Rewriting the SD image will completely replace the contents of your SD card. In particular, this will replace Stella's assets with the most current version. This will give you a clean start and is the recommended method if you are coming from the original firmware or the original (Stella 3) community image.
-
Download
sdcard.zip
from the releases page. -
Extract the contained
sdcard.img
file from the zip archive. -
Turn the device off and remove the SD card.
-
Write the
sdcard.img
file directly to the SD card. Note that this is not the same as copying the file; you need to write the file directly to the card. On windows, this can be done using an imaging tool such as USB Image Tool, Win32 Disk Imager or Etcher. The latter is also also available for MacOS and Linux; as alternative, you can write the image on a terminal withdd
on those systems if you know what you are doing.WARNING: This step is dangerous. Selecting a wrong drive for writing the SD image will wipe the drive, destroying all data on it and potentially rendering your computer unusable. Be cautious and make sure you know what you are doing. Ask someone for help if you aren't.
-
Reinsert the SD card into the device and turn it back on. Say hello to Stella 6.
This will preserve the contents of your SD card and will only swap out the actual Stella binary and the linux system. This is recommended if you are updating from any Stella 6 image.
- Download
uImage
from the releases page. - Turn the device off and remove the SD card.
- (optional) Make a backup copy from the old
uImage
file on your SD card - Replace the
uImage
with the downloaded file - Reinsert the SD card into the device and turn it back on. Say hello to Stella 6.