MOES Thermostat Radiator Valve (TRV) TS0601

[inca1980]

I would like share what I have been able to figure out for the MOES Thermostat Radiator Valve (TRV)
I order 6 from Aliexpress and out of all 6 only one was recognized. After a week of learning I found a work around to make the other 5 work. below is TS0601.JS code which I placed on:
/homeassistant/zigbee2mqtt
on my raspbery pi 3 running Home Assistant.
I believe it would work for all the different Manufacturers.

fingerprint: tuya.fingerprint('TS0601', ['_TZE204_9mjy74mp', '_TZE200_9mjy74mp', '_TZE200_aoclfnxz', '_TZE200_ztvwu4nk', '_TZE204_5toc8efa, '_TZE200_5toc8efa', '_TZE200_ye5jkfsb', '_TZE204_aoclfnxz', '_TZE200_u9bfwha0', '_TZE204_u9bfwha0']),`

const` fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend');
const e = exposes.presets;
const ea = exposes.access;
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const definition = [
       {
        fingerprint: tuya.fingerprint('TS0601', ['_TZE204_9mjy74mp', '_TZE200_9mjy74mp']),
        model: 'TRV602',
        vendor: 'Tuya',
        description: 'Thermostatic radiator valve.',
        onEvent: tuya.onEventSetLocalTime,
        fromZigbee: [tuya.fz.datapoints],
        toZigbee: [tuya.tz.datapoints],
        configure: tuya.configureMagicPacket,
        exposes: [
            e.battery(),
            e.child_lock(),
            e.max_temperature(),
            e.min_temperature(),
            e.position(),
            e.window_detection(),
            e.binary('window', ea.STATE, 'CLOSED', 'OPEN').withDescription('Window status closed or open'),
            e.binary('alarm_switch', ea.STATE, 'ON', 'OFF').withDescription('Thermostat in error state'),
            e.climate()
                .withLocalTemperature(ea.STATE)
                .withSetpoint('current_heating_setpoint', 5, 35, 0.5, ea.STATE_SET)
                .withLocalTemperatureCalibration(-30, 30, 0.1, ea.STATE_SET)
                .withPreset(['auto', 'manual', 'off', 'on'], `
                    MANUAL MODE: In this mode, the device executes manual temperature setting. 
                    When the set temperature is lower than the "minimum temperature", the valve is closed (forced closed).
                    AUTO MODE: In this mode, the device executes a preset week programming temperature time and temperature.
                    ON: In this mode, the thermostat stays open.
                    OFF: In this mode, the thermostat stays closed`)
                .withSystemMode(['auto', 'heat', 'off'], ea.STATE)
                .withRunningState(['idle', 'heat'], ea.STATE),
            ...tuya.exposes.scheduleAllDays(ea.STATE_SET, 'HH:MM/C HH:MM/C HH:MM/C HH:MM/C'),
           e.binary('boost_heating', ea.STATE_SET, 'ON', 'OFF')
                .withDescription('Boost Heating: press and hold "+" for 3 seconds, the device will enter the boost heating mode, and the ??? will flash. The countdown will be displayed in the APP'),
            e.numeric('boost_time', ea.STATE_SET).withUnit('min').withDescription('Countdown in minutes')
                .withValueMin(0).withValueMax(1000),
            e.enum('display_brightness', ea.STATE_SET, ['high', 'medium', 'low']).withDescription('Display brightness'),
            e.enum('screen_orientation', ea.STATE_SET, ['up', 'right', 'down', 'left']).withDescription('Screen orientation'),
            e.enum('mode', ea.STATE_SET, ['comfort', 'eco'])
                .withDescription(
                    'Hysteresis - comfort > switches off/on exactly at reached ' + 'temperature with valve smooth from 0 to 100%, eco > 0.5 degrees above or below, valve either 0 or 100%',),
        ],
        meta: {
tuyaDatapoints: [
                [1, null, tuya.valueConverter.
                thermostatSystemModeAndPreset(null)],
                [1, 'system_mode', tuya.valueConverter.
                thermostatSystemModeAndPreset('system_mode')],
                [1, 'preset', tuya.valueConverter.
                thermostatSystemModeAndPreset('preset')],
                [2, 'current_heating_setpoint', tuya.valueConverter.divideBy10],
                [3, 'local_temperature', tuya.valueConverter.divideBy10],
                [6, 'running_state', tuya.valueConverterBasic.
                lookup({heat: 1, idle: 0})],
                [7, 'window', tuya.valueConverterBasic.
                lookup({OPEN: 1, CLOSE: 0})],
                [8, 'window_detection', tuya.valueConverter.onOff],
                [12, 'child_lock', tuya.valueConverter.lockUnlock],
                [13, 'battery', tuya.valueConverter.raw],
                [14, 'alarm_switch', tuya.valueConverter.onOff],
                [15, 'min_temperature', tuya.valueConverter.divideBy10],
                [16, 'max_temperature', tuya.valueConverter.divideBy10],
                [17, 'schedule_monday', tuya.valueConverter.
                thermostatScheduleDayMultiDPWithDayNumber(1)],
                [18, 'schedule_tuesday', tuya.valueConverter.
                thermostatScheduleDayMultiDPWithDayNumber(2)],
                [19, 'schedule_wednesday', tuya.valueConverter.
                thermostatScheduleDayMultiDPWithDayNumber(3)],
                [20, 'schedule_thursday', tuya.valueConverter.
                thermostatScheduleDayMultiDPWithDayNumber(4)],
                [21, 'schedule_friday', tuya.valueConverter.
                thermostatScheduleDayMultiDPWithDayNumber(5)],
                [22, 'schedule_saturday', tuya.valueConverter.
                thermostatScheduleDayMultiDPWithDayNumber(6)],
                [23, 'schedule_sunday', tuya.valueConverter.
                thermostatScheduleDayMultiDPWithDayNumber(7)],
                [37, 'boost_heating', tuya.valueConverter.onOff],
                [38, 'boost_time', tuya.valueConverter.countdown],
                [101, 'local_temperature_calibration', tuya.valueConverter.
                localTempCalibration1],
                [108, 'position', tuya.valueConverter.divideBy10],
                [111, 'display_brightness', tuya.valueConverterBasic.
                lookup({high: tuya.enum(0), medium: tuya.enum(1), low: tuya.enum(2)})],
                [113, 'screen_orientation', tuya.valueConverterBasic.lookup({ up: tuya.enum(0), right: tuya.enum(1), down: tuya.enum(2), left: tuya.enum(3)})],
                [114, 'mode', tuya.valueConverterBasic.lookup({comfort: tuya. enum(0), eco: tuya.enum(1)})],
              ],
        },
    },
];
module.exports = definition;

[lrljoe]

The TS601/TS0601 should work out of the box without any need to mess with anything.

[inca1980]

That is what I was hoping for. However, I exspirierend the opposite. I think it has to do with the different manufacturer names, the ones that were not recognized by the system were: '_TZE204_9mjy74mp', '_TZE200_9mjy74mp'

[ariewtf]

Different model names:

MODELS_INFO: [
("_TZE200_a4bpgplm", "TS0601"),
("_TZE200_dv8abrrz", "TS0601"),
("_TZE200_z1tyspqw", "TS0601"),
("_TZE200_rtrmfadk", "TS0601"),
],

ZHA quirk i'm using:
https://github.com/ariewtf/zha_quirks/blob/main/ts0601_trv_rtitek2.py

i think i've seen a z2mqtt thing out here but i couldn't find it this quickly.

[Tu4r3g21]

Hi,

i have also TS0601 TRVs that are manufactured by _TZE204_ogx8u5z6, but i had no luck just adding them to the fingerprint section of your external converter file.
Keeping my fingers crossed, that someone else with higher knowledge of this topic might add them at some point, otherwise the stack of five that i bought remain useless.