diff --git a/User_Setup_Select.h b/User_Setup_Select.h index 2d459110..b8f25c31 100644 --- a/User_Setup_Select.h +++ b/User_Setup_Select.h @@ -78,6 +78,8 @@ //#include // Setup file for ESP8266 and ST7789 135 x 240 TFT +//#include // Setup file for ESP32 and Lilygo TTV ST7789 SPI bus TFT 135x240 + //#include // Setup file for ESP32 and GC9A01 240 x 240 TFT //#include diff --git a/User_Setups/Setup136_LilyGo_TTV.h b/User_Setups/Setup136_LilyGo_TTV.h new file mode 100644 index 00000000..0f7c0688 --- /dev/null +++ b/User_Setups/Setup136_LilyGo_TTV.h @@ -0,0 +1,34 @@ +// ST7789 135 x 240 display with no chip select line + +#define ST7789_DRIVER // Configure all registers + +#define TFT_WIDTH 135 +#define TFT_HEIGHT 240 + +#define CGRAM_OFFSET // Library will add offsets required + +// Generic ESP32 setup +//#define TFT_MISO 19 +#define TFT_MOSI 23 +#define TFT_SCLK 18 +#define TFT_CS 5 +#define TFT_DC 19 +#define TFT_RST 4 + + +#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH +#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters +#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters +#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm +#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. +#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. +//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT +#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts + +#define SMOOTH_FONT + + +// #define SPI_FREQUENCY 27000000 +#define SPI_FREQUENCY 40000000 + +// #define SUPPORT_TRANSACTIONS \ No newline at end of file