-
Notifications
You must be signed in to change notification settings - Fork 39
/
Print_Settings_and_File_Key.txt
29 lines (26 loc) · 1.18 KB
/
Print_Settings_and_File_Key.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Primary Color: nothing at start of file name
Accent Color: [a]_ at start of file name
Quantity Required: _x# near end of file name
File Revision: _rev# at end of file name
Do not use XY compensation, hole shrinking compensation, or any
similar slicer setting that modifies the geometry to try to account
for shrinkage. Elephant foot compensation (also known as XY first
layer compensation) is okay.
Nozzle Size: 0.5mm
Recommended FDM Materials: ASA, Polymaker or 3DXTech Recommended
Alternate Approved FDM Materials: PC, 3DXTech Recommended
Layer Height: 0.20mm to 0.25mm
Extrusion Width: Forced 0.5mm
Infill Percentage: 40% minimum (at 0.8mm Width)
Infill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic
Wall Count: 3 minimum (at 0.5mm Width)
Solid Top/Bottom Layers: 4 minimum (at 0.5mm Height)
Nozzle Size: 0.4mm
Recommended FDM Materials: ASA, Polymaker or 3DXTech Recommended
Alternate Approved FDM Materials: PC, 3DXTech Recommended
Layer Height: 0.20mm to 0.25mm
Extrusion Width: 0.40 to 0.45mm
Infill Percentage: 40% minimum (at 0.6mm Width)
Infill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic
Wall Count: 4 minimum (at 0.4mm Width)
Solid Top/Bottom Layers: 4 minimum (at 0.25mm Height)