-
Notifications
You must be signed in to change notification settings - Fork 140
MIPS Instruction Set
MIPS instructions are grouped by their semantics on this page.
If you want to get a list of instructions sorted by their opcodes, please check our C++ code file
If you want to see instructions in alphabet order, you may want to use MIPS IV reference and MIPS32 reference
MIPS is a RISC processor, so every instruction has the same length — 32 bits (4 bytes). These bits have different meanings according to their displacement. They can be combined in following groups:
Name | Size in bits | Symbol | Used for |
---|---|---|---|
Opcode | 6 | E |
Specification of instruction |
Register specifications | 5 |
s ,t ,d
|
see below |
Register-immediate | 5 | R |
Second part of opcode for RI and CP instructions |
Shamt | 5 | S |
Constant value for shifts |
Immediate constant value | 16 | C |
Immediate value for arithmetic and logical (AL) operations |
Address | 26 | A |
Address for jumps and procedure calls |
Funct | 6 | f |
Second part of opcode for instructions |
Note: Even 26-bit field is called Address, it is never used for loads and stores! |
---|
Additionally, in tables below we may specify values explicitly:
-
0|1
— plain bit values -
-
— ignored values
Register specificators are addresses of registers. They provide numbers of registers have source data and where machine should write result of instruction. MIPS supports instructions with up to 3 registers. They are named:
- s-register (source)
- t-register (target)
- d-register (destination)
Note: s- and t- registers do not correspond to s0-s7 and t0-t7 registers described on MIPS Registers page. Here it is just notation |
---|
Additionally, MIPS RF contains a pair of special registers, HI
and LO
which are used to accumulate results of multiplication and division operations. In some cases they are concatenated to 2x size register notated as [HI, LO]
.
Address of register consists of 5 bits, so there can be 32 usable logical registers on one core.
MIPS supports 5 main types of instruction format: R, I, RI, J, and SPECIAL2
Type | Regs # | Immediate | Instruction bits | Used for |
---|---|---|---|---|
R | 3 | 5 bits |
000000ss sssttttt dddddSSS SSffffff
|
AL and shift operations on registers |
RI | 1 | 16 bits |
000001ss sssRRRRR CCCCCCCC CCCCCCCC
|
Branches |
I | 2 | 16 bits |
EEEEEEss sssttttt CCCCCCCC CCCCCCCC
|
AL operations with immediate values, load/stores, branches |
J | 0 | 26 bits |
EEEEEEAA AAAAAAAA AAAAAAAA AAAAAAAA
|
Unconditional branches, procedure calls |
COP0 | 2 | 5 bits |
010000RR RRRttttt dddddAAA AAAAAAAA
|
Interaction with coprocessor 0 |
Special2 | 3 | 5 bits |
011100ss sssttttt dddddSSS SSffffff
|
MIPS32 extenstions |
Special3 | 3 | 5 bits |
011111ss sssttttt dddddSSS SSffffff
|
MIPS32 secret instructions |
left\right digit | 000 | 001 | 010 | 011 | 100 | 101 | 110 | 111 |
---|---|---|---|---|---|---|---|---|
000 | R | RI | j | jal | beq | bne | blez | bgtz |
001 | addi | addiu | slti | sltiu | andi | ori | xori | lui |
010 | COP0 | COP1 | COP2 | COP1X | beql | bnel | blezl | bgtzl |
011 | daddi | daddiu | ldl | ldr | SPECIAL2 | jalx | SPECIAL3 | |
100 | lb | lh | lwl | lw | lbu | lhu | lwr | lwu |
101 | sb | sh | swl | sw | sdl | sdr | swr | cache |
