samltouch

---

SAML Touch Click

SAML Touch Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

---

Click Library

• Author : MikroE Team
• Date : Apr 2020.
• Type : UART GPS/GNSS type

Software Support

Example Description

This example reads and processes data from SAML Touch Clicks.

Example Libraries

• MikroSDK.Board
• MikroSDK.Log
• Click.SamlTouch

Example Key Functions

• samltouch_cfg_setup Config Object Initialization function.

void samltouch_cfg_setup ( samltouch_cfg_t *cfg );

• samltouch_init Initialization function.

err_t samltouch_init ( samltouch_t *ctx, samltouch_cfg_t *cfg );

• samltouch_generic_write Generic write function.

void samltouch_generic_write ( samltouch_t *ctx, char *data_buf, uint16_t len );

• samltouch_generic_read Generic read function.

uint16_t samltouch_generic_read ( samltouch_t *ctx, char *data_buf, uint16_t max_len );

• samltouch_parser Generic parser function.

void samltouch_parser ( char *data_in, samltouch_state_t *state );

Application Init

Initializes driver.

void application_init ( void )
{
    log_cfg_t log_cfg;
    samltouch_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    samltouch_cfg_setup( &cfg );
    SAMLTOUCH_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    samltouch_init( &samltouch, &cfg );
    
    Delay_ms ( 500 );
}

Application Task

Reads the received data and parses it.

void application_task ( void )
{
    parser_application( );
}

Application Output

This Click board can be interfaced and monitored in two ways:

• Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
• UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.

---