6.13-rc1 can boot

[hakotani-o]

6.13-rc1 can boot.
But audio not work.

[jimmyhon]

Are you trying to use the es8388 (analog audio) on the Orange Pi 5?

If so, you'll want to open up alsamixer and toggle on the Headphone widget.

[hakotani-o]

Thank you for your interest.
Yes,i want to use es8388(analog audio).
I try alsamixer , there was no sound.

Thank you.

[stevepringle]

How did you go about building this? Some instructions would be great if you wouldn’t mind sharing your knowledge. :-)

[hakotani-o]

Thank you for your interest.
Attached is a file summarizing the steps.
build.txt

Thank you.

[stevepringle]

Many thanks for that. I’ll give it a go this weekend if I get chance :-)

[nobara256]

@hakotani-o Thank you so much for giving a simple build procedure, I was able to successfully build the upstream kernel for the first time.

[hakotani-o]

Thank you for trying out my build script.
Please modify the contents of () for the kernel version.

# set version
cat << EOF > debian.rockchip/changelog
linux-rockchip (6.13.0-rc3.20241221) oracular; urgency=medium

*Initial release.

-- Your name [email protected] Wed, 11 Dec 2024 20:48:48 +0900
EOF

[stevepringle]

Thank you for your script, I have managed to build the kernel (6.13.0-rc4). How do I get hold of the build scripts to build an Ubuntu release for oracular (the ones I have form Joshuas site dont include oracular)

[hakotani-o]

How to create a disk image.

1.Install build tools. ( It may contain things you don't need. )
sudo apt-get install -y build-essential gcc-aarch64-linux-gnu bison \
qemu-user-static qemu-system-arm qemu-efi-aarch64 u-boot-tools binfmt-support \
debootstrap flex libssl-dev bc rsync kmod cpio xz-utils fakeroot parted \
udev dosfstools uuid-runtime git-lfs device-tree-compiler python3 \
python-is-python3 fdisk bc debhelper python3-pyelftools python3-setuptools \
python3-pkg-resources swig libfdt-dev libpython3-dev \
git fakeroot build-essential ncurses-dev xz-utils libssl-dev bc flex libelf-dev bison gawk

2.ubuntu-rockchip build tool download.
git clone --depth=1 https://github.com/Joshua-Riek/ubuntu-rockchip.git

3.run build.sh
  cd ubuntu-rockchip
  mkdir build
  cp kernel-image-files build

# Please change --board=Your board.
sudo ./build.sh --board=orangepi-5-plus --suite=oracular --flavor=desktop

4.If the build is successful
The disk image files are present in the "images" directory.

Thank you.

[stevepringle]

Many thanks, that’s just what I needed:-)

[hakotani-o]

Hello.
I have created a build script for ubuntu mainline.

1. run.sh setup
   Two scripts are run.
   The parameters are
   working directory name board type dtb filename.

2. The disk image is created in the images directory.

3. The kernel version is tested with torvalds v6.13-rc3.
   You can specify the kernel version by changing the parameter git clone -b in u-bootstrap.sh.
   The kernel configuration file is overlay/config.common.ubuntu.
   Note that the cpu temperature will be high during kernel build.

4. Operation was confirmed by writing the disk image to SD-CARD and booting.
   It takes less than 1 minute until the screen appears.
   It also supports grub boot with edk2-rk3588, but the grub menu did not appear unless the ESC key is pressed.

5. The snap application is not installed.
   Please install it after boot.

The contents of this script are mostly based on
copied from Joshua Riek's build system.
Thanks to Joshua Riek.

ubuntu-mainline.tar.gz
Thank you.

[nobara256]

Have you checked the GPU status on 6.13.0-rc4? I can see the CONFIG_DRM_PANTHOR=m and CONFIG_DRM_GPUVM=m properly configured under debian.rockchip/config/config.common.ubuntu. But my server images don't seem to have panthor working as intended. In vulkaninfo I can still see it as llvmpipe. Maybe I am missing something in the server images or something requires to be added in the device-tree?

[hakotani-o]

Sorry for the late reply.
Thank you for providing such great information.
If you install the graphic driver from below, it will be recognized as Mali-G610 Panfrost.
https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers

As for stability, I have no information.
The kernel is also under development, so if you're feeling adventurous, give it a try.

Thank you.

[nobara256]

Thanks, I can finally see some relevant output.

Instance Layers: count = 2
--------------------------
VK_LAYER_MESA_device_select Linux device selection layer 1.4.303  version 1
VK_LAYER_MESA_overlay       Mesa Overlay layer           1.4.303  version 1

Devices:
========
GPU0:
	apiVersion         = 1.0.303
	driverVersion      = 25.0.0
	vendorID           = 0x13b5
	deviceID           = 0xa8670000
	deviceType         = PHYSICAL_DEVICE_TYPE_INTEGRATED_GPU
	deviceName         = Mali-G610 (Panfrost)
	driverID           = DRIVER_ID_MESA_PANVK
	driverName         = panvk
	driverInfo         = Mesa 25.0~git2412310600.e112e2~oibaf~o (git-e112e2b 2024-12-31 oracular-oibaf-ppa)
	conformanceVersion = 0.0.0.0
GPU1:
	apiVersion         = 1.3.303
	driverVersion      = 0.0.1
	vendorID           = 0x10005
	deviceID           = 0x0000
	deviceType         = PHYSICAL_DEVICE_TYPE_CPU
	deviceName         = llvmpipe (LLVM 19.1.1, 128 bits)
	driverID           = DRIVER_ID_MESA_LLVMPIPE
	driverName         = llvmpipe
	driverInfo         = Mesa 25.0~git2412310600.e112e2~oibaf~o (git-e112e2b 2024-12-31 oracular-oibaf-ppa) (LLVM 19.1.1)
	conformanceVersion = 1.3.1.1
	deviceUUID         = 6d657361-3235-2e30-7e67-697432343100
	driverUUID         = 6c6c766d-7069-7065-5555-494400000000

GPU0 does appear as Mali-G610 (Panfrost) and even that as a PHYSICAL_DEVICE_TYPE_INTEGRATED_GPU. Although the apiVersion seems to be ancient, I think it's a great start.

Thank you so much.

[hakotani-o]

I updated ubuntu-mainline.tar.xz because an error occurred with add-apt-repository.

ubuntu-mainline.tar.gz