BoardConfig.mk

#
# Copyright 2018 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This contains the module build definitions for the hardware-specific
# components for this device.
#
# As much as possible, those components should be built unconditionally,
# with device-specific names to avoid collisions, to avoid device-specific
# bitrot and build breakages. Building a component unconditionally does
# *not* include it on all devices, so it is safe even with hardware-specific
# components.

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-2a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := cortex-a75

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv8-a
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a75

# CPU
ENABLE_CPUSETS := true
ENABLE_SCHEDBOOST := true

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := sdm845
TARGET_NO_BOOTLOADER := true

# Kernel
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_TAGS_OFFSET := 0x00000100
BOARD_RAMDISK_OFFSET     := 0x01000000
BOARD_ROOT_EXTRA_FOLDERS := firmware bt_firmware dsp persist
BOARD_ROOT_EXTRA_SYMLINKS := /vendor/xrom:/xrom /vendor/ADF:/ADF /vendor/APD:/APD /vendor/asdf:asdf /vendor/factory:factory
BOARD_KERNEL_CMDLINE := androidboot.hardware=qcom androidboot.console=ttyMSM0 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true androidboot.usbcontroller=a600000.dwc3 firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
BOARD_KERNEL_CMDLINE += skip_override androidboot.fastboot=1
BOARD_KERNEL_CMDLINE += buildv=WW_user_90.11.162.72
BOARD_KERNEL_CMDLINE += androidboot.avb_version=0.0 androidboot.vbmeta.avb_version=0.0
#BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
#NEED_KERNEL_MODULE_SYSTEM := true
#TARGET_KERNEL_ARCH := arm64
#TARGET_KERNEL_CONFIG := Z01R_defconfig
#TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
#TARGET_KERNEL_SOURCE := kernel/asus/sdm845
TARGET_PREBUILT_KERNEL := device/asus/ASUS_Z01RD/prebuilt/Image.gz-dtb

# Platform
TARGET_BOARD_PLATFORM := sdm845
TARGET_BOARD_PLATFORM_GPU := qcom-adreno630

# Partitions
BOARD_FLASH_BLOCK_SIZE := 262144

# Partitions
BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2986344448
BOARD_USERDATAIMAGE_PARTITION_SIZE := 52554575872
BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824
BOARD_SYSTEMIMAGE_PARTITION_TYPE := ext4
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_USERIMAGES_USE_F2FS := true
TARGET_USERIMAGES_USE_EXT4 := true

# Use mke2fs to create ext4 images
TARGET_USES_MKE2FS := true

# Workaround for error copying vendor files to recovery ramdisk
TARGET_COPY_OUT_VENDOR := vendor

#Init
TARGET_INIT_VENDOR_LIB := libinit_ASUS_Z01RD
TARGET_RECOVERY_DEVICE_MODULES := libinit_ASUS_Z01RD

# Recovery
TARGET_OTA_ASSERT_DEVICE := ASUS_Z01RD
BOARD_HAS_LARGE_FILESYSTEM := true
BOARD_HAS_NO_SELECT_BUTTON := true

# Android Verified Boot
BOARD_AVB_ENABLE := false
BOARD_BUILD_DISABLED_VBMETAIMAGE := true

# Enable A/B Specific Flags
TARGET_NO_KERNEL := false
TARGET_NO_RECOVERY := false
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
BOARD_USES_RECOVERY_AS_BOOT := true
AB_OTA_UPDATER := true

# Crypto
TARGET_HW_DISK_ENCRYPTION := true
TW_INCLUDE_CRYPTO := true
PLATFORM_VERSION := 16.1.0
PLATFORM_SECURITY_PATCH := 2099-12-31
TARGET_CRYPTFS_HW_PATH := device/asus/ASUS_Z01RD/cryptfs_hw

# TWRP specific build flags
TW_THEME := portrait_hdpi
TW_SCREEN_BLANK_ON_BOOT := true
RECOVERY_SDCARD_ON_DATA := true
BOARD_HAS_NO_REAL_SDCARD := true
TARGET_RECOVERY_QCOM_RTC_FIX := true
TARGET_RECOVERY_PIXEL_FORMAT := "BGRA_8888"
TARGET_USE_CUSTOM_LUN_FILE_PATH := /config/usb_gadget/g1/functions/mass_storage.0/lun.%d/file
TW_BRIGHTNESS_PATH := "/sys/class/backlight/panel0-backlight/brightness"
TW_MAX_BRIGHTNESS := 255
TW_INCLUDE_NTFS_3G := true
TW_EXCLUDE_SUPERSU := true
TW_EXTRA_LANGUAGES := true
TW_INPUT_BLACKLIST := "hbtp_vm"
TW_EXCLUDE_DEFAULT_USB_INIT := true
TW_EXCLUDE_TWRPAPP := true
TW_NO_USB_STORAGE := true
TW_USE_TOOLBOX := true
TW_INCLUDE_REPACKTOOLS := true
TW_HAS_EDL_MODE := true
TARGET_RECOVERY_DEVICE_MODULES := tzdata
TARGET_RECOVERY_DEVICE_MODULES += android.hardware.boot@1.0
TWRP_INCLUDE_LOGCAT := true
TARGET_USES_LOGD := true
TW_Y_OFFSET := 80
TW_H_OFFSET := -80
USE_RECOVERY_INSTALLER := true
RECOVERY_INSTALLER_PATH := device/asus/ASUS_Z01RD/installer

AB_OTA_PARTITIONS += \
    boot \
    system \
    vendor \
    vbmeta \
    dtbo

# SHRP Parameters
# Path of your SHRP Tree
SHRP_PATH := device/asus/Z01R
# Maintainer name
SHRP_MAINTAINER := Aryan_Arora
# Device codename
SHRP_DEVICE_CODE := Z01R
# put this 0 if device has no EDL mode
SHRP_EDL_MODE := 1
SHRP_EXTERNAL := /external_sd
SHRP_INTERNAL := /sdcard
SHRP_OTG := /usb_otg
# Put 0 to disable flashlight
SHRP_FLASH := 1

# These are led paths, find yours then put here (Optional)
#SHRP_CUSTOM_FLASHLIGHT := true
#SHRP_FONP_1 := /sys/class/leds/led:torch_0/brightness
#SHRP_FONP_2 := /sys/class/leds/led:torch_1/brightness
#SHRP_FONP_3 := /sys/class/leds/led:switch/brightness

# Max Brightness of LED (Optional)
SHRP_FLASH_MAX_BRIGHTNESS := 200
# Check your device's recovery path, dont use blindly
SHRP_REC := DUMMY
# Use this flag only if your device is A/B
SHRP_AB := true
# Recovery Type (It can be treble,normal,SAR) [Only for About Section]
SHRP_REC_TYPE := Treble
# Recovery Type (It can be A/B or A_only) [Only for About Section]
SHRP_DEVICE_TYPE := A_B
# SHRP Padding Flag (Only for rounded corner devices.)
SHRP_STATUSBAR_RIGHT_PADDING := 40
SHRP_STATUSBAR_LEFT_PADDING := 40