QGCExternalLibs.pri

################################################################################
#
# (c) 2009-2020 QGROUNDCONTROL PROJECT <http://www.qgroundcontrol.org>
#
# QGroundControl is licensed according to the terms in the file
# COPYING.md in the root of the source code directory.
#
################################################################################

#
# [REQUIRED] Add support for <inttypes.h> to Windows.
#
WindowsBuild {
    INCLUDEPATH += libs/msinttypes
}

#
# [REQUIRED] Add support for the MAVLink communications protocol.
#
# By default MAVLink dialect is hardwired to arudpilotmega. The reason being
# the current codebase supports both PX4 and APM flight stack. PX4 flight stack
# only uses common MAVLink specifications, whereas APM flight stack uses custom
# MAVLink specifications which adds to common. So by using the adupilotmega dialect
# QGC can support both in the same codebase.

# Once the mavlink helper routines include support for multiple dialects within
# a single compiled codebase this hardwiring of dialect can go away. But until then
# this "workaround" is needed.

# In the mean time, it’s possible to define a completely different dialect by defining the
# location and name below.

# check for user defined settings in user_config.pri if not already set as qmake argument
isEmpty(MAVLINKPATH_REL) {
    exists(user_config.pri):infile(user_config.pri, MAVLINKPATH_REL) {
        MAVLINKPATH_REL = $$fromfile(user_config.pri, MAVLINKPATH_REL)
        message($$sprintf("Using user-supplied relativ mavlink path '%1' specified in user_config.pri", $$MAVLINKPATH_REL))
    } else {
        MAVLINKPATH_REL = libs/mavlink/include/mavlink/v2.0
    }
}

isEmpty(MAVLINKPATH) {
    exists(user_config.pri):infile(user_config.pri, MAVLINKPATH) {
        MAVLINKPATH     = $$fromfile(user_config.pri, MAVLINKPATH)
        message($$sprintf("Using user-supplied mavlink path '%1' specified in user_config.pri", $$MAVLINKPATH))
    } else {
        MAVLINKPATH     = $$SOURCE_DIR/$$MAVLINKPATH_REL
    }
}

isEmpty(MAVLINK_CONF) {
    exists(user_config.pri):infile(user_config.pri, MAVLINK_CONF) {
        MAVLINK_CONF = $$fromfile(user_config.pri, MAVLINK_CONF)
        message($$sprintf("Using user-supplied mavlink dialect '%1' specified in user_config.pri", $$MAVLINK_CONF))
    } else {
        MAVLINK_CONF = all
        message($$sprintf("Using MAVLink dialect '%1'.", $$MAVLINK_CONF))
    }
}

# If defined, all APM specific MAVLink messages are disabled
contains (CONFIG, QGC_DISABLE_APM_MAVLINK) {
    message("Disable APM MAVLink support")
    DEFINES += NO_ARDUPILOT_DIALECT
    CONFIG  += ArdupilotDisabled
} else {
    CONFIG  += ArdupilotEnabled
}

# Then we add the proper include paths dependent on the dialect.
INCLUDEPATH += $$MAVLINKPATH

count(MAVLINK_CONF, 1) {
    exists($$MAVLINKPATH/$$MAVLINK_CONF) {
        INCLUDEPATH += $$MAVLINKPATH/$$MAVLINK_CONF
        DEFINES += $$sprintf('QGC_USE_%1_MESSAGES', $$upper($$MAVLINK_CONF))
    } else {
        error($$sprintf("MAVLink dialect '%1' does not exist at '%2'!", $$MAVLINK_CONF, $$MAVLINKPATH_REL))
    }
} else {
    error(Only a single mavlink dialect can be specified in MAVLINK_CONF)
}

#
# [REQUIRED] Events submodule
HEADERS+= \
    libs/libevents/libevents/libs/cpp/common/event_type.h \
    libs/libevents/libevents/libs/cpp/generated/events_generated.h \
	libs/libevents/libevents/libs/cpp/parse/health_and_arming_checks.h \
	libs/libevents/libevents/libs/cpp/parse/parser.h \
    libs/libevents/libevents/libs/cpp/protocol/receive.h
SOURCES += \
    libs/libevents/libevents/libs/cpp/parse/health_and_arming_checks.cpp \
	libs/libevents/libevents/libs/cpp/parse/parser.cpp
INCLUDEPATH += \
    libs/libevents/libevents/libs/cpp
#
# [REQUIRED] shapelib library
INCLUDEPATH += libs/shapelib
SOURCES += \
    libs/shapelib/shpopen.c \
    libs/shapelib/safileio.c

#
# [REQUIRED] zlib library
WindowsBuild {
    INCLUDEPATH +=  $$SOURCE_DIR/libs/zlib/windows/include
    LIBS += -L$$SOURCE_DIR/libs/zlib/windows/lib
    LIBS += -lzlibstatic
} else {
    LIBS += -lz
}

#
# [REQUIRED] LZMA decompression library
HEADERS+= \
    libs/xz-embedded/linux/include/linux/xz.h \
    libs/xz-embedded/linux/lib/xz/xz_lzma2.h \
    libs/xz-embedded/linux/lib/xz/xz_private.h \
    libs/xz-embedded/linux/lib/xz/xz_stream.h \
    libs/xz-embedded/userspace/xz_config.h
SOURCES += \
    libs/xz-embedded/linux/lib/xz/xz_crc32.c \
    libs/xz-embedded/linux/lib/xz/xz_crc64.c \
    libs/xz-embedded/linux/lib/xz/xz_dec_lzma2.c \
    libs/xz-embedded/linux/lib/xz/xz_dec_stream.c
INCLUDEPATH += \
    libs/xz-embedded/userspace \
    libs/xz-embedded/linux/include/linux
DEFINES += XZ_DEC_ANY_CHECK XZ_USE_CRC64

# [REQUIRED] QMDNS Engine
HEADERS+= \
    libs/qmdnsengine_export.h \
    libs/qmdnsengine/src/src/bitmap_p.h \
    libs/qmdnsengine/src/src/browser_p.h \
    libs/qmdnsengine/src/src/cache_p.h \
    libs/qmdnsengine/src/src/hostname_p.h \
    libs/qmdnsengine/src/src/message_p.h \
    libs/qmdnsengine/src/src/prober_p.h \
    libs/qmdnsengine/src/src/provider_p.h \
    libs/qmdnsengine/src/src/query_p.h \
    libs/qmdnsengine/src/src/record_p.h \
    libs/qmdnsengine/src/src/resolver_p.h \
    libs/qmdnsengine/src/src/server_p.h \
    libs/qmdnsengine/src/src/service_p.h \
    libs/qmdnsengine/src/include/qmdnsengine/abstractserver.h \
    libs/qmdnsengine/src/include/qmdnsengine/bitmap.h \
    libs/qmdnsengine/src/include/qmdnsengine/browser.h \
    libs/qmdnsengine/src/include/qmdnsengine/cache.h \
    libs/qmdnsengine/src/include/qmdnsengine/dns.h \
    libs/qmdnsengine/src/include/qmdnsengine/hostname.h \
    libs/qmdnsengine/src/include/qmdnsengine/mdns.h \
    libs/qmdnsengine/src/include/qmdnsengine/message.h \
    libs/qmdnsengine/src/include/qmdnsengine/prober.h \
    libs/qmdnsengine/src/include/qmdnsengine/provider.h \
    libs/qmdnsengine/src/include/qmdnsengine/query.h \
    libs/qmdnsengine/src/include/qmdnsengine/record.h \
    libs/qmdnsengine/src/include/qmdnsengine/resolver.h \
    libs/qmdnsengine/src/include/qmdnsengine/server.h \
    libs/qmdnsengine/src/include/qmdnsengine/service.h
SOURCES += \
    libs/qmdnsengine/src/src/abstractserver.cpp \
    libs/qmdnsengine/src/src/bitmap.cpp \
    libs/qmdnsengine/src/src/browser.cpp \
    libs/qmdnsengine/src/src/cache.cpp \
    libs/qmdnsengine/src/src/dns.cpp \
    libs/qmdnsengine/src/src/hostname.cpp \
    libs/qmdnsengine/src/src/mdns.cpp \
    libs/qmdnsengine/src/src/message.cpp \
    libs/qmdnsengine/src/src/prober.cpp \
    libs/qmdnsengine/src/src/provider.cpp \
    libs/qmdnsengine/src/src/query.cpp \
    libs/qmdnsengine/src/src/record.cpp \
    libs/qmdnsengine/src/src/resolver.cpp \
    libs/qmdnsengine/src/src/server.cpp \
    libs/qmdnsengine/src/src/service.cpp
INCLUDEPATH += \
    libs/ \
    libs/qmdnsengine/src/include/ \
    libs/qmdnsengine/src/src/

#
# [REQUIRED] SDL dependency. Provides joystick/gamepad support.
# The SDL is packaged with QGC for the Mac and Windows. Linux support requires installing the SDL
# library (development libraries and static binaries).
#
MacBuild {
    INCLUDEPATH += \
        $$SOURCE_DIR/libs/Frameworks/SDL2.framework/Headers
    LIBS += \
        -F$$SOURCE_DIR/libs/Frameworks \
        -framework SDL2
} else:LinuxBuild {
    PKGCONFIG = sdl2
} else:WindowsBuild {
    INCLUDEPATH += $$SOURCE_DIR/libs/sdl2/msvc/include
    INCLUDEPATH += $$SOURCE_DIR/libs/OpenSSL/Windows/x64/include
    LIBS += -L$$SOURCE_DIR/libs/sdl2/msvc/lib/x64
    LIBS += -lSDL2
}

# Include Android OpenSSL libs
AndroidBuild {
    include($$SOURCE_DIR/libs/OpenSSL/android_openssl/openssl.pri)
    #message("ANDROID_EXTRA_LIBS")
    #message($$ANDROID_TARGET_ARCH)
    #message($$ANDROID_EXTRA_LIBS)
}

#
# [OPTIONAL] Zeroconf for UDP links
#
contains (DEFINES, DISABLE_ZEROCONF) {
    message("Skipping support for Zeroconf (manual override from command line)")
    DEFINES -= DISABLE_ZEROCONF
# Otherwise the user can still disable this feature in the user_config.pri file.
} else:exists(user_config.pri):infile(user_config.pri, DEFINES, DISABLE_ZEROCONF) {
    message("Skipping support for Zeroconf (manual override from user_config.pri)")
# Mac support is built into OS
} else:MacBuild|iOSBuild {
    message("Including support for Zeroconf (Bonjour)")
    DEFINES += QGC_ZEROCONF_ENABLED
} else {
    message("Skipping support for Zeroconf (unsupported platform)")
}

# UTM Adapter Enabled
contains (DEFINES, CONFIG_UTM_ADAPTER){
    INCLUDEPATH += $$PWD/libs/libevents/libevents/libs/cpp/parse/nlohmann_json/include
    LIBS += -lboost_system -lboost_thread -lssl -lcrypto
}

HEADERS += \
    libs/GeographicLib/Constants.hpp \
    libs/GeographicLib/Math.hpp \
    libs/GeographicLib/Utility.hpp \
    libs/GeographicLib/UTMUPS.hpp \
    libs/GeographicLib/MGRS.hpp \
    libs/GeographicLib/TransverseMercator.hpp \
    libs/GeographicLib/PolarStereographic.hpp \

SOURCES += \
    libs/GeographicLib/Math.cpp \
    libs/GeographicLib/Utility.cpp \
    libs/GeographicLib/UTMUPS.cpp \
    libs/GeographicLib/MGRS.cpp \
    libs/GeographicLib/TransverseMercator.cpp \
    libs/GeographicLib/PolarStereographic.cpp \

INCLUDEPATH += \
    libs \
    libs/GeographicLib