unlshd-038

New changes

• If you have copied apps into apps folder - remove apps folder on your microSD before installing this release to avoid issues!
• Dev Builds: Add extra pack dev branch to avoid "bug" reports with API mismatch
• App Loader: Add option to ignore api mismatch (warning! some apps WILL not work, please update them to avoid any issues) -> (by @Willy-JL | PR #395)
• SubGHz: Add manually -> GSN protocol support
• SubGHz: Add 318 and 418 MHz back to hopping list
• SubGHz: Fix hopper stuck at 433.42 due to wide range signals -
  When we using 433.92 remote flipper in hopping mode will stuck at 433.42 and may loose signal because of that, need to avoid using close freqs in hopping, only freqs with bigger difference like 310 -> 315
• Plugins: Update TOTP (Authenticator) (by akopachov) -> BadBT Support
• OFW: Screen streaming improvements
• OFW: 1-Wire Overdrive Mode -> Breaking API change, api was changed from 19.x to 20.x
• OFW: Disable UART IRQs by default
• OFW: BadUSB: implement boot protocol
• OFW: Remove hmac_sha256 from public API -> Breaking API change, api was changed from 18.x to 19.x
  (this will make your manually copied plugins not work, update them in same way you installed them, or delete apps folder and then install firmware, if you using extra pack builds (with e in version) all apps in _Extra will be updated automatically)

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-038(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-038.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-037

New changes

• Plugins: Fix minesweeper freeze bugs, do some refactoring
• Plugins: Update WAV Player, 16 bit support by @LTVA1
• Infrared: Update universal remote assets (by @amec0e | PR #394)
• OFW PR: Fixed writing gen1a magic tags with invalid BCC (PR 2511 by AloneLiberty)
• OFW: BadUSB: Script interpreter refactoring
• OFW: SubGhz: fix Incorrect comparison in subghz_setting_get_hopper_frequency
• OFW: Add one_wire lib to f18, separate ibutton
• OFW: Improved debugging experience for external apps
• OFW: SD Driver: reinit sd card on error
• OFW: OTP programmer: return exit code based on error type

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-037(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-037.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-036

New changes

• iButton: Add support for DS1420 (not fully tested)
• Desktop: Option to set Tertiary favourite app (Hold right arrow on desktop) - Desktop settings (pin code, favourite app, autolock time) will be resetted!!! Only one time after installing - due to changes in settings structure, after installing of this release desktop settings will not be reset with next release
• Desktop: Ability to disable favourite app (use last element in a main list None (disable))
• Desktop: Fix issue #387 (Ok button was showing invalid file error in dummy mode)
• OFW PR: SD Driver: reinit sd card on error (by DrZlo13 | OFW PR 2493)
• OFW PR: iButton -> Fix a typo: use right shift instead of greater than (by gsurkov | OFW PR 2506)
• OFW: Optimize trailing slash check

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty (patreon alternative): https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-036(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-036.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-035

New changes

• SubGHz: New protocols support: CAME Space, Stilmatic / Schellenberg
• SubGHz: Add Manually - new protocols -> Beninca, Sommer(FSK), IronLogic, DTM Neo, Gibidi, Elmes Electronic (Elmes Poland), CAME Space
• SubGHz: Security+ 2.0 -> Ability to send custom buttons codes (0x80, 0x81, 0xE2)
• SubGHz: Remember last external module setting and power setting, so if you turn off flipper it will remember last external module settings (only for subghz app)
• SubGHz: Fix issues when external module is not found but plugins tries to use it, now they will fallback to internal in that case
• SubGHz: Fixed external CC1101 module power issues, added more checks, fixed issues when launching subghz favourites
• SubGHz: Removed 330MHz from default freq hopper to make it faster, to change freq hopper settings and remove/add your freqs see -> Instruction
• SubGHz: Small UI text fixes
• GUI: Fix submenu elements text size, now we can fit more symbols
• Plugins: Added delay and retries to avoid power issues in plugins -> WiFi Scanner, ESP8266 Deauther
• Plugins: Update for WiFi Marauder companion -> sniff saves pcaps in YourFlippersMicroSD/apps_data/marauder/ -> Only with custom marauder build (It is necessary to uncomment "#define WRITE_PACKETS_SERIAL" in configs.h (in marauder fw) and compile the firmware for the wifi board.) Or download precompiled build -> Download esp32_marauder_ver_flipper_sd_serial.bin - (by tcpassos)
• Plugins: Removed cdefines from external plugins as it was not used in any way
• Plugins: Updated TOTP (Authenticator) (by akopachov) (fixed issue #379)
• Plugins: Update for SubGHz Bruteforcer, added - Holtek HT12X 12bit AM 433.920MHz/315MHz/868MHz/915MHz (TE: 433us)
• OFW: iButton: Add support for Dallas DS1971
• OFW: fbt: explicitly set dist suffix length, not depending on environment settings
• OFW: NFC -> Skip the read when the card is not present
• OFW: NFC -> Mark keys as not found when they couldn't auth successfully
• OFW: Storage -> Require the trailing slash for root paths
• OFW: gh: use shallow clones whenever possible
• OFW: Add new nfc apdu cli command
• OFW: Picopass standard KDF dictionary
• OFW: Nfc: fixes for latest PVS-studio 7.23
• OFW: Dolphin: new spring animation, weight adjust, drop winter animation.
• OFW: fbt, faploader: minimal app module implementation -> All plugins now should have apptype=FlipperAppType.EXTERNAL
• OFW: Fbt: fix broken resource deployment
• OFW: NFC: Fix 0 block write possibility in Mifare Classic emulation
• OFW: BadUSB: updated parser and added stringln, hold and release
• OFW: Upside down / left handed orientation support
• OFW: Embed assets in elf file
• OFW: Dumb mode menu freeze fix

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-035(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-035.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-034

New changes

• If you have copied apps into apps folder - remove apps folder on your microSD before installing this release to avoid issues!

• SubGHz: Default custom buttons layout for non standard remotes (for example your remote has broken buttons and transmit only 0xC, now you can use other buttons)

• SubGHz: Fix issues with external module 5v power (now all works automatically, enabling +5v manually not required) (Only for modules that work with 5v->3.3v converter!!!!!)

• SubGHz: Option to disable automatic 5v power for external modules - (5v is enabled by default, if you are using module without converter you can set this option to OFF)

• SubGHz: Fix and update subghz protocols to use new error system

• SubGHz: Fix default frequency being overwritten bug (Add manually fixes)

• SubGHz: Fix 464Mhz and (390MHz for external module only) was showing up in Frequency analyzer all the time due to noise

• iButton: Fix ibutton app - add manually - duplicate names

• Plugins: NFC Magic fix - reinit nfc at app start

• Plugins: Update Unitemp - Temperature sensors reader (DHT11/22, DS18B20, BMP280, HTU21x and more) (by quen0n)

• Plugins: Update SWD Probe (by g3gg0)

• Plugins: Massive plugins refactoring - not full refactoring, only small issues is fixed and moved all plugins to furi mutex instead of valuemutex

• Plugins: Many small issues was found and fixed due mutex upgrade

• Plugins: Extra pack updated and fixed (valuemutex to furi_mutex upgrade)

• Plugins: SubGHz playlist - rewind (skip or play previous file) (by alvarotorijano)

• Plugins: Properly rename unirf remix to subghz remote - And automatically migrate user files to new folder (unirf -> subghz_remote)

• Plugins: Fix unirf freeze (protocol deserialize status ok) (by @Willy-JL | PR #375)

• Plugins: Blackjack game: fix bug counting more than one ace (by @403-Fruit | PR #374)

• Plugins: Update POCSAG Pager app to new error system

• Plugins: Update iButton Fuzzer to new iButton system

• Infrared: Update universal remote assets (by @amec0e | PR #378)

• OFW: PicoPass: auth cleanup

• OFW: More UI fixes and improvements

• OFW: NFC: Support reading Mifare Classic key B from sector trailer, reading sector with B key where A key can't read block, Nfc Magic app not using NFC folder by default (in file select)

• OFW: Remove ValueMutex -> Breaking API change, api was changed from 17.x to 18.x

• OFW: Support reseting iCx cards

• OFW: Fixed picopass load save file overrun

• OFW: Fix SD card CID parsing

• OFW: Archive browser: update path on dir leave

• OFW: SubGhz: better and more verbose error handling in protocols, stricter CAME validation -> Breaking API change, api was changed from 16.x to 17.x

• OFW: iButton system and app refactoring (+new protocols) -> Breaking API change, api was changed from 15.x to 16.x
  (this will make your manually copied plugins not work, update them in same way you installed them, or delete apps folder and then install firmware, if you using extra pack builds (with e in version) all apps in _Extra will be updated automatically)

• OFW: New pin reset splashscreen

• OFW: Getter for application data path

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-034(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-034.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-033

New changes

• If you have copied apps into apps folder - remove apps folder on your microSD before installing this release to avoid issues!

• SubGHz: Fixed timings for static CAME 12 bit and other types (fixed issue #280)

• SubGHz: Fix #370 and fix other protocol counter issues

• SubGHz: Custom buttons for Nice Flor S / Somfy Telis (+Programming mode) - now you can use arrow buttons to send signal with different button code

• SubGHz: Somfy Telis -> Add manually (create new remote, now with programming button (Prog / 0x8) you can write it into receiver)

• SubGHz: BFT Mitto -> Add manually (create new remote, now with programming button (0xF) you can write it into receiver)

• SubGHz: Nice One -> Add manually (programming is possible using regular button)

• SubGHz: More precise settings for debug counter increase value

• Plugins -> MouseJacker: Features, Fixes and improvements (by @MatthisC | PR #366)

• Plugins -> HC-SR04: Improve accuracy by measuring microseconds (by @clashlab | PR #367)

• OFW PR: 2441 - Infrared: Fix hangups on repeated button press (by gsurkov)

• OFW PR: 2440 - Fix navigation on unsupported card types (by Astrrra)

• OFW: BadUSB UI fixes

• OFW: Plugins: move to designated categories -> We moved some plugins to new categories too

• OFW: Drivers: remove excessive check in bq25896 and make PVS happy

• OFW: FuriHal, Power, UnitTests: fix, rename battery charging voltage limit API -> Breaking API change, api was changed from 14.x to 15.x
  (this will make your manually copied plugins not work, update them in same way you installed them, or delete apps folder and then install firmware, if you using extra pack builds (with e in version) all apps in _Extra will be updated automatically)

• OFW: Fix incorrect type choise condition in image compressor

• OFW: Updater: handle storage errors when removing files, fix folder remove routine, prevent unused services from starting

• OFW: Unify power info, power debug, and device_info into one info command

• OFW: SD Cache: moved to diskio layer, invalidation in case of error

• OFW: Picopass: factory key support, minor code cleanup

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-033(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-033.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-032

New changes

• SubGHz: Keeloq: Beninca - protocol support
• SubGHz: Hold right in received signal list to delete selected signal
• SubGHz: Custom buttons for Keeloq and Alutech AT4N - now you can use arrow buttons to send signal with different button code
• SubGHz: Debug mode counter increase settings (+5, +10, default: +1)
• Infrared: Debug TX PIN output settings (ability to move tx signal out to GPIO) (implemented #364)
• Plugins: Updated -> [BH1750] Lightmeter (by oleksiikutuzov)
• OFW: BadUSB -> STRINGDELAY(STRING_DELAY) feature, worker signal handling refactoring -> (Fixed #365 (BadUSB won't detect connection and/or hangs))
• OFW: Grammar fixes

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-032(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-032.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-031

New changes

• Desktop: Autolock with PIN Code (by @Willy-JL | PR #338) - Desktop settings (pin code, favourite app, autolock time) will be resetted!!! Only one time after installing - due to changes in settings structure, after installing of this release desktop settings will not be reset with next release
• Desktop: Faster back button hold time for power off, was 2 seconds, now 1.3sec
• GUI: Fix keyboard capitalization bug (by @Willy-JL | PR #362) (fixes #361)
• Plugins: Added SWD Probe (by g3gg0) (moved from extra pack into main FW)
• Plugins: Show RSSI in Weather Station app and in POCSAG Pager app
• Plugins: Improve Tetris fall speed algorithm (by @p3ngu19z | PR #343)
• Plugins: Add missing buttons into HID app, remove old keyboard app, move Bluetooth remote to Misc
• Infrared: Assets update (by @amec0e | PR #340 / #357 / #358)
• Misc: Typo combing (by @Round-Pi | PR #352)
• OFW: Dolphin: drop holiday animation
• OFW: fbt: FBT_QUIET option; docs on environment
• OFW: Delete rwfiletest.bin on exit SDcard benchmark
• OFW: Re-init NFC when starting the worker
• OFW: Up toolchain version to 21
• OFW: Display Mifare Classic data in NFC app

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-031(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-031.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-030

New changes

• SubGHz: Nice ON2E (Nice One) support (by @assasinfil | PR #335)
• SubGHz: Remove 467.75 From freq analyzer since it has too much noise (Frequency is still can be used, just excluded from FA to avoid false detections)
• Archive and FileBrowser: Fixed more navigation issues (by @Willy-JL | PR #334)
• Plugins -> SubGHz Bruteforcer: Fix Linear Delta 3 repeats (now its more stable and we will be sure signal is received correctly)
• Plugins: Updated TOTP (Authenticator) (by akopachov)
• OFW: Fix Cyfral & Metakom emulation (My temp fix removed and proper fix from OFW applied)
• OFW: BadUSB: disable CDC mode, USB mode switch fix
• OFW: Updater visual fixes

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-030(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-030.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-029

New changes

• Archive and FileBrowser: Fixed #332 (large folders parse issue)
• Archive and FileBrowser: Fixed navigation issues and improved performance (by @Willy-JL | PR #333)
• SubGHz -> HAL: Fixed external CC1101 module issues (transmission now works correctly) (fixed issue #331)
• SubGHz: Use 17 (1W) pin for subghz debug mode

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-029(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-029.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater