What to do from Lovelace UI / Tasmota version

[coelhoricardo]

Hi,
My english is not very good and I don't what know I need to do from a NSPanel with Lovelace UI / Tasmota version.

I managed to apply nspanel_blank.tft then nspanel_eu.tft.

my current epshome yaml :

esphome:
  name: nspanel
  friendly_name: tasmato-nspanel-8144

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "KEYREPLACED"

ota:
  - platform: esphome
    password: "PASSWORD REPLACED"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Tasmato-Nspanel-8144"
    password: "Ozty1T3j1Emb"

  manual_ip:
    # Set this to the IP of the ESP
    static_ip: 192.168.1.52
    # Set this to the IP address of the router. Often ends with .1
    gateway: 192.168.1.1
    # The subnet of the network. 255.255.255.0 works for most home networks.
    subnet: 255.255.255.0

captive_portal:
    

but compilation finishes with

INFO Successfully compiled program.
INFO Connecting to 192.168.1.52
ERROR Connecting to 192.168.1.52:3232 failed: [Errno 111] Connection refused

Thanks for the help

[edwardtfn]

From where you got this yaml? Have your panel ever worked with this yaml.
Looks like your yaml is defining a specific ip address for your panel but your panel isn't responding with that ip.
You could look at your router for which ip your panel is using right now and use that instead.
An if you want to use our solution, please use the yaml from this manuals: https://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/docs/install.md

Não se preocupe com seu inglês. Está ótimo. 😉

[coelhoricardo]

Since I didn't understand the steps for Tasmota version, I tried "add new device" to install ESP32.
192.168.1.52 is the device IP. I see the Tasmota http UI interface from it.

Maybe that's the biggest point I don't get.
Since Tasmota is installed, do I need to flash it again via USB-to-Serial TTL Interface ?
Can't I "just" compile the thing and upload it to tasmota to migrate to ESP ?

(O meu português é provavelmente pior do que o meu inglês. Prefiro o francês 😅.)

[coelhoricardo]

It seems I can follow this guide https://esphome.io/guides/migrate_sonoff_tasmota.html with my yaml (I'll remove IP params)

[coelhoricardo]

I have "Upload Failed / Invalid file signature" error message when trying update firmware... I tried with Tasmota 14 & 11

[coelhoricardo]

Ok, using "legacy" format is better. The device is online for ESPhome.
there's no http server on device ???

[edwardtfn]

there's no http server on device ???

Not by default, but you can add this to your yaml in order to activate it:

web_server: