You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I'm hoping that somebody can add support for DTM System (Keeloq based) protocol - I know DTM Neo is already implemented but this seems to be a different protocol - maybe very similar so easy to add?
The transmission frequency is 433,868 MHz with AM modulation
I was able to pair the partially decoded KeeLoq (by using the "Send" function in the decoded view) with the gate but it worked just once as the counter did not increment.
Description of the feature you're suggesting.
I'm hoping that somebody can add support for DTM System (Keeloq based) protocol - I know DTM Neo is already implemented but this seems to be a different protocol - maybe very similar so easy to add?
The transmission frequency is 433,868 MHz with AM modulation
I was able to pair the partially decoded KeeLoq (by using the "Send" function in the decoded view) with the gate but it worked just once as the counter did not increment.
Subfiles
Below you will find 4 files with 10 keypresses from my 4-button remote, recorded as RAW files
RAW_20231224-pola1.sub.txt
RAW_20231224-pola2.sub.txt
RAW_20231224-pola3.sub.txt
RAW_20231224-pola4.sub.txt
Photos of the PCB
Thanks a lot!
Anything else?
No response
The text was updated successfully, but these errors were encountered: