Skip to content

Latest commit

 

History

History
135 lines (102 loc) · 3.91 KB

README.md

File metadata and controls

135 lines (102 loc) · 3.91 KB
Raw

i3lock

This is my own copy of i3lock, consisting of the following tweaks:

  • Display changes on key-strokes and escape/backspace.
  • Added 12-hour clock to the unlock indicator and periodic updater so time stays relevant.
  • The unlock indicator will always be displayed, regardless of state. (Originally it was only shown after initial keypress)
  • Command line arguments to customize colors. Each (optional) argument will accept a color in hexadecimal format.
    • -o color Specifies verification color
    • -w color Specifies wrong password/backspace color
    • -l color Specifies default/idle color
    • The given colors will be used as-is for the lines and text for their respective states. The colors will automatically be lightened slightly and used with lower opacity (20%) for the circle fill.
    • If no colors are specified it defaults to green/red/black for verify/wrong/idle respectively.

Example Usage

i3lock -i ~/.i3/background.png -c '#000000' -o '#191d0f' -w '#572020' -l '#ffffff' -e

Screenshots

No configuration specified

Default

Error Color

Error

Example Configuration

Idle

Idle state

Key Press

On key press

Escape/Backspace

On escape or backspace

Background in above screenshots can be found in images/background.jpg

Install

Dependencies

Make sure you have the following libraries installed in addition to the packages in the requirements section below.

libxkbcommon-dev libxkbcommon-x11-dev libpam0g-devl

Build

Run the following commands:

git clone https://github.com/Lixxia/i3lock.git
cd i3lock
autoreconf -fi
mkdir -p build && cd build
../configure
make && sudo make install

Original README

i3lock - improved screen locker

i3lock> is a simple screen locker like slock. After starting it, you will see a white screen (you can configure the color/an image). You can return to your screen by entering your password.

Many little improvements have been made to i3lock over time:

  • i3lock forks, so you can combine it with an alias to suspend to RAM (run "i3lock && echo mem > /sys/power/state" to get a locked screen after waking up your computer from suspend to RAM)

  • You can specify either a background color or a PNG image which will be displayed while your screen is locked. Note that i3lock is not an image manipulation software. If you need to resize the image to fill the screen or similar, use existing tooling to do this before passing it to i3lock.

  • You can specify whether i3lock should bell upon a wrong password.

  • i3lock uses PAM and therefore is compatible with LDAP etc. On OpenBSD i3lock uses the bsd_auth(3) framework.

Install

See the i3lock home page.

Requirements

  • pkg-config
  • libxcb
  • libxcb-util
  • libpam-dev
  • libcairo-dev
  • libxcb-xinerama
  • libxcb-randr
  • libev
  • libx11-dev
  • libx11-xcb-dev
  • libxkbcommon >= 0.5.0
  • libxkbcommon-x11 >= 0.5.0

Running i3lock

Simply invoke the 'i3lock' command. To get out of it, enter your password and press enter.

On OpenBSD the i3lock binary needs to be setgid auth to call the authentication helpers, e.g. /usr/libexec/auth/login_passwd.

Building i3lock

We recommend you use the provided package from your distribution. Do not build i3lock unless you have a reason to do so.

First install the dependencies listed in requirements section, then run these commands (might need to be adapted to your OS):

autoreconf --force --install

rm -rf build/
mkdir -p build && cd build/

../configure \
  --prefix=/usr \
  --sysconfdir=/etc \
  --disable-sanitizers

make

Upstream

Please submit pull requests to https://github.com/i3/i3lock