Error message when trying to use OTA function

[Vinterbird]

Hi!

I'm getting an error message from Z2M when trying to use the OTA function to update devices. I'm running a Home Assistant Yellow, and am really hoping someone can help me understand what the error is and how to fix it.

error 2024-11-08 13:30:26zh:ember:uart:ash: Received ERROR from adapter, with code=ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT.
error 2024-11-08 13:30:26zh:ember:uart:ash: ASH disconnected | Adapter status: ASH_NCP_FATAL_ERROR
error 2024-11-08 13:30:26zh:ember:uart:ash: Error while parsing received frame, status=ASH_NCP_FATAL_ERROR.
error 2024-11-08 13:30:26zh:ember: Adapter fatal error: HOST_FATAL_ERROR
error 2024-11-08 13:30:26z2m: Adapter disconnected, stopping
error 2024-11-08 13:31:45z2m: Failed to configure '0xf4b3b1fffe66dbab', attempt 1 (Error: ZCL command 0xf4b3b1fffe66dbab/8 genPowerCfg.configReport([{"attribute":"batteryPercentageRemaining","minimumReportInterval":3600,"maximumReportInterval":65000,"reportableChange":0}], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed ({"target":58762,"apsFrame":{"profileId":260,"clusterId":1,"sourceEndpoint":1,"destinationEndpoint":8,"options":4416,"groupId":0,"sequence":180},"zclSequence":110,"commandIdentifier":7} timed out after 10000ms) at Object.start (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/oneWaitress.ts:195:23) at EmberOneWaitress.startWaitingFor (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/oneWaitress.ts:219:50) at /app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:2131:55 at Queue.execute (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:36:20) at EmberAdapter.sendZclFrameToEndpoint (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:2070:16) at Request.send (/app/node_modules/zigbee-herdsman/src/controller/helpers/request.ts:82:20) at Endpoint.sendRequest (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:325:20) at Endpoint.zclCommand (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:951:28) at Endpoint.configureReporting (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:688:9) at Object.batteryPercentageRemaining (/app/node_modules/zigbee-herdsman-converters/src/lib/reporting.ts:56:5))

[triosniolin]

I'm having the same problem, with a Sonoff ZBDongle-E. Some devices I can do the OTA just fine, but some cause the above errors a few seconds into the OTA update.

[Koenkk]

You may want to try the 8.0.2 firmware.

[andressoler]

Hi all...

Tested with

• FW 7.4.4, 7.4.5 and 8.0.2...
• Z2M last and stable version
• Z2M dev branch

Same error trying to upgrade IKEA INSPELNING Smart plug...

2025-01-02 18:06:31zh:ember:uart:ash: Received ERROR from adapter, with code=ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT.
2025-01-02 18:06:31zh:ember:uart:ash: ASH disconnected | Adapter status: ASH_NCP_FATAL_ERROR
2025-01-02 18:06:31zh:ember:uart:ash: Error while parsing received frame, status=ASH_NCP_FATAL_ERROR.
2025-01-02 18:06:31zh:ember: Adapter fatal error: HOST_FATAL_ERROR
2025-01-02 18:06:40zh:ember:ezsp: ERROR Transaction failure; status=ASH_ERROR_TIMEOUTS. Last Frame: [FRAME: ID=52:"SEND_UNICAST" Seq=50 Len=10].
2025-01-02 18:07:03z2m: Adapter disconnected, stopping

Any ideas?

[triosniolin]

I am also having these exact errors, even after updating to 8.2.2.

[Koenkk]

Could you try changing the baudrate? see #25294 (comment) for more info

[triosniolin]

I reflashed my ZBDongle-E to 7.4.5 at 230400 and I was able to update one device, however, when updating the firmware on a second device I once again received these messages and the OTA failed:

error 2025-01-03 15:41:41zh:ember:uart:ash: Received ERROR from adapter, with code=ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT.
error 2025-01-03 15:41:41zh:ember:uart:ash: ASH disconnected | Adapter status: ASH_NCP_FATAL_ERROR
error 2025-01-03 15:41:41zh:ember:uart:ash: Error while parsing received frame, status=ASH_NCP_FATAL_ERROR.
error 2025-01-03 15:41:41zh:ember: Adapter fatal error: HOST_FATAL_ERROR
info 2025-01-03 15:41:41zh:ember:uart:ash: ASH COUNTERS since last clear:
info 2025-01-03 15:41:41zh:ember:uart:ash: Total frames: RX=1288, TX=1727
info 2025-01-03 15:41:41zh:ember:uart:ash: Cancelled : RX=0, TX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: DATA frames : RX=1280, TX=437
info 2025-01-03 15:41:41zh:ember:uart:ash: DATA bytes : RX=29807, TX=33197
info 2025-01-03 15:41:41zh:ember:uart:ash: Retry frames: RX=6, TX=3
info 2025-01-03 15:41:41zh:ember:uart:ash: ACK frames : RX=0, TX=1286
info 2025-01-03 15:41:41zh:ember:uart:ash: NAK frames : RX=0, TX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: nRdy frames : RX=0, TX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: CRC errors : RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: Comm errors : RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: Length < minimum: RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: Length > maximum: RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: Bad controls : RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: Bad lengths : RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: Bad ACK numbers : RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: Out of buffers : RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: Retry dupes : RX=6
info 2025-01-03 15:41:41zh:ember:uart:ash: Out of sequence : RX=0
info 2025-01-03 15:41:41zh:ember:uart:ash: ACK timeouts : RX=3
error 2025-01-03 15:41:49zh:ember:ezsp: ERROR Transaction failure; status=ASH_ERROR_TIMEOUTS. Last Frame: [FRAME: ID=52:"SEND_UNICAST" Seq=179 Len=7].
error 2025-01-03 15:41:49zh:ember:ezsp: ERROR Transaction failure; status=ASH_ERROR_TIMEOUTS. Last Frame: [FRAME: ID=52:"SEND_UNICAST" Seq=179 Len=7].
info 2025-01-03 15:42:11zh:ember:uart:ash: Port closed.
info 2025-01-03 15:42:11zh:ember:uart:ash: ======== ASH stopped ========
info 2025-01-03 15:42:11zh:ember:ezsp: ======== EZSP stopped ========
info 2025-01-03 15:42:11zh:ember: ======== Ember Adapter Stopped ========
error 2025-01-03 15:42:11z2m: Adapter disconnected, stopping

So far I have tried 7.4.4 and 7.4.5 at 115,200; 8.2.2 at 115,200; and 7.4.5 at 230,400.

[andressoler]

The same story here...

I reflashed my ZBDongle-E to 7.4.5 at 230400 and I was able to update one device (for the first time, I must say)... Failed with second device...