hk=7GXDf4T;*W9RhG{IP%e$tt3hTP-Fx^^> z$+mj*)>mQIrVUuVYzbVP95Kh$4GRK-5EdGPq~t7Q=U2ifFpd`BTue<&;NgdUjDv*U z+V$(P@4y8(|Imdva`7c9Tt##LlFP2d;$?B2QogI%r2 z&q!rvCGcpuNGPKiGU>_*0CTg_k(Qo{vZ`vdboHUWV<8;rx;GNky;JK5?bT}i2^nPH zzx)E25p0%T(w{Ml5X@07@5w%m49z`tR5~+lGTZ|5={ip!F1H8KSsjSTXhm3B6QZ-* z5vglaVN`Y-w_6aN*@T!}*=|M@GpEEQ7WN`0rvtHh-AvobZ3(-$&+BnNO0JRB#;_TY znGFa`Eazv`V0J(fva9=0Mz=AuvX@raAQrAWgrJND*!k;V>z_kQD+Bg~poM2V(kpvV z&F@=5SGBlx6tZrv8(r?e@B~!Q0^GEQ7I{+x3UryY_+kk_K07|gT&e#f1XBpWvZ7p+ z6y~Ci{O*ibXt7^Kw5z2^R)U?X=JjH z?l1B@-KArFCMBKg={mb7(xuHoNLI753PUs75k^1e8Vyr!IBf6LD zr^Ppo$h>w$7qug?v<1D>YjEQOPt#-AfEv2aOSWEuhTdf;uI^C{QHS@g$D+YD#D@AK zKQjS6tuk{^A-Y-`=rJUqJSz#ERRw4*&O`%MSFU5hP===33bZy0#=i3o;{1b0aN$LlDqT+qZ{D#JTXvsE0KR~hp{39< z(-k#Mz|J!XzR|guT(=twmu^7o;5eq%(4}qZL;u7o)OU_y!|p?SwyO z=onstzVVf4=o-c1bvrPycr_aP7omT80}2`jm75$_&;a+aG_+5wL)W791l2lBZa73s zitustM@m{YEx?t0i5uv$B@%YANR{W1NC2kFnih$4=fWY2Tc@P!P*7Tl(wau(SGL1> zUL0y^xpYmepar)QxwV8z#}qBqeS}{MWQu!nbIm<72okXf2|h1oTuR~ufL78CXs&dT z&?!s9Ehrx@1kS909LxzS;C2qT86TXF*?}_SNhUJsx(R42rNN+iS}k(!8dAXTSptuU za%S>U%n2)ndw4m|D~5ZBs7T2zBp*)x>1t902j65h6Uw}Ze0bA!3@0GtOZs8IfMAh2 zINqa$cP2qd5X~jfYWnFKPNJ}7NX^~XOiSI;#TPb?b5T=MPYZA@dfJ-Rtl9!VaeLGF z9J8fhNl8RPR49rHvQSnc7GOU{r({wIT7aX=Q9rnt09=N&iVpNl?^X-po6RHKd~#v# z!-7nPMtT(~i`r7E5mX@}&sVEzkV3}Xo9X9eFfH$w&sJPy^SL@$x)bCK?R|8xp2tG0 zXC=z})}m&33!?M;;2u%Q-y}tiTetR#KzV0B_FZu!GAdiqKE4)5ZhQdcO~ddDN8V0rV*v`%qfwNdraIf_ zW~88|v=BQtt;6Ac+X>W-80l%Ew-Jdt!cW$8DVJHvE6b3^cQPd*5lQi~-cK_2?%J>A zZ{~f2`}=QQ2dMh~(L9z>AO=fN9?-|qelBq2e^*|16@umms!0%HqNCv}>yx^>!o|)C za~!PU=jMz+Pj@Wvn2QkadGK&_gsX!+TwR>tId=|1LV_@VzCVJ3g0LVk1Oaq~!y*$g z*DDydw$21aDjt305nOTARam)tEzUb|7~8h*!H!+~u>ZUZ)TodfZoCPX^Y|@y-HU5( zy9=iQL9E-p54#T@#pC{cOO5=9BJ^bHrWDn`PBL#oOc*lLQ;?FJ zijwjwHT`*BMJt@Wh@qo_zCzdrL#A!6-yB_uC-S# zEIqOqQj*4l7R>Bqn7I*#V#zQxn=PGsC6su&cXK36qI<`}r*sf)6FX7Uw+>ak>rv9V zmhtgCo(OYyo+BNCMXpIa@6@>#bQ4uN*H|is7Euzc=hA(2j^gonSkn@>B#>oxWf?VL z<1ekhG8Gnq?H-4$+Cf@>Q^>06R&}+teM@2Q9tc}Uca+fGTfKBKVNj!B7Z(|Zq}WKr zMTa9fAqJ@gVq8=RaU!TIh%|1=$S@qQLJ!z{#kV8<@ez4+Q!dm zp$p$Qj)B|otHRb5L+ER% zL{Uzrnk1vEwVsw;6`E_yP*<3Wro31TS0!WfU@6XD-G>#!wJ6a=p}Hg+4V6WNW(G27 zc#QP6;L3~k;ifAOVQRP?@nOEGD$YW2ZaQi!iuhTT>N$G3&%vD8u5hwf<&S0bbq+n?GNzU@wa~M}~(YI5?0H)Fg8X28Yt^366r>Tz|MY&Q@cH4_$CR zo_Ojh?AW=7&^v_Pdk#7DRGn3ERwl{{SQ3|%GQ*}LH91DPZJ7kUELPM%x(G!z9dMi%gZ{-^&_Szm zY}Hc*S&5h(M0h9E!7r{B3sRck5mn7|`FXSXxvmUd2|59%3-=X78LDFh=qv#s zHAky|HFG8mUAR4)$7aVdeG(x^Fsnuyx}J2^t;7;@i$z|;DEgP~K-8rcYVI zA>r}J&dkBqb*nMl*QE-L@ZbdmU=-3*6ObpPYBG|M93P3Id>sl4b1=Dh8jF^$LTG$C zk_sv@zIL~2^=}^CilR1JmMjQlbdaj=lh$Ab!5n2poAI73yfS%zd>*s{)tGWxhGrfD zNa6v+dSvA^Q+a#!^lKTcOz7E2OC zaM!+r@b(KrbZjC5L&6ap7NJ&)lL->SL&Es7hN`Kt0)71vGCu$@Vc{%!qSZ{c5#do- z5D<)@;4p$O0+F!^2#@A?8mdMZ~ z%36nzTh|M($V}C^lHW8$7poIVMJ-4zX+c^^GaA~5F+IHk+1Yt&8lrd>5@IQ*rlhH* z1L6`=5D^`Z#FQMw#AP8YHWT^Pyr;>HblVG&TH1k>(pEGMuf)LeT?kIChRvK13 zu|VrdWXH^CM+?NxSK_2En=ItRIJ#{j2gW-vliK^x`jR1lK0J>un=JNYGcR3DI4h$c z?7UM62Lj7Anh+zvXthYEV3|(eLR!>4Q()miF*J84)M(kruq^?exn36TiL`bEh=iY8 zoEoiQ;lcg6GR~D&s4PD!{qWogW!11Ckd8uHc@GPawQ8}ThJoeCs_I8KVHlf~&w`-? z+qUjN9e=y5tZYO^MIk&q90f&%sH&+!eqkY^SlHy`7b1hty0*Co)KqJiN>r*^cP29|9CMD ztY{$s8&RDf$K#nOFU-V|1G{kFZPyZfi%?&dt<+Ipf&)9&;l?YE;Oa{bV#)X*t?3F> z6y>PugyOs$L`OuRyQ5R{^z_jC-U8H10Z>W>>e$DhKza!Mli>$^ShxT15$Foakd+kfLQ8!M&Fuy>R9B;|sfl5Y8eNc|1bcL&%hZ`gS%+$-Gv7p_<_2T1<^_@`*-DVGUMn-Hl}%x1qYV6RmwCD68*8adj)*;_W#9qN~xj za0*Qw{b=eOKwHlcA=!@Bo`vWdT8ypx4r9%>-6(CK1vxmb>H_Qf79)k=vz`|TE3Zg` zCmwcQF>v%tQlaboWQ@>)%Ppvbjr|f=H)8@S!TlfW!5pi0l{fC2u!I$Kyn5A zldCB1XEY)(y#WDf^;p1g0YlmL<1q>6C)FZ=nxDjd*-qBB=OURhWT_{4_!^2Ui~1hev*RJ05@V9^7%`m9!MAQIMI0)VK)d$#PnP5om8| z)~p=lTL<9_nHzoE3T4~aRIh)pj+bZQ|Y;U`(u3;SR-|VYAv`7xVNq%D3y9$h9SOg{DEI|OBOoFU^TXr# z5-)(u94~~0MIj`VfSBV-OL0C{t(?XK_uqpb-~R*b+_@d&izbj)T#k7GQE>N1 z=0z64Nh#DcYJ4v-F^==NhRd z2aO?2y!>e)S-Hc~-V>HKZZNlSf|l$V1guw5DCd3Fc=2WWerYiVdiS&cWp&PW(Pvk z3BwG!lH3nXZ{@a#Amnwz2}cRTG6+OoON(z&X(DtT1Y!r_*+uAft1u#~Q%T~(vjna( z6@DioB^@Q78J@wu3vwl&Ie(MSl^a_of8$3%Do676^4!}?J9RMIp1L^a} zP}T>Q`NBT<=r}&a$M|2C6z~7(n412{Z9y^|eP{vs#A3ED0p=YAj|Fk?3>qiYZxT<2p!cp~Nzg0p>t5E7q`tkOF821Oz|E(PV4HFOc< z;NoP5-mWG*`p^$?{Z*H%`ns^FXt)uU_H%+TKcktRu0}fCu7-_A1k7E7Ve1u5m?iNAPJ~N{4#izd_@YL_J2C}@b!~)YEme=w zrXC~`j2=-s_48DL`4#<#VE2X*nw#wl2Z2aS4QlgCERoJYiuq zmzmfD=9GnWMz->Xx$OeNF9LR+bU}H)=2Fk+N^pl4p>bd>?07u~x{vnESau$%v@q$m zGPI{F=^(BZGqS|l8A8u=IMM}n^2vb%Gp{`}vpqAjJ>wkd`Z~x0Nz9B+beq+-$SXs; z9<3nAav2vqH+?98?OIpfUoW6z(Baa0@C?qamDpG7v===hscc%$@+86$iW7F>sk1 z3n#a5dIj@YV0aOPZnOr2;LG=Gen>KWX+ileNI_;nC*}ncICR@*`DeqC-^)VWa=PT| z9pJOI=YlQGvI}js z1<1-wR14=f&@C4DiE8pw(U=>HfszR98P38*Yg(~=ir!UW9O^4_P*ZC8aN|{%;JV8%!nXCRP*+ie!ki2w(gMuS&P2$905mr=XaHp1 zm(I|pnegrEoC8pGe5SjrZGVhoGIZwSkMIE>(BBBf*MIlFSddhxz~>d7$;?NfxcI}$ z#g{L!2TNmjnAy_OVaaV~>B?{p=J?W8^^V{^Eh2j_IJqxCY-&D&<1*mr8Gx{)Y&7O*q8E!C&gd zGGOhUN*6VW7Fr5yyyM`=mu+rfB3cHQU}VV#)W=#rM1)RpmWlEJmsS!t!U5co?&i8N5?TWwFZ;4*HucD~m7EBkV7 zT2FK2JW3inWM8gtXyhG9 zl?dOkVnUd|InOhj&Clg`v=&H7U7zYMlm%;Pz~Hv3|MQ`x#{xlGbq)Rh#1&Tk{$#=g zT6pR{r7qB&+jC@}_b&G=4JoQ_PtMg~XE84su3;<;Lb74MK-RSuOHYScvaAB{%Z8Sp z)C1b^UY+I>g!E3V=0?HUlOB#c0Z7;_A8tTvRUUHElhqQc^%cd+HJ19i+JaQn=fq&3 zGy)e)77~E%*t)0*RoO8pFOa1c^099DVnT2Lw_SS$S_ssJib8_1kQQH^T2f$apc`E+ zb-Z>O`n%|jrNkpWIT1ng=cBQ%9v>f<(II-n=X)1eYyH*60Bff4M>2yf!w>m@{!G{S zwcq_60m(&}6Ow_VmQjSHvQ!UBzyi9r{^2R`kD$U+;S-z$XO9rL`^BQ7X$Z+VwaW5y zoVx&X=SLwayBv{(pig)b=0~R?jUbZIAhAhVNJ!2?N=6n!!@`l7k%o%ODx{?86#U{d z@(`Ys2dg>EByK^p=)w?{RSUnkB4ktzBByy0e#un|fO8|VkWt-%s`df2_YI?|y$chQ zQ&_ZEG>H*z4=kF**z(mFT)YzfQ!5F|MOe6$VOKA5%Bs*awp7ix7Li_xMVt1bs(%c{ z?F-fT;rijVs=m!a76>PFZ9SQZ-Q!>`V`OOwS~vyLiU}b20%6I_Y~jodOLqojL<%2-y+JQ8msL;RR&#qyBMr@F)FWy8!ZU1MzMcFAx#nGnH} zR-g14l(E4!w8*r58Sa%$Yek=d)%kKR-8gaQxGk-<(#1v=R+2t&25HccV{)$4Yw_B= zu54S;dQ|%||02(oZLyBzx~hK6r+}_tA#4MRc@62nEe!{`yjKE4tS5fwz?6CxB2x;k zmeS$djgX)$oe4sF7Or*z!C)4i{wz#sIa|u`yHJ=p(9Ly}XDt>q!Re7k(C{7!Dsy*A ztUJ}kg|4ijwU?i3Ma$EQuB&u?QLqz8i>o_VtUIfNq2%!7Ub{+1w2E z9X0q#15Y9vC)OjkbqwM8O^D2GLKZ!ZqL!t6rnC?VzL1nMBFzgx0#-7Pq>{`-=vWzI? zrY90~MOd?RQcb>b+x1tXp|V)764Vf)vX-)}10#!YCC7$ixUZA&OF%+QG=k?ZAOIUw z7dKfWMDo36_?%mvQvj-xKpq4ED3hOREy7X+VB4c-?%Ke6L3`>BgiUi zL|%D4D(afm+;g=p9Vo79L_XtEbIK8uQh>7h9s;lu^CMFcoWK&&HxzN%Wk}4gQZ2Y1 z!SQrwGt>%LvB}xU$SpxqW)9rF{V>aYF5LwmxP2_elkN~LIBVBPSkI#SKRX(Bt}(E6izW1;nYnr2?gS<+AX}!j6VOR!;CCF?U+MWyvVS>+wfE5^9$r$B% zvI1N&YzRRau4g4_BrO4IPY_89v(#($hGAA(yG&-EZ>9iQYg@kw+|>(-_dd| z3l&;`R)nN-a}@|h0#H6jvHaZl%*7fcAWz2gvn*5}N4l(I8b_FQx`(u>>BzHl`TU3E9&(u&~d?5SFTSB*BKr?DJaDM@OKcuQ@i z9)bmEF4Lj8AP$4&k=QYqjy+S=*fGrlJtt00v(`{ig4K&BFge_hTduyGKrKVF%#>7J zj@DYb!`zoXso80X2oLll2#b&y6R7|w^LaM&o&WSBF>++G6RG?EH*W=&x&Srsmy)^x ziIa5%KBWGkEWl6k;;;V*-`F&|l`+UFu0d8oDN1Oe^$qkwmy?Os_7;>@RwBEw1O?@_ z2&bDnKRl7}OM?4?NCeZmvvl`EXnFxMDq87+HepU+0xhf(xDt#B>3M`_9imfpu$eWN zFTD%hYfm`LS%6uxPKa9wEdaWcv!ZDM1i^B45IV;PhLIAVfYjIsBu0fIIX)Z-v0+F_kVcmU$S=x6drv^PMU8#%ipoSq_aY>hwjeCC645!0NZ@D8kF8P})ofOrlDW94%&-;?bc5}~VC4`^ z5HemW<{fF#NM@Ef++3oV$z$~vV>Ha^;yMRpp^N}DBQ(V|7PnZ&rm8L|$_18v>5@X1 zkJh7%S(Q2~Eujrq%WbXSUt?_vn8bE zB-^ffIrAJBO8OZ}ovT+H43S3*NU_bV`Jvg?w+9SpLog9%U&VwB?!bds~RxD&P{}dyC~sm>B>l z1pwovFpy`W0H~l(NULrv1Tx`g&3myD>rUMh?~m!^S(Mz8nFG6{_`J3N@J$tfFlpHtoBVUeF-Di8a`I-jzs5D~7$J z2VLNDtQu=aM|~MG=$1xcoX) z^-RJuG!dzVRVb)!MOH-}-QyTUrDh^5AsyMJ4QlnS(8L_N(ZO)>BQOX=C+|@7Osz#1 zRoF5}tBfzy_MJ1gz%L8k`#i>$!xb8{PRiL2&Yq zMNQvgct>Z$FSZbVF$J_R^Wj6yi^^qufokEN7fr?H!z(6NuRM50Q%vI(#V|65(zdmI zO|tC~k&C(E*>De|6;H_w*KQ%1`fVMRjoE=2aHZyiFkL7uacVB*6`lvbXc-2V1rJ_h zF3<7d=ePx>!-LzNJl~6&7oMxmk@cQkd5zh@(gK>HB-fPd&svZMC%+_wXVxLPq=zmo z3pQHJW{z}sPfF&!n@?Ama*}PjzcRaxBjv*MGEF=S3p1JZW;V}t9t>xUqmRmpWAz461`UL2s_=11aun^@fBa0a)3$ z9LeP@2ow2R#pNP6wG@ekP5fMc{^mZ&udKz!o%_+y){CB@NvzwtA0ZJ0xrH4n3$rlY zUxTWGWW0v0#OIJhP zCI-6D)mV#bF20BsA)(2<*HBrC*19TX3HG)(sbPd-0g8ng6Bew7#K}OfR3t(4uiH-?RlwwroY)#3F3F@M27FmFeo&Gu(?6JI_;VxMtO~ zqOf&<_tm48@RUh8Gb?znDm9?u07ShUEkyh1Ccc}xZm0jEx@mNIz(yMD|5!ax1 z@p3c}xXnXTXdhjw)I28g27bkrv_EQn#3=U?|HDbT8e8 zl8zBtvCYVD>_pwb1nT=o;TaN%pqLo6_qOA*D=tP|T{R}g$8q&F*PIIvs%k&K?xwIrpP?VF7$Y5H0wG~K?i$+yx2_cw_CKmWw zE3h`-r$F#rTY={sfXV~rLolozdhEC?n(_%g`0xY#>Hqx|&%gc}sv8!CC@3vL8BO}Z;Q_4PxEY02&4k+qw5~mf*v7?(Z(fO{wslBoS&NkR^+@m9h!pOp zayzw+YUMWfsc_f|Fcp|Y_X6@2N+ z>f2D=){VNZev~zLpr(_VmKm>-=T|j#Qf;VhZbKD+@Vb^pG`6?$+Ks4fX+~XpJL)Nc zV?%ofnmW7CMsT-ubfB@LlgB#MaHfXtKC};xU|@2ZuFNFErRbknf^J%tjRZt<{}>u& zRj$4*$O>lb*O^jrkBK^Y?KT3neVErI zl)A?jqlZ>)C-1w5+hXDN5@>@gaJomQ&^0=#_9c}44xZP?@40N_cB~`t4_tB;7O&lm zr5mn?2De+WA-xCrAb)~U$}2BucUSW+YczM zqvg19$8PN2w;Si5w*wa*I)Do{HeCV8eP&7V$f7ujg-U$G&MA6a{|%=G&Fktn*)&I1CYLdvVQ1C z+?SA#2Y>w2@A1s@PvMTcZ^gQGt8ifdE^Obi4Lt+28VHt}rWWY(@)1rT#-X z&?p3jMN=_Yz->RKF=&2pB<3^Ce4ZnrKSO`U`v*m+;}S}o@i_s!hOuOnO@NHI4v#@l zL@a_M;t(7e$L%xzU4qmcD!W)O zS}WX7%Vp-J(y5HRGGykLLziEHOm6GAE&CbymB=n>L}pZEo(+bK`nAh8~uB9=s8cFRNkkqjmDP7xtSqvxS;^nB!xoR7k>3s5+I5XBP*kvF&(#XPTi z;dX+330ACT!PV7-J=@mdvJ20{;;{jOu9%_=TwaciE0^Pn!{_6Y1G_Li+>KIQG8)SY z)zYl8uzYl6I6B(f6!^4-&uIAkySD-h0JVjZHSo!rq1w8kC-AFZ{~Y)I@GkuD{=0F{ zJ-6ZByQzEc#0@uJkLz!~fw~bTRn@R{afOwuA6=a)%v5kuBrxxNq+~m*=^vA&hoTUa+=z=Q)g{?3_GRXz%Q$W~ytP(>@Ro)%tpSqU1eD{=b`*Wtw{9>r@_%Hn3G&mE5EUGN@Sp(r&htQf zTMMD5wE#2Q>p^Im4d0f&0|3;lz~izy+^1su2>_4d&9`30<4^n;Z@l>;UVHU9yua7A zTxdnkhJ&LM92_*+@f!B_yuKYjkJplI39Sf8Yleo;QTzNHO9js_kfrr$GPkrkDGLiL zeh+KyyUdWSi8y1~5+a&p+jw7#`^-6nk+qRd?OVZ`_aHKSro?IYWeq!iPb>Ytq_?x? zGd9{k`I+iG#u1KIl)A3|Gpx)lVMSP~c>OWiR`HbO44H~EC3OuJh?bNU0c=T78$t_y zoW_V zt>m^C2lSXSrr|`-$R)WKp7F(~Y;8eHPY1H|Gm%%ILrqmN8tN-iTT_9Cnkw9P#~pa~ z(MRywvrpohqlZ*W^8)X=@R{odZ)%pK9fk&a@X<#y3pBmH6PguhiVNSS&M5#zvLxoG zkYR8v89o&lenc=H!xK+Fgy&y;g0Oo6k3W7to_YGmc;UIn@EmpY=mmJ@na8nu;|BDO zO+r`M3LCE&xTSU?s`o-zXRd%%)_PdzWu3bbmJBTw6g2=^=m^0~0pN1jr;cHEN)P;F z@{p67h@AK!6vz1@HNp>emS%j(%?Uq8IM_PEj+xEDh9F{wvlZB>kZ_WWDH)i@tt9g@ z6d8`G;{=09z-ddM*~xV%Yn7I;WEwjg2c{L^@*Fuvi^WPZH$zEdXG_rP)5>{P+%}fA zk*s*!a;A7KgXFpb^RFWt`95bOe%2YqkM;iSD4w%h1u*dSOsJwplBQ=ORt4_ z;wZf#dPIbsbuROUG7vVYd|{Qd9yZJ;R$1#{%Wb=yb(od20`6Ih;G0^DhTeX(_w}Nz zycktgC8(<@MMG^Fs>=)2Y|%&0--lbTxe~Wudll9$nL>YiGn%RiN2;;53N;mFxZ%2M zp{)cb*5CIQpwh?kB>1Q8%i6#)RrUvX@W=P!xfdSA9rs+1d+xmvH(Y-dFTeO0UVrr& zY~Qk$T8GU$wxVZjf&grWd$^7kU>m}F4k`dz>ej&`lOp&8c;?(U&)NX<>`mHs2H{6p z6M}YW6L25^=OvUPIU^I9Vc%RGGd?~;a-8roBj~hrBE5Sr@l0b*z!|P1c#(v zc*U0^F*BDXTowF1TxtDT!I2i1Gc7+`g3X?#ue}w)$9NmQoZ{+?$Xdgojk6; zhAGLlK3|gN>&P4KbG<%SbH6~w=?vR*=6GnKyC=V^=gEE9o_VetkBJOvPdjcnSAR^l z-Q4EFRpjbU&E>x5SJxa*%;q&@S~XX7AKJdL(G?XEJ)@*m}xSYdl&2pt?doYwV zvadgn_c>?ITsS&95qfmHt)%{w;MN0Bs#UBAMRDtG=~al8FEgE6+c?9*)E;r40zAndRykX^PY{Z6z|dUsO$PG~0qBsm3eFje;FI2j^0qD%R8%56 zSBHj%DpXYzqOvp>D;FD9+2qeRtiV$DGk0>8DwJ(h%|y0r+n| z7FYpL`US~@I3Y{t9j7VCkN|w@>4)+9n=jzfD=x&o^S0sgD-PqnAKs2<=mNj+;!}9< z{daKnjW?<8D7N#0VKz4evobmm+INUQ>`J=4TlgbyR3)51Pf9k~w#?lO8-}+0u^nh3 z+NG|BW6B~pCiTH1wgRyk1t=)4go}eCEk8TT0WNfZ?Flw#?mG~Gj@CA?j@3 zq$HiBmvn}6K2LI<64RTOOz_ETevu@dN%1~&ct2l9*?FgwlZSMDD92=5?W;I_S~+Hj zqg0x#TuthDJ~H*!He4$+mvNMeW4bh54pON!KI7EPudZ||EhA4;rd}DmzDU2HF5>4% zXgHpluBDOl4cACc%|5!V1iGYAWzGHN$`M#N(n-P3;c?mwL4_2-* z3ty>Pk$PRJLa~*4LmRrnw%#yvjDdYbJ8Y5{!7Obx^92n8y1!-_>tMw^Vo8h7LaaXK z5dohCWtF`d_Svgc1Btf)kcLJ{Z7uQ&vr!|!D=$D>Qx(=NU!;cEHB`#5xJp!)(mk%N z#E*0>HK^_4(i)Y%yt09kuwEULP~v4<&eM)-l6Yeo z&eJ~Ilul27QgSW5O1ZDyn`xC*o>FNAzt5LY86|7ZmhpRwO3Q0dA@|ICQ}L39@v?1* zlQf3(vTsPQ((12QQKgTQH2U*SN}pE33i*!Z{Jvi(N%vWm^O*d`BKeI=)!dL)GGkIW%sh)=lSB)U05oU8FV#T;I`d2dk222?@G+lc(MX_G zXhEaFK4&$YbW@m{(x5uB4^J;gMIG16 zch_dT@Z2*v_TfKq{MZNh@WX!)hW})q7x-yb-^a}BGkI_>bnfc_DK#dT5ab5`W9dKu zKKJyac;k)daog?J;=u>+!aaB0h`a8%0k6LN3?5|Za@QTV;OJ#nptz<5$;Ax_$f$%( zTr)yCFX9i$A2?^bk{N$ou>_SBNC27<50jT;kPBjeVtK7MlyB$b5z80N{aZMnE6Y%Enz92 zQ&C~17Oy{UI5sn_>`VF*K4;liaom=;QiifEX;pgtIhy49l9sS3`eKzBRLsKbG|6$^ zvwXh(GfsY%Uh-WE3o4Wh+w%F^wuF4f1y#t;lj96?OSxU99nUXEQGOZ92*R-72=yMG zY`r#Z@rDnmaJwjaFa?%-ynKEp>n_@XgcL()y#j%RFG7 zNyC7$%4UAiZDT&!t{D!@D>m8mj??dKyvHU(#4W82dP4d1e zCVZRvPBenZLy@N7PiPX;1jGpf@R_F`#!ugW9k0Fi4BmS4dA#-dbJX*Ah3@ap?HjRY z=Qdn&`IYDznxJ{U5MenDa87DRXx9<`sB8E`(gmjFXGYUr0I1+6ExCH(9y?O|gkR-YYVs9A-wZOxa?maec3rMg5Aic%U& z%bqP=<}A8BMFKXxikabyO9d$0*KZpDV+=sUwgGg8c!P}N43PRNGF(GGXQqne-e$_g zHAIH%e3kprtQ>9&ECf~rm&6(NWxKSrR_zzbz3S7beG}&xr!&Yn-XOzoBG4`(*uJU+ zjsmUH5)FnL5c!!3#HY3ebQa9IW3S(&@mPRpi?wj-dlfI+^K!K#ZzZT}wnmik3Hi0m6PK8bUkSg%aQluq#9j!s; zlT2}inHT6WS>*@-X&}&BvQT+sCG2Sdx~I0Fs&A6{Y#8xbrAXnuCgm0*GClz-RxH6| zk3EPV{^(BJamP(~@~KC0S6D2-6Ca&8X%U_)opS)n zP#6KAHY7$WM^7jKzAW{8@4SMayz?^Nq9yqLyD#IXKY0z$Kl3OK?AwmpZ@vMS&;s1N zYd>`5t+1Dg9~0UT)_Ise=34b5D(KPORiOeP&HilZ8ncc+?poCXY@Nv;Ic*${Nu6+u zE znShoCUtX~aN|{MZ6i5UXj4!KEuq&1fEg&$!N55@wF||1Dm?i>2GQ3=m7Uh|AD*fq_ zYiZK1QB?L>74zO^$|Mx!dS62)?@6TpKC*8Jjh}(>u|hsW!}%xgMZSyLKNUX{&Ju5s z_Wc>slKZME77>D_C3Ic6Eizbi%6jB>kzt#X;}RN<3lQZUkUHnQLc*@FLhZ|TUI76} zAPNKpu(GJXg}E)QJ;F}FN5DyAoAfNO;JYUPlzyJ7k0_5z|3THaP?krqnGZ9E1lYv% zz+CzOrY?h}xWZ|xXc1DN=;9l+%cKT^$m1RmjM%Ml0Rrzx?mtaYA)?mOL$eUc}3jDz4-7@?_N? z8T0==09E6V08sh^N#x6t<*V0YY{_aQ8-!fYthV5t{Zc z$j;8E^+ND5BT8LPDIp@z6N&X#T0vKWFS{vNN#+&kNaimoXU3W#Lpr&Z)EksN+wR@3YHw0(jc+3e*f%^i6 z{^4qf-e3RmPc_0zEWVEkIt4)00Z?D%MVIef!%y^`aDinK1bJ8|#6*^k(4QX1&wl<6 z-g)~~{NktY;Eh*bz&mfff|p);7B9Z?9DefCpWumSo<&`27a|ff)vO=7`d$Q;k0Yq# zeANo9N-_bUbb}FBSOCa4EB>%jM<{h6)|sndmAZrgTnLBcPPjx7eyKSKjEvJ<3BE|u ziB+sR0iX29H%K5Tp{gfjC}~t$%E7?}IXMM+RQY-St=D9&ck?c-Tf*~Q8U%~6qd*J_uJn;`4`{YBsM3;AHbP!iua|O;ndJ)Q-THqHEi-4F^%nOcGGlz^U zS&7b(Da6-~BcgLZEjyVAK`cFSdo=)B>bAg2w;4971$Yf?vQ{yj9)QWid^uV%D=Z&T z$$1D3k5_dl)`Xm`m7@ZnYJC%n(8hr;m>o-9d*xzS@dXoETS-S%DRBu#TUvm5CCY^} z&gcTKe3tr!Wy};6jVO@r59Q1>vR~eKa$AYplIG;TUInEhy3gEJpcFtTX`gXYvagrn z9!yI>@Kt5%dS@@WPnpHLfCYsppM{0&7gg|kRr32X6v?*474n#tMoX{G<$avo)=Scz zJVxaU4E5WmNfk(j=lA8Lpvq@^(gM`W06asywtXtz_;^8~q|s!s3}rhnpKdTgn3q?M zqJj!kl-DCHBnIZHzE8#v%Low}K|=Uh3K02jGEUx6bLlK?DGebOgdfwgP?pZnVgcGG z48bBz#sE|Fezf|(HEL9d42KiXNJ;ty(s+>k;gGS20IWyd!lhWW?E;i^kE46}R2f)eJl+iA281!BM52u z2pCOr;oH->2jB^s$TA56ACOprVkI9}mf#6|NHD(e`fEtY$Uu2rJ-QZ-p{TwY6>Yu9 zuj@c^K{=Xwhp>F>ZuBl*iInDP0&p*^bxZjpO2w|2_$#tr}i7K8d6l+k#V+I%+04SE2 z!4*8|5`K~N=V=zA7M>Y$rsL1*bG|?)tug_Z+y_Ikd`tN3BsAVOPGfxDY5T@;Cy&iI zZjk!kUtR{wS6t{qT7kwY=5H#JZERgW8mLX`Ut~xeqt$~u zMhMEfAg}!NS4iVa5S5;brojnJZrq9O7hZuCI}f34Y$>J*zpY0u$JEw6C>Yv=@Qz)u zWT|CNE6`kq#Oc=RJ4O?RH0iB!R>C@$0OY<*gkX`j1oo*5;Y0wsh36wEIt4+Yv2=lL zX$9KCflw1kOR%`WYHB6veXn}qOFau;I(Y%*TzevXC8=jjf%{NlkDGDu+u*E!-kn;U3)zm(Ut`B(!2~ zLJMYxm%%lx0QDWCG;GAe)26#Sp`Ybl^xS0OsP6de;wv3T=dbWN`#0JkEh z_W(<-DVAz0=mxKXjdXiSU!h7fvG%MpruoAz<&V8gdlAx?!ai*j4)JYpizDnU=J*r#G=K=5}{7wg;xdDLYd?ytEwMG#$Gg|`C2WE~5aER-NmDK&E zE`@o@w3_J|0LQLEC%u*M_Jb6k@h-#ZGjUerC zi!R38fC#mUz5<$RNt2Nu1R&uj(-UbEZi=O6p)5h^ccr=@d;tJ887#un0cemh0F~=U zDcFdZ-T*#>W&+RvQgvP9c%$u^8PV|B2Cx}#f1V5(-1u|;6*cpDe4b35Zw$PdGCpVK zwG5J*x1?JD0RQw!L_t(^#sHMAFUA0rG%}n~04Of6Ku%eF0zEwlEi7bm1Z`j3VS%5_ z4kNP#$^3$5)?P4kj)P-dAFRdVOQ8XfG{rnX0MhysS6HUVGEZ3nn{;|cs)d+tv2L}R zJ$+W%Fw$GsVm2*3^92>K3aM7I45@)-XdNtqs$k7+$A}6z1m~c(djcOG{|LuU7)E?Z zLx+~lB@`n^{{HO&D3T@eR7;S!z!JxYA`k6D?*BhNq&NTT1GJ5=gs!|T%TS0G+ji|q1l6xR(S zw_zOdl_T)a9l-3AemKUr!zsQQb7P9&u^12*QX`!>Waa4^U1^^m^$rJ$9cw0UABvctjG7gU^;0Wjx6h#6)O(onH zoqm1OGGs*KZ6(>CA!E>eo@Rc=Or7>Q-%-s3lE_rLGifID43g(#D*b0ZPvR(57pu1l z1$$I9E{Y5mp|zz<%ccQPMuV7HX#jMN>t^UGizTn+O80bva+f(b$H+l1D_ zA*>AcLD{J38pj96PAE@K&G@cBClJ&?C=wX{+s_80W`w3_BtupLk*+WT!xNvf^kA$k zjQ+^`zejjhDZ-L%r9G_0TiOkZ}z4ff|$q zbOOB7RZ5kWH8MOq2pV)+rj&gXGGxq|`^GYL?QcS--Jg-ZOxm-RF^o(d|00=sE(V!Q zZ}fRe5=R*WP<6vm4J2Cn&jX;PnaoqDuY*>{`M&bKmG@IzVAUDgdL9873)lEI8U?+W z72AM$@s*e#Ux0`N9Rj1XFi(~%4J*Z*_%1jkjj17XGDyHdx11K>2y`7=XyG-&%&!cV z3o2nj09piA(h97FIYR-U6D>f;kX%%Ej?wjH9%uelGrj9UC!v5(+~Ds4NGSk{iL6?I zWyp*MK-Cq75d0sO6c4`rJ9tE8!7VTWW6M_KqRTGARoCBu3opAGW6L)XfVZJ`a5*v? z7ovLV03sST!6Ts-eo;E)=Hy_*R4*>sJb_zwQF|BT=6y?X;f7Icn(D&h@nQ4~PNKAN z5Mh~hm=~S~ufRymApiw_GWVJ_Wy@^=pkeBF1v|cI8UVG)64YoAsUwtDU>j!w@RSRz zGOAw205n*9#_%&_oRb+`>2m;B-pK1PGMRn`08c$%sYoen zLt#@V^6Gn#Ro#b-iY~QKct~ay<|P#)ykr1z4Qmh>m5zd>U~FI1fSa}t;QB2CxMEE& zb}cN&bvqa0`CIqmfupN%-tulN>2Ji?U>};=2N0E*saD{ct1LiTdotaX0-pvznPEew zCl>%}V}SLYqX|CgGiYUD4@E5NnS3D#X5QDCw z8RtQQoa~dn9&s$?XDQ^;axY{Luowtm{lZAZPks(!xLwQbTsh8sla9UK2>+?cHwn^@De&D#}jC3!#V6 zBI>htjg1%9%CoPLjlL5HfRY^R8Sv2;vml8!y#qRk+e3W9`w-`N8g+aJnvj@uzbAvk zm@()lv1)vYqg#S;Ey3irQrt9-RS_b&l<&;ozcoB*RDE>>GJGlEKXoDACpjMS0oTUz zAs0-q>8l3? zjvNXbc0Tr3je_w4uHT*%`P91ruAwN7UT5K7NmvUvO(zbE%;Lbnds#hAz}dVQKg^mL zI*^Z|6%BI?`fwONeKE;l#}Y#A*SOw~P)N65-(8~3k5@$R(}QiBQ$zs=)R<5WmY@P5 zRLr7&f!l!YZ&8OimFW!NY%2?qN>P0GPD{y1O z5j*Q`QK*~Lrjw!6;jiMb7O5P|S;Bb~AE2{0r9 zxoE0xRu+t81@ihE=dr2WG!-J|aJGWk(?&XGf!Gup`O{Pv9dG!b8CfirMDWylOnrP} ze8^pNI)!h9%YEn&4hPVN`fSb4@{26Y1zqgP*Vncyfb84qQIJcUvGsT@l^2x;|H*=7 zyBEV#x&?$5T@OIXO94Y>!MO~jpA;2+QT&lqfkGWZ6u5z2D4BE7n?OCw}2jb^9{y z#7FjDpjMt$tfo^ZAK<_zRf{=KaSc`}gHZ4r2q=N4EY~!B=*Ql8MG7h6bC!K59eMZI z#Dz{uuiox>nRPqfrR@~i9&iwYgUDQOk3rpUPI|3!;)u3{FrJ!!hou?E6_xaRy%XTR zOK`rYbVG=nLL(e%@P*g`h^>+mviqSk^h# z-;%6RLvEHzwO3e%;hVid7yjYusQp!Et9nxRH2NvMc|t*Tk4+Y^VWPo`Y-B>mQ=Xz> ztKZX!Z6j~$7q?+u&k2Rhl-{929&nKT5T(9efi0%O%Sz_KBgx+8gCC*D{tW$c$POi7h1N%c93PhJQ{zkGr< zwnH9vw)cQ`e-pC-QMf%=(XW)5USs&|mT`Wo4bHo^pnD{NM2Gp|&dP??~%){bN5R4}9wS!bx4*R28 z&wnz;7t#fMfgtlYJ=5z3?>1Hlkio%xqmvm^b=0`arga<*&)sg!d0A!{8-Lyt01lDS z*+4qA72rhB#a4U6Ckc!UrDOvVLo(voazbR4oZM=|0mFO*iVCn;YD&#}%e?F`=X8C!;&Z{g3ol z6L*d}N#mM?zhMQ?t_5DI2cY`nyimH--&lp2`cKZDk!;26r(X-;ojuE`j_OS1wjZBQ z12_-@0xlP#_4V?M&_*>O#16>7>a86>Ws(39c$KG^tP-2_DsP&=JO5KiEa>fq9&J%S z?IJZ@(EuI4%hV%sB!O5*YPQ(K`GDA`OH``Z#p=`8&5|$Q;o0R^5nlYH(x$}9vOBLq zJbz+2Rf_4yG=T(&&Vl|-^~inAMh0mVsZDkLkJQ?;`Bvgb362XFTSVdBYb zCR0DU%nsAv+7I|;LSVP50r_#3R_k|SP07(4ep znBu(hsnsA^k@2O?zebF)(Pd>EQ2v{6CE0ER;%tmVU%d2XOzhH;!ELZ0~RGM)PIqT3Nzb|nBggT{;n^G;=LZ{Ft0W1??VIMN_xdirbv6^sIG zYCQcHZ}W+|CP!!@^MygndxAaKw1c^Z-q}NQl9K|P1fD~%*!yfT22|(ApM^X|gB`k| z(^p@v2?!D5*fyl=F(3K9xcL&I4;@OR4j{3x2iU8)tMMD`m+jF(00oAzXL)3gfg9F^ zby|M4N8Wo6gr<+CQyBTx5gV%h8%~(8UVqD!m!mkf6;1e*+0#ouUy+4=8-2gnPNfIO z%n!#K3r(~oH6<$VVq3!A>Q9t5H4E`--|J={+_JMtwFBS8P$MY{%ZFVjrTe&HUZ(-5*<(zy`6y3@9Wy!}shvYIEpS=L7#3ktTHXPJ}=w>D6S1 zpNy9mPUAnz)Ds8on%mv2dVrd(p^#R$H}QkfYV<%3+w1(&-m|Nh@k*!-$~Gk8U$gU- zd942i_oUK0YNj^A%u_ixwcOg$b`rneU!5lspZJH0lG)k8#67=spzOK0{` z4nS!?Y1jrfc^E!)1DhV>y^xott4IQQ$Okep91Pv!|2(Mb4pakj=f6 zZ+LLIn863eI6_PtX;7(~#n+qb>_Eq!F$F@$HM1I`v8Wbnx{B@Zg$_ZFZj6uAjNPTB z4wtHd((Q-YUtM4o$=kGmz_Htvuk-@!j~|i`fMUaQ02TWKZ)Fe-*bxeYrMl+;Gk}nWfBwjK~(N#^OE3`Z-tgK>9OI zgl=VIxH*=qx^ZE6ztr5NuFdEXhRt?HhAvpY?oI;f!ua*#1r$FFbqS=yJ!hnfx{SH=(g@jKWNT$g5EP5;jfh-r-bnZ+69UJ|vTC8bO|goP+zyN0CgBL> zCpD3dc)vtZpYHf-H2~-3szLzj_pR6L2lsm9vdF@-_?P9>8!>U7J>jU0zz4*^^rCr0 zN0o7U=BM64;VdCUNRKX{ZssghQ}Mu+kuSwwzd*Z819i=C9zl_i)iJ!!XNcG+!s5{; zR0;K9z|Kvm^_(TMtoKw9den@Cb_#uS6}js_NZlw__vqdKq+R1REXR>v&kva6?7}k5 zQ>WccSgI2PE8B>5(=477C!dT{7dQ<&K7X5P`==vnWF##+-{Cw?>a1>|xy&py2uK)| z{y&jf6lh5KASS&OXQ+i}$zuVERZLrP9zGu-d^|f7KejqPmuR%@Z>^LGK)$gIn0~QT zyTcO8ow*77BwgV7n<_*3;F(B0BkKh{?6X09b02~40>!IQ13V9faM?@Yy{?8^lMSWy z0GjaI)E)1`CSf?~!_p{s+|>M|q`RCj%t3qGFX1$-&C2WeI?|@eK&>&Ewt;bEnvjSX z*%P$nk{`+3Bv^U47wNT*X340uxUL!%KeBdq$EMC+dLFedjiEd%28_;$+CiR(wedQ~ z6J*cLiJFmEI`U>r&3W6=R-Ls^RLpjlyC*_kn-UsO`4ZzLvh3DBd|y7la{K{FqQlYQ z;d3*X2Wdrp##V-Oq*5)UB-O>uzSb||?)%Cjir#CG0NbBU2xC81ME>s?n3$pXoV;q`WG^tjvX^xmeyMfvIlkTC&fhSFGRNMcPprA6VL{7iMxWi{||E;frDR`SQCspaCOULQC zZoyr|EhjgV;l%?0v7SKpsh>qn(5h6Dj)1zOm29D*k4Wnq4E#T_B0slCdVX+`7&MU{ zmHk7c@T=;)A=)2J6j_;u#&>Wr{BFWi3ctd-JO7u7he$wbakt(u#AIRt~4l zNeG0n!Kg`e{1*t`O65@UAnHsu!yMLa?&JTIw{%!jLYGC`pO%`4Za(OPc=As;0iK+| z!(bq+?nVvdT%|k8bus^w>s^dayr(Rru?~ZjvRc*f6`xqzhCvRky0i>lTBu+1#p!)O z!os?$zjfS!up%>mrl6{sF8|DrSW;6lyvd}uMH0F_q5{-J5wuzP<|)xL#vGp-SQ-nk zHTwx^tXc@Qn;4Y?2T7!kR;uSOM47d}EM%drtElRKBv4G|*{oMRO=Uj#%JVuCaV+7d zHulJ*eWkvCn*t&!q9NC-`Grn!wz)>%uWeP7p}j`C3^`8>-^zl?#on8&Crll_s;^!F zqfTQG9!o^!_1;S*x?P+dlo7lQ8e?VK*Y3{yyIno;-bp&uDh_|xcImiCEhWH{=Xx^z zbKQdSIBTra2*NqQ*^OOwP2k1L0t{R3h5QBN*S&IJiYCkn(rT2wSts`CLFeNnTH8v4xft_SCFG<+P-nqcH0l2BB7$W`|3bmOut$h@ovK3s&p0N5yieqF7-5r_UIs zt$xIG0oR8{)U8+;(R1|#*xrI2IK&Bm!v##-77Z{{sx?hcz3T9w@9}q zL@PUSJ+uCbU%6D*>??|6Iz*#u>PYwz6qv~%XI)@~j`gR|J97%neE?5+yf7_@DZ4k7 z^-7!1<@2*0Fm(Uy;`U8PWP0uS$v_UCBxqf8_+dw5p5jWiTa~+*W&!C|w8h zKR8RdXxpZBV7{f*hGofu5|@m#VxISK{lrhf)5YasRyUpHTC&&a5h`XT3XyeG|JySz zOv9vzSwMH}Rt4}t*nXEuJ}zQ1z$p0KFo%kNQ96&|$}$(*L)+S&P7bAe-N&dfzkd@b z^rKcWS9Zdxq{>Ol$&dNwR&t0Y`W0T-hmp~JogYbJe#fY)k4`rZfOA_y&x9!r^rp7rA%>BsXY9nlv=eD3De#^V&Ru`G}4e!7#SjY>_4Tck8b6z^I#6WH-f+uk3k^0@C0Oq>aE z96Ilnh3M+19OaE1-^eLZYSQrWzdzYAT&JZrg>hFtnXwc~)iX}KO|`x!Qwl?ZEd9nm z1st_Fd849~266~3o`=E`1cRTgw!G&wrrqYIWH&I0TiTXHxUXpfLaa;1-EyA*o!kxL zHR7u|E`gx~<+r!!6XF-mACFMdM4_;c!hM(wxXMlqrP@-3hIOPAOqEt*5&0VXcXO>Q zm}n!^_Cwk;7P2rVU@K;U<&7gSF@`zdT~fhiN1HEgw7e5mCr1y^VN5*FtL?yH$&Zkq zoo$>Xf*Q)?6Df}~W@OtI)pZm#ypJcTc!}EuWVP({$of$G@)MhV#EvZY&|J$;m^X14J^DfK z&OX5PQTO!nS7YA-;J?)or-}L-XqH^}W~w~&`z;=LG%JXnt=|{;Wl=`&vxQug{YzO((a7U!OtZ#MD!q% zqxxL(8MfYNVnayMH42SfoX4Tj!U<$yF87N}-Q-3ahIeo~uhv5GjyulCtis^l@|OtW zlMTouY`kf`PrJH3Wj{kGUE-pbosHa)C?f0AN_@>x6edgfbMO?GPjX|4$}8%OqhCy& zNF0Q^;=}qg^?W2{B>h4UpTl#|6lV#M9*8%~vV}DJcZ_Qe>mxT%o)qa15HvR4z=13p z1p)ZRff(LTqCV;S;zK*b6uT1~c0-|G^c+n;tc;pGFB{qoDzQJkrWu}-MQPm}`Xk=} z^-|KN5yt5Zb&-?`R9Gt7>RA?eK$Ok)Gu-dznx>GupLiX4gqScn)4lqb>2V(Z_%sK5 zUjD~ZLT;1{d%A&BH9W7)-$926nuD>=7)$$)+HbudVloShgBg78Rq=YB=v11=IUGpa z1oh*8$}i?bB1LJ>%E!-z);{|tII4Z$@qavu+A-asfU=GMn}3`Gtp`#`BT-$6lS;8o z>p@hW?bj4mVSA+J;r`FAU|(^L`rweujkRAMy*J|)q76ahhKUw7a4N{v7%OH2bFA62 zmTRRs!>V}`z8>%9(CgKdHNr)kvw5X~V*NXY%+7QA`r}rNg<(4{Ejg^N_^pEvIiJ33 z8Gs5Fa1g$LR)7?6S16~fij7Rd#WtEE$3qg_pf6Qo*q?dJB-F&vIgX?dN7{TPBk|ds z5Jk0|?1#~jImu3!>>JA{#o!eQK(_%*51=n$KQ2sQ-!q^8F*TQ)#?QkL&m{rZ(CE=7 zQlg9C%1mRo3C8WQWO^noyN0IN(hQ0|Ie%{dP=#=95V>hfQnWWA>YA1W^in){#>V@f zZFi$TP&lI|RdK)Kq`|7aUbhPVn|qo0y>m0XSgrcSmmnU=CnR9WqHX87E`q#;nsy}QYS9tKCS~14y%blpPKyKf_1zMbf zL#8FgV)_cXme7}voQ2e`M%88TBsw^S&Qdy5Mqp@*jt+Tb#mv3ZGk;V_pZV2uJ=u9Z zkoz^Rx;n__wL%_M(W~hMLXFW86M%x+6r-TID;n+6d%J;OE~nx`iw+=7(cN8uN;fcl zxj4FRll}&&<=|1+Dbq^$T!kt?(06B$cpEGs7;y;rOa;K zM#boaHtyC9)*pv8{`dTDpp01JhE2^y1Bs1qn;*W9DyurM3jNw8G0(Ap?HnW`hP)0} zJ8>pEkOaonFNfO%Ytp!^TRU$Ch=w=K^Gu=j*cXIfb_~&T)ejHoc8yNz*`E3!5~|o! zYlk8h?l`AdyWKlz-fvCx+7vW_wH^o$1u$g=B*aKs6ODkdBi;eCWim z0@_jjUWpAf#B8V~d+q(=v-&01l7qOSqw@Hx+?f`tM4=#t#xioW@E_w7LY@bnr37Z{ zAbRFdS5Xd5Q2ybct}iud#*H3NNrtnI6syeEEW>Se^|P`A>k2aCk3@?7)Q< zX2TxQdUDvI?F(Mp_aQH6tLy^w#2sWF&|bzIl!@HzPCk>rBcKI2b^$1^GC$gS(V>-L zL(fXeA*zfCkvcZu-(%ZtGlIb+-p6|80Vd>OZVhc8>YkZJZ~F$1?-7j#bvgdbc)Q@b zyQy+nPPT=eUm{V3S8hL7;h{OG_f>PzjnG!n-)2w$SIydz0T*`! zzpzKj8v&9l>zN%we!@e~365m@ zf=cC<+vKesXqs7~0Eq-Qrn~re^r!`1FLL!IB>2`)OzUzot&xnU^3+P~sMzG~HC(~; z*K2UOiJnU4hj(A994&qSfD~ zdFPc*c6YjC4@~@{M9_HjxDH-h(jdcRx~=6K5Ub06vkEq@7LSY5$eb)&Zyy57B#(1Y3Af9{1*_v-c~u9d|GE#vqZy9B5_Bdx0=_%J zxPl!$^6Y^prm~e+(A8pHcqQB7WzNN5VHN}q@V&^1ck#^rMY_;hT(d;>=w_wo`iTJLgp;|xXN%4p*(W$g(ni_?3I z&TZyn**FvnnDGkVXW|s_l4PY96(@DS(gNoTW5Udob*zMf;;t$``7OuBH& zP~Tc~knxJ!m*@;nB>D}Z6_&q>{&|TW#WdS)W@ZDfueoc&Cmk8&Js%1EIu(14w*7x= z#qgMZT9fFeYH*-piU)`zRliq9_-&hyjhKTM=M*`l1bU)8?+H5pax30g*qm-~Qvi%< zH*gAl>HrnK3^c!s;N_Q~>H29VbUaZLx{GGt@=yKtT1PJ&-C>iUg6P=HhdD@it4;*$ z%$^`!d@r%fX(|&dTNKbO&Mm9MDk$4|C4eDOlmI{bvh{n&tI~&cb5hAqe;IlB(Qsb? zuKZl)Mjl#m^?uBDnHq z_m|ix-;YFE?#dQ!)Cq6So~3_^|C#4YQ9Q`v+JQs#Z~0v@xhgK?QeEpYL1C}z`!6}s zYhQ%s=AXmj2bno`35?dsBR95q8pzd(4?mG*08Nz9D4aYEOS}o!0fb%uvWq#3D-1gvc0P{@ zr;|zK&6k7j?u#CFo_JWEP92!~&9iGT%Q0tY&fv=fal1ia5yH_$_oqRQLe@eqnAZY; zdnE(yai9AhcJHQRJ<v1yDU4v&xsDBwrOq)eUIT<1y&fN-!Ups>Sxo#cS8 zVf_O8ec1v2U1@gR^4RmQitQ%~IX8-E5S|&WjqOyY9Pl*uO4YqQc;<^r{MbopxH=zR zR}BK!lqBHCH}Q2{ZAmT7)?ZWm?0`cyHh+)4{kI_gCA5>pVh^Xy^o*m?s;Oh zhhT-v9^PSvGnTo%``=5)*5P{Wz%f=gSxdh}k}TuYfdNN~ot%eQW^1IRs%X7ph{Xw-UVa`I7k;N|9wx?L9}tY0|JS=6&VE~xg$|gb zrMVYaA+9uhsz)a$Ls1`Q;Gg~13NEfV!Y z)wGmI(ngL{bnz!rE7}_UqiFv>fj2kFy5{6c+OoXEc}CP^&`ncs7+HO_!n?mm;|KwB zaH72nCN0!Qha5f9+3mHuYmAN=31{Y|oao%zLa-5e>pMTA(AF5073g2Mb=a0MM9o-!TLTiQ_(ZRz;yGD&9_ zm&az$Kw7@pr95L#-2*|b=B@@-rK%2^iu-({)0WmzIU|NeTz!Q+kI1v@F^^Gj1vH2F zPH&K!dHN=8OGH2Kkiq>w{L+LdaIMVKYpNm|-!Gqm^*rqM530)ooj$t?JB^+Bb=;wa zY=4YwkB|;KB{~Yf6Sb#6sDIv!D;!YaFgfp$`budvj#-dW<+(=n@ZRu8WsIP1_;-q0 zK;7$_n0a7}xHCbU3B@b5aw=6}#0`JHlxpTJm=7vwdopwJG`Qt2=OZliaaTMVkv_Ek z6v+A6(;-S5z95a;C5%C>N*6_mbRPoBvc)=fgxO_H@YAa?l=*`g=#YJ?(=5&e%G&g0 z7#u)9c+9d;PBzgVnQI!!HjYox6i~TOBB;8-u_hHtr?C=w?6Qc4sp>1nSKbo83JBuFrWXEw zv50?+H9aKY`Sg`0zxt7I z{*5!Eqf-&PNoIuZfw7(IG|iWQ4N-@sQkSE?i!CJ#;OYON5eygxC7p{pudW|WeB3~u z5S!^C;4tUK~XO?fTFq+TRgr!n#tKtcyUFlTdjVZYz%#4o!}<0$S&rp1*)d+rW0 zfL*=BEJ!X6U`I=5n^1T3`X;@$E2B;VGWFe3_jLiFakUuxH3^FfG2CGq;)q$e0Q>|k zL>Ig)F@>^cSZ$JXa?+J(b~ak5kr5=?{Vt&%hS%gar>U8N}m_QS&c z(Lub)mVOI1vJp(sluyZ+qbJGEyHz##oFG(Q5)g*lmpT7D}YuRs86+nyif(2RAXh%Qt zkeqGD*{VDMZMnke-fvk!W&TxHuos=r%rEb2;xFB~owtvyu2Yp@5lvw+{P{Nu*hF_| zAdaOCs6gAGgbqJ5J?DZJV!&|^B!hT3k2}QxhmhJbJn9K!*N~snS8~)ha)3nFzt_H8 zz>gbat!@PW?g4me#B#r|*frL;ppP^xHs-cc;4`kWbZZy5OH0NmAA?8+Bt;0#+)6SDqVbnX6J>2Iu7p2@g zU@@<4lRx!+A8^7tm{RJXAf1lqIsiIdfFE1LoM$0V$1#_)?Fk6%?olA<&qHXp;q6a8 zs=e;FjbhjZ8UR-gZFu7i7urQS;66Z)VX&s|#_wcm-qJg!2AE=fPkLH^R|3~)k}3_s z>nS&3sd$66O)VH}4SyA|rPssmgnwikZKKw=>ZDX!{*z39 zsRwWScOcSyBqHzXKbw^4Awutho()DV6Uwjz3oD$PsE3j%lmie_>!lMfJ00+bOpU#?Mu3Fm<w5#Ucxxb=)9ldTjB0zJ`G~_W_O-U)3eAe)c7wO(WCh>o-aNnz2WT*WwkV72+xv z6=VD|l_FkbD#kyJV^TBN(!wlCFZ@wLAiWkq_$7QB&wlTxjnhsfqSQ1=N9ghEAjLz4 zZ#J7uxb)J@6)QC{vE$xgy$VHlW13npXDU6QA@SqRBLVOK2*7!mv!q4z91iYX%E|Q| z`Jj?)?0^EHy~5p!A`v7yYDA!=W$D=1n>Q6SW&M>q`mp5}TQbd!^zw&Asj#0H^b2+EQ!|PuhQ39)C$c*YJ>ubIMis}gce&go9713rryDmbAp>x+K{ak1V zdsK{5DaIWa$T_cNGR6_SHM*Zz&$3=ImG}ZmwImOH~ zyUJ~u$7W1QGX&?`^l|0vr^$2}qRi~6D>i~`sHU;%YM8RPlXxNM-IDf#$J00Fjo^Z> zL{m#(`FY??E99;kzsu8599{%mVC|v9D`GctLN(s2YrkE&x*XAaj{)@BITt9H1AWQ+ z@Qw`7>UMYg2Zm%5BRBxFrSF6+EZ-?pJ1?26!cm#ch{8m#ozSZd&B%Y-zmEIGt2<+) z!_TPOP>Xf}52^Vqjeg{94*F)$ zfyyrQ#&9+>BG-GlPQj_bOP{P zRm=%6z(1Z9P+q5Nb|A1b4kCW+<9gELRt+oTX6}XGKk`2B!Dv3p8Le>}q*@8R`rN$v z5O*>ojKWF1-@xplU+5KXAdPwP&ns_}7!oXP9Ji`1$9UD%4AWDMGMf&jXGfb)4W zTM#moSXuWwXrK>mtNAXOQC9CXvxrq-o_{TH@d9w(Z?5gY0}^ie&z{r8_LOnb&t=&- znGT0Q4RO#5#KR=T=&iZUPtxoEU4kMkJlm*nCfCac4%gluBsX8J{qnvL^xv4bzQ@x? z-55nLRK|I_VkEfA!R4iaX-&B&oDQsWpZzxq-S6cdR^vFd^h3Y;u)kky#Vo0Diu z!sjbLKRO#72I&lMbGvMnGGuYQZRQlzYX zt+_alOOBJ4Ix2*W5!{jXzpe`OUy%vhXr|jJpnD?Gbj$&n_%zWD5h%vc#s=k!CF4Dw zSAS=E_a6RPsg1c<($BQ@E#v;O+>|QfA|+*(qx$JnRr2NAID^?H+=v!kuLVLIkF+E# ztID9dQ3|A9D{pg2JuHX06KWlfdq_G$0jZ4(>GhuK@LT$}vk8ml`-NP@-K_pbTWGMz zPcPhq#-kqb;|DD>C@Wzu?DN7q%hs;Oy7s+LP8Nk{t5Q;@#<&e#As+tkX2+wj>EO zn+|ZVTkKK{rp=rERdA5k_0(S>M%#%{YTSK4S%3Q4HhCPe7KuS$<&R$uEc$;q*?iIG8Y;%eM)nVv5;_AYx+ z^%RnO{XH$Ou|tKuUTvTs><8NqQ0X7pKX4)SLbQ(cwtQ$YPeS=?A`9raOF4+2O6> zNBo5c2RgX8$j6F1!Ld1+gU5r;Ra`sR@0$;Zh3vdqiyNYtBe*dJO4~?4UrnLr=-!KF zqd^8qU>UPpKpCB@_F^W}Zbhu!D)s8G-QrcX+-OypHGn4-ucIT^+pkt)R(Gu5eP6#P zZbPgqJ8!C)Lqqfr_Q=$2080sO@gQTw_#F&D51uK!F{}j?=|k zOw2^MGmEuQa#1^98SOJbv9fvKeMZbQnA?dIWD3}DS-CiT6mSt9QQ6e43+RzTqg>?# zKsFXAnr)oe69;i_#A^z`eQvZwFkMJEubD1(#`tkBjZXH*6+n4&m}Jh2cau6F#xFol z+kX$yiZF06Cd4m+z7p7zd1=e>Tbkh!p;&r%j0C4_m{{dQozn<1$Z2MHGUGhmcAdnj z&6C0NeMm~#&Z&bvP++MYoUwuq5#Q#S&&|!D2hoT;x|6RJ^5f*S^PQP*##s1ixhnt~ z4ZyfZ!H1;IsP%*4ObQCwuYXc^wbtEBd`I%g1#8WFblf+_bKq$8SIzBIf54U!Dv5g+ zjI;1sS=muxKPQ)zg5h2CE^ahdz_&&L`aew-kIjPwz)>M2w3P1{A2q@@zNve!1>#U3 zFoVG=^PB_kkN0l0tf&(a>uXrXeqoqvgUpPZ9p}Wa_PjP!_m2ZkuGQ1S9v=9Sd%uKX z_f7e|xz+L!Ce{H2sq%NKZHO7jE`#N}50ts2?=3OK2bIUh8T;ExqC`eNa-tS`a{%8N z!3Z})NXpu!NZ4iOCX!!itAu;KpE&%ISm4)bpee_24vQ*2bcWaqzVYH+fvhKia_z%w zfd=YHpeqe=%LL_Sb;hR|xRC+{NQuQ}4(C|wQ-hW-pVOR9>XLEL@4X^1eq^kxol$wbbU;0p99{!I1OwG_u z-+50DLgInlq`Q#&&M?;LYdYle@_W==U&4gIAWP7H8{C(AQBNbuCMYnT>BE%j*%$ zs9ho*Jp!BI4N)C^T^7!Gn~JJ#ta>#6qb`3l{Nc9qg(5XfGc+Gu_-u9k$`5Kt%jY3N z=s=5gIz0GOWF`)Y$PZ@)n7by|!Wq#gYT6Hsw(9|Y#M-ZFlGs$6KMM_}EkSg_LNdTh zGfFleKAT@Gv{u)42zS}iWUL8GNco{;jgB>bW)cXK!k4Wzi01d_Q3Huaa@lXU&+7lW zE|myh69AiOGk8)EnI%`%1pDP+bTCjem@I4^1Ca+ZC{7DTCfu|IE6)0h=%HR>6@Vhe z1(l_@F?NddiZc8+uIhpO&>L?C`5Jl)=}OMAquzG^^^|{qr0q~oGdJ2%*CeT^9d1(t ze#WomQ!5JzzUJY3c(ocy`2De;i~>-fGrj*JtPYnNL5o&?v~&lqB;=&=Gd+(hEZXU) znG}=4A2ylsp|LlL80Sfw6UAsAJ|Vk`qOk(##iz0#sN0=&R1tuDxUGigxCswTf7^ji z{Hg986;_Nu`!wi0+b-q5gkO3e%6ciz;L@od<7Ty}cYk*#rSfI?y49rD0Jaz|6wc;{ zzn_U|$Xt)PU3VxLSxazE=kAjZ>|EuYGY+YbH6Z9BlFYveI|`RU`5W?e_a z&OX^$ zRlNC{0n(fIGt>H0P!#`?koqC*vJ(t6(6WDtFhm{*BL>$|_^C=k#8zQjE({z<_myU{ z#m_SD{&>nJHd+08N4yqF$Q+Iox@3@#j;>&H)^RVWJ&&FPS}pYbD_bKY$06W*y3#&8E%etP6c*j7*r10SKZ&JjHw6_C#LR+h zY&8B_g9^^U`Z&s~>Q25aXj#YgA2X<6=@S_evxH2 zeNeKS1sS-Z7yzxnTq0;|N%kIqG$EKmm)YUvnYIE-sB8U`p0mjs5613UeZ|N{>rhfO z;jg=4k*T}Gt-3cjKP&=g?N*$@N0aZ>>GYIAR8cdJJy$=QumWC;8LvisqOzX@sn)6Z z@WaPvIr)jvJR^VKc|FfK?SSATZuqPD3etieC~5Nvd_EmV864J5gbPP_Yl^8mU=HWk zg*CXjmkeSiu)(jb&HiYECr(jz+WZ`=rAEez=zj`%98?^0at#aFG61 zgjPtNp*RMj0bApLfw|Q1Hn>ZQ!6_0%U}LnF~D1Ixq(vnNxb#OtJu0_0|D@; z>I9Kq;0HhW3=TO%@Q5uyTWcd?!h?~Mnt+#7)}#XfpO+F+d3rlpyJ8c<^1={|W{uagtw2$T*mG`A_)# z&%eRbPu+_*UV9cFzW*A2^ue3>>4)#&6D}XU?^diDAIARO+i~{X4X9ht3;*O|7`a5l zDy0X`wfhNv%asH+PFewz#4#8})?>x#d+^d9fio}s0*4;`5KsIDIP~=I6$6wwKmkCB z1Dpr8+{w1Dx@-gh$vjaEXcs*WwgsD)NS6_Y-&p-PJUU=?NymIjgy!XaS z_~5OV@yz27;KBRu#Pb)Q!K#T#wDb&PhHEG^bA4f*-Ur8;J!(pPJ^8L_@(P$HjH(Z& zC$=oXx-$$pz;Dm}w*dHeM}kZPK%;2@D5lD-;S4PR zN+9$U0L}=lMP_vmKK=ApxX3zm?%XNdb?0q(;;~1tYv*<~8N$Zh2l2{}e~Ggf- zX}tgTEBKHM@S~63$0tAi1P?s+D3Y=Y;T4jMnQjr#*oDH15_o>ab{HhDRI|YtCyZle z!Z0kO8sV8-ftK-2s2f~~p&ci%{`A9$XxyLx&^&y>H6V zHkocn2Y%lJ;J0=)(3@`G6#xpzTrK^|`@a(Crf*MA*V#XN{eNWt9RQS}mr9XHY^s#W zzXyQ2PLP;Z%m}MPR!uK{``b@(!wu)i_?BVa+SR!3#I?BjrW+}Nuf@LO=kVq)F5%9% zeh<4GGQik;^!Ij<%{`BkM-QN?tQhHJejz~tNQjF;L17WXqvH?