.gitlab-ci.yml

stages:
  - style-check
  - build
  - coverage
  - analysis
  - deploy
  - report

cache:
  paths:
    - _ccache/

variables:
  FEDORA_IMAGE: "registry.gitlab.gnome.org/gnome/glib/fedora:v39.5"
  COVERITY_IMAGE: "registry.gitlab.gnome.org/gnome/glib/coverity:v7"
  DEBIAN_IMAGE: "registry.gitlab.gnome.org/gnome/glib/debian-stable:v23"
  DEBIAN_I386_IMAGE: "registry.gitlab.gnome.org/gnome/glib/debian-stable-i386:v2"
  ALPINE_IMAGE: "registry.gitlab.gnome.org/gnome/glib/alpine:v7"
  MINGW_IMAGE: "registry.gitlab.gnome.org/gnome/glib/mingw:v39.5"
  GOBJECT_INTROSPECTION_TAG: "1.80.1"
  MESON_TEST_TIMEOUT_MULTIPLIER: 4
  G_MESSAGES_DEBUG: all
  MESON_COMMON_OPTIONS: "--buildtype debug --wrap-mode=nodownload --fatal-meson-warnings"

# Default CI job setup; contrast with `.only-origin`.
#
# Don’t execute the pipeline when a merge request is merged into `origin/main`,
# as it will have already been tested
.only-default:
  only:
    - branches
  except:
    refs:
      - tags
    variables:
      - $CI_PIPELINE_SOURCE == "push" && $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH && $CI_PROJECT_NAMESPACE == "GNOME"

# As above, but does get executed on merge into `origin/main`. For use with
# updating code coverage results and docs builds.
.only-default-and-merges:
  only:
    - branches
  except:
    refs:
      - tags

# Some jobs run on CI runners which don’t have good isolation between CI jobs,
# and don’t have much available resource. Limit those jobs to only ones on the
# origin repository (GNOME/glib), rather than people’s forks. Code in the origin
# repository can be trusted.
.only-origin:
  only:
    - branches@GNOME/glib
  except:
    - tags

# Some jobs take a long time and are unlikely to find failures (or will find
# failures which are not merge-blockers to fix), so they’re executed on a weekly
# schedule in order to save CI resources and speed up branch pipelines.
.only-schedules:
  only:
    - schedules
  except:
    - tags

# Some jobs take a long time and are unlikely to find failures (or will find
# failures which are not merge-blockers to fix), so they’re executed on a weekly
# schedule in order to save CI resources and speed up branch pipelines.
# But for specific merge requests, one may still want to run them, so make
# possible to run them manually.
.only-schedules-or-manual:
  rules:
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"
      when: never
    # As per rule before, the following rules will only apply to non MR events
    - if: $CI_PIPELINE_SOURCE == "schedule"
      when: always
    - if: $CI_PIPELINE_SOURCE != "schedule"
      when: manual
      allow_failure: true

# Some jobs should be runnable only on schedules and when triggered by a branch
# in the origin repository, but without
.only-schedules-or-manual-in-default-branch:
  rules:
    - if: $CI_PROJECT_PATH != "GNOME/glib" || $CI_COMMIT_BRANCH != $CI_DEFAULT_BRANCH
      when: never
    # As per rule before, the following rules will apply only to GNOME/glib:main
    - if: $CI_PIPELINE_SOURCE == "schedule"
      when: always
    - if: $CI_PIPELINE_SOURCE != "schedule"
      when: manual
      allow_failure: true

# Some jobs run on CI runners don’t have much available resource.
# Limit those jobs to only ones on the origin repository (GNOME/glib),
# rather than people’s forks or if ran manually.
.only-origin-or-manual:
  rules:
    - if: $CI_PIPELINE_SOURCE == "merge_request_event"
      when: never
    - if: $CI_PIPELINE_SOURCE == "schedule"
      when: never
    - if: $CI_PROJECT_NAMESPACE == "GNOME"
      when: always
    - if: $CI_PROJECT_NAMESPACE != "GNOME"
      when: manual
      allow_failure: true

.build-gobject-introspection:
  before_script:
    # If the CI image doesn’t provide a new enough gobject-introspection
    # package, build it ourselves.
    # See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3746#note_2161354
    - >
      if ! pkg-config --atleast-version "${GOBJECT_INTROSPECTION_TAG}" gobject-introspection-1.0; then
        mkdir -p gobject-introspection
        git clone --branch $GOBJECT_INTROSPECTION_TAG https://gitlab.gnome.org/GNOME/gobject-introspection.git gobject-introspection
        meson gobject-introspection gobject-introspection/build --prefix=/usr
        sudo meson install -C gobject-introspection/build
      fi
  artifacts:
    expire_in: 3 days
    paths:
      - gobject-introspection

.build-linux:
  before_script:
    - bash .gitlab-ci/show-execution-environment.sh
    - cp -r $HOME/subprojects/* subprojects/

# FIXME: Work around https://gitlab.com/gitlab-org/gitlab/-/issues/391756
.with-git:
  before_script:
   - rm -rf subprojects/gvdb
   - git config --global --add safe.directory "${PWD}"
   - git submodule update --init --depth 1
  variables:
    GIT_SUBMODULE_STRATEGY: "none"
    GIT_SUBMODULE_DEPTH: 1

style-check-advisory:
  extends:
    - .only-default
    - .with-git
  image: $DEBIAN_IMAGE
  stage: style-check
  allow_failure: true
  script:
    - failed=
    - .gitlab-ci/run-style-check-diff.sh || failed=1
    - .gitlab-ci/run-check-todos.sh || failed=1
    - test -z "$failed"

sh-and-py-check:
  extends:
    - .only-default
    - .with-git
  image: $DEBIAN_IMAGE
  stage: style-check
  allow_failure: false
  script:
    - failed=
    - tests/shellcheck.sh || failed=1
    - tests/black.sh || failed=1
    - tests/flake8.sh || failed=1
    - test -z "$failed"
  variables:
    LINT_WARNINGS_ARE_ERRORS: '1'
  only:
    changes:
      - "**/*.py"
      - "**/*.sh"

style-check-mandatory:
  extends:
    - .only-default
    - .with-git
  image: $DEBIAN_IMAGE
  stage: style-check
  allow_failure: false
  script:
    - tests/reuse.sh
  variables:
    LINT_WARNINGS_ARE_ERRORS: '1'

fedora-x86_64:
  extends:
    - .build-gobject-introspection
    - .build-linux
    - .only-default-and-merges
    - .with-git
  image: $FEDORA_IMAGE
  stage: build
  needs: []
  variables:
    CFLAGS: "--coverage -ftest-coverage -fprofile-arcs -fprofile-update=atomic"
    CXXFLAGS: "--coverage -ftest-coverage -fprofile-arcs -fprofile-update=atomic"
  before_script:
    - !reference [".build-linux", "before_script"]
    - !reference [".with-git", "before_script"]
    - !reference [".build-gobject-introspection", "before_script"]
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            --default-library=both
            --prefix=$HOME/glib-installed
            --localstatedir=/var
            --libdir=lib
            -Dsystemtap=enabled
            -Ddtrace=enabled
            -Dinstalled_tests=true
            -Ddocumentation=true
            -Dintrospection=enabled
            -Dman-pages=enabled
            _build
    - meson compile -C _build
    - mkdir -p _coverage
    - lcov --config-file .lcovrc --directory _build --capture --initial
      --output-file "_coverage/${CI_JOB_NAME}-baseline.lcov"
    - .gitlab-ci/run-tests.sh
    - lcov --config-file .lcovrc --directory _build --capture
      --output-file "_coverage/${CI_JOB_NAME}.lcov"
    # Copy the built documentation to an artifact directory. The build for docs.gtk.org
    # can then pull it from there — see https://gitlab.gnome.org/GNOME/gtk/-/blob/docs-gtk-org/README.md
    - mkdir -p _reference/
    - mv _build/docs/reference/glib/glib-2.0/ _reference/glib/
    - mv _build/docs/reference/glib/glib-unix-2.0/ _reference/glib-unix/
    - mv _build/docs/reference/gmodule/gmodule-2.0/ _reference/gmodule/
    - mv _build/docs/reference/gobject/gobject-2.0/ _reference/gobject/
    - mv _build/docs/reference/gio/gio-2.0/ _reference/gio/
    - mv _build/docs/reference/gio/gio-unix-2.0/ _reference/gio-unix/
    - mv _build/docs/reference/girepository/girepository-2.0/ _reference/girepository/
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"
      - "_coverage"
      - "_reference"

.build-debian:
  extends:
    - .build-linux
    - .with-git
  stage: build
  needs: []
  before_script:
    - !reference [".build-linux", "before_script"]
    - !reference [".with-git", "before_script"]
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            --default-library=both
            --prefix=$HOME/glib-installed
            --localstatedir=/var
            --libdir=lib
            -Dsystemtap=enabled
            -Ddtrace=enabled
            _build
    - meson compile -C _build
    - .gitlab-ci/run-tests.sh
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"

debian-stable-x86_64:
  extends:
    - .build-debian
    # We don't need to run this job too often, because the combination of
    # fedora-x86_64 and debian-stable-i386 should cover more or less
    # everything that this job does
    - .only-schedules-or-manual
  image: $DEBIAN_IMAGE

debian-stable-i386:
  extends:
    - .build-debian
    - .only-default
  image: $DEBIAN_I386_IMAGE

hurd-i386:
  extends:
    - .only-schedules-or-manual
    - .with-git
  stage: build
  tags:
    - hurd
  needs: []
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            --default-library=both
            --prefix=$HOME/glib-installed
            --localstatedir=/var
            --libdir=lib
            _build
    - meson compile -C _build
    - .gitlab-ci/run-tests.sh
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"

muslc-alpine-x86_64:
  extends:
    - .build-linux
    - .only-schedules-or-manual
    - .with-git
  image: $ALPINE_IMAGE
  stage: build
  needs: []
  before_script:
    - !reference [".build-linux", "before_script"]
    - !reference [".with-git", "before_script"]
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            --default-library=both
            --prefix=$HOME/glib-installed
            --localstatedir=/var
            --libdir=lib
            _build
    - meson compile -C _build
    - .gitlab-ci/run-tests.sh
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"

installed-tests:
  extends:
    - .build-linux
    - .only-schedules-or-manual
  image: $FEDORA_IMAGE
  stage: build
  needs: []
  script:
    # dtrace is disabled because it breaks the static-link.py test
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            --prefix=/usr --libdir=/usr/lib64
            -Dinstalled_tests=true
            -Ddefault_library=both
            -Ddtrace=disabled
            _build
    - meson compile -C _build
    - sudo meson install -C _build
    # Remove old headers, possibly present in current installation
    - sudo rm -f /usr/include/glib-2.0/glib/gurifuncs.h
    - sudo chown -R `id -un`:`id -gn` _build/
    # Work-around https://gitlab.gnome.org/GNOME/gnome-desktop-testing/merge_requests/2
    - mkdir -p _build/installed-tests-report/logs/
    - GLIB_TEST_COMPILATION=1 gnome-desktop-testing-runner
            --report-directory=_build/installed-tests-report/failed/
            --log-directory=_build/installed-tests-report/logs/
            --parallel=0
            glib
  artifacts:
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"
      - "_build/installed-tests-report/"

G_DISABLE_ASSERT:
  extends:
    - .build-linux
    - .only-schedules-or-manual
    - .with-git
    - .build-gobject-introspection
  image: $FEDORA_IMAGE
  stage: build
  needs: []
  variables:
    MESON_TEST_TIMEOUT_MULTIPLIER: 15
  before_script:
    - !reference [".build-linux", "before_script"]
    - !reference [".with-git", "before_script"]
    - !reference [".build-gobject-introspection", "before_script"]
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            -Dsystemtap=enabled
            -Ddtrace=enabled
            -Dinstalled_tests=true
            -Dglib_assert=false
            -Dintrospection=enabled
            _build
    - meson compile -C _build
    # Also take the opportunity to run the thorough tests (which are slow)
    - bash -x ./.gitlab-ci/run-tests.sh --setup thorough
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"

valgrind:
  extends:
    - .build-linux
    - .only-schedules-or-manual
    - .with-git
    - .build-gobject-introspection
  image: $FEDORA_IMAGE
  stage: analysis
  needs: []
  variables:
    MESON_TEST_TIMEOUT_MULTIPLIER: 15
  before_script:
    - !reference [".build-linux", "before_script"]
    - !reference [".with-git", "before_script"]
    - !reference [".build-gobject-introspection", "before_script"]
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            -Dsystemtap=enabled
            -Ddtrace=enabled
            -Dinstalled_tests=true
            -Dintrospection=enabled
            _build
    - meson compile -C _build
    # Valgrind doesn’t work when the soft FD limit is set too high
    # See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2710
    - ulimit -Sn 1024
    - bash -x ./.gitlab-ci/run-tests.sh
                 --setup valgrind
                 --no-suite slow
  artifacts:
    reports:
      junit: "_build/meson-logs/testlog-valgrind.junit.xml"
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"

.cross-build-linux:
  extends: .build-linux
  stage: build
  needs: []
  artifacts:
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/meson-logs"

cross-android_arm64:
  extends:
    - .cross-build-linux
    - .only-default
  image: $FEDORA_IMAGE
  script:
    # FIXME: add --werror
    - meson setup ${MESON_COMMON_OPTIONS} --cross-file=.gitlab-ci/cross_file_android_arm64_31.txt _build
    - meson compile -C _build

cross-mingw64:
  extends:
    - .cross-build-linux
    - .only-default
  image: $MINGW_IMAGE
  variables:
    PYTHONUTF8: "1"
  script:
    # FIXME: Add --werror
    - meson setup ${MESON_COMMON_OPTIONS} --cross-file=/opt/cross_file_mingw64.txt _build
    - meson compile -C _build
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - _build/meson-logs
      - _build/glib/libglib-2.0-0.dll
      - _build/gio/libgio-2.0-0.dll
      - _build/gmodule/libgmodule-2.0-0.dll
      - _build/gthread/libgthread-2.0-0.dll
      - _build/gobject/libgobject-2.0-0.dll

# A note about msys2: it’s a rolling release distribution, running Windows under
# Docker isn’t really supported, and the win32-ps CI runner is shared. All that
# adds up to mean that we have to run CI against the latest msys2 packages, and
# that this occasionally causes deterministic build failures in GLib due to
# changes in msys2.
# In order to avoid that pre-empting other GLib development, the policy in such
# cases is to:
#  1. Immediately and without hesitation make the msys2-* CI jobs non-fatal
#     (add `allow_failure: true` below).
#  2. File an issue about fixing the GLib msys2 build and re-enabling failure
#     on the CI job
#  3. Set the milestone for that issue to be the next GLib release, so it’s done
#     in a timely manner; and tag it as ~win32 so the GLib Windows maintainers
#     are notified and can work on it.
#  4. Rebase any pending broken MRs on top of the commit which makes the CI job
#     non-fatal, so that development on `main` is unblocked.
#
# This policy doesn’t apply to intermittent flaky test failures, only to
# consistent build failures caused by changed dependencies or build environment.
msys2-mingw32:
  extends: .only-default-and-merges
  stage: build
  tags:
    - win32-ps
  needs: []
  variables:
    MSYSTEM: "MINGW32"
    CHERE_INVOKING: "yes"
    CFLAGS: -coverage -ftest-coverage -fprofile-arcs
    PYTHONUTF8: "1"
    G_DEBUGGER: 'gdb.exe -batch -ex "set logging enabled on" -ex "attach %p" -ex "signal-event %e" -ex "c" -ex "thread apply all bt full" -ex "k"'
  script:
    - C:\msys64\usr\bin\pacman --noconfirm -Syyuu --ask 20
    - C:\msys64\usr\bin\bash .gitlab-ci/show-execution-environment.sh
    - C:\msys64\usr\bin\bash -lc "bash -x ./.gitlab-ci/test-msys2.sh"
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - _build/meson-logs
      - _build/gdb.txt
      - _coverage/
      - _reference/

# See the note about msys2 CI job failure policy above.
msys2-clang64:
  extends: .only-schedules-or-manual
  stage: build
  tags:
    - win32-ps
  needs: []
  variables:
    MSYSTEM: "CLANG64"
    CHERE_INVOKING: "yes"
    PYTHONUTF8: "1"
  script:
    - C:\msys64\usr\bin\pacman --noconfirm -Syyuu --ask 20
    - C:\msys64\usr\bin\bash .gitlab-ci/show-execution-environment.sh
    - C:\msys64\usr\bin\bash -lc "bash -x ./.gitlab-ci/test-msys2.sh"
  artifacts:
    reports:
      junit: "_build/meson-logs/testlog.junit.xml"
    name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - _build/meson-logs

vs2019-x64:
  extends: .only-default
  stage: build
  tags:
    - win32-ps
  needs: []
  variables:
    GIT_SUBMODULE_STRATEGY: recursive
    GIT_SUBMODULE_DEPTH: 1
    PYTHONUTF8: "1"
  script:
    # FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
    # aren’t currently set up for that.
    # FIXME: Use --meson-fatal-warnings once we've enabled c_std=gnu99,c99
    # for the runner's Meson version.
    - .gitlab-ci/test-msvc.bat --buildtype debug
                               --wrap-mode=default
                               --python.platlibdir=C:\Python37\site-packages
                               --python.purelibdir=C:\Python37\site-packages
                               --plat=x64
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - _build/meson-logs
      - _build/glib/libglib-2.0-0.dll
      - _build/gio/libgio-2.0-0.dll
      - _build/gmodule/libgmodule-2.0-0.dll
      - _build/gthread/libgthread-2.0-0.dll
      - _build/gobject/libgobject-2.0-0.dll

vs2019-x64-static:
  extends: .only-default
  stage: build
  tags:
    - win32-ps
  needs: []
  variables:
    GIT_SUBMODULE_STRATEGY: recursive
    GIT_SUBMODULE_DEPTH: 1
    PYTHONUTF8: "1"
  script:
    # FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
    # aren’t currently set up for that.
    # FIXME: Use --meson-fatal-warnings once we've enabled c_std=gnu99,c99
    # for the runner's Meson version.
    - .gitlab-ci/test-msvc.bat --buildtype debug
                               --wrap-mode=default
                               --default-library=static
                               --python.platlibdir=C:\Python37\site-packages
                               --python.purelibdir=C:\Python37\site-packages
                               --plat=x64
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - _build/meson-logs

vs2019-x86:
  extends: .only-schedules-or-manual
  stage: build
  tags:
    - win32-ps
  needs: []
  variables:
    GIT_SUBMODULE_STRATEGY: recursive
    GIT_SUBMODULE_DEPTH: 1
    PYTHONUTF8: "1"
  script:
    # FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
    # aren’t currently set up for that.
    # FIXME: Use --meson-fatal-warnings once we've enabled c_std=gnu99,c99
    # for the runner's Meson version.
    - .gitlab-ci/test-msvc.bat --buildtype debug
                               --wrap-mode=default
                               --python.platlibdir=C:\Python37\site-packages
                               --python.purelibdir=C:\Python37\site-packages
                               --plat=x64_x86
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - _build/meson-logs
      - _build/glib/libglib-2.0-0.dll
      - _build/gio/libgio-2.0-0.dll
      - _build/gmodule/libgmodule-2.0-0.dll
      - _build/gthread/libgthread-2.0-0.dll
      - _build/gobject/libgobject-2.0-0.dll

vs2019-arm64:
  extends: .only-schedules-or-manual
  stage: build
  tags:
    - win32-ps
  needs: []
  variables:
    GIT_SUBMODULE_STRATEGY: recursive
    GIT_SUBMODULE_DEPTH: 1
    PYTHONUTF8: "1"
  script:
    # FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
    # aren’t currently set up for that.
    # FIXME: Use --meson-fatal-warnings once we've enabled c_std=gnu99,c99
    # for the runner's Meson version.
    - .gitlab-ci/test-msvc.bat --buildtype debug
                               --wrap-mode=default
                               --python.platlibdir=C:\Python37\site-packages
                               --python.purelibdir=C:\Python37\site-packages
                               --plat=x64_arm64
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - _build/meson-logs
      - _build/glib/libglib-2.0-0.dll
      - _build/gio/libgio-2.0-0.dll
      - _build/gmodule/libgmodule-2.0-0.dll
      - _build/gthread/libgthread-2.0-0.dll
      - _build/gobject/libgobject-2.0-0.dll

freebsd-13-x86_64:
  extends: .only-schedules-or-manual
  stage: build
  tags:
    - freebsd-13
  needs: []
  variables:
    CPPFLAGS: -I/usr/local/include
    LDFLAGS: -L/usr/local/lib -Wl,--disable-new-dtags
    LANG: C.UTF-8
  before_script:
    - bash .gitlab-ci/show-execution-environment.sh
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --localstatedir=/var
            -Db_lundef=false
            -Dxattr=false
            -Dsystemtap=disabled
            -Ddtrace=disabled
            _build
    - meson compile -C _build
    - bash -x ./.gitlab-ci/run-tests.sh
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"

macos-arm64:
  only:
    - branches@GNOME/glib
    # runner's maintainer
    - branches@dehesselle/glib
  except:
    - tags
  stage: build
  tags:
    - macosarm
  needs: []
  cache: []
  variables:
    GIT_SUBMODULE_STRATEGY: normal
    # -Wno-overlength-strings
    # libpcre2 gets built as a subproject, but the default Clang options on
    # macOS limit string lengths to 4095B — pcre2_error.c has a string of length
    # 4380B
    CFLAGS: -Wno-overlength-strings
    # redirect to the runner's volatile temporary directory
    TMPDIR: /Users/Shared/work/tmp
    # keep the user profile clean
    PIP_CACHE_DIR: /Users/Shared/work/cache
    PIPENV_CACHE_DIR: $PIP_CACHE_DIR
    PYTHONPYCACHEPREFIX: $PIP_CACHE_DIR
    # target macOS 11 Big Sur
    SDKROOT: /opt/sdks/MacOSX11.3.sdk
    # use the runner's ccache directory
    CCACHE_DIR: /Users/Shared/work/ccache
  before_script:
    - bash .gitlab-ci/show-execution-environment.sh
    - python3 -m venv .venv
    - curl -L https://github.com/ccache/ccache/releases/download/v4.9.1/ccache-4.9.1-darwin.tar.gz | tar -C .venv/bin -xz --strip-components=1 ccache-4.9.1-darwin/ccache
    - source .venv/bin/activate
    - pip3 install meson==1.4.2 ninja==1.11.1.1 packaging==23.2
  script:
    # FIXME: These should use --wrap-mode=nodownload but the macOS CI machine
    # isn't currently set up for that. See:
    #  - https://gitlab.gnome.org/GNOME/glib/merge_requests/388
    #  - https://gitlab.gnome.org/Infrastructure/Infrastructure/issues/225
    - meson setup ${MESON_COMMON_OPTIONS}
            --wrap-mode=default
            --werror
            _build
    - meson compile -C _build
    - .gitlab-ci/run-tests.sh
  artifacts:
    reports:
      junit:
        - _build/meson-logs/testlog.junit.xml
        - _build/meson-logs/testlog-*.junit.xml
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_build/config.h"
      - "_build/glib/glibconfig.h"
      - "_build/meson-logs"

coverage:
  extends: .only-default
  image: $FEDORA_IMAGE
  stage: coverage
  needs: ['fedora-x86_64', 'msys2-mingw32']
  artifacts:
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    expire_in: 1 week
    expose_as: 'Coverage Report'
    paths:
      - _coverage/coverage/index.html
      - _coverage
    reports:
      coverage_report:
        coverage_format: cobertura
        path: _coverage/*-cobertura/cobertura-*.xml
  before_script:
    - bash .gitlab-ci/show-execution-environment.sh
  script:
    - bash -x ./.gitlab-ci/coverage-docker.sh
  coverage: '/^\s+lines\.+:\s+([\d.]+\%)\s+/'

scan-build:
  extends:
    - .build-linux
    - .only-schedules-or-manual
    - .build-gobject-introspection
  image: $FEDORA_IMAGE
  stage: analysis
  needs: []
  variables:
    # FIXME: Eventually we want static analysis on the tests and copylibs, for
    # code quality, but for the moment it’s just busywork.
    # FIXME: Disable the dead code checkers for now because they create a lot of
    # noise and don’t indicate high severity problems.
    SCAN_BUILD_FLAGS: >-
      --exclude gio/tests/
      --exclude girepository/tests/
      --exclude glib/tests/
      --exclude gmodule/tests/
      --exclude gobject/tests/
      --exclude gthread/tests/
      --exclude girepository/cmph/
      --exclude glib/libcharset/
      --exclude gio/xdgmime/
      --exclude meson-private/
      -disable-checker deadcode.DeadStores
      --status-bugs
  before_script:
    - !reference [".build-linux", "before_script"]
    - !reference [".build-gobject-introspection", "before_script"]
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            --default-library=both
            --prefix=$HOME/glib-installed
            --localstatedir=/var
            --libdir=lib
            -Dglib_debug=enabled
            -Dsystemtap=enabled
            -Ddtrace=enabled
            -Dinstalled_tests=true
            -Dintrospection=enabled
            _scan_build
    - SCANBUILD="$(pwd)/.gitlab-ci/scan-build.sh" ninja -C _scan_build scan-build
  artifacts:
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "_scan_build/meson-logs/scanbuild"

.coverity:
  extends:
    - .build-linux
    - .only-schedules-or-manual-in-default-branch
    - .build-gobject-introspection
  image: $COVERITY_IMAGE
  stage: analysis
  needs: []
  variables:
    # cov-build doesn’t like GLIB_DEPRECATED_ENUMERATOR
    CFLAGS: '-DGLIB_DISABLE_DEPRECATION_WARNINGS'
  before_script:
    - !reference [".build-linux", "before_script"]
    - !reference [".build-gobject-introspection", "before_script"]
  script:
    - meson setup ${MESON_COMMON_OPTIONS}
            --werror
            --default-library=both
            --prefix=$HOME/glib-installed
            --localstatedir=/var
            --libdir=lib
            -Dsystemtap=enabled
            -Ddtrace=enabled
            -Dinstalled_tests=true
            -Dintrospection=enabled
            _coverity_build
    - $HOME/cov-analysis-linux64-*/bin/cov-build --dir cov-int meson compile -C _coverity_build
    - tar cfz cov-int.tar.gz cov-int
    - curl https://scan.coverity.com/builds?project=$COVERITY_SCAN_PROJECT_NAME
           --form token=$COVERITY_SCAN_TOKEN --form email=$GITLAB_USER_EMAIL
           --form file=@cov-int.tar.gz --form version="$CI_COMMIT_SHA"
           --form description="$CI_COMMIT_SHA / $CI_COMMIT_TITLE / $CI_COMMIT_REF_NAME:$CI_PIPELINE_ID"
  artifacts:
    name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
    when: always
    expire_in: 1 week
    paths:
      - "cov-int/build-log.txt"

pages:
  extends: .only-schedules
  stage: deploy
  needs: ['coverage', 'style-check-advisory']
  script:
    - mv _coverage/ public/
  artifacts:
    paths:
      - public

dist-job:
  image: $FEDORA_IMAGE
  stage: build
  only:
    - tags
  script:
    # Ignore extra git security checks as we don't care in CI.
    - git config --global --add safe.directory "${PWD}"
    - git submodule update --init
    - for m in $(git submodule foreach -q 'echo $path'); do git config --global --add safe.directory "${PWD}/${m}"; done
    - meson subprojects download
    - meson setup ${MESON_COMMON_OPTIONS} --buildtype release -Ddocumentation=true -Dman-pages=enabled _build
    - meson dist -C _build
    # Compile again to build the docs
    - meson compile -C _build
    - tar -c -J -f "glib-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/glib glib-2.0
    - tar -c -J -f "gmodule-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gmodule gmodule-2.0
    - tar -c -J -f "gobject-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gobject gobject-2.0
    - tar -c -J -f "gio-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gio gio-2.0
    - tar -c -J -f "girepository-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/girepository girepository-2.0
  artifacts:
    paths:
      - "${CI_PROJECT_DIR}/_build/glib-docs-$CI_COMMIT_TAG.tar.xz"
      - "${CI_PROJECT_DIR}/_build/gmodule-docs-$CI_COMMIT_TAG.tar.xz"
      - "${CI_PROJECT_DIR}/_build/gobject-docs-$CI_COMMIT_TAG.tar.xz"
      - "${CI_PROJECT_DIR}/_build/gio-docs-$CI_COMMIT_TAG.tar.xz"
      - "${CI_PROJECT_DIR}/_build/girepository-docs-$CI_COMMIT_TAG.tar.xz"
      - "${CI_PROJECT_DIR}/_build/meson-dist/glib-*.tar.xz"

issue-bot:
  stage: report
  image: registry.gitlab.com/gitlab-org/distribution/issue-bot:latest
  script: /issue-bot
  rules:
    - if: $CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH && $CI_PIPELINE_SOURCE == "schedule"
      when: on_failure