install

Falcon Powershell Installation Scripts

Powershell scripts to install/uninstall Falcon Sensor through the Falcon APIs on a Windows endpoint.

Falcon API Permissions

API clients are granted one or more API scopes. Scopes allow access to specific CrowdStrike APIs and describe the actions that an API client can perform.

Ensure the following API scopes are enabled:

• Install:
  • Sensor Download [read]
  • Sensor update policies [read]
• Uninstall:
  • Host [write]
  • Sensor update policies [write]

Auto-Discovery of Falcon Cloud Region

Important

Auto-discovery is only available for [us-1, us-2, eu-1] regions.

The scripts support auto-discovery of the Falcon cloud region. If the FalconCloud parameter is not set, the script will attempt to auto-discover the cloud region. If you want to set the cloud region manually, or if your region does not support auto-discovery, you can set the FalconCloud parameter.

Configuration

Setting up Authentication

Using Client ID and Client Secret

Provide the required parameters:

.\falcon_windows_install.ps1 -FalconClientId <string> -FalconClientSecret <string>

Using an Access Token

You can also specify a Falcon access token if doing a batch install across multiple machines to prevent the need to call the token endpoint multiple times. If using an access token to authenticate, you MUST also provide FALCON_CLOUD:

.\falcon_windows_install.ps1 -FalconCloud us-2 -FalconAccessToken <string>

Note

If you need to retrieve an access token, run the script with the GET_ACCESS_TOKEN parameter set. The Falcon sensor will NOT be installed while this parameter is provided.

.\falcon_windows_install.ps1 -FalconClientId <string> -FalconClientSecret <string> -GetAccessToken

The script will output the access token to the console.

Install

Uses the CrowdStrike Falcon APIs to check the sensor version assigned to a Windows Sensor Update policy, downloads that version, then installs it on the local machine. By default, once complete, the script deletes itself and the downloaded installer package. The individual steps and any related error messages are logged to 'Windows\Temp\InstallFalcon.log' unless otherwise specified.

The script must be run as an administrator on the local machine in order for the Falcon Sensor installation to complete.

Script options can be passed as parameters or defined in the param() block. Default values are listed in the parameter descriptions:

<#
.PARAMETER FalconCloud
CrowdStrike Falcon OAuth2 API Hostname [default: autodiscover]
.PARAMETER FalconClientId
CrowdStrike Falcon OAuth2 API Client Id [Required if FalconAccessToken is not provided]
.PARAMETER FalconClientSecret
CrowdStrike Falcon OAuth2 API Client Secret [Required if FalconAccessToken is not provided]
.PARAMETER FalconCid
Manually specify CrowdStrike Customer ID (CID) [default: $null]
.PARAMETER FalconAccessToken
Manually set the access token for the Falcon API. Used to bypass the OAuth2 authentication process to cut down on rate limiting. [default: $null]
.PARAMETER GetAccessToken
Returns an access token from the API credentials provided. Used to manually set the FalconAccessToken parameter.
.PARAMETER MemberCid
Member CID, used only in multi-CID ("Falcon Flight Control") configurations and with a parent management CID [default: $null]
.PARAMETER SensorUpdatePolicyName
Sensor Update Policy name to check for assigned sensor version [default: 'platform_default']
.PARAMETER InstallParams
Additional Sensor installation parameters. Script parameters should be used instead when supported. [default: '/install /quiet /noreboot' ]
.PARAMETER LogPath
Script log location [default: 'Windows\Temp\InstallFalcon.log']
.PARAMETER DeleteInstaller
Delete sensor installer package when complete [default: $true]
.PARAMETER DeleteScript
Delete script when complete [default: $false]
.PARAMETER ProvToken
Provisioning token to use for sensor installation [default: $null]
.PARAMETER ProvWaitTime
Time to wait, in seconds, for sensor to provision [default: 1200]
.PARAMETER Tags
A comma-separated list of tags to apply to the host after sensor installation [default: $null]
.PARAMETER ProxyHost
The proxy host for the sensor to use when communicating with CrowdStrike [default: $null]
.PARAMETER ProxyPort
The proxy port for the sensor to use when communicating with CrowdStrike [default: $null]
.PARAMETER ProxyDisable
By default, the Falcon sensor for Windows automatically attempts to use any available proxy connections when it connects to the CrowdStrike cloud.
This parameter forces the sensor to skip those attempts and ignore any proxy configuration, including Windows Proxy Auto Detection.
.PARAMETER Verbose
Enable verbose logging
#>

Examples:

To download the script:

Invoke-WebRequest -Uri https://raw.githubusercontent.com/crowdstrike/falcon-scripts/v1.6.0/powershell/install/falcon_windows_install.ps1 -OutFile falcon_windows_install.ps1

Basic example that will install the sensor with the provided provisioning token

.\falcon_windows_install.ps1 -FalconClientId <string> -FalconClientSecret <string> -ProvToken <string>

Uninstall

Uninstalls the CrowdStrike Falcon Sensor for Windows. By default, once complete, the script deletes itself and the downloaded uninstaller package (if necessary). The individual steps and any related error messages are logged to 'Windows\Temp\csfalcon_uninstall.log' unless otherwise specified.

The script must be run as an administrator on the local machine in order for the Falcon Sensor installation to complete.

Script options can be passed as parameters or defined in the param() block. Default values are listed in the parameter descriptions:

<#
.PARAMETER MaintenanceToken
Sensor uninstall maintenance token. If left undefined, the script will attempt to retrieve the token from the API assuming the FalconClientId|FalconClientSecret are defined.
.PARAMETER UninstallParams
Sensor uninstall parameters ['/uninstall /quiet' if left undefined]
.PARAMETER UninstallTool
Sensor uninstall tool, local installation cache or CS standalone uninstaller ['installcache' if left undefined]
.PARAMETER LogPath
Script log location ['Windows\Temp\csfalcon_uninstall.log' if left undefined]
.PARAMETER DeleteUninstaller
Delete sensor uninstaller package when complete [default: $true]
.PARAMETER DeleteScript
Delete script when complete [default: $false]
.PARAMETER RemoveHost
Remove host from CrowdStrike Falcon [requires either FalconClientId|FalconClientSecret or FalconAccessToken]
.PARAMETER FalconCloud
CrowdStrike Falcon OAuth2 API Hostname [default: autodiscover]
.PARAMETER FalconClientId
CrowdStrike Falcon OAuth2 API Client Id
.PARAMETER FalconClientSecret
CrowdStrike Falcon OAuth2 API Client Secret
.PARAMETER FalconAccessToken
Manually set the access token for the Falcon API. Used to bypass the OAuth2 authentication process to cut down on rate limiting. [default: $null]
.PARAMETER GetAccessToken
Returns an access token from the API credentials provided. Used to manually set the FalconAccessToken parameter.
.PARAMETER MemberCid
Member CID, used only in multi-CID ("Falcon Flight Control") configurations and with a parent management CID.
.PARAMETER ProxyHost
The proxy host for the sensor to use when communicating with CrowdStrike [default: $null]
.PARAMETER ProxyPort
The proxy port for the sensor to use when communicating with CrowdStrike [default: $null]
.PARAMETER Verbose
Enable verbose logging
#>

Examples:

To download the script:

Invoke-WebRequest -Uri https://raw.githubusercontent.com/crowdstrike/falcon-scripts/v1.6.0/powershell/install/falcon_windows_uninstall.ps1 -OutFile falcon_windows_uninstall.ps1

Basic example that will uninstall the sensor with the provided maintenance token

.\falcon_windows_uninstall.ps1 -MaintenanceToken <string>

An example using the Falcon API to retrieve the maintenance token and remove the host from the Falcon console after uninstalling.

.\falcon_windows_uninstall.ps1 -FalconClientId <string> -FalconClientSecret <string> -RemoveHost

Troubleshooting

To assist in troubleshooting the installation scripts, you can try the following:

• Use the -Verbose parameter to enable verbose logging.

  Note: This will display additional logging in the console, as well as in the log file.

  Example:

  .\falcon_windows_install.ps1 -Verbose -FalconClientId <string> -FalconClientSecret <string> -ProvToken <string>

• For a more detailed approach, you can use Set-PSDebug -Trace. This cmdlet offers three trace levels (0-2):

  • 0 : Turn script block logging off. (Equivalent to -Off)
  • 1 : Turn script block logging on. (Equivalent to -On)
  • 2 : Turn script block logging on and generate a trace of all commands in a script block and the arguments they were used with.

    Similar to the output of set -x in bash. Very noisy but contains a lot of useful information.

  Example:

  Set-PSDebug -Trace 2
  .\falcon_windows_install.ps1 -FalconClientId <string> -FalconClientSecret <string> -ProvToken <string>
  # To turn off tracing
  Set-PSDebug -Trace 0