LR 4000E7E4 - hekate exception occurred

[innocentDE]

Mod Chip installation with Picofly RP2040. Hang detected in LP0/Minerva.

First time this happened. Freshly installed. Modded already a few.

[innocentDE]

• blue Screen when mod chip is removed
• boots into hekata (nyx is missing) when removing the SD Card
• emmc and sd card are fine (sd card is legit and properly formatted)
• tools and console info from hekate are working

[urherenow]

Did you search the closed issues for this error? It's almost always related to sd card/reader problems, file corruption, or you need to reflow your ram or apu. With an RPI, It could also be a wire that's a tad too long, or 1 of 2 spots that may need an extra 45ohm resistor (silicon lottery with that issue, I think).

But blue screen when removing the mod chip... that's clearly a mistake you made somewhere. Solder spatter or bridge maybe... you should take this conversation to discord or gbatemp.

[pmnlla]

Blue screen is usually a bad OS image or you need to reflow your board, iirc.

[innocentDE]

Blue screen is usually a bad OS image or you need to reflow your board, iirc.

Alright, will try to reflow. Thanks