TODO

Rewrite Weather TCL code, use file for last used (don't run if data isn't fresh)
Add Script for adding Weather to CronTab

Backup Scripts
Restore Scripts

Prune QSO Folder x Days

Log Rotate for svxlink logs

Prune for svxlink logs x days/months


iwconfig wlx18d6c71c0727 essid CloudCoders key s:C@lm@t078
 dhclient wlx18d6c71c0727

iwconfig wlx18d6c71c0727 essid CELL_C_7C43 key s:5N8VOTK4
nmcli connection add type wifi con-name outofrange ssid CELL_C_7C43 802-11-wireless-security.key-mgmt WPA-PSK 802-11-wireless-security.psk 5N8VOTK4
nmcli device wifi con "CELL_C_7C43" password "5N8VOTK4"
nmcli device wifi con "CloudCoders" password "C@lm@t078"



You'll find a known to be working driver on this github:
https://github.com/lwfinger/rtl8188eu

First, undo what you did with provided CD
Then install the driver from github:

# Prepare
sudo apt update
sudo apt-get install -f
sudo apt-get dist-upgrade
sudo apt-get -y install dkms build-essential git

# Go install the driver 
mkdir ~/DriverBuild
cd ~/DriverBuild
git clone https://github.com/lwfinger/rtl8188eu.git
sudo dkms add ./rtl8188eu
sudo dkms build 8188eu/1.0
sudo dkms install 8188eu/1.0
reboot
If the network manager says: "Device is not ready"
Make sure you copied the firmware (rtl8188eufw.bin) to /lib/firmware/rtlwifi/



wlx18d6c71c0727 Link encap:Ethernet  HWaddr 18:d6:c7:1c:07:27
          inet addr:192.168.0.165  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1896 errors:0 dropped:302 overruns:0 frame:0
          TX packets:120 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:279744 (279.7 KB)  TX bytes:23780 (23.7 KB)


wlx18d6c71c0727  IEEE 802.11bgn  ESSID:"CloudCoders"  Nickname:"<WIFI@REALTEK>"
          Mode:Managed  Frequency:2.417 GHz  Access Point: D8:07:B6:D8:09:E5
          Bit Rate:72.2 Mb/s   Sensitivity:0/0
          Retry:off   RTS thr:off   Fragment thr:off
          Encryption key:****-****-****-****-****-****-****-****   Security mode:open
          Power Management:off
          Link Quality=91/100  Signal level=62/100  Noise level=0/100
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

lo        no wireless extensions.





/var/spool/cron/crontabs/root

*/58 */1 * * * /usr/share/eiab/scripts/weather/getweather.sh


git clone https://github.com/JGPorteous/eiab.git /usr/share/eiab/
cd /usr/share/eiab/
chmod +x ./scripts/*.sh
for d in /usr/share/eiab/scripts/; do
 echo $d
done
cp ./files/etc/pdmenurc /etc/pdmenurc




LOGS 
root@eiab-sandton-vhf:/var/log/svxlink# cat /etc/logrotate.d/svxlink
dateext
dateformat -%Y%m%d

/var/log/svxlink/* {
    daily
    size 1k
    rotate 100
    create 644 svxlink svxlink
    missingok
    compress
}


test logs
logrotate /etc/logrotate.conf






DEFAULTS
root@eiab-sandton-vhf:/var/log/svxlink# cat /etc/default/svxlink
#############################################################################
#
# Configuration file for the SvxLink Systemd unit file
#
#############################################################################

# The user to run the SvxLink server as
RUNASUSER=svxlink

# Specify which configuration file to use
CFGFILE=/etc/svxlink/svxlink.conf

# Where to place the log file
LOGFILE=/var/log/svxlink/svxlink

# Where to place the PID file
PIDFILE=/run/svxlink.pid

# Disable Alsa zerofill if set to 0 (see manual page)
#ASYNC_AUDIO_ALSA_ZEROFILL=1