2.1.4

• Reset the General Medium Modular Tower Section's rescaleFactor back to 1, after forgetting about having changed it for a B9PS test.

2.1.3

• Added 20m extensions to the foot pads of the General and Flat Launch Bases so they will reach the ground when rescaled to a size that extends past the lanch pad static.
• Changed the tech tree nodes for some of the launch stands and umbilicals. All the historic launch stands and their accessories are now in the custom Launch Stands node. The General Round and Rectangle stands, the beam swing arms and all umbilicals are now in the start node.
• Removed Animated Attachment from the download and GitHub as it can cause major problems with other parts if it is installed. It is not needed for Modular Launch Pads, was only offered as aan option for the Launch Rails, so if you still want it, you have to get it yourself.
• The Hide_Parts patch now only runs if CommunityCategoryKit is intstalled.

2.1.2

• Greatly increased the evaDistance for all crew elevators so Kerbals on EVA can send the elevator car down as well as up.
• Added another MLP Example Craft File, #5

2.1.1

• Added missing Launch Plates tech tree node for the Unkerballed Start tree.
• Fixed typo in Mounting Platform description.

2.1.0

NEW	NEW	NEW	NEW	NEW

• All parts are now hidden from the stock Structural category. Use the custom CCK category tab or the stock custom category (which has subcategories) to find the parts. Delete the Hide_Parts.cfg in the Category folder if you want the parts back in the Structural tab.

• The former multi-size merged parts have been split off into separate parts, but the older internal part name is still used for one the new parts. Existing v2.0 craft files will still load, but most likely won't look the same, and will need to be rebuilt.

• NEW: Historical launch stands for the Bluedog Design Bureau Vanguard, Redstone/Jupiter/Juno, Thor/Delta, Atlas and Titan II rockets, but can be used with other rockets of the same diameters.

• NEW: Historical service towers for the new historical launch stands. The Titan II tower comes in single-piece and modular section versions.

• NEW: Jupiter-style Petal Cover for the Redstone Launch Stand.

• NEW: Mercury-Atlas Crew Elevator, with separate Mercury-Atlas Crew Walkway. Walkway has switchable mounts for use with the smaller crew elevators.

• NEW: Atlas Mini Modular Tower, which serves as the historical Atlas tower. Has switchable styles for Agena and Centaur upper stages.

• NEW: Atlas-Agena and Atlas-Centaur retracting umbilical arms. The Centaur arms are also available as separate parts.

• NEW: Launch Plates, ultra-low profile flat clamp bases for the minimalist style. Thress sizes of round and square types.

• NEW: Falcon 9-style Launch Plate, and interim N1 and Energia Launch Plates.

• NEW: Mini Milkstool Launch Stands. These are small launch-clamp versions of the Saturn Milkstool, with three sizes, each with two height variants.

• NEW: Separate non-launch clamp versions of the Mini Milkstools, with built-in decouplers for use with Launch Plates and Launch Bases.

• NEW: Launch Rails, add-on part for Launch Stands, Plates and Bases. Four sizes with built-in decoupler, can be rotated with Animated Attachment or B9PartSwitch.

• NEW: Extra-Large General Service Tower, styled after the Titan III/IV fixed service tower.

• NEW: Titan III/IV Mast, the angled structure which was located on the Titan III/IV Mobile Launcher.

• NEW: Small General Crew Elevator, comprised of separate modular sections (base, multi-height core, top). Uses the Large General Arm, Small General Crew Arm or Mercury-Atlas Crew Walkway with appropriate mount types.

• NEW: Mini General Crew Elevator, comprised of separate 2-height core and multi-height tower sections. Uses the Small General Crew Arm or Mercury-Atlas Crew Walkway with appropriate mount types.

• NEW: Small General Crew Arm, with separate versions for the Small and Mini General Crew Elevators.

• NEW: Droop-style general umbilicals. Four sizes of simple bent-style umbilical hoses for a bit more realism.

• NEW: Two more sizes of the basic beam-style swing arms.

• NEW: Mini size General Fallback Tower, sized for Electron/Falcon 1-style rockets.

• NEW: Rodan Crew Access Arm, sized for the Tundra Exploration Rodan (SpaceX Crew Dragon) capsule, and used with the Shuttle FSS Tower.

• NEW: General Mounting Platform, an alternate version of the Mini Flat Launch Base, with solid deck, toggleable railings and side attach nodes. Use for supporting ground structures.

  REVISED REVISED REVISED REVISED

• REVISED: General Launch Stand has been split into separate Round and Rectangle versions, and both completely remade. Redstone-style service pole removed from Round version (now in the Redstone Launch Stand), but still available as a separate part.

• REVISED: Flat and General Launch Bases have been split into separate sizes, with added detail and hole options, and new ladders. Ladders and railings have separate switchable colors.

• REVISED: General Service Towers have been split into separate size versions, and each split into separate modular section parts: stackable core, multi-height section (except for the Extra-Large Tower) and top section with optional mast(s).

• REVISED: The former General Crew Elevator and Crew Arm have been renamed the Large General Crew Elevator and Crew Arm. Elevator has been split into modular section parts, with two versions of the base. Large Crew Arm has separate Large and Small Elevator mount types, and more length variants.

• REVISED: General Swing Arms have been split into separate size versions, and all completely remade.

• REVISED: General Straight Umbilicals remade.

• REVISED: Atlas V Service Mast and Delta II Service Tower, with additional details and/or changed styling. Separate modular section versions now available.

• REVISED: Former Small Test Stand had been split into three separate versions: Cradle type, Tower Type and Engine Type.

• REVISED: Flat Vertical Bolt General Hold-Down now has a tall bolt variant.

• REVISED: Saturn and Shuttle Towers have been split into separate modular sections, consisting of the base, multi-heght core, 2-height crew access and top.

• REVISED: Shuttle FSS tower sections have an alternate SpaceX-style black&white color scheme, and optional mesh side panels added.

• REVISED: Shuttle RSS Hinge has been split off into a separate part, with the detail being toggleable, and black color option added. Now the current state of the FSS on LC-39A can be recreated without having to add the full RSS.

• REVISED: Saturn Hammerhead Crane is now an animated part instead of free-rotating. The original-style lightning mast is included, also still available separately.

• REVISED: The tall white cylinder alternate Saturn Lightning Mast is now the Shuttle Lightning Mast with different mount options.

• REVISED: Saturn and Shuttle Launch Bases can now be properly rotated using B9PartSwitch--no more misaligned support legs!

• REVISED: Mass values for the Saturn and Shuttle tower sections have been reduced to tiny amounts.

• REVISED: The Freestanding versions of the Saturn and Shuttle Launch Bases (in the Extras folder of the download) now have switchable masses: 1 ton for transport, 2000 tons for on the launch pad.

• REVISED: Soyuz Launch Base parts now have a third blue color option, based on the ESA Soyuz pad colors.

• REVISED: Soyuz Large Fuel Arm, Small Fuel Arm and Gantry. More height options, straight-sided extension for the Small Arm and switchable-adjustable platform stack for the Gantry.

  GENERAL GENERAL GENERAL

• Extensive use of B9PartSwitch transform move and rotate, node move and UI Group features for smaller part sizes and easier to understand Part Action Windows.

• All launch clamp bases and stands can now have the staging disabled when a milkstool or launch rail or other part is attached to them.

• Various part title and description changes; part cost is now 1 for everything.

• Removed simple rescale patch from Extras. Realism Overhaul now directly supports Modular Launch Pads, ask the RO devs for additional support/help if needed, it is their responsibility.

• Remade all craft files for v2.1. Subassemblies removed, there are now four Example MLP craft files (with a stock rocket for demo purposes), along with bare versions of the Saturn and Shuttle launchers.

2.0.8

• Removed the integrated clamp arms, fuel arms and gantry from the Soyuz Launch Base. Attach them separately now; clamp arms surface attach, the fuel arms attach to the auxiliary nodes on the ring, and the gantry attaches to the auxiliary node in the center, below the rocket attach node.

• Added transfer airlocks to the gantry's crew elevator platforms, to allow crew boarding of a spacecraft inside a fairing via the crew transfer function.

• Updated B9PartSwitch to v2.13.0 for KSP 1.8.1, works in KSP 1.9.x. It is now the default B9PS in the download's GameData Folder.

• B9PartSwitch for KSP 1.7.3 is available as a separate .zip file in the root folder of the download.

• Updated Spacedock compatibility to KSP v1.9.

v2.0.7b

• Moved the KSP 1.7.3 version of B9PartSwitch .zip out of the download's GameData folder and into the top level; that was an error.
• The version of B9PartSwitch in the download's GameData Folder is for KSP 1.8.1 and is no longer a .zip file, it can be copied into your KSP's GameData folder as-is.

v2.0.7

• Modifed the sound effect of the General ROFI and Shuttle Tail Service Mast sparker by a large amount to make it much quieter.
• Changed .cfg and .mu names for the General Hold Downs and General ROFI
• Updated the stock custom category and custom tech tree node .cfgs to those of v2.1
• Now includes separate versions of B9PartSwitch for KSP 1.8.1 and KSP 1.7.3. Folders are named for which KSP version they are for.

2.0.6

• Added a drag cube definition (the one from the stock Mk1 Fuselage) to the parts with a deploy-limit adjustable animation to prevent the "Generating procedural drag cube" message spam in the console. Moving the deploy limit slider changes the shape of the part, and without a predefined drag cube, KSP will make, then remake again and again, a new procedural one.

2.0.5

• KSP 1.8: The current versions of B9PartSwitch, Animated Decouplers and Community Category Kit work in KSP 1.8 as is.

• When a 1.8 version of B9PS is released, it will be included in all future updates of Modular Launch Pads.

• Updated B9PartSwitch to v2.11.0; this one adds the ability to prevent B9PS modules from being moved to the end of the Part Action Window. It also fixes a bug with texture-switching on copied parts.

• Added lines to parts with B9PS modules to prevent them from being moved to end of Part Action Window.

• Removed alternate support columns from the Saturn and Shuttle clamp bases. They ended up outside the the base when the base was rotated.

• Adjusted General ROFI and Shuttle TSM sparker's burn time to a maximum of 15 seconds with full fuel amount.

• Renamed the alternate Saturn Lightning Mast to Shuttle Tower Lightning Mast.

• Added a Module Manager patch to hide the Modular Launch Pads parts from the stock Structural tab into the Extras folder.

• Added a basic Realism Overhaul compatibility patch into the Extras folder. I did not make this, I found it on the RO Discord server. It's just a simple rescale, TweakScale is not needed, and may not be complete or fully working.

• Removed KSP 1.3.1 versions of the dependencies, as almost all RO players use KSP 1.6.1 now.