diff --git a/libraries/AP_Scripting/applets/advance-wp.lua b/libraries/AP_Scripting/applets/advance-wp.lua new file mode 100644 index 0000000000000..eec8633a89317 --- /dev/null +++ b/libraries/AP_Scripting/applets/advance-wp.lua @@ -0,0 +1,168 @@ +--[[---------------------------------------------------------------------------- + +advance-wp ArduPilot Lua script + +Set WAYPT_ADVANCE to an aux function number (e.g. 300). +Set RCx_OPTION to the chosen aux function number (preferably on a momentary switch). + +When the RC switch is activated, waypoint index will be advanced to the next waypoint +(wraps to WP1 after the last waypoint). + +Mission Planner's Aux Function tab can be used in lieu of dedicating RC channels. + +Optionally: + Set WAYPT_ANNOUNCE to another aux function number (e.g. 301). + Set WAYPT_ANNOUNCE_S to desired interval (s) between waypoint announcements (0 to disable). + Set WAYPT_BUZ_ENABLE to 1 to enable buzzer feedback vs waypoint distance. + Set RCx_OPTION to the chosen aux function number. + + When the announce switch is activated, the current waypoint index, bearing, and distance + will be broadcast as a GCS message every WAYPT_ANNOUNCE_S seconds (useful when using a + telemetry link like "Yaapu" where named float values are not always readily displayed). + + If WAYPT_BUZ_ENABLE is set, the buzzer will increase in frequency and pitch as distance + to the selected waypoint decreases (useful if no telemetry source is readily available). + +CAUTION: This script is capable of engaging and disengaging autonomous control +of a vehicle. Use this script AT YOUR OWN RISK. + +-- Yuri -- Apr 2024 + +LICENSE - GNU GPLv3 https://www.gnu.org/licenses/gpl-3.0.en.html +------------------------------------------------------------------------------]] + +local RUN_INTERVAL_MS = 100 +local PARAM_TABLE_KEY = 193 +local PARAM_TABLE_PREFIX = 'WAYPT_' +local MAV_SEVERITY = { + EMERGENCY = 0, + ALERT = 1, + CRITICAL = 2, + ERROR = 3, + WARNING = 4, + NOTICE = 5, + INFO = 6, + DEBUG = 7 +} + +-- borrowed from Rover QuikTune +local function bind_param(name) + local p = Parameter() + assert(p:init(name), string.format("Advance WP: Could not find %s parameter", name)) + return p +end + +local function bind_add_param(name, idx, default_value) + assert(param:add_param(PARAM_TABLE_KEY, idx, name, default_value), + string.format('Could not add param %s', name)) + return bind_param(PARAM_TABLE_PREFIX .. name) +end + +local function get_wp_location(item) + local loc = Location() + loc:lat(item:x()) + loc:lng(item:y()) + loc:alt(math.floor(item:z() * 100)) + return loc +end + +local function get_pitch_by_distance(distance) + local max_distance = 300 + local min_distance = 0.01 + local total_notes = 73 + + distance = math.max(min_distance, math.min(distance, max_distance)) + local scale_factor = 105 -- scale factor adjusted for a good spread over the distance range + local log_ratio = math.log(max_distance / distance) + local max_log_ratio = math.log(max_distance / min_distance) -- max possible value of log_ratio + local log_distance_scaled = log_ratio / max_log_ratio * total_notes * scale_factor / 100 + local note_index = math.min(math.floor(log_distance_scaled), total_notes - 1) + + return 'N' .. math.max(1, note_index) +end + +local function get_buzz_interval(distance) + local max_distance = 100 + local min_distance = 0.01 + local max_interval = 2000 + local min_interval = 250 + + distance = math.max(min_distance, math.min(distance, max_distance)) + local interval = max_interval - (max_interval - min_interval) * ((max_distance - distance) / max_distance) + return math.floor(interval) +end + +assert(param:add_table(PARAM_TABLE_KEY, PARAM_TABLE_PREFIX, 4), 'Advance WP: Could not add param table') + +local WAYPT_ADVANCE = bind_add_param('ADVANCE', 1, 300) +local WAYPT_ANNOUNCE = bind_add_param('ANNOUNCE', 2, 301) +local WAYPT_ANNOUNCE_S = bind_add_param('ANNOUNCE_S', 3, 0) +local WAYPT_BUZ_ENABLE = bind_add_param('BUZ_ENABLE', 4, 1) + +local last_advance_sw_pos = -1 +local last_announce_ms = uint32_t(0) +local last_buzz_ms = uint32_t(0) +function update() + ---- WAYPT_ADVANCE ---- + local advance_opt = WAYPT_ADVANCE:get() + if not advance_opt then return update, RUN_INTERVAL_MS end + + local adv_sw_pos = rc:get_aux_cached(advance_opt) + if not adv_sw_pos then return update, RUN_INTERVAL_MS end + + local num_commands = mission:num_commands() + if num_commands < 1 then return update, RUN_INTERVAL_MS end + + if adv_sw_pos > 0 and adv_sw_pos ~= last_advance_sw_pos then + local nav_index = mission:get_current_nav_index() + local new_index = (nav_index + 1) % mission:num_commands() + mission:set_current_cmd(new_index) + gcs:send_text(MAV_SEVERITY.NOTICE, ('Advance WP -> %d'):format(mission:get_current_nav_index())) + end + last_advance_sw_pos = adv_sw_pos or 0 + + ---- WAYPT_ANNOUNCE ---- + local announce_s = WAYPT_ANNOUNCE_S:get() + if not announce_s then return update, RUN_INTERVAL_MS end + if announce_s <= 0 then return update, RUN_INTERVAL_MS end + + local announce_opt = WAYPT_ANNOUNCE:get() + if not announce_opt then return update, RUN_INTERVAL_MS end + + local ann_sw_pos = rc:get_aux_cached(announce_opt) + if not ann_sw_pos then return update, RUN_INTERVAL_MS end + + local now = millis() + + if ann_sw_pos > 0 then + -- to work when mission is inactive, need to convert current nav item to location + local nav_index = mission:get_current_nav_index() + local item = mission:get_item(nav_index) + local wp_loc = get_wp_location(item) + local cur_loc = ahrs:get_location() + if cur_loc then + local bearing = math.deg(cur_loc:get_bearing(wp_loc)) + local distance = cur_loc:get_distance(wp_loc) + + local buzz_enable = WAYPT_BUZ_ENABLE:get() + if buzz_enable and buzz_enable > 0 and now - last_buzz_ms > get_buzz_interval(distance) then + notify:play_tune('MFT240MSL8' .. get_pitch_by_distance(distance)) + last_buzz_ms = now + end + + if now - last_announce_ms > announce_s * 1000 then + gcs:send_text(MAV_SEVERITY.NOTICE, ('WP %d: %03.0f° / %.3fm'):format(nav_index, bearing, distance)) + last_announce_ms = now + end + elseif now - last_announce_ms > announce_s * 1000 then + gcs:send_text(MAV_SEVERITY.WARNING, 'Advance WP: Invalid AHRS location') + last_announce_ms = now + end + end + + return update, RUN_INTERVAL_MS +end + +gcs:send_text(MAV_SEVERITY.INFO, 'Advance WP Script Active') + +return update, RUN_INTERVAL_MS diff --git a/libraries/AP_Scripting/applets/advance-wp.md b/libraries/AP_Scripting/applets/advance-wp.md new file mode 100644 index 0000000000000..dd92415dce452 --- /dev/null +++ b/libraries/AP_Scripting/applets/advance-wp.md @@ -0,0 +1,34 @@ +# Advance Waypoint + +Advance Waypoint (`advance-wp.lua`) allows for advancing the current mission waypoint via an RC switch. When the RC switch state is high, the mission waypoint is advanced to the next waypoint (wraps back to WP 1 if the end of the mission is reached). + +## How to Use + +Install this script in the autopilot's SD card in the `APM/scripts` directory. Set SCR_ENABLE to 1 and reboot the autopilot. + +* Set WAYPT_ADVANCE to an available aux function (300 by default). +* Set RCx_OPTION to the chosen aux function number. Preferably, set this to a channel assigned to a momentary switch. + +Mission Planner's Aux Function tab can be used in lieu of dedicating an RC channel. + +## Additional Features + +If Yaapu telemetry (or similar) is in use on the RC transmitter, it may be useful to display bearing and distance to the currently selected waypoint in the messages view, regardless of flight mode or arming state. To enable this: + +* Set WAYPT_ANNOUNCE to another available aux function (301 by default). +* Set RCx_OPTION to the chosen aux function. +* Set WAYPT_ANNOUNCE_S to desired interval (in seconds) between waypoint announcements (0 disables the feature). + +As above, Mission Planner's Aux Function tab can be used in lieu of dedicating an RC channel. + +When the announce switch is activated, the current waypoint index, bearing, and distance will be broadcast as a GCS message every WAYPT_ANNOUNCE_S seconds. + +Additionally, there is an audio feedback feature: + +* Set WAYPT_BUZ_ENABLE to 1 to enable buzzer feedback (0 to disable). + +If WAYPT_BUZ_ENABLE is set, the buzzer will beep when the announce switch is activated, increasing in frequency and pitch as distance to the selected waypoint decreases (useful as a rangefinder for the selected waypoint if no telemetry source is readily available). + +### Author's Note + +I used this script to create a survey "prism pole" of sorts out of a spare autopilot, RTK GPS module/antenna, RC receiver, and telemetry radio. Using the existing SaveWP feature along with this script, I can save waypoints and subsequently relocate them precisely with the additional features above. \ No newline at end of file