You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I am trying to implement the dual arm(Gen3-6DOF) using this kortex_dual_driver.launch file from the kortex_driver package. This below command is used to launch
there are no problem or error shown in the terminal, and i can plan and execute the robot using the motion_planning in the rviz.
and i can see this parameter /terminator/robot_description_semantic in the rosparam list. And that robot_description_sematic located the srdf file in this location.
This document was autogenerated by xacro from /home/pc/kinova_ws/src/ros_kortex/kortex_move_it_config/gen3_move_it_config/config/6dof/gen3.srdf.xacro\
I added this below line in the kortex_dual_driver.launch file to locate the gen3.srdf.xacro file <param name = "robot_description_semantic" command="$(find xacro)/xacro --inorder $(find gen3_move_it_config)/config/$(arg left_dof)dof/gen3.srdf.xacro"/>
ended up the error like this
[ INFO] [1721049394.820901460]: The Kortex driver has been initialized correctly!
[ INFO] [1721049394.859203822]: Kortex Driver's services initialized correctly.
[ INFO] [1721049394.859276375]: -------------------------------------------------
[ INFO] [1721049394.874494511]: The Kortex driver has been initialized correctly!
[ERROR] [1721049416.863728332]: Semantic description is not specified for the same robot as the URDF
[ERROR] [1721049416.863820634]: Joint 'joint_1' declared as part of group 'arm' is not known to the URDF
[ERROR] [1721049416.863845383]: Joint 'joint_2' declared as part of group 'arm' is not known to the URDF
[ERROR] [1721049416.863863092]: Joint 'joint_3' declared as part of group 'arm' is not known to the URDF
[ERROR] [1721049416.863879900]: Joint 'joint_4' declared as part of group 'arm' is not known to the URDF
[ERROR] [1721049416.863895998]: Joint 'joint_5' declared as part of group 'arm' is not known to the URDF
[ERROR] [1721049416.863912831]: Joint 'joint_6' declared as part of group 'arm' is not known to the URDF
[ERROR] [1721049416.863929833]: Joint 'end_effector' declared as part of group 'arm' is not known to the URDF
[ERROR] [1721049416.863952865]: Joint 'tool_frame_joint' declared as part of group 'arm' is not known to the URDF
[ WARN] [1721049416.863975969]: Group 'arm' is empty.
[ERROR] [1721049416.864039700]: Joint 'joint_1' declared as part of group state 'home' is not known to the URDF
[ERROR] [1721049416.864059248]: Joint 'joint_2' declared as part of group state 'home' is not known to the URDF
[ERROR] [1721049416.864077404]: Joint 'joint_3' declared as part of group state 'home' is not known to the URDF
[ERROR] [1721049416.864095063]: Joint 'joint_4' declared as part of group state 'home' is not known to the URDF
[ERROR] [1721049416.864112010]: Joint 'joint_5' declared as part of group state 'home' is not known to the URDF
[ERROR] [1721049416.864129047]: Joint 'joint_6' declared as part of group state 'home' is not known to the URDF
[ERROR] [1721049416.864168700]: Joint 'joint_1' declared as part of group state 'retract' is not known to the URDF
[ERROR] [1721049416.864188027]: Joint 'joint_2' declared as part of group state 'retract' is not known to the URDF
[ERROR] [1721049416.864205447]: Joint 'joint_3' declared as part of group state 'retract' is not known to the URDF
[ERROR] [1721049416.864222252]: Joint 'joint_4' declared as part of group state 'retract' is not known to the URDF
[ERROR] [1721049416.864238999]: Joint 'joint_5' declared as part of group state 'retract' is not known to the URDF
[ERROR] [1721049416.864255795]: Joint 'joint_6' declared as part of group state 'retract' is not known to the URDF
[ERROR] [1721049416.864275765]: Joint 'joint_1' declared as part of group state 'vertical' is not known to the URDF
[ERROR] [1721049416.864294924]: Joint 'joint_2' declared as part of group state 'vertical' is not known to the URDF
[ERROR] [1721049416.864312055]: Joint 'joint_3' declared as part of group state 'vertical' is not known to the URDF
[ERROR] [1721049416.864329192]: Joint 'joint_4' declared as part of group state 'vertical' is not known to the URDF
[ERROR] [1721049416.864347258]: Joint 'joint_5' declared as part of group state 'vertical' is not known to the URDF
[ERROR] [1721049416.864364374]: Joint 'joint_6' declared as part of group state 'vertical' is not known to the URDF
[ WARN] [1721049416.864426797]: Link 'base_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864445854]: Link 'base_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864463686]: Link 'base_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864481334]: Link 'bicep_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864505303]: Link 'bicep_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864524298]: Link 'bicep_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864542833]: Link 'bracelet_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864560704]: Link 'bracelet_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864577680]: Link 'bracelet_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864594032]: Link 'forearm_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864610404]: Link 'forearm_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864627350]: Link 'forearm_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864644754]: Link 'shoulder_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049416.864662746]: Link 'spherical_wrist_1_link' is not known to URDF. Cannot disable/enable collisons.
[ WARN] [1721049417.040841661]: Group 'arm' must have at least one valid joint
[ WARN] [1721049417.040873158]: Failed to add group 'arm'
[ERROR] [1721049417.040891699]: Group state 'home' specified for group 'arm', but that group does not exist
[ERROR] [1721049417.040896979]: Group state 'retract' specified for group 'arm', but that group does not exist
[ERROR] [1721049417.040901459]: Group state 'vertical' specified for group 'arm', but that group does not exist
so what do i have to do, to implement the dual arm working using the kortex_dual_driver.launch file? This is urgent. Awaiting your response as soon as possible.
Regards
K.S.Vasanth
The text was updated successfully, but these errors were encountered:
We will be investigating the specifics of your issue as soon as we have time. In the meantime, have you looked at the bugfix/dual-arm-melodic branch published for issue #253 ? I understand you probably do not want to downgrade to Melodic, but you can use the code as a reference. Since you mention your issue is urgent, this is the best I can propose until we can replicate your issue.
Hi @Vasanth28897 ,
Please refer to the pull request: #331
The added modifications will allow you to command two Gen3 robotic arms with no grippers and with the same dof (6 or 7).
Please do not hesitate to reach out for further questions
I am trying to implement the dual arm(Gen3-6DOF) using this
kortex_dual_driver.launch
file from thekortex_driver
package. This below command is used to launchGetting this error after add the
moveit_ros_visualisation
topic in the rvizwhen i tried executing just kortex_driver.launch using this command
roslaunch kortex_driver kortex_driver.launch ip_address:=192.168.1.10 robot_name:=terminator dof:=6
there are no problem or error shown in the terminal, and i can plan and execute the robot using the motion_planning in the rviz.
and i can see this parameter
/terminator/robot_description_semantic
in the rosparam list. And that robot_description_sematic located the srdf file in this location.This document was autogenerated by xacro from /home/pc/kinova_ws/src/ros_kortex/kortex_move_it_config/gen3_move_it_config/config/6dof/gen3.srdf.xacro\
I added this below line in the
kortex_dual_driver.launch
file to locate thegen3.srdf.xacro
file<param name = "robot_description_semantic" command="$(find xacro)/xacro --inorder $(find gen3_move_it_config)/config/$(arg left_dof)dof/gen3.srdf.xacro"/>
ended up the error like this
so what do i have to do, to implement the dual arm working using the
kortex_dual_driver.launch
file? This is urgent. Awaiting your response as soon as possible.Regards
K.S.Vasanth
The text was updated successfully, but these errors were encountered: