Skip to content

Latest commit

 

History

History
113 lines (83 loc) · 3.23 KB

README.md

File metadata and controls

113 lines (83 loc) · 3.23 KB

Microwave 2 Click

Microwave 2 Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

Click Library

  • Author : MikroE Team
  • Date : Feb 2020.
  • Type : UART type

Software Support

Example Description

This application is an accurate and reliable short to medium range motion detection.

Example Libraries

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Microwave2

Example Key Functions

  • microwave2_cfg_setup Config Object Initialization function.
void microwave2_cfg_setup ( microwave2_cfg_t *cfg );
  • microwave2_init Initialization function.
err_t microwave2_init ( microwave2_t *ctx, microwave2_cfg_t *cfg );
  • microwave2_dl_state Set pin DL .
uint8_t microwave2_dl_state ( microwave2_t *ctx );
  • microwave2_da_state Set pin DA.
uint8_t microwave2_da_state ( microwave2_t *ctx );

Application Init

Initializes the Click board for communication.

void application_init ( void )
{
    log_cfg_t log_cfg;
    microwave2_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    microwave2_cfg_setup( &cfg );
    MICROWAVE2_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    microwave2_init( &microwave2, &cfg );
}

Application Task

Data sent from the Click board is captured and different actions are applied.

void application_task ( void )
{
    microwave2_process();
}

Application Output

This Click board can be interfaced and monitored in two ways:

  • Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
  • UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.