Change the next-hop interface then importing routes from vrf to default

[nitinraj92]

In my setup, lan0.100 is slave to vrf-green and when lan0.100's connect route is advertized to default vrf, the next-hop is show as vrf-green instead if lan0.100.

root@CE2A:/home/lavelle# ip route show 192.168.20.0/24
192.168.20.0/24 nhid 287 dev vrf-green proto bgp metric 20

root@CE2A:/home/lavelle# ip route show vrf vrf-green 192.168.20.0/24
192.168.20.0/24 dev lan0.100 proto kernel scope link src 192.168.20.1

As we can see, in vrf-green the dev is lan0.100 but in default vrf, it's vrf-green.

CE2A# show interface lan0.100
Interface lan0.100 is up, line protocol is up
  Link ups:       0    last: (never)
  Link downs:     0    last: (never)
  vrf: vrf-green
  index 6 metric 0 mtu 1500 speed 0 txqlen 1000
  flags: <UP,LOWER_UP,BROADCAST,RUNNING,MULTICAST>
  Type: Ethernet
  HWaddr: ae:01:d0:25:7b:ba
  inet 192.168.20.1/24
  Interface Type Vlan
  Interface Slave Type Vrf
  VLAN Id 100
  protodown: off
  Parent interface: sw0
CE2A# show ip bgp 192.168.20.0/24
BGP routing table entry for 192.168.20.0/24, version 35
Paths: (1 available, best #1, table default)
  Imported from 192.168.20.1:4:192.168.20.0/24
  Local
    0.0.0.0 from 0.0.0.0 (6.6.6.6) vrf vrf-green(140) announce-nh-self
      Origin incomplete, metric 0, weight 32768, valid, sourced, local, best (First path received)
      Community: 100:100
      Originator: 6.6.6.6
      AddPath ID: RX 0, TX-All 5 TX-Best-Per-AS 0 TX-Best-Selected 0
      Advertised to: 172.16.5.1
      Last update: Sat Sep 14 21:27:54 2024
CE2A# show ip route 192.168.20.0/24
Routing entry for 192.168.20.0/24
  Known via "bgp", distance 20, metric 0, best
  Last update 00:02:18 ago
  * directly connected, vrf-green(vrf vrf-green), weight 1

Attaching the bgp configuration for reference.

router bgp 64402
 bgp router-id 6.6.6.6
 no bgp ebgp-requires-policy
 neighbor 172.16.5.1 remote-as 64501
 neighbor 172.16.5.1 update-source eth1
 !
 address-family ipv4 unicast
  network 172.16.5.0/30
  redistribute connected
  redistribute static
  neighbor 172.16.5.1 addpath-tx-all-paths
  neighbor 172.16.5.1 addpath-rx-paths-limit 4
  maximum-paths 4
  import vrf vrf-green
  import vrf vrf-black
 exit-address-family
exit
router bgp 64402 vrf vrf-green
 neighbor 172.16.5.1 remote-as 64501
 !
 address-family ipv4 unicast
  redistribute connected route-map RP_VRF_GREEN_OUT
  redistribute ospf metric 100 route-map RP_VRF_GREEN_OUT
  import vrf route-map RP_VRF_GREEN_IN
  import vrf default
 exit-address-family
exit

Is there any vrf/bgp configuration to retain the next-hop that is present in vrf-green i.e lan0.100 instead of vrf-green??