110 | ll | lwc1 | lwc2 | pref | lld | ldc1 | ldc2 | ld |
111 | sc | swc1 | swc2 | scd | sdc1 | sdc2 | sd |
left\right digit | 000 | 001 | 010 | 011 | 100 | 101 | 110 | 111 |
---|---|---|---|---|---|---|---|---|
000 | sll | movci | srl | sra | sllv | srlv | srav | |
001 | jr | jalr | movz | movn | syscall | break | sync | |
010 | mfhi | mthi | mflo | mfhi | dsllv | dsrlv | dsrav | |
011 | mult | multu | div | divu | dmult | dmultu | ddiv | ddivu |
100 | add | addu | sub | subu | and | or | xor | nor |
101 | slt | sltu | dadd | daddu | dsub | dsubu | ||
110 | tge | tgeu | tlt | tltu | teq | tne | ||
111 | dsll | dslr | dsra | dsll32 | dsrl32 | dsra32 |
left\right digit | 000 | 001 | 010 | 011 | 100 | 101 | 110 | 111 |
---|---|---|---|---|---|---|---|---|
00 | bltz | bgez | bltzl | bgezl | sllv | |||
01 | tgei | jalr | tlti | tltiu | teqi | tnei | ||
10 | bltzal | bgezal | bltzall | bgezall | dsllv | |||
11 | synci |
left\right digit | 000 | 001 | 010 | 011 | 100 | 101 | 110 | 111 |
---|---|---|---|---|---|---|---|---|
00 | mfc0 | mtc0 | ||||||
01 | ||||||||
10 | eret | |||||||
11 |
left\right digit | 000 | 001 | 010 | 011 | 100 | 101 | 110 | 111 |
---|---|---|---|---|---|---|---|---|
000 | madd | maddu | mul | msub | msubu | |||
001 | ||||||||
010 | ||||||||
011 | ||||||||
100 | clz | clo | dclz | dclo | ||||
101 | ||||||||
110 | ||||||||
111 | sdbbp |
All R-type
Name | Syntax | C code | Funct | Full format |
---|---|---|---|---|
add | add $d, $s, $t | d = s + t | 0x20 |
000000ss sssttttt ddddd--- --100000
|
add unsigned | addu $d, $s, $t | d = s + t | 0x21 |
000000ss sssttttt ddddd--- --100001
|
substract | sub $d, $s, $t | d = s - t | 0x22 |
000000ss sssttttt ddddd--- --100010
|
substract unsigned | subu $d, $s, $t | d = s - t | 0x23 |
000000ss sssttttt ddddd--- --100011
|
All I-type
Name | Syntax | C code | Opcode | Full format |
---|---|---|---|---|
add immediate | addi $t, $s, C | t = s + C | 0x8 |
001000ss sssttttt CCCCCCCC CCCCCCCC
|
add immediate unsigned | addiu $t, $s, C | t = s + C | 0x9 |
001001ss sssttttt CCCCCCCC CCCCCCCC
|
All R-type
Name | Syntax | C code | Funct | Full format |
---|---|---|---|---|
multiply | mult $s, $t | [HI, LO] = s * t | 0x18 |
000000ss sssttttt -------- --011000
|
multiply unsigned | multu $s, $t | [HI, LO] = s * t | 0x19 |
000000ss sssttttt -------- --011001
|
divide | div $s, $t | LO = s / t; HI = s % t | 0x1A |
000000ss sssttttt -------- --011010
|
divide unsigned | divu $s, $t | LO = s / t; HI = s % t | 0x1B |
000000ss sssttttt -------- --011011
|
move from HI | mfhi $d | d = HI | 0x10 |
000000-- -------- ddddd--- --010000
|
move to HI | mthi $s | HI = s | 0x11 |
000000ss sss----- -------- --010001
|
move from LO | mflo $d | d = LO | 0x12 |
000000-- -------- ddddd--- --010010
|
move to LO | mtlo $s | LO = s | 0x13 |
000000ss sss----- -------- --010011
|
Special2 type (MIPS32)
Name | Syntax | C code | Funct | Full format |
---|---|---|---|---|
multiply and add | madd $s, $t | [HI, LO] += s * t | 0x00 |
011100ss sssttttt -------- --000000
|
multiply and add unsigned | maddu $s, $t | [HI, LO] += s * t | 0x01 |
011100ss sssttttt -------- --000000
|
multiply to low | mul $d, $s, $t | d = s * t | 0x02 |
011100ss sssttttt ddddd--- --000010
|
multiply and sub | msub $s, $t | [HI, LO] -= s * t | 0x04 |
011100ss sssttttt -------- --000100
|
multiply and sub unsigned | msubu $s, $t | [HI, LO] -= s * t | 0x05 |
011100ss sssttttt -------- --000101
|
All R-type
Name | Syntax | C code | Funct | Full format |
---|---|---|---|---|
shift left logical immediate | sll $d, $t, S | d = t << S | 0x0 |
000000-- ---ttttt dddddSSS SS000000
|
shift right logical immediate | srl $d, $t, S | d = t >> S | 0x2 |
000000-- ---ttttt dddddSSS SS000010
|
shift right arithmetic immediate | sra $d, $t, S | d = (int32)t >> S | 0x3 |
000000-- ---ttttt dddddSSS SS000011
|
shift left logical | sllv $d, $t, $s | d = t << s | 0x4 |
000000ss sssttttt ddddd--- --000100
|
shift right logical | srlv $d, $t, $s | d = t >> s | 0x6 |
000000ss sssttttt ddddd--- --000110
|
shift right arithmetic | srav $d, $t, $s | d = (int32)t >> s | 0x7 |
000000ss sssttttt ddddd--- --000111
|
All R-type
Name | Syntax | C code | Funct | Full format |
---|---|---|---|---|
set on less than | slt $d, $s, $t | d = (s < t) | 0x2A |
000000ss sssttttt ddddd--- --101010
|
set on less than unsigned |
sltu $d, $s, $t | d = (s < t) | 0x2B |
000000ss sssttttt ddddd--- --101011
|
All I-type
Name | Syntax | C code | Opcode | Full format |
---|---|---|---|---|
set on less than immediate |
slti $t, $s, C | t = (s < C) | 0xA |
001010ss sssttttt CCCCCCCC CCCCCCCC
|
set on less than immediate unsigned |
sltiu $t, $s, C | t = (s < C) | 0xB |
001011ss sssttttt CCCCCCCC CCCCCCCC
|
All R-type
Name | Syntax | C code | Funct | Full format |
---|---|---|---|---|
and | and $d, $t, $s | d = s & t | 0x24 |
000000ss sssttttt ddddd--- --100100
|
or | or $d, $t, $s | d = s l t | 0x25 |
000000ss sssttttt ddddd--- --100101
|
xor | xor $d, $t, $s | d = s ^ t | 0x26 |
000000ss sssttttt ddddd--- --100110
|
nor | nor $d, $t, $s | d = ~ (s l t) | 0x27 |
000000ss sssttttt ddddd--- --100111
|
All I-type
Name | Syntax | C code | Opcode | Full format |
---|---|---|---|---|
and with immediate | andi $s, $t, C | t = s & C | 0xC |
001100ss sssttttt CCCCCCCC CCCCCCCC
|
or with immediate | ori $s, $t, C | t = s l C | 0xD |
001101ss sssttttt CCCCCCCC CCCCCCCC
|
xor with immediate | xori $s, $t, C | t = s ^ C | 0xE |
001110ss sssttttt CCCCCCCC CCCCCCCC
|
load upper immediate | lui $t, C | t = C << 16 | 0xF |
001111-- ---ttttt CCCCCCCC CCCCCCCC
|
All I-type
Name | Syntax | PC advance | Opcode | Full format |
---|---|---|---|---|
branch on equal | beq $s, $t, C | PC += 4; if (s == t) PC += (C << 2) |
0x4 |
000100ss sssttttt CCCCCCCC CCCCCCCC
|
branch on not equal | bne $s, $t, C | PC += 4; if (s != t) PC += (C << 2) |
0x5 |
000101ss sssttttt CCCCCCCC CCCCCCCC
|
branch less than or equal than zero |
blez $s, C | PC += 4; if (s <= 0) PC += (C << 2) |
0x6 |
000110ss sss----- CCCCCCCC CCCCCCCC
|
branch greater than zero | bgtz $s, C | PC += 4; if (s > 0) PC += (C << 2) |
0x7 |
000111ss sss----- CCCCCCCC CCCCCCCC
|
All RI-type
Name | Syntax | PC advance | REGIMM | Full format |
---|---|---|---|---|
branch on less than zero | bltz $s, C | PC += 4; if (s < 0) PC += (C << 2); |
0x0 |
000001ss sss00000 CCCCCCCC CCCCCCCC
|
branch on greater than or equal to zero |
bgez $s, C | PC += 4; if (s >= 0) PC += (C << 2); |
0x1 |
000001ss sss00001 CCCCCCCC CCCCCCCC
|
branch on less than zero and link |
bltzal $s, C | PC += 4; if (s < 0) PC += (C << 2); |
0x10 |
000001ss sss10000 CCCCCCCC CCCCCCCC
|
branch on greater than or equal to zero and link |
bgezal $s, C | PC += 4; if (s >= 0) PC += (C << 2); |
0x11 |
000001ss sss10001 CCCCCCCC CCCCCCCC
|
These branches may be assumed as taken by branch prediction unit
All I-type
Name | Syntax | PC advance | Opcode | Full format |
---|---|---|---|---|
branch on equal likely | beql $s, $t, C | PC += 4; if (s == t) PC += (C << 2) |
0x14 |
010100ss sssttttt CCCCCCCC CCCCCCCC
|
branch on not equal likely |
bnel $s, $t, C | PC += 4; if (s != t) PC += (C << 2) |
0x15 |
010101ss sssttttt CCCCCCCC CCCCCCCC
|
branch less than or equal than zero likely |
blezl $s, C | PC += 4; if (s <= 0) PC += (C << 2) |
0x16 |
010110ss sss----- CCCCCCCC CCCCCCCC
|
branch greater than zero likely |
bgtzl $s, C | PC += 4; if (s > 0) PC += (C << 2) |
0x17 |
010111ss sss----- CCCCCCCC CCCCCCCC
|
All RI-type
Name | Syntax | PC advance | REGIMM | Full format |
---|---|---|---|---|
branch on less than zero likely |
bltzl $s, C | PC += 4; if (s < 0) PC += (C << 2); |
0x2 |
000001ss sss00010 CCCCCCCC CCCCCCCC
|
branch on greater than or equal to zero likely |
bgezl $s, C | PC += 4; if (s >= 0) PC += (C << 2); |
0x3 |
000001ss sss00011 CCCCCCCC CCCCCCCC
|
branch on less than zero and link likely |
bltzall $s, C | PC += 4; if (s < 0) PC += (C << 2); |
0x12 |
000001ss sss10010 CCCCCCCC CCCCCCCC
|
branch on greater than or equal to zero and link likely |
bgezall $s, C | PC += 4; if (s >= 0) PC += (C << 2); |
0x13 |
000001ss sss10011 CCCCCCCC CCCCCCCC
|
All J-type
Name | Syntax | C code | PC advance | Opcode | Full format |
---|---|---|---|---|---|
jump | j A | PC = (PC & 0xf0000000) l (A << 2) | 0x2 |
000010AA AAAAAAAA AAAAAAAA AAAAAAAA
|
|
jump and link | jal A | ra = PC + 4 | PC = (PC & 0xf0000000) l (A << 2) | 0x3 |
000011AA AAAAAAAA AAAAAAAA AAAAAAAA
|
All R-type
Name | Syntax | C code | PC advance | Funct | Full format |
---|---|---|---|---|---|
jump register | jr $s | PC = s | 0x8 |
000000ss sss----- -------- --001000
|
|
jump register and link | jalr $s, $d | d = PC + 4 | PC = s | 0x9 |
000000ss sss----- ddddd--- --001001
|
All R-type
Name | Syntax | C code | Funct | Full format |
---|---|---|---|---|
move if zero | movz $d, $s, $t | if (t == 0) d = s | 0xA |
000000ss sssttttt ddddd--- --001010
|
move if not zero | movn $d, $s, $t | if (t != 0) d = s | 0xB |
000000ss sssttttt ddddd--- --001011
|
All I-type unless noted otherwise
Name | Syntax | C code | Opcode | Full format |
---|---|---|---|---|
load byte | lb $t, C($s) | t = *(int8*)(s + C) |
0x20 |
100000ss sssttttt CCCCCCCC CCCCCCCC
|
load half word | lh $t, C($s) | t = *(int16*)(s + C) |
0x21 |
100001ss sssttttt CCCCCCCC CCCCCCCC
|
load word left | lwl $t, C($s) | — | 0x22 |
100010ss sssttttt CCCCCCCC CCCCCCCC
|
load word | lw $t, C($s) | t = *(int32*)(s + C) |
0x23 |
100011ss sssttttt CCCCCCCC CCCCCCCC
|
load byte unsigned | lbu $t, C($s) | t = *(uint8*)(s + C) |
0x24 |
100100ss sssttttt CCCCCCCC CCCCCCCC
|
load half word unsigned | lhu $t, C($s) | t = *(uint16*)(s + C) |
0x25 |
100101ss sssttttt CCCCCCCC CCCCCCCC
|
load word right | lwr $t, C($s) | — | 0x26 |
100010ss sssttttt CCCCCCCC CCCCCCCC
|
Name | Syntax | C code | Opcode | Full format |
---|---|---|---|---|
store byte | sb $t, C($s) | *(uint8*)(s + C) = (t & 0xff) |
0x28 |
101000ss sssttttt CCCCCCCC CCCCCCCC
|
store half | sh $t, C($s) | *(uint16*)(s + C) = (t & 0xffff) |
0x29 |
101000ss sssttttt CCCCCCCC CCCCCCCC
|
store word left |
swl $t, C($s) | — | 0x2A |
101010ss sssttttt CCCCCCCC CCCCCCCC
|
store word | sw $t, C($s) | *(uint32*)(s + C) = t |
0x2B |
101011ss sssttttt CCCCCCCC CCCCCCCC
|
store word right |
swr $t, C($s) | — | 0x2E |
101110ss sssttttt CCCCCCCC CCCCCCCC
|
Name | Syntax | C code | Opcode | Full format |
---|---|---|---|---|
load linked word | ll $t, C($s) | — | 0x30 |
110000ss sssttttt CCCCCCCC CCCCCCCC
|
store conditional | sc $t, C($s) | — | 0x38 |
111000ss sssttttt CCCCCCCC CCCCCCCC
|
Name | Syntax | C code | Opcode | Full format |
---|---|---|---|---|
prefetch | pref H, C($s) | — | 0x33 |
110011ss sssHHHHH CCCCCCCC CCCCCCCC
|
R-type
Name | Syntax | C code | Funct | Full format |
---|---|---|---|---|
syncronization barrier | sync | — | 0xF |
000000-- -------- -----000 00001111
|
All COP0-type
Name | Syntax | C code | Functor | Full format |
---|---|---|---|---|
move to CP0 | mtc0 rt, rd | CP0[rd] = rt | 0x00 |
01000000 000ttttt ddddd--- --------
|
move from CP0 | mfc0 rt, rd | rd = CP0[rt] | 0x04 |
01000000 100ttttt ddddd--- --------
|
exception return | eret | PC = CP0[EPC]; EXL = 0 |
0x10 |
01000010 0000000 00000000 00011000
|
Name | Syntax | PC advance | T | Opcode/Funct | Full format |
---|---|---|---|---|---|
system call | syscall | PC += 4 | R | 0xC |
000000-- -------- -------- --001100
|
breakpoint | break | PC += 4 | R | 0xD |
000000-- -------- -------- --001101
|
All R-type
Name | Syntax | C++ code | Funct | Full format |
---|---|---|---|---|
trap on greater or equal |
tge $s, $t | if (s >= t) throw | 0x30 |
000000ss sssttttt -------- --110000
|
trap on greater or equal unsigned |
tgeu $s, $t | if (s >= t) throw | 0x31 |
000000ss sssttttt -------- --110001
|
trap on less than | tlt $s, $t | if (s < t) throw | 0x32 |
000000ss sssttttt -------- --110010
|
trap on less than unsigned |
tltu $s, $t | if (s < t) throw | 0x33 |
000000ss sssttttt -------- --110011
|
trap on equal | teq $s, $t | if (s == t) throw | 0x34 |
000000ss sssttttt -------- --110100
|
trap on not equal | tne $s, $t | if (s != t) throw | 0x36 |
000000ss sssttttt -------- --110110
|
All RI-type
Name | Syntax | C++ code | REGIMM | Full format |
---|---|---|---|---|
trap on greater than or equal immediate unsigned |
tgei $s, C | if (s >= C) throw | 0x8 |
000001ss sss01000 CCCCCCCC CCCCCCCC
|
trap on greater than or equal immediate unsigned |
tgeiu $s, C | if (s >= C) throw | 0x9 |
000001ss sss01001 CCCCCCCC CCCCCCCC
|
trap on less than immediate |
tlti $s, C | if (s < C) throw | 0xA |
000001ss sss01010 CCCCCCCC CCCCCCCC
|
trap on less than immediate unsigned |
tltiu $s, C | if (s < C) throw | 0xB |
000001ss sss01011 CCCCCCCC CCCCCCCC
|
trap on equal to immediate | teqi $s, C | if (s == C) throw | 0xC |
000001ss sss01100 CCCCCCCC CCCCCCCC
|
trap on not equal to immediate | tnei $s, C | if (s != C) throw | 0xE |
000001ss sss01110 CCCCCCCC CCCCCCCC
|
MIPT-V / MIPT-MIPS — Cycle-accurate pre-silicon simulation.