|6pFy$P-JFiVb9K8 z*tBsIe)5x_DTOC}ziK+HzsO_=1ivY}8ZP`N?K=lRW`|;cOktX2j)cNo!XJMBYy9Zr z_wn+}&*IrOd>`+9@D3h&^kD^lr*6CniP=Rkoa2OfzVXm^rUXvyfo;`p1%MI< zXcRw+*~ufA7hQ{kH$8|a-uW?p@ViU6{ly>Pi64E2y$^iyjRe+x6iEQkHz4$H0C0L6 z;P(KiwJQPSYM?jWz6$^pfYI5N`{ei2P2vi5cIEc;^yzlxIsaAr?*gDqfv*EVEg))@ zifX&o0id)2dK4=LIExZk08k|GU3cAvojbSU=#c|>@cw&n>n%5v5uU?s4?cnSfA=+R ze)(6h$yyATs9YSs_7HydlON*4ci+V8FTaG5;bA0``Bhg{pkrYVBI1$|8JkETj73dt zJ)V602|V}gbNKx8ON#wzm7aF=mudr~{htRwT_=bvB_>GzRHV3co6C$aUtPxax88y^ zn>XX$C!WHw^EaWXdlBjvE=J#qNi_D4B1&e2SuhN%kQ~fOSO~kS{m>+>gg!ygG;tWS z6MEqoQ;N4f`7s{7_yXSj_!I0s%@_T|8#r_Eci)T!76v%iJ4peckAKKFoge~$y0O6G zS-%IsZ%rz$4z$Fi!d?ydboRdu0IxJ%d!eq)aQgQ2^#4iwR{>D>4H_wL(&=HS5y1Of z0Q@TkC;;eLq5yE_6ay3heE8w}aq#eNoIG(9@4o#y_U+w`8*jW3Prm#X-u(1S-2BR? zn3p~Pr^sAv*|Gu8Kle0#^UGflB+sM1sSOFqsaP^LhNcb@56=KZCTGBh>S_I^Evhcd zpVVq;-d9ch@+ZJIRsX+_1EhWag?tD}wsnD#T5s_MJ;k31gnN!&i_nA=H1`c5t+)yv zp)n|IXh*}q7)B;{qG|DR^se25u%ZswW-iA3vfXMNuqHtOaFi0bAGXnDxa;YQ_`$D! zgExQl310i@@9_TTz?yR}{Z$;GrBAYI1N8O_Rsg6Agq{w7B7tSf@$Wl9z6Bzk{ci-o zzh_qiwJX!6Z%(+-h#JYe--b&^(LYsqhV|B zf~3@R+(d%XIWPnVU&`OuWVrYSbitVYMUqYbF3?rugxDWu8DY3pE3P;m=0|7o= zn*a!Yz@NSZe$VB;Gk2+P4VXKJKr_z`b3KExZ0BLLj!vL=^)|GRO`>XGH3}B4LSXG$ z%q`juy~I_}OIoK5gGpG7*-;f3+kFtve)uuo{Q1xE5y9``FFr@<(z7s#ly8D)hr$T} zj;`ML4FKvoL39#WNed(M?*VYi{uKaJ`}n;7lK?2|(`RS?mrTIy3Q)Te=%#N^Pye5^ z|1JQ^R9Mp)pw>x$+Xkp_Fk1_NQxaI(01KK134ovC?z?Zp#!aiSdDB|lLpi)*<0Njm z{dO!IS&pZF@F{M2?YFQb19Xke$D)BA{NkrS!S8y{@^_OtwT&^0nXoYJ3jyNb6ooBlD3IUh@bo;&HI9b3K+jqog!Dmg#V;{=K!ef{T1me z+cG}zYg}T&pT7JWzi0a1v-e=OM}z`F3+Et&q!nY;?&B!!97cK97^-@f5dhaBuX7cA zE7!oPWC!%(mk|V4t6^})aRZnWU4cll$5s0d;rS0g!Vf+JPCou4IOmQ)6W)Uv(VdtP zR7DA#jOFXM!`nX;dKx_zII=$RsFcED^1W3Pf}bp9#%LV?%C}ghKpGmDC;&7uopqJ@ z09nwbaH|3?#tKCMP#@?1CoPlb`5T+6NZ*BNpG%%aC)@rX07z3TklSK;erGGl_E>Ft=6}Pq=hNn!$_J(i0LnaoGFRlc z09Xb;A3s$db&gk@t`-2b4A4L#6PRYKq7{r`ZcI=#uz(zPwS2KHHOLq8yT8&-4teKbCH~yqXj?~W&wcg+~RM5AUnGl1uWpX z0s#3He`VtN|DGw(oMxE>QeFF&&aSNFI{SOt6e7}rx=+u0YRz6^4vPp zJ+qjstF$T0FO+ANO8-A#lCRTDcTEM90w_}eJ$;{;4!m^$KHaWN|C?j^{xbPq{#_H0 z`?h?P{B?dYUj_W6+!Pj-!`D|n(?BPyhGl9UuQCFnj8!)v@EIBy&_U~SzacD4%vnBZ z#_~}l0-$RS=110IUT_I2+WPU^-~Swc{`_|;`r?m&{w@CehhO2V%YVe5{_rXO%zF0| zs-&A<{3Wb2hTxvwhy_blAikg$dG-Csu3rKRj|@13l_EH;8L_zysNy-xn!6C5o{hU7 zdQ1@+@)_1=AvHp9w8mn34cx*eMMaWyTze#~N+CoICO z$ZCx3J&hY4e+7qcz8~vO-jB_H$oHB5A&FXFe3oY@=C?%nyv640~7!>VIeXW zU?cl8B={K`6ZnkD0?k;kSlDFNXvF}<3mcoW0GhGTnZeX_&NmEDSJ84+fo7#)LC?u4 zQDb4V31C+Px_{P$L4E^5{{R4W!1njR?eE#u&Ue*o@R`JPz>p))sGj*MOpvC)XzCap zxcs{|9R#nIK0WQqePYuAZhHFkfGW;B#rr+Q-p%T zGWht&XBrGunG@5h6DM}2tVzW+iOOwoXlnzXE!Z{gk&|u!?AbOH>1#!YbhsUJm=H z7R-<9hiPOV^dpC07SjvkAOfIID#q4s)&iguHp&VkN?rqcT_Z9+L-Ddk1Vxb-Qs}1I zV^lbTw82aRKpg{=Lai#hD$p$4T$i>m9ROa*>U4HBz`N4^SpXFKXTVQ)j(>C>u`AD| zev?lCRFzlzj5>hR0pB-y!8BouI>tC1Q2rg84p=&NcD3{VqigBTp<|~1%*WQ{ci%K+ z{F|m6An!}^C5udNx+y6v?|}fAF97HlMAboO%QC0R9m}8k6sDdrx9NcOWa>6kn6NBL z^nwc9H=4z=IiCzrz6w`>8BuLiJFN(-S%y=Oy@wO`zlBo|yn}O({s0%A`WWY*_yjjy z{4FlL@LSyW&L6Pl?oTi~Wf5%Ss%z|5R2K=IO;2B#9+lX4sifDyNWDiV2n_&@Bjk&%l7@gPz7cYP4 ziM$}=6JV3}J_{3q8>NT7YH!g>5CK6Q1JnW~_e}v{QcAWe*y7=}R`@M2Off)_zzWE& zRynQ!yQ|rB0KA(0Bj)$_(x-#p^!>W@e{?>HlT!d8z#`Adr2;?#iU6Qu#HzCYeW3bR zZ8~7d_Vjb=(x#ibziD>m@nX}DztVL31;8`1i@ARFck|Dfd=yKU519l#0XqRd-BKG8 zQ~WmosM-O!E&wRKzzP7R+!>m|Om)!7=Np)2G?Pww3IJV;F*{}fX2i6@HlYrY#S0Kq z)Q-gBF2ogeBC)I+$<;$hYg~oYwyntQJBFyX-BeJ$uuG^%_sZ=k?HEJP%Doucem&38 z1Ot~8%<{~j46Z?OQ$JjS6VSYP9FJdoMX^6&e!}#mdW%ULpa9?3Urqs`+IMwa_)pn) z41izb(xoq_WszaMj){n60bgW8r>7P>4XX6IwU;0lzJ1$rl! z!ZWQBt{FA(sayuT;tiM^+lhIh@VCdOoY(#vLonMN}xFU(k|W~gCDQV>I5`?q3{87QryDpcLM|fvST|WUzs>IV<(Saz_RzX}XC~B}zd} z-)2a~A`;k00MLs7ScJLJO_&v3!@7}!`QG6q6CrSR^@pvKFRUDWFv~dt#?FbV$5`W0 z4^2=jjFT2)UP3!s#}6RBY%%JGccFjF4RB0phn`CsOx@BDkXn!GuBDjo6^XJ1{doH2 zx4>$x+5lDE=DL91*AfaN%uu&eFpvja9UJ~L_P+uE<&T?c%%GYljF}>nnB*L^ zH&kHNU?(<>bz;Y=9-P=Yj-xwQV*C1Wj4oS2>b?R=l+iXU6jmPLyv8Q@`USEOX<#M* zXe5%t6y^ecH0kJ&$a}^7Snvb@b)6u>05uu{CIL{|01JvL72ruhmi8PSGtx=m|49Ix zUa9_HrUNmtbTSOx@27*?KV#|qojQK%H{VF$DboSQl{S6<^yB{>n|@9m@aar<%$4cW z?aFiL?C;&%^lPckpDXg@U$yCZuiKX1VY!Bq#=J&8_j&th0Z^Q+fogt{_Ghj06$WUi zhQ!HmI2jX6MPi^w#%Kn8`7pYv2lUbOTr(X~V zf5&{?1rmOzZGScU_K_v3*F@51r3=P;zD=hIg#B;} zh(Jza0G4%EVCzU7j!gFA=%xWo43y)UI}hQjM9Uf$P($GA^$U?QTh?g}tAq!OTSF)`wgd%};ZGgtcvlIi=NnouU zWMxxJ7Hk4wp0ppaa8IvX|Em2f066`a=^&>Az$?$8OPiiPJx!OMT}U}66?FNMy8x(|^E3yNMz$x* zoGD4K%d5h|O8EJPXhU5LS>DvJOksG21UWjeQz4E_u*6WI^Lu3={7{GC)e;%oa2ct-~-0Nm_X$9(nd<1%QHaUvfp}{rg(T z&E+ZPr!)Tjp9er;ecGI0W{GDYP5zSLcZvIc$4uOL=042x3PwkNAJ$AxV9nYU7$S39 zz4I_ew;o1#VKZFgiec%OhUD5I_-D5wFfta)`WvuiX$OvP8Nw?Mp2o#{k7HtS74A8^ z4L^PTPJHy-89Z`fJGL)x$M`@y77q<0CMFKcm#sp8uRo0S^kHTs@qR{1R+tO(V*!*l z7BT68Q#MTk>r?*f08kj96kY*91#|=&St`paLT(N#lce*Qf7b*6b(QIA?CtNR>DJR( znYCax1#YsfGj3lAj=J^fX*vM>t9#?`uLgWN`=10rb#0wpZU5h~tAm;>r<)e&zTJ1l zw)}1?FaI6WH617bCoeB?9ZKg~wD5!vsx3mFDInx55usjLFl5Kri=TZPt zq7g*37*PT%$!sX$TUMCq5RA~+G$bXbATc@^x$(YeDM`kr(GI-v#2xt4Pu{?4X)FWPGJFfr7E*B-qAZ#;AoTl(@a){=#l{q?9T z%fs5$YvJz`Kz1i_RA%&|WOZbJ1_m+$gp5yL52p0Krt-}Y7CIdOO5xK`isZ>FN0j0Chm{@7gy2Sa5Z)`^LCmcZ@Dgz%4DC_mn4{DHSR#BRxlq z`_%GVn;yFH*J;{w>cB_G#&jSz-L3|J(*gW{(*ABfOfv=IdFkgpn%dxK zI$&v%Q5|8C+H^t_yzy@ zlu6sqKZH4+VQ3u~#@2m@ux!l)7A;?gV>dm7%HDM_AG;qDWYSdi_5*1S**w-uqMwFbL) z?t-6>zjkUNV~M1vv?TzFyp=dBQ$s_tK^ncVsfxxIPyB5!unqvF7g#*Fupw=?(@H4(?LzOolV=P9j)=LU70S=FTi$X@9aNg611L6W~QFwiudx* zn!G;&VhN}g02JVp&>HC-mi;;aEGi}glt5?&fHa9dAo%IaXeBBYtr8*du^b8`)MJ`} zpbXhGrQv5pEnaDG2-VLd6$ zi^stDDwOqZKv4EV#8obbo^vkrJjncf1OUrn;zdU2mP!fSh@O?(v3mD06f`ctlP|o= zx~-MAmoLjScVB)J?V*+ef~@m0@Zr1uGTe6#fa*`&1v5h03B;rmJ=jm|WJ3qmv!@(QEhO zbuz$vuRn-As|N71H=e>PctI_h!biG4V*Z6)r$a1@8OuE6S{R;*mqh*gVQkR0ZY?yeS$ ztz3ib+J3}Ut$@ZQM**OTZzT)`2t9IPycU2fTv!1bxPR@1H8m_ zEz^_XuF@tbpTLlb5)=?#fd~I-`(Gk~zs6VM87_aR#tB~j`Y!~)FYznl;>NQN!`vel z2ZJwNtxdiWUWoHKPl*0WP}7jS?UV;bh~E8+!`1dn1(dd|EP~ne3V&r~pKiKia?~~}FV7CdiB(}K@mJ(rT7x@Xmz8nQN(Ha-1+0swXAQ}@Sh1&RWG zG&Q1z61jjZ(BFp)kN_xb&P>z?flnKpFCj22e!jZ-4wce*NLgcV#)q~WHXsW5g5L|jG&sw*>R=`-+2UYzx)8sU%M4+M;GAs z)BEs)mmb5#2X4jsk$x1!_@K8U9__h7SlN<}F#_O;YY)QT&!0@r6lP>{s@GQf_?@fDOSNp9tU1#3{S^l(j-EXD0vXCHB!28n8_#)vx zg_Me7(wMJ1UiX_Eo_9Jh{i`;e>0JqOSFSW~4}ZCgpAZ)}oPQF=UK!AH zPJ*68B1~P7&?X^CNmdV+3}bdZo=`k3-E)Bx8dg>y?|}& z1~D<#ft#<}i$`udiwoE6!NgEE4o?o_fm0i?v9A=H`^zxaQ;%au4)Ngq%E~lqWH%a?@R#aNerS_QO;%XEZ zF--xXJewB$WLu?+@wn;tP{6c&?*Dg9J-<39fny3_zkOESaoTj3uK}lgL{Jdm3EbTBj z9SBNU6wuSBEEWLNBhwQ}ET)|;Mhk%El)xbbz~bZ}_K z@>;R!*o|1T?*y6PIG%g`ZPsJfZ!$aqK{e%_bPE&ov}1w4mQ{TIh1B=|!)<_H5$G=e zW$HU1WPHK|rM=+K1j0WN5P!_%$qUcIG_V+EK@~9dEr+?U^gfltz=JQqw+I?f0-{?A zG%g9G;`IniFFt8Af{71TqpVLijyx|!FT>ty4mvgwmg@Z4bNdQ!wL?L9Z0 zFz_j1#*_KE=0o4J2>N7#8kbyX95UfnFba>7m9Py;Luqk7wv4pljA`2IXzgmpOt-&2k2c?Qzt!b|n33An9;dth z-(KU}`@Wj}?eSONzS?nDns&eByO{2}e|!Du_y29ai|I>vi;)CA(^SWsG0UA+3QLEF zDffvoQ6ojj5;aDa&=}go!XX%b3B^<+$tXw&Mn!5US_`7Ea-bH!`|0cW!!O>%uRnPa zfBN(_eEr$G_}#DH$G!L6iN%wL;8VU54yiqes94E*M#<|_#rju4CP*UUS3wd&Iqa6h z`j-rSml&8h`{CyM9#-{RIy|J;_b<}!M+q!x>ifVnsrX77f5-Nn1K=g`2I4BjBYb(8 zO89fGevQwWCKIA=I{hdN-LsVUkx3mjp7{hqnp-{$$OsJxf*LmhpnVG5@(1BwI0n10 zY0g#N3a@R~>#sy13G=UlS8yi|M-CPZw zGh@0L3+D_I9?L?jZBG=|C~b$_N7g7kcfu~kBuyLBCHu7l+a+DiNNr3IW&xMU8H9Zr z85)v-^1LPlU$RmGVfC>l9xK7HT1n1IVJxhb?0}WRge<|F*E8pSV`(4a^=Ft0s7q)M zuO~f-5@I3u#%C~79X;B6mHozK6%qq!D*3^s5r3y*)5JOOywXe{z2z!US9;NDrfMJW zN9~jLQf-@+R8pB$M_97~E2|3d<+&uLQYN6)BWsc2UDBJWufjXD@s@_F^3#dPJ@EN- zLBNKJnaj{bG2XWruPZ(GCVWm6M9gQ95fjo&Dx)Y=3?1)7o?jfCuANun>2%i;kdbSv z`;dF!`Skc3Jzig5ek*y+`<3g+^T@oBa*SL@4N;TdNV=S#_bO7=jK}C^5|Zo7B&Tvc z^~}sWT|B9wo;;uK-o8CfpT|kQt5G3RCb(3wf!uFQ7AW^)C_(&sbD=SDL0VNGf-~w7 z8k3BS_y`oIMxePU4yzY8;>r6?`d>8f|1E8**fau3OxqL~2CBKA(Mt{Z(`W^}HsH^V6+8@BF2Ft;#=hLy$0L_p6RGs*r; z$&LgV&5c;#q$1Hfizk+fB2rk}V=Mrs?I=;7DC9o%jS&G5?o+dOaKFBRfSK%*V+mvg zP60m?0aBV41PMk=m+6kQ6ode)ydIQNUH9M^85&8<3m@X3d_rd_LxgGj;;n3JbLgN@mpd%PM67ZZ- zq34pJ_JIOA5v-ukk+~sDGOF1rFA8?-0&1q>V^@TRgaW{8sz2|!^O=9#%6N~C9ym!$Vgq}z8t42gZyqv+UREal}ag{Oecv9 zSt<0mEnpztUAy0e*OfL$Rv7LV;LuZ&m=aqmh*VSpjv6z{YY8w4xT)|7-h)XggW+_%HtV-@no?T+j1jKarDV0?!vH{oS9)z_R@fc&C(?S4(&o^D_ z$$mrmogB}5)tXjvYnunO&#cGu3lPe-1o`TuqvXBz13{9<1XPt5a!mq+I;Zx&1We@I zs_jhfS@Kq;3DC*?l5wf$mi&>_%RCh}CwV2KE!0H00zNd|Z{=D# z<|y;`2^-T+VZ}6_L#?ZOkn?KawL0Hay0q;{9?H8FAe4zt1^C3-$!{eu)U|kT8ZkL1 zuP4`4z)8oVF`#mp>k8}OEVyMZK=tzD2&h;NkCX=Z#TOtYJ0GP*S!k&*L|0QDnyWI= zT$6*k`YIGRv>>Ir7fz||up#ra%p8Gt=`uuDuh0S@rLPQw)A!Q$1{?X5D;8+rT?BL1 z!+8PmWPs1G=1Lo%B6+OWLU2Usk??%|r3!V^c6$CF4}+0TkT1Uc0)Js<=*9|4bD)d_ zk+Hykq@&n&_#~`7L*NyW4u`-*Sh$1{5QAan5s#U^sW9&Ov9N@Z#T=N- zw1T1OT(#fGl)zy+6J};wGm%(Ak*sE9DW;UiW;0-BPGB)5Te7ggEQ^_xqZXJc>6Epy z-6thze*4;}qZ%2O#q_Y8``sgcyN}fTDFw;t0sHll?N=53i%Ij-f-4Yf8tLY^(ip4w1n89go!$ z(BipOfIOGdUMn(JYjWS({VH96QWz-}goINW@!ArGrIo>Ss=PM=NA)`bo&@Ks$u|g) z60#-xjg9BBeA&U&$^+rqRj3`DKvvrbdN*8y>fxQpUa%5*?JHPc22s+q5bc9Yv2e*U z^p3AW|I!JxEm=?5yIdWY-L)PC1KW|+y#+;sdk|H%RNM6ATLX=E6%2f86bKqn3LAKp z!q~SQW?t!-&pLYdW6vu9l%_sbX+>@X0EOIK{);x&_j>@Osc(adN06a11U+VxY9kN; z{QUBl_{p#T3;T|rK||MKtloAAi&t$$cFjUW=Qkm`XaPJDD`4aji@j&>MODWlIE5r) zwr2!#nuicmx)2%*XT%jXV)2^IShRdKddAkFdu%H~GzNwa@%(M7YG2eNqcn6$gt=!b z^c|w1v5kO%Q!EUv1L5qOfX+n|uyziEy=y2eZ9U=U9gO(YEW{*csWGup@fiq-PC{g2 zChXh-VQJ?MXU`yb`-j2PCkXCd0dV*9hqqq{JbVJ-BX>i3V@w!2z-N+5l$Hs5|N4Eh%C7J#KFlU5_T>juy+ZC zqkA~79RUaTP&jyo!qzPawyyr%_J@sw2P~}}G2hM!0l}fj%*jQ8Fyx{Vd=D5RwdE(+3i&<7)m}}#SIrF85 z)SZmk4^A##aB=m9jg14W=i9);)djv@-tcnwfU~`$G8acjxH{Uy)yV-4wl=VxKM(dc zHgI-u;65j&*~8J^37(!_@Sr(5JMo;-`)UsxYdfBs=W+3cqmvK(1EXPWBlI|n1Px&s|cH=t!~J#8B@8kR!OS%Rq3DWhe6GcIitXz|ckQ(oJM z5dQLBo=N2^ycPPtX(~UMcqBfOi4jrRtEBN(~+N-hV0BlOsrUD(2lrrgbB~z8`7joh&a|a173XODOZpKMS_ZH*244*!bn~ zIdfs{`>oCQ$>F|S*!botnGs*4TZ{(E@Ez|}p9X$f$4kLPca;ljLk^-hPQM+PjcBcU<#gvNws<^_$B zJIR1IG&B96ndJ}7>_BK{aD8?VG*;oz%#UK3m*yoIU=R;|=QxrA)&XgIm!>BxX?{wh zwDzD)TaPOT$;FNQ&MNc)FTTr3m-wmIT1T=IEBDVAS|Ab}|h!6_AR4o-u6cqUxAbP7m;dnhZQ ze+pbfGTDX?foFIYyrT(TfoTX%twnHJ12pr(U}(z%X~n`i zmxXo?ZFVU1=0`(+UL;KI<6ta>*E$wPTpHPOn?P=A7Y#F;Kp4z&f?Gfgmaf~1XI^_7 zKl$As@RQ$sijRK!V|?(*Pw>tUe~dRj{w03!>6h4i_$JIGv({Mp!`L>A%K*%Fi$yH~ zf4)mFG6?L!F@=cBY9+WVg}zl7uN?)Wd1RY1ZhP_&?s@ucG<1()uCp(hq&M2zyRd!B zc8m=UAu%QfIT>k4Pl-oHY8Lv>9hPMkW81IMm| zcW@M%x)jn{)-UM?h0W&H9bLSM8J0){nED5GlrqZX(l#Wx(n8%wsC&J8? z=`1TIE=;3>5Hod6h6(qXyC!0$2hZgkt0p5gW|_#W=)$_)ClN&_*EzTnwQY-$oLPa+ zzU8oX@Ka3<(xhQx?f_GBN6J}y7@OI`i0P&lwoJFvN?h(Yw{YUNGxxia$$G+QhCB2L zdV1!*(3=?mqxpO%1TRDDD400J!GPsJU%ukz7zZP&n^|;h0@QP8R)P7j3M$0>kP^%f zErVrn0W3rEF*hh5vxD+r8CHh5VO5wFT8Y`=wU`-PjafmpOp}k1HDN|@EhTW70zexo zlt(VU&U!4&P9{8-4i9PM7dCjA3QyYn34q^A;BNttenI^!J;34_zWVZWJo4y$c&k1mLV)!wHy7*cJZ34Ftq*6wceUb!%(Bsb^!OrJuo=h8bT66j)} z@03l;A#0^MO59a8moz6Ha8IEMJ*l?uAMIt6V7%>sy2n`8CMO7oV>^_1m`>ulx zrM(B8$%-w9(YJIGW1Fu*|JswxKjx7&9fU(TI#=vOLHj6~{s2O98jx7gi%z~5%^W`@ z*DgZq@|_snc^VBPThX-i5c4k!2CjK9bSvO8ANn%mv2z|7P9gMY!gBN^)|93vai?C~ z_T)aV0_gj2o2K#R(zk?59`92OjaNRG1u*pDc|EgW?9TE;0E#c|!N|sIs0xbE)V~7x zmF=pz!Y3#JX0sfi(VqxuGzyCg|EH!N4{RCQg|w%Na0qOi|4}GknvLQok5cB^`W!T}Y@JKy1|@ z;wqOQzIr(lYgZzvekD?xS0TD)1gXs{5LZ2ngxXOa$75=jA---UA}hIUT92sORWM{e z%p&8p3r)ep&j|w*pp$wo^_d_@HmIh>(xuC=SEgSL7ygs>odck>2?z+vQZh^02EM%f z8J>RTQ9Sg>T{w6C7|x$Nf?IDofoGn$4>zB`4*U0P!z(Xc#NNZ#QdX2ArEXb27hbb8KQw@*<3sPB>mLl=UI zlEh?E4q;?I!Ki5Ig`;~AlCvw2RnknUU8BAL073u0k6P9?g5in%N`BS$u0j9A5%?rF z(A$c~l}brquuFnI<+ZUe3g-mq&7-V#h#}ym!pbj)Od*9#ArpEc!6`#jA(h`aq!O&j zEZlMkd<19*0yRO0ZG@!;swM<$|3u3F9CY`O zVB5A`7+FNt6CaDXh){xF1foOykr)+9Rv3zes1UV`i3ov@hX?%q15r)@+_dWm*6+9m z33;`Yta0cXU61m$#GD#>mnf!V zM6fgRqxqM@(3dihmEVBdhGN{-^Cpmb=fT9cfGQ&w=3cx8Sy)neAG((AL_|h4N}30d zR#1<~_*}~0SQwhkC$P=LTq_qC8d<@BAgIxkaF&?_!#U75noD4`gr2^Do}|~Ca3&=#K~Qgg3=C|N>5LOu2FXy#V)a-y?ITN2H@q1^Sq;c<8&~au zx$UbFnB57Fq*nN(Er5SkC&7@;zI6oxa@q-qqev$ZCe)6ho{pnx$pOUGtwLPmIyA36 zN5_z_dVy_2lJSsCi7&Iguzm~MQ%vu&^!|PefM3Zxf#1&uNa&N;psB{uzlf3jUB2{3 zJo?yuccdU zNLIF_;x^3mBdhXGLS#V;lB@bq(7KeBVLRND+6Z<8JsCYh=4VLRtJ(uy$pqX8H1-5P zJ4ywDl%Zn`0V)>xtT^sbg$T{4hXq~MyavOqz9%Kru4A%j)!MVCY;05c#bN>mn=YFMjb0-2R!0y)$jD>y9?I*Eg7Bx z8J;0Q&42)>vDY$Gxn}`94Z%>Dijf-`2bVHckpQ0-0CN-PK~`28a&yv_GAV_#G7^!UEn}wBR0mLWN(nMb+ECdshT-)G zkVx>2&1*nu>oDSrdgyQ#kXSVen_X6mNO|d?Gf}XyNKAJLNdU^ypJ^wNo1Xe&J zjE|tFk#XtX%zJ+_K|gNO44Gyk9}lA9Fmy^nKx#9xYKGt!Q;f*e3Is-EAS65qKEC0Q z*@q}#1aH!U}PT)$FO|F6fJ;nVllR#ycMk@lbAewBSO+^=qv-_6q*e) z`yfQ;)MISZF_sZ`RFSbtuX0}7Ft(n#7psomgp?M(dotYe(ZkHE99a0IsW`yLUwnfg zCvyR6dwg{aP$aPod{BQ}=Rwo3;JdN!8~~+9=rS`%0PvE`4D%Q941ZDp`1CUm;qJRH z;Ep@a;hwv1z+JarkJn#(1|NU;4(`AAPMkb*6Dpd9pfR^WQcf{a@+%RaS&o|C)$mBE zr<6=Y`-Iz8xr{G5g$1Yx*>wbgqBi&@SHmr)5|+MX5Dt_c1VBTw z3jshQvP}cqXjl_G+D0Z&vS0|ScAr#V=pWm59jf~`qHghaSh$nr*^4aBCYvG)A;<}^ z=n?qznWirckN2*pz+2XN|E`o~T&j=N2mm?>GvxD-(Hc9k&|7&+qvAlX&p9gSc?rCH(~p({TLiu3oEA}7+HG4$|D*h zlZVi@WFuMBHuRF|4NYE$^6nj!>#;C)$$*g)8M9LY%soOupi^Sz~$S5NX0Z|8l2EL^PH-ehZ1oZq$p&w9A z;3MD(>kHs90)7NNJy{AEdWrIJ#lZ3`>HZG3;e5@H|I?p&5+z<+H3ZYDR*p&ERb7iurTx)V8gSD;(^-RA`cc zu_FvDd|*fb)E5Axn$c&O)|1XX>nH+X4D5n)kX*44d5w#3?B<8zmsp6CcRqyys+op? z_1JRF?O42aKbjV=#~n|-hnRvU?7#5=tUG!E+fUzx4aaXs^YR_&-Esz2(Y2@?KS~Ce zrvOkS@MAAX8=y#Dt*Rph{00CoPj!yS_W${zZ~}lz_VPcOAW%9nd=l@!`v&g6|6UwEc_RuNm%z$13I0jd@JXm5ld41- zy?<2ku#%omVWselZ-85TBb;IzF)OH?45b*Ro@HvO$I5HqE=Hy$tc?t)qIU!K-}ERP z!t-ba=$|}}q>4qVQ@}I61Zgz`a0ttVm2Wb-mhVDg`xuU`7_F z=a54XO`}JRgtbRFYTG)|H9U^4u~n3GRamT0B!hEdC6z$)`Jpg%41;ElD{8uj@cc)= z!+{&0=Ceufc#@LkW}ak8sy&kT;YMaeAeNz0GG<#w=;*tV1-hqG`o$91ljs;yVH1#q z_`+J0G<4wFGZ%39#98b=dJ@M^UBJ<6&*I3n=WytnbJ%|HG_W9cCZ?Ga0{ywcFrdRRo9%*_=p^|01j66P4*|Zuh>wmy zkgpe!Er_lI9# zG(w{CU}+zxq_94LP%}3Kdh^0zXcIwD41q&nI?_uQAd?E@+^vsd*}7f0<^IQ!Th)a7 zo_iU^%?okkBhO*Y-cz{s@prL&$F;ciiI=c++d-t1H(}G!>v5QX*uLg4tm7I`vz!c@ z&uihM?F4!9<+s0KfZ7fZi38Mz#C&mCRG);!Oohi>6&L<<_MHQuWYCuadLn}b071`j z`OkPjfbX80@!?Qn#jEsfc$W55j6r-a2mAM5qQc>ndBeiB2gPX2_ zRe%I`W?~TmFqM@@Z+;LG%DT`tzJmam1M7e^1%Mg#qhuS&kS}CO$Ai8@Ix8KSn|&55 zCfSi=3d|g$G1D;s*=1GeTe=3>HLYYZ8?kc7HRxNh9lKB7h4uSyA_$J*@P!vx$=AWi zF%8DNKVgyvyjK(6x3v90gQwqm z2T#560v>tgc>>@oxc{Yh@bXW-z_v4wlT`{}B#^bnz$T=C6248bUcGs~(9Cv1U{WR? zed80{{lbso5>3fxn+OxKWg}@X<#i0*S@{Wqh6F(+zujokj!MusaTiHcfZ5(DFq|KV z;Iwk=I&mXv+WXMd*^8F0J~VULw4fVJtqW0IzW|kW3s73ufx^0l$gF55Q$B<0-Zf;V z;jr>ahNV{`jBLaCz7th%tOezz=T-|#>d@Z15>5mo z0b0$RV1gcjj{s=E>uM~6=oB-MUe=EM>TYbH60vd$z~1B6qjEt%wq0`;aa2;9pX~@E<=a@jCNm6YkzA23;?OILnONVV}Cc0PbM`}qwfi+OE zzfQ_(`_L@R_fNsXm3t6Z+DkBv=Q#+V4g^^;4{5to-%lk|Gjt{svWq3V%f;$#`?2rL zZ7A&=MS67?;!9c)l~<44hJJKY))lpmvY_2Ui84qDF89UXQt}#55{nrUWDI4UQrDPZ zBaQgdHmENZ-&M;9&G=lVPN^`m2_i%8!0SK!7|*``0v>B}fC(8~-Xht!@v&vD@I*g&UhfvqEhE8KQ8U{C^ zd)+bEhLedg&-IyC1_VQ4fRb+p(hD!|S>iq^?-Of>P`zXmihCvyQqYOgft`FmykF*{ zsW&ApflyBXoWL&gO&UzaxJi(&cDR=o3}r?lF-bG@Qj~h}LRw`f0ul;Q+Oh~H^E^=8Hi*jZrO4s-wRb#$&ZS!so!?C7 ze+(9`5vc87h3b9@CtHtwH$9J)hweinm5OCl9jcd~RGmZ?KA9v2nRxDv549|h3{N^a z)E}!hMV^`onpIyhLit|s)o|fIY2P^jYI}gC6NJof%42-?r{CfJdvC*|58i>B&s~cL z@4NvI-*W*MAHNrO-+UH3w@l*VvrplkN1sPJnb~ab49xJBFp@0H^v=W#p8|S)Rz?8| zDWD>4+$axa))ryP)d>XX_+u@(yK}IJPSng8`fMOalOOe(R79#+z zK+uk?lb~eiNVY)+BmgKQSqdB56#zc{+Vgnq#i#N3E6*wbeDR0Bz=E-DFy=j*ID})q zZw$`f`vhM3_!oHWm3Ogr*AeVLeLY_O;0Jj6?H}Ud*FHf=_5wbabU4T}kvR$z71rrg z$Y(7en^Xk9pjjeCw_-^m-$IkEz!ZQW=b7)Nc-IEKkOdYA3Qg5gb=*nJiQ>yKjj{#)P@ zSEm3^pN!ekuLM?sF6MdUbpn3TLB-X7^z37GnFmvhM zWjRp*s5+B`4d!cuex*Z1q_HqW4?e4`ixZGGLU-yLII%BybuDQ8(P{ruygkwq@<)GH93($mWKT7Ocf{TXlnx-D@$0;ngu)S z`3R&$4)XJdr?WF0=UKzSavuCWypWZWhK%HNq!0+B5(t_(#VGF_Lf5jb7@Ryz$F>hy zRZGYMLsb-leGt!I-v`YMCpZMeqk7>Ox0%m_Yf!Uj6-G84BFkH%I_=VH7a_N45Y5Bu zQ8Ta(jZ1bQByS;|uPCNO*d?~0cExpM%!QcYo23Bo=~v%Za#y|qqQYUM!-If#=@PfO zDojuSQU3mqj|5>R(d6@Z+K;G+N4SK~|NLKg?BRRy^kWZV+lDnbyn8dw9^a1_pLqoL z-F*uldE`O7_1^oq|CyIiKePt1CC$if9zExJ10G< zB6UT+c}U!seAP;Tk;f1aHO>vg4_OUsP&a%CnJpXPoY28@X7WA-_@u)_BrosVN!kDfbfn@5coQHU zWMAGCSP}?b$cStL5T9Ry=b2Yez5WuOeDxw(;8S?=wU_b22Or^{r(Z_v;t6C|w_wBJ zBe?kf+j#iJCwa{Cc;mw#;`JYVgh!u$5l_7S1Kjo82XKq6;XBWyE>d-elfcn;ER5vto zy9oo!*I;b@W=!rmfR5h9SVCZI>*zyy?E)+spTyEl2hce>iGhh-XdT;%ksaq%c#{G^ z`#9#`DEcN(BPf4>c}J(@5CxCqDhzME7O8cM5LeNI#oNwfURVY5P1rTTnq|P4fF_Jq zUpkSbZIg0Zy-UeomJR915YRWIw|%jrC70gJ(*wuGSV~1{IZahmWuMyBDlM_!rsOa zu1@ao^72I-8DD&KG(rRY36AsN>EM94z!2n+1?Hwo&w4K6)ACSM-Hyb9dcE@XN2WOpmkGQ5t;;~e&$yC41Q52IuCenb?uqMpFl zN;bId^xfEg?h$lvI0es)9y*2+nE98%F{u%CD~_u+z!|=oa1Ki+1N=Zc?Uh10E#L_e zR5(bJC96H{|9Bgq0zl@B^a^Qbj+NMP7Z_|l6wfAg(avThsYXA9bvZpQHDW7u`}UbU64il zcu0@0ESWB85@sSn#NxG`;-T*liK<2Gu=>CmB$l)xII#@t_MApd*BESkqEWMO1WUIb zMQ~aL+@rFvX4eUnbgYD#8-GvvD;3eqGZ%CGipV_3keo#hla09~V_sl3avFzN81qry zvl2T`-;dJv73i6`1|Eq`tW?roNv1HLW-C%!dVI-32r>$6WLqkr$a^v^E$a{_mIVVx zK92%<0-vhblz$GP^zae5@7arZ?W6bb6j|WYuRVuHUbu)mpL_<-y+djI_RkdKd+P0X z@xb%X;(_NL$3xFOjoTl5823E>Bp$x_0-k;66CAnuam{0Mw^LQSU^+Zw}uR0Z&8V)01PZ;t6bVG^Wc4of(0u143_BkTxby#pQ)5lTkYw z=>#DV&23g{7z{C_;T@HOk6sQ9@_dJ-i0TNT zUky|LDuQ4hY+`EBu<9ganA}XiEVxEy;rX{dRK!N$PwKS*pxD%;(2&oA=>GmsGe9w2 z2Fbi(@)2bj1@aeM#wCK_Z~pXWy!peQ;K`TYz-vGFks8AF(mOxEi|>DeGj~6M;srwp z%Bn*1*ap-tUP(r<9t&4&L+j{f6t%BJWI+ew%X-vDTVgBw5M4Q_KJFqPQqssM5Ro)w zP5LeZRLL-RO~NdvC={_kH206Ax^o2K=`4(0qv#o)Kx}3SGE3`FPnlL&*9E_rOcXcu zqIuB<%3CrD^|7WTILEO-kM5`B8fV3%9Hq22c8Wt}ekV@c@gf0XDKe@Tp>uo>ng+LG z;=o-5#d_6#CGt@xc{TO|GSa?AmPHdbC~`~M1dRyZBCqr)Lljd{tVP&h8h=lqBI}fK zoCY>QSiAcOKKl8O@xoiLD7)dVJJ7#;1s&Oh`q?an1SjIDPYt+OJ0{|2-!*+PjnhLzinV9TMCShisg_Fi){23PLDvdu@a`S5vMc;tC> zF5iHOLnp|%w_(%4^H{m-G&*>`o{7U~Ursr^?l}6^Uk8`?CdJ@PD7zENda-!(Ik=LU z#D-dhz`#BnbA2*kA5yG(_YLgG0118uWPbWGL~$m;ZDtS*%>A^((r6kB ze`pAXdb5M6B0_mwC=AF94d(bGG`<)S$t7s)Tta8C7P}9h!PuIe$gOC{+HEIr@Z|ky z?q0_-IDrNIljx)j?HO5*Bd2b~;OK<<(AJvCz1X<(G^$%i(6n$l3aa}t$1w^fWSS;uw~ShxV5(Rt|Owc3_UVtDO746NOc#T$;IuxkZ!yH;W1*zH)p z_Z&J_?nYkQD8~0(kIuEnP_<+qEJDg*9#{hJtR6J3I;9w(xp%q(z>9DGKm|O1Gy60D zSk)!+g}|s~fb#cU2SJN{=K!dU71DyBw%6!OX3`hFUPX;5sv!-qtF!vDVo5tr!fU$iDqOywc>>ID*^^e}gOYgph+aG=a zgR58L#`_<@p|jUx+u@_Aqa;0X;Q~SM3{Kp50XvQ!#r+pw#!El^C2oA|P1uK(@>!D9 zwFNNrokf-x5kMplwfU$_K!x|B?~=jiNI}iO22`=)miMkBh;Bzt^EjG^Hz72m5(BG5 z3NI$(TZF!`P4JJA@y|&pYF>mvR_egiA~=O7A+NCy-AlKju753=+(9&r?o>hN3sxM) zz@~GU8(69sob<#8XEq_XZ55mo>QK96H~KbR2iN#=q}47)C>^19YAq6~$>t*(w2Y5= zD;-F}nuVcR`eh=2!E$UqbuW(G{Tkepq}@}%kCN3RndNF68;{+KW4FBmr-*7T`?HLp zMN;lYC;-$W;OUwAKx5)HW!_p46ec)Z!eBy`EY_Pva5Qy<(QG%&wDE#(SPDi~Y*r&g zX4?lKF{c4ZEGLGuePK-SGPU%BnWZ<(tUQsNQ;DF+6wI0DgsR3K6qC8lwhx5Gd|w#N z@qvX+7|d)Vp--UIv*b1Bh4T4${W*S^?Gl5Gie4m_cA$)osHS%X8V4rOy>btFCk~;F zPA0c&H3qj`r{wVBjmOY1yb*mHuED}}*PwIq6ryUDBeZ-8vb(mRc=3M40Hqh$i4yq5 zcYdfOu$toT8-=F@KHUV-QupQW|2PBG212XeU~a3KVZOeEOWgi5`SNd>LEF#XO^+Nx z=@9}Gr*MpIIYwq6v%2&lEUy76^#drO*GnktMAzzFSibKxrSScz=~;`|f_4;lu2eJJ zF4=w@gWIo1{jw978B_&B=_GM2AP`bY()&vfo+%lGnL`XpnupLgz7F|yon(MzXj!xh z^*u}B8J>ca!WvfCJ|yNc(S0M(avK$|FnMKLSt5hPWNk`<<^kQ77v z1O%qHA-!f4Q912A-y}N5cA=_!0wWuap}2X3?2?Q%vx-c!8gY4z^yJ-$r__!~tw&r| z7oxJeDQn5B91~SwwI3^XPI)IH)2b06BH@yGDc#bO5l^`3Fl}sJ6~A& z#$em=8}aJTKg08%{1NxR`b&gl5&(IB)_(EWbo2t={Q2k1mp|gZ7k&kwgl67X9E@xd z6#yDrk!j74XYq!f%*0~gMj1Kpsz|ur|nde1m z+a1X`1#~sDw7@GPfaKcq>71;|*yegBW4><|Yy$EzKcE=)5jF5kSpbjpcDTjYz%Q{H z(RnPlRlP{5>O*o>Kho+3kt34`H?Dwh;V|Y!H>+M?k-!cisd(kRPgMOD)RQ4_(g`BH z!e7!p zkcvY}uU&}rI(ojYae~b*%HB;Z+h zL^4XJfkz4SrRR@KOU6o?3IMi@;K=#Auz<4HKOtYW^R3x=0v_S1O8T}AtUzi}J%Zx% z(K4_aO#>TYC9!6#ta{dwaE>fxVOdP@>0`ypp!}8aj6^;|HR=}aKzwl@s=C%<0hvrq z?|SsD+K&p}V_|I{imJQNOph#aT5WwRQC!)HR)TqE=^*O+cEHd!iGW66AtTA8q$_V) zgp!6usNwHR`21Z%t5HO@+O=dIDm%wjsEes%AZEJxVfnTlc>dkD@Wzim#2X)ffQxUx zfu~-79nZb>CZ2!iEj;_?Yj}an7vKK~FMRM*-2cLdXkN0D4k(^rk)r~j4an>yAX{U{ z{IeC=UC8_^`6eGF%*cR@N`k9}`C53SU=}Ny1=*9ViF+JX4{$N9!&=kMYbA; z8SV+NaEn*N4~+#Fc-%~P={!n+2`j9bm$1(a7zl8=iPNHV6%+aEQ9uTqjGUHX^sGBX zR+x^^f>tE3;)c?h3~fF}2ULrER@|1Qhg9c>G!+=|9u0UcQ}CXK z)x$c7jM^!lWg;AF_FRYeKK%-lhi*V%at%R)EL|k9O^O0QeXA%Kl0h2JCdiqS{TUMc zj6AeV&`j7M&D@{hN8qPCHY5mzCf8Gnb|ANYF^bxT(Y$yPE4H6Peg8&S`)9+(KNsa) zlPK+2hxn2KWYvu!w_zNm?W>VlGYGe+0^VOZvT6p9Te}EprQJv_=zy=pYt9KF%cPvA z)6gU6$-2mJaYTle1VVzeY8#wGC&RL&KR;@!2`3pE>AiNAe2M4tg`t{CDz|Y6b&EHk zec5g-BuiYe|0WDJmOD`2FG1SNIJxZS#rS;ZJtcykrMr3R>V8k^MWB2%vE zIcsCr^c1F(aw$0laAfiYGgg-Nkqx-(sTc6fJ8$CIcizTRZ@z`c zUwZ?Oy!;xTe(OE1zlBF$`T@?}^9m~(nVfq9q{T#8vC zHFPG~1VHJOAv2=`2~2N5b?-`6%pSg{Vbm-fSIr8=t&5RW+l@T3=2QZEY+)lZsyh&o zU5S+PHUyKoCgeBL>XA%#pI6mI8CZvc`bA_p{m5=yMtM4k`JuHi@+gCeS2@i6D`Dtf zKyWO8g?l2)M-pQ4DiN7gh)CvVczP~EQ*#kd#vV*b9h6q4+J$HP%1}d@6jwT)ya_P1 zc>NcjVcT_gaa$OxuuYkQED(t-Pw)Tgzp(er?F0+5yBR*;jI-6VNhWxR3>FC-22<&2 zCAjE|^fhqRnoLk26BU@at8uylKC|aXqP%4VmCAZ7+kOt~4&RQ+Bln(nDC zXkJF(3u2k%J+ZtS%+X47tqi9;7m%h2C>ruP3<=;eV~hmSoB7nh#Jdt^epO`2C7A7* zfko@CMP>JD70T2!G>M^&N3idPhp_9yvv5f2QWHd&_?0ULC=&SPcYmbnw*a6pK&5^8 zzlsawQaV2s-BASSN=*3A+IJ3s+R&FTRR_qIGBE=GyTpw9jCmvsa6P?oe(NYU9J>>3 zWO-#BlrY^x*naFdZhPoatk|#-yN;f~mcu8odgo#6y6$G|y!HaN>^q5T&fkj*_dbVJ zyU(F-@&tl%7s58W7IOl~CKFoW7)Nfl;S%@feOhoR8ytCjwivSk5NEp$R8qV>CPec|vN7iCs?J>*?u2cZ1C!r~1 zE;0j+1V$UXW~eqRBc}wO(;Mj$%2Qg0#-=t*Zr+9J<}Q?$*P^<-5|f+up{{)yW%CAt zWr3Q*PM;Mmuc94AWz}eG?!fxVZD{Z4Mngj*s%q-6am#kJ53ND{&^FkF7GSnd24;D% zqOt-Q@elum}&DeVF%^2N$2%C?dN6(6_7~gsX3&%HMbn*bkHtfd;9oKa?KZ0c& z4`TD-8_B$G#jZ0?;F`PNp+s9q&?S3!FM_cIBNG6Pr2W$+7NrXoW7Uqs*nH?X&$ShU ztJh=gu0vdI#_CoF2^eEmTva z#S{+0Gp-qC?%4>>Uxb9RF+}7K@c0hQqii*CO@w`L0bD`~2>cxgNo#^b5ZUp(FqTJY zXQccU@T2UOc>)b)`7@o4S~_%izxooJD9sAid=}|&b0wRjbCE#=rXG1@<0&ZXoKPd4 zx>u6@E#HBP?iGB;n=!oeCd`j*Q|wPWA7DCFS|(n7|Hs;}Hr8?VJzybw1V15t(g`Aw z9|C~d_W!Hl!hg=b^G*<Fa7SvSJB#?%9BK6N_;3EoZU&;C}Rvj$+B0b+q+p=$OLsao13~fD+)P`jQ!#t!mtwM6cO3ErSLm6Jh%4III#*lsK z+a#zUV-tz_qj!}tz=reaWhrTlW_iPGrZb#9LeM8cy^GcnJa`VfG#In8>bvB_*h~9? zcO&0&E{n7?s5mE)WptC_^&=vwm~5~aaXC$>YNc#1YgV(NBo%j|f9(k*%C{Nj#}ddQ zky6@&!p43?XH+AXayYko5t=BUQcHSJ(Xk4Jluko??nPYPTGcsW>@5Mm(peMEbNEq` z=TJ7asu;bd!L>*#VWslsb6I%8*fIca0ZAxp>_9~uWn@}Dawx64SMESb`!EL9?84xt zQz#$UM@cL}<$0>N+l(M2=i7elEVdpzj=qrvp20 zcNC**wQlg*t&Q9)-gzG?z%Ce~o#!Vc`&y$$^Xi%?eG$TG754c(*YUcMXQ zxjm}K*TPLEjPPMOIgV#O_%HY*H>wdqCNjGT<+rhY5H=k?iw}PBJ3RN!FY)?Mzs3tc z2E5bxd$N8}4H{dP3tMTkqr9EzNyg;`vw6OlN5<_Vlih}A!7nTme&N~h2ug>OcQR($ z5PU486NJ)u20>~z8KqSsoe7nK4Vko~JQLrQ70*8}8+xvEq}F-7W)7Fq+#>Oq*)Wsf zejC0si94N3rYBCBz-Gi})0;!dO^0l19fX;b@lJth@QW*gXJj^)1!`gs2g+7+mn0ZT zvx*u)Bfb0i(D$rTtX?LznBkd%n!c5ELg%pI;3+f>PoipYGnVYT8?(ZiVC-K((|!}g zgJtT~4?aJ}{f@ig^w`XzJ)g zMj4rkRWyGq1)2p*q#`S=D%@(Mij3sQRFe?Q^+-loYBgfgE7WxPvK|~?1pkOM_(bNw zBeD=K;idHWGRsQ}Ozab2=T8ZqQ-iqdIwa+{Ahoy?Nd=vV%4kARQVoK$I^dSl35x)N zt&E1@a~Qdkc~Z*DT#1Gbtgtg25tLGj972MPYS2GRvBfRo;TQ+$wlQXP~gD4*^N}h{>r$bY>Z%v&)cLR*#U> z0u*y!qO@^Uj+2=X03;w=+H&3V2@V+qgE*KG01Indv3%Vo43CbZy0!+}wr@d2bsdr^ ziQD_f)hyM`th_!+Ed-JXN;UAd`SHC3Wm35%7vJ1u4bZ}hH zDrrY)-5|VzbKo6W3fq7@-UC^rV+Nm#3dCJNN6Ll->C<6(5nMbd^F32163|R8rB?}g0ix%#gm_^BI;leUHFBE1}FE(BY@QW!zXmSN=7p_40f>AY@Z%NA_ z9o1?Sx2=S8L@D#55p(>CVIUn?PWg1sRoY1+yy!Tc;@}>Yjh3MaEErye(vC4yE!u>R zb!TA_Tn|GTMdMe-`$<*+_|^}9rs}q$d{Vs$fM0&0t=l4g)i;2?2SA-^+27Y+k|GlX zCG9hU-yi>SNio39CvQWd^zbg-gWlD9(7AFOI>sik@48!X|KrbMVsagBy6qP1KTMf3 zz8p&@<;!pDv1IK=Y`f+>`qu10&#E0{E}PM{aw{5_Op?BDQQ;`Hi*~@kF$JFV`n8m8 zDGlS8K?YdVw-fn2yC_?wcTw5~#VZqZWZpUXK7xEp!7_*dluhuchf8Q4+{5x<8WsdF+bYX+Guos?ZDvg&$p=-iz+a^@Cn z*m(dKZo3<+HtfaN#6B$Fa0H8%?INSRPK6ywo*K)PVe@?vkerWaKll}{x$Ozq1o6BC zM|~SQHMu3FaTm`n%B_er^_H!l!2J_(3UuS8fv9&BCw zF>AgnqLQ+alv#|TN;3JvYJ|jQAT_TRRt~{%^o~bLejC|!E14)+9?OW#?`ZT*#~kIT zdj*+p4WG3RdY<*r_iBIv&BVV2dLG;-!}R!mwSnB)X}1KpXS>HEGP4HB1@&+ajDc%V z6w>HSN?LodU}QD&8x|4(N0D05&T`}r&**%ll=m`US}~LITiBnN5zjxH($+B`UVV3G z1?$!79Ve+oM&XpWfcHiDO9m)oqh&%=kC-gH{iC028K5XTf}iRL;Zo|h3Xl070KYZ$ z(Gyt5+Nu>j*>)%3FFp7-I z0R$&iLw}Yh{G;+%ud2}9DB|`%5pM-pp0f%dZj99z3Ipq{E9{N)V0QVv3*(=Tc$#B$WK9L5w4!OUIa zD`kjgp&Das;7)n(PDkciL8eo!oM0y#<)^5iW&%cI;Ui=vK%zq8puYq?tOadyE1h()=hi7ay0q|#9WhZr< z(pSa3OpzNkBeeYYwRC`f-v&6@xWzZYC%p?k z*}bZL#z3aFn(a?88$v`zDXiVRQC3}pvu94CwyqH?R&Bu1({~`gunm5cSHsKJV9SBy zXd7nb=@`PU<2Ryj<#xDJs`Reefi1_+Bet+c4GLei?;L6dx6&)8!Cd0YY|=23RNpSP zgO$7)vjeIygR;^&X#reQI^Yo31kcnic&By3GN1(WX>Kv~nCn-{N>YqjT)I(m&GOGe zR9P3&8<(h=Rg!DQ5K}&;7?~a`l6_^}3;wZ<+{>1p~ zBAE>AQ{Ws~1CMy^oOpA5d7Zcgyk0d-ylY_OSwZPb*({$kw2Q^!jVCa?@h};*Oenes zrR~emGP)HhHQh+B??Kzrji~G%M^Vcn)DY;>OB?9*`!KM4QpH3z^p8<0t|1fOg6h68 zGR?&(?w&y3rcnNEO87-ZJZA2by z!pPzzMorqj=8~PdFMwX^ZWsvdSyp#Dj zguvWpbWa{b+p7KQd(M)t(i^O26M{LOu_&a}vkpw3V(n7_!4eKKi)>mxFf}iVjxAb+ zd(0w(U$OHzUi|n^c>d!{xcB8>!zZ4rL-4 zv$b~;GAlX>XwmQ^&;FFXZ7;Ry(dN>HD1jfhKxPgocNqT&!5mxh?s90c(GLSm8;$Mx9M zA|zy0BeQxK5hbI_L5p%Qb4i9zOg?&+ZpA%MyosA0`v}#;*TC3^_eBS5;8(7u3NxEx zfHHbZ08T3Q*U}3t0H_$Cc1CDj7|hl1;6H8OIRFadQ-9(im@$$jfzW@XclafDt)uKQ zkTwlrJ#LxwN?G(Yd6?^)kJ(-+WFuq~^__@FOv9mTuECFg{1MKbzaEc2^*o+@={)M+XBiVNCjo5SMM%4B$!NBUR*hlHMX!9w0 z(i|8&NE=TkqUyIIxO6S%hP06FG{Y*g1r|XyFbk-F84JLi;96P@>>`^mFQf)Gp*64! ztRYy|VV=jWO3tbuwZaG zIthLQ6I-xs`yq^OJ%EPc^{5@%j6F9$hvD6~Bd2pMV#tI?c3zLf%0c)fRZ)@`Q_9C< zVEqB?I`;s)lPcjHQ-qGy2T(J#li(ubr*m0>8lhLZ2XofG3b%tlh1;=D5q0E8NZ9f$ zLc5PLZ&~44!S(GUky1B=p=~Fy;ly27ap)$ruQ`aWwMVe)h9}Um;-Kmcp6!(g=kP2v zELx4!s(#E1$W?*F(m7zrd{(ow$k<&4g3NPUNvGqn@kegM2)3Mf0LSip9qx&3FmWRb z^h#hJhoQJ*l+W=9PTu=A+@q^tY#WL6@*cQ{v7DIO!6zsNkz{=Z1!Q(LO(-j_KsN3X&+fI~ES3rDHL?!ZI<_HGvLg0`@Vje1|-j8>KDfu)IG#k5WqC z3K+>p$=%Di&G$;@rrt9hw9INGbwke~9??ZTYW8xCxdY}q`y((k4spqusHkm1WqlK( zlT(n8nS;Et8WdMIA~r3XtTYjY<#kBQuSRrgIjksov)VSnJ-Lf)G@lM79W&|3l8V|e zvi1P_*Ifs@=vMVTU;#kgJc;IHfL?JqQw&h#FM)0f07VAt0FVo!UXDS&NJ)w6#OoA%t2@BQ7W=!0r&H`Jp226o{{)}@>SKKJvybrOU;iB2j~+vGLL8QkEyn3H=dftWO4QZW4KO+zx}pZO~8J3B&Xq zFihP5gOp9skDr8o!Y1g&aGA>V^j$DY+ytX!TJ$I!Dz{>OYCl}b1bx#x;G5h^8PyBV zE=aN7s1rM5*EVvJSauH z2+Dy36HiJQ?`nb|D~?+MOk}p3IsQn=t;PE7M^RS40JT6$zYsZ99jNLYqi5fYsLTpv zS2UrqdjRFl3y@w^hTMu;)tpe)*ov}-7BzuE|H?I(+(O+n~>WwfY$Lz3~oM5;5tdhb^_(YyO7Ybh0k6Ay`W(j zl%9hAnzx}j@O$W=ybOa=Ut!kC&oJ-Er|{bG4jj79!8o7+22M%vOKm`UO+O|MUcjQs zBWhBF(ymq5dG;|hjO7_1!N6KVUkHA)$WG_T zN2BD+d2uk4_E@fKOvn&tNKZK>rAr}<$;M^|RFe%6l;k(UM(L2{Lr3mWWojgb#>^fw ztlbeD8IK4uE+;29n3|cx-`^jJiSh9EcE{{Fv*GULgSdoLgoebx&dw9g&H?ZYPQ`4p z&pEzX$n4k#J(*aR?@c3Ze4Ye5f}eqRCG@3jP`<~@{U#nounelkoIt*3Cpu5-7&@^G z6t#`P#M&Dsa~$C4;*9{`Ab7ib!EWAsczbvvDJcoz;gsz5mb|t-Vq;?w86J+%z#v%7 zcZ64PBAh~UVHH%4>;+p{rixj9WR6EVR+|Kv`?5~R6kufK`u?>9Ki0=UDh>Zqn0hC} zlVsz)AOC_?`7%L|;78!o2LEY!jsW1L%L0bl?e7`{zjFYTp)mr0G7eZikc6+9L0tb6 zJ;YC$f2*&%4|?t?F!wKlp-&+UWENiUJQ#YA4LZjly|x=S5CGe|x^eSOXYs*XPvhCA zA0PvK2p@d%G1l(dhsgMN96hohFTC^$MpsRuYhgE@eez-4aKm{5XA`bFcMf+ya1YwL z7GTB13f%kjt7I%Ev;Zi*w{Fca%|3{*B~QVv??Kpi-3!~!dtldj2j;h&gJu00Sk|6~ zRW+AYXJFlYGh7xu43DuV;J@Y~B3C?!oHcjDGKm$%R>lj*!Zx^w1)c?c7Aq6koU}K} zY{v3^3&l)iRuP%bTxReP*)}Io3xZ^Wn%Vr#962t9=aQ-5nJ;QQZUOU!mBmX7ej3FB zD_B{IVeXj+GpAUj7q?=|fwLH2zXuD)HlksxA)uF_b?FxLuicNG zr|(hC3BBv~pkTpb6p%gjZ#s?^f@NscD11s*l0lI1R2;$VwQpeN-e17@#AO&>cNxZK zzQ$|CwFMt$>T@y6q5rPC@}xRLo0 zkARFOtUY`)7Ovib#*wY)TYm~xzLb{|b|U#Wn|Z3jMraZ!JWHf;C`|1rBOQ{-{8Px9 zWz-2PyG&~9UWgffrK-JCdZA4`vJ?QOR}aBCgwAW87v?(pz&|8P0bpooBqAfDk&qzk z!H9?mMR-Iw_r)L~F%@yK$?)U3xTH(?$#+PVF$I9$@!5F)C%;rghUli)pEmeUIyq$&h}3-@`0=nS zFyTLK|0@`vcm?f}o`D&2nK>h4fqy}-F>&3)^f+12SM3Z_?G4^C11|x?DH`Q%gE)2l zEm+jI5cl1F7C(LeS^V(5XYuljkKmJE{T!=y9z=3p33l#3ipMX$g4J7Cah8nZ{zo3f zbvN9C=7meJ^Ux`rzUgi(7#POll`C-5V=tqB!zs*^Z#~!%1l{_eDY_N5OWuKT*Nf1! zJ_}7dmkVElruzlx^}PZ;rt38`z4mEnYMy|m@oAV2z6q5Uk zs*8-F7apOBFq`Fq;Mi;g#b?3UHwte4v4~2{ML<|Q!s0UE5f}^Kur%b9b)ckKW)EJ5 z*pg0!v(gQ0y@1r#jbun^2+3|j`!a$nW$E&L*JI;#cVptnjp$gp9R>aCQN8*Y(w3jW zteRcW6zqpy{oT;p^kXu=Ka%yaK%V*ndgs1`!3}`HxvybJAT+=BPnb_26ec*MhK`7m zxNFnR$nD;N^2PhG^uT>+T7C`k`-D|)pu@~2SQQ{NzXMSP&8(Eg@Qf~i@jPG5whO>q z=HE=_@hsawu7_Zztv@Vmd|^uYYho7)bC#>w-c%i)Wa5&iGHjASXy{d{0F8B@*RrFyY#M7Y*2m6hW9itAP4)-K8%&yjw3p| z0Wo=Plpaws?nKkdW3WkRQ9ZtTKGo18IBR@)U#yez zSx{5YWcbJD;RiqYlw^kJ#{UHX)p%gmXWd7Tz5zxquf&A^w0-9QDB$<`CCXlAm;j)f zMu!=5iFx-+=F#dC4=MoE^C^W!B#2B)?o$LKFUmzS!2G&ylvFojXm9{eK5{31@W$hK z<>CYCGn(&x@*}L?eH5`-MVKJ)-E_~RSh`^+x`)Sc^t$V?@7gn{>lnevs;xMD>SlBd zj-#c206VX{9SbLp)5{h?--#gN)(cI^ZLl4A3;GKPa4k>4VCWrKto{U++kOMvZNG)x z#$Us3;^(j&`T-0(UWTUbacG(zh4GSC;j{Kd#I3p)7I6#VozjZT`Xwx^1F#LsMq14{ z@>(V^*C!8dk)?>ptV2k0IdUo&BDb;=DFt;%$gMymt8exic;u2LiDV;~xkex;wUV+f1Fk`7WVOABNn<`T|Dw`r$#!ehWD?;# zCN#AQLCIB!qGQT$9;c(Kf?Y%n9AevG9!R$1S*#lV`jP&-Mit!l)@Yw_aDS>qWXha4mv;NqH7GZqrX|#`Q!sLM)vHkcxC|R&VeJ{n( z$`diE1*oZ8fIzZ3J1Z-AI@w~5nW3_|=Ej&~ZUPGvE@#e!qn#bxoSl(M5bPTo!Pw+( z9J%R9f?x}}m+i;a>mJ1V?6-LLr(d9J%?VhAmLaTs z2|_DJ;Z-;QpTb^5*Nq~!ZUsCu`;c6}7HJJ@;hWrsn8JQFi%Ue|AWSHGG>(*(ZVRC) zz5vV7*P!Wq4El?nhwbJc!+OWBF=yYOVYH1Ec;_Wp?zs%h&Hsg2t9}Cgo>!r1dm2XF z7ZFSuoWAaESVT7=rE&n>V_Pt?VhehgZNpB2#pDr!Yd{9ZHy%_Ul)3K0?bvrK1O14_u3_N6+KoH-3(Nx4rprL@B*v5X*5f~1TB^ed@csp!TE=*efK)YtRm^AhysTO9)SGksE! zT;7U1o_GN_-1Pt^Ht)vRs!b|fCADe^;_D|6)wB(f4I2syR|C&8mw(SIJdR9?E1jBHyD`Hb}P+U?8 zFDEz5n`r?*cL&Ti)hGA~2pYglpP)=|HaF40a)uFRahaABiLQ=Dbo4I5{?m6LHnS3o zmTtkR+aD*u-ii$b!I08H=0T43KIDGXeU;J*$N&=&n3RW)fAKp-^1fk!1U&&hF{$_8 zGr%bm02KBo%ufJNH$+A{K|})oiuttSntK%hst;7tRL09^2EDSOZx^9@aX0L_1`GJo zmabfh_uqRHXV0C-9rrwpr{DM)qDmH#^`x?*WDrC%VG>k?nPDX`qlB0hQVPq6TFhdh zlVNX0PN|gD5<(&EbctjZ+0e-ME?l~xskjw07E|{2JqMeOKc;;GP5u4QkQJH=0Pgr4 z7F+&+dE5Q~n@zvPyp=zOem7-t$J6j$`UKL~--Ee{?P|WdMXUCZecp@}EVS~u$+2x` zVC|QVk#+m=-cNq3vhxOoM_*~5>^U<3qFiUvf&#@-DPG08~FDaK9r zK7l)*d;=f+{u1teLzMZ%de9}H}QQQba>x8C~*k3Rbf z&foDcI!Cv{J*FDYsROV~UjfIWNjR0PhkNcKxWtyQa2Fvyy#Qkq+i~|}uj1kdzsDQD z`4ZV}8(}D68f2P=(m*a>!;>kq9A)y>eCVm!teKbIjnIUTz@Y6$0^s|YapdtB%#GM)SMPH_9=R|*I%PJV%TWP*W5euC&t7vWsLA0`3KWV^L| z)~R++0*8!EmG3OQMTH&4C0_T)&*k_Kyl>qHl zyoAoM1-@i3u~{WpyLC5id+<5D_R$~k;UB(4{n&Aq1(rE^Mz;c%l}xzDH6mTUwK12H znq^Vn)BzfeISe!=m^a4~zHTm8<1`BEJBa{2 zN!7PSKzKaj6Vl*lZI3DDW8r2$3ll~e!Nt}JHkMOhs;5K5XM{0k1{iNOv@rfs9+9&o0m=kuVjo5lbQ0eA zo$&WkU z(2*80t8+5~q>J$LTGk?-)Q@G|+pwyCI~I3tLhHu;=-7KdymC8ekVt*@uYf`Le3(Wp zz}Tp2jE}5>`J5VrufXv^33^tP*1mxV@NSa){tTU^ ze}~1UFEF+H1Lze~-7@aRsE)T`vh6$QZoUkiEmxr5^9797eg>1aH=sunpxv_HA!hwU zm=?W|)Xo@qL{-4jJA)QcC@g2^V*;tKrnb?r@=iuhWh;Eck`Ww{h&UoQM_VU2+q=Tk z)rX`DSNQpcAUJ3aEQtW4NVU%`sYZN$4W@b~puBw#qD#Aoh=|-hGBDP+2zsVr;{G z7?rUeGf4f3ClxZcW)0kAT(6Qm?5vdL? zh0yaTqCQ>%Rpu^O9KHnA0h0WP*i?spfc{aE^bV2Adl)bxyTKt+fe&1V?*8i}Ari=~ zIs&L9vit$&N56%|p^KP3@K;Pv?~=+^5ecg7_y$lWM!Ds}+%1bFc>YLMED}nWAw0bj zlU$>aN_Dr*q&X4N4pnqNRCDixPUCr)v_6ip75iaGr09~_h?~2ZsL_@%H6D-YQ)j@_$ra|t#+XV3 zG~U#h$j_M6UlSr7b5c94G1bBb#pMf7vur(LN}G_pU@fe|<{_qT3zb7^wnsMf`Nl&? z2~0zZVH{KlGcry5b1^Bb1YIY8hm6J^1m!fMwsRk{YC2&$!=LKn4FB+CRL)-rfA86t zGGP*2933!W%qUD9KNge6jlsk*W<+{sm^{Xu>Ng%Urc6OnTpa3a7oc%z2L_JaM;k>c z7Ip1H_JR&{Y&(PHyY7Ws>OxrpOzK^OD@ z>Xxm-qSbvEIC(z~Kl&-2EMC2FX7Yuh7Z;1fi-TdI?6^M|KDA+oBlB$y=k*3ZR zer&^!5G*~akW{w`=}Y#*#FN^?3zsLWT?!Fn7Up&wM$V!EOmK{W;W&O7-xjt3sj!Z3 zf@*d%j4SWN*xvUsecR`-+jR+kTVF-+>T?LF?1pP-8nPC2VibR}lRpMDIYxS0LEpKA zB(Oq~F!^28Vi+*&3yA=U{G9V)lh%&Vb&o=4?omwG_BKpO-8CRW(_``@;!_>?Ng_cV zCcJH5L$&K$sCHa|YVY?%ek>hQoTEQb{Hqvy=u6n1_!226-bX~!aT?zui2#kA;@Oe*fcxXxE#z4=WzZhsx2Tc1OC z`w6&aH=~H8s+qnt_I!>W-A$5=XlBAx5vX#=!E0d`{Fq`0j(PNkZ z$6@mLDR7u+BN5;z16DhYNb)nqShG|%)kCyk#d-H4fFJ_e(WWhs;ia6Hv#oUtjUjvEiVnN~A zMBo13AS9&>nN{rwPOn1Iq7A5Bdk7YRc_d*cQa=+x(?+1;>&wpkE^sPss>3Bfe#1+; z{--JFF%e!PjZYBbO~g$lKnCv$KdDvUpO^#*ym5Sc?MHk@l-RuM98JDhNrF+?5ec#i zLPTi9Hz=luAg^H^S~u)Peakv5S=o)I6|2#-cB}NDZCTeb*k!JO4yn0D;qx#iBm>?w zDGuEKU-;m=Yxt1zf8e!`5mCPp`XMzi3$2BbFTZ0+J3Omy*0js`hN$ zdO|BLz)i?)+JoMc&tdKHKcQyh{nWlhT3ng5sN!H|6Gn^41BqD`h)>FgzfUl{J!aDm zPU^3-H)hRrgyjr-I5_*j(#{(`;h890*iRA(pXHWC#FGItQt4ZFoU!3tf@|4ID~ooC>7JIQXt% z*t{;RzwaH4j#&*|BEj(oKEjxjL~h4O@?#R*Ppa-dk_dNvM+Eqd8keEkO+>h#{EqQ; zz$=7{n0DJ|n0@ypWSqD_n;A>^xzKT@F?P)+2{#3$E01C2!6#r5Tmju#Ojb!mgpn|I z&q7qwUKr=>k}hfJEPn?^I|2Oxk}UZe?xxS+u=Ra7G@PZ)V;`(YJJ7Sslx`@oN~$Xn zAU~AM4=D3llHnwAFT)JqMCea+#5fB_Oqn(l=3^&e@`S0do-qrvEG%I)%>vUVPl3hc zsf1}H{mq0ek)OStJN#!y!Y3>Z=6njz1WyE)cfumJ9J)R!7#om`34U|nlTMOY&rYn` ze+Kz&-LQ-*feA^UdTumlJoBJKgv8&&4lQhjeMAwAEj(Z{!5R~$T4VYQYs|EoMH{ID zX3em|tm!id(_uSfI%Z9!I+Elkx$W%W<>QZl;5i76&%-#U2zVq^!8v{bR1-a+JKhOK z9r*T8$Ka9 zja0xaly@FM;qqg$M9XTMOD>g@f>Ex?Sbg9;S_jUN)R2a;wsWMnL@YvzFgmpxs+1#` zKt!P0Oe*Tu?_oG_9pm~xhIRkzh~M})+!Cu0U)=*^+Vy!el8#Lx5>%1OD+o|!R|G@H zxkQ2_0h08mPYa}A#UZqxegzX#s0^T_X z1G$+wh>nayQhYiJ^2?B(Q3%iAWK8!-gt=!jqU(BL;!BdN zUpmIjPJ&xXAs+hMJNSy`DSsk@H|@2je@kj`9!!1nFqY<#sYfP_Lkt|ENqwH%1~V&f zm|Hl(%GOPK949g|3dxB{$j!<|dP*u{A|jBUn1H;rbYvwaA~GZd@$vCUOin{$N;bU1 z`7qWbq}8m$L~q(qtwS)`E(o)n0;KSaqFN*tHen{I|A*nhe=rOMpal%IAe7(T~8-1b(L`z$HovkR~8M6|YZZ$Oka$Ob?e%EzT{egP*4- zlEeKmKPM8!1$l^0pNH|@B)xf)3K3d{Q6YJ-3W~>bFT8}SROU6>ovu)Ee5d(U;@#PG zJ1K4%Ohf8m;6c)h1MT|!-lY|nOKNKAV=!C!0aU9m!Lau-3^$RQ+xrwO%y>1&{}AX4V<6!S~${5XMi0=0+8 z%OM8i-J;+Yk&el>o`|K1mX?tR4_9xJ790q6aCUTqx3?ec?VVv~=LA=GKLpQ7Kx#oX z#?A79g?B2cec3Re4MH^~3aY7mX6UxcSV zaw;S#j7ZRlRA1*(BFMQ!MunsXlX^r_!mN;Lc%*b-tT#y%o;8Tu`8*u9y@v6JuVD0v zt3-0&LHEe_FgQsP*(s7f4}A~a6F)-d1iuyXHH?m3!n7mr!T;1d$UOQQsj)<)w){3i zA(2uZ45>_saH+jsDQyVK>A)1XbeP*jV1`E&ES>#f>J*Bg>a`eEKm=I*7$$E08ai7@ z<=#YOON2jW(?_uE`5U4(oI_!252pDhVJeZ*1d^0>`4KGJH0iFaK5Zxlwiz%Y5;P&n zGQFY$Gd&_P!NMMH9zO8&@EE7~+&-8~5&uy=HXi>n*eB^05dVWe63l2+kL^$0;|P#Ao@ zykTSK3`aMA*!sl7E3pm%SxZR(h`~gg09enoM@D1-R+hzMU{y1k>S__2TZ_@YH0Jin zG{>kf?1JGnCmHX4`lT$`&>EN4HIbh5jz78OOJ4H&zvW+rV*=za$n&)ViTu<=c#Q`6 z$~8!Lfg1;iScm}ic&8zWLuJEia5@b5VN4>x%&Ja!1;)X4rZsYtqOh&23H$c!Mp{t= z?D>N>UPUkoF2(530!;CX!R_ZB!8eruRT`j6G^0MEGM@kDM>v)ALgh0LMgj9->{Ukj z=Mp*5!k)?3&KjZ0dk|wfKZZ`{B^YhI3>}gHje93r#vhdy3JQhWz^rX6Nk*<$8QTR76h4Gs>6UqCnl!s1X+*^GpOdg)cL+V!_% zj2n?RNwB(n=agP6UU1YF92yopYhjAD^-$*b-qmS71uzA*j+w6>WV63s{fn_fcn z`g@Vtuo~V;<(R)>59W0ogmrX-H1Aj)=6>XplZ|bYVMue(At(n)MGIl&=nF4jJ`BMJ zmeZ|aVQD3iPC#HVN$pOUFmW=ey-o-v0`&3pg{_Sv?48`;G&>6JaYcx%Tt#h4!03Q% zj0?)ZME4Nf{pfG;Ep6C*Xb2PFSM={gS}wV5JD}&10#iTIB;5H`xdiCh64?i3A*Qe% z7Eb=Kaq)pW5iFCSor5E0+1Md4C=_wA@$hi-kmi(^n;*jX)jSVROed1Faq@w^e}h41r8wsT!ql+Y&a50WX45d_l7o{Ie7-z#fxAUPU@Iz0ZaqSU=mu2v3{vY zuW7?yKD>-~u3p0hBHyRKx`yrt--3Qf1N3KCVpKpmj6C?LAtG37BEOk@-G?N=l1DJM z>wOsYe2&or-@VrjwHPhIjr1#9B+Pb5r6vodpPyb?~$^o7rL|OVP^Ab*z9~6R-67p z_!9y*{}wsh9z;xi7aT}hS-83nJ8pXr=U@90f4Kr=wH<+ZU_Gg0HMCI`5h)Rf2z7~| z^obZ%cGRB^r9{X?P|ju2HA2-i+RW^$pbF@K`Lf?)@~LlN!q)^(kV<@pB*0VO!-)LM zj$gv8WA7vQ``gwG2I|l271{g%PVrI*|u;1}IY__}tn@xX(Pw#o8ZM_$1t(#Hb zz8+^DdTg!*0_2ikU}gnuW9Jf?(1z=rL31zacOu9FB*$3BVrBo?N&f$)n?!-p3yOY2$s z(c)$TlqEp%?mr8KzYY?-=>*6F%g5u0AD;`z1jr9UvkJU;>+M8J`z>@@p2w)R7vZ+%j}ieodpnl)>_Sf4c1+J`hh@VN7%aIDPTT(muYIo}VgH{I(6Se9 zS#?M*rt(+zp|Y(P8&5rk{<~j*dv*s&fK0RmA}2QWh@d1QqvDm`EH zFCbzsqjBM~WI|;UG<2mlIuy|cQ-IObx5m~{a0to7#=WO;^vvDp+`LaZA97A@KYSXF zVodpABEFXpc=SW~AAB2$hh9Y9?ne;6s0YnmTe0cj-Pm*bNo+gwXM`1RfF9rRR1=^? zf_Aid@g_!_iLS+L_{Eo?sHPP@;c0O8i-m)4BwPZc2+>4@X^71#MRZy*V$+L|S5|}m z-N$kI!KcvNcL<|ANNTl|b6^anxrJc@ z#UJIG3S;j)BEWJO1kHu%oNA~%NviXv2^>gLgjWG{11ez}T8~k)%V6%4hpB-Dunf$> zc;9?X2&#lZa0d*k9>68tW)s!%8Vzh@`T51Qs=5W_m3GD_0}B zVI!i-+TovAf|!C@q*t{dD7zMhwsT!q|4U?`Gt8EsljYY zM9knj$0RxF+h=05XAvwSYhfJQ0-e+@OzwLI=676%*=?V~^wh_&KYjrTr(Z$V&c|UL zzYwNwnV9Tfh)DtSU_QHo$|H4}q&*!MmN-czrm~nAb!dYzaxR215xu@mjC8i5iIpFW zXLuqqha{oq^~hMj6V6 zUs(DkBcgB_{4R9n&Sv%fLETK3|gGis4hM`Q39q zq{M;0np@ygLGqpFP^gBw|ude{M&Y(Mp|7b z@|ya{T!#{pQVLqOptOAlLbB_TS<`{4)?VaSwPOBavNtRtX=pi$7Oq0!l71vCps>}) z;aA;{QQ?&^39le^c%F1)gbC3&q8i3w3t%w2iX@V3ObjSOW!Ev(Z8(Mn-M3@;;b#!B z_9^)8_#9JKy@GKoU&f@h7cgnv1&rx>75W{|V@%IKFlxhV5=^>Yf=TDgw3y$)^eykf zqW^U`uXz$NYaW1kL=(n)mt%6!d{P|>i4d|eBccu_{81U2WM-t+o07CUiimxJLoilv zJ&JYPk6;d|QhqU+@Cr|o-U$wj&4mA)bX2u$MDgOyw7?@_=9DEJo@qdf!O)$Eh^0T0 z#6}`Oeb;>H&gN)Rx5m)UZ8F^-*;Pw1aO!?+ICvJ(3s%6tdJR&S?}l|sJ$$nlA|$IC zk+};HS5%MUmOdocbd$Qp=hjh~ZbU#ta;$DM@yRztFh;J{mmtWK0uP+*2myW>Ss_z4?^dy$J~`iQPX!H z;u|QwLk@J@sZ1g}z6;FPA^Ex>OTUIB1sYSI@SzAMHW5UAzL@D3kFq7}uyo6D#8h>_ zvv4U~N>{-;dkJi^nqZ$gAA$LG62Z?YScJUhZ7_18jf$joW9d0Ze(XoSp~QCS=92Wf zTB@X#m^sFh^yQ1O4iT80T8)IV7Q~k2O^!z?HdV*@i_>Jdlz2UEEbL_~2g^P}zTp=Wm;m)1<6&kOG)REb z=Wc(bMNDg4TmxhRlms5WE~q6ymi&kWNy_7Qf0+Q;&ENx3sr&FXg{|6i3LV>zVQK$< zEbBjn4g2rJ!meEyxb43%!#@@&3!2f~zYk5ldvW0Yr?B%k=dtbVL)dZ0Ls+rnBsQOY z9BWTJj@7sQ5o5#V!6c*{Mnr%HVdX@8WG50d@+*Xq7fou%7|aOEM#<7%Y}k92RFflU z8n_+Rdme??lH>3vSY)n6dha6$Uv>ub4m^j5m1j}3>q(^cK8XBnzeVY;KO%eJNt7Lb z89r@i5w-C#r1w9B!v4FFwc-%!dT&R=*1O=C*?@_mB`9BiJ4XAlq(nO{5um z7~>v=)l`Sxqj#cU@oH2q--y`Kg@~Kmh`Gyp5tLIy1bqzi))8rtG^x)7;6!a;smGn9 zJ0d|@5@YGBR3br%n27xN!DK_S^9>3!e!OUUFj7hK894h0_CN3x8rSbYT}MCG@4gL@ z*%fH&-i^4j#VBfChs7k3cO5#9gqrO{V%bDIRavOV**Vu=yBTpcsc|YZyNsE+-l?ag4eZC2!M-m_tp&^xNM3SKq5tSK9+J<%s zaE-4d>24*;sQ*GUtFUb2L3C`UF_XwnBbX3I5~@cj zks$S@jr=9*@By$PnB^6P(#B4tS1h5rEJ4N6 z^;odH2i5KCQP{K!bEwTB1x-{JQsZq%BVb9Eq(7P1_~Ut zTelp*f|Y&9T(A_`HEk$sS&zKBl_+iA085`ah%Kwb+}3rdU$d1K?silx+d%O*(xTmg ziWPmRUAG5mi+WJicNXTMr7-Z!f&r-)20^qi{b)yb&makg#CvywQ#7UprlDpH5x~k# zSh!(7DmwQesr?{=m!F1ya4o3-nFwk=jv0B~2y8hDkNRCm={|>m=EDeEb`lZGZi8pT zL8NRt598z&@M}Md@U~-cD_({0`5REP;S{QSPQkaR1x_gq$X|X4=0w1Hw7VLRv|>Oz zx4vCCCVI!Bv3n27m#stD(sgL=*@MDGt5LgpGZt;2GUqQtV)beit=K0?5C)`H8_+^9 zBI#kYFSXN+@+4JQkEAX=B0K3#4R(`MWIz+yz+QeN#*8O1sfda5nxzj$nwvSH#;PDE57kr0~(eDlMBr9B4u zvkFXVqAr!K&vkUnCiO8Hy0%dWDPD@!?Pm~QzaI0q+==|M{>heWx|P6~RAYV!+nCB5 z?ZO}JPKGn7rO~C02+XKJ1WB`7PCST}1IN+Ue*lN?dlFS`y;!~D6bcq?KuXOTq&IED zf7)79000xWNkld|XlaysddGq5he9!{7!GMU*fL{aSlXplOG9guwPs7ol;fLbp z9<1H_8{{l#LwO73Q_)EClGN(@Hp+W7s#fj5nu8C+)R~XiqOqfT@&+ayc0gmOL-o~h z%^;JA)`!{?Kz&M@iAgYNFaGn%k4T(MAO^Xzmkd!vsAs)ulXCoxJ z6noA*f;1xIl0~bKP*jJ!+Ezjf(&rN?5+QFm_6V$KGuE|^mZU#^*Ir+ppOFhcb&*7U zOZB0)8xr~PjXMLHH%25O^65ML6oZjdJVx8I1gJrP3Kdu)K&=Eg1imdUodTmKKIuRN zGFd9*cY(jV{u6fXKZx2zO<1^ODH>arp?&o_EL*t-P0LoGy>mU9majzHnhjXe(TRo2 zI?&L%0*xy=v81a9tsDBWVA(3vuUwD%)ikNgYiV~Ul+_@4ULB(I%P=Rq7>Pv{h$b_o zuo4+1)mYQN8#PTUDbH?ntlNUxB^_ARy%lBkEht^sg2t8WFu!#r<}F-`s>W97<2!XN z9jIR1j`@q)P|3#|HLsvN+NpkBD64HkU~~#X;?fZim4eueA{19IMmb4#b4V=-PA!FB zd>;H0@-ds>pOA;(6jH@oh~Vm*QPJFn>gIM-G%i7TV>7CnmtsLnE2@`up}27^d}0eJ zeX#_#2PVy>Jc{8RlRpTb*aG;*6_UL`vNOD*bKxDE2Z!KfWReP;TicG9{P{?&Scu%Z zCDcy~kY2SAnbl3mq{YJF^{ci>M3G8_=@^m@_ozZRh2_98REA4L9=UTRKQ`HqP3Q1D z32b)=$tL7Tr#kbwi19@YBz-lau)YJe?R`irs6%S$A{rO+FK(o;MWm)RAg5-z^hw5i zlH&3yu48Bx?1FP(<(CE60C!gVKqA*b|EQni^-8BF#i6@ zoWdGp*SC^NI-gLD=H4BMpIeKRs>MjIT#Ur>#i;7o2$x98Gav!e{o*j)hmnA3UTh}9 zlKd?FqF~|8-)4!zbk9&scJ@P78ZTD^X8U z_B6i)O!7&>6yFp=GA8>ZW2#@O1ooTcog~>UW~XDCe;O7y4wKxYF@-SMEfUk*BQVV^gb1(*&1<(Ht&BDhn#c2Lo_6#O&>HDN`I1%0CsJHK za0CuvDVX3IjL9CMnBo~uZHl7&A~4k>29w;Pql|2l zMZ(HG2vI57`1lgv1(q)X$_x4@NfH#0-wq)wuXhC>+zk9`2vDfM(u0y}0=#nd8os#l z9X`7FrG!stXW`EM=+f8t;PbEW5xL*`_;Y+fes7ZbKKZ{-_IC+yfAJ08`21^J`1C8h ze(_tp{>4?i^9}IcRY)gIze^@RHuBb&-{Vtqzkm4$e0b$2e02Foy!-jLpd|SCs~_HkUj5{I{Qc8wc=5fj@z?ji#>*dF!7~>=!m}6N$Fr}!jX(Y4 z9sKFc&=`&V%9Q?KBm=ib7(X9$0M3-|v14czyKHzlzBo~K_Q2KHmz{nS5j=M%5V z_}$Bdzv7-JU&0-azkoX)dmeZG_C=h1^e;H|@Uys!!tQ?JZ@B&ZUnuMa$-Mpi^SF(| zj@^ysp(maekgah~e7KhF~LH6_5bmAN~pLhU$$IhYu z*aPT3crSVm-iN-U52EMDy;!^d4A$*CjqU?yuzvRmY}j)Qdrser!*@J@gSVf zq2D}!X*$`n^CiBE7=FgZyRb?ZAVr67R+BhK-h-r z6+2M5f;6s!K;AH<+ve1dyqQQKJD(K8 zrtGJ@fg(R>$wVhiG9+jU!}Uqb}C05#wNQ3t`fdu zJE!9?j;{tkhbqE29=jz|0TEY}%k^RnhClqxUqzEY4awKMu2Wrkeh$^+s>06o7kLOj zrCa!o%?DD7M-)qqUyW9~266qlL?-DGk*L^}n(rSTW-Q?^qHsSn8fmhusO!{y5J zQ=TUhGx8iE0+bfBngAt}+*$(Ez|caMJ5Vgd;fr3jv-$n^*Q7-$y-vsRDIE_i6O+h` ze{9P6uz8J4Ufg{8G!L2lQ|8U!SC81u=|oMpr? zVo1zFraB(iMNTIZr6y$3;__rWo9xf#jUb0>)?3a;k+8OHO2pI_s7!EOo5N)S zrK4g?MYRY~OKORxF}k1`9Z~IQQA;c}QBx)E6j6_vY7yMfNUs0lo>%9^dG$Tt=e+ow z=bTKRHA0Om3u7-G+@U`&uwOnF=E?|x-fy6{sV{dd#5)l*l_>GQLW#lJt;KiiB|AG! z^V<&4Vz#;kG>v~=p}CZb0E;uC4HzX<#M7TM{y;PLEEkZA&~71tdEb#Nezgbh^~+M) zHi(PQRm0v$(Tb6MvP-@NZ(z5xuc=9@R6|Ffz$EviwUD94M#b@r;DQ{>8B4(hEZ||( zq*2b2QHwzSXTkAvsx9Fi_?_yJwe&=b2Mw5*nkgdGYT{+ z^)?qmNO{AAOFrw6)6Xh1DIe{f%6rfnz8#m4nuV8GEr$`>jiF=yGwk%fbx9ULPb-wU zH8fPUZ0d@~mwp62szK)sz2T zLl-pYH4L&AZh8{Adt_l`o$r|z8NZiO z6MQj#T(I|YN05oMlKHu3T`Gvl1cpN+J6XA`ket5HAm=0}=|#q1LOiZZK% zXReIo2e8GiE;(2-9=Y$p-p8kM)EU@8*g7*CUcYAXpj3UM%peaes3X=Cq93=HGMjU_ zJ?F2xSQTo)%G116JImZ|ENI>DA$quc`+U4_MCe$-W+vI!Bpm8YdtSNo)9##VlLmTc z7=nEBkbV5{?9Ok;bzPvLH31X@(qFOPnI~V4L4Nh)z*dqV?wZT)rg<+bcPLzw!-UU) zyz-tzgCxKh4`!aaLI>Hblmy#)gCCtjJhIxbVqdk%s141m{9yV>3q zC!&5^d_DXp1_VbfS(A2$x7nC}FPtvTwygRk{Ev?XFl{->J>e$QvDXkY9Ed~pDi>gz zt2T%^(9jv;`&PO`CvDDmwQT=U%(Fe6fSdOol}2CPuCRMh{k(6CEr(rq*eW!J$K*14 znV-GE#LlbMbh$QZAl7hprFrygmDBg!8^a%tQ%dT1$;@nA=b8x=@%miF2+$rCsS@{Y z)YmAGU$~&j5VmJ}fR%2hr*&<-MI=KpzxR41Sl}Fl#anJ}ilHO75735F-N)Cm-iLiW zLSxt;Riew1^|QY@++GeUq)mbxPTW}b=0%fdh{}MhMoIPWM8OZi9%CI>Zm9$ zsTS*G;znLrL6O;6cgpm5*}rR&*RNJo3_7k6wT@o7{K7A~CHg63bgOE2zQ;SK7C5{b zeSw&a2kTXR)6c0KV|#|zg5fbrz%;$lO%wvKj#L;*Q-X(*X)| zwfxm}PEP#Z(7L!okhS#OMU+sL6c{A;-FjvuoziaHNY%4p9vJuIT6>v;V4ivxq>WD$ zYu=`{+5%-HqZD3(ZXF``8&H_Vq^?l^YEo{Oqs*84=$+iKN{#UZ}{o4 zrg4XJhOnr}P6Q8*_SIb_-)ZieQ1&w`=y6I8yGr~5do}-$Cvp3>4(Y^{;pVbDtkj?i zwPDhdb#U;{#6n?=QL7O_{BY$>(uysZCJ|Mde{0o^Hg5+08*2`!{{j{Sc_N;AuYAl9 zJl}8e3){D1J67Lf(KY&}41qc(c9N%7w@U~dqX&h^#evJZ@;>~*<-wmh=&nQRln~7+ z$@vcvgq)^xKzAM})AB83C@wKAdZ}bQmI@0LyH?+D;{TfQq-7ClwJ~)In@HS<51Umv z{ry?aKN*PojNseP=7w4yIp!LH;$Ow9h$%@xHjWC^<5EoP+c4DoT_f2) zQW^D=ygF)moeZ*LzxdNf4;|)?X6~HASP4Dkt_qkQUrPBL>waq$9$W!3s=Z9wT_;>2 z|1$M1%}6L+-;8+E!zyCoa$NIxWLh0w$=fepDTQxn4PfkBuQj?zCOaIgg!Xg2t&t^b zx^ka1oe4)@{`)ZQWPvcIA2{s`2YG7>A$ROHum~?3x8M>x+lP0>NO3V&Lyo-7p zsAT)F0d~ihFTbk-aNlE_=4w|Bt{hajMH@vx0pt0<`ftnJ%}UvZfnyn_o~mhTD};)P zf?@3~0Ge7R8ukb5G8I9q($lQ=xP7@eWiuB?rmN`O7x0-`LsHVuZE`p zopt6`f_i1&`cjZ~K4+kqV!d%rwm--)$7WOR?UUB(i-lY)OK?T5<1(VX!lYCt0eqe# zo;UU+wp3b<|!$O(z|-P{gZDl_#$SL5BRc z8{jWZeDE24qJ+aXFBy&Rljile6jWuv;o2K9CxX)2(`e#JE37tm$GZ#}weEtswVOimdo_q#+%17-;hjeQ( aP-gMBolnee;0zqJAE*37{91it^Zp0O=h(0S literal 0 HcmV?d00001 diff --git a/Keil.STM32H747I-EVAL_BSP.pdsc b/Keil.STM32H747I-EVAL_BSP.pdsc new file mode 100644 index 0000000..0b7092b --- /dev/null +++ b/Keil.STM32H747I-EVAL_BSP.pdsc @@ -0,0 +1,129 @@ + + + STM32H747I-EVAL_BSP + Keil + STMicroelectronics STM32H7 Series STM32H747I-EVAL Board Support Pack + https://www.keil.com/pack/ + https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP.git + LICENSE + + + + + + + + + Prepared for new CMSIS-Toolbox CubeMX integration + Board description for STM32H747I-EVAL + Blinky example (CMSIS Solution) + Drivers: + - CMSIS-Driver VIO + + + + + + ST + Board Support Pack + STM32H7 + STM32H747I-EVAL + + + + + + + + + + + + + + STMicroelectronics STM32H747I-EVAL Board + + + + + + STMicroelectronics STM32H747I-EVAL Board with CMSIS Driver GPIO + + + + + + + + + I/O implementation for STM32H747I-EVAL + + #define RTE_VIO_BOARD + #define RTE_VIO_STM32H747I_EVAL + + + + + + + + + + + STM32 Evaluation development board with STM32H747XI MCU + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CMSIS-RTOS2 Blinky example with VIO + + + + + + + diff --git a/README.md b/README.md index 7209ca0..defd8d3 100644 --- a/README.md +++ b/README.md @@ -1,2 +1,52 @@ +[![Version](https://img.shields.io/github/v/release/Open-CMSIS-Pack/STM32H747I-EVAL_BSP)](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/releases/latest) +[![License](https://img.shields.io/github/license/Open-CMSIS-Pack/STM32H747I-EVAL_BSP?label)](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/blob/main/LICENSE) +[![Examples Build Test](https://img.shields.io/github/actions/workflow/status/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/Test-Examples.yml?logo=arm&logoColor=0091bd&label=Examples%20Build%20Test)](./.ci) + # STM32H747I-EVAL_BSP -STMicroelectronics STM32H747I-EVAL Board Support Pack + +This is the development repository for the **STMicroelectronics STM32H747I-EVAL Board Support Pack (BSP)** - a CMSIS software pack that is designed to work with all compiler toolchains (Arm Compiler, GCC, IAR, LLVM). It is released as [CMSIS software pack](https://www.keil.arm.com/packs/stm32h747i-eval_bsp-keil) and therefore accessible by CMSIS-Pack enabled software development tools. + +This BSP uses the generator integration of the [CMSIS-Toolbox to Configure STM32 Devices with CubeMX](https://github.com/Open-CMSIS-Pack/cmsis-toolbox/blob/main/docs/CubeMX.md) that is also supported in µVision 5.40 an higher. + +> **Note:** This is currently Work in Progress. Final release is expected in Q3'2024. + +## Repository top-level structure + +Directory | Description +:---------------------------|:-------------- +[.ci](./.ci) | Files that are related to the Continuous Integration (CI) tests of this BSP. +[.github/workflows](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/.github/workflows) | [GitHub Actions](#github-actions) scripts described below. +[CMSIS/Driver](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/CMSIS/Driver) | Contains a [CMSIS-Driver VIO](https://arm-software.github.io/CMSIS_6/latest/Driver/group__vio__interface__gr.html) that is configured for the board peripherals. +[Documents](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/Documents) | [Usage overview](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/Documents/OVERVIEW.md) for examples and board documentation provided by STMicroelectronics. +[Examples/Blinky](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/Examples/Blinky) | Blinky example in *csolution project format* using [CMSIS-Driver VIO](https://arm-software.github.io/CMSIS_6/latest/Driver/group__vio__interface__gr.html) and [CMSIS-Compiler](https://arm-software.github.io/CMSIS-Compiler/main/index.html) for printf I/O retargeting.[ +[Images](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/tree/main/Images) | [Pictures](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/blob/main/Images/stm32h747i-eval_large.png) of the board. + +## Using the development repository + +This development repository can be used in a local directory and [mapped as software pack](https://github.com/Open-CMSIS-Pack/cmsis-toolbox/blob/main/docs/build-tools.md#install-a-repository) using for example `cpackget` with: + + cpackget add /Keil.STM32H747I-EVAL_BSP.pdsc + +## Generate software pack + +The software pack is generated using bash shell scripts. + +- `./gen_pack.sh` based on [Open-CMSIS-Pack/gen-pack](https://github.com/Open-CMSIS-Pack/gen-pack) generates the software pack. +Run this script locally with: + + STM32H747I-EVAL_BSP $ ./gen_pack.sh + +### GitHub Actions + +The repository uses GitHub Actions to generate the pack and build examples: + +- `.github/workflows/pack.yml` based on [Open-CMSIS-Pack/gen-pack-action](https://github.com/Open-CMSIS-Pack/gen-pack-action) generates pack using the [Generate software pack](#generate-software-pack) scripts. +- `.github/workflows/Test-Examples.yml` test build of examples. + +## Issues + +Please feel free to raise an [issue on GitHub](https://github.com/Open-CMSIS-Pack/STM32H747I-EVAL_BSP/issues) +to report misbehavior (i.e. bugs) or start discussions about enhancements. This +is your best way to interact directly with the maintenance team and the community. +We encourage you to append implementation suggestions as this helps to decrease the +workload of the maintenance team. diff --git a/gen_pack.sh b/gen_pack.sh new file mode 100755 index 0000000..5c9a830 --- /dev/null +++ b/gen_pack.sh @@ -0,0 +1,118 @@ +#!/usr/bin/env bash +# Version: 3.0 +# Date: 2023-11-06 +# This bash script generates a CMSIS Software Pack: +# + +set -o pipefail + +# Set version of gen pack library +# For available versions see https://github.com/Open-CMSIS-Pack/gen-pack/tags. +# Use the tag name without the prefix "v", e.g., 0.7.0 +REQUIRED_GEN_PACK_LIB="0.10.0" + +# Set default command line arguments +DEFAULT_ARGS=(-c "v") + +# Pack warehouse directory - destination +# Default: ./output +# +# PACK_OUTPUT=./output + +# Temporary pack build directory, +# Default: ./build +# +# PACK_BUILD=./build + +# Specify directory names to be added to pack base directory +# An empty list defaults to all folders next to this script. +# Default: empty (all folders) +# +PACK_DIRS=" + CMSIS + Documents + Examples + Images +" + +# Specify file names to be added to pack base directory +# Default: empty +# +PACK_BASE_FILES=" + LICENSE +" + +# Specify file names to be deleted from pack build directory +# Default: empty +# +# PACK_DELETE_FILES=" +# +# " + +# Specify patches to be applied +# Default: empty +# +# PACK_PATCH_FILES=" +# +# " + +# Specify addition argument to packchk +# Default: empty +# +# PACKCHK_ARGS=() + +# Specify additional dependencies for packchk +# Default: empty +# +PACKCHK_DEPS=" + ARM.CMSIS.pdsc +" + +# Optional: restrict fallback modes for changelog generation +# Default: full +# Values: +# - full Tag annotations, release descriptions, or commit messages (in order) +# - release Tag annotations, or release descriptions (in order) +# - tag Tag annotations only +# +# PACK_CHANGELOG_MODE="" + +# +# custom pre-processing steps +# +# usage: preprocess +# The build folder +# +function preprocess() { + # add custom steps here to be executed + # before populating the pack build folder + return 0 +} + +# +# custom post-processing steps +# +# usage: postprocess +# The build folder +# +function postprocess() { + # add custom steps here to be executed + # after populating the pack build folder + # but before archiving the pack into output folder + return 0 +} + +############ DO NOT EDIT BELOW ########### + + +# Set GEN_PACK_LIB_PATH to use a specific gen-pack library root +# ... instead of bootstrap based on REQUIRED_GEN_PACK_LIB +if [[ -f "${GEN_PACK_LIB_PATH}/gen-pack" ]]; then + . "${GEN_PACK_LIB_PATH}/gen-pack" +else + . <(curl -sL "https://raw.githubusercontent.com/Open-CMSIS-Pack/gen-pack/main/bootstrap") +fi + +gen_pack "${DEFAULT_ARGS[@]}" "$@" + +exit 0