Tool drawer bottoms collapsing.

[magman2112]

The tool drawers underneath the large Vacuum Former are failing due to the weight of the materials stored in these drawers.

This can be fixed by replacing the drawer bottoms with thicker plywood, if this plywood is rebated to fit in the original groove.

The larger drawer sizes are 90x47cm, with the actual piece being slightly smaller than this (to be measured when we remove the original drawer bottoms). There is a 10mm space at the bottom of the drawer, so it can accommodate a 6mm or 8mm thick replacement material thickness.

I will research some replacement materials then order enough for one drawer to test the concept.