diff --git a/packages/hms_room_kit/README.md b/packages/hms_room_kit/README.md
index ba615969b..8cc708a0d 100644
--- a/packages/hms_room_kit/README.md
+++ b/packages/hms_room_kit/README.md
@@ -55,6 +55,198 @@ HMSPrebuilt(
);
```
+## Overview
+
+This guide will walk you through simple instructions to create a video conferencing app using 100ms Prebuilt and and test it using an emulator or your mobile phone.
+
+## Create a sample app
+
+This section contains instructions to create a simple Flutter video conferencing app. We will help you with instructions to understand the project setup and complete code sample to implement this quickly.
+
+### Prerequisites
+
+To complete this implementation for the Android platform, you must have the following:
+
+- A [100ms account](https://dashboard.100ms.live/register) if you don't have one already.
+- [Flutter](https://docs.flutter.dev/get-started/install) `3.3.0` or higher
+- Dart `2.12.0` or above
+- Use [VS code](https://code.visualstudio.com/), [Android Studio](https://developer.android.com/studio), or any other IDE that supports Flutter. For more information on setting up an IDE, check [Flutter's official guide](https://docs.flutter.dev/get-started/editor).
+
+### Create a Flutter app
+
+Once you have the prerequisites, follow the steps below to create a Flutter app. This guide will use VS code, but you can use any IDE that supports Flutter.
+
+- Create a Flutter app using the terminal; you can get the [Flutter SDK](https://docs.flutter.dev/get-started/install/macos#get-sdk) and use the below command:
+
+ ```bash section=createFlutterApp
+ flutter create my_app
+ ```
+
+- Once the app is created, open it in VS code.
+
+### Add 100ms room kit to your project
+
+[](https://pub.dev/packages/hms_room_kit)
+
+Once you have created a Flutter app, you must add the `hms_room_kit` package to your project.
+
+In project's `pubspec.yaml` file, under dependencies section add the following:
+
+```yaml section=InstallingTheDependencies
+hms_room_kit:
+```
+
+- Run `flutter pub get` to download these dependencies to your app.
+
+### Application Setup
+
+
+
+
+
+Please follow the below instructions to test the app for the android target platform:
+
+1. Add minimum SDK version (`minSdkVersion 21`) in "android/app/build.gradle" file (inside "defaultConfig").
+
+```json
+...
+defaultConfig {
+ ...
+ minSdkVersion 21
+ ...
+}
+...
+```
+
+2. To add PIP support in your app manifest files add:
+
+```xml
+
+```
+
+3. For Auto Enter PIP support(below android 12) in your `MainActivity.kt` file add:
+
+```kotlin
+override fun onUserLeaveHint() {
+ super.onUserLeaveHint()
+ // This should only work for android version above 8 since PIP is only supported after
+ // android 8 and will not be called after android 12 since it automatically gets handled by android.
+ if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O && Build.VERSION.SDK_INT < Build.VERSION_CODES.S) {
+ HMSPipAction.autoEnterPipMode(this)
+ }
+}
+```
+
+4. For screenshare in your `MainActivity.kt` add:
+
+```kotlin
+override fun onActivityResult(requestCode: Int, resultCode: Int, data: Intent?) {
+super.onActivityResult(requestCode, resultCode, data)
+
+ if (requestCode == Constants.SCREEN_SHARE_INTENT_REQUEST_CODE && resultCode == Activity.RESULT_OK) {
+ data?.action = Constants.HMSSDK_RECEIVER
+ activity.sendBroadcast(data?.putExtra(Constants.METHOD_CALL, Constants.SCREEN_SHARE_REQUEST))
+ }
+}
+```
+
+5. Add the `FOREGROUND_SERVICE` permission in `AndroidManifest.xml`:
+
+```xml
+
+```
+
+
+
+
+
+Please follow the below instructions to test the app for iOS target platform
+
+1. Add the target platform version as (`platform :ios, '12.0'`) in "ios/Podfile"
+
+```json
+platform :ios, '12.0'
+```
+
+2. To add PIP support in your iOS app:
+
+- Minimum Requirements:
+ - Minimum iOS version required to support PiP is iOS 15
+ - Minimum `hmssdk_flutter` SDK version required is 1.3.0
+ - Your app should have [com.apple.developer.avfoundation.multitasking-camera-access](https://developer.apple.com/documentation/bundleresources/entitlements/com_apple_developer_avfoundation_multitasking-camera-access) Entitlement to use PiP Mode.
+
+Your app needs to run on iOS 13.5 or later to use the entitlement. Without the entitlement, the system disables the camera access for your app. When your app enters PIP mode, it needs this entitlement to continue using the camera.
+
+After you receive permission from Apple, add the Entitlement to your app by opening the Entitlements file in Xcode. Add the key and set the corresponding value to YES.
+
+
+
+3. To add screen share support in iOS app, checkout the docs [here](https://www.100ms.live/docs/flutter/v2/how-to-guides/set-up-video-conferencing/screen-share#ios-setup)
+
+4. Pass the `iOSScreenshareConfig` in `HMSPrebuiltOptions` parameter of `HMSPrebuilt` widget to enable screen share in your app.
+
+```dart
+// Pass the correct App Group & Preferred Extension parameters in HMSIOSScreenshareConfig class.
+HMSPrebuilt(
+ roomCode: meetingLinkController.text.trim(),
+ options: HMSPrebuiltOptions(
+ iOSScreenshareConfig: HMSIOSScreenshareConfig(
+ appGroup: "appGroup", // App Group value linked to your Apple Developer Account
+ preferredExtension: "preferredExtension" // Name of the Broadcast Upload Extension Target created in Xcode
+)));
+```
+
+
+
+### Add the 100ms room kit to your app
+
+We will be adding a join button to the app, on the button click we will route the user to the 100ms room kit. To do this, follow the steps below:
+
+1. Add the below code for `Join` button in `lib/main.dart` file:
+
+```dart
+Scaffold(
+ body: Center(
+ child: ElevatedButton(
+ style: ButtonStyle(
+ shape: MaterialStateProperty.all(
+ RoundedRectangleBorder(
+ borderRadius: BorderRadius.circular(8.0),
+ ))),
+ onPressed: () async => {
+ ///Here will route the user to the 100ms room kit
+ },
+ child: const Padding(
+ padding: EdgeInsets.symmetric(vertical: 20, horizontal: 20),
+ child: Text(
+ 'Join',
+ style: TextStyle(fontSize: 20),
+ ),
+ ),
+ ),
+ ),
+);
+```
+
+2. Update the code in the `onPressed` method of the `Join` button by following code:
+
+```dart
+ onPressed: () async => {
+ await Navigator.push(
+ context,
+ MaterialPageRoute(
+ builder: (context) => const HMSPrebuilt(roomCode: "xno-jwn-phi")
+ ),
+ ),
+}
+```
+
+
+
That's it. You can now use the amazing prebuilt ui in your application.
📖 Do refer the Complete Documentation Guide [available here](https://www.100ms.live/docs/flutter/v2/guides/quickstart).