GA4 - "Plugin configuration is invalid" #144
Comments
|
Tried in Ubuntu as well, and got a similar error.
... and with debugging set to true:
Error: 'ascii' codec can't decode byte 0xe2 in position 89: ordinal not in range(128) The above exception was the direct cause of the following exception: ╭─────────────────────────────── Traceback (most recent call last) ────────────────────────────────╮ 'ascii' codec can't decode byte 0xe2 in position 89: ordinal not in range(128) |
|
@jeffsdata This sounds like it's probably an issue with your config/meltano rather than this tap. Can you share your meltano.yml with anything sensitive removed? When I googled your error I found this stack overflow answer that seems relevant. https://stackoverflow.com/a/29419477 |
|
Sure, here's the meltano.yml. I haven't done aything to customize this. |
|
I brought the tap-google-analytics repo local and tested it, and that worked fine with my report json and key file. So... it just doesn't seem to be working when I run it with meltano CLI (either by testing it or trying to run it).
|
|
@jeffsdata is that file in the root of your project where that tap is expecting it? Did you check your quotes based on the stack overflow post I linked? That seems related to the error message you were getting. Are you still seeing the same error message? |
|
Yep, the ga4reports file is at the root. I also tried it without that file at all (in which case it uses the default one and I get the same error). I didn't realize... for way too long... but the actual connector works fine, but just the test isn't working. So, not a big deal, haha. And yeah, I also checked for the windows smart quotes as well... I looked for it and it doesn't exist in any of the files - the Google service account file or the report file. |
I am getting an error when following these instructions:
https://hub.meltano.com/extractors/tap-ga4#end_date-setting
I've configured the tap and when I test it or invoke it, it just says:
Plugin configuration is invalid 'utf-8' codec can't decode byte 0x92 in position 89: invalid start byteWhen I put
$env:MELTANO_CLI_LOG_LEVEL="debug", I get a little more info - it looks like it's occurring when listing out the dimensions on the property:Here's the stack trace provided:
C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\meltano\cli\__init__.py:105 in │ │ _run_cli │ │ │ │ 102 │ """ │ │ 103 │ try: │ │ 104 │ │ try: # noqa: WPS225, WPS505 │ │ ❱ 105 │ │ │ cli(obj={"project": None}) │ │ 106 │ │ except ProjectReadonly as err: │ │ 107 │ │ │ raise CliError( │ │ 108 │ │ │ │ f"The requested action could not be completed: {err}", │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\click\core.py:1157 in __call__ │ │ │ │ 1154 │ │ │ 1155 │ def __call__(self, *args: t.Any, **kwargs: t.Any) -> t.Any: │ │ 1156 │ │ """Alias for :meth:main.""" │ │ ❱ 1157 │ │ return self.main(*args, **kwargs) │ │ 1158 │ │ 1159 │ │ 1160 class Command(BaseCommand): │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\meltano\cli\cli.py:43 in main │ │ │ │ 40 │ │ │ args: Positional arguments for the Click group. │ │ 41 │ │ │ kwargs: Keyword arguments for the Click group. │ │ 42 │ │ """ │ │ ❱ 43 │ │ return super().main(*args, windows_expand_args=False, **kwargs) │ │ 44 │ │ 45 │ │ 46 @click.group( │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\click\core.py:1078 in main │ │ │ │ 1075 │ │ try: │ │ 1076 │ │ │ try: │ │ 1077 │ │ │ │ with self.make_context(prog_name, args, **extra) as ctx: │ │ ❱ 1078 │ │ │ │ │ rv = self.invoke(ctx) │ │ 1079 │ │ │ │ │ if not standalone_mode: │ │ 1080 │ │ │ │ │ │ return rv │ │ 1081 │ │ │ │ │ # it's not safe toctx.exit(rv)here! │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\meltano\cli\utils.py:612 in invoke │ │ │ │ 609 │ │ enact_environment_behavior(self.environment_behavior, ctx) │ │ 610 │ │ if ctx.obj.get("tracker"): │ │ 611 │ │ │ ctx.obj["tracker"].add_contexts(CliContext.from_click_context(ctx)) │ │ ❱ 612 │ │ super().invoke(ctx) │ │ 613 │ │ 614 │ │ 615 class InstrumentedDefaultGroup(InstrumentedGroupMixin, DefaultGroup): │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\click\core.py:1688 in invoke │ │ │ │ 1685 │ │ │ │ super().invoke(ctx) │ │ 1686 │ │ │ │ sub_ctx = cmd.make_context(cmd_name, args, parent=ctx) │ │ 1687 │ │ │ │ with sub_ctx: │ │ ❱ 1688 │ │ │ │ │ return _process_result(sub_ctx.command.invoke(sub_ctx)) │ │ 1689 │ │ │ │ 1690 │ │ # In chain mode we create the contexts step by step, but after the │ │ 1691 │ │ # base command has been invoked. Because at that point we do not │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\meltano\cli\utils.py:612 in invoke │ │ │ │ 609 │ │ enact_environment_behavior(self.environment_behavior, ctx) │ │ 610 │ │ if ctx.obj.get("tracker"): │ │ 611 │ │ │ ctx.obj["tracker"].add_contexts(CliContext.from_click_context(ctx)) │ │ ❱ 612 │ │ super().invoke(ctx) │ │ 613 │ │ 614 │ │ 615 class InstrumentedDefaultGroup(InstrumentedGroupMixin, DefaultGroup): │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\click\core.py:1688 in invoke │ │ │ │ 1685 │ │ │ │ super().invoke(ctx) │ │ 1686 │ │ │ │ sub_ctx = cmd.make_context(cmd_name, args, parent=ctx) │ │ 1687 │ │ │ │ with sub_ctx: │ │ ❱ 1688 │ │ │ │ │ return _process_result(sub_ctx.command.invoke(sub_ctx)) │ │ 1689 │ │ │ │ 1690 │ │ # In chain mode we create the contexts step by step, but after the │ │ 1691 │ │ # base command has been invoked. Because at that point we do not │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\meltano\cli\utils.py:661 in invoke │ │ │ │ 658 │ │ if ctx.obj.get("tracker"): │ │ 659 │ │ │ ctx.obj["tracker"].add_contexts(CliContext.from_click_context(ctx)) │ │ 660 │ │ │ ctx.obj["tracker"].track_command_event(CliEvent.started) │ │ ❱ 661 │ │ super().invoke(ctx) │ │ 662 │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\click\core.py:1434 in invoke │ │ │ │ 1431 │ │ │ echo(style(message, fg="red"), err=True) │ │ 1432 │ │ │ │ 1433 │ │ if self.callback is not None: │ │ ❱ 1434 │ │ │ return ctx.invoke(self.callback, **ctx.params) │ │ 1435 │ │ │ 1436 │ def shell_complete(self, ctx: Context, incomplete: str) -> t.List["CompletionItem"]: │ │ 1437 │ │ """Return a list of completions for the incomplete value. Looks │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\click\core.py:783 in invoke │ │ │ │ 780 │ │ │ │ 781 │ │ with augment_usage_errors(__self): │ │ 782 │ │ │ with ctx: │ │ ❱ 783 │ │ │ │ return __callback(*args, **kwargs) │ │ 784 │ │ │ 785 │ def forward( │ │ 786 │ │ __self, __cmd: "Command", *args: t.Any, **kwargs: t.Any # noqa: B902 │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\click\decorators.py:33 in new_func │ │ │ │ 30 │ """ │ │ 31 │ │ │ 32 │ def new_func(*args: "P.args", **kwargs: "P.kwargs") -> "R": │ │ ❱ 33 │ │ return f(get_current_context(), *args, **kwargs) │ │ 34 │ │ │ 35 │ return update_wrapper(new_func, f) │ │ 36 │ │ │ │ C:\Users\jeffc\.local\pipx\venvs\meltano\lib\site-packages\meltano\cli\config.py:393 in test │ │ │ │ 390 │ │ │ 391 │ if not is_valid: │ │ 392 │ │ tracker.track_command_event(CliEvent.failed) │ │ ❱ 393 │ │ raise CliError("\n".join(("Plugin configuration is invalid", detail))) │ │ 394 │ │ │ 395 │ click.secho("Plugin configuration is valid", fg="green") │ │ 396 │ tracker.track_command_event(CliEvent.completed)The text was updated successfully, but these errors were encountered: