diff --git a/User_Setup_Select.h b/User_Setup_Select.h index b8f25c31..79618041 100644 --- a/User_Setup_Select.h +++ b/User_Setup_Select.h @@ -76,6 +76,8 @@ //#include // Setup file for ESP32 and SSD1963 TFT display +//#include // Setup file for LilyGo LilyPi with ILI9481 display + //#include // Setup file for ESP8266 and ST7789 135 x 240 TFT //#include // Setup file for ESP32 and Lilygo TTV ST7789 SPI bus TFT 135x240 diff --git a/User_Setups/Setup51_LilyPi_ILI9481.h b/User_Setups/Setup51_LilyPi_ILI9481.h new file mode 100644 index 00000000..447aee9b --- /dev/null +++ b/User_Setups/Setup51_LilyPi_ILI9481.h @@ -0,0 +1,25 @@ +#define ILI9481_DRIVER + +#define TFT_BL 12 // LED back-light control pin +#define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW) + +#define TFT_MISO 23 +#define TFT_MOSI 19 +#define TFT_SCLK 18 +#define TFT_CS 5 // Chip select control pin +#define TFT_DC 27 // Data Command control pin +#define TFT_RST -1 // Set TFT_RST to -1 if display RESET is connected to ESP32 board RST + +#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH +#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters +#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters +#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm +#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-. +#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. +//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT +#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts + +#define SMOOTH_FONT + +#define SPI_FREQUENCY 26666666 +#define SPI_READ_FREQUENCY 20000000 \ No newline at end of file