The following text must be included in any distribution of derivatives of this design. All links must also be included.
Based on the Open Stick 3D Printable Stand by TheTrain
Copyright © 2023 TheTrain
Changes from the original design:
- list any changes you make here
These are two 3D Printable Stands in small (and large), but well balanaced, designs for holding sticks like the Open_Core0, Flatbox and other small (and large) board designs.
Here are my printing specs Printer: Bambu Lab X1C Nozzle: 0.2mm steel Sheet: Textured PEI Filament: Bambu Lab Matte Black PLA Layer height: 0.1mm Outter walls: 6 Infill percentage: 15% Infill type: Honeycomb
If printing on a larger nozzle like the 0.4mm you can do 3 outter walls.
These should be included at little to no cost with existing orders.
You are free to set your own price as you see fit.
Donations are not necessary but always welcome! All received donations will be used to try out new designs or send things to people for testing, iterations and helping people get board setups that might not be in an economic position to get one themselves.
https://www.paypal.com/donate/?hosted_button_id=2JMTZVCGLDYC2
v1.0
- Initial open source design
- TheTrain for doing the